Page 1


Table of Contents Victor® Outfits . . . . . . . . . . . . . . . . . . . . . . Regulators/Flowmeters . . . . . . . . . . . . . Torch Handles/Cutting Attachments/Nozzles . . Straight Cutting Torches . . . . . . . . . . . . . Automation Gas Equipment . . . . . . . . . . . CutSkill® Equipment . . . . . . . . . . . . . . . FirePower® Equipment . . . . . . . . . . . . . Cutting Tips & Tip Charts . . . . . . . . . . . . Safety Accessories . . . . . . . . . . . . . . . Equipment Reference Guide & Regulator Matrix

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . 4-6 . . 7-8 . . .9 . . 10 . . 12 13-14 . . 15 16-17 18-19 20-21

Victor Specialty Products Regulators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-23 Manifolds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Victor Medical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 TurboTorch® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-28 Tweco® MIG Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-31 MIG Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-33 Manual Arc Welding Equipment . . . . . . . . . . . . . . . . . . . . . . . 34-35

Tweco Robotics Quick Robotic MIG Guns & Accessories . . . . . . . . . . . . . . . . . . . 36-37 Fixed Automation MIG Guns & Accessories . . . . . . . . . . . . . . . . . 38-39

Arcair® Arc Gouging Equipment . . . . . . . Exothermic Cutting Equipment . . . Automated Metal-Removal Systems CutSkill Arc Gouging Equipment . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

40 41 42 42

Thermal Dynamics Automation Conventional Automated Systems . . . . . . . . . . . . . . . . . . . . . . 44-45 High Precision Automated Systems . . . . . . . . . . . . . . . . . . . . . 46-47

Thermal Dynamics® Manual Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48-49 Manual Torches and Consumables . . . . . . . . . . . . . . . . . . . . . 50-51 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52-53

Thermal Arc® Inverter Arc Welders . . . . . . . . . . . . . . . . . . . WeldSkill® MIG Arc Welders (including Synergic Pulse) . MIG Arc Welders . . . . . . . . . . . . . . . . . . . . . Plasma Arc Welders . . . . . . . . . . . . . . . . . . . Wire Feeders. . . . . . . . . . . . . . . . . . . . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

54-55 . . 55 . . 56 . . 57 . . 57

Stoody® Signature Products Selection Guide . . . . . . . . . . . . . . . . . . . . . 58-59 Stainless Steel Flux Cored Wires . . . . . . . . . . . . . . . . . . . . . . 60-63 Nickel Flux Cored Wires . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-65

Thermadyne® Warranty Information . . . . . . . . . . . . . . . . . . . . . . 66-67

22


Bringing You The Most Respected Names In Welding. ur company is comprised of many of the most respected market leading brands in the welding and metal fabricating industry. Thermadyne® product lines include oxy-fuel welding and cutting torches and regulators, plasma arc cutting and welding systems, arc welding power supplies, hardfacing and welding alloys, a wide array of manual and semi-automatic arc welding torches, tips and accessories, and high pressure gas control products. The scope of Thermadyne products allows the company to serve industries ranging from transportation and construction to mining, energy exploration, and a full range of manufacturing areas.

O

Thermadyne’s business philosophy is founded on a commitment to growth through strategic acquisitions, aggressive new product development, superior quality and reliability, and service excellence on a worldwide basis. Thermadyne remains at the forefront of welding technology holding more than 340 U.S. and foreign patents. Our products are designed to deliver added value for our customers through enhanced safety, improved efficiency and productivity, and an improved working environment. Service excellence is a long-standing tradition and trademark for Thermadyne companies, and we believe that excellent service is best defined by our customers. While we continually strive to raise our internal service quality standards and measurements, we also listen closely to our customers in all industries. Superior customer care extends far beyond our offices and manufacturing facilities. Thermadyne’s field sales representatives and technical support personnel are recognized as the finest in the industry providing unequaled levels of service and customer training.

3


Gas Equipment

Journeyman II Applications This heavy duty outďŹ t cuts up to 3/4" (19.1mm) or 8" (203.2mm) with optional tips. It welds up to 1/8" (3.2mm) or 3" (76.2mm) with optional nozzles.

Journeyman II Components

OutďŹ ts

s%333ERIESREGULATORS s&#TORCHHANDLEWITHBUILT IN ashback arrestors and check valves s#!CUTTINGATTACHMENT s7WELDINGNOZZLE SIZE s  CUTTINGTIP s4 GRADEHOSEgXMXMM s3TRIKERANDTIPCLEANER s3OFT SIDEDSHADEGOGGLES

VictorŽ Professional Equipment Victor is committed to providing superior quality and reliability that earn our customers’ confidence. Victor equipment and services are recognizably better than those of our competitors by consistently meeting customers expectations and by providing safe, reliable performance.

ContenderÂŽ

Victor Professional OutďŹ ts

This heavy duty outďŹ t cuts up to 3/4" (19.1mm) or 8" (203.2mm) with optional tips. It welds up to 3" (76.2mm) with optional nozzles.

For Acetylene, Hydrogen & Alternate Fuels Professional Series Welding, Cutting & Heating OUTFITS Standard Features Optimum Safety UĂŠ Ă•ÂˆÂ?ĂŒÂ‡ÂˆÂ˜ĂŠĂ€iĂ›iĂ€ĂƒiĂŠvÂ?ÂœĂœĂŠVÂ…iVÂŽĂŠĂ›>Â?Ă›iĂƒĂŠ>˜`ĂŠvÂ?>ĂƒÂ…L>VÂŽĂŠ>ÀÀiĂƒĂŒÂœĂ€Ăƒ UĂŠ˜VÂ?Ă•`iĂƒĂŠ/ĂŠ}Ă€>`iĂŠÂ…ÂœĂƒiĂŠvÂœĂ€ĂŠĂ•ĂƒiĂŠĂœÂˆĂŒÂ…ĂŠ>Â˜ĂžĂŠvĂ•iÂ?ĂŠ}>Ăƒ UĂŠ-iÂ?v‡ÀiĂƒi>ĂŒÂˆÂ˜}ĂŠĂ€iÂ?ˆivĂŠĂ›>Â?Ă›iĂŠÂŤĂ€ÂœĂŒiVĂŒĂƒĂŠĂ€i}Ă•Â?>ĂŒÂœĂ€ Cutting Attachment UĂŠ"ÂŤiĂ€>ĂŒiĂƒĂŠĂœÂˆĂŒÂ…ĂŠ>Â˜ĂžĂŠvĂ•iÂ?ĂŠ}>Ăƒ UiiĂŒĂƒĂŠĂŒÂ…ÂˆĂ€`ĂŠÂŤ>Ă€ĂŒĂžĂŠÂ?ÂˆĂƒĂŒÂˆÂ˜}ĂŠĂŒÂ…>ĂŒĂŠVœ˜vÂœĂ€Â“ĂƒĂŠĂŒÂœĂŠ ĂŠ ‡{°

Contender Components s%333ERIESREGULATORS s&#TORCHHANDLEWITHBUILT IN ashback arrestors and check valves s#!CUTTINGATTACHMENT s-&!HEATINGNOZZLE SIZE s  CUTTINGTIP s4 GRADEHOSEgXMXMM s3TRIKER

JourneymanÂŽ

Contender AF

Applications

Applications

This heavy duty outďŹ t cuts up to 3/4" (19.1mm) or 8" (203.2mm) with optional tips. It welds up to 1/2" (12.7mm) or 3" (76.2mm) with optional nozzles.

This heavy duty outďŹ t is capable of cutting up to 8" (204mm) with the appropriate cutting tip.

Journeyman Components s%333ERIESREGULATORS s(&#TORCHHANDLEWITHBUILT IN ashback arrestors and check valves s#!CUTTINGATTACHMENT s7WELDINGNOZZLES SIZES   s-&!HEATINGNOZZLE SIZE s  CUTTINGTIP s4 GRADEHOSEgXMXMM s3TRIKERANDTIPCLEANER s3OFT SIDEDSHADEGOGGLES

4

Applications

Contender AF Components s%333ERIESREGULATORS s&#WELDINGHANDLEWITHBUILT IN ashback arrestors and check valves s#!CUTTINGATTACHMENT s4YPEHEATINGNOZZLE SIZE s  '0.CUTTINGTIP s4 GRADEHOSEgXMXMM s3TRIKER

U.S. Customer Care: 800-426-1888 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


Gas Equipment

For use with any fuel gas

Applications

UĂŠ"˜iĂŠVĂ•ĂŒĂŒÂˆÂ˜}ĂŠĂŒÂœĂ€VÂ…]ĂŠvÂœĂ€ĂŠĂ•ĂƒiĂŠĂœÂˆĂŒÂ…ĂŠ>Â?Â?ĂŠvĂ•iÂ?ĂŠ}>ĂƒiĂƒĂŠĂœÂˆĂŒÂ…ĂŠĂŒÂ…iĂŠÂŤĂ€ÂœÂŤiÀÊVĂ•ĂŒĂŒÂˆÂ˜}ĂŠĂŒÂˆÂŤÂ°

This medium duty outďŹ t cuts up to 1/2" MM ORMM WITHOPTIONAL tips. It welds up to 1/4" (6.4mm) or MM WITHOPTIONALNOZZLES

UĂŠĂ›>ˆÂ?>LÂ?iĂŠĂœÂˆĂŒÂ…ĂŠĂ‡xcĂŠÂœĂ€ĂŠÂ™Ă¤cĂŠÂ…i>`ĂŠ>˜}Â?iĂŠ`iÂŤi˜`ˆ˜}ĂŠÂœÂ˜ĂŠĂžÂœĂ•Ă€ĂŠÂ˜ii`°

OutďŹ ts

Professional Series SELECT CUTTING OUTFITS Standard Features

PerformerÂŽ

JourneymanÂŽ Select

Performer Components Applications

s%333ERIESREGULATORS s&#TORCHHANDLEWITHBUILT IN ashback arrestors and check valves s#!CUTTINGATTACHMENT s-&! HEATINGNOZZLE SIZE s7 WELDINGNOZZLE SIZE s  CUTTINGTIP s4 GRADEHOSEgXMXMM s3TRIKERANDTIPCLEANER s3OFT SIDEDSHADEGOGGLES

This heavy duty outďŹ t cuts up to 8" (203.2mm) and welds up to 3" (76.2mm) with accessories.

Components s&#TORCHHANDLEWITHBUILT INmASHBACKARRESTORS and check valves s#!CUTTINGATTACHMENT s#323ERIESREGULATORS s!VAILABLEWITHÂŞORÂŞHEADANGLE

Portable Tote

Cutter Select ™ (ST 2600FC)

Applications

Applications

This medium duty portable outďŹ t cuts up to 1/2" (12.7mm) or 4" (101.6mm) with optional tips. It welds up to 1/4" (6.4mm) or MM WITHOPTIONALNOZZLES

This heavy duty outďŹ t cuts up to 8" (203.2mm) with accessories.

Components s34&#CUTTINGTORCHWITHBUILT IN ashback arrestors and check valves s%333ERIESREGULATORS s!VAILABLEWITHªORªHEADANGLE

Portable Tote Components s#323ERIESREGULATORS s&#TORCHHANDLEWITHBUILT IN ashback arrestors and check valves s#!CUTTINGATTACHMENT s7 WELDINGNOZZLE SIZE s3ERIESCUTTINGTIP s4 GRADEHOSEgX (3.8m x 4.8mm) s3TRIKERANDGOGGLES

Cutter Select Applications

4HISHEAVYDUTYOUTlTCUTSUPTOMM with accessories.

Optional sCUFT#'!ACETYLENECYLINDER sCUFT#'!OXYGENCYLINDER

Components s34&#CUTTINGTORCHBOTTOMREAR LEVERPOSITIONWITHBUILT INmASHBACK arrestors and check valves s#323ERIESREGULATORS s!VAILABLEWITHÂŞHEADANGLE

2EQUIRESSUFFICIENTACETYLENEOXYGENSUPPLY

See our full line catalog or visit us on the web at www.victorequip.com for more information.

(ST 1000FC)

Cutter Select Industrial Gas Equipment Catalog

(ST 900FC)

Applications 4HISHEAVYDUTYOUTlTCUTSUPTOMM with accessories.

Components s34&#CUTTINGTORCHTOPREAR LEVERPOSITIONWITHBUILT INmASHBACK arrestors and check valves s#323ERIESREGULATORS s!VAILABLEWITHÂŞORÂŞHEADANGLE

Industrial Gas Equipment Catalog (Form No. 65-2007) victorequip.com

International Customer Care: 940-381-1212 / www.victorequip.com

FAX 940-483-8178

5


Gas Equipment

Ordering Information Torch Handle

Welding Nozzle

Cutting Attachment

Cutting Tip

Heating Nozzle

0384-2035 Journeyman - Edge H 315FC

(W) 1,3,5

CA 2460

1-1-101

8-MFA

ESS4-125-540 ESS4-15-300

20' X 1/4"

0384-2036 Journeyman - Edge H 315FC

(W) 1,3,5

CA 2460

1-1-101

8-MFA

ESS4-125-540 ESS4-15-510

20' X 1/4"

0384-2040 Journeyman II - Edge 315FC

(W) 2

CA 2460

1-1-101

ESS4-125-540 ESS4-15-300

20' X 1/4"

0384-2041 Journeyman II - Edge 315FC

(W) 2

CA 2460

1-1-101

ESS4-125-540 ESS4-15-510

20' X 1/4"

Outfits

Part No.

Description

Oxygen Regulators

Fuel Gas Regulator

Hose

Accessories

Striker, Goggles & Cleaners

0384-2050

Contender®- Edge

315FC

CA 2460

1-1-101

6-MFA

ESS4-125-540 ESS3-15-510

20' X 1/4"

0384-2051

Contender®- Edge

315FC

CA 2460

1-1-101

6-MFA

ESS4-125-540 ESS4-15-300

20' X 1/4"

0384-2052 Contender® AF- Edge 315FC

CA 2460

1-1-GPN

8-55

0384-0812 Journeyman Select

315FC

CA 2460 - 90°

CSR 450D-540 CSR 460A-510

0384-0813 Journeyman Select

315FC

CA 2461 - 75°

CSR 450D-540 CSR 460A-510

0384-0814 Journeyman Select

315FC

CA 2460 - 90°

CSR 450D-540 CSR 460A-300

Striker ESS4-125-540 ESS3-15-510LP 20' X 1/4"

®

100FC

(W-1) 0

CA 1350

0-3-101

4-MFA-1

ESS3-125-540 ESS3-15-510 12.5' X 3/16"

®

100FC

(W-1) 0

CA 1350

0-3-101

4-MFA-1

ESS3-125-540 ESS3-15-300 12.5' X 3/16"

0384-2045 Performer - Edge 0384-2046 Performer - Edge

– Striker, Goggles & Cleaners Striker, Goggles & Cleaners

Outfits - Straight Torches Part No.

Description

Torch/Head Handle°

Oxygen Regulator

Fuel Gas Regulator

Fuel Gas

0384-2060

ST 2600FC Cutter Select - Edge

ST 2600FC 21" 90°

ESS4-125-540

ESS4-15-510

Acetylene

0384-2061

ST 2600FC Cutter Select - Edge

ST 2600FC 21" 90°

ESS4-125-540

ESS4-15-300

Acetylene

0384-2062

ST 2600FC Cutter Select - Edge

ST 2600FC 21" 90°

ESS4-125-540

ESS4-40-510LP

Propane/Natural Gas, Propylene

0384-0859

ST 1000FC Cutter Select

ST 1000FC 21" 90°

CSR 350D-540

CSR 360A-510

Acetylene

0384-0860

ST 1000FC Cutter Select

ST 1000FC 21" 90°

CSR 350D-540

CSR 360A-300

Acetylene

0384-0853

ST 900FC Cutter Select

ST 900FC 21" 90°

CSR 350D-540

CSR 360A-510

Acetylene

0384-0854

ST 900FC Cutter Select

ST 900FC 21" 90°

CSR 350D-540

CSR 360A-300

Acetylene

0384-0855

ST 901FC Cutter Select

ST 901FC 21" 75°

CSR 350D-540

CSR 360A-510

Acetylene

0384-0857

ST 900FC Cutter Select

ST 900FC 21" 90°

CSR 350A-540

CSR 361B-510

Propane/Natural Gas, Propylene

Portable Tote Kits

6

Part No.

Description

Torch Handle

Welding Nozzle

Cutting Cutting Attachment Tip

0384-0936

Portable Tote w/Cyl

100FC

(W-1) 1

CA 1350

0384-0935

Portable Tote w/o Cyl

100FC

(W-1) 1

CA 1350

Heating Nozzle

Oxygen Regulators

Fuel Gas Regulators

0-3-101

CSR 150CR-540

CSR 160AR (MC)

0-3-101

CSR 150CR-540

Accessories

“T” Grade 12.5' X 3/16" Hose, CSR 160AR (MC) Goggles & Lighter

U.S. Customer Care: 800-426-1888 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


Gas Equipment

700 Series

SR 350 Series

Single & Two Stage Cylinder Type Regulators

Single Stage Cylinder Type Regulators

s%XTRAHEAVYDUTY s(IGHFLOWRATEn5PTO 3#&( s Forged brass body and housing cap sGAUGESnBRASS sDIAPHRAGMnSTAINLESSSTEEL s-ANIFOLDMODELSAVAILABLE

s-EDIUMDUTY s Forged brass body and housing cap sGAUGESnBRASS sDIAPHRAGMnFABRICREINFORCEDNEOPRENE

EDGE ™ – ESS4 Series

SR 250 Series

Single Stage Regulators

Single & Two Stage Cylinder Type Regulators

s Heavy duty s High capacity s&ORGEDBRASSBODY:INC !LUMINUM housing cap s(IGHIMPACT!"3GAUGEGUARD s3,!-IMPACTABSORBINGSAFETYKNOB s#OLOR CODEDADJUSTMENTKNOBFORQUICK gas identification s-EETSOREXCEEDS#'!%  5,AND !34-' 0ROMOTED)GNITION4EST

Regulators / Flowmeters

VictorÂŽ Professional Regulators / Flowmeters

s-EDIUMDUTY s Forged brass body and housing cap s 2.0" gauges – brass sDIAPHRAGMnFABRICREINFORCEDNEOPRENE

450 Series

EDGE – ESS3 Flow Gauges

Single & Two Stage Cylinder Type Regulators

Single Stage Regulator Flowmeter

s Heavy duty s-EDIUMHIGHCAPACITY s Forged brass body and housing cap sGAUGESnBRASS sDIAPHRAGMnSTAINLESSSTEEL

s-EDIUMCAPACITY s&ORGEDBRASSBODY:INC !LUMINUM housing cap s(IGHIMPACT!"3GAUGEGUARD s3,!-IMPACTABSORBINGSAFETYKNOB s#OLOR CODEDADJUSTMENTKNOBFORQUICK gas identification s-EETSOREXCEEDS#'!%  5,AND !34-' 0ROMOTED)GNITION4EST

EDGE – ESS3 Series Single Stage Regulators s-EDIUMCAPACITY s&ORGEDBRASSBODY:INC !LUMINUM housing cap s(IGHIMPACT!"3GAUGEGUARD s3,!-IMPACTABSORBINGSAFETYKNOB s#OLOR CODEDADJUSTMENTKNOBFORQUICK gas identification s-EETSOREXCEEDS#'!%  5,AND !34-' 0ROMOTED)GNITION4EST

Check out our NEW innovative line of Victor Professional EDGE Series regulators for all gas types.

Welcome W elcome to life on the EDGE!

www.VictorEdge.com www VictorEdge com

International Customer Care: 940-381-1212 / www.victorequip.com

FAX 940-483-8178

7


Regulators / Flowmeters

Gas Equipment

AF 250 / CF 253

SR 4

Flowgauge Regulators

Single Stage Piston Style Regulator

s-EDIUMDUTY s Forged brass body and housing cap s 2" brass gauges s Delrin bushing s3INTEREDINLETFILTER sDIAPHRAGM

s High pressure delivery TO03)' s-ACHINEDBODYANDCAP s 2" gauges s Delrin bushing

HRF 2400

S 700 / S 350 / S 250

Single Stage Regulator Flowmeter

High Volume Station Regulators

s2EGULATOR&LOWMETERCOMBINATIONIN one compact unit s)DEALFOR-)'4)'APPLICATIONS s#ALIBRATEDTUBEAT03)' s#OVERTUBECONTAINSOVER pressure protection

s%XTRAHEAVYDUTY3 -EDIUMHEAVYDUTY3 AND ,IGHTDUTY3 s Forged brass body and housing cap s-AXIMUMINLETPRESSURE 3 03)' 3 03)' 3 03)' s Delrin bushing

DFM 150 Dual Flow

L 700 / L 350 / L 250

Dual Flow Regulator Flowmeter

High Volume Line Regulators

s Designed to monitor two separate processes of gas flow s Brass body s Teflon seat s3INTEREDINLETFILTER s,EXANCOVERTUBES s Brass piston s Aluminum ball (flowmeter version)

s(EAVYDUTY, MEDIUMHEAVYDUTY, AND LIGHTDUTY, s Forged brass body and housing cap s-AXIMUMINLETPRESSURE03)' s Delrin bushing

See page 18 for ordering information on available gauge guards.

8

U.S. Customer Care: 800-426-1888 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


Gas Equipment

Professional Series TORCH HANDLE Standard Features

Victor Professional Nozzles Type MFA (Acetylene)

UĂŠ ÂœĂ›iĂ€ĂƒĂŠ>ĂŠvĂ•Â?Â?ĂŠĂ€>˜}iĂŠÂœvĂŠĂœiÂ?`ˆ˜}]ĂŠVĂ•ĂŒĂŒÂˆÂ˜}ĂŠ>˜`ĂŠÂ…i>ĂŒÂˆÂ˜}ĂŠÂ˜ii`ĂƒÂ° UĂŠ->viĂŒĂžĂŠÂ‡ĂŠ Ă•ÂˆÂ?ĂŒÂ‡ÂˆÂ˜ĂŠvÂ?>ĂƒÂ…L>VÂŽĂŠ>ÀÀiĂƒĂŒÂœĂ€ĂƒĂŠ>˜`ĂŠĂ€iĂ›iĂ€ĂƒiĂŠvÂ?ÂœĂœĂŠVÂ…iVÂŽĂŠĂ›>Â?Ă›iĂƒÂ°

Heavy Duty Heating Nozzle

UĂŠ/Â…Ă€i>`i`ĂŠ>ĂƒĂƒi“LÂ?ÞÊvÂœĂ€ĂŠiVœ˜œ“ˆV>Â?ĂŠĂƒiĂ€Ă›ÂˆVi°

-ULTI FLAMEHEATINGHEADFORHEATTREAT ing, straightening & priming. s3IZESFORUSEWITH($# torch handle and 3/8" hose s3MALLERSIZESAVAILABLEFORUSE WITH3ERIESTORCHHANDLES

UiiĂŒĂƒĂŠĂŒÂ…ÂˆĂ€`ĂŠÂŤ>Ă€ĂŒĂžĂŠÂ?ÂˆĂƒĂŒÂˆÂ˜}ĂŠĂŒÂ…>ĂŒĂŠVœ˜vÂœĂ€Â“ĂƒĂŠĂŒÂœĂŠ ĂŠ ‡{°

HD 310C Victor Heavy Industry Torch Handle 4HE ($ # IS COMPATIBLE WITH high capacity heating nozzles and is performance matched to the #!3ERIESCUTTINGATTACHMENT s"UILT INREVERSEFLOWCHECKVALVES

Type MFA-1 (Acetylene) Medium Duty Heating Nozzle -ULTI FLAMEHEATINGHEADFORHEATTREAT ing, straightening & priming. s5SEWITH3ERIESTORCH handles

H 315FC / 315FC Heavy Duty Torch Handles s4HE#!3ERIESCUTTING attachment is performance MATCHEDTOBOTHTHE(&# AND&#TORCHHANDLE s(&#ISAHIGHFLOWTORCHHANDLE s"UILT INFLASHBACKARRESTORSANDREVERSEFLOWCHECKVALVES

100FC Medium Duty Torch Handle s4HE#!3ERIESCUTTINGATTACHMENTIS PERFORMANCEMATCHEDTOTHE&#TORCHHANDLE s"UILT INFLASHBACKARRESTORSANDREVERSEFLOWCHECKVALVES

Type MFN

Torch Handles/Cutting Attachments/Nozzles

VictorÂŽ Professional Torch Handles

(Propane / Natural Gas)

Heavy Duty Heating Nozzle -ULTI FLAME HEATING HEAD FOR HEAT treating, straightening & priming. s3IZES FORUSEWITH($ #TORCHHANDLEANDHOSE s3ERIESTORCHHANDLESUSESIZE 8 & 10 s3ERIESTORCHESUSE 4YPE-&. 

