Page 1

IEL-HS PART NO. C-1635

0.25 .26 DIA 1.18

3 FT LEADS BOTH ENDS

3.00

.375-1.000

D

1.50

10-32 SET SCREW 4 EQUALLY SPACED TYP. BOTH ENDS

.50

A

.50

Sample Applications Include:

STANDARD SPECIFICATIONS Operating Current Operating Voltage Electrical Noise Leakage Resistance Temperature Range Encasement Rotor Shaft Ring Material Brush Springs Brush Contacts Brush Blocks Insulation Sealing Leads

7.5 amps per ring 1,000 VRMS 5m V, P-P, BW = 10Hz - 10kHz at 8.5 mA, 500 rpm 10,000 MW (min) -30째F to 175째F Anodized aluminum Passivated 316 stainless steel Solid coin silver Beryllium copper Two 80% silver - 20% graphite contacts per ring Delrin Teflon and delrin Splash proof construction 20 AWG TFE covered wire, 3 ft long

OPTIONS Up to 20 amps per ring Current Up to 2,000 VDC Voltage DC to 250 MHz Bandwidth Up to 390째F Temperature ! Flange for cantilever mounting ! Stainless steel encasement parts ! Extended shaft with or without threads ! Longer leads than the standard 3 ft length ! Coax, twisted shielded pair or thermocouple leads

! Signal Transfer ! Stress & Torque Readings ! Temperature Control The IEL-HS model is designed to fit over a .375 to 1.00 inch diameter shaft. The IEL-HS can also be mounted on the end of the shaft utilizing an optional mounting flange manufactured to customer specifications. It can be modified to accept fluid or air swivel. The optional stainless steel encasement makes it suitable to operate in a salt air environment. This assembly can be modified to rotate up to 3,000 rpm for short periods of time. Please consult our staff for information concerning rotational speeds.

RINGS

PART NO

MODEL

A

2 4 6 8 10 12 14 16 18

C-1635-*-02 C-1635-*-04 C-1635-*-06 C-1635-*-08 C-1635-*-10 C-1635-*-12 C-1635-*-14 C-1635-*-16 C-1635-*-18

IEL-HS-*-02 IEL-HS-*-04 IEL-HS-*-06 IEL-HS-*-08 IEL-HS-*-10 IEL-HS-*-12 IEL-HS-*-14 IEL-HS-*-16 IEL-HS-*-18

2.25 2.75 3.25 3.75 4.25 4.75 5.25 5.75 6.25

* To complete part and model number, please insert your desired bore diameter. Example: C-1635-750-08=.750 bore diameter with 8 rings

NOTE: Dimensions shown are intended, except manufacturing tolerances will apply.

IEC Corporation-IEL-HS  

Model: IEL-HS: Signal Transfer ! Stress & Torque Readings ! Temperature Control OPTIONS ! Extended shaft with or without threads ! Longe...

Read more
Read more
Similar to
Popular now
Just for you