DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Command
Parameters <auth_string 32>
delete snmp host
<ipaddr>
show snmp host
<ipaddr>
create trusted_host
<ipaddr>| network<network_address> {snmp | telnet | ssh | http | https}
config trusted_host
[<ipaddr> | network <network_address>] [add|delete] {snmp | telnet | ssh | http | https}
delete trusted_host
[all | ipaddr<ipaddr>| network<network_address>]
show trusted_host enable snmp traps enable snmp authenticate traps show snmp traps disable snmp traps disable snmp authenticate traps config snmp system_contact
<sw_contact>
config snmp system_location
<sw_location>
config snmp system_name
<sw_name>
enable rmon disable rmon
Each command is listed, in detail, in the following sections.
create snmp user Purpose Syntax
Description
Used to create a new SNMP user and adds the user to an SNMP group that is also created by this command. create snmp user <snmp_username 32> <groupname 32> {encrypted [by_password auth [md5 <auth_password 8-16> | sha <auth_password 8-20>] priv [none | des <priv_password 8-16>] | by_key auth [md5 <auth_key 32-32> | sha <auth_key 40-40>] priv [none | des <priv_key 32-32> ]]} The create snmp user command creates a new SNMP user and adds the user to an SNMP group that is also created by this command. SNMP ensures: Message integrity − Ensures that packets have not been tampered with during transit. Authentication − Determines if an SNMP message is from a valid source. Encryption − Scrambles the contents of messages to prevent it from being viewed by an unauthorized source.
Parameters
<snmp_username 32> − An alphanumeric name of up to 32 characters that will identify the new SNMP user. <groupname 32> − An alphanumeric name of up to 32 characters that will identify the SNMP group the new SNMP user will be associated with. encrypted – Allows the user to choose a type of authorization for authentication using SNMP. The user may choose: by_password – Requires the SNMP user to enter a password for authentication and privacy. The password is defined by specifying the auth_password below. This method is recommended. by_key – Requires the SNMP user to enter a encryption key for authentication and
33