Type 55

(All Alternate Fuel Gases)

Heavy Duty Heating Nozzle

Victor Professional Cutting Attachments Professional Series CUTTING ATTACHMENT Standard Features For use with any fuel gas UĂŠ"˜iĂŠVĂ•ĂŒĂŒÂˆÂ˜}ĂŠ>ĂŒĂŒ>V…“iÂ˜ĂŒĂŠÂœĂ€ĂŠĂŒÂœĂ€VÂ…]ĂŠvÂœĂ€ĂŠĂ•ĂƒiĂŠĂœÂˆĂŒÂ…ĂŠ>Â?Â?ĂŠvĂ•iÂ?ĂŠ}>ĂƒiĂƒĂŠĂœÂˆĂŒÂ…ĂŠĂŒÂ…iĂŠÂŤĂ€ÂœÂŤiÀÊVĂ•ĂŒĂŒÂˆÂ˜}ĂŠĂŒÂˆÂŤÂ°

-ULTI FLAME HEATING HEAD FOR HEAT treating, straightening & priming. s3IZES FORUSEWITH($ #TORCHHANDLESANDHOSE s3MALLER SIZES AVAILABLE FOR USE WITH3ERIESTORCHHANDLES

CA 2460 Series Type W

Heavy Duty Cutting Attachment 4HE#!3ERIESCUTTINGATTACHMENT is performance matched for use with ( &#ANDTHE&#TORCHHANDLE

(Acetylene)

Heavy Duty Heating Nozzle

Cutting RangeMM

'ENERALPURPOSEWELDINGPRE HEATING sƒTIPANGLE s5SEWITH3ERIESTORCH handles

CA 1350 Series

Type W-1

Medium Duty Cutting Attachment

Medium Duty Heating Nozzle

Head AnglesÂŞ ÂŞ ÂŞ

4HE#!3ERIESCUTTINGATTACHMENT is performance matched for use with THE&#TORCHHANDLE

(Acetylene)

'ENERALPURPOSEWELDING PRE HEATING s5SEWITH3ERIESTORCHHANDLES

Head AnglesÂŞ ÂŞ ÂŞ Cutting Range:MM

International Customer Care: 940-381-1212 / www.victorequip.com

FAX 940-483-8178

9


Gas Equipment

VictorÂŽ Heavy Industry Straight Cutting Torches

Professional Series STRAIGHT CUTTING TORCH Standard Features

HC 1500C Straight Cutting Torches

Victor Professional Straight Cutting Torches

Straight Cutting Torch without Built-in Flashback Arrestors. With Reverse Flow Check Valves For Use with Propane or Pressurized Natural Gas ONLY OPTIONS

Features

Head Angles: ÂŞ ÂŞ Torch Lengths:  

s#UTTINGCAPACITYCM s%XTRAHEAVYDUTY s HOSEDESIGN

For use with any fuel gas UĂŠ"˜iĂŠVĂ•ĂŒĂŒÂˆÂ˜}ĂŠ>ĂŒĂŒ>V…“iÂ˜ĂŒĂŠvÂœĂ€ĂŠĂ•ĂƒiĂŠĂœÂˆĂŒÂ…ĂŠ>Â?Â?ĂŠvĂ•iÂ?ĂŠ}>ĂƒiĂƒĂŠĂœÂˆĂŒÂ…ĂŠĂŒÂ…iĂŠÂŤĂ€ÂœÂŤiÀÊVĂ•ĂŒĂŒÂˆÂ˜}ĂŠĂŒÂˆÂŤÂ°

ST 2600FC Straight Cutting Torch s5SES3ERIESCUTTINGTIPS s For use with any fuel gas

OPTIONS

HC 1400 Straight Cutting Torch without Built-in Flashback Arrestors. Without Reverse Flow Check Valves For Use with Propane or Pressurized Natural Gas ONLY OPTIONS

Features

Head Angles: ÂŞ ÂŞ ÂŞ s#UTTINGCAPACITYCM s Use of high flow flashback arrestors Torch Lengths: 27", 36", 48", is recommended 60", 72", 96" s Use accessory reverse flow check valves s TUBEHEAVYDUTYDESIGN

Head Angles: ÂŞ ÂŞ ÂŞ Torch Lengths: 17", 21", 27", 36", 48", 72" Cutting Capacity: 8" (203.2mm)

ST 1000FC Straight Cutting Torch s5SES3ERIESCUTTINGTIPS s For use with any fuel gas

OPTIONS Head Angles: ÂŞ ÂŞ ÂŞ Torch Lengths: 17", 21", 36", 48" Cutting Capacity:MM

HC 1200C Straight Cutting Torch without Built-in Flashback Arrestors. With Reverse Flow Check Valves For Use with Propane or Pressurized Natural Gas ONLY LY OPTIONS

Features s#UTTINGCAPACITYCM s Use of high flow flashback arrestors is recommended s Best for high flow applications s TUBEDESIGN

Head Angles: ÂŞ ÂŞ ÂŞ Torch Lengths: 21", 36", 48", 60", 72", 84", 96"

HC 1100C

ST 900FC Straight Cutting Torch s5SES3ERIESCUTTINGTIPS s For use with any fuel gas

OPTIONS Head Angles: ÂŞ ÂŞ ÂŞ Torch Lengths: 17", 21", 27", 36", 48", 72", 96" Cutting Capacity:MM

Straight Torch Users Guide Straight Cutting Torch without Built-in Flashbackk Arrestors. With Reverse Flow Check Valves For Use with Propane or Pressurized Natural Gas ONLY OPTIONS Head Angles: ÂŞ ÂŞ ÂŞ Torch Lengths: 21", 36", 48", 60", 72"

Features s #UTTINGCAPACITYCM s Use of high flow flashback arres tors recommended s 5SE6ICTOR3ERIESCUTTINGTIPSFOR alt. fuel (not for acetylene) s ,OWPRESSUREMIXER s

10

s "UILT INREVERSEFLOWCHECKVALVES on Oxygen and fuel gas inlet s Ideal for scrap cutting s !VAILABLEWITH(ARRIS 3TYLEHEAD s Use Victor Bulldog™ cutting tips for best performance s  TUBELIGHTWEIGHTDESIGN

Torch Series CST ST ST ST HC HC HC HC

800FC** 900FC 1000FC 2600FC 1100C 1200C 1400 1500C

Gas Type

Cutting Capacity*

Multi-Fuel Multi-Fuel Multi-Fuel Multi-Fuel Propane/Natural Gas Propane/Natural Gas Propane/Natural Gas Propane/Natural Gas

4" 5" 5" 8" 14" 18" 30" 48"

*with optional tips. **not shown.

U.S. Customer Care: 800-426-1888 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


WORK WITH

THE BEST

Harry Cazett PROFESSION: Welder/Fabricator COMPANY: Harry’s Welding Service NAME:

JOURNEYMAN WELDER AND HIS TORCH JOB EXPERIENCE: Upon finishing welding school Harry Cazett purchased a Victor® Journeyman® torch. That same torch has lasted the entire length of his career as a water pipeline welder. In 1972 he opened Harry’s Welding Service, leasing out his welding truck to water companies. Nowadays Cazett is still in business for himself, taking contract jobs doing maintenance and repair on all sizes of water pipeline from 2” to 48”. TOOL OF CHOICE: Victor Journeyman Torch WHY THE VICTOR JOURNEYMAN? “Because in the 39 years since I purchased my Journeyman, I’ve never had one problem. I have to give credit to my Journeyman. It’s helped me get to where I am today.”

“Victor has helped me tell my story”

, A GLOBAL CUTTING AND WELDING LEADER, joins the American Welding Society in encouraging individuals to practice the art, craftsmanship and professions of welding, metalworking and fabrication. Victor ®, Thermal Dynamics®, Thermal Arc ®, Arcair ®, Tweco ®, Stoody ®, CIGWELD® and TurboTorch® are among the Thermadyne® family of brands that you can count on for safety, reliability and quality. www.thermadyne.com

Harry carries the torch... will you?


Automation Gas Equipment

Victor Professional Cutting Machine Automation Gas Equipment

VCM 200 Portable Cutting Machine 4HE VERSATILE 6#-  IS A PRECISION TRACTOR TYPE MACHINE THAT CAN BE USED ONITSOWNTRACKFORSTRAIGHT LINECUTTING and a variety of welding operations. Off track and with a radius rod assembly, THE 6#-  CAN BE USED FOR CIRCLE cutting.

Features

VictorŽ Professional Automation Equipment Victor is committed to providing superior quality, reliable automation equipment that earn our customers’ confidence. The following illustrates our offerings for quality automated gas equipment. Victor, committed to providing the best in quality, safety and reliability.

Victor Professional Machine Torches Victor machine torches are available in two and three hose models. Three hose torches are a high performance "straight through" design that minimizes turbulence and improves cut quality. Accessory reverse flow check valves are supplied for use at the torch inlet connections.

s,ARGETHUMBSCREWSFORHAND TIGHTADJUSTMENTS s#ONSTANTSPEED!#INDUCTIONMOTOR located opposite torch for cooler, more efficient operation s Dual drive controls & direct speed readout s#ONEDISCDRIVE s#OUNTER BALANCEDDESIGN FORTORCHRACKINGDISTANCEUPTOCM FROMTHEMACHINE s3PEEDCONSTANTOVERWIDERANGEOFTEMPERATURES s4ORCHHOLDERDESIGNEDFORMM DIAMETERTORCHES

Victor Professional Machine Accessories Model BHA 2 !DJUSTABLEHEADADDSFLEXIBILITYTOMACHINECUTTING torches by allowing bevel cuts without changing the POSITIONOFTHETORCH#ANBESETATANYANGLEFROM ÂŞTOÂŞONEITHERSIDEOFVERTICAL

MT 200 Series

s5SES3ERIESCUTTINGTIPS

Machine Cutting Torch*

sOptional pre-heat attachment is available for USEWITHTHE"(!ADJUSTABLEHEADATTACHMENT 4HE PRE HEAT ATTACHMENT USES REPLACEMENT tip ends

s5SES3ERIESCUTTINGTIPS s4WO HOSETORCH

OPTIONS Gas: !CETYLENE 0ROPANE .ATURAL'ASAND OTHER0RESSURIZED&UEL'ASES Torch Lengths:  Cutting Capacity: 7" (178mm)

'EARRACKSSOLDSEPARATELY

Model 591 3TRIPCUTTERFORUSEWITHMACHINECUTTING torches only. It is designed to accept two tips for use with a common torch. s5SES3ERIESCUTTINGTIPS

MT 300 Series Machine Cutting Torch* s5SES3ERIESCUTTINGTIPS s4HREE HOSETORCH

s!DJUSTABLEFORCUTTINGSTRIPS FROMMM TO MM WIDEAND thickness up to 3" (76mm)

OPTIONS Gas: !CETYLENE 0ROPANE .ATURAL'ASAND OTHER0RESSURIZED&UEL'ASES Torch Lengths:  Cutting Capacity:MM

'EARRACKSSOLDSEPARATELY

12

Gear Racks s&OR5SEWITH-4AND-43ERIESCUTTINGTORCHES s!VAILABLEINMM ANDMM LENGTHS sPITCH

U.S. Customer Care: 800-426-1888 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


CutSkillÂŽ Gas Equipment CutSkill Equipment

CutSkill 250 Applications This medium duty outďŹ t cuts up to 1/2" MM OR  MM WITH OPTIONAL TIPS)TWELDSUPTOMM OR (31.8mm) with optional nozzles.

Components s2#3ERIESREGULATORS s7(&# 6TORCHHANDLEWITHBUILT IN ashback arrestors and check valves s#! 6CUTTINGATTACHMENT s 5- WELDINGNOZZLE s  CUTTINGTIP s2- GRADEHOSEgXMXMM s4OOLBOX s3TRIKERANDSOFT SIDEDGOGGLES

VictorÂŽ CutSkillÂŽ Equipment 6ICTORMANUFACTURES#UT3KILLPRODUCTSFORTHEFREQUENTUSER Victor CutSkill, quality products at an affordable price.

Victor CutSkill OutďŹ ts CutSkillÂŽ Series Welding & Cutting OUTFITS Standard Features UĂŠ/œœÂ?LÂœĂ? UĂŠ/ÂœĂ€VÂ…ĂŠÂ…>˜`Â?iĂŠĂœÂˆĂŒÂ…ĂŠLĂ•ÂˆÂ?ĂŒÂ‡ÂˆÂ˜ĂŠvÂ?>ĂƒÂ…L>VÂŽĂŠ>ÀÀiĂƒĂŒÂœĂ€ĂƒĂŠ>˜`ĂŠVÂ…iVÂŽĂŠĂ›>Â?Ă›iĂƒ UĂŠ˜VÂ?Ă•`iĂƒĂŠ,ĂŠ}Ă€>`iĂŠÂ…ÂœĂƒi]ĂŠĂƒĂŒĂ€ÂˆÂŽiÀÊ>˜`ĂŠĂƒÂœvĂŒÂ‡ĂƒÂˆ`i`ĂŠ}Âœ}}Â?iĂƒ

CutSkill 450

OutďŹ t with Optional 6 MFA Heating Nozzle Also Available

CutSkill 250AF Applications #APABLEOFCUTTINGUPTOMM WITH appropriate cutting tip.

Components s2#3ERIESREGULATORS s7(&# 6TORCHHANDLEWITHBUILT IN ashback arrestors and check valves s#! 6CUTTINGATTACHMENT s(EATINGNOZZLE -&.  s#UTTINGTIP  '0. s4 GRADEHOSEgXMXMM s4OOLBOX s3TRIKERANDSOFT SIDEDGOGGLES

Applications This heavy duty outďŹ t cuts up to 3/4" MM OR  MM WITH OPTIONAL tips. It welds up to 1/8" (3.2mm) or 3" (76.2mm) with optional nozzles.

Components s2#3ERIESREGULATORS s7(&# 6TORCHHANDLEWITHBUILT IN ashback arrestors and check valves s#! 6CUTTINGATTACHMENT s 5-WELDINGNOZZLE s3ERIESCUTTINGTIP s2- GRADEHOSEgXMXMM s4OOLBOX s3TRIKERANDSOFT SIDEDGOGGLES

CutSkill 350 Applications This heavy/medium duty outfit cuts up to MM ORMM WITHOPTIONAL tips. It welds up to 1/8" (3.2mm) or 3" (76.2mm) with optional nozzles.

CutSkill Portable Tote Applications This medium duty portable outfit has a rug ged patented design with a molded plastic CARRYINGCASEANDCUTSUPTOMM or welds up to 3/32" (2.4mm).

Components s32#2REGULATOR s32!2REGULATOR s7(&# 6WELDINGTORCHWITHBUILT IN ashback arrestors and check valves s#! 6CUTTINGATTACHMENT s 5- WELDINGNOZZLE s  CUTTINGTIP s4WIN2- GRADEHOSEgXMXMM

Optional sCUFT#'!ACETYLENECYLINDER sCUFT#'!OXYGENCYLINDER

Components s2#3ERIESREGULATORS s7(&# 6TORCHHANDLEWITHBUILT IN ashback arrestors and check valves s#! 6CUTTINGATTACHMENT s 5-WELDINGNOZZLE s3ERIESCUTTINGTIP s2- GRADEHOSEgXMXMM s4OOLBOX s3TRIKERANDSOFT SIDEDGOGGLES

International Customer Care: 905-827-9777 www.victorequip.com

13


CutSkillÂŽ Gas Equipment

VictorÂŽ CutSkill Regulators / Flowmeters CutSkill Series REGULATOR / FLOWMETER Standard Features

CutSkill Equipment

UĂŠĂŠ7ˆ`iĂŠ6>Ă€ÂˆiĂŒĂžĂŠÂœvĂŠ iÂ?ÂˆĂ›iÀÞÊ,>˜}iĂƒĂŠ>˜`ĂŠ>ĂƒiĂƒÂ°ĂŠĂŠĂŠĂŠĂŠĂŠĂŠĂŠĂŠĂŠĂŠĂŠUĂŠ/ĂœÂœĂŠ9i>ÀÊ7>ÀÀ>Â˜ĂŒĂž

TPR 250 Purging Regulator Single Stage Purging Regulator s Forged brass body & housing cap s3TEMTYPESEATMECHANISM s.EOPRENEDIAPHRAGM s-AXIMUMINLETPRESSURE03)'

RC 450 Series Single Stage Cylinder Type Regulator s Heavy duty s Forged brass body & housing cap sGAUGES s3TEMTYPESEATMECHANISM s3TAINLESSSTEELDIAPHRAGM s-AXIMUMINLETPRESSURE 03)' s OUTLETCONNECTION s Internal relief

Victor CutSkill Handles / Attachments CutSkill Series TORCH HANDLES Standard Features UĂŠÂœĂ€ĂŠVĂ•ĂŒĂŒÂˆÂ˜}ĂŠ>ĂŒĂŒ>V…“iÂ˜ĂŒĂƒ]ĂŠĂœiÂ?`ˆ˜}ĂŠĂŒÂˆÂŤĂƒĂŠ>˜`ĂŠÂ…i>ĂŒÂˆÂ˜}ĂŠ>ĂƒĂƒi“LÂ?ˆiĂƒÂ° UĂŠ Ă•ÂˆÂ?ĂŒÂ‡ÂˆÂ˜ĂŠĂ€iĂ›iĂ€ĂƒiĂŠvÂ?ÂœĂœĂŠVÂ…iVÂŽĂŠĂ›>Â?Ă›iĂƒĂŠ>˜`ĂŠvÂ?>ĂƒÂ…L>VÂŽĂŠ>ÀÀiĂƒĂŒÂœĂ€ĂƒĂŠvÂœĂ€ĂŠ>``i`ĂŠÂœÂŤiĂ€>ĂŒÂœĂ€ĂŠĂƒ>viĂŒĂžÂ°

RC 350 Series

CutSkill Torch Handles

Single Stage Cylinder Type Regulator

Features

s-EDIUMTOHEAVYDUTY s Forged brass body & housing cap sGAUGES s Delrin bushing s.EOPRENEDIAPHRAGM s-AXIMUMINLETPRESSURE03)'

Heavy Duty WH 370FC-V

s"UILT INREVERSEFLOW check valves and flashback arrestors s Tube within a tube design s Three piece “Y� rear assembly with threaded connection s HOSECONNECTIONS s3TAINLESSSTEELBALLVALVES

Medium Duty WH 270FC-V

RC 250 Series Single Stage Cylinder Type Regulator s-EDIUMDUTY s Forged brass body & housing cap s 2" gauges s Delrin bushing s.EOPRENEDIAPHRAGM s-AXIMUMINLETPRESSURE03)'

CutSkill Series CUTTING ATTACHMENTS Standard Features For use with any fuel gas ÂœĂ€ĂŠĂ•ĂƒiĂŠĂœÂˆĂŒÂ…ĂŠ>ViĂŒĂžÂ?i˜i]ĂŠÂŤĂ€ÂœÂŤ>˜i]ĂŠLĂ•ĂŒ>˜i]ĂŠÂˆÂľĂ•Âˆ`ĂŠÂˆĂ€ĂŠvĂ•iÂ?ĂŠ}>Ăƒ]ĂŠÂ˜>ĂŒĂ•Ă€>Â?ĂŠ}>ĂƒĂŠÂ­Ă“ĂŠ*-ĂŠEĂŠ>LÂœĂ›iÂŽĂŠ>˜`ĂŠÂŤĂ€ÂœÂŤĂžÂ?i˜i°

CutSkill Cutting Attachments Features

1400 Series HRF Flowmeter s3INGLESTAGEPISTONDESIGN s!RGON !RGON#/2-IX#/2 models s-AXIMUMINLETPRESSURE03)' s03)'OR03)'PRESETPRESSURE s5PTO#&(FOR!RGONANDUP TO#&(FOR#/2 delivery s!VAILABLEIN#'! inlet connections s/PTIONAL-)'KITAVAILABLEWITH g(OSEM

14

s Universal mixer s%ASY ONCUTTINGOXYGEN s3TAINLESSSTEELCUTTING oxygen lever and ball valve s(EADANGLEÂŞ s#UTTING2ANGE #! 6 #! 6

Heavy Duty CA 370-V

Medium Duty CA 270-V

U.S. Customer Care: 800-426-1888 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


FirePowerÂŽ Gas Equipment FirePower Equipment

Victor FirePower Regulators RF 350 Series Single Stage Cylinder Type Regulator s(EAVY-EDIUMDUTY s Forged brass body s3TEMTYPESEATMECHANISM s.EOPRENEDIAPHRAGM s Internal relief s-AXIMUMDELIVERYPRESSURE03)'

RF 250 Series Single Stage Cylinder Type Regulator

VictorÂŽ FirePower Equipment 6ICTORMANUFACTURES&IRE0OWERPRODUCTSFORTHELIGHT DUTYCONTRACTOROR THEDO IT YOURSELFHANDYMAN

s-EDIUMDUTY s Forged brass body s3TEMTYPESEATMECHANISM s.EOPRENEDIAPHRAGM s Internal relief s-AXIMUMDELIVERYPRESSURE03)'

Victor FirePower Handles / Attachments

Victor FirePower OutďŹ ts FirePower 350

FirePower Torch Handles

Applications

Features

This heavy/medium duty outďŹ t cuts up TO  MM OR  MM WITH optional tips. It welds up to 1/8" (3.2mm) or 3" (76.2mm) with optional nozzles.

Components s2&HEAVYMEDIUMDUTYREGULATORS s7(&# &3TORCHHANDLEWITHBUILT IN ashback arrestors and check valves s#! &3CUTTINGATTACHMENT s 5- WELDINGNOZZLE s  CUTTINGTIP s2 GRADEHOSEgXMXMM s3TRIKERANDGOGGLES

s"UILT INREVERSEFLOW check valves and flashback arrestors s Victor tube within a tube design s Three piece “Y� rear assembly with threaded connection s HOSECONNECTIONS s3TAINLESSSTEELBALLVALVES

Heavy Duty WH 370FC-FS

Medium Duty WH 270FC-FS

FirePower 250

FirePower Cutting Attachments

Applications

Features

This medium duty outfit cuts up to 1/2" (12.7mm) or 3" (76.2mm) with optional tips. )TWELDSUPTOMM ORMM with optional nozzles.

Components s 2&MEDIUMDUTYREGULATORS s7(&# &3TORCHHANDLEWITHBUILT IN ashback arrestors and check valves s#! &3CUTTINGATTACHMENT s 5- WELDINGNOZZLE s  CUTTINGTIP s2 GRADEHOSEgXMXMM s3TRIKERANDGOGGLES

International Customer Care: 940-381-1212 / www.victorequip.com

s Universal mixer s Triangular tube design s3TAINLESSSTEELCUTTING oxygen lever and ball valve s(EADANGLEÂŞ s#UTTING2ANGE #! &3 #! &3

Heavy Duty CA 350-FS

Medium Duty CA 250-FS

FAX 940-483-8178

15


Gas Equipment Accessories

Acetylene One Piece

Propylene General Purpose

One Piece

General Purpose

Two Piece

Hand & machine torch cutting.

One Piece

General Purpose

Series 1 Type 101L

Series 3 Type GPP

Series 1 Type 207

Extra length 10" tip.

Hand cutting. (Series 3 for small cutting head)

Rivet washing.

One Piece

General Purpose

Two Piece

Series 1 Type 10130°

Series 1 Type HPP

Hand cutting & machine torch cutting. 30° angle with torch perpendicular.

Heavy pre-heat for scrap, bevel and other heavy pre-heat requirements.

One Piece

General Purpose

Two Piece

Series 3 Type 101

Series 1 Type BTMP

Hand cutting. (Series 3 for small cutting head)

High performance bevel tip for use with mild steel, HSLA, T-1, HY-80

One Piece

One Piece Bent

Boiler tube removal. Short tip to insert inside tube or confined area.

One Piece Bent

Special Application

One Piece Bent Deseaming, gouging, weld preparation, removing defective welds, rivet washing.

Special Application

One Piece Bent

Series 1 Type 118

Cutting close to bulkheads, rivet washing

Special Application

One Piece

One Piece Special Application

General Purpose

Special Application

Coarse spline for extra heavy pre-heat and wide kerf for demolition, ripping and rail car repair.

General Purpose

Two Piece

Series 1 Type MTHP

General Purpose

Series 1 Type GPN

High speed machine cutting up to 8" (203.7mm).

Hand & machine torch cutting.

Deseaming, gouging, weld preparation, removing defective welds, rivet washing.

One Piece Bent

Special Application

Series 1 Type 244

One Piece

Hand & machine torch cutting.

Special Application

Series 1 Type 218

Series 1 Type MCN

Cutting close to bulkheads, hand cutting of rivet heads. 45° angle with torch perpendicular.

Special Application

High performance gouging tip.

Gouging tip.

Series 1 Type 303MP

Special Application

Series 1 Type GTB

Series 1 Type GTB

Series 1 Type 112

One Piece Bent

Two Piece Bent Special Application

Special Application

Series 1 Type 108

General Purpose

Series 1 Type 200

Hand & machine torch cutting.

Hand & machine torch cutting.

Cutting Tips

Propane & Natural Gas General Purpose

Series 1 Type GPP

Series 1 Type 101

One Piece

Two Piece

Two Piece

General Purpose

Series 3 Type GPN Hand torch cutting. (Series 3 for small cutting head)

Special Application

Series 3 Type 118

One Piece

Deseaming, gouging, weld preparation, removing defective welds, rivet washing. (Series 3 for small cutting head)

Special Application

Series 1 Type HDNL Extra length. Mill and foundry, scrap cutting under severe conditions.

Two Piece

Look for Victor® Color Coded Packages

Special Application

Series 1 Type MTHN High speed machine cutting up to 10" (254mm).

Two Piece

Special Application

Series 1 Type HPN

Acetylene Propylene Natural Gas Propane

Heavy pre-heat for scrap, bevel and other heavy pre-heat requirements.

(Red) (Orange) (Blue) (Blue)

Two Piece

Special Application

Series 1 Type BTN High performance bevel tip for use with mild steel, HSLA, T-1, HY-80.

Two Piece

Special Application

Series 1 Type CSN Coarse spline for scrap cutting.

Genuine Victor Professional Tips are available in a wide variety of types and sizes. Genuine Victor CutSkill® Tips are also available in a wide variety of competitive styles, types and sizes.

16

U.S. Customer Care: 800-426-1888 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


Gas Equipment Accessories

Propylene Cutting Oxygen

Acetylene4

Kerf Width (in)

Metal Thickness

Tip Size

Pressure1 (PSIG)

Flow2 (SCFH)

Preheat Oxygen3 (PSIG)

Pressure (PSIG)

Flow (SCFH)

Speed (ipm)

1/8"

000

20-25

20-25

3-5

3-5

6-11

28-32

0.04

1/4"

00

20-25

30-35

3-5

3-5

6-11

27-30

0.05

3/8"

0

25-30

55-60

3-5

3-5

6-11

24-28

0.06

1/2"

0

30-35

60-65

3-6

3-5

9-16

20-24

0.06

3/4"

1

30-35

80-85

4-7

3-5

8-13

17-21

0.07

1"

2

35-40

140-160

4-8

3-6

10-18

15-19

0.09

2"

3

40-45

210-240

5-10

4-8

14-24

12-15

0.11

3"

4

40-50

280-320

5-10

5-11

18-28

9-12

0.12

4"

5

45-55

390-450

6-12

6-13

22-30

8-11

0.15

6"

6

45-55

500-600

6-15

8-14

25-35

6-8

0.15

10"

7

45-55

700-850

6-20

10-15

25-35

4-5

0.34

12"

8

45-55

900-1050

7-25

10-15

25-35

3-5

0.41

Acetylene Pressure (PSIG)

Oxygen Pressure (PSIG)

Propane & Natural Gas

Tip Cutting Charts

Acetylene

Acetylene Consumption (SCFH)

Metal Thickness

Tip Size

Drill Size

Min.

