Page 1

Encoders Dynapar ™ b r a n d

NEMA C Face Adapters • “Flower pot” style adapter kit • Provides spacer, coupling and all necessary hardware • 5/8" I.D. coupling for 56C motor shafts with extensions from 1.1" to 1.8" long Shown with encoder mounted (not included)

APPLICATION/INDUSTRY Mounts a Size 25 flange mount encoder to a 4-1/2" NEMA C motor or accessory flange

SPECIFICATIONS DIMENSIONS

DESCRIPTION Kits for 2.5" Encoders compatible with Series H42, H25 and HA725 encoders (flange mount, 3/8" shaft).

Customer Motor Mounting Surface 1.71 Alternate Connector Location

Customer Motor

1.5 Max.

2.50 (Cover)

I N C R E M E N T A L

A C C E S S O R I E S

Motor Shaft Length: 1.24" to 1.94" 1.100 to 1.800 2.50

+.010 3.180 6.640 Max.

Compatible Encoders The adapter may be used with the listed series encoders having the specified mounting configurations. Encoder Series

Mounting Configuration

H42 H25 HA725

2.5" Flange 2.5" Flange 2.5" Flange

Ordering Information

2. 134

Model No.

Description

FPA1

NEMA C Face Adapter, 5/8" Motor Shaft

FPA2 FPA3

NEMA C Face Adapter, 7/8" Motor Shaft NEMA C Face Adapter, 1" Motor Shaft


Encoders INSTALLATION

1) Remove (4) black plugs from adaptor (if installed). 2) Mount encoder to adaptor using (4) #10-32 x 1/2" screws and lock washers provided. 3) Check motor shaft length and cut as required. Shaft should extend 1.240" to 1.940 from motor mounting surface. 4) A suitable flex coupling is provided. Loosen setscrews or clamps at coupling ends. Slide coupling onto encoder shaft. a) FPA1: Approximately 9/16" from end of shaft. b) FPA2/FPA3: 3/8" from adapter mounting surface. Tighten coupling setscrew or clamp at encoder shaft. 5) Mount adapter/encoder assembly to motor using #3/8-16 x 1" bolts and lock washers provided. Tighten coupling setscrew or clamp at motor shaft. 6) Reinstall (4) black plugs removed in step 1.

Customer Motor Mounting Surface 1.71 Alternate Connector Location

Customer Motor

1.5 Max.

2.50 (Cover)

I N C R E M E N T A L

A C C E S S O R I E S

Motor Shaft Length: 1.24" 1.100to to 1.94" 1.800 2.50

+.010 3.180 6.640 Max.

2. 135

http://www.veederline.com.au/mmedia/encoders/NEMA%20C%20Face%20Adapters  

http://www.veederline.com.au/mmedia/encoders/NEMA%20C%20Face%20Adapters.pdf

Read more
Read more
Similar to
Popular now
Just for you