Page 1

Accessoires et Pièces Harley-Davidson Importés par US Dream Import en France Site : http://www.usdream.fr/ Hotline : +33(0)6 60 06 46 59 E-Mail : info@usdream.fr

EXHAUST

6

IMPORTANT INFORMATION RELATING TO EXHAUST PRODUCTS: DISCLAIMER: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, i.e. cam timing, carburetor, etc., and is not caused by defective manufacturing. See the HARDWARE, CHEMICALS & TOOLS section for products that will help prevent or remove blueing. DISCLAIMER: Exhaust systems for OEM non-emission control system equipped motorcycles as well as slip-on mufflers that mount downstream of and which do not inhibit the proper function of emission control systems are considered legal replacement parts by the California Air Resources Board (CARB). CARB does not, however, permit the use of aftermarket exhaust systems that remove or alter OEM emission control devices unless certified by CARB, other than on racing vehicles on closed courses. More California exhaust information is available at www.arb.ca.gov/. DISCLAIMER: Products shown may be designed, manufactured, intended and sold for use on competition vehicles that are operated only on closed course racing circuits unless otherwise noted and use of the same on public roads or lands may be a violation of local, state and/or federal laws. DISCLAIMER: Check your applicable laws and manufacturer’s publication(s) and/or website(s) for manufacturer’s warranty, maintenance, safety, mounting and any regulatory compliance/non-compliance information.

335


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE 1800-1410

SEATS & SISSY BARS EXHAUST

1800-1422

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

1800-1411

GASKETS & SEALS

1800-1412

ELECTRICAL

V21869

LIGHTING 1800-1413

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS

1861-0477

BIG SHOTS STAGGERED AND LONG •Feature the revolutionary Power Chamber™ design; a unique crossover system that increases horsepower and torque •Armed with full-coverage 21/2” heat shields that are essentially blueproof for long-lasting style •Like all Vance & Hines systems, these feature a superior fit and an unrivaled finish in either chrome or race-quality black ceramic coat •New flat plane mounting panel for the 12mm oxygen sensors now featured across the 12-13 Softail/Dyna model lines; mounting panel positions sensor deeper into exhaust stream, providing enhanced data feedback to the ECM •Meticulously finished billet end caps •Removable baffles and all mounting hardware included •Made in the U.S.A.

V16917

NOTE: Will not fit models with kickstarts.

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

336

CHROME PART # DESCRIPTION FOR 12-13 FXS/FLS/FLST MODELS 1800-1410 Staggered w/ slash-cut end caps 1800-1422 Long w/ straight-cut end caps FOR 86-11 FXS/FXST/FLST MODELS (EXCEPT 09 FXSTSSE) 1 1800-0447 Staggered 1800-04481 Long FOR 12-13 DYNA MODELS (EXCEPT 12 FLD) 1800-1411 Staggered w/ slash-cut end caps 1

SUG. RETAIL

Pre 07 models will require O2 sensor port plug kit PART #1861-0464 (sold separately).

$629.95 703.95 624.95 699.95 629.95

Power Chamber

BLACK PART # DESCRIPTION FOR 12-13 FXS/FLS/FLST 1800-1412 Staggered w/ straight-cut end caps FOR 86-11 FXS/FXST/FLST MODELS (EXCEPT 09 FXSTSSE) 1800-10701 Staggered FOR 12-13 DYNA MODELS (EXCEPT 12 FLD) 1800-1413 Staggered w/ straight-cut end caps FOR 06-11 DYNA MODELS 1800-1071 Staggered 1

SUG. RETAIL $685.95 680.95 685.95 680.95

Pre 07 models will require O2 sensor port plug kit PART #1861-0464 (sold separately).

PART # DESCRIPTION REPLACEMENT/OPTIONAL END CAPS/BAFFLES FOR BIG SHOTS STAGGERED AND LONGS V16917 Slash billet end caps (pr.) V16919 Straight billet end caps (pr.) V21869 Quiet Baffle, 2-3 dB quieter (ea.) 1861-0477 Repl. standard baffle (ea.)

SUG. RETAIL $89.95 59.95 29.95 28.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1800-1006

1800-1482

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING

1800-1017

HANDLEBARS, CONTROLS & MIRRORS

1800-1484

CABLES

BRAKES

BIG RADIUS 2-INTO-1 •Traditionally viewed as the kind of pipe merely designed for performance, Big Radius 2-into-1 breaks the mold, delivering white-knuckle performance with the style that has won over the motorcycle public •Incorporating blue-proof technology across the entire length of the pipe, Big Radius 2-into-1 will keep its showroom finish whether at the dragstrip or on the boulevard •Includes mounts for factory O2 sensors as required •Optional left passenger peg relocation kit for 86-13 Softail models matches left peg to right peg’s position after installation of Big Radius •Made in the U.S.A.

TANKS & OIL FILTERS DASHES & GAUGES 1800-1485

FRAMES, SUSPENSION & FENDERS

NOTE: Not for Softail models with Heritage-style saddlebags. PART # CHROME 1800-1006 1800-1482 1800-04411 1800-14842 1800-04422 1620-0509 1 2

DESCRIPTION

SUG. RETAIL

PART # BLACK 1800-1483 1800-10171 1800-14852 1800-10222 1620-0509

For 08-11 FXCW/C, 09 FXSTSSE models $719.95 For 12-13 FXS/FLS/FLST models 724.95 For 86-11 FXS/FXST/FLST models (except 09 FXSTSSE) 719.95 For 12-13 FXDB/FXDF models 724.95 For 06-11 FXDB/FXDF models 719.95 Optional left passenger peg relocation kit for 86-11 Softail models 21.95 Pre 07 models will require O2 sensor port plug kit PART #1861-0464 (sold separately). Will also fit FXD/FXDC/FXDL/FXDWG if passenger pegs are removed.

DESCRIPTION For 12-13 FXS/FLS/FLST models For 86-11 FXS/FXST/FLST models (except 09 FXSTSSE) For 12-13 FXDB/FXDF models For 06-11 FXDB/FXDF models Optional left passenger peg relocation kit for 86-13 Softail models

SUG. RETAIL $824.95 819.95 824.95 819.95

WHEELS & AXLES

21.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

337


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST 1800-1408

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

1800-1067

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1800-1421

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

338

BIG RADIUS

1800-0746

•Big 21/2” full header and muffler heat shield system is virtually blue-proof •Chrome pipes feature scalloped tips for a unique look (except XL which are slash-cut) •Black pipes are all slash-cut and feature heat shields coated with a race-quality black ceramic contrasted with a signature chrome badge and tips (except XL) •Removable baffles and mounting hardware included •New flat plane mounting panel for the 12mm oxygen sensors now featured across the 12-13 Softail/Dyna model lines; mounting panel positions sensor deeper into exhaust stream, providing enhanced data feedback to the ECM •Optional left passenger peg relocation kit for 99-09 FL models (PART #1620-0510) matches left peg to right peg’s position after installation of Big Radius •Made in the U.S.A. PART # DESCRIPTION FOR HARLEY-DAVIDSON MODELS, CHROME 1800-0994 For 08-11 FXCW/C, 09 FXSTSSE 1800-1408 For 12-13 FXS/FLST 1800-04461 For 86-11 FXS/FLS/FXST/FLST (except 09 FXSTSSE) 1800-1409 For 12-13 Dyna (except 12-13 FLD) 1800-0239 For 06-11 Dyna 1800-0083 For 91-05 Dyna 1800-1215 For 10-13 FLHT, FLTR, FLHX, FLHR 1800-1067 For 09 FLHT, FLTR, FLHX, FLHR

SUG. RETAIL $699.95 704.95 699.95 704.95 699.95 679.95 699.95 699.95

PART # DESCRIPTION SUG. RETAIL FOR HARLEY-DAVIDSON MODELS, CHROME (CONT) 1800-0748 For 07-08 FLHT, FLTR, FLHX, FLHR $699.95 1800-0955 For 99-06 FLHT, FLHR, FLHX, FLTR 679.95 1800-12171 For 04-13 XL 599.95 1620-0510 Optional left passenger peg relocation kit for 99-09 FL 21.95 FOR HARLEY-DAVIDSON MODELS, BLACK 1800-0995 For 08-11 FXCW/C, 09 FXSTSSE 799.95 1800-1421 For 12-13 FXS/FLST 804.95 1 1800-0746 For 86-11 FXS/FLS/FXST/FLST (except 09 FXSTSSE) 799.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS

BIG RADIUS (CONT)

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

1800-0956

FUEL/AIR SYSTEMS 1800-1068

ENGINE TRANSMISSION & DRIVELINE

PART # DESCRIPTION SUG. RETAIL FOR HARLEY-DAVIDSON MODELS, BLACK (CONT) 1800-1420 For 12-13 Dyna (except 12-13 FLD) $804.95 1800-0956 For 06-11 Dyna 799.95 1800-1068 For 09 FLHT, FLTR, FLHX, FLHR 799.95 1800-0957 For 07-08 FLHT, FLTR, FLHX, FLHR 799.95 1800-12181 For 04-13 XL 679.95 1620-0510 Optional left passenger peg relocation kit for 99-09 FL 21.95 FOR BIG DOG MOTORCYCLES™ RIGHT SIDE DRIVE MODELS, CHROME 1800-0592 For 06-10 K9, Mastiff (carb models only) 679.95 1

GASKETS & SEALS 1800-1218

Pre 07 models will require O2 sensor port plug kit PART #1861-0464 (sold separately).

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1800-0584

FRAMES, SUSPENSION & FENDERS

Q-SERIES DOUBLE BARREL •A quieter standard, that’s what the Q series is all about, plus they’re loaded with other features •100% blue-proof technology with 220° head pipe and muffler heat shields •Proprietary Power Chamber technology for the right horsepower and torque gains all the way through the power band •Slash-cut ends to finish off the look •Made in the U.S.A. PART # 1800-05841 1

FOOTRESTS & LICENSE PLATE FRAMES 1800-0586

DESCRIPTION SUG. RETAIL For 86-11 FXS/FXST/FLST models (except 09 FXSTSSE) $554.95

PART # 1800-05861

DESCRIPTION For all 04-13 XL

WHEELS & AXLES SUG. RETAIL $554.95

Pre 07 models will require O2 sensor port plug kit PART # 1861-0464 (sold separately).

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

339


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1800-0264

ENGINE 1800-0744

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1800-0753

CABLES

BRAKES TANKS & OIL FILTERS 1800-0751

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

340

SIDESHOTS •Feature Vance & Hines’ Power Chamber technology •Massive 220° full-length 21/2” header pipe and muffler heat shield •Twin slash-cut end caps finish off the look •Removable baffles and mounting hardware included •Black systems feature full coverage heat shields coated with a race-quality black ceramic, contrasted with a signature chrome badge and tips •Made in the U.S.A. PART # CHROME 1800-0264 1800-07501 1861-0072 1

DESCRIPTION For 06-11 Dyna models For 04-13 XL models Quiet baffle (ea.)

SUG. RETAIL $648.95 599.95 36.95

PART # BLACK 1800-07441 1800-0753 1800-07511 1861-0072

1861-0072

Power chamber DESCRIPTION For 86-11 FXS/FXST/FLST models (except 09 FXSTSSE) For 06-11 Dyna models For 04-13 XL models Quiet baffle (ea.)

SUG. RETAIL $719.95 719.95 688.95 36.95

Pre 07 models will require O2 sensor port plug kit PART #1861-0464 (sold separately).

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE 1800-1414

SEATS & SISSY BARS

1800-0467

EXHAUST FUEL/AIR SYSTEMS

1800-0154

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

1800-0745

1800-1367

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES

1800-0793 1800-1417

1861-0072

SHORTSHOTS STAGGERED •A revolution in blue-proof exhaust technology, Vance & Hines delivers the short, fat, straight-pipe look with twin slash-cut ends •High style and performance combined with unbeatable value •13/4” headpipes with 220° coverage heat shields •New flat plane mounting panel for the 12mm oxygen sensors now featured across the 12-13 Softail/Dyna model lines; mounting panel positions sensor deeper into exhaust stream, providing enhanced data feedback to the ECM •Includes removable baffles, mounting hardware and instructions •Black pipes feature full coverage heat shields coated with a race-quality black ceramic contrasted with a signature chrome badge and end tips •Made in the U.S.A. PART # CHROME 1800-1414 1800-1209 1800-04521 1800-1416 1800-0263 1800-0154 1800-04671 1800-1367 1861-0072

DESCRIPTION

SUG. RETAIL

For 12-13 FXS/FLS/FLST For 08-11 FXCW/C models, 09 FXSTSSE For 86-11 FXS/FXST/FLST models (except 09 FXSTSSE) For 12-13 Dyna models (except 12-13 FLD) For 06-11 Dyna models For 91-05 Dyna Glide models For 04-13 XL models For 99-03 XL models Quiet Baffle (ea.)

$384.95 379.95 379.95 384.95 379.95 359.95 379.95 379.95 36.95

PART # BLACK 1800-1415 1800-07451 1800-1417 1800-0793 1800-07521 1861-0072 1

DESCRIPTION

SUG. RETAIL

For 12-13 FXS/FLS/FLST For 86-11 FXS/FXST/FLST models (except 09 FXSTSSE) For 12-13 Dyna models (except 12-13 FLD) For 06-11 Dyna models For 04-13 XL models Quiet Baffle (ea.)

$464.95 459.95 464.95 459.95 459.95 36.95

Pre 07 models will require O2 sensor port plug kit PART #1861-0464 (sold separately).

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

341


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST V17209

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS V17205

CABLES

BRAKES TANKS & OIL FILTERS V21867

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

342

SHORTSHOTS ORIGINAL •Share many of the famed Straightshots features, except in a shorty version for a short-piped, hot-rod-bike look •The 13/4” pipes exit at the end of the frame just in front of the rear wheel •Full coverage shields; 220° plasma-cut heat shields run all the way back to the meticulously finished end caps •Include removable baffles and mounting hardware •Made in the U.S.A.

V17207

NOTE: Will not fit models with kickstarts. PART # V17209 V17205

DESCRIPTION For 86-06 Softail models For 91-05 Dyna Glide models (except 03-05 FXDWG)

SUG. RETAIL $328.95 329.95

PART # V17207 V21867

DESCRIPTION For 87-99 FXR models Repl. baffle w/ end cap (ea.)

SUG. RETAIL $328.95 32.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE 1800-1208

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL 1800-1222

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1861-0477

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES V21869

1800-1216

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

STRAIGHTSHOTS •21/4” mufflers are welded to 13/4” head pipes; all are covered by one-piece, large 21/2” full-coverage, full-length chrome header/muffler heat shields that are virtually blue-proof •Feature the traditional Vance & Hines hot-rod sound •Removable baffles and mounting hardware included •Made in the U.S.A.

PART # 1800-12081 1800-1222 1800-12161 1861-0477 V21869

NOTE: Will not accept Hot Tips.

1

DESCRIPTION For 86-11 FXS/FXST/FLST, 10-11 FLSTSE models (except 09 FXSTSSE) For 06-11 Dyna models For 04-13 XL models Repl. baffle for PART #s 1800-1216, 1800-1222 (ea.) Opt. quiet baffle (ea.)

SUG. RETAIL $424.95 424.95 424.95 28.95 29.95

Pre 07 models will require O2 sensor port plug kit PART #1861-0464 (sold separately).

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

343


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1801-0258

EXHAUST FUEL/AIR SYSTEMS 1801-0259

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS 1801-0260

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1801-0111

CABLES

BRAKES TANKS & OIL FILTERS

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

344

V21869

1801-0088

DASHES & GAUGES STRAIGHTSHOTS SLIP-ONS

•Superior performance and style without breaking the bank •Straightshots HS Slip-ons offer the same great look and sound riders have grown to love from Vance & Hines at an unbelievable value •Drenched in Vance & Hines show-quality chrome, massive 21/2” diameter plasma arc-cut, 220° full-coverage muffler heat shields house the Straightshots HS Slip-ons and make them blue-proof for long-lasting style •Race-inspired performance and traditional hot rod sound set this system apart •Mount to the stock-header pipes with no modifications •Includes removable baffles and all the mounting hardware for a hassle-free, perfect fit every time •Made in the U.S.A. PART # 1801-0258 1801-0110 1801-0259 1801-0260

DESCRIPTION For 07-13 FXST/C, FLST/C, 08-11 FXCW/C For 00-06 FXST/C, FLST/C For 07-13 FLSTF, FXSTD For 05-13 FLSTN, 08-11 FLSTSB, 12-13 FLS

SUG. RETAIL $299.95 289.95 299.95 299.95

PART # 1801-0111 1801-0088 V21869

DESCRIPTION For 91-13 Dyna Glide models (except 08-13 FXDF, 10-13 FXDWG, 12-13 FLD) For 04-13 XL models Opt. quiet baffle (ea.)

SUG. RETAIL $289.95 279.95 29.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS V16805

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS V16809

ELECTRICAL

STRAIGHTSHOTS ORIGINAL •All Straightshots feature full-length, chrome 220° coverage heat shields that are each plasma-arc cut from a full piece of tubing that matches the bodies exactly for a perfect, non-blueing, fat pipe look •Feature 13/4” headpipes with 21/4” bodies •Customize Straightshots with one of the unique, optional, plasma-arc cut Hot Tips that can be mounted and rotated in two different angles for different looks; or run Straightshots straight •Hot Tips are available separately and sold in pairs •Removable baffles provide powerful sound but tone down the bark of normal straight pipes •Systems include all necessary mounting hardware and instructions for a hassle-free, perfect fit every time •Made in the U.S.A. PART # V16805 V16809

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES V16811X

DESCRIPTION For 91-05 Dyna Glide models (except FXDX/FXDXT) For 86-03 XL models (except 883C and 1200C)

SUG. RETAIL $445.95 445.95

PART # V16811X V21269

DESCRIPTION For 99-03 XL 883C and 1200C models Repl. baffle (ea.)

SUG. RETAIL $749.95 24.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

16901

16903

16905

V16913

HOT TIPS FOR STRAIGHTSHOTS ORIGINAL SYSTEMS •Interchangeable Hot Tips let you change the look of the bike several different ways in minutes •Each Hot Tip is either custom plasma-arc cut from tubing or machined from billet aluminum for a look that can’t be matched by others •Hot Tips can be mounted and rotated to two different angles to highlight their one-of-a-kind designs •Beautiful chrome finish tops off each Hot Tip •Sold in pairs •Made in the U.S.A. PART # 16901 16903

DESCRIPTION Velocity long-style Hot Tips Vortex-style Hot Tips

SUG. RETAIL $49.95 49.95

PART # 16905 V16913

DESCRIPTION Viper-style Hot Tips Billet-style Hot Tips

SUG. RETAIL $49.95 112.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

345


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION V21869

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

LONGSHOTS HS •Large 21/2” full-coverage header and muffler heat shields are virtually blue-proof •Feature the traditional Vance & Hines hot-rod sound •Scalloped slash-cut ends •Removable baffles and mounting hardware included •Made in the U.S.A.

1800-0017

NOTE: Will not accept Hot Tips. PART # 1800-0017

DESCRIPTION For 86-06 Softail models

SUG. RETAIL $579.95

PART # V21869

DESCRIPTION Optional quiet baffle (ea.)

SUG. RETAIL $29.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

346

V17811

LONGSHOTS ORIGINAL •Feature 13/4” headpipes with 21/4” bodies •Include full-length, 220° coverage heat shields that are plasma-arc cut from a full piece of tubing that matches the bodies exactly for a perfect, non-blueing fat pipe look •Removable baffles provide powerful sound but tone down the bark of normal straight pipes •Customize your Longshots with optional plasma-cut Hot Tips that can be mounted and rotated to two different angles •Hot Tips are available in several styles and are sold separately in pairs •Systems include all necessary mounting hardware and instructions PART # V17811 V17805

DESCRIPTION For 86-06 Softail models For 91-05 Dyna Glide models

SUG. RETAIL $474.95 474.95

V17805

PART # V21269

DESCRIPTION Repl. baffle (ea.)

SUG. RETAIL $24.95

HOT TIPS FOR LONGSHOTS ORIGINAL SYSTEMS •Interchangeable Hot Tips let you change the look of the bike several different ways in minutes •Each Hot Tip is either custom plasma-arc cut from tubing or machined from billet aluminum for a look that can’t be matched by others •Hot Tips can be mounted and rotated to two different angles to highlight their one-of-a-kind designs •Beautiful chrome finish tops off each Hot Tip •Sold in pairs •Made in the U.S.A. PART # 16901 16903

DESCRIPTION Velocity long-style Hot Tips Vortex-style Hot Tips

SUG. RETAIL $49.95 49.95

16901

16905 PART # 16905 V16913

DESCRIPTION Viper-style Hot Tips Billet-style Hot Tips

16903

V16913 SUG. RETAIL $49.95 112.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

1800-1517

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES 1800-1473

1861-0709

BRAKES PRO PIPE •Includes tuned length stepped headers with a highly efficient merge collector that feeds into the stepped 41/2” megaphone design •Complete with header and collector heat shields, as well as a shield over the first step of the megaphone; also features a CNC-machined chrome plated billet end cap •New flat plane mounting panel for the 12mm oxygen sensors now featured across the 12-13 Softail/Dyna model lines; mounting panel positions sensor deeper into exhaust stream, providing enhanced data feedback to the ECM •Made in the U.S.A.

TANKS & OIL FILTERS 1861-0793

NOTE: Not for Softail models with Heritage-style saddlebags. PART # CHROME 1800-1470 1800-12061 1800-1207 1800-1493 1800-1517 1800-1221 1800-1210 1800-1211 1800-12121

DESCRIPTION For For For For For For For For For

SUG. RETAIL

12-13 FXS/FLS/FLST 86-11 FXS/FXST/FLST models (except 09 FXSTSSE)1 08-11 FXCW/C, 09 FXSTSSE models 12-13 Dyna models (except 12-13 FLD) 12-13 FLD 06-11 Dyna models 10-13 FLHT, FLHR, FLHX, FLTR models 09 FLHT, FLHR, FLHX, FLTR models 99-08 FLHT, FLHR, FLHX, FLTR models

$604.95 599.95 599.95 604.95 604.95 599.95 599.95 599.95 599.95

PART # DESCRIPTION SUG. RETAIL BLACK 1800-1473 For 12-13 FXS/FLS/FLST $749.95 1800-14761 For 86-11 FXS/FXST/FLST models (except 09 FXSTSSE) 749.95 1800-1474 For 12-13 Dyna models (except 12-13 FLD) 749.95 1800-1477 For 06-11 Dyna models 749.95 1800-1475 For 10-13 FLHT, FLHR, FLHX, FLTR models 749.95 1 1800-1478 For 99-08 FLHT, FLHR, FLHX, FLTR models 749.95 OPTIONAL COMPONENTS 1861-0709 Opt. competition baffle (ea.) 94.95 1861-0793 Opt. quiet baffle (ea.) 95.95 1

Non-sensor applications will require O2 sensor port plug kit PART #1861-0464 (sold separately).

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

347


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1800-1554

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

1800-1555

STAINLESS HI-OUTPUT 2-INTO-1 •Engineered for high output engine modifications •Dyno developed and tested to increase volumetric efficiency critical to extracting maximum horsepower from high output engine modifications •13/4” to 2” tapered headpipes with 21/2” inlet to megaphone and 4” to 41/2” stepped muffler body •3” to 31/4” baffle with anti-reversion cone •All stainless steel construction with TIG welding and race-inspired brushed stainless “Works” finish •Contoured laser-cut heat shields •Flat plane 12mm and quick access 18mm oxygen sensor ports for wideband tuning capability •Made in the U.S.A. PART # 1800-1554 1800-1555

DESCRIPTION For 86-13 FXS/FLS/FXST/FLST models For 06-13 Dyna models (except FLD)

1800-1491

SUG. RETAIL $999.95 999.95

PART # 1800-1491

DESCRIPTION For 09-13 FLHT, FLHR, FLHX, FLTR models

SUG. RETAIL $999.95

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

348

Backview of collector

V21299 V23075

PRO-PIPE HS

•2-into-1 Pro-Pipe is the system Byron Hines developed when Vance & Hines decided they wanted to make the absolute best-performing pipe on the market for Harley motors •Meticulous engineering; a hand-made race collector and specifically designed head pipes produce maximum scavenging of spent exhaust gases, then a special baffle system provides just the right sound •Collector design is blue-proof •Superior fit and chrome finish when compared to other 2-into-1 systems •True full-length 220° wrap heat shields •Removable baffle and all mounting hardware included •Made in the U.S.A.

V17523

NOTE: For 03-05 Dyna applications you must use exhaust flanges OEM #65328-83. PART # DESCRIPTION V17523 For 91-05 Dyna models BAFFLES AND END CAPS V21299 Repl. standard baffle (ea.)

SUG. RETAIL $529.95 29.95

PART # DESCRIPTION BAFFLES AND END CAPS (CONT) V21389 Repl. competition baffle (ea.) V23075 Repl. end cap (ea.)

SUG. RETAIL $40.95 57.95

BLACKOUT 2-INTO-1 •Two of the baddest looking models in the Harley Dark Custom line-up are the Sportster Iron and Nightster •Here is the baddest looking exhaust system to do these Dark Custom darlings justice •Also compatible with all other Sportster models; system makes the already quick and nimble Sportster a menace to be reckoned with •Features a durable high temperature matte black ceramic coating with a matching matte black end cap and riveted-on Vance & Hines badge PART # 1800-12201 1861-0593 1

DESCRIPTION For 04-13 XL models Opt. quiet insert (requires baffle mods) (ea.)

1861-0593

SUG. RETAIL $474.95 21.95

Pre 07 models will require O2 sensor plug port kit PART #1861-0464 (sold separately).

1800-1220

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1800-1487 1800-1488

ENGINE TRANSMISSION & DRIVELINE

SWITCHBACK DUALS WITH SLIP-ON MUFFLERS •Designed exclusively for the new Dyna Switchback, Vance & Hines introduces complete exhaust systems that bring the classic look of true duals to the Switchback, paired with either Twin Slash Round or Monster Round slip-on mufflers 1800-1487 •Feature beautifully crafted chrome plated mounting brackets for the mufflers Rear mount system that look great on the Switchback even when riding without the saddlebags •All Switchback Duals feature full-coverage heat shields over the head pipes •4” Round Twin Slash slip on mufflers are marked by the signature V&H twin slash end treatment and put out a nice aggressive rumble that can be toned down with optional sound inserts PART #1861-0593 (sold separately) •4” Monster Round slip-on mufflers with CNC-machined billet end caps pulse with the same deep rich tone as Monster Rounds on Touring models •Includes flat plane mounting panel for the 12mm oxygen sensors utilized on the Dyna Switchback, which positions the sensor deeper into the exhaust stream, providing enhanced data feedback to the ECM PART # FOR 12-13 FLD MODELS 1800-1487 1800-1488

DESCRIPTION Swtichback Duals with Twin Slash Slip-On Mufflers Swtichback Duals with Monster Round Slip-On Mufflers

SUG. RETAIL $999.95 1,299.95

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

POWER SHOTS

FOOTRESTS & LICENSE PLATE FRAMES

•Unique dual-staggered, twin-layered slash-cut end tips •Two 21/2” muffler bodies, complete with removable baffles and featuring Vance & Hines signature hot-rod sound; include a single chrome 360° heat shield •Feature the Power Chamber™ crossover system for increased horsepower and torque •Require the use of the OEM header pipes and their heat shields •Made in the U.S.A. PART # V17913

DESCRIPTION For 02-07 VRSCA/AW/B/SE/X V-Rod models (w/ 180mm rear tire)

WHEELS & AXLES SUG. RETAIL $624.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

349


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

V21869

SOFTAIL DUALS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

•Give your Softail the nostalgic look of true duals •21/8” 220° full-coverage headpipe heat shields and 21/2” slip-on heat shields make the system virtually blue-proof •The Slip-ons give the performance and sound you would expect with standard louver core baffles •Enhance the nostalgic look of a Springer Softail or any other Softail model •Feature matched straight-cut billet tips •New flat plane mounting panel for the 12mm oxygen sensors now featured across the 12-13 Softail/Dyna model lines; mounting panel positions sensor deeper into exhaust stream, providing enhanced data feedback to the ECM •Made in the U.S.A.

1802-0011

1802-0012

NOTE: Pre-07 applications will require O2 sensor port plug kit PART #1861-0464.

ELECTRICAL

PART # 1800-1486 1800-1304

DESCRIPTION For 12-13 FXS/FLS/FLST models For 97-11 FXS/FXST/FLST models (except FXCW/FXCWC/FXSTSSE)

SUG. RETAIL $704.95 699.95

PART # V21869 1802-0012 1802-0011

DESCRIPTION Quiet baffle (ea.) Opt. Fishtail II end caps (pr.) Opt. slash billet end caps (pr.)

SUG. RETAIL $29.95 169.95 89.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1800-1129

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

350

1800-1219

WIDOW XR 2-1-2 SYSTEM •There’s no better way to squeeze out the full potential of the XR’s high-output motor than with the Vance & Hines Widow XR •Employs performance tuned headers with a Power Chamber crossover and twin 31/2” high-flow mufflers •Yields solid power gains and adds a menacing growl that’ll make riders feel like they’re at PART # DESCRIPTION the grand nationals FOR 09-12 XR1200 MODELS •Race-quality black ceramic coat or Limited 1800-1129 Black Edition Stainless Steel version 1800-1219 Limited Edition Stainless Steel •Optional quiet baffle lowers sound 2-4 db 1861-0620 Opt. quiet bafffle (ea,) •Made in the U.S.A.

1861-0620

SUG. RETAIL $649.95 1,029.95 32.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

1800-1131

GASKETS & SEALS ELECTRICAL

LIGHTING 1800-1132

HANDLEBARS, CONTROLS & MIRRORS 1802-0011

CABLES

1861-0573 V21869

BRAKES

1802-0012

BIG SHOT DUALS •The ultimate complete system for late-model touring machines •Armed with full-coverage, 220°-wrap, 21/2” heat shields that are essentially blue-proof for long-lasting style •Heat shields surround 13/4” headpipes that flow into 21/8” muffler bodies •True 2-into-2 system eliminates factory crossover and provides a clean, classic dresser look down both sides of the bike •Specially tuned baffles produce the deep Vance & Hines exhaust note with optional quiet baffles also available •Superior fit and an unrivaled finish when compared to other systems •Meticulously finished with straight-cut billet end caps •Optional billet slash-cut end caps or the most unique Fishtail II end caps also available •Removable baffles and all mounting hardware included •Black systems feature full coverage heat shields coated with a race-quality black ceramic contrasted with a signature chrome badge and end tips •Conversion kit includes grommet and mounting rail required to convert 10 FLTRX/FLHX models with factory 2-into-1 exhaust to Big Shot Duals, Dresser Duals or Power Duals •Made in the U.S.A. PART # CHROME 1800-12141 1800-1131 1800-0466 1800-0155 BLACK 1800-1132 1800-0747

DESCRIPTION For For For For

10-13 FLHT, FLHR, FLHX, FLTR 09 FLHT, FLTR, FLHX, FLHR 07-08 FLHT, FLTR, FLHX, FLHR 95-06 FLT, FLHT, FLHX, FLTR, FLHR

For 09 FLHT, FLTR, FLHX, FLHR For 07-08 FLHT, FLTR, FLHX, FLHR

SUG. RETAIL $709.95 709.95 709.95 689.95 847.95 814.95

PART # DESCRIPTION SUG. RETAIL CONVERSION MOUNT KIT 1861-0573 For 10 FLTRX/FLHX models with factory 2-into-1 exhaust $19.95 REPLACEMENT/OPTIONAL END CAPS/BAFFLE 1802-0011 Slash billet end caps (pr.) 89.95 1802-0012 Fishtail II end caps (pr.) 169.95 V21869 Optional quiet baffle (ea.) 29.95 1

10 FLTRX/FLHX require conversion mount kit PART #1861-0573.

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

351


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

352

STAINLESS HI-OUTPUT DUALS •Engineered for high output engine modifications •Dyno developed and tested to increase volumetric efficiency critical to extracting maximum horsepower from high output engine modifications •Matches tapered headpipes with larger inlet mufflers •13/4” to 2” tapered headpipes with 2” inlet on mufflers and 4” to 41/2” stepped muffler body •3” to 31/4” baffle with anti-reversion cone •All stainless steel construction with TIG welding and race-inspired brushed stainless “Works” finish •Contoured laser-cut heat shields •Flat plane 12mm and quick access 18mm oxygen sensor ports for wideband tuning capability •Made in the U.S.A. PART # 1800-1492

DESCRIPTION For 09-13 FLT, FLHT, FLHR, FLHX, FLTR models

SUG. RETAIL $1,749.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST 1802-0260 w/ 1801-0606 mufflers

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS 1802-0261 w/ 1801-0393 mufflers

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS

1802-0260

POWER DUALS •Power Duals is the ticket to style, quality and performance •More than just individual head pipes, Power Duals integrates an exclusive Vance & Hines Power Chamber hidden behind a contoured heat shield that generates more horsepower and torque than stock •Systems include 220° full-coverage header pipe heat shields •This new right side design eliminates the heat issues on the left side for the passenger, routing hot exhaust gases below the footpeg and protecting vital engine components and side covers from heat damage •Allows the use of any 09-13 OEM style mufflers •Conversion kit includes grommet and mounting rail required to convert 10 FLTRX/FLHX models with factory 2-into-1 exhaust to Big Shot Duals, Dresser Duals or Power Duals •Adapter kit extends Power Duals head pipes to allow installation on H-D FL Trike models •Made in the U.S.A. PART # CHROME 1802-0260 1802-0085 BLACK 1802-0261

DESCRIPTION

SUG. RETAIL

For 10-13 FLHT, FLHX, FLHR, FLTR models For 09 FLHT, FLHX, FLHR, FLTR models

$519.95 519.95

For 10-13 FLHT, FLHX, FLHR, FLTR models

599.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS 1802-0129

FOOTRESTS & LICENSE PLATE FRAMES

1861-0573

PART # DESCRIPTION CONVERSION MOUNT KITS 1861-0573 For 10 FLTRX/FLHX models with factory 2-into-1 exhaust 1802-0129 For 09-13 H-D FL Trike models

SUG. RETAIL

$19.95 79.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

353


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

1802-0086 Left side

LUGGAGE SEATS & SISSY BARS EXHAUST

1802-0204 w/1801-0391 mufflers

1802-0086 w/1801-0311 mufflers

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

1802-0259 Left side

GASKETS & SEALS ELECTRICAL

1802-0259 w/1801-0312 mufflers

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES 1802-0205 w/1801-0312 mufflers

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

354

1802-0087 w/1801-0312 mufflers

DRESSER DUALS •Independent 13/4” header pipe system for maximum performance •Include 220° full-length 21/8” heat shields •Allow the use of any 95-13 OEM-style mufflers •Perfect complemeant to the Vance & Hines Slip-on mufflers (sold separately) •Available in chrome or black ceramic finish •Conversion kit includes grommet and mounting rail required to convert 10 FLTRX/FLHX models with factory 2-into-1 exhaust to dual systems •Adapter kit extends Dresser Dual head pipes to allow installation on H-D FL Trike models •Made in the U.S.A. PART # CHROME 1802-0258 1802-0086 1802-02041 BLACK 1802-0259 1802-0087 1802-02051

DESCRIPTION

SUG. RETAIL

For 10-13 FLTR, FLHR, FLHT, FLHX models For 09 FLTR, FLHR, FLHT, FLHX models For 95-08 FLT, FLTR, FLHR, FLHT, FLHX models

$439.95 439.95 439.95

For 10-13 FLTR, FLHR, FLHT, FLHX models For 09 FLTR, FLHR, FLHT, FLHX models For 95-08 FLT, FLTR, FLHR, FLHT, FLHX models

519.95 519.95 479.95

1802-0129 1861-0573

PART # DESCRIPTION CONVERSION MOUNT KIT 1861-0573 For 10 FLTRX/FLHX models with factory 2-into-1 exhaust 1802-0129 For 09-13 H-D FL Trike models 1

SUG. RETAIL

$19.95 79.95

Non sensor applications will require sensor port plug kit PART #1861-0464.

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING

DELUXE SLIP-ON MUFFLERS •Designed exclusively for the Harley-Davidson Tri Glide Ultra Classic and Street Glide Trikes •Slip-on mufflers yield significant improvements in both performance and ground clearance over the stock slip-on mufflers •Finished with a classy oval-shaped, stainless steel rolled-end treatment, mufflers are tuned for a deep and mellow exhaust note that’s perfect for listening to the stereo while cruising the interstate PART # 1801-0498

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

DESCRIPTION For 09-13 H-D FL Trike models

SUG. RETAIL $579.95

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1801-0392

1801-0391

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

1861-0593

1801-0400

BRAKES

1801-0390

TWIN SLASH SLIP-ON MUFFLERS

TANKS & OIL FILTERS

1861-0700

•This series of slip-on mufflers for touring models incorporates THE best of Vance & Hines and redefines performance, looks and price with a distinctive style and unmistakable sound that is only available here •Rounds offer a large 4-inch diameter muffler body with an all-mechanical straight through louvered baffle •Ovals are available in either a 41/2” version with an all-mechanical straight-through louvered baffle for generating power gains with an aggressive exhaust note or 51/2” “Monster” version which has won over touring riders across the country with their power gains and perfect sound •2-into-1 version was designed specifically to work with the new 2-into-1s on 10 Road Glide and Street Glide; features a large 4-inch, stepped to 41/2”, muffler body that uses an all new maintenance-free baffle that also minimizes heat discoloration and provides the perfect blend of sound and power gains •All feature the new signature Twin Slash end treatment •Sold in pairs unless noted •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT/FLHT/FLHX/FLHR/FLTR AND H-D FL TRIKE MODELS 1801-0392 Rounds, 4” $399.95 1801-0391 Ovals, 41/2” 539.95 1 1801-0390 Oval Monsters, 5 /2” (except H-D FL Trike models) 629.95 FOR 10 FLTRX/FLHX MODELS 1801-0400 Round 41/2” (ea.) 249.95

PART # DESCRIPTION OPTIONAL COMPONENTS 1861-0593 Opt. quiet insert (requires baffle mods) for Rounds 4” PART #1801-0382 (ea.) 1861-0700 Opt. quiet insert (requires baffle mods) for Ovals 41/2” PART #1801-0391 (ea.)

SUG. RETAIL

$21.95 39.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

355


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

EPA COMPLIANT TWIN SLASH SLIP-ON MUFFLERS •Distinguished by its EPA compliance stamping on the topside of the muffler, the EPA Compliant Twin Slash Slip-on mufflers are 50-state compliant when used on stock 96-cubic-inch displacement 09 and later Harley-Davidson Touring models equipped with stock 2-1-2 dual exhaust headers •Specially developed for compliance with Federal EPA noise regulations •Feature full-coverage heat shields for blue-proof protection and sport the signature Vance & Hines Twin Slash, 5.5” wide, oval tips •Sold in pairs •Made in the U.S.A. PART # 1801-0422

DESCRIPTION For 09-11 FLHT, FLHX, FLHR and FLTR (except 10 FLHX/FLTRX)

SUG. RETAIL $679.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1801-0606

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

356

1801-0607

41/2” HI-OUTPUT SLIP-ON MUFFLERS •Designed specifically to address the needs of tuned motors built for high horsepower applications (high compression, large displacement, big cams) •Every aspect is singularly focused to yield maximum horsepower by improving the volumetric efficiency of heavily modified engines as well as stock •Race quality black ceramic or chrome •Compatible with Dresser duals, Power Duals and CVO drop skirt bags •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT/FLHT/FLHX/FLHR/FLTR MODELS (PR.) 1801-0606 Chrome $649.95 1801-0607 Black 699.95 FOR 10 FLTRX/FLHX W/ 2-INTO-1 (EA.) 1801-0399 Chrome 324.95 OPTIONAL BAFFLES 1861-0606 Quiet baffle (ea.) 28.95

1801-0399 1861-0606

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

4 “ BLACKOUT ROUND SLIP-ON MUFFLERS •For the rider who commands a menacing presence •Coated with a durable high-temperature black ceramic finish, also include matte black CNC-machined end caps and matching Vance & Hines black riveted badges •For a completely blacked out look, add the Vance & Hines Dresser Duals in black •Compatible with CVO drop skirt bags PART # •Sold in pairs 1801-0393 •Made in the U.S.A.

FUEL/AIR SYSTEMS DESCRIPTION For 95-13 FLT, FLHT, FLHX, FLHR, FLTR and H-D FL Trike

SUG. RETAIL $449.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1801-0396

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1801-0298

FRAMES, SUSPENSION & FENDERS

31/2” WIDOW SLIP-ON MUFFLERS •Treading deeper into the dark, Vance & Hines introduces Widow slip-on mufflers •Slip-on mufflers carry the signature look of the Vance & Hines Black line; race quality black ceramic coating with machined billet end caps and riveted Vance & Hines badge in chrome •The striking opposition of black and chrome makes a bold statement, enhancing the appeal of a Street Glide or any custom bagger, especially when matched with new Vance & Hines Dresser Duals Black •Night Rod version bestows some instant street cred with the same bold black and chrome combination to highlight this dark custom •Sold in pairs •Made in the U.S.A. PART # 1801-0396

DESCRIPTION For 95-13 FLHT, FLHX, FLTR, FLHR and H-D FL Trike models

SUG. RETAIL $619.95

PART # 1801-0298

DESCRIPTION For 06-13 VRSCD, VRSCDX and VRSCR models

SUG. RETAIL $509.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

357


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

Oval end caps

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

1801-0311 1801-0310

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES 1801-0312

TANKS & OIL FILTERS 1801-0395

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

358

MONSTER SLIP-ON MUFFLERS •51/2” Monster Ovals crush the old saying that more power requires more noise •The ovalized mufflers give Monster Ovals twice the internal volume of other slip-on mufflers for better flow and more power •4” Monster Rounds offer the same perfection in and performances as the Monster Ovals •Stereo-friendly, Monster Mufflers yield a deep rich tone that’s perfect for those cross-country tours •Encased in full-coverage one-piece formed heat shields with machined end caps in chrome or black, riders will be proud to show off their pipes wherever the road takes them •Sold in pairs •Made in the U.S.A. MONSTER OVALS PART # DESCRIPTION FOR 95-13 FLT/FLHT/FLHX/FLHR/FLTR MODELS 1801-0311 Chrome w/ chrome tips 1801-0310 Chrome w/ black tips 1801-0312 Black w/ chrome tips

Round end caps

MONSTER ROUNDS SUG. RETAIL $779.95 759.95 869.95

PART # DESCRIPTION FOR 95-13 FLT/FLHT/FLHX/FLHR/FLTR MODELS 1801-0395 Chrome w/ chrome tips

SUG. RETAIL $649.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

ROUND SLIP-ON MUFFLERS •One-of-a-kind “blue-proof” slash-cut, 4” tapered megaphone design for long-lasting looks •They don’t just look good, they are designed to perform •Slip-on design for easy installation •Dyno-tuned baffles and all mounting hardware included •Sold in pairs •Made in the U.S.A. PART # 1801-0182

DESCRIPTION For 95-13 FLT, FLHT, FLHX, FLTR, FLHR and H-D FL Trike models

LUGGAGE SEATS & SISSY BARS

SUG. RETAIL $389.95

EXHAUST FUEL/AIR SYSTEMS

1861-0571

ENGINE TRANSMISSION & DRIVELINE

1861-0570

3” FISHTAIL SLIP-ON MUFFLERS •The ultimate in Fishtail design features massive non-blueing 21/2” diameter full-length heat shields with 220° of coverage •Finishing off each muffler are beautifully sculpted Fishtail II tips •Beneath the meticulously polished chrome are 3” muffler bodies with louvered core baffles •Sold in pairs •Made in the U.S.A. PART # 1801-0401 1861-0571 1861-0570

1801-0401

DESCRIPTION For 95-13 FLT, FLHT, FLHX, FLTR, FLHR models 1.5” quiet baffle (ea.) 2.5” competition baffle (ea.)

SUG. RETAIL $499.95 29.95 29.95

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES V23068

1861-0603

V22897

TANKS & OIL FILTERS

4” CLASSIC TURN DOWN SLIP-ON MUFFLERS •High-volume, chrome slip-ons provide substantial power increases, improved fuel economy and crisper throttle response •All Classics provide the perfect sound from your Big Twin; not too loud, definitely not too quiet, and the baffles are removable •Systems include all necessary hardware and mounting instructions for a hassle-free, perfect fit every time •Optional quiet insert, requires baffle modifications, available separately •Sold in pairs •Made in the U.S.A. PART # 1801-0394

DASHES & GAUGES

DESCRIPTION For 95-13 FLT, FLHT, FLHX, FLHR, FLTR and H-D FL Trike models

END CAPS AND BAFFLE FOR DRESSER MUFFLERS PART # DESCRIPTION V23068 End cap for straight-cut mufflers PART #V16721 (ea.) V23069 End cap for slash-cut mufflers PART #V16719 (ea.) 1861-0603 Opt. quiet insert (requires baffle mods) for PART #1801-0394 (ea.)

SUG. RETAIL $99.95 87.95

FRAMES, SUSPENSION & FENDERS

1801-0394

PART # V21274 V22897

DESCRIPTION Repl. baffle for PART #s V16723, V16721, V16719 (ea.) Repl. end cap O-ring (ea.)

SUG. RETAIL $499.95

SUG. RETAIL $17.95 7.95

14.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

359


SECTION

6

WINDSHIELDS & FAIRINGS TOURING TWIN SLASH 2-INTO-1 SLIP-ON MUFFLER •Designed specifically to work with the new 2-into-1 for the 2012 Dyna Switchback •Chrome slip-on features a large 4” muffler body with Vance & Hines’ signature twin slash end treatment •Uses an all new maintenance-free baffle that also minimizes heat discoloration •Twin Slash 2-into-1 slip-on gives you the perfect blend of performance and sound •Made in the U.S.A.

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

PART # 1801-0576

DESCRIPTION For 12-13 FLD

SUG. RETAIL $249.95

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

1801-0384

ELECTRICAL

1801-0552

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES 1801-0404

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

1801-0402

3” ROUND TWIN SLASH SLIP-ON MUFFLERS

FOOTRESTS & LICENSE PLATE FRAMES

PART # CHROME 1801-0384

WHEELS & AXLES

1801-0552 1801-0386 1801-0388

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

360

1861-0571

•Feature muffler bodies shielded by full-coverage heat shields for a blue-proof look •Increased performance with a throaty growl •Include standard louvered core baffles •Sold in pairs •Made in the U.S.A. DESCRIPTION

1861-0570 SUG. RETAIL

For 07-13 FXST/FLST, 10-13 FLSTSE, 08-11 FXCW/C (except FXSTD/FLSTSB/FLSTF/FLSTN) For 11-13 FXS Blackline For 07-13 FLSTF, 07 FXSTD For 07-13 FLSTN, 08-13 FLSTSB

$324.95 325.95 324.95 324.95

PART # DESCRIPTION CHROME (CONT) 1801-0404 For 91-13 Dyna (except 10-13 FXDWG and 08-13 FXDF, 12 FLD) 1801-0406 For 08-13 FXDF, 10-13 FXDWG 1801-0402 For 04-13 XL models

SUG. RETAIL

PART # 1861-0571

SUG. RETAIL $29.95

$324.95 324.95 324.95

REPL./OPTIONAL BAFFLES PART # 1861-0570

DESCRIPTION 2.5” competition baffle (ea.)

SUG. RETAIL $29.95

DESCRIPTION 1.5” quiet baffle (ea.)

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS

3” ROUND TWIN SLASH SLIP-ON MUFFLERS (CONT)

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS 1801-0385

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

1801-0553

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES 1801-0405 1801-0403

1861-0571

1801-0553 1801-0387 1801-0389

DESCRIPTION

SUG. RETAIL

For 07-13 FXST/FLST, 10-13 FLSTSE, 08-11 FXCW/C (except FXSTD/FLSTSB/FLSTF/FLSTN) For 11-13 FXS Blackline For 07-13 FLSTF, 07 FXSTD For 07-13 FLSTN, 08-13 FLSTSB

PART # BLACK (CONT) 1801-0405

DESCRIPTION

$399.95 399.95 399.95 399.95

1801-0407 1801-0403

For 91-13 Dyna (except 10-13 FXDWG and 08-13 FXDF, 12 FLD) For 08-13 FXDF, 10-13 FXDWG For 04-13 XL models

SUG. RETAIL $29.95

PART # 1861-0571

DESCRIPTION 1.5” quiet baffle (ea.)

SUG. RETAIL

$399.95 399.95 399.95

REPL./OPTIONAL BAFFLES PART # 1861-0570

DESCRIPTION 2.5” competition baffle (ea.)

SUG. RETAIL $29.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

1861-0570 PART # BLACK 1801-0385

TANKS & OIL FILTERS

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

361


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

1800-1494 1800-1498

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL 1800-1496 1800-1499

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES 1800-1495

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

362

COMPETITION SERIES 2-INTO-1 EXHAUST •Available in brushed stainless steel or black ceramic powder-coated stainless steel to provide significant weight savings over stock •Stepped headpipes and full merge collector for maximum performance •Tuned length megaphone •Slip fit collector joints with two dual swivel end retention springs •Racepack EGT fittings in both headpipes •Includes O2 sensor port plugs for non-sensor applications •Flat plane 12mm and quick access 18mm oxygen sensor ports for wideband tuning capability •Designed and made in the U.S.A.

1800-1497

1861-0605

NOTE: PART #s 1800-1060, 1800-1061, 1800-1062, 1800-1063 are not designed for use with OEM saddlebags. PART # DESCRIPTION BRUSHED STAINLESS STEEL 1800-1498 For 00-13 FXS/FXST/FLST models (except 09 FXSTSSE) 1800-1502 For 06-13 Dyna Glide models (except FLD) 1800-1500 For 04-13 XL models 1800-1494 For all 02-13 VRSC V-Rod models (except 06-08 VRSCR, 09-11 VRSCF) 1800-1496 For 09-13 VRSCF V-Rod Muscle

SUG. RETAIL

$784.95 773.95 749.95 754.95 805.95

PART # DESCRIPTION BLACK CERAMIC POWDER-COAT STAINLESS STEEL 1800-1499 For 00-13 FXS/FXST/FLST models (except 09 FXSTSSE) 1800-1503 For 06-13 Dyna Glide models (except FLD) 1800-1501 For 04-13 XL models 1800-1495 For all 02-13 VRSC V-Rod models (except 06-08 VRSCR, 09-11 VRSCF) 1800-1497 For 09-13 VRSCF V-Rod Muscle OPTIONAL BAFFLES 1861-0605 Quiet baffle (ea.)

SUG. RETAIL

$914.95 910.95 875.95 906.95 938.95 $23.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE 1801-0281

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

COMPETITION SERIES SLIP-ON MUFFLERS •Designed specifically to provide the ultimate sound and performance for stock and big engines •21/2” stainless steel performance cores with billet CNC-machined end caps •Race tuned for maximum power and torque with a deep unique tone •Durable, black ceramic powder-coat finish •For use with stock headers or Vance & Hines True Dual Headers •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR MODELS 1801-0281 Slip-on mufflers $656.95

ENGINE

PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR MODELS (CONT) 1861-0605 Quiet baffle (ea.) $23.95

TRANSMISSION & DRIVELINE 1861-0605

GASKETS & SEALS ELECTRICAL

LIGHTING COMPETITION SERIES SLIP-ON MUFFLERS

HANDLEBARS, CONTROLS & MIRRORS

•Quality lightweight construction; weighs only 14 pounds •Durable “Aluminum Oxide” finish, an exact match to the OEM heat shields •Tuned length provides increased horsepower •Baffles included •Fuel maps available •Improved ground clearance •Sold in pairs •Designed and made in the U.S.A. PART # DESCRIPTION FOR 09-13 VRSCF V-ROD MUSCLE 1801-0343 Slip-on mufflers

CABLES 1861-0605 1801-0343

SUG. RETAIL $599.95

PART # DESCRIPTION FOR 09-13 VRSCF V-ROD MUSCLE (CONT) 1861-0605 Quiet baffle (ea.)

BRAKES SUG. RETAIL $23.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

SS2-R SYSTEM

WHEELS & AXLES

•Replaces the entire stock exhaust system •Aluminum SS2-R muffler is lighter than stock and increases performance •Made in the U.S.A. PART # V16535

DESCRIPTION For 00-06 Buell Blast models

SUG. RETAIL $229.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

363


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

1800-1560

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS 1800-1561

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

364

RSD SLANT 2-INTO-1 EXHAUST SYSTEMS •All stainless steel construction with carbon fiber end caps available in two finishes •Works Stainless/Carbon features a brushed stainless finish •Carbon Ops version features features a lightweight Gloss Carbon and Satin Black design that is dipped in the Black Ceramic for the toughest possible finish •All TIG welded with 18mm O2 sensor bungs; O2 plugs are not included but are available here in the EXHAUST SECTION if needed •Two step header pipes; 1.75” to 2.0” •Includes heat shields for rear cylinder and collector inlet, also includes exhaust port gaskets PART # DESCRIPTION SUG. RETAIL •Fiberglass and stainless steel wool baffle materials for high temperature resistance FOR 04-13 XL MODELS •Muffler body measures; 17” L x 10” W x 6” D 1800-1560 Stainless steel $895.95 •Includes mounting hardware and instructions 1800-1561 Carbon Ops 995.95 •Optional “DB Killer” sound insert provides a more toned down exhaust note 1861-0830 Opt. DB Killer sound insert 69.95 •Made in the U.S.A. We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

1800-0667 1800-0998

FUEL/AIR SYSTEMS

RSD TRACKER 2-INTO-1 EXHAUST SYSTEM™ •Roland Sands Design has teamed up with Vance & Hines to introduce a stylized, black ceramic 2-into-1 exhaust system •The RSD Tracker 2-into-1 Exhaust System™ fuses RSD styling and design with Vance & Hines racing performance •Beautifully hand-welded 2-into-1 headpipes boast a race-quality, high-temperature black ceramic coating •Carefully detailed and drilled chrome heat shields are minimalist and sleek •A chrome billet drilled exhaust tip with the RSD mark adds the PART # DESCRIPTION perfect finishing touch 1800-06671 For 07-11 FXS/FXST/FLST models (except •Manufactured from beginning to end by 08-11 FLSTB w/ OEM air cleaner, 09 FXSTSSE) Vance & Hines in Southern California 1 1800-0998 For 04-13 XL models NOTE: Not for use on models with saddlebags.

1

NOTE: Not for use with passenger footpegs.

ENGINE

SUG. RETAIL $779.95 779.95

Pre 07 models will require O2 sensor port plug kit PART #1861-0464 (sold separately).

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES 1800-1268 Left side

BRAKES TANKS & OIL FILTERS

1800-1019

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES 1800-1268 Right side

RSD TRACKER DUALS •RSD Tracker Duals begin with high-temp, black ceramic-coated headpipes that are contrasted with show-quality, chrome-plated Tracker-style heat shields for the signature RSD Contrast look •Headpipes are compatible with any 95-08 V&H or H-D slip-on muffler and are also the perfect match for the RSD Tracker Slip-on mufflers •Made in the U.S.A.

PART # 1800-1019 1800-1268

DESCRIPTION For 07-08 FLHT, FLTR, FLHX, FLHR models For 95-06 FLT, FLHT, FLTR, FLHX, FLHR models

WHEELS & AXLES SUG. RETAIL $598.95 599.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

365


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1800-1313

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING

1800-1314

PYTHON® THROWBACKS •13/4” dual-wall headpipes flow into 21/8” muffler bodies to create an aggressive throaty sound •System arrives completely wrapped and ready to ride with gray exhaust wrap and stainless steel zip ties pre-installed •Feature 21/2” straight-cut billet end accents that showcase the Python logo •Made in the U.S.A. PART # 1800-1479 1800-13141 1800-1480 1800-1313 1800-13121 V21869 1

DESCRIPTION For 12-13 FXS/FLS/FLST For 86-11 FXST/FLST models (except 09 FXSTSSE) For 12-13 Dyna models (except 12-13 FLD) For 06-11 Dyna models (except 12-13 FLD) For 04-13 XL models Opt. quiet baffle (ea.)

SUG. RETAIL $504.95 499.95 504.95 499.95 499.95 29.95

1800-1312

Pre 07 models will require O2 sensor port plug kit PART #1861-0464 (sold separately).

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS 1800-1311 Left side

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

366

FISHTAIL DUALS •True dual system with 15/8” headpipes wrapped in 21/4” heat shields that flow into extra-long 21/8” mufflers under full coverage 21/2” heatshields •Show-quality chrome finish •Feature classic fishtail tips for a stylish lowrider-style Softail •Made in the U.S.A. PART # 1800-14811 1800-13111 1

DESCRIPTION For 12-13 FXS/FLS/FLST For 97-11 FXST/FLST (except 09 FXSTSSE)

1800-1311 Right side

SUG. RETAIL $804.95 799.95

Pre 07 models will require O 2 sensor port plug kit PART #1861-0464 (sold separately).

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST 1800-0469

FUEL/AIR SYSTEMS ENGINE 1800-0241

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1681-0477

V21869

HANDLEBARS, CONTROLS & MIRRORS

DS-210449 7808-4002 7808-4001

CABLES

STAGGERED DUALS EXHAUST SYSTEMS •Developed and tested to increase performance throughout the entire rpm range •Headpipes are 13/4” and flow into 21/4” muffler bodies •Hidden crossover system improves scavenging for more horsepower and better sound •Come complete with full-coverage, full-length heat shields for a virtually blue-proof appearance •With heat shields installed, pipes have a burly 21/2” look •Replacement front and rear heat shields available; sold separately •Feature an embossed Python logo on rear pipe and removable baffles •All required mounting hardware and instructions are included •Made in the U.S.A.

BRAKES

Hidden crossover

1800-1472

DESCRIPTION For 12-13 FXS/FLS/FLST models For 86-11 FXS/FXST/FLST models (except 09 FXSTSSE) For 12-13 Dyna models (except 12-13 FLD)

SUG. RETAIL $518.95 518.95 518.95

TANKS & OIL FILTERS DASHES & GAUGES

NOTE: Pre 07 FXST/FLST models will require O2 sensor port plug kit PART #1861-0464 (sold separately). PART # 1800-1471 1800-0469

LIGHTING

Embossed logo PART # 1800-0241 DS-210449 1861-0477 V21869

DESCRIPTION For 06-11 Dyna models For 91-05 Dyna models Repl. baffle (ea.) Quiet baffle (ea.)

SUG. RETAIL $535.95 499.95 28.95 29.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

REPLACEMENT HEAT SHIELDS/BAFFLES PART # 1861-0355 1861-0356 1861-0323 1861-0324

DESCRIPTION Repl. front heat shield for PART #1800-0241 Repl. rear heat shield for PART #1800-0241 Repl. front heat shield for PART #1800-0469 and DS-210448 Repl. rear heat shield for PART #1800-0469 and DS-210448

SUG. RETAIL $149.95 128.95 164.95

PART # 7808-4001 7808-4002 1861-0477 V21869

DESCRIPTION Repl. front heat shield for PART #DS-210449 Repl. rear heat shield for PART #DS-210449 Repl. baffle (ea.) Quiet baffle (ea.)

SUG. RETAIL $159.95 137.95 28.95 29.95

169.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

367


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1800-0493

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS 1800-0274

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES

1861-0494

TANKS & OIL FILTERS 1861-0665

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

368

1800-0494

2-INTO-1 EXHAUST SYSTEMS •Hefty 21/8” 220° full-coverage headpipe heat shields •One-piece collector heat shield •Beautiful 31/2” muffler with custom scalloped, slash-cut end tip •Removable baffle and mounting hardware included •Made in the U.S.A. PART # 1800-04931 1800-0274 1800-04941 1861-0494

DESCRIPTION SUG. RETAIL For 86-11 FXS/FXST/FLST models (except 09 FXSTSSE) $485.95 For 06-11 Dyna models 485.95 For 04-13 XL models 485.95 Repl. baffle for PART #s 1800-0493/1800-0274/1800-0019 42.95

PART # 1861-0665 1

DESCRIPTION Repl. baffle for PART #s 1800-0494/1800-0089

SUG. RETAIL $44.95

Pre 07 models will require O2 sensor port plug kit PART #1861-0464 (sold separately).

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1800-1202

EXHAUST 1800-0740

FUEL/AIR SYSTEMS VENOM RADIUS

ENGINE

•Distinctive curves that are unforgettable •100% blue-proof with one-piece 21/2” 220° coverage heat shields with slash-cut ends for added style •Louvered core baffles deliver the big Python® sound; all at an incredible Python® value •Made in the U.S.A. PART # CHROME 1800-07401 1800-1202 BLACK 1800-12341 1

DESCRIPTION

TRANSMISSION & DRIVELINE

SUG. RETAIL

For 86-11 FXS/FXST/FLST models For 06-11 Dyna models

$599.95 599.95

For 86-11 FXS/FXST/FLST models

674.95

GASKETS & SEALS

1800-1234

ELECTRICAL

Pre 07 FXST/FLST models will require O2 sensor port plug kit PART #1861-0464 (sold separately).

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1802-0257

CABLES

BRAKES TRUE DUAL HEADERS •Complete a touring model exhaust system 1802-0257 with True Duals w/1801-0409 mufflers •Whether the bike already has a set of ® Python mufflers or is still running stock, True Duals will dramatically increase power and cut down the heat the stock crossover system generates on the right side •21/2” 220° full-coverage heat shields make this a blue-proof system •13/4” headpipes give the sound and performance you want •PART #1802-0257 accepts 09-13 OEM-style mufflers, PART #1800-0742 accepts 95-13 OEM-style mufflers •Conversion kit is required to mount systems on 10 FLHX/FLTRX with factory 2-into-1 exhaust systems •Adapter kit will extend True Dual headers for use on FL Trike models •Made in the U.S.A.

TANKS & OIL FILTERS 1800-0742 w/ 1801-0410 mufflers

PART # 1802-0257 1800-0742 1861-0573 1802-0129

FRAMES, SUSPENSION & FENDERS

1800-0742

NOTE: See new Python website, www.pythonperformance.com, for more details on the complete Python exhaust line. DESCRIPTION For 10-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models For 07-08 FLHT, FLHR, FLHX and FLTR models Conversion kit for 10 FLHX/FLTRX models models with factory 2-into-1 exhaust Adapter kit for 09-13 H-D FL Trike models

FOOTRESTS & LICENSE PLATE FRAMES 1802-0129 SUG. RETAIL $429.95 399.95 19.95 79.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

DASHES & GAUGES

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

369


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE 1801-0582

SEATS & SISSY BARS EXHAUST 1801-0583

FUEL/AIR SYSTEMS ENGINE Billet tip w/ engraved logo

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1801-0584

CABLES

BRAKES TANKS & OIL FILTERS

1801-0585

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

370

Angle cut tip can be rotated

4” SLIP-ON MUFFLERS WITH BILLET TIPS

•Large 4” diameter chrome muffler bodies •Innovative baffle technology features 2” baffles that provide free flowing exhaust •Baffles provide quiet idle and mellow cruising tones but more aggressive sound on demand, all with improved performance you can really feel •Custom machined billet exhaust tips are available in chrome or black finishes; both feature Python logo laser engraved for a unique and distinctive look •Angle Cut billet tips feature 30° angled radius ends that can be rotated on the mufflers bodies for rider’s preference of Slash-Up, or Slash-Down •Made in the U.S.A. PART # DESCRIPTION FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR MODELS 1801-0582 Straight cut, chrome 1801-0583 Straight cut, black

SUG. RETAIL $514.95 528.95

PART # DESCRIPTION FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR MODELS (CONT) 1801-0584 Angle cut, chrome 1801-0585 Angle cut, black

SUG. RETAIL $547.95 557.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1801-0377

ENGINE

1801-0376 1861-0568

TRANSMISSION & DRIVELINE GASKETS & SEALS PREDATOR 31/2” SLIP-ON MUFFLERS •The latest top-shelf offering in the Python exhaust line •Feature 281/2” overall length chrome bodies •Includes billet end tips with machined channels for a look of understated style •Aggressive exhaust note attests to the marked gains you’ll feel in torque and horsepower •Available in oval or round •Matched with Python True Dual Headers, Predator Slip-on Mufflers make the ultimate true dual system •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE MODELS (EXCEPT 10 FLHX/FLTRX) 1801-0377 Oval w/ chrome end tips 1801-0376 Round w/ chrome end tips 1801-0437 Round w/ black end tips OPTIONAL BAFFLES 1861-0568 2.5” competition baffle for PART #s 1801-0376, 1801-0377 (ea.) 1861-0569 1.5” quiet baffle for PART #s 1801-0376, 1801-0377 (ea.)

ELECTRICAL

LIGHTING 1801-0437

HANDLEBARS, CONTROLS & MIRRORS SUG. RETAIL

CABLES

$594.95 494.95 531.95 29.95 29.95

BRAKES CNC billet tip

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

VIPER 31/2” SLIP-ON MUFFLERS •Striking in both performance and value, Viper Slip-on Mufflers pack loads of torque and horsepower into a gorgeous slash-cut chrome muffler •Round muffler design produces a deep and menacing growl that will truly do justice for your big-inch twin •Matched with Python True Dual Headers, Viper Slip-on Mufflers make for a stunning true dual system •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1801-0375 For 95-13 FLT, FLHT, FLHX, FLTR, FLHR and H-D FL Trike models (except 10 FLHX/FLTRX) (pr.) $364.95 1861-0566 Opt. 2.5” competition baffle for PART #1801-0375 (ea.) 29.95 1861-0567 Opt. 1.5” quiet baffle for PART #1801-0375 (ea.) 29.95

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES 1801-0375 1861-0567

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

371


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

FISHTAIL 21/2” SLIP-ON MUFFLERS •Feature 21/8” muffler bodies wrapped in 21/2” chrome heatshields which match the OEM headpipe heatshields •Show-quality finish and style •Come standard with louvered core baffles or optional quiet baffles, sold separately •Match perfectly with Python True Dual headers or Vance & Hines Dresser Dual Headers for an ultimate system •Sold in pairs •Made in the U.S.A. PART # 1801-0522 1801-05251 V21869 1

1801-0522

DESCRIPTION For 09-13 FLHT, FLHX, FLHR, FLTR and H-D FL Trike models (except 10 FLHX/FLTRX) For 95-08 FLT, FLHT, FLHX, FLHR, FLTR models Optional quiet baffle (ea.)

SUG. RETAIL $499.95 499.95 29.95

V21869

Requires the use of Python True Duals or Vance and Hines Dresser Duals to ensure proper alignment and fitment.

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES 1801-0409

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

372

PYTHON® 31/2” SLASH-CUT SLIP-ON MUFFLERS •High-velocity shielded muffler cores offer protection from heat discoloration while producing outstanding performance gains •Feature the Python logo on the top of each muffler •Slash-cut ends for a great appearance; baffles are removable •Include instructions and all mounting hardware •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE MODELS (EXCEPT 10 FLHX/FLTRX) 1801-0409 Scalloped $335.95 1801-0410 Backslash 357.95

1801-0410

1861-0567 PART # DESCRIPTION OPTIONAL/REPLACEMENT BAFFLES 1861-0566 Optional 2.5” competition baffle for PART #s 1801-0409/1801-0410 (ea.) 1861-0567 Optional 1.5” quiet baffle for PART #s 1801-0409/1801-0410 (ea.) 1861-0495 Repl. baffle for PART #s DS-202344/1801-0183 (ea.)

1861-0495 SUG. RETAIL

$29.95 29.95 57.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS 1861-0571

TOURING AUDIO & COMMUNICATION

1861-0570

BLACK MAMBA 3” SLIP-ON MUFFLERS •21/2” muffler bodies are clad in 3” black ceramic heat shields and are finished with chromed billet tips and laser-cut Python custom name badges with heavy-gauge rivets •Black Mambas produce a nice deep rumble sound with optional competition and quiet baffles available separately •Sold in pairs •Made in the U.S.A. PART # 1801-0523

LUGGAGE SEATS & SISSY BARS

DESCRIPTION For 95-13 FLT, FLHT, FLHX, FLTR, FLHR and H-D FL Trike models (except 10 FLHX/FLTRX)

SUG. RETAIL $547.95

OPTIONAL BAFFLES PART # 1861-0570

DESCRIPTION 2.5” competition baffle (ea.)

SUG. RETAIL $29.95

PART # 1861-0571

DESCRIPTION 1.5” quiet baffle (ea.)

SUG. RETAIL $29.95

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1801-0378

1801-0382

1861-0570

BRAKES

MAMBA 3” SLIP-ON MUFFLERS •Blue-proof oversized slip-on mufflers for added performance and a deeper sound •Removable baffles with optional/replacement baffles also available separately •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION 1801-0378 For 07-13 FXST/B/C, FLST/C, 08-11 FXCW/C models 1801-0379 For 07-13 FLSTF models 1801-0380 For 07-13 FLSTN, 08-11 FLSTSB, 12-13 FLS models 1801-0382 For 91-13 FXD, 93-08 FXDWG models (except 08-13 FXDF, 10-13 FXDWG, 12-13 FLD) 1801-0381 For 08-13 FXDF, 10-13 FXDWG models 1801-0383 For 04-13 XL models OPTIONAL BAFFLES PART # DESCRIPTION 1861-0570 2.5” competition baffle (ea.) 1861-0571 1.5” quiet baffle (ea.)

CABLES

TANKS & OIL FILTERS

1861-0571

DASHES & GAUGES

SUG. RETAIL

FRAMES, SUSPENSION & FENDERS

$299.95 299.95

FOOTRESTS & LICENSE PLATE FRAMES

299.95

299.95 299.95 299.95

WHEELS & AXLES 1801-0383

SUG. RETAIL $29.95 29.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

373


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1801-0255

ENGINE TRANSMISSION & DRIVELINE

1801-0254

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1801-0256

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

374

21/2” SLASH-CUT SLIP-ON MUFFLERS

DS-202343

•Get the famous Python look and performance while still using the stock header pipes •Non-removable high-performance baffles •Brilliant chrome or black ceramic finish; all feature an embossed Python logo on each muffler •Come complete with all necessary mounting brackets and instructions •Sold in pairs •Made in the U.S.A. NOTE: Black headpipe heat shields are not included with black mufflers. PART # CHROME 1801-0255 1801-0254 1801-0256 DS-202343

DESCRIPTION For For For For

07-13 07-10 12-13 00-06

FLSTF models FXST/B/C, 07-13 FLSTC, 10-12 FLSTSE and 08-11 FXCW/C models FLS, 05-13 FLSTN, 08-11 FLSTSB models FXST, FLSTC models

SUG. RETAIL $249.95 249.95 249.95 229.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS

21/2” SLASH-CUT SLIP-ON MUFFLERS (CONT)

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

1801-0257

FUEL/AIR SYSTEMS

1801-0087

ENGINE PART # CHROME (CONT) 1801-0257 1801-0087

DESCRIPTION

SUG. RETAIL

For 91-13 Dyna Glide models (except 08-13 FXDF, 10-13 FXDWG, 12-13 FLD) For 04-13 XL models

$249.95 249.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES 1801-0469

BRAKES TANKS & OIL FILTERS

1801-0470

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES 1801-0471 PART # BLACk 1801-0469 1801-0470 1801-0471

DESCRIPTION

SUG. RETAIL

For 07-10 FXST/B/C, 07-13 FLSTC, 10-12 FLSTSE and 08-11 FXCW/C models For 91-13 Dyna Glide models (except 08-13 FXDF, 10-13 FXDWG, 12-13 FLD) For 04-13 XL models

$314.95 314.95 314.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

375


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1801-0177

EXHAUST

1801-0178

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL 1801-0179

LIGHTING

1801-0180

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS 1801-0128

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

376

1801-0127

3” SLIP-ON MUFFLERS •Chrome-plated mufflers •Features steel baffles that are wrapped with a special insulating blanket for less “crackle” in the exhaust tone •Available in slash-cut, slash-out or slash-down styles •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 07-10 FXST/B/C, 07-13 FLSTC, 08-11 FXCW/C 1801-0177 Slash-cut $268.95 1801-0178 Slash-down 268.95 FOR 07-13 FLSTF, FXSTD 1801-0179 Slash-cut 268.95

PART # DESCRIPTION FOR 07-13 FLSTF, FXSTD (CONT) 1801-0180 Slash-down FOR 00-06 FXST/B/C/S, FLST/C 1801-0127 Slash-out 1801-0128 Slash-down

SUG. RETAIL $268.95 268.95 268.95

PART # DESCRIPTION FOR 84-99 FXST, FLST/C 1801-0129 Slash-out FOR 00-06 FLSTF, FXSTD 1801-0133 Slash-out 1801-0134 Slash-down

SUG. RETAIL $326.95 268.95 268.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS

3” SLIP-ON MUFFLERS (CONT)

TOURING AUDIO & COMMUNICATION LUGGAGE

1801-0132 1801-0131

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

1801-0285

TRANSMISSION & DRIVELINE GASKETS & SEALS

1801-0283

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1801-0125 1801-0126

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1801-0121

1801-0122

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

PART # DESCRIPTION FOR 07-13 FLSTN, 08-11 FLSTSB 1801-0131 Slash-out 1801-0132 Slash-down FOR 08-13 FXDF, 10-13 FXDWG 1801-0283 Slash-down 1801-0285 Slash-out

SUG. RETAIL $268.95 268.95 275.95 275.95

PART # DESCRIPTION SUG. RETAIL FOR 91-13 FXD/FXDWG (EXCEPT 08-13 FXDF, 10-13 FXDWG, 12-13 FLD) 1801-0125 Slash-out $268.95 1801-0126 Slash-down 268.95 FOR 04-13 XL 1801-0121 Slash-out 275.95

PART # DESCRIPTION FOR 04-13 XL (CONT) 1801-0122 Slash-down FOR 86-03 XL 1801-0123 Slash-out 1801-0124 Slash-down

SUG. RETAIL $275.95 268.95 268.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

377


SECTION

6

WINDSHIELDS & FAIRINGS TOURING

1802-0105

AUDIO & COMMUNICATION

1802-0105 Right side

LUGGAGE 1802-0106

SEATS & SISSY BARS

1802-0105 Left side

EXHAUST FUEL/AIR SYSTEMS ENGINE

“DOUBLE BACK™” TRUE DUAL HEADER SYSTEMS •These are right off of Brian Klock’s “WFB” Discovery bike •Feature 13/4” front and rear header pipes with 21/4”, 220°-wrap heat shields •Accept 95-13 stock or aftermarket slip-on FLHT mufflers; check air cleaner clearance before installation •Headers include O2 sensor ports and are available with chrome or a mean black ceramic finish •Made in the U.S.A. NOTE: Headers will fit 10-13 models when used with 02 sensor bung adapter kits PART #s 1861-0608 or 1861-0594 (sold separately)

PART # DESCRIPTION SUG. RETAIL FOR 09 FLHT, FLHX, FLHR, FLTR MODELS 1802-0105 Chrome $529.95

PART # DESCRIPTION SUG. RETAIL FOR 09 FLHT, FLHX, FLHR, FLTR MODELS (CONT) 1802-0106 Black $574.95

TRANSMISSION & DRIVELINE GASKETS & SEALS Slash down

Slash out

ELECTRICAL

LIGHTING Slash 45˚ down/out

HANDLEBARS, CONTROLS & MIRRORS

Slash up w/ extensions

CABLES

BRAKES 1801-0327

TANKS & OIL FILTERS PLATINUM SERIES REVOLVER™ SLIP-ON MUFFLERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

378

•These 4” Slip-on Mufflers have a contoured slash-cut end which is adjustable to eight different positions (every 45 degrees) •Consistent with the Klock Werks exhaust and muffler line, these slip-on mufflers are not just another muffler adapted for use on touring/baggers – they are designed specifically for touring bikes and road use •The mufflers have a deep throaty rumble when profiling around town or under acceleration, but diminishes to a low hum under steady cruising – great for long trips •Proprietary baffle setup has been rigorously soundand performance-tested •The baffle extends to the front of the muffler body and actually clamps to the head pipe along with the body •Design allows exhaust gases to enter directly into the baffle and eliminates the hot spot discoloration that generally occurs mid-muffler or where the baffle traditionally starts inside of the muffler body •Provide long-lasting style without sacrificing performance •Sold in pairs •Made in the U.S.A.

Chrome w/ chrome end cap

Black w/ chrome end cap

Chrome w/black end cap

Black w/ black end cap

PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT/FLHT/FLHX/FLHR/FLTR MODELS (EXCEPT 10 FLHX/FLTRX) 1801-0327 Chrome w/ chrome end caps $599.95 1801-0328 Chrome w/ black end caps 605.95 1801-0326 Black w/ chrome end caps 643.95 1801-0325 Black w/ black end caps 647.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE 1801-0349 1801-0351 1801-0350

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1801-0411

1801-0413

1801-0412

ENGINE

SUPER SAVER 4” SLIP-ON MUFFLERS •Great value and style in big, 4” slip-on mufflers with rolled-edge ends in three different designs and two lengths •Standard versions measure approximately 30” L; short versions are 2” shorter at approximately 28” L •All steel construction with flawless chrome finish •Feature 2” spiral-louvered fiberglass-wrapped baffles that are removable and repackable •Throaty rumble at idle and under acceleration; decreases to a low hum under steady cruising •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT, FLHT, FLHX, FLHR, FLTR MODELS (EXCEPT 10 FLHX/FLTRX) 1801-0349 Straight-cut, standard $369.95 1801-0411 Straight-cut, short 369.95 1801-0350 Forward slash, standard 369.95

TRANSMISSION & DRIVELINE GASKETS & SEALS

PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT, FLHT, FLHX, FLHR, FLTR MODELS (EXCEPT 10 FLHX/FLTRX) (CONT) 1801-0412 Forward slash, short $369.95 1801-0351 Back slash, standard 369.95 1801-0413 Back slash, short 369.95

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS Chrome w/ polished end cap

Chrome w/ black end cap

CABLES

BRAKES

1801-0313 Shown w/ 1860-0250 (sold separately)

TANKS & OIL FILTERS Black w/ black end cap

Black w/ polished end cap

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

WFB™ 4” PERFORMANCE SLIP-ON MUFFLERS

1801-0315 Shown w/ 1860-0254 (sold separately)

Chrome

Black

•Dyno-tested and road-proven, WFB Performance Mufflers are available in both chrome and black versions •Loaded with the same non-discoloring baffle technology as Revolver™ mufflers, with a similar sound range and a style all their own •Your choice of billet aluminum end caps (must be purchased separately) to customize your mufflers •Made in the U.S.A. PART # DESCRIPTION PART # DESCRIPTION FOR 95-13 FLT/FLHT/FLHX/FLHR/FLTR MODELS (EXCEPT 10 FLHX/FLTRX) 1801-0313 Chrome 4” 1801-0315 Black 4”

SUG. RETAIL $387.95 419.95

STANDARD END CAPS (EA.) 1860-0250 Chrome 1860-0252 Black 1860-0254 Polished

Polished

SUG. RETAIL $68.95 73.95 58.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

379


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST 1800-1157

FUEL/AIR SYSTEMS ENGINE 1800-1153

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1800-1154

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1800-1156

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

380

1800-1152

FIREPOWER SERIES EXHAUST •Feature 16-gauge steel construction throughout •13/4” headpipes with 21/2” muffler bodies •Includes mounting bracket and hardware •Heat shields and baffles included (not removable on FireSweep style) •Available with chrome or black finish •Made in the U.S.A. NOTE: O2 sensor plugs are included for pre-07 FXST/FLST applications. PART # DESCRIPTION FOR 86-13 FXS/FXST/FLS/FLST (EXCEPT 09 FXSTSSE) 1800-1157 FireFlight, black 1800-1153 FireFlight, chrome 1800-1158 FireSweep, black 1800-1154 FireSweep, chrome 1800-1156 FireStorm, black 1800-1152 FireStorm, chrome

1800-1175 SUG. RETAIL $599.95 569.95 599.95 569.95 599.95 569.95

PART # DESCRIPTION SUG. RETAIL FOR 06-13 FXD, FXDWG W/ MID OR FORWARD CONTROLS (EXCEPT FLD) 1800-1162 FireFlight, chrome $569.95 1800-1167 FireSweep, black 599.95 1800-1163 FireSweep, chrome 569.95 FOR 04-13 XL W/ FORWARD CONTROLS 1800-1175 FireSweep, black 599.95 1800-1171 FireSweep, chrome 569.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE

1801-0434

1801-0433

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

1801-0631

1801-0499

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING

1801-0482

1801-0632

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS 1801-0483

1801-0481

3” FIREPOWER SERIES SLIP-ON MUFFLERS •Slip-on mufflers feature 16-gauge steel construction with polished chrome finish or black finish •Improves power and performance •2” baffles •Sold in pairs •Optional/replacement end caps (sold ea.) available separately •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 07-13 FXST, FXSTB, FXSTC, FLSTC, 08-12 FXCW, FXCWC 1801-0433 Slashcut $299.95 1801-0434 Slash-down 299.95 1801-0436 Straight-cut w/ grooved, polished billet end caps 349.95 1801-0499 Straight-cut w/ grooved, black billet end caps 359.95 1801-0631 Straight-cut w/ fluted, black billet end caps 359.95 1801-0632 Slashcut w/ black slashcut end caps 359.95

PART # DESCRIPTION SUG. RETAIL FOR 07-13 FLSTN, 08-11 FLSTSB 1801-0482 Slashcut $299.95 1801-0483 Slash-down 299.95 1801-0480 Straight-cut w/ grooved, polished billet end caps 349.95 1801-0481 Straight-cut w/ grooved, black billet end caps 359.95 1801-0633 Straight-cut w/ fluted, black billet end caps 359.95 1801-0634 Straight-cut w/ black slashcut end caps 359.95 3” FIREPOWER SERIES SLIP-ON MUFFLERS continued on next page

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

381


SECTION

6

WINDSHIELDS & FAIRINGS

3” FIREPOWER SERIES SLIP-ON MUFFLERS (CONT)

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1801-0478

1801-0479

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE 1801-0635

1801-0477

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS

1801-0636 1861-0756

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

382

PART # FOR 04-13 XL 1801-0478 1801-0479 1801-0476 1801-0477 1801-0635 1801-0636

DESCRIPTION Slashcut Slash-down Straight-cut Straight-cut Straight-cut Straight-cut

w/ w/ w/ w/

SUG. RETAIL

grooved, polished billet end caps grooved, black billet end caps black fluted billet end caps black slashcut end caps

$299.95 299.95 349.95 359.95 359.95 359.95

PART # DESCRIPTION SUG. RETAIL OPTIONAL/REPLACEMENT END CAPS FOR STRAIGHTCUT MUFFLERS 1861-0756 Polished billet end cap grooved (ea.) $59.95 1861-0757 Black billet end cap grooved (ea.) 59.95 1860-0623 Black billet end cap w/ contrasting flutes (ea.) 69.95

1861-0757

1860-0623

1860-0625

PART # DESCRIPTION SUG. RETAIL OPTIONAL/REPLACEMENT END CAPS FOR STRAIGHTCUT MUFFLERS (CONT) 1860-0624 Black billet end caps w/ contrasting flutes (pr.) $129.95 1860-0625 Black slashcut end cap (ea.) 69.95 1860-0626 Black slashcut end caps (pr.) 129.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE

1800-1504 1800-1085

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

1800-1506

TRANSMISSION & DRIVELINE GASKETS & SEALS

1800-1505

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1800-1508

CABLES

BRAKES

1800-1507

PRO-STREET SYSTEMS

TANKS & OIL FILTERS

•Feature 16-gauge steel construction throughout •13/4” headpipes step to 2”, then flow into 21/2” muffler bodies for increased flow and improved performance •Designed to increase low-end torque and produce a deep, throaty exhaust note •Includes mounting bracket and hardware •Heat shield sold separately unless noted •Available with chrome or temp black finish •Made in the U.S.A.