Max.

Min.

Max.

Min.

Max.

Up to 1/32"

000

75 (0.022")

3

5

3

5

1

2

3/64"

00

70 (0.028")

3

5

3

5

1.5

3

5/64"

0

65 (0.035")

3

5

3

5

2

4

3/32"

1

60 (0.040")

3

5

3

5

3

6

1/8"

2

56 (0.046")

3

5

3

5

5

10

3/16"

3

53 (0.060")

4

7

3

6

8

18

1/4"

4

49 (0.073")

5

10

4

7

10

25

1/2"

5

43 (0.089")

6

12

5

8

15

35

3/4"

6

36 (0.106")

7

14

6

9

25

45

1.25"

7

30 (0.128")

8

16

8

10

30

60

2"

8

29 (0.136")

10

19

9

12

35

75

3"

10

27 (0.144")

12

24

12

15

50

100

4"

12

25 (0.149")

18

28

12

15

80

160

* Oxygen consumption is 1.1 times that of Acetylene under neutral ame conditions. Gas consumption data is merely for estimating purposes. It will vary greatly on the material being welded and the particular skill of the operator. Pressures are approximate for hose length up to 625 ft. Increase pressures for longer hose lengths about 3 PSI per 25 ft.

Acetylene

Oxygen

Tip Size

Pressure (PSIG)

Flow (SCFH)

Pressure (PSIG)

Flow (SCFH)

4 6 8 10 12* 15*

6-10 8-12 10-15 12-15 12-15 12-15

6-20 14-40 30-80 40-100 60-150 90-220

8-12 10-15 20-30 30-40 50-60 50-60

7-22 15-44 33-88 44-110 66-165 99-244

BTU per Hour

See Below

* Use Model HD 310C torch and 3/8" hose.

International Customer Care: 940-381-1212 / www.victorequip.com

FAX 940-483-8178

17


Gas Equipment Accessories

Safety Accessories FlameBuster Regulator Flashback Arrestors

Check Valves

s"UILT INREVERSEFLOWCHECKVALVES s Designed to prevent flashback from hose to regulator s For use with MOST/XY &UELWELDINGCUTTINGREGULATORS s'REATERFLOWTHANCOMPETITIVEMODELS

Safety Accessories

s Help prevent gases traveling back into the fuel supply or oxygen system, creating a mixed gas condition s7ILLNOTSTOPAFLASHBACKALONE

Torch Models CTO & CTF 4ORCHn#HECK6ALVES0AIR0ACK (Oxygen and Fuel) CTO4ORCHn#HECK6ALVE(Oxygen) CTF 4ORCHn#HECK6ALVE(Fuel)

FB-OR 2EGULATOR&LASHBACK!RRESTOR(Oxygen)

Regulator Models CRO & CRF2EGULATORn#HECK6ALVES0AIR0ACK (Oxygen and Fuel) CRO2EGULATORn#HECK6ALVE (Oxygen) CRF 2EGULATORn#HECK6ALVE (Fuel)

FlameBusterâ„¢ Torch Flashback Arrestors s"UILT INREVERSEFLOWCHECKVALVES s Designed to prevent flashback from torch to hose s For use with MOST/XY &UELWELDINGCUTTINGTORCHES s'REATERFLOWTHANCOMPETITIVEMODELS

FB-FR2EGULATOR&LASHBACK!RRESTOR(Fuel) Regulator Models FBR-10AIR0ACKFOR2EGULATOR(Oxy/Fuel) FB-OR (Oxygen) 2EGULATOR&LASHBACK!RRESTOR FB-FR (Fuel) 2EGULATOR&LASHBACK!RRESTOR

Torch Models FB-10AIR0ACKFOR4ORCH(Oxygen & Fuel) Flashback Arrestors FB-O (Oxygen) Torch Flashback Arrestor FB-F (Fuel) Torch Flashback Arrestor

Vanguard ™ Replacement Cartridge For Flashback Arrestors s2EPLACEMENT&LASHBACK!RRESTOR#ARTRIDGE (for both gases) s#ARTRIDGESFORUSEWITH6ICTOR®&#AND&# 4ORCH(ANDLESAND6ICTOR3TRAIGHT#UTTING4ORCHES

Replacement Cartridge Models 0657-00360AIR0ACKFORUSEWITH&# &# AND#34&#4ORCH(ANDLES 0656-00460AIR0ACKFORUSEWITH34&# 34&# 34&# H 315FCn2EFERTO-ASTER#ATALOG See the Victor Industrial Catalog (65-2007) for complete information.

FB-1 0AIR0ACKFOR4ORCH Flashback Arrestors (Oxygen & Fuel)

FB-O Torch Flashback Arrestor (Oxygen)

FB-F Torch Flashback Arrestor (Fuel)

Regulator Gauge Guards An added safety feature designed to help protect Victors’s most popular industrial regulators. Also helps reduce costly repairs of damaged gauges. 0ART.O

0ART.O

250 Series

450 Series

 3TEEL'AUGE'UARD'REEN /XYGEN  3TEEL'AUGE'UARD2ED !CETYLENE

 3TEEL'AUGE'UARD'REEN /XYGEN  3TEEL'AUGE'UARD2ED !CETYLENE

350 Series  3TEEL'AUGE'UARD'REEN /XYGEN  3TEEL'AUGE'UARD2ED !CETYLENE

18

U.S. Customer Care: 800-426-1888 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


Gas Equipment Accessories Safety Accessories

Safety Accessories Kwik-Connect™ Torch/Hose Connectors s"UILT INREVERSEFLOWCHECKVALVES s Quickly and safely connect torch to hose s Designed to prevent mismatching of Oxygen and fuel s For use with MOST/XY &UELWELDING & cutting torches

FlameBuster Plus Flashback Arrestor with Kwik-Connect for Torches & Regulators s"UILT INREVERSEFLOWCHECKVALVES s Designed to prevent flashbacks s For use with MOST/XY &UELWELDING & cutting torches & regulators s'REATERFLOWTHANCOMPETITIVEMODELS

Torch/Hose Models

Torch Models

KCO (Oxygen) +WIK #ONNECT KCF (Fuel) +WIK #ONNECT KC-10AIR0ACK+WIK #ONNECT (Oxygen and Fuel)

FBP-O Torch Flashback Arrestor W+WIK #ONNECT(Oxygen) FBP-F Torch Flashback Arrestor W+WIK #ONNECT(Fuel) FBP-10AIR0ACK4ORCH&LASHBACK!RRESTORS W+WIK #ONNECT(Oxygen and Fuel)

KCO Kwik-Connect (Oxygen) FBP-F Torch Model (Fuel) KC-1 Pair Pack Kwik-Connect (Oxygen and Fuel)

KCF Kwik-Connect (Fuel)

FBP-O Torch Model (Oxygen)

FBP-1 Pair Pak Torch Flashback Arrestor (Oxygen & Fuel)

Regulator Models FBP-OR Not Shown2EGULATOR&LASHBACK!RRESTORW+WIK #ONNECT(Oxygen) FBP-FR Not Shown2EGULATOR&LASHBACK!RRESTORW+WIK #ONNECT(Fuel) FBPR-10AIR0ACKnNot Shown2EGULATOR&LASHBACK!RRESTORSW+WIK #ONNECT (Oxygen and Fuel)

Victor CutSkill Flashback Arrestors s"UILT INREVERSEFLOWCHECKVALVES s Designed to prevent mismatching of Oxygen and fuel s 100% factory tested to insure maximum reliability

Pair Paks FBT-2 (Oxy/Fuel) 4ORCH-OUNT FBR-2 (Oxy/Fuel) 2EGULATOR-OUNT

Don't Leave Safety to Chance!

Insist on using torches with built-in Flashback Arrestors and Check Valves.

VictorÂŽ Torch Handle with Built-in Flashback Arrestors and Check Valves

International Customer Care: 940-381-1212 / www.victorequip.com

Victor Straight Torch with Built-in Flashback Arrestors and Check Valves

FAX 940-483-8178

19


Gas Equipment Reference Guides

Victor Equipment Reference Guide OUTFITS

REGULATORS OXYGEN FUEL

GAS

HANDLES

CUTTING ATTACHMENTS

CUTTING TIPS

EXTRA / HEAVY DUTY

Reference Guides

Victor Professional Journeyman ® Series Journeyman II Series

ESS4-125-540

Journeyman Select Series

CSR 450 D-540

Contender ® Contender ® AF

ESS4-15-300 ESS4-15-510

315FC H 315FC HD 310C*

CSR 460A-510 CSR 460A-300 CSR 461B-510

ESS3-125-540

ESS3-15-300 ESS3-15-510 ESS3-15-510LP

RC 450-125-540

RC 450-15-510 RC 450-15-300

*HD310C – not included in any outfit, built-in flashback arrestors not included.

1-101

GPN GPP

3-101

3-GPN 3-GPP

3-101

3-GPN 3-GPP

3-101

3-GPN 3-GPP

CA 2460 90° CA 2461 75° CA 2462 180° CA 2460 90° CA 2461 75° CA 2462 180°

Victor CutSkill ® CS450 Series CS350 Series

RC 350-125-540

RC 350-15-510 RC 350-15-300

RF 350-125-540

RF350-15-510 RF350-15-300

WH 370FC-V

CA 370-V 90°

WH 370FC-FS

CA 350-FS 90°

Victor FirePower ® FP350 Series

MEDIUM DUTY Victor Professional Performer ® Series

ESS3-125-540

Performer ® Series Portable Tote Series Portable Torch™ Series

ESS3-125-540 SR 150CR-540 SR 150CR-540

ESS3-15-510 ESS3-15-300 ESS3-15-510 ESS3-15-300 SR 160AR-(MC)

100FC

CA 1350

SR 160AR-(MC)

Victor CutSkill ® CS250 Series CS250 Series AF Portable Tote Series

RC 250-125-540

RC 250-15-510 RC 250-15-300 RC 250-40-510LP

SR 150CR-540

SR 160AR-(MC)

RF 250-125-540

RF 250-15-510 RF 250-15-300

WH 270FC-V

CA 270-V

WH 270FC-FS

CA 250-FS

Victor FirePower ® FP250 Series

LIGHT DUTY Victor Professional

Current Victor Outfits do not Contain a J-28 or J-40 Torch Handle

Color Code:

20

Acetylene

J-28 J-40

Natural Gas / Propane

CA 1260 90°

Propylene

U.S. Customer Care: 800-426-1888 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


Gas Equipment Reference Guides

WELDING / BRAZING NOZZLES, MIXERS, TIPS

HEATING NOZZLES

Delivery / Flow Ranges Pressure Delivery PSIG

15

40

80

125

15

40

80

125

200

SR 700 TIPS W ET RTE TE

MIXERS / TIP TUBES FE DFE UN UM Mixer Series

Reference Guides

Industrial Regulator Matrix

EDGE ESS4 SR 450

TIPS RTEN TEN MFA MFTA TEMFA

MIXERS / TIP TUBES FE DFE UN

(USE APPROPRIATE MIXER / TIP TUBE)

MFN MFTN TEMFN (USE APPROPRIATE MIXER / TIP TUBE)

TYPE 55 TYPE 55

EDGE ESS3 SR 350 SR 250 SR 5/6 VTS 700 VTS 450 VTS 250 VGS 450/350 Pipeline PSIG

TIPS W-1 ET ET-1 TE

MIXERS / TIP TUBES UN-1 FE-1 UM-1 Mixer Series

200

L 700 TIPS TEN

MIXERS / TIP TUBES UN-1 FE-1

L 350 MFA-1 TEMFA

MFN-1 TEMFN

(USE APPROPRIATE MIXER / TIP TUBE)

(USE APPROPRIATE MIXER / TIP TUBE)

L 250 S 700 S 350 S 250 Flow Control SCFH

15

35

40

50

80

100

150 200

ESS3-FG AF 250 TIPS W-J, ET, TE MIXERS / TIP TUBES UN-J, DFE-1 FE-J, UM-J

TIPS TEN MIXERS / TIP TUBES UN-J, UNN-J DFE-1, FE-J

TEMFA

TEMFN

(USE APPROPRIATE MIXER / TIP TUBE)

(USE APPROPRIATE MIXER / TIP TUBE)

HRF 2400 DFM 150 SR 310, 312 HSR HVTS FM U Denotes Delivery Availability

International Customer Care: 940-381-1212 / www.victorequip.com

FAX 940-483-8178

21


Specialty Products Equipment

3UPPORTED BY MANUFACTURING AND ENGINEERING EXPERTISE OF 6ICTOR %QUIPMENT#OMPANYANDARECENTLYCOMPLETED MULTI MILLIONDOLLAR STATE OF THE ARTASSEMBLYANDTESTINGFACILITY 6ICTOR3PECIALITY0RODUCTSPROVIDES unsurpassed product quality and performance in a timely manner.

With Victor Specialty Products, you will experience: s %XPANDEDGLOBALPRODUCTOFFERING s Improved product performance featuring â€œďŹ‚ow straightening technologyâ€? s 'UARANTEEDPRODUCTQUALITYANDRELIABILITY

Regulators

s 3ERVICEEXCELLENCE s 'LOBAL3ALES3UPPORT 6ICTOR3PECIALTY0RODUCTSISCOMMITTEDTOEXCEEDINGINDUSTRYSTANDARDS WITHONGOINGCERTIlCATIONSANDPROGRAMSINCLUDING s )3/2EGISTERED

ÂŽ

Victor Specialty Products 0ROVENSERVICETOSPECIALTYGASANDMANIFOLDMARKETSFOROVERYEARS

s (ELIUM,EAK2ATE#ERTIlCATION s #'!COMPLIANTWITHALL#'!% TESTING INCLUDING%  h/XYGEN)GNITION4ESTv

SG500 Series

GP270 Series

Single Stage Stainless Steel Regulator

General Purpose

4HE 3' 3ERIES IS THE TOP RANGE OF HIGH PURITY REGULATORS 7ITH THEIR ,STAINLESSSTEELBODIESANDOTHER WETTEDCOMPONENTS 0#4&%SEATSAND metal to metal diaphragm seals, they are suitable for all purity levels of inert gases as well as corrosive and toxic gases. Available in single stage, dual stage and line models.

4HE '0  3ERIES REGULATORS ARE general purpose chrome plated forged brass body regulators for INERT AND OTHER NON CORROSIVE GASES Their neoprene diaphragms provide excellent responsiveness in many general laboratory applications including pressure testing, purging, blanketing, etc.

HP500 Series

Laser Assist Regulator

Single Stage Stainless Steel Regulator 4HE (0 3ERIES ARE ULTRA HIGH purity brass barstock body regulators suitable for all purity levels of inert and OTHERNON CORROSIVEGASES4HE, stainless steel diaphragms and metal to metal diaphragm seals protect the gases being controlled from external contamination and leakage.

4HE $ $OME ,OAD REGULATOR IS designed for high ow and high pressure APPLICATIONSSUCHAS,ASER!SSIST'ASAND other high ow applications. The beneďŹ t of self loading dome load regulator is that the ow characteristics remain constant through the full range of ow requirements with minimal droop. The SELF LOADING DESIGN OF THE $  PROVIDES OUTLETPRESSURESUPTOPSIGANDmOW capacity in excess of 10,000 scfh.

HP270 Series

PDS600 Series

4HE (0  3ERIES REGULATORS ARE medium purity chrome plated forged brass body regulators for inert and OTHER NON CORROSIVE GASES UP TO A GRADE   PURE  4HE large stainless steel diaphragm and large seat provide high ow with responsiveness and excellent regulating characteristics.

4HE 0$3 3ERIES MANIFOLD SYSTEM is a simple high purity switchover designed to provide a continuous supply of high purity gas to the laboratory or process plant. Available in brass or 316 stainless steel, the 0$3 IS THE SOLUTION TO SUPPLYING pure gases to critical applications. Designed for use with one cylinder per SIDEORWITHAMULTI CYLINDERMANIFOLD

See our full line catalogs for high purity instrumentation (Form No. 56-0874) and gas manifolds (Form No. 81-2104) or visit us on the web at www.victorhpi.com for more information. 22

U.S. Customer Care: 800-569-0547 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


Specialty Products Equipment

V

4HE6-3ERIESMANIFOLDSARETRULYTHE most versatile available for industrial, medical, ammable and oxidizing gases. The high ow capacity and EASE OF OPERATION MAKE THE 6- manifolds the choice for a multitude of APPLICATIONS3TANDARDWITHLOCALVISUAL alarms and optional remote audio/ visual alarms that provide notiďŹ cation when the reserve side is in operation and cylinders need to be changed.

Regulators / Manifolds

500 Series3 High Purity Regulator

VM Series Manifold

VHP2000 Series 4HE 6(0 IS AN ENCLOSURE STYLE pressure differential manifold ideal for indoor or outdoor installation. The standard system comes with a local visual alarm and optional remote alarms that provide visual and audible alarms anywhere an alarm signal is desired. Brass or stainless steel CONSTRUCTION MAKES THE 6(0 AN extremely versatile system suitable for a variety of high purity gases.

International Customer Care: 940-381-1212 / www.victorhpi.com

FAX 940-483-8178

23


Medical Gas Equipment

Medical Equipment

VMG Series Regulators 4HE 6-' 3ERIES OF mOW GAUGE regulators provides superior PERFORMANCE0EDIATRICmOWGAUGES ARE SCRIBED IN BOTH ,0-  ##- !LL 6-' MODELS ARE BUILT WITH HIGH IMPACT RESISTANT .ORYLŽ bonnets AND CONTOURED !"3 ADJUSTING knobs. High visibility gauges with enlarged numbers provide dependable and precise ow rate settings throughout the entire ow range.

Victor Medical Flowmeters ÂŽ

Victor Medical ,EADER IN MEDICAL OXYGEN MARKET DELIVERING QUALITY AND OUTSTANDING service at a fair price.

RESPI-LITE I Series 4HE2ESPI LITE)3ERIESOFREGULATORS are lightweight compact medical oxygen regulators featuring an anodized aluminum exterior with brass internal components. The CLICKSTYLEADJUSTMENT ,0- OR ,0- ANDINTEGRAL#'! yoke make these regulators ideally suited for respiratory patients at home or in a healthcare facility.

SLIMLITE IIŽ Series 4HE 3,)-,)4% )) 3ERIES OF REGULATORS are sleek and light. The combination of anodized aluminum and full brass core construction with unibody design, incorporates a ow control REGULATOR WITH A BUILT IN YOKE FOR durability and convenience.

O2 n Demand V Conserver The O 2n Demand V is a demand style dual cannula conserver for the active patient to make mobility a little EASIER AND MORE CONVENIENT .O batteries are required for operation. Thus, the unit can operate in various temperatures and conditions without FEAR OF FAILURE 7ITH ITS PNEUMATIC operating system, the patient receives oxygen during the entire inhalation CYCLEOFTHEBREATHINGCYCLENOTDURINGEXHALATION7ITHmOWSETTINGS conserve & 11 continuous) the O 2n Demand V is suitable for a broad range of PATIENTS4HELIGHTERWEIGHT/: ANDSMALLERSIZEvLONG OFTHE O 2N $EMAND 6 WILL CAUSE LESS FATIGUE AND THE  CONSERVING RATIO ALLOWS longer cylinder life than other comparable conserving devices.

24

6ICTOR-EDICALmOWMETERSAREMADE of highly durable medical grade ,EXANŠTOMINIMIZEBREAKAGE s , ARGENUMERALSFOR ADJUSTMENTEASE s , EXANŠINNERANDOUTER tubes avoid breakage s # ALIBRATEDAT03)'INLET pressure

O2 n Demand IV Conserver The O2n Demand IV is a pulse style conserving device designed to deliver a controlled pulse dose of oxygen at the beginning of inspiration, regardless of breath rate. The single lumen design allows the use of standard single lumen cannulas. Its single lumen pulse design makes it the quietest and most accurate conserver on the market, making it less irritating to the patient. 7ITHACONSERVINGRATIOOFUPTOTHE/ 2n Demand IV maximizes ambulatory time while maintaining peak levels of oxygenation. The unit also offers the highest number of conserving and continuous ow settings available, making it suitable for a broader range of patients.

See our full line catalog or visit us on the web at www.victormed.com for more information. Victor Medical Medical Gas Equipment Catalog (Form No. 68-9902)

U.S. Customer Care: 800-382-8187 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


HVAC/R and Plumbing Air-Fuel Brazing & Soldering Equipment

®

KEY APPLICATIONS HVAC

HVAC/R and Plumbing Equipment Catalog Extreme Air Acetylene Equipment Swirl Combustion Air Acetylene Equipment Extreme MAP-Pro™ & Propane Equipment Proline MAP-Pro™ & Propane Equipment Oxy Acetylene Outfits and Components Plasma Cutters Accessories Cylinders

REFRIGERATION

Air Fuel Equipment

TurboTorch

See our full line catalog or visit us on the web at www.turbotorch.com for more information.

www.turbotorch.com

MAINTENANCE AND REPAIR

TurboTorch® HVAC/R and Plumbing Equipment Catalog

PLUMBING

(Form No. 56-1252)

Self Lighting Torches & Tips

TX-500 (0386-1299)

Swirl Combustion Tip Concentrates Heat – Reduces Brazing Time by

STK-99 (0386-0851)

ProPak with TX-504 Self-Lighting Torch, and TX-504 and TX-503 Tips.

40%

STK-99 Self Lighting Hand Torch

TX-503 (0386-1297)

PL-3A (0386-0874)

PL-8A (0386-0819)

EXTREME Self Lighting Hand Torch

Air/Acetylene Self Lighting Tip

Air/Acetylene Self Lighting Tip

TX-504 (0386-1293)

PL-5A (0386-0818)

T-503 EXTREME (0386-1298)

EXTREME Self Lighting Hand Torch

Air/Acetylene Self Lighting Tip

Replacement Tip for TX-503 Self Lighting Hand Torch

Self Lighting Torches MODEL GAS BASIC BRAZING HANDYMAN HVAC MAINTENANCE & REPAIR PLUMBING REFRIGERATION BRAZE/WELD

TX-500 s s s s s s 3 ⁄4" - 4"

Self Lighting Tips

TX-503 TX-504 STK-99 Disposable Propane Tanks s s s s s s s s

International Customer Care: 940-381-1212 / www.turbotorch.com

s s 1 ⁄8" - 3"

s s 3 ⁄4" - 4"

s s 1 ⁄4" - 3"

PL-3A

PL-5A

s

s

s

s

PL-8A PL-12A Air Acetylene s s

s ⁄4" - 1"

s ⁄4" - 11⁄2

3

T-503

s s

s s

s s

s s

s s

1

T-504

s 1" - 2"

2" - 4"

3

⁄4" - 4"

1

⁄8" - 3"

FAX 940-483-8178

25


HVAC/R and Plumbing Air-Fuel Brazing & Soldering Equipment

See our full line catalog (Form No. 56-1252) or visit us on the web at www.turbotorch.com for more information.

Air Fuel Equipment

Swirl Air Acetylene Kits & Tips

X-3B (0386-0335)

PL-8ADLX-MC KIT (0386-0834)

A-3 (0386-0101)

Flexible kit brazes light medium gauge steel.

X-5B (0386-0338)

PL-5ADLX-MC KIT (0386-0832)

Flexible lighter duty kit.

PL-12ADLX-B KIT (0386-0836)

Manual Lighting Torches & Tips

STK-1 (0386-0408)

STK-11 (0386-1283)

Manual Lighting Hand Torch

Manual Lighting Hand Torch

STK-9 (0386-0403)

26

Size 3 Hand Torch Tip

ST-11 EXTREME (0386-1282)

ST-1 EXTREME (0386-0170)

Manual Lighting Hand Torch

MODEL GAS BASIC BRAZING HANDYMAN HVAC MAINTENANCE & REPAIR PLUMBING REFRIGERATION BRAZE/WELD

ST-3 EXTREME (0386-0171)

Double Barrel Hand Torch Tip

Size 1 Hand Torch Tip

Swirl Air Acetylene Kits & Tips X-3B X-5B PL-5ADLX PL-8ADLX PL-12ADLX Air Acetylene s s s s s s s s s s s s s

s

15⁄8" - 3" 2" - 31⁄2

s 3

⁄ 4" - 1 1⁄ 2

s s 1" - 2"

s 2" - 31⁄2

STK-1 s s s s s 1 1⁄ 8" - 3⁄ 8

Manual Lighting Torches & Tips STK-9 STK-11 ST-1 ST-3 Manual Lighting Torches & Tips s s s s s s s s s s s 3 ⁄ 8" - 2 1⁄ 2

s s s 1 ⁄ 8" - 7⁄ 8

s s s 1 ⁄ 8" - 7⁄ 8

s s 3 ⁄16" - 3⁄4

U.S. Customer Care: 800-238-0282 / Canada Customer Care: 905-827-4515 /

ST-11 s s

s s 3 ⁄16" - 3⁄4

FAX 800-535-0557 FAX 800-588-1714


HVAC/R and Plumbing Air-Fuel Brazing & Soldering Equipment

Built-in Flashback Arrestors (certain models) Patent #5407348

Check Valves Included for Safety

Air Fuel Equipment

Ergonomic Carry Handle

Built-in Storage Compartments

Patented Balance Design

Tanks and Torch Storage

Removable Storage Compartment

Small Footprint

Cuts up to 3⁄4" (3" with optional tips) in kits equipped with cutting

Welds up to 1⁄4" (11⁄2" with optional tips) in kits equipped with welding

TurboTorch by VICTOR MODEL DESCRIPTION

TTV-100-C

TTV-100-CP

TTV-100-CPT

TTV-J-A

TTV-J-AP

TTV-J-APT

TTV-J-AM

TTV-J-ST

TTV-J-STP

TTV-J-STPT

TTV-J-AC

TTV-J-ACP

TTV-J-ACPT

Medium Duty Medium Duty Medium Duty Light Duty Light Duty Light Duty Light Duty Light Duty Light Duty Light Duty Light Duty Light Duty Light Duty Oxy-Fuel Oxy-Fuel Oxy-Fuel Oxy-Fuel Oxy-Fuel Oxy-Fuel Oxy-Fuel Oxy-Fuel Oxy-Fuel Oxy-Fuel Oxy-Fuel Oxy-Fuel Oxy-Fuel Cutting, Brazing, Cutting, Brazing, Cutting, Brazing, and Air-Fuel and Air-Fuel and Air-Fuel and Air-Fuel and Air-Fuel and Air-Fuel and Air-Fuel and Air-Fuel and Air-Fuel and Air-Fuel Heating Heating Heating Brazing, Heating Brazing, Heating Brazing, Heating Brazing, Heating Brazing, Heating Brazing, Heating Brazing, Heating Cutting, Brazing, Cutting, Brazing, Cutting, Brazing, Equipment Only Plastic Tote Plastic Tote With Equipment Only Plastic Tote Plastic Tote Metal Tote Specialty Specialty Specialty Heating Heating Heating Without Tanks Tanks Without Tanks With Tanks Without Tanks Equipment Only Plastic Tote Plastic Tote With Equipment Only Plastic Tote Plastic Tote Without Tanks Tanks Without Tanks With Tanks

NEW PART NO.

