Issuu on Google+

>> K8057 HHH 2-CHANNEL RF REMOTE RECEIVER WITH RANDOM CODE

18

>> K8059 HHHH 2-CHANNEL RF CODE-LOCK REMOTE TRANSMITTER • power supply: 12V battery V23GA / GP23GAC,... (not incl.) • 433MHz operation • open field range of up to 30m possible

• power supply: 9 to 12V AC or DC / 100mA max. • relay contacts NO / NC: 3A each • 433MHz operation • selectable timers per output: 0.5s, 5s, 30s, 1min, 5min, 15min, 30min and 60min • open field range of up to 30m at room temperature • onboard antenna or external antenna





>> K8056 HHHH 8-CHANNEL MULTIPURPOSE RELAY CARD

Optional 8 channel remote for various Velleman projects, different addresses and functions can be set. • operate up to 8 channels • 433MHz operation • LED function/mode indication • power supply: 3 AAA batteries

This relay card can be used in several ways: stand-alone card, addressed by switches or open collector outputs or remote-controlled through RS232. As an extra feature (add RX433), the card can be remote-controlled using our K8058 (VM118R) RF remote. • 8 high quality relay contacts: 5A/230Vac max. • relay outputs are transient suppressed using VDRs • LED confirmation on each relay contact • 8 drive inputs to use with open collectors or regular switches • RS232 input to drive the card with computer or terminal: baud rate: 2400, no parity, 8 data bits, 1 stop bit, high or low impedance selection (10K or 1K) • optional RF driving possibility using RX433N type module (not simultaneous with RS232) together with K8058 eight channel RF remote control • power output: unregulated 12Vdc / 200mA • power supply: 12Vac / 500mA (including 12V output) • diagnostic software downloadable from our site





>> K8058 HHH 8-CHANNEL RF REMOTE CONTROL TRANSMITTER

>> VM118R

>> VM118

PREASSEMBLED

>> K8050 HHH 15-CHANNEL INFRARED RECEIVER

>> K8049 HHH 15-CHANNEL IR TRANSMITTER

15 open collector contacts: max. 50V/50mA. LED indication for each output. Range up to 20m. 4 different modes: 15 independent outputs, 15 rotary outputs, 7 independent outputs & 8 rotary outputs and 7 rotary outputs & 8 rotary outputs (independent from each other).

• power supply: 3 x 1.5V AAA batteries • up to 15 channels can be operated • rubber keypad • LED function indication • compatible with most Velleman IR receiver kits

• power supply: 8 ~ 14VDC or 2x6 ~ 2x12VAC (150mA) • current consumption: - all outputs off: 10mA - all outputs on: 150mA



 >> VM122

PREASSEMBLED

>> K8023 HHH 10-CHANNEL, 2-WIRE REMOTE CONTROL This kit allows you to control up to 10 devices using only 2 wires at a long distance. Microprocessor controlled. Inputs can be push-buttons, switches or open collector outputs from another device. The receiver section provides 10 open collector outputs that allow you to control relays directly. Terminal block connectors for all input and output connections are included. All outputs are provided with LED indication. Can be used with our kits : K8000, K8006,... Can be connected to our standard relay card : K6714-16. • 10 open collector outputs: 50V / 100mA • tested to a distance of up to 50m (55 yards) between control- and receiver section • operating voltage: single 12-15V AC or DC, 300mA

 PREASSEMBLED

>> VM121

PREASSEMBLED


Velleman Projects Catalogue - EN