Page 1

SCHOOL OF CONTINUING EDUCATION

Fall 2017

ENGINEERING

WHAT’S INSIDE

Professional Development Courses and Certificates

Business Process Improvement • Elastomer Technology • Electrical Engineering • Facility Management Food Safety • Industrial/Mechanical • Plastics Technology • Supply Chain Management • Water Technology


WELCOME TO THE UWM SCHOOL OF CONTINUING EDUCATION ENGINEERING PROGRAMS Your Trusted Advisors

Table of Contents

Have questions about what courses to take? Looking to maximize the amount of PDHs you can earn? Murali and Marcia are here to help! Call or email them with any questions, they are more than happy to assist. MURALI VEDULA Program Director mvedula@uwm.edu 414-227-3121 MARCIA GABRIEL Program Manager gabrielm@uwm.edu 414-227-3378

General Information...............................................................2-3 Courses...................................................................................4-12 Elastomers Technology....................................................... 4 Plastic Technology...........................................................5-6 Electrical Engineering ........................................................ 7 Everyday Engineering......................................................... 7 Facility Management........................................................... 8 Food and Beverage............................................................. 9 Industrial / Mechcanical.................................................. 10 Business Process Improvement .................................... 11 Supply Chain Management.............................................. 12 Water Technology.............................................................. 12 Certificates................................................................................ 13 Registration Information......................................................... 15

School of Continuing Education (SCE) is the largest provider of noncredit continuing education in Southeastern Wisconsin, with over 15,000 participants, more than 1,000 programs and 600 practitioner instructors. Our state-of-the-art classrooms and conference services are located in downtown Milwaukee – the heart of the city’s business and commercial district. SCE is one of 14 schools and colleges at the University of Wisconsin-Milwaukee, which is recognized as one of the nation’s 115 top research universities.

Why Choose SCE

Engineering Certificate Programs

A professional certificate from the School of Continuing Education comes with the distinction and quality that the University of Wisconsin-Milwaukee has to offer. UWM is Wisconsin’s premier public, urban university with a strong international reputation for excellence in education.

All 12 programs are made up of courses that qualify for continuing education professional development hours (PDHs). All courses are taught by instructors that keep your attention, keep pace with the changing industry and keep you competitive.

• Local and national industry experts with real-world knowledge and advice

• Dimensioning and Tolerancing

• Six Sigma Black Belt for Services and Transactions

• Opportunity to network with like-minded professionals

• Elastomer Technology

• Convenient downtown location

• Electrical Engineering

• Six Sigma Black Belt Training

• Amenities, including course materials, meals and discounted parking

• Facility Management • Food Safety • Gear Technology

Earn Your PDHs Here

• Office Lean

Maintaining your PE license is just one reason to earn Professional Development Hours (PDHs). Take classes to stay on top of industry trends and developments, network with professionals in your field and add value to your organization. All of our courses qualify for PDHs, and all are taught by expert instructors. So get started today!

2

• Plastics Technology

University of Wisconsin-Milwaukee School of Continuing Education

• Six Sigma Green Belt for Services and Transactions • Water Technology


Practitioners Who Practice What They Teach! UWM’s engineering instructors have many combined decades of real-world experience. They are professional engineers, consultants, business owners, executives, civil servants, professors and designers and managers of multi-million dollar projects. At UWM, they teach what has made them highly successful for years in their own fields. Because your fellow participants and instructors are professionals in various fields of engineering, a UWM Engineering certificate is the ideal place to meet and learn from your peers. Each course is led by practitioner instructors who have the real-world experience to ensure your real-life success. They are teachers, innovators and most importantly they are engineers who understand the field. SCE engineering instructors are proud to have earned the trust of the engineering community – and are eager to hear about your professional development goals.

FLEXIBLE FORMATS

Online Courses

Face-to-Face

PDHs

Take this course online from any internet connection

Courses are taught in the classroom

Professional Development Hours

WiSE

Breakfast Series Membership The Women in Science & Engineering (WiSE) breakfast series serves a nutritious helping of insight, networking and value the first Thursday of every month. Each session examines unique challenges and opportunities for women in these traditionally male-dominated fields. Membership includes unlimited access to the events all year long. Membership Fee: $60, Student Membership Fee: $20 Non-Member Fee: $20 per session For more information visit uwm.edu/sce-WiSE or contact Marcia Gabriel at 414-227-3378 or gabrielm@uwm.edu.

For more information uwm.edu/sce-eng

800-222-3623

3


ELASTOMER TECHNOLOGY Elastomer technology is permeating nearly every industry today. From efficient mold design to compounding to extrusion, our comprehensive courses cover essential topics to help you maximize your knowledge productivity and marketable skills.

All of the elastomer technology courses can be used towards an Elastomer Technology Certificate if you attend nine or more days of rubber-related courses in as little as 18 months.

Rubber Compounding and Mixing for Performance Start with the basics of formulating, the key processability characteristics, and the most common factory problems and causes, then go further in-depth in this three-day, intensive overview of rubber compounding and mixing. Learning Outcomes

Detail critical information on the basics of GD&T. From there, dive into the more difficult principles through lectures, realistic examples, discussions and application problems. Understand how to interpret and apply ASME Y14.5M-2009.