0386-1337

0386-1335

0386-1336

0386-1340

0386-1338

0386-1339

0386-1341

0386-1344

0386-1342

0386-1343

0386-1347

0386-1345

0386-1346

OLD MODEL/PN#

D.N.E.

110-01FP 0386-0038

110-01FPT 0386-0479

D.N.E.

CWK-5 0386-0055

CWK-5T 0386-0058

D.N.E.

D.N.E.

D.N.E.

D.N.E.

D.N.E.

D.N.E.

D.N.E.

"!3)#"2!:).'

s

s

s

s

s

s

s

s

s

s

s

s

s

(!.$9-!.

s

s

s

s

s

s

(6!#

s

s

s

s

s

s

s

-!).4%.!.#%2%0!)2

s

s

s

s

s

s

0,5-").'

s

s

s

s

s

s

2%&2)'%2!4)/.

s

s

s

s

s

s

s

Cut

3/4"

3/4"

3/4"

Braze/Weld

5/64" - 2 5/8"

5/64" - 2 5/8"

5/64" - 2 5/8"

International Customer Care: 940-381-1212 / www.turbotorch.com

1/4" - 1/2"

1/4" - 1/2"

1/4" - 1/2"

1/4" - 1/2"

1/8" - 7/8"

1/8" - 7/8"

1/8" - 7/8"

3/8"

3/8"

3/8"

3/16" - 3/4"

3/16" - 3/4"

3/16" - 3/4"

FAX 940-483-8178

27


HVAC/R and Plumbing Air-Fuel Brazing & Soldering Equipment

See our full line catalog (Form No. 56-1252) or visit us on the web at www.turbotorch.com for more information. Deluxe Portable Torch Kit

Nitrogen Purge Kit

0386-1397

Air Fuel Equipment

The Deluxe Portable Torch Kit is designed to hold essential solder equipment and tools while providing the comfort and convenience necessary for easy handling and transporting. The kit includes a durable, soft tool bag, self-lighting PS-3T tip, ergonomic torch handle, STK-R regulator and 12 ft hose. It also features four bonus items: a hose clamp, PS-4T tip, PL-812 torch shield and a roll of premium Viper SX solder.

0386-1370 The ideal kit for HVAC and refrigeration installers and service technicians, the TurboTorch® Nitrogen Purge Kit gives professionals the tools they need to get the job done right. It’s perfect for purging HVAC and refrigeration lines, leak testing, flushing drainage lines, cleaning coils and components, and even inflating tires.

Viper ™ Brazing Alloys, Solders and Fluxes TurboTorch’s Viper is a complete line of brazing alloys, high silvers, solders and fluxes. These products are ideal for a variety of applications and deliver all the quality and performance professionals have come to expect from TurboTorch.

TurboTorch's NEW complete line of premium brazing alloys, solders and fluxes. Check out the TurboTorch catalog for more information.

28

U.S. Customer Care: 800-238-0282 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


Arc Welding Equipment and Accessories MIG Guns

Check out pages 30-31 for a reference chart on our favorite, top of the line MIG guns. Or see our full line catalog or visit us on the web at www.tweco.com for more information.

TwecoÂŽ Arc Welding Accessories 4WECO A BRAND OF 3T ,OUIS BASED 4HERMADYNE )NDUSTRIES )NC IS THE WORLDgSLARGESTSUPPLIEROFWELDINGACCESSORIES4HE4WECOLINEINCLUDES an extensive array of products from the basic manual welding tools and ACCESSORIES TO -)' GUNS CONSUMABLES AND A COMPLETE SELECTION OF PRODUCTSFORPRECISIONROBOTICWELDINGAPPLICATIONS4WECOISAN)3/ registered company.

Tweco Professional Arc Welding Equipment & Consumables Catalog (Form No. 64-2103)

Make the Switch. Increase Productivity.

THERE’S A LOT OF CHOICES OUT THERE.

I CHOOSE TWECO

EVERY TIME.

TWECO ADVANTAGE s%XCELLENTPERFORMANCEWITHHIGHPRODUCTIVITYLOWDOWNTIME s3UPERIORDURABILITYWITHLONGLASTINGGUNS s%XCEPTIONALEASEOFUSEWITHOPERATORAPPEAL

COMPANY: INDUSTRY:

BUSINESS PROFILE: DAE Industries designs, fabricates and installs aircraft engine stands, docking and maintenance stands, and aircraft maintenance tooling, and is always looking to increase productivity with the equipment its welders use.

TWECO MIG GUN PORTFOLIO s"ROADRANGEOFPRODUCTSFORDIFFERENTAPPLICATIONS s!IR COOLEDANDWATER COOLED-)'GUNS s3PECIALTYGUNSFORPULSEWELDING s3PECIALTYGUNSFORALUMINUMWELDING s3PECIALTYGUNSWITHSMOKEFUMEEXTRACTIONFEATURES

TOOL OF CHOICE: TwecoŽ Spray MasterŽ MIG Guns WHY THE TWECO SPRAY MASTER? “The Spray Masters have proven to be extremely dependable and tough, with zero failures to date,� says DAE Fabrication Manager, Dennis Cook. “We’ve experienced a 60-70% increase in total consumable life, which has created less downtime when changing out parts.�

TWECO OFFERS SUPERIOR FEATURES AND BENEFITS s%RGONOMICDESIGNTOREDUCEOPERATORFATIGUE s%XCELLENTCUSTOMERSUPPORTTOANSWERALLYOURTECHNICALQUESTIONS s7IDESTRANGEOF-)'GUNCONSUMABLESINTHEINDUSTRY s-EETABROADRANGEOFYOURAPPLICATIONNEEDS

TWECO TRUST

“This gun doesn’t overheat, so we can remain productive�

, A GLOBAL CUTTING AND

s)NDUSTRYSTANDARDFOROVERYEARS s/VERMILLION-)'GUNSSOLD s-OSTTRUSTED-)'GUNINTHEINDUSTRY

DAE Industries Commercial & Military Aircraft Aviation

DAE Industries carries the torch... will you?

WELDING LEADER, joins the American Welding Society in encouraging individuals to practice the art, craftsmanship and professions of welding, metalworking and fabrication. Victor ÂŽ, Thermal Dynamics ÂŽ, Thermal Arc ÂŽ, Arcair ÂŽ, Tweco ÂŽ, Stoody ÂŽ, CIGWELDÂŽ and TurboTorchÂŽ are among the

TWECO ADVANTAGE. TWECO TRUST.

Trusted

for safety, reliability and quality. www thermadyne c www.thermadyne.com

Visit www.twecotrust.com International Customer Care: 940-381-1212 / www.tweco.com

Thermadyne family of brands that you can count on BY

American Labor

www.twecotrust.com

FAX 940-483-8178

29


Arc Welding Equipment and Accessories

MIG Gun Selection Guide Solid Wire – Mild Steel and Stainless Steel

MIG Guns

Wire Diameter in.(mm)

Amperage Range 30-100

100-200

200-300

300-400

#/2

     

Recommended

Alternate

-).) -)'

0ROFESSIONAL.O

3PRAY-ASTER®0ROFESSIONAL.O

#OMPACT%LIMINATOR® 3MOKE-ASTER® %LIMINATOR3POOL'UN

3PRAY-ASTER0ROFESSIONAL.O

0ULSE-ASTER™!IR #OOLED #OMPACT%LIMINATOR 3UPRA®84 45&& . ,)4% 3MOKE-ASTER %LIMINATOR3POOL'UN

3PRAY-ASTER0ROFESSIONAL.O

0ULSE-ASTER!IR #OOLED #OMPACT%LIMINATOR 3TANDARD%LIMINATOR 3UPRA84 3MOKE-ASTER 3UPRA7ATER #OOLED

3PRAY-ASTER0ROFESSIONAL.O

0ULSE-ASTER!IR #OOLED 0ULSE-ASTER #OMPACT%LIMINATOR 3TANDARD%LIMINATOR 3UPRA7ATER #OOLED 3TANDARD7ATER #OOLED

Recommended

Alternate

0ROFESSIONAL.O

3PRAY-ASTER

&,58#/2%$3%&#3PRAY-ASTER

#OMPACT%LIMINATOR 0ROFESSIONAL.O

&,58#/2%$3%&#3PRAY-ASTER

0ROFESSIONAL.O #OMPACT%LIMINATOR  3UPRA84 45&& . ,)4%

&,58#/2%$3%&#3PRAY-ASTER

0ROFESSIONAL.O #OMPACT%LIMINATOR 3TANDARD%LIMINATOR 3UPRA84

&,58#/2%$3%&#3PRAY-ASTER

0ROFESSIONAL.O #OMPACT%LIMINATOR 3TANDARD%LIMINATOR

&,58#/2%$3%&#0ROFESSIONAL.O

0ROFESSIONAL.O #OMPACT%LIMINATOR 3TANDARD%LIMINATOR

Recommended

Alternate

%LIMINATOR3POOL'UN-).) -)'

0ROFESSIONAL.O

%LIMINATOR3POOL'UN3PRAY-ASTER

0ULSE-ASTER!IR #OOLED 0ROFESSIONAL.O #OMPACT%LIMINATOR

0ULSE-ASTER!IR #OOLED3PRAY-ASTER

0ULL-ASTERâ„¢ 0ROFESSIONAL.O #OMPACT%LIMINATOR 45&& . ,)4%

0ULSE-ASTER!IR #OOLED3PRAY-ASTER

0ULL-ASTER 0ROFESSIONAL.O #OMPACT%LIMINATOR 3TANDARD %LIMINATOR 45&& . ,)4%

0ULSE-ASTER!IR #OOLED3PRAY-ASTER

0ULL-ASTER 0ULSE-ASTER7ATER #OOLED 0ROFESSIONAL.O #OMPACT%LIMINATOR 3UPRA7ATER #OOLED

>400

  #/2

 

  #/2

 

Higher Argon mixture Higher Argon mixture

 

Higher Argon mixture 1/16" (1,6)

Wire Diameter in.(mm)

Amperage Range 30-100

100-200

200-300

300-400

400-650

3ELF SHIELDED .030" (0,8) 3ELF SHIELDED

Flux cored Wire

 

#/2OR  3ELF SHIELDED

 

#/2OR  #/2OR 

 

     

3ELF SHIELDED #/2OR  3ELF SHIELDED

3/32" (2,4)

#/2OR 

&,58#/2%$3%&#3ERIES-)''UNSARETOBEUSEDONLYWITH3ELF 3HIELDEDWIRE Wire Diameter in.(mm)

Solid Wire – Aluminum

.030" (0,8)

 

3/64" (1,2)

1/16" (1,6)

Amperage Range 30-150

150-250

250-350

350-450

>450

Argon

Argon

Argon

Argon

Argon 3/32" (2,4)

7HENWELDINGWITHALUMINUMWIRE STANDARD-)'GUNLENGTHOFFTSHOULDNOTBEEXCEEDEDANDCONDUITLINERSCONTACTTIPSMADESPECIlCALLYFORALUMINUMWIRESSHOULDBEUSED

30

U.S. Customer Care: 800-426-1888 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


Arc Welding Equipment and Accessories MIG Guns

Spray MasterÂŽ Series

Professional No. Series

s/PERATORAPPEALWITHERGONOMICHANDLETOREDUCE operator fatigue s&IELDREPAIRABLE s,OWERHEATINTHEHANDLEANDCONDUCTORTUBE s7IDEWELDINGAPPLICATIONSWITHSPRAYANDPULSEWELDINGMODES sDUTYCYCLE MIXEDGASES s-ODELS!MP !MP !MP

s/PERATORAPPEALANDINDUSTRYSTANDARDFOR YEARS s(EAVYDUTYANDRUGGED s&IELDREPAIRABLE s)MPROVEDWITHLONGERLIFECONSUMABLES sDUTYCYCLE #/2 s-ODELS.O!MP .O!MP .O!MP .O!MP .O!MP .O!MP

PulseMaster ™ Series

Eliminator ÂŽ Series

s/NE TOUCH ON THE FLYCONTROLSWITHSTANDARDAND “smartâ€? capabilities s%XCEPTIONALWELDBEADUSINGTWINPULSEWELDINGPARAMETERS s%XCEPTIONALOPERATORAPPEALANDREDUCEDOPERATORFATIGUE sDUTYCYCLE #/2 s-ODELS!MP !MP

s/PERATORAPPEALWITHERGONOMICHANDLE s&IELDREPAIRABLE s"ALLSOCKETCONDUCTORTUBEWITHARTICULATINGFEATURE s.O THREADCONTACTTIPWITHIMPROVEDINTERFACEBETWEENTIPDIFFUSER sDUTYCYCLE #/2 s-ODELS!MP !MP

Special Feature Series

Spool Gun Series

s3MOKE-ASTERÂŽ to reduce fumes and smoke from the welding process s&LUXCOREDGUNSTOWELDWITHSELF SHIELDED GASLESS flux cored wires s7ATER COOLEDGUNSFORWELDINGWITHCOMFORTAT higher amperages

s%LIMINATOR3POOLGUNWITHPISTOLGRIPANDHOLDvWIRESPOOLS 300A at 60% duty cycle s0ULL-ASTER™PUSH PULLGUNWITHPISTOLGRIP AVAILABLEINSTANDARD and “smartâ€? version; 300A at 60% duty cycle

International Customer Care: 940-381-1212 / www.tweco.com

FAX 940-483-8178

31


Arc Welding Equipment and Accessories

Consumables

MIG Consumables

Tips, Diffusers, Nozzles, Conductor Tubes and Wire Conduit to meet all your MIG gun needs. Here is just a sampling of our complete line. . .

Contact Tips

Nozzles

EliminatorÂŽ Style Contact Tips

Eliminator Style Nozzles

EL16T SERIES

EL16 SERIES

EL221 SERIES

Standard Contact Tips for Traditional and Spray MasterÂŽ Guns 3TANDARD 4APERED(EAVY$UTY3TYLES

11 SERIES

14T SERIES

EL22CT SERIES

REL22CT SERIES

Standard Nozzles for Traditional and Spray Master Guns 3TANDARD 4APERED(EAVY$UTY3TYLES

16S SERIES

21 SERIES

22 SERIES

HD22 SERIES

Chrome Copper "RZ" Contact Tips 23 SERIES 14RZ-45

23T SERIES

23H SERIES

16RZT-45

24A SERIES

24AT SERIES

24CT SERIES

34CT SERIES

Optional Nozzles

21-62-FAS

25CT-125-FAS

Diffusers

Wire Conduit

Eliminator Style Diffusers

Wire Conduits for All Guns %LIMINATOR 4RADITIONAL3PRAY-ASTER

EL52

EL52CT

Diffusers for Traditional Style Guns

51

52

Heavy Duty Diffuser for Spray Master Guns

54A

42-3035-15

EL52CT-16

"ERNARD -ILLERAND/8/AREREGISTEREDTRADEMARKSOF)LLINOIS4OOL7ORKS )NC%3!"ISAREGISTEREDTRADEMARKOF%3!"!"4REGASKISSISAREGISTEREDTRADEMARKOF4REGASKISS ,TD #ANADA The afore mentioned trademarks are in no way affiliated with Tweco or Thermadyne Industries, Inc.

32

U.S. Customer Care: 800-426-1888 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


Arc Welding Equipment and Accessories

KNUCKLEHEAD™ CONDUCTOR TUBES Amp/ Model

Bend Angle

Standard Cons.

Eliminator Long Reach Cons. (2" longer)

Part Number

Stock Number

PROFESSIONAL SPRAY MASTERÂŽ SERIES  

Flexible Conductor Tubes 

ÂŞ

x

MS62SFLX3-60

 

ÂŞ

x

MS62SFLX4-80

 

ÂŞ

x

MS63SFLX3-60

 

ÂŞ

x

MS63SFLX4-80

 

ÂŞ

x

MS64SFLX3-60

 

ÂŞ

x

MS64SFLX4-80

 

ÂŞ

x

x

MS64SFLX3-60LR

 

ÂŞ

x

x

MS64SFLX4-80LR

 

3560SFLX4-80 61SFLX4-80 62SFLX3-60 62SFLX4-80 64SFLX3-60 64SFLX4-80 64SFLX3-60LR 64SFLX4-80LR

               

MIG Consumables

Flexible Conductor Tubes

PROFESSIONAL CHOICE NO. SERIES -INI .O

Conductor Tubes

.O

Conductor Tubes for Eliminator, Traditional & Spray Master Guns ÂŞANDÂŞ4UBE!NGLES

.O .O

ÂŞ ÂŞ ÂŞ ÂŞ ÂŞ ÂŞ ÂŞ ÂŞ

x x x x x x x x

x x

PROFESSIONAL ELIMINATORÂŽ SERIES 

64EX-45

MS63-60S



ÂŞ

x

EL62SFLX3-60

 

ÂŞ

x

EL62SFLX4-80

 

ÂŞ

x

EL64SFLX3-60

 

ÂŞ

x

EL64SFLX4-80

 

ÂŞ

x

EL64SFLX4-80LR

 

x

STANDARD WELDSKILLÂŽ SERIES 

64J-60

35-60-60

400

ÂŞ

x

62SFLX3-60

 

ÂŞ

x

62SFLX4-80

 

ÂŞ

x

64SFLX3-60

 

ÂŞ

x

64SFLX4-80

 

ÂŞ

x

x

64SFLX3-60LR

 

ÂŞ

x

x

64SFLX4-80LR

 

/UTER*ACKET2EPAIR+IT !MP 0ART.O&,83* 2+3TOCK.O  !MP 0ART.O&,8,* 2+3TOCK.O  2EPAIR+ITSINCLUDETHENEOPRENEOUTERJACKETANDSTAINLESSSTEELSTRAPS

NEW TwecoÂŽ MIG Gun Website Visit our web site www.twecotrust.com TOSEEWHYTHE3PRAY-ASTERAND.O -)'GUNSARESTILLTHEINDUSTRYCHOICEFOR DEPENDABILITY AND RELIABILITY 3EE HOW A busy manufacturer with multiple welding and fabrication stations discovered the BENElTS OF CONVERTING TO 4WECO 3PRAY -ASTER -)' GUNS ,EARN HOW YOU CAN beneďŹ t your customer by converting or UPGRADINGTHEMTOTHE0ROFESSIONALLINE OF4WECO-)'GUNS

www.twecotrust.com International Customer Care: 940-381-1212 / www.tweco.com

FAX 940-483-8178

33


Arc Welding Equipment and Accessories

Manual Arc Welding Equipment

Manual Arc Welding Equipment TwecoTong速 Electrode Holders

Ground Clamps

200, 250, 300, 350, 400 & 500 Amp

Steel, Copper & Flat Ground Clamps

s#OPPERALLOYBODY s2EVERSIBLETOPANDBOTTOMINSULATORS s%FFICIENT POSITIONJAWPATTERNS s Fully insulated/protected springs s"ALL POINTCABLECONNECTION

s3TEELGROUNDCLAMP!! s#OPPERGROUNDCLAMP! !! s Flat ground clamp (200A & 300A)

A-532 (200A)

A-316 !

SGC-500

GC-300

FGC-500

!

(300A)

!

A-732 (300A)

Heavy Duty Rotary Ground Devices 400, 600, 800, 1500 & 2000 Amp

A-14 !

s Available with 1, 2 or 3 heads s3IMPLETENSIONADJUSTINGBOLTFORMAXIMUMEFFICIENCY s.OBRUSHES SPRINGSORMERCURY s 2" shaft

A-14-HD (400A)

RG-440

GCRG-140

!

(400A)

A-38-HD !

Roto-Work Grounding Clamps 500, 600, 1200 & 2000 Amp s7ORKINCONJUNCTIONWITHROTARYGROUNDDEVICES s,ARGETIGHTENINGSCREWSANDAMPLECONTACT surface area for efficient operation

Tweco-Tite速 Electrode Holder 400 Amp 4TT (400A)

34

WCGR-1200

GC-600-75

(1200A)

#lamp Only)

U.S. Customer Care: 800-426-1888 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


Arc Welding Equipment and Accessories

Terminals and TwecoLugs

Do you want to save time and money? Add convenience in welding with the 3WITCHABLE -AGNETIC 'ROUND #LAMP from Tweco. Designed for use in flat and PIPE APPLICATIONS 3WITCHABLE -AGNETIC 'ROUND#LAMPSAREEASYTOOPERATE EASY to mount and can withstand heat up to ÂŽ&ÂŽ# 4URNTHEKNOBCLOCKWISE and you instantly have a secure grip.

Screw-on Terminals s Fit 1/2" (12.7mm) terminal size s 3 sizes available

2-SF-50

Female Terminals sMM STUDHOLESIZE s Various configurations available Part Number

Manual Arc Welding Equipment

Switchable Magnetic Ground Clamps

Description

SMGC200

200 Amp

SMGC300

300 Amp

SMGC600

600 Amp

1-AF

1-OF

Ball-Point Connection Type Lugs

Cable Connectors MPC & Whip Cable Connectors

sMM STUDHOLESIZE s Various configurations available

s0OSITIVECAMACTIONOPTIMIZINGINTERFACING s Heat and oil resistance covers s:INCPLATEDCOVERANDBALL POINTCABLESCREWS s Various cable capacities & packages available

10-45

10-45C

40-180

40-180C

4-MPC

Heavy Duty Type Lugs

2-1-MPC

s-ECHANICALBALL POINT s Various configurations available

140-HD-180

TwecoLugsÂŽ Crimp & Solder Type

240-HD-180

s! ! !!2ATING s! !!2ATING0OWER#ABLE,UGS s Various cable sizes available

T-40HD

T-120

T-46

!

!

(90A)

International Customer Care: 940-381-1212 / www.tweco.com

140-HD-180C

FAX 940-483-8178

35


Quick Robotic MIG Guns & Accessories

QRA Series Robotic MIG Gun 600 Amp Air-cooled MIG Gun

Quick Robotics

4WECO 2OBOTICS 12! 3ERIES AIR COOLED -)' GUN BODY AND CABLE ASSEMBLIES PROVIDEMANYFEATURESTHATWILLENHANCEYOURROBOTICWELDINGAPPLICATION-)' GUNBODYANDCABLEASSEMBLIESAREFURNISHEDWITHTHESESTANDARDFEATURES

TwecoÂŽ Quick Robotics

s Improved quick tube locking s3TANDARDâ „8" (41.28mm) Ă˜ mounting cartridge sleeve s0RECISIONFRONTCASEASSEMBLYGIVESHIGHREPEATABILITYTO mount and conductor tube) s)NCHSWITCHMOUNTEDINAMOLDEDHOUSINGONTHEFRONT-)'GUNCASE s% STOPCABLEWITHCONNECTIONS s Both front and rear heavy cable support springs s+EVLARÂŽ.YLONOUTERPROTECTIVECABLE#OVER s Internal protective sleeve s)NTERNALPURGEHOSEFORSPRAYING0ROTEXÂŽ antispatter compound through the conductor tube and nozzle s&URNISHEDWITH4WECO2OBOTICS2 CONDUIT s Furnished with a TwecoÂŽ -ILLERÂŽ OR,INCOLNÂŽ2EAR#ONNECTOR0LUG

7ELCOME TO WORLD CLASS 4WECO 2OBOTICS -)' GUNS AND ACCESSORIES The engineers at Tweco have worked overtime to continue the tradition of DELIVERINGBESTINCLASSROBOTIC-)'GUNSANDACCESSORIESTHATWILLPROVIDE the reliability and value you expect from Tweco.