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

1800-1509

NOTE: Baffles for turn-out systems are welded in place; all others are removable. PART # DESCRIPTION FOR 08-11 FXCW/C, 09 FXSTSSE 1800-10851 Turn-out; chrome FOR 86-13 FXS/FXST/FLS/FLST MODELS (EXCEPT 09 FXSTSSE) 1800-15041, 2 Straight-cut; chrome 1800-15051, 2 Straight-cut; black 1800-15061, 2 Slash-cut; chrome 1800-15071, 2 Slash-cut; black 1800-15081, 2 Turn-out; chrome

SUG. RETAIL $569.95 639.95 679.95 599.95 639.95 599.95

PART # DESCRIPTION SUG. RETAIL FOR 86-13 FXS/FXST/FLS/FLST MODELS (EXCEPT 09 FXSTSSE) (CONT) 1800-15091, 2 Turn-out; black $639.95 1861-0393 Repl. chrome heat shields for 86-13 Softail models 139.95 FOR 06-13 FXDWG W/ FORWARD CONTROLS 1800-0645 Slash-cut; chrome 489.95 1861-0383 Opt. chrome heat shields 119.95 1 2

Includes heat shields. Includes O2 sensor plugs for pre-07 applications. PRO-STREET SYSTEMS continued on next page.

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

383


SECTION

6

WINDSHIELDS & FAIRINGS

PRO-STREET SYSTEMS (CONT)

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS 1800-0645

ENGINE

1800-0665

TRANSMISSION & DRIVELINE GASKETS & SEALS 1800-1084

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1861-0385

CABLES

BRAKES 1800-1011

TANKS & OIL FILTERS 1860-0627

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

384

1861-0394 PART # DESCRIPTION FOR 91-05 FXD W/ MID CONTROLS 1861-0384 Opt. chrome heat shields FOR 91-05 FXD W/ FORWARD CONTROLS 1800-0821 Slash-cut; chrome 1861-0383 Opt. chrome heat shields FOR 04-13 XL W/ FORWARD CONTROLS 1800-0665 Slash-cut; chrome 1800-0845 Slash-cut; temp black 1861-0394 Opt. chrome heat shields FOR 04-13 XL W/ MID CONTROLS 1800-1084 Slash-cut; black 1861-0385 Opt. chrome heat shields FOR 86-03 XL W/ FORWARD CONTROLS 1800-0840 Straight-cut; chrome

SUG. RETAIL $109.95 489.95 119.95 489.95 499.95 119.95 499.95 119.95 489.95

PART # DESCRIPTION FOR 86-03 XL W/ FORWARD CONTROLS (CONT) 1800-0647 Slash-cut; chrome 1861-0394 Opt. chrome heat shields FOR 86-03 XL W/ MID CONTROLS 1800-1011 Straight-cut; chrome 1800-0841 Slash-cut; chrome 1861-0456 Opt. chrome heat shields REPLACEMENT END CAP/BAFFLES (EA.) 1860-0627 Black billet aluminum end cap for PART # 18001504, 1800-1505 1860-0512 Baffle for PART #s 1800-0647, 1800-0840, 1800-0841, 1800-1011 1860-0514 Baffle for PART #s 1800-0645, 1800-0821, 1800-1504, 1800-1508, 1800-1509, 1800-1506, 1800-1505,

SUG. RETAIL $489.95 119.95 489.95 489.95 109.95

49.95 79.95 79.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1800-1310

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS 1800-0652

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1861-0597

CABLES

BRAKES 1800-0847 1861-0599

TANKS & OIL FILTERS

RADIAL SWEEPERS •Performance stepped headers with radial rear section •Fabricated from 16-gauge double-wall steel •Direct bolt-on design for easy installation •Available with show-chrome or temp black finish •Made in the U.S.A. NOTE: Will not fit with passenger footpegs. EXHAUST SYSTEMS PART # FOR 04-13 XL 1800-13101 FOR 07-13 XL 1800-0652 1800-0847 FOR 04-06 XL 1800-0676 1800-1252 FOR 86-03 XL 1800-0651 1800-1253 1800-1309

DASHES & GAUGES 1861-0598

1861-0600

1860-0513

HEAT SHIELDS (2-PC.) DESCRIPTION

SUG. RETAIL

Black w/ chrome heat shield w/ holes

$699.95

Chrome Black

499.95 529.95

Chrome Black

499.95 529.95

Chrome Black Black w/ chrome heat shield w/ holes

499.95 529.95 699.95

PART # DESCRIPTION FOR 86-13 XL 1861-0597 Chrome 1861-0599 Chrome w/ holes 1861-0598 Black 1861-0600 Black w/ holes REPLACEMENT BAFFLES 1860-0513 Repl. baffles for all exhaust systems (pr.) 1

SUG. RETAIL $179.95 189.95 199.95 209.95 49.95

Includes oxygen sensor ports and plugs for non-sensor applications.

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

385


SECTION

6

WINDSHIELDS & FAIRINGS TOURING

1800-1201 Left side w/ fishtail muffler

AUDIO & COMMUNICATION

1800-1201 Right side w/ fishtail muffler

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

HUTCH SPECIAL TRUE DUAL HEAD PIPES AND SLIP-ON MUFFLERS

1801-0450 1801-0452

•16-gauge steel construction with highly polished chrome finish 1801-0453 •Front cylinder pipe routed to left side •Rear cylinder pipe is routed to right side •Full-coverage heat shields included •Require Bassani Softail mufflers (sold separately) •Headpipes include heatshields and muffler mounting brackets •All hardware mounting brackets included with headpipes PART # •Made in the U.S.A.

1801-0451

DESCRIPTION

NOTE: Header pipes and mufflers listed will not interchange with OEM components.

TRUE DUAL HEADER PIPES 1800-1201

PART # DESCRIPTION SLIP-ON MUFFLERS (PR.) 1801-0450 4” megaphone w/ billet end cap and standard 21/4” baffles 1801-0452 3” slash-cut w/ standard 2” baffles

SUG. RETAIL

$499.95 399.95

SUG. RETAIL

For 99-13 FXST/FLST

$549.95

PART # DESCRIPTION SUG. RETAIL SLIP-ON MUFFLERS (PR.) (CONT) 1801-0453 3” slant-cut w/ standard 2” baffles $399.95 1801-0451 3” fishtail w/ standard 2” baffles (non-removable) 419.95 1861-0759 Repl. baffles for PART #s 1801-0452, 1801-0453 129.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

386

1800-0638 Right

1800-0638 Left 1801-0450

POWER CURVE TRUE-DUAL CROSSOVER HEADER PIPES FOR SOFTAILS •True-Dual crossover header systems perform as good as they look •Offer improved low-end torque, appearance and an unmistakable exhaust tone •Fabricated from 16-gauge steel, finished in show-quality chrome and supplied with custom-fit heat shields •Crossover system will only accept Bassani’s Softail slip-on mufflers (sold separately), featuring 16-gauge steel construction, removable flow-through baffles and show-chrome finish •All hardware and mounting brackets included with headpipes •Made in the U.S.A.

1801-0452

1801-0453

1801-0451

NOTE: Header pipes and mufflers listed will not interchange with OEM components. PART # DESCRIPTION CROSSOVER HEADER PIPES 1800-0639 For 07-13 FXST/FLST 1800-0638 For 89-06 FXST/FLST (except 95 Heritage)

SUG. RETAIL $489.95 489.95

PART # DESCRIPTION SLIP-ON MUFFLERS (PR.) 1801-0450 4” megaphone w/billet end cap and standard 21/4” baffles 1801-0452 3” slash-cut w/ standard 2” baffles 1801-0453 3” slant-cut w/ standard 2” baffles 1801-0451 3” fishtail w/ standard 2” baffles (non-removable) 1861-0759 Repl. baffles for PART #s 1801-0452, 1801-0453

SUG. RETAIL $499.95 399.95 399.95 419.95 129.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1800-1358

ENGINE TRANSMISSION & DRIVELINE 1800-1359

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES 1800-1360

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

B4 EXHAUST SYSTEMS •Feature 2-into-1 equal-length headers •Stepped 13/4” to 17/8” headpipes •Utilizes an advanced inner collector for maximum performance •Recommended for engines with up to 120 hp •Available with megaphone or straight muffler •Made in the U.S.A. PART # DESCRIPTION FOR 95-13 FLHT, FLHR, FLHX, FLTR 1800-1358 W/ megaphone muffler, chrome 1800-1359 W/ megaphone muffler, black 1800-1360 W/ straight muffler, chrome 1800-1361 W/ straight muffler, black

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

SUG. RETAIL $859.95 879.95 859.95 879.95

1800-1361

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

387


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1800-1512

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS 1800-1513

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

1800-1305

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

388

ROAD RAGE II MEGA POWER SYSTEMS

1800-1283

•Designed specifically to address the needs of tuned motors built for high horsepower applications •Features 2-into-1 equal-length 13/4”-17/8” stepped headpipes •Tapered megaphone-style muffler body with 4” polished or black billet end cap with contrasting machined flutes •Include full-coverage heat shields •Oxygen sensor ports and plugs (12mm and 18mm) •Include removable baffle •Optional Pseudo left-side megaphone mufflers available for Bagger models for that twin muffler look; include matching non-functioning (no baffle) muffler with black billet end cap and contrasting flutes PART # DESCRIPTION SUG. RETAIL FOR 86-13 FXS, FXST, FLS, FLST 1800-1512 Chrome short megaphone w/ black billet end cap and contrasting machined flutes $699.95 1800-1513 Black short megaphone w/ black billet end cap and contrasting machined flutes 729.95 FOR 91-13 FXD, FXDWG W/ MID OR FORWARD CONTROL (EXCEPT FLD) 1800-1305 Chrome short megaphone w/ black billet end cap and contrasting machined flutes 679.95

PART # DESCRIPTION SUG. RETAIL FOR 91-13 FXD, FXDWG W/ MID OR FORWARD CONTROL (EXCEPT FLD) (CONT) 1800-1306 Black short megaphone w/ black billet end cap and contrasting machined flutes $699.95 FOR 95-13 FLHT, FLHR, FLHX, FLTR 1800-1282 Chrome 879.95 1800-1283 Black 899.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION ROAD RAGE II MEGA POWER SYSTEMS (CONT)

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

1800-1556

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

1800-1557

GASKETS & SEALS ELECTRICAL

1800-1318

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1801-0544

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS 1801-0549 PART # DESCRIPTION SUG. RETAIL FOR 04-13 XL W/ MID OR FORWARD CONTROLS 1800-15561 Chrome, short meg w/ chrome heat shields $699.95 1800-15571 Black, short meg w/ black heat shields 729.95 FOR 07-13 V-ROD MODELS (EXCEPT VRSCF) (STEPPED 13/4” TO 17/8” TO 2”) 1800-1317 Chrome, long meg w/ heat shields 699.95 1800-1318 Black, long meg w/ heat shields 739.95 OPTIONAL PSEUDO LEFT-SIDE MEGAPHONE MUFFLERS 1801-0548 For 09-13 FLHT, FLHR, FLHX, FLTR (PART #1800-1282), chrome 349.95

PART # DESCRIPTION SUG. RETAIL OPTIONAL PSEUDO LEFT-SIDE MEGAPHONE MUFFLERS (CONT) 1801-0544 For 95-08 FLHT, FLHR, FLHX, FLTR (PART #1800-1282), chrome $349.95 1801-0549 For 09-13 FLHT, FLHR, FLHX, FLTR (PART #1800-1283), black 359.95 1801-0545 For 95-08 FLHT, FLHR, FLHX, FLTR (PART #1800-1283), black 359.95 REPLACEMENT BAFFLES 1861-0764 For PART #s 1800-1282, 1800-1283 79.95 1

Use on XL models with 11” or longer shocks only

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

389


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

1800-1558

EXHAUST 1800-1559

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE 1800-1510

GASKETS & SEALS ELECTRICAL 1800-1511

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

390

1800-1284

ROAD RAGE II B1 POWER SYSTEMS •Designed specifically to address the needs of tuned motors built 1800-1285 for high horsepower applications •Uses a unique extended inner collector maximizing performance •Features 2-into-1 equal-length stepped headpipes; systems for Dyna, Softail and Sportster feature 1-step headers, 13/4” to 17/8”; systems for V-Rod and FL models feature 2-step headers, 13/4” to 17/8” to 2” •4” straight-style performance muffler body with 21/2” x 161/2” baffle and billet end cap with contrasting machined flutes •Include full-coverage heat shields •Oxygen sensor port plugs also included for non-sensor applications •Optional Pseudo left-side megaphone mufflers available for Bagger models for that twin muffler look, and reducer bushings also included for required applications •Made in the U.S.A. PART # DESCRIPTION FOR 86-13 FXS, FXST, FLS, FLST 1800-1510 Chrome w/ black billet end cap w/ machined contrasting flutes and chrome heat shields 1800-1511 Black w/ black billet end caps w/ machined contrasting flutes and black heat shields FOR 95-13 FLHT, FLHR, FLHX, FLTR 1800-1284 Chrome w/ black billet end caps w/ contrasting flutes 1800-1285 Black w/ black billet end caps w/ contrasting flutes FOR 91-13 FXD, FXDWG W/ MID OR FORWARD CONTROL (EXCEPT FLD) 2 1800-1302 Chrome w/ black billet end cap, machined flutes and chrome heat shields 1800-13032 Black w/ black billet end cap, machined flutes and black heat shields

SUG. RETAIL $699.95 729.95 879.95 899.95 679.95 699.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING

ROAD RAGE II B1 POWER SYSTEMS (CONT)

AUDIO & COMMUNICATION LUGGAGE 1800-1366

SEATS & SISSY BARS 1800-1302

EXHAUST FUEL/AIR SYSTEMS

1800-1303

ENGINE TRANSMISSION & DRIVELINE

1800-1315

GASKETS & SEALS 1800-1320

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

1801-0550

BRAKES

1801-0547 PART # DESCRIPTION FOR 86-13 XL 1800-15582 Chrome w/ black billet end cap w/ machined contrasting flutes and chrome heat shields 1800-15592 Black w/ black billet end caps w/ machined contrasting flutes and black heat shields FOR 09-12 XR 1200/1200X 1800-1366 Black w/ black billet end caps w/ machined contrasting flutes FOR 07-13 VRSCAW, VRSCDX, VRSCX, 09-13 VRSCF 1800-13151 Chrome w/ black billet end cap w/ machined contrasting and chrome heat shields 1800-13161 Black w/ black billet end cap w/ machined contrasting and black heat shields FOR 02-05 VRSCA/B 1800-1319 Chrome w/ black billet end cap w/ machined contrasting flutes and chrome heat shields 1800-1320 Black w/ black billet end cap w/ machined contrasting flutes and black heat shields OPTIONAL PSEUDO LEFT-SIDE MUFFLER 1801-0550 For 09-13 FLHT, FLHR, FLHX, FLTR (PART #1800-1284), chrome 1801-0546 For 95-08 FLHT, FLHR, FLHX, FLTR (PART #1800-1284), chrome 1801-0551 For 09-13 FLHT, FLHR, FLHX, FLTR (PART #1800-1285), black 1801-0547 For 95-08 FLHT, FLHR, FLHX, FLTR (PART #1800-1285), black REPLACEMENT BAFFLE (EA.) 1861-0763 For PART #s 1800-1284, 1800-1285 OPTIONAL HEAT SHIELD 1861-0758 For 09-12 XR 1200/1200X (PART #1800-1366), black 1 2

SUG. RETAIL $699.95 729.95 649.95 699.95 739.95 699.95 739.95 349.95 349.95 359.95 359.95 79.95 199.95

Will not fit VRSCF models with passenger pegs. Use on XL models with 11” or longer shocks only.

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

391


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION 1800-1151

1800-1419

LUGGAGE SEATS & SISSY BARS 1800-1418

EXHAUST FUEL/AIR SYSTEMS ENGINE

1800-1164

1800-1280

TRANSMISSION & DRIVELINE GASKETS & SEALS

1800-1307

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

392

1800-0657 1800-1281

ROAD RAGE 2-INTO-1 SYSTEMS •Stepped headers merge into a true reverse-cone megaphone muffler •13/4” headpipe steps up to 17/8” into the collector to increase flow and improve performance •4” muffler body with polished billet end cap (except where noted) •Removable spiral-core louvered baffle included •Include mounting hardware •Available in long (24”) and short (12”) muffler lengths with chrome or black finish •Heat shields included where noted •Made in the U.S.A. PART # DESCRIPTION FOR 08-11 FXCW/C, 09 FXSTSSE W/ FORWARD CONTROLS 1800-1089 Chrome, short meg w/ heat shields 1800-1090 Black, short meg w/ heat shields FOR 86-13 FXS/FXST/FLS/FLST (EXCEPT 09 FXSTSSE) 1800-11511 Chrome, long meg w/ heat shields 1800-12991 Chrome, short meg w/ heat shields 1800-11551 Black, long meg w/ heat shields 1800-13001 Black, short meg w/ heat shields FOR 12-13 FLD 1800-1418 Chrome w/ heat shields and black billet end cap w/ machined contrasting flutes 1800-1419 Black w/ heat shields and black billet end cap w/ machined contrasting flutes FOR 06-13 FXD/FXDWG W/ FORWARD OR MID CONTROLS 1800-1160 Chrome, long w/ heat shields 1800-1280 Chrome, short upswept meg w/ heat shields 1800-1307 Chrome, short upswept meg w/ heat shields (not stepped, 13/4” only) 1800-1164 Black, long w/ heat shields 1800-1281 Black, short upswept meg w/ heat shields

SUG. RETAIL $649.95 679.95 649.95 649.95 679.95 679.95

699.95 749.95 649.95 649.95 729.95 679.95 679.95

1800-1238

PART # DESCRIPTION FOR 06-13 FXD/FXDWG W/ FORWARD OR MID CONTROLS (CONT) 1800-1308 Black, short upswept meg w/ heat shields (not stepped, 13/4” only) FOR 91-05 FXD/FXDWG W/ FORWARD OR MID CONTROLS 1800-1278 Chrome, short upswept meg w/ heat shields 1800-1307 Chrome, short upswept meg w/ heat shields (not stepped, 13/4” only) 1800-1279 Black, short upswept meg w/ heat shields 1800-1308 Black, short upswept meg w/ heat shields (not stepped, 13/4” only) FOR 10-13 FLHT, FLHR, FLHX, FLTRX 1800-12372 Chrome w/ chrome header pipes, long w/ heat shields 1800-12382 Black, long w/ heat shields FOR 07-09 FLHT, FLHR, FLHX, FLTR 1800-0656 Chrome, long meg w/ silver ceramic headpipes 1800-0658 Black, long meg FOR 89-06 FLT, FLHT, FLHR, FLHX, FLTR 1800-0655 Chrome, long meg w/ silver ceramic headpipes 1800-0657 Black, long meg

SUG. RETAIL

$759.95 679.95 729.95 699.95 759.95

859.95 949.95 659.95 699.95 659.95 699.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS

ROAD RAGE 2-INTO-1 SYSTEMS (CONT)

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

1800-1172

EXHAUST

1800-1168

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

1800-1251 1800-1249

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1800-1149

1800-1254

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES 1800-1277

1800-1276 PART # DESCRIPTION FOR 04-13 XL W/ MID OR FORWARD CONTROLS 3 1800-1168 Chrome, long meg w/ heat shields 1800-1272 Chrome, short upswept meg w/ heat shields 1800-11723 Black, long meg w/ heat shields 1800-1273 Black, short upswept meg w/ heat shields FOR 86-03 XL W/ MID OR FORWARD CONTROLS 1800-12483 Chrome, long meg w/ heat shields 1800-1270 Chrome, short upswept meg w/ heat shields 1800-12493 Black, long meg w/ heat shields 1800-1271 Black, short upswept meg w/ heat shields FOR 02-05 VRSCA/B W/ FORWARD CONTROLS 1800-1251 Chrome, long meg w/ heat shields

SUG. RETAIL $649.95 649.95 679.95 699.95 649.95 649.95 679.95 679.95 699.95

PART # DESCRIPTION FOR 02-05 VRSCA/B W/ FORWARD CONTROLS (CONT) 1800-1274 Chrome, short meg w/ heat shields 1800-1254 Black, long meg w/ heat shields 1800-1275 Black, short meg w/ heat shields FOR 07-13 V-ROD MODELS (EXCEPT VRSCF) 1800-1149 Chrome, long meg w/ heat shields 1800-1276 Chrome, short meg w/ heat shields 1800-1277 Black short meg w/ heat shields 1800-1298 Black, long meg w/ heat shields (stepped three times: 13/4” to 17/8” to 2”)

SUG. RETAIL $679.95 739.95 739.95

FOOTRESTS & LICENSE PLATE FRAMES

679.95 679.95 739.95

WHEELS & AXLES

739.95

HARDWARE, CHEMICALS & TOOLS

ROAD RAGE 2-INTO-1 SYSTEMS continued on next page

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FRAMES, SUSPENSION & FENDERS

COVERS, SECURITY & GENERAL

393


SECTION

6

WINDSHIELDS & FAIRINGS

ROAD RAGE 2-INTO-1 SYSTEMS (CONT)

TOURING AUDIO & COMMUNICATION 1801-0591

LUGGAGE SEATS & SISSY BARS

1801-0592

EXHAUST 1861-0387

FUEL/AIR SYSTEMS 1801-0593

ENGINE TRANSMISSION & DRIVELINE

1801-0594

1861-0392

GASKETS & SEALS

1861-0512

1861-0455

ELECTRICAL

1861-0609

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1861-0610 1860-0494

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

394

PART # DESCRIPTION SUG. RETAIL OPTIONAL PSEUDO LEFT-SIDE MUFFLER 1801-0591 For 95-08 FLHT, FLHR, FLHX, FLTR (1800-0655, 1800-0656); chrome $349.95 1801-0593 For 09-13 FLHT, FLHR, FLHX, FLTR (1800-0656, 1800-1237); chrome 349.95 1801-0592 For 95-08 FLHT, FLHR, FLHX, FLTR (1800-0658, 1800-0657); black 349.95 1801-0594 For 09-13 FLHT, FLHR, FLHX, FLTR (1800-1238, 1800-0658); black 349.95 BAFFLES, HEAT SHIELDS AND END CAPS 1860-0543 21/2” i.d. performance baffle for PART #s 1800-0660, 1800-0650, 1800-1013, 1800-1287, 1861-0381 79.95 1861-0762 21/2” i.d. performance baffle for PART #s 1800-1149, 1800-1298 79.95 1 1860-0541 2” /2” i.d. quiet baffle for PART #s 1800-0655, 1800-0657, 1800-0656, 1800-0658, 1800-1237, 1800-1238 79.95 1861-0761 21/4” i.d. baffle for PART #s 1800-1151, 1800-1155, 1800-1160, 1800-1164, 1800-1172, 1800-1248, 1800-1248 79.95 1861-0389 2” i.d. quiet baffle for PART #s 1800-0655, 1800-0656, 1800-0658, 1800-0659, 1800-0660 79.95 1860-0518 2” i.d. quiet baffle for PART #s 1800-0659, 1800-0660, 1800-1092, 1800-1287, 1800-0839, 1800-1015, 1800-1094, 1800-1149 79.95 1860-0519 2” i.d. standard baffle for PART #s 1800-0663, 1800-0664, 1800-0831, 1800-0832, 1800-0826, 1800-1286 79.95 1861-0387 Opt. chrome heat shields for PART #s 1800-0655, 1800-0656, 1800-0657, 1800-0658 249.95 1861-0512 Opt. black heat shields for PART #s 1800-0655, 1800-0656, 1800-0657, 1800-0658 279.95 1861-0392 Opt. chrome heat shields for PART #s 1800-0660, 1800-0832 179.95

1860-0495

1860-0496

1860-0497

PART # DESCRIPTION SUG. RETAIL BAFFLES, HEAT SHIELDS AND END CAPS (CONT) 1861-0455 Opt. chrome heat shields for PART #1800-0839 $179.95 1861-0609 Opt. chrome heat shields for PART #s 1800-0831, 1800-0832 179.95 1861-0610 Opt. black heat shields for PART #s 1800-0831, 1800-0832 199.95 1861-0624 Opt. black heat shields for PART #s 1800-1092, 1800-1287 199.95 1860-0494 Opt. polished billet end cap w/ 1” lip for long mufflers PART #s 1800-0650, 1800-0655, 1800-0656, 1800-0659, 1800-0660, 1800-0825, 1800-1013, 1800-1087 (for chrome or black ceramic) (ea.) 69.95 1860-0495 Opt. black powder-coated end cap w/ 1” lip for long mufflers PART #s 1800-0650, 1800-0655, 1800-0656, 1800-0659, 1800-0660, 1800-0825, 1800-1013, 1800-1087 (for chrome or black ceramic) (ea.) 69.95 1860-0496 Opt. polished billet end cap w/ 1/2” lip for short mufflers PART #s 1800-0663, 1800-0826, 1800-0831, 1800-0832, 1800-1089 (for chrome or black ceramic) (ea.) 69.95 1860-0497 Opt. black powder-coated end cap w/ 1/2” lip for short mufflers PART #s 1800-0663, 1800-0826, 1800-0831, 1800-0832, 1800-1089 (for chrome or black ceramic) (ea.) 69.95 1860-0532 Opt. black powder-coated end cap w/ contrasting machined flutes for PART #s 1800-0655, 1800-0656, 1800-0659, 1800-0660, 1800-1010, 1800-1087, 1800-1151, 1800-1160, 1800-1164, 1800-1168, 1800-1172, 1800-1248, 1800-1249, 1801-0184, 1801-0185, 1802-0119, 1810-2002, 1810-2003, 1861-0381 69.95 1 2 3

Includes O2 sensor bung plugs for pre-07 models. Included new-style 12mm and 18mm O2 sensor ports. Use on XL models with 11” or longer shocks only

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1800-1301 1800-1288

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS 1800-1363

1800-1362

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES

1800-1364

TANKS & OIL FILTERS

1800-1365

DASHES & GAUGES

+P BAGGER STEPPED TRUE-DUALS SYSTEMS WITH POWER CURVE 13/4”

17/8”

•Features equal length into step headpipes with 4” straight muffler style •Include 12mm and 18mm oxygen sensor ports and plugs •Include full coverage headpipe heat shields •Produce a distinctive “stereo-friendly sound” •B1 style muffler utilizes advanced inner collector for maximum performance •Made in the U.S.A.

FRAMES, SUSPENSION & FENDERS 1860-0542

FOOTRESTS & LICENSE PLATE FRAMES

NOTE: 10 FLHX/FLTRX models will require PART #1861-0573 to properly mount. FOR 95-13 FLT, FLHT, FLHR, FLHX, FLTR PART # DESCRIPTION WITH MEGAPHONE-STYLE MUFFLER 1800-1288 Chrome w/ chrome end caps 1800-1301 Chrome w/ black powder-coat end caps 1800-1362 Black w/ polished end cap 1800-1363 Black w/ black end caps and contrasting flutes

SUG. RETAIL $999.95 999.95 1,099.95 1,099.95

PART # DESCRIPTION WITH B1-STYLE MUFFLER 1800-1364 Chrome w/ black end caps and contrasting flutes 1800-1365 Black w/ black end caps and contrasting flutes REPLACEMENT BAFFLES 1860-0542 Repl. 21/2” performance baffles (pr.)

SUG. RETAIL

$994.95 1,099.95 129.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

395


SECTION

6

WINDSHIELDS & FAIRINGS TOURING

1802-0125 Rear head pipe

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1802-0125 w/ 1801-0184 Megaphone mufflers

EXHAUST FUEL/AIR SYSTEMS ENGINE 1800-0653 Right

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

1800-0653 Left

POWER CURVE TRUE-DUAL CROSSOVER HEADER PIPES •True Dual crossover header pipes perform as good as they look •Features proper port angle and patented matched-length rear headpipe design that produces even performance from each cylinder •Offers improved low-end torque and appearance •Fabricated from 16-gauge steel, finished in chrome or black and supplied with three custom-fit heat shields •Can be used with Bassani mufflers or most 09-12 OEM-style aftermarket mufflers (mufflers sold separately) •Includes 12mm and 18mm sensor ports and plugs •Made in the U.S.A.

1802-0249 w/ 1801-0579 mufflers PART # 1802-01252 1802-02492 1800-06541 1800-06531 1 2

DESCRIPTION For 09-13 FLHT, FLHR, FLHX, FLTR; chrome For 09-13 FLHT, FLHR, FLHX, FLTR; black For 07-08 FLHT, FLHR, FLHX, FLTR; chrome For L85-06 FLT, FLHT, FLHR FLHX, FLTR; chrome

SUG. RETAIL $499.95 549.95 469.95 469.95

Reuse two existing heat shields. Includes 12mm and 18mm sensor ports and plugs.

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

396

1802-0248 Right w/ 1801-0333 mufflers

1802-0248 Left w/ 1801-0333 mufflers

BAGGER TRUE DUAL HEADPIPES •True dual headpipes with heat shields •Right-side pipe follows same clean lines as frame •Show-chrome or black finish •Can be used with Bassani mufflers or most 95-13 OEM-style aftermarket mufflers •Mounting instructions and hardware included •Made in the U.S.A. PART # DESCRIPTION FOR 09-13 FLT, FLHT, FLHR, FLTR, FLHX 1 1802-0132 Chrome 1802-02481 Black 1

SUG. RETAIL $489.95 549.95

Includes 12mm and 18mm sensor ports and plugs.

1802-0132 w/ 1801-0505 mufflers

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

1801-0542 w/1861-0747 1801-0577

EXHAUST FUEL/AIR SYSTEMS ENGINE 1801-0543 w/1861-0747

TRANSMISSION & DRIVELINE

1861-0746

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1861-0747 1861-0748

CABLES 4” SLIP-ON QUICK CHANGE SERIES MUFFLERS •Mufflers feature 16-gauge steel construction •Straight can-style muffler bodies to be used with choice of optional billet end caps (sold separately) •Distinctive aggressive exhaust sound •Improve power and performance •Slash cut end caps can be rotated for different looks •Sold in pairs (unless noted) •Made in the U.S.A.

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1861-0755 1861-0749

PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE MODELS 1801-0542 Chrome $419.95 1801-0543 Black 439.95 FOR 12-13 FLD 1801-05771 Chrome w/ black billet end cap w/ contrasting flutes 299.95 OPTIONAL BILLET END CAPS (PR.) 1860-0622 Black billet end cap w/ contrasting flutes 129.95 1861-0746 Black tapered w/ contrasting flutes 129.95 1861-0747 Black straight w/ contrasting flutes 129.95

FRAMES, SUSPENSION & FENDERS PART # DESCRIPTION OPTIONAL BILLET END CAPS (PR.) (CONT) 1861-0748 Brightly polished slash cut 1861-0749 Black slash cut 1861-0750 Brightly polished tapered w/ flutes REPLACEMENT BILLET END CAPS (EA.) 1861-0751 Black tapered w/ contrasting flutes 1861-0752 Black straight w/ contrasting flutes 1861-0753 Brightly polished slash cut 1861-0754 Black slash cut 1861-0755 Brightly polished tapered w/ flutes 1

SUG. RETAIL $129.95 129.95 129.95 69.95 69.95 69.95 69.95 69.95

Single muffler.

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

397


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

1801-0500 1801-0506

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS 1801-0502

1801-0508

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS

1801-0510 1801-0514

1801-0184

4” SLIP-ON MUFFLERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

398

•4” diameter slip-on mufflers feature 16-gauge steel construction, removable flow-through baffles and show-chrome or black finish •Bolt to stock locations with supplied hardware •Sold in pairs •Made in the U.S.A. FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR, FLHX MODELS PART # DESCRIPTION WITH 2” STANDARD BAFFLES 1801-0506 Slant cut, chrome 1801-0504 Scalloped slash-cut, chrome 1801-0500 Straight cut, chrome 1801-0502 Slant down, chrome 1801-0508 Scallop slant-cut, chrome 1801-0510 Inverted billet insert, chrome WITH 21/4” STANDARD BAFFLES 1801-0184 Megaphone, chrome w/ billet end cap 1801-0514 Megaphone, chrome w/ black billet end caps and contrasting flutes

SUG. RETAIL $489.95 499.95 469.95 489.95 499.95 519.95 519.95 549.95

PART # DESCRIPTION WITH 21/2” PERFORMANCE BAFFLES 1801-0185 Megaphone, chrome w/ billet end cap 1801-0333 Megaphone, black w/ billet end cap 1801-0515 Megaphone, chrome w/ black billet end caps and contrasting flutes 1801-0579 Megaphone, black w/ black billet end caps and contrasting flutes 1801-0507 Slant cut, chrome 1801-0505 Scalloped slash-cut, chrome 1801-0501 Straight cut, chrome 1801-0503 Slant down, chrome 1801-0509 Scallop slant-cut, chrome 1801-0511 Inverted billet insert, chrome

SUG. RETAIL $519.95 549.95 549.95 549.95 489.95 499.95 469.95 489.95 499.95 499.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS

4” SLIP-ON MUFFLERS (CONT)

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

1801-0333 1801-0579

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

1801-0421

1801-0505

GASKETS & SEALS ELECTRICAL

LIGHTING 1801-0578

HANDLEBARS, CONTROLS & MIRRORS

1801-0516

1860-0542 1860-0494

CABLES

BRAKES

1860-0543

1801-0517 PART # DESCRIPTION FOR 10 FLHX, FLTRX MODELS 1801-0421 Megaphone, black w/ billet end cap (ea.) FOR 12-13 FLD 1801-0578 Megaphone, chrome w/ black billet end caps

SUG. RETAIL $299.95 299.95

PART # DESCRIPTION FOR 09-13 VRSCF MODELS 1801-0516 Straight cut, black w/ black billet end caps and contrasting flutes 1801-0517 Straight cut, chrome w/ black billet end caps and contrasting flutes

PART # DESCRIPTION REPLACEMENT BAFFLES AND END CAPS 1860-0515 Repl. 2” standard baffles for PART #s 1801-0186, 1801-0188, 1801-0265 1860-0603 Repl. 2” standard baffles for PART #s 1801-0500, 1801-0502, 1801-0504, 1801-0506, 1801-0508, 1801-0510 1860-0517 Repl. 21/4” standard baffles for PART #s 1801-0184, 1801-0332 1861-0765 Repl. 21/2” replacement baffles for PART #s 1801-0501, 1801-0503, 1801-0505, 1801-0507, 1801-0509, 1801-0511 1860-0542 Repl. 21/2” performance baffles for PART #s 1801-0185 1860-0543 2” I.d. baffle for PART # 1801-0421 (ea.) 1860-0541 21/2” I.d. baffle for PART # 1801-0421 (ea.) 1860-0494 Repl. polished billet end cap w/ 1” lip for long megaphone mufflers PART #s 1801-0184, 1801-0185, 1801-0332, 1801-0333 (ea.) 1802-0222 Repl. polished billet inverted end cap for PART #s 1801-0510, 1801-0511 (ea.) 1860-0495 Opt. black powder-coated end cap w/ 1” lip for long megaphone mufflers PART #s 1801-0184, 1801-0185, 1801-0332, 1801-0333 (ea.)

1860-0495 SUG. RETAIL

$579.95 550.95

SUG. RETAIL $129.95 129.95 129.95 129.95 129.95 79.95 79.95 69.95 99.95 69.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

399


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1801-0354

1801-0353

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING

31/2” SLIP-ON MUFFLERS •Slip-on mufflers feature 16-gauge steel construction •13/4” inlet fits stock and most aftermarket headpipes •Removable baffles •Include mounting hardware and instructions •Sold in pairs •Made in the U.S.A. PART # FOR 95-13 FLT, 1801-0353 1801-0354 1801-0355

1801-0355

DESCRIPTION SUG. RETAIL FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE MODELS Straight cut, chrome $299.95 Slash cut, chrome 299.95 Slant cut, chrome 299.95

PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE MODELS 1861-0760 2” i.d. baffles for PART #s 1801-0353, 1801-0354, 1801-0355 (pr.) $129.95

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

400

CLASSIC FISHTAIL SLIP-ON MUFFLERS •Huge 31/2” inch body with a built-in baffle •Fit stock and most aftermarket head pipes •16-gauge steel construction with a show-chrome finish •Inlet to the fishtail has been increased to 21/4” and the fishtail outlet is wider to increase exhaust flow and improve power •Sound is deep and throaty but the classic fishtail is clearly audible •Sold in pairs •Made in the U.S.A. PART # 1801-0305

DESCRIPTION For 95-13 FLT, FLHT, FLHX, FLHR, FLTR

SUG. RETAIL $489.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

1800-1121 Left side

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

COVINGTONS HOT ROD TRUE-DUALS CROSSOVER SYSTEMS

GASKETS & SEALS

1800-1121 •Temp black 13/4” head pipes Right side •Full-coverage chrome heat shields with signature Covingtons-style holes that reveal the black pipes underneath •Chrome 4” megaphone-style mufflers with Covingtons black inlay billet end caps •Include removable baffles •Made in the U.S.A. PART # 1800-12691 1800-11212 1860-0542 1 2

DESCRIPTION For 10-13 FLHT, FLHR, FLTR, FLHX, FLTRX For L85-09 FLHT, FLHR, FLTR, FLT, FLHX Repl. 21/2” performance baffles (pr.)

ELECTRICAL SUG. RETAIL $1,295.95 1,296.95 129.95

LIGHTING

1860-0542

10 FLHX, FLTRX will require PART #1861-0573 to properly mount. O2 sensor port plugs included for non-sensor applications.

HANDLEBARS, CONTROLS & MIRRORS

1800-1122

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

COVINGTONS HOT ROD 2-INTO-1 SYSTEMS

FRAMES, SUSPENSION & FENDERS

•Inspired by Jerry Covington’s days in the hot rod era •Megaphone collector with turn-out end and removable baffle •Full-coverage heat shields with Covington-style holes •O2 sensor port plugs included for pre-07 models •Made in the U.S.A. PART # FOR 86-11 FXST/FLST, 91-11 DYNA AND 87-94 FXR 1800-1122 1800-1123

FOOTRESTS & LICENSE PLATE FRAMES

1800-1123

WHEELS & AXLES DESCRIPTION Black Chrome

SUG. RETAIL $899.95 899.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

401


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST 1802-0209 Left side

FUEL/AIR SYSTEMS ENGINE

1802-0209 Right side

1801-0564

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

402

1801-0569

TRU POWER HIGH-PERFORMANCE TRUE DUAL HEADERS AND MUFFLERS •The ultimate true dual performance exhaust system •Integrated five-step header design is dyno-perfected for maximum horsepower and torque gains •Mufflers are fully and properly tuned, no other slip-on muffler compares •Mufflers include CNC-machined billet “Stealth” tips in chrome or gloss black ceramic finish; tips will not discolor •Tips can be rotated 180° to show or hide the laser-engraved LA Choppers logo •Stealth end caps feature gloss black ceramic coat finish •Headpipes only work with listed slip-on mufflers; mufflers will not fit OEM headpipes •Made in the U.S.A. PART # DESCRIPTION TRU POWER TRUE DUAL HEADERS 1802-0210 For 10-13 FLHT, FLHR, FLTR models 1802-0209 For 09 FLHT, FLHX, FLHR, FLTR models 1802-0208 For 07-08 FLHT, FLHX, FLHR, FLTR models 1802-0207 For 95-06 FLT, FLHT, FLHX, FLHT, FLTR models (except SE models)

SUG. RETAIL $609.95 609.95 609.95 609.95

PART # 3.5” MUFFLERS 1801-0564 1801-0565 4” MUFFLERS 1801-0568 1801-0569

1860-0549

1860-0552 DESCRIPTION

SUG. RETAIL

Chrome w/ gloss black ceramic tips Chrome w/ chrome tips

$429.95 429.95

Chrome w/ gloss black ceramic tips Chrome w/ chrome tips

449.95 449.95

OPTIONAL/REPLACEMENT LAC-STYLE END CAPS PART # FOR 3.5” MUFFLERS 1860-0549 1860-0550

DESCRIPTION (EA.) Gloss black ceramic Chrome

SUG. RETAIL $74.95 74.95

PART # DESCRIPTION FOR 4” MUFFLERS (EA.) 1860-0551 Gloss black ceramic 1860-0552 Chrome

SUG. RETAIL $89.95 89.95

TRU POWER TRUE DUAL EXHAUST HEADERS •Header pipes are dyno-designed to maximize torque and performance •21/8” diameter heat shields maximize style and the look •Provide balance and symmetry, giving your bike a tight, tough look •Beautiful triple chrome-plated hand-polished finish •For maximum performance gains use with our Tru Power slip-on mufflers (sold separately) or with any 95-13 OEM-style mufflers •Stainless steel mounting hardware and installation instructions included •Made in the U.S.A. PART # 1802-0206 1802-0090 1802-0089 1802-0088

DESCRIPTION 10-13 FLHT, FLHR, FLHX, FLTR 09 FLHT, FLHR, FLTR, FLHX 07-08 FLHT, FLHR, FLHX, FLTR 95-06 FLT, FLHT, FLHR, FLHX, FLTR

1802-0090

SUG. RETAIL $514.95 514.95 514.95 514.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE 1801-0554

1801-0557

SEATS & SISSY BARS

1860-0556

EXHAUST 1860-0557 1801-0614

FUEL/AIR SYSTEMS

1801-0615

TRU POWER SLIP-ON MUFFLERS •Dyno perfected to optimize torque and performance •Sleek, no-weld design •Race-proven technology; perforated core baffles provide awesome sound and great acceleration •Beautiful hand-polished triple-plated chrome finish or new vibrant black ceramic coat that will take the heat without discoloring •Chrome mufflers include CNC-machined billet “Stealth” tips in chrome or shiny black ceramic finish •Black ceramic coat mufflers include CNC-machined billet chrome “Stealth” tips or matching black ceramic coat finish tips •Tips can be rotated 180° to show or hide the laser-engraved LA Choppers logo •Optional/replacement baffles available separately •Mufflers sold in pairs •Made in the U.S.A.

ENGINE TRANSMISSION & DRIVELINE

1860-0549

GASKETS & SEALS

1860-0552

FOR 95-13 FLT/FLHT/FLHX/FLHR/FLTR MODELS PART # DESCRIPTION 3.5” CHROME MUFFLERS 1801-0554 W/ gloss black exhaust tips 1801-0555 W/ chrome exhaust tips 3.5” BLACK CERAMIC COAT MUFFLERS 1801-0612 W/ chrome exhaust tips 1801-0613 W/ vibrant black ceramic coat exhaust tips 4” CHROME MUFFLERS 1801-0556 W/ gloss black exhaust tips 1801-0557 W/ chrome exhaust tips

SUG. RETAIL $429.95 429.95 509.95 509.95 449.95 449.95

PART # DESCRIPTION 4” BLACK CERAMIC COAT MUFFLERS 1801-0614 W/ chrome exhaust tips 1801-0615 W/ vibrant black ceramic coat exhaust tips OPTIONAL/REPLACEMENT BAFFLES FOR 3.5” MUFFLERS 1860-0555 Standard baffle (ea.) 1860-0556 Quiet baffle (ea.) OPTIONAL/REPLACEMENT BAFFLES FOR 4” MUFFLERS (EA.) 1860-0557 Standard baffle 1860-0558 Quiet baffle

SUG. RETAIL

PART # DESCRIPTION FOR 4” MUFFLERS (EA.) 1860-0551 Gloss black ceramic 1860-0552 Chrome

SUG. RETAIL

$519.95 519.95 99.95 112.95 99.95 112.95

OPTIONAL/REPLACEMENT LAC STYLE END CAPS PART # DESCRIPTION FOR 3.5” MUFFLERS (EA.) 1860-0549 Gloss black ceramic 1860-0550 Chrome

SUG. RETAIL $74.95 74.95

$89.95 89.95

1801-0558

TRU POWER 31/2” SLIP-ON MUFFLERS •Dyno perfected to optimize torque and performance •Work with stock or aftermarket exhaust headers that accept the stock mufflers •Sleek, no-weld design •Race-proven technology; perforated core baffles provide awesome sound and great acceleration •Beautiful hand-polished triple-plated chrome finish •Include CNC-machined billet “Stealth” tips in chrome or shiny black ceramic finish; tips will not discolor •Tips can be rotated 180° to show or hide the laser-engraved LA Choppers logo •Mounting hardware and instructions included •Optional/replacement baffles sold separately •Mufflers sold in pairs •Made in the U.S.A. PART # DESCRIPTION CHROME MUFFLERS W/ CHROME EXHAUST TIPS 1801-0558 For 07-13 FLSTF models 1801-0560 For 05-13 FLSTN, 08-11 FLSTSB models 1801-0562 For 07-10 FXST/B/C, 07-13 FLSTC and 08-11 FXCW/C models

SUG. RETAIL $399.95 399.95 399.95

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

1801-0572 PART # DESCRIPTION CHROME MUFFLERS W/ CHROME EXHAUST TIPS (CONT) 1801-0574 For 91-13 Dyna Glide (except FLD, FXDF, 10-12 FXDWG) 1801-0572 For 08-13 FXDF, 10-13 FXDWG models 1801-0570 For 04-13 XL

SUG. RETAIL

$399.95 399.95 399.95

TRU POWER 31/2” SLIP-ON MUFFLERS continued on next page

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

403


SECTION

6

WINDSHIELDS & FAIRINGS

TRU POWER 31/2” SLIP-ON MUFFLERS (CONT)

TOURING AUDIO & COMMUNICATION

1860-0553 1801-0563

LUGGAGE SEATS & SISSY BARS

1801-0571

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

PART # DESCRIPTION CHROME MUFFLERS W/ GLOSS BLACK CERAMIC EXHAUST TIPS 1801-0559 For 07-13 FLSTF models 1801-0561 For 05-13 FLSTN, 08-11 FLSTSB models 1801-0563 For 07-10 FXST/B/C, 07-13 FLSTC and 08-11 FXCW/C models 1801-0575 For 91-13 Dyna Glide (except FLD, FXDF, 10-13 FXDWG) 1801-0573 For 08-13 FXDF, 10-13 FXDWG models 1801-0571 For 04-13 XL OPTIONAL/REPLACEMENT BAFFLES (EA.) 1860-0553 Standard baffle 1860-0554 Quiet baffle OPTIONAL/REPLACEMENT LAC-STYLE END CAPS (EA.) 1860-0549 Gloss black ceramic 1860-0550 Chrome

1860-0554

SUG. RETAIL $399.95 399.95 399.95 399.95 399.95 399.95 99.95 112.95 74.95 74.95

1860-0549

1860-0550

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

404

1800-0719

1800-0720

CUSTOM EXHAUST •Custom chopper pipes •187R exhaust feature a stepped header design (13/4” steps out to 21/4”) •187 Laser and Straight-cut exhaust feature a stepped design (13/4” steps out to 2”) and 2.25” dia. heat shields •Beautiful hand-polished chrome finish •Adds horsepower and allows cooler running •Mounting kit included; features a billet chrome transmission plate and necessary mounting hardware •187 Straight-cut exhaust systems can use optional custom exhaust tips for 2.15” I.D exhaust pipes (sold separately) •Include heat shields, baffles and mounts for O2 sensors unless noted •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION FOR 86-13 SOFTAIL MODELS 1800-0719 187 Lazer tip cut exhaust 1800-0720 187 Straight-cut tip exhaust FOR CUSTOM APPLICATIONS 1800-01961 187R exhaust w/ slash-cut tips for right-side drive custom applications 1

1800-0196

SUG. RETAIL $519.95 499.95

439.95

Do not include heat shields or O2 sensor mounts.

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION 1800-1325

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING 1800-1326

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES OPEN LINE 2-INTO-1 SYSTEMS •Unmatched European craftsmanship, outstanding performance, design, and of course the unmistakable deep resonant sound of Akrapovic all come together in these 2-into-1 systems •Highest quality materials are used throughout, including Austenitic (“surgical grade”) stainless steel along with show-quality chrome plating or Silicone-based black powder coating •Systems feature Akrapovic’s in-house designed and tested, high-performance insert design for incredible power and famous sound – not old-school baffling •Systems include three-piece header, muffler body, heat shields, O2 sensor bung adapters and plugs, mounting hardware and complete installation instructions PART # DESCRIPTION SUG. RETAIL FOR 06-13 FXS/FXST/FLS/FLST, 06-13 FLHT/FLHX/FLHR/FLTR MODELS 1800-1325 Chrome $799.95

TANKS & OIL FILTERS DASHES & GAUGES Performance insert

PART # DESCRIPTION SUG. RETAIL FOR 06-13 FXS/FXST/FLS/FLST, 06-13 FLHT/FLHX/FLHR/FLTR MODELS (CONT) 1800-1326 Black $799.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

OPTIONAL NOISE REDUCTION INSERTS •Optional insert enables you to adjust the noise level yourself •Available for 2-into-2 and 2-into-1 Akropovic systems only •Sold each PART # 1861-0744

DESCRIPTION For 2-into-2 systems

SUG. RETAIL $46.95

PART # 1861-0745

DESCRIPTION For 2-into-1 systems

SUG. RETAIL $34.95

1861-0744

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

405


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

1800-1327

LUGGAGE SEATS & SISSY BARS EXHAUST 1800-1328

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1800-1329

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

OPEN LINE 2-INTO-2 SYSTEMS •Unmatched European craftsmanship, outstanding performance, design, and of course the unmistakable deep resonant sound of Akrapovic all come together here in these 2-into-2 systems •Highest quality materials are used throughout, including Austenitic (“surgical grade”) stainless steel along with show-quality chrome plating or Silicone-based black powder coating •Systems feature Akrapovic’s in-house designed and tested, high-performance silencer insert design for incredible power and famous sound – not old-school baffling •Systems include removable silencer inserts, heat shields and complete installation instructions PART # DESCRIPTION FOR 06-13 FXD/FXDWG MODELS 1800-1327 Chrome

SUG. RETAIL $799.95

FOOTRESTS & LICENSE PLATE FRAMES

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

406

PART # DESCRIPTION FOR 06-13 XL MODELS W/ MID CONTROLS 1800-13281 Chrome 1800-13291 Black 1

WHEELS & AXLES

Silencer insert SUG. RETAIL $749.95 749.95

Not for use with passenger footpegs.

OPTIONAL NOISE REDUCTION INSERTS •Optional insert enables you to adjust the noise level yourself •Available for 2-into-2 and 2-into-1 Akropovic systems only •Sold each

1861-0744

PART # 1861-0744

DESCRIPTION For 2-into-2 systems

SUG. RETAIL $46.95

PART # 1861-0745

DESCRIPTION For 2-into-1 systems

SUG. RETAIL $34.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING 1801-0534

AUDIO & COMMUNICATION LUGGAGE 1801-0535

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

1801-0531 1801-0530

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1801-0528

1801-0529

CABLES

BRAKES TANKS & OIL FILTERS SLIP-ON MUFFLERS •Just like the full systems, these are loaded with an exceptional array of Akropovic features •Unmatched European craftsmanship, outstanding performance, design, and of course the unmistakable deep resonant sound of Akrapovic; here with an Optional Sound Valve System that can even be adjusted on-the-fly •Highest quality materials are used throughout, including Austenitic (“surgical grade”) stainless steel along with show-quality chrome plating and Silicone-based black powder coating as listed •Optional Sound Valve Systems are available separately •Dresser muffler bodies with end cap measure 20” L (29” overall length with subheader pipe installed) and are 41/2” W x 31/2” T at polygonal exit that tapers to 31/2” round inlet end •Includes mufflers, subheaders with heat shields, clamps and complete installation instructions •Sold in pairs PART # DESCRIPTION SUG. RETAIL FOR 07-13 FLSTF/FLSTFB, 07 FXSTD MODELS 1801-0534 Chrome $1,149.95 FOR 07-10 FXST/B/C, 07-13 FLSTC, 08-11 FXCW/C MODELS 1801-0535 Chrome 1,149.95 FOR 06-13 FXD/FXDWG MODELS (EXCEPT 08-13 FXDF, 10-13 FXDWG, 12-13 FLD) 1801-0531 Chrome 1,049.95

PART # DESCRIPTION SUG. RETAIL FOR 06-13 FXDF/10-13 FXDWG MODELS 1801-0530 Chrome $1,049.95 FOR 06-13 FLHT/FLHX/FLHR/FLTR MODELS (EXCEPT 10 FLHX/FLTRX) 1801-0528 Chrome w/ chrome tips 1,149.95 1801-0529 Chrome w/ black tips 1,149.95 SLIP-ON MUFFLERS continued on next page

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

407


SECTION

6

WINDSHIELDS & FAIRINGS SLIP-ON MUFFLERS (CONT) TOURING 1801-0532

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE 1801-0533

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

408

PART # DESCRIPTION FOR 06-13 XL MODELS 1801-0532 Chrome 1801-0533 Black

SUG. RETAIL $1,049.95 1,049.95

OPTIONAL SOUND VALVE SYSTEMS FOR SLIP-ON MUFFLERS

1861-0733

•The perfect complement to Akropovic’s Slip-On Muffler line allows riders to easily adjust for the sound level they want without ever leaving the bike, or getting their hands dirty •World Class design and function uses investment cast stainless steel housings and high-temperature graphite bearings throughout •Valve systems are cable-actuated through a hand control that is mounted on-bike where owner can reach it •At every setting there is still the unmistakable, deeply resonant sound of Akrapovic •Sold in pairs PART # 1861-0733 1861-0734 1861-0735 1861-0736 1861-0737 1861-0738

DESCRIPTION For mufflers PART For mufflers PART For mufflers PART For mufflers PART For mufflers PART For mufflers PART

#s 1801-0528, 1801-0529 #1801-0530 #1801-0531 #s 1801-0532, 1801-0533 #1801-0534 #1801-0535

1861-0733

SUG. RETAIL $449.95 449.95 449.95 449.95 449.95 449.95

Internal view

CATALYTIC CONVERTERS FOR AKRAPOVIC MUFFLERS •Honeycomb metal structure which incorporates precious metals (palladium, rhodium and platinum) into its surface •Metals convert the poisonous carbon monoxide and unburned hydrocarbons found in exhaust gases into non-toxic carbon dioxide and water vapor •Sold in pairs NOTE: Designed specifically for mufflers listed. PART # 1861-0740

DESCRIPTION For mufflers PART #s 1801-0530, 1801-0531, 1801-0532, 1801-0533

SUG. RETAIL $304.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS PHANTOM II EXHAUST SYSTEMS

TOURING

•Brand New Paul Yaffe-inspired design •Curvy 2:1 custom stylized pipe features 2” primary pipes flowing into a 3.5” collector •Black ceramic-coated with four-piece chrome heatshields •Rebuildable/removable baffle gives a great throaty roar •Passenger-friendly design •Made in the U.S.A. PART # 1800-1515 1800-1514

DESCRIPTION For 12-13 Softail/Dyna models For 07-11 Softail models, 06-11 Dyna models

AUDIO & COMMUNICATION

SUG. RETAIL $1,387.95 1,387.95

LUGGAGE 1800-1515

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS BAFFLED PHANTOM PIPE EXHAUST SYSTEMS BY PAUL YAFFE

ENGINE

•Same wild 2:1 Phantom pipe by cutting-edge designer Paul Yaffe with a neighborhood-friendly baffle •2” primary pipes with a 3.5” collector body •Four-piece chrome stylized heat shields •Includes Domino billet end cap •Systems are SAE J2825 compliant •Made in the U.S.A. PART # 1800-1289

DESCRIPTION For 10-13 FLHT/FLHR/FLHX/FLTR

TRANSMISSION & DRIVELINE GASKETS & SEALS

1800-1289 SUG. RETAIL $1,388.95

PART # 1800-12471 1

DESCRIPTION For L85-09 FLT/FLHT/FLHR/FLTR/FLHX

SUG. RETAIL $1,388.95

ELECTRICAL

O2 sensor port plugs included for non-sensor applications.

LIGHTING

1800-0533

1800-0167

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS

1800-0231

DASHES & GAUGES

PHANTOM PIPE EXHAUST SYSTEMS BY PAUL YAFFE

FRAMES, SUSPENSION & FENDERS

•Wild 2:1 pipe by cutting-edge designer Paul Yaffe •2” primary pipes with a 31/2” collector body •Four-piece chrome stylized heat shields •PYO signature claw tip end cut (unless noted) •Available in left side drive (LSD) or right side drive (RSD) •Made in the U.S.A. PART # DESCRIPTION FOR 07-11 FXST/FLST MODELS (LSD) 1800-0533 Silver ceramic 1800-0534 Black ceramic FOR 86-06 FXST/FLST MODELS (LSD) 1800-0075 Silver ceramic 1800-0167 Black ceramic

FOOTRESTS & LICENSE PLATE FRAMES

1800-0232 SUG. RETAIL $1,120.95 1,120.95

PART # DESCRIPTION FOR CUSTOM SOFTAIL APPLICATIONS (RSD) 1 1800-0231 Black ceramic 1800-02321 Silver ceramic 1

1,120.95 1,120.95

SUG. RETAIL $1,120.95 1,120.95

Includes two O2 sensor ports with plugs.

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

409


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE

1800-0537

SEATS & SISSY BARS

1800-0799

EXHAUST FUEL/AIR SYSTEMS 1800-0768

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1860-0061

THREE-SHIELD X PIPES BY PAUL YAFFE •The latest exhaust offering from world-class pipe builder Paul Yaffe and the SuperTrapp Road Legends series •Dramatically styled 2” shotgun drag pipes are available in triple-chrome-plated, black ceramic or silver ceramic finish •Comes complete with baffles, three chrome heat shields, end caps and mounting hardware •Made in the U.S.A.

1802-0039

NOTE: O2 sensor port plugs are included for 86-06 Softail and 04-06 XL applications. PART # DESCRIPTION FOR 86-11 FLST/FXST/FXS 1800-0536 Black ceramic 1800-0537 Silver ceramic FOR 06-11 DYNA GLIDE MODELS 1800-0798 Chrome-plated 1800-0799 Black ceramic 1800-0800 Silver ceramic FOR 91-05 DYNA GLIDE MODELS 1800-0236 Chrome-plated

SUG. RETAIL $986.95 1,007.95 955.95 986.95 1,007.95 955.95

PART # DESCRIPTION FOR 91-05 DYNA GLIDE MODELS (CONT) 1800-0237 Black ceramic FOR 04-13 XL 1800-0768 Chrome-plated 1800-0769 Black ceramic 1800-0770 Silver ceramic OPTIONAL COMPONENTS 1860-0061 Repl. baffles for all X-Pipes (pr.) 1802-0039 Ridged end caps

SUG. RETAIL $986.95 955.95 986.95 1,007.95 87.95 143.95

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

410

13871451

2” CRACK PIPES BY PAUL YAFFE •Paul Yaffe designed these drag pipes for SuperTrapp’s Road Legends Series •2” pipes with a straight-through design; no baffles (includes mounting hardware) •Available in triple chrome-plated or black ceramic finish •Three-piece spot heat shields: two on the rear pipe, one on the front pipe •Custom designed heat shields have decorative cutouts •Made in the U.S.A. PART # DESCRIPTION FOR 07-11 FXS/FXST MODELS 1800-1147 Chrome 1800-1148 Black ceramic

1800-0008 SUG. RETAIL $924.95 945.95

PART # FOR 90-06 FXST MODELS 13871451 1800-0008

DESCRIPTION

SUG. RETAIL

Chrome Black ceramic

$924.95 945.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE 1800-1146 1800-0538 w/ optional end caps

MEAN MOTHERS™ DRAG PIPES

EXHAUST

•SuperTrapp’s Mean Mothers are now meaner and more powerful •True 21/2” stepped-performance pipes that post impressive performance gains on stock or built engines •A host of features: pre-installed, easy-to-remove baffles, sturdy and simple bracket system with fewer hardware pieces and pre-installed heat shields with OEM fasteners 1800-0004 •OEM fasteners on heat shields can be “broken” to replace just the heat shield if necessary •Standard end caps included •Choose from optional slash-cut and turnout end caps; both are infinitely adjustable •Made in the U.S.A. NOTE: O2 sensor plugs included for 86-06 Softail and 04-06 XL applications. PART # DESCRIPTION FOR 86-11 FXS/FXST/FLST 1800-0538 Shorty 1800-0539 Standard 1800-0540 Long 1800-0541 Staggered FOR 06-11 DYNA GLIDE 1800-1146 Staggered FOR 91-05 DYNA GLIDE 1800-0006 Standard

SUG. RETAIL $740.95 740.95 812.95 740.95 740.95

FUEL/AIR SYSTEMS ENGINE

1802-0000 PART # DESCRIPTION FOR 91-05 DYNA GLIDE (CONT) 1800-0005 Staggered FOR 07-08 FLHT/FLHX/FLHR/FLTR 1800-0542 Standard FOR 86-06 FLT/FLHT/FLH/FLHR/FLTR 1800-0004 Long FOR 04-13 XL 1800-0765 Staggered

SEATS & SISSY BARS

1802-0001 SUG. RETAIL $740.95 852.95 852.95

1802-0002

PART # DESCRIPTION REPLACEMENT COMPONENTS 1802-0000 Repl. standard end cap (ea.) 1802-0001 Optional turndown/ turnout end cap (ea.) 1802-0002 Optional slashdown/ slashout end cap (ea.)

SUG. RETAIL

TRANSMISSION & DRIVELINE GASKETS & SEALS

$43.95 43.95

ELECTRICAL

43.95

740.95

LIGHTING

740.95

1800-0962

1800-0965

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES 1800-0961

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

1800-0963

BLACK MEAN MOTHERS™ DRAG PIPES

FOOTRESTS & LICENSE PLATE FRAMES

•True 21/2” stepped-performance pipes that post impressive performance gains on stock or built engines •A host of features: pre-installed, easy-to-remove baffles, sturdy and simple bracket system with fewer hardware pieces and pre-installed heat shields with OEM fasteners to replace just the heat shield if necessary •Standard end caps included •Made in the U.S.A.

WHEELS & AXLES

NOTE: O2 sensor plugs included for non-sensor applications. PART # DESCRIPTION FOR 86-11 FXS/FXST/FLST 1800-0962 Shorty 1800-0965 Standard

SUG. RETAIL $740.95 740.95

PART # DESCRIPTION FOR 86-11 FXS/FXST/FLST (CONT) 1800-0961 Long 1800-0964 Staggered

SUG. RETAIL $740.95 740.95

PART # FOR 04-13 XL 1800-0963

DESCRIPTION Staggered

SUG. RETAIL $924.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

411


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

1800-1082

MEAN MOTHERS™ SIDE SWIPES •Side-swept look accentuates the lines of bike and angle of frame •13 lb. lighter than stock exhaust system •13/4” stainless steel headpipes •21/4” muffler bodies with removable baffles •One-piece heat shields •Includes standard chrome end caps •Made in the U.S.A. PART # DESCRIPTION FOR 08-11 FXCW/C, 09 FXSTSSE 1800-1082 Chrome

1800-1081 SUG. RETAIL $719.95

PART # DESCRIPTION FOR 08-11 FXCW/C, 09 FXSTSSE (CONT) 1800-1081 Black ceramic

SUG. RETAIL $719.95

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

2-INTO-2 FAT DUALS SYSTEM •Designed like a pair of battleship deck guns that look great and sound even better •1.75” primary headpipes with 2.5” heat shields •3.5” chrome muffler bodies with removable grooved chrome billet end caps •Weigh 10% less than stock and include O2 sensor port plugs for pre-07 applications •Made in the U.S.A.

CABLES

BRAKES

PART # 1800-1083

TANKS & OIL FILTERS

DESCRIPTION For 86-11 FXS/FXST/FLST

SUG. RETAIL $986.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

412

2-INTO-2 STAGGERED INTERNAL DISC EXHAUST SYSTEM •Features SuperTrapp tunable 3” internal disc mufflers with chrome taper slash end caps •Durable steel construction with brilliant chrome-plating •Includes 18 3” discs per muffler body, mounting hardware and heat shields •End cap is interchangeable with any 3” SuperTrapp end cap •Uses OEM heat shields and mounting bracket •Made in the U.S.A. NOTE: Will fit 95-06 models if mounting bracket DS-209930 or DS-209931 is used. PART # 1800-1049

DESCRIPTION For 86-94 FXST/FLST

SUG. RETAIL $822.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS

1802‑0118 108‑8021

1802‑0014

TOURING AUDIO & COMMUNICATION

1802‑0117 108‑7257 108‑8022

LUGGAGE 1800‑0958

1802‑0116

1802‑0016

1802‑0015

1802‑0017

1802‑0098

1802‑0018

1802‑0099

SEATS & SISSY BARS EXHAUST

2‑INTO‑1 LOW ROLLER EXHAUST SYSTEM •Chrome‑plated construction •Sleek, rolling‑wave style •Weighs 25% less than stock •Designed to increase exhaust flow and provide a deep Harley rumble •13/4” headpipes flow into 21/2” collector, then onto a 31/2” curved muffler body •Durable, pillow‑pack pacing offers superior silencing and durability •Includes chrome billet end cap, three‑piece heat shield set and O2 sensor port plugs for pre‑07 applications •Can be customized with optional end caps (sold separately) •Made in the U.S.A. SUG. PART # DESCRIPTION EXHAUST SYSTEM 1800‑0958 For 86‑11 FXS/FXST models STEEL END CAPS (ea.) 1802‑0014 Slash end cap 1802‑0118 Slash end cap, black 108‑8021 Fishtail end cap 108‑7257 Tapered end cap 1802‑0117 Tapered end cap, black (ea.) 108‑8022 Turnout/turndown end cap

RETAIL $924.95 99.95 76.95 99.95 54.95 76.95 99.95

FUEL/AIR SYSTEMS ENGINE 1802‑0035

PART # DESCRIPTION STEEL END CAPS (ea.) (CONT) 1802‑0116 Rolled, black (ea.) BILLET END CAPS (ea.) 1802‑0015 Fluted end cap 1802‑0016 Tapered end cap 1802‑0017 Grooved end cap 1802‑0018 Java Jug end cap PAUL YAFFE END CAPS (ea.) 1802‑0098 Holy Moly, black billet (ea.)

1802‑0036 SUG. RETAIL $76.95 99.95 99.95 99.95 99.95 139.95

1802‑0037

1802‑0038

PART # DESCRIPTION PAUL YAFFE END CAPS (ea.) (CONT) 1802‑0099 Holy Moly, chrome billet (ea.) 1802‑0035 Afterburner end cap, black billet 1802‑0036 Afterburner end cap, chrome billet 1802‑0037 Big Poppa end cap, chrome steel 1802‑0038 Claw end cap, chrome steel

SUG. RETAIL

$139.95

TRANSMISSION & DRIVELINE GASKETS & SEALS

176.95 176.95

ELECTRICAL

121.95 121.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES

1800‑0078

2‑INTO‑1 SUPERMEG SYSTEMS

TANKS & OIL FILTERS

•Increase horsepower while getting a glorious 1800‑1256 throaty exhaust note out of your exhaust •Straight‑through core design provides free‑flowing exhaust for crisp throttle response •Triple chrome plating or black ceramic finish •Integrated three‑piece heat shield that provides full coverage •Includes 20 4” discs, mounting bracket and hardware •Made in the U.S.A. NOTE: Not recommended for use on FXST/FLST models with Springer‑style saddlebags. PART # DESCRIPTION SUG. RETAIL FOR 12‑13 FXS/FXST/FLS/FLST MODELS 1800‑1372 Chrome $771.95 1800‑1373 Black ceramic 802.95 FOR 86‑11 FXS/FXST/FLST MODELS 1800‑0543 Chrome 771.95 1800‑0544 Black ceramic 822.95 FOR 90‑06 FXST/FLST MODELS 1800‑0078 Chrome 771.95 1800‑0551 Black ceramic 822.95 FOR 12‑13 DYNA GLIDE MODELS (EXCEPT FLD) 1800‑1374 Chrome 771.95 1800‑1375 Black ceramic 802.95

PART # DESCRIPTION SUG. RETAIL FOR 06‑11 DYNA GLIDE MODELS 1800‑0547 Chrome $771.95 1800‑0548 Black ceramic 822.95 FOR 91‑05 DYNA GLIDE MODELS 1800‑0078 Chrome 771.95 1800‑0551 Black ceramic 822.95 FOR 10‑13 FLHT/FLHR/FLTR MODELS 1800‑1255 Chrome 843.95 1800‑1256 Black ceramic 894.95 FOR 09 FLHT/FLHR/FLTR/FLHX MODELS 1800‑1052 Chrome 843.95 1800‑1053 Black ceramic 894.95

DASHES & GAUGES 1800‑1052 PART # DESCRIPTION SUG. RETAIL FOR 07‑08 FLHT/FLHR/FLTR/FLHX MODELS 1800‑0545 Chrome $843.95 1800‑0546 Black ceramic 894.95 FOR 85‑06 FLHT/FLT/FLHR/FLHX/FLTR MODELS 1800‑0076 Chrome 843.95 1800‑0550 Black ceramic 894.95 FOR 04‑13 XL MODELS 1800‑0766 Chrome 771.95 1800‑0767 Black ceramic 822.95 BAFFLE REPACKING KIT 1860‑0437 Fits all 2‑into‑1 Supermeg systems 28.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel‑injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

413


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

V‑5 2‑INTO‑1 SLIP‑ON 3/4 EXHAUST SYSTEM •The ultimate pipe for your V‑Rod •SuperTrapp’s external disc technology is incorporated into the company’s first 5” pipe for motorcycles •Provides a significant horsepower increase and deep throaty exhaust note; mounts to the stock headpipe •Weighs a whopping 21 lb. less than the stock system and tips the scales at a mere 12 lb. •Tunable disc system gives the rider the flexibility to set up the pipe for a specific type of riding (includes 12 5” discs) •By adding discs, exhaust sound and top‑end power increase; 1800‑0272 by removing discs, low‑end torque increases and exhaust note decreases •Features triple‑chrome‑plated mid pipe, heat shield and canister, stainless steel core and polished billet aluminum end cap •Uses OEM headpipes •Made in the U.S.A. PART # 1801‑0295

DESCRIPTION For 07‑08 VRSCX/AW/AWA

SUG. RETAIL $976.95

PART # 1800‑0272

DESCRIPTION For 02‑06 VRSCA/B/SE models

SUG. RETAIL $976.95

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

2‑INTO‑1 MEGAPHONE SYSTEMS

4MSS‑70883

825‑71358

•Patented SuperTrapp tunable disc technology •Adjust sound levels and powerband by adding or removing 4” external discs •Includes 12 4” discs, rebuildable core and packing •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 91‑98 DYNA GLIDE 825‑71358 Satin, high exit $658.95

PART # FOR 86‑03 XL 4MSS‑70883 4MSS‑70884

4MSS‑70884

DESCRIPTION SUG. RETAIL (EXCEPT 883C, 1200C) Satin $616.95 Polished 699.95

1800‑0577

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES 1800‑1223

BRAKES TANKS & OIL FILTERS 2‑INTO‑1 SILENT SERIES EXHAUST DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

414

FATSHOTS EXHAUST

1800‑0249

•2‑into‑2 system gives you a crisp throttle response and increased performance •Massive 2” diameter headpipes with high‑volume, disc‑tunable 4” SuperTrapp mufflers •Expertly finished in show‑quality chrome will definitely set a bike apart from the crowd •Includes 12 4” discs per muffler body and all required mounting hardware •Made in the U.S.A. PART # DESCRIPTION 1800‑12231 For 86‑11 FXS/FXST/FLST shotgun style 1800‑0249 For custom applications w/ 300/330mm wide tire (right side drive upswept shotgun‑style) 1

O2 sensor plugs included for non‑sensor applications.

SUG. RETAIL $1,017.95 1,110.95

1800‑0578

•Return your bike to near stock sound levels without returning to stock performance •Available in both tunable Megaphone and non‑tunable straight body designs •2:1 head pipe designs for maximum performance •2.5” collector provides maximum flow even on big‑bore motors •Three‑piece full‑coverage heat shields prevent blueing •Rebuildable core and packing •Includes 14 4” discs and mounting hardware •Made in the U.S.A. NOTE: Not recommended for use with Springer‑style saddlebags. PART # DESCRIPTION FOR 86‑11 FXS/FXST/FLST 1800‑05771 Straight 1800‑05791 Megaphone FOR 250MM WIDE TIRE APPLICATIONS W/ O2 SENSORS 1 1800‑0580 Straight 1800‑05781 Megaphone 1

SUG. RETAIL $822.95 822.95 822.95 822.95

O2 sensor plugs included for non‑sensor applications.

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel‑injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE 2-INTO-1 INTERNAL DISC EXHAUST SYSTEM

2-INTO-2 CROSSOVER EXHAUST SYSTEM

•Features SuperTrapp tunable 3” internal disc muffler with fishtail end cap •Durable steel construction with brilliant chrome plating •Includes O2 sensor ports •System includes 12 4” discs, mounting hardware and heat shields •End cap is interchangeable with any 3” SuperTrapp end cap •Made in the U.S.A.

•Features SuperTrapp tunable 3” internal disc mufflers with fishtail end caps •Durable steel construction with brilliant chrome plating •System includes 24 3” discs, mounting hardware and heat shields •End caps are interchangeable with any 3” SuperTrapp end cap •Made in the U.S.A.

PART # 1800-0552

DESCRIPTION For 07-11 FXS/FXST/FLST

SUG. RETAIL $955.95

PART # 62878082

DESCRIPTION For 97-06 FLST/FXST

SUG. RETAIL $1,706.95

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

XR-STYLE SYSTEM •Built of 304 series stainless steel (pipes turn a beautiful gold finish after being run) •13/4” headpipes exit into true reverse-cone megaphone mufflers •21/2” straight-through repackable cores (12 discs per pipe) •O2 sensor plugs included for non-sensor applications •Awesome sound and performance •Made in the U.S.A. PART # 1800-0771 81570883

DESCRIPTION For 04-13 XL For 86-03 XL (except 883C, 1200C)

SUG. RETAIL $924.95 924.95

1802-0126

ELECTRICAL

2-INTO-2 MEGAPHONE SYSTEM •Increase horsepower while getting a glorious throaty exhaust note •Satin-finished stainless steel •Include mounting bracket, 24 4” discs and hardware •Made in the U.S.A. PART # 1800-1111

DESCRIPTION For 09-12 XR1200/1200X

SUG. RETAIL $1,048.95

1802-0126

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS

1802-0096

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

2-INTO-2 TRUE DUAL HEADPIPES •Design adds a unique style •Include 2.25” chrome heat shields •Fit SuperTrapp SE series, Kerker FatShots slip-ons, SuperTrapp/Kerker Stouts or other 95-13 style mufflers •Hardware included •Made in the U.S.A. PART # DESCRIPTION CHROME HEAT SHIELDS 1802-0126 For 10-13 FLHT/FLHR/FLHX/FLTR 1802-0097 For 09 FLHT/FLHR/FLHX/FLTR 1802-00961 For 86-08 FLT/FLHT/FLHR/FLHX/FLTR

FOOTRESTS & LICENSE PLATE FRAMES

1802-0096

SUG. RETAIL $513.95 513.95 462.95

PART # DESCRIPTION BLACK HEAT SHIELDS 1802-0256 For 10-13 FLHT/FLHR/FLHX/FLTR 1802-0255 For 09 FLHT/FLHR/FLHX/FLTR 1802-02541 For 86-08 FLT/FLHT/FLHR/FLHX/FLTR 1

SUG. RETAIL $513.95 513.95 462.95

O2 bung plugs included for non-sensor applications.

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

415


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

1801‑0519

LUGGAGE

STOUT SLIP‑ON MUFFLERS •Massive 4” non‑tunable chrome or black ceramic bodies •Streamlined, internal tapered, billet aluminum end caps with recessed fasteners are preinstalled •Newly‑designed inlets flow better into OEM headpipe as well as SuperTrapp True Dual Headpipes •Provide a heavy, broad spread power curve with horsepower and torque gains over stock mufflers •Minimally (2 dB) louder than stock •Sold in pairs •Made in the U.S.A.

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

MEAN MOTHERS™ SLIP‑ON MUFFLERS •Same throaty drag pipe sound as the original Mean Mothers™ •21/4” stainless steel muffler bodies with black billet end caps •23/4” chrome replaceable heatshields are pre‑installed •33% weight savings and hp gain over stock mufflers •Sold in pairs •Made in the U.S.A. PART # 1801‑0435

DESCRIPTION For 09‑13 FLHT/FLHR/FLHX/FLTR and H‑D FL Trike models w/ dual exhaust

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

416

$534.95

SUG. RETAIL

PART # DESCRIPTION SUG. RETAIL FOR 95‑09 FLT/FLHT/FLHR/FLHX/FLTR 1801‑0519 Chrome $699.95 1801‑0586 Black 709.95

$699.95 709.95

1801‑0105 1801‑0424

ELECTRICAL

LIGHTING

PART # DESCRIPTION FOR 10‑13 FLHT/FLHR/FLHX/ FLTR (EXCEPT 10 FLHX/FLTRX) 1801‑0518 Chrome 1801‑0587 Black

SUG. RETAIL

1801‑0586

1802‑0015

1802‑0016

1801‑0104

SUPER ELITE 31/2” SLIP‑ON MUFFLERS •Race‑proven mechanical baffle for more horsepower and torque at less than 3 dB over a stock exhaust system •Internal heat shields completely eliminate body blueing •Expertly finished and chrome‑plated •Personalize the look with 12 different styles of end caps •End caps must be purchased separately •Made in the U.S.A. SUG. PART # DESCRIPTION SLIP‑ON MUFFLERS 1801‑0424 For 10 FLHX/FLTRX (ea.) 1801‑0373 For 10‑13 FLHT/FLHX/FLHR/FLTR (except 10 FLHX) (pr.) 1801‑0104 For 95‑09 FLHT/FLHX/FLHR/FLTR (pr.) 1801‑0105 For 97‑03 FLSTS, 05‑07 FLSTSC (pr.) PART # DESCRIPTION BILLET END CAPS (EA.) 1802‑0015 Fluted 1802‑0016 Tapered 1802‑0017 Grooved 1802‑0018 Java Jug STEEL END CAPS (EA.) 1802‑0014 Slash 1802‑0118 Slash, black

PART # FOR 06‑13 VRSCD/VRSCR 1800‑0572 1800‑0571

108‑8022

108‑7257

1802‑0118

1802‑0117

1802‑0116

$277.95 421.95 421.95 421.95

$99.95 99.95 99.95 99.95 99.95 76.95

•4” diameter adds a massive look •Patented SuperTrapp tunable disc technology allows you to adjust sound levels and powerband by adding or removing 4” external discs (24 included) •Black ceramic or chrome‑plated •Sold in pairs •Made in the U.S.A.