Learning Outcomes • Gain an integrated perspective on rubber molding and design of rubber molds • Understand current principles and techniques in the design of molds and molded part design

Rubber Extrusion Technology Learn applicable basic information on all aspects of the rubber extrusion process. Build a knowledge base that encompasses products ranging from intricate profile extrusions to tires, using compositions ranging from a single thermoplastic elastomer to multiple dense and cellular compounds coextruded with carriers and reinforcements Learning Outcomes • Understand compound ingredients, characterization and processing • Become familiar with equipment for pumping, shaping, curing and monitoring • Learn various methods related to process variation and control

• Know the five categories of rubber processability tests • Understand the differences between general purpose and specialty elastomers, and how they affect compounding and mixing

4

Learn the fundamentals of molding rubber mechanical goods and designing their rubber molds, with no reference to the molding of tires. Review applicable molding methods with emphasis on compression, transfer and injection processes. Bring drawings or troublesome parts to address real-world issues during class.

4830-10043 M-W, Sept 25-27 8am-5pm, ends at 3pm on day 3 $1,390 Terry Chapin, Van Walworth 1.8 CEUs, 18 PDHs

Make an impact on your elastomeric applications with new knowledge, costsaving strategies, stronger designs and impressed clients.

4830-10028 W-F, Sept 20-22 8am-4:30pm, ends at 3pm on day 3 $1,390 John Dick, Peter Surette, Sr. 1.8 CEUs, 18 PDHs

Geometric Dimensioning & Tolerancing

• Explore useful design information – valuable for beginners and seasoned practitioners

Elastomer Technology Certificate

• Review methodologies for solving factory problems

Molding of Rubber and Design of Rubber Molds

4830-10355 M-W, Oct 16-18, 8am-4:30pm $1,490, $1,390 if registered by Aug 16 James Stevenson, John Dick 2 CEUs, 20 PDHs

Learn and apply these techniques in datum selection and tolerancing optimization. This approach preserves functional product requirements, while taking into consideration manufacturing difficulties, introducing more producible tolerances, practical datum structures and pre-planning measurement methods. Learning Outcomes • Interpret and apply the latest standards – ASME Y14.5-2009 • Reduce drawing changes and interpretation errors while designing for maximum profitability • Bid contracts with confidence 4810-10151 M-W, Oct 9-11 8am-4:30pm, ends at noon on day 3 $1,390, $1,290 if registered by Aug 9 James Meadows 1.7 CEUs, 17 PDHs

Silicone Elastomers Technology and Fabrication Receive a comprehensive overview of silicone elastomers, including basic silicone chemistry, types of silicone elastomers, manufacturing processes, fabrication techniques, problem-solving and application areas. With an emphasis on liquid injection molding, learn from a panel of experts in the silicones field, and discuss specific projects of interest. Learning Outcomes • Visit M.R. Mold & Engineering Corp. to experience the production of an actual liquid silicone rubber part • Observe pump design and operation, machine setup and operation, flow analysis, and more • Understand material selection, dispensing methods, injection molding process, tool design and bonding alternatives 4830-10332 M-Th, Feb 12-15, 2018, 8am-4:30pm $1,490, $1,290 if registered by Dec 12 Embassy Suites Anaheim / Orange, CA John Timmerman, Bob Pelletier, Rick Finnie, Mel Toub, Craig Lustek, Stefan Scheibner 2.4 CEUs, 24 PDHs

University of Wisconsin-Milwaukee School of Continuing Education


The Extrusion Complex

PLASTICS TECHNOLOGY The growth of the plastics industry has shown no signs of decreasing in the first two decades of the 21st century. Advances in plastics technology and its lighter weight have increased the share of plastic parts in automotive, construction, and the medical industry. Plastics Engineering is more complex than ever and to answer increased demands, you must be at the forefront of innovation and efficiency.

Plastics Technology Certificate

Plastics Extrusion manufacturing produces pipes, tubing, weather-stripping, fencing, window frames, and a myriad of other shapes of continuous profile. Several factors can influence this high-volume manufacturing process. Get an overview about all the interconnected factors that go into extrusion of quality plastics products. • Overview of various factors that can influence plastics extruded products

Quality Plastics Extrusion requires a detailed understanding of sizing and calibration using a scientific approach. You will learn how to troubleshoot the extrusion process and determine best practices to communicate to the manufacturing floor. You will be able to recommend process setting based upon real world industry case studies.

• Learn about the extruder and related equipment

Learning Outcomes

• Understand the role of the choice of plastic for a given application

• Learn how to troubleshoot the extrusion process

Learning Outcomes

4830-10337 T, Sept 19, 8am-4:30pm $390 Daniel Cykana 0.7 CEUs, 7 PDHs

Plastics Extrusion Profile Die Design & Advanced Processing

As in most disciplines, cost savings play an important role in plastics engineering – position yourself to be a valuable and economical asset to your organization. Individual courses may be taken without pursuit of the certificate. In addition, any one of the tolerancing courses may be applied toward this certificate. Earn the certificate by completing nine or more days of related courses in as little as 18 months (not to exceed three years).