Robotic MIG Guns and Accessories QRL Series Robotic MIG Gun 400 Amp Lightweight Air-Cooled MIG Gun 4HENEW4WECO2OBOTICS1UICK2OBOTIC ,IGHT7EIGHT-)''UN12, OFFERSTHE IDEAL -)' GUN FORh4ABLE4OPv ROBOTS It is designed for everday applica tions that require a lighter weight and SMALLERPROFILEFORROBOTICWELDING-)' gun functions. s Quick conductor tube lock for easy conductor tube replacement sLIGHTERTHANTHE12!SERIES-)'GUN s% STOPCABLEWITHCONNECTIONS s3MALLERPHYSICALPROFILE s#OMPATIBLEWITHEXISTINGMOUNTARMS and uses current conductor tubes and consumables s%XTERNALPROTECTIVESLEEVE s0RECISIONFRONTCASEASSEMBLYGIVESHIGH repeatability to mount and conductor tube) s&URNISHEDWITH4WECO2OBOTICS 2 CONDUIT

36

QRW / QRWA Series Robotic MIG Gun 600 Amp Water-cooled & Water/Air-Cooled MIG Gun 4WECO2OBOTICSWATER COOLED-)'GUNBODYANDCABLEASSEMBLIESAREOFFEREDIN TWO CONFIGURATIONS4HE1273ERIESFEATURESAWATER COOLEDCABLEASSEMBLY WHILETHE127!3ERIESFEATURESANAIR COOLEDCABLEASSEMBLY"OTHACCEPTTHE 1427SERIESWATER COOLEDCONDUCTORTUBE4HE127!3ERIESPROVIDESMAXIMUM cooling at the conductor tube end with a rugged, trouble free cable assembly. s7ATERSHUT OFFVALVESLOCATEDINTHE-)'GUNBODYASSEMBLY s#OLOR#ODEDWATER INANDWATER OUTHOSESFOREASIERHOOK UP s7ATERHOSEQUICKCONNECTIONS s(IGHFLOWRATEn127!3ERIESnFORIMPROVEDCONDUCTORTUBECOOLING s,ARGERWATERLINESn127nFORIMPROVED conductor tube cooling

U.S. Customer Care: 800-426-1888 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


Quick Robotic MIG Guns & Accessories

Cleaning Station Accessories

RDM 2000 Series

QWT-3 Wire Trim Unit

TwecoÂŽ 2OBOTICS 2$-  3ERIES ˆ is a safety device designed to act as a switch between the conductor tube and the robot. s!VAILABLEIN4HREE MODELS 0ART.O2$-  3 3TOCK.O  nLIGHTDUTY 0ART.O2$-  -3TOCK.O  nMEDIUMDUTY 0ART.O2$-  (3TOCK.O  nHEAVYDUTY s Units come standard with an air assist feature allowing the robot TECHNICIANTOINCREASETHEBREAK AWAYPRESSUREWHENREQUIRED s% 3TOPCABLEASSEMBLY vLONG 0ART.O2$- *# 3TOCK.O  COMESSTANDARDWITHTHEUNIT

&ORUSEWITH12# 

Quick Robotics

RDM Series Deection Mount

QWT-3 QRM-3 Anti-Spatter Mist Applicator &ORUSEWITH12# 

QRC™-2000 Nozzle Cleaning Station 4HE 12# .OZZLE #LEANING 3TATION HAS AN ADVANCED 2OTARY )MPACT $RIVE 2)$ system which removes the spatter, ALLOWING THE CLEANED -)' GUN NOZZLE to continue the welding process. It also HAS A UNIQUE SELF EXHAUST 0$% CLEAN ing system that keeps debris from the reamer blade area. The revolutionary CLAMP MECHANISM ON THE 12#  system provides precise clamping on the nozzle.

QRM-3

QRM-100 Anti-Spatter Mist Applicator

s2OTARY)MPACT$RIVE2)$ SYSTEM s Dual stage pneumatic clamping device ensures positive, secure clamping on the nozzle s%ASYTOPROGRAM s4WO STAGECAMPLATECYLINDER is a solid block with universal arm s0NEUMATIC$RIVE%XHAUST0$% SYSTEM blows air through vent holes on the incline housing which helps prevent slag buildup in shaft area s Uses only half the air consumption of other cleaning stations s4OTALSTROKEINSIDENOZZLEMM s2EAMERBLADE12#  FIVECLAMP blocks and programming tools included with the unit

2EDUCE SPATTER BUILD UP IN YOUR -)' NOZZLE2EMOVALOFSPATTERMADEEASIER 0ROVIDE BETTER GAS FLOW AND IMPROVED weld quality. QRM-100

QRC-2000

See our full line catalog or visit us on the web at www.tweco.com for more information. Tweco Robotics Quick Robotic MIG Guns & Accessories Catalog

TC900 & TCV900 Series %NHANCE YOUR WATER COOLED -)' WELD ING PROCESS BY INCORPORATING A WATER COOLERFROM4WECO0RODUCTS s Vertical or horizontal models available s$ESIGNEDFOR-)'GUNSUPTO!MPS AND4)'TORCHESUPTO!MPS s3TAINLESSSTEELCONSTRUCTIONELIMINATES coolant contamination due to electrolyte and chemical reactions s High efficiency radiator design pulls outside air through radiator s Available with either gear or vane pumps. s0UMPBYPASSTOTANKONROTARYGEARPUMPn keeps pump from overheating s Vane pumps are equipped with a bypass to eliminate excessive pump wear

TC900

TCV900

(Form No. 64-2203)

International Customer Care: 940-381-1212 / www.tweco.com

Tweco Water Coolers

FAX 940-483-8178

37


Fixed Automation Arc Welding Equipment & Consumables

TAM Series Fixed Automation MIG Gun 400 Amp & 500 Amp Air-Cooled 4HIS SERIES OF !UTOMATION -)' GUNS IS OFFERED WITH AND WITHOUT A CABLE ASSEMBLY4HESERIESISONLYOFFEREDFORAIR COOLEDWELDINGAPPLICATIONS4HERE ARE TWO AMPERAGE RANGES AVAILABLE  AND  !MPS  DUTY CYCLE

both are offered with and without a cable assembly.

Fixed Automation

-OUNTING OF THIS PARTICULAR SERIES IS DIRECTLY TO THE 1/8v MM OUTSIDE DIAMETEROFTHE-)'GUNBARREL4HEOUTERSURFACEOFTHE-)'GUNBODYISINSU lated from the inner tube by a polyester molding compound providing excellent dielectric properties. 4!- SERIES WITH CABLE ASSEMBLIES ARE OFFERED IN LENGTHS OF  FT M TO FTM 

TwecoÂŽ Fixed Automation 4WECO 2OBOTICS OFFERS A COMPLETE LINE OF AUTOMATION -)' GUNS WITH OR WITHOUTCABLEASSEMBLIES4HEPRODUCTLINECONSISTSOFBOTHAIR COOLEDAND WATER COOLED-)'GUNSANDCABLEASSEMBLIES QF — TAM — RA — WRS %ACH SERIES OFFERS SOMETHING DIFFERENT THAT WILL MEET YOUR SPECIlC -)' ďŹ xed automation welding application speciďŹ cations. Thermadyne is excited to offer you incredible choices and innovation in FIXEDAUTOMATION-)'WELDINGEQUIPMENT/NLYTHEQUALITYYOUCOMETO expect from Tweco.

Fixed Automation MIG Guns and Accessories

RA Series Fixed Automation MIG Gun 400 Amp & 600 Amp Air-Cooled 4HISSERIESOF!UTOMATION-)'GUNSAREOFFEREDONLYWITHACABLEASSEMBLYAND STRICTLYFORAIR COOLEDWELDINGAPPLICATIONS4HEREARETWOAMPERAGERANGESTO CHOOSE FROM  AND !MPS  DUTY CYCLE -OUNTING SURFACE IS THE outer diameter of the 1/8� (41.28mm) plastic case. Five different bend configuration conductor tubes are available to choose from in each amperage range. The conductor tubes are keyed into the brass body of THEASSEMBLYALLOWINGACONDUCTORTUBETOBEREPLACEDANDTHEADJUSTMENTSTO be minimal when going from one tube configuration to another.

QF Series Fixed Automation MIG Gun QFA Air-cooled / QFW WaterCooled 4HIS SERIES OF !UTOMATION -)' GUNS IS offered with and without cable assem blies. The series incorporates some of the same features found on the Tweco 2OBOTICS12SERIES-)'GUNASSEMBLIES /FFERED FOR USE IN -)' AIR COOLED AND WATER COOLEDWELDINGAPPLICATIONS 7ELDINGAPPLICATIONSUSINGTHEAIR COOLED 1&SERIES-)'GUNSCANTAKEADVANTAGE OFTHEEIGHTDIFFERENTBENDCONFIGURATIONSOFAIR COOLED142CONDUCTORTUBES 7ELDING APPLICATIONS REQUIRING THE WATER COOLED 1& SERIES -)' GUNS UTILIZES THE WATER COOLED 1427 SERIES CONDUCTOR TUBES WHICH ARE AVAILABLE IN THREE different amperage ranges (300, 400, and 600), and eight different degrees of bend configurations.

See our full line catalog or visit us on the web at www.tweco.com for more information. Tweco Robotics Fixed Automation Arc Welding Equipment & Consumables Catalog (Form No. 64-2603)

38

U.S. Customer Care: 800-426-1888 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


Fixed Automation Arc Welding Equipment & Consumables

TwecoÂŽ Water Coolers

400 Amp & 600 Amp Water-Cooled

TC900 & TCV900 Series

Fixed Automation

WRS Series Fixed Automation MIG Gun

%NHANCE YOUR WATER COOLED -)' WELD ING PROCESS BY INCORPORATING A WATER COOLERFROM4WECO0RODUCTS

4HISSERIESOF!UTOMATION-)'GUNSARE offered only with a cable assembly and STRICTLY FOR AIR COOLED WELDING APPLICA tions. There are two amperage ranges TOCHOOSEFROM AND!MPS DUTYCYCLE-OUNTINGSURFACEISTHE outer diameter of the 1/8� (41.28mm) plastic case.

s Vertical or horizontal models available s$ESIGNEDFOR-)'GUNSUPTO!MPS AND4)'TORCHESUPTO!MPS s3TAINLESSSTEELCONSTRUCTIONELIMINATES coolant contamination due to electrolyte and chemical reactions s High efficiency radiator design pulls outside air through radiator s Available with either gear or vane pumps. s0UMPBYPASSTOTANKONROTARYGEARPUMPn keeps pump from overheating s Vane pumps are equipped with a bypass to eliminate excessive pump wear

Five different bend configura tion conductor tubes are available to choose from in each amperage range. The conductor tubes are keyed into the brass body of the assem bly allowing a conductor tube to be REPLACED AND THE ADJUSTMENTS TO BE minimal when going from one tube configuration to another.

TCV900

TC900

TJ-2 Tri-Just

QRM-100 Anti-Spatter Mist Applicator

An ideal holding fixture that provides A MEANS TO LOCATE AND HOLD YOUR -)' gun in place.

2EDUCE SPATTER BUILD UP IN YOUR -)' NOZZLE2EMOVALOFSPATTERMADEEASIER 0ROVIDE BETTER GAS FLOW AND IMPROVED weld quality.

QRM-100 TJ-2 TRI-JUST

TJ2-KB Keyed Bracket -)'GUNBRACKETFORUSEWITH4* 42) *534

TJ2-KB

International Customer Care: 940-381-1212 / www.tweco.com

FAX 940-483-8178

39


Air Carbon Arc Gouging Equipment & Accessories

K-Series Gouging Torches Medium & Extra Heavy Duty Straight Handle Manual Gouging Torches

Arc Gouging Equipment

s2ELIABLETORCHDESIGN s3WIVELCABLE s0OSITIVEGRIPHANDLE s2EDUCEDWEIGHT s High quality cable hose s2UGGEDCONSTRUCTION

K-5 %xtra Heavy Duty)

K-3 -edium Duty)

ArcairÂŽ Air Carbon Arc Gouging

Tri-ArcÂŽ Gouging Torch

!RCAIRPROVIDESACOMPLETELINEOFAIR CARBONARCPRODUCTSFORTHEWIDE ranging gouging needs of fabrication plants, shipyards, railroads and farms TONAMEAFEW!RCAIRISPROUDTOBEAN)3/REGISTEREDCOMPANY

Foundry Gouging Torch s.OTORCHAIRVALVE sÂŞSWIVELCABLE s0OSITIVEGRIPHANDLE s Optimum weight s High quality cable hose s2UGGEDCONSTRUCTION

Arc Gouging Equipment Angle-ArcÂŽ Gouging Torches

Gouging Electrodes

Light to Extra Heavy Duty Manual Gouging Torches

Electrodes for Any Application

s.ATURALÂŞTORCHANGLE sÂŞSWIVELCABLE s0OSITIVEGRIPHANDLE s2EDUCEDWEIGHT s High quality cable hoses s2UGGEDCONSTRUCTION

K5000 %xtra Heavy Duty)

K4000 (Heavy Duty)

s%XCELLENTARCSTABILITY s3UPERIORMETAL removal rate s#OOLOPERATION s Uniform diameter s#LEANMACHINE LIKEGROOVES or cuts s#OPPERCLADANDPLAIN s*OINTED FLATORPOINTED$#!#

K3000 (-EDIUM$UTY)

ProtexÂŽ Metalworking Chemicals For Various Applications

K2000 (,IGHT$UTY)

40

s!NTI 3PATTER s Alclean aluminum cleaner s4IP $IP s Zinc rich cold galvanizing s Available in convenient container sizes from ounces to GALLONDRUMS to meet your needs

U.S. Customer Care: 800-426-1888 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


Air Carbon Arc Gouging Equipment & Accessories

Slice Utility Pack

Slice Cordless Striker Pack

Part No. 63-991-026 4HE 3,)#% 5TILITY 0ACK PERMITS YOU TO use the exothermic cutting process to CUT VIRTUALLY ANY METALLIC NON METALLIC or composite material. The package has the basic items needed to do a cutting JOB PACKED IN A RUGGED TOOL BOX *UST supply oxygen and an ignition source and you are ready to cut.

Part No. 63-991-032 4HE 3,)#% #ORDLESS 3TRIKER 0ACK USES TWO SMALL LEAD ACID BATTERIES TO SUP ply a current surge sufficient enough to ignite both the 1/4� (6.4mm) and vMM BARE3,)#%#UTTING2ODS It includes one ignitor and charger. !VAILABLEINVOLT !#ONLY

Slice Industrial Pack

Slice Complete Pack

Part No. 63-991-021 4HE )NDUSTRIAL 3,)#% 0ACK PROVIDES the versatility of exothermic cutting and accommodates a larger oxygen cylinder to extend your cutting time. The industrial cart is capable of car rying a 9� (229mm) diameter cylin DER4HE )NDUSTRIAL 3,)#% 0ACK INCLUDES 3,)#%TORCHANDSTRIKERASSEMBLIESWITH 10 ft. (3m) oxygen hose and power cables.

Part No. 63-991-002 4HE3,)#%#OMPLETE0ACKCOMESINAN aluminum carrying case with every thing needed to quickly complete an EXOTHERMIC CUTTING JOB 4HIS MODEL IS well suited to the emergency type cut ting situations where seconds count. 7ITH THIS UNIT YOU GET THE TORCH RODS STRIKER  VOLTBATTERYWITHCHARGER v MM COLLET EXTENSION AND SHIELD REGULATOR AND AN EMPTY  CUBIC FOOT oxygen bottle.

Slice Battery Pack

Slice Exothermic Cutting Rods

Exothermic Cutting

SliceÂŽ Exothermic Cutting Systems

s Flux coated and uncoated s 1/4� and 3/8� diameter s Varying lengths s Designed specifically for use with slice cutting systems

Part No. 63-991-003 4HE 3,)#% "ATTERY 0ACK COMES IN A RUGGEDTOOLBOX!SWITHTHE5TILITY0ACK you get all the basic items needed to do ACUTTINGJOBSUCHASTORCH STRIKERAND RODS!LSOINCLUDEDINTHE"ATTERY0ACK ISA 6OLTRECHARGEABLE3,)#%"ATTERY Box Assembly.

Visit us on the web at www.thermadyne.com/arcair for more information. And look for our new Arcair comprehensive products catalog coming soon. International Customer Care: 940-381-1212 / www.tweco.com

FAX 940-483-8178

41


Air Carbon Arc Gouging Equipment & Accessories

Automated Metal-Removal Systems

Automation / CutSkill

Arcair-MaticŽ N6000 4HE !RCAIR -ATIC . -ETAL 2EMOVAL 3YSTEM WAS DESIGNED TO PROVIDE THE best levels of control, uniformity and productivity in automated gouging of steels ANDOTHERMETALSWITHTHEAIRCARBONARCPROCESS5SAGEOFTHE.3YSTEM HAS EXPANDED TO A WIDE VARIETY OF NEW AND UNIQUE JOBS 4HE . SYSTEM measures minute variations in the arc voltage or amperage, compares them with preset standards, and takes immediate action through its feedback control maintaining the precise arc gap for optimum gouging. 'ROOVEDEPTHISMAINTAINEDWITHINATOLERANCE¢vMM 4HE. 3YSTEMISIDEALLYSUITEDFORMETALFABRICATION PARTICULARLYINWELDJOINTPREPARA TION WHEREITISUSEDTOPREPAREUNIFORMh5vORh*vGROOVES4HE3YSTEMISALSO used extensively for backgouging of seams and for removing defective welds and cracks. s'OUGINGTHATISFIVETIMESFASTERTHANHAND held torches s'OUGESMOREACCURATEANDCONSISTENT s Automatic grooves that require less grinding than manually made grooves s%CONOMICAL* GROOVEAND5 GROOVEEDGE preparations

TitanŽ Machine Carriage N6000 Grooving Kits Packages Include: s Titan machine carriage s,IFTINGBRACKET s One 10’ track assembly s Three magnet & support bars s#ABLEHOSECLAMPASSEMBLY s Horizontal rack assembly s6ERTICALADJUSTMENTASSEMBLY s Automatic controller s 1600 Amp contactor

s Torch head s Air regulator s 2 each 4’ (1.2m) power cables svMM INTERCONNECTCABLE s 10’ (3m) remote pendant assembly s 3’ (1m) motor cable assembly s 4’ (1.2m) air hose assembly s0ERTINENTFASTENERS s#LAMPSANDHARDWAREPACKAGE

4HE'ROOVING+ITISDESIGNEDFORFLATWORKONLYSUCH AS DECK PLATES )T IS COMPLETELY SELF CONTAINED AND easily moved as a single unit with a forklift or crane from workpiece to workpiece. 4HE /UTRIGGER +IT IS SPECIFICALLY DESIGNED TO travel along the web plate on fabricated bridge girders used for railroad and highway bridges.

ArcairÂŽ CutSkillÂŽ Arc Gouging Equipment CutSkill Arc Gouging Torches

CutSkill Arc Gouging Carbons

CS3000 & CS4000 Gouging Torches

!RCAIR IS NOW PROUD TO INTRODUCE THE !RCAIR #UT3KILL LINE OF CARBONS !RCAIR #UT3KILL CARBONS ARE YOUR ALTERNATIVE IF YOU ARE LOOKING FOR QUALITY AND VALUE !RCAIR#UT3KILLCARBONSHAVEBEENDEVELOPEDBYTHESAMEENGINEERSWHOHAVE MADE THE !RCAIR 2EDBOX 0ROFESSIONAL CARBON ELECTRODE THE WORLDgS LEADING carbon for over fifty years.

s Two designs; select the one you need sgANDgCABLES AVAILABLEWITHTORCHBODY SEPARATELYFORBOTHTHE#3AND#3 s2UGGED LASTINGRELIABILITY s Ideal for most metals s3PEEDSUPWELDREMOVAL BACKGOUGING edge preparation, defect repair & MANYOTHERMETALREMOVALJOBS sÂŞSWIVELPROMOTESFREEMOVEMENT to position the torch, more efficient natural angles, and a more natural movement of the arm and wrist s%RGONOMICALLY designed handle

42

Pointed Carbons Jointed Carbons Hollow Carbons

CS3000

The Arcair CutSkill Advantage: s Faster gouging s,EADINGMETALREMOVALRATES s2EDUCEDSLAG s#OOLOPERATION s-INIMIZEDENVIRONMENTALIMPACT s Different types of electrodes to fit your application s%ASYTOOPERATE s Versatile

U.S. Customer Care: 800-426-1888 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


#1 FOR A REASON Tom Wermert PROFESSION: Product Line Manager, Welding Products COMPANY: Thermadyne Industries NAME:

JOB EXPERIENCE: With 35 years of experience across all levels of the welding and cutting industries, Tom Wermert still has the same devotion for work as he did at age 20. As Product Line Manager for Thermadyne® Welding Products, Wermert puts equipment through rigorous testing to ensure only the highest quality product makes it to the market. TOOL OF CHOICE: Arcair® Angle-Arc® K4000 Manual Gouging Torch WHY THE ARCAIR ANGLE-ARC K4000? “If anyone understands what it takes to make professional-grade tools it’s me,” says Wermert. “Products like the K4000 don’t become the industry standard by accident. The K4000’s ability to handle heavy-duty metal removal applications like weld preparations in fab shops and shipyards are second to none.”

“Arcair remains the number one name in air carbon arc manual torches” A GLOBAL CUTTING AND

Tom carries the torch...will yyou?

WELDING LEADER, joins the American Welding Society in encouraging individuals to practice the art, craftsmanship and professions of welding, metalworking and fabrication. Victor ®, Thermal Dynamics ® , Thermal Arc ®, Arcair ®, Tweco ®, Stoody ®, CIGWELD® and TurboTorch® are among the Thermadyne® family of brands that you can count on for safety, reliability and quality. www.thermadyne.com

www.thermadyne.com/arcair


Automated Plasma Cutting Systems, Torches & Accessories

Conventional Automated Systems

A U T O M AT I O N

Thermal DynamicsÂŽ Offers a Full Line of Automation Equipment to Meet The Most Demanding Applications. CUTMASTERÂŽ A-Series Automation 7ITHALLTHEADVANTAGESOFTHE4ORCHÂŽ and proven #54-!34%2 reliability, the new #54-!34%2 ! 3ERIES DELIVERS THE BEST in productivity, precision, and performance in Automation. 3YSTEMS FEATURE #.# INTERFACE 4ORCH WITH !4#ÂŽ Quick $ISCONNECTAND$IAGNOSTIC,%$STONAMEAFEW

A40 s 1â „4" (6mm) production capacity s  !MPS !MPSMAX ADJ s $UTY#YCLE !  ! s 3,364ORCHWITH 3URE,OKÂŽ Technology s #.#INTERFACE

A60 s 3â „8" (10mm) production capacity s  !MPS !MPSMAX ADJ s $UTY#YCLE !  ! s 3,364ORCHWITH 3URE,OKÂŽ Technology s #.#INTERFACE

A80 s 1â „2" (12mm) production capacity s  !MPS !MPSMAX ADJ s $UTY#YCLE !  ! s 3,364ORCHWITH 3URE,OKÂŽ Technology s #.#INTERFACE

A120 s â „8MM PRODUCTIONCAPACITY s  !MPS !MPSMAX ADJ s $UTY#YCLE !  ! s 3,364ORCHWITH 3URE,OKÂŽ Technology s #.#INTERFACE

44

Auto-CutŽ Series Conventional Automation 4HE 4HERMAL $YNAMICS !UTO #UT 3ERIES DELIVERS PREMIUM CUT PERFORMANCEONBOTHMILDSTEELANDNON FERROUSMATERIALS4HE power supplies are designed for reliable, low cost operation. &EATURES LIKE THE 84Š  CONSUMABLE PARTS CARTRIDGE AND THE -ACHINES3TATUS-ESSAGE#ENTERMAKETHE!UTO #UTUNITSEASY to operate.

Auto-Cut 100 s s s s s s s s



â „8MM PRODUCTIONCUT â „4" (20mm) maximum cut MM EDGESTART $UTY#YCLE ! 6  !MPS 84 TORCHANDLEADS 7ATER-IST3ECONDARY7-3ÂŽ) #% #3! ### 3

Auto-Cut 200 s s s s s s s s

MM PRODUCTIONCUT 11â „4" (30mm) maximum cut MM EDGESTART $UTY#YCLE ! 6  !MPS 84 TORCHANDLEADS 7ATER-IST3ECONDARY7-3 #% #3! ###

Auto-Cut 2002 s s s s s s s s s

MM PRODUCTIONCUT 11â „2" (40mm) maximum cut MM EDGESTART $UTY#YCLE ! 6  !MPS 84 TORCHANDLEADS 7ATER-IST3ECONDARY7-3 High speed oxygen cutting #% #3! ###

U.S. Customer Care: 866-279-2628 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


Automated Plasma Cutting Systems, Torches & Accessories A U T O M AT I O N

Conventional Automated Systems

XT™ Torch Technology for Maximum Performance

XT-301 Torch s s s s

@,EAKLESSTORCHHEADDESIGN 3ELF CENTERINGCOMPONENTS %XCELLENTCUTSONALLMETALS ,ONGERPARTSLIFEWITH -AXIMUM,IFEŽ consumables s +EYLESSCONSUMABLESCARTRIDGE s 2EVOLUTIONARY3PEED,OK™ cartridge DESIGNALLOWSQUICKCHANGE OVERS

Patented XT Torch Technology brings plasma cutting to new LEVELS OF PRECISION AND PRODUCTIVITY 4HE DESIGN OF THE 84  torch and consumable cartridge ensure precise relocation of components after a process change.

0LASMA'AS Distributor

3HIELD'AS Distributor

3HIELD #UP

84 4ORCH(EAD #ARTRIDGE

%LECTRODE Tip 3HIELD#AP

Auto-Cut ÂŽ 300

GCM-1000 – Gas Control

s 11â „4" (30mm) production cut s 11â „2" (40mm) maximum cut s 23â „4" (70mm) edge start s $UTY#YCLE ! 6 s  !MPS s 84 TORCHANDLEADS s 7ATER-IST3ECONDARY7-3ÂŽ) s #% #3! ###

0LASMAANDSECONDARYGASPRESSURESAND7-37ATER-IST3ECONDARY mOWS are precisely controlled at the power supply with dedicated regulators.

GCM-2000 – Gas Control

Auto-Cut 3002 s s s s s s s s s

1

-ANUALLYCONTROLLEDPLASMAAND shield gases with dedicated regulators, pressure gauges and owmeters.