108‑8021

1802‑0014

1802‑0018

RETAIL

SUG. RETAIL

FATSHOTS SLIP‑ON MUFFLERS

1802‑0017

1802‑0098

1802‑0099

PART # DESCRIPTION STEEL END CAPS (EA.) (CONT) 108‑8021 Fishtail 108‑8022 Turnout/turndown 108‑7257 Tapered 1802‑0117 Tapered, black 1802‑0116 Rolled, black YAFFE END CAPS (EA.) 1802‑0098 Holy Moly, black billet

1802‑0035 1802‑0036 SUG. RETAIL $99.95 99.95 54.95 76.95 76.95

PART # YAFFE END 1802‑0099 1802‑0035 1802‑0036 1802‑0037 1802‑0038

1802‑0037

1802‑0038

DESCRIPTION SUG. RETAIL CAPS (EA.) (CONT) Holy Moly, chrome billet $139.95 Afterburner, black billet 176.95 Afterburner, chrome billet 176.95 Big Poppa, chrome billet 121.95 Claw, chrome billet 121.95

139.95

1800‑0572

1801‑0341

DESCRIPTION

SUG. RETAIL

Black ceramic Chrome

$616.95 637.95

PART # DESCRIPTION FOR 95‑13 FLT/FLHT/FLHR/FLHX/FLTR (EXCEPT 10 FLHX) 1801‑0341 Chrome

SUG. RETAIL $555.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel‑injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING 728-78053

AUDIO & COMMUNICATION 628-78053

728-78054

LUGGAGE CHROME MEGAPHONE MUFFLERS

628-78054

SLIP-ON MUFFLERS

•3” chrome slip-on mufflers in tapered, fishtail or turnout styles •End caps are interchangeable with any 3” cap •Each muffler includes 12 internal discs •Made in the U.S.A. PART # DESCRIPTION FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR (EXCEPT 10 FLHX) 628-78053 Turnout/turndown (pr.) 628-78054 Fishtail (pr.) 628-78055 Tapered (pr.)

SUG. RETAIL

•The epitome of style and performance in a tunable system that lets you determine tone and torque •Available in straight or slash-cut styles •Include 12 4” discs per muffler •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION FOR 09-13 FLT/FLHT/FLHX/FLHR/FLTR (EXCEPT 10 FLHX) 728-78053 Straight style 728-78054 Slash-cut style

SUG. RETAIL $658.95 658.95

$719.95 719.95 637.95

FUEL/AIR SYSTEMS

TRANSMISSION & DRIVELINE

•SuperTrapp’s internal-disc chrome slip-ons let you tune your exhaust for sound and back pressure at a very affordable price •Use with OEM headpipes to create a staggered dual system with SuperTrapp performance, sound and looks •Includes 12 3” inch discs per muffler •End caps are interchangeable with any 3” SuperTrapp end cap (except fishtails) •Made in the U.S.A. PART # DESCRIPTION 628-78088 For 99-13 Dyna Glide models (except FXDF, 10-13 FXDWG)

GASKETS & SEALS ELECTRICAL

LIGHTING

SUG. RETAIL $565.95

S/C ELITE UNIVERSAL MUFFLERS •Chrome-plated T-304 stainless steel body •Corrosion-resistant stainless steel perforated core •U.S. Forest Service approved spark arrestor design •Available in 17” or 19” lengths •Adjust sound levels and powerband by adding or removing 4” or 5” external discs (not included) •Sold each •Made in the U.S.A.

•Mufflers feature tunable 3” internal discs (12 discs in each muffler) •Beautiful triple nickel chrome-plated finish •End caps are interchangeable with any 3” SuperTrapp end cap •Repackable fiberglass baffle •Sold in pairs •Made in the U.S.A. DESCRIPTION For 97-03 FLSTS, 05-07 FLSTSC

SUG. RETAIL $719.95

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS

DESCRIPTION

SUG. RETAIL

1.75” i.d. inlet; uses 4” discs 2.00” i.d. inlet; uses 4” discs 2.25” i.d. inlet; uses 4” discs

$349.95 349.95 349.95

2.50” i.d. inlet; uses 5” discs

483.95

•4” polished stainless steel muffler measures 191/8” long with a 2” inlet •Universal mounting fits any style header pipes •Accepts any 4” accessories/ replacement parts •Sold each •Made in the U.S.A. DESCRIPTION 4” polished muffler

SLIP-ON FISHTAIL MUFFLERS

PART # 628-78056

UNIVERSAL 4” MEGAPHONE MUFFLER

PART # 426-20010

EXHAUST

ENGINE

TAPERED CHROME SLIP-ON MUFFLERS

PART # 17” MUFFLER 1802-0031 1802-0032 1802-0033 19” MUFFLER 1802-0034

SEATS & SISSY BARS

SUG. RETAIL $277.95

STAINLESS STEEL IDS SLIP-ON

DASHES & GAUGES

•A durable, highperformance slip-on designed specifically for Buell •Offset saddle bracket mount system developed with data from H-D life cycle testing •Internal disc design (includes 15 4” discs) means full adjustability and no soot deposits •Bolts directly to stock Z bracket; beautiful brushed finish •Made in the U.S.A. PART # 725-71235

DESCRIPTION For 99-02 S3, X1, 98 M2, S1

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES SUG. RETAIL $576.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

417


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

UNIVERSAL 3” CHROME MUFFLER •13/4”

i.d. for mounting on any style headpipes •Includes a slider bracket welded onto the back side for universal mounting •Accepts any 3” accessories/ replacement parts •145/8” long without end caps •Made in the U.S.A.

MIDPIPE CROSSOVER CONVERSION

5046506

NOTE: These mufflers do not come with end caps. Order desired end cap separately. (See 3” Accessories and Replacement Parts below.)

•Turns OEM 10 FLTRX/FLHX 2-into-1 into a 2-1-2 to give back dual exhaust look and sound that riders are looking for •Connects to stock headpipes •Does not include mufflers or end caps; all 10-13 FLHT/FLHR SuperTrapp and Kerker mufflers will fit crossover conversion •Includes heatshields •Made in the U.S.A.

PART # 3MSU‑1750

PART # 1802‑0120

DESCRIPTION 13/4” muffler

SUG. RETAIL $287.95

DESCRIPTION For 10 FLTRX/FLHX

SUG. RETAIL $410.95

5” REPLACEMENT DISCS •Fit V5 2-into-1 system •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 02‑11 V‑ROD VRSCA/B 5046506 5” discs (6-pk.) $33.95 5046512 5” discs (12-pk.) 62.95

ENGINE TRANSMISSION & DRIVELINE

3MSD‑2535

328‑93750

3MSD‑2035 4M3046 4M3046PS

GASKETS & SEALS 308‑3635

LIGHTING

CABLES

BRAKES TANKS & OIL FILTERS

4AM6506

300‑8173

ELECTRICAL

HANDLEBARS, CONTROLS & MIRRORS

4M3046S

4AM2120

304‑3034

3” ACCESSORIES AND REPLACEMENT PARTS

3AM6506

4M7206

•Made in the U.S.A. PART # 328‑93750 3MSD‑2535 3MSD‑2035 308‑3635 1860‑0249 300‑8173 304‑7203 304‑3034 3AM6506 304‑6512

4M7306

4” ACCESSORIES AND REPLACEMENT PARTS

DESCRIPTION Repl. end cap, fishtail (ea.) Repl. end cap, slash cut (ea.) Repl. end cap, tapered (ea.) Repl. end cap, large turndown/turnout (ea.) Repl. baffle for 2-into-1 and Touring mufflers Repl. core for 13/4” staggered duals Bolt pack kit (3 long bolts/3 short bolts) Repl. internal open end cap (3 bolt) Diffuser disc, 6-pk. Diffuser disc, 12-pk.

SUG. RETAIL $155.95 87.95 76.95 132.95 102.95 121.95 12.95 12.95 26.95 47.95

•Made in the U.S.A. PART # 4M3046PS 4M3046 4M3046S 4AM2120 4AM6506 404‑6512 4M7206 4M7306 400‑8208

DESCRIPTION Open end cap (racing only) (ea.) Aluminum end cap (ea.) Std. end cap (ea.) Exhaust shield (ea.) 4” discs (6-pk.) 4” discs (12-pk.) Std. repl. screws, holds up to 20 discs (6-pk.) Racing screws, holds up to 34 discs (15 minimum) (6-pk.) Repl. core megaphone, 2-1

SUG. RETAIL $28.95 31.95 24.95 25.95 26.95 47.95 18.95 40.95 127.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

418

EXHAUST END CAP

TRAPPCAPS

402‑1000

402‑1020

•The perfect way to cap any 4” external disc silencer •6061 billet aluminum, hand polished to a mirror finish •Run open for the ultimate in top-end power and sound; run closed for improved low-end torque and quieter operation •Sold each •Made in the U.S.A. PART # 402‑1000 402‑1020

DESCRIPTION Star billet Slotted wheel

SUG. RETAIL $155.95 155.95

1812‑0162

1812‑0194 •Polished end cap for SuperTrapp mufflers •PART #s 1812-0150 and 1812-0162 allow you to open up your exhaust for straight-through flow by simply turning a screw •Vortex design creates unique spiraling back pressure, altering sound and performance •Slight power gains when used on modified motors •Made in the U.S.A. •Sold each SUG. PART # 1812‑0162 1812‑0150 1812‑0194

DESCRIPTION For 3” dia. SuperTrapp external disc mufflers For 4” dia. SuperTrapp external disc mufflers Vortex style for 4” dia. SuperTrapp external disc mufflers

RETAIL $45.95 52.95 52.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel‑injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

1800-0554

EXHAUST FUEL/AIR SYSTEMS 1800-1258

SUPERMEG 2-INTO-1 SYSTEMS

ENGINE

•Increase horsepower with this popular 2-into-1 system •Deep, rumbling sound that’s sure to please •Design features a straight-through rebuildable core so exhaust can flow freely through system for quick acceleration •Triple chrome-plated or black ceramic finish •Integrated full-coverage heat shield •Includes mounting bracket and hardware •Made in the U.S.A.

TRANSMISSION & DRIVELINE GASKETS & SEALS

NOTE: Not recommended for Softail models with Springer-style saddlebags.

1800-1054

PART # DESCRIPTION FOR 12-13 FXST/FLST 1800-1368 Chrome 1800-1369 Black ceramic FOR 07-11 FXST/FLST 1800-0554 Chrome 1800-0555 Black ceramic FOR 90-06 FXST/FLST, 91-05 DYNA GLIDE 1800-0082 Chrome 1800-0562 Black ceramic FOR 12-13 DYNA GLIDE (EXCEPT FLD) 1800-1370 Chrome 1800-1371 Black ceramic FOR 06-11 DYNA GLIDE 1800-0558 Chrome 1800-0559 Black ceramic

SUG. RETAIL $699.95 771.95 699.95 771.95 699.95 771.95 699.95 797.95 699.95 771.95

PART # DESCRIPTION FOR 10-13 FLHT/FLHR/FLTR/FLHX 1800-1257 Chrome 1800-1258 Black ceramic FOR 09 FLHT/FLHR/FLTR/FLHX 1800-1054 Chrome 1800-1055 Black ceramic FOR 07-08 FLHT/FLHR/FLTR/FLHX 1800-0556 Chrome 1800-0557 Black ceramic FOR 85-06 FLT/FLHT/FLHX/FLHR/FLTR 1800-0080 Chrome FOR 07-13 XL 1800-0763 Chrome 1800-0764 Black ceramic

SUG. RETAIL $792.95 852.95 792.95 852.95 792.95 852.95 792.95

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

699.95 771.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

2-INTO-1 CHROME SLASH-CUT SYSTEMS WITH STRAIGHT-THROUGH CORE •Impressive horsepower increase •Unique three-piece heat shield for full coverage •System for Softail-style frames with wide tires requires offset engine placement •Made in the U.S.A.

DESCRIPTION 230mm system for Softail-style frames w/ wide tires

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

NOTE: Modification of mounting brackets may be required. PART # 12871470

FRAMES, SUSPENSION & FENDERS

SUG. RETAIL $699.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

419


SECTION

6

WINDSHIELDS & FAIRINGS TOURING 12878065

AUDIO & COMMUNICATION

1800‑0581

LUGGAGE 12878082

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

EXHAUST SYSTEMS •Available in 2‑into‑1 or 2‑into‑2 Fishtail crossover design, both with a brightly‑polished chrome finish •K3 baffle core designed for maximum exhaust flow and an attention‑grabbing exhaust note •Optional end caps let you change your look without changing pipes; choose from classic Fishtail, Tapered or Turndown that can be mounted in three positions •System includes full heat shield set and all necessary mounting hardware •End caps sold separately •Made in the U.S.A. PART # 1800‑0553 12878065 12878083 12878082 100‑78571 1

DESCRIPTION 2‑into‑1 system for 07‑11 FLST/FXST/FXS 2‑into‑1 system for 90‑06 FLST/FXST 2‑into‑2 system for 97‑06 FLST/FXST 2‑into‑2 system for 86‑96 FLST/FXST Mikuni P.A.T. performance baffle for PART #S 12878082 and 12878065

2‑INTO‑1 SPORTSTER SYSTEMS •Lighter‑than‑ stock construction 1800‑0582 •Deep signature exhaust tone •High‑flow 2” diameter baffle for increased performance •Available with brushed aluminum or carbon fiber canisters •Longer‑lasting “Pillow Pack” packing •Rebuildable core and packing •Polished stainless steel turndown end caps with rolled edge •Made in the U.S.A.

SUG. RETAIL $781.95 904.95 1,450.95 1,450.95

PART # FOR 86‑03 XL 1800‑0581 1800‑0582

143.95

Not recommended for use with fuel‑injected models.

DESCRIPTION Brushed aluminum Carbon fiber

SUG. RETAIL $822.95 822.95

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS

1801‑0521

STOUT SLIP‑ON MUFFLERS

1801‑0521

•Massive 4” non‑tunable chrome or black ceramic bodies •Streamlined, internal tapered, billet aluminum end caps with recessed fasteners are preinstalled •Newly‑designed inlets flow better into OEM headpipe as well as SuperTrapp True Dual Headpipes •Provide a bold, strong power curve from mid‑range on up with a significant horsepower and torque gain over stock mufflers •Classic deep and heavy Kerker rumble is 5 dB over stock •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION FOR 10‑13 FLHT/FLHR/FLHX/FLTR (EXCEPT 10 FLHX/FLTRX) 1801‑0521 Chrome 1801‑0589 Black ceramic

SUG. RETAIL

$689.95 709.95

PART # DESCRIPTION SUG. RETAIL FOR 95‑09 FLT/FLHT/FLHR/FLHX/FLTR 1801‑0520 Chrome $689.95 1801‑0588 Black ceramic 709.95

1801‑0589

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

420

31/2” SLIP‑ON MUFFLERS

1801‑0423 w/ optional end cap 1802‑0035

1801‑0015

•K3 baffle core designed for maximum exhaust flow and an attention‑grabbing exhaust note •Mufflers do not include end caps (except PART #1801‑0015, which includes Java Jugs end caps) 12878030 •Optional end caps let you change your look without changing pipes •End caps sold separately •Sold in pairs (unless noted) •Made in the U.S.A. PART # 1801‑0423 1801‑0374 12878020

DESCRIPTION For 10 FLHX/FLTRX (ea.) For 10‑13 FLHT/FLHX/FLHR/FLTR and H‑D FL Trike (except 10 FLHX) For 95‑09 FLT/FLHT/FLHX/FLHR/FLTR

SUG. RETAIL $277.95 421.95 421.95

PART # 1801‑0015 12878010 12878030

DESCRIPTION For 95‑09 FLT/FLHT/FLHX/FLHR/FLTR (include Java Jug end caps) For L85‑94 FLT/FLHT For 97‑03, 05‑07 FLSTS/C

SUG. RETAIL $524.95 421.95 421.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel‑injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS 100-7857

12878045

MIKUNI P.A.T. CORE SLIP-ON MUFFLERS

TOURING

•Mikuni’s Joe Minton designed these hot slip-on mufflers that provide maximum performance when used with the Mikuni P.A.T. System •Muffler contains a special straightthrough core for the least-restrictive exhaust flow that produces more power and a blood-churning sound •Core is wrapped with Silent Sport™ packing for superior sound and greater durability than ordinary fiberglass •Mufflers do not include end caps; end caps are available separately •Sold in pairs •Made in the U.S.A.

12878035

PART # DESCRIPTION SUG. RETAIL CORE SLIP-ON MUFFLERS 12878045 For 95-13 FLHR, FLTR, FLHT, FLT, FLHX $421.95 12878035 For 97-03 FLSTS, 05-07 FLSTSC 452.95 BAFFLES 100-7857 Mikuni P.A.T. performance baffle 143.95

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

K SERIES SLIP-ON MUFFLERS

TRANSMISSION & DRIVELINE

•13 lb. lighter than stock •Deep signature exhaust tone •High-flow 2” diameter baffle for optimum performance •Expertly-finished brushed aluminum impact extruded canisters •Rebuildable core and packing •Sold in pairs •Made in the U.S.A. PART # 1801-0176

DESCRIPTION For 06-13 VRSCD/VRSCR

GASKETS & SEALS

SUG. RETAIL $513.95

ELECTRICAL

108-7257

108-8022

108-8021

LIGHTING

1802-0117 1802-0014

HANDLEBARS, CONTROLS & MIRRORS CABLES

1802-0017

1802-0016

1802-0015

BRAKES

1802-0118

TANKS & OIL FILTERS

1802-0116

END CAPS FOR KERKER 31/2” MUFFLERS •Fits complete systems and slip-on mufflers •Sold each •Made in the U.S.A. PART # STEEL END CAPS 108-8021 108-8022 108-7257 1802-0117 1802-0014 1802-0118 1802-0116

1802-0037

1802-0018

DASHES & GAUGES

1802-0038

FRAMES, SUSPENSION & FENDERS

1802-0035 1802-0036

DESCRIPTION Fishtail end cap Turnout/Turndown end cap Tapered end cap Tapered end cap, black Slash end cap Slash end cap, black Rolled, black

SUG. RETAIL $99.95 99.95 54.95 76.95 99.95 76.95 76.95

PART # BILLET END CAPS 1802-0015 1802-0016 1802-0017 1802-0018 YAFFE END CAPS 1802-0035 1802-0036 1802-0037 1802-0038

DESCRIPTION

SUG. RETAIL

Fluted end cap Tapered end cap Grooved end cap Java Jug end cap

$99.95 99.95 99.95 99.95

Afterburner, black billet Afterburner, chrome billet Big Poppa, chrome billet Claw, chrome billet

176.95 176.95 121.95 121.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

421


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

1802-0252

LUGGAGE 1802-0121

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

2 INTO 2 DUAL HEADER SYSTEMS •Reduces heat transmission to the rider and passenger by routing the exhaust under the frame instead of under the seat •Lighter system that offers more flow and makes more top-end power than the factory system •Features 13/4” 16-gauge mandrel bent, interconnected headers and 220° full-coverage heat shields •Front pipe crosses over to the left side and is 1802-0121 securely mounted to the transmission oil pan •Crossover pipe is formed from the 17/8 tubing for increased w/ 1801-0414 mufflers ground clearance and no cross-sectional area loss •Hidden inter-connect for maximum top-end horsepower, improved low-end torque and sound dampening •Headers systems are available in a high-gloss chrome finish and full-coverage heat shields are finished in black Jet-Hot® high-performance coating with chrome-plated headers •PART #s 1802-0121 and 1802-0252 include two 18mm O2 sensor ports, plugs and all mounting hardware •PART #s 1802-0122 and 1802-0253 include two 18mm sensor ports with plugs and two 12mm sensor ports with plugs •Header systems accept any 95-13 OEM-style dresser mufflers (sold separately) •O2 sensor ports and plugs, gaskets and all mounting hardware included •Use any Khrome Werks™ or other bagger muffler set •Made in the U.S.A. PART # DESCRIPTION FOR 09-13 FLHT/FLHX/FLTR/FLHR 1802-0122 Chrome headers 1802-0253 Headers w/ black shields

SUG. RETAIL $525.95 624.95

PART # DESCRIPTION FOR 95-08 FLHT/FLHX/FLTR/FLHR 1802-0121 Chrome headers 1802-0252 Headers w/ black shields

SUG. RETAIL $525.95 624.95

BRAKES TANKS & OIL FILTERS 1801-0628

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

422

1801-0630

4” HP-PLUS® TOURING AND PERFORMANCE SLANT DOWN MUFFLERS •Constructed from one-piece 16-gauge steel tubing muffler shell with interchangeable baffle inserts •Deep, mellow exhaust tone with horsepower and torque gains over stock mufflers •Steel baffle core is first machine wrapped with stainless steel wool, followed by a high-temperature fiberglass blanket for acoustic longevity assurance •Performance version is designed to enhance top-end power while retaining good low-end torque •Touring version trades minimal top-end output for mile after mile of rumbling exhaust tone •Uses factory mounting hardware and clamps •Available in highly polished duplex nickel chrome or a high-temperature, Jet-Hot® black ceramic coating •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION FOR 95-13 FLHT/FLHR/FLTR/FLHX 1801-0628 Chrome (touring) 1801-0629 Chrome (performance) 1801-0630 Jet-Hot® black (performance)

SUG. RETAIL $549.95 549.95 649.95

PART # DESCRIPTION REPLACEMENT BAFFLE INSERTS (EA.) 1860-0620 Touring insert 1860-0621 Performance insert

SUG. RETAIL $92.95 92.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS 1801-0415

TOURING AUDIO & COMMUNICATION 1801-0414

LUGGAGE SEATS & SISSY BARS 1801-0416

EXHAUST

3.50” HP-PLUS® TOURING MUFFLERS •Chrome mufflers increase horsepower and torque with a distinctive deep, throaty, but quieter sound •All new HP-Plus® patented dual-chamber absorptive baffles – large, short front absorptive chamber mutes deceleration popping •Long, rear absorptive chamber features HP-Plus resonator – both chambers are wrapped with a laminated muffler packing consisting of a thin layer of stainless steel under an ultra-high-temperature basalt wool •Stainless steel packing ensures long life for the high-frequency absorptive basalt wool •Dual-layer packing covers the complete length of the baffle to minimize body discoloration and to absorb the annoying higher frequencies •Low-speed torque is improved over our 3.00” mufflers; overall decibel level is reduced while still retaining high-quality, deep Khrome Werks signature sound •Fit models equipped with OEM crossover or aftermarket “True Duals” systems •Utilize factory mounting hardware and clamps •Sold in pairs •Made in the U.S.A. •U.S. patent 5,173,576 NOTE: ECM unit may need to be recalibrated if used with free-flowing air cleaners and/or modified engines. Muffler shells may discolor if ECM units are not calibrated correctly. NOTE: These mufflers are designed for use on closed-course competition motorcycles only and do not conform to U.S. EPA noise emission standards.

PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE MODELS 1801-0414 Slash down $459.95 1801-0415 Slash up 459.95 1801-0416 Tapered 459.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1801-0418

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1801-0419

CABLES

BRAKES 1801-0438

TANKS & OIL FILTERS

1801-0598

HP-PLUS® TOURING LITE MUFFLERS

•3” and 3.5” diameter Touring Lite line of mufflers has been completely redesigned, retaining the great performance and quality sound •New features include 16-gauge one-piece shells, upgraded baffle design, bolt and nut baffle installation, and upgraded acoustical wrap materials •One-piece chrome or Jet-Hot® black coated shell eliminates possibility of leaks and transition screws loosening or stripping •Redesigned baffle is machine-wrapped with a laminated muffler packing consisting of a thin layer of stainless steel under high- temperature basalt wool installed with 1/4”-20 bolts and nuts – an improvement over the #10 screws •Stainless steel packing ensures long life for high-frequency absorptive basalt wool •Dual-layer packing covers the complete length of the baffle, minimizing muffler body discoloration and absorbing the annoying higher frequencies •Fit models equipped with OEM crossover or aftermarket “True Duals” systems •Utilize factory mounting hardware and clamps •Sold in pairs •Made in the U.S.A. FOR 95-13 FLT/FLHT/FLHX/FLTR/FLHR AND H-D FL TRIKE MODELS (EXCEPT 10 FLTRX/FLHX) PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION CHROME 3” MUFFLERS CHROME 3.5” MUFFLERS 1801-0417 Slash down $349.95 1801-0438 Slash up 1801-0418 Slash down w/ ribs 379.95 1801-0439 Slash down 1801-0419 Tapered 349.95

SUG. RETAIL $399.95 399.95

PART # DESCRIPTION JET-HOT® BLACK 3.5” MUFFLER 1801-0598 Slash down

SUG. RETAIL $499.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

423


SECTION

6

WINDSHIELDS & FAIRINGS TOURING

1801-0524

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

1801-0147

1801-0145

EXHAUST FUEL/AIR SYSTEMS ENGINE

1801-0146

1801-0153

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

424

1801-0624

3” HP-PLUS® SLIP-ON MUFFLERS •Patented steel construction baffle now features more high-temperature fiberglass packing, provides significant gains in horsepower and torque and exhibits a distinctive, throaty sound •Use all factory mounting hardware •OEM heat shields may be retained •Sold in pairs •Made in the U.S.A. •U.S. patent 5,173,576

1801-0621

NOTE: ECM units on fuel-injected models need to be recalibrated if used with free-flowing air cleaners and/or modified engines. Muffler shells may discolor if ECM units are not calibrated correctly. NOTE: These mufflers are designed for use on closed-course competition motorcycles only and do not conform to U.S. EPA noise emission standards. CHROME PART # DESCRIPTION SUG. RETAIL FOR 07-13 FXST/FLST MODELS (EXCEPT FXS/ FXSTD/FLS/FLSTF/FLSTN/FLSTSB/FLSTSC) 1801-0148 Slash cut $294.95 1801-0156 Tapered 294.95 1801-0524 Slant down 309.99 FOR 07-13 FXSTD/FLSTF 1801-0150 Slash cut 294.95 1801-0158 Tapered 294.95 FOR 07-13 FLSTN, 08-11 FLSTSB 1801-0152 Slash cut 294.95 1801-0620 Slash down 294.95 1801-0160 Tapered 294.95 BLACK PART # DESCRIPTION FOR 07-13 FLSTN, 08-11 FLSTSB 1801-0621 Slash down FOR 08-13 FXDF, 10-13 FXDWG 1801-0627 Slash down

SUG. RETAIL $369.95 369.95

PART # DESCRIPTION FOR 05-06 FLSTN 1801-0151 Slash cut 1801-0160 Tapered FOR 00-06 FXST/C/S, FLST/C (WITH CROSSOVER CONNECTION) 1801-0147 Slash cut FOR 00-06 FLSTF/FXSTD (WITH CROSSOVER CONNECTION) 1801-0149 Slash cut FOR 08-13 FXDF, 10-13 FXDWG 1801-0291 Slash down

SUG. RETAIL $269.95 294.95

309.95

299.95 294.95

PART # DESCRIPTION SUG. RETAIL FOR 06-13 FXD (EXCEPT 10-13 FXDWG, FXDF, FLD) 1801-06261 Slash down $359.95 FOR 95-05 FXD 1801-06241 Slash cut 369.95

PART # DESCRIPTION SUG. RETAIL FOR 06-13 FXD (EXCEPT 10-13 FXDWG, FXDF, FLD) 1801-0622 Slash cut $294.95 1801-0623 Tapered 294.95 FOR 95-05 FXD 1 1801-0145 Slash cut 274.95 1801-01531 Tapered 274.95 FOR 04-13 XL MODELS (WITH CROSSOVER CONNECTION) 1801-0146 Slash down 309.95 1801-0154 Tapered 309.95 1

Will fit 91-94 models if mounting bracket DS-209936 is used.

PART # DESCRIPTION FOR 04-13 XL MODELS (WITH CROSSOVER CONNECTION) 1801-0625 Slash down 1

SUG. RETAIL

$379.95

Will fit 91-94 models if mounting bracket DS-209936 is used.

SOUND REDUCTION KIT •Easy, bolt-in sound reduction for 3” HP-Plus® mufflers •Takes off 4dB at idle and improves low-end torque – minimal loss of top-end horsepower •The machined discs with tapered bosses fit into each end of the patented resonator near the exit end of the mufflers and are retained by the supplied bolts and nuts •This kit is designed to use with three-ball style resonators that are 6.50” long •Will also fit most other mufflers (four-ball style resonators) if 1/4”-20 x 11.00” threaded rods are substituted for the supplied bolts •Installation requires removal of the mufflers •Kit includes machined discs and two 7.50” 1/4”-20 bolts and two PART # DESCRIPTION prevailing torque nuts 1861-0806 Sound reduction kit •Made in the U.S.A.

SUG. RETAIL $19.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

1800-1354

FUEL/AIR SYSTEMS ENGINE

1800-1355

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL 1800-1349

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1800-1350

CABLES

BRAKES

CALIBER TRUE DUAL CROSSOVER AND CROSSUNDER EXHAUST SYSTEMS •High-performance True Dual systems with Samson’s Quad Chrome or Sinister black ceramic finish •Offers performance boosts in horsepower and torque while improving fuel efficiency •True Dual crossover or crossunder, four-step headers run from 13/4” at the port, steps to 17/8”, then 2” and finish in 4” muffler bodies 1800-1351 •Headers are covered by 21/4” full-coverage chrome heat shields that flow smoothly into the muffler •Mufflers are finished with a chrome billet end cap and feature removable Varitech baffles; PART #1800-1350 features Decibel Killer baffles that deliver a rich tone without all the “noise” •Optional high-performance baffles available separately for increased flow; for use with 4” mufflers only •Dual O2 sensor ports accept OEM and aftermarket closed-loop fuel management systems •Mounting hardware included •Made in the U.S.A. NOTE: L85-06 applications may require the separate purchase of O2 sensor port plugs; see page 476. PART # DESCRIPTION FOR 10-13 FLHT, FLHX, FLTR, FLHR 1800-1354 Crossover headers w/ chrome heat shields and 29” chrome mufflers 1800-1355 Crossover headers w/ black heat shields and 29” black mufflers 1800-1349 Crossunder headers w/ chrome heat shields and 30” chrome mufflers

SUG. RETAIL

$999.95 999.95 899.95

PART # DESCRIPTION FOR 10-13 FLHT, FLHX, FLTR, FLHR (CONT) 1800-13501 Crossunder headers w/ chrome heat shields and 30” chrome mufflers 1800-1351 Crossunder headers w/ chrome heat shields and 35” chrome mufflers 1861-0552 Optional high-performance baffle; 21/2” i.d. (ea.) 1

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

SUG. RETAIL

$899.95 899.95 138.95

Features Decibel Killer baffles.

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

TANKS & OIL FILTERS

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

425


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

1800-1338

1800-1342

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS 1800-1340

ELECTRICAL

LIGHTING 1800-1518

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS

1800-1344

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

426

CALIBER POWERFLOW III 2-INTO-1 EXHAUST SYSTEMS

1800-1346

•The third generation of the horsepower-inducing Powerflow series is the most powerful yet •Powerflow III 4” 2-into-1 collector with 13/4” head pipes •Power Chamber condenses and intensifies exhaust flow to produce 20% or more horsepower and torque •Full-coverage removable heat shields with Samson’s Quad Chrome or Sinister black ceramic coating •O2 sensor ports accept OEM and aftermarket sensors •Burly 4” muffler features removable baffle and chrome end cap •Made in the U.S.A. PART # CHROME 1800-1434 1800-1338 1800-1342 1800-1340

DESCRIPTION For For For For

12-13 86-11 10-13 95-08

FXS, FLS, FLST FXS, FXST, FLST FLHT, FLHX, FLHR FLHT, FLHX, FLTR, FLHR

SUG. RETAIL $599.95 599.95 599.95 599.95

PART # CHROME (CONT) 1800-1436 1800-1518 1800-1344 1800-1346

DESCRIPTION For For For For

12-13 12-13 06-11 04-13

FXDB/FXDC/FXDWG/FXDF FLD FXD XL

SUG. RETAIL $599.95 599.95 599.95 599.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION CALIBER POWERFLOW III 2-INTO-1 EXHAUST SYSTEMS (CONT)

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE

1800-1339

SEATS & SISSY BARS

1800-1341

EXHAUST FUEL/AIR SYSTEMS ENGINE

1800-1343 1800-1519

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING

1800-1345 PART # BLACK 1800-1435 1800-1339 1800-1343 1800-1341

DESCRIPTION For For For For

12-13 86-11 10-13 95-08

1800-1347 SUG. RETAIL

FXS, FLS, FLST FXS, FXST, FLST FLHT, FLHX, FLHR FLHT, FLHX, FLTR, FLHR

$599.95 599.95 599.95 599.95

PART # BLACK (CONT) 1800-1437 1800-1519 1800-1345 1800-1347

DESCRIPTION For For For For

12-13 12-13 06-11 04-13

SUG. RETAIL

FXDB/FXDC/FXDWG/FXDF FLD FXD XL

$599.95 599.95 599.95 599.95

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS 1800-0693

DASHES & GAUGES

1800-0694

FRAMES, SUSPENSION & FENDERS

TRUE DUALS FOR SOFTAIL •”Quad” chrome finish offers a lustrous, long-lasting shine •Offers increased horsepower and torque while improving gas mileage •21/4”, 220° full-coverage heat shields flow smoothly into non-baffled Longtail mufflers •Completely assembled and ready to install •Made in the U.S.A. PART # DESCRIPTION FOR 07-11 FXS, FXST, FLST MODELS 1800-0693 True Duals w/ 28” Longtail mufflers 1800-0694 True Duals w/ 39” Cholo Longtail mufflers 1800-1194 True Duals w/ 36” Mini Cholo Longtail mufflers

SUG. RETAIL $899.95 899.95 899.95

FOOTRESTS & LICENSE PLATE FRAMES

1800-1194

PART # DESCRIPTION FOR 07-11 FXS, FXST, FLST MODELS (CONT) 1800-1197 True Duals w/ 33” Longtail mufflers FOR 95-06 FXST, FLST 1800-1198 True Duals w/ 33” Longtail mufflers

SUG. RETAIL $899.95 899.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

427


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE

1802-0221

1802-0220 Left

1800-1191

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1802-0203

1802-0220 Right

1801-0367

ENGINE TRANSMISSION & DRIVELINE

1801-0370

1801-0599

1801-0600

TRUE DUAL CROSSOVER HEADERS AND MUFFLERS FOR SOFTAILS GASKETS & SEALS ELECTRICAL

•13/4” True Dual crossover headers with 21/4” full-coverage heat shields •Finished with Samson’s exclusive Quad Chrome or Sinister black ceramic coating •Clean “seamless” transition between headers and mufflers •Muffler brackets and shift rod included •Headers and mufflers sold separately; mufflers are available with or without integrated baffles •Made in the U.S.A. NOTE: Header pipes and mufflers listed will not interchange with OEM components.

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

PART # DESCRIPTION SUG. RETAIL TRUE DUAL CROSSOVER HEADER PIPES ONLY FOR 12-13 FXS/FLS/FLST 1802-0220 Chrome $599.95 1802-0221 Black 599.95 TRUE DUAL CROSSOVER HEADER PIPES ONLY FOR 07-11 FXS/FXST/FLST 1800-1191 Chrome 599.95 1802-0203 Black 599.95 TRUE DUAL CROSSOVER HEADER PIPES ONLY FOR 95-06 FXST/FLST 1800-1192 Chrome 599.95 21/4” CHROME MUFFLERS FOR TRUE DUAL CROSSOVER HEADER SYSTEMS ONLY 1801-0367 36” Longtail mufflers w/ baffles 399.95

1801-0371

PART # DESCRIPTION SUG. RETAIL 21/4” CHROME MUFFLERS FOR TRUE DUAL CROSSOVER HEADER SYSTEMS ONLY (CONT) 1801-0368 36” Mini Cholo Longtail mufflers w/o baffles $399.95 1801-0369 33” Mini Cholo Longtail mufflers w/ baffles 399.95 1801-0370 33” Longtail mufflers w/o baffles (4” dia.) 399.95 1801-0371 28” rolled-edge straight-cut mufflers w/ baffles 399.95 1801-0600 30” round muffler w/ removable baffles and billet end caps (4” dia.) 599.95 21/4” BLACK MUFFLERS FOR FXST, FLST TRUE DUAL CROSSOVER SYSTEMS ONLY 1801-0599 30” round muffler w/ removable baffles and billet end caps (4” dia.) 599.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

428

1800-0188 Right w/ fishtail mufflers 1800-0188 Left w/ fishtail mufflers DS-200139

DUAL EXHAUST CROSSOVER SYSTEMS •”True Dual” header pipes are chrome plated and heli-arc welded for strength •Improved mounting for more ground clearance •Header pipes include 2” full-coverage heat shields, mounting brackets and clamps •Header systems and mufflers sold separately •Made in the U.S.A. NOTE: On models with saddlebags, always check clearance before running engine.

DS-200133

NOTE: Header pipes and mufflers listed will not interchange with OEM components. PART # DESCRIPTION CROSSOVER HEADER PIPES ONLY 1800-0529 For 07-11 FXST and FLST models 1800-0188 For 95-06 FXST and FLST models

SUG. RETAIL $599.95 599.95

PART # DESCRIPTION SUG. RETAIL 3” CHROME SILVER BULLET™ MUFFLERS FOR CROSSOVER HEADER PIPES ONLY DS-200139 26” Slash-cut w/ baffles $349.95 DS-200133 27” Fishtail w/ baffles 499.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION 1800-1449

1800-1448

LUGGAGE SEATS & SISSY BARS EXHAUST 1800-1451

1800-1450

FUEL/AIR SYSTEMS ENGINE

1800-1452

TRANSMISSION & DRIVELINE GASKETS & SEALS

1800-1455

ELECTRICAL

LIGHTING 1800-1356

1800-1193

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES 1800-1357

TRUE DUALS FOR FXS/FXST/FLS/FLST

Longtail Fishtail •Features a full-diameter rear pipe for optimal flow and performance •Headpipes are covered with 220° heat shield to mask any discoloration; weigh less and sound better than double-wall pipes with the same shielding results •21/4” muffler bodies with integrated, non-removable, fuel-injection-friendly baffles •Great traditional fishtail looks from the people who know fishtails or the sleek, unique longtails which are 2” longer on the bottom of the tail •Mounting brackets and hardware included •Made in the U.S.A. NOTE: Muffler bodies are measured from the bottom of the fishtail to the beginning of the muffler body, excluding the inlet. PART # DESCRIPTION FOR 12-13 FXS/FLS/FLST MODELS 1800-1448 True Duals w/ 23.5” Fishtail mufflers 1800-1449 True Duals w/ 28.5” Fishtail mufflers 1800-1450 True Duals w/ 23.5” Longtail mufflers 1800-1451 True Duals w/ 28.5” Longtail mufflers 1800-1452 True Duals w/ 39” Cholo Longtail mufflers 1800-1453 True Duals w/ 36” Cholo Longtail mufflers 1800-1455 True Duals w/ 33” Longtail mufflers FOR 07-11 FLST/FXS/FXST MODELS 1800-0512 True Duals w/ 23.5” Fishtail mufflers 1800-0513 True Duals w/ 28.5” Fishtail mufflers 1800-0514 True Duals w/ 23.5” Longtail mufflers

SUG. RETAIL $899.95 899.95 899.95 899.95 899.95 899.95 899.95 899.95 899.95 899.95

PART # DESCRIPTION SUG. RETAIL FOR 07-11 FLST/FXS/FXST MODELS (CONT) 1800-0515 True Duals w/ 28.5” Longtail mufflers $899.95 1800-0505 True Duals w/ 39” Cholo Longtail mufflers 899.95 1800-1193 True Duals w/ 36” Mini Cholo Longtail mufflers 899.95 1800-1195 True Duals w/ 28” rolled-edge, straight-cut mufflers 899.95 1800-1199 True Duals w/ 33” Longtail mufflers 899.95 1 1800-1356 True Duals w/ 33” Longtail mufflers (40° upsweep) 899.95 1 1800-1357 True Duals w/ 33” Longtail mufflers (40° upsweep) (non-baffled) 899.95 1

Shift rod included. TRUE DUALS FOR FXS/FXST/FLS/FLST continued on next page.

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

429


SECTION

6 TRUE DUALS FOR FXS/FXST/FLS/FLST (CONT)

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE

1800-0189 Right 1800-0189 Left

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS 1800-0190 Right

1800-0190 Left

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1800-0191 Right 1800-0191 Left

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES

1800-0192 Right

1800-0192 Left

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

1800-1196 1800-0394 1800-1200

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

430

PART # DESCRIPTION FOR 95-06 FLST/FXST MODELS 1800-0189 True Duals w/ 23.5” 1800-0190 True Duals w/ 28.5” 1800-0191 True Duals w/ 23.5” 1800-0192 True Duals w/ 28.5”

SUG. RETAIL Fishtail mufflers Fishtail mufflers Longtail mufflers Longtail mufflers

$899.95 899.95 899.95 899.95

PART # DESCRIPTION FOR 95-06 FLST/FXST MODELS (CONT) 1800-0394 True Duals w/ 39” Cholo Longtail mufflers 1800-1196 True Duals w/ 28” rolled-edge, straight-cut mufflers 1800-1200 True Dual w/ 33” Longtail mufflers

SUG. RETAIL $899.95 899.95 899.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE 1800-1454

SEATS & SISSY BARS

1800-1456

TRUE DUAL CROSSOVER EXHAUST SYSTEMS W/ REMOVABLE BAFFLES

EXHAUST

•High-performance True Dual system delivers better performance and reduces heat from the rear cylinder by using a free-flowing rear headpipe to keep the engine running cooler •Available with Quad Chrome finish or Sinister black ceramic coating •13/4” headers with 21/4” full-coverage heat shields •Burly 4” mufflers with removable 2” baffles and chrome end caps •Optional high-performance baffles available separately •Includes all mounting hardware •Made in the U.S.A. PART # FOR 12-13 FXS/FLS/FLST 1800-1456 1800-1454 FOR 95-11 FXS/FXST/FLST 1800-10661 1

DESCRIPTION

FUEL/AIR SYSTEMS ENGINE

SUG. RETAIL

Chrome Black

$899.95 899.95

Black

899.95

1800-1066 PART # DESCRIPTION OPTIONAL BAFFLES 1861-0552 21/2” i.d. (ea.)

TRANSMISSION & DRIVELINE

SUG. RETAIL $138.95

1861-0552

95-06 models will require O2 sensor port plugs; sold separately.

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES 1800-1348 1800-1352

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

1800-1353 Right side

TRUE DUAL CROSSUNDER EXHAUST SYSTEMS FOR DRESSERS •True Dual 13/4” crossunder headers with 21/4” full-coverage heat shields •Designed to produce 20% or more horsepower and torque with a full, rich sound •Quad Chrome finish delivers optimal adhesion and corrosion protection •Backlash mufflers have removable baffles; Longtails have non-removable baffles •Made in the U.S.A. PART # DESCRIPTION FOR 10-13 FLHT, FLTR, FLHR, FLHX 1800-1348 True Duals w/ 33” Longtail mufflers

SUG. RETAIL

$899.95

PART # DESCRIPTION SUG. RETAIL FOR 10-13 FLHT, FLTR, FLHR, FLHX (CONT) 1800-1352 True Duals w/ 28” Backlash mufflers $799.95

FOOTRESTS & LICENSE PLATE FRAMES 1800-1353 Left side

PART # DESCRIPTION SUG. RETAIL FOR 10-13 FLHT, FLTR, FLHR, FLHX (CONT) 1800-1353 True Duals w/ 32” Backlash mufflers $799.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

431


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

1800-1541

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1800-1542

1800-1540

TRUE DUAL CROSSOVER SYSTEMS WITH REMOVABLE LONGTAIL TIPS FOR DRESSERS •True Dual crossover systems with 13/4” headpipes and 21/4” full-coverage heat shields •Show-quality Quad Chrome finish •21/4” dia. mufflers feature 13/4” x 10” removable baffles and removable Longtail tips •Designed to deliver 20% or more horsepower and torque gains •Systems include O2 sensor ports that accept OEM or aftermarket O2 sensors •Made in the U.S.A. PART # DESCRIPTION FOR 10-13 FLHT, FLTR, FLHR, FLHX 1800-1540 W/ 33” mufflers 1800-1541 W/ 36” mufflers

SUG. RETAIL $899.95 899.95

1800-1543

PART # DESCRIPTION FOR 10-13 FLHT, FLTR, FLHR, FLHX (CONT) 1800-1542 W/ 39” mufflers 1800-1543 W/ 42” mufflers

SUG. RETAIL $899.95 899.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

1800-1537

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

432

1800-1538

1800-1536

TRUE DUAL CROSSUNDER SYSTEMS WITH REMOVABLE LONGTAIL TIPS FOR DRESSERS •True Dual crossunder systems with 13/4” headpipes and 21/4” full-coverage heat shields •Show-quality Quad Chrome finish •21/4” dia. mufflers feature 13/4” x 10” removable baffles and removable Longtail tips •Designed to deliver 20% or more horsepower and torque gains •Systems include O2 sensor ports that accept OEM or aftermarket O2 sensors •Made in the U.S.A. PART # DESCRIPTION FOR 10-13 FLHT, FLTR, FLHR, FLHX 1800-1536 W/ 33” mufflers 1800-1537 W/ 36” mufflers

SUG. RETAIL $899.95 899.95

1800-1539

PART # DESCRIPTION FOR 10-13 FLHT, FLTR, FLHR, FLHX (CONT) 1800-1538 W/ 39” mufflers 1800-1539 W/ 42” mufflers

SUG. RETAIL $899.95 899.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION 1800-1262

LUGGAGE 1800-1260

SEATS & SISSY BARS EXHAUST 1800-1261

FUEL/AIR SYSTEMS 1800-1259

ENGINE TRANSMISSION & DRIVELINE 1800-1532

GASKETS & SEALS

1800-1266

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1800-1534

1800-1533

CABLES

BRAKES TANKS & OIL FILTERS

1800-1535

TRUE DUAL CROSSOVER SYSTEMS FOR DRESSERS •True Dual 13/4” crossover headers with full-coverage heat shields •Designed to produce up to 20% more horsepower, huge torque and a powerful sound •Show-quality Quad Chrome finish delivers optimal adhesion and corrosion protection •Mufflers are available with or without integrated, non-removable baffles •Made in the U.S.A. SUG. PART # DESCRIPTION FOR 10-13 FLHT, FLTR, FLHR, FLHX 1800-12601, 2 True Duals w/ 33” x 17/8” Longtail slip-ons w/o baffles 1800-12621 True Duals w/ 33” x 21/4” Longtail mufflers w/ baffles (dia.) 1800-12671 True Duals w/ 33” x 21/4” Longtail slip-ons w/o baffles 1 1800-1259 True Duals w/ 33” x 4” Longtail mufflers w/ baffles 1800-12611, 2 True Duals w/ 36” x 17/8” Straight Longtail slip-ons w/o baffles 1800-12651 True Duals w/ 36” x 21/4” Mini Cholo Longtail slip-ons w/o baffles 1800-12661 True Duals w/ 36” x 21/4” Mini Cholo Longtail mufflers w/ baffles

RETAIL $899.95 899.95 899.95 899.95 899.95 899.95

1800-0393

PART # DESCRIPTION FOR 07-08 FLHT, FLTR, FLHR, FLHX 1800-1532 True Duals w/ 33” x 13/4” Longtail mufflers w/ baffles 1800-1533 True Duals w/ 36” x 13/4” Longtail mufflers w/ baffles 1800-1534 True Duals w/ 39” x 13/4” Longtail mufflers w/ baffles 1800-1535 True Duals w/ 42” x 13/4” Longtail mufflers w/ baffles FOR 95-06 FLHT, FLTR, FLHR, FLHX 1800-1188 True Duals w/ 33” x 4” Longtail mufflers w/ baffles 1800-0393 True Duals w/ 39” x 21/4”Cholo Longtails mufflers w/ baffles 1 2

899.95

DASHES & GAUGES

SUG. RETAIL $899.95 899.95 899.95 899.95 899.95 899.95

FLHX and FLTRX models require custom spacing for left passenger footpeg. Optional baffle: PART #DS-202154.

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

433


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE

1800-1430 1800-1423 1800-1426

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1800-1425

1800-1457

1800-1464

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1800-1433

1800-1037 1800-0691

LEGEND SERIES EXHAUST SYSTEMS

•Legendary style and function that could only come from Samson •Boost horsepower and torque by up to 20% while also improving fuel efficiency •Stepped headpipes run from 13/4” to 21/4” improving the exhaust flow •Available with either show-quality Quad Chrome finish or Sinister hightemp black ceramic coating; Sinister black retains heat inside the pipe to maximize power while the outer surface remains cooler than chrome pipes •21/2” full coverage heat shields •Removable baffles ensure tuning requirements of today’s fuel-injected motors while emitting a deep, guttural tone •O2 sensor ports accept OEM and aftermarket sensors •Made in the U.S.A.

1800-1034

NOTE: 86-06 FXST, FLST and 04-06 XL applications will require the separate purchase of O2 sensor port plugs; see page 476.

1800-0814

FOR 12-13 FXS/FLS/FLST MODELS

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

434

SUG. PART # DESCRIPTION RETAIL QUAD CHROME 1800-1423 Pomonas $699.95 1800-1424 Street Sweepers 699.95 1800-1426 Hellraisers 699.95 1800-1428 Sidewinders 699.95 1800-1430 Slashers 699.95 1800-1432 Rip Saws 699.95 FOR 86-11 FXS, FXST, FLST MODELS SUG. PART # DESCRIPTION RETAIL QUAD CHROME 1800-0683 Cannons $699.95 1800-0684 Boloney Cut 699.95 1800-0685 Pomona Pipes 699.95 1800-0686 Street Sweepers 699.95 1800-0687 Slashers 699.95 1800-0688 Rip Saws 699.95

PART # DESCRIPTION QUAD CHROME (CONT) 1800-1457 Cannons 1800-1459 Shortys 1800-1461 Longhorns 1800-1462 Renegades 1800-1464 Boloney Cut

PART # DESCRIPTION QUAD CHROME (CONT) 1800-0689 Sidewinders 1800-0691 Longhorns 1800-0692 Renegades 1800-0818 Shortys 1800-1177 Hell Raisers

SUG. RETAIL $699.95 535.00 749.95 749.95 699.95

SUG. RETAIL $699.95 749.95 749.95 499.95 699.95

FOR 12-13 FLD MODELS SUG. RETAIL

PART # DESCRIPTION QUAD CHROME 1800-1520 Cannons $699.95 1800-1522 Shortys 499.95 1800-1524 Boloney Cut 699.95 1800-1526 Street Sweepers 699.95 1800-1528 Slashers 699.95 1800-1530 Rip Saws 699.95

SUG. RETAIL

PART # DESCRIPTION SINISTER BLACK 1800-1521 Cannons $699.95 1800-1523 Shortys 499.95 1800-1525 Boloney Cut 699.95 1800-1527 Street Sweepers 699.95 1800-1529 Slashers 699.95 1800-1531 Rip Saws 699.95

SUG. PART # DESCRIPTION RETAIL SINISTER BLACK 1800-1425 Street Sweepers $699.95 1800-1427 Hellraisers 699.95 1800-1429 Sidewinders 699.95 1800-1431 Slashers 699.95 1800-1433 Rip Saws 699.95

SUG. PART # DESCRIPTION RETAIL SINISTER BLACK 1800-1032 Cannons $699.95 1800-1035 Boloney Cut 699.95 1800-1036 Pomona Pipes 699.95 1800-0815 Street Sweepers 699.95 1800-0816 Slashers 699.95

PART # DESCRIPTION SINISTER BLACK (CONT) 1800-1458 Cannons 1800-1460 Shortys 1800-1463 Renegades 1800-1465 Boloney Cut

PART # DESCRIPTION SINISTER BLACK (CONT) 1800-0817 Rip Saws 1800-1037 Sidewinders 1800-1034 Renegades 1800-0814 Shortys 1800-1178 Hell Raisers

SUG. RETAIL $699.95 535.00 749.95 699.95

SUG. RETAIL $699.95 699.95 749.95 499.95 699.95

FOR 12-13 FXDB/FXDC/FXDWG/FXDF MODELS SUG. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL QUAD CHROME SINISTER BLACK 1800-1438 Cannons $699.95 1800-1439 Cannons $699.95 1800-1442 Street Sweepers 699.95 1800-1440 Shortys 499.95 1800-1444 Hellraisers 699.95 1800-1441 Boloney Cut 699.95 1800-1446 Slashers 699.95 1800-1443 Street Sweepers 699.95 1800-1447 Rip Saws 699.95 1800-1445 Hellraisers 699.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS

LEGEND SERIES EXHAUST SYSTEMS (CONT)

TOURING AUDIO & COMMUNICATION LUGGAGE 1800-0682 1800-0677

SEATS & SISSY BARS

1800-0681

EXHAUST FUEL/AIR SYSTEMS 1800-1180

1800-1029

ENGINE

1800-1026

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1800-1552

1800-1544

LIGHTING

1800-1548

HANDLEBARS, CONTROLS & MIRRORS CABLES 1800-1331

1800-1547

BRAKES

1800-1551 FOR 06-11 FXD, 06-08 FXDWG WITH FORWARD OR MID CONTROLS SUG. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL QUAD CHROME SINISTER BLACK 1800-0677 Cannons $699.95 1800-1025 Cannon $699.95 1800-0680 Street Sweepers 699.95 1800-1027 Boloney Cut 699.95 1800-0681 Slashers 699.95 1800-1029 Street Sweepers 699.95 1800-0682 Rip Saws 699.95 1800-1031 Rip Saws 699.95 1800-1179 Hell Raisers 699.95 1800-1026 Shortys 499.95 1800-1180 Hell Raisers 699.95

FOR 10-13 FLHT, FLHX, FLHR, FLTR SUG. PART # DESCRIPTION RETAIL QUAD CHROME 1800-1263 Cannons $699.95 1800-1544 Boloney Cut 699.95 1800-1546 Street Sweepers 699.95 1800-1548 Hell Raisers 699.95 1800-1550 Slashers 699.95 1800-1552 Rip Saws 699.95

FOR 09 FLHT, FLHX, FLTR, FLHR

FOR ALL 04-13 XL MODELS

PART # QUAD CHROME 1800-1138

DESCRIPTION Cannons

SUG. RETAIL $699.95

FOR 95-08 FLHT, FLHX, FLTR, FLHR PART # QUAD CHROME 1800-1189 SINISTER BLACK 1800-1190

DESCRIPTION

SUG. RETAIL

Cannons

$699.95

Cannons

699.95

SUG. RETAIL

PART # DESCRIPTION QUAD CHROME 1800-1330 Boloney Cut $599.95 1800-1331 Pomona Pipes 599.95 1800-1332 Street Sweepers 599.95 1800-1333 Hell Raisers 599.95

SUG. RETAIL

PART # DESCRIPTION SINISTER BLACK 1800-1264 Cannons $699.95 1800-1545 Boloney Cut 699.95 1800-1547 Street Sweepers 699.95 1800-1549 Hell Raisers 699.95 1800-1551 Slashers 699.95 1800-1553 Rip Saws 699.95

SUG. RETAIL

PART # DESCRIPTION SINISTER BLACK 1800-1334 Boloney Cut $599.95 1800-1335 Pomona Pipes 599.95 1800-1336 Street Sweepers 599.95 1800-1337 Hell Raisers 599.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

435


SECTION

6

WINDSHIELDS & FAIRINGS 1802-0128

TOURING AUDIO & COMMUNICATION

1802-0127

LUGGAGE

1802-0202

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

1802-0104 1800-0187

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL 1800-0530

LIGHTING DS-202004

DS-202013

DS-202160

DS-202163

DS-202162

DS-202208

DS-202248

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

TRUE DUAL CROSSOVER AND CROSSUNDER HEADER PIPES •High-performance “True Dual” header systems with Quad Chrome finish or Sinister black ceramic coating DS-202164 •Allows exhaust gases to flow more efficiently, reduces heat on the right side and improves airflow cooling the rear cylinder •09-13 systems feature 21/4” full-coverage, 220° heat shields on both pipes; L85-08 systems feature 2” full-coverage heat shields •Heli-arc welded for strength •All required mounting brackets and clamps supplied •Headers will accept Silver Bullet™ mufflers or any 95-13 OEM-style muffler •Mufflers must be purchased separately •Made in the U.S.A.

DS-202167

DS-202179

DS-202154

TRUE DUAL HEADER PIPES ONLY PART # DESCRIPTION FOR 10-13 FLHT, FLTR, FLHR, FLHX 1802-0127 Crossover, chrome 1802-0128 Crossover, black 1802-0202 Crossunder, chrome FOR 09 FLHT, FLTR, FLHR, FLHX 1802-0104 Crossover, chrome

SUG. RETAIL $499.95 499.95 499.95

PART # DESCRIPTION FOR 07-08 FLHT, FLTR, FLHR, FLHX 1800-05301 Crossover, chrome FOR L85-06 FLT, FLHT, FLHX, FLHR, FLTR 1 1800-0187 Crossover, chrome 1

499.95

SUG. RETAIL $499.95 499.95

2” heat shields.

3” SILVER BULLET™ MUFFLERS

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

436

PART # DS-202004 DS-202013 DS-202160 DS-202162 DS-202163 DS-202208

DESCRIPTION 29” Slasher mufflers 29” Slant-cut mufflers 33” Fishtail mufflers 30” Tapered mufflers 30” Turnout mufflers 30” Turndown mufflers

SUG. RETAIL $499.95 499.95 529.95 529.95 529.95 529.95

PART # DS-202248 DS-202164 DS-202167 DS-202179 DS-202154

DESCRIPTION SUG. RETAIL 29” Megaphone mufflers $499.95 29” Slash-cut mufflers 529.95 7 33” Straight-pipe fishtails (1 /8”) (no baffles) 349.95 30” Slip-on drag pipes (17/8”) (use baffle DS-202154) 299.95 11/2” x 10” baffle for 17/8” pipe (ea.) 39.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS DS-202301

DS-202273

DS-202308

TOURING AUDIO & COMMUNICATION

DS-202301

LUGGAGE

ROLLED THUNDER™ MUFFLERS •Rolled edge mufflers give a refined, finished appearance to your Dresser •Power Chamber design with free-flowing, nonremovable baffles •Overall length is 28” •Made in the U.S.A.; sold in pairs

PART # DESCRIPTION FOR ALL 95-13 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE DS-202301 Oval DS-202273 Oval slant-cut DS-202308 Straight-cut

SUG. RETAIL $499.95 499.95 499.95

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

DS-202160 DS-202162 1801-0103

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

DS-202208

DS-202248

DS-202163

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES DS-202164

DS-202167

1801-0468

TANKS & OIL FILTERS 3” SILVER BULLET™ MUFFLERS FOR DRESSERS

DASHES & GAUGES

•3” diameter one-piece mufflers feature Power Chamber design with free-flowing, nonremovable baffles with PowerBar technology and high-quality chrome plating •Bolt to the stock locations with supplied hardware 1801-0466 •Sold in pairs •Made in the U.S.A.

FRAMES, SUSPENSION & FENDERS 1801-0467

DS-202179 DS-202154

PART # DESCRIPTION FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE 1801-0103 32” Longtail mufflers DS-202160 33” Fishtail mufflers DS-202162 30” Tapered mufflers DS-202163 30” Turnout mufflers DS-202208 30” Turndown mufflers DS-202248 29” Megaphone mufflers DS-202164 29” Slash-cut mufflers

SUG. RETAIL $599.95 529.95 529.95 529.95 529.95 499.95 529.95

PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE (CONT) 1801-0468 33” x 21/4”Longtail slip-ons (no baffles) $399.95 DS-202167 33” x 17/8” Fishtail slip-ons (no baffles) 349.95 7 1 1801-0466 33” x 1 /8” Longtail slip-ons (no baffles) 399.95 7 1 1801-0467 36” x 1 /8” Longtail slip-ons (no baffles) 399.95 DS-2021791 30” x 17/8” Drag pipe slip-ons 299.95 DS-202154 11/2” x 10” baffle (ea.) 39.95 1

Use baffle DS-202154.

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

437


SECTION

6

WINDSHIELDS & FAIRINGS TOURING 1801-0539

1801-0540

AUDIO & COMMUNICATION

1801-0203

1801-0537

LUGGAGE SEATS & SISSY BARS EXHAUST 1801-0348

FUEL/AIR SYSTEMS

1801-0541

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS

1801-0372

4” SILVER BULLET™ MUFFLERS FOR DRESSERS •Increase horsepower and torque while improving gas mileage •High-quality construction with Samson’s Quad Chrome or Sinister black ceramic finish; tapered mufflers feature chrome end caps •Removable baffles allow customization of sound and performance (noted mufflers include Decibel Killer baffles) •Mounting hardware included •Sold in pairs •Optional Varitech (high-performance) and Decibel Killer (reduced sound emission) baffles available separately •Made in the U.S.A. PART # DESCRIPTION FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR 1801-0203 Chrome 30” mufflers w/ 1801-0537 Chrome 30” mufflers w/ (Decibel Killer baffles) 1801-0540 Chrome 35” mufflers w/ 1801-0539 Chrome 35” mufflers w/ (Decibel Killer baffles) 1 1801-0372 Chrome 34” Longtails

1801-0538 1861-0552

1861-0563

SUG. RETAIL chrome tips chrome tips chrome tips chrome tips

$599.95 599.95 599.95 599.95 599.95

PART # DESCRIPTION FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR (CONT) 1801-0541 Chrome 32” Slash-cut mufflers 1801-0348 Black 30” mufflers w/ chrome tips 1801-0538 Black 30” mufflers w/ chrome tips (Decibel Killer baffles) OPTIONAL BAFFLES 1861-0552 Varitech 21/2” i.d. (ea.) 1861-0563 Decibel Killers (ea.) 1

DASHES & GAUGES

SUG. RETAIL $399.95 599.95 599.95 138.95 149.95

Will not accept Varitech baffles.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

438

3” SILVER BULLET™ MUFFLERS FOR SPRINGER SOFTAIL •3” fishtail mufflers with baffles •Mount to OEM bracket •Sold in pairs PART # DESCRIPTION FOR 97-03 FLSTS AND 05-07 FLSTSC DS-202199 291/4” Fishtail mufflers w/ baffle

SUG. RETAIL $499.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

1800-0243 1800-1125

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

1800-0244 1800-1126

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1800-0246

1800-0245

13/4” AND 2” “M” PIPES FOR DYNA GLIDE

CABLES

BRAKES

•Chrome-plated single-piece design •All pipes have 21/2” muffler bodies and come with baffles •13/4” pipes accept OEM heat shields; 2” pipes include heat shield •O2 sensor bung plugs included for non-sensor applications •Made in the U.S.A.

TANKS & OIL FILTERS

NOTE: Mounts to OEM bracket on 95-11 models. 91-94 models must use mounting bracket PART #DS-209936 or 1860-0391. PART # DESCRIPTION FOR 91-11 DYNA GLIDE (EXCEPT 08-11 FXDF, 10-11 FXDWG) 1800-0243 Tapered, 13/4” 1800-1125 Tapered, 2” 1800-0244 Slash-out, 13/4”

SUG. RETAIL $275.95 457.95 275.95

PART # DESCRIPTION SUG. RETAIL FOR 91-11 DYNA GLIDE (EXCEPT 08-11 FXDF, 10-11 FXDWG) (CONT) 1800-1126 Slash-out, 2” $457.95 1800-0245 Slash-down, 13/4” 275.95 1800-0246 Turnout, 13/4” 303.95

2” “M” PIPES FOR FLT •Traditional-style chrome staggered pipes feature 21/2” muffler bodies with all-steel muffler cores and heat shields •Rear pipe is a slip-fit that attaches to the OEM hanger bracket under the saddlebag •One-piece front pipe includes mounting hardware •Feature a stepped header design for increased performance when used on big-inch motors •O2 sensor bung plugs included for non-sensor applications •Made in the U.S.A. PART # DESCRIPTION FOR 85-09 FLHT/FLHX/FLHR/FLTR MODELS 1800-0618 Slash-out, 2”

SUG. RETAIL $454.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

439


SECTION

6

WINDSHIELDS & FAIRINGS TOURING SHOTGUN-STYLE “M” PIPES FOR FXST/FLST

AUDIO & COMMUNICATION

•Highly-chromed finish •All pipes have 21/2” muffler bodies and come with baffles •Accept OEM heat shields unless noted •Made in the U.S.A.

LUGGAGE

PART # DESCRIPTION FOR 90-06 FLSTF, FXSTD AND 93-96 FLSTN 1800-0068 Slash-out, 13/4”

SUG. RETAIL $275.95

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

PHD-123-T

PHD-123-SS

13/4” AND 2” “M” PIPES FOR FXR •One-piece design with top-quality chrome finish •All pipes have 21/2” muffler bodies and come with baffles •2” pipes feature a stepped header design for increased performance when used on big-inch motors •Mount to the OEM bracket and must be used with factory clamps or PART #DS-209970 •Made in the U.S.A. PART # DESCRIPTION FOR 84-94, 99-00 FXR MODELS PHD-123-T Tapered, 13/4” PHD-123-SS Slash-out, 13/4”

SUG. RETAIL $252.95 252.95

PART # DESCRIPTION FOR 84-94, 99-00 FXR MODELS (CONT) PHD-223-SS Slash-out, 2” DS-203083 Heat shields for 84-94, 99-00 13/4” “M” pipes

SUG. RETAIL $287.95 67.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

1800-0593 1800-0594

1800-0595

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

440

1800-0597

1800-0598

1800-0596

13/4” AND 2” “M” PIPES FOR FXST/FLST •Traditional-style, highly-chromed muffler pipes are crafted from one continuous piece of 16-gauge tubing •All pipes have 21/2” muffler bodies and include baffles •2” pipes feature a stepped header design for increased performance when used on big-inch motors •13/4” pipes accept OEM or Cycle Shack heat shields and 2” pipes accept Cycle Shack heat shields only •All necessary gaskets and mounting bracket included •Made in the U.S.A. FOR 07-11 FXST/B/C, FLSTC MODELS PART # DESCRIPTION 1800-0593 Tapered, 13/4” 1800-0597 Tapered, 2”

SUG. RETAIL $326.95 356.95

PART # 1800-0594 1800-0598

DESCRIPTION Slash-out, 13/4” Slash-out, 2”

SUG. RETAIL $326.95 356.95

PART # 1800-0595 1800-0596

DESCRIPTION Slash-down, 13/4” Turn-out, 13/4”

SUG. RETAIL $326.95 356.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS

13/4” AND 2” “M” PIPES FOR FXST/FLST (CONT)

TOURING 1800-0060

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1800-0059 PART # DESCRIPTION FOR 00-06 FXST/C/S/B, FLST/C (INCLUDES MOUNT BRACKET) 1800-0059 Slash-out, 13/4” 1800-0060 Tapered, 13/4” 1800-0062 Slash-out, 2”

ENGINE

SUG. RETAIL $316.95 316.95 353.95

1800-0062

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES PHD-114-TA FOR 84-99 FXST; 86-99 FLST EXCEPT FLSTS; 85 FXE AND FXSB; AND 85-86 FXWG PART # DESCRIPTION SUG. RETAIL PHD-114-TA Tapered, 13/4” $252.95 3 PHD-114-SSA Slash-out, 1 /4” 252.95

PHD-114-SSA (MOUNTS TO OEM BRACKET) PART # PHD-214SSA PHD-114-TOA

BRAKES DESCRIPTION Slash-out, 2” Turnout, 13/4”

SUG. RETAIL $287.95 280.95

TANKS & OIL FILTERS

HEAT SHIELDS FOR CYCLE SHACK SOFTAIL M-PIPES

DASHES & GAUGES

1861-0049 1861-0050

1861-0052 1861-0053

HS-15X

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

HS-14X PART # DESCRIPTION SUG. RETAIL HEAT SHIELDS FOR 13/4” AND 2” M-PIPES HS-14X Front, for 13/4” pipes (23”) $77.95 HS-15X Rear, for 13/4” pipes (231/2”) 79.95

PART # DESCRIPTION SUG. RETAIL HEAT SHIELDS FOR 13/4” AND 2” M-PIPES (CONT) 1861-0049 Front, for 13/4” pipes (14”) $50.95 1861-0050 Rear, for 13/4” pipes (18”) 52.95

PART # DESCRIPTION SUG. RETAIL HEAT SHIELDS FOR 13/4” AND 2” M-PIPES (CONT) 1861-0052 Front, for 2” pipes (23”) $68.95 1861-0053 Rear, for 2” pipes (231/2”) 67.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

441


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

1800-0603

1800-0604

PHD-116-TA

PHD-116-SSA

PHD-116-T0A

PHD-216-TA

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

442

13/4” AND 2” “M” PIPES FOR XL

BP-1

•Chrome one-piece design, with 21/2” muffler bodies •2” pipes have a stepped header design for added performance •13/4” pipes for 04-13 models use OEM heat shields •86-03 models will require separate purchase of heat shields •O2 sensor bung plugs included for 04-06 applications •Made in the U.S.A. PART # FOR ALL 04-13 1800-0603 1800-0604 FOR ALL 86-03 PHD-116-TA PHD-116-SSA PHD-116-TOA PHD-216-TA

DESCRIPTION XL MODELS Tapered, 13/4” Slash-out, 13/4” XL MODELS Tapered, 13/4” Slash-out, 13/4” Turnout, 13/4” Tapered, 2”

SUG. RETAIL $294.95 294.95 252.95 252.95 280.95 287.95

PART # DESCRIPTION SUG. RETAIL BRAKE STOP AND HEAT SHIELDS FOR 86-03 MODELS BP-1 Brake stop (86-87 only) $6.95 HS-16 Front heat shield for 13/4” pipes 59.95 HS-17 Rear heat shield for 13/4” pipes 59.95 HS-216 Front heat shield for 2” pipes 66.95 HS-217 Rear heat shield for 2” pipes 66.95

HS-17

HS-16

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1800-0600

1800-0602

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS 1800-0063

1800-0065

PHD-101-A

ELECTRICAL

LIGHTING HS-15X

HANDLEBARS, CONTROLS & MIRRORS

HS-14X

CABLES 1861-0049 1861-0050

BRAKES PHD-101SA

TANKS & OIL FILTERS

13/4” AND 2” DRAG PIPES FOR FXCW/FXST/FLST •High-quality chrome finish •2” pipes feature a stepped header design for increased performance when used on big-inch motors •Come with mounting bracket unless noted •13/4” pipes accept OEM or Cycle Shack heat shields (unless noted); 2” pipes accept Cycle Shack heat shields only •Optional baffles sold separately •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 07-11 FXST/B/C AND FLSTC 1800-0600 Slash-out, 13/4” $280.95 1800-0602 Slash-out, 2” 307.95 FOR 00-06 FXST/C/S/B/D AND FLST/C 1800-0063 Slash-out, 13/4” 264.95 1800-0065 Slash-out, 2” 252.95 FOR 84-99 SOFTAIL (EXCEPT FLSTS), 85 FXE, FXSB AND 85-86 FXWG (MOUNT TO OEM BRACKET) PHD-101-A1 Slash-out , 13/4” 190.95 PHD-101SA1 Straight-cut , 13/4” 190.95 1 PHD-201-A Slash-out , 2” 220.95

DASHES & GAUGES

1861-0053 1861-0052

PART # DESCRIPTION SILENCER INSERTS / HEAT SHIELDS 1524 Silencer insert, 13/4” (EA.) 1526 Silencer insert, 2” (EA.) HS-14X Front heat shield, 13/4” pipes (23”) HS-15X Rear heat shield, 13/4” pipes (231/2”) 1861-0049 Front heat shield, 13/4” pipes (14”) 1861-0050 Rear heat shield, 13/4” pipes (18”) 1861-0052 Front heat shield, 2” pipes (23”) 1861-0053 Rear heat shield, 2” pipes (231/2”) 1

SUG. RETAIL $16.95 16.95 77.95 79.95 50.95 52.95 68.95 67.95

Pipes will fit FLSTF and 93-96 FLSTN models if muffler bracket PART #s DS-209930, DS-209931 or OEM #65459-84A is purchased.

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

443


SECTION

6

WINDSHIELDS & FAIRINGS TOURING 13/4” SHOTGUN DRAG PIPES FOR FXST/FLST

AUDIO & COMMUNICATION

•One-piece design with a chrome finish •Accept OEM heat shields •Optional baffles sold separately •Made in the U.S.A.

LUGGAGE

PART # DESCRIPTION SUG. RETAIL FOR 90-06 FLSTF, 93-96 FLSTN AND 00-06 FXSTD 1800-0066 Slash-out, 13/4” $211.95 1524 Silencer insert, 13/4” (ea.) 16.95

1800-0066

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE PHD-101-GA

TRANSMISSION & DRIVELINE

13/4” AND 2” SHOTGUN DRAG PIPES FOR FXST/FLST

GASKETS & SEALS

•Chrome shotgun pipes measure 40” long •2” pipes feature a stepped header design for increased flow when used on big-inch motors •Front pipe mounts to OEM bracket •Heat shields and baffles sold separately •Made in the U.S.A.

ELECTRICAL

NOTE: Will not work with saddlebags.

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

PHD-201-GA

FOR 84-99 FXST; 86-99 FLST (EXCEPT FLSTF, FLSTN AND FLSTS) PART # DESCRIPTION PHD-101-GA Slash-out, 13/4” PHD-201-GA Slash-out, 2” HS-14X Front heat shield, 13/4” (23”) 1861-0049 Front heat shield, 13/4” (14”)

SUG. RETAIL $190.95 220.95 77.95 50.95

1861-0049

PART # 1861-0047 1524 1526

1861-0047

DESCRIPTION Rear heat shield, 13/4” Silencer insert, 13/4” (ea.) Silencer insert, 2” (ea.)

SUG. RETAIL $56.95 16.95 16.95

CABLES

BRAKES 1800-1124

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

444

1800-0247

13/4” AND 2” DRAG PIPES FOR DYNA GLIDE •Chrome one-piece design •Specifically designed to mount easily onto Dyna Glide models •2” pipes feature a stepped header design for increased performance when used on big-inch motors •13/4” pipes accept OEM heat shields; 2” pipes include heat shields •Include O2 sensor bung plugs for non-sensor applications •Silencer inserts sold separately •Made in the U.S.A. NOTE: Mounts to OEM bracket on 95-11 models. 91-94 models must use mount bracket 1860-0391 or DS-209936.

1800-1128 PART # DESCRIPTION FOR 91-11 DYNA GLIDE (EXCEPT 10-11 FXDWG, 08-11 FXDF) 1800-0247 Slash-out, 13/4” 1800-1124 Slash-out, 2” 1800-1128 Straight-cut, 13/4” 1524 Silencer insert for PART #PHD-149C, 13/4” (ea.) 1526 Silencer insert for PART #PHD-249, 2” (ea.)

SUG. RETAIL $220.95 385.95 220.95 16.95 16.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING 13/4” AND 2” DRAG PIPES FOR FLT

AUDIO & COMMUNICATION

•Straight-through chrome pipe set includes channel mounts and hardware for mounting to factory brackets •Pipes measure 40” •Include O2 sensors and plugs for non-sensor applications •2” pipes include heat shields •Optional baffles sold separately •Made in the U.S.A.

LUGGAGE 1800-0673

PART # DESCRIPTION FOR 85-13 FLT/FLHT/FLHX/FLHS/FLHR AND FLTR MODELS 1800-0673 Slash-out, 13/4” 1800-0674 Slash-out, 2”

SUG. RETAIL $275.95 376.95

1800-0674

SEATS & SISSY BARS

PART # DESCRIPTION SUG. RETAIL FOR 85-13 FLT/FLHT/FLHX/FLHS/FLHR AND FLTR MODELS (CONT) 3 1524 Silencer insert, 1 /4”, (ea.) $16.95 1526 Silencer insert, 2”, (ea.) 16.95

13/4” AND 2” DRAG PIPES FOR FXR

FUEL/AIR SYSTEMS

•Chrome channel-mount pipes attach to factory hanger bracket •OEM midway clamps, or PART #DS-209970, must also be used •2” pipes have a stepped header design •Made in the U.S.A. PART # DESCRIPTION FOR 84-94, 99-00 FXR PHD-100 Slash-out, 13/4” PHD-200 Slash-out, 2” SILENCER INSERTS/HEATSHIELDS 1524 Silencer insert, 13/4” (ea.) 1526 Silencer insert, 2” (ea.) DS-203083 Heat shields for PHD-100 (pr.)

EXHAUST

ENGINE

SUG. RETAIL $190.95 220.95

TRANSMISSION & DRIVELINE

16.95 16.95 67.95

PHD-100

GASKETS & SEALS ELECTRICAL

LIGHTING 1800-1235

HANDLEBARS, CONTROLS & MIRRORS

PHD-102-A

CABLES

BRAKES PHD-102-SA

13/4” AND 2” DRAG PIPES FOR XL •40” chrome pipes mount to OEM mounting bracket •2” pipes feature a stepped header design for increased performance when used on big-inch motors •Fit all models including 883C and 1200C •86-87 XL models require brake stop BP-1 (must be ordered separately) •04-13 models use OEM heat shields on 13/4” pipes; 2” pipes include heat shields •04-13 pipes include O2 sensor bung plugs for 04-06 applications •Heat shields for other models and baffles for all models are available separately •Made in the U.S.A. PART # DESCRIPTION FOR 04-13 XL MODELS 1800-0610 Slash-out, 13/4” 1800-0612 Slash-out, 2” 1800-0611 Slash-down, 13/4” 1800-1235 Straight-cut, 13/4” FOR 86-03 XL MODELS PHD-102-A Slash-out, 13/4” PHD-102-SA Straight-cut, 13/4” PHD-202-A Slash-out, 2”

SUG. RETAIL $238.95 404.95 238.95 238.95 190.95 190.95 220.95

TANKS & OIL FILTERS

PHD-202-A HS-16

HS-17

DASHES & GAUGES

HS-217

PART # DESCRIPTION BAFFLES AND HEAT SHIELDS 1524 Silencer insert 13/4”, (ea.) 1526 Silencer insert 2”, (ea.) BP-1 Brake stop, 86-87 HS-16 Front heat shield for 13/4” pipes, 86-03 HS-17 Rear heat shield for 13/4” pipes, 86-03 HS-216 Front heat shield for 2” pipes, 86-03 HS-217 Rear heat shield for 2” pipes, 86-03

HS-216 SUG. RETAIL $16.95 16.95 6.95 59.95 59.95 66.95 66.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

445


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE 1802-0123

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

1801-0123 w/ 1801-0440 mufflers

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES 1801-0124 w/ 1801-0445 mufflers

BRAKES 1801-0442

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

446

13/4” AND 2” STEPPED HEADER SYSTEMS AND MUFFLERS WITH CATALYSTS •Increase flow and performance •Headers include O2 bungs for both 12mm and 18mm sensors •Heat shields and mounting hardware included •Mufflers feature internal catalysts; sold in pairs •2” headers must be used with performance mufflers listed; will not accept other mufflers •Headpipes and mufflers are sold separately •Made in the U.S.A. FOR 09-13 FLHT/FLHR/FLHX/FLTR MODELS PART # DESCRIPTION HEADRER SYSTEM 1802-0123 13/4” 1802-0124 2” PART # DESCRIPTION 31/2” MUFFLERS FOR 13/4” HEADER SYSTEM 1801-0440 Slash-down 1801-0441 Slash-out 1801-0442 Straight-cut Bazooka Tube™ 1801-0443 Slash-up

1801-0443 SUG. RETAIL $516.95 523.95 SUG. RETAIL $656.95 656.95 656.95 656.95

PART # DESCRIPTION 31/2” MUFFLERS FOR 2” HEADER SYSTEM 1801-0444 Slash-down 1801-0445 Slash-out 1801-0446 Straight-cut Bazooka Tube™ 1801-0447 Slash-up

SUG. RETAIL $675.95 675.95 675.95 675.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS 2-1-2 HEADER

TOURING

•Replacement non-catalyst header for 09-13 Dresser models with 2-1-2 OEM-style catalyst header and dual mufflers •Chrome-plated, mild-steel construction •Increases exhaust flow and provides less heat to riders leg •Reuses OEM heat shields and cross-under pipe •Includes both large (18mm) and small (12mm) O2 bungs •Made in the U.S.A. PART # 1802-0219

DESCRIPTION For 09-13 FLHT/FLHR/FLTR/FLHX models

AUDIO & COMMUNICATION LUGGAGE

SUG. RETAIL $399.95

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

HEADPIPES FOR TOURING MODELS 13/4”

•Feature individual chrome header pipes that eliminate the Y-pipe off the rear cylinder •Increase the exhaust flow for better performance •Include heat shields, brackets, clamps and hardware •Accept any 95-13 OEM-style mufflers (sold separately) •Made in the U.S.A. PART # 1802-0013

TRANSMISSION & DRIVELINE

DESCRIPTION 95-06 FLT/FLHT/FLHX/FLTR and FLHR models

SUG. RETAIL $528.95

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1801-0302

1801-0304

1801-0610

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES 1801-0611

1801-0426

1801-0428

FOOTRESTS & LICENSE PLATE FRAMES

4” MUFFLERS FOR DRESSERS •Chrome finish •Designed for easy installation to OEM brackets •Made in the U.S.A.

1861-0601

PART # DESCRIPTION FOR 95-13 FLT/FLHT/FLHX/FLTR AND FLHR MODELS (PR.) 1801-0302 Slash-down 1801-0304 Straight-cut Bazooka Tube™ 1801-0610 Tapered w/ gloss black end caps 1801-0611 3-ring w/gloss black end caps

SUG. RETAIL $413.95 413.95 634.95 639.95

PART # FOR 10 FLHX/FLTRX 1801-0425 1801-0426 1801-0428 1861-0601

DESCRIPTION (EA.) Slash-down Slash-up Slash-out Optional quiet baffle (ea.)