Strictly Snap-Fits: Developing World-Class Snap-Fit Attachments Develop a deep understanding of snap-fit attachments and gain the knowledge to develop snap-fit applications optimized for reliability, manufacturing, assembly and customer usage. With real-life observations, sample parts and a copy of the instructor’s book, The First Snap-Fit Handbook, you can have the tools to master the snap-fit technology fundamentals.

Sizing and Calibration of Profiles and Troubleshooting the Extrusion Process

The Profile Die for Plastics Extrusion needs a proactive approach to design. The shape of a continuously extruded product may not be consistent because of the change of shape of the plastic due to temperature and physical constraints along the manufacturing line. Learn about how to carefully design the profile die so that you can predict the final shape with certainty. You can gain an understanding of important factors such as drawdown and land length ratios. Gain a better understanding of practical and advanced methods for quality processing of extruded products. Learning Outcomes • Understand the role of the profile die design for plastics extrusion products • Learn about the effect of variation of temperature and constraints on final shape • Understand various geometric design features of dies for extrusion

• Best practices to communicate with the manufacturing floor • Gain the ability to recommend process settings in the real world 4830-10339 F, Sept 22, 8am-4:30pm $390 Daniel Cykana 0.7 CEUs, 7 PDHs

Plastic Injection Mold Design Basics Get a practical and comprehensive look at injection mold design and learn to contribute to the overall success of projects. Receive a unique blend of very detailed mold design concepts set forth in the context of the whole design process, and on the final day, participate in that process. Learning Outcomes • Understand mold design concepts • Avoid costly mistakes • Specify and evaluate your purchases of molds 4830-10023 M-W, Oct 2-4, 8am-4:30pm $1,390, $1,290 if registered by Aug 2 John Vosmeier 2 CEUs, 20 PDHs

4830-10338 W-Th, Sept 20-21, 8am-4:30pm $890 Daniel Cykana 1.4 CEUs, 14 PDHs

Learning Outcomes • Understand how a snap-fit attachment functions as a complex system of features • Recognize and avoid many common snap-fit mistakes • Know the minimum design requirements for a successful snap-fit attachment 4830-10021 M-T, Sept 18-19, 8am-4:30pm $1,190 Paul Bonenberger 1.4 CEUs, 14 PDHs For more information uwm.edu/sce-eng

800-222-3623

5


Plastic Injection Mold Design Advanced

Plastic Part Failure: Analysis, Design & Prevention

FDA & ISO Requirements for Medical Devices

Take your understanding of the inner workings of injection molds to the next level. With a focus on cost savings throughout, work on “miniprojects” at each important juncture in order to master advanced concepts. • Understand advanced parting line, shut-off development, advanced slide and lifter design

Dive into a broad range of topics essential to understanding and preventing plastic failure. The most efficient and effective approach to plastic component failure is performing a systematic failure analysis following scientific method. Someone once said, “if you don’t know how something broke, you can’t fix it,” highlighting the importance of a thorough understanding of how and why a product has failed.

Medical device design engineers, manufacturing engineers, and quality engineers will gain a valuable understanding of FDA requirements, which will be compared to ISO requirements. Understand the need for regulations for medical devices and gain valuable insights to make your products compliant and fail safe.

• Learn to do advanced cavity and core inserting

Learning Outcomes

Learning Outcomes

• Analyze your current issues regarding the subject matter

• Learn the essentials of why plastic components fail

4830-10024 Th-F, Oct 5-6, 8am-4:30pm $1,190, $1,090 if registered by Aug 5 John Vosmeier 1.4 CEUs, 14 PDHs

• Understand the five factors affecting plastic part performance • Learn the process of conducting a failure investigation

Designing Plastic Parts for the Injection Molding Process Get a fundamental overview of plastic part design for the process of injection molding – ideal for engineers and designers who are accustomed to working with metals, but faced with metalto-plastic concerns. Examine plastic materials, behavior and selection, engineering design, manufacturing considerations and assembly methods. Learning Outcomes • Learn how to select an appropriate plastic material formulation • Discover how to work within the manufacturing limitations associated with the injection molding process • Understand how to approach plastic product development and establish end use requirements 4830-10333 M-T, Oct 9-10, 8am-4:30pm $1,090, $990 if registered by Aug 9 Robert Malloy 1.4 CEUs, 14 PDHs

4830-9922 M-W, Oct 16-18 8am-4:30pm, ends at 3pm on day 3 $1,290, $1,190 if registered by Aug 16 Erik Foltz, Javier Cruz, Antoine Rios, Jeffrey Jansen 2 CEUs, 20 PDHs

Medical Plastics – Basics The use of plastics in the manufacture of a medical device requires many more considerations than the usual engineering requirements and capabilities. Learn about the basics of the material requirements and manufacturing conditions that apply to medical devices. Review the FDA’s different classifications of medical devices and the different types of construction materials used. Learning Outcomes • Review the FDA’s classification of medical devices • Learn about the different types of materials of construction

• Understand the FDA requirements and how they compare with ISO requirements • Learn what guidance documents are and why they matter • Explore why regulations are necessary 4830-10027 W, Oct 18, 8am-4:30pm $395, $295 if registered by Aug 18 Terry Layton, Ph.D. 0.7 CEUs, 7 PDHs