1 â „2" (40mm) production cut 13â „4MM MAXIMUMCUT MM EDGESTART $UTY#YCLE ! 6  !MPS 84 TORCHANDLEADS 7ATER-IST3ECONDARY7-3 High speed oxygen cuttingg #% #3! ###

Water Mist Secondary (WMS)

SC-11 s s s s s s

s ,OWOPERATINGCOSTS s $ROSS FREECUTTING s Oxide free surface s %ASYTOUSE

International Customer Care: 940-381-1212 / www.thermal-dynamics.com

-ANUALTORCHUPDOWN Actual and preset voltage display 0IERCEDELAY Arc voltage input to 200V 3TATUS,%$S #ORNERLOCKOUT

4ORCH,IFTER

/PERATOR#ONTROL

FAX 940-483-8178

45


Automated Plasma Cutting Systems, Torches & Accessories

High Precision Automated Systems

A U T O M AT I O N

Ultra-CutÂŽ Series High Precision Automation

Ultra-Cut 100

The Thermal DynamicsÂŽ 5LTRA #UT 3ERIES DELIVERS PREMIUM PRECISIONPLASMACUTTINGONMILDSTEELANDNON FERROUSALLOYS 7ITHCONSUMABLEPARTSFORPRECISIONCUTTINGFROMGAGETO MM ITSTHEONLYPLASMASYSTEMYOUWILLNEED

Misc. Control Modules

1

â „2" (12mm) production cut â „8MM MAXIMUMCUT 3 â „4" (20mm) edge start $UTY#YCLE ! 6  !MPS 84Š TORCHANDLEADS 7ATER-IST3ECONDARY7-3ÂŽ) #% #3! ### 

Ultra-Cut 200 s s s s s s s s

GCM-2010 Gas Control Module s 0LASMAANDSECONDARYGASCONTROL s Dedicated regulators, owmeters and gauges s Digitally controlled RAS-1000 Remote Arc Starter s 7ATER COOLEDNEGATIVE(&COIL s 2ATEDTO!MPS

DFC-3000

MM PRODUCTIONCUT 11â „2" (40mm) maximum cut 21â „2" (62mm) edge start $UTY#YCLE ! 6  !MPS 84 TORCHANDLEADS 7ATER-IST3ECONDARY7-3 #% #3! ###

Ultra-Cut 300 s s s s s s s s

Designed speciďŹ cally for use with 5LTRA #UTSYSTEMS THEAUTOMATED $IGITAL&LOW#ONTROLCONSISTSOF THREESEPARATEMODULES s DMC-3000 #ENTRAL-ANIFOLD#ONTROL s DPC-3000 $IGITAL0RESSURE#ONTROL s TSC-3000 4OUCH3CREEN#ONTROLLER

s s s s

@,EAKLESSTORCHHEADDESIGN 3ELF CENTERINGCOMPONENTS 0RECISIONCUTSONALLMETALS %XTREMEPARTSLIFEWITH84,™ consumables s +EYLESSCONSUMABLESCARTRIDGE s 2EVOLUTIONARY3PEED,OK™ cartridge DESIGNALLOWSQUICKCHANGE OVERS

3HIELD #UP

11â „2" (40mm) production cut 13â „4MM MAXIMUMCUT MM EDGESTART $UTY#YCLE ! 6  !MPS 84 TORCHANDLEADS 7ATER-IST3ECONDARY7-3 #% #3! ###

Unique ‘Keyless’ Consumables Cartridge

XT-300 Torch

3HIELD #AP2ETAINER

s s s s s s s s

4HE UNIQUE #ONSUMABLES #ARTRIDGE HOUSES CONSUMABLE PARTS ONLY NO BUILT IN HEADTORCH BODY TO DRIVE REPLACEMENT COSTS UP #HANGINGCARTRIDGESISFASTANDEASY ACOUPLEOFTWISTSANDTHE unique ‘rapid engagement’ retaining collar threads release the CARTRIDGE$OWN TIMEISREDUCEDTOSECONDSANDYOUCANchange from one process to another or from one application to another quickly and easily. 3HIELD'AS Distributor

0LASMA'AS Distributor

84 4ORCH(EAD Tip

%LECTRODE

#ARTRIDGE

3HIELD #AP

46

U.S. Customer Care: 866-279-2628 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


Automated Plasma Cutting Systems, Torches & Accessories A U T O M AT I O N

s 4ORCHHEIGHTADJUSTABLEINDISTANCE and voltage s "UILT INCOLLISIONSENSOR s Arc voltage range s %ASYTOOPERATE s 0IERCERETRACT

s s s s s s s

MM MAXIMUMCUT 3 â „4" (20mm) piercing $UTY#YCLE ! 6  !MPS ,IQUIDCOOLEDTORCH .2 !R (2, plasma #% #3! ###

TA-500/1000 s MM MAXIMUMCUT s MM PIERCING s $UTY#YCLE#YCLE  !! 6 s 0ARALLELEDTO!MPS s ,IQUIDCOOLEDTORCH s .20LASMA s (EAVYNON FERROUS

High Precision Automated Systems

PAKÂŽ 45

SC-3000 Height Control

The TA-500 SystemISSPECIlCALLYDESIGNEDFORHIGH PERFORMANCE MACHINES MOUNTEDPRODUCTIONCUTTING

International Customer Care: 940-381-1212 / www.thermal-dynamics.com

FAX 940-483-8178

47


Manual Plasma Cutting Systems, Torches & Accessories

CUTMASTER 39

Manual Systems

s s s s s s s s

â „4" (6mm) recommended cut capacity â „8MM MAXIMUMCUT Auto pilot restart for expanded metal  !MPS ADJUSTABLE $UTY#YCLE ! 3,ÂŽ 1Torch 7EIGHSLBS !PPLICATIONSPLUMBING(6!# auto body / marine repair, home shop, rental eets, metal building & roof construction 

CUTMASTER 52

CUTMASTER, Why TRUE? 4HENEW#54-!34%2Ž425%Š3ERIESHASBEENDESIGNEDWITHTHE IDEATHATTHERECOMMENDEDCUTCAPACITYSHOULDALSOBETHE425% cut capacity. The 425%3ERIESELIMINATESTHECONCEPTOFHAVINGTOhBUYUPvn purchasing a machine larger than you actually need. 7ITHTHEINTRODUCTIONOFTHE#54-!34%2425%3ERIES AMACHINE with a recommended cut capacity of 1⠄2" (12mm) will cut 1⠄2" MATERIAL!,,$!9%6%29$!9

TRUTHS #1: True ConďŹ dence – 4HE #54-!34%2 ÂŽ 425%Š 3ERIES MICROPROCESSORCONTROLLEDFRONTPANEL,%$SASSUREEXTREME operator conďŹ dence and error free use from setup to clean up. #2: True Strength – 4HE#54-!34%2 425%3ERIESALLOWSYOUTO work all day at our recommended cut capacity. But when you need that extra punch, you can be conďŹ dent that it’s there. #3: True Protection – As if a  9%!2 unlimited power supply WARRANTY WASNT ENOUGH THE #54-!34%2 425% 3ERIES IS THEONLYLINEOFPLASMACUTTINGMACHINESTHATFEATURES425% '5!2$Š – a rugged roll bar for added durability #4: True Tip – 4HE4HERMAL$YNAMICS#54-!34%2425%3ERIES plasma system offers the only 60 Amp drag cutting tip on the market today. #5: True Flexibility – 4HE NEW -5,4) 6/,4!'% #54-!34%2 425%3ERIESFEATURESTHEmEXIBLE PATENTED4ORCHÂŽ . There’s one set of consumable parts for the entire range of machines, LEAD EXTENSIONS PROVIDE CUTTING UP TO g M FROM power supply, and the exibility to move quickly from hand TOMECHANIZEDCUTTINGWITHTHECHANGEOFATORCH!DD0#" FOR#.#INTERFACE #6: True Portability – 4HE #54-!34%2 425% 3ERIES OFFERS lighter, more portable machines without compromising performance.

48

1

s s s s s s s s s

1

â „2" (12mm) recommended cut capacity 11â „8" (30mm) maximum cut Auto pilot restart for expanded metal 60 Amp drag tip  !MPS ADJUSTABLE $UTY#YCLE ! 3,4ORCH 7EIGHSLBS !PPLICATIONSCONSTRUCTION maintenance/repair, fabrication

CUTMASTER 82 s 3â „4" (20mm) recommended cut capacity s s s s s s s

11â „2" (40mm) maximum cut Auto pilot restart for expanded metal  !MPS ADJUSTABLE $UTY#YCLE ! 3,4ORCH 7EIGHSLBS !PPLICATIONSHEAVYFABRICATION manufacturing, contractors

CUTMASTER 102 s s s s s s s s

MM RECOMMENDEDCUTCAPACITY 13â „4MM MAXIMUMCUT Auto pilot restart for expanded metal  !MPS ADJUSTABLE $UTY#YCLE ! 3,ÂŽ 1Torch 7EIGHSLBS !PPLICATIONSHEAVYFABRICATION manufacturing

CUTMASTER 152 s s s s s s s s

11â „4" (30mm) recommended cut capacity MM MAXIMUMCUT Auto pilot restart for expanded metal  !MPS ADJUSTABLE $UTY#YCLE ! 3,4ORCH 7EIGHSLBS !PPLICATIONSHEAVYFABRICATION manufacturing

U.S. Customer Care: 800-426-1888 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


Manual Plasma Cutting Systems, Torches & Accessories

TRUE GUARD™ roll bar provides easy transportation and protects the front and rear of the power supply for unmatched durability.

Universal selectable input power from 208 to 460 VAC Âą 10%, single or three phase, 50 or 60 Hz.

Lightweight design improves portability (Reduced nearly 50%).

Convenient storage compartment for spare and consumable parts

Color Coded LEDs indicate pressure status and setup errors.

The Industry's only 60 Amp Drag Tip

Manual Systems

Superior Performance Features

All user controls are conveniently located on the front panel.

Trigger feature prevents hand fatigue during long cuts. Auto Pilot Restart feature instantly reignites the pilot arc while cutting expanded metals.

Multiple Torch Capability Cappa (Hand, Mechanized, Automation) Auut

Note: Features apply to 52, 82, 102 and 152 models only.

Ordering Information Product Description

Catalog No.

Plasma Cutting Systems CUTMASTERŽ 39 with SL60 Ž 75° hand torch, 20 ft. (6.1m) lead

110/230V 1 phase

CUTMASTER 52 with SL60 75° hand torch, 20 ft. (6.1m) lead CUTMASTER 52 with SL60 75° hand torch, 50 ft. (15.2m) lead CUTMASTER 52 with SL100 Ž 180° machine torch, 25 ft. (7.6m) lead* CUTMASTER 52 with SL100 180° machine torch, 50 ft. (15.2m) lead* CUTMASTER 102 with SL100 75° hand torch, 20 ft. (6.1m) lead CUTMASTER 102 with SL100 75° hand torch, 50 ft. (15.2m) lead CUTMASTER 102 with SL100 180° machine torch, 25 ft. (7.6m) lead* CUTMASTER 102 with SL100 180° machine torch, 50 ft. (15.2m) lead*

Catalog No. Note: All CUTMASTER TRUE Series systems are designed to accept multi-voltage input; they can be ordered pre-conďŹ gured for the voltage most likely to be used. The two conďŹ gurations of catalog numbers listed are set up so that the machine is ordered in the conďŹ guration most often used by the individual customer, so that they do not need to add or change input power cable to operate upon receipt of the machine.

1-3830 208/230V 1 Phase

460V 3 Phase

1-5130-1

1-5130-2

1-5131-1

1-5131-2

1-5132-1

1-5132-2

1-5133-1

1-5133-2

1-1330-1

1-1330-2

1-1331-1

1-1331-2

1-1332-1

1-1332-2

1-1333-1

1-1333-2

CUTMASTER 82 with SL60 75° hand torch, 20 ft. (6.1m) lead CUTMASTER 82 with SL60 75° hand torch, 50 ft. (15.2m) lead CUTMASTER 82 with SL100 180° machine torch, 25 ft. (7.6m) lead* CUTMASTER 82 with SL100 180° machine torch, 50 ft. (15.2m) lead* CUTMASTER 152 with SL100 75° hand torch, 20 ft. (6.1m) lead CUTMASTER 152 with SL100 75° hand torch, 50 ft. (15.2m) lead CUTMASTER 152 with SL100 180° machine torch, 25 ft. (7.6m) lead* CUTMASTER 152 with SL100 180° machine torch, 50 ft. (15.2m) lead*

Torch Leads Packages

Hand

Torch Leads Packages

SL60, 75° 20 ft. (6.1m) torch/leads SL60, 75° 50 ft. (15.2m) torch/leads SL100, 75° 20 ft. (6.1m) torch/leads SL100, 75° 50 ft. (15.2m) torch/leads SL60, 90° 20 ft. (6.1m) torch/leads SL60, 90° 50 ft. (15.2m) torch/leads SL100, 90° 20 ft. (6.1m) torch/leads SL100, 90° 50 ft. (15.2m) torch/leads

7-5204 7-5205 7-5206 7-5208 7-5260 7-5260** 7-5263 7-5263***

SL100, 180° 5 ft. (1.5m) torch/leads SL100, 180° 10 ft. (3.0m) torch/leads SL100, 180° 25 ft. (7.6m) torch/leads SL100, 180° 35 ft. (10.6m) torch/leads SL100, 180° 50 ft. (15.2m) torch/leads

Torch Accessories Pinion Assembly Automation Interface Kit (TRUE Series 82,102 and 152)

9-8310 7-2827

AirCutÂŽ 15C s s s s s s s

460V 3 Phase

1-1130-1

1-1130-2

1-1131-1

1-1131-2

1-1132-1

1-1132-2

1-1133-1

1-1133-2

1-1730-1

1-1730-2

1-1731-1

1-1731-2

1-1732-1

1-1732-2

1-1733-1

1-1733-2

Auto

Mech.

7-4001 7-4002 7-4003

7-5213 7-5214 7-5215 7-5216

* Systems include machine torch with 1 3/8" (34.9mm) diameter/32 pitch, rack mounting tube, hand pendant control and pinch block. Pinion assembly to be ordered as an accessory. ** Use 7-5260 with 7-7545 for a SL60, 50 ft. (15.2m) *** Use 7-5263 with 7-7545 for a SL100, 50 ft. (15.2m)

PAKÂŽ 200 s 11â „2" (40mm) recommended

1

â „8" (3mm) recommended cut capacity â „16MM MAXIMUMCUT "UILT INAIRCOMPRESSOR !MPS lXED $UTY#YCLE ! 0#( TORCH ,IGHTDUTYnLBS 3

International Customer Care: 940-381-1212 / www.thermal-dynamics.com

208/230V 1 Phase

s s s s s s

cut capacity 23â „4" (70mm) maximum cut  !MPS ADJUSTABLE $UTY#YCLE ! 0#( TORCH ,IQUID COOLEDTORCH Dual gas capacity

FAX 940-483-8178

49


Manual Plasma Cutting Systems, Torches & Accessories

1TorchÂŽ RPTÂŽ Torches

Manual Torches

1Torch – the most innovative and reliable, high performance REPLACEMENT TORCH AVAILABLE TODAY .O OTHER TORCH PERFORMS SO WELL WITH SO MANY MAJOR BRANDS OF POWER SUPPLIES OFTEN WITH CUTTINGRESULTSBETTERTHANTHEORIGINALMANUFACTURERSTORCH s%ASILY ATTACHED TO VIRTUALLY ALL MANUFACTURERS SYSTEMS WITH superior performance s)NCLUDESTHE3URE,OKÂŽ electrode locking system permitting quick, precise changes of consumables s/UT OF THE BOXREADYFORALLMODESOFOPERATIONINCLUDING$RAG 3HIELD#UTTING 3TANDOFF#UTTINGAND$RAG4IP#UTTING s.OMOVINGCONSUMABLEPARTS s3TANDARDSETOFCONSUMABLESFORALLPOWERSUPPLIES

!LLYOUNEEDISTHE4ORCH204TORCHANDTHEAPPROPRIATE!DAPTER +IT%ACHTORCHCOMESCOMPLETEWITHEASY TO INSTALLINSTRUCTIONS

ATCŽ Quick Disconnect Option If you need additional exibility, the 4ORCH 204 TORCH IS ALSO AVAILABLE WITH !4# !DVANCED 4ORCH #ONNECTOR  4HIS quick disconnect enables you to change out a damaged torch, convert from a hand to machine torch, or put on a different sized torch in a matter of seconds and no tools are required to complete the task. You can also customize the length OFYOURLEADSBYADDING!4#,EAD%XTENSIONSINFTM FT M ORFTM LENGTHS

1Torch SL60 ÂŽ "ROCHURE  FOR3,

s ,IGHT-EDIUMDUTYTORCH s  !MPCAPACITY s !VAILABLEINÂŞORÂŞ NOTFOR3, TORCH head conďŹ guration s 3TANDARDCONNECTIONOR !4#QUICKDISCONNECTAVAILABLE NOTFOR3,

1Torch SL100

ÂŽ

"ROCHURE  FOR3,

s -EDIUM(EAVYDUTYTORCH s  !MPCAPACITY s !VAILABLEINÂŞ ÂŞORÂŞ NOTFOR3, TORCH head conďŹ gurations s 3TANDARDCONNECTIONOR!4#QUICK DISCONNECTAVAILABLENOTFOR3,

Torch Adapter Kits The model of the plasma cutting system must be known to determine the adapter kit required.

Catalog Number

Power Supply Model ESABÂŽ

PCM-SMi, 500i, 625i, PCS-43 PCS-53, 80, 90 ESP-100i PCM-750i, 875, 1000i, 1125 Sidewinder 30,55,105 PowercutÂŽ 650 Powercut 875, 1125 Powercut 1250, 1500

7-3425 7-3435 7-3426 7-3429 7-3434 7-3464 7-3465 7-3462

HYPERTHERM ÂŽ

Max ÂŽ40, HTÂŽ40 (H/F Start) Max 70, 80, 100 (w/ & w/o Q.D.) Max 42*, 43*, 40cs*, PowermaxÂŽ600*, 800*, 900* (w/o Q.D.) Powermax 1100* Powermax 1000*, 1250* Max 40cs* (w/o Q.D.) Powermax 380* Powermax 600* (w/o Q.D.) Powermax 800*, 900*(w/o Q.D.)

Powermax 1650* Powermax 350* Powermax 190C*

7-3430 7-3454 7-3455 7-3461 7-3476 7-3477 7-3480 7-3481 7-3483 7-3484 7-3485

L TECÂŽ

PCM-31, SMi, 32i/34i, VPi PCM-500i, 625i, PCS-80i PCM-50A, 70, 80, 52i/54i, 82i/84i ESP-100i, PCM-50, PCM-100 (Single Gas) PCM-50, P-MC-100 (Dual Gas) PCS-40 PCM-750i, 1000i PCM-101

7-3425 7-3426 7-3430 7-3435 7-3436

MILLERÂŽ

Plazcut 60†/Zipcut SpectrumŽ 250D, 500, 750 Spectrum 700, 1000,1250,PLUS Spectrum 3080* Spectrum 650*, 701*, 2050* Spectrum 300* Spectrum 375* Spectrum 625*

7-3432 7-3433 7-3430 7-3456 7-3457 7-3476 7-3477 7-3478

PAKÂŽ 3XR, 5XT, 6XR, 7XR, 625XR, 750XR

7-3446

PAK 8XR, 10XR, 1000XR, 1250XR, PakMaster ÂŽ 75, 100

7-3434

PakMaster 50XL/XLP, 75XL/XLP, 100XL/XLP, CUTMASTER ÂŽ 50, 75, 80XL, 100

7-3447

EconoPAKÂŽ

PakMaster 25, 38XL, 25, Drag-GunÂŽ 38, PAK 4Xi, 6Xi, PAK 2XT, Dynapak ÂŽ 110 PakMaster 50 w/Smart Torch (Q.D) EconoPAK 50 EconoPAK 100 PAK 5 PAK 10

7-3443 7-3445 7-3449 7-3450 7-3444 7-3436

* Non-HF Systems. †The Miller PlazCut machines with Serial Numbers beginning JE are not compatible with 1TorchŽ RPT Torches. NOTES: Each Adapter Kit includes connection fitting, electrical connectors and installation instruction sheets for the selected power supply. ESAB, L-TEC and Power-Cut are registered trademarks of ESAB AB; LINCOLN and Pro-Cut are registered trademarks of Lincoln Electric Co.; HYPERTHERM, Max and powermax are registered trademarks of Hypertherm, Inc.; MILLER and Spectrum are registered trademarks of Miller Electric Mfg. Co.; none of the afore mentioned registered trademarks are in any way affiliated with Thermal Dynamics or Thermadyne Industries, Inc.; THERMAL DYNAMICS, PAK, CUTMASTER, PakMaster, EconoPAK, Dynapak and Drag-Gun are registered trademarks of Thermal Dynamics Corp.

50

U.S. Customer Care: 800-426-1888 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


Manual Plasma Cutting Systems, Torches & Accessories

For SL60ÂŽ / SL100ÂŽ Manual Cutting and Gouging Operations.

Drag Tip Cutting The preferred method of cutting light gauge metal up to 1/4" (6mm) THICKNESS0RODUCESTHEBESTCUTQUALITYNARROWESTKERFWIDTH FASTESTCUTTINGSPEEDS AND with little to no distortion. Traditional drag cutting was limited to 40 Amps or less, now with Thermal Dynamics Ž425%#UT$RAG4IP3ERIESŠTECHNOLOGYITISPOSSIBLETOCUTUPTO!MPS &OR BEST RESULTS USE THE 3HIELD #UP WITH THE TORCH TIP IN DIRECT CONTACT WITH THE WORK UP TO 60 Amps).

Standoff Cutting The preferred method of cutting metal thicker than 1/4" (6mm) and at CURRENTLEVELSABOVE!MPS0ROVIDESMAXIMUMVISIBILITYANDACCESSIBILITY5SETHESINGLE PIECEHIELDCUPFORgSTANDOFFgCUTTINGWITHTHETORCHTIPMM TOMM FROMTHE work piece). Use the shield cup body together with the deector for extended parts life and improved resistance to reect heat. This combination provides cutting results similar to the single piece shield cup, as well as easy changeover to gouging or drag shield cutting. Drag Shield Cutting 4HISISANOPERATOR FRIENDLYMETHODOFCUTTINGBETWEENTO Amps while maintaining a constant standoff distance. For metal thickness greater than 1/4" (6mm), simply drag the shield cup in contact with the work piece. Use the shield cup body with the appropriate drag shield cup matching the current level being used. This method is not RECOMMENDEDFORCUTTINGLIGHT GAUGESHEETMETAL

Gouging !SIMPLEMETHODOFMETALREMOVALBYANGLINGTHETORCHTOALEADANGLEOFÂŞ ÂŞ ANDUSINGAGOUGINGTIP7HILEMAINTAININGACONSTANTSTANDOFFDISTANCE THISALLOWSFORONLYA partial penetration into the work, thus removing metal from the surface. The amount of current, travel speed, standoff distance, lead angle, and tip size will determine the amount of material removed and the proďŹ le of the gouge. You can use the shield cup body with either the gouging shield cap or the shield deector. Also, you can use the single piece shield cup.

les Output Range

Depth

Width

Tip A

40 Amps (max)

Shallow

Narrow

Tip B

50 - 100 Amps

Deep

Narrow

Tip C

60 - 120 Moderate Amps

Tip D

60 - 120 Amps

Tip E

120 Amps

le

Torch Consumables

1TorchÂŽ Consumable Parts Application Guide

Moderate

Shallow

Wide

Moderate

Wide

1Torch, a trademark of Thermal Dynamics Corporation, is registered with the U.S. Patent and Trademark OfďŹ ce, and is the subject of trademark registrations and pending applications in numerous other countries. For information on trademark registrations of Thermal Dynamics Corporation, contact the local trademark ofďŹ ces in the countries of interest.

1Torch Consumable Parts Selection Guide For SL60 / SL100 Manual Cutting and Gouging Operations. Various front-end parts are available for different applications. The electrode and start cartridge remain the same for all applications.

International Customer Care: 940-381-1212 / www.thermal-dynamics.com

FAX 940-483-8178

51


Manual Plasma Cutting Systems, Torches & Accessories

Accessories

Torch Cutting Guides (cont.)

Thermal Dynamics offers accessories to help improve cutting performance.

Universal Standoff Cutting Guide

ÂŽ

Torch Cutting Guides / Guide Kits Cutting Guide Kit (Deluxe) #AT.O 

Accessories

#UTSCIRCLESFROMvMM TOvMM with proper cutting attachments. 4HISKITINCLUDESEASYADD ONATTACHMENTSTOlTMOST Thermal Dynamics torches for precise straight line, CIRCLECUTTINGANDBEVELING)NCLUDES#ARRYING#ASE 2ADIUS2OLLER +IT   #IRCLE #UTTING 'UIDE +IT   -AGNETIC0IVOT 3UCTION0IVOT

#AT.O  A great new standoff guide speciďŹ cally designed to lT ALL SHIELD CUP DESIGNS FOR 0#(  0#(  3,ÂŽ AND 3,ÂŽ 204ÂŽ TORCHES !DJUSTABLE standoff height.

CUTMASTER Ž TRUE™ Series Standoff Cutting Guides #AT.O #54-!34%2   .EWSTANDOFFGUIDESDESIGNEDTOlTTHE3,3, TORCHES SPECIlC TO THE #54-!34%2 425% 3ERIES systems. The standoff is preset.

Circle Cutting Guide Kit #AT.O  #UTSvMM TOvMM CIRCLESUSING magnetic attachment) when cutting or beveling is required. For use with most Thermal Dynamics TORCHES'UIDESHOWNWITHOPTIONALPIVOT  

Miscellaneous Torch Accessories

Radius / Roller Cutting Guide Kit

Leather Leads Cover

#AT.O 

4HIS EASY TO USE GUIDE CUT CIRCLES FROM v MM UP TO v MM  -AINTAINS A CONSISTENT height off the work piece whether you are using the circle cutting attachment for cutting circles ORTHEROLLERGUIDEFEATURETOIMPROVEYOURSTRAIGHT line cutting. Both novices and experts will see noticeable IMPROVEMENTINQUALITY SPEEDANDPARTSLIFE#ANBE used with most Thermal Dynamics torches.