SUG. RETAIL $229.95 229.95 229.95 29.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FRAMES, SUSPENSION & FENDERS

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

447


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE 1801-0060

1801-0061

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

1801-0062

1801-0063

TRANSMISSION & DRIVELINE GASKETS & SEALS

1801-0608

1801-0609

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1801-0067

1801-0068

CABLES 3” MUFFLERS FOR DRESSERS BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

448

•Available with all-steel performance baffles or baffles with a woven stainless steel sound blanket •Baffles with woven stainless steel sound blanket help prevent hot spots and discoloration – take the “crackle” out of exhaust for a more mellow tone (recommended for fuel-injected models) •Easy installation to OEM brackets •Sold in pairs (unless noted) •Made in the U.S.A. FOR 95-13 FLT/FLHT/FLHX/FLTR/FLHR AND H-D FL TRIKE MODELS PART # DESCRIPTION SUG. RETAIL WITH ALL-STEEL PERFORMANCE BAFFLES 1801-0060 Slash-out $268.95 1801-0061 Slash-down 268.95 1801-0062 Straight-cut Bazooka Tube™ 268.95 1801-0063 Slash-up 268.95 1801-0608 Tapered w/ gloss black end caps 434.95 1801-0609 3-ring w/ gloss black end caps 439.95 BAFFLES WITH WOVEN STAINLESS STEEL SOUND BLANKET 1801-0067 Slash-out 298.95 1801-0068 Slash-down 298.95 1801-0069 Straight-cut Bazooka Tube™ 298.95 1801-0070 Slash-up 298.95 PART # FOR 10 FLHX/FLTRX (EA.) 1801-0429 1861-0602

DESCRIPTION Slash-down Optional quiet baffle

SUG. RETAIL $211.95 29.95

1801-0069

1801-0070

FOR L85-94 FLT/FLHT/FLHS AND FLHR MODELS PART # DESCRIPTION WITH ALL-STEEL PERFORMANCE BAFFLES 1801-0053 Slash-out 1801-0054 Slash-down 1801-0055 Straight-cut Bazooka Tube™

SUG. RETAIL $268.95 268.95 268.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE 1801-0077

SEATS & SISSY BARS

TWO-PIECE TURNOUT MUFFLERS FOR DRESSERS •Top-quality, chrome replacement, 29” long two-piece mufflers •Include steel core baffles •Mounting brackets are welded on, eliminating the need for additional clamps •Sold in pairs •Made in the U.S.A. PART # 1801-0065

DESCRIPTION For 95-13 FLT/FLHT/FLHX/FLTR and FLHR models

SUG. RETAIL $427.95

•Simply installs onto the stock OEM head pipes •Feature great sound with increased performance •Chrome finish •Hardware/ mounting brackets included as needed •Mufflers sold in pairs •Optional chrome heat shields help prevent burns and protect muffler bodies •Front and rear heat shields sold separately •Made in the U.S.A.

EXHAUST

1801-0078

•Chrome mufflers are available in two different styles •All-steel performance baffles •Sold in pairs •Made in the U.S.A.

FUEL/AIR SYSTEMS

PART # DESCRIPTION FOR 97-07 FLSTS/C MODELS 1801-0077 Straight-cut Bazooka Tube™ 1801-0078 Slash-down

4” OVAL MUFFLERS

PART # 1801-0282

CHROME 3” MUFFLERS

SUG. RETAIL $275.95 275.95

1801-0580

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

1801-0581

4” SLIP-ON REPLACEMENT MUFFLER •Muffler features an all-steel core that won’t burn out •Show-quality chrome finish will last for years •Muffler uses stock mounts •Made in the U.S.A.

FITS MODEL For 08-13 FXDF, 10-13 FXDWG

SUG. RETAIL $330.95

PART # FOR 12-13 FLD 1801-0580 1801-0581

DESCRIPTION

Slash-out Slash-down

ELECTRICAL

LIGHTING SUG. RETAIL $199.95 199.95

21/2” SLIP-ON REPLACEMENT MUFFLERS •Mufflers feature all-steel cores that won’t burn out •Show-quality chrome will last for years •Mufflers use stock mounts •Sold in pairs •Made in the U.S.A.

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1801-0210

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

1801-0212

1801-0213

PART # DESCRIPTION FOR 07-13 FXST/B/C, FLSTC, 08-11 FXCW/C 1801-0210 Slash-down 1801-0211 Slash-out 1801-0212 Tapered 1801-0213 Turn-out

SUG. RETAIL $174.95 174.95 174.95 183.95

SLIP-ON REPLACEMENT MUFFLERS continued on next page. We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

449


SECTION

6

WINDSHIELDS & FAIRINGS

SLIP-ON REPLACEMENT MUFFLERS (CONT)

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1801-0012

1801-0014

1801-0013 PART # DESCRIPTION FOR 00-06 FXST/B/C/S, FLST/C (INCLUDES MOUNT BRACKET) 1801-0012 Slash-out 1801-0013 Tapered 1801-0014 Turn-out

SUG. RETAIL $257.95 257.95 264.95

PART # DESCRIPTION FOR 84-99 FX, FXWG, FLST, FXST; 90-94 FLSTF, FLSTN MHD-134T Tapered MHD-134SS Slash-out MHD-134TO Turnout

SUG. RETAIL $172.95 172.95 179.95

ENGINE TRANSMISSION & DRIVELINE 1801-0217

1801-0216

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS

MHD-138-T

MHD-138-SS PART # FOR 07-13 FLSTF, FXSTD 1801-0214 1801-0215 1801-0216 1801-0217

DESCRIPTION Slash-down Slash-out Tapered Turn-out

PART # FOR 95-99 FLSTF, FLSTN MHD-136SS

SUG. RETAIL $174.95 174.95 174.95 183.95

PART # DESCRIPTION FOR 00-06 FLSTF, FXSTD (INCLUDES MOUNT BRACKET) MHD-138-SS Slash-out MHD-138-T Tapered HS-38 Rear heat shield HS-37 Front heat shield

DESCRIPTION

SUG. RETAIL $183.95 183.95 72.95 57.95 SUG. RETAIL

Slash-out

$172.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

450

1801-0043

1801-0041 1801-0042 PART # DESCRIPTION FOR 07-13 FLSTN/I, 08-11 FLSTSB 1801-0218 Slash-down 1801-0219 Slash-out 1801-0220 Tapered 1801-0221 Turn-out

SUG. RETAIL $174.95 174.95 174.95 183.95

PART # FOR 05-06 FLSTN 1801-0041 1801-0042 1801-0043

DESCRIPTION Slash-out Slash-down Turn-out

SUG. RETAIL $174.95 174.95 183.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS

SLIP-ON REPLACEMENT MUFFLERS (CONT)

TOURING AUDIO & COMMUNICATION LUGGAGE MT-129

MS-129

MTO-129

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1801-0286

1801-0284

1801-0287

ENGINE

NOTE: Dyna Glide pipes mount to OEM bracket on 95-13 models; 91-94 models will require mount bracket DS-209936. PART # DESCRIPTION SUG. RETAIL FOR 91-13 DYNA GLIDE MODELS (EXCEPT 12-13 FLD, 08-13 FXDF, 10-13 FXDWG) MT-129 Tapered $172.95 MS-129 Slash-out 172.95 MTO-129 Turnout 181.95 DS-209936 Chrome mount bracket; repl. OEM #65674-95 43.95

PART # DESCRIPTION FOR 08-13 FXDF, 10-13 FXDWG 1801-0286 Tapered 1801-0284 Slash-out 1801-0287 Slash-down

SUG. RETAIL $190.95 190.95 190.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING PART # FOR 87-94 FXR MODELS MS-123

DESCRIPTION

SUG. RETAIL

Slash-out

HANDLEBARS, CONTROLS & MIRRORS

$172.95

CABLES

BRAKES TANKS & OIL FILTERS 1801-0009 PART # DESCRIPTION FOR 04-13 XL MODELS 1801-0009 Slash-Out

SUG. RETAIL $188.95

1801-0010 PART # DESCRIPTION FOR 04-13 XL MODELS (CONT) 1801-0010 Tapered

SUG. RETAIL $188.95

1801-0011 PART # DESCRIPTION FOR 04-13 XL MODELS (CONT) 1801-0011 Turnout

SUG. RETAIL $197.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

MXL-134TA PART # DESCRIPTION FOR 86-03 XL MODELS MXL-134TA Tapered

SUG. RETAIL $172.95

MXL-134SSA PART # DESCRIPTION FOR 86-03 XL MODELS (CONT) MXL-134SSA Slash-out

MXL-134TOA SUG. RETAIL $172.95

PART # DESCRIPTION FOR 86-03 XL MODELS (CONT) MXL-134TOA Turnout

SUG. RETAIL $183.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

451


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

1800‑0922

LUGGAGE SEATS & SISSY BARS

1802‑0056

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

13/4” UPSWEEP DRAG PIPES AND HEADPIPES FOR TWIN CAM SOFTAILS •Drag pipes available in an unbaffled Fishtail style •Includes hanger brackets and heat shields •Headpipes can be used with a variety of universal mufflers and extensions; sold separately •Chrome finish •Made in the U.S.A. NOTE: Additional mounting clamps may be required to mount headpipes. Mounting clamps are sold separately. PART # FOR 00‑06 FXST/FLST 1800‑0922

DESCRIPTION

SUG. RETAIL

Upsweep Fishtail drag pipes

$622.95

PART # DESCRIPTION FOR 00‑06 FXST/FLST (CONT) 1802‑0056 Upsweep headpipes

SUG. RETAIL $485.95

LIGHTING 1800‑0946

HANDLEBARS, CONTROLS & MIRRORS 1800‑0932

CABLES 13/4” UPSWEEP DRAG PIPES FOR EVOLUTION SOFTAILS BRAKES TANKS & OIL FILTERS DASHES & GAUGES

•Three different styles of chrome drag pipes to choose from •Include mounting brackets and hardware •Will fit with aftermarket kick start kits •Made in the U.S.A. NOTE: Additional mounting clamps may be required to mount exhaust systems. Mounting clamps are sold separately. PART # DESCRIPTION FOR 86‑99 FXST/FLST MODELS 1800‑0946 Fishtail drag pipes 1800‑0932 Goose‑cut drag pipes 1800‑0905 Straight‑cut drag pipes

SUG. RETAIL

1800‑0905 $579.95 485.95 485.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

452

13/4” HEADPIPES FOR EVOLUTION SOFTAILS •Chrome headpipes for use with tailpipe extensions or universal mufflers •Bolt to stock mounts and include mounting hardware and heat shields •Made in the U.S.A.

1802‑0074

NOTE: Additional mounting clamps may be required to mount headpipes. Mounting clamps are sold separately. PART # DESCRIPTION FOR 95‑99 FXST/FLST MODELS 1802‑0075 Upsweep Shotgun headpipes

SUG. RETAIL $458.95

PART # DESCRIPTION FOR 84‑94 FXST/FLST MODELS 1802‑0074 Upsweep Shotgun headpipes

SUG. RETAIL $393.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel‑injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

1800‑0925

1802‑0065 Mufflers not included

13/4”

DRAG PIPES AND HEADPIPES FOR L85‑06 TOURING MODELS

EXHAUST

•Pipes feature a bright chrome finish •40” drag pipes include mounting hardware and slider channel for easier mounting •All pipes include heat shields •Headpipes can be used with a variety of universal mufflers and extensions; sold separately •Made in the U.S.A.

FUEL/AIR SYSTEMS

1802‑0080 1802‑0059

ENGINE

NOTE: Additional mounting clamps may be required to mount exhaust systems and headpipes. Mounting clamps are sold separately. PART # DESCRIPTION FOR L85‑06 FLT, FLHT, FLHX, FLHR, FLHS AND FLTR MODELS 1800‑0925 40” Slash‑cut drag pipes for L85‑06 models 1802‑00651 Dual headpipe set for 99‑06 models 1 1802‑0064 Dual headpipe set for 95‑98 models

SUG. RETAIL $344.95 689.95 689.95

PART # DESCRIPTION SUG. RETAIL FOR L85‑06 FLT, FLHT, FLHX, FLHR, FLHS AND FLTR MODELS (CONT) 1802‑00801 Dual headpipe set for L85‑94 models $689.95 1802‑0059 2‑into‑1 headpipes only for L85‑94 models 485.95 1

TRANSMISSION & DRIVELINE GASKETS & SEALS

Includes crossover mounting bracket.

ELECTRICAL 1800‑1024

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

13/4” DRAG PIPES FOR EVOLUTION SPORTSTER •Chrome drag pipes for rubber‑mounted Evolution Sportsters •Mount to OEM bracket with included mounting hardware kit •Reuses OEM heat shields •Measures 40” L •Made in the U.S.A. PART # DESCRIPTION FOR 07‑13 XL MODELS 1800‑1023 40” Slash‑cut drag pipes 1800‑1024 40” Goose‑cut drag pipes

SUG. RETAIL $223.95 223.95

CABLES 1800‑0936 PART # DESCRIPTION FOR 04‑06 XL MODELS 1800‑0936 40” Goose‑cut drag pipes

BRAKES

SUG. RETAIL $150.95

TANKS & OIL FILTERS DASHES & GAUGES

13/4” DRAG PIPES FOR EVOLUTION XL •Chrome pipes fit all 86‑03 Evolution Sportster models with stock frames •Pipes mount to OEM brackets (unless noted) •Heat shields included •Made in the U.S.A. NOTE: Additional mounting clamps may be required to mount exhaust systems and headpipes. Mounting clamps are sold separately. PART # FOR 86‑03 XL 1800‑0909

DESCRIPTION 40” Goose‑cut drag pipes

FRAMES, SUSPENSION & FENDERS

1800‑0908

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

1800‑0909 SUG. RETAIL $344.95

PART # FOR 86‑03 XL (CONT) 1800‑0908

DESCRIPTION 40” Slash‑cut drag pipes

SUG. RETAIL $344.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel‑injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

453


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE

1800‑0910

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

1800‑0933

BUILD YOUR OWN PIPE (“BYOP”) 13/4” EXHAUST PIPE KIT

13/4”

DRAG PIPES FOR XL WITH RIGID FRAMES •Chrome drag pipes fit all 86‑03 XL motors mounted in rigid frames •Include slider channels and mounting brackets •Made in the U.S.A.

1800‑0911

NOTE: Additional mounting clamps may be required to mount exhaust systems. Mounting clamps are sold separately. PART # DESCRIPTION FOR 86‑03 XL MODELS WITH RIGID FRAMES 1800‑0933 40” Slash‑cut Shotgun drag pipes w/ slider channels and hanger bracket 1800‑0910 Slash‑cut Upsweep drag pipes w/ hanger bracket 1800‑0911 Straight‑cut Upsweep drag pipes w/ hanger bracket

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

SUG. RETAIL $344.95 579.95 579.95

•Everything you need to fabricate a 13/4”‑diameter custom exhaust system •Kit includes two 24” straight pipes, two 15” 30° bend pipes, two 15” 45° bend pipes, two 15” 75° bend pipes, two 30” 160° bend pipes, two 3” sliders, six 15/8” o.d. sleeves and two 12” straight sections with two sleeves for ports; mounting brackets and flanges sold separately •Made in the U.S.A. SUG. PART # DESCRIPTION 1802‑0108 For Twin Cam, Evolution Big Twin and Sportster engines

RETAIL $230.95

0410‑2610

FISHTAIL EXTENSION

BELL TIP MUFFLERS

•17/8” chrome straight‑thru Fishtail tail pipe extension •Does not require additional brackets to install •Measures 29” L •Sold each •Made in the U.S.A.

•Real ‘60s chopper‑style look •Available in two lengths with a 13/4” i.d. inlet •Universal 3” slider mount on back side of muffler •Sold each •Made in the U.S.A. SUG.

PART # 1801‑0294

DESCRIPTION For L85‑94 FLT/FLHT models

SUG. RETAIL $134.95

PART # 0410‑2610

DESCRIPTION Short, 20” long

0410‑2611

RETAIL $148.95

PART # 0410‑2611

DESCRIPTION Long, 22” long

SUG. RETAIL $154.95

CABLES

BRAKES DS‑202057

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

454

DS‑202055

MUFFLERS •3” chrome, one‑piece 29” L mufflers with welded‑on mounting brackets need no additional clamps •All‑steel baffle construction •Sold individually •Made in the U.S.A. PART # DESCRIPTION FOR L85‑94 FLT, FLHT MODELS DS‑202057 Turnout muffler, right, 29” DS‑202058 Turnout muffler, left, 29”

SUG. RETAIL $181.95 197.95

PART # DESCRIPTION FOR L85‑94 FLT, FLHT MODELS (CONT) DS‑202055 Tapered muffler, 29” (ea.)

SUG. RETAIL $199.95

FISHTAIL MUFFLERS •21/2” chrome mufflers slip over any 13/4” diameter headpipe •Measure 30” long •Baffles are not removable •Sold each •Made in the U.S.A. PART # FOR 84 FLT/FLHT 1801‑0292

DESCRIPTION Left side

1801‑0293

SUG. RETAIL $146.95

PART # FOR 84 FLT/FLHT (CONT) 1801‑0293

DESCRIPTION Right side

SUG. RETAIL $146.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel‑injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING Powerport

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

1802-0109 1802-0113

POWERPORT HEADPIPES •Dual headpipes taken to a whole new level •PowerPort crossover provides power boost across entire rpm range •Dual pipe styling with 2-into-1 performance •2.5” heat shields •Quick, simple installation •Accepts OEM mufflers or any 95-13 OEM style mufflers •Made in the U.S.A. NOTE: Mufflers not included; must be purchased separately.

PART # DESCRIPTION WITH CHROME HEATSHIELDS 1802-0114 For 10-13 FLHT/FLHR models 1802-0109 For 09 FLHT/FLHR/FLHX/FLTR models WITH BLACK HEATSHIELDS 1802-0115 For 10-13 FLHT/FLHR models 1802-0113 For 09 FLHT/FLHR/FLHX/FLTR models

SUG. RETAIL $459.95 459.95

FUEL/AIR SYSTEMS ENGINE

539.95 539.95

TRANSMISSION & DRIVELINE 1800-0634

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

Right side 1800-0635

Left side

CABLES

TRUE DUALS HEADER SYSTEM •Systems feature individual 13/4” headpipes for increased exhaust flow •2.5” one-piece heat shields provide proportionality and seamless, unbroken flow to traditionally styled V-Twins •Accepts Cobra slip-on mufflers or any 95-13 OEM-style mufflers NOTE: Mufflers not included; must be purchased separately.

BRAKES PART # 1800-0635 1800-0634

DESCRIPTION For 07-08 FLHT, FLTR, FLHR models For 95-06 FLT, FLHT, FLTR, FLHR models

SUG. RETAIL $409.95 409.95

SPEEDSTER DUALS •Great sound that’s enhanced by the proprietary PowerPort crossover •PowerPort crossover also provides power boost across entire rpm range •Traditional dual pipe styling with 2-into-1 performance •2.5” heat shields •Straight-cut, chromed billet tip finishes off the pipes •Quick, easy installation •Made in the U.S.A.

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

Powerport

FOOTRESTS & LICENSE PLATE FRAMES

PART # DESCRIPTION WITH CHROME HEATSHIELDS 1800-1230 For 10-13 FLHT/FLHR models 1800-1176 For all 09 FLHT/FLHR/FLHX/FLTR models

SUG. RETAIL $649.95 649.95

WHEELS & AXLES

1800-1229

1800-1176

PART # DESCRIPTION WITH BLACK HEAT SHIELDS 1800-1231 For 10-13 FLHT/FLHR models 1800-1229 For all 09 FLHT/FLHR/FLHX/FLTR models

SUG. RETAIL $749.95 749.95

We recommend installing an Fi2000 POWRPRO TUNER with any exhaust change on fuel-injected models. See Fi2000 pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

455


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1801-0359

EXHAUST FUEL/AIR SYSTEMS ENGINE 1801-0361

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING 1801-0363

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES 1801-0642

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

456

3” SLIP-on MUFFLErS •3” chromed or black muffler bodies for great sound •Radially slashed, chromed billet tips can be rotated to three positions •Includes OEM-style cross-over on models that came stock with one for enhanced performance •Comes with 2” constant velocity baffles that use bonded e-class sleeve with stainless mesh •Fits stock headpipes •Easy installation using stock mounting brackets •Made in the U.S.A. PArT # CHroME 1801-0359 1801-0360 1801-0361 1801-0362 1801-0488 1801-0363 1801-0364 1801-0365 1801-0366 1801-0642

DESCrIPTIon

SUG. rETAIL

For 00-06 FLSTF/FXSTD models For 07-13 FLSTF/FXSTD models For 07-13 FLSTN/FLSTSB models For 07-13 FXST/B/C, FLSTC, FXCW/C models For 00-06 FXST/B/C/S models For 91-13 FXD/FXDWG models (except 08-13 FXDF, 10-13 FXDWG, 12-13 FLD) For 08-13 FXDF, 10-13 FXDWG models For 95-13 FLHT/FLHR/FLHX/FLTR and H-D FL Trike models For 04-13 XL models For 12-13 XL1200V models

$309.95 309.95 309.95 309.95 309.95 309.95 309.95 349.95 309.95 309.95

3” Cut-away PArT # BLACK 1801-0484 1801-0485 1801-0486 1801-0487 1801-0489 1801-0490 1801-0491 1801-0492 1801-0493 1801-0643

DESCrIPTIon For 00-06 FLSTF/FXSTD models For 07-13 FLSTF/FXSTD models For 07-13 FLSTN/FLSTSB models For 07-13 FXST/B/C, FLSTC, FXCW/C models For 00-06 FXST/B/C/S models For 91-13 FXD/FXDWG models (except 08-13 FXDF, 10-13 FXDWG, 12-13 FLD) For 08-13 FXDF, 10-13 FXDWG models For 95-13 FLHT/FLHR/FLHX/FLTR and H-D FL Trike models For 04-13 XL models For 12-13 XL1200V models

SUG. rETAIL $359.95 359.95 359.95 359.95 359.95 359.95 359.95 399.95 359.95 359.95

We recommend installing an Fi2000 PowrPro TUnEr with any exhaust change on fuel-injected models. See Fi2000 pages in Section 7.

SEE PAGE 335 For IMPorTAnT InForMATIon rEGArDInG CErTAIn wArrAnTY AnD EXHAUST rEGULATorY CoMPLIAnCE InForMATIon. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

TRI-FLO SLIP-ON MUFFLERS •Tri-oval-shaped muffler rear seamlessly transforms into 4-inch round front •5-inch wide, 4-inch tall thin-line aluminum tip •3-inch core for superior performance •Acoustical engineering developments allow an incredibly deep sound because of intense, class-leading resonance absorption and prevention •Uses proprietary materials with specific acoustical dampening and thermal insulation properties •The frequency and location of the perforation patterns in the cores creates significant sound scattering in the mid frequencies, which helps to enhance the low frequency tones •Made in the U.S.A. PART # 1801-0637

DESCRIPTION For 95-13 FLT/FLHT/FLHR/FLHX/FLTR, chrome

LUGGAGE SEATS & SISSY BARS 1801-0637

SUG. RETAIL $599.95

PART # 1801-0638

DESCRIPTION For 95-13 FLT/FLHT/FLHR/FLHX/FLTR, black

EXHAUST SUG. RETAIL $649.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

POWR-FLO 41/2” SLIP-ON MUFFLERS

ELECTRICAL

•4.5 inch body tapers to 4-inch round at the front •4.5-inch machined aluminum, thin-line tip •3-inch core for superior performance •Acoustical engineering developments allow an incredibly deep sound because of intense, class-leading resonance absorption and prevention •Uses proprietary materials with specific acoustical dampening and thermal insulation properties •The frequency and location of the perforation patterns in the cores creates significant sound scattering in the mid frequencies, which helps to enhance the low frequency tones •Made in the U.S.A. PART # 1801-0639

DESCRIPTION For 95-13 FLT/FLHT/FLHR/FLHX/FLTR, chrome

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1801-0639

SUG. RETAIL $599.95

PART # 1801-0640

DESCRIPTION For 95-13 FLT/FLHT/FLHR/FLHX/FLTR, black

SUG. RETAIL $649.95

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES CENTER-PRO SLIP-ON MUFFLER •Industry first, center-port exhaust with superior performance •Unique 2-into-1 design •Both mufflers join at the rear beneath the fender for center port exhaust location •Slips on as a single unit to the stock head pipes (or Cobra PowerPort Dual head pipes) •Not designed to fit on motorcycles using extended bags •Single, polished and chromed steel exhaust tip finished with a perfectly rolled edge •Constant velocity baffles are not removable •Made in the U.S.A. PART # 1801-0641

DESCRIPTION For 95-13 FLT/FLHT/FLHR/FLHX/FLTR

SUG. RETAIL $599.95

We recommend installing an Fi2000 POWRPRO TUNER with any exhaust change on fuel-injected models. See Fi2000 pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

457


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE TRI-OVAL SLIP-ON MUFFLERS SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

•Incredible deep resonance that passes existing sound guidelines •Tri-Oval design with full-size, billet V-tip with dual exhaust ports •Round front seamlessly morphs to tri-oval shape at the rear •Nearly 5.5” wide and 3.5” high at the rear •Increased performance gains over stock mufflers •Also available with black body and chromed tip •Mufflers end at the rear of the bags •Simple installation; mounts to stock headpipes or to Cobra PowerPort headpipes •Made in the U.S.A. PART # CHROME 1801-0358 1801-0455

DESCRIPTION

1801-0358

SUG. RETAIL

For 95-13 FLHT/FLHR/FLHX/FLTR models For 10 FLHX/FLTRX models

$539.95 269.95

PART # BLACK 1801-0408

DESCRIPTION

SUG. RETAIL

For 95-13 FLHT/FLHR/FLHX/FLTR models

$639.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

BLV6201SD

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1801-0497

CABLES BLV6201UC

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

458

1801-0099

1801-0590

Billet end tip

4” SLIP-ON MUFFLERS •Increase horsepower and torque with a deeper, more aggressive exhaust note •Welded from mild steel then bathed in a four-step chrome-plating process •4” muffler body uses a cooling chamber with proprietary technology to prevent blueing •Available in several styles: straight cut features billet tips •All necessary mounting hardware and instructions included, ensuring problem-free installation •Made in the U.S.A. PART # DESCRIPTION FOR 95-13 FLT/FLHT/FLHR/FLHX/FLTR MODELS 1801-0497 Scallop cut BLV6201SD Slash Down BLV6201UC Upper Cut 1801-0099 Straight Cut w/ billet tip

SUG. RETAIL $499.95 419.95 419.95 485.95

PART # DESCRIPTION FOR 12-13 FLD 1801-0590 Slash Down FOR 10 FLHX/FLTRX MODELS 1801-0454 Straight Cut w/ billet tip

SUG. RETAIL $249.95 249.95

We recommend installing an Fi2000 POWRPRO TUNER with any exhaust change on fuel-injected models. See Fi2000 pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

WINDSHIELDS & FAIRINGS

TRI-PRO 2-INTO-1 EXHAUST •2-into-1 exhaust system delivers increased low- and mid-range performance gains over the stock system •Features a unique tri-oval muffler 1800-1292 design, with a full-size, aluminum V-tip with dual exhaust ports •Available in chrome or black with a chromed aluminum V-tip •Heat shields mount to head pipes; heat shields cover collector area •Made in the U.S.A. PART # FOR 07-11 FXS/FXST/FLST 1800-1292 1800-1293

6

MUFFLER/HEAT SHIELD MODELS Chrome/chrome Black/black

SUG. RETAIL $689.95 789.95

TOURING AUDIO & COMMUNICATION 1800-1293 PART # MUFFLER/HEAT SHIELD FOR 86-06 FXST/FLST MODELS 1800-1290 Chrome/chrome 1800-1291 Black/black

SUG. RETAIL $689.95 789.95

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

1800-0087

TRANSMISSION & DRIVELINE

1800-0413 1800-1227

SPEEDSTER EXHAUSTS (WITH POWERPORT) •PowerPort crossover makes for a significant power increase from just off idle to redline, which leads to a deep and aggressive exhaust tone •PowerPort increases power and overall performance by providing superior scavenging of exhaust gases over most standard exhaust systems; similar to what you might expect from a 2-into-1 system •Large 2.5”, 222°, full-length heat shields fit from the exhaust ports to the billet tips for a seamless look and no blueing •Show-chrome or black finished heat shields with beautifully machined chrome billet end caps for a truly custom finish •Available in slash-down, swept, short, long and xtra long styles •Includes mounting hardware and removable baffles for simple installation •Power with social responsibility •Made in the U.S.A.

GASKETS & SEALS Billet tip

ELECTRICAL

LIGHTING POWERPORT 1800-1402

NOTE: The Swept exhaust requires the removal of the right-side passenger footpeg; optional relocation bracket curves up from under the pipe to relocate the peg in the proper position. PART # DESCRIPTION SUG. RETAIL SLASH-DOWN 1800-1397 For all 12-13 FXST/FLST models, chrome heat shields $629.95 1800-1398 For all 12-13 FXST/FLST models, black heat shields 679.95 1800-0413 For all 07-11 FXST/FLST models, chrome heat shields 629.95 1800-1226 For all 07-11 FXST/FLST models, black heat shields 679.95 1800-0087 For all 86-06 FXST/FLST models, chrome heat shields 609.95 1800-0761 For all 08-11 FXCW/C models, chrome heat shields 629.95 1800-1399 For all 12-13 Dyna models (except FLD), chrome heat shields 629.95 1800-1400 For all 12-13 Dyna models (except FLD), black heat shields 679.95

PART # DESCRIPTION SLASH-DOWN (CONT) 1800-0808 For all 06-11 Dyna models, chrome heat shields 1800-1227 For all 06-11 Dyna models, black heat shields 1800-0088 For all 91-05 Dyna models, chrome heat shields 1800-1402 For all 07-13 XL models, chrome heat shields 1800-0414 For all 07-13 XL models, chrome heat shields 1800-1403 For all 07-13 XL models, black heat shields 1800-1401 For all 04-06 XL models, chrome heat shields

SUG. RETAIL $629.95 679.95 609.95 629.95 629.95 679.95 609.95

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1861-0534

DESCRIPTION For For For For For

07-11 07-11 86-06 08-11 08-11

FOOTRESTS & LICENSE PLATE FRAMES

1800-1225

1800-0972 PART # SWEPT 1800-0973 1800-1224 1800-0972 1800-0974 1800-1225

FRAMES, SUSPENSION & FENDERS

SUG. RETAIL

FXST/FLST models, chrome heat shields FXST/FLST models, black heat shields FXST/FLST models, chrome heat shields FXCW/C models, chrome heat shields FXCW/C models, black heat shields

689.95 789.95 689.95 699.95 789.95

PART # DESCRIPTION SWEPT (CONT) 1861-0534 Optional footpeg relocation bracket for 86-11 FXST/FLST models 1861-0535 Optional footpeg relocation bracket for 08-11 FXCW/C models

SUG. RETAIL

$29.95 29.95

SPEEDSTER EXHAUSTS continued on next page.

We recommend installing an Fi2000 POWRPRO TUNER with any exhaust change on fuel-injected models. See Fi2000 pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

459


SECTION

6 SPEEDSTER EXHAUSTS (WITH POWERPORT) (CONT)

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1800-1467

1800-1489 PART # DESCRIPTION SUG. RETAIL SHORT SWEPT 1800-1489 For all 10-13 Dresser models, chrome heat shields $699.95 1800-1490 For all 10-13 Dresser models, black heat shields 799.95 1800-1381 For all 12-13 FXST/FLST models, chrome heat shields 699.95 1800-1382 For all 12-13 FXST/FLST models, black heat shields 799.95 1800-1379 For all 07-11 FXST/FLST models, chrome heat shields 699.95 1800-1380 For all 07-11 FXST/FLST models, black heat shields 799.95

PART # DESCRIPTION SUG. RETAIL SHORT SWEPT (CONT) 1800-1378 For all 86-06 FXST/FLST models, chrome heat shields $699.95 1800-1468 For all 12-13 Dyna models (except FLD), chrome heat shields 699.95 1800-1469 For all 12-13 Dyna models (except FLD), black heat shields 799.95 1800-1466 For all 06-11 Dyna models, chrome heat shields 699.95 1800-1467 For all 06-11 Dyna models, black heat shields 799.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL 1800-0806

PART # SHORTS 1800-0759 1800-0025 1800-0806 1800-0026 1800-1392 1800-1391 1800-0210

DESCRIPTION For all 08-11 FXCW/C models, chrome heat shields For all 86-06 FXST/FLST models, chrome heat shields For all 06-11 Dyna models, chrome heat shields For all 91-05 Dyna models, chrome heat shields For all 07-12 XL models, chrome heat shields For all 04-06 XL models, chrome heat shields For all 04-06 XL models, chrome heat shields

SUG. RETAIL $599.95 599.95 599.95 599.95 599.95 599.95 599.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

Billet tip

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1800-0027

PART # LONGS 1800-1404 1800-0415 1800-0027 1800-0809 1800-0028

DESCRIPTION For For For For For

all all all all all

12-13 07-11 86-06 06-11 91-05

FXST/FLST models, chrome heat shields FXST/FLST models, chrome heat shields FXST/FLST models, chrome heat shields Dyna models, chrome heat shields Dyna models, chrome heat shields

SUG. RETAIL $629.95 629.95 609.95 629.95 609.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

460

1800-0195

PART # DESCRIPTION XTRA LONGS 1800-0416 For all 07-08 Dresser models, chrome heat shields 1800-0195 For all 95-06 Dresser models, chrome heat shields

SUG. RETAIL $629.95 609.95

We recommend installing an Fi2000 POWRPRO TUNER with any exhaust change on fuel-injected models. See Fi2000 pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION 1800-0199

1800-1396

DRAGSTERS

LUGGAGE

•Perfect update to traditional drag pipes; maintains clean, pure drag-pipe appearance •Full-length, 2.5” heat shields with a 222° wraparound for a non-blueing appearance •Capped with machined and chromed billet tips •Removable performance cores •Feature power with social responsibility •Made in the U.S.A. PART # 1800-0411 1800-0760 1800-0199 1800-0807

SEATS & SISSY BARS EXHAUST Billet end tip

1800-0807

DESCRIPTION For all 07-11 FXST/FLST models For all 08-11 FXCW/C models For all 86-06 FXST/FLST models For all 06-11 Dyna models

SUG. RETAIL $519.95 519.95 499.95 519.95

PART # 1800-0198 1800-1396 1800-0412 1800-1395

DESCRIPTION For all 91-05 Dyna models For all 07-13 XL models For all 07-13 XL models For all 04-06 XL models

SUG. RETAIL $499.95 519.95 519.95 499.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING 21/4” HOT ROD EXHAUST SYSTEM •13/4” headpipes flow into 21/4” muffler bodies •Full-length 215° wraparound heat shields match the diameter of muffler bodies •Headpipes, mufflers and heat shields are triple chrome-plated •Removable baffles accessed by backing out a single screw •All necessary mounting hardware and instructions included, ensuring problem-free installation •Made in the U.S.A. PART # BLV6800

DESCRIPTION For 86-06 FXST/FLST

SUG. RETAIL $419.95

31/2” DELUXE SLASH CUT EXHAUST •13/4” headpipes flow into 31/2” muffler bodies •Mufflers feature radial slash cut •Full-length 215° wraparound heat shields run from exhaust port to muffler body •Headpipes, mufflers and heat shields are triple chrome-plated •Removable baffles accessed by backing out a single screw •All necessary mounting hardware and instructions included, ensuring problemPART # DESCRIPTION SUG. RETAIL free installation BLV6500 For 86-06 FXST/FLST $419.95 •Made in the U.S.A.

PART # 1800-1383 1800-0408 1800-0204 1800-1384 1800-0805 1800-0203 1800-0757 1800-0756 1800-1321

DESCRIPTION SUG. RETAIL For all 12-13 FXST/FLST models, chrome $589.95 For all 07-11 FXST/FLST models, chrome 589.95 For all 86-06 FXST/FLST models, chrome 569.95 For all 12-13 Dyna models (except FLD), chrome 589.95 For all 06-11 Dyna models, chrome 589.95 For all 91-05 Dyna models, chrome 569.95 For all 07-08 Dresser models, chrome 599.95 For all 95-06 Dresser models, chrome 579.95 For all 04-06 XL models, chrome 569.95

CABLES

BRAKES TANKS & OIL FILTERS

POWERPRO HP 2-INTO-1 EXHAUST •New design with a sleek cylindrical muffler body in addition to the megaphone style of the original PowerPro •Lustrously chromed 3.5” muffler body with a delicately machined chromed billet tip •Full-length chrome or black collector heat shield coverage •Internal cooling technology for non-blueing muffler body •Double-insulated body •Removable baffles •Made in the U.S.A.

HANDLEBARS, CONTROLS & MIRRORS

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

1800-0204

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

1800-1322 PART # 1800-1322 1800-1323 1800-1324

DESCRIPTION For all 04-06 XL models, black heat shields For all 07-13 XL models, chrome For all 07-13 XL models, black heat shields

SUG. RETAIL $669.95 589.95 689.95

We recommend installing an Fi2000 POWRPRO TUNER with any exhaust change on fuel-injected models. See Fi2000 pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

461


SECTION

6

WINDSHIELDS & FAIRINGS TOURING 1802-0131

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

1802-0251

POWER TRUE DUALS HEADERS •Independent dual look with “under the bike” cross-over •Hidden crossover passage between front and rear pipes for maximum performance •Full black ceramic heat shield with 220° coverage •Available in chrome or Jet-Hot® ceramic finish •Compatible with 95-13 style slip-on Dresser mufflers •Made in the U.S.A. PART # DESCRIPTION FOR 09-13 FLHT, FLHR, FLHX, FLTR MODELS 1802-01311 Chrome 1802-02511 Black ceramic

SUG. RETAIL $524.95 624.95

FUEL/AIR SYSTEMS

PART # DESCRIPTION FOR 95-08 FLT, FLHT, FLHR, FLHX, FLTR MODELS 1802-01302 Chrome 1802-02502 Black ceramic 1 2

SUG. RETAIL $524.95 624.95

Has 12mm and 18mm sensor ports and plugs. Has 18mm sensor ports and plugs.

ENGINE TRANSMISSION & DRIVELINE

1801-0472 1801-0473

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

SPO® OVAL SLIP-ON MUFFLERS

1801-0595

•Newly restyled S&S SPO® mufflers •Same great performance as S&S performance oval slip-ons, but feature sculpted alloy end-caps with chrome or black finish •Muffler features double-walled PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION construction, dual-layer wrapping FOR 95-13 FLT, FLHT, FLHR, FLHX AND FLTR MODELS FOR 95-13 FLT, FLHT, FLHR, FLHX AND and quality chrome or Jet-Hot® 1801-0472 Chrome w/ chrome end-cap $779.95 FLTR MODELS (CONT) ceramic finish 1801-0473 Chrome w/ high-temp black 1801-0595 Jet-Hot® ceramic •Sold in pairs Xylan® end-cap w/ chrome end-cap 899.95 •Made in the U.S.A.

SUG. RETAIL

$779.95

BRAKES 4” RACE TOUR MUFFLERS TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

462

•Produces exceptional mid-range to high end torque and horsepower •Loud aggressive sound with Race Tour Baffle •Fits all stock and aftermarket headers •4” diameter is the same as stock mufflers •Right muffler has special clearance for axle nut •Available with slash-down end caps or without end caps (opt. end caps must be ordered separately) in either chrome or Jet-Hot® black ceramic finish •Mounting hardware and instructions included for installation of the end cap •Made in the U.S.A.

1801-0616

1801-0619 Shown with 1861-0812 end caps

FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE MODELS (EXCEPT 10 FLHX/FLTRX) PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION 4” MUFFLERS, CHROME (PR.) OPTIONAL 4” END CAPS (PR.) 1801-0616 With slash down end caps $549.95 1861-0812 Chrome straight 1801-0618 Without end caps 524.95 1861-0813 Black straight 4” MUFFLERS, JET-HOT® BLACK CERAMIC (PR.) 1861-0814 Chrome sculpted Black sculpted 1801-0617 With slash down end caps 649.95 1861-0815 1801-0619 Without end caps 649.95

1861-0813

1861-0814 SUG. RETAIL $124.95 124.95 124.95 124.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION 1801-0462

LUGGAGE

1801-0461

SEATS & SISSY BARS EXHAUST 1801-0464

FUEL/AIR SYSTEMS

1801-0596

31/2” POWER-TOUR MUFFLERS

ENGINE

•31/2” diameter mufflers with black ceramic finish •Great sound and increased performance •Work with stock or modified engines •Available in Power-Tour performance style •Sold in pairs •Made in the U.S.A.

TRANSMISSION & DRIVELINE

1801-0597

FOR 95-13 FLT, FLHT, FLHR, FLHX, FLTR AND H-D FL TRIKE MODELS WITH DUAL EXHAUST PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION POWER-TOUR POWER-TOUR (CONT) 1801-0461 Slash-back, chrome $398.95 1801-0464 Chrome w/ black Teflon™ billet end caps 1801-0462 Slash-down, chrome 398.95 1801-0597 Black ceramic w/ chrome billet end caps 1801-0596 Slash-down, black ceramic 500.00

SUG. RETAIL $547.95 629.95

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

1801-0233

BRAKES

0410-6001

1801-0140

TANKS & OIL FILTERS DASHES & GAUGES

1801-0536

3” SLIP-ON PERFORMANCE MUFFLERS

FRAMES, SUSPENSION & FENDERS

•Increase your performance on a stock or modified motor •Finished in show-quality chrome, and are compatible with stock headpipes, mounting brackets, hardware and heat shields •Available in slash-cut or tapered design •Slash-cut baffles are removable, tapered are not removable •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 07-13 FXST/B/C, FLST/C, 08-11 FXCW/C 1801-0233 Slash-cut $389.95 1801-0232 Tapered 389.95 FOR 95-13 DYNA (EXCEPT 12-13 FLD, 08-13 FXDF, 10-13 FXDWG) 0410-6001 Slash-cut 324.95 1801-0140 Tapered 324.95

1801-0017 PART # FOR 08-13 FXDF, 10-13 FXDWG 1801-0536 FOR 04-13 XL 1801-0017 1801-0144

DESCRIPTION Slash-cut Slash-down Tapered

SUG. RETAIL $389.95 351.95 339.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

463


SECTION

6 1800-1296

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

1800-1295 1800-0999

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

CUSTOM EXHAUST SYSTEMS •Mandrel bent from .065” tube, then chromed to a show finish •Heat shields are included (unless noted) •All pipes (except 131’s) come with dual O2 sensor ports and plugs •103’s are triple stepped from 13/4” to 21/4” to 21/2” •131’s are triple stepped into a soft bend on a 2.5” mandrel bent thick-walled pipe •Phat’s pipes are stepped from 13/4” to 21/4”; available with heat shields •D-2’s are triple stepped ending with a 2.5” slash cut; available with chrome heat shields or black ceramic heat shields with holes that allow the chrome pipes to show through •D-3’s are triple stepped ending with 2.5” slash cut •Works with both left and right side drive bikes; also works on Big Dog motorcycles •Made in the U.S.A. PART # DESCRIPTION FOR 86-11 FXST/FLST AND MOST CUSTOM RIGID MODELS 1800-0999 103’s 1800-1295 Phat’s w/ heat shields

SUG. RETAIL $821.95 849.95

1800-1159

PART # DESCRIPTION SUG. RETAIL FOR 86-11 FXST/FLST AND MOST CUSTOM RIGID MODELS (CONT) 1800-1150 D-2’s w/ chrome heat shields $899.95 1800-1296 D-2’s w/ black heat shields 899.95 1800-1159 D-3’s 849.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

224 MUFFLERS •Give your V-Twin the look and sound of true American muscle •21/4” diameter bodies •Four fiber glass wrapped removable baffles unleash the growl and rumble that will bring your bike to life •Customize your pipes with optional Family Jewel billet tips (sold separately) •Easily installs to your stock head pipes •Sold in pairs •Made in the U.S.A. PART # 1801-0494

1801-0494

DESCRIPTION For 95-13 FLT/FLHT/FLHR/FLTR and H-D FL Trike

SUG. RETAIL $499.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

464

1811-1473

BELL-END MEGAPHONE MUFFLERS •Retro styling brings back the glory days of choppers •13/4” inlet; reducer allows additional fitment to 15/8” and 11/2” •Removable baffle •Available in standard or upswept styles •Sold each PART # 1811-1473 1811-1474 1811-1475

DESCRIPTION Standard, right- or left-side Upswept, left-side Upswept, right-side

SUG. RETAIL $73.95 82.95 82.95

1811-1475

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST 1800-0029

FUEL/AIR SYSTEMS

1801-0299

RT-ONE EXHAUST SYSTEM •Complete exhaust system includes a large-diameter headpipe exiting into a lightweight aluminum muffler •Big power increase and huge weight savings •Straight-through perforated core offers maximum flow •Made in the U.S.A.

ENGINE RT-FIVE SLIP-ON MUFFLERS

NOTE: Jardine RT-One exhaust systems and slip-ons feature a high-flow large-diameter perforated core for maximum performance. Sound levels are racetrack-oriented. Jardine recommends the use of a QMI (Quiet Module Insert) (sold separately) to civilize and control the exhaust tone to reasonable levels for street use.

•Available with aluminum or carbon fiber canisters •Free-flowing race baffle •Precision fit with fixed mounting points •Carbon fiber end cap •Dyno-tested for maximum horsepower gain •Include stainless steel mid-pipes •Made in the U.S.A.

PART # DESCRIPTION FOR 00-09 BUELL BLAST 1800-0029 RT-One system 1860-0008 Quiet Module Insert

PART # FOR 08-09 BUELL 1801-0299 1801-0300

SUG. RETAIL $345.95 39.95

DESCRIPTION 1125R Aluminum canister, carbon fiber end cap Carbon fiber canister, carbon fiber end cap

TRANSMISSION & DRIVELINE GASKETS & SEALS SUG. RETAIL $537.95 644.95

ELECTRICAL

LIGHTING RT-ONE SLIP-ONS •Boost power over a wide rpm band •Free-flowing race-style baffle •Dyno-tested for smooth power delivery and superior performance •Available with polished aluminum or carbon fiber canisters •Quiet Module Insert (QMI) sold separately •Made in the U.S.A.

HANDLEBARS, CONTROLS & MIRRORS CABLES 1860-0007

BRAKES

NOTE: Jardine RT-One exhaust systems and slip-ons feature a high-flow large-diameter perforated core for maximum performance. Sound levels are racetrack-oriented. Jardine recommends the use of a QMI (Quiet Module Insert) to civilize and control the exhaust tone to reasonable levels for street use. PART # DESCRIPTION SUG. RETAIL FOR 03-08 XB9R, 04-09 XB12R/XB12S, 05-09 XB9SX, 08-09 XB12X (EXCEPT INTERNATIONAL MODELS) 1801-0004 Aluminum canister $361.95 1801-0005 Carbon fiber canister 472.95

1801-0004 PART # DESCRIPTION SUG. RETAIL FOR 03-08 XB9R, 04-09 XB12R/XB12S, 05-09 XB9SX, 08-09 XB12X (EXCEPT INTERNATIONAL MODELS) (CONT) 1860-0007 Quiet Module Insert $39.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

GP1 SLIP-ON MUFFLER •Stylish, affordable and lightweight •Muffler features a black powder-coated canister •Features a laser-etched GP1 logo •Installation is a breeze, requiring at the most a couple of wrenches and a screwdriver •Made in the U.S.A. PART # 1801-0261

DESCRIPTION For 02-08 XB9R, 05-09 XB9SX, 04-09 XB12R/S, 07-09 XB12X (except International models)

SUG. RETAIL $428.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

465


SECTION

6

WINDSHIELDS & FAIRINGS APEX EXHAUST SYSTEMS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

•Aggressive sound and look for closed course use only •Saves significant weight over stock system; improves even more the power-to-weight ratio •Complete system allows simple access to clutch and other areas under race conditions without dropping the engine out •Available in titanium or stainless steel •Made in the U.S.A. PART # 1800-1297 1800-1232

DESCRIPTION For 09-12 XR1200/1200X, titanium For 09 BUELL 1125R/CR/RR, stainless steel

1800-1297

SUG. RETAIL $1,999.95 1,699.95

EXHAUST 1801-0465

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

APEX SLIP-ON MUFFLERS •Carbon fiber or titanium slip-ons complement “racer look” of machines •Integrated fit to coordinate with body lines and maintain centralized mass design of motorcycle •Unique and distinctive sound due to overall diamond shape and outlet; quiet insert also included •Considerable weight savings over stock translates into more power •Improved ground clearance •Slip-on design provides easy installation •Made in the U.S.A.

GASKETS & SEALS ELECTRICAL

NOTE: PART #1801-0357 may require simple re-adjustment of stock header heat shields.

LIGHTING 1801-0357

HANDLEBARS, CONTROLS & MIRRORS

PART # 1801-0357 1801-0465

DESCRIPTION For 09-12 XR1200/1200X; carbon For 09 1125R/CR/RR; titanium

SUG. RETAIL $899.95 549.95

CABLES

BRAKES TANKS & OIL FILTERS 1812-0170

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

466

1812-0169

FAMILY JEWEL EXHAUST TIPS •Each tip can be rotated into almost limitless positions, and are sold individually so you can mix and match them to create a unique look for your motorcycle •Tips are adaptable to almost any straight-cut, 21/4” exhaust tube, such as those offered by Baron, LA Chopper, Samson, D&D, Cobra, BUB and Hardkrome •All tips come with a seamless mounting system for that smooth look •Made in the U.S.A. PART # 1812-0169 1812-0170 1812-0171

DESCRIPTION Xtreme Slash Scalloped Mini Scalloped

SUG. RETAIL $59.95 59.95 49.95

1812-0171

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS TOURING Clean Cut Contrast Cut™

Clean Cut Chrome

Slash Contrast Cut™

Slash Chrome

AUDIO & COMMUNICATION

Sweep Contrast Cut™

LUGGAGE Sweep Contrast Cut™

ELITE EXHAUST END CAPS

Sweep Chrome

Tech 10 Contrast Cut™

Merc Black Ops Tech 10 Chrome

•CNC machined billet aluminum construction •Available in chrome and Contrast Cut™ •Contrast Cut™ starts with a polished end cap that has been black anodized, then re-cut to open up the design •Available in four designs and six applications •Sold each •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR RINEHART 3.5 MUFFLERS 1802-0135 Clean Cut, Contrast Cut $99.95 1802-0136 Clean Cut, chrome 99.95 1802-0137 Slash, Contrast Cut 99.95 1802-0138 Slash, chrome 99.95 1802-0139 Sweep, Contrast Cut 99.95 1802-0140 Sweep, chrome 99.95 1802-0141 Tech 10, Contrast Cut 99.95 1802-0142 Tech 10, chrome 99.95 1802-0223 Merc, Contrast Cut 99.95 1802-0224 Merc, chrome 99.95 1802-0225 Merc, Black Ops 99.95 FOR RINEHART 4” MUFFLERS 1802-0143 Clean Cut, Contrast Cut 99.95 1802-0144 Clean Cut, chrome 99.95 1802-0145 Slash, Contrast Cut 99.95 1802-0146 Slash, chrome 99.95 1802-0147 Sweep, Contrast Cut 99.95 1802-0148 Sweep, chrome 99.95 1802-0149 Tech 10, Contrast Cut 99.95 1802-0150 Tech 10, chrome 99.95 1802-0226 Merc, Contrast Cut 99.95 1802-0227 Merc, chrome 99.95 1802-0228 Merc, Black Ops 99.95 FOR SCREAMIN’ EAGLE 3.5” MUFFLERS 1802-0151 Clean Cut, Contrast Cut 99.95 1802-0152 Clean Cut, chrome 99.95 1802-0153 Slash, Contrast Cut 99.95 1802-0154 Slash, chrome 99.95 1802-0155 Sweep, Contrast Cut 99.95 1802-0156 Sweep, chrome 99.95 1802-0157 Tech 10, Contrast Cut 99.95 1802-0158 Tech 10, chrome 99.95 1802-0229 Merc, Contrast Cut 99.95

Merc Contrast Cut™

PART # DESCRIPTION SUG. RETAIL FOR SCREAMIN’ EAGLE 3.5” MUFFLERS (CONT) 1802-0230 Merc, chrome $99.95 1802-0231 Merc, Black Ops 99.95 FOR SCREAMIN’ EAGLE 4” MUFFLERS 1802-0159 Clean Cut, Contrast Cut 99.95 1802-0160 Clean Cut, chrome 99.95 1802-0161 Slash, Contrast Cut 99.95 1802-0162 Slash, chrome 99.95 1802-0163 Sweep, Contrast Cut 99.95 1802-0164 Sweep, chrome 99.95 1802-0165 Tech 10, Contrast Cut 99.95 1802-0166 Tech 10, chrome 99.95 1802-0232 Merc, Contrast Cut 99.95 1802-0233 Merc, chrome 99.95 1802-0234 Merc, Black Ops 99.95 FOR BASSANI SHORT MEGAPHONE (1/2” INTERNAL LIP) 1802-0167 Clean Cut, Contrast Cut 99.95 1802-0168 Clean Cut, chrome 99.95 1802-0169 Slash, Contrast Cut 99.95 1802-0170 Slash, chrome 99.95 1802-0171 Sweep, Contrast Cut 99.95 1802-0172 Sweep, chrome 99.95 1802-0173 Tech 10, Contrast Cut 99.95 1802-0174 Tech 10, chrome 99.95 1802-0235 Merc, Contrast Cut 99.95 1802-0236 Merc, chrome 99.95 1802-0237 Merc, Black Ops 99.95 FOR BASSANI LONG MEGAPHONE (1” INTERNAL LIP) 1802-0175 Clean Cut, Contrast Cut 99.95 1802-0176 Clean Cut, chrome 99.95 1802-0177 Slash, Contrast Cut 99.95 1802-0178 Slash, chrome 99.95

SEATS & SISSY BARS EXHAUST

Merc Chrome

PART # DESCRIPTION FOR BASSANI LONG MEGAPHONE (1” INTERNAL LIP) (CONT) 1802-0179 Sweep, Contrast Cut 1802-0180 Sweep, chrome 1802-0181 Tech 10, Contrast Cut 1802-0182 Tech 10, chrome 1802-0238 Merc, Contrast Cut 1802-0239 Merc, chrome 1802-0240 Merc, Black Ops FOR VANCE & HINES 3.5” MUFFLERS 1802-0183 Clean Cut, Contrast Cut 1802-0184 Clean Cut, chrome 1802-0185 Slash, Contrast Cut 1802-0186 Slash, chrome 1802-0187 Sweep, Contrast Cut 1802-0188 Sweep, chrome 1802-0189 Tech 10, Contrast Cut 1802-0190 Tech 10, chrome 1802-0241 Merc, Contrast Cut 1802-0242 Merc, chrome 1802-0243 Merc, Black Ops FOR VANCE & HINES 4” MUFFLERS 1802-0191 Clean Cut, Contrast Cut 1802-0192 Clean Cut, chrome 1802-0193 Slash, Contrast Cut 1802-0194 Slash, chrome 1802-0195 Sweep, Contrast Cut 1802-0196 Sweep, chrome 1802-0197 Tech 10, Contrast Cut 1802-0198 Tech 10, chrome 1802-0244 Merc, Contrast Cut 1802-0245 Merc, chrome 1802-0246 Merc, Black Ops

SUG. RETAIL

$99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1802-0212

EXHAUST TIPS FOR RINEHART EXHAUST •CNC-machined from 6061 T-6 billet aluminum •Designed to match Eddie Trotta Reverse Cut Fork Sliders •Available in two styles for 31/2” and 4” Rinehart exhaust in either chrome or black anodized finishes •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION FOR 31/2” RINEHART EXHAUST 1802-0216 Reverse cut, chrome 1802-0215 Reverse cut, black 1802-0218 Cross cut, chrome 1802-0217 Cross cut, black

FRAMES, SUSPENSION & FENDERS

1802-0211

FOOTRESTS & LICENSE PLATE FRAMES

1802-0214 1802-0213 SUG. RETAIL $309.95 309.95 309.95 309.95

PART # DESCRIPTION FOR 4” RINEHART EXHAUST 1802-0212 Reverse cut, chrome 1802-0211 Reverse cut, black 1802-0214 Cross cut, chrome 1802-0213 Cross cut, black

SUG. RETAIL $309.95 309.95 309.95 309.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

467


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE

1802-0200

1802-0091

1802-0201

EXHAUST TIPS •CNC-machined billet aluminum construction •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION FOR BASSANI 4” MEGAPHONE DRESSER MUFFLERS 1802-0091 Black diamond edge FOR 95-08 RINEHART “TRUE DUAL” DRESSER MUFFLERS 1802-0092 Black diamond edge

SUG. RETAIL $339.95 339.95

PART # DESCRIPTION FOR RINEHART 4” DIAMETER MUFFLERS 1802-0199 Gloss black powder coated 1802-0200 Chrome 1802-0201 Black diamond edge

SUG. RETAIL $359.95 359.95 499.95

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1802-0100

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1802-0101

CHROME EXHAUST TIPS FISHTAIL EXHAUST TIP •Chromed steel exhaust tip for all 13/4” o.d. exhaust pipes •Sold each NOTE: Clamps must be purchased separately. PART # DS-202049

DESCRIPTION Exhaust tip

SUG. RETAIL $99.95

•Transform the stock mufflers into the nostalgic fishtail or more modern six-gun style •Clamp-on design adds a lot of style for a lot less than a custom system •Tips do not affect sound levels or exhaust performance •Sold in pairs PART # DESCRIPTION FOR 95-13 FLT, FLHT, FLHR, FLHX, FLTR MODELS (EXCEPT 10 FLHX/FLTRX) 1802-0100 Six-gun 1802-0101 Fishtail

SUG. RETAIL $149.95 149.95

1802-0262

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1861-0769

1861-0795

CABLES 1861-0799

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

468

1861-0803

SLIP-ON MUFFLER SLEEVES •Customize the look of your exhaust •Muffler sleeves are laser-cut steel construction •Install on mufflers for custom look or to hide scratches, scrapes, discoloration and rust •Durable black powdercoat finish •Sold in pairs •Made in the U.S.A.

AFTERBURNER EXHAUST TIPS •Afterburners are replacement lighted muffler tips with a three function red, run & brake, and amber turn signal function •Comes complete with plug-in wire harness •These lights have been heat tested to 450 degrees •Available for most 31/2” & 4” mufflers •Available in chrome or ceramic black •Patent pending •Sold in pairs NOTE: The 31/2” mufflers require an inside diameter of 3.660” NOTE: The 4” mufflers require an inside diameter of 3.8650” PART # DESCRIPTION FOR ALL MODELS WITH 8-PIN TAIL LIGHT PLUG 1802-0262 31/2” chrome 1802-0263 31/2” ceramic black 1802-0264 4” chrome 1802-0265 4” ceramic black FOR 11-13 FLHX/FLTRX WITH MOLEX CONNECTOR 1802-0266 31/2” chrome 1802-0267 31/2” ceramic black 1802-0268 4” chrome 1802-0269 4” ceramic black

SUG. RETAIL $299.95 299.95 299.95 299.95 299.95 299.95 299.95 299.95

PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT/FLHT OEM-STYLE MUFFLERS 1861-0767 Flame $149.95 1681-0768 Gun 149.95 1861-0769 Serrated 149.95 FOR RINEHART 3.5” DIA. MUFFLERS 1861-0795 Flame 149.95 1861-0796 Drilled 149.95 1861-0797 Slashed 149.95 FOR 4” VANCE & HINES MONSTER ROUND AND 4” RINEHART MUFFLERS 1861-0798 Flame 149.95 1861-0799 Drilled 149.95 1861-0800 Slashed 149.95 FOR VANCE & HINES TWIN SLASH ROUND MUFFLERS 1861-0801 Flame 149.95 1861-0802 Drilled 149.95 1861-0803 Slashed 149.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

WINDSHIELDS & FAIRINGS

1861-0731

TOURING

HEAT SHIELDS •Fit most aftermarket 13/4” staggered dual pipes (rigid or rubber mount) •Design allows installation of clean chrome pipe covers without cutouts for crossover tube •Sold in pairs PART # DS-203083

1861-0732

AUDIO & COMMUNICATION LUGGAGE

DESCRIPTION For 80” Evolution (except Dyna Glide); repl. OEM #s 65702-86, 65732-86

SUG. RETAIL $67.95

SEATS & SISSY BARS

SKULL HEAT SHIELDS •Available in chrome or satin black •9” long; includes two mounting clamps •Available for 21/4” and 13/4” outside diameter pipes •Sold each PART # FOR 21/4” PIPES 1861-0731 1861-0732 FOR 13/4” PIPES 1861-0782 1861-0783

FLAMING SKULL HEAT SHIELDS •Measure 10” in length •Chrome-plated finish •Universal fit for 2” – 21/4” exhaust pipes •Sold in pairs; clamps included •Made in the U.S.A. PART # 1861-0102

6

DESCRIPTION

EXHAUST SUG. RETAIL

Satin black Chrome

$23.95 23.95

FUEL/AIR SYSTEMS

Chrome Satin black

23.95 23.95

ENGINE TRANSMISSION & DRIVELINE

DESCRIPTION Flaming skull heat shields

SUG. RETAIL $79.95

GASKETS & SEALS RIGHT-SIDE CHROME HEAT SHIELD FOR DRESSERS •22” chrome lower right side heat shield fits 87-91 FLT, FLHT and FLHS models with stock exhaust systems •Complete with hardware PART # DS-203086

Before

DESCRIPTION For 87-91 FLT, FLHT and FLHS

SUG. RETAIL $30.95

DS-203072

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRIDGE THE GAP •Takes the blues away •Integrates easily and seamlessly to remove the gap between the stock heat shields •For use with stock head pipes and stock heat shields DESCRIPTION For 93-08 Dresser and Road King models

BRAKES SUG. RETAIL $39.95

TANKS & OIL FILTERS

DS-203073

DASHES & GAUGES

UNIVERSAL HEAT SHIELDS •Chrome universal heat shields available for 13/4”, 2” or 21/4” pipes •Include mounting clamps •Sold each •Made in the U.S.A.

UNIVERSAL HEAT SHIELDS •High-quality heat shields look great and keep you cool •Heat shields are a full 7” in length and come in three sizes to fit most pipes •Shields are triple chrome-plated and highly polished for a non-blueing look for years to come •Come complete with clamps for mounting •Sold each •Made in the U.S.A. PART # 990155 990165 990175

LIGHTING

After

DS-203071

PART # 1861-0150

ELECTRICAL

DESCRIPTION 13/4” heat shield 2” heat shield 21/4” heat shield

990165

SUG. RETAIL $19.95 19.95 19.95

PART # FOR 21/4” PIPES DS-203106 DS-203107 FOR 2” PIPES DS-203074 DS-203103 FOR 13/4” PIPES DS-203071 DS-203072 DS-203073

DESCRIPTION

FRAMES, SUSPENSION & FENDERS SUG. RETAIL

4” straight chrome 10” straight chrome

$29.95 59.95

10” straight chrome 4” straight chrome

47.95 29.95

10” straight chrome 12” straight chrome 18” straight chrome

47.95 47.95 59.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

469


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

OPTIONAL COMPONENTS FOR PRO PIPE HI-OUTPUT

1861-0616

•Optional quiet insert or heat shields are available as listed •Made in the U.S.A. PART # 1861-0606 1861-0613

1861-0617

1861-0606

DESCRIPTION SUG. RETAIL Opt. quiet insert (requires baffle mods) (ea.) $28.95 Opt. heat shields for PART #1800-1213, 1800-1018 (set) 169.95

PART # 1861-0616 1861-0617

DESCRIPTION Opt. heat shields for PART #1800-1016 (set) Opt. heat shields for PART #1800-1021 (set)

SUG. RETAIL $169.95 169.95

MUFFLER ADAPTER •Fits between the stock collector headpipe on 2010 FLHX/FLTRX with stock OEM 2-into-1 systems and the muffler •Allows the use of most 95-13 bagger mufflers with standard 13/4” inlet to be used with 2-in-1 H-D headpipe •Includes the swedged pipe, heat shield and mounting hardware •Heavy-duty 16-gauge steel; pipe is chrome and PART # heatshield is polished and chrome plated 1802-0119 •Made in the U.S.A.

DESCRIPTION Muffler adapter

SUG. RETAIL $50.95

1861-0049

FUEL/AIR SYSTEMS

HS-37

HS-38

HS-15X

HEAT SHIELDS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

470

•Chrome heat shields with no cutouts designed to fit Cycle Shack exhaust systems noted •Easily installed with supplied hose clamps •Sold each •Made in the U.S.A.

HS-14X 1861-0053

1861-0050

PART # DESCRIPTION SUG. RETAIL FITS MHD138 AND MHD338 SERIES MUFFLERS ON 00-06 FLSTF/FXSTD HS-37 Front muffler inlet heat shield $57.95 HS-38 Rear muffler inlet heat shield 72.95 PART # DESCRIPTION FITS CYCLE SHACK 13/4” AND 2” M-PIPES AND DRAG PIPES ON 84-06 FXST/FLST MODELS (EXC. FLSTS) HS-14X Front heat shield, 13/4” pipes (23”) HS-15X Rear heat shield, 13/4” pipes (231/2”) 1861-0049 Front heat shield, 13/4” pipes (14”) 1861-0050 Rear heat shield, 13/4” pipes (18”) 1861-0052 Front heat shield, 2” pipes 1861-0053 Rear heat shield, 2” pipes

1861-0046

HS-216

SUG. RETAIL

$77.95 79.95 50.95 52.95 68.95 67.95

1861-0052

HS-217

HS-17

SUG. RETAIL $59.95 59.95 66.95 66.95

1861-0048

UNIVERSAL HEAT SHIELDS •Chrome heat shield designed for 13/4” universal applications •Includes hose clamps •Sold each •Made in the U.S.A.

HS-16

PART # DESCRIPTION FITS PHD-102 AND 116 SERIES EXHAUST ON 86-03 XL HS-16 13/4” front heat shield HS-17 13/4” rear heat shield FITS PHD-202 AND 216 SERIES EXHAUST ON 86-03 XL HS-216 2” front heat shield HS-217 2” rear heat shield

REPLACEMENT COMPONENTS •For use with Vance & Hines’ exhaust systems PART # 1861-0046 1861-0048

DESCRIPTION Universal 7” heat shield Universal 11” heat shield

SUG. RETAIL $46.95 56.95

PART # V22533 1860-0547

DESCRIPTION Allen cap screw kit Dog Bone nut plate

V22533 SUG. RETAIL $1.95 9.95

1860-0547

EXHAUST BAFFLE FOR 13/4” O.D. EXHAUST PIPES •Fiberglass-wrapped steel construction •8” L ; 1.615” o.d./.840” i.d. •Sold each PART # 1861-0739

DESCRIPTION Baffle

SUG. RETAIL $11.95

DS-202011

•Steel baffle for 13/4” drag pipes •Sold each

HP-PLUS® DRAG PIPE BAFFLES •Dampen sound without impeding flow-through performance •All steel construction; baffles feature patented HP-Plus® design •Install easily on 13/4” or 2”, 16- or 18-gauge drag pipes •Baffles held by 1/4”-20 screws and locking nuts •Sold in pairs or each •Made in the U.S.A. PART # DS-202011 DS-202012 DS-202032

DESCRIPTION 13/4” (ea.) 13/4” (pr.) 2” (pr.)

REPLACEMENT BAFFLE FOR DRAG SPECIALTIES EXHAUSTS

SUG. RETAIL $26.95 49.95 49.95

PART # DS-202019

DESCRIPTION Baffle

REPLACEMENT END CAP O-RING FOR 2-INTO-1 CLASSIC SYSTEMS PART # V22897

DESCRIPTION Repl. end-cap O-ring (ea.)

SUG. RETAIL $7.95

V22897 SUG. RETAIL $7.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

WINDSHIELDS & FAIRINGS

SS-1S 1526

TOURING

DS-209091 1524

1861-0467

1861-0466

AUDIO & COMMUNICATION

SILENCER INSERTS

1861-0465

•Available in two sizes to fit either 13/4” or 2” pipe •Sold each •Made in the U.S.A. PART #

DESCRIPTION

1526

Silencer insert for all 2” drag pipes (except Python®) (ea.)

1524

Silencer insert for all 13/4” drag pipes (ea.)

16.95

SS-1S

Silencer for 13/4” slash-cut M-Pipes (ea.)

23.95

DS-209091

1861-0469

1861-0468

SUG. RETAIL

•High-quality steel performance baffles for 07-08 H-D Screamin’ Eagle™ mufflers •Improves the power and sound of your bike •Sold in pairs •Made in the U.S.A. NOTE: Not for use with 08 California catalyst equipped mufflers.

1

XP performance silencer for 2 /2” slash style mufflers

23.95

DESCRIPTION

SIZE

1861-0465

Fits OEM #80494-07, 80495-07, 80496-07, 80497-07, 80500-07, 80501-07

17/8” x 175/8”

SUG. RETAIL

1861-0466

Fits OEM #80502-07

17/8” x 13”

1861-0467

Fits OEM #64985-07A, 65467-05

2” x 261/4”

57.95

1861-0468

Fits OEM #80492-07, 80493-07, 80503-07

17/8” x 157/8”

39.95

1861-0469

Fits OEM#80490-07, 80491-07, 80498-07, 80499-07

2” x 263/8”

46.95

BAFFLES ONLY

1861-0623

Fits OEM #80674-08

17/8” x 221/4”

41.95

PART #

$41.95 41.95

DESCRIPTION

24” Baffles

1860-0245

REPLACEMENT/OPTIONAL BAFFLES •Available in standard replacement or Quiet Core (reduced dB cores) •Sold each EXHAUST PART #

REPL. BAFFLE PART #

QUIET CORE BAFFLE PART #

EXHAUST PART #

1800-0199

1861-0405

-

1800-0025

1861-0403

1861-0404

1800-0411

1861-0405

-

1800-0409

1861-0403

1861-0404

1800-0198

1861-0405

-

1800-0026

1861-0403

1861-0404

1800-0807

1861-0405

-

1800-0806

1861-0403

1861-0404

1800-0200

1861-0405

-

1800-0210

1861-0405

1861-0406

1800-0412

1861-0405

-

1800-0410

1861-0405

1861-0406

DRAGSTERS

REPL. BAFFLE PART #

QUIET CORE BAFFLE PART #

SUG. RETAIL

1860-0468

SPEEDSTER SHORTS

SPEEDSTER XTRA LONGS

SPEEDSTER SLASH-DOWNS

-

1861-0408

1800-0087

1861-0403

1861-0404

1800-0416

-

1861-0408

1800-0413

1861-0403

1861-0404

1800-0088

1861-0403

1861-0404

SPEEDSTER LONGS 1800-0027

1861-0407

1861-0408

1800-0808

1861-0403

1861-0404

1800-0415

1861-0407

1861-0408

1800-0212

1861-0403

1861-0404

1800-0028

1861-0407

1861-0408

1800-0414

1861-0403

1861-0404

1800-0809

1861-0407

1861-0408

1800-0761

1861-0405

1861-0406

EXHAUST PART #

REPL. BAFFLE PART #

EXHAUST PART #

REPL. BAFFLE PART #

REDUCED DB BAFFLE PART #

1

3 /2” SLIP-ONS 1801-0366

1861-0575

1.0” dia.

1860-0611

1.25” dia.

20.95

1860-0238

1.5” dia.

21.95

1860-0614

1.625” dia.

23.95

1860-0461

1.75” dia.

24.95

1860-0239

2.0” dia.

26.95

1860-0240

2.5” dia.

39.95

BAFFLE W/ PACKING

1860-0617

3.0” dia.

43.95

PART #

1.0” dia.

39.95

1860-0463

1.0” dia.

1860-0613

1.25” dia.

38.95

1860-0612

1.25” dia.

34.95

1860-0242

1.5” dia.

39.95

1860-0464

1.5” dia.

32.95

1860-0616

1.625” dia.

44.95

1860-0615

1.625” dia.

36.95

1860-0462

1.75” dia.

47.95

1860-0465

1.75” dia.

36.95

1860-0243

2.0” dia.

49.95

1860-0466

2.0” dia.

36.95

1860-0244

2.5” dia.

79.95

1860-0467

2.5” dia.

49.95

1860-0619

3.0” dia.

84.95

1860-0618

3.0” dia.

57.95

$32.95

1801-0362

1861-0576

1861-0579

1861-0576

1861-0579

1801-0363

1861-0576

1861-0579

1861-0576

1861-0579

1801-0364

1861-0576

1861-0579

1801-0361

1861-0576

1861-0579

1801-0365

1861-0577

1861-0580

PRICE LIST SUG. RETAIL

19.95

DS-202169

1860-0468

10” x 12” sheet

DS-202187

DS-202154

DS-200030

BRAKES

DS-210630

Repl. baffle 17/8” x 103/4”

1861-0404

Quiet Core baffle repl. 85/8” for 15” bodies

34.95

1861-0405

Repl. baffle 17/8” x 141/2”

29.95

PART #

DESCRIPTION

1861-0406

Quiet Core baffle repl. 123/8” for 191/2” bodies

34.95

DS-202154

13/4” o.d. x 11/2” i.d. for 17/8” pipes

3

Quiet Core baffle 16 /4” for 24” bodies

DS-200029

DS-210631

NOTE: May not fit other styles of exhaust systems because of various wall thicknesses used.

7

3

SUG. RETAIL $39.95

29.95

DS-202169

1 /8” o.d. x 1 /4” i.d. for 2” pipes

39.95

34.95

DS-200030

21/8” o.d. x 13/4” i.d. for 21/4” pipes

39.95

DS-202187

15/8” o.d. x 11/2” i.d. for 13/4” pipes

39.95 39.95

1861-0575

Repl. baffle 2” x 15”

34.95

1861-0576

Repl. baffle 2” x 161/2”

34.95

DS-200029

21/8” o.d. x 2” i.d. for 21/4” pipes

1861-0577

Repl. baffle 2” x 231/2”

34.95

DS-200492

23/8” o.d. x 13/4” i.d. for Samson Cannons, Long Cannons and Long Slashers for 02-06 V-Rod

39.95

1861-0578

Reduced dB baffle 13/4” x 151/2”

34.95

1861-0579

Reduced dB baffle 13/4” x 17”

34.95

DS-210630

21/8” o.d. x 13/4” i.d. x 37/8” baffle (ea.) for original Samson Big Guns

34.95

1861-0580

Reduced dB baffle 13/4” x 24”

34.95

DS-210631

21/8” o.d. x 2” i.d. x 4” baffle (ea.) for original Samson Big Guns

34.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

•Replacement 10” baffles for Samson exhaust systems •Sold each •Made in the U.S.A.

DESCRIPTION

Repl. baffle 1 /8” x 19”

CABLES

6.95

BAFFLES

1861-0403

7

HANDLEBARS, CONTROLS & MIRRORS

TANKS & OIL FILTERS

PART #

$29.95

LIGHTING

MUFFLER PACKING ONLY

6” x 10”

3 /2” SLIP-ONS (CONT)

1801-0359

1861-0408

SUG. RETAIL

REDUCED DB BAFFLE PART #

1801-0360

1861-0407

DESCRIPTION

1

1801-0578

GASKETS & SEALS ELECTRICAL

1860-0241

1860-0245

ENGINE

24” LONG BAFFLES

PERFORATED SHEET

1800-0195

1860-0463

1860-0237

48” LONG BAFFLES

FUEL/AIR SYSTEMS

TRANSMISSION & DRIVELINE

24” LONG BAFFLES $21.95

SEATS & SISSY BARS EXHAUST

•Ideal for replacing rusted-out exhaust baffles •Work great for custom fabrication as well •1.0”, 1.5”, 1.625”, 1.75” and 2.0” o.d. tubing is 22-gauge stainless steel •All have 1/8” diameter holes, 3/16” staggered centers, 33 holes per square inch and 40% open area •2.5” and 3.0” o.d. tubing is 16-gauge stainless steel; perforated sheet is 20-gauge stainless steel •Sold each •Made in the U.S.A.

PART #

LUGGAGE

$16.95

UNIVERSAL BAFFLES

BAFFLES FOR H-D SCREAMIN’ EAGLE™

6

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

471


SECTION

6

WINDSHIELDS & FAIRINGS 1861-0770

1861-0400

TOURING

TORQUE CONES AUDIO & COMMUNICATION

TORQUE CONES II

LUGGAGE

•Machined from stainless steel •Feature a better venturi effect than the stamped versions •Offer correct back pressure for more horsepower •Fit most stock and aftermarket 13/4” exhaust systems •Sold in pairs •Made in the U.S.A.

SEATS & SISSY BARS

PART # DS-200203

DESCRIPTION Torque Cones II

SUG. RETAIL $99.95

DS-203014

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

DS-203017

•Heavy-gauge steel construction •Sold each DESCRIPTION 13/4”, Dyna Glide only 13/4”, FXR only 2”, Dyna Glide only 2”, FXR only

SUG. RETAIL $11.95 10.95 10.95 10.95

GASKETS & SEALS

•Used to mount 17/8” diameter pipe extensions that have no brackets •Chrome finish •Sold each •Made in the U.S.A. PART # 1860-0234

DESCRIPTION For L85-12 FLT/FLHT models

SUG. RETAIL $42.95

CABLES

BRAKES TANKS & OIL FILTERS

PART # DESCRIPTION SUG. RETAIL DS-209970 For rubber-mount 84-94, 99 FXR and 91-05 Dyna Glide $16.95

PART # DS-203049 DS-203050 DS-203047 DS-203048 DS-203045 DS-203046

DS-203047

DESCRIPTION 13/4” body clamp 17/8” body clamp 13/4” end clamp 17/8” end clamp 13/4” center clamp 17/8” center clamp

•3” diameter chrome muffler clamp •Sold each •Made in the U.S.A. PART # 1860-0231

DESCRIPTION For 84-E85 5-speed FLT/FLHT models; repl. OEM #s 65837-79/65838-79

$27.95

Body clamp

Center clamp

SUG. RETAIL

End clamp

Double clamp

UNIVERSAL HEAVY-DUTY MOUNTING CLAMPS •Flat, heavy-gauge chrome clamps attach exhaust pipes to any frame-mounted bracket •Each clamp includes nut and bolt •Sold each •Made in the U.S.A.

FOOTRESTS & LICENSE PLATE FRAMES

COVERS, SECURITY & GENERAL

472

SUG. RETAIL $19.95 19.95 19.95 19.95 19.95 19.95

MUFFLER CLAMP

FRAMES, SUSPENSION & FENDERS

HARDWARE, CHEMICALS & TOOLS

DS-203045

DS-203049

DASHES & GAUGES

WHEELS & AXLES

SUG. RETAIL $34.95 51.95

•Relocates rear midway support clamp off rear pipe bend for improved mounting and appearance •Chrome kit includes two 13/4” pipe clamps (one each for the rear and the front) and one mounting hanger bracket •Fits Drag Specialties and other exhaust pipes

•Heavy-gauge flat steel clamps attach exhaust pipes to any frame-mounted bracket •Include nuts and bolts; available in chrome •Sold each •Made in the U.S.A.

PIPE HANGER

HANDLEBARS, CONTROLS & MIRRORS

DESCRIPTION Torque cones (pr.) Vortex torque cones (pr.)

UNIVERSAL HEAVY-DUTY EXHAUST CLAMPS

ELECTRICAL

LIGHTING

PART # 1861-0400 1861-0770

MIDWAY EXHAUST MOUNTING KIT

MIDWAY DRAG PIPE MOUNT CLAMPS PART # DS-203014 DS-203017 DS-203016 DS-203015

•High-temperature stainless steel cones have fully radiused edges for improved engine response, especially low-end torque •Generate correct levels of backpressure for increased horsepower •Fit most stock and aftermarket exhaust systems; fit 13/4”-2” i.d. exhaust pipes •New Vortex design increases back pressure, improving torque and horsepower •Smooths out the power curve for more consistent performance •Made in the U.S.A.

PIPE SIZE 13/4” 2” 21/2”

MUFFLER CLAMPS FOR DRESSERS •Chrome-plated clamps meet or exceed OEM specifications •Sold in pairs PART # DS-203018

DESCRIPTION For all L85-94 FLT; repl. OEM #65722-85 (pr.)

SUG. RETAIL $23.95

END CLAMP EC-200H EC-212H

PART # BC-200H CC-200H CC-212H

CENTER CLAMP CC-200H CC-212H SUG. RETAIL $11.95 10.95 11.95

BODY CLAMP BC-200H -

PART # EC-200H EC-212H DC-134

DOUBLE CLAMP DC-134 SUG. RETAIL $10.95 11.95 8.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS STAINLESS STEEL EXHAUST CLAMPS

1861-0679

STAINLESS STEEL T-BOLT CLAMPS

•Barrel and band design provide for superior clamping pressure •Low profile hex head adjusting bolt •Holds up to the repeated heating and cooling of the exhaust system •Available in 10 sizes •Sold individually •Made in the U.S.A. PART # 1861-0679 1861-0680 1861-0681 1861-0682 1861-0683

DESCRIPTION 1.44” - 1.58” clamp 1.56” - 1.70” clamp 1.69” - 1.87” clamp 1.81” - 1.99” clamp 1.94” - 2.12” clamp

SUG. RETAIL $11.95 11.95 11.95 11.95 11.95

PART # 1861-0684 1861-0685 1861-0686 1861-0687 1861-0688

DESCRIPTION 2.06” - 2.24” clamp 2.19” - 2.37” clamp 2.31” - 2.49” clamp 2.44” - 2.62” clamp 2.63” - 2.81” clamp

SUG. RETAIL $11.95 11.95 11.95 11.95 11.95

TOURING

•Keep it all together and clean with these heavy-gauge stainless steel clamps, the best in the business •Stainless steel construction resists heat and rust •Sold each •Made in the U.S.A. PART # 094-1500 094-1750 094-2000

SUG. RETAIL $16.95 20.95 20.95

DESCRIPTION 1.50” clamp 1.75” clamp 2” clamp

PART # 094-2250 094-2500 094-2750

DS-203060

AUDIO & COMMUNICATION

DESCRIPTION 2.25” clamp 2.50” clamp 2.75” clamp

SUG. RETAIL $17.95 20.95 16.95

LUGGAGE SEATS & SISSY BARS

DS-203070

EXHAUST DS-203080

EXHAUST OFFSET BRACKET •Chrome universal offset mounting bracket for exhaust pipes, mufflers, etc. •Sold individually •Made in the U.S.A. PART # OC-1

DESCRIPTION Offset bracket

DS-200155

EXHAUST HANGER BRACKETS

SUG. RETAIL $6.95

DS-200156

•Chromed 1/8” thick steel exhaust hangers •Available in assorted lengths and configurations •Sold individually PART # DS-203060 DS-203070 DS-203080

DESCRIPTION Hanger Hanger L-bend hanger

SIZE 3” L 43/4” L 1” x 33/4”

ENGINE SUG. RETAIL $6.95 6.95 6.95

ELECTRICAL

DS-209927

CHROME FXR EXHAUST MOUNTING BRACKETS

LIGHTING

•Replacement chromed steel exhaust brackets •Available for front and rear applications; may also be used on other models •Will work for custom frame applications and 90-92 FXD models •Rear bracket includes spacer (for 90-94 models only)

DS-209936

SUG. RETAIL $16.95 17.95

RUBBER MUFFLER MOUNTS •High-quality replacement component •Sold in pairs PART # 1861-0808

DESCRIPTION For 85-13 FLT/FLHT/FLHR/FLHX and FLTR models; repl. OEM #65724-85

TRANSMISSION & DRIVELINE GASKETS & SEALS

DS-209931

PART # DESCRIPTION FOR ALL 84-94, 99-00 FXR MODELS DS-200155 Front bracket; repl. OEM #65670-82B DS-200156 Rear bracket with spacer; repl. OEM #s 65675-87 and 65802-90

FUEL/AIR SYSTEMS

SUG. RETAIL $6.95

HANDLEBARS, CONTROLS & MIRRORS

DS-209935

REPLACEMENT MUFFLER SUPPORTS

CABLES

•1” o.d. steel tubing available in black powdercoat or highly polished chrome •Made in the U.S.A. PART # DESCRIPTION FOR 84-94 FXST AND FLST (EXCEPT FLSTF AND FLSTN), 84-86 FXWG AND 85 FXSB DS-209931 Black; repl. OEM #65459-84A FOR 87-94 FXR DS-209927 Chrome; repl. OEM #65674-87 FOR 95-13 DYNA GLIDE MODELS DS-209936 Chrome; repl. OEM #65674-95 1860-0391 Black FOR 91-94 DYNA GLIDE MODELS DS-209935 Black; repl. OEM #65674-90A

SUG. RETAIL

$73.95 46.95 43.95 36.95 36.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

MUFFLER BRACKET COVERS •Cover the welded muffler mounting brackets beneath the saddlebags with smooth chrome •Stamped steel construction with a chrome finish •Sold in pairs PART # 1861-0811

DESCRIPTION For 95-13 FLT/FLHT/FLHR/FLTR/FLHX w/ 4” round mufflers

SUG. RETAIL $39.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

473


SECTION

6

WINDSHIELDS & FAIRINGS

BK-74

BP-1

EXHAUST FLANGE KIT TOURING AUDIO & COMMUNICATION LUGGAGE

•Kit includes two chrome flanges with retaining clips •Retaining rings can be purchased separately

DS-203097

PART # DESCRIPTION FOR 84-13 BIG TWINS AND 86-13 XL DS-203097 Exhaust flange kit; repl. OEM #s 65328-83, 65325-83 1861-0458 Exhaust retaining clips (Genuine James); repl. OEM #65325-83A DS-203109 Exhaust retaining clips; repl. OEM #65325-83 (10-pk.)

SUG. RETAIL

PIPE ACCESSORIES

TB-2

•Made in the U.S.A. $25.95 1.95 (pr.) 2.95 (ea.)

PART # BP-1 BK-74 TB-2 TB-4

DESCRIPTION Brake pedal stop for 86-E87 XL 12” mounting straps for Harley 74” w/ mtg. studs (not for use w/ adjustable channel-mount pipes) (pr.) Two-piece T-bolt set Four-piece T-bolt set

SUG. RETAIL $6.95 19.95 5.95 11.95

SEATS & SISSY BARS EXHAUST STUDS EXHAUST FUEL/AIR SYSTEMS

•Sold in pack of six •Made in the U.S.A. PART # DS-197019

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

SUG. RETAIL $9.95

1861-0669

ENGINE TRANSMISSION & DRIVELINE

DESCRIPTION For all 84-13 Big Twin and 86-13 XL models; repl. OEM #16715-83

1861-0667

•Kit includes four zinc-plated studs and four chrome-plated flanged nuts; replaces OEM #16715-83 •Made in the U.S.A. PART # 2401-0126

DESCRIPTION For 84-13 Big Twin, 86-13 XL

SUG. RETAIL $13.95

EXHAUST PORT FASTENER KIT

1861-0666 1861-0668

EXHAUST HEAT WRAP KITS •Fiberglass cloth for extreme heat insulation (2,000°) •Perfect for wrapping pipes or mufflers •Keeps the heat inside •Comes in 1” or 2” wide x 25’ rolls •Includes four 14” ball bearing and barb locking stainless steel ties; replacement ties sold separately (PART #1861-0670) •Available in black or tan •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1861-0666 1” tan $31.95 1861-0667 1” black 31.95

EXHAUST PORT STUDS AND NUTS

PART # DESCRIPTION SUG. RETAIL 1861-0668 2” tan $44.95 1861-0669 2” black 44.95

•Never worry about re-tightening exhaust stud nuts again •Kit’s lock nuts fasten onto OEM exhaust studs without damaging studs or flange •No special tools needed for installation or removal •No thread locker required •Made in the U.S.A. PART # 1860-0388

SUG. RETAIL $12.95

MUFFLER PACKING •Heavy-duty 1,200°F muffler packing •11” x 16” x 1” thick •Can be split in half to allow for double use •Made in the U.S.A. PART # 1861-0696

CABLES

DESCRIPTION For 84-99 Evolution Big Twin models

DESCRIPTION Muffler packing

SUG. RETAIL $14.95

BRAKES V16106

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

474

FIBERGLASS PACKING

HEADER WRAP KIT •Kit features laser-cut Vance & Hines wrap clamps, black header wrap tape and locking stainless steel ties •Black, fiberglass composite wrap tape helps lock in the heat and reduces the radiant heat a realistic 50% •Kit includes 25’ roll of black wrap tape, 2 Vance & Hines Wrap Clamps and 6 locking stainless steel ties, enough to wrap two motorcycle headers thoroughly •Made in the U.S.A. IMPORTANT NOTICE: Use of this Vance & Hines Header Wrap Kit (PART #1861-0622) may void all warranties of the exhaust system that this Kit is applied to. Header Wrap functions to insulate heat generated by exhaust gases flowing through the head pipe, thereby raising the head pipe temperature beyond its intended operating temperature. Using heat wrap may compromise the integrity of the head pipe material, and may ultimately lead to cracks in the head pipe and will not be covered under warranty. Use of header wrap on an exhaust system is a modification to, and not a normal use of, an exhaust system. This notice is intended to inform the buyer to consider this possibility before using this product. PART # 1861-0622

DESCRIPTION Black exhaust wrap kit

SUG. RETAIL $69.95

•Available in several sizes as listed PART # V16106 V16107 V16108

V16107

DESCRIPTION Fiberglass repacking kit, 20” x 121/2” x 3/8” Fiberglass repacking kit, 12” x 9” x 3/8” Fiberglass repacking kit, 13” x 91/2” x 3/8”

SUG. RETAIL $14.95 14.95 14.95

UNIVERSAL CORE REPACK KITS •High-grade fiberglass matting •Kit PART #1860-0198 includes 9” x 16” fiberglass matting; enough material to repack two baffle cores •Kit PART #1860-0510 includes two 141/2” x 121/2” x 1/2” thick fiberglass mats and two 14” x 81/2” weaved thin mats •Made in the U.S.A. PART # 1860-0198 1860-0510

DESCRIPTION Repack kit (9” x 16”) Repack kit (141/2” x 121/2” and 14” x 81/2”)

SUG. RETAIL $32.95 30.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


SECTION

6

WINDSHIELDS & FAIRINGS 1861-0829

TOURING AUDIO & COMMUNICATION

1861-0828

1861-0817

EXHAUST PIPE WRAP

1861-0816

•For maximum fuel burn or cosmetic upgrade •Withstands direct heat up to 2000°F •Available in several widths and lengths; 1” x 50’ and 2” x 25’ sizes include four silver or black tie wraps as listed •Made in the U.S.A. PART #

DESCRIPTION

SUG. RETAIL

NATURAL

PART #

MATRIX HEAT SHIELD™ EXHAUST WRAPS

1861-0818

DESCRIPTION

•1” and 2” W rolls offer better heat resistance and a custom look you will not find with any other exhaust wrap •Made from crushed volcanic rock; 25% stronger than a typical fiberglass wrap •Weather and chemical resistant •Kit includes four stainless steel tie straps and detailed instructions •The Matrix Heat Shield Mat is a unique selfadhesive heat shield with a carbon-fiber finish

SUG. RETAIL

METALLIC

1861-0542

1” x 50’ w/ silver tie wraps

$49.95

1861-0771

1” x 50’ w/ silver tie wraps

$69.95

1861-0540

2” x 25’ w/ silver tie wraps

39.95

1861-0772

2” x 25’ w/ silver tie wraps

55.95

1861-0544

2” x 50’

53.95

1861-0773

2” x 50’

1861-0546

2” x 100’

96.95

1861-0774

2” x 100’

1861-0818

1” x 50’ w/ black tie wraps

56.95

1861-0778

1” x 50’ w/ silver tie wraps

71.95

1861-0817

2” x 25’ w/ black tie wraps

46.95

1861-0775

2” x 25’ w/ silver tie wraps

68.95

1861-0541

1” x 50’ w/ silver tie wraps

57.95

1861-0776

2” x 50’

1861-0539

2” x 25’ w/ silver tie wraps

45.95

1861-0777

2” x 100’

1861-0543

2” x 50’

1861-0545

2” x 100’

BLACK

78.95 149.95

SILVER

92.95

PART #

DESCRIPTION

1861-0828

Exhaust wrap, 1” x 50’

$54.95

61.95

1861-0829

Exhaust wrap, 2” x 25’

54.95

112.95

1861-0816

Mat, 12” x 24”

39.95

182.95

•Features a narrow design with a low profile head •Secures exhaust heat wraps or can be used any place extra clamping is needed in extreme temps or conditions PART # •Comes in two sizes •Sold in packs of four 1861-0672 1861-0673 •Made in the U.S.A.

1861-0673

PART #

FUEL/AIR SYSTEMS ENGINE

DESCRIPTION

SUG. RETAIL

PART #

GASKETS & SEALS ELECTRICAL

LIGHTING

DESCRIPTION

SUG. RETAIL $59.95

SUG. RETAIL

1861-0318

Black 2” x 25’

$62.95

1861-0730

Tan 1” x 50’

1.25”-2.25” diameter

$13.95

1861-0729

Black 1” x 50’

64.95

1861-0320

Exhaust wrap clamps

2.25”-3.25” diameter

13.95

1861-0319

Tan 2” x 25’

54.95

DESCRIPTION

EXHAUST

TRANSMISSION & DRIVELINE

•Wraps will increase power and reduce radiated exhaust heat •Kits includes 25’ L, 2” W or 50’ L, 1” W top-quality hightemperature wrap and four stainless-steel tie wraps for that finishing touch •Wraps can withstand up to 2,000° 1861-0318 •Available in black or tan •Replacement 4-pack exhaust wrap clamps are also available

1861-0672

SEATS & SISSY BARS

SUG. RETAIL

HIGH-TEMPERATURE EXHAUST WRAP KITS

STAINLESS STEEL WORM CLAMPS

LUGGAGE

19.95

HANDLEBARS, CONTROLS & MIRRORS CABLES

STAINLESS STEEL CABLE TIES

BRAKES

•Great for high-temperature areas •Ball bearing and barb fastening assembly •Locks tightly and will not slip •Secure any place an extra strength tie is needed •Comes in 8” or 14” lengths 1861-0671 •Sold in pack of five •Made in the U.S.A.

O2 SENSOR COVERS

•Chrome O2 sensor covers offer a unique, custom look •Designed to cover the plain 18mm OEM sensors •Install easily with included hardware •Sold in pairs •Made in the U.S.A. PART #

DESCRIPTION

1861-0451

For all OEM 18mm O2 sensors

SUG. RETAIL $69.95

PART #

DESCRIPTION

1861-0671

8”

SUG. RETAIL $9.95

TANKS & OIL FILTERS

1861-0670

PART #

DESCRIPTION

1861-0670

14”

SUG. RETAIL $11.95

STAINLESS STEEL TIE WRAPS •For securing exhaust pipe wrap and cosmetic upgrades •Anti-slip ball bearing locking device •Made in the U.S.A. PART #

DESCRIPTION

SUG. RETAIL

8 INCH, SILVER

PART #

1861-0819 DESCRIPTION

SUG. RETAIL

8 INCH, BLACK

1861-0547

4-pk.

1861-0549

50-pk.

$7.95

1861-0819

4-pk.

1861-0820

50-pk.

$7.95

1861-0823

4-pk.

1.95 (ea.)

1861-0824

50-pk.

14 INCH, BLACK

1861-0548

4-pk.

1861-0550

50-pk.

SUG. RETAIL

8 INCH, BLACK (LADDER STYLE)

1.95 (ea.)

14 INCH, SILVER

DESCRIPTION

$10.95 2.95 (ea.)

14 INCH, BLACK (LADDER STYLE)

8.95

1861-0821

4-pk.

1.95 (ea.)

1861-0822

50-pk.

8.95

1861-0825

4-pk.

2.95 (ea.)

1861-0826

50-pk.

13.95 2.95 (ea.)

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

1861-0823 PART #

DASHES & GAUGES

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

475


SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES

02 SENSOR BUNG ADAPTER KIT •Reduces 18mm bungs to 12mm for 10‑13model sensors •Includes extension wire to allow the front sensor to reach the new installation location •Kit includes two adapters, extension wire, wire connectors and instructions PART #

DESCRIPTION

1861‑0594

O2 sensor bung adapter kit

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

476

•6” extension harness •Reduces the 18mm O2 bungs on 09 models to 12mm O2 bungs on 10‑13 models •No cutting or splicing required •Made in the U.S.A. SUG. RETAIL $21.95

O2 SENSOR HARNESS EXTENSION AND BUNG ADAPTER

PART #

DESCRIPTION

1861‑0827

6” O2 extension harness

SUG. RETAIL $24.95

O2 SENSOR HARNESS EXTENSION AND BUNG ADAPTER

•Allows the use of exhaust systems with 18mm O2 sensor bungs to be used with late model bikes with 12mm O2 sensors •Reduces the 18mm O2 bungs to 12mm O2 bungs found on select 10‑13 models •Wiring harness comes pre‑assembled PART # DESCRIPTION with connector pins 1861‑0789 O2 extension harness •Made in the U.S.A.

SUG. RETAIL $24.95

•Now you can use 09 Dresser exhaust pipes on 10‑13 Dresser models •Reduce the 18mm O2 bungs on 09 models to 12mm O2 bungs found on 10‑13 models •Uses Namz simple Plug‑N‑Play wiring harness technology; no cutting PART # DESCRIPTION or splicing required 1861‑0608 O2 extension harness •Made in the U.S.A.

SUG. RETAIL $31.95

O2 SENSOR PLUG

•Works with any O2 sensor port fitting •Two sizes available: 18 x 1.5mm or 12 x 1.25mm •Sold each •Made in the U.S.A. PART #

DESCRIPTION

1861‑0496

18 x 1.5mm

SUG. RETAIL $4.95

O2 WELD‑IN SENSOR BUNGS

1861‑0496

PART #

DESCRIPTION

1861‑0562

12 x 1.25mm

SUG. RETAIL $4.95

O2 SENSOR PORT PLUGS •Allow non‑sensor HD models to run newer‑style exhaust systems equipped with O2 sensor ports •Simply scew it into non‑essential sensor ports •Sold in pairs •Made in the U.S.A.

1861‑0790

PART #

DESCRIPTION

SUG. RETAIL

PART #

DESCRIPTION

SUG. RETAIL

1861‑0790

18mm x 1.5

$11.95

1861‑0791

12mm x 1.25

$11.95

•Threaded outer and inner adapters reduce O2 sensor port from 18mm to 12mm allowing riders to use our exhaust pipes on select newer‑model motorcycles PART # DESCRIPTION •Sold in pairs O2 port bushing adaptors •Made in the U.S.A. 1861‑0784

1861‑0464

SUG. RETAIL $11.95

1861‑0607

O2 SENSOR PORT PLUG KIT •Kit allows select pre‑closed‑loop H‑D models to run newer style exhaust systems equipped with O2 sensor ports •Includes two zinc‑plated, plugs with sealing washers •Simply screw into nonessential sensor ports PART #

DESCRIPTION

1861‑0464 1861‑0607

Sensor port plug kit, 18mm x 1.5 Sensor port plug kit, 12mm x 1.25

SUG. RETAIL $16.95 16.95

WELD‑ON EGT BUNG •Allows installation of exhaust gas temperature meter •Sold each PART #

DESCRIPTION

1861‑0525

EGT bushing

1861‑0560

1861‑0694

•Used to install O2 sensors in exhaust systems •Weld‑in style •Available in 12 x 1.25mm or 18 x 1.5mm styles •Available in a standard straight style, or machined at a 45° angle •Sold in pairs •Made in the U.S.A. PART # STRAIGHT 1861‑0560 1861‑0561

DESCRIPTION

SUG. RETAIL

18mm x 1.5 12mm x 1.25

$14.95 14.95

PART # 45° ANGLE 1861‑0694 1861‑0695

DESCRIPTION

SUG. RETAIL

18mm x 1.5 12mm x 1.25

$24.95 24.95

7806‑1563

7806‑1564

WELD NUT FOR EXHAUST SENSOR AND HEX SOCKET PLUG •18 x 1.5mm weld nut for mounting wide‑band sensor on exhaust pipe •18 x 1.5mm hex socket plug mates with 18 x 1.5mm weld nut; allows removing oxygen sensor

O2 PORT BUSHING ADAPTER

TANKS & OIL FILTERS DASHES & GAUGES

O2 SENSOR HARNESS EXTENSION

SUG. RETAIL $21.95

PART #

DESCRIPTION

7806‑1563 7806‑1564 1861‑0831 1861‑0833 1861‑0832

18x1.5mm weld nut 18x1.5mm hex socket plug 18 x 1.5 mm stainless steel weld nut 18 x 1.5mm stainless steel hex socket plug 12 x 1.25mm hex socket plug

SUG, RETAIL $5.95 5.95 8.95 8.95 5.95

O2 SENSOR PORT PLUG KIT •Plugs SuperTrapp O2 sensor ports when using exhaust on earlier H‑D models that don’t require an O2 sensor •Kit includes two 18 x 1.5mm plugs •Made in the U.S.A. PART #

DESCRIPTION

1860‑0144

For all SuperTrapp exhaust w/ O2 sensor ports

PRICE $32.95

O2 SENSOR BUNG, PLUG AND WASHER •Available as a kit or individually •Weld‑in O2 sensor bung allows installation of 1861‑0728 O2 sensors in most exhaust systems; 18mm x 1.5 •O2 sensor bung plug works with 18mm O2 sensor bungs; 18mm x 1.5 •Aluminum bung plug washer fits any 18mm O2 sensor bung plug PART #

DESCRIPTION

1861‑0728 1861‑0523 1861‑0522 1860‑0545

O2 sensor bung, plug and washer kit Weld‑in O2 sensor bung O2 sensor bung plug Aluminum washer for O2 sensor plug

SUG. RETAIL $18.95 9.95 8.95 2.45

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel‑injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.


FUEL/AIR SYSTEMS

7

477


SECTION

7

WINDSHIELDS & FAIRINGS POWER VISION TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING

•The quickest and most powerful flash tuner on the market •The sophisticated, yet easy-to-use, 3.5” full-color touchscreen display mounts to handlebars with integrated Amps 4-hole threaded inserts; also mounts to most aftermarket accessory mounts that feature Amps 4-mounting options •The display’s interface cable plugs directly to the bike’s diagnostic connector •NO COMPUTER REQUIRED; simply select the tune and follow the on-screen prompts to flash the bike; tunes can also be edited directly from the Power Vision •Utilizes WinPV (Windows PC-based tuning application) •Stores up to six different tunes that can be flashed to the bike •Downloads and stores the stock calibration in case OEM restoration is needed; stock calibration can also be saved as an editable copy and used as a starting point •Dynojet preconfigured tunes are preloaded on the unit; Power Vision will identify the bike’s information and automatically sort hundred of applicable, dyno-proven tunes •Custom tunes can be loaded by a tuning shop or received via email and loaded onto the device •Displays all J1850 H-D vehicle data, wide-band air fuel ratio2 and various calculated channels (including MPG instant and trip MPG) •AutoTune Basic and Pro3 calculates and stores fuel trims to optimize fuel curve •Checks and clears diagnostic codes •Features adaptive trims and idle offset (with bike running) NOTE: The Power Vision “marries” to one individual ECM and may be used only on that bike for flashing the ECM. For this reason LeMans Corporation/ Drag Specialties does not take back Power Visions for any reason, used or not. All returns and or adjustments must be made directly with Dynojet Research. The Power Vision may be used on any bike to read and clean trouble codes. PART # 1020-1493 1020-1494

DESCRIPTION For all H-D models with Delphi ECM (except 11-13 Softails, 12-13 Dynas) For 11-13 FXST/FLST, 12-13 Dyna models

SUG. RETAIL $549.95 549.95

POWER COMMANDER V HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

478

•Fuel and timing control •Rev Xtend increases Rev limit •The Power Commander V can read the exact engine temp through the bike’s own ECM which allows the tuner to choose how much fuel to add during cold starts •Cold starting on heavily modified engines should now be much more controllable and easy to adjust •Software displays J1850 data from bike’s stock ECU •Reduced size from the PCIII USB •Easy to install •USB powered from computer; 9 volt adapter is no longer needed •Two position map switching function built in (switch not included) •Can add any SPST switch and toggle between two different fuel/ timing maps •Gear/speed input allows for map adjustment based on gear •Analog input allows user to install any 0-5 volt sensor •Build an adjustment table based on analog input such as boost or temperature •Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected •Ten throttle position columns •World’s largest dyno tested map database •Enhanced “accel pump” utility •Made in the U.S.A. PART # 1020-1877 1020-1121 1020-0841 1020-1868 1020-1867 1020-1878 1020-1555 1020-0842 1020-1869 1020-0940 1020-1879 1020-1557 1020-0844 1020-1870

DESCRIPTION SUG. RETAIL For 13 FLHT/FLHX/FLHR/FLTR $379.95 For 10-12 FLHT/FLHX/FLHR/FLTR 379.95 For 09 FLHT/FLHX/FLHR/FLTR 379.95 For 07-08 FLHT/FLHX/FLHR/FLTR 379.95 For 02-06 FLHT/FLHX/FLHR/FLTR 379.95 For 13 FXST/FLST 379.95 For 12 FXS/FLST (except 12 CVO models) 379.95 For 07-11 FXST/FLSTF/FXCW (except 11 CVO models) 379.95 For 01-06 FXST/FLST 379.95 For 09-11 FLSTC/FLSTN 379.95 For 13 V-Rod 379.95 For 12 V-Rod 379.95 For 08-11 V-Rod 379.95 For 02-07 V-Rod 379.95

PART # 1020-1880 1020-1556 1020-1123 1020-0843 1020-1871 1020-1881 1020-1118 1020-0839 1020-1882 1020-1119 1020-0840 1020-1120 1020-1108 1020-1186

DESCRIPTION For 13 Dyna Glide For 12 Dyna Glide For 10-11 Dyna Glide For 09 Dyna Glide For 04-05 Dyna Glide For 13 XL883 For 10-12 XL883 For 09 XL883 For 13 XL1200 For 10-12 XL1200 For 09 XL1200 For 10-12 XR1200 For 09 XR1200 For 08-09 1125 Buell

SUG. RETAIL $379.95 379.95 379.95 379.95 379.95 379.95 379.95 379.95 379.95 379.95 379.95 379.95 379.95 379.95

NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturers’ information.

All part numbers in BLUE are new for 2013.


SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

POWER COMMANDER V-PTI •Uses the same great features as the Power Commander V but are perfect for turbocharged or supercharged applications looking for precision, control and reliability •Modify your fuel curve based off a pressure (boost) table and/or temperature table •Pressure table provides 3D mapping capability based on boost vs. RPM •Temperature table provides 2D mapping capability with up to 50 points of adjustments •Comes with a Bosch 3 bar Map/Temp sensor PART # 1020-1816 1020-1817 1020-1818

DESCRIPTION For 09 FLHT/FLHX/FLHR/FLTR For 09-11 FXST/FLST For 09-11 V-Rod

SUG. RETAIL $449.95 449.95 449.95

EXHAUST FUEL/AIR SYSTEMS PART # 1020-1820 1020-1819

DESCRIPTION For 10-11 Dyna Glide For 10-12 XL1200

SUG. RETAIL $449.95 449.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

POWER COMMANDER V EX •Offers virtually the same tuning functionality and installation ease as the Power Commander V line •Meets and complies with all California Air Resources Board regulations •Works with Dynojet patented Tuning Link Software •Develop custom maps the same way as the PC-V version •Load “race only” Power Commander models into the PC-V EX •Automatically converts to the proper format PART # 1020-1883 1020-1499 1020-1873 1020-1872 1020-1884 1020-1788 1020-1500 1020-1874 1020-1885 1020-1790 1020-1502

DESCRIPTION For 13 FLHT/FLHX/FLHR/FLTR For 08-12 FLHT/FLHX/FLHR/FLTR For 07 FLHT/FLHX/FLHR/FLTR For 02-06 FLHT/FLHX/FLHR/FLTR For 13 FXST/FLST For 12 FXST/FLST For 07-11 FXST/FLST For 01-06 FXST/FLST For 13 V-Rod For 12 V-Rod For 02-12 V-Rod

SUG. RETAIL $379.95 379.95 379.95 379.95 379.95 379.95 379.95 379.95 379.95 379.95 379.95

FRAMES, SUSPENSION & FENDERS PART # 1020-1886 1020-1789 1020-1501 1020-1887 1020-1889 1020-1496 1020-1888 1020-1890 1020-1497 1020-1498

DESCRIPTION For 13 Dyna Glide For 12 Dyna Glide For 04-11 Dyna Glide For 13 XL883 For 10-12 XL883 For 09 XL883 For 13 XL1200 For 10-12 XL1200 For 09 XL1200 For 09-12 XR1200

SUG. RETAIL $379.95 379.95 379.95 379.95 379.95 379.95 379.95 379.95 379.95 379.95

NOTE: Some products may not be legal for sale or use on pollution-controlled vehicles, check your local laws and the manufacturers’ information.

All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

479


SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION 66116002

LUGGAGE 43811130

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

480

53409060

POWER COMMANDER III USB

•USB (Universal Serial Bus) port provides an instant, problem-free way to connect your Power Commander to a computer •Provides precise information for finetuning a fuel-injected motorcycle when changing an air filter, installing a new 1020-0014 exhaust system or doing additional engine performance modifications •Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock; Dynojet continuously maps new calibrations for each bike, which are available for downloading at their website (www.powercommander.com) •If you do not have a computer, you can change the settings with three touch buttons on the faceplate •OEM-style wiring connectors with improved harness protection are supplied; no wiring modifications required •Includes easy-to-follow instructions •Direct injector control technology manages the fuel curve •Features an expansion port for future add-on modules from Dynojet •Software is compatible with Windows 98se and newer; opens all maps with .djm extension •USB special cable and 9V battery power adapter are included •Adapters allow you to activate a Power Commander for changing or altering maps while disconnected from the bike •Professional adapter is ideal for service/parts department applications, consumer adapter is for limited use •Made in the U.S.A. POWER COMMANDER III USB PART # DESCRIPTION 1020-0533 For 08 Twin Cam Touring models 1020-0286 For 07 Twin Cam Touring models (w/ O2 eliminators) 1020-0001 For 02-06 Twin Cam Touring models 1020-0002 For 99-01 Twin Cam Touring models 1020-0005 For 97-98 Evolution Touring models 1020-0287 For 07-08 FXST/FLST (w/ O2 eliminators) 1020-0003 For 01-06 FXST/FLST 1020-0534 For 08 V-Rod

SUG. RETAIL $379.95 369.95 359.95 359.95 359.95 369.95 359.95 369.95

POWER ADAPTERS/CABLE PART # DESCRIPTION SUG. RETAIL 66116002 Repl. USB consumer 9V battery power adapter $14.95 53409060 USB dual volt 110V/220V professional power adapter 69.95 43811130 International plug adapter kit 12.95

PART # 1020-0291 1020-0004 1020-0288 1020-0218 1020-0006 1020-0290 1020-0289

DESCRIPTION For 07 V-Rod For 02-06 V-Rod For 07-08 Dyna Glide (w/ O2 eliminators) For 06 Dyna Glide w/ O2 eliminators For 04-05 Dyna Glide For 07-08 XL883 (w/ O2 eliminators) For 07-08 XL1200 (w/ O2 eliminators)

SUG. RETAIL $359.95 359.95 369.95 369.95 359.95 369.95 369.95

PART # DESCRIPTION DS-189144 Serial 110V professional power adapter 1020-0014 Repl. USB special cable

SUG. RETAIL $79.95 39.95

CALIFORNIA A.R.B. APPROVED POWER COMMANDER III USB-EX •Provides virtually the same tuning functionality as the original Power Commander III USB •Compatible with Tuning Link software •Creates full fuel adjustability, fuel and ignition mapping and custom maps •A built-in ignition module and ignition timing changes of up to +4/- 10° are also incorporated •Rev X-tend feature allows you to increase the stock rev limiter to 6200 rpm •Maps created for Power Commander III USB can be loaded and will automatically be converted to the proper format •Will work with any exhaust system •Increases torque and horsepower •Made in the U.S.A. NOTE: C.A.R.B. EO #D-619. PART # DESCRIPTION POWER COMMANDER USB-EX 1020-0751 For 08 Twin Cam Touring models 1020-0366 For 07 Twin Cam Touring models 1020-0372 For 02-06 Twin Cam Touring models 1020-0375 For 99-01 Twin Cam Touring models 1020-0378 For 97-98 Evolution models 1020-0367 For 07-08 FXST/FLST 1020-0373 For 01-06 FXST/FLST 1020-0752 For 08 V-Rod 1020-0371 For 07 V-Rod 1020-0376 For 02-06 V-Rod

SUG. RETAIL $379.95 369.95 359.95 359.95 359.95 369.95 359.95 369.95 359.95 359.95

PART # DESCRIPTION SUG. RETAIL POWER COMMANDER USB-EX (CONT) 1020-0368 For 07-08 Dyna Glide $369.95 1020-0374 For 06 Dyna Glide 369.95 1020-0377 For 04-05 Dyna Glide 359.95 1020-0370 For 07-08 XL883 369.95 1020-0369 For 07-08 XL1200 369.95 POWER ADAPTERS/CABLE 66116002 Repl. USB consumer 9V battery power adapter 14.95 53409060 USB dual volt 110V/220V professional power adapter 69.95 43811130 International plug adapter kit 12.95 1020-0014 Repl. USB special cable 39.95

NOTE: Some products may not be legal for sale or use on pollution-controlled vehicles, check your local laws and the manufacturers’ information.

All part numbers in BLUE are new for 2013.


SECTION

WINDSHIELDS & FAIRINGS

AUTOTUNE KIT FOR POWER VISION •Plugs directly into the Power Vision with a single cable •Includes 18mm O2 sensors and power connector that plugs into the bike’s harness •Provides real time AFR feedback to the Power Vision •Allows for semi-automated fuel corrections •User can specify what air/fuel ratio to make each rpm and throttle position % combination •Makes it possible to adjust cruise for best fuel economy as well as larger throttle openings for peak power •Base settings included for air/fuel ratios but are fully adjustable if need be •Made in the U.S.A.

TOURING AUDIO & COMMUNICATION LUGGAGE

NOTE: Because of possible clearance issues, some aftermarket exhaust systems may require modifications or relocation of their sensor bungs. PART # 1020-1532 1020-1533

7

DESCRIPTION For use with Power Vision PART #1020-1493 For use with Power Vision PART #1020-1493; includes weld-in 18mm bungs

SUG. RETAIL $420.95

PART # 1020-1534 1020-1535

429.95

DESCRIPTION For use with Power Vision PART #1020-1494 For use with Power Vision PART #1020-1494; includes weld-in 18mm bungs

SUG. RETAIL $420.95 429.95

SEATS & SISSY BARS EXHAUST

AUTO TUNE KIT FOR POWER COMMANDER V •Plugs directly into the Power Commander V with a single cable •Includes 18mm O2 sensors and power connector that plugs into the bike’s harness •Makes automatic fuel adjustments •User can specify what air/fuel ratio to make each rpm and throttle position % combination •Makes it possible to adjust cruise for best fuel economy as well as larger throttle openings for peak power •Base settings included for air/fuel ratios but are fully adjustable if need be •Made in the U.S.A.

FUEL/AIR SYSTEMS ENGINE

NOTE: Because of possible clearance issues, some aftermarket exhaust systems may require modifications or relocation of their sensor bungs. PART # 1020-11171 1020-0857 1020-1558 1020-15591 1

DESCRIPTION For all models with OEM 12mm O2 sensor (except 12-13 FXST/FLST, Dyna Glide models) For all models with 18mm O2 sensors (except 11 FXST/FLST models) For 11 FXS/FLST models w/ CAN-bus connector For 12-13 FXS/FLST, Dyna Glide models w/ CAN-bus connector

SUG. RETAIL $399.95 389.95 389.95 399.95

Requires installation of two 18mm sensor bungs (included).

MULTI-FUNCTION HUB ACCESSORY FOR POWER COMMANDER USB/USB-EX

1020-0326

•The Multi-Function Hub allows access to advanced expansion features of the Power Commander USB •Compatible with the LCD display, but the display is not required •Four separate functions can be accessed with the Multi-Function Hub •The Map Selection Switch (7/8” bar mount) allows the rider to switch between two different maps in the Power Commander. This allows a map for economy and a separate map for performance •The Gear Position/Speed function allows fuel and timing adjustments to be made depending on the gear selected and the position of the throttle, up to +/-50% fuel and +/-10 degrees of timing •Pressure input allows the fuel to be increased along with the boost level on turbocharged installations. The change of boost level does not require a re-mapping of the Power Commander •Relay outputs allow up to two warning lights or relays to be triggered independently to activate items such as shift lights, nitrous systems, or air shifter. The trigger can be by throttle percent, rpm, or both •Comes complete with installation instructions, wiring diagrams and CD with the required software updates •Made in the U.S.A. PART # 1020-0326 1020-0327

DESCRIPTION Multi-Function Hub and wiring harness for Map Selection Switch only Multi-Function Hub and wiring harness for Map Selection, Gear Position, Speed sensor, Pressure Input and two relay outputs

WIDE BAND 2 AIR/ FUEL RATIO MONITOR WITH COLOR LCD •The second generation of the Dynojet Wide Band Air/Fuel Ratio Monitor kit with digital technology •The WB2 technical features include 0-5V calibrated analog AFR output (connects to external data acquisition device), one wire RPM hookup, 0-5V analog input (TPS, MAF, boost, etc.), built-in sensor condition test, durable enclosure and wire sheathing for years of trouble-free operation and Dynojet CAN-Link communication allows for expansion options •WB2 comes with one Wide Band 2 module, color “touch screen” LCD, one Bosch LSU 4.2 Wide Band oxygen sensor, one oxygen sensor cable, one oxygen sensor weld bung, plug and copper washer, two Dynojet CAN-Link port seals, three wire T-taps, one terminal strip plug, two dual lock strips, one alcohol swab, three zip ties, two Dynojet decals and installation instructions •Includes LCD Display PART #1020-0924 PART # 1020-0858

DESCRIPTION Air/fuel ratio monitor

SUG. RETAIL $499.95

LIGHTING 1020-0327

SUG. RETAIL $179.95 219.95

BRAKES TANKS & OIL FILTERS

SUG. RETAIL $299.95 299.95

NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturers’ information.

All part numbers in BLUE are new for 2013.

HANDLEBARS, CONTROLS & MIRRORS CABLES

•Connects to any Power Commander USB via a “quick-disconnect” cable •Designed to remain on the bike at all times •Displays all available data from the 1020-0325 Power Commander when connected •Stores and switches between multiple maps in the on-board memory; maps can be sent to the Power Commander “on the fly” •Adjust maps using the controls on the display screen •Logs data for later analysis •Data storage for maps and logging by adding an SD Memory card; sold separately •Can be easily removed from the bike to be programmed with a desktop computer •USB programmable and upgradable •Uses an active matrix TFT LCD 240 x 320 16-bit screen •Made in the U.S.A. DESCRIPTION LCD for Power Commander III USB/USB-EX LCD for Power Commander V

GASKETS & SEALS ELECTRICAL

LCD ACCESSORY FOR POWER COMMANDER III USB/USB-EX AND POWER COMMANDER V

PART # 1020-0325 1020-0924

TRANSMISSION & DRIVELINE

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

481


SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

1020-1521

LUGGAGE SEATS & SISSY BARS EXHAUST 1020-0538

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

FUELPAK •Available in original version which is not legal for sale in CA or California A.R.B. approved version with all the same features as the original •Throttle position sensor-based system simplifies the process of fuel-injection tuning •Enables you to fine-tune the fuel mixture throughout the entire rpm range with the touch of a button •Increases power and improves throttle response •Very user friendly; plugs into the existing harness on the bike •No computer or software is required; simply punch in the values supplied with the Fuelpak •Values supplied are for use with Vance & Hines exhaust systems •Fuelpak will also work with other exhaust systems (contact V&H tech support for tuning information) •Includes all necessary mounting hardware NOTE: Not legal for sale or use on pollution-controlled vehicles (Original Fuelpak). NOTE: EO #D-632-1 (C.A.R.B. approved Fuelpak). NOTE: Requires the use of a high-performance air filter.

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

PART # DESCRIPTION LCD FUELPAK FOR 49 STATE USE 1020-1694 For 12-13 Softail, Dyna models (except 12 CVO Softail Convertible) 1020-1521 For 11-13 FLHT, FLHR, FLHX, FLTR models 1020-1728 For 12 V-Rod models ORIGINAL FUELPAK FOR 49 STATE USE 1020-0750 For 08-11 FXCW/C, 08-11 FLSTSB, 09 FXSTSSE 1020-0360 For 01-06 FXST, 01-11 FLST (except 07-11 FLSTF, 08-11 FLSTSB) 1020-0362 For 04-11 Dyna, 02-11 V-Rod and 09-13 XR1200 models 1020-0568 For 08-10 FLHT, FLHR, FLHX, FLTR models 1020-0361 For 02-07 FLHT, FLHR, FLHX, FLTR models 1020-0538 For 07-09 XL, 07-11 FXST/B/C, 07-11 FLSTF 1020-1136 For 10-13 XL

SUG. RETAIL

PART # CALIFORNIA A.R.B. APPROVED 1020-0823 1020-0818 1020-0820 1020-0822 1020-0819 1020-0821

SUG. RETAIL

DESCRIPTION For For For For For For

08-11 01-06 04-11 08-13 02-07 07-09

FXCW/C, 08-11 FLSTSB FXST, 01-11 FLST (except 07-11 FLSTF, 08-11 FLSTSB) Dyna, 02-11 V-Rod and 09-13 XR1200 models FLHT, FLHR, FLHX, FLTR models FLHT, FLHR, FLHX, FLTR models XL, 07-11 FXST/B/C, SSE, 07-11 FLSTF

$279.95 $279.95 $279.95 279.95 279.95 279.95 279.95 279.95 279.95 279.95

$279.95 279.95 279.95 279.95 279.95 279.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

482

THROTTLEPAK™ THROTTLE MANAGEMENT SYSTEM •Brings back the quick throttle response lost in throttle by wire (TBW) •One twist of the throttle and riders will notice the improved response and acceleration •Works on any bike’s configuration; stock, modified and any exhaust combination •Possibly the easiest performance mod ever; installs in minutes, simply plug into factory connectors •Made in the U.S.A. PART # 1020-1726

DESCRIPTION For all 08-12 H-D Throttle By Wire (TBW) models (Touring/CVO)

SUG. RETAIL 149.95

NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturers’ information.

All part numbers in BLUE are new for 2013.


SECTION

7

WINDSHIELDS & FAIRINGS

1020-1367

PRECISION™ ENGINE MANAGEMENT SYSTEM

TOURING

1020-1373

•Not like any other “self-tuning” controller, Revolution Performance’s Precision EMS™ is a true self-optimizing system; adjusts almost instantly with little additional adjustment •Simply set it up and ride; no laptop, no dyno and no downloads •Delivers instant results instead of “a little better with each ride”; while most systems require the system to “learn” more than two thousand fuel cells over a tremendous number of rides, the Precision EMS factors in air/fuel ratio, timing parameters, load and temperature ranges then adjusts to them instantly •Will benefit everyone, from the owner of a stock bike to a full-blown 135” •Takes full advantage of, and retains, the stock Delphi ECU •Maintains OEM safeguards and features, like ion-sensing knock protection •Only system with engine-load-based timing control •Utilizes wide band O2 sensors to constantly monitor and adjust •Includes Precision EMS controller, two wide-band O2 sensors, ECU shipment box and customer information sheet •Requires 18mm sensor bungs in the exhaust system for proper installation •Made in the U.S.A.

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

NOTE: ECU will be calibrated by Revolution Performance. Pre-paid, next-day-air package included. NOTE: Not legal for operation on public highways in the state of California. PART # 1020-1367 1020-13661 1020-1369 1020-13681 1020-15262 1020-13742 1020-1373

DESCRIPTION For 07-10 FLST, FXST For 01-06 FLST, FXST For 06-10 FXD, FXDWG For 01-05 FXD, FXDWG For 11 FLHT, FLHR, FLTR, FLHX For 10 FLHT, FLHR, FLTR, FLHX For 09 FLHT, FLHR, FLTR, FLHX

SUG. RETAIL $819.95 819.95 819.95 819.95 819.95 819.95 819.95

PART # 1020-1372 1020-1371 1020-13703 1 2 3

DESCRIPTION For 08 FLHT, FLHR, FLTR, FLHX For 07 FLHT, FLHR, FLTR, FLHX For 02-06 FLHT, FLHR, FLTR, FLHX

SUG. RETAIL $819.95 819.95 819.95

01-04 models require an upgrade to 05-up ECU. Requires an exhaust system with 18mm sensor bungs. 02-04 models require an upgrade to 05-up ECU.

1020-1828

RCX-CELERATOR CLOSED-LOOP FUEL MANAGEMENT SYSTEMS •Self-learning computer automatically adjusts the fuel/air mixture as you ride and compensates for changes in engine load conditions •Automatically recalibrates for specific modifications made to your motorcycle – exhaust pipes, pistons, head work, cams, air cleaner, etc. •Maximizes performance and engine efficiency while decreasing emissions and fuel consumption •Quick connect plugs for easy installation •No downloads or adjustments required •No dyno tuning required •Works in conjunction with factory and race tuner downloads •Quicker throttle response on TBW models •Made in the U.S.A. NOTE: C.A.R.B. OEM #D-655. NOTE: Standard models not for sale or use on California emissions-equipped motorcycles.

PART # DESCRIPTION SUG. RETAIL STANDARD 1020-1828 For 02-05 FLHT/FLHR/FLTR/FLHX, 01-05 FXST, 04-05 Dyna, 02-07 V-Rod with flat TPS connector, comes with one O2 sensor (3-pin) $449.95 1020-1829 For 06 Softail, 06 FLHT/FLHR/FLTR/FLHX with round TPS connector, comes with one O2 sensor (3-pin) 449.95 1020-1830 For 95-01 Magneti Marelli models with flat TPS connector, comes with one O2 sensor (3-pin) 449.95 1020-1831 For 07-11 Softail (except 11-13 CVO), 06-11 Dyna, 07 FLHT/FLHR/FLTR/FLHX, 10 CVO with round TPS connector, uses factory O2 sensors (3-pin) 399.95 1020-1832 For 08-09 FLHT/FLHR/FLTR/FLHX with oval TPS connector, uses factory O2 connector (6-pin) 399.95 1020-1833 For 07-13 XL with flat TPS connector, uses factory O2 connector (3-pin) 399.95 1020-1834 For 08-11 VRSC with flat TPS connector, uses factory O2 connector (3-pin) 399.95 1020-1835 For 10-13 FLHT/FLHR/FLTR/FLHX, 10 CVO FXST with oval TPS connector, uses factory O2 connector (6-pin) 399.95 1020-1836 For 12-13 Softail, 12-13 Dyna with round TPS connector, uses factory O2 connector (3-pin) 399.95 1020-1837 For 12-13 VRSC with flat TPS connector, uses factory O2 connector (3-pin) 399.95 CALIFORNIA 1020-1838 For 02-05 FLHT/FLHR/FLTR/FLHX, 01-05 FXST, 04-05 Dyna, 02-07 V-Rod with flat TPS connector, comes with one O2 sensor (3-pin) 449.95 1020-1839 For 06 Softail, 06 FLHT/FLHR/FLTR/FLHX with round TPS connector, comes with one O2 sensor (3-pin) 449.95 1020-1840 For 95-01 Magneti Marelli models with flat TPS connector, comes with one O2 sensor (3-pin) 449.95 1020-1841 For 07-11 Softail (except 11-13 CVO), 06-11 Dyna, 07 FLHT/FLHR/FLTR/FLHX, 10 CVO with round TPS connector, uses factory O2 sensors (3-pin) 399.95 1020-1842 For 08-09 FLHT/FLHR/FLTR/FLHX with oval TPS connector, uses factory O2 connector (6-pin) 399.95 1020-1843 For 07-13 XL with flat TPS connector, uses factory O2 connector (3-pin) 399.95 1020-1844 For 08-11 VRSC with flat TPS connector, uses factory O2 connector (3-pin) 399.95 1020-1845 For 10-13 FLHT/FLHR/FLTR/FLHX, 10 CVO FXST with oval TPS connector, uses factory O2 connector (6-pin) 399.95 1020-1846 For 12-13 Softail, 12-13 Dyna with round TPS connector, uses factory O2 connector (3-pin) 399.95 1020-1847 For EFI 12-13 VRSC (3 pin flat TPS connector) uses factory O2 sensors 399.95 REPLACEMENT PARTS 2130-0131 Repl. 18MM O2 sensor (ea.) 104.95 1861-0810 Repl. 18MM O2 sensor bung (ea.) 15.95

NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturers’ information.

All part numbers in BLUE are new for 2013.

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

483


SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL Fi2000 POWRPRO WITH CVT TECHNOLOGY LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

484

•Continuously Variable Tuning (CVT) is the key to the remarkable performance the Fi2000 PowrPro delivers •PowrPro uses electronic control technology that calculates the bike’s rate of acceleration by reading crankshaft rotation at the flywheel and changes in load just as a dynamometer measures acceleration at the rear wheel •PowrPro measures and adjusts fuel flow during acceleration to the injectors in microseconds for super-fast fuel tuning – continuously and automatically; net result: precise EFI tuning now happens in the real world in real time, nonstop, up to 80 times per second •New patented technology unlike any other system on the market •PowrPro tunes to precise air-fuel mixture to create maximum power 80 times per second (does not tune to a predetermined arbitrary AFR) •Creates that adjustment to maximum power on every squirt of the injector •It’s like having the best custom map writing, dyno operator tuning your fuel every time you crank the throttle •Tunes every gear, every roll on, every environmental change, every engine mod, lugging the engine, winding it out to redline: it reacts, verifies and adjusts when the bike is accelerating •Provides perfect acceleration fuel settings in any condition, with any exhaust system with any engine modifications •No matter what kind of new hardware you install on your bike – a new exhaust system, a freer-flowing air filter setup or even a big-bore hop-up kit with high-performance cams – PowrPro continues to analyze and tune your engine for peak performance •No external adjustments needed •No dyno needed •No additional components needed •Does not require wide band oxygen sensors NOTE: Not legal for operation on public highways in the state of California. PART # 1020-1358 1020-1553 1020-1361 1020-1354 1020-1352 1020-1798 1020-1796 1020-1353 1020-1362 1020-1359 1020-1355 1020-1351 1020-1349 1020-1551 1020-1357 1020-1364 1020-1356 1020-1363 1020-1360 1020-1350 1020-1571

DESCRIPTION For 08-11 FXCW/FXCWC For 12-13 FXS/FLS/FLST (except CVO) For 08-11 FXST/FLST (except CVO) For 07 FXST/FLST, 08-09 FLHT Police Model For 06 FXST/FLST For 12-13 FLST CVO For 10-11 FLST CVO For 01-05 FXST/FLST and 04-05 Dyna Glide For 10-13 FLHT, FLHR, FLTR, FLHX For 08-09 FLHT, FLHR, FLTR, FLHX For 07 FLHT, FLHR, FLTR, FLHX For 06 FLHT, FLHR, FLTR, FLHX For 95-05 FLHT, FLHR, FLTR, FLHX For 12-13 Dyna Glide For 08-11 Dyna Glide For 07 Dyna Glide For 06 Dyna Glide For 07-13 XL (except 12-13 XL1200V) For 08-10 VSCRA/B/R V-Rod For 02-07 V-Rod For 12-13 V-Rod

SUG. RETAIL $599.95 599.95 599.95 599.95 599.95 599.95 599.95 599.95 599.95 599.95 599.95 599.95 599.95 599.95 599.95 599.95 599.95 599.95 599.95 599.95 599.95

NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturers’ information.

All part numbers in BLUE are new for 2013.


SECTION

7

WINDSHIELDS & FAIRINGS Fi2000R PLUG-IN FUEL PROCESSOR

TOURING

•Proven Fi2000R comes with leads that snap directly into the bike’s injector bodies •Standard open-loop design for 06 Dyna and all 07-08 models can use exhaust systems that do or do not have O2 sensor bungs •More advanced tuning for modified bikes •Think of third tuning pot as an electronic main jet while thinking of the entire Fi2000R as a digital jet kit •Full range of fuel adjustment (0-10 settings) across all rpm ranges •Three easily identifiable lights: green – Fi2000R is adding more fuel to the air/fuel ratio approx. 14:1; green and yellow lights – these lights will be on in unison when throttle is open more quickly and air/fuel mixture is approx. 12.5:1; red – light comes on and stays on as long as the Fi2000R follows the fuel curve while adjusting to approx. 12.8:1 air/fuel ratio, which is where the engine will produce its best full-throttle power •Step-by-step instructions •Improves rideability by smoothing out the powerband and giving the bike more throttle response •Corrects lean air/fuel mixture problems; eliminates overheating, hesitation on acceleration or an uneven cruising rpm •Waterproof circuit board •No fuel map adjustments or computer downloads required

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

NOTE: Standard models not legal for operation on public highways in the state of California. NOTE: C.A.R.B. E.O. # D-633-1. PART # DESCRIPTION STANDARD 1020-0301 For 07-11 FXST/FLST and 06-11 Dyna Glide 1020-0544 For 08-11 FXCW/FXCWC 1020-0206 For 06 FXST/FLST 1020-0095 For 01-05 FXST/FLST and 04-05 Dyna Glide 1020-0561 For 08-09 FLHT, FLHR, FLTR, FLHX

SUG. RETAIL

$249.95 279.95 249.95 249.95 249.95

SUG. RETAIL

PART #

DESCRIPTION

STANDARD 1020-0304 1020-0204 1020-0093 1020-0306 1020-0626 1020-0094 1020-0341

(CONT) For 07 FLHT, FLHR, FLTR, FLHX $249.95 For 06 FLHT, FLHR, FLTR, FLHX 249.95 For 95-05 FLHT, FLHR, FLTR, FLHX 249.95 For 07-13 XL (except XL1200V 12-13) 249.95 For 08-13 V-Rod 249.95 For 02-07 V-Rod 249.95 34.95 Repl. O2 Sensor Eliminator kit

PART # DESCRIPTION CALIFORNIA 1020-0549 For 06 FXST/FLST 1020-0550 For 01-05 FXST/FLST and 04-05 Dyna Glide 1020-0548 For 06 FLHT, FLHR, FLTR, FLHX 1020-0546 For 95-05 FLHT, FLHR, FLTR, FLHX 1020-0547 For 02-07 V-Rod

SUG. RETAIL

TRANSMISSION & DRIVELINE

$249.95 249.95 249.95 249.95 249.95

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES Fi2000R O2 STANDARD MODEL FUEL PROCESSORS

•The Fi2000R O2 digital fuel processor is designed to work with all H-D exhaust systems (stock or aftermarket) equipped with oxygen sensors in place (closed-loop design) •Works much like a carburetor jet kit with adjustments similar to the air-mixture screw, the needle and clip positions and the main jet •The Fi2000R increases horsepower and torque by optimizing stock lean air/fuel mixtures (helps cool the engine temps as well) •Quick and simple installation with plug-and-ride technology with OEM-style connectors •No confusing computer downloads to install •No expensive dyno-testing required •Pre-configured from the factory for your make and model, but easy to adjust should your specific application need it •Improves overall rideability

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

NOTE: Standard models not legal for operation on public highways in the state of California. NOTE: C.A.R.B. E.O. # D-633-1. PART # DESCRIPTION STANDARD 1020-1554 For 12-13 FXS/FLS/FLST (except CVO) 1020-0938 For 08-11 FXST/FLST 1020-0303 For 07 FXST/FLST 1020-1799 For 12-13 FLST CVO 1020-1797 For 10-11 FLST CVO 1020-0545 For 08-11 FXCW/FXCWC 1020-1552 For 12-13 Dyna Glide 1020-0937 For 08-11 Dyna Glide 1020-0302 For 07 Dyna Glide

SUG. RETAIL

$279.95 279.95 279.95 279.95 279.95 279.95 279.95 279.95 279.95

PART #

DESCRIPTION

SUG. RETAIL

STANDARD (CONT) 1020-0314 For 06 Dyna Glide $279.95 1020-1144 For 10-13 FLHT, FLHR, FLTR, FLHX 279.95 1020-0562 For 08-09 FLHT, FLHR, FLTR, FLHX 279.95 1020-0305 For 07 FLHT, FLHR, FLTR, FLHX 279.95 1020-0307 For 07-13 XL 279.95 1020-0628 For 08-10 VSCR V-Rod 279.95 1020-1572 For 12-13 V-Rod 279.95 CALIFORNIA 1020-1550 For 12-13 FSX/FLS/FLST (except CVO) 279.95 1020-0553 For 07-11 FXST/FLST 279.95

PART #

DESCRIPTION

CALIFORNIA (CONT) 1020-0558 For 08-11 FXCW/FXCWC 1020-1549 For 12-13 Dyna Glide 1020-0552 For 07-11 Dyna Glide 1020-0556 For 06 Dyna Glide 1020-1145 For 10-13 FLHT, FLHR, FLTR, FLHX 1020-0564 For 08-09 FLHT, FLHR, FLTR, FLHX 1020-0555 For 07 FLHT, FLHR, FLTR, FLHX 1020-0560 For 07-13 XL 1020-0629 For 08-10 VSCRA/B/R V-Rod 1020-1573 For 12-13 V-Rod

SUG. RETAIL $279.95 279.95 279.95 279.95 279.95 279.95 279.95 279.95 279.95 279.95

NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturers’ information.

All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

485


SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1020-0836

THUNDERMAX ECM WITH INTEGRAL AUTO-TUNE SYSTEM •ThunderMax ECM with Auto-Tune module mounts conveniently in place of the factory ECM and plugs in to the existing harness •Utilizes wide band O2 sensors and works as a closed-loop control system to continuously self-adjust and properly tune the motorcycles air/fuel ratio for all riding conditions •Easy installation: replace the factory ECM, install new O2 sensors and harness, load the correct map for your bike, and ride •Includes ThunderMax ECM with Auto-Tune Module, plug-in harness and two wideband sensors, TMax software and communication USB cable, Quick-Start Easy Install and Comprehensive User’s Manual, technical support and free software and updates •Hundreds of maps available to download for your bike (based on model, engine size, exhaust system air cleaner, pistons, cams, etc.) – load the map of your choice and the integral auto-tune will do the rest •Improves throttle response, exhaust sound and driveability •Does not require dyno tuning •Rider can adjust idle speed, rev limit and speedometer calibration •Adjustable front and rear cylinder AFR maps, ignition timing (spark) maps, and startup maps •Works with all popular exhaust systems and is compatible with high-performance camshafts •Supports nitrous and supercharger applications •Software program allows live monitoring, recording and examination of diagnostic codes and datalogs including number of starts, engine temperature and rpm operation •New maps, software, firmware updates, map analysis and tech support available online at no charge •Made in the U.S.A.

1020-1850

NOTE: Because of possible clearance issues, some aftermarket exhaust systems may require modifications or relocation of their O2 sensor port bungs. NOTE: Legal in California only for racing vehicles which may never be used upon a highway. Some products may not be legal for sale or use on pollution-controlled vehicles; check your local laws and the manufacturer’s information. PART # 1020-08361 1020-1851 1020-1848 1020-1850 1020-1854

SUG. DESCRIPTION RETAIL For 08-13 FLHT, FLHR, FLHX and FLTR models $989.95 For 01-10 FXST/FLST, 02-07 FLHT/FLHR/FLTR/FLHX, 07-09 XL 899.95 For 11 FXS/FLST models 899.95 For 12-13 FXS/FLS/FLST/FXD/FXDWG models 899.95 For 08-10 FXCW/C, 04-11 FXD/FXDWG, 09 SE Softail, 10-13 XL models 919.95

PART # 1020-1852 1020-1853 1022-0039 1

1022-0039

SUG. RETAIL $919.95 919.95 117.95

DESCRIPTION For 08-12 XR1200 models For 02-13 V-Rod models Repl. oxygen sensor (ea.)

10-13 models will require the use of an exhaust system with 18mm sensor bungs or 10-13 head pipes must be modified to accept 18mm sensors.

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

THUNDERMAX NARROW BAND ECM FOR USE WITH BASSANI EXHAUST SYSTEMS •Loaded with custom-tuned maps specifically for Bassani exhaust systems •ECM with integral auto-tune system utilizes the factory O2 sensors and works as a closed-loop control system to continuously self-adjust and tune the motorcycle air/fuel ratio for all riding conditions •Simple installation – replace the factory ECM, select the proper pre-loaded map for your motorcycle, and ride •Improves power, torque and throttle response •Maintains excellent fuel economy •Does not require a computer – rider programming mode allows for map selection, idle speed adjustment, and speedometer calibration •Upgradeable to wide band version •Made in the U.S.A.

CABLES

BRAKES

NOTE: Legal for use in California only for racing vehicles which may never be used on a public highway.

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

486

PART # 1020-1866

DESCRIPTION For 08-13 FLHT/FLHR/FLTR/FLHX w/ 96” or 103” stock motor and Bassani exhaust

SUG. RETAIL $499.95

THUNDERMAX PIGTAIL HARNESS •Allows a second port for the communication cable connection to the ThunderMax •It is installed to the bike’s wiring harness at the 36-pin ECM connector (connection requires harness plug disassembly; two 1022-0059 terminated wires are inserted into two unused ports in the 36-pin connector, and a ground wire added) •Handy for motorcycle models with tight clearances around the ECM such as Dyna, Softail Rocker and 02-05 V-Rod models •Made in the U.S.A. NOTE: PART # 1022-0059 requires ThunderMax ECM with serial number 114000 or higher (produced beginning August 2008). Will not work on previous model ThunderMax PART #232661 TBW unit.

1020-1855

NOTE: PART # 1020-1855 requires ThunderMax ECM with Mini USB communication port (beginning November 2012). Will not work on previous model ThunderMax ECM or PART #1020-0836 (Touring TBW units). PART # 1022-0059

DESCRIPTION ThunderMax pigtail harness

SUG. RETAIL $18.95

PART # 1020-1885

DESCRIPTION ThunderMax Mini USB pigtail

SUG. RETAIL $18.95

NOTE: Some products may not be legal for sale or use on pollution controlled vehicles; check your local laws and the manufacturers’ information.

All part numbers in BLUE are new for 2013.


SECTION

7

WINDSHIELDS & FAIRINGS TOURING

1020-1849

THUNDERMAX 50 ECM •California ARB-legal complete replacement engine management system for Delphi®-equipped EFI model Harleys •Integral auto-tune system utilizes wide band O2 sensors and works as a closed-loop control system to continuously self-adjust and properly tune the motorcycle’s air/fuel ratio in all conditions •Easy installation – replace the factory ECM, install new O2 sensors and harness, and ride •Improves throttle response and increases horsepower and torque •Maintains excellent fuel economy •Includes Thundermax 50 ECM, plug-in harness, two wide band O2 sensors, software, communication USB cable, comprehensive user’s manual, full technical support and free software updates •Software allows examination of vehicle diagnostic codes •01-06 models will require the exhaust system to be equipped with or modified for O2 sensor bungs •Made in the U.S.A.

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1020-0837

EXHAUST

NOTE: Because of possible clearance issues, some aftermarket exhaust systems may require modifications or relocation of their O2 sensor port bungs.

FUEL/AIR SYSTEMS

NOTE: C.A.R.B. EO #s D-644, K-001, K-001-1, K-001-2. PART # 1020-1849 1020-1133 1020-1132 1020-0837

DESCRIPTION For 08 Touring models (96” EFI engine only) For 08-10 Big Twins (except Touring models) (96” EFI engine only) For 06 FXST and Touring models (88” EFI engine only) For 01-05 Softail EFI, 02-05 Touring models (88” EFI engine only)

SUG. RETAIL $989.95 899.95 899.95 899.95

ENGINE TRANSMISSION & DRIVELINE

THUNDERMAX OPEN LOOP •Open loop system allows you to take control of your EFI-equipped motorcycle •Maps, software and firmware updates available on line at no charge •Quickly find the best map for your application using SmartLink Map Filters •Includes ThunderMax ECM, SmartLink Software and communication cable, Quick-Start Easy Install and Comprehensive Users Manual, technical support and free software and updates •Select and install a matching base map and enjoy the efficiency of a balanced fuel curve for throttle response like you’ve never imagined •Alpha-N design unaffected by long duration camshafts •Replaces factory ECM, easy plug-in installation and set-up •Simple adjustable rev limit, idle, speedo calibration and decel pop control settings •Easily adjust fuel, ignition timing and cold start maps •Supports Nitrous and Supercharger applications •Versatile – plug and ride or live-tune a custom application •Logs engine starts, engine temperatures and total hours of operation time in 100 rpm increments •Read diagnostic codes through software or traditional methods •Record live data during riding or tuning sessions; choose replay speed for data analysis •ThunderMax includes SmartLink Software and cable for easy PC tuning, maps for popular engine combinations and Quick-Start Easy Install and Comprehensive User’s Manual •Expandable to “closed loop” with available ThunderMax Auto-Tune module •Made in the U.S.A.

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

NOTE: Legal in California only for racing vehicles which may never be used upon a highway. PART # 1020-0321

DESCRIPTION For 01-12 w/ Delphi EFI w/ cable throttle control (not for 08-12 Touring models or H-D FL Trikes)

SUG. RETAIL $485.95

BRAKES TANKS & OIL FILTERS

THUNDERMAX EFI AUTO-TUNE MODULE

DASHES & GAUGES

•Interfaces with the ThunderMax ECM to provide real-time data of the air/fuel ratio read by wide-band oxygen sensors installed in the exhaust system •Data is processed in milliseconds by the ThunderMax, which makes instant adjustments to maintain the front and rear cylinder air/fuel ratios specified by the SmartLink software, creating a self-tuning system •Modular design attaches directly to the ThunderMax ECM, eliminating any mounting hassles •Allows ThunderMax ECM owners (version 4.0 and higher) to add true wide-band closed-loop automatic tuning •System fits all 01-12 cable throttle control-EFI Harley-Davidson models equipped with ThunderMax (V.4+) ECM (PART #1020-0321) •Requires exhaust system fitted with bungs for oxygen sensors •Allows the user to program the desired air/fuel ratio for maximum power, maximum economy or anywhere in between •Targets specific AFRs, which adjust as you ride •Includes two wide-band oxygen sensors •No splicing required, system simply plugs into the factory wiring harness for total closed-loop functionality •Made in the U.S.A.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

NOTE: Because of possible clearance issues, some aftermarket exhaust systems may require modifications or relocation of their O2 sensor bungs. NOTE: Legal in California only for racing vehicles which may never be used upon a highway. PART # 1020-0322

DESCRIPTION Thundermax EFI Auto-Tune Module

SUG. RETAIL $413.95

NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturers’ information.

All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

487


SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING

TCFI GEN 4 AUTO-TUNE FUEL INJECTION CONTROLLER •Simultaneously auto-tune fuel curves for front and rear cylinders under actual riding conditions with WEGO IIID dual-channel wide-band oxygen sensor interface •Fully programmable plug-in replacement for 36-pin Delphi® controller with J1850 data bus •Robust alpha-N (throttle position and RPM based) fuel control eliminates problems with long-duration/highoverlap camshafts •Powerful Windows software for custom programming and data analysis •Full support for J1850 data bus used for communications with turn signal/security module (TSM/TSSM) and 1021-0007 instrument cluster on 04-13 models •Support for new 6th gear indicator on 07-13 models •Extended data logging and diagnostics; DataFLASH memory stores full 60 minutes of operating data at 10 samples/second. •Programmable user input and output •Billet aluminum housing with black anodized finish •Easy plug-in installation •All outputs protected against short circuits •Supports all sensors including theft/security module •Includes TCFI Gen 4 plug-in fuel injection controller, USB interface for PC link, software, WEGO IIID dual-channel wide-band exhaust gas oxygen sensor interface, two Bosch LSU 4.2 wide-band exhaust gas oxygen sensors, and two 18 x 1.5mm weld nuts for exhaust pipes) •Made in the U.S.A. NOTE: Not legal for sale or use on pollution-controlled vehicles. PART # DESCRIPTION AUTO-TUNE FUEL-INJECTION CONTROLLER 1021-0007 For 01-13 Twin Cam (except 08-13 Touring models 1020-1895 For 02-13 V-Rod using 36-pin Delphi system with J1850 data bus 1020-1896 For 07-13 Sportster using 36-pin Delphi system with J1850 data bus REPLACEMENT COMPONENTS FOR AUTO-TUNE FUEL-INJECTION CONTROLLERS 1022-0008 Repl. WEGO II oxygen sensor 7806-1563 18 x 1.5mm weld nut (for mounting sensor to exhaust pipe) (ea.) 1861-0831 18 x 1.5 mm stainless steel weld nut(for mounting sensor to exhaust pipe) (ea.) 7806-1564 18 x 1.5mm hex socket plug (for plugging 18 x 1.5 hole after tuning) (ea.) 1861-0833 18 x 1.5mm stainless steel hex socket plug (for plugging weld nut hole) 1861-0832 12 x 1.25mm hex socket plug (for plugging weld nut hole)

SUG. RETAIL $941.95 941.95 941.95 124.95 5.95 8.95 5.95 8.95 5.95

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TWIN TUNER FUEL-INJECTION CONTROLLER TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

488

•Allows easy adjustments to OEM Delphi fuel-injection systems to improve performance and match the requirements of performance parts •Mode and up/down push button switches make fuel trim adjustments in the rpm and throttle position ranges required by most applications; fuel trim value is displayed on a bright daylight-readable LED display •Advanced mode (using optional USB Interface PART #2101-0075 and PC Link Tuner software) allows precise fuel adjustments and independent adjustments to the front and rear cylinders •May be compatible with other controller maps •Easy plug-in installation and setup •Compact size – only 4” L x 2” W x .5” H •Compatible with Twin Scan II+ Tuning Aid – install the Twin Scan II+ and ride the bike, then copy the air/fuel ratio corrections calculated by the Twin Scan II+ into the PC Link Tuner software •Made in the U.S.A. NOTE: Not legal for sale or use on pollution-controlled vehicles. PART # 1020-1813 1020-0358 1020-0939 1020-0951 1020-0834

DESCRIPTION For 12-13 Softail and Dyna models w/ CAN data bus For 01-11 Big Twin w/ 36-pin Delphi EFI (except 11 Softail, 08-11 Touring models) and 08-09 Buell XB, 1125R w/ DDFI fuel-injection system For 08-13 FLHT, FLHR, FLTR and FLHX models w/ 73-pin Delphi EFI For 11 Softail, 07-13 XL w/ 36-pin Delphi EFI For 03-07 Buell w/ DDFI fuel-injection system

SUG. RETAIL $249.95 224.95 249.95 224.95 224.95

NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturers’ information.

All part numbers in BLUE are new for 2013.


SECTION

7

WINDSHIELDS & FAIRINGS TOURING

TWIN TUNER II •Twin Tuner II has all the features of the original Twin Tuner and includes ignition timing control capability •Easily adjusts the OEM Delphi fuel-injection and ignition to match the requirements of performance parts including highcompression pistons/heads, camshafts, free-flowing exhausts, and low-restriction air filters – add 30% or subtract 20% fuel and retard spark timing up to 10° •You can use the mode and up/down push button switches to make fuel trim adjustments in the rpm and throttle position ranges required by most applications. The fuel trim value is displayed on a bright daylight readable LED display 1020-0948 •The Twin Tuner also has an advanced mode, using the optional USB Interface and PC Link Tuner software to make precise fuel adjustments and allows independent adjustments to the front and rear cylinders •May be compatible with other controller maps •Easy plug-in installation and setup, with no splicing, cutting, crimping, or bulky interconnections •Compact size – only 4” L x 2” W x 1/2” H •Compatible with Twin Scan II+ Tuning Aid – install the Twin Scan II+ and ride the bike, then copy the air/fuel ratio corrections calculated by the Twin Scan II+ into the PC Link Tuner software

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

NOTE: Not legal for sale or use on pollution-controlled vehicles. PART # 1020-1814 1020-0948 1020-0949 1020-1328

DESCRIPTION For 12-13 Softail and Dyna models w/ CAN data bus For 01-11 Big Twin and 07-13 XL models w/ 36-pin Delphi EFI (except 08-11 Touring models) For 08-13 FLHT, FLHR, FLTR and FLHX models w/ 73-pin Delphi EFI For 02-13 V-Rod

SUG. RETAIL $305.95 258.95 305.95 258.95

ENGINE TRANSMISSION & DRIVELINE

TWIN TUNER EX •Allows easy adjustments to OEM Delphi fuel-injection systems to improve performance and match the requirements of performance parts •50-state street legal (A.R.B. E.O. D-641) – fuel adjustments with the Twin Tuner EX are only allowed above 60% throttle position or 5000 rpm •Mode and up/down pushbutton switches make fuel trim adjustments in the RPM and throttle position ranges required by most applications; fuel trim value is displayed on a bright daylight-readable LED display •Advanced mode (using optional USB Interface PART #2101-0075 and PC Link Tuner software) allows precise fuel adjustments and independent adjustments to the front and rear cylinders •Can use DynoJet Power Commander maps •Easy plug-in installation and setup •Compact size – only 4” L x 2” W x .5” H •Compatible with Twin Scan II+ Tuning Aid – install the Twin Scan II+ and ride the bike, then copy the air/fuel ratio corrections calculated by the Twin Scan II+ into the PC Link Tuner software •Made in the U.S.A. PART # 1020-0835

FUEL/AIR SYSTEMS

GASKETS & SEALS ELECTRICAL

LIGHTING

DESCRIPTION For 01-08 Big Twin w/ 36-pin Delphi EFI (except 08 Touring models) and 08-09 XB, 1125R Buell w/ DDFI fuel-injection system (Buell 1125R fitment not ARB certified)

SUG. RETAIL $224.95

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS

SLM FUEL-INJECTION MODULES •Self-learning modules compensate for changing loads, weather conditions and altitude •Automatically re-calibrates and optimizes for modifications such as pipes, air intake and cams •Allows for better engine efficiency resulting in improved performance •Direct plug-in connections for throttle position sensor, crank position sensor and O2 sensors on most models •Shock- and vibration-proof surface mount •PCB design allows for great durability •Reduces emissions and improves mileage •Costly dyno tuning sessions or downloading calibration files to a laptop are no longer needed •Simply plug it in and ride without having to re-flash the factory ECU

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

1020-1006

NOTE: Pre 07 applications include one O2 sensor and one O2 bung. 07-10 applications use factory installed O2 sensors. PART # FXST/FLST 1020-1003 1020-1004 1020-1006 FXD/FXDWG 1020-1003 1020-1004 1020-1006

DESCRIPTION For 01-04 FXST/FLST For 05-06 FXST/FLST For 07-09 FXST/FLST For 04 FXD/FXDWG For 05 FXD/FXDWG For 06-09 FXD/FXDWG

SUG. RETAIL $499.95 499.95 439.95 499.95 499.95 439.95

SUG. PART # DESCRIPTION RETAIL FLHR/FLTR/FLT/FLHT/FLHX 1020-1003 For 95-05 FLHR/FLTR/ FLT/FLHT $499.95 1020-1004 For 06 FLHR/FLTR/FLHT/FLHX 499.95 1020-1006 For 07 FLHR/FLTR/FLHT/FLHX 439.95 1020-1324 For 10 FLHR/FLTR/FLHT/FLHX 439.95 1020-1007 For 08-09 FLHR/FLTR/ FLHT/FLHX 439.95

PART # XL 1020-1005 V-ROD 1020-1005 1020-1003

DESCRIPTION For 07-09 XL For 08-09 V-Rod For 02-07 V-Rod

SUG. RETAIL $439.95 439.95 499.95

NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturers’ information.

All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

489


SECTION

7

WINDSHIELDS & FAIRINGS TOURING

TWIN TUNER II •Twin Tuner II has all the features of the original Twin Tuner and includes ignition timing control capability •Easily adjusts the OEM Delphi fuel-injection and ignition to match the requirements of performance parts including highcompression pistons/heads, camshafts, free-flowing exhausts, and low-restriction air filters – add 30% or subtract 20% fuel and retard spark timing up to 10° •You can use the mode and up/down push button switches to make fuel trim adjustments in the rpm and throttle position ranges required by most applications. The fuel trim value is displayed on a bright daylight readable LED display 1020-0948 •The Twin Tuner also has an advanced mode, using the optional USB Interface and PC Link Tuner software to make precise fuel adjustments and allows independent adjustments to the front and rear cylinders •May be compatible with other controller maps •Easy plug-in installation and setup, with no splicing, cutting, crimping, or bulky interconnections •Compact size – only 4” L x 2” W x 1/2” H •Compatible with Twin Scan II+ Tuning Aid – install the Twin Scan II+ and ride the bike, then copy the air/fuel ratio corrections calculated by the Twin Scan II+ into the PC Link Tuner software

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

NOTE: Not legal for sale or use on pollution-controlled vehicles. PART # 1020-1814 1020-0948 1020-0949 1020-1328

DESCRIPTION For 12-13 Softail and Dyna models w/ CAN data bus For 01-11 Big Twin and 07-13 XL models w/ 36-pin Delphi EFI (except 08-11 Touring models) For 08-13 FLHT, FLHR, FLTR and FLHX models w/ 73-pin Delphi EFI For 02-13 V-Rod

SUG. RETAIL $305.95 258.95 305.95 258.95

ENGINE TRANSMISSION & DRIVELINE

TWIN TUNER EX •Allows easy adjustments to OEM Delphi fuel-injection systems to improve performance and match the requirements of performance parts •50-state street legal (A.R.B. E.O. D-641) – fuel adjustments with the Twin Tuner EX are only allowed above 60% throttle position or 5000 rpm •Mode and up/down pushbutton switches make fuel trim adjustments in the RPM and throttle position ranges required by most applications; fuel trim value is displayed on a bright daylight-readable LED display •Advanced mode (using optional USB Interface PART #2101-0075 and PC Link Tuner software) allows precise fuel adjustments and independent adjustments to the front and rear cylinders •Can use DynoJet Power Commander maps •Easy plug-in installation and setup •Compact size – only 4” L x 2” W x .5” H •Compatible with Twin Scan II+ Tuning Aid – install the Twin Scan II+ and ride the bike, then copy the air/fuel ratio corrections calculated by the Twin Scan II+ into the PC Link Tuner software •Made in the U.S.A. PART # 1020-0835

FUEL/AIR SYSTEMS

GASKETS & SEALS ELECTRICAL

LIGHTING

DESCRIPTION For 01-08 Big Twin w/ 36-pin Delphi EFI (except 08 Touring models) and 08-09 XB, 1125R Buell w/ DDFI fuel-injection system (Buell 1125R fitment not ARB certified)

SUG. RETAIL $224.95

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS

SLM FUEL-INJECTION MODULES •Self-learning modules compensate for changing loads, weather conditions and altitude •Automatically re-calibrates and optimizes for modifications such as pipes, air intake and cams •Allows for better engine efficiency resulting in improved performance •Direct plug-in connections for throttle position sensor, crank position sensor and O2 sensors on most models •Shock- and vibration-proof surface mount •PCB design allows for great durability •Reduces emissions and improves mileage •Costly dyno tuning sessions or downloading calibration files to a laptop are no longer needed •Simply plug it in and ride without having to re-flash the factory ECU

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

1020-1006

NOTE: Pre 07 applications include one O2 sensor and one O2 bung. 07-10 applications use factory installed O2 sensors. PART # FXST/FLST 1020-1003 1020-1004 1020-1006 FXD/FXDWG 1020-1003 1020-1004 1020-1006

DESCRIPTION For 01-04 FXST/FLST For 05-06 FXST/FLST For 07-09 FXST/FLST For 04 FXD/FXDWG For 05 FXD/FXDWG For 06-09 FXD/FXDWG

SUG. RETAIL $499.95 499.95 439.95 499.95 499.95 439.95

SUG. PART # DESCRIPTION RETAIL FLHR/FLTR/FLT/FLHT/FLHX 1020-1003 For 95-05 FLHR/FLTR/ FLT/FLHT $499.95 1020-1004 For 06 FLHR/FLTR/FLHT/FLHX 499.95 1020-1006 For 07 FLHR/FLTR/FLHT/FLHX 439.95 1020-1324 For 10 FLHR/FLTR/FLHT/FLHX 439.95 1020-1007 For 08-09 FLHR/FLTR/ FLHT/FLHX 439.95

PART # XL 1020-1005 V-ROD 1020-1005 1020-1003

DESCRIPTION For 07-09 XL For 08-09 V-Rod For 02-07 V-Rod

SUG. RETAIL $439.95 439.95 499.95

NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturers’ information.

All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

489


SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

DYNA 2000-HDEFI FUEL AND IGNITION CONTROLLER •The control module plugs inline with the bike’s stock ECM •Uses original equipment style connectors, so no splicing or cutting of the harness is required •Significant horsepower can often be made by making timing adjustments as well as being able to correct detonation problems that may occur 2102-0252 •You can advance or retard your stock timing curve by +/- 100 using the included control center software •Allows for very specific fuel adjustment of the entire range of throttle openings and rpm combinations 2102-0257 •Adjustments can also be based on additional inputs such as cylinder head temp or gear position •The rev limiter is raised to 6200 RPM •Can be used with the DynaTune autotune kit (part #s 1020-1794, 1020-1795) for on the fly automatic fuel adjustment PART # 2102-0248 2102-0249 2102-0250 2102-0251 2102-0252 2102-0253

DESCRIPTION For 07-12 883 Sportster For 07-12 1200 Sportster For 09-12 XR1200 For 08-09 Touring models For 10-12 Touring models For 07-11 Softtail models

SUG. RETAIL $379.95 379.95 379.95 379.95 379.95 379.95

PART # 2102-0254 2102-0255 2102-0256 2102-0257 2102-0258 2102-0259

DESCRIPTION For 12-13 Softtail models For 09-11 Softtail Deluxe/Heritage For 06-11 Dyna models For 12-13 Dyna models For 08-11 V-rod For 12-13 V-rod

SUG. RETAIL $379.95 379.95 379.95 379.95 379.95 379.95

TRANSMISSION & DRIVELINE GASKETS & SEALS

1020-1794

DYNATEK DYNA TUNE AUTO TUNE KITS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

490

•By installing the included 18mm Wide Band O2 sensor in the exhaust the Dynatune kit monitors the fuel mixture •Sends information to Dynatek control module •Then automatically correcting it as you ride •Rider can feel the changes as they occur •Each map has preset air/fuel ratio target values •Allows the DynaTune to find the best overall settings •For more advanced users the air/fuel ratios are fully adjustable from the baseline •Each throttle opening/rpm combination is fully adjustable •Allows the riders fuel economy and peak output at larger throttle openings •Configure to run and make adjustments at all times or by using the “map switch port” on the Dynatek control module •Switch back and forth between the tuning mode and the base map settings •Also allows rider to configure the kit to wait until the bike is at a certain operating temperature before beginning to make adjustments PART # 1020-1794

DESCRIPTION For Harley-Davidson models w/ 18mm O2 sensors (except 11 Softails)

SUG. RETAIL

PART # 1020-1795

DESCRIPTION For 11 Softails

SUG. RETAIL 399.95

$399.95

FI CONTROLLER •Plug-in module offers three user-selectable base fuel curves designed to improve engine operation on fuel-injected models •Can be configured to suit a wide variety of modifications •Adjustments are made via three potentiometers that adjust the fuel curve in the proper ranges for the application •Fuel mixture can be enriched or leaned as required •Uses factory connectors for easy installation – there is no PC required for tuning or adjusting the fuel curves •No modifications to the stock ECU •Removing the FI controller returns vehicle to factory configuration •Made in the U.S.A.

1020-0192

NOTE: Not legal for sale or use on pollution-controlled vehicles. PART # 1020-0190 1020-0191 1020-0192 1020-1225 1020-1224 1020-0539 1020-0503 1020-0193

DESCRIPTION For 97-98 FLHT, FLHR, FLTR models For 99-01 FLHT, FLHR, FLTR models For 02-05 FLHT, FLHR, FLTR models For 09-11 FLHT, FLHR, FLHX, FLTR models For 08 FLHT, FLHR, FLHX, FLTR models For 07 FLHT, FLHR, FLHX, FLTR models For 06 FLHT, FLHR, FLHX, FLTR models For 01-05 FXST/FLST, 04-05 Dyna Glide

SUG. RETAIL $249.95 249.95 249.95 259.95 259.95 259.95 249.95 249.95

PART # 1020-0540 1020-0504 1020-0541 1020-0505 1020-0194 1020-0542 1020-0543

DESCRIPTION For 07-10 FXST/FLST For 06 FXST/FLST For 07-09 Dyna For 06 Dyna For 02-11 V-Rod models For 07-11 XL 883 For 07-11 XL 1200

SUG. RETAIL $259.95 249.95 259.95 258.95 249.95 259.95 259.95

NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturers’ information.

All part numbers in BLUE are new for 2013.


SECTION

7

WINDSHIELDS & FAIRINGS

BIG SHOT™ ADJUSTABLE FUEL INJECTION TUNER •A load-based fuel injection module; does not require splicing or modifications to motorcycle during installation 1020-0309 •Comes pre-loaded with base maps for different models which can then be fine tuned to individual riding style and bike •Laptops and dyno machines are not required during tuning to maximize performance •Utilizes the latest in load-based technology in fuel injection performance •Detects the exact amount of load on the engine at any rpm and any road speed; delivers the perfect amount of fuel to the engine for optimum performance •A superior design over fuel injection modules that work off throttle position NOTE: Not for sale in California. PART #

DESCRIPTION

1020-0310

For 06 FXST/FLST/FLT models

SUG. RETAIL $269.95

“CHEAP SHOT” FUEL TUNER •An economical solution to add needed fuel after 1020-0828 installing exhaust and air cleaner performance upgrades •Simple splice-in design saves money by eliminating costly plug-and-play connectors •Load-based technology senses load on the engine in any riding situation to provide optimal fuel to the engine •Adjusts like a carburetor •Installation instructions included •Made in the U.S.A. NOTE: Not for legal road use in California. PART #

DESCRIPTION

SUG. RETAIL

1020-0309

For 95-05 Big Twin models

269.95

1020-0829

For 06-09 Dyna, 07-09 Big Twin

1020-0770

For 08-09 FLT models

319.95

1020-0828

For 95-06 Big Twin (except 06 Dyna)

149.95

1020-0771

For 08 V-Rod models

319.95

1020-0831

For 08 V-Rod

149.95

1020-0312

For 02-07 V-Rod models

269.95

1020-0830

For 02-07 V-Rod

149.95

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

$149.95

FUEL MANAGEMENT CONTROLLERS •Simple to use and understand system provides easy air/fuel ratio adjustment •No computer or dyno required •Tuning capabilities superior to Alpha N type controllers •Easily adjusts for modifications – intake, exhaust, cams, etc. •Easy push-button operation •Load-based operation •Three basic zones of operation, similar to a carburetor – one zone sets the “pilot jet” for idle and cruise, another sets the “needle jet” for acceleration and a third zone sets the “main jet” for heavy loading and wide-open throttle •Plug and play installation •Uses OEM base code; does not scramble base code •Made in the U.S.A.

EXHAUST FUEL/AIR SYSTEMS ENGINE

1020-1086

TRANSMISSION & DRIVELINE

NOTE: Not legal for street use in California. PART #

DESCRIPTION

1020-1089

For 07-10 FXST/FLST models

1020-1088

For 06 FXST/FLST models

1020-1087

For 06-11 FXD/FXDWG models

1020-1090

For 06 FLHT, FLHR, FLHX, FLTR models

SUG. RETAIL

SUG. RETAIL

PART #

DESCRIPTION

1020-1091

For 07 FLHT, FLHR, FLHX, FLTR models

224.95

1020-1693

224.95

1020-1092

224.95

1020-1086

$224.95

SUG. RETAIL

PART #

DESCRIPTION

$224.95

1020-1093

For 02-07 V-Rod models

$224.95

For 10-12 FLHT, FLHR, FLHX, FLTR models

224.95

1020-1094

For 08-11 V-Rod models

224.95

For 08-09 FLHT, FLHR, FLHX, FLTR models

224.95

1020-1095

For 07-11 XL models

224.95

For 95-05 Big Twin models

224.95

1020-1096

For 99-07 Buell models

224.95

EFI POWER PROGRAMMER

HANDLEBARS, CONTROLS & MIRRORS

NOTE: Professional installation is recommended. DESCRIPTION

1020-1491

For 08-12 XR1200/1200X

ELECTRICAL

LIGHTING

•Get riding quickly with this fuel-management unit and select the mode that suits your style •Plugs into existing wiring using the stock connectors •Unlike most other fuel-injection programmers, this one is load-sensitive •No laptop or software required PART #

GASKETS & SEALS

SUG. RETAIL $359.95

CABLES 1020-1714

1020-1716

BRAKES 1020-1715

ADJUSTABLE O2 ENRICHMENT DEVICES

TANKS & OIL FILTERS

•Enrichment devices are intended to give riders the proper fuel mixture when adding performance mufflers, pipes and high flow air filter upgrades •Adjustable versions allow for external adjustment of the air-fuel ratio in closed-loop mode •Cheaper than other fuel management programmers or auto tuners •Reduces engine temperature between 20-30 degrees •Recommended for models with high-flow air intakes and exhaust •PART #1020-1715 includes AFR display •Made in the U.S.A. PART #

DESCRIPTION

1020-1716

For 06-11 Dyna, 07-11 Softail, 07-12 XL and 07-08 Touring models

SUG. RETAIL

1020-1715

For 06-11 Dyna, 07-11 Softail, 07-12 XL and 07-08 Touring models (adjustable)

$129.95

DESCRIPTION

1020-1717

For 10-13 Touring models, all 12-13 Softail, Dyna and V-Rod models

SUG. RETAIL

1020-1714

For all 08-09 XB9/XB12 Buell models w/ stock ECM

$129.95 84.95

195.95

•Reduce your engine’s temperature between 20 to 30 degrees •Installs in a few minutes; simply plug in between the oxygen sensors and the OEM wiring harness •Recommended for models with high flow air intakes and exhausts •Sold in pairs SUG. DESCRIPTION

1020-0796 For 06 Dyna and all 07-11 models (except 08-12 Touring and H-D FL Trikes) 1020-1151 For 07-08 Touring models and all 07-11 Big Twin Race (except 08-11 Touring and H-D FL Trikes)

1020-1717

PART #

O2 ENRICHMENT DEVICE

PART #

DASHES & GAUGES

PART #

$88.95

1020-1295 For 09 Touring models (all)

119.95

DESCRIPTION

SUG. RETAIL $119.95

1020-1296 For 10-13 Touring models and 12-13 Softail/Dyna models (all)

129.95

1020-1152 For 07-13 XL and 09-12 XR 1200

119.95

NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturers’ information.

All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

1020-0796

RETAIL

FRAMES, SUSPENSION & FENDERS

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

491


SECTION

7

WINDSHIELDS & FAIRINGS 1050-0151

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

1022-0082

SINGLE-BORE THROTTLE BODIES AND MANIFOLDS •Designed for riders seeking the greatest possible performance gains from their fuel-injected engines •For maximum tunability and performance gains an S&S Variable Fuel-Injection (VFI) module is recommended (sold separately), but any compatible, programmable module with enough capability and tuning range can be used •Components must be purchased separately to complete a Single-Bore EFI assembly •Made in the U.S.A. NOTE: Appropriate air cleaner kit must be order separately, see page 539

TRANSMISSION & DRIVELINE GASKETS & SEALS

PART # THROTTLE BODIES 1022-0029 1022-0081 1022-0082 MANIFOLDS 1050-0151

DESCRIPTION

SUG. RETAIL

52mm for stock 01-05 EFI Big Twin and aftermarket models (Delphi-style) 58mm for 01-05 EFI Big Twin and aftermarket models (Delphi-style) 58mm for 06-13 Big Twin and aftermarket models (Delphi-style) (except 08-13 Touring models) For 80”, 88”, 89”, 95”, 96”, 103” and 106” motors

$723.95 723.95 642.95 134.95

ELECTRICAL 1010-0015

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1050-0001

CABLES 1022-0037

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

492

1020-0027

THUNDERMAX® EFI THROTTLE BODIES AND MANIFOLDS •Replaces the OEM throttle body and manifold •Throttle bodies accept the OEM components, including injectors •Matching manifolds available separately for various cylinder lengths •High-flow air cleaner assemblies also available (sold separately) •Made in the U.S.A.

1010-0268

NOTE: Will also fit round port Screamin’ Eagle heads. NOTE: Legal in California only for racing vehicles which may never be used on a public highway. PART # DESCRIPTION SUG. RETAIL FOR 06-13 DELPHI-EQUIPPED TWIN CAM (EXCEPT 08-13 DRESSERS) 1022-0037 54mm throttle body/manifold assembly $689.95 1022-0038 60mm throttle body/manifold assembly 689.95 FOR 01-05 DELPHI-EQUIPPED TWIN CAM 1020-0027 50mm throttle body 419.95 1020-0028 54mm throttle body 419.95 1050-0001 Manifold for 4.937” length cylinders (stock length) 216.95

PART # DESCRIPTION SUG. RETAIL AIR CLEANER ASSEMBLIES FOR THUNDERMAX EFI THROTTLE BODIES 1010-0015 Accepts 8” round Evolution-style cover (cover not included) $239.95 1010-0268 Accepts OEM Twin Cam “football” cover (cover not included) 217.95

All part numbers in BLUE are new for 2013.


SECTION 1013-0003

7

WINDSHIELDS & FAIRINGS 1022-0043

WILD THINGS™ THROTTLE BODY AND MANIFOLD

TOURING

1022-0056 •Let that engine breathe •Huge, 57mm straight-bore throttle body and high-flow manifold gives big increases in horsepower •All stock components bolt on to throttle body without modification •Wide manifold throttle bodies are for use on engines with larger 0706-0036 (taller) cylinders than stock; these manifolds can be trimmed to length for custom applications •Uses the same air cleaner bolt pattern as stock •Allows use of stock cruise control 1022-0020 •Require the use of throttle body accessories when installing a Wild Things™ throttle body and manifold •Reshaped steel fuel supply tube for Softail models •Manifold spacer kit available for Dresser and Road King models •New split-flow high-volume fuel flow nozzles divide the fuel flow around the valve stem and guide •Directs fuel into the highest flow areas for the ultimate in fuel distribution •Flow enough fuel to feed even the nastiest street motors •Injectors can be used for stock 06-10 applications with 50mm throttle bodies •PART #1022-0044 requires purchasing Küryakyn intake flanges PART # 467 (available separately from Küryakyn) •Sold each •Engineered by Mike Roland SUG. PART # DESCRIPTION RETAIL FOR 06-13 TWIN CAM DELPHI FUEL-INJECTED MODELS (EXCEPT 08-13 FLHT/FLHR/FLTR/FLHX, H-D FL TRIKE AND 11-12 FLSTSE) 1022-0044 Wild Things™ throttle body for stock intake ports $599.95 FOR 01-05 TWIN CAM DELPHI FUEL-INJECTED MODELS 1013-0003 Wild Things™ throttle body and manifold for stock intake ports 549.95 FOR 01-05 TWIN CAM DELPHI FUEL-INJECTED MODELS (WIDE MANIFOLD) 1022-0078 Throttle body and wide manifold for stock intake ports 549.95 1022-0079 Throttle body and manifold for 1.80” intake ports 549.95

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

PART # DESCRIPTION WILD THINGS™ THROTTLE BODY ACCESSORIES 1022-0043 57mm high-flow fuel injectors for 06-13 Twin Cam w/ Wild Things™ throttle body, 06-13 Twin Cam w/ stock throttle body (except 08-13 FLHT/FLHR/FLTR/FLHX) or Screamin’ Eagle 50mm throttle bodies 1022-0056 Wild Things™ intake flanges for 99-05 Twin Cam w/ SE heads 1022-0080 Wild Things™ intake flanges for 06-13 Twin Cam w/ OEM or Screamin’ Eagle heads 0706-0036 Steel fuel supply tube for 01-05 Softail 1022-0020 Spacer kit for 02-05 Dresser and Road King models

SUG. RETAIL

ENGINE $99.95 83.95 72.95 11.95 41.95

ELLIPTICAL HIGH-TORQUE THROTTLE BODY AND MANIFOLD KITS

GASKETS & SEALS

LIGHTING

1022-0048

PART # DESCRIPTION SUG. RETAIL NOTE: 58mm and 62mm kits require the use of air cleaner kit PART #1010‑0741 (sold separately). FOR 06-10 DELPHI EFI TWIN CAM MODELS (EXCEPT 08-10 FLHT/FLHR/FLHX/FLTR AND H-D FL TRIKES) 1022-0050 1022-0048

TRANSMISSION & DRIVELINE

ELECTRICAL

•Replace OEM throttle body and manifold •Provide quicker throttle response through elliptical intake track design •Wider manifold to fit most taller engines •Compatible with all OEM electrical components, including throttle position sensors, air control motors and fuel injectors •Electronic components not included (MAP sensor, fuel rails and injectors) •Made in the U.S.A.

NOTE: Manifolds may require custom fitting based on intake port location.

FUEL/AIR SYSTEMS

62mm throttle body/manifold kit 58mm throttle body/manifold kit

$901.95 845.95

HANDLEBARS, CONTROLS & MIRRORS CABLES

MAXFLOW™ THROTTLE BODIES •Large plenum design maximizes mid- and high-rpm power (1.710” intake runners) 1022-0067 •Specifically designed for larger cubic inch motors that require substantial airflow •PART #1022-0066 features a 58mm throttle body and a 62mm manifold; PART #1022-0067 features a 55mm throttle body and a 58mm manifold •Fully machined and ported internally for unparalleled flow •Feature a natural finish with stainless steel shaft and spring •Equipped with a sealed double roller bearing for smooth throttle operation •Brass throttle blade and shaft resist deflection which helps maintain throttle position accuracy •Completely replaces OEM throttle PART # DESCRIPTION body and manifold; fully compatible 1022-0067 For 06-10 Twin Cam w/ Delphi EFI (except 08-10 FLHT, FLHR, FLHX, FLTR and H-D FL Trikes) with OEM components 1022-0066 For 01-05 Twin Cam w/ Delphi EFI •Made in the U.S.A.

BRAKES TANKS & OIL FILTERS

SUG. RETAIL $785.95 785.95

•Flow bench-tested and dyno-proven to deliver increased airflow, horsepower and torque (1.8” intake runners) •Fully machined and ported internally for unparalleled flow •Feature a natural finish with stainless steel shaft and spring 1022-0062 •Equipped with a sealed double roller bearing for smooth throttle operation •Brass throttle blade and shaft resist deflection which helps maintain throttle position accuracy •Completely replaces OEM throttle body and manifold; fully compatible with OEM components •Made in the U.S.A. SUG. RETAIL

$693.95 693.95

PART # DESCRIPTION FOR 01-05 TWIN CAM WITH DELPHI EFI 1022-0062 51mm 1022-0063 55mm

All part numbers in BLUE are new for 2013.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

BIG BORE THROTTLE BODIES

PART # DESCRIPTION FOR 06-10 TWIN CAM WITH DELPHI EFI (EXCEPT 08-10 FLHT, FLHR, FLHX, FLTR AND H-D FL TRIKES) 1022-0064 51mm 1022-0065 55mm

DASHES & GAUGES

WHEELS & AXLES

SUG. RETAIL $628.95 628.95

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

493


SECTION

7 1020-1478

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

1020-1395

LUGGAGE 1020-1479

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

OXYGEN SENSOR ELIMINATOR KITS AND ACTIVE INTAKE AND EXHAUST ELIMINATOR KIT •Oxygen Sensor Eliminator Kits allow air/fuel ratio changes for racing applications •Active Intake and Exhaust Eliminator Kit is used to avoid setting a diagnostic trouble code when installing some aftermarket air filters and exhaust that require the removal of original equipment active systems; for off-road racing use only •Made in the U.S.A. NOTE: Not legal for sale or use on pollution-controlled vehicles. PART # DESCRIPTION SUG. RETAIL OXYGEN SENSOR ELIMINATOR KITS 1020-1395 For 06-11 models (except 10-11 FLHR/FLHT/FLHX/ FLTR and H-D FL Trikes) $25.95 1020-1478 For 10-13 FLHR/FLHT/FLHX/FLTR and H-D FL Trikes 36.95 ACTIVE INTAKE AND EXHAUST ELIMINATOR KIT 1020-1479 For late-model European spec models w/ active intake and exhaust 28.95

GASKETS & SEALS

VFI CLOSED-LOOP SENSOR KIT •Owners of existing S&S engines equipped with a Delphi®-style VFI system can update to closed-loop operation by updating their module software via a download at the S&S website and then installing this closed-loop sensor kit •Kit includes two oxygen sensors, two weld-in exhaust bosses, an oxygen sensor wiring sub-harness, all required connectors and instructions •Made in the U.S.A. PART # 1020-0824

ELECTRICAL

DESCRITION For 01-06 Delphi-style VFI modules

SUG. RETAIL $279.95

LIGHTING 0706-0133

HANDLEBARS, CONTROLS & MIRRORS CABLES

WIDE-BAND BOSCH O2 SENSOR

•18mm sensor for use with air/fuel ratio meters PART # 1861-0521

DESCRIPTION Bosch O2 sensor

SUG. RETAIL $99.95

0706-0134

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

FUEL PRESSURE REGULATOR •62 psi Delphi regulator •Designed for greater fuel delivery •Engineered for a direct fit in most OEM fuel-injection applications •Made in the U.S.A. PART # 1009-0013

DESCRIPTION For 01-08 FXST/FLST, 02-07 FLT/FLHT/FLHR/FLTR

1009-0014

FUEL PUMP COMPONENTS •All parts are OEM replacement •Check OEM part # for the correct application •Sold each

FOOTRESTS & LICENSE PLATE FRAMES

“YELLOW BAND” FUEL INJECTORS

HARDWARE, CHEMICALS & TOOLS

•6.2 gps (grams per second) “yellow band” fuel injector •Recommended for “Big Inch” engines (115 hp or greater) •Sold in pairs •Made in the U.S.A.

COVERS, SECURITY & GENERAL

PART # 1022-0083

494

0706-0132

SUG. RETAIL $128.95

FRAMES, SUSPENSION & FENDERS

WHEELS & AXLES

0706-0131

DESCRIPTION For 01-05 FLST/FXST, 02-05 FLHT/FLHR/ FLHX/FLTR and 04-05 FXD

SUG. RETAIL $285.95

PART # DESCRIPTION HOUSING END CAP 0706-0134 For 02-07 FLT/FLHT/FLHR/FLTR models, 01-07 FXST/FLST models; repl. OEM #62165-01 FILTER END CAP 0706-0133 For 04-13 FXD models; repl. OEM #61013-04A FUEL PRESSURE REGULATOR 0706-0132 For 08-13 FLHT/FLTR/FLHR models, 04-13 FXD, FXDWG models, 08-13 FXST/FLST models; repl. OEM #61015-04A 0706-0131 For 02-07 FLT/FLHT/FLTR/FLHR models, 01-08 FXST/FLST models; repl. OEM #27408-01 REGULATOR HOUSING 1009-0014 For 01-07 Softail and 02-07 Touring models; repl. OEM #62373-01

All part numbers in BLUE are new for 2013.

SUG. RETAIL

$12.95 12.95

28.95 36.95

13.95


SECTION DS-289285

2103-1002

1022-0009

7

WINDSHIELDS & FAIRINGS TOURING

DS-289284

AUDIO & COMMUNICATION

DS-189001

DS-289143 DS-289144 1022-0004

LUGGAGE 1050-0039

ELECTRONIC FUEL-INJECTION COMPONENTS •All parts are OEM replacements •Check OEM parts manual for application and part number •Sold each PART # INJECTORS DS-289284

SEATS & SISSY BARS 1022-0022

1022-0021

DESCRIPTION

EXHAUST

SUG. RETAIL

For 01-05 FXST, FLST, 02-05 FLT and 04-05 Dyna models; repl. OEM #27609-01 (32 lb. per hour) (ea.) 1022-0009 For 01-05 FXST, FLST, 02-05 FLT and 04-05 Dyna models; repl. OEM #27609-01 (high flow, 47 lb. per hour) (ea.) FUEL REGULATORS 1009-0005 For 95-99; repl. OEM #27219-95 (350 kPa), (50 PSI) DS-289143 For 95-99; repl. OEM #27219-95 (300 kPa), (43 PSI) AIR TEMPERATURE SENSOR DS-289144 For 95-05; repl. OEM #27270-95 ENGINE TEMPERATURE SENSOR DS-289285 For 99-13; repl. OEM #32446-99 BAROMETRIC PRESSURE SWITCH DS-189001 For 95-98; repl. OEM #32424-95 (100 kPa)

$178.95

211.95 84.95 70.95 41.95 37.95 62.95

PART # DESCRIPTION SUG. RETAIL THROTTLE POSITION SENSORS 2103-1002 For 01-05 FXSTI, FLSTI, FXSTDI, 02-05 FLT, FLHT and 04-05 Dyna models; repl. OEM #27629-01 $65.95 1022-0021 For 06-13 Dyna, FXST, FLST and FLHT models; repl. OEM #27659-06 32.95 IDLE AIR CONTROL MODULES 1022-0004 For 01-05 FXSTI, FXSTSI, FXSTBI, FXSTDI, FLSTI, FLSTFI, 02-05 FLTRI, FLHRI, FLHRCI, FLHTCUI, 04-05 Dyna and 02-10 VRSC models; repl. OEM #27628-01 49.95 1022-0022 For 06-13 Dyna, FXST, FLST and 06-07 FLHT models; repl. OEM #27658-06 48.95 MAP SENSOR WITH SEAL 1050-0039 For 99-10 fuel-injected models (except 08-10 Dressers), 00-06 Big Twin Carb models and 04-06 XL; repl. OEM #32316-99 65.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

1050-0238 1050-0239

ELECTRICAL

1009-0012

LIGHTING 1022-0077

1022-0072

1009-0011

ELECTRONIC FUEL-INJECTION COMPONENTS •OEM replacement parts •See factory parts manual for part number and application •Sold each PART # INJECTORS 1022-0077

DESCRIPTION

HANDLEBARS, CONTROLS & MIRRORS 1022-0076 1022-0073 1022-0071 SUG. RETAIL

For 01-05 FXST, FLST, 02-05 FLT and 04-05 Dyna models; repl. OEM #27609-01 (32 lb. per hour) (ea.) 1022-0072 For 01-05 FXST, FLST, 02-05 FLT and 04-05 Dyna models; repl. OEM #27609-01 (high flow, 47 lb. per hour) (ea.) FUEL REGULATORS 1009-0011 For 95-99; repl. OEM #27219-95 (350 kPa) 1009-0012 For 95-99; repl. OEM #27219-95 (300 kPa) AIR TEMPERATURE SENSOR 1050-0238 For 95-05; repl. OEM #27270-95 ENGINE TEMPERATURE SENSOR 1050-0239 For 99-13; repl. OEM #32446-99 THROTTLE POSITION SENSORS 1022-0076 For 01-05 FXSTI, FLSTI, FXSTDI, 02-05 FLT, FLHT and 04-05 Dyna models; repl. OEM #27629-01

$184.95

218.95 88.95 72.95 42.95 38.95

1022-0074

1022-0075

PART # DESCRIPTION SUG. RETAIL THROTTLE POSITION SENSORS (CONT) 1022-0073 For 06-13 Dyna, FXST, FLST and FLHT models; repl. OEM #27659-06 $33.95 IDLE AIR CONTROL MODULES 1022-0071 For 01-05 FXSTI, FXSTSI, FXSTBI, FXSTDI, FLSTI, FLSTFI, 02-05 FLTRI, FLHRI, FLHRCI, FLHTCUI, 04-05 Dyna and 02-10 VRSC models; repl. OEM #27628-01 53.95 1022-0074 For 06-13 Dyna, FXST, FLST and 06-07 FLHT models; repl. OEM #27658-06 50.95 MAP SENSOR WITH SEAL 1022-0075 For 99-10 fuel-injected models (except 08-10 Dressers), 00-06 Big Twin Carb models and 04-06 XL; repl. OEM #32316-99 67.95

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

67.95

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS

INDUCTION MODULE ASSEMBLY O-RING KIT •Kit contains fuel fitting O-rings •Made in the U.S.A. PART # DS-174988

DESCRIPTION For 95-01 FLT, FLHT, FLHR fuel-injected models; repl. OEM #17043-95

SUG. RETAIL $16.95

All part numbers in BLUE are new for 2013.

COVERS, SECURITY & GENERAL

495


SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS DS-0452

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

496

1001-0018

DS-0419

SUPER E AND G SHORTY CARBURETOR KITS

DS-0448

•Each carb kit includes an S&S Super E or Super G gas carburetor with updated fuel delivery ports and idle screws, S&S teardrop air cleaner assembly, manifold (unless noted), mounting hardware, fuel line, clamps, overflow line, one extra intermediate jet and two main jets, VOES tubing (when applicable), installation and jetting instructions •Super E has a 17/8” throat at the butterfly and a 19/16” venturi and is recommended for use on Big Twin or Sportster engines up to 100-cubic-inch •Super G has a 21/16” throat at the butterfly and a 13/4” venturi and is recommended for use on 90-cubic-inch and larger high-performance and modified engines •21/16” G is not recommended for smaller, lower compression engines •If there is a doubt as to which carburetor to use, we suggest the 17/8” Super E •Carburetors only also available •Made in the U.S.A.

1002-0025

NOTE: S&S Super E & G carburetors require the use of a two-cable, pull open/pull close throttle assembly; S&S kits are compatible with stock cables except as noted. IMPORTANT NOTE: Recommended for racing only, this carburetor is not legal for use in California on motor vehicles operated on public highways or in other states where similar pollution laws may apply. User must determine the suitability of the product for his or her use and assumes all risk and liability in connection therewith. DESCRIPTION FOR BIG TWIN MODELS (INCLUDES MANIFOLD) For 99-05 Twin Cam For 92-99 Evolution Big Twin For 84-91 Evolution Big Twin FOR BIG TWIN MODELS (NO MANIFOLD) For 92-99 Evolution Big Twin For 84-91 Evolution Big Twin FOR XL MODELS (INCLUDES MANIFOLD) For 04-06 XL For 91-03 XL For 86-90 XL FOR BUELL MODELS (INCLUDES MANIFOLD) For 94-02 Buell models PART # REPLACEMENT COMPONENTS 1002-0025 1002-0026 1014-0133 1014-0040 1011-1721 DS-289404 DS-289405 1011-0324 1011-0325 1011-0326

17/8” SUPER E CARB KIT

SUG. RETAIL

21/16” SUPER G CARB KIT DS-0453 DS-0434 DS-0427

SUG. RETAIL

DS-0452 DS-0419 DS-0407

$579.95 579.95 579.95

DS-0442 DS-0440

509.95 509.95

-

-

1001-0018 DS-0409 DS-0408

579.95 579.95 579.95

-

-

DS-0448

579.95

-

DESCRIPTION

$599.95 599.95 599.95

SUG. RETAIL

Super E carburetor only Super G carburetor only Repl. S&S air cleaner cover for E & G carb, black Repl. Desperado-style air cover; repl. for all E & G carbs, chrome Repl. air cleaner element for E & G carbs Repl. S&S chrome air cleaner cover for E & G carbs Repl. air cleaner screws (10-pk.) Repl. breather hose for 93-06 Big Twin and 91-03 XL Breather screw seals (silicone-coated steel washer), .520” (10-pk.) Breather screw seals (silicone-coated steel washer), .380” (10-pk.)

$349.95 369.95 121.95 143.95 18.95 143.95 .95 (ea.) 6.95 1.25 (ea.) 1.25 (ea.)

CRUISE CONTROL ADAPTER KIT •Super Shorty carbs can easily be installed on motorcycles equipped with stock H-D cruise control •Includes all parts and instructions needed to complete installation •Made in the U.S.A. PART # 1003-0022

DESCRIPTION For 98-06 Big Twin

All part numbers in BLUE are new for 2013.

SUG. RETAIL $67.95


SECTION

7

WINDSHIELDS & FAIRINGS TOURING 42-18

AUDIO & COMMUNICATION 42-8

LUGGAGE TM42-6

SEATS & SISSY BARS TM42-6P

EXHAUST FUEL/AIR SYSTEMS

HSR42/45 “SMOOTHBORE” CARBURETOR KITS HSR42/45 CARBURETORS •For the high-performance engine builder who needs a carb for specific custom applications •Available in standard or highly-polished finishes NOTE: Choke cable included, except for the TM42-6, which uses stock choke cable from CV-type carb. NOTE: Airbox adapter HS42/001-K must be ordered separately. NOTE: Kits are not for use on models with cruise controls. PART # TM42-6 TM42-6P TM45-2 TM45-2P

DESCRIPTION 42mm carb, standard finish 42mm carb, polished finish 45mm carb, standard finish 45mm carb, polished finish

SUG. RETAIL $374.95 508.95 438.95 578.95

•Kits include the 42mm/45mm smoothbore carb in a natural finish •Easier, faster installation using stock CV throttle cables •Excellent throttle response, more power, improved acceleration and better gas mileage •Order fewer part numbers to cover more applications •Installation instructions and hardware included NOTE: Kits are not for use on models with cruise controls.

42MM/45MM EASY KITS •Accept the original H-D intake manifold, choke cable, air cleaner and throttle cables •Keep the stock look of your bike •Recommend the use of a high-flow air filter designed for the stock CV carb

42/45MM TOTAL KITS •Include performance intake manifold, rubber flange, 42mm or 45mm carb, high-flow K&N filter, air cleaner cover, breather kit and hardware •84-89 models require the use of 90-95 Big Twin-style cables EASY KITS PART # 42MM 42-18

42-7 42-10

42-11 45MM 1002-0030

48-2P

48-2X

TOTAL KITS PART # 42MM CARB 42-81 42-19 45MM CARB 45-2X1 45-4X 1

DESCRIPTION

SUG. RETAIL

For 99-06 Twin Cam and 90-99 Evolution Big Twin (not for use with stock air cleaner; requires a hi-perf air cleaner; use stock air cleaner cover; may be used with a Screamin’ Eagle air filter kit For 90-99 Evolution Big Twin (include chrome air cleaner cover For 94-03 XL 1200 models (include special backing plate and hardware; use stock oval air cleaner cover and high-flow filter) For 94-06 XL 1200 models and 94-02 Buell must use aftermarket air filter (include air filter adapter)

$398.95 459.95

438.95

459.95

SUG. RETAIL $598.95 658.95 678.95 678.95

84-89 models will require new-style intake manifold flanges and seals (sold separately).

HSR48 CARBURETORS

DESCRIPTION 48mm carb, polished finish 48mm carb, standard finish

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

•These high-performance carbs are ideal for realizing the maximum potential from custom and race engines •Available in standard or highly-polished finishes •Both use stock H-D cables and come with a flange •For race and custom applications only PART # 48-2P 48-2X

TRANSMISSION & DRIVELINE

459.95

For 99-06 Twin Cam and 90-99 Evolution Big Twin; requires use of Screamin’ Eagle manifold (use stock air cleaner cover; may be used with a Screamin’ Eagle air filter kit

DESCRIPTION KITS For 84-99 Evolution Big Twin (except 84-88 FLT) For 99-06 Twin Cam KITS For 84-99 Evolution Big Twin (except 84-88 FLT) For 99-06 Twin Cam

ENGINE

HARDWARE, CHEMICALS & TOOLS

REPLACEMENT FILTER ELEMENT •Replacement 21/2” or 3” filter element for HSR42/45/48 carburetor SUG. RETAIL $638.95 459.95

PART # HS42012-250 HS42/012-300

All part numbers in BLUE are new for 2013.

DESCRIPTION 21/2” filter element 3” filter element

SUG .RETAIL $84.95 84.95

COVERS, SECURITY & GENERAL

497


SECTION

7

WINDSHIELDS & FAIRINGS

TOP GUN 48MM SINGLE MIKUNI CARB KIT •A must for big-inch motors •Legendary Rivera performance in a 48mm Mikuni carburetormanifold kit •Includes Rivera’s all new proprietary super-flow intake manifold specifically designed for the large venturi 48mm Mikuni carburetor •Noticeably improves performance and gas mileage •Polished finish •Made in the U.S.A.

TOURING AUDIO & COMMUNICATION LUGGAGE

NOTE: Use bracket PART #1013-0034 for bikes with cruise control.

SEATS & SISSY BARS

PART # 1001-0011

EXHAUST

DESCRIPTION For 84-06 Evolution and Twin Cam motors

SUG. RETAIL

$1,129.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

DS-289079

GASKETS & SEALS ELECTRICAL

LIGHTING

DS-289078

BENDIX CARBURETORS

HANDLEBARS, CONTROLS & MIRRORS CABLES

•High-performance Bendix carburetors are easy bolt-on replacements that need no extra fitting or linkage connections •Most offer adjustable high-speed jets; all provide improved acceleration and easier, quicker starts •Made in the U.S.A.

DS-289086

38MM CARB KIT BRAKES TANKS & OIL FILTERS DASHES & GAUGES

•Kit includes carb, manifold adapter, hose clamps, throttle cable and two main jets, as well as a chrome front K&N air cleaner •Made in the U.S.A.

NOTE: All Bendix carbs may be used for other applications, provided correct cables are used. PART # DS-289078

NOTE: Does not include manifold. PART # DS-289086 0650-1125

DESCRIPTION 38mm Mikuni carb kit for 84-89 H-D Evo models w/ single-cable throttle control Repl. throttle cable

SUG. RETAIL $256.95 20.95

DS-289079

DESCRIPTION SUG. RETAIL 40mm high-performance carb w/ adjustable main jet, standard finish, for all 84-89 Big Twin and 86-87 XL w/ dual-throttle cable linkage (will not fit models w/ CV carbs unless choke hook-up is fabricated, intake manifold purchased and cables modified) $508.95 Choke cable accessory kit (required for installation of 40mm carb on 84-89 Big Twin, 86-87 XL Evolution) 74.95

FRAMES, SUSPENSION & FENDERS HIGH-PERFORMANCE CARB KIT

FOOTRESTS & LICENSE PLATE FRAMES

•Kit includes chrome-plated 40mm carburetor, fittings, adapters and installation instructions •Offers quicker starts and improved acceleration •Designed to fit stock manifold and OEM or performance air filters •Easy bolt-on installation SUG.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS

PART # 1002-0001

COVERS, SECURITY & GENERAL

498

All part numbers in BLUE are new for 2013.

DESCRIPTION For 90-99 Evolution Big Twin models

RETAIL

$407.95


SECTION

7

WINDSHIELDS & FAIRINGS 112903

DS-289111

TOURING

112923

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS DS-289113

ENGINE

1003-0312

TRANSMISSION & DRIVELINE

DS-289183

GASKETS & SEALS

160057

160491

1003-0196 112084

1003-0056

ELECTRICAL

1003-0195

LIGHTING 0706-0203 1050-0242

CARBURETOR REBUILD KITS AND REPLACEMENT COMPONENTS •Rebuild kits are available in master kits, body-only kits and accelerator pump kits •Replacement gaskets, O-rings and components are made from the highest-quality materials available •Made in the U.S.A.

HANDLEBARS, CONTROLS & MIRRORS CABLES

REBUILD KITS PART # 112923 112924 112903 DS-289111 DS-289112 1003-0312 DS-289113

DESCRIPTION Master rebuild kit Super E (body, accelerator pump, fasteners, springs, idle mixture screw, seat and needle assembly) Master rebuild kit Super G (body, accelerator pump, fasteners, springs, idle mixture screw, seat and needle assembly) Rebuild kit for Super B (body rebuild kit) Rebuild kit for Super E (body rebuild kit) Rebuild kit for Super G (body rebuild kit) Rebuild kit for Super E & G basic Accelerator pump rebuild kit for E & G (diaphragm, spring, check balls and springs, pushrod and required hardware)

SUG. RETAIL $80.95 80.95 40.95 40.95 40.95 31.95 19.95

REPLACEMENT COMPONENTS PART # DS-289934 DS-289935 DS-289933 112091 160491 160492 160057 160357 DS-289183 1003-0085 1003-0040 1003-0041 1003-0042 1003-0043 1003-0044 1003-0045 1003-0047 1003-0050

DESCRIPTION Manifold to carburetor O-ring, Super G (10-pk.) Manifold to carburetor O-ring, Super E (10-pk.) Bowl gasket, Super E and G (10-pk.) Bowl gasket, Super B and D (10-pk.) 1/4” Insulator block w/ O-ring Super E 1/4” Insulator block w/ O-ring Super G 1” Spacer block Super E 1” Spacer block Super G Gas line insulator Idle mixture screw (5-pk.) Idle mixture screw spring (10-pk.) Bowl plug (5-pk.) Needle: 17/8” E & 21/16” G (ea.) Bellows seal, accelerator pump (5-pk.) Diaphragm spring, accelerator pump (10-pk.) Accelerator pump diaphragm (ea.) Fast idle plunger/enrichener (ea.) Ball check spring (5-pk.)

SUG. RETAIL (EA.) $.95 .95 2.95 1.95 20.95 20.95 37.95 58.95 10.95 7.95 .95 2.95 11.95 3.95 .95 13.95 11.95 1.95

PART # DESCRIPTION 1003-0052 Fuel inlet/seat for 17/8” E & 21/16” G carb (uses needle 1003-0042) (ea.) 1003-0056 Breather conversion kit for Big Twin (converts early S&S air cleaners to new-style breather hardware) 112084 Enrichment device for B series carb (will work on Super E & G carbs when changing air cleaners) (ea.) 1003-0195 Throttle cable guide/bracket for use w/ CV (constant velocity) cables (ea.) 1003-0196 Throttle cable guide/bracket for use w/ butterfly cables (ea.) 1003-0192 Accelerator pump ejector nozzle O-ring (10-pk.) 1003-0194 Accelerator pump check ball only (10-pk.) 1003-0193 Accelerator pump cap O-ring (two required) (10-pk.) 1003-0188 Fuel bowl overflow hose; 24” long (5-pk.) 1050-0242 19” gas line w/ 90° end 0706-0203 Straight gas hose for use with the new S&S carbs with 90° fuel inlet 1003-0237 Inlet, 90° carb fuel swivel

All part numbers in BLUE are new for 2013.

SUG. RETAIL (EA.) $11.95 32.95 33.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

11.95 11.95 .95 .95 .95 3.95 5.95 5.95 22.95

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

499


SECTION

7

WINDSHIELDS & FAIRINGS TOURING 0657-0017

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

S&S ENRICHENER KNOB ASSEMBLY

DESCRIPTION Enrichener knob assembly

PART # 0657-0017 0657-0018 0657-0026 0657-0027

0657-0027

DESCRIPTION Gothic back cut cross Back cut knob Polished nautical star Brass nautical star

SUG. RETAIL $34.95 34.95 35.95 52.95

SUG. RETAIL $39.95

ALI BABA ENRICHENER KNOB

ENRICHENER LEVER COVER FOR S&S CARBS

•Beautifully chromed aluminum enrichener knob •Replaces the plastic knob on most carbs by using the included setscrew •Knob can also be screwed onto 10/32” threaded cables •Matching points cover, derby cover and head bolt covers available separately •Made in the U.S.A. PART # 0657-0001

0657-0026

•Replaces enrichener lever on S&S carbs •Perfect for custom applications •Made in the U.S.A.

•Replaces the stock S&S enrichener lever on E and G carbs when changing to a different style air cleaner assembly •Retains the stock plunger and spring •Set screw allows progressive enrichment •Kit includes a chrome knob and a brass plunger nut •Made in the U.S.A. PART # DS-289138

0657-0018

ENRICHENER KNOBS FOR S&S CARBS

DESCRIPTION Ali Baba enrichener knob

•Die-cast chrome-plated cover for the enrichener lever on S&S E and G carbs •Comes with its own wrench and two setscrews SUG. RETAIL $44.95

PART # DS-289038

DESCRIPTION Enrichener lever cover

SUG. RETAIL $10.95

0657-0003

LIGHTING 0657-0004

HANDLEBARS, CONTROLS & MIRRORS

S&S ENRICHENER LEVER COVER •This unique chrome cover fits over the enrichener lever on S&S E and G carbs •Comes with hex key and an extra stainless steel setscrew

0657-0005

CABLES ENRICHENERS WITH KNOBS BRAKES TANKS & OIL FILTERS DASHES & GAUGES

PART # FOR S&S SUPER E & G CARBS 0657-0003 0657-0004 0657-0005

FOOTRESTS & LICENSE PLATE FRAMES

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

500

DESCRIPTION Enrichener lever cover

SUG. RETAIL $10.95

1050-0184

DESCRIPTION

SUG. RETAIL

Spike Flat Top Power Flow

$49.95 49.95 49.95

1050-0262

1050-0226

FRAMES, SUSPENSION & FENDERS

WHEELS & AXLES

PART# DS-289039

•Enricheners with eye-catching chrome knobs •Replaces the existing enrichener when changing to a different style air cleaner •Available in several styles •Made in the U.S.A.

MIKUNI ENRICHENER CABLE RELOCATION BRACKET KITS AND KNOBS

1050-0227

•Kits include bracket, idle mixture screw knob and enrichener cable knob •CNC-machined billet aluminum components •Available in chrome and black finish •Made in the U.S.A.

ECON ENRICHENER CABLE RELOCATION BRACKETS •Relocates enrichener cable and knob out of the way •For use with stock enrichener cables and knobs •Made from stainless steel with ball-burnished finish •Made in the U.S.A. PART # 1050-0226 1050-0227

DESCRIPTION For all Mikuni HSR carbs For all Keihin CV carbs

NOTE: Must be used with Mikuni enrichener cable, Drag Specialties PART #990-662-002. SUG. RETAIL $31.95 31.95

PART # 1050-0183 1050-0262 1050-0184

DESCRIPTION Bracket kit w/ enrichener and idle knobs, chrome Bracket kit w/ enrichener and idle knobs, black Bracket kit w/ enrichener and idle knobs, raw

All part numbers in BLUE are new for 2013.

SUG. RETAIL $134.95 134.95 99.95


SECTION

7

WINDSHIELDS & FAIRINGS

1050-0208 Removal tool

TOURING FUEL INLET FITTING •Solid brass fitting •High flow design •Accepts 1/4” fuel line •For 84-06 Keihin butterfly and CV carburetors •Sold each PART # 1003-0257

DESCRIPTION Fuel inlet fitting; repl. OEM #27371-76A

SUG. RETAIL $5.95

AUDIO & COMMUNICATION

HI-FLOW FUEL NIPPLES •Flows more fuel than the stock OEM nipples •Includes removal tool •Made in the U.S.A.

1050-0123

PART # DESCRIPTION FOR ALL 76-06 KEIHIN CARBURETORS (BUTTERFLY AND CV) 1050-0123 Single outlet (brass) 1050-0208 Single outlet (stainless-steel)

SUG. RETAIL $42.95 47.95

-6AN FUEL LINE FITTING FOR S&S CARBS •Allows the use of -6AN fittings and fuel line for fuel supply •For all S&S Super E and G series carbs •Used with Pingel fuel valves PART #DS-390285 (22mm inlet) and PART #0705-0058 (3/8” NPT inlet); and The Guzzler® fuel valves PART #s 0705-0029/0705-0050 (22mm inlet) and PART #s 705-0028/0705-0056 (3/8” NPT inlet) PART # DESCRIPTION •Sold each DS-289141 -6AN fuel fitting •Made in the U.S.A.

LUGGAGE SEATS & SISSY BARS EXHAUST

SMOOTH CHROME CV CARB TOP COVER

FUEL/AIR SYSTEMS

•Smooth die-cast chrome cover replaces the OEM black plastic top cover •Installation is a snap; just remove the four OEM screws and bolt on the new cover with them SUG. RETAIL $36.95

ENGINE

PART # DESCRIPTION SUG. RETAIL DS-288801 For 88-06 Harley CV carb models; repl. OEM #27040-88 $15.95

1015-0094

1015-0096

TRANSMISSION & DRIVELINE GASKETS & SEALS

CV CARBURETOR TOP COVERS •Machined from 6061 T-6 billet aluminum, polished to a high luster and chrome-plated •Relocate choke cable for easier access •Made in the U.S.A. PART # DESCRIPTION FOR 88-06 CV40/44 CARBURETORS ON BIG TWIN, XL AND BUELL 1015-0094 Smooth w/ logo and choke cable bracket 1015-0096 Smooth w/ choke cable bracket

ELECTRICAL SUG. RETAIL

LIGHTING

$59.95 59.95

HANDLEBARS, CONTROLS & MIRRORS

KHS-028

CABLES

BRAKES FLOAT BOWL SPEED SCREW KITS

KHS-029

•Highly polished chrome cover gives a unique custom look •Available with or without embossed Mikuni logo DESCRIPTION Cover w/ Mikuni logo Cover w/o Mikuni logo

SUG. RETAIL $28.95 28.95

PART # 1050-0158 1050-0160

DESCRIPTION For CV/HSR carbs For S&S E&G carbs

DS-190697

CARBURETOR SOCKET-HEAD BOLT KITS •Replace the stock screws with strong chrome socket-head bolts •For use on CV carburetors and S&S carburetors •Made in the U.S.A. PART # DS-190129 DS-190695 DS-190697

TANKS & OIL FILTERS

•Electropolished stainless steel for a great custom look •Will not corrode in extreme climates •Longer and stronger than the stock screws, makes them easier to handle; will not round off •5/16” hex head design eases bowl removal and jet changing •Made in the U.S.A.

MIKUNI CHROME CARB TOP COVER

PART # KHS-029 KHS-028

1050-0158

DESCRIPTION SUG. RETAIL For CV carburetor on 90-06 Big Twin and 88-03 XL models $28.95 For top cover only on 88-06 CV carburetors 11.95 For S&S E and G carburetor body and air cleaner 38.95

All part numbers in BLUE are new for 2013.

DS-190129

DASHES & GAUGES

SUG. RETAIL $34.95 34.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

501


SECTION

7 990‑605‑065

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

HSR48 MAIN JET EXTENSION KIT

REPLACEMENT PARTS FOR HSR 42/45 CARB KITS

•Increases amount of fuel to float bowl •Completely submerges main jet within extender, eliminating chance of air bubbles getting through

PART # HS42/001‑K

PART # 1006‑0248

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

990‑662‑002

HS42/001‑K

DESCRIPTION HSR48 main jet extension kit

SUG. RETAIL

990‑605‑065 990‑662‑002

DESCRIPTION Mikuni‑to‑CV carb air box adapter w/ three mounting screws Short idle screw adjuster Choke cable, for use with Mikuni plastic nut, spring and brass plunger

SUG. RETAIL $21.95 16.95 29.95

$29.95

CRUISE CONTROL BRACKET FOR MIKUNI •Fits all years with Mikuni HSR42/45/48 using stock cables •Retains cruise control when adding a Mikuni/Screamin’ Eagle carb •Made in the U.S.A. PART # 1013‑0034

KHS‑016

DESCRIPTION For Mikuni HSR42/45/48 carbs

SUG. RETAIL $147.95

ENGINE KHS‑031

TRANSMISSION & DRIVELINE CARBURETOR REBUILD KITS GASKETS & SEALS

CARB REBUILD KIT FOR MIKUNI

ELECTRICAL

•Includes all required parts to completely rebuild a carb •For HSR42/45mm carburetors PART # 1003‑0293

LIGHTING

•Includes all the parts needed to rebuild HSR42/45 or HSR48 carburetors PART # KHS‑016 KHS‑031

DESCRIPTION Rebuild kit for HSR42/45mm carbs

1003‑0291

GENUINE BENDIX CARB REBUILD KITS •Rebuild kit includes all necessary gaskets, seals, idle screw and accelerator pump

CABLES 1003‑0292

TANKS & OIL FILTERS

PART # DS‑289084

PART # 1003‑0292 1003‑0291

DESCRIPTION For 88‑06 Keihin CV carbs For 84‑89 Keihin butterfly carbs

SUG. RETAIL $16.95 16.95

DS‑289098

CARB REBUILD KIT FOR KEIHIN CV •For use with all 90‑06 Big Twin or 88‑06 XL models using the CV carb •Includes all the necessary needles, O‑rings, seals and gaskets etc. for a complete rebuild

DS‑289089

PART # DS‑289109

FOOTRESTS & LICENSE PLATE FRAMES

DESCRIPTION For all 88‑06 CV carbs

SUG. RETAIL $39.95

KEIHIN CARB ACCELERATOR PUMP KIT

WHEELS & AXLES

502

SUG. RETAIL $47.95

•Kits include all necessary parts to rebuild a butterfly style or CV style Keihin carb

FRAMES, SUSPENSION & FENDERS

COVERS, SECURITY & GENERAL

DESCRIPTION 40mm Bendix rebuild kit for 84‑89

CARB REBUILD KITS FOR KEIHIN

DASHES & GAUGES

HARDWARE, CHEMICALS & TOOLS

SUG. RETAIL $43.50 43.50

SUG. RETAIL $36.95

HANDLEBARS, CONTROLS & MIRRORS

BRAKES

DESCRIPTION HSR42/45 Carb rebuild kit HSR48 Carb rebuild kit

•Removing the float bowl and drilling one hole is all that is required; no need to remove the carb from the engine •High‑flow accelerator pump will increase fuel flow through the pump, significantly improving the low‑end and mid‑range response •Made in the U.S.A.

KEIHIN CARB REBUILD KITS •Includes the parts necessary for rebuilding carbs •PART #DS‑289089 features Viton (not neoprene) needles PART # DS‑289089 DS‑289098

DESCRIPTION For 84‑89 butterfly carbs; repl. OEM #27006‑76 For all 88‑06 CV carbs

SUG. RETAIL $19.95 19.95

PART # DS‑289096

All part numbers in BLUE are new for 2013.

DESCRIPTION For any 84‑89 Harley models w/ stock Keihin carburetors

SUG. RETAIL $24.95


SECTION

7

WINDSHIELDS & FAIRINGS ACCELERATOR PUMP DIAPHRAGM

1050-0207

1050-0172

TOURING

•Sold each •Made in the U.S.A. PART # DS-174445

DESCRIPTION For 85-89 Big Twin, 86-89 XL w/ OEM Keihin carb; repl. OEM #27361-76

SUG. RETAIL

AUDIO & COMMUNICATION

$12.95

IDLE AIR ADJUSTING SCREWS FOR ALL CV CARBURETORS

•Made in the U.S.A. NOTE: No warranty on rubber diaphragm. PART # 2101-0008

LUGGAGE

•Knurled and slotted head for easy adjustment •Includes brass or stainless-steel screw, O-ring, washer and spring •Made in the U.S.A.

40MM CV VACUUM PISTON

DESCRIPTION For 88-06 40mm carb; repl. OEM #27585-88

SUG. RETAIL $41.95

DESCRIPTION Brass screw Stainless-steel screw

SUG. RETAIL $29.95 29.95

EXHAUST

•Easy way to add extra torque and horsepower •Machined from solid 6061 T-6 billet aluminum that completely eliminates porosity problems •Machined finish can be polished to a bright luster •Made in the U.S.A. PART # DESCRIPTION FOR S&S E & B SERIES CARBURETORS (17/8”) 1013-0004 1” 1013-0005 11/2” 1013-0006 2” FOR S&S G & D SERIES CARBURETORS (21/16”) 1013-0007 1” 1013-0008 11/2” 1013-0009 2”

FUEL/AIR SYSTEMS

CARBURETOR INSULATOR BLOCK KIT

CARBURETOR SPACERS

1013-0004

SUG. RETAIL $33.95 39.95 39.95

•Kit includes 3/8” fiber insulator block and gaskets •Designed to reduce the risk of boiling fuel in the carb •Made in the U.S.A. PART # 2011-1214

DESCRIPTION For custom applications; 1.86” i.d. w/ 23/4” center-to-center mounting holes

DS-174381

ENGINE

SUG. RETAIL

GASKETS & SEALS

DS-173537

33.95 39.95 39.95

ELECTRICAL

LIGHTING

1007-0157

HANDLEBARS, CONTROLS & MIRRORS

•Kits contain carb-to-intake seal and two intake-to-cylinder head seals unless noted PART # DESCRIPTION SUG. RETAIL DS-174381 40mm seal kit for 99-06 Twin Cam, 90-99 80” Evolution and 88-06 XL w/ OEM carbs $11.95 DS-173537 44mm seal kit for 99-06 Twin Cam, 90-99 80” Evolution and 88-06 XL w/ Screaming Eagle carbs 11.95 0935-0085 1671 Edelbrock manifold seal kit; repl. OEM # 27002-E1671 7.95

DS-289076

DS-289121

NOTE: Covered under the following U.S. patent #s: 5,233,180/5,562,868/ 5,662,836/5,810,264/6,270,060.

DS-289075 1007-0157 DS-289121 DS-289120

SUG. RETAIL $105.95 60.95 56.95

FRAMES, SUSPENSION & FENDERS NO-HASSLE JET KITS FOR CV CARBURETORS •Genuine Keihin parts •Includes two slow jets, three main jets and a jet needle •No need for drilling •Detailed instructions for jetting your motor from stock to modified PART # DS-289331 1007-0015 DS-289332 DS-289334

85.95 47.95

BRAKES

DASHES & GAUGES

DS-289331

THE ORIGINAL “POWER TUBE” ATOMIZER •Atomizer power tube and jets are CNC-machined from brass for consistency and accuracy •Power tube jet kits provide fine tuning with increased horsepower when using a less restrictive air cleaner and exhaust •Converts fuel from a squirting liquid to a fine mist •Eliminates spitting and popping through the carburetor •Master kits include slow jets, main jets, slide spring, drill bit and needles •Made in the U.S.A.

CABLES

TANKS & OIL FILTERS

DS-289120

DESCRIPTION Performance master kit for 88-06 stock 40mm CV carbs Power Tube for HSR 42 and 45 w/ jets Power Tube for HSR 42 and 45 (w/o jets) Power Tube for 88-95 stock CV carbs (Big Twin, XL, Buell) Power Tube for S&S B, D, E and G series carburetors

TRANSMISSION & DRIVELINE

$19.95

CARBURETOR AND INTAKE MANIFOLD SEAL KITS

PART # DS-289076

SEATS & SISSY BARS

1013-0006

1013-0005

DS-289075

PART # 1050-0172 1050-0207

DS-289333 DS-196002

DESCRIPTION For 90-99 Evolution Big Twin For 04-06 XL 883/1200 For 88-03 XL 1200 (except 97-03 1200S) For 97-03 XL1200S, 94-98 Buell S1, S2/S2T, S3/S3T and M2 For 88-03 XL 883 Keihin slow jet screwdriver

All part numbers in BLUE are new for 2013.

SUG. RETAIL $39.95 38.95 39.95 39.95 39.95 15.95

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

503


SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

CV CARB JET KIT •Recalibrate your stock CV carb to make the most out of the air cleaner, exhaust and cam changes or head work •Kit contains a #5 MAHR needle, 08 BOO jet holder, #45, #48 and #50 slow jets, and #190, #195, #200 and #205 main jets •Suggested jetting guidelines are included with the kit •Made in the U.S.A.

PART # DS-195100

DESCRIPTION For 99-06 Twin Cam

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING

RECALIBRATION KIT FOR 40MM KEIHIN CV CARB

NOTE: Not for use on pollution-controlled vehicles used on streets or highways. SUG. RETAIL $56.95

•Recalibrate your stock Keihin CV carb to make full use of the performance potential •Include the jets, needles, instructions, etc. necessary to recalibrate stock engines with CV carbs •Kits provide broad-range performance gains and maintain stock driveability PART # DS-290347 DS-290148 DS-289306 DS-289303 DS-289450 1007-0001 DS-289451 1007-0002 DS-289309 DS-290348

DESCRIPTION For 00-06 Twin Cam For 99 Twin Cam For 96-99 80” Big Twin and 96-03 XL For 90-95 Big Twin, XL 883, 1200 For 89-03 XL 883 “race only” For 04-06 XL 883 For 98-03 XL1200 Sport For 04-06 XL 1200 For 99-02 Buell M2 Cyclone For 00-02 Buell blast

SUG. RETAIL $96.95 96.95 96.95 96.95 96.95 96.95 96.95 96.95 96.95 96.95

DS-290356

504

PART # DJ-8101

DESCRIPTION For 88-89 XL 883/1200 models

SUG. RETAIL $96.95

THUNDERSLIDE JET KITS

PART # DS-290349 DS-290149 DS-289307 DS-289308 DS-289454 1007-0005

DASHES & GAUGES

COVERS, SECURITY & GENERAL

•Designed for motorcycles with stock engines using stock airbox, air filter and stock or aftermarket exhaust •Non-accelerator pump models •Fully adjustable to allow for the use of well-designed aftermarket exhausts and stock replacement air filter •Improves throttle response and driveability •Power increases of approximately 5% throughout the entire power range

•Designed for engines with stock or aftermarket air filter and exhaust system •Revolutionary composite plastic slide provides unparalleled performance gains in both horsepower DS-289307 and mileage •Unique set of lift holes moderate how the slide moves with respect to throttle position; the faster the slide opens, the quicker the throttle response •Kit also includes jets, needles, clips and other necessary parts for CV carbs •Made in the U.S.A.

TANKS & OIL FILTERS

HARDWARE, CHEMICALS & TOOLS

SUG. RETAIL $49.95

STAGE 1 JET KIT

BRAKES

WHEELS & AXLES

DESCRIPTION For all 88-99 CV carbs (except Twin Cam 88)

RECALIBRATION KITS

CABLES

FOOTRESTS & LICENSE PLATE FRAMES

PART # DS-289304

DS-289306

HANDLEBARS, CONTROLS & MIRRORS

FRAMES, SUSPENSION & FENDERS

•Super high-quality recalibration kit for CV carbs •Kit has all the components for dialing in a CV carb with or without an accelerator pump

DESCRIPTION For 00-06 Twin Cam For 99 Twin Cam For 90-99 Evolution Big Twin For 89-03 XL 1200 (not Sport) (Stage 1) For 98-03 XL 1200 Sport (Stage 1) For 04-06 XL 1200/C/R

SUG. RETAIL $149.95 149.95 149.95 149.95 149.95 149.95

STAGE 7 THUNDERSLIDE WITH JET KITS •Stage 7 kits are for 80 plus horsepower engines and include a taller carburetor top for more slide movement •Revolutionary composite plastic slide provides unparalleled performance gains in both horsepower and mileage •Unique set of lift holes moderate how the slide moves with respect to throttle position; the faster the slide opens, the quicker the throttle response •Kits include jets, needles, clips, carburetor top and other necessary parts for CV carbs •Made in the U.S.A. PART # DS-290356 DS-290352 DS-290351 DS-290350

DESCRIPTION For 00-06 Twin Cam For 90-99 Big Twin Evolution For Screamin’ Eagle 44mm Keihin CV Twin Cam 88 For Screamin’ Eagle 44mm Keihin CV Evolution

SUG. RETAIL $164.95 164.95 164.95 164.95

CARBURETOR JET KITS •Designed to recalibrate OEM stock carburetors for use with Vance & Hines exhaust systems •Include complete needle assemblies with five ranges of adjustment, main jets, clips, washer and appropriate drill bits •Include detailed instructions for easy installation PART # V22827 V22831

All part numbers in BLUE are new for 2013.

DESCRIPTION For 00-06 Twin Cam models For Buell 00-05 Blast

SUG. RETAIL $97.95 97.95


SECTION

7

WINDSHIELDS & FAIRINGS CV MAIN JET KIT •Kit contains 195, 200, 205, 210, 215 and 220 main jets •Made in the U.S.A. PART # DS-289186

TOURING

DESCRIPTION For CV carbs on 90-06 Big Twin and 88-06 XL models

DS-289297

1007-0153

SUG. RETAIL $20.95

AUDIO & COMMUNICATION

1007-0152 1007-0155

1007-0154

DS-289300

SEATS & SISSY BARS

1007-0156

DS-289298

THUNDERJET AND THUNDERPRO THUNDERJET

EXHAUST

•ThunderJet’s patented third fuel circuit delivers needed fuel to the engine only at higher rpm (4500 and up) •Allows use of the main jet to tune for smooth, broad mid-range power – supplement the top-end with the ThunderJet •Jets are used to control the amount of fuel sent to the engine •Comes with complete installation/tuning instructions and extra jets •The system can operate over a wide range of altitude and atmospheric conditions •ThunderPro ThunderJet is designed for today’s larger-displacement engines, with a higher capacity fuel delivery tube for increased volume when used in larger, high-rpm engines •Made in the U.S.A. NOTE: Some machining of carb body is required. THUNDERJET KITS FOR KEIHIN CV CARBS

THUNDERPRO THUNDERJET KITS FOR S&S G AND D CARBS

DESCRIPTION Natural aluminum Polished Black

THUNDERJET KITS FOR S&S E AND B CARBURETORS PART # DESCRIPTION 1007-0150 Polished 1007-0151 Natural aluminum DS-289298 Red

SUG. RETAIL $65.95 82.95 65.95

PART # 1007-0154 1007-0155 1007-0156

DESCRIPTION Polished Natural aluminum Black

SUG. RETAIL $89.95 77.95 77.95

SUG. RETAIL $82.95 65.95 65.95

PART # DS-289299 DS-289300

DESCRIPTION Black Blue

SUG. RETAIL $65.95 65.95

ENGINE

GASKETS & SEALS ELECTRICAL

LIGHTING

QUICKSHOT •Cost-effective, bolt-on upgrade that allows accelerator pump fuel spray to be adjusted simply with the turn of a screw •Patent-pending design •Accelerator pump check valve stops bogging and coughing •Adjustable fuel jet to control accelerator pump spray •Precision single hole sprayer tip directs and injects the fuel more efficiently than stock •A fine high-speed stream of fuel atomizes faster to improve roll-on acceleration •Instant throttle response •Improves low end performance and PART # fuel economy •Easy bolt-on; no modifications necessary 1050-0241

FUEL/AIR SYSTEMS

TRANSMISSION & DRIVELINE

NOTE: Legal in California only for racing vehicles which may never be used upon a highway. PART # 1007-0152 1007-0153 DS-289297

LUGGAGE

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES DESCRIPTION Quickshot for S&S Super E & G carburetors

SUG. RETAIL $99.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

TWINSHOT ADJUSTABLE FUEL CONTROL •Cost-effective, bolt-on upgrade eliminates the sluggish and inconstant throttle response of CV-40-carbureted H-D models •Converts all OEM CV-40 carburetors to a standardized fuel system •Precision twin-hole sprayer for improved roll-on acceleration •Patented Quickshot accelerator pump technology eliminates low-speed bogging and coughing •Adjustable fuel jet to control accelerator pump fuel spray •Dual check valve system for consistent spray pressure •Removable sprayer allows convenient service and maintenance •Removable main jet cap for easy access tuning •Precision accelerator pump plunger rod improves spray response •Stiffer spring on activation arm delivers consistent spray response •Available in polished aluminum or matte black finish •Bolt-on, no modifications required DESCRIPTION •Includes new float bowl O-ring, new PART # FOR 92-06 BIG TWIN AND XL WITH KEIHIN CV-40 CARBURETOR plunger arm and plunger 1050-0233 Polished aluminum arm boot 1050-0234 Matte black •Made in the U.S.A.

All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

1050-0233

SUG. RETAIL $179.95 179.95

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

505


SECTION

7 DS‑0451

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

JET KITS FOR S&S CARBS •For jetting most stock and performance engines •Dealer jet kit contains three each of all intermediate jets (except 1005‑0008 and 1005‑0009) and five each of all main jets (except 1006‑0233, 1006‑0234, 1006‑0235, 1006‑0236, 1006‑0237 and 1006‑0238) plus a main jet tool •Low‑range kit contains one each of the following intermediate jets (.025, .0265, .028, .0295) and one each of the following main jets (.062, .064, .066, .068, .070, .072, .074) •High‑range kit contains one each of the following intermediate jets (.0295, .031, .032. .033) and one each of the following main jets (.072, .074, .076, .078, .080, .082, .084) •Replacement jets also available separately •Made in the U.S.A. SUG. RETAIL SUG. RETAIL PART # DESCRIPTION JET KITS 1003‑0015 Dealer jet kit DS‑0450 Low‑range kit DS‑0451 High‑range kit INTERMEDIATE JETS DS‑94025 .025 intermediate jet (3‑pk.) DS‑940265 .0265 intermediate jet (3‑pk.) DS‑94028 .028 intermediate jet (3‑pk.) DS‑940295 .0295 intermediate jet (3‑pk.) DS‑94031 .031 intermediate jet (3‑pk.) DS‑94032 .032 intermediate jet (3‑pk.) DS‑94033 .033 intermediate jet (3‑pk.) 1005‑0008 .036 intermediate jet (3‑pk.) 1005‑0009 .040 intermediate jet (3‑pk.)

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

$317.95 46.95 46.95 7.95 7.95 7.95 7.95 7.95 7.95 7.95 7.95 7.95

PART # MAIN JETS 1006‑0228 1006‑0229 1006‑0230 1006‑0231 1006‑0232 1006‑0233 1006‑0234 1006‑0235 1006‑0236 1006‑0237 1006‑0238 DS‑72062 DS‑72064

COVERS, SECURITY & GENERAL

506

main main main main main main main main main main main main main

jet jet jet jet jet jet jet jet jet jet jet jet jet

(5‑pk.) (5‑pk.) (5‑pk.) (5‑pk.) (5‑pk.) (5‑pk.) (5‑pk.) (5‑pk.) (5‑pk.) (5‑pk.) (5‑pk.) (5‑pk.) (5‑pk.)

$7.95 7.95 7.95 7.95 7.95 7.95 7.95 7.95 7.95 7.95 7.95 7.95 7.95

PART # MAIN JETS DS‑72066 DS‑72068 DS‑72070 DS‑72072 DS‑72074 DS‑72076 DS‑72078 DS‑72080 DS‑72082 DS‑72084

SUG. RETAIL (ea.)

DESCRIPTION (CONT) .066 main jet (5‑pk.) .068 main jet (5‑pk.) .070 main jet (5‑pk.) .072 main jet (5‑pk.) .074 main jet (5‑pk.) .076 main jet (5‑pk.) .078 main jet (5‑pk.) .080 main jet (5‑pk.) .082 main jet (5‑pk.) .084 main jet (5‑pk.)

$7.95 7.95 7.95 7.95 7.95 7.95 7.95 7.95 7.95 7.95

PILOT JETS FOR KEIHIN CARBS

•Precision‑made in Japan •Master jet kit consists of 14 five‑packs, includes jets from #140 to #250; you furnish box •Individual jets sold to dealer in five‑packs; sold to consumer each PART # DESCRIPTION FOR 90‑06 BIG TWIN AND 88‑06 XL DS‑289538 Master jet kit DS‑289533 #140 main jet DS‑289534 #145 main jet DS‑289535 #150 main jet DS‑289536 #155 main jet DS‑289321 #160 main jet DS‑289322 #165 main jet DS‑289323 #170 main jet DS‑289324 #175 main jet DS‑289325 #180 main jet DS‑289326 #185 main jet DS‑289327 #190 main jet DS‑289328 #195 main jet DS‑289329 #200 main jet DS‑289537 #205 main jet 1006‑0279 #210 main jet 1006‑0280 #220 main jet 1006‑0281 #230 main jet 1006‑0282 #240 main jet 1006‑0283 #250 main jet

SUG. RETAIL (ea.) $3.95 3.95 3.95 3.95 3.95 3.95 3.95 3.95 3.95 3.95 3.95 3.95 3.95 3.95 3.95 3.95 3.95 3.95 3.95 3.95

(5‑pk.) (5‑pk.) (5‑pk.) (5‑pk.) (5‑pk.) (5‑pk.) (5‑pk.) (5‑pk.) (5‑pk.) (5‑pk.) (5‑pk.) (5‑pk.) (5‑pk.) (5‑pk.) (5‑pk.) (5‑pk.) (5‑pk.) (5‑pk.) (5‑pk.)

•Available for both styles (butterfly and CV) of Keihin carbs 76‑06 •Precision‑made in Japan •Master kit for CV‑style consists of nine five‑packs, includes jets from #40 to #55; you furnish box •Individual jets sold to dealer in five‑packs; sold to consumer each

SUG. RETAIL (ea.)

PART # DESCRIPTION BUTTERFLY‑STYLE CARB; 76‑89 BIG TWIN AND 76‑87 XL DS‑289310 #50 pilot jet (5‑pk.) DS‑289311 #52 pilot jet (5‑pk.) DS‑289312 #54 pilot jet (5‑pk.) DS‑289313 #56 pilot jet (5‑pk.) DS‑289314 #58 pilot jet (5‑pk.)

SUG. RETAIL (ea.)

•Brass carburetor pilot jets are high precision and flow‑calibrated •Kit includes one pilot jet the following sizes: 35, 38, 40, 42, 45, 48, 50, 52, 55, 58, 60, 62 and 65 DESCRIPTION Pilot jet assortment

$3.95 3.95 3.95 3.95 3.95 3.95 3.95 3.95 3.95 3.95 3.95

$3.95 3.95 3.95 3.95 3.95

1006‑0288

•High‑precision brass carburetor jets •Jets are flow‑calibrated for extremely accurate fuel flow rate •Kit includes two jets of the following sizes: 160, 165, 170, 175, 180, 185, 190, 195, 200, 205, 210 and 220 •Replacement jets available in 2‑pack

PILOT JET ASSORTMENT FOR KEIHIN CV CARBURETORS

PART # 1005‑0157

DS‑289310

PART # DESCRIPTION CV‑STYLE CARB; 90‑06 BIG TWIN AND 88‑06 XL DS‑289542 Master jet kit DS‑289315 #40 pilot jet (5‑pk.) DS‑289316 #42 pilot jet (5‑pk.) DS‑289317 #44 pilot jet (5‑pk.) DS‑289318 #45 pilot jet (5‑pk.) DS‑289319 #46 pilot jet (5‑pk.) DS‑289320 #48 pilot jet (5‑pk.) DS‑289539 #50 pilot jet (5‑pk.) DS‑289540 #52 pilot jet (5‑pk.) DS‑289541 #54 pilot jet (5‑pk.) 1005‑0155 #55 pilot jet (5‑pk.)

MAIN JET ASSORTMENT FOR KEIHIN CV CARBURETORS

FOOTRESTS & LICENSE PLATE FRAMES

HARDWARE, CHEMICALS & TOOLS

.040 .042 .044 .046 .048 .050 .052 .054 .056 .058 .060 .062 .064

MAIN JETS FOR CV‑TYPE KEIHIN CARBS

FRAMES, SUSPENSION & FENDERS

WHEELS & AXLES

(ea.)

DESCRIPTION

DS‑289321

TRANSMISSION & DRIVELINE GASKETS & SEALS

(ea.)

SUG. RETAIL $50.95

PART # DEALER KIT 1006‑0288 JETS (2‑PK.) 1006‑0289 1006‑0290 1006‑0291 1006‑0292

DESCRIPTION Main jet assortment 165 170 175 180

main main main main

jet jet jet jet

(2‑pk.) (2‑pk.) (2‑pk.) (2‑pk.)

SUG. RETAIL $49.95 5.00 5.00 5.00 5.00

All part numbers in BLUE are new for 2013.

PART # DESCRIPTION JETS (2‑PK.) (CONT) 1006‑0293 185 main jet (2‑pk.) 1006‑0294 190 main jet (2‑pk.) 1006‑0295 195 main jet (2‑pk.) 1006‑0296 200 main jet (2‑pk.) 1006‑0297 205 main jet (2‑pk.)

SUG. RETAIL $5.00 5.00 5.00 5.00 5.00


SECTION

7

WINDSHIELDS & FAIRINGS

RD PRECISION MAIN JETS •Brass carburetor jets are high precision and flow-calibrated for extremely accurate fuel flow rate •Available in a range of sizes for Mikuni and Keihin applications •High-quality replacement; NOT original Mikuni or Keihin jets •Individual jet sizes sold in 4-pack to dealers; 1006-0012 sold each to consumer •Dealer kits that include a range of sizes also available

Mikuni-style slot head

Mikuni-style hex head

TOURING AUDIO & COMMUNICATION

DEALER JET KITS PART # 1006-0012 1006-0013 1006-0014 1006-0015 1006-0016 1006-0017

TYPE Mikuni-style slot head (SJ prefix) Mlkuni-style hex head (HJ prefix) Mikuni-style hex head (HJ prefix) Keihin-style slot head (KJ prefix) Keihin-style hex head (CR prefix) Keihin-style hex head (CR prefix)

DESCRIPTION 4-pc. each jet 2-pc. each jet 2-pc. each jet 4-pc. each jet 2-pc. each jet 2-pc. each jet

sizes sizes sizes sizes sizes sizes

72.5 through 160 70 through 230 240 through 500 80 through 190 80 through 158 160 through 235

SUG. RETAIL $353.95 113.95 113.95 287.95 133.95 133.95

LUGGAGE Kelhin-style slot head

Kelhin-style hex head

MIKUNI-STYLE SLOT HEAD (SJ PREFIX) PART # 1006-0018 1006-0019 1006-0020 1006-0021 1006-0022 1006-0023 1006-0024 1006-0025 1006-0026 1006-0027

JET SIZE SUG. RETAIL (EA.) 72.5 $2.75 75 2.75 77.5 2.75 80 2.75 82.5 2.75 85 2.75 87.5 2.75 90 2.75 92.5 2.75 95 2.75

PART # 1006-0028 1006-0029 1006-0030 1006-0031 1006-0032 1006-0033 1006-0034 1006-0035 1006-0036 1006-0037

JET SIZE SUG. RETAIL (EA.) 97.5 $2.75 100 2.75 102.5 2.75 105 2.75 107.5 2.75 110 2.75 112.5 2.75 115 2.75 117.5 2.75 120 2.75

PART # 1006-0038 1006-0039 1006-0040 1006-0041 1006-0042 1006-0043 1006-0044 1006-0045 1006-0046 1006-0047

JET SIZE SUG. RETAIL (EA.) 122.5 $2.75 125 2.75 127.5 2.75 130 2.75 132.5 2.75 135 2.75 137.5 2.75 140 2.75 142.5 2.75 145 2.75

PART # 1006-0048 1006-0049 1006-0050 1006-0051 1006-0052 1006-0053 1006-0054

JET SIZE SUG. RETAIL (EA.) 147.5 $2.75 150 2.75 152.5 2.75 155 2.75 157.5 2.75 160 2.75 170 2.75

JET SIZE SUG. RETAIL (EA.) 70 $2.75 80 2.75 90 2.75 100 2.75 105 2.75 110 2.75 115 2.75 120 2.75 125 2.75 130 2.75 135 2.75 140 2.75 145 2.75 150 2.75 155 2.75 160 2.75 165 2.75 170 2.75

PART # 1006-0073 1006-0074 1006-0075 1006-0076 1006-0077 1006-0078 1006-0079 1006-0080 1006-0081 1006-0082 1006-0083 1006-0084 1006-0085 1006-0086 1006-0087 1006-0088 1006-0089 1006-0090

JET SIZE SUG. RETAIL (EA.) 175 $2.75 180 2.75 185 2.75 190 2.75 195 2.75 200 2.75 210 2.75 220 2.75 230 2.75 240 2.75 250 2.75 260 2.75 270 2.75 280 2.75 290 2.75 300 2.75 310 2.75 320 2.75

PART # 1006-0091 1006-0092 1006-0093 1006-0094 1006-0095 1006-0096 1006-0097 1006-0098 1006-0099 1006-0100 1006-0101 1006-0102 1006-0103 1006-0104 1006-0105 1006-0106 1006-0107 1006-0108

JET SIZE SUG. RETAIL (EA.) 330 $2.75 340 2.75 350 2.75 360 2.75 370 2.75 380 2.75 390 2.75 400 2.75 410 2.75 420 2.75 430 2.75 440 2.75 450 2.75 460 2.75 470 2.75 480 2.75 490 2.75 500 2.75

PART # 1006-0109 1006-0110 1006-0111 1006-0112 1006-0113 1006-0114 1006-0115 1006-0116 1006-0117 1006-0118 1006-0119 1006-0120 1006-0121 1006-0122 1006-0123 1006-0124 1006-0125 1006-0126

JET SIZE SUG. RETAIL (EA.) 510 $2.75 520 2.75 530 2.75 540 2.75 550 2.75 560 2.75 570 2.75 580 2.75 590 2.75 600 2.75 610 2.75 620 2.75 630 2.75 640 2.75 650 2.75 660 2.75 670 2.75 680 2.75

KEIHIN-STYLE SLOT HEAD (KJ PREFIX) PART # JET SIZE SUG. RETAIL (EA.) 1006-0127 72.5 $2.75 1006-0128 75 2.75 1006-0129 77.5 2.75 1006-0130 80 2.75 1006-0131 82.5 2.75 1006-0132 85 2.75 1006-0133 87.5 2.75 1006-0134 90 2.75 1006-0135 92.5 2.75 1006-0136 95 2.75

PART # 1006-0137 1006-0138 1006-0139 1006-0140 1006-0141 1006-0142 1006-0143 1006-0144 1006-0145 1006-0146

JET SIZE SUG. RETAIL (EA.) 97.5 $2.75 100 2.75 102.5 2.75 105 2.75 107.5 2.75 110 2.75 112.5 2.75 115 2.75 117.5 2.75 120 2.75

PART # 1006-0147 1006-0148 1006-0149 1006-0150 1006-0151 1006-0152 1006-0153 1006-0154 1006-0155 1006-0156

JET SIZE SUG. RETAIL (EA.) 122.5 $2.75 125 2.75 127.5 2.75 130 2.75 132.5 2.75 135 2.75 137.5 2.75 140 2.75 142.5 2.75 145 2.75

PART # 1006-0157 1006-0158 1006-0159 1006-0160 1006-0161 1006-0162 1006-0163 1006-0164

JET SIZE SUG. RETAIL (EA.) 147.5 $2.75 150 2.75 152.5 2.75 155 2.75 157.5 2.75 160 2.75 170 2.75 190 2.75

PART # 1006-0181 1006-0182 1006-0183 1006-0184 1006-0185 1006-0186 1006-0187 1006-0188 1006-0189 1006-0190 1006-0191 1006-0192 1006-0193 1006-0194 1006-0195 1006-0196

JET SIZE SUG. RETAIL (EA.) 120 $2.75 122 2.75 125 2.75 128 2.75 130 2.75 132 2.75 135 2.75 138 2.75 140 2.75 142 2.75 145 2.75 148 2.75 150 2.75 152 2.75 155 2.75 158 2.75

PART # 1006-0197 1006-0198 1006-0199 1006-0200 1006-0201 1006-0202 1006-0203 1006-0204 1006-0205 1006-0206 1006-0207 1006-0208 1006-0209 1006-0210 1006-0211 1006-0212

JET SIZE SUG. RETAIL (EA.) 160 $2.75 162 2.75 165 2.75 168 2.75 170 2.75 172 2.75 175 2.75 178 2.75 180 2.75 182 2.75 185 2.75 188 2.75 190 2.75 192 2.75 195 2.75 198 2.75

PART # 1006-0213 1006-0214 1006-0215 1006-0216 1006-0217 1006-0218 1006-0219 1006-0220 1006-0221 1006-0222 1006-0223 1006-0224 1006-0225 1006-0226 1006-0227

JET SIZE SUG. RETAIL (EA.) 200 $2.75 202 2.75 205 2.75 208 2.75 210 2.75 212 2.75 215 2.75 218 2.75 220 2.75 222 2.75 225 2.75 228 2.75 230 2.75 232 2.75 235 2.75

MIKUNI-STYLE HEX HEAD (HJ PREFIX) PART # 1006-0055 1006-0056 1006-0057 1006-0058 1006-0059 1006-0060 1006-0061 1006-0062 1006-0063 1006-0064 1006-0065 1006-0066 1006-0067 1006-0068 1006-0069 1006-0070 1006-0071 1006-0072

KEIHIN-STYLE HEX HEAD (CR PREFIX) PART # 1006-0165 1006-0166 1006-0167 1006-0168 1006-0169 1006-0170 1006-0171 1006-0172 1006-0173 1006-0174 1006-0175 1006-0176 1006-0177 1006-0178 1006-0179 1006-0180

JET SIZE SUG. RETAIL (EA.) 80 $2.75 82 2.75 85 2.75 88 2.75 90 2.75 92 2.75 95 2.75 98 2.75 100 2.75 102 2.75 105 2.75 108 2.75 110 2.75 112 2.75 115 2.75 118 2.75

All part numbers in BLUE are new for 2013.

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

507


SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE

PILOT JETS FOR MIKUNI VM28/486 •Fit all RS, HS and HSR carburetors •28.1 mm long •Sold to dealer as 4‑pack; sold to consumer as each PART # 1005‑0047 1005‑0048 1005‑0049 1005‑0050 1005‑0051 1005‑0052 1005‑0053

JET SIZE 10 12.5 15 17.5 20 22.5 25

SUG. RETAIL $3.25 3.25 3.25 3.25 3.25 3.25 3.25

PART # 1005‑0054 1005‑0055 1005‑0056 1005‑0057 1005‑0058 1005‑0059

JET SIZE 27.5 30 32.5 35 37.5 40

SUG. RETAIL $3.25 3.25 3.25 3.25 3.25 3.25

PART # 1005‑0060 1005‑0061 1005‑0062 1005‑0063 1005‑0064 1005‑0065

JET SIZE 42.5 45 47.5 50 52.5 55

SUG. RETAIL $3.25 3.25 3.25 3.25 3.25 3.25

PART # 1005‑0066 1005‑0067 1005‑0068 1005‑0069 1005‑0070 1005‑0071

JET SIZE 57.5 60 62.5 65 67.5 70

SUG. RETAIL $3.25 3.25 3.25 3.25 3.25 3.25

SEATS & SISSY BARS EXHAUST KHS‑025

FUEL/AIR SYSTEMS JET ASSORTMENT KITS FOR HSR42/HSR45/HSR48

ENGINE

•HSR42 kit includes 150 through 170 main jets (2 each); 22.5 through 35 pilot jets (2 each); ‑96, ‑97 and ‑98 needles (1 each); 2 #60 a/p nozzles; needle clip; all necessary washers, special jet box •HSR45 kit includes 165 through 185 main jets (2 each); 20 through 32.5 pilot jets (2 each); ‑95, ‑96 and ‑98 needles (1 each); 2 #60 a/p nozzles; 2 O‑rings, 4 jet needle E‑rings; all necessary washers •HSR48 kit includes 180 through 210 main jets (2 each); 20 through 32.5 pilot jets (2 each); ‑95, ‑96 and ‑98 needles (1 each); 2 #60 a/p nozzles; 2 O‑rings, 4 jet needle E‑rings; all necessary washers •Some kit components are available separately

TRANSMISSION & DRIVELINE GASKETS & SEALS

PART # DESCRIPTION JET KITS KHS‑025 HSR42 1007‑0323 HSR45 1007‑0322 HSR48 INDIVIDUAL PARTS 1007‑03241 Jet washers (4‑pk.) for HSR45 1007‑03271 O‑rings (4‑pk.) for HSR45 1007‑03261 Pump nozzles (4‑pk.) for HSR45/48 1007‑03251 Needle jet E‑rings (4‑pk.) for HSR45/48 1004‑0010 ‑96 needle jet for HSR45/48 1004‑0011 ‑98 needle jet for HSR45/48

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1007‑0325 1007‑0326

1

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

508

SUG. RETAIL $116.95 116.95 116.95 .95 3.95 5.95 .95 16.95 16.95

Sold to dealer as a 4‑pk.; sold to consumer as each.

MAIN JETS FOR HSR CARBS •Large round‑type head main jets used in HSR42/45/48 series carbs •From 150 through 200 in increments of 2.5 •Sold to dealer as 4‑pack; sold to consumer as each •Genuine Mikuni PART # KN100604150 KN1006041525 KN100604155 KN1006041575 KN100604160 KN1006041625 KN100604165 KN1006041675

DESCRIPTION #150 main jet #152.5 main jet #155 main jet #157.5 main jet #160 main jet #162.5 main jet #165 main jet #167.5 main jet

SUG. RETAIL $2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95

PART # KN100604170 KN1006041725 KN100604175 KN1006041775 KN100604180 KN1006041825 KN100604185 KN1006041875

DESCRIPTION #170 main jet #172.5 main jet #175 main jet #177.5 main jet #180 main jet #182.5 main jet #185 main jet #187.5 main jet

SUG. RETAIL $2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95

PART # KN100604190 KN1006041925 KN100604195 KN100604200 1006‑0246 1006‑0247

SUG. RETAIL $2.95 2.95 2.95 2.95 2.95

PART # KVM2848645 KVM2848650 KVM2848655 KVM2848660

DESCRIPTION #190 main jet #192.5 main jet #195 main jet #200 main jet #205 main jet #210 main jet

SUG. RETAIL $2.95 2.95 2.95 2.95 2.95 2.95

PILOT JETS FOR HSR CARBS •Genuine Mikuni pilot jets •Sold to dealer as 4‑pack; sold to consumer as each PART # KVM2848615 KVM28486175 KVM2848620 KVM28486225 KVM2848625

DESCRIPTION #15 pilot jet #17.5 pilot jet #20 pilot jet #22.5 pilot jet #25 pilot jet

SUG. RETAIL $2.95 2.95 2.95 2.95 2.95

PART # KVM28486275 KVM2848630 1005‑0012 KVM2848635 KVM2848640

DESCRIPTION #27.5 pilot jet #30 pilot jet #32.5 pilot jet #35 pilot jet #40 pilot jet

DESCRIPTION #45 pilot jet #50 pilot jet #55 pilot jet #60 pilot jet

SUG. RETAIL $2.95 2.95 2.95 2.95

JET NEEDLES FOR HSR SERIES CARBURETOR •Genuine Mikuni jet needles •Needles are available in a variety of sizes to suit most applications •Sold each HSR42 J8‑8DDY01‑95 J8‑8DDY01‑96

HSR45/48 J8‑8CFY02‑95 J8‑8CFY02‑96

DESCRIPTION Richest Richer

SUG. RETAIL $11.95 11.95

HSR42 J8‑8DDY01‑97 J8‑8DDY01‑98

HSR45/48 J8‑8CFY02‑97 J8‑8CFY02‑98

All part numbers in BLUE are new for 2013.

DESCRIPTION Standard Leaner

SUG. RETAIL $11.95 11.95


SECTION

7

WINDSHIELDS & FAIRINGS TOURING

1050-0180

POWER X-WING •Patented air vane requires no modifications to install •Acceleration gains from idle to wide-open throttle •Dyno tests show 2-5 horsepower gains and 4-6 ft.-lbs. max torque increases on OEM H-D engines •Independent tests were conducted on 88”, 96” and 110” engines •Complements popular air filter system upgrades •Made in the U.S.A. PART # 1050-0194 1050-0182

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

DESCRIPTION For 08-13 FLHT/FLHX/FLHR/FLTR models For 06-13 Softail/Dyna, 06-07 FLHT/ FLHX/FLHR/FLTR w/ Delphi EFI For 01-05 Softail, 04-05 Dyna, 02-05 FLHT/ FLHR/FLTR, 07-13 XL w/ Delphi EFI For 88-06 models w/ OEM CV carb For 02-13 V-Rod models

1050-0181 1050-0180 1050-0237

SUG. RETAIL $129.95 129.95

1050-0196 129.95 129.95 179.95

TURBULATOR •The turbulator uses TU-1 a fixed-vane vortex design that turns your intake manifold into a violent mixing chamber •These vanes eliminate heavy droplets of fuel, fuel stacking and keep fuel from puddling •The result is no more load or dive spots – just crisp, clean throttle response throughout the powerband •Complete atomization also increases fuel mileage and eliminates stand-off •Made in the U.S.A. SUG. PART # TU-1 TU-2

DESCRIPTION RETAIL Bendix/Zenith Carbs $14.95 S&S B & E series 14.95

PART # TU-4 TU-5

DESCRIPTION CV carbs SS Super G

SUG. RETAIL $14.95 14.95

DESCRIPTION Manifold for Mikuni carb, stock CV carb or Screamin’ Eagle CV carb Flanges for use w/ PART #1050-0222 when using a 44mm CV or 45mm Mikuni carb

SUG. RETAIL $102.95 36.95

FLANGEMOUNT INTAKE MANIFOLDS •Can be used to replace stock “compliance fitting” manifold on 84-89 and stock rigid-mount manifold from 90-99 •Use with stock or S&S cylinder heads •For use with stock 5.5550” 1050-0109 length cylinders •Requires the use of S&S intake seals and flanges (sold separately) •Made in the U.S.A. PART # DESCRIPTION FOR 84-99 EVOLUTION-STYLE BIG TWIN 1050-0109 For Super A, B, E, L, H-D Tillotson, Bendix, and Keihin carbs (no MAP sensor port) 1050-0110 For Super G carbs (no MAP sensor port)

SUG. RETAIL

129.95 129.95 129.95

FLANGE MOUNT INTAKE MANIFOLDS

ELECTRICAL

HANDLEBARS, CONTROLS & MIRRORS CABLES DS-289146

DESCRIPTION S&S E-series intake manifold S&S G-series intake manifold

BRAKES SUG. RETAIL $91.95 91.95

TANKS & OIL FILTERS DASHES & GAUGES

•Kit converts stock 80” Evolution manifold to a more rigid-mount system •Eliminates cracking and leaking problems associated with the stock rubber compliance fittings •Includes an S&S Performance manifold, mounting flanges, two specially molded O-rings and two .350” spacers for spacing out the stock air cleaner or carb mount bracket •Fits 84-99 80” models if flange-type carburetor or adapter is used •Replacement flange seals also available •Made in the U.S.A.

All part numbers in BLUE are new for 2013.

GASKETS & SEALS

LIGHTING

MANIFOLD CONVERSION KIT FOR 80” EVOLUTION

PART # DS-289230

ENGINE TRANSMISSION & DRIVELINE

NOTE: Not for use with an S&S G series carb. $91.95 91.95

FUEL/AIR SYSTEMS

DS-289102

SUG. PART # DESCRIPTION RETAIL DS-289101 Atomizer for 38mm Bendix and Keihin with 15/8” i.d. manifold $18.95 DS-289102 Atomizer for 40mm S&S, Mikuni and Screamin’ Eagle with 17/8” i.d. manifold 18.95 DS-289106 Atomizer for CV carbs 18.95

PART # DS-289146 1050-0046

EXHAUST

129.95

DS-289106

•For mounting an S&S E and G series carburetor or flange mount carburetor on a 99-06 Twin Cam motor with S&S or stock cylinder heads •Will also fit a 84-99 80” Evolution that requires a manifold with a map sensor port •Come with a map sensor port and match OEM intake ports •Made in the U.S.A.

•JIMS Stroker kits require an extended manifold and flange for 99-05 Big Twin carb models •Made in the U.S.A.

SUG. RETAIL $129.95

DS-289101

•Atomizers work as a turbulator to properly mix fuel entering the intake manifold for better efficiency and performance •Available to fit various carburetors •Made in the U.S.A.

TU-4

EXTENDED MANIFOLDS AND FLANGES FOR STROKER KITS

1050-0224

1050-0197 1050-0205

DESCRIPTION For 03-09 Buell XB12 models For Mikuni HSR 42/45 carbs w/ early style 1.75” H-D adapter For Mikuni HSR 42/45 carbs w/ late style 2” H-D adapter For Mikuni HSR 48 carb w/ 2” adapter For S&S Super E Shorty

THE SYSTEM II FUEL ATOMIZERS

1050-0222

PART # 1050-0222

PART # 1050-0236 1050-0195

DESCRIPTION Manifold conversion kit

SUG. RETAIL $107.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

509


SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES

SPIGOTMOUNT INTAKE MANIFOLDS FOR S&S HEADS

1050-0261

•Used to install a stock CV carburetor on S&S 1050-0244 35/8”, 4” and 41/8” bore motors •Will also fit S&S Hot Setup and Super Stock™ head kits •PART #1050-0244 is used to install 48mm CV or Mikuni carburetor on Twin Cam 88, 95 bore motors •Made in the U.S.A. NOTE: Requires the use of S&S manifold O-rings and U-rings, sold separately. PART # ENGINE SIZE CYLINDER LENGTH FOR S&S TWIN CAM STYLE MOTORS AND HEAD KITS 161722 88”/95” 4.9365” 1050-0244 88”/95” FOR S&S BIG TWIN EVOLUTION STYLE MOTORS AND HEAD KITS 161733 88”/107” 5.375”/4.870” 161734 93”/113” 4.995” 161736 80”/89”/96” 5.550”

SUG. RETAIL

58MM SINGLE-BORE MANIFOLD •Part #1050-0243 is for 58mm single-bore manifold for 124” fuel-injected Big Twin with 5.013” cylinder length and stock or S&S heads •Part #1050-0261 is for stock 06-12 Twin Cam models

$107.95 108.95

PART # 1050-0243

107.95 107.95 107.95

1050-0261

INTAKE MANIFOLD O-RINGS AND U-RINGS

DESCRIPTION For 124” fuel-injected Big Twin w/ 5.013” cylinder length For 96”, 103” and 106” 06-13 Big Twins w/ stock or S&S heads w/ 4.937” cylinder length

SUG. RETAIL $134.95 134.95

BILLET FLANGE ADAPTER FOR SPIGOT-TYPE CARBS

•For use with all current S&S intake manifolds •O-rings sold in 10-pack •U-rings sold each 1003-0060 •Made in the U.S.A.

0934-0665

PART # DESCRIPTION O-RINGS (MANIFOLD TO CYLINDER HEADS) 1003-0060 For 84-06 Big Twin and 86-06 Sportster engines w/ S&S manifold (10-pk.) 1003-0313 For stock heads (OEM #26995-86A) (10-pk.) U-RINGS (CV CARB TO MANIFOLD) 0934-0666 40-42mm 0934-0665 44-45mm

SUG. RETAIL (EA.)

$4.95 3.95 14.95 14.95

•Allows you to mount OEM late-model CV or Mikuni HSR-42 carbs on early Evolutions with two-bolt flange manifolds •CNC machined from 6061 billet aluminum •Mounting holes are 2.75” on center •Can be polished, plated or painted •Carb-to-manifold seal also available; see GASKETS & SEALS section •Sold each •Made in the U.S.A. PART # DS-289219

DESCRIPTION Billet flange adapter

SUG. RETAIL $28.95

RUBBER FLANGE ADAPTERS FOR SPIGOT-TYPE CARBURETORS •Adapters fit 38mm and 40mm spigot-type carburetors •Includes clamp •PART # M-VM-36-200 has mounting holes that are 70mm on center; i.d. of 39.5mm •PART # M-VM-38-200 has mounting holes that are 74.6mm on center; i.d. of 38mm •PART # M-VM-40-200 has mounting holes that are 74.6mm on center; i.d. of 47mm •Sold individually

BLACK FLANGE ADAPTERS

M-VM-40-200

PART # DESCRIPTION M-VM-36-200 36mm-38mm rubber flange adapter M-VM-38-200 40mm rubber flange adapter – 43mm carb spigot o.d. (fits RS40, RS42) M-VM-40-200 40mm rubber flange adapter – 52mm carb spigot o.d.

SUG. RETAIL $23.95 23.95 23.95

•Rubber flange adapters fit 42mm, 45mm and 48mm spigot-type carburetors •PART # HS42/018-42 has mounting holes that are 70mm on center; i.d. of 45mm HS42/018-42 •PART # HS42/018-45 has mounting holes that are 70mm on center; i.d. of 48mm •PART # HS42/062-48 has mounting holes that are 70mm on center; i.d. of 71mm •Includes clamp •Original straight-through design •Sold individually PART # HS42/018-42 HS42/018-45

DESC. 42mm 45mm

SUG. RETAIL $31.95 31.95

PART # HS42/062-48

DESC. 48mm

SUG. RETAIL $31.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

510

MANIFOLD SPACER KITS

1022-0060 •For use with 116” JIMS Stroker kits when fitting standard-width manifolds, such as standard CV carb, H-D Delphi EFI, Screamin’ Eagle® and S&S® •Needed because 116” Stroker kits have .100” taller cylinders that increase the distance between heads by .080” •Made in the U.S.A. PART # 1022-0061 1022-0060

DESCRIPTION For 06-13 Twin Cam For 90-05 Big Twin

SUG. RETAIL $119.95 52.95

INTAKE MANIFOLD FLANGES

1050-0232 •Sold in pair (front/rear) •Replacement seals also available •Made in the U.S.A.

CHROME INTAKE MANIFOLD FLANGES •Chrome flanges replace the stock flanges •Sold in pairs •Replacement intake manifold seals also available; see GASKETS & SEALS section PART # DS-289212

DESCRIPTION For 90-05 Big Twin and 86-06 XL models

SUG. RETAIL $25.95

INTAKE FLANGES 1003-0060

PART # DESCRIPTION SUG. RETAIL FOR 84-05 BIG TWIN AND 86-06 SPORTSTER ENGINES WITH S&S INTAKE MANIFOLD 1050-0232 Front/rear flange; repl. H-D #27009-86B and #27010-86B $19.95 (pr.) 1003-0060 Repl. seals (10-pk) 4.95 (ea.)

•CNC-machined 6061 billet aluminum construction •Will not crack or warp like some forged flanges 1022-0068 •Made in the U.S.A. PART # 1022-0068 1022-0069

DESCRIPTION For 06-13 Big Twin models For 01-05 Big Twin models

All part numbers in BLUE are new for 2013.

SUG. RETAIL $61.95 61.95


SECTION

7

WINDSHIELDS & FAIRINGS TOURING SERIES 2000 CHROME BILLET BREATHER

BILLET INTAKE FLANGES FOR SCREAMIN’ EAGLE ® THROTTLE BODIES •Made from high-strength, durable 6061 T-6 billet aluminum to increase strength and resist problematic cracking at the mounting holes •Direct replacement for the flanges included with Screamin’ Eagle 50mm throttle bodies made for 06-07 applications •Eliminate fatigue cracks and the resultant air leaks in the intake tract •Kit includes manifold seals •Made in the U.S.A.

AUDIO & COMMUNICATION

•Support brackets and breather bolts sold separately •Made in the U.S.A. PART # DS-289187

DESCRIPTION For use with H.D. Screamin’ Eagle breather kit

SUG. RETAIL $99.95

SEATS & SISSY BARS

NOTE: Legal in California only for racing vehicles which may never be used upon a highway. PART # 1022-0045

DESCRIPTION For 06-07 Screamin’ Eagle throttle bodies OEM #27623-05

EXHAUST

SUG. RETAIL $24.95

ENGINE BREATHERS

KHS-020

•Chromed, CNC-machined 6061 billet aluminum crankcase breathers screw directly into cylinder heads •Allow a clean, simple way for the engine to “breathe” correctly •Made in the U.S.A. PART # 2106-1001

LUGGAGE

KHS-030

FUEL/AIR SYSTEMS

CRANKCASE BREATHER KITS ENGINE

•Allow installation of a 40mm or 42/45mm Mikuni “Smoothbore” carburetor kit on 93-06 Big Twin with the crankcase breather system

DESCRIPTION For all 93-99 Evolution Big Twin and 91-13 XL

SUG. RETAIL $99.95

PART # KHS-020 KHS-030

DESCRIPTION For HSR42/45 carb on Evo Big Twin For HSR42/45 carb on Twin Cam

SUG. RETAIL $85.95 85.95

TRANSMISSION & DRIVELINE GASKETS & SEALS

1012-0145

ELECTRICAL 1012-0095

LIGHTING 1012-0143

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES 1012-0137

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

1012-0148

CARB SUPPORT BRACKET/BREATHER KITS •Billet aluminum construction with a chrome, black or wrinkle-black finish •Crankcase breathes back into the carb or throttle body so no external lines are necessary •Allow custom air cleaners or velocity stacks to be installed in a horizontal or vertical position; no other adapters are required •Include installation hardware •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 08-13 FLHT, FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX W/ DELPHI EFI 1012-0095 Chrome $247.95 FOR 93-06 BIG TWIN W/ 40MM CV CARB AND 01-13 BIG TWIN W/ DELPHI EFI (EXCEPT 08-13 DRESSER) 1012-0142 Chrome 188.95 1012-0143 Black 188.95 1012-0144 Wrinkle black 188.95

PART # DESCRIPTION SUG. RETAIL FOR 93-99 EVOLUTION BIG TWIN W/ S&S E OR G CARB 1012-01451 Chrome $188.95 1012-01461 Black 188.95 1012-01471 Wrinkle black 188.95 FOR 93-06 BIG TWIN W/ MIKUNI 42/45/48 CARB 1012-0148 Chrome 198.95 1012-0149 Black 198.95

All part numbers in BLUE are new for 2013.

PART # DESCRIPTION SUG. RETAIL FOR 93-06 BIG TWIN W/ MIKUNI 42/45/48 CARB (CONT) 1012-0150 Wrinkle black $198.95 FOR 91-13 XL W/ CV CARB OR DELPHI EFI 1012-0137 Chrome 207.95 1012-0138 Black 207.95 1012-0139 Wrinkle black 207.95 1

Not for 100” S&S motors.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

511


SECTION

7 1013‑0030

WINDSHIELDS & FAIRINGS

DS‑289620

TOURING AUDIO & COMMUNICATION

1013‑0036 DS‑289082 2110‑0316

CRANKCASE BREATHER/ SUPPORT BRACKET KITS

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

CRANKCASE BREATHER KIT •One‑piece chrome tube design •Comes with breather bolts, washers and hardware •Works with most aftermarket air cleaners PART # DS‑289620 2110‑0316

DESCRIPTION SUG. RETAIL For 93‑13 Big Twin (except 08‑13 Dressers) $32.95 For 91‑13 XL 29.95

•Kit allows the installation of aftermarket air cleaner assemblies on late model bikes equipped with OEM CV carb or Delphi EFI system •Includes bracket, filter, hose and all mounting hardware necessary for installation except where noted PART # DS‑289082 DS‑289060 1013‑0036 1013‑0030 DS‑289126 DS‑289073

DESCRIPTION For all 93‑12 Big Twin models (except 08‑13 Dressers) For 93‑13 Big Twin models (no hose or filter) (except 08‑13 Dressers) For 08‑13 FLHT, FLTR, FLHX, FLHR models For 07‑13 XL models For 91‑06 XL models Repl. filter

SUG. RETAIL $69.95 64.95 74.95 69.95 64.95 12.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

AIR CLEANER BREATHER KIT •Enables the mounting of most aftermarket air cleaners to late‑style engines that breathe through the cylinder heads •Fittings can be rotated 360° so that hoses can be routed as necessary •Hose sold separately

ELECTRICAL

PART # DS‑289055

LIGHTING

CARB SUPPORT BRACKET WITH BREATHER SYSTEM

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

BRAIDED HOSE CRANKCASE BREATHER KIT

DESCRIPTION For 93‑13 Big Twin and 91‑13 XL models

SUG. RETAIL $49.95

NOTE: Not recommended for stock applications. Make sure the braided line does not contact anything, i.e. the gas tank, carb or wiring, as damage may result.

1012‑0082

PART # DS‑289118

•Billet aluminum with chrome finish •Clean, one‑piece design support bracket with internal breather system •Crankcase breathes back into the carb or throttle body so no external lines are necessary •Accepts most CV/Delphi EFI‑style air cleaners •Includes installation hardware •Made in the U.S.A.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

512

DESCRIPTION For 93‑13 Big Twin custom applications only

SUG. RETAIL $66.95

CHROME CRANKCASE BREATHER

PART # DESCRIPTION FOR 93‑13 BIG TWIN (EXCEPT 08‑13 DRESSER) 1012‑0079 For S&S E/G carb, Evolution 1012‑0080 For S&S E/G carb, Twin Cam 1012‑0082 For CV carb/Delphi EFI Twin Cam 1012‑0083 For Mikuni HSR 42mm, Evolution 1012‑0084 For Mikuni HSR 42mm, Twin Cam

SUG. RETAIL $304.95 304.95 304.95 304.95 304.95

•With this breather, as oil‑laden air condenses in the breather body, the excess oil now runs back down into the engine rather than into the air cleaner •A really clean setup NOTE: Not for use on fuel‑injected models. PART # 1012‑0073 1012‑0072

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

•This kit provides the best looking alternative to black rubber hoses when mounting a crankcase breather system •Features a 3/8” i.d. stainless steel braided hose crimped onto chrome banjo fittings •Outlet side of assembly is long enough to custom‑route the hose and mount the breather filter in an inconspicuous location •Includes breather filter (with mounting stud), hardware and instructions •Air cleaner and carb support bracket must be purchased separately

DESCRIPTION For 99‑06 Twin Cam For 93‑99 Evolution Big Twin

SUG. RETAIL $62.95 63.95

BREATHER BOLT KITS 1012‑0017

1012‑0019

31/4” CUT‑TO‑LENGTH CHROME BREATHER BOLT KITS

•Solve the problem when mounting a carb support bracket •Sold in pairs •Made in the U.S.A. PART # BUTTONHEAD 1012‑0017 1012‑0018 1012‑0019

DESCRIPTION 3/8”‑16

w/ 1/2” inserts

3/8”‑16 5/16”‑18

SUG. RETAIL $67.95 $67.95 67.95

•Chrome‑plated button‑head bolts fit most support brackets and breathers •Kit for 93‑99 1012‑0038 1012‑0039 Evolution‑style engines 1 3 comes with two /2”‑13 x 1 /4” bolts, four thick aluminum washers and four stainless steel washers •Kit for 99‑13 Twin Cam‑style engines comes with two 3/8”‑16 x 13/4” coarse‑thread bolts, SUG. six stepped aluminum DESCRIPTION RETAIL washers and four stainless PART # 1012‑0039 For 99‑13 Twin Cam $49.95 steel washers 1012‑0038 For 93‑99 Evolution 39.95 •Made in the U.S.A.

All part numbers in BLUE are new for 2013.


SECTION 1012-0161

WINDSHIELDS & FAIRINGS BREATHER BOLT WASHER KIT

TWIN CAM/EVOLUTION BREATHER BOLT KITS •Chrome-plated hex-head breather bolts •Fits most supports and breather brackets •Includes sealing washers PART # 1012-0161 1012-0162

7

TOURING

•Features four 3/8” and four 1/2” aluminum centering washers •Also includes four nylon sealing washers PART # 1012-0005

1012-0162

DESCRIPTION 3/8”-16 (Twin cam) 1/2”-13 (Evolution)

SUG. RETAIL $16.95 16.95

DESCRIPTION For 91-13 breather systems

SUG. RETAIL $8.95

LUGGAGE

THREAD REDUCER •Used on 93-99 H-D cylinder heads when installing a carburetor support bracket that requires 5/16”-18 mounting bolts •Reduces a 1/2”-13 threaded hole to 5/16”-18 •Sold each; two required per motor •Made in the U.S.A. PART # 7806-2940

AUDIO & COMMUNICATION

DESCRIPTION 1/2”-13 to 5/16”-18 thread reducer

SEATS & SISSY BARS SUG. RETAIL $5.95

EXHAUST FUEL/AIR SYSTEMS

BREATHER BOLT COVERS •Hide the zinc breather bolts with these chrome-plated covers •Quick, easy upgrade; just press on and tighten the setscrew PART # 1012-0169

ENGINE

DESCRIPTION For 99-13 Twin Cam, 07-13 XL w/ Küryakyn air cleaners and crankcase breather kits

SUG. RETAIL $19.95

TRANSMISSION & DRIVELINE

BREATHER SHOP SERVICE KIT •Includes all gaskets, seals and O-ring to service OEM breather systems •Made in the U.S.A. PART # 0934-0942

GASKETS & SEALS

DESCRIPTION Breather service kit

SUG. RETAIL $9.95

ELECTRICAL

DS-289053

DS-289190

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

CARB SUPPORT BRACKET WITH CHOKE CABLE MOUNT •Chrome-plated stamped steel •Provides support for carb and air cleaner •Offers mounting of choke control under the carb for easy access PART # 2110-1212

DESCRIPTION For 92-06 Big Twin w/ Mikuni HSR 42/45 carb

CABLES

SUG. RETAIL $39.95

BRAKES TANKS & OIL FILTERS

ADJUSTABLE CARBURETOR SUPPORT BRACKET •Adjusts from 51/4” to 63/8” •Mounts from the center case bolt between cylinders to the lower flange mount of the manifold •Made in the U.S.A. PART # 160471

FRAMES, SUSPENSION & FENDERS

DS-289062

DESCRIPTION Support bracket

SUG. RETAIL $16.95

THROTTLE BODY SUPPORT BRACKET COVER

AIR CLEANER BRACES •Chrome air cleaner braces provide additional support for the Dragtron™ II air cleaners or any flat-backed air cleaners •Mount to the cylinder heads •Can be used in conjunction with most breather kits (where applicable) •Breather kits/bolts sold separately •All gaskets and mounting hardware included •For replacement gaskets, see GASKETS & SEALS section PART # DS-289190

•Adds a chrome accent to the OEM support bracket •A must-have when replacing the OEM air cleaner PART # 1013-0073

DASHES & GAUGES

1013-0017

DESCRIPTION For 08-13 FLHT/FLHR/FLTR/FLHX and H-D FL Trikes

SUG. RETAIL $49.95

DS-289053 1013-0035 1013-0017 DS-289062

DESCRIPTION For 90-13 Big Twin (except 08-13 Dressers) (CV carb/Delphi EFI) For 84-89 Big Twin Evolution (butterfly carb) For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike For 07-13 XL For 88-06 XL

All part numbers in BLUE are new for 2013.

SUG. RETAIL $33.95 24.95 29.95 29.95 24.95

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

513


SECTION

7

WINDSHIELDS & FAIRINGS TOURING

1010-1041

Chrome

Contrast Cut™

Black Ops™

AUDIO & COMMUNICATION LUGGAGE CLARITY AIR CLEANERS SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

•CNC machined from billet aluminum •Allows for viewing of the internal moving intake components •Backing plate promotes smooth airflow into the carb/throttle body •Includes high-volume K&N air filter •All mounting hardware included •Contrast Cut™ finish starts with a polished air cleaner that has been black anodized, then recut to open up the design •Black Ops™ features gloss black on top of contrasting textured black for outstanding durability and good looks •Matching Clarity derby and cam cover available •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 93-06 BIG TWIN MODELS W/ STOCK CV CARB, 01-13 SOFTAIL MODELS, 04-13 DYNA GLIDE MODELS, 02-07 FLT MODELS W/ DELPHI EFI 1010-1039 Chrome $499.95 1010-1040 Contrast Cut 499.95 1010-1041 Black Ops 499.95

PART # DESCRIPTION SUG. RETAIL FOR 93-06 BIG TWIN MODELS W/ S&S E OR G CARB 1010-1048 Chrome $499.95 1010-1049 Contrast Cut 499.95 1010-1050 Black Ops 499.95 FOR 08-13 FLT AND H-D TRIKE MODELS 1010-1042 Chrome 499.95

1010-1042 PART # DESCRIPTION SUG. RETAIL FOR 08-13 FLT AND H-D TRIKE MODELS (CONT) 1010-1043 Contrast Cut $499.95 1010-1044 Black Ops 499.95 FOR 91-13 XL W/ CV CARB/DELPHI EFI 1010-1045 Chrome 499.95 1010-1046 Contrast Cut 499.95 1010-1047 Black Ops 499.95

Speed 7 Chrome

GASKETS & SEALS ELECTRICAL

LIGHTING

Morris Black Ops™

Speed 5 Chrome

Speed 5 Contrast Cut™

HANDLEBARS, CONTROLS & MIRRORS

Speed 7 Contrast Cut™

CABLES

BRAKES VENTURI AIR CLEANERS TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

514

•Exposed filter design that enhances airflow •Backing plate promotes smooth airflow into carburetor/throttle body •Built-in internal crank case breathers •Contrast Cut™ finish starts with a polished venturi air cleaner faceplate that has been black anodized, then recut to open up the design •Platinum Cut uses the same process as the Contrast Cut™, but the recut areas are hand polished to a brilliant shine •Black Ops™ features gloss black on top of contrasting textured black for outstandingdurability and good looks •Includes high-volume air filter •All mounting hardware included •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 93-06 BIG TWIN MODELS W/ STOCK CV CARB, 01-13 SOFTAIL MODELS, 04-13 DYNA GLIDE MODELS, 02-07 FLT MODELS W/ DELPHI EFI 1010-1220 Morris, Black Ops $429.95 1010-0316 Speed 5, chrome 429.95 1010-0317 Speed 5, Contrast Cut 429.95 1010-0420 Speed 7, chrome 429.95 1010-0421 Speed 7, Contrast Cut 429.95 1010-0791 Speed 7, Platinum Cut 429.95 1010-1068 Speed 7, Black Ops 429.95 1010-0720 Mission, Contrast Cut 429.95 1010-0726 Ronin, Contrast Cut 429.95 1010-0803 Domino, Contrast Cut 429.95 1010-0807 Judge, Contrast Cut 429.95 1010-1064 Judge, Black Ops 429.95 1010-0796 Turbo, chrome 429.95

PART # DESCRIPTION SUG. RETAIL FOR 93-06 BIG TWIN MODELS W/ STOCK CV CARB, 01-13 SOFTAIL MODELS, 04-13 DYNA GLIDE MODELS, 02-07 FLT MODELS W/ DELPHI EFI (CONT) 1010-0795 Turbo, Contrast Cut $429.95 1010-0896 Boss, Black Ops 429.95 1010-0900 Boss, Contrast Cut 429.95 1010-0904 Slam, Black Ops 429.95 1010-0908 Slam, Contrast Cut 429.95 FOR 93-06 BIG TWIN MODELS W/ S&S E OR G CARB 1010-1223 Morris, Black Ops 429.95 1010-0731 Speed 5, chrome 429.95 1010-0730 Speed 5, Contrast Cut 429.95 1010-0733 Speed 7, chrome 429.95 1010-0732 Speed 7, Contrast Cut 429.95 1010-0794 Speed 7, Platinum Cut 429.95 1010-1070 Speed 7, Black Ops 429.95

All part numbers in BLUE are new for 2013.

PART # DESCRIPTION SUG. RETAIL FOR 93-06 BIG TWIN MODELS W/ S&S E OR G CARB (CONT) 1010-0734 Mission, Contrast Cut $429.95 1010-0736 Ronin, Contrast Cut 429.95 1010-0806 Domino, Contrast Cut 429.95 1010-0810 Judge, Contrast Cut 429.95 1010-1066 Judge, Black Ops 429.95 1010-0802 Turbo, chrome 429.95 1010-0801 Turbo, Contrast Cut 429.95 1010-0899 Boss, Black Ops 429.95 1010-0903 Boss, Contrast Cut 429.95 1010-0907 Slam, Black Ops 429.95 1010-0911 Slam, Contrast Cut 429.95 FOR 08-13 FLT MODELS AND H-D FL TRIKE MODELS 1010-1221 Morris, Black Ops 429.95 1010-0373 Speed 5, Chrome 429.95


SECTION VENTURI AIR CLEANERS (CONT) Mission Contrast Cut™

Ronin Contrast Cut™

Domino Contrast Cut™

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

Judge Contrast Cut™

Domino Contrast Cut™

Judge Black Ops™

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

Turbo Contrast Cut™

Boss Black Ops™

Boss Contrast Cut™

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

Slam Black Ops™

Slam Contrast Cut™

BRAKES 1011-2000

TANKS & OIL FILTERS DASHES & GAUGES

1011-1781 PART # DESCRIPTION FOR 08-13 FLT MODELS AND H-D FL TRIKE MODELS (CONT) 1010-0374 Speed 5, Contrast Cut 1010-0422 Speed 7, chrome 1010-0423 Speed 7, Contrast Cut 1010-0792 Speed 7, Platinum Cut 1010-1067 Speed 7, Black Ops 1010-0718 Mission, Contrast Cut 1010-0724 Ronin, Contrast Cut 1010-0804 Domino, Contrast Cut 1010-0808 Judge, Contrast Cut 1010-1063 Judge, Black Ops 1010-0798 Turbo, chrome 1010-0797 Turbo, Contrast Cut 1010-0897 Boss, Black Ops

SUG. RETAIL

$429.95 429.95 429.95 429.95 429.95 429.95 429.95 429.95 429.95 429.95 429.95 429.95 429.95

PART # DESCRIPTION SUG. RETAIL FOR 08-13 FLT MODELS AND H-D FL TRIKE MODELS (CONT) 1010-0901 Boss, Contrast Cut $429.95 1010-0905 Slam, Black Ops 429.95 1010-0909 Slam, Contrast Cut 429.95 FOR 91-13 XL W/ CV CARB/DELPHI EFI 1010-1222 Morris, Black Ops 429.95 1010-0402 Speed 5, chrome 429.95 1010-0403 Speed 5, Contrast Cut 429.95 1010-0424 Speed 7, chrome 429.95 1010-0425 Speed 7, Contrast Cut 429.95 1010-0793 Speed 7, Platinum Cut 429.95 1010-1069 Speed 7, Black Ops 429.95 1010-0722 Mission, Contrast Cut 429.95 1010-0728 Ronin, Contrast Cut 429.95

All part numbers in BLUE are new for 2013.

PART # DESCRIPTION SUG. RETAIL FOR 91-13 XL W/ CV CARB/DELPHI EFI (CONT) 1010-0805 Domino, Contrast Cut $429.95 1010-0809 Judge, Contrast Cut 429.95 1010-1065 Judge, Black Ops 429.95 1010-0800 Turbo, chrome 429.95 1010-0799 Turbo, Contrast Cut 429.95 1010-0898 Boss, Black Ops 429.95 1010-0902 Boss, Contrast Cut 429.95 1010-0906 Slam, Black Ops 429.95 1010-0910 Slam, Contrast Cut 429.95 REPLACEMENT/OPTIONAL COMPONENTS 1011-2000 Repl. air filter 72.95 1011-1781 Optional pre-filter style rain sock 29.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

515


SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

NOSTALGIA VENTURI AIR CLEANER

1010-1190

•RSD Nostalgia styling is finally available in our Venturi Air Cleaner •Featuring trademark RSD hotrod styling with increased ventilation in the face plates, gives the Nostalgia Air Cleaner increased levels of ventilation while keeping it classic •Design matched to the RSD Nostalgia line of products •High-volume K&N Air Filter included •Built-in crank case breathers •Slotted breather bolts and oil tubes are included with all applications •Available in Black Ops™, Contrast Cut™ and Chrome •Made in the U.S.A.

1010-1198

1010-1194

PART # DESCRIPTION SUG. RETAIL FOR 93-06 BIG TWIN MODELS W/ STOCK CV CARB, 01-13 SOFTAIL MODELS, 04-13 DYNA GLIDE MODELS, 02-07 FLT MODELS W/ DELPHI EFI 1010-1191 Contrast Cut $429.95 1010-1195 Black Ops 429.95 1010-1199 Chrome 429.95 FOR 08-13 FLT MODELS AND H-D FL TRIKE MODELS 1010-1192 Contrast Cut 429.95 1010-1196 Black Ops 429.95 1010-1200 Chrome 429.95

Nostalgia Contrast Cut™ shown mounted on an air cleaner

PART # DESCRIPTION FOR 93-06 BIG TWIN W/ S&S E/G CARB 1010-1193 Contrast Cut 1010-1197 Black Ops 1010-1201 Chrome FOR 91-13 XL 1010-1190 Contrast Cut 1010-1194 Black Ops 1010-1198 Chrome

SUG. RETAIL $429.95 429.95 429.95 429.95 429.95 429.95

Speed 7 Contrast Cut™

Speed 5 Chrome

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

Speed 7 Black Ops™

Ronin Contrast Cut™

Mission Contrast Cut™

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

516

Domino Contrast Cut™ shown VENTURI AIR CLEANER FACEPLATES mounted •Allows customer to change any existing RSD Venturi Air Cleaner faceplate to a new design on an •Contrast Cut™ finish starts with a polished Venturi Air Cleaner faceplate that has been air cleaner black anodized, then recut to open up the design •Platinum Cut uses the same process as the Contrast Cut™, but the recut areas are hand polished to a brilliant shine •Black Ops™ features gloss black on top of a contrasting textured black for outstanding durability and good looks •Specifically designed to match RSD wheels •Fit RSD Venturi air cleaners only •Made in the U.S.A. PART # 1014-0159 1014-0160 1014-0161 1014-0079 1014-0080 1014-0081

DESCRIPTION Nostalgia, Contrast Cut Nostalgia, Black Ops Nostalgia, Chrome Speed 5, Contrast Cut Speed 5, chrome Speed 7, Contrast Cut

SUG. RETAIL $149.95 149.95 149.95 149.95 149.95 149.95

PART # 1014-0082 1014-0083 1014-0125 1014-0084 1014-0085 1014-0086

All part numbers in BLUE are new for 2013.

DESCRIPTION Speed 7, Platinum Cut Speed 7, chrome Speed 7, Black Ops Mission, Contrast Cut Ronin, Contrast Cut Domino, Contrast Cut

SUG. RETAIL $149.95 149.95 149.95 149.95 149.95 149.95


SECTION VENTURI AIR CLEANER FACEPLATES (CONT)

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

Turbo Contrast Cut™ shown mounted on an air cleaner

Judge Contrast Cut™

EXHAUST

Turbo Chrome

FUEL/AIR SYSTEMS

Judge Black Ops™

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

Turbine Chrome shown mounted on an air cleaner PART # 1014-0087 1014-0124 1014-0088 1014-0089 1014-0099 1014-0100

Boss Contrast Cut™

DESCRIPTION Judge, Contrast Cut Judge, Black Ops Turbo, Contrast Cut Turbo, chrome Turbine, black Turbine, Contrast Cut

SUG. RETAIL $149.95 149.95 149.95 149.95 149.95 149.95

PART # 1014-0101 1014-0102 1014-0095 1014-0096 1014-0097 1014-0098

Slam Contrast Cut™ DESCRIPTION Turbine, chrome Turbine, Black Ops Boss, black Boss, Contrast Cut Slam, black Slam, Contrast Cut

SUG. RETAIL $149.95 149.95 149.95 149.95 149.95 149.95

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES

AIR CLEANER SCRUB BAG •Stretches over complete air cleaner to prevent water from entering engine while washing bike •Helps to keep water or other debris from entering when bike is parked •Made from waterproof denier material with an elastic enclosure •Made in the U.S.A. NOTE: Cannot be used while engine is running. For washing and storage purposes only. PART # 1011-2051

DESCRIPTION For all RSD Venturi and Turbine air cleaners

SUG. RETAIL $31.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

RAIN SOCK •Stretches over complete air cleaner for quick and easy roadside installation (no tools required) •Helps to prevent water from entering your engine when riding in wet conditions •Compatible with all RSD Venturi and Turbine air cleaner assemblies •Hydrophobic manufacturing process repels water •Filters out larger particles of debris down to .005” •Uniform micron openings allow air in while keeping debris and water out •Made in the U.S.A. PART # 1011-2050

DESCRIPTION For all RSD Venturi and Turbine air cleaners

SUG. RETAIL $29.95

All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

517


SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

SLANT CARBON FIBER AIR INTAKE KIT •Combines the best in performance and light weight with an ergo‑friendly slanted carbon fiber body •Includes carbon fiber ergo trimmed K&N filter element that is coupled with the newest backing plate shape from Vance & Hines for industry‑leading filtration •The slanted design of this kit provides more knee clearance that is easier on the rider during hard riding •Features a laser etched black anodized outer cover, black anodized backing plate with internal breathers and mounting hardware and a powder coated inlet adapter PART # 1010‑1248 •Made in the U.S.A.

SUG. RETAIL $469.95

Contrast Cut™

Black

ENGINE

DESCRIPTION For 07‑13 XL

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL Black Ops™

LIGHTING

Chrome

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

518

TURBINE AIR CLEANERS •Exposed filter design offers enhanced airflow •Backing plate promotes smooth airflow into carb/throttle body •Built‑in internal crankcase breathers •Contrast Cut™ finish starts with a polished turbine air cleaner faceplate that has been black anodized, then recut to open up the design •Black Ops™ is perhaps the toughest yet, featuring gloss black on top of a contrasting textured black finish •High‑volume K&N air filter •Laser‑engraved center nose cone •All mounting hardware included •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 93‑06 BIG TWIN MODELS W/ STOCK CV CARB, 01‑13 SOFTAIL MODELS , 04‑13 DYNA GLIDE MODELS, 02‑07 FLT MODELS W/ DELPHI EFI 1010‑0842 Black $429.95 1010‑0843 Contrast Cut 429.95 1010‑0844 Chrome 429.95 1010‑0962 Black Ops 429.95 FOR 93‑06 BIG TWIN MODELS W/ S&S E OR G CARB 1010‑0851 Black 429.95 1010‑0852 Contrast Cut 429.95 1010‑0853 Chrome 429.95 1010‑0965 Black Ops 429.95

PART # DESCRIPTION FOR 08‑13 FLT AND H‑D FL TRIKE MODELS 1010‑0845 Black 1010‑0846 Contrast Cut 1010‑0847 Chrome 1010‑0963 Black Ops FOR 91‑13 XL W/ CV CARB/DELPHI EFI 1010‑0848 Black 1010‑0849 Contrast Cut 1010‑0850 Chrome 1010‑0964 Black Ops ACCESSORIES 1011‑2000 Replacement high‑volume K&N air filter

All part numbers in BLUE are new for 2013.

1011‑2000

SUG. RETAIL $429.95 429.95 429.95 429.95 429.95 429.95 429.95 429.95 72.95


SECTION

7

WINDSHIELDS & FAIRINGS TOURING

1010-0475

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1010-0479

EXHAUST 1022-0052

FUEL/AIR SYSTEMS

1022-0052 1010-0407

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

AIR INTAKES •It’s all about how much air a motor can take in •Here are systems that work better and look better than any other systems on the market •An all-aluminum venturi in both designs helps shape the air for better flow •Hand-formed steel covers for a distinctive look that is a perfect match for any Vance & Hines exhaust system •Exhaust, fuel and now air is the complete package •Each includes a high-flow washable and reusable air filter •Made in the U.S.A. DUKE COVER PART # DESCRIPTION CHROME 1010-0475 For 01-13 Twin Cam w/ Delphi EFI (except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trikes), 99-06 Twin Cam w/ CV carb 1010-0477 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trikes 1010-0476 For 04-13 XL BLACK 1010-0478 For 01-13 Twin Cam w/ Delphi EFI (except 08-13 FLHT, FLHR, FLHX, FLTR), 99-06 Twin Cam w/ CV carb 1010-0480 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trikes 1010-0479 For 04-13 XL REPLACEMENT AIR FILTER PART # 1011-2939

SUG. RETAIL

$259.95 259.95 259.95

279.95 279.95 279.95

ELECTRICAL

LIGHTING

DRAK COVER PART # DESCRIPTION CHROME 1022-0052 For 01-13 Twin Cam w/ Delphi EFI (except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trikes), 99-06 Twin Cam w/ CV carb 1022-0055 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trikes BLACK 1010-0406 For 01-13 Twin Cam w/ Delphi EFI (except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trikes), 99-06 Twin Cam w/ CV carb 1010-0407 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trikes

DESCRIPTION Repl. filter for VO2 Air Cleaners

259.95 259.95

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

•For those wanting to keep the stock look, but not necessarily the stock performance •Vance & Hines now offers its VO2 Air Intake as a high-flow replacement kit •PART #s 1010-0738 and 1010-0739 use stock air cleaner cover; PART #s 1010-0865 and 1010-0866 must use air cleaner covers PART #s 1010-0867 or 1010-0868 •Designed and manufactured entirely in-house, the VO2 Naked includes a high-flow washable filter element, larger inlet backing plate and billet venturi to get more air in rider’s motor for more power •Made in the U.S.A.

1010-0865 1010-0866

$229.95 229.95

SUG. RETAIL $65.95

NAKED VO2 AIR INTAKES

PART # 1010-0739 1010-0738

SUG. RETAIL

1010-0866

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

1010-0738

DESCRIPTION For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models For 01-13 Twin Cam w/ Delphi EFI, 99-06 Twin Cam w/CV carb (except 08-13 Dressers, Dyna, X-Bones) For 08-13 FXD/FXDWG models For 04-13 XL models

SUG. RETAIL $139.95

HARDWARE, CHEMICALS & TOOLS

139.95 139.95 139.95

COVERS, SECURITY & GENERAL

All part numbers in BLUE are new for 2013.

519


SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION 1010-0829

1010-0828

LUGGAGE SEATS & SISSY BARS EXHAUST

1010-0828

FUEL/AIR SYSTEMS

Domino chrome

Element Platinum Cut faceplate shown mounted on air cleaner 1010-0826

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS Gatlin chrome

Heathen Contrast Cut™

Hooligan chrome

Judge chrome

Rivera Contrast Cut™

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1101-0047

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

520

Rival Contrast Cut™ shown mounted on air cleaner

Torque Contrast Cut™

Wrath Platinum Cut

1014-0050

SUPER GAS AIR CLEANERS AND UNIVERSAL FACEPLATES •Versatile design that accepts interchangeable faceplates that are designed to match Performance Machine wheels •Air cleaners include a K&N filter behind a stainless steel wire mesh screen to allow high-volume air flow, resulting in increased horsepower •Air cleaners and universal faceplates are sold separately and available in chrome, Contrast Cut™ and Platinum Cut finishes •Contrast Cut™ finish starts with a polished faceplate that has been black anodized, then recut to open up the design •Platinum Cut uses the same process as the Contrast Cut™, only the recut areas are then hand polished to a brilliant finish •Screamin’ Eagle/Ness upgrade kit adapts a Performance Machine designed faceplate to fit the Screamin’ Eagle/Arlen Ness air cleaners •Screamin’ Eagle/Ness upgrade kit includes mesh insert, spacer, hardware, and PM Logo badge •Made in the U.S.A. AIR CLEANERS PART # DESCRIPTION SUG. RETAIL FOR 93-06 BIG TWIN W/ CV CARB & 01-13 TWIN CAM W/ DELPHI EFI (EXCEPT 08-12 TOURING) 1010-0826 Black $349.95 1010-0827 Chrome 349.95 FACEPLATES/ACCESSORIES PART # DESCRIPTION DOMINO 1014-0054 Chrome ELEMENT 1014-0078 Chrime 1014-0077 Platinum Cut GATLIN 1014-0056 Contrast Cut 1014-0057 Chrome HEATHEN 1014-0058 Contrast Cut 1014-0059 Platinum Cut 1014-0060 Chrome

SUG. RETAIL $89.95 89.95 95.95 85.95 89.95 85.95 95.95 89.95

PART # DESCRIPTION SUG. RETAIL FOR 08-13 TOURING AND H-D FL TRIKE 1010-0828 Black $349.95 1010-0829 Chrome 349.95

PART # FOR 91-13 XL 1010-0830 1010-0831

PART # HOOLIGAN 1014-0061 JUDGE 1014-0063 RIVERA 1014-0064 1014-0065 RIVAL 1014-0067 1014-0068 TORQUE 1014-0070

PART # DESCRIPTION SUG. RETAIL TORQUE (CONT) 1014-0071 Platinum Cut $95.95 1014-0072 Chrome 89.95 WRATH 1014-0073 Platinum Cut 95.95 1014-0074 Chrome 89.95 ACCESSORIES/REPL. FILTER 1014-0050 Upgrade kit for Screamin’ Eagle/Arlen Ness air cleaners 25.95 1101-0047 Pre-filter 29.95 1011-2000 Repl. air filter 72.95

DESCRIPTION

SUG. RETAIL

Chrome

$89.95

Chrome

89.95

Contrast Cut Chrome

85.95 89.95

Contrast Cut Chrome

85.95 89.95

Contrast Cut

85.95

All part numbers in BLUE are new for 2013.

DESCRIPTION Black Chrome

SUG. RETAIL $349.95 349.95


SECTION

7

WINDSHIELDS & FAIRINGS 1010-1085

TOURING

1010-1089

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE SUPER GAS MERC AIR CLEANERS •CNC-machined aluminum backing plate •Air cleaners include a high-volume K&N air filter •Contrast Cut™ finish starts with a polished air cleaner that has been black anodized, then recut to open the design •Black Ops™ finish features gloss black on top of a contrasting textured black finish for outstanding durability and looks •All mounting hardware included •Made in the U.S.A. NOTE: Faceplates are not interchangeable. PART # DESCRIPTION SUG. RETAIL FOR 08-13 FLHT/FLHR/FLHX/FLTR AND H-D FL TRIKE 1010-1090 Contrast Cut $419.95 1010-1086 Chrome 419.95 1010-1094 Black Ops 419.95 FOR 93-06 BIG TWIN W/ CV CARB & 01-13 TWIN CAM W/ DELPHI EFI (EXCEPT 08-13 TOURING) 1010-1089 Contrast Cut 419.95 1010-1085 Chrome 419.95 1010-1093 Black Ops 419.95

TRANSMISSION & DRIVELINE GASKETS & SEALS 1010-1093

PART # DESCRIPTION FOR 93-06 BIG TWIN MODELS W/ S&S E OR G CARB 1010-1092 Contrast Cut 1010-1088 Chrome 1010-1096 Black Ops FOR 91-13 XL 1010-1091 Contrast Cut 1010-1087 Chrome 1010-1095 Black Ops

ELECTRICAL

SUG. RETAIL $419.95 419.95 419.95 419.95 419.95 419.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1010-0984

FAST AIR INTAKE SOLUTION

FRAMES, SUSPENSION & FENDERS

•The most innovative and aggressive-looking forward-facing air intake on the market •Features an internal crank case breather system •K&N Filter element allows for a significant horsepower increase over stock air cleaner •Available in chrome or Contrast Cut™ finishes •Includes rain sock •Made in the U.S.A.

FOOTRESTS & LICENSE PLATE FRAMES

1011-2485 1010-0985

PART # DESCRIPTION SUG. RETAIL FOR 93-06 BIG TWIN W/ CV CARB & 01-13 TWIN CAM W/ DELPHI EFI (EXCEPT 08-13 TOURING) 1010-0984 Contrast Cut $499.95 1010-0985 Chrome 499.95 FOR 93-06 BIG TWIN MODELS W/ S&S E OR G CARB 1010-0990 Contrast Cut 499.95 1010-0991 Chrome 499.95 FOR 08-13 FLHT/FLHR/FLHX/FLTR AND H-D FL TRIKE 1010-0986 Contrast Cut 499.95

PART # DESCRIPTION FOR 08-13 FLHT/FLHR/FLHX/FLTR AND H-D FL TRIKE (CONT) 1010-0987 Chrome FOR 91-13 XL 1010-0988 Contrast Cut 1010-0989 Chrome REPLACEMENT COMPONENTS 1011-2485 Rain sock 1011-2486 Air filter

All part numbers in BLUE are new for 2013.

SUG. RETAIL

WHEELS & AXLES

$499.95 499.95 499.95 33.95 64.95

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

521


SECTION

7

WINDSHIELDS & FAIRINGS

1010-1172

1010-1175

TOURING AUDIO & COMMUNICATION LUGGAGE

1010-0698 1010-1178

SEATS & SISSY BARS

1010-1184

1010-1187

1010-0561

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES

AIR CLEANER ASSEMBLIES •Machined from 6061 T-6 billet aluminum •Kit replaces the OEM air cleaner assembly, maintaining balance and symmetry •Custom-made AirRaid air filter provides increased airflow volume to the engine •Dyno-designed AirLoad backing plate reduces turbulence and increases air intake velocity, boosting horsepower and torque •Covers are triple chrome plated or textured black powdercoat with laser-cut design •Exposes more of the engine and brings out its aggressive nature •Complete hardware kit and instructions included for easy installation •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 93-06 BIG TWIN W/ CV CARB, 01-13 TWIN CAM W/ DELPHI EFI (EXCEPT 08-13 FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKES) 1010-0418 xXx, chrome $249.95 1010-0698 xXx, black 249.95 1010-1172 Standard cross, chrome 289.95 1010-1175 Standard cross, black 289.95 1010-1178 Spanish cross, chrome 289.95 1010-1181 Spanish cross, black 289.95 1010-1184 Celtic cross, chrome 289.95 1010-1187 Celtic cross, black 289.95 FOR 08-13 FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKES 1010-0561 xXx, chrome 249.95 1010-0699 XXx, black 249.95 1010-1173 Standard cross, chrome 289.95 1010-1176 Standard cross, black 289.95 1010-1179 Spanish cross, chrome 289.95 1010-1182 Spanish cross, black 289.95

1010-1182

PART # DESCRIPTION FOR 08-13 FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKES (CONT) 1010-1185 Celtic cross, chrome 1010-1188 Celtic cross, black FOR 91-13 XL W/ CV CARBURETOR OR DELPHI EFI 1010-0562 xXx, chrome 1010-0700 xXx, black 1010-1174 Standard cross, chrome 1010-1177 Standard cross, black 1010-1180 Spanish cross, chrome 1010-1183 Spanish cross, black 1010-1186 Celtic cross, chrome 1010-1189 Celtic cross, black REPLACEMENT FILTERS 1011-2052 Repl. filter for 08-13 FLHT/FLHR/FLTR/FLHX and H-D FL Trikes 1011-2053 Repl. filter for all except 08-13 FLHT/FLHR/FLTR/ FLHX and H-D FL Trikes

SUG. RETAIL $289.95 289.95 249.95 249.95 289.95 289.95 289.95 289.95 289.95 289.95

39.95 36.95

1010-1111

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

522

AFFLICTION AIR CLEANERS •Affliction has teamed up with LA Choppers to create the perfect marriage of performance and style •Backing plate machined from 6061 T-6 billet 1010-1112 aluminum and available in chrome or black •Provides quicker, smoother, stronger acceleration •Kit replaces the OEM air cleaner assembly, maintaining balance and symmetry •Custom-made AirRaid filter provides increased airflow volume to the engine •Dyno-designed AirLoad backing plate reduces turbulence and increases air intake velocity, boosting horsepower and torque •Exposes more of the engine and brings out its aggressive nature •Complete hardware kit and instructions included for easy installation •Made in the U.S.A. PART # CHROME 1010-1111 1010-1113 1010-1115 BLACK 1010-1112

DESCRIPTION

SUG. RETAIL

For 93-06 Big Twin w/ CV carb, 01-13 Twin Cam w/ Delphi EFI (except 08-13 Dresser/H-D FL Trikes) For 08-13 FLHT/FLHR/FLTR/FLHX and H-D FL Trikes For 91-13 XL w/ CV carburetor or Delphi EFI

$349.95 349.95 349.95

For 93-06 Big Twin w/ CV carb, 01-13 Twin Cam w/ Delphi EFI (except 08-13 Dresser/H-D FL Trikes)

349.95

PART # DESCRIPTION SUG. RETAIL BLACK (CONT) 1010-1114 For 08-13 FLHT/FLHR/FLTR/FLHX and H-D FL Trikes $349.95 1010-1116 For 91-13 XL w/ CV carburetor or Delphi EFI 349.95 REPLACEMENT FILTERS 1011-2052 Repl. filter for 08-13 FLHT/FLHR/FLTR/FLHX and H-D FL Trikes 39.95 1011-2053 Repl. filter for all except 08-13 FLHT/FLHR/FLTR/FLHX and H-D FL Trikes 36.95

All part numbers in BLUE are new for 2013.


SECTION

7

WINDSHIELDS & FAIRINGS

1010-1172

1010-1175

TOURING AUDIO & COMMUNICATION LUGGAGE

1010-0698 1010-1178

SEATS & SISSY BARS

1010-1184

1010-1187

1010-0561

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES

AIR CLEANER ASSEMBLIES •Machined from 6061 T-6 billet aluminum •Kit replaces the OEM air cleaner assembly, maintaining balance and symmetry •Custom-made AirRaid air filter provides increased airflow volume to the engine •Dyno-designed AirLoad backing plate reduces turbulence and increases air intake velocity, boosting horsepower and torque •Covers are triple chrome plated or textured black powdercoat with laser-cut design •Exposes more of the engine and brings out its aggressive nature •Complete hardware kit and instructions included for easy installation •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 93-06 BIG TWIN W/ CV CARB, 01-13 TWIN CAM W/ DELPHI EFI (EXCEPT 08-13 FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKES) 1010-0418 xXx, chrome $249.95 1010-0698 xXx, black 249.95 1010-1172 Standard cross, chrome 289.95 1010-1175 Standard cross, black 289.95 1010-1178 Spanish cross, chrome 289.95 1010-1181 Spanish cross, black 289.95 1010-1184 Celtic cross, chrome 289.95 1010-1187 Celtic cross, black 289.95 FOR 08-13 FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKES 1010-0561 xXx, chrome 249.95 1010-0699 XXx, black 249.95 1010-1173 Standard cross, chrome 289.95 1010-1176 Standard cross, black 289.95 1010-1179 Spanish cross, chrome 289.95 1010-1182 Spanish cross, black 289.95

1010-1182

PART # DESCRIPTION FOR 08-13 FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKES (CONT) 1010-1185 Celtic cross, chrome 1010-1188 Celtic cross, black FOR 91-13 XL W/ CV CARBURETOR OR DELPHI EFI 1010-0562 xXx, chrome 1010-0700 xXx, black 1010-1174 Standard cross, chrome 1010-1177 Standard cross, black 1010-1180 Spanish cross, chrome 1010-1183 Spanish cross, black 1010-1186 Celtic cross, chrome 1010-1189 Celtic cross, black REPLACEMENT FILTERS 1011-2052 Repl. filter for 08-13 FLHT/FLHR/FLTR/FLHX and H-D FL Trikes 1011-2053 Repl. filter for all except 08-13 FLHT/FLHR/FLTR/ FLHX and H-D FL Trikes

SUG. RETAIL $289.95 289.95 249.95 249.95 289.95 289.95 289.95 289.95 289.95 289.95

39.95 36.95

1010-1111

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

522

AFFLICTION AIR CLEANERS •Affliction has teamed up with LA Choppers to create the perfect marriage of performance and style •Backing plate machined from 6061 T-6 billet 1010-1112 aluminum and available in chrome or black •Provides quicker, smoother, stronger acceleration •Kit replaces the OEM air cleaner assembly, maintaining balance and symmetry •Custom-made AirRaid filter provides increased airflow volume to the engine •Dyno-designed AirLoad backing plate reduces turbulence and increases air intake velocity, boosting horsepower and torque •Exposes more of the engine and brings out its aggressive nature •Complete hardware kit and instructions included for easy installation •Made in the U.S.A. PART # CHROME 1010-1111 1010-1113 1010-1115 BLACK 1010-1112

DESCRIPTION

SUG. RETAIL

For 93-06 Big Twin w/ CV carb, 01-13 Twin Cam w/ Delphi EFI (except 08-13 Dresser/H-D FL Trikes) For 08-13 FLHT/FLHR/FLTR/FLHX and H-D FL Trikes For 91-13 XL w/ CV carburetor or Delphi EFI

$349.95 349.95 349.95

For 93-06 Big Twin w/ CV carb, 01-13 Twin Cam w/ Delphi EFI (except 08-13 Dresser/H-D FL Trikes)

349.95

PART # DESCRIPTION SUG. RETAIL BLACK (CONT) 1010-1114 For 08-13 FLHT/FLHR/FLTR/FLHX and H-D FL Trikes $349.95 1010-1116 For 91-13 XL w/ CV carburetor or Delphi EFI 349.95 REPLACEMENT FILTERS 1011-2052 Repl. filter for 08-13 FLHT/FLHR/FLTR/FLHX and H-D FL Trikes 39.95 1011-2053 Repl. filter for all except 08-13 FLHT/FLHR/FLTR/FLHX and H-D FL Trikes 36.95

All part numbers in BLUE are new for 2013.


SECTION

7

WINDSHIELDS & FAIRINGS

Smooth

TOURING AUDIO & COMMUNICATION Flame

Enferno

Comet

LUGGAGE SEATS & SISSY BARS EXHAUST

Pinstripe (chrome)

Pinstripe (black) Danni Doll pinup

BIG AIR KIT (BAK)

Standard cross

Spanish cross

Celtic cross

•Flow bench and dyno designed for substantially increased horsepower and torque •Features beautifully chromed billet cover in your choice of Enferno, Smooth, Flame and Comet designs, or the newest pinstripe design in choice of chrome or black powder coated cover •Innovative styling enhances and accentuates your “V” Twin engine •Set‑back, thin‑line design does not interfere with rider’s leg •Slim 11/2” hi‑flow reusable filter and specially‑designed back plate dynamically increases air flow and velocity •Maximizes overall performance and fuel efficiency •Easily supports engines producing over 120 HP •Complete with breather kit, mounting hardware and micron‑fabric rain coat for wet‑weather riding •Easy‑to‑follow instructions included for a do‑it‑yourself install •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 93‑06 BIG TWIN W/ CV CARB, 01‑13 TWIN CAM W/ DELPHI EFI (EXCEPT 08‑13 DRESSERS, H‑D FL TRIKES) 1010‑0481 Smooth $299.95 1010‑0524 Flame 299.95 1010‑0525 Comet 299.95 1010‑0526 Enferno 299.95 1010‑0566 Pin stripe (chrome) 299.95 1010‑0568 Pin stripe (black) 299.95 1010‑1164 Danni Doll pinup 399.95

PART # DESCRIPTION SUG. RETAIL FOR 93‑06 BIG TWIN W/ CV CARB, 01‑13 TWIN CAM W/ DELPHI EFI (EXCEPT 08‑13 DRESSERS, H‑D FL TRIKES) (CONT) 1010‑1166 Standard cross $299.95 1010‑1167 Spanish cross 299.95 1010‑1168 Celtic cross 329.95 FOR 08‑13 FLHT/FLHX/FLTR/FLHR AND H‑D FL TRIKE MODELS 1010‑0482 Smooth 299.95 1010‑0527 Flame 299.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

PART # DESCRIPTION SUG. RETAIL FOR 08‑13 FLHT/FLHX/FLTR/FLHR AND H‑D FL TRIKE MODELS (CONT) 1010‑0528 Comet $299.95 1010‑0529 Enferno 299.95 1010‑0567 Pin stripe (chrome) 299.95 1010‑0569 Pin stripe (black) 299.95 1010‑1165 Danni Doll pinup 399.95 1010‑1169 Standard cross 299.95 1010‑1170 Spanish cross 299.95 1010‑1171 Celtic cross 329.95

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES 1011‑2940

Danni Doll pinup

Flame Smooth

TANKS & OIL FILTERS

Enferno Comet

DASHES & GAUGES 1011‑2941

RAINCOATS FOR BAK Chrome pinstripe

Black pinstripe

Standard cross

Celtic cross Spanish cross

BAK REPLACEMENT COVERS •For those wanting to alter the look of their BAK •Cover only, does not include hardware PART # 1014‑0076 1014‑0146 1014‑0147 1014‑0148 1014‑0149

DESCRIPTION Danni Doll pinup Smooth Flame Comet Enferno

SUG. RETAIL $219.95 119.95 119.95 119.95 119.95

PART # 1014‑0152 1014‑0153 1014‑0154 1014‑0155 1014‑0156

DESCRIPTION Chrome pinstripe Black pinstripe Standard cross Spanish cross Celtic cross

SUG. RETAIL $119.95 119.95 119.95 119.95 139.95

All part numbers in BLUE are new for 2013.

•Protect your BAK filter from moisture and dust •BAK filters are water resistant, but extended riding in rain is not recommended •Classic fits 2” W filter •Slim fits 11/2” filter •Will also work on any filter kit that uses a K&N E‑3333 filter (does not fit K&N billet filter kits) PART # 1011‑2940 1011‑2941

DESCRIPTION Classic Slim

SUG. RETAIL $19.95 19.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

523


SECTION

7 1010-0675

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

1010-0673

TRI-BAR AIR FILTER KITS LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

•Stylish, clean custom look that complements the Battistinis collection of products •Kits include a patented Arlen Ness Stage-1 Big Sucker air filter kit with a unique-design billet outer cover •Available in show-winning chrome or black anodized with re-machined highlights 1010-0676 •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 99-06 TWIN CAM CV CARB AND 01-13 TWIN CAM DELPHI EFI MODELS (EXCEPT 08-13 FLHT, FLHR, FLHX, FLTR, H-D FL TRIKE) 1010-0672 Chrome $399.95 1010-0673 Black anodized 399.95 FOR 08-13 FLHT, FLHR, FLHX, FLTR AND H-D FL TRIKE 1010-0674 Chrome 399.95 1010-0675 Black anodized 399.95

1010-0926

PART # FOR 91-13 XL 1010-0684 1010-0685 COVERS 1010-0676 1010-0677

1010-0927

DESCRIPTION

SUG. RETAIL

Chrome Black anodized

$399.95 399.95

Chrome Black anodized

299.95 299.95

1010-0928

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

524

1010-0929

1010-1010

HIGH-PERFORMANCE AIR CLEANER ASSEMBLIES •Super-clean design features all-CNC-machined billet 1010-0941 aluminum construction throughout •Equipped with a genuine K&N 4” diameter high-flow filter •Has Joker’s exclusive “baffle plate” crankcase breathing system, held all together with high-strength 12-point alloy mounting bolts •Improves leg clearance over the stock air cleaner assembly due to its compact design •Available in your choice of hard black anodized or chrome-plated finishes •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 99-06 TWIN CAM W/ CV CARB AND 01-13 TWIN CAM W/ DELPHI EFI (EXCEPT 08-13 FLHT/FLHR/FLHX/FLTR AND HD FL TRIKE) 1010-0926 Smooth black anodized $289.95 1010-0927 Smooth chrome 299.95 1010-0928 Finned black anodized 289.95 1010-0929 Finned chrome 299.95 1010-1007 Joker Racing, black anodized 289.95 1010-1008 Joker Racing, chrome 299.95 1010-1010 JM U.S.A., black anodized 299.95 FOR 07-13 XL MODELS W/ EFI 1010-0930 Finned black anodized 249.95 1010-0931 Finned chrome 259.95 1010-0941 Joker Racing, black anodized 249.95

1010-0942

PART # DESCRIPTION FOR 07-13 XL MODELS W/ EFI (CONT) 1010-0942 Joker Racing, chrome 1010-0692 Smooth, black anodized 1010-0693 Smooth, chrome 1010-0694 Smooth, clear anodized FOR 91-06 XL MODELS W/ CV CARB 1010-0932 Finned black anodized 1010-0933 Finned chrome 1010-0943 Joker Racing, black 1010-0944 Joker Racing, chrome 1010-0695 Smooth, black anodized 1010-0696 Smooth, chrome 1010-0697 Smooth, clear anodized

SUG. RETAIL $259.95 249.95 259.95 249.95 249.95 259.95 249.95 259.95 249.95 259.95 249.95

RAIN SOCK FOR JOKER AIR CLEANERS •Water-repellent prefilter custom-made by Outerwears for riding in rainy weather •Fits all Joker Machine air cleaners with 4” K&N filters •Easy installation – attaches with hook-and-loop for easy installation and removal •Made in the U.S.A. PART # 1011-2938

DESCRIPTION Air filter rain sock

All part numbers in BLUE are new for 2013.

SUG. RETAIL $12.95


SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

1010-1009 1010-0934

1010-0935

LUGGAGE

1010-0937

SEATS & SISSY BARS

1010-0936

EXHAUST 1010-0938

FUEL/AIR SYSTEMS HIGH-PERFORMANCE DIAMOND AIR CLEANER ASSEMBLIES

ENGINE

•Super-clean design features all CNC-machined billet aluminum construction throughout 1010-0939 •Equipped with a genuine K&N 4” diameter high-flow filter •Has Joker’s exclusive “baffle plate” crankcase breathing system held all together with high-strength 12-point alloy mounting bolts •Improves leg clearance over the stock air cleaner assembly due to its compact design •Available in hard black anodized and chrome finishes •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 99-06 TWIN CAM W/ CV CARB AND 01-13 TWIN CAM W/ DELPHI EFI (EXCEPT 08-13 FLHT/FLHR/FLHX/FLTR AND HD FL TRIKE) 1010-0934 Finned, black $289.95 1010-1009 Finned, chrome 299.95 1010-0935 Smooth, black 289.95 1010-0936 Behind the 8 Ball, black 289.95 1010-0937 JM U.S.A., black 289.95 1010-0938 Money to Burn, black 289.95 1010-0939 Joker, black 289.95 1010-0940 Lucky 7, black 289.95 FOR 07-13 XL MODELS W/ EFI 1010-0945 Finned, black 259.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1010-0940

PART # DESCRIPTION FOR 07-13 XL MODELS W/ EFI (CONT) 1010-0946 Finned, chrome 1010-0949 JM U.S.A., black 1010-0951 Joker, black 1010-0953 Smooth, black FOR 91-06 XL MODELS W/ CV CARB 1010-0947 Finned, black 1010-0948 Finned, chrome 1010-0950 JM U.S.A., black 1010-0952 Joker, black 1010-0954 Smooth, black

SUG. RETAIL $269.95 259.95 259.95 259.95 259.95 269.95 259.95 259.95 259.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES 1010-1017

1010-1018

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

X-Wing design

FOOTRESTS & LICENSE PLATE FRAMES POWER X INTAKE •Air is power and Boyesen has channeled that power like never before •Patented X-Wing design for more power and acceleration; X-Wing venturi increases air speed for added throttle response •Complete kit includes backing plate with internal breather passageways, filter and mounting hardware •Oil-free/washable filter is a poly cotton blend with an extra-large filter area for increased airflow; filters to 40 microns •Available in polished silver or matte black finish •Accepts stock air filter cover PART # DESCRIPTION FOR 08-13 FLHT, FLHR, FLHX, FLTR AND H-D FL TRIKE MODELS 1010-1017 Polished silver

SUG. RETAIL $229.95

PART # DESCRIPTION SUG. RETAIL FOR 08-13 FLHT, FLHR, FLHX, FLTR AND H-D FL TRIKE MODELS (CONT) 1010-1018 Matte black $229.95

All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

525


SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

CORSAIR AIR CLEANER KITS

1010-0344

•Aggressively styled, free-flowing high-performance air cleaner 1010-0560 •Chrome-plated die-cast housing features a high-flow air filter element supplied by Advanced Flow Engineering (aFe) for maximum performance, includes crankcase breather support bracket and all necessary installation hardware and brackets •Will support engines making in excess of 100 horsepower •Air cleaner extends approximately 6” straight out and 121/2” forward of the engine •PART #1010-0345 is a Corsair assembly (CV bolt pattern) for use with custom adapters, brackets, etc. for custom installation on models for which a complete kit is not offered NOTE: Installation of this air cleaner may decrease rider legroom.

EXHAUST

PART # 1010-0560 1010-0344

FUEL/AIR SYSTEMS

DESCRIPTION For 08-13 FLHT/FLHR/FLTR/FLHX and H-D FL Trikes For 93-99 Evolution Big Twin w/ CV carb, 99-13 Twin Cam w/ CV carb or Delphi fuel injection (except 08-13 FLHT, FLHR, FLTR and FLHX)

SUG. RETAIL $299.95

299.95

1010-0220

PART # 1010-0343 1010-0345 1011-1380 1011-1381

DESCRIPTION For 91-06 XL w/ CV carb Corsair air cleaner assembly only Repl. air filter element Repl. pre-filter element

SUG. RETAIL $299.95 289.95 69.95 32.95

1010-0218

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS SKULL AIR CLEANER KITS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

•Extremely rigid, high-strength composite construction •Includes outer cover, backing plate, high-flow air filter element and all necessary brackets, crankcase breathers and other required hardware included •Chrome or gloss black finish available •Sold each PART # CHROME 1010-0220 1010-1001 1010-0218 1010-1060

DESCRIPTION

SUG. RETAIL

For 99-13 Twin Cam w/ CV carb or Delphi EFI (except 08-13 FLHT, FLHR, FLTR, FLHX and H-D FL Trikes) For 08-13 FLHT, FLHR, FLTR, FLHX and H-D FL Trikes For 91-06 XL models w/ CV carb For 07-13 XL

1010-0342

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

526

$239.95 239.95 239.95 239.95

1010-1060

1010-1062

PART # DESCRIPTION SUG. RETAIL GLOSS BLACK 1010-1061 For 99-13 Twin Cam w/ CV carb or Delphi EFI (except 08-13 FLHT, FLHR, FLTR, FLHX and H-D FL Trikes) $269.95 1010-1062 For 08-13 FLHT, FLHR, FLTR, FLHX and H-D FL Trikes 269.95 REPLACEMENT PARTS 1011-2909 Repl. air filter for all Skull air cleaners 72.95

TWIN VELOCITY™ PLUS AIR CLEANER KITS •Slots on both sides and enlarged openings at bottom of housing allow more air to enter the filter •Large, round breather element underneath cover allows air to enter the end of the filter •Teardrop center of cover provides improved airflow and a clean look •Internal crankcase vent system directs gasses and oil droplets into the carburetor induction module, eliminating a mess on the outside of the engine •The result is improved airflow for better performance •Carb adapter and replacement K&N air filter elements sold each •Available with a chrome finish SUG. PART # DESCRIPTION TWIN VELOCITY PLUS AIR CLEANERS 1010-0342 For 99-13 Twin Cam w/ stock CV carb or Delphi fuel inejction (except 08-13 FLHT, FLHR, FLTR, FLHX and H-D FL Trike) 1010-0341 For 93-99 Evolution Big Twin w/ stock CV carburetor ACCESSORIES DS-289240 Adapter for S&S carbs for 90-99 Evolution Big Twin 1013-0022 Adapter for Mikuni HSR 42/54/48 carburetor for 93-06 Evolution or Twin Cam DS-288862 Repl. primary K&N filter element DS-288863 Repl. secondary K&N filter element

All part numbers in BLUE are new for 2013.

RETAIL

$229.95 229.95 52.95 46.95 59.95 11.95


SECTION

7

WINDSHIELDS & FAIRINGS TOURING

1010-0213

AUDIO & COMMUNICATION PRO R HYPERCHARGER™

LUGGAGE

•The best-flowing Hypercharger™ ever produced •Careful redesign of all interior shapes increases airflow •Additional air scoop on outer cover directs air onto the high-flow, washable and reusable air filter •Unrestricted air under high-load riding situations from huge front butterflies are vacuum operated •Include all necessary mounting hardware and crankcase breather kit •PART #1010-0217 is an assembly (CV bolt pattern) that can be used with adapters, brackets or mounting kits to cover applications that do not have a specific kit PART # DESCRIPTION SUG. RETAIL 1010-0215 For 99-06 Twin Cam w/ CV carb and 06-13 w/ Delphi EFI (except 08-13 FLHT, FLHR, FLTR, FLHX and H-D FL Trikes) $329.95 1010-1004 For 08-13 FLHT/FLHR/FLTR/FLHX and H-D FL Trikes 329.95 1010-0216 For 01-05 Twin Cam w/ Delphi EFI 329.95 1010-0214 For 93-99 Evolution Big Twin w/ CV carb 299.95 1010-0213 For 91-06 XL models w/ CV carb 299.95 1010-1058 For 07-13 XL 299.95

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE PART # DESCRIPTION 1010-0217 Pro R cleaner assembly only 1011-1079 Repl. K&N air filter (ea.)

SUG. RETAIL $279.95 59.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1010-1003

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

DS-288938

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

DS-288939

PRO SERIES HYPERCHARGER™ •Features a 50% larger air filter for massive airflow •Internal shape has been modified to allow increased airflow and velocity •One-piece construction, ball-milled, “speed lines” symmetrical butterflies and new “Pro” embossed bearing cups •Edges of Pro Series Hypercharger are radiused for a more streamlined appearance •An upgrade kit is available for new-style (replaceable bearing cup) Hyperchargers and includes a new “Pro” outer case half, bearing cups, butterflies, large K&N air filter and necessary hardware PART # 1010-0151 DS-288938 1010-1003 1010-0147 1010-0149 1010-0150 DS-288937 DS-288936 1010-1057 DS-288939

DESCRIPTION W/ chrome butterflies for 01-05 Twin Cam w/ Delphi EFI W/ chrome butterflies for 99-06 Twin Cam w/ CV carb, 01-13 Delphi EFI (except 08-13 FLHT, FLHR, FLTR, FLHX and H-D FL Trikes) W/ chrome butterflies for 08-13 FLHT/FLHR/FLTR/FLHX and H-D FL Trikes W/ black butterflies for 99-06 Twin Cam w/ CV carb, 01-13 Delphi EFI (except 08-13 FLHT, FLHR, FLTR, FLHX and H-D FL Trikes) W/ chrome butterflies for 99-01 FLT (Dresser and Road King) w/ Magnetti-Marelli EFI W/ chrome butterflies for 95-98 FLT (Dresser and Road King) w/ Magnetti-Marelli EFI W/ chrome butterflies for 93-99 80” Evolution w/ CV carb W/ chrome butterflies for 91-06 XL w/ CV carb W/ chrome butterflies for 07-13 XL Upgrade kit

All part numbers in BLUE are new for 2013.

SUG. RETAIL $299.95 289.95 289.95 289.95 299.95 299.95 289.95 289.95 289.95 139.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

527


SECTION

7

WINDSHIELDS & FAIRINGS 1010‑1002

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE DS‑288821

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

528

1012‑0170

HYPERCHARGER™ AIR CLEANERS •These air cleaners look great and work even better •Outstanding performance on stock or mildly modified engines up to 90 horsepower •Available with a standard (smooth) trap door or our Blood Groove design •Chrome‑plated body and trapdoor with either chrome or black butterflies •Provide excellent legroom for comfort while riding •Include Küryakyn’s breather where applicable

1010‑1006

PART # DESCRIPTION HYPERCHARGER WITH SMOOTH TRAP DOOR 1010‑0156 W/ chrome butterflies for 99‑06 Twin Cam w/ CV carb, 06‑13 Delphi EFI (except 08‑13 FLHT, FLHR, FLTR, FLHX and H‑D FL Trike) 1010‑0157 W/ chrome butterflies for 01‑05 Twin Cam w/ Delphi EFI 1010‑0136 W/ chrome butterflies for 93‑99 Big Twin w/ S&S E or G series carb 1010‑0139 W/ chrome butterflies for 93‑99 Big Twin w/ stock carb and Screamin’ Eagle breather 1010‑0140 W/ chrome butterflies for 93‑99 Big Twin w/ stock carb 1010‑0144 W/ chrome butterflies for 92 Big Twin w/ stock carb 1010‑0143 W/ chrome butterflies for 90‑91 Big Twin w/ stock carb 1010‑0142 W/ chrome butterflies for 84‑89 Big Twin w/ stock or S&S B series carb 1010‑0155 W/ chrome butterflies for 95‑98 Evolution Road King or Dresser w/ Magnetti‑Marelli EFI 1010‑0137 W/ chrome butterflies for 91‑06 XL w/ stock carb and H‑D breather 1010‑0141 W/ chrome butterflies for 91‑06 XL w/ stock carb 1010‑0135 W/ chrome butterflies for 88‑90 XL w/ stock carb 1010‑0138 W/ metallic gray butterflies for 94‑02 Buell w/ stock carburetor (requires mount kit 1010‑0230) HYPERCHARGER WITH BLOOD GROOVE TRAP DOOR DS‑288845 W/ chrome butterflies for 99‑01 FLTR, FLHT, FLHR w/ Magnetti‑Marelli EFI DS‑288844 W/ chrome butterflies for 99‑06 Twin Cam w/ CV carb, 06‑13 Delphi EFI (except 08‑13 FLHT, FLHR, FLTR, FLHX and H‑D FL Trike) 1010‑1002 W/ chrome butterflies for 08‑13 FLHR, FLHT, FLHX, FLTR and H‑D FL Trikes 1010‑0162 W/ chrome butterflies for 01‑05 Twin Cam w/ Delphi EFI 1010‑0161 W/ black butterflies for 99‑06 Twin Cam w/ CV carb, 06‑13 Delphi EFI (except 08‑13 FLHT, FLTR, FLHR FLHX and H‑D FL Trike) DS‑288821 W/ chrome butterflies for 93‑99 Evolution Big Twin w/ stock carb DS‑288822 W/ black butterflies for 93‑99 Evolution Big Twin w/ stock carb DS‑288940 W/ chrome butterflies for 93‑99 80” Evolution w/ S&S E & G carb DS‑288823 W/ chrome butterflies for 91‑06 XL models w/ stock carb 1010‑0163 W/ chrome butterflies for 91‑06 XL w/ stock carb and Screamin’ Eagle crankcase breather DS‑288824 W/ black butterflies for 91‑06 XL models w/ stock carb HYPERCHARGER ACCESSORIES DS‑288827 Adapter to mount Hypercharger on S&S E and G carburetors for 93‑99 Big Twin and 91‑06 XL models (requires PART #DS‑288826 adjustable enrichener and 1/2”‑13 x 11/2” breather bolts) DS‑288826 Adjustable enrichener for S&S E and G carbs on 93‑99 Big Twin and 91‑06 XL models 1010‑0146 Chrome blood groove trap door 1010‑1006 Gloss black blood groove trap door 1010‑0327 Candy red trap door 1010‑0328 Candy blue trap door 1010‑0329 Chrome trap door 1010‑0347 Black trap door 1010‑0330 Candy red butterflies 1010‑0331 Candy blue butterflies 1010‑0332 Chrome butterflies 1010‑0348 Black butterflies DS‑288825 Repl. K&N filter element for Hyperchargers listed above 1012‑0170 Repl. rubber boots and hoses for Evolution crankcase breather kit

All part numbers in BLUE are new for 2013.

SUG. RETAIL $249.95 289.95 289.95 229.95 239.95 229.95 229.95 229.95 269.95 229.95 239.95 229.95 199.95 289.95 259.95 259.95 289.95 269.95 269.95 269.95 299.95 269.95 239.95 269.95

49.95 21.95 25.95 24.95 19.95 19.95 21.95 19.95 15.95 15.95 15.95 15.95 45.95 8.95


SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS STINGER TRAP DOOR FOR HYPERCHARGER™

ENGINE

•If you have a need for more performance, look no further •Stinger trap door maximizes airflow into the carburetor or throttle body through a high‑flow filter element •Highly cost‑effective way to boost airflow to any standard Hypercharger •Easy four‑bolt replacement for standard trap door •Chrome finish PART # 1010‑0145

DESCRIPTION Stinger trap door (ea.)

TRANSMISSION & DRIVELINE

STREET SLEEPER AIR CLEANER KIT •Gain performance but keep the stock look with this high‑flow air cleaner backplate •Re‑uses stock outer air cleaner cover •Allows up to 40% more airflow with air filter designed by K&N •Can support airflow for engines making up to 130 horsepower

SUG. RETAIL $59.95

PART # 1010‑1059

DESCRIPTION For 99‑13 Twin Cam w/ CV carb or Delphi EFI (except FLHT, FLHR, FLTR, FLHX and H‑D FL Trikes)

GASKETS & SEALS SUG. RETAIL $179.95

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES HYPER STREAMLINER •Gives your Hypercharger™ a whole new look •Beautifully designed insert installs in minutes without any performance loss •Fits all Hyperchargers (except Pro Series Hyperchargers) PART # 1014‑0001

DESCRIPTION Hyper Streamliner

BRAKES

SUG. RETAIL $39.95

TANKS & OIL FILTERS

INFINITY STREAMLINER FOR HYPERCHARGER™

DASHES & GAUGES

•Transform this cover from smooth chrome to a stunning LED vortex of lights with just a flick of the switch •Seven‑color LED operates in three modes: single color steady illumination; single color flashing illumination with rheostat‑adjustable rate; and paint mode – continuously fading in and out of seven colors (red, lime, ice blue, sky blue, dark blue, purple and green) with rheostat‑adjustable rate of color change •Installs on any standard Hypercharger air cleaner (except Pro R, Pro Series Hypercharger) •Not for use with Stinger trap door PART # 1014‑0130

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS DESCRIPTION Streamliner Infinity cover for Hypercharger™

All part numbers in BLUE are new for 2013.

SUG. RETAIL $199.95

COVERS, SECURITY & GENERAL

529


SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE

HIGH PERFORMANCE 6” DRAGTRON™ II AIR CLEANER •Dynamometer-designed radius entry backing plate maximizes air flow and horsepower •2” washable filter is encased in a heavy stainless steel mesh and is easily serviced •Available in chrome finish •Stainless steel hardware is included •Replacement filters available; see page 553 NOTE: Support brackets and breather kits are sold separately.

SEATS & SISSY BARS

U.S. Design Patent #305,149; Taiwan Patent pending. PART # DS-289044

DESCRIPTION For 90-06 Big Twin, 88-06 XL (CV carbs) (Delphi EFI applications will require adapters PART #s 1010-0552 or 1010-0553; sold separately)

1010-1032

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

SUG. RETAIL $89.95

DOUBLE SHOT AIR FILTER KITS •Features a molded backing plate that improves air flow •Smooth cast aluminum cover wraps in at rear for rider comfort •Uses stock vent system •Chrome covers include a black insert sticker •K&N air filter and hardware included •Made in the U.S.A.

1010-1029

PART # DESCRIPTION SUG. RETAIL FOR 01-13FXST/FLST, 04-13 FXD/FXDWG AND 02-07 FLHT/FLHR/FLHX/FLTR MODELS W/ DELPHI EFI 1010-1031 Chrome $292.95 1010-1032 Black powder-coat 292.95

PART # DESCRIPTION FOR 08-13 FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKE MODELS 1010-1029 Chrome 1010-1030 Black powder-coat

SUG. RETAIL $292.95 292.95

ELECTRICAL 1010-0450 1010-0270

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES 1010-0298

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

530

MO-FLOW™ BILLET AIR CLEANERS •Made from aluminum, polished and chrome-plated 1010-0834 •Available in gloss black, chrome or wrinkle black powder-coated •Hidden fasteners and internal breather assembly make for a clean look •Each air cleaner assembly contains a reusable pleated gauze performance filter that has been engineered and flow tested to obtain maximum flow and protection for your motor •Seal breather assembly velocity plate and all necessary mounting hardware included •This product can be used for any street or racing application where you want maximum performance for the state of California; EO #D-668 •Optional hardware kits available separately and only work with Cycle Visions Mo-Flow air cleaners NOTE: Adapter for Mikuni carbs sold separately. PART # DESCRIPTION GLOSS BLACK 1010-0450 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trikes 1010-04451 For 99-06 Twin Cam w/ CV or HSR Mikuni carb, 01-13 Twin Cam w/ Delphi EFI (except 08-13 Dressers) 1010-04441 For 93-99 Evolution Big Twin w/ CV or HSR Mikuni carbs 1010-04461 For 91-13 XL w/ CV carb or HSR Mikuni carb/Delphi EFI CHROME 1010-0349 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trikes 1010-02701 For 99-06 Twin Cam w/ CV or HSR Mikuni carb, 01-13 Twin Cam w/ Delphi EFI (except 08-13 Dressers) 1010-02101 For 93-99 Evolution Big Twin w/ CV or HSR Mikuni carbs 1010-0272 For 93-99 Evolution Big Twin w/ S&S E or G carb 1010-02121 For 91-13 XL w/ CV carb or HSR Mikuni carb/Delphi EFI

SUG. RETAIL $299.95 299.95 299.95 299.95 299.95 299.95 299.95 299.95 299.95

PART # DESCRIPTION WRINKLED BLACK POWDER-COAT 1010-0350 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trikes 1010-03011 For 99-06 Twin Cam w/ CV or HSR Mikuni carb, 01-13 Twin Cam w/ Delphi EFI (except 08-13 Dressers) 1010-02981 For 93-99 Evolution Big Twin w/ CV or HSR Mikuni carbs 1010-03001 For 91-13 XL w/ CV carb or HSR Mikuni carb/Delphi EFI REPLACEMENT HARDWARE KITS 1010-0834 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trikes 1010-0832 For 93-99 Evolution Big Twin (all) 1010-0832 For 91-13 XL (all) 1010-0833 For 99-06 Twin Cam (all) REPLACEMENT AIR FILTER 1011-2002 Repl. air filter 1

Requires adapter for Mikuni, PART #HS42/001-K, SUG. RETAIL $18.95.

All part numbers in BLUE are new for 2013.

SUG. RETAIL $299.95 299.95 299.95 299.95 36.95 36.95 36.95 36.95 59.95


SECTION

7

WINDSHIELDS & FAIRINGS 1010-0860

TOURING 1010-0715

AUDIO & COMMUNICATION LUGGAGE

MOTO INTAKE KITS

SEATS & SISSY BARS

1010-0860

•CNC-machined aluminum construction •Increases airflow while maintaining a low profile •Cleanable/reusable proprietary air filter has over 130 sq. in. of filter element •Internal velocity stack with internal breathers breathe directly back into venturi •Made in the U.S.A. PART # DESCRIPTION FOR 08-13 TOURING AND H-D FL TRIKE MODELS 1010-0860 Chrome 1010-0861 Black anodized FOR 93-06 BIG TWIN WITH S&S E & G CARBS 1010-0862 Chrome 1010-0863 Black anodized

SUG. RETAIL $371.95 371.95 371.95 371.95

PART # DESCRIPTION FOR 93-06 BIG TWIN WITH STOCK CV CARB, 01-13 SOFTAIL, 04-13 DYNA, 02-07 FLT, FLHT WITH DELPHI EFI 1010-0714 Chrome 1010-0715 Black anodized FOR 93-06 BIG TWIN WITH MIKUNI HSR 42MM CARBS 1010-0712 Chrome 1010-0713 Black anodized

EXHAUST SUG. RETAIL

$371.95 371.95 371.95 371.95

ENGINE TRANSMISSION & DRIVELINE

1010-0038

FINNED AIR CLEANERS

GASKETS & SEALS

•Unique style allows the engine to show through the teardrop silhouette •Chrome-plated billet aluminum construction •Features a K&N washable filter element for performance and long life •For popular carburetors; mounting brackets available separately •Matching finned horn PART #2107-0009 is available separately •Made in the U.S.A.

ELECTRICAL

NOTE: Mounting bracket must be purchased separately. PART # DESCRIPTION SUG. RETAIL FINNED AIR CLEANERS 1010-0038 For 93-06 Big Twin and 91-06 XL w/ CV carbs $464.95 1010-0039 For 01-13 Big Twin w/ Delphi fuel injection (except 08-13 Dressers and H-D FL Trikes) 464.95 1010-0040 For 93-06 Big Twin and 91-06 XL w/ S&S Super E and G carburetors 464.95 1010-0864 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trikes 464.95

FUEL/AIR SYSTEMS

LIGHTING

PART # DESCRIPTION MOUNTING BRACKETS 1013-0001 For 91-06 XL 1013-0002 For 93-13 Big Twin

SUG. RETAIL $47.95 51.95

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

AIR CLEANER KIT •Solid billet aluminum backing plate with built-in breather mounts •High-quality heavy-duty construction to prevent cracking under high horsepower applications •Black anodized finish •O-ring grooves eliminate time-consuming shimming and oil leaks found in other backing plates •Use stock or aftermarket air cleaner cover •Includes premium cleanable/reusable air filter, gaskets, O-rings and hardware •Made in the U.S.A. PART # 1010-0741

DESCRIPTION For all JIMS elliptical throttle bodies and Screamin’ Eagle Pro Super Bore 51mm CV carb, black

All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS SUG. RETAIL $336.95

COVERS, SECURITY & GENERAL

531


SECTION

7

WINDSHIELDS & FAIRINGS 1010-1202

1010-1203

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

1010-1208

GASKETS & SEALS 1010-1215

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

532

INVERTED SERIES AIR CLEANER KITS •The ultimate combination of performance and design for your V-Twin engine •Inverted pleated top with pleated sides to maximize airflow •Our pre-oiled black filter element is encapsulated in a stainless steel jacket for the ultimate in style and durability •Forged air filter housings feature built-in velocity stacks that scream performance and enhance looks •Forged billet backing plate features our proven radius inlet, hidden breather hardware and our industry leading Big Sucker patented technology •Available in chrome or black anodized finishes •All mounting hardware and gaskets are included •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 08-13 FLHT/FLHR/FLHX/FLTR/H-D TRIKE MODELS 1010-1202 Slot Track, chrome $399.95 1010-1203 Slot Track, black anodized 399.95 1010-1208 Deep Cut, chrome 399.95 1010-1209 Deep Cut, black anodized 399.95 1010-1214 Bevelled, chrome 399.95 1010-1215 Bevelled, black anodized 399.95 FOR 99-06 TWIN CAM CV CARB, 01-13 TWIN CAM DELPHI EFI MODELS (EXCEPT 08-13 FLHT/FLHR/FLHX/FLTR/H-D TRIKE) 1010-1204 Slot Track, chrome 399.95 1010-1205 Slot Track, black anodized 399.95 1010-1210 Deep Cut, chrome 399.95 1010-1211 Deep Cut, black anodized 399.95 1010-1216 Bevelled, chrome 399.95 1010-1217 Bevelled, black anodized 399.95

PART # DESCRIPTION FOR 88-13 XL 1010-1206 Slot Track, chrome 1010-1207 Slot Track, black anodized 1010-1212 Deep Cut, chrome 1010-1213 Deep Cut, black anodized 1010-1218 Bevelled, chrome 1010-1219 Bevelled, black anodized REPLACEMENT AIR FILTER 1011-2942 Repl. air filter

All part numbers in BLUE are new for 2013.

SUG. RETAIL $399.95 399.95 399.95 399.95 399.95 399.95 64.95


SECTION

7

WINDSHIELDS & FAIRINGS

1010-0621

TOURING AUDIO & COMMUNICATION 1010-0187

LUGGAGE 1010-0187

SEATS & SISSY BARS

DS-288885

1010-0617

EXHAUST FUEL/AIR SYSTEMS ENGINE “BILLET SUCKER” AIR CLEANER ASSEMBLIES •Available in Stage I and Stage II •Both feature an oversize exposed filter design for tremendous airflow •One-piece aluminum backing plate with patented hidden breather technology and radius air inlet for maximum airflow •Breather passages exit at the mouth of the carb/throttle body, creating a virtually closed-loop system •Eliminates the need for any external banjo fittings, hoses, and breather filters for an ultra clean look •Kits include a high-flow air filter, outer cover, backing plate/support bracket and all necessary hardware •Made in the U.S.A. PART # STAGE I KITS 1010-0355 1010-0357 1010-0613 1010-0186 1010-0187 1010-0614 1010-0615 1010-06161 STAGE II KITS 1010-0356 1010-0358 1010-0621 1010-0359 1010-0617 1010-0188 1010-0189 1010-0622 1010-0190 1010-0618 DS-288885 1010-0066 1010-0623 DS-288884 1010-0619 1010-0065 1010-0596 1010-0595 1010-00641 1010-06241 1010-00621 1010-06201 1

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL DS-288884

DESCRIPTION

SUG. RETAIL

Smooth, for 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models (chrome) Scalloped, for 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models (chrome) Scalloped, for 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models (black/raw) Smooth, for all 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models (except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike) (chrome) Scalloped, for all 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models (except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike) (chrome) Scalloped, for all 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models (except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike) (black/raw) Scalloped, for all 93-99 Evolution Big Twin models w/ CV carb, (black/raw) Scalloped, for 91-13 XL models w/ CV carb or Delphi EFI (black/raw) Smooth, for 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models (chrome) Scalloped, for 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models (chrome) Scalloped, for 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models (black/raw) Grooved, for 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models (chrome) Retro, for 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models (chrome) Smooth, for all 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models (except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike) (chrome) Scalloped, for all 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models (except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike) (chrome) Scalloped, for all 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models (except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike) (black/raw) Grooved, for all 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models (except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike) (chrome) Retro, for all 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models (except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike) (chrome) Smooth, for all 93-99 Evolution Big Twin models w/ CV carb, (chrome) Scalloped, for all 93-99 Evolution Big Twin models w/ CV carb, (chrome) Scalloped, for all 93-99 Evolution Big Twin models w/ CV carb, (black/raw) Grooved, for all 93-99 Evolution Big Twin models w/ CV carb, (chrome) Retro, for all 93-99 Evolution Big Twin models w/ CV carb, (chrome) Scalloped, for 99-01 Twin Cam FLT fuel-injected models (chrome) Scalloped, for 99-01 Twin Cam FLT fuel-injected models (black/raw) Retro, for 99-01 Twin Cam FLT fuel-injected models (chrome) Scalloped, for 91-13 XL models (chrome) Scalloped, for 91-13 XL models w/ CV carb or Delphi EFI (black/raw) Grooved, for 91-13 XL models (chrome) Retro, for 91-13 XL models w/ CV carb or Delphi EFI (chrome)

Will fit 88-90 models, breather system is not applicable for these model years.

All part numbers in BLUE are new for 2013.

$219.95 229.95 229.95 219.95 229.95 229.95 239.95 249.95 224.95 224.95 249.95 224.95 249.95 224.95 224.95 249.95 224.95 249.95 219.95 219.95 229.95 219.95 249.95 249.95 249.95 249.95 229.95 249.95 229.95 249.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

533


SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS DS-288881

EXHAUST DS-288880

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

534

DS-288882

BIG SUCKER™ PERFORMANCE AIR FILTER KITS

1010-0181 •Features a one-piece aluminum backing plate/carb support bracket •Eliminates the need for banjo fittings, hoses and filter •Breather passages exit at the mouth of the carburetor/throttle body, creating a virtually closed-loop system •Stage I kit includes a high-flow filter and accepts 93-12 oval or round OEM outer cover (unless noted) •Stage II kit includes a 20% larger high-flow filter and accepts an 8” round Ness or 8” round OEM outer cover •All necessary hardware and instructions are included with each kit PART # DESCRIPTION STAGE I KITS (ACCEPT OEM COVERS) 1010-0351 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models (natural) 1010-0353 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models (chrome) 1010-1013 For 08-13 FXD/FXDWG (natural) 1010-1012 For 08-13 FXD/FXDWG (chrome) 1010-1011 For 08-13 FXD/FXDWG (black) 1010-0179 For 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models (except 08-13 FXD/FXDWG, 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models) (natural) 1010-0181 For 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models (except 08-13 FXD/FXDWG, 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models) (chrome) DS-288880 For 93-99 Evolution Big Twin models w/ CV carb (natural) DS-288882 For 99-01 FLHTI/FLHRI (natural) 1010-10141 For 91-13 XL models (natural) 1 1010-0891 For 91-13 XL models (chrome) 1 1010-0892 For 91-13 XL models (black) STAGE I KITS (ACCEPT 8” ROUND AFTERMARKET COVERS ONLY) 1010-0179 For 08-13 FXD/FXDWG (natural) 1010-0181 For 08-13 FXD/FXDWG (chrome) 1010-00601 For 91-13 XL models (natural) STAGE II KITS (ACCEPT 8” ROUND AFTERMARKET OUTER COVERS) 1010-0352 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models (natural) 1010-0354 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models (chrome) 1010-0180 For 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models (except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models) (natural) 1010-0185 For 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models (except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models) (chrome) DS-288881 For 93-99 Evolution Big Twin models w/ CV carb (natural) DS-288883 For 99-01 FLHTI/FLHRI (natural) 1010-00611 For 91-13 XL models (natural) 1

Will fit 88-90 models also; breather system is not applicable for these model years.

All part numbers in BLUE are new for 2013.

SUG. RETAIL $129.95 149.95 139.95 159.95 159.95 129.95 149.95 129.95 129.95 139.95 159.95 159.95 129.95 149.95 129.95 139.95 159.95 139.95 159.95 139.95 139.95 139.95


SECTION 1010-0869

7

WINDSHIELDS & FAIRINGS

1010-0879

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

1010-0888

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING BIG SUCKER™ STAGE I AIR FILTER KIT WITH COVER

HANDLEBARS, CONTROLS & MIRRORS

•Features a one-piece aluminum backing plate/carb support bracket with patented hidden breather technology and radius air inlet •Eliminates the need for banjo fittings, hoses and filter •Breather passages exit at the mouth of the carburetor/throttle body, creating a virtually closed-loop system •Kit includes high-performance filter, backing plate and steel outer cover •Pre-oiled filters available in two styles: standard or stainless-steel jacketed •All necessary hardware and instructions are included with each kit PART # KITS WITH STANDARD FILTER 1010-0869 1010-0874 1010-0870

DESCRIPTION

SUG. RETAIL

For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models (chrome) For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models (black) For 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models (except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models) (chrome) 1010-0875 For 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models (except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models) (black) 1010-0871 For 93-99 Evolution Big Twin models w/ CV carb (chrome) 1010-0876 For 93-99 Evolution Big Twin models w/ CV carb (black) 1010-0872 For 99-01 FLHTI/FLHRI (chrome) 1010-0877 For 99-01 FLHTI/FLHRI (black) 1010-08731 For 91-13 XL models w/ CV carb or Delphi EFI (chrome) 1 1010-0878 For 91-13 XL models w/ CV carb or Delphi EFI (black) KITS WITH STAINLESS-STEEL JACKETED FILTER 1010-0879 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models (chrome) 1010-0884 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models (black) 1010-0889 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models w/ 58mm throttle bodies (chrome) 1010-0890 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models w/ 58mm throttle bodies (black) 1010-0880 For all 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models (except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models) (chrome) 1010-0885 For all 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models (except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models) (black) 1010-0881 For all 93-99 Evolution Big Twin models w/ CV carb (chrome) 1010-0886 For all 93-99 Evolution Big Twin models w/ CV carb (black) 1010-0882 For 99-01 Twin Cam FLT fuel-injected models (chrome) 1010-0887 For 99-01 Twin Cam FLT fuel-injected models (black) 1010-08831 For 91-13 XL models w/ CV carb or Delphi EFI (chrome) 1010-08881 For 91-13 XL models w/ CV carb or Delphi EFI (black) 1

CABLES

Will fit 88-90 models also, breather system is not applicable for these model years.

All part numbers in BLUE are new for 2013.

BRAKES

$159.95 159.95 159.95 159.95 159.95 159.95 159.95 159.95 159.95 159.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

179.95 179.95 179.95 179.95

FOOTRESTS & LICENSE PLATE FRAMES

179.95

WHEELS & AXLES

179.95 179.95 179.95 179.95 179.95 179.95 179.95

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

535


SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1010-0430

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

BIG SUCKER™ STAGE II AIR FILTER KITS WITH COVER •Features a one-piece aluminum backing plate/carb support bracket with patented hidden breather technology and radius air inlet •Eliminates the need for banjo fittings, hoses and filter •Breather passages exit at the mouth of the carburetor/throttle body, creating a virtually closed-loop system •Kit includes a 20% larger high-performance filter and steel outer cover •Pre-oiled filters available in two styles: standard or stainless-steel jacketed •All necessary hardware and instructions are included with each kit •Made in the U.S.A.

1010-0434

Stainless steel jacketed filter

PART # DESCRIPTION SUG. RETAIL KITS WITH STANDARD FILTER 1010-0432 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models (chrome) $169.95 1010-0434 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models (wrinkle black) 169.95 1010-0431 For 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models (except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models) (chrome) 169.95 1010-0433 For 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models (except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models) (wrinkle black) 189.95 1010-0430 For 93-99 Evolution Big Twin models w/ CV carb (chrome) 169.95 1010-0428 For 99-01 FLHTI/FLHRI (chrome) 169.95 1010-04291 For 91-13 XL models w/ CV carb or Delphi EFI (chrome) 169.95 KITS WITH STAINLESS-STEEL JACKETED FILTER 1010-0635 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models (chrome) 179.95 1010-0636 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models (black) 199.95 1010-0641 For all 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models (except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models) (chrome) 179.95 1010-0642 For all 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models (except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models) (black) 199.95 1010-0625 For all 93-99 Evolution Big Twin models w/ CV carb (chrome) 179.95 1010-0626 For all 93-99 Evolution Big Twin models w/ CV carb (black) 199.95 1010-0605 For 99-01 Twin Cam FLT fuel-injected models (chrome) 179.95 1010-0582 For 99-01 Twin Cam FLT fuel-injected models (black) 199.95 1010-05811 For 91-13 XL models w/ CV carb or Delphi EFI (chrome) 179.95 1010-05701 For 91-13 XL models w/ CV carb or Delphi EFI (black) 189.95 1

Will fit 88-90 models also, breather system is not applicable for these model years.

1010-0395

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

536

LITTLE SUCKER AIR FILTER KITS •Features a steel backing plate integrated into the filter •Steel backing plate includes urethane radius inlet •Utilizes factory breather hoses and hardware •Accepts factory outer air cleaner cover only 1010-0395 •Made in the U.S.A. PART # 1010-0395 1010-0396

DESCRIPTION For 99-06 Twin Cam w/ CV carb, 01-13 Twin Cam w/ Delphi EFI (except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models) For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models

SUG. RETAIL $99.95 99.95

All part numbers in BLUE are new for 2013.


SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE BIG SUCKER DERBY COVER AIR FILTER KITS •Unique air filter kits feature a 5-hole mounting system which allows Twin Cam derby covers (not included) to be bolted on as the outer cover •Pre-oiled filters available in two styles: standard or stainlesssteel jacketed •All kits include patented Ness hidden breather Big Sucker backing plates in either chrome or powder-coated black wrinkle finish

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS 1010-0633 Shown w/ Battistinis derby cover

PART # DESCRIPTION KITS W/ STANDARD PRE-OILED FILTER 1010-0631 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models (chrome) 1010-0633 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models (black) 1010-0639 For all 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models H-D FL Trike models) (chrome) 1010-0640 For all 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models H-D FL Trike models) (black) 1010-0632 For all 93-99 Evolution Big Twin models w/ CV carb (chrome) 1010-0634 For all 93-99 Evolution Big Twin models w/ CV carb (black) 1010-0575 For 99-01 Twin Cam FLT fuel-injected models (chrome) 1010-0577 For 99-01 Twin Cam FLT fuel-injected models (black) 1010-05761 For 91-13 XL models w/ CV carb or Delphi EFI (chrome) 1010-05781 For 91-13 XL models w/ CV carb or Delphi EFI (black) KITS W/ STAINLESS-STEEL JACKETED PRE-OILED FILTER 1010-0627 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models (chrome) 1010-0629 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models (black) 1010-0637 For all 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models H-D FL Trike models) (chrome) 1010-0638 For all 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models H-D FL Trike models) (black) 1010-0628 For all 93-99 Evolution Big Twin models w/ CV carb (chrome) 1010-0630 For all 93-99 Evolution Big Twin models w/ CV carb (black) 1010-0571 For 99-01 Twin Cam FLT fuel-injected models (chrome) 1010-0573 For 99-01 Twin Cam FLT fuel-injected models (black) 1010-05721 For 91-13 XL models w/ CV carb or Delphi EFI (chrome) 1010-05741 For 91-13 XL models w/ CV carb or Delphi EFI (black) 1

ENGINE

1010-0627 Shown w/ Ness Tech derby cover SUG. RETAIL $169.95 169.95

TRANSMISSION & DRIVELINE

(except 08-13 FLHT, FLHR, FLHX, FLTR and 169.95 (except 08-13 FLHT, FLHR, FLHX, FLTR and 169.95 169.95 169.95 169.95 169.95 169.95 169.95 189.95 189.95 (except 08-13 FLHT, FLHR, FLHX, FLTR and 189.95 (except 08-13 FLHT, FLHR, FLHX, FLTR and 189.95 189.95 189.95 189.95 189.95 189.95 189.95

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES

Will fit 88-90 models also, breather system is not applicable for these model years.

1010-1053

TANKS & OIL FILTERS

1010-1054

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS DERBY SUCKER AIR FILTERS FOR SCREAMIN’ EAGLE® BACKING PLATES

FOOTRESTS & LICENSE PLATE FRAMES

•Innovative filter upgrade for stock Screamin’ Eagle® air cleaner •Accepts any 5-hole Big Twin style derby cover (sold separately) •Comes with everything needed to mount to a round Screamin’ Eagle® backing plate •Available with either red filter or stainless steel filter PART # DESCRIPTION FOR 99-13 FXST/FLST, 02-07 FLHT, 97-07 FXD 1010-1055 Red 1010-1056 Stainless steel

WHEELS & AXLES

SUG. RETAIL $69.95 89.95

PART # DESCRIPTION FOR 08-13 FLHT, FLHR, FLHX, FLTR AND H-D FL TRIKE MODELS 1010-1053 Red 1010-1054 Stainless steel

All part numbers in BLUE are new for 2013.

SUG. RETAIL $69.95 89.95

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

537


SECTION

7

WINDSHIELDS & FAIRINGS

1010-0584

1010-0067

1010-0588

TOURING 1014-0092

1010-0591

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

538

BILLET SUCKER AND BIG SUCKER COMPONENTS •Replacement and optional components for all Ness Billet Sucker and Big Sucker air filter kits PART # DESCRIPTION SUG. RETAIL REPLACEMENT/OPTIONAL COMPONENTS 1010-0583 Stage I hardware kit for 99-06 Twin Cam CV carb and all 01-13 Twin Cam Delphi EFI models $34.95 1010-0584 Stage I hardware kit for 93-99 Evolution Big Twin models w/ CV carb 34.95 1010-0585 Stage I hardware kit for 99-01 Twin Cam FLT fuel-injected models 34.95 1010-0586 Stage I hardware kit for 91-13 XL models 34.95 1010-0591 Stage II hardware kit for 99-06 Twin Cam CV carb and all 01-13 Twin Cam Delphi EFI models 34.95 1010-0592 Stage II hardware kit for 93-99 Evolution Big Twin models w/ CV carb 34.95 1010-0593 Stage II hardware kit for 99-01 Twin Cam FLT fuel-injected models 34.95 1010-0594 Stage II hardware kit for 91-13 XL models 34.95 1010-0360 Stage I air filter for 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models 49.95 2110-9494 Stage I air filer for 99-10 FXST, 02-07 FLHT, 97-07 FXD/FXDWG 49.95 2110-9496 Stage I air filter for DS-288882 only 49.95 1011-2851 Stage I air filter for PART #s 1010-1014, 1010-0891 and 1010-08092 49.95 1010-0361 Stage II air filter for 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models 54.95 2110-9495 Stage II air filter element (except 08-13 FLHT/FLHR/FLHX/FLTR and H-D FL Trike models) 54.95 1011-1651 Stage I stainless-steel jacketed air filter for 99-10 FXST, 02-07 FLHT, 97-07 FXD/FXDWG 69.95 1011-1650 Stage I stainless-steel jacketed air filter for 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models 69.95 1011-1654 Stage I stainless-steel jacketed air filter for 99-01 Twin Cam FLT fuel-injected models 69.95 1011-1652 Stage II stainless-steel jacketed air filter for 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models 79.95 1011-1653 Stage II stainless-steel jacketed air filter for 99-06 Twin Cam CV carb, 01-13 Twin Cam Delphi EFI models (except 08-12 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models), 93-99 Evolution Big Twin models w/ CV carb, 99-01 Twin Cam FLT fuel-injected models, 91-12 XL models 79.95 1011-2769 Big Sucker Derby Cover standard air filter for 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models 64.95 1011-2768 Big Sucker Derby Cover stainless-steel jacketed air filter for 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models 84.95 1011-2771 Big Sucker Derby Cover standard air filter for all 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models ( except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models) 64.95 1011-2770 Big Sucker Derby Cover stainless-steel jacketed air filter for all 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models (except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models) 84.95 1011-2773 Big Sucker Derby Cover standard air filter for 99-01 Twin Cam FLT fuel-injected models 64.95 1011-2772 Big Sucker Derby Cover standard air filter for 99-01 Twin Cam FLT fuel-injected models 84.95 1011-2771 Big Sucker Derby Cover standard air filter for 91-13 XL models 64.95 1011-2770 Big Sucker Derby Cover stainless-steel jacketed air filter for 91-13 XL models 84.95 1010-0587 Gasket kit for 08-13 FLT and H-D FL Trike models 8.95 1010-0588 Gasket kit for 99-06 Twin Cam CV carb, 01-13 Twin Cam Delphi EFI (except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models), 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam Carb and Delphi EFI models 8.95 1010-0589 Gasket kit for 99-01 Twin Cam FLT fuel-injected models 8.95 1010-0590 Gasket kit for 91-13 XL models 8.95 1014-00301 Optional Stage I scalloped outer cover (chrome) 119.95 1 1014-0044 Optional Stage I scalloped outer cover (black/raw) 119.95 1014-00911 Optional Stage I smooth outer cover (chrome) 49.95 1014-00921 Optional Stage I smooth outer cover (black) 49.95 1010-0067 Optional Stage II scalloped outer cover (chrome) 119.95 1014-0045 Optional Stage II scalloped outer cover (black/raw) 119.95 1014-0043 Optional Stage II retro outer cover (chrome) 119.95 1

Not for PART #s 1010-0891, 1010-0892, 1010-1014, 1010-1011, 1010-1012 and 1010-1013.

1010-0607

DOUBLE BARREL AIR FILTER ASSEMBLIES •Leading-edge design changes the look and performance of your bike •Includes aluminum double barrel outer cover, aluminum radius inlet backing plate, pre-oiled hi-performance air filter and all necessary hardware •Filter is reusable and washable •Available in chrome or powder-coated black wrinkle finish PART # 1010-0606 1010-0607 1010-0608

1010-0606

DESCRIPTION For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models (chrome) For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models (black) For all 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models (except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models) (chrome)

SUG. RETAIL

PART # 1010-0609

$249.95 249.95

1010-0579 1010-0580

DESCRIPTION SUG. RETAIL For all 99-06 Twin Cam CV carb and 01-13 Twin Cam Delphi EFI models (except 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models) (black) $249.95 For 91-13 XL models w/ CV carb or Delphi EFI (chrome) 249.95 For 91-13 XL models w/ CV carb or Delphi EFI (black) 249.95

249.95

All part numbers in BLUE are new for 2013.


SECTION 1010-0325

1010-1146

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

1010-0419

LUGGAGE 1010-0235 1014-0133

SEATS & SISSY BARS EXHAUST

1010-0236

FUEL/AIR SYSTEMS 1014-0040

AIR CLEANERS •Original S&S chrome teardrop air cleaner assemblies •Include an S&S cover, backing plate and high-quality filter element and hardware kit •Increase horsepower with no other changes •Available for most OEM carburetors and S&S performance intake systems •Available in chrome and black •Made in the U.S.A.

ENGINE

1011-1721

TRANSMISSION & DRIVELINE

NOTE: Installation of an S&S air cleaner may require re-jetting or engine re-tuning. PART # DESCRIPTION AIR CLEANERS FOR S&S CARBURETORS DS-289137 For E & G series carbs on 99-06 Twin Cam models DS-289211 For E & G series carbs on 92-99 Evolution Big Twin models DS-289129 For E & G series carbs on 84-92 Big Twin and 86-90 XL models

SUG. RETAIL

AIR CLEANERS FOR STOCK H-D CARBURETORS/FUEL-INJECTION SYSTEMS PART # DESCRIPTION CHROME 1010-0419 For 08-13 FLHT, FLHR, FLHX, FLTR and 09-13 H-D FL Trike models 1010-0325 For CV carbs on 93-06 Big Twin, 01-13 Big Twin w/ Delphi EFI models (except 08-13 Touring/HD FL Trike models) 1010-0326 For EFI and CV carbs on 91-13 XL POWDER-COAT WRINKLE BLACK 1010-1146 For CV carbs on 93-06 Big Twin, 01-13 Big Twin w/ Delphi EFI models (except 08-13 Touring/HD FL Trike models) 1010-1147 For EFI and CV carbs on 91-13 XL

$239.95 239.95 239.95

ELECTRICAL

SUG. RETAIL

LIGHTING

$239.95 239.95 239.95 239.95 239.95

PART # DESCRIPTION AIR CLEANERS FOR SINGLE-BORE EFI MODELS 1010-0237 For stock H-D heads or S&S heads for stock or 4” bore, teardrop 1010-0236 For stock H-D heads or S&S heads for stock or 4” bore, Slasher 1010-0235 For S&S heads for 41/8” bore, Slasher

SUG. RETAIL

PART # DESCRIPTION REPLACEMENT COMPONENTS DS-289404 Repl. S&S air cleaner cover for E & G carb, chrome 1014-0133 Repl. S&S air cleaner cover for E & G carb, black DS-289403 Repl. S&S air cleaner cover for S&S CV air cleaner and Super B carbs, chrome 1014-0040 Repl. Slasher-style air cover; repl. for all E & G carbs, chrome DS-289405 Repl. air cleaner cover screws (10-pk.) 1011-0324 Repl. crankcase breather hose for 93-06 Big Twin, 91-06 XL and 94-02 Buells 1011-0325 Breather screw seals (silicone-coated steel washer), .520” i.d. (10-pk.) 1011-0326 Breather screw seals (silicone-coated steel washer), .380” i.d. (10-pk.) 1011-1721 Repl. filter element for DS-289137, DS-289211, DS-289128, DS-289129, DS-289130, 1010-0325, 1010-0326, 1010-0235, 1010-0236, 1010-0237, 1010-0419 DS-289409 Repl. filter element for DS-289070, DS-289400, DS-289401, DS-289402, DS-289410 and S&S Super B

SUG. RETAIL

$239.95 239.95 239.95

HIGH-FLOW AIR FILTER AND ADAPTER KIT

DESCRIPTION For S&S Super E and G carbs Repl. high-flow filter for S&S Super E and G carbs (also fits S&S air cleaners for stock carbs and EFI throttle bodies)

All part numbers in BLUE are new for 2013.

18.95 16.95

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

NOTE: Not for use with S&S Super B or Super D carburetors, or Super E and G Kits for Buells. PART # 1011-0323 1011-2286

$143.95 121.95 143.95 143.95 .95 (ea.) 6.95 1.25 1.25

1011-0323

•High-flow filter designed especially for Super E and G carburetors •Filter is 1” taller than standard filter and features a low-restriction, pre-oiled filter element •Allows for a 37% increase in airflow •Filter and adapters extend the teardrop housing out 1” for better exposure and a high-performance street racer look •Kit installs in minutes; no permanent modifications required •Made in the U.S.A.

GASKETS & SEALS

SUG. RETAIL $52.95 22.95

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

539


SECTION

7 1010-1076

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

SUPER STOCK™ STEALTH AIR CLEANER KITS •For stock and S&S fuel system applications •Kits include backing plate, filter and hardware •Built-in stinger cone in the filter directs air smoothly into the bore of the carburetor or EFI throttle body and reduces turbulence and increases flow •Optional high-flow (1” taller) filter also available •Made in the U.S.A.

1010-1077

NOTE: Kits do not come with covers. Must use with stock Twin Cam 88®, 96™, or 103™ air cleaner cover, or can be used with S&S Stealth air cleaner covers (sold separately) PART # 1010-1074 1010-1075 1010-1076

FUEL/AIR SYSTEMS

DESCRIPTION SUG. RETAIL For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models w/ stock EFI $129.95 For 93-99 Evo Big Twin w/ stock CV carb 129.95 For 99-06 Twin Cam Big Twin w/ stock CV carb and 01-13 Big Twin w/ Delphi EFI (except 08-13 Dresser/ H-D FL Trike) 129.95

PART # DESCRIPTION 1010-1077 For 93-99 Evo Big Twin w/ E/G series carb 1010-1078 For 99-06 Twin Cam Big Twin w/ E/G series carb 1010-1073 For 91-13 XL w/ stock CV carb & Delphi EFI REPLACEMENT/OPTIONAL COMPONENTS 1011-2765 Repl. Stealth filter 1011-2766 Opt. Stealth hi-flo filter kit (1” taller)

1014-0121

1014-0116

ENGINE

SUG. RETAIL $129.95 129.95 129.95 39.95 59.95

1014-0120

TRANSMISSION & DRIVELINE 1014-0119

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1014-0123

1014-0122

STEALTH AIR CLEANER COVERS •Fit the S&S Stealth air cleaner kits •Bob and Muscle style air cleaner covers are machined from billet aluminum and fit over the end of the air filter and leave the filter element exposed •Air Stream-style is die-cast and features screened vents for more air without sucking in rain/road hazards •Muscle-style features muscle car-style hood pins •Made in the U.S.A. PART # 1014-0116 1014-0117 1014-0118 1014-0119

DESCRIPTION Air Stream, chrome Air Stream, black wrinkle powder-coat Bob dish, chrome Bob dish, black wrinkle powder-coat

SUG. RETAIL $139.95 139.95 94.95 94.95

PART # 1014-0120 1014-0121 1014-0122 1014-0123

DESCRIPTION Bob dome, chrome Bob dome, black wrinkle powder-coat Muscle, chrome Muscle, black wrinkle powder-coat

SUG. RETAIL $94.95 94.95 119.95 129.95

CABLES 1010-1079

1011-0897

BRAKES

1011-0898

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

540

1010-0705

TUNED INDUCTION AIR CLEANERS •Swept forward, 2-into-1 design rams additional air into the cylinder •Natural supercharging effect increases mid-range torque •Nearly twice the filter area of a teardrop air cleaner •Feature chrome runner and bracket (except where noted), backing plate, filters and hardware •Made in the U.S.A.

1011-1336

PART # DESCRIPTION 1010-1079 For 84-06 Big Twin models w/ stock CV carb and 01-13 Big Twin models w/ Delphi EFI (except 08-13 Touring) 1010-1083 For 84-13 Big Twin models w/ S&S single-bore fuel-injection (except 08-13 Touring) 1010-1084 For 84-06 Big Twin models w/ S&S E/G series carb 1010-1082 For S&S 124”, 117”, 111” motors w/ S&S 41/8” E/G series carb 1010-1081 For S&S 124”, 117”, 111” motors w/ S&S 41/8” single-bore fuel-injection 1010-1080 For 91-13 XL w/ stock CV carb and Delphi EFI 1010-07051 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL trike models 2 1010-0706 For 08-13 FLHT, FLHR, FLHX, FLTR and H-D FL trike models REPLACEMENT COMPONENTS 1011-0897 Repl. red filter w/ clamp (ea.) 1011-0898 Opt. blue filter w/ clamp (ea.) 1011-1336 Moisture repellent rain cover for S&S tuned induction filters (pr.) 1

Black wrinkle powder-coat runner and bracket.

2

Chrome runner w/ black wrinkle powder-coat bracket.

All part numbers in BLUE are new for 2013.

SUG. RETAIL $539.95 539.95 539.95 539.95 539.95 539.95 449.95 459.95 52.95 52.95 44.95


SECTION Plain

7

WINDSHIELDS & FAIRINGS

Swept Cross

TOURING AUDIO & COMMUNICATION

Spoke Cross

LUGGAGE AIR CLEANER KITS •Flows better than stock or competing units, in large part because of its unique internal venturi design of the inner filter •Optimizes overall performance •High-flow K&N® Air Filter element ensures the maximum air intake and protection •Four styles available in black or chrome finishes •Slim profile keeps the unit away from the rider’s leg •The Cobra system consists of a laser-cut, formed steel cover, separate mounting ring, and all the fasteners, seals, backing plate and mounting hardware for easy installation •Formed stainless steel mesh insert •Made in the U.S.A. CHROME PART # DESCRIPTION SUG. RETAIL FOR 08-13 DRESSER 1010-1224 Swept $199.95 1010-1226 Cross 199.95 1010-1228 Plain 199.95 1010-1230 Spoke 199.95 FOR 00-13 SOFTAIL/DYNA 1010-1232 Swept 199.95 1010-1234 Cross 199.95

PART # DESCRIPTION SUG. RETAIL FOR 00-13 SOFTAIL/DYNA (CONT) 1010-1236 Plain $199.95 1010-1238 Spoke 199.95 FOR 04-13 XL 1010-1240 Swept 199.95 1010-1242 Cross 199.95 1010-1244 Plain 199.95 1010-1246 Spoke 199.95

BLACK PART # DESCRIPTION SUG. RETAIL FOR 08-13 DRESSER 1010-1225 Swept $199.95 1010-1227 Cross 199.95 1010-1229 Plain 199.95 1010-1231 Spoke 199.95 FOR 00-13 SOFTAIL/DYNA 1010-1233 Swept 199.95 1010-1235 Cross 199.95

Black

Chrome

PART # DESCRIPTION SUG. RETAIL FOR 00-13 SOFTAIL/DYNA (CONT) 1010-1237 Plain $199.95 1010-1239 Spoke 199.95 FOR 04-13 XL 1010-1241 Swept 199.95 1010-1243 Cross 199.95 1010-1245 Plain 199.95 1010-1247 Spoke 199.95

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

Internal Venturi

ELECTRICAL 1010-0814

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

POWRFLO AIR INTAKE

CABLES

•Unique internal venturi design promotes maximum airflow •High-flow K&N® air filter element ensures the best air intake and maximum protection for your engine •The PowrFlo Intake system consists of an aluminum cover and all the fasteners, seals, backing plate and mounting hardware to make for an easy installation •Formed stainless steel mesh insert in the dual entry ports keeps out bugs and debris •Available in black or chrome finish PART # DESCRIPTION FOR 99-13 TWIN CAM (EXCEPT 08-13 DRESSER/H-D FL TRIKE) W/ CV CARB/DELPHI EFI 1010-0816 Chrome 1010-0817 Black FOR 08-13 FLHT, FLHR, FLTR, FLHX AND H-D FL TRIKE 1010-0814 Chrome

SUG. RETAIL

$269.95 269.95

BRAKES

PART # DESCRIPTION FOR 08-13 FLHT, FLHR, FLTR, FLHX AND H-D FL TRIKE (CONT) 1010-0815 Black FOR 04-13 XL W/ CV CARB/DELPHI EFI 1010-0894 Chrome 1010-0895 Black

SUG. RETAIL $269.95 269.95 269.95

269.95

FOOTRESTS & LICENSE PLATE FRAMES

•Easy-to-install filter upgrade for Screamin’ Eagle air cleaners •PART #1011-1411 includes a 3” deep washable reusable filter element with 60% more surface area than the Screamin’ Eagle kit filter •PART #1011-0782 includes a specially designed, washable pleated fabric filter that is 5/8” deeper than the factory performance filter it is designed to replace – more surface area provides (9+%) more airflow and more power is the result •Required mounting hardware supplied with both kits •Made in the U.S.A.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS

NOTE: Legal in California only for racing vehicles which may never be used on a highway. PART # 1011-1411 1011-0782

DESCRIPTION For 08-13 FLHT, FLHR, FLHX, FLTR models and H-D FL Trikes w/ Screamin’ Eagle air cleaner kit OEM #29260-08 For 99-13 Twin Cam w/ Screamin’ Eagle air cleaner kit OEM #29440-99C (except 08-13 FLHT, FLHR, FLHX, FLTR, H-D FL Trike)

All part numbers in BLUE are new for 2013.

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

1011-1411

FILTER UPGRADE KITS

TANKS & OIL FILTERS

SUG. RETAIL $69.95 69.95

COVERS, SECURITY & GENERAL

541


SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

DRAG SPECIALTIES DESIGN AIR CLEANERS •Chrome air cleaner kit with spear- or twister-style cone designed exclusively for Drag Specialties •Increases airflow approximately 10% more than an OEM air cleaner •Includes filter cone with 360° slots, K&N air filter, 90° chrome elbow and installation hardware •Will accept D&M Bullet replacement cones •Requires the use of a carb support bracket and breather kit (sold separately) •Optional adapters allow mounting on various carbs (sold separately) •Made in the U.S.A.

1015-0104

1015-0086

FOR 90-06 BIG TWIN AND 88-06 XL W/ 40MM CARB, 01-13 BIG TWIN OR XL W/ DELPHI EFI PART # 1015-0086 1015-0104

DESCRIPTION Drag Specialties Spear air cleaner Drag Specialties Twister air cleaner

SUG. RETAIL $489.95 538.95

PART # 7807-0018 1011-1778

DESCRIPTION Repl. air filter Rain sock

SUG. RETAIL $70.95 26.95

THE BULLET AIR CLEANERS •Chrome air cleaner with a bulletshaped cone with 360° slots •Increases airflow approximately 10% more than an OEM air cleaner •Includes bullet-shaped filter cone, K&N air filter, 90° elbow and installation hardware •Available with black or chrome elbow •Diamond-cut cones also available; scalloped design •Requires the use of a carb-support bracket and breather kit (sold separately) •Made in the U.S.A.

1015-0066 1015-0071

1015-0073

7807-0017

FOR 90-06 BIG TWIN, 88-06 XL W/ 40MM CARB OR 01-13 BIG TWIN AND XL W/ DELPHI EFI PART # DESCRIPTION WITH CHROME ELBOW 7807-0017 Chrome cone 1015-0071 Black diamond-cut cone WITH BLACK ELBOW 1015-0065 Wrinkle black cone 1015-0066 Black cone

LIGHTING

SUG. RETAIL $489.95 594.95 489.95 489.95

PART # DESCRIPTION WITH BLACK ELBOW (CONT) 1015-0073 Black diamond-cut cone RAIN SOCK AND REPLACEMENT AIR FILTER 1011-1780 Rain sock 7807-0018 Repl. air filter

SUG. RETAIL $594.95 26.95 70.95

DS-289544 DS-289544 1015-0107

HANDLEBARS, CONTROLS & MIRRORS DS-289543

CABLES 1010-1118

BRAKES

1015-0036

1015-0014

TANKS & OIL FILTERS

DS-289546 1015-0021

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

542

POWER FLOW AIR CLEANERS •Provides the latest look and performance of forward-style intake systems •Increases airflow approximately 20% more than an OEM air cleaner •Can be installed horizontally or vertically when using a 3.5-gallon Fat Bob or smaller fuel tank; vertical adapter sold separately 1010-1119 •Requires carburetor support bracket and breather kit; sold separately •Includes a CNC-machined billet filter cone with tapered, straight or Superslot slots, a 90° elbow, K&N air filter, gasket, hardware and wrench •Diamond-cut cones also available; feature unique diamond-cut design on the edges of the slot openings •Optional adapters allow mounting on various carbs (sold separately) •Made in the U.S.A. FOR 90-06 BIG TWIN, 88-06 XL W/ 40MM CV CARBURETOR AND 01-13 BIG TWIN AND XL W/ DELPHI EFI PART # DESCRIPTION WITH CHROME ELBOW 1015-0107 Chrome cone, Superslot DS-289544 Chrome cone, straight slots DS-289543 Chrome cone, tapered slots 1010-1118 Chrome Machine Gun WITH BLACK ELBOW DS-289546 Chrome cone, straight slots 1015-0014 Wrinkle black cone, straight slots

SUG. RETAIL $489.95 489.95 489.95 514.95 489.95 489.95

PART # DESCRIPTION WITH BLACK ELBOW (CONT) 1015-0015 Black cone, straight slots 1015-0021 Wrinkle black cone, tapered slots 1015-0036 Black diamond-cut cone, tapered slots 1010-1119 Black Machine Gun RAIN SOCK AND REPLACEMENT FILTER 1011-1779 Rain sock DS-289549 Repl. air filter

All part numbers in BLUE are new for 2013.

SUG. RETAIL $489.95 489.95 594.95 514.95 29.95 70.95


SECTION 1010-0707

1010-1121

1010-1120

WINDSHIELDS & FAIRINGS TOURING

BOSS DUAL AIR CLEANER KITS •Delivers an aggressive, sinister style with maximum airflow •Fits with 5-gallon fuel tanks •Made in the U.S.A.

AUDIO & COMMUNICATION

FOR 93-06 BIG TWIN WITH 40MM CV CARB OR 01-13 DELPHI EFI (EXCEPT 08-13 DRESSERS/H-D FL TRIKES) PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION SUG. RETAIL 1010-0707 Evil Twin, chrome $1,393.95 1010-1120 Machine Gun, chrome $1,393.95

PART # 1010-1121

DESCRIPTION Machine Gun, black

SUG. RETAIL $1,393.95

HEAVY HITTER AIR CLEANERS •Powerhouse air cleaners flow 540 cubic feet per minute to feed big inch motors •Designed to fit touring models with lowers •Features a built-in velocity stack and D&M’s High Flow air filter •Available with chrome, gloss black or wrinkle black finish on elbow and end cap; filter is available in standard black or with stainless steel wire •Made in the U.S.A.

1010-1026

SEATS & SISSY BARS EXHAUST

1010-1028

FUEL/AIR SYSTEMS

XL W/ 40MM CARB, 01-13 BIG TWIN OR XL W/ DELPHI EFI DESCRIPTION SUG. RETAIL PART # DESCRIPTION WITH GLOSS BLACK ELBOW (CONT) Stainless steel filter $427.95 1010-1026 Black filter Black filter 427.95 WITH WRINKLE BLACK ELBOW 1010-1027 Stainless steel filter Stainless steel filter 427.95 1010-1028 Black filter

SUG. RETAIL

ENGINE $427.95 427.95 427.95

ULTIMATE FLOW AIR CLEANER KITS

TRANSMISSION & DRIVELINE GASKETS & SEALS

•Deliver massive airflow 1010-0992 for peak performance at an economical price •Lifetime filter is produced using the latest materials for maximum filtration and powerful airflow •Filter is black media with a stainless steel end cap; also available with stainless steel wire •Elbow is available with chrome, gloss black or wrinkle black finish •Kits include elbow, filter, clamp, pre-filter and mounting hardware •Made in the U.S.A.

ELECTRICAL 1010-0993

1010-0994

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

Note: Requires use of support bracket/breather kit (sold separately). FOR 90-06 BIG TWIN, 88-06 XL W/ 40MM CV CARB, 01-13 BIG TWIN OR XL W/ DEPHI EFI PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION WITH CHROME ELBOW WITH WRINKLE BLACK ELBOW 1010-0992 Black filter $262.95 1010-0994 Black filter 1010-0995 Black filter with stainless steel wire 267.95 1010-0997 Black filter with stainless steel wire WITH GLOSS BLACK ELBOW REPLACEMENT COMPONENTS 1010-0993 Black filter 262.95 1011-2779 Black filter element 1010-0996 Black filter with stainless steel wire 267.95 1011-2780 Stainless steel filter element

SUG. RETAIL $262.95 267.95 59.95 65.95

AIR CLEANER ADAPTERS

CABLES

BRAKES TANKS & OIL FILTERS

•For D&M Power Flow, Bullet, Hustler and Drag Specialties air cleaners •Made in the U.S.A. PART # 1012-0011 7807-0118

LUGGAGE

1010-1023

NOTE: Requires use of support bracket/breather kit (sold separately). FOR 90-06 BIG TWIN, 88-06 PART # WITH CHROME ELBOW 1010-1023 1010-1024 WITH GLOSS BLACK ELBOW 1010-1025

7

1012-0011

DESCRIPTION S&S Super D carburetor (vertical or horizontal) S&S E and G carburetor (vertical or horizontal)

SUG. RETAIL $100.95 41.95

HS42/001-K PART # HS42/001-K DS-289547

DESCRIPTION Mikuni carburetor (horizontal) 40mm CV carburetor (vertical)

DS-289547 SUG. RETAIL $21.95 39.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

NESS-TECH® 90° AIR FILTERS •Carved from billet aluminum and then beautifully chrome-plated •Feature patented “Big Sucker” breather technology •Made in the U.S.A. PART # 1010-0120 1010-0121 1010-0122

WHEELS & AXLES 1010-0120

DESCRIPTION For Evolution and Twin Cam motors w/ CV carb or 01-05 Delphi EFI For 107” and under S&S motors w/ S&S carb For 111”-124” S&S motors w/ S&S carb (except 113”)

All part numbers in BLUE are new for 2013.

1010-0122 SUG. RETAIL $299.95 299.95 299.95

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

543


SECTION

7

WINDSHIELDS & FAIRINGS RK3901

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

RK SERIES BILLET AIR CLEANER ASSEMBLIES •Chrome-plated polished billet aluminum cover •Round or Teardrop, Flame, Grooved RK3911 or Smooth mirror finish •Includes K&N Original High-Flow Air Filter •Provides a substantial increase in horsepower •Pleated design provides high airflow •Powder-coated billet aluminum RK3912 backing plate •Spacers and hardware included •Specially designed drycharger extends service intervals and is pre-treated to repel water; sold separately •Made in the U.S.A. PART # DESCRIPTION FOR 92-99 80” BIG TWIN WITH OEM CARB RK3901 Smooth round filter assembly RK3911 Grooved round filter assembly RK3902 Smooth teardrop filter assembly RK3912 Grooved teardrop filter assembly RK-3922 Flame teardrop filter assembly FOR 91-97 XL 1200 WITH OEM CARB RK3903 Smooth round filter assembly RK3904 Smooth teardrop filter assembly

SUG. RETAIL $359.95 342.95 269.95 359.95 269.95 269.95 225.95

RK3902

RK-3922

PART # DESCRIPTION FOR 91-97 XL 1200 WITH OEM CARB (CONT) RK3914 Grooved teardrop filter assembly RK3924 Flame teardrop filter assembly REPLACEMENT FILTERS/DRYCHARGERS E-3333 Teardrop-style filter E-3336 Round-style filter RK-3901PK Drycharger for round filter assembly RK-3902PK Drycharger for teardrop filter assembly

SUG. RETAIL $269.95 359.95 66.95 64.95 25.95 25.95

1010-0671

1010-1107

LIGHTING

1011-2882

HANDLEBARS, CONTROLS & MIRRORS CABLES 1010-0322

1010-0417

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

RK-SERIES AIR INTAKE ASSEMBLIES •Complete intake assembly fits neatly behind the stock air cleaner cover •Provide a significant increase in airflow, smoother delivery to engine, while boosting performance and filtration •Feature a K&N High-Flow air filter, pleated design for high airflow, specially designed lip seal for perfect seal, powder-coated aluminum backplate that eliminates external breathers and a built-in, dyno-tuned velocity stack •Maintain factory appearance, utilizes the stock air cleaner outer cover •Made in the U.S.A. NOTE: C.A.R.B. approved for 99-06 models.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

544

PART # DESCRIPTION SUG. RETAIL FOR 99-06 TWIN CAM W/CV CARB, 01-13 TWIN CAM W/ DELPHI EFI (EXCEPT 08-13 FLSTSB, DYNA AND DRESSER) 1010-1107 Large capacity filter assembly; 21/4” tall $199.95 1011-2868 Stock capacity filter assembly; 15/8” tall 249.95 1011-2882 Repl. air filter for large capacity filter assembly for 1 PART #1010-1107; 2 /4” tall 78.95 FOR 08, 10-13 FXDWG, 08-13 FXD/FXDB/FXDC/FXDF/FXDL (EXCEPT 13 FXDB) 1010-0671 Large capacity filter assembly; 21/8” tall 241.95 1011-1736 Repl. filter for PART #1010-0671; 21/4” tall 76.95

PART # DESCRIPTION FOR 08-13 FLHT/FLHR/FLHX/FLTR 1010-0417 Large capacity filter assembly; 15/8” tall 1011-1509 Repl. air filter for large capacity filter assembly PART #1010-0417; 15/8” tall FOR 04-13 XL 883/1200 (EXCEPT 13 1200V) 1010-03221 Large capacity filter assembly; 21/4” tall 1011-1451 Repl. air filter for large capacity filter assembly for PART #1010-0322; 23/8” tall 1

Does not include cover.

All part numbers in BLUE are new for 2013.

SUG. RETAIL $266.95 90.95 439.95 82.95


SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

RK SERIES TEARDROP/ROUND CUSTOM AIR INTAKE ASSEMBLIES •Developed around an over-sized K&N high-flow air filter that is designed to boost performance, filtration and service intervals •Aluminum backing plate with an integrated breather system and velocity stack provides a solid mounting surface •High quality mirror finish aluminum cover

LUGGAGE

1010-1106

SEATS & SISSY BARS

1010-1105

PART # DESCRIPTION FOR 99-06 TWIN CAM W/ CV CARB, 01-13 TWIN CAM W/ DELPHI EFI (EXCEPT 08-13 DRESSERS) 1010-1105 Tear drop (Flare)

SUG. RETAIL

$249.95

PART # DESCRIPTION FOR 99-06 TWIN CAM W/ CV CARB, 01-13 TWIN CAM W/ DELPHI EFI (EXCEPT 08-13 DRESSERS) (CONT) 1010-1106 Round (Hammer)

SUG. RETAIL

$249.95

EXHAUST FUEL/AIR SYSTEMS

1010-0819

ENGINE TRANSMISSION & DRIVELINE

1010-1109

GASKETS & SEALS 1010-1110

ELECTRICAL

AIRCHARGER PERFORMANCE INTAKE KITS •K&N High-Flow air filter greatly increases performance and horsepower •Mandrel bent aluminum intake tube available in two finishes: polished bright mirror or textured black •Kit includes breather assembly and all necessary mounting hardware •Optional Drycharger™ for increased protection from the elements is available separately •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 01-13 TWIN CAM W/ DELPHI EFI (EXCEPT 08-13 FLHR, FLHT, FLHX, FLTR AND H-D FL TRIKE) 1010-1108 Textured black $442.95 1010-0819 Polished 456.95 FOR 08-13 FLHR, FLHT, FLHX, FLTR AND H-D FL TRIKE 1010-1109 Textured black 414.95 1010-0556 Polished 464.95 FOR 07-13 XL 883/1200 1010-1110 Textured black 487.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1011-1520

PART # DESCRIPTION FOR 07-13 XL 883/1200 (CONT) 1010-1038 Polished REPL. AIR FILTERS 1011-2620 For PART #s 1010-0811, 1010-0818 or 1010-0555; textured black 1011-2289 For PART #s 1010-0819 or 1010-0556; polished OPTIONAL DRYCHARGER 1011-1520 Drycharger

SUG. RETAIL

CABLES

$398.95

BRAKES 97.95 60.95 30.95

TANKS & OIL FILTERS DASHES & GAUGES

1010-0314

FRAMES, SUSPENSION & FENDERS 1011-1059 1011-1058

WHEELS & AXLES

CUSTOM AIR CLEANER ASSEMBLIES •Designed to fit Harley-Davidson motorcycles equipped with various carburetors •Increase horsepower with proper carburetor calibration •These air cleaners mount directly to the carburetor flange •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1010-0314 S&S carbs and 84-89 Keihin butterfly carbs; 5” dia. and polished outer cover (excluding all S&S E & G carbs) $92.95 1011-1058 36-38mm Mikuni air filter; 5” dia. open round style 70.95 1011-1059 36-38mm Mikuni air filter; 6” dia. chrome bonnet style 90.95

PART # RC-0920 1011-1060 1011-2661 1011-2662

FOOTRESTS & LICENSE PLATE FRAMES

1011-1060 DESCRIPTION SUG. RETAIL 40-45mm Mikuni air filter; 5” dia. open round style $74.95 40-45mm Mikuni air filter; 6” dia. chrome bonnet style 90.95 Repl. filter for 1011-1059 65.95 Repl. filter for 1011-1060 65.95

All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

545


SECTION

7 1010-0192

DS-288999

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

“BOB” RETRO-STYLE AIR CLEANER

STAMPED STEEL DRAGTRON™-STYLE AIR CLEANER

•Retro-style chrome-plated air cleaner measures 51/2” in diameter •Has a re-useable foam filter element •All necessary mounting hardware included •Replacement filter element available separately

•Stamped steel version of our popular die-cast Dragtron air cleaner •Fits Bendix, Keihin (not CV) and Tillotson carburetors PART # DS-288999 DS-289043

DESCRIPTION Air cleaner Repl. foam element

SUG. RETAIL $32.95 4.95

EXHAUST FUEL/AIR SYSTEMS

NOTE: Requires appropriate carb support bracket. PART # DESCRIPTION SUG. 1010-0191 For CV and Delphi fuel-injected applications (except 08-13 FLHT/FLHR/FLTR/FLHX and H-D FL Trikes) 1010-0192 For S&S E and G series carburetors 1011-0881 Repl. air filter element

RETAIL $64.95 64.95 14.95

DS-288903

ENGINE 1010-0708

TRANSMISSION & DRIVELINE DS-288903

GASKETS & SEALS ELECTRICAL 1010-0710

7” ROUND AIR CLEANERS LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

•Chrome air cleaners fit Harley models equipped with Bendix, Keihin carburetors or Delphi EFI •PART #DS-288903 will require a support brace or a brace/breather kit for models listed (sold separately) •Air filter included

TEARDROP AIR CLEANER ASSEMBLIES

PART # DESCRIPTION DS-288903 For 90-06 Big Twin and 88-06 XL models w/ OEM CV carb, 01-13 Twin Cam w/ Delphi EFI (except 08-13 FLHT/FLHR/FLTR/FLHX and H-D FL Trike) DS-288998 For Bendix and Keihin (not CV) carbs

NOTE: PART #s 1010-0708 and 0708-0710 require the use of a support bracket and breather kit (as needed).

SUG. RETAIL

$49.95 39.95

BRAKES TANKS & OIL FILTERS

•Chrome-plated cast aluminum construction •Measures 8” L x 41/2” H x 2” D •Include mini air filter and all necessary fittings and hardware •Made in the U.S.A.

PART # DESCRIPTION FOR S&S SUPER E & SUPER G CARBS 1010-0708 Slotted 1010-0710 Ribbed FOR KEIHIN CV CARBS AND 01-13 DELPHI FUEL-INJECTION (EXCEPT 08-13 DRESSER AND H-D FL TRIKE) 1010-0709 Slotted 1010-0711 Ribbed

SUG. RETAIL $268.95 166.95

268.95 166.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

1010-0552 1013-0060 1013-0059

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

546

1010-0553

AIR CLEANER ADAPTERS •Allows installation of a Dragtron II air cleaner (DS-289044) to models listed •Plain machined finish PART # 1010-0552 1010-0553

SUG. DESCRIPTION RETAIL For 08-13 FLHT, FLHX, FLHR, FLTR and H-D FL Trike models $26.95 For 01-13 models w/ Delphi EFI (except 08-13 Dressers and H-D FL Trike) 21.95

AIR CLEANER ADAPTERS •Allows installation of an L.A. Choppers xXx air cleaner or Baron Big Air Kit to a Mikuni or S&S carburetor •Will also work for mounting other air cleaner kits designed to mount stock CV carburetors •Constructed from T-6061 billet aluminum •Made in the U.S.A. PART # 1013-0059 1013-0060

DESCRIPTION For Mikuni HSR42/45 carburetors For S&S carburetors

All part numbers in BLUE are new for 2013.

SUG. RETAIL $39.95 39.95


SECTION 1014-0134

1014-0128

1014-0135

7

WINDSHIELDS & FAIRINGS TOURING

1014-0126

1014-0136

1014-0137

1014-0138

AUDIO & COMMUNICATION LUGGAGE

1014-0129

1014-0127

SEATS & SISSY BARS

WIRE FRAME AIR FILTER COVERS •Machined from 6061 T-6 aluminum •Fit any Arlen Ness Big Sucker or Screamin’ Eagle Stage I air filter kit •Simple bolt-on installation •Made in the U.S.A. PART # DESCRIPTION FOR STAGE 1 AIR FILTERS 1014-0126 Chrome 1014-0127 Black anodized 1014-0128 Chrome/black anodized 1014-0129 Black anodized/chrome

1014-0140

1014-0139

1014-0141

EXHAUST

SUG. RETAIL

FUEL/AIR SYSTEMS

$379.95 379.95 379.95 379.95

ENGINE 1014-0143

1014-0142

1014-0144

TRANSMISSION & DRIVELINE 1010-0164

GASKETS & SEALS

1010-0165

ELECTRICAL

SKULL AIR CLEANER COVER

AIR CLEANER COVERS

•Replacement cover for the standard teardrop cover on S&S E or G series air cleaners 1014-0132 •Skull motif flows cleanly down the side of the cover for a unique look •High-strength composite material construction with a chrome-plated finish •Installs quickly and easily with supplied hardware PART # 1010-0164 1010-0165 1014-0132

DESCRIPTION Hot Rod black Chrome Black chrome

1010-0716

•Fit S&S Stealth Air Cleaner •Come with center mounting bolt •Billet aluminum with Stainless Mesh Cover •Triple chrome plated or Gloss Black with contrast cut •Complement Mini Beast Xr series and PPi Derby covers and Points covers

SUG. RETAIL $99.95 99.95 99.95

1010-0716

PART # 1014-0134 1014-0135 1014-0136 1014-0137 1014-0138 1014-0139 1014-0140 1014-0141 1014-0142 1014-0143 1014-0144 1014-0145

DESCRIPTION 7 Spoke design-black 7 Spoke design-chrome Off 7 design-black Off 7 design-chrome Racer 5 design-black Racer 5 design-chrome Avenger design-black Avenger design-chrome 8 Blade design-black 8 Blade design-chrome Mesh Ring design-chrome Mesh Ring design-black

LIGHTING

SUG. RETAIL $109.95 109.95 109.95 109.95 109.95 109.95 109.95 109.95 109.95 109.95 109.95 109.95

ALLEY CAT AIR CLEANER COVER SCARAB AIR CLEANER COVER •Stylish upgrade for the OEM air cleaner assembly •Contoured design adds a racy touch •Chrome grille openings allow additional airflow

1010-0717

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1010-0717

PART # 1010-0716

HANDLEBARS, CONTROLS & MIRRORS

SUG. RETAIL

DESCRIPTION For 02-13 FLHT, FLHR, FLTR, FLHX and H-D FL Trike (except CA models w/ carburetor), 01-13 FXST/FLST (except 08-11 FLSTSB and CA models w/ carburetor), 04-07 FXD/FXDWG $69.95 For 99-03 FXD/FXDWG, 04-05 FXD/FXDWG, FXDX (CA model only), 99-06 FLHT, FLHR, FLTR, FLHX (CA models only), 02-05 FLHTI (CA model), 00-06 FXST/FLST (CA models w/ carburetor) 69.95

•Designed to fit Küryakyn Street Sleeper II high-flow air cleaner •Features a unique chrome insert and “knock-off” style end cap for a retro look •Cover only, not a complete air filter assembly •Sold each PART # 1014-0131

DESCRIPTION SUG. RETAIL For 99-13 FLHT/FLHR/FLTR/FLHX w/ Screamin’ Eagle Stage I air cleaner kit, 00-13 FLST/FXST and 99-07 Dyna w/ Küryakyn Street Sleeper II air cleaner or Arlen Ness Stage I Big Sucker air cleaner (will not work w/ Arlen Ness Stage II Big Sucker air cleaner or original Küryakyn Street Sleeper) $109.95

All part numbers in BLUE are new for 2013.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

547


SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION 1014‑0115

1014‑0114

STRAIGHT‑CUT AIR CLEANER INSERTS

LUGGAGE

•Billet aluminum with machined highlights •Available in chrome or gloss black powdercoat •Include mounting hardware •Design matches other Drag Specialties/Carl Brouhard Designs products

SEATS & SISSY BARS FIVE‑BOLT DOMED AIR CLEANER INSERT EXHAUST FUEL/AIR SYSTEMS

•Die‑cast insert with a chrome finish •Matches the five‑bolt style of OEM derby cover PART # DESCRIPTION DS‑288929 For 99‑13 OEM Twin Cam air cleaners (except 08‑13 Dyna)

1014‑0046

SUG. RETAIL $37.95

1014‑0047

PART # DESCRIPTION SUG. RETAIL FOR 99‑13 TWIN CAM W/ STOCK AIR CLEANER COVER (EXCEPT 08‑13 DYNA) 1014‑0114 Chrome $76.95 1014‑0115 Gloss black/re‑machined 76.95

1014‑0075

ENGINE AIR CLEANER INSERTS

TRANSMISSION & DRIVELINE GASKETS & SEALS

1014‑0049

•High‑quality inserts for a sleek, custom look •Constructed of 6061 T‑6 aluminum •Available in three distinct styles with a choice of finish: chrome or black anodized with re‑machined accents •Easy installation •Made in the U.S.A.

1014‑0112

PART # DESCRIPTION SUG. RETAIL FOR 99‑13 TWIN CAM W/ STOCK AIR CLEANER COVER (EXCEPT 08‑13 DYNA) 1014‑0046 Lefty series, black $94.95 1014‑0047 Lefty series, chrome 94.95 1014‑0075 Waterfall series, black 105.95 1014‑0049 Waterfall series, chrome 105.95 1014‑0112 Cross series, black 94.95 1014‑0113 Cross series, chrome 94.95

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1014‑0113

1010‑1051

1010‑0867

1010‑1052

CABLES 1010‑0868

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

548

AIR CLEANER INSERTS •Fit VO2 Naked air intake, Screamin’ Eagle and other aftermarket air cleaners with a round filter element and center‑bolt mount •51/2” stamped steel covers feature subtle creasing reminiscent of old‑school mag wheels •Brilliant chrome or black ceramic finish PART # SKULLCAP 1010‑0868 1010‑0867

DESCRIPTION Chrome Black

DS‑288819

SUG. RETAIL $49.95 59.95

PART # SKULLCAP CROWN 1010‑1051 1010‑1052

DESCRIPTION

SUG. RETAIL

Chrome Black

$49.95 59.95

DS‑288820

AIR CLEANER INSERTS •Bolt‑on inserts give a customized look to aftermarket or OEM air cleaner •Constructed of billet aluminum and available in a chrome finish PART # DESCRIPTION FOR 99‑13 TWIN CAM WITH OEM AIR CLEANER (EXCEPT 08‑13 DYNA) DS‑288819 Millennium smooth DS‑288820 Millennium ball‑milled

All part numbers in BLUE are new for 2013.

SUG. RETAIL $79.95 79.95


SECTION

7

WINDSHIELDS & FAIRINGS TOURING 1010‑0534

1010‑1035

1010‑1036

AIR CLEANER INSERTS

1014‑0158

1010‑1037

AUDIO & COMMUNICATION

•CNC‑machined billet aluminum construction •Finned style •Made in the U.S.A.

LUGGAGE

FOR 99‑13 OEM TWIN CAM AIR CLEANER (EXCEPT 08‑13 DYNA) PART # FINNED 1010‑0415 1010‑0534

DESCRIPTION Gloss black powdercoat Black diamond edge

SUG. RETAIL $129.95 179.95

PART # DESCRIPTION MACHINE HEAD 1010‑1035 Gloss black powdercoat 1010‑1036 Chrome 1010‑1037 Black diamond edge

SUG. RETAIL $159.95 159.95 219.95

PART # DIMPLED 1014‑0157 1014‑0158

DESCRIPTION

SUG. RETAIL

Gloss black powdercoat Chrome

$129.95 129.95

EXHAUST

1014‑0006

1015‑0110

SEATS & SISSY BARS

FUEL/AIR SYSTEMS ENGINE DS‑288842 1014‑0093

DS‑288841

TRANSMISSION & DRIVELINE GASKETS & SEALS

BILLET AIR CLEANER INSERTS •Available in a variety of designs •Chrome finish unless noted •Sold each •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 99‑13 TWIN CAM ROUND AIR CLEANER (EXCEPT 08‑13 DYNA) 1014‑0007 Joker $69.95 1014‑0093 Finned (black) 69.95 1015‑0110 Finned 69.95

DS‑288831

1010‑0007 PART # DESCRIPTION SUG. RETAIL FOR 99‑13 TWIN CAM ROUND AIR CLEANER (EXCEPT 08‑13 DYNA) (CONT) DS‑288841 Flame $69.95 DS‑288842 Smooth 69.95 1014‑0006 Hot Head 69.95 1010‑0007 Ball‑milled 69.95

ELECTRICAL PART # DESCRIPTION SUG. RETAIL FOR 84‑99 EVOLUTION ROUND AIR CLEANER DS‑288831 Joker $79.95 DS‑288829 Flame 79.95 DS‑288832 Smooth 79.95

HANDLEBARS, CONTROLS & MIRRORS

LIVE TO RIDE AIR CLEANER INSERT

CABLES

•Die‑cast construction with chrome finish •Fits OEM oval air cleaner PART # 1014‑0039

LIGHTING

DESCRIPTION For 04‑13 XL

SUG. RETAIL $42.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1022‑0002

•Add a visual kick to your air cleaner or custom location of your choice •Aluminum base construction with stainless steel bottle opener •Base is ball‑furnished finish, bottle opener is polished finish •Installs using original air cleaner center mount bolt; mounting hardware for bottle opener included •Mounts in just minutes, adding both functionality and bling •Made in the U.S.A. DESCRIPTION For 99‑13 Twin Cam w/ stvock oval air cleaner cover

FOOTRESTS & LICENSE PLATE FRAMES

INJECTI‑COVERS™

STOP‑N‑POP BOTTLE OPENER

PART # 1014‑0110

1022‑0003

•Constructed from 16‑gauge cold‑rolled steel, polished, then chrome‑plated •Great looking covers hide the OEM throttle body •Offer a true custom look •Made in the U.S.A.

SUG. RETAIL 1022‑0003 $29.95

WHEELS & AXLES

NOTE: Covers may not fit with all styles of breather kits and support brackets. Check clearance before mounting. PART # 1022‑0002

DESCRIPTION For 01‑13 FXST/FLST, 04‑05 Dyna and 02‑10 FLT w/ Screamin’ Eagle air filter For 01‑13 FXST/FLST, 04‑05 Dyna and 02‑10 FLT w/ Forcewinder or D&M‑style air intake system

All part numbers in BLUE are new for 2013.

FRAMES, SUSPENSION & FENDERS

SUG. RETAIL $59.95 149.95

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

549


SECTION

7

WINDSHIELDS & FAIRINGS 1010‑1071

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

SMOOTH STYLE CARBURETOR COVER •Teardrop‑style design •Comes without element •Available in chrome finish or solid brass; solid brass covers are made from sheets of solid brass and are drawn and formed and then polished to a bright finish •Made in the U.S.A.

1015‑0099

PART # DESCRIPTION FOR S&S CARBURETORS ON 84‑91 BIG TWIN 1015‑0099 Chrome 1010‑1071 Brass

EXHAUST

SUG. RETAIL $87.95 199.95

PART # DESCRIPTION FOR S&S CARBURETORS ON 92‑06 EVOLUTION AND BIG TWIN 1010‑1072 Brass

SUG. RETAIL $199.95

0618‑0003

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

0618‑0004 0618‑0007

GASKETS & SEALS

0618‑0005

0618‑0006

0618‑0008

0618‑0010

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

0618‑0009 0618‑0011

0618‑0012

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

550

MACH 2™ AIR CLEANER INSERTS •Inserts are a direct replacement to your Küryakyn Mach 2 Air Cleaner (available from Küryakyn) •Pick your favorite design and create a truly custom look •Also have universal applications, just peel‑and‑stick almost anywhere there is a 41/2” diameter surface •Sold individually NOTE: Not recommended for use on engine cases. PART # GLOSS BLACK 0618‑0003 0618‑0004 CHROME 0618‑0005

DESCRIPTION Widow Zombie Gunship

SUG. RETAIL $18.95 18.95 19.95

PART # DESCRIPTION CHROME (CONT) 0618‑0006 Firefighter 0618‑0007 Deco 0618‑0008 Flame 0618‑0009 Widow

SUG. RETAIL $19.95 19.95 19.95 19.95

PART # DESCRIPTION CHROME (CONT) 0618‑0010 Zombie 0618‑0011 Chauvinist 0618‑0012 Patriot

SUG. RETAIL $19.95 19.95 19.95

1015‑0122

THROTTLE BODY COVERS •Mounts behind the air cleaner assembly •Cleans up the look and adds a chrome finish PART # DESCRIPTION 1015‑0121 For 02‑07 FLHT/FLHR/FLTR/FLHX, 01‑13 FLST/FXST, 04‑13 Dyna w/ EFI and Küryakyn Hypercharger™, Pro Series Hypercharger or Pro‑R Hypercharger 1015‑0122 For 02‑07 FLHT/FLHR/FLTR/FLHX, 01‑13 FLST/FXST, 04‑13 Dyna w/ EFI and Küryakyn air cleaner (except Hypercharger or Twin Velocity/Twin Velocity Plus), Arlen Ness Big Sucker Stage I or II air cleaner or Screamin’ Eagle Stage I air cleaner and Heavy Breather

All part numbers in BLUE are new for 2013.

SUG. RETAIL $49.95

49.95


SECTION

7

WINDSHIELDS & FAIRINGS TOURING 1011-0322 1011-0320

AUDIO & COMMUNICATION

1011-0319

1011-1203 1011-1902

LUGGAGE SEATS & SISSY BARS

1011-0318

1011-0784

EXHAUST FUEL/AIR SYSTEMS

1011-0321

ENGINE 1011-1067

TRANSMISSION & DRIVELINE

1011-0314

GASKETS & SEALS

1011-0313 1011-0317 1011-0312

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1011-0528 1011-0315

1011-1204

PREMIUM REUSABLE AIR FILTERS

1011-1943

1011-0316

•Durable epoxy-coated wire mesh designed to maximize airflow and provide peak filtration •100% reusable and washable •High-flow four-layer surgical-grade cotton filtration •Urethane body that won’t crack or curl like rubber •Precision hand-poured design •Made in the U.S.A.

CABLES

YEAR MODEL DRAG SPECIALTIES # K