Medical Plastics – Advanced Gain valuable insights into the role of micromolders and custom manufacturers and study proven best practices to avoid recalls due to regulatory compliance issues. Learn about pitfalls in the product and process development process and how to avoid them. Learning Outcomes • Understand best practices for processing of plastics for medical devices • Discuss testing of raw materials and role of antimicrobials • Evaluate the role of micro-molders and custom manufacturers 4830-10026 Th-F, Oct 19-20, 8am-4:30pm $1,090, $990 if registered by Aug 19 Len Czuba 1.4 CEUs, 14 PDHs

• Understand the role of compliance in the product development process 4830-10022 M-T, Oct 16-17, 8am-4:30pm $1,090, $990 if registered by Aug 16 Len Czuba 2 CEUs, 20 PDHs

“ 6

Learning Outcomes

I’m passionate about plastics because they can be simple or they can be complex. And I like the challenge of figuring out a way to make a plastic part meet the needs of my customer. – NATALIE GAMEZ, PRODUCT ENGINEER, STRATTEC SECURITY CORPORATION

University of Wisconsin-Milwaukee School of Continuing Education


Understanding Power System Design & Operation

ELECTRICAL You will gain the knowledge to maximize productivity, efficiency and innovation in Electrical Engineering. You’ll use your new skills to make an immediate impact at your job. How do we know? Because our instructors use them, too, and have used them successfully for many years.

Electrical Engineering Certificate

Learn to communicate effectively with electrical engineers and system designers. This user-friendly course is geared toward managers, project coordinators, engineers, designers, technicians and other individuals who have little or no formal training in electrical power system design and operation. Learning Outcomes • Understand key electrical parameters and fundamental operation of power systems • Foresee localized interruptions, widespread outages and regional blackouts • Examine case studies that include a list of modifications designed to minimize outages

The demand for engineering professionals versed in power components, structural and electrical design considerations, quality and safety is on the rise. Maximize your productivity, efficiency and innovation. Earn the certificate by attending nine or more days of related courses in as little as 18 months.

Electrical Substation Design Fundamentals Study substation design subjects at a level appropriate for those relatively new to the field. Get an introduction to technical requirements, configuration philosophies, design practices, information sources and work processes. Learn the fundamentals of electrical, civil and structural design issues of electric power substations.

4840-10076 T-Th, Oct 10-12, 8am-4:30pm $1,395, $1,295 if registered by Aug 10 Anthony Sleva, P.E. 2 CEUs, 20 PDHs

Protective Relaying Principles & Applications Learn the fundamental concepts of protective relaying starting with basic and advanced to important setting considerations, and eventually ending with a discussion of fault and disturbance analysis. Gain confidence in your ability to recognize key protective relaying considerations for distribution lines, transmission lines, substations, transformers, buses and circuit breakers. Learning Outcomes • Know criteria used to select protective relay settings

Learning Outcomes

• Understand key design considerations and operations

• Understand substation project chronology and how to develop the scope and identify the constraints for the overall project

• Examine case studies that include examples of correct and incorrect operation of protective relaying schemes

• Be familiar with costs and schedules

4840-10101 T-Th, Oct 24-26, 8am-4:30pm $1,395, $1,295 if registered by Aug 24 Anthony Sleva, P.E. 2 CEUs, 20 PDHs

• Explore site grading design, foundations, insulation and insulation protection and structures

EVERYDAY ENGINEERING Engineering Ethics ONLINE Gain an understanding of the Model Rules of Professional Conduct for engineers, including your obligations to society, your employer and clients, and other licensees in this online, interactive course. Instructor-led content meets the minimum requirement in the area of professional conduct and ethics and satisfies your biennial registration period requirement per Chapter A-E 13. Learning Outcomes • Know the ethical priorities and the obligations that engineers have according to NCEES • Understand the six ethical types, and why ethical lapses occur • Identify five common ethical dilemmas that occur in engineering Sessions begin the first Mon of every month $99 Barbara Bartlein, RN, LCSW 2 PDHs

SCHOOL OF CONTINUING EDUCATION

LEARN A LANGUAGE CONNECT. UNDERSTAND. SHARE. GROW.

4840-10100 W-F, Sept 27-29, 8am-5pm $1,395 Dan Chaply 2.1 CEUs, 21 PDHs

Let’s Talk! | uwm.edu/sce-languages 414-227-3118 | languages@uwm.edu

For more information uwm.edu/sce-eng

800-222-3623

7


FACILITY MANAGEMENT Facilities are typically a company’s second-largest asset, right after its employees. A well-designed, wellmanaged facility can help employees be more productive. When people are able to do their best work, they are more fulfilled and happier. This can help a company retain its best employees and attract new ones. Thus, a well-managed facility can have a positive impact on a company’s bottom line.

Beyond Facility Management Service Delivery

Facility Management Administration and Sustainability

Learn about aspects of facility management beyond the delivery of basic services such as operations and maintenance. We discuss issues relating to the health, safety and protection of a company’s people and buildings; the technologies that facility managers use to manage their services and buildings; and the important aspect of providing a well-designed workplace for an organization’s employees.