FTM FTM FTM FTM

       

These leads covers are suitable for both 1TorchÂŽ and 3URE,OKÂŽLEADS3NAPSMAKEITEASYTOINSTALL3NAP two covers together for wider torches.

Trigger Guard Kits 3URE,OK4ORCHES0#( 0#( 

Torch Guide / Circle Cutting Attachment

#AT.O  3HORT4RIGGER'UARD #AT.O  ,ONG4RIGGER'UARD

#AT.O 

4ORCH3,3,

#UTSvMM TOvMM CIRCLES$ESIGNED FOR USE WITH THE 0#(-  4ORCH THIS ACCESSORY CANBEUSEDASEITHERA2OLLER'UIDEORA#IRCLE#UTTING 'UIDE

#AT.O  3HORT4RIGGER'UARD #AT.O  ,ONG4RIGGER'UARD These guards offer additional protection from accidental activation or damage to the torch switch.

Remote Pendant Control #AT.O  FTM

Straight Line Cutting Guide

2EMOTE0ENDANT#ONTROLFORYOUR mechanized application.

#AT.O  Introducing a new cutting guide accessory suitable FOR ALL HAND TORCHES 0#(  THROUGH 0#(  This versatile, straight line cutter is for hand held SYSTEMS AND IT CUTS VERTICAL ÂŞ OR BEVEL CUTS Its consistent standoff improves cut quality and MAXIMIZES OVERALL PERFORMANCE 0RODUCES MORE EFlCIENT STRAIGHT LINE CUTS ,IGHTWEIGHT MINIMUM SETUPTIMEANDNOPOWERREQUIRED-AGNETICMOUNTS ensure placement and ease of use. Optional suction PLATES AVAILABLE FOR NON MAGNETIC APPLICATIONS IE ALUMINUM AND STAINLESS STEEL  4HE #UTTING 'UIDE+ITINCLUDESFTM STANDARDRAIL4ORCH (OLDERAND"USING(EAVY$UTY-AGNETSEA 3LIDE !SSEMBLY7HEELSAND&ASTENERS/PTIONALFTM EXTENSIONS  AVAILABLE

52

Hand Pendant Extension #AT.O  FTM

ATCÂŽ Lead Extensions*

FTM FTM FTM

     

!VAILABLE FOR ANY SYSTEM USING 4ORCH WITH !4# 1UICK $ISCONNECT ,EADS %XTENSIONS ENABLE YOU TO CUSTOMIZEYOURLEADLENGTHTOSUITTHECUTTINGJOB

.OTE&ORUSEWITHHANDMECHANIZEDTORCHESONLY7ILLNOTWORKWITHAUTOMATIONTORCHLEADS

U.S. Customer Care: 800-426-1888 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


Manual Plasma Cutting Systems, Torches & Accessories

Automation Accessories

For improved consumable parts life and overall performance, Thermal Dynamics RECOMMENDS!IR&ILTER+ITSBEUSEDONALLPLASMACUTTINGSYSTEMS

Automation Interface Kit* #AT.O 

.OTE2EQUIREDFOR3# TORCHHEIGHTCONTROL

Single Stage Air Filter Kit #AT.O &ILTER"ODY  (OSE  &ILTER%LEMENT  For use with shop compressed air systems, this IN LINE lLTER WILL NOT ALLOW MOISTURE OR WATER TO pass through the ďŹ lter element even if it becomes COMPLETELY SATURATED 4HIS HI TECH lLTER ELEMENT actually blocks the absorption of water to increase performance and improve consumable parts life.

CNC Harness Cable

Accessories

Air Filter/Air Filter Kits

#AT.O 

CNC Interface Cable FTM FTM FTM FTM

       

Pinion Assembly

Two Stage Air Filters

#AT.O MM $IAMETER FTM  

#AT.O  &OR0AK-ASTER8,3YSTEMS #AT.O  &OR#54-!34%23ERIESŠAND0AK-ASTERÂŽ3YSTEMS #AT.O  &OR#54-!34%2425%3ERIESAND! 3ERIES 4HE 4WO 3TAGE !IR &ILTER WILL REMOVE MOISTURE AND contaminants from the air stream when using compressed air. The ďŹ lter is capable of ďŹ ltering to at LEASTMICRONS4HElLTERASSEMBLYISPRE ASSEMBLED at the factory and need only be installed on the power supply.

First Stage Element Cat. No. 9-1021 Second Stage Element Cat. No. 9-1022

Torch Coolant Extra Cool™ Coolant #AT.O  2ESISTSFREEZINGDOWNTO ª& ª#

Ultra Cool™ Coolant #AT.O  2ESISTSFREEZINGDOWNTO ª& ª#

Portable Gear Extreme Cool™ Coolant

Multi-Purpose Cart

#AT.O 

#AT.O 

2ESISTSFREEZINGDOWNTO ÂŞ& ÂŞ#

Designed for most portable manual cutting systems SUCH AS THE #54-!34%2    OR ANY OTHER similar sized systems. This rugged steel cart has easy rolling 8� (203mm) diameter wheels along with 3� (76mm) front mounted casters. This cart also serves as an excellent showroom display stand.

De-I Cool™ Coolant #AT.O  $E IONIZEDWATERMIXTUREFORUSEWHERE freezing protection is not required.

Miscellaneous Accessories Plasma Cutting Techniquess DVD #AT.O 

Welding Gloves #AT.O 

Welding Gloves #AT.O 

International Customer Care: 940-381-1212 / www.thermal-dynamics.com

FAX 940-483-8178

53


Arc Welding Power Supplies Inverter Arc Welders NEW 95 S Portable DC Welder 95 S Inverter Arc Welders

s6 PH (Z s!MPSWELDINGOUTPUT s3IMPLEEASY READYTOWELDPACKAGE s Ultralight and portable – 10 lbs. s0REFECTFORHOBBYISTS MAINTENANCE repair, and light fabrication s!VAILABLEIN3TICKAND 3TICK4)'PACKAGESSHOWN

Thermal ArcÂŽ Welding Systems Thermal Arc is on the move! The Thermal Arc family of arc welding PRODUCTSHASBEENCOMPLETELYOVERHAULED RE ENGINEEREDANDEXPANDED to meet your expectations in performance, reliability and value.

Inverter Arc Welders Professional ArcMasterÂŽ Series ArcMaster 185 ACDC s 6 PH (Z s !$#4)'  !!#4)'  !$#3TICK  !!#3TICK s!#$#3TICK (&,IFT4)' s Job save and load s#OMPLETEPACKAGESAVAILABLE

ArcMaster 200 ACDC s 6 PH (Z s !$#4)'  !!#4)'  !$#3TICK  !!#3TICK s!#$#3TICK (&,IFT4)' s Job save and load s#OMPLETEPACKAGESAVAILABLE

ArcMaster 300 ACDC s 6 PH (Z s !$#  !!#4)' s!#$#3TICK (&,IFT4)' s Job save and load s#OMPLETEPACKAGESAVAILABLE

ArcMaster 300TS s 6 PH (Z s !MPSWELDINGOUTPUT s$#3TICK (&,IFT4)' s Job save and load s#OMPLETEPACKAGESAVAILABLE

54

5 Year*

-OST NEWLY REDESIGNED 4HERMAL !RC ARC WELDING POWERSUPPLIESCOMEWITHAPOWERFULYEARWARRANTY on parts, 3 years on labor.

,IMITEDWARRANTY REFERTOWARRANTYSCHEDULEFORDETAILS

U.S. Customer Care: 800-426-1888 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


Arc Welding Power Supplies

ArcMaster 400S

ArcMaster 400MSTP

s 6 PH (Z s !MPSWELDINGOUTPUT s$#3TICK ,IFT4)' s#OMPLETEPACKAGESAVAILABLE

s 6 PH (Z s !  6 s$#3TICK (&,IFT4)' -)' 0ULSE-)' s*OB3AVEAND,OAD s#OMPLETEPACKAGESAVAILABLE

ArcMaster 400MST

Inverter / MIG Arc Welders

Professional ArcMasterÂŽ Series

s 6 PH (Z s !  6 s$#3TICK (&,IFT4)' -)' s Job save and load s#OMPLETEPACKAGESAVAILABLE

MIG Arc Welders WeldSkillÂŽ FabricatorÂŽ Series Fabricator 140

Fabricator 210

s 120V, 1ph, 60 Hz. s !MPSWELDINGOUTPUT s$#&LUX#ORED -)' s 2 roll wire feed system s#OMPLETEPACKAGESAVAILABLE

s 6 PH (Z s !MPSWELDINGOUTPUT s$#&LUX#ORED -)' s 2 roll wire feed system s#OMPLETEPACKAGESAVAILABLE

Fabricator 180 s 230V, 1ph, 60 Hz. s !MPSWELDINGOUTPUT s$#&LUX#ORED -)' s 2 roll wire feed system s#OMPLETEPACKAGESAVAILABLE

Fabricator 251 s 6 PH (Z s !MPSWELDINGOUTPUT s$#&LUX#ORED -)' s 2 roll wire feed system s#OMPLETEPACKAGESAVAILABLE

Fabricator 190 s 230V, 1ph, 60 Hz. s !MPSWELDINGOUTPUT s$#&LUX#ORED -)' s 2 roll wire feed system s#OMPLETEPACKAGESAVAILABLE

Fabricator 281 s 6 PH (Z s !MPSWELDINGOUTPUT s$#&LUX#ORED -)' s 2 roll wire feed system s Includes removable wire feeder

International Customer Care: 940-381-1212 / www.thermalarc.com

FAX 940-483-8178

55


Arc Welding Power Supplies MIG Arc Welders Professional Synergic Pulse Series

MIG Arc Welders

PowerMaster 320SP s6 PH (Z s !MPSWELDINGOUTPUT s$#3TICK 4)' -)' 3MART-)'™, 0ULSE-)' 4WIN0ULSE® #!' s"UILT INWIREFEEDER s#OMPLETEPACKAGESAVAILABLE

PowerMaster 400SP s6 PH (Z s !MPSWELDINGOUTPUT s$#3TICK 4)' -)' 3MART-)' 0ULSE-)' 4WIN0ULSE #!' s Integrated or remote wirefeeder s#OMPLETEPACKAGESAVAILABLE s Available with remote wirefeeder s Automation model available

PowerMaster 500SP s6 PH (Z s !MPSWELDINGOUTPUT s$#3TICK 4)' -)' 3MART-)' 0ULSE-)' 4WIN0ULSE #!' s2EMOTEWIREFEEDER s#OMPLETEPACKAGESAVAILABLE s Automation model available

56

U.S. Customer Care: 800-426-1888 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


Arc Welding Power Supplies Wire Feeders

Professional Series

Professional Series

UltimaÂŽ 150

Hefty II CC/CV

s 6 PH (Z s !,OW  !(IGH s$#0LASMA!RC7ELDING s3MOOTH$#!RC s0ILOTARC #URRENTLIMITER s0REVIEWSETCURRENT s3IMPLEINTERFACE s Includes unit, quick change torch, spare parts kit, coolant

s 6$# VOLTAGESENSING s 8 Amps max input current s )0- MMIN s 0.024"  MM s 2 gear driven feed rolls s 30 lbs. (13.6kg) max spool size

Plasma / Wire Feeders

Plasma Arc Welders

WC-100B Console s0ILOT!RC3TARTING s!UTOMATIC-ANUAL/PERATION s,%$DISPLAY!MP6OLTDISPLAY s3HIELDGASFLOWMETERS s(I,OPILOTCURRENTSWITCH

HE-100A Coolant Recirculator s For Thermal Arc torches up to 300A s(IGHEFFICIENCY NON FERROUS internal construction s2EUSABLEMETALFILTER sGAL, COOLANTCAPACITY

WC-1 Controller s#OMPACTMICRO PROCESSORSYSTEM s&ORUSEWITH5LTIMAOR 7# " s Accurate & repeatable parameter control s0ULSERCONTROLSWARPAGE penetration and weld puddle s3LOPERFUNCTION sTwo programmable outputs (plasma power source & cold wire feed motor drive control) s 32 user selectable weld schedules

WF-100 Wire Capstan Feeder s#OMPACT LIGHTWEIGHTPRECISIONFEEDER s2OBOTICORAUTOMATIONFIXTUREAPPLICATIONS s7EIGHSLESS4HANLBS s Better wire drive contact by wrapping wire around wire drive wheel

International Customer Care: 940-381-1212 / www.thermalarc.com

FAX 940-483-8178

57


Hardfacing & Specialty Alloy Welding Electrodes & Wires

Signature Products Selection Guide PROCESS

Signature Products

Wear Mode

Build-up & Joining Alloys

Metal to Metal Alloy

Metal to Earth Alloy “Moderate Abrasion”

Metal to Earth Alloy “Extreme Abrasion”

Temperature Abrasion Corrosion

Product

Base Metal

General Use

Stoody® Build-up

Carbon steel

Build-up

Stoody Build-up LH

Carbon steel

Build-up

Nicromang™

Manganese steel

Build-up & Joining

Versalloy™ Plus

Carbon & Manganese steel

Stoody 110

Carbon & Manganese steel

Build-up & repair

Stoody 2110

Carbon & Manganese steel

Build-up & repair

Castweld 55

Cast iron

Joining, Build-up & repair

Castweld 99

Cast iron

Joining, Build-up & repair

Stoody 1105

Carbon & Low alloy steel

Metal to Metal wear

Super Build-up

Carbon & Low alloy steel

Metal to Metal wear

Stoody 19

Carbon & Low alloy, and Manganese steel

Severe abrasion, low impact

Stoody 965

Carbon & Low alloy, and Manganese steel

Moderate abrasion, high impact

Stoody 31

Carbon & Manganese steel

Moderate abrasion, moderate impact

Stoody 101HC

Carbon & Low alloy and Manganese steel

Severe abrasion, low impact

Stoody 121

Carbon & Low alloy and Manganese steel

Moderate to severe abrasion, & moderate impact

Stoody 130

Carbon & Low alloy steel

Extreme Abrasion & low impact

Vancar™

Carbon & Low alloy steel

Extreme Abrasion & low impact

Acetylene Tube Borium (ATB Bare)

Carbon & Low alloy steel

Extreme Abrasion & low impact

Stoodite 6

Carbon & Low alloy and Stainless Steel

High temperature abrasion & corrosion resistance

Stoodite 21

Carbon & Low alloy and Stainless Steel

High temperature abrasion & corrosion resistance

Build-up, repair & joining (Joining Carbon Steel to Stainless steel)

GTAW SMAW FCAW GMAW

ss ss ss s

s s s s s s s s s s s s s s ss

s s

Oxy-Acetylene

ss ss

s s s s

See our full line signature products catalog (Form No. 2102A) or visit us on the web at www.stoody.com for more information. (part numbers, data sheets, etc.)

58

U.S. Customer Care: 800-426-1888 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


Hardfacing & Specialty Alloy Welding Electrodes & Wires

AVAILABLE SIZES Wire

APPLICATIONS Electrodes

0.045", 1/16", 3/32", 7/64"

0.045", 1/16", 3/32"

Hammers, Carbon Steel Shovel Pads, Shaft, Rolls, Pump Parts 1/8", 5/32", 3/16", 1/4"

Tractor Rollers, Steel Shovel Pads, Tractor Idlers, Sprockets, Shafts

1/8", 5/32", 3/16", 1/4"

Dredge Pumps Parts, Crusher Jaws, Impact Breaker Bars, Hammers

3/32", 1/8", 5/32" 0.045", 1/16", 3/32", 7/64"

General purpose Stainless, good for joining Stainless to dissimilar metals Shovel Teeth, Turbine Cone, Shovel Pads, Crusher Rolls, Drive Tumblers

1/8", 5/32", 3/16", 1/4" 1/16", 3/32"

(Partial Listing)

Steel Frogs, Switch Points, Hammers, Shovel Teeth, Roll Crushers

3/32", 1/8", 5/32"

Joining build-up, and repair of cast iron parts Pump Impellers, Pump Castings, Housings, Engine blocks and Heads

3/32", 1/8", 5/32"

Similar applications as Castweld 55 with focus on hairline cracks

1/8", 5/32", 3/16", 1/4"

Tractor Rollers & Idlers, Idler Sprockets, Drive Tumblers, Churn Drills Gear Teeth, Sprockets, Steel Shovel Pads, Carbon Steel Shafts

0.045", 1/16", 7/64" 1/8", 5/32", 3/16", 1/4" 0.045", 1/16"

Crusher Rolls, Dredge Parts, Pump Shells, Impellers, Impact Breaker Scrappers Tillage Tools, Dredge Parts, Shedder Knives, Extruder Screws

1/8", 5/32", 3/16", 1/4"

Bucket Arms, Chain Links, Rolling Mill Guides, Pulley, Scrappers, Blades

0.045", 1/16", 5/64"

Bucket Slides & Lips, Blades, Clam Shell bucket, Augers, Scraper Sides

0.045", 1/16", 5/64"

Scraper Slides, Scraper Cutters Vibrator Ditcher Shanks, Pot Hole Augers Muller Plows, Chisel Plow, Ammonia Injectors, Raymond Mill Plows

1/16", 7/64" 5/32", 3/16"

1/16", 3/32", 7/64"

1/8", 5/32", 3/16", 1/4"

0.045", 1/16", 3/32"

Signature Products

We’ve made it simple

1/8", 5/32", 3/16", 1/4", 5/16"

Farm Drill Points, Dry Cement Pump Screws, Drill Pipe Stabilizer, Paddles Plow Points, Cane Knives, Teeth, Tool Drill Bits

Valves Trim, Pump Sleeves, Engine Valves, Pulp Digester Blades, Dies

(also in bare rod)

0.045", 1/16"

1/8", 5/32", 3/16", 1/4", 5/16"

Cavitation Applications, Hot Working Dies, Turbine Runners, Valve Seat

(also in bare rod)

International Customer Care: 940-381-1212 / www.stoody.com

FAX 940-483-8178

59


Hardfacing & Specialty Alloy Welding Electrodes & Wires

Stainless Steel Flux Cored Wires

Interactive CD-ROM with Hardfacing Solutions 34//$9 %802%33  IS THE INDUSTRYS lRST INTERACTIVE #$ 2OM FOR HARDFACING ALLOY SELECTION 0ROGRAM INCLUDES !LLOY !DVISOR APPLICATION 2ECOMMENDATIONS AND DATA SHEETS FOR ALL 3TOODY 0RODUCTS 4AP INTO 3TOODYSYEARSOFHARDFACINGINDUSTRYEXPERIENCEANDTECHNICALSUPPORT Call Stoody Customer Care or visit our website to request a FREE copy of this CD and other information on STOODY.

StoodyÂŽ Hardfacing & Welding Wires 3TOODY IS THE WORLDgS LEADER IN THE PRODUCTION OF WELDING WIRES AND electrodes used to combat various types of wear and corrosion. Our EXTENSIVEFAMILYOFPRODUCTSINCLUDES)RON .ICKEL #OBALT 4UNGSTENAND 6ANADIUMBASEDALLOYS3OMEOFTHEMAJORINDUSTRIESWESERVEAREPOWER generation, mining, construction, railroad, steel, foundry, oil and gas production and exploration as well as the pulp and paper industry.

Stainless Steel Flux Cored Wires BRILLIANT 410NiMo T-1 AP Stoody AP stainless steel wires are designed for welding in all positions with Argon/CO2 gas mixtures. These wires exhibit a spray like arc transfer, easy slag removal and can be welded within a wide range of parameters. AWS classification A5.22-95 410NiMoTI-4. Stoody 410NiMoT-1 AP wires can be used to join martensitic stainless steels such as 410 used in valve and pump manufacturing. These wires can also be used for the repair and joining of CA-6NM castings. Typical Composition: Carbon, Manganese, Silicon, Chromium, Nickel, Molybdenum

Typical Deposit Characteristics: Tensile Strength, Ksi (MPa) .............................................. 134 (880) Yield Strength, Ksi (Mpa).................................................. 118 (776) Elongation (%) .............................................................................. 19 Charpy V-Notch Toughness @ 32°F (0°C) .........25ft-lbs (34 Joules)

Part Number 11921000

Packaging

Wire Diameter in. mm Shielding Gas 1/16 1.6 75% Ar, 25% CO2

33# WB, VP

Welding Parameters Amps Volts 190-250 26-27

BRILLIANT 2209 T-1 AP Stoody AP stainless steel wires are designed for welding in all positions with either 100% CO2 (X=1) or Argon/CO2 (X=4) gas mixtures. These wires exhibit a spray like arc transfer, easy slag removal and can be welded within a wide range of parameters.

Part Number 11892000 11892100

Stoody 2209T-1 AP wires can be used to weld duplex stainless steels which contain approximately 22% Chromium. The composition is balanced to achieve a microstructure of approximately 50% ferrite and 50% austenite in the weld deposit. AWS classification A5.22-95 E2209TO-X.

0.045" (1.2mm) Amps Volts WFS in/min (m/min)

1301 24 227 (5.8)

1651 26 315 (8.7)

1901 26 445 (11.3)

2202 27 565 (14.4)

1/16" (1.6mm) Amps Volts WFS in/min (m/min)

1701 25 115 (3.9)

2101 26 195 (4.9)

2501 27 245 (6.2)

3002 28 320 (8.2)

Typical Deposit Chemistry: Carbon, Manganese, Silicon, Chromium, Nickel, Molybdenum, Nitrogen Typical Deposit Characteristics: Tensile Strength, Ksi (MPa) .............................................. 122 (842) Yield Strength, Ksi (Mpa).................................................. 101 (670) Elongation (%) ........................................................................... 27.5 Charpy Impact Toughness @ -40°F (-40°C) ......33ft-lbs (20 Joules)

60

Packaging 33# WB, LLW 33# WB, LLW

Notes: Electrical stick-out 1/2"

Wire Diameter in. mm 0.045 1.2 1/16 1.6

1. Flat and vertical welding

2. Flat welding only

U.S. Customer Care: 800-426-1888 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


Hardfacing & Specialty Alloy Welding Electrodes & Wires

StoodyÂŽ AP stainless steel wires are designed for welding in all positions with either 100% CO2 (X=1) or Argon/CO2 (X=4) gas mixtures. These wires exhibit a spray like arc transfer, easy slag removal and can be welded within a wide range of parameters. Stoody 308LT-1 AP wires can be used to join AISI 301, 302, 304 commonly used in the chemical industry and food processing applications. AWS classification A5.22-95 E308LT1-X. Typical Deposit Chemistry: Carbon, Manganese, Silicon, Chromium, Nickel Typical Deposit Characteristics: 75 AR/25 CO2 Tensile Strength, Ksi (MPa) ............................. 88 (610) Elongation (%) ...................................................... 39 Yield Strength, Ksi (Mpa)................................. 63 (435)

100% CO2 86 (600) 41 60 (415)

Part Number 11953600 11819000 11819100

Packaging

Wire Diameter in. mm 0.035 0.9 0.045 1.2 1/16 1.6

25# WB 33# WB 33# WB

0.035" (0.9mm) Amps Volts WFS in/min (m/min)

1001 25 275 (6.9)

1201 26 374 (9.5)

1501 27 480 (12.2)

1702 27 600 (15.3)

0.045" (1.2mm) Amps Volts WFS in/min (m/min)

1301 24 227 (5.8)

1651 26 315 (8.7)

1901 26 445 (11.3)

2202 27 565 (14.4)

1/16" (1.6mm) Amps Volts WFS in/min (m/min)

1701 25 115 (3.9)

2101 26 195 (4.9)

2501 27 245 (6.2)

3002 28 320 (8.2)

Notes: Electrical stick-out 1/2"

1. Flat and vertical welding

Stainless Steel Flux Cored Wires

308L T-1 AP

2. Flat welding only

308L T-1 FH Stoody FH stainless steel , flux cored wires are designed for flat and horizontal welding applications, using either 100% CO2 (X=1) or Argon/CO2 (X=4) gas mixtures. These wires exhibit a spray like arc transfer with very low levels of spatter, a slag system that is essentially self-releasing, a smooth evenly ripped bead appearance, and deposition rates which are obtained at lower levels of heat input than competitive products. Stoody 308LT-1 FH wires can be used to join AISI 301, 302, 304 commonly used in the chemical industry and food processing applications. AWS classification A5.22 E308LT0-X. Typical Deposit Chemistry: Carbon, Manganese, Silicon, Chromium, Nickel Typical Deposit Characteristics: 75 AR/25 CO2 Tensile Strength, Ksi (MPa) ............................. 87 (600) Elongation (%) ...................................................... 37 Yield Strength, Ksi (Mpa)................................. 62 (430)

100% CO2 84 (573) 38 60 (415)

Part Number 11703100 11869400 11869300

Packaging 35# WB, VP 33# WB, VP 33# WB, VP

Wire Diameter in. mm 0.035 0.9 0.045 1.2 1/16 1.6

0.035" (0.9mm) Amps Volts WFS in/min (m/min)

Low 120 24 375 (9.5)

Optimum 150 25/26 460 (11.7)

High 180 28 550 (14.0)

0.045" (1.2mm) Amps Volts WFS in/min (m/min)

Low 135 23 200 (5.0)

Optimum 200 26 350 (8.9)

High 250 31 450 (11.4)

1/16" (1.6mm) Amps Volts WFS in/min (m/min)

Low 200 24/26 175 (4.5)

Optimum 250 26/28 250 (6.4)

High 300 28/30 325 (8.3)

Notes: s  MM ELECTRICALSTICKOUT s7HENUSING!RGON#ARBON$IOXIDEMIXTURES VOLTAGEMAYBEREDUCEDBYUPTOONEVOLTTO improve weldability and bead appearance.

