Model RT1000 – 000 Electronic Hubodometer
One Model For Any Tire Ever Made... Or Ever Will Be Made! Digital-Data Accurate
The Rite-Trak gives you all of the benefits that matter... Here are just a few: Drop your Inventory • Replace your bloated inventory with just one standard unit to handle all of your tire sizes. • Digital electronic circuitry allows rapid and easy configuration anywhere, without need for a specialized programming instrument. You can count on its single, standard model for a perfect match to virtually any tire size.
Error Free Display Secure, Reliable Operation • Large, high-contrast display always • 5-Year Warranty – no mileage remains in upright position providing limitation. easy, reliable and highly accurate • Security features include serial data collection. number viewing via the display as well as tamperproof setup scheme. Extended Record Keeping • Separate Trip and Lifetime totals • Only one moving part for increased permit specialized record keeping reliability. methods. ew N • “Fuse” lockout feature. Changes to • Rite-Trak’s setup features include the unit’s set-up can be perminatly capturing distance data as miles or disabled to prevent tampering. kilometers. ew N • May be preset to any starting value.
Display: LCD, 7 digits, 0.45” high (11.43mm) Housing: Zinc, diecast Programming: Simple procedure using only the tool included with the hubodometer
To determine the number of revolutions per mile/kilometer use the tables beginning on page 6. The number of revolutions in the table are approximations and may contain a small percentage of error. Please refer to your tire manufacturer’s data sheet or website. If your tire is not listed and data is not available, you may use the formula on page 79 to calculate the revolutions per mile/kilometer.
HUBODOMETER MOUNTING HUBCAPS
Bolt Circle (in.)
No. of Bolts
Dim. A (in.)
Dim. B (in.)
Dim. C (in.)
Dim. D (in.)
Hubcap and Gasket Kit Part No.
325886-250 (Grease Cap)
Threaded 6-14 x 8
Threaded 6-14 x 8
325886-251 (Grease Cap)
HUBODOMETER MOUNTING BRACKETS Bolt Circle Dia. (in.)
Stud Size (in.)
Universal Bracket 7
Part No. 325614-101
Over Hubcap Bracket 5-1/2 x 3-1/2
1/2 (0.500) - 20 UNF-2A Thread 11.1mm (0.438") Minimum Full Thread
.6mm .025" 44.2mm 1.740" 13.5mm 0.531
Locknut - 19mm (0.750") Across Flats 8mm (0.312") Thick Plain Washer 32.8mm (1.25") Outside Diameter 1.4mm (0.055") Thick
HUBODOMETER INSTALLATION INSTRUCTIONS A. MOUNTING. Hubodimeters can be mounter on a VeederRoot bracket or hub cap. Concentricity of the hubodometer to axel must be within 0.062” (1.6mm). B. INSTALLATION. Install the hubodometer as follows:
NOTE. To calculate the number of revolutions per mile of your tire. 1.
Measure the distance from the center of the hub to the ground.
Insert the hubodometer mounting stud into the mounting hole.
Double that number (X2) and then multiply the result by 3.1416. Divide this result by 12
Install the washer over the stud and secure with the lock nut.
Torque the nut to 18 to 22 lb-ft. (24 to 30 N-m) maximum.
Divide the number 5280 by the result from step #2 (5280 ÷ #2 result). This will provide the number of revolutions your tire will make per mile.
If installation is on a Veeder-Root bracket, install bracket per provided instructions.
For revolutions per kilometer miltiply calculated revolutions per mile by 0.621.
Refer to instructions provided with hubodometer for additional procedures.
Consult Veeder-Root regarding any unusual application, installation, or possible modification of this basic design.
C. CLEANING. Use a mild detergent and water to clean the hubodometer’s crystal front.
Hubodometers - Rite Trak Electronic Programmable. Specifications Display: LCD, 7 digits, 0.45” high (11.43mm) Housing: Zinc, diecast Program...