For many building occupants, facility management has mostly to do with hands-on maintenance and repair. A burned-out light bulb is reported and a maintenance representative replaces it. An occupant reports that the building is too warm and a maintenance technician appears to adjust the HVAC. But there is another side of facility management that most occupants don’t see – the administrative side. Learn about how facility managers deal with design and construction, contracts and relocation planning.

Learning Outcomes • Learn about the technologies used to manage buildings • Understand the importance of, and the means to keep a company’s employees safe • Provide and manage a well-designed workplace 4820-9933 T-W, Oct 10-11, 8am-4:30pm $595 Mark Sekula, FMP, CFM, LEED-AP, IFMA Fellow, Cornel Rosario 1.4 CEUs, 14 PDHs

Facility Management Certificate Facility management is a profession that encompasses multiple disciplines to ensure functionality of the built environment by integrating people, place, process and technology. Your Facility Management Certificate involves multiple disciplines to ensure functionality by integrating people, place, process and technology. You can earn a Facility Management Certificate by attending 9 or more days of related courses in as little as 18 months (not to exceed three years).

Practices in Leadership and Strategy Develop strategies to successfully carry out major initiatives by influencing the decisions and attitudes of others. Examine the concepts of leadership and strategy through a theoretical lens as well as real-life experience and examples of effective approaches.

Learning Outcomes • Understand how facility managers administer and manage construction and relocation projects • Policies and procedures developed and administered by facility managers that impact building occupants • Learn how facility managers contribute to their company’s social responsibility through sustainable building operations 4820-9932 T-Th, Dec 5-7, 8am-4:30pm $795, $695 if registered by Oct 5 Mark Sekula, FMP, CFM, LEED-AP, IFMA Fellow, Cornel Rosario 2 CEUs, 20 PDHs

Learning Outcomes • Align your organization’s mission with resources to maximize effectiveness

Introduction to Facility Management, Business Planning and Service Delivery

• Understand how innovation can affect strategic positioning

In this module you will learn the basics of facility management. From operations and maintenance to facility planning, it will cover all of the areas that a facility manager is responsible for when managing buildings.

4820-9935 T-W, Nov 14-15, 8am-4:30pm $595, $495 if registered by Sept 14 Mark Sekula, FMP, CFM, LEED-AP, IFMA Fellow 1.4 CEUs, 14 PDHs

• Implement effective strategies that integrate people, places, processes and technology

Learning Outcomes • Learn the basics of facility management • Decipher typical hard and soft services that facility managers are responsible for delivering • Understand the planning and business side of delivering facility management services 4820-9931 T-W, Sept 12-13, 8am-4:30pm $595 Mark Sekula, FMP, CFM, LEED-AP, IFMA Fellow, Cornel Rosario 1.4 CEUs, 14 PDHs

8

University of Wisconsin-Milwaukee School of Continuing Education


FOOD AND BEVERAGE

NEW Food, beverage, and ingredient manufacturer’s make-up a large portion of the manufacturing workforce in the United States. Food safety has to be an integral part of your business no matter how big your company as a food and beverage manufacturer. Food and Beverage Wisconsin’s (FaB) website states that recent data from the Centers for Disease Control and Prevention show about 3,000 deaths from foodborne diseases each year. These deaths are largely preventable through a better understanding of Industrial Food Hygiene and Safety. FaB manufacturers need to learn about the recent Food Safety Modernization Act (FMSA) regulations. Often this information is hard to assimilate in a manner that the manufacturing workforce can use it proactively. Also, there are some many regulations that it becomes hard to prioritize these in a manner that produces best practices. If you are new food safety professional, our courses can help you navigate the food safety landscape and help you build a food safety system that not only meets the requirements, but improves food safety, streamlines processes and sets the framework for a successful food safety culture.

NEW Food

Safety Certificate

A Food Safety Certificate will organize information in manner that is best suited for industry professionals. Your organization will benefit by sending food safety specialists, technicians, and managers. Directors and supervisors of Food Safety will benefit by seeing practical best practices used in the industry. These continuing education programs will be taught by practitioners who have many years of experience in this subject matter. They can articulate the information in a manner that will make it easy to implement best practices within their own organization. You can earn a Food Safety Certificate by attending 5 or more days of related courses in as little as 18 months (not to exceed three years).

NEW Food

Safety Basics

Does the alphabet soup of food safety have you confused? Are you unsure how the requirements of the Global Food Safety Initiative (GFSI) and the Food Safety Modernization Act (FSMA) apply to your organization? And what about Hazard Analysis and Critical Control Points (HACCP) and prerequisite programs (PRPs)? You will learn to navigate the food safety landscape and build a food safety system that not only meets the requirements, but improves food safety, streamlines processes and sets the framework for a successful food safety culture. Learning Outcomes • Understand the basic requirements of Good Food Safety Initiative (GFSI) • Learn the differences between Food Safety System Certification (FSSC 22000), Safe Quality Foods Program (SQF), and British Retail Consortium (BRC) • Document a Food Safety Plan as required by the FSMA

