SHIELDS MADE FOR ARDUINO NEW
>> KA01 HHH RGB SHIELD FOR ARDUINO® Control 3 dimmer channels (1 x RGB or 3 single channels) with Arduino UNO™ Also available as completely mounted module VMA01 • 2 A load via Vin or 6 A load via external power • 12 or 24 V external power supply • uses pin 3, 5, 6 PWM on an Arduino UNO™ board • dimensions: 68 x 53mm / 2.67 x 2.08"
>> KA02 HHH AUDIO SHIELD Record your voice via a built-in microphone or a line input. Also available as completely mounted module VMA02 • audio sample frequency: 8 kHz • uses pin 10 on an Arduino UNO™ board as a Chip Select • uses the ICSP pins on an Arduino as a serial connection to the shield to free up I/O pins • memory write up to 100.000 X • dimensions: 71 x 53mm / 2.79 x 2.08"'
>> KA03 HHHH MOTOR & POWER SHIELD Power shield that can drive: relays, solenoids, DC and stepper motors. Also available as completely mounted module VMA03. • 2.5 A (max.) output current (each channel) • 50 V (max.) external power supply input • used pins on an Arduino UNO board can be selected to accommodate for other stacked shields • dimensions: 68 x 53mm / 2.67 x 2.08"
>> KA04 HHHHH ETHERNET SHIELD Configure your Arduino as a simple web server or let it get data from the worldwide web. Also available as completely mounted module VMA04. • data rates up to 10 Mbps • integrated MAC controller • 8 kB Transmit / Receive Packet Dual Port Buffer • the MAC controller supports both Unicast, Multicast and Broadcast packets, has a programmable (up to 64-byte) pattern matching feature within a packet at user defined offset and programmable wake-up on multiple packet formats (Magic Packet, Unicast, Multicast, Broadcast, specific packet match or any packet) • uses pin 10 and 2 on an Arduino UNO™ board. It also uses the ICSP connector as a serial connection to the shield to free up I/O pins • dimensions: 68 x 53mm / 2.67 x 2.08"
>> KA05 HHH I/O SHIELD General purpose INPUT - OUTPUT shield for Arduino® Also available as completely mounted module VMA05. • 1 A (max.) load per output • 30 V max. per output • uses pin 8 to 13 as outputs, pin A0 to A5 as analog inputs, and pin 2 to 7 as digital inputs • dimensions: 68 x 53mm / 2.67 x 2.08"
>> KA06 HHHH LCD SHIELD Add an LCD to your projects and visualize measurements, parameters, data, messages, etc… • supplied with 20 character / 4 lines display with white backlight • contrast adjust trimmer • backlight on/off switch • reset button • 3 user configurable pushbuttons (3 digital inputs / 1 analog input) • dimensions: 68 x 53mm / 2.67 x 2.08"
>> KA12 ANALOG INPUT EXTENSION SHIELD >> KA07 HHHH RTC SHIELD Add a real time clock shield to your projects to ensure accurate and easy timekeeping. While the shield keeps track of time and date, the controller can focus on other tasks. • I2C interface • accuracy: 20ppm (depends on crystal) • power consumption: 1.5mA • with backup battery holder (500nA when running on battery) • dimensions: 68 x 53mm / 2.67 x 2.08"
>> KA08 HHHH I/O SHIELD General purpose INPUT - OUTPUT shield for Arduino Yún • inputs: - 6 analogue - 6 digital • outputs: 6 NO/NC relay outputs (1A/30VDC) • LED status indicators • power supply: 7-15VDC • dimensions: 80x54mm / 3.15 x 2.12"
The Arduino UNO™ is equipped with 6 analog inputs. Some projects call for more analog inputs, e.g. sensor- or robot projects. This shield only uses 4 I/O lines (3 digital, 1 analog) but adds a whopping 24 inputs, so in total you have 29 analog inputs at your disposal. • analog inputs: 0 - 5 VDC • uses pins: 5, 6, 7 and A0 on Arduino UNO™ board • dimensions: 54 x 66 mm (2.1" x 2.6")