Page 76

TECNICAL SIDE BENCH TEST - PART II

HOW TO DEAL WITH... HEADS In the last issue, we dealt with the most common test benches; that is, the ones with rollers: how they are made, how you measure torque, the importance of having the right sized roller relative to the performance you are measuring and the characteristics that good software must have to be able to do all this. However, there is something missing, something very important, which we only just mentioned here and there, that something is, how a good “roll” should be carried out properly. REPORT: SIMONE SUARDI

76 VROOM INTERNATIONAL MAGAZINE

Vroom Kart International #183 - September 2016  

In this issue: FANTASTIC 4 Marco Ardigò (Tony Kart/Vortex – KZ), Fabian Federer (CRG/Modena Engines – KZ2), Pedro Hiltbrand (CRG/Parilla –...

Vroom Kart International #183 - September 2016  

In this issue: FANTASTIC 4 Marco Ardigò (Tony Kart/Vortex – KZ), Fabian Federer (CRG/Modena Engines – KZ2), Pedro Hiltbrand (CRG/Parilla –...

Advertisement