NEW Food

Safety Advanced

Gain an in-depth understanding of advanced best practices that will help your organization to be proactive about food safety. Prevent avoidable problems by creating a food safety culture which robust environmental monitoring. If you are in charge of the food safety program at your company, this course if designed for you. You understand that getting certified is only the first step. Continuing due diligence and improvement is required to ensure food safety every day. Learning Outcomes • Advanced understanding of food safety concepts and best practices • Building a food safety culture • Recognize common non-conformances and how to avoid them 4860-10328 Th-F, Oct 26-27, 8am-4:30pm $790, $690 if registered by Aug 26 Judy Sullivan 1.4 CEUs, 14 PDHs

4860-10329 W-F, Oct 4-6, 8am-4:30pm $990, $890 if registered by Aug 4 Judy Sullivan 2 CEUs, 20 PDHs

For more information uwm.edu/sce-eng

800-222-3623

9


Geometric Dimensioning & Tolerancing

INDUSTRIAL/ MECHANICAL The two areas of focus in Mechanical/ Industrial Engineering are Dimensioning and Tolerancing and Gear Technology. Dimensioning and Tolerancing ensure consistency and quality throughout the entire production process by learning this universal engineering language. All courses are taught by internationally renowned experts.

Gear Technology Certificate Although some level of complexity is involved with any manufacturing, the fickle and intricate nature of gear technology makes quality training all the more vital. Individual courses may be taken without pursuit of a certificate. Earn the certificate by completing three courses in as little as 18 months (not to exceed three years).

Ensure consistency and quality throughout the entire production process by learning this universal engineering language. Individual courses may be taken without pursuit of a certificate.

10

Learn and apply these techniques in datum selection and tolerancing optimization. This approach preserves functional product requirements, while taking into consideration manufacturing difficulties, introducing more producible tolerances, practical datum structures and pre-planning measurement methods. Learning Outcomes • Interpret and apply the latest standards – ASME Y14.5-2009 • Reduce drawing changes and interpretation errors while designing for maximum profitability • Bid contracts with confidence 4810-10151 M-W, Oct 9-11 8am-4:30pm, ends at noon on day 3 $1,390, $1,290 if registered by Aug 9 James Meadows 1.7 CEUs, 17 PDHs

Gain an understanding of parallel axis gear design, and learn to use the software tool, PowerGear, to analyze the main parameters involved. (A student version of the software is included in the price of the course.) Cover the basics of gear load capacity evaluation from a theoretical viewpoint, and use the PC as a tool to apply these theoretical concepts. Learning Outcomes • Understand durability (surface fatigue & wear), strength (tooth fracture) and scoring • Discuss typical sets of problematical design parameters from your current work assignments • Experience hands-on design perspective through group projects 4810-9737 T-Th, Aug 8-10, 8am-4:30pm $1,295 Raymond Drago, P.E. 2 CEUs, 20 PDHs

Gear Technology Basics – Design Aspects Develop your understanding of the history, basic gear tooth nomenclature, types of gears, gear arrangements, theory of gear tooth action, and failure modes and prevention. Now expanded to comprehensively cover important topics relating to gear system design consideration.

Dimensioning and Tolerancing Certificate

Earn the certificate by completing three courses in as little as 18 months (not to exceed three years).

Detail critical information on the basics of GD&T. From there, dive into the more difficult principles through lectures, realistic examples, discussions and application problems. Understand how to interpret and apply ASME Y14.5M-2009.

PC Applications in Parallel Axis Gear System Design and Analysis

Learning Outcomes • Build your knowledge of modern gear system design and analysis • Be able to distinguish between types of gears and gear arrangements • Discuss theory of gear tooth action, and derive parameters as they’re presented 4810-10340 T-Th, Dec 5-7, 8am-4:30pm $1,295, $1,195 if registered by Oct 5 Raymond Drago, P.E. 2 CEUs, 20 PDHs

University of Wisconsin-Milwaukee School of Continuing Education


BUSINESS PROCESS IMPROVEMENT Lean Six Sigma Yellow Belt Certificate Lean drives transformational, sustainable, bottom-line results through the use of proven methodologies to increase process efficiency, eliminate waste, reduce variation and improve customer satisfaction. Combine lean methodologies with the power of Six Sigma problem-solving and process improvement analysis to achieve high performance and secure a competitive advantage in an increasingly challenging economy. Earn the certificate by completing either the series of four face-to-face sessions or the 12-week online session and a capstone project. 4860-10147, 4 Sat, Oct 7-28, 8:30am-12:30pm $1,040 Erik Fadlovich 1.6 CEUs, 16 PDHs 4860-10389 Online, Open Enrollment through June 30, 2018 $890 Erik Fadlovich 1.6 CEUs, 16 PDHs

Six Sigma Green Belt for Services and Transactions Certificate Specifically designed for non-manufacturing operations. Acquire proven Six Sigma tools and skills in a services and transactions environment (e.g., IT and Healthcare). Discover methods to bring about breakthrough improvements and reduce errors in performance to generate significant cost savings.

Module II 4820-10001 T-Th, Oct 17-19, 8am-4:30pm $1,490 Davis Bothe 2 CEUs, 20 PDHs

Six Sigma Black Belt for Services and Transactions Certificate Specifically designed for non-manufacturing operations. Acquire proven Six Sigma tools and skills in a services and transactions environment (e.g., IT and Healthcare). Discover methods to bring about breakthrough improvements and reduce errors in performance to generate significant cost savings. Earn the certificate by completing all four modules and a capstone project within three months after the last module. Module I 4820-10000 T-Th, Sept 26-28, 8am-4:30pm $1,490 Davis Bothe 2 CEUs, 20 PDHs Module II 4820-10001 T-Th, Oct 17-19, 8am-4:30pm $1,490 Davis Bothe 2 CEUs, 20 PDHs Module III 4820-10002 T-W, Oct 31-Nov 1, 8am-4:30pm $1,390 Davis Bothe 1.4 CEUs, 14 PDHs

Six Sigma Black Belt Training Certificate Obtain proven six sigma skills and practical experience to transform your organization beyond world-class performance. If you are already a Six Sigma Green Belt, you may be able to enroll in Modules I and IV of our Black Belt Series and receive a Black Belt upon completion of a capstone project. Earn the certificate by completing four modules and homework assignments as well as a capstone project. Module I - Define and Measure 4820-9995 T-Th, Sept 12-14, 8am-4:30pm $1,395 Davis Bothe 2 CEUs, 20 PDHs Module II - Measure and Analyze 4820-9996 T-W, Oct 3-4, 8am-4:30pm $1,295 Davis Bothe 1.4 CEUs, 14 PDHs Module III - Analyze and Improve 4820-9997 T-W, Oct 24-25, 8am-4:30pm $1,295 Davis Bothe 1.4 CEUs, 14 PDHs Module IV - Improve and Control 4820-9998 T-Th, Nov 14-16, 8am-4:30pm $1,395 Davis Bothe 2 CEUs, 20 PDHs

Module IV 4820-10010 T-W, Nov 7-8, 8am-4:30pm $1,390 Davis Bothe 1.4 CEUs, 14 PDHs

Earn the certificate by completing both modules and a capstone project within three months after the last module. Module I 4820-10000 T-Th, Sept 26-28, 8am-4:30pm $1,490 Davis Bothe 2 CEUs, 20 PDHs

For more information uwm.edu/sce-eng

800-222-3623

11


WATER TECHNOLOGY

NEW

SUPPLY CHAIN MANAGEMENT Supply chain management covers many aspects, from product development, pricing, production, and logistics, as well as the small steps in between. Management of activities to add customer value and achieve a competitive advantage with knowledge and process.

Supply Chain Management Basics Get a fundamental overview of the supply chain process and its role in business. The course will address the supply chain strategy and how companies are improving their competitive advantage through their supply chain improvements. This course is ideal for buyers, logistics and warehousing managers, inventory managers, manufacturing engineering, business and materials planning managers. 4820-10385 T-Th, Nov 7-9 8am-4:30pm, ends at 3pm on day 3 $1,295, $995 if registered by Sept 7 Joe Maalouf 2 CEUs, 20 PDHs

Explore the latest in technology, law, policy and practices related to storm water, waste water and drinking water. The courses are relevant to inspectors; consultants; municipal facility managers; contractors; city, state and federal employees; lawyers; and others involved with water issues. Water technology is an important topic locally and globally. Develop a foundation through a variety of timely courses and earn a UWM Water Technology Certificate. Learn about trends and new requirements that have become part of our lives.

Water Technology Certificate All of the Water Technology courses listed may be applied toward earning a UWM Water Technology Certificate. Earn the certificate by attending nine or more days of related courses within two years

Sustainable Water Management - An Introduction ONLINE Lay the foundation for quality water resources in the future by learning to manage them today. Cover concepts for long-term sustainability by focusing on environmental science, engineering, public health, and the social and economic benefits provided by clean, safe, water. Learning Outcomes • Recognize sustainable water management practices

Environmental Regulatory Overview Two landmark pieces of Federal legislation have had major impacts on improving the quality of our drinking water and our lakes and streams in the United States. Review key pieces of both the Safe Drinking Water Act (SDWA) and the Clean Water Act (CWA) laws from a real world perspective. A detailed overview of both regulations will be presented, to provide a basic working knowledge of the history, drinking water standards, treatment techniques, the wastewater permitting process, storm water, CWA Sections 316a and b, CWA Section 404, storm water, effluent guidelines, spill prevention legislation and much more. Learning Outcomes • Learn the key pieces of both the Safe Drinking Water Act (SDWA) and the Clean Water Act (CWA) laws • Understand treatment techniques, permitting processes and spill prevention legislation • Obtain a basic working knowledge of the history of drinking water and other regulatory standards 4850-9738 Th, Sept 21, 8am-4:30pm $315 Adam Hess, Dick Osantowski, P.E. 0.7 CEUs, 7 PDHs

Using Native and Naturalized Landscape for Designing Effective Site Stormwater Systems Gain an understanding of how to analyze, design, implement and manage effective and innovative stormwater management systems using native landscape for a variety of sites – large, small, rural, or urban. Learn about how a thorough site analysis of soils, terrain and hydrology can influence design approach using native and naturalized plant selections. Several case studies of built projects are presented and the attendees get first-hand knowledge of how to approach site design, plant selection, construction and maintenance.

• Provide clean, safe water for your community

Learning Outcomes

• Apply basic design concepts for sustainable water management

• Incorporate native and naturalized plants into stormwater design for ecological benefit and potential cost savings

4850-10336 Online, Sept 1-June 30, 2018 $315 Dick Osantowski, P.E. 0.7 CEUs, 7 PDHs

• Evaluate plans and specifications and understand both pitfalls and success on projects • Understand how to use native plants in a realistic way to maximize benefits

– David Emmerich, Project Engineer, Evoqua Water Technologies, LLC

12

4850-10077 F, Oct 27, 8am-4:30pm $315 Lesley Brotkowski, Tom Mortensen, Sean Hayes 0.7 CEUs, 7 PDHs

University of Wisconsin-Milwaukee School of Continuing Education


ENHANCE YOUR VALUE IN THE WORKPLACE With an Engineering Certificate from the School of Continuing Education Stay up to date with the latest concepts and technology in the engineering field. Professional certificates are an affordable and convenient way to increase your value in the workplace. Frequently attained as a supplement or a stepping stone to a degree, certificates are earned through noncredit, hands-on professional development. It’s difficult to take just one course, sign up for multiple and earn a certificate – impress your employer, impress yourself. Certificates are offered in the areas below, start today! All certificates can be earned in 18 months or less, not to exceed 3 years. • Dimensioning and Tolerancing Certificate • Elastomer Technology Certificate • Electrical Engineering Certificate • Facility Management Certificate • Food Safety Certificate • Gear Technology Certificate • Lean Six Sigma Yellow Belt • Office Lean Certificate • Plastics Technology Certificate • Six Sigma Black Belt for Services and Transactions Certificate • Six Sigma Black Belt Training Certificate • Six Sigma Green Belt for Services and Transactions Certificate • Water Technology Certificate

UWM.EDU/SCE-ENG “If I would’ve had this opportunity when I started in the business, I would’ve probably gotten about at least a five or six year head start. Rather than having to learn everything on my own.” – John Vosmeier, Instructor


SCHOOL OF CONTINUING EDUCATION

CUSTOMIZED TRAINING GROUP TRAINING. YOUR PLACE OR OURS. UWM can customize training solutions to meet your specific business needs. We assemble a team of experts to clearly identify your training goals, design curriculum and deliver a solution that achieves those goals.

414-227-3264 | sce-customized@uwm.edu

14

University of Wisconsin-Milwaukee School of Continuing Education


REGISTRATION INFORMATION Online

Phone

In Person

Enter the 8-9-digit program number from the catalog listing into our website’s search tool at uwm.edu/sce. Review course details and click “Register Now.“

Have your 8-9-digit program number and credit card handy.

Registration Services are located on the 6th floor in the Plankinton Building above The Shops of Grand Avenue.

Registration Services Monday-Friday 8am-5pm 414-227-3200 800-222-3623

Food Safety Advanced 8-9-digit program number in catalog

Gain an in-depth understanding of advanced best practices that will help... 4860-10328 Oct 26-27

School of Continuing Education 161 W. Wisconsin Ave., 6th Floor Milwaukee, WI 53203 Monday-Friday 8am-5pm

You do not have to apply or be enrolled at UWM to register for courses.

$790 Judy Sullivan

Location

Register Early and Save

We are conveniently located in downtown Milwaukee in the Plankinton building above The Shops of Grand Avenue. Courses are held on the 7th floor.

Some courses have discounts for early registration.

Parking

A full refund is issued to program participants if the School of Continuing Education cancels a program for any reason. Participant withdrawals made at least two weeks (14 days) prior to the start of a program can receive a 100% refund. When a participant withdraws less than two weeks prior to the program start, participants may have their fees transferred one time to any currently available program, otherwise participants will receive a refund minus a 20% administrative fee. For programs with a fee of $35 or less, no refund will be given. Once a program has begun, refunds are no longer issued.

Program Cancellations/Refunds

We provide a discount for participants who park in The Shops of Grand Avenue structure. More information at uwm.edu/sce/directions.

Where to Stay Visit uwm.edu/sce-hotels for an abundance of nearby lodging options. Please note that participants make their own travel reservations. UWM recommends making reservations that may be cancelled or transferred in case of program changes.

CONFERENCE CENTER EXCEPTIONAL SERVICE. FLEXIBLE SPACES.

Tour Online | uwm.edu/sce In Partnership with UW-Extension. No Wisconsin tax dollars were used in the printing of this publication.

For more information uwm.edu/sce-eng

800-222-3623

15


161 W. Wisconsin Ave., Ste., 6000 Milwaukee, WI 53203-2602

!

DON’T FORGET TO USE THESE CODES WHEN REGISTERING

Your Keycode:

WPDF Your Message Code:

MR-20-17-W

This organization has given me some amazing professional development opportunities, which has allowed me to continue to grow and advance through my careers. Giving me confidence and networking opportunities both personally and professionally. – J ILL MEYER, PHD, EXECUTIVE DIRECTOR - INSTITUTIONAL EFFECTIVENESS, MOUNT MARY UNIVERSITY

Message Code: MR-20-17-W

16

University of Wisconsin-Milwaukee School of Continuing Education

UW-Milwaukee Fall 2017 Engineering Programs Catalog  

Training and certification for engineers, quality and sustainability professionals. Triz, tolerance stack-up, system design, six sigma, rub...