International Customer Care: 940-381-1212 / www.stoody.com

FAX 940-483-8178

61


Stainless Steel Flux Cored Wires

Hardfacing & Specialty Alloy Welding Electrodes & Wires

309L T-1 AP StoodyÂŽ AP stainless steel wires are designed for welding in all positions with either 100% CO2 (X=1) or Argon/CO2 (X=4) gas mixtures. These wires exhibit a spray like arc transfer, easy slag removal and can be welded within a wide range of parameters. Stoody 309LT-1 AP wires can be used to join AISI 309 steels. It is also used to join AISI 304 to carbon and low alloy steels. AWS classification A5.22 E309LTI-X. Typical Deposit Chemistry: Carbon, Manganese, Silicon, Chromium, Nickel Typical Deposit Characteristics: 75 AR/25 CO2 Tensile Strength, Ksi (MPa) ............................. 88 (610) Elongation (%) ...................................................... 34 Yield Strength, Ksi (Mpa)................................. 69 (480)

100% CO2 86 (600) 38 64 (440)

Part Number 11953400 11819300 11819400

Packaging 25# WB 33# WB 33# WB

Wire Diameter in. mm 0.035 0.9 0.045 1.2 1/16 1.6

0.035" (0.9mm) Amps Volts WFS in/min (m/min)

1001 25 275 (6.9)

1201 26 374 (9.5)

1501 27 480 (12.2)

1701 27 600 (15.3)

0.045" (1.2mm) Amps Volts WFS in/min (m/min)

1301 24 227 (5.8)

1651 26 315 (8.7)

1901 26 445 (11.3)

2202 27 565 (14.4)

1/16" (1.6mm) Amps Volts WFS in/min (m/min)

1701 25 115 (3.9)

2101 26 195 (4.9)

2502 27 245 (6.2)

3002 28 320 (8.2)

Notes: 3/8" - 1/2" (10 - 12mm) Electrical stick-out. 2. Flat welding only

1. Flat and vertical welding

309L T-1 FH Stoody FH stainless steel , flux cored wires are designed for flat and horizontal welding applications, using either 100% CO2 (X=1) or Argon/CO2 (X=4) gas mixtures. These wires exhibit a spray like arc transfer with very low levels of spatter, a slag system that is essentially self-releasing, a smooth evenly ripped bead appearance, and deposition rates which are obtained at lower levels of heat input than competitive products. Stoody 309LT-1 FH wires can be used to join AISI 309 steels. It is also used to join AISI 304 to carbon and low alloy steels. AWS classification A5.22 E308LTO-X. Typical Deposit Chemistry: Carbon, Manganese, Silicon, Chromium, Nickel Typical Deposit Characteristics: 75 AR/25 CO2 Tensile Strength, Ksi (MPa) ............................. 84 (585) Elongation (%) ...................................................... 34 Yield Strength, Ksi (Mpa)................................. 61 (420)

100% CO2 83 (580) 33 61 (420)

Part Number 11703400 11869600 11869500

Packaging 25# WB, VP 33# WB, VP 33# WB, VP

Wire Diameter in. mm 0.035 0.9 0.045 1.2 1/16 1.6

0.035" (0.9mm) Amps Volts WFS in/min (m/min)

Low 120 24 375 (9.5)

Optimum 150 25/26 460 (11.7)

High 180 28 550 (14.0)

0.045" (1.2mm) Amps Volts WFS in/min (m/min)

Low 135 23 200 (5.0)

Optimum 200 26 350 (8.9)

High 250 31 450 (11.4)

1/16" (1.6mm) Amps Volts WFS in/min (m/min)

Low 200 24/26 175 (4.5)

Optimum 250 26/28 250 (6.4)

High 300 28/30 325 (8.3)

Notes: s  MM ELECTRICALSTICKOUT s7HENUSING!RGON#ARBON$IOXIDEMIXTURES VOLTAGEMAYBEREDUCEDBYUPTOONEVOLTTO improve weldability and bead appearance.

62

U.S. Customer Care: 800-426-1888 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


Hardfacing & Specialty Alloy Welding Electrodes & Wires

StoodyÂŽ AP stainless steel wires are designed for welding in all positions with either 100% CO2 (X=1) or Argon/CO2 (X=4) gas mixtures. These wires exhibit a spray like arc transfer, easy slag removal and can be welded within a wide range of parameters. Stoody 316LT-1 AP wires can be used to join AISI 316 and 316L commonly used in the rubber, chemical, petrochemical and dye industries. AWS classification A5.22 E308LTI-X. Typical Deposit Chemistry: Carbon, Manganese, Silicon, Chromium, Nickel, Molybdenum Typical Deposit Characteristics: 75 AR/25 CO2 Tensile Strength, Ksi (MPa) ............................. 88 (610) Elongation (%) ...................................................... 36 Yield Strength, Ksi (Mpa)................................. 66 (460)

100% CO2 86 (600) 39 62 (430)

Part Number 11953500 11819600 11819700

Packaging

Wire Diameter in. mm 0.035 0.9 0.045 1.2 1/16 1.6

25# WB 33# WB 33# WB

0.035" (0.9mm) Amps Volts WFS in/min (m/min)

1001 25 275 (6.9)

1201 26 374 (9.5)

1501 27 480 (12.2)

1701 27 600 (15.3)

0.045" (1.2mm) Amps Volts WFS in/min (m/min)

1301 24 227 (5.8)

1651 26 315 (8.7)

1901 26 445 (11.3)

2202 27 565 (14.4)

1/16" (1.6mm) Amps Volts WFS in/min (m/min)

1701 25 115 (3.9)

2101 26 195 (4.9)

2502 27 245 (6.2)

3002 28 320 (8.2)

Notes: 1/2" Electrical stick-out.

1. Flat and vertical welding

Stainless Steel Flux Cored Wires

316L T-1 AP

2. Flat welding only

316L T-1 FH Stoody FH stainless steel , flux cored wires are designed for flat and horizontal welding applications, using either 100% CO2 (X=1) or Argon/CO2 (X=4) gas mixtures. These wires exhibit a spray like arc transfer with very low levels of spatter, a slag system that is essentially self-releasing, a smooth evenly ripped bead appearance, and deposition rates which are obtained at lower levels of heat input than competitive products. Stoody 316LT-1 FH wires can be used to join AISI 316 and 316L commonly used in the rubber, chemical, petrochemical and dye industries. AWS classification A5.22 E316LTO-X. Typical Deposit Chemistry: Carbon, Manganese, Silicon, Chromium, Nickel, Molybdenum Typical Deposit Characteristics: 75 AR/25 CO2 Tensile Strength, Ksi (MPa) ............................. 88 (610) Elongation (%) ...................................................... 35 Yield Strength, Ksi (Mpa)................................. 65 (450)

100% CO2 82 (570) 36 60 (415)

Part Number 11703700 11869700 11869800

Packaging 25# WB, VP 33# WB, VP 33# WB, VP

Wire Diameter in. mm 0.035 0.9 0.045 1.2 1/16 1.6

0.035" (0.9mm) Amps Volts WFS in/min (m/min)

Low 120 24 375 (9.5)

Optimum 150 25/26 460 (11.7)

High 180 28 550 (14.0)

0.045" (1.2mm) Amps Volts WFS in/min (m/min)

Low 135 23 200 (5.0)

Optimum 200 26 350 (8.9)

High 250 31 450 (11.4)

1/16" (1.6mm) Amps Volts WFS in/min (m/min)

Low 200 24/26 175 (4.5)

Optimum 250 26/28 250 (6.4)

High 300 28/30 325 (8.3)

Notes: s  MM ELECTRICALSTICKOUT s7HENUSING!RGON#ARBON$IOXIDEMIXTURES VOLTAGEMAYBEREDUCEDBYUPTOONEVOLTTO improve weldability and bead appearance.

International Customer Care: 940-381-1212 / www.stoody.com

FAX 940-483-8178

63


Hardfacing & Specialty Alloy Welding Electrodes & Wires

Nickel Flux Cored Wires

Nickel Flux Cored Wires

STOODY ® 82-T1 Stoody 82-T1 is a gas shielded all position flux cored wire that meets the requirements of AWS A5.34, Class ENiCr3TX-Y. Applications: Joining Nickel-Chromium-Iron alloys, clad side of joints in steels clad with Nickel-Chromium-Iron weld metal, surfacing steel with Nickel-Chromium-Iron weld metal, joining Inconel 600, 601 and Incoloy 800 to themselves or to stainless and carbon steels Typical Deposit Chemistry: Carbon, Manganese, Silicon, Chromium, Iron, Niobium, Sulfer, Phosphorus, Nickel

Typical Deposit Characteristics: Tensile Strength .....................................89 ksi (614 Mpa) Yield Strength ........................................58 ksi (400 Mpa) Elongation. ................................................................26 % Part Packaging Number 11872700 33# WB

Wire Diameter Welding Parameters in. mm Shielding Gas Wire Ext. Amps Volts 0.045 1.2 75% AR-25% CO2 1/2 150-200 25-26 or 100%CO2

11872600 33# WB

1/16

1.6

75% AR-25% CO2 1/2 or 100%CO2

200-250

26-27

STOODY 182-T1 Stoody 182-T1 is a gas shielded all position flux cored wire that meets the requirements of AWS 5.34 ENiCrFe3TX-Y. Applications: Joining Nickel-Chromium-Iron alloys, clad side of joints in steels clad with Nickel-Chromium-Iron weld metal, surfacing steel with Nickel-Chromium-Iron weld metal, joining Alloys 600, 601 and Incoloy 800 to themselves or to stainless and carbon steels

Typical Deposit Characteristics: Tensile Strength .....................................94 ksi (649 Mpa) Yield Strength ........................................58 ksi (400 Mpa) Elongation. ................................................................35 % Part Packaging Number 11916200 33# WB

Wire Diameter Welding Parameters in. mm Shielding Gas Wire Ext. Amps Volts 0.045 1.2 75% AR-25% CO2 1/2 150-200 25-26 or 100%CO2

11916100 33# WB

1/16

Stoody A-T1 is a gas shielded all position flux cored wire that meets the requirements of AWS 5.34 ENiCrFe2TX-Y.

Part Number

Wire Diameter in. mm Shielding Gas

Applications: Joining Nickel-Chromium-Iron alloys, joining Nickel steels, joining Inconel 600, 601 and Icoloy 800 to themselves or to stainless and carbon steels

11896500 33# WB, LLW

0.045 1.2

75% AR-25% CO2 1/2 or 100%CO2

150-200

25-26

11896700 33# WB, LLW

1/16

75% AR-25% CO2 1/2 or 100%CO2

200-250

26-27

Typical Deposit Chemistry: Carbon, Manganese, Silicon, Chromium, Iron, Niobium, Sulfer, Phosphorus, Nickel

1.6

75% AR-25% CO2 1/2 or 100%CO2

200-250

26-27

STOODY A-T1

Typical Deposit Chemistry: Carbon, Manganese, Silicon, Chromium, Iron, Molybdenum, Niobium, Sulfer, Phosphorus, Nickel

Packaging

1.6

Welding Parameters Wire Ext. Amps Volts

Typical Deposit Characteristics: Tensile Strength ..................................89.5 ksi (595 Mpa) Yield Strength .....................................51.0 ksi (340 Mpa) Elongation. ................................................................45 % Charpy Impact Toughness. ............ 67 Ft.-lbs. (92 Joules) at -320°F (-196°C) Lateral Expansion............................... 46 mils (1.2mm) at -320°F (-196°C)

64

U.S. Customer Care: 800-426-1888 / Canada Customer Care: 905-827-4515 /

FAX 800-535-0557 FAX 800-588-1714


Hardfacing & Specialty Alloy Welding Electrodes & Wires

Stoody 625-T1 is a gas shielded all position flux cored wire that meet the requirements of AWS 5.34 ENiCrMo3TX-Y. Applications: Joining Nickel-Chromium-Molybdenum alloys, clad side of joints in steels clad with Nickel-Chromium-Molybdenum weld metal, surfacing steel with Nickel-Chromium-Molybdenum weld metal, joining steels to Nickel based alloys, joining 9% Nickel steel for cryogenic applications Typical Deposit Chemistry: Carbon, Manganese, Silicon, Chromium, Molybdenum, Iron*, Noibium, Sulfer, Phosphorus, Nickel *For Iron <1%, please request Stoody 625LI-T1 (PDS SP-029)

Typical Deposit Characteristics: Tensile Strength ...................................112 ksi (773 Mpa) Yield Strength ........................................72 ksi (497 Mpa) Elongation. ................................................................38 % Part Packaging Number 11872500 33# WB, LLW

Wire Diameter Welding Parameters in. mm Shielding Gas Wire Ext. Amps Volts 0.045 1.2 75% AR-25% CO2 1/2 150-200 25-26 or 100%CO2

11872400 33# WB, LLW

1/16

1.6

75% AR-25% CO2 1/2 or 100%CO2

200-250

Nickel Flux Cored Wires

STOODY 速 625-T1

26-27

STOODY C276-T1 Stoody C276-T1 is a gas shielded All Position Flux Cored Wire that meet the requirements of AWS 5.34 ENiCrMo4TX-Y. Applications: Joining Nickel-Chromium-Molybdenum alloys, clad side of joints in steels clad with Nickel-Chromium-Molybdenum weld metal, surfacing steel with Nickel-Chromium-Molybdenum weld metal, joining higher Molybdenum high Nitrogen containing stainless steels Typical Deposit Chemistry: Carbon, Manganese, Silicon, Chromium, Molybdenum, Iron, Tungsten, Sulfer, Phosphorus, Nickel

Typical Deposit Characteristics: Tensile Strength ...................................106 ksi (705 Mpa) Yield Strength ........................................68 ksi (452 Mpa) Elongation. ................................................................42 % Part Packaging Number 11953700 33# WB, LLW

Wire Diameter Welding Parameters in. mm Shielding Gas Wire Ext. Amps Volts 0.045 1.2 75% AR-25% CO2 1/2 150-200 25-26 or 100%CO2

33# WB, LLW

1/16

1.6

75% AR-25% CO2 1/2 or 100%CO2

Packaging

Wire Diameter in. mm Shielding Gas

200-250

26-27

STOODY 622-T1 Stoody 622-T1 is a gas shielded all position flux cored wire that meet the requirements of AWS 5.34 ENiCrMo10TX-Y.

Part Number

Applications: Joining Nickel-Chromium-Molybdenum alloys, clad side of joints in steels clad with Nickel-Chromium-Molybdenum weld metal, surfacing steel with Nickel-Chromium-Molybdenum weld metal, joining higher Molybdenum high Nitrogen containing stainless steels

11953800 33# WB, LLW 33# WB, LLW

Welding Parameters Wire Ext. Amps Volts

0.045 1.2

75% AR-25% CO2 1/2 or 100%CO2

150-200

25-26

1/16

75% AR-25% CO2 1/2 or 100%CO2

200-250

26-27

1.6

Typical Deposit Chemistry: Carbon, Manganese, Silicon, Chromium, Molybdenum, Iron, Tungsten, Sulfer, Phosphorus, Nickel Typical Deposit Characteristics: Tensile Strength ...................................103 ksi (685 Mpa) Yield Strength ........................................70 ksi (470 Mpa) Elongation. ................................................................27 %

International Customer Care: 940-381-1212 / www.stoody.com

FAX 940-483-8178

65


STATEMENT OF WARRANTY

(as of March 15, 2009)

LIMITED WARRANTY: THERMADYNE warrants that its products will be free of defects in workmanship or material. Should any failure to conform to this warranty appear within the time period applicable to the THERMADYNE products as stated below, THERMADYNE shall, upon written notification thereof and substantiation that the product has been stored, installed, operated, and maintained in accordance with THERMADYNE’s specifications, instructions, recommendations and recognized standard industry practice, and not been subject to misuse, repair, neglect, alteration, or accident, correct such defects by suitable repair or replacement, at THERMADYNE’s sole option, of any components or parts of the product determined by THERMADYNE to be defective. THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. LIMITATION OF LIABILITY: THERMADYNE shall not under any circumstances be liable for special, indirect or consequential damages, such as, but not limited to, damage or loss of purchased or replacement goods, business interruption or loss of profit, or claims of customers of distributor (hereinafter the “Purchaser”) for service interruption. The remedies of the Purchaser set forth herein are exclusive and the liability of THERMADYNE with respect to any contract, or anything done in connection therewith such as the performance or breach thereof, or from the manufacture, sale, delivery, resale, or use of any goods covered by or furnished by THERMADYNE whether arising out of contract, negligence, strict tort, or under any warranty, or otherwise, shall not, except as expressly provided herein, exceed the price of the goods upon which such liability is based. THIS WARRANTY BECOMES INVALID IF REPLACEMENT PARTS OR ACCESSORIES ARE USED WHICH MAY IMPAIR THE SAFETY OR PERFORMANCE OF ANY THERMADYNE PRODUCT. THIS WARRANTY IS INVALID IF THE PRODUCT IS SOLD BY NON-AUTHORIZED PERSONS. This warranty is effective for the time stated in the Warranty Schedule beginning on the date that the authorized distributor delivers the products to the Purchaser. Warranty repairs or replacement claims under this limited warranty must be submitted by an authorized THERMADYNE repair facility within thirty (30) days of the repair. No transportation costs of any kind will be paid under this warranty. Transportation charges to send products to an authorized warranty repair facility shall be the responsibility of the Purchaser. All returned goods shall be at the Purchaser’s risk and expense. This warranty supersedes all previous THERMADYNE warranties.

WARRANTY SCHEDULE The warranty is effective below for the time stated in the Warranty Schedule beginning on the date that the authorized distributor delivers the products to the purchaser. THERMADYNE reserves the right to request documented evidence of date of purchase. GAS WELDING AND CUTTING EQUIPMENT Victor® Professional Victor CutSkill® Victor FirePower® Victor Medical Victor VSP HP&I Brass Regulators/Manifolds HP&I Stainless Regulators/Manifolds HP&I Corrosive Gas Regulators/Manifolds Aluminum Cylinders Steel Cylinders Oxygen Conservers Cutting Machine Motors TurboTorch® Transformers Parts Used in Rental Applications

66

Parts / Labor 5 years / NA 2 years / NA 1 year / NA 6 years / NA 2 years / NA 2 years / NA 1 year / NA 90 days / NA 10 years / NA 1 year / NA 2 years / NA 1 year / NA 3 years / NA 5 years / NA 1 year from date sold by seller to authorized distributor

ARC ACCESSORIES, ARC GOUGING & SLICE EQUIPMENT TC and TCV Water Coolers TSC-96 Smoke Collector ESG-1, EPG-CR1, EPG-CR2 Control Boxes for Eliminator Spool & Pull Guns QRC-2000 Nozzle Cleaning Stations QRC-3000 Series Ultrasonic Cleaner Arcair® N6000 Eliminator® Spool and Pull Guns PullMaster™ MIG Guns & PullMaster™ Pull Guns Robotic Deflection Mounts QRM-100 Anti-Spatter Applicator All other products 30 days from date purchaser including but not limited to: s-)''UNSs!RC'OUGING%QUIPMENTs3LICE%QUIPMENT

Parts / Labor 1 year / NA 1 year / NA 1 year / NA 1 year / 1 year 2 years / 2 years 1 year / NA 90 days / NA 90 days / NA 90 days / NA 90 days / NA 30 days / NA

PLASMA CUTTING SYSTEMS CUTMASTER® TRUE Series PakMaster® XL PLUS PakMaster® 150XL CUTMASTER 1Series™ AirCut™ 15C Drag-Gun® Plus Drag-Gun PAK 200 Automated Plasma Torches Consoles, Control Equipment, Heat Exchangers and Accessory Equipment

Parts / Labor 4 years / 4 years 3 years / 1 year 2 years / 1 year 3 years / 3 years 1 year / 1 year 2 years / 1 year 1 year / 1 year 2 years / 1 year 2 years / 1 year 1 year / 1 year 1 year / 1 year


ENGINE DRIVEN WELDERS Scout®, Raider®, Explorer™ Original Main Power Stators and Inductors Original Main Power Rectifiers, Control P.C. Boards All Other Original Circuits and Components Including, but not Limited to, Relays, Switches, Contactors, Solenoids, Fans, Power Switch Semi-Conductors Engines and Associated Components are NOT Warranted by Thermal Arc®, Although Most are Warranted by the Engine Manufacturer. SEE THE ENGINE MANUFACTURERS’ WARRANTY FOR DETAILS. GMAW/FCAW (MIG) WELDING EQUIPMENT Fabricator® 140, 180, 190, 210, 251, 281; Fabstar® 4030; PowerMaster® 350, 350P, 500, 500P 320SP, 400SP, 500SP; Excel-Arc® 6045; Wire Feeders: Ultrafeed®, Porta-feed® Original Main Power Transformer and Inductor Original Main Power Rectifiers, Control P.C. Boards, Power Switch Semi-Conductors All Other Original Circuits and Components Including, but not Limited to, Relays, Switches, Contactors, Solenoids, Fans, Electric Motors GTAW (TIG) & MULTI-PROCESS INVERTER WELDING EQUIPMENT 160TS, 300TS, 400TS, 185AC/DC, 200AC/DC, 300AC/DC, 400GTSW, 400MST, 300MST, 400MSTP Original Main Power Magnetics Original Main Power Rectifiers, Control P.C. Boards, Power Switch Semi-Conductors All Other Original Circuits and Components Including, but not Limited to, Relays, Switches, Contactors, Solenoids, Fans, Electric Motors PLASMA WELDING EQUIPMENT Ultima® 150 Original Main Power Magnetics Original Main Power Rectifiers, Control P.C. Boards, Power Switch Semi-Conductors Welding Console, Weld Controller, Weld Timer All Other Original Circuits and Components Including, but not Limited to, Relays, Switches, Contactors, Solenoids, Fans, Electric Motors, Coolant Recirculators SMAW (Stick) WELDING EQUIPMENT Dragster™ 85; 95S Original Main Power Magnetics Original Main Power Rectifiers, Control P.C. Boards All Other Original Circuits and Components Including, but not Limited to, Relays, Switches, Contactors, Solenoids, Fans, Power Switch Semi-Conductors 160S, 300S, 400S Original Main Power Magnetics Original Main Power Rectifiers, Control P.C. Boards All Other Original Circuits and Components Including, but not Limited to, Relays, Switches, Contactors, Solenoids, Fans, Power Switch Semi-Conductors GENERAL ARC EQUIPMENT FirePower® MIG Welders Water Recirculators Plasma Welding Torches Gas Regulators (Supplied with Power Sources) MIG and TIG Torches (Supplied with Power Sources) Replacement Repair Parts MIG, TIG and Plasma Welding Torch Consumable Items

Parts / Labor 5 years / 3 years 3 years / 3 years 1 year / 1 year See the Engine Manufacturers’ Warranty for Details Parts / Labor

5 years / 3 years 3 years / 3 years 1 year / 1 year Parts / Labor

5 years / 3 years 3 years / 3 years 1 year / 1 year Parts / Labor 5 years / 3 years 3 years / 3 years 3 years / 3 years 1 year / 1 year Parts / Labor 1 year / 1 year 1 year / 1 year 1 year / 1 year

5 years / 3 years 3 years / 3 years 1 year / 1 year Parts / Labor 5-2-1 years / NA 1 year / 1 year 180 days / 180 days 180 days / NA 90 days / NA 90 days / NA NA / NA

67


U.S. Customer Care:

ARCAIR ÂŽ / STOODY ÂŽ / THERMAL ARC ÂŽ / THERMAL DYNAMICS ÂŽ / TWECO ÂŽ / VICTOR ÂŽ................... 800-426-1888 FIREPOWER ÂŽ ................. 800-858-4232 / FAX 800-535-0557 TDC AUTOMATION................... 866-279-2628 TURBOTORCH ÂŽ ............. 800-238-0282 / FAX 800-535-0557 VICTOR MEDICAL .................... 800-382-8187 VICTOR SPECIALTY PRODUCTS ................... 800-569-0547

/ / / /

FAX FAX FAX FAX

800-535-0557 800-535-0557 800-535-0557 800-535-0557

Canada Customer Care: 905-827-4515 / FAX 800-588-1714 U International Customer Care: 940-381-1212 / FAX 940-483-8178 CIGWELD Customer Care: 1300-654-674 / FAX 61-3-9474-7391 U www.thermadyne.com

A Global Cutting & Welding Market Leaderâ&#x201E;˘ W O R L D H E A D Q U A R T E R S       3 W I N G L E Y 2 I D G E 2 O A D 3 U I T E    s 3 T  , O U I S - I S S O U R I      5  3  ! 

THE AMERICAS Denton, TX USA U.S. Customer Care Ph: 1-800-426-1888 (tollfree) Fax: 1-800-535-0557 (tollfree) International Customer Care Ph: 1-940-381-1212 Fax: 1-940-483-8178

Form No. 67-2836 (7/01/10)

EUROPE

ASIA/PACIFIC

Miami, FL USA Sales Office, Latin America Ph: 1-954-727-8371 Fax: 1-954-727-8376

Chorley, United Kingdom Customer Care Ph: +44 1257-261755 Fax: +44 1257-224800

Cikarang, Indonesia Customer Care Ph: 6221-8990-6095 Fax: 6221-893-6067

Oakville, Ontario, Canada Canada Customer Care Ph: 1-905-827-4515 Fax: 1-800-588-1714 (tollfree)

Milan, Italy Customer Care Ph: +39 0236546801 Fax: +39 0236546840

Rawang, Malaysia Customer Care Ph: +603 6092-2988 Fax: +603 6092-1085

Š 2010 Thermadyne Industries, Inc.

Melbourne, Australia Australia Customer Care Ph: 1300-654-674 (tollfree) Ph: 61-3-9474-2988 Fax: 61-3-9474-7391 International Ph: 61-3-9474-7508 Fax: 61-3-9474-7488

www.thermadyne.com

Shanghai, China Sales Office Ph: +86 21-64072626 Fax: +86 21-64483032 Singapore Sales Office Ph: +65 6832-8066 Fax: +65 6763-5812

Printed in U.S.A.

CatalogoThermadyne  
CatalogoThermadyne  
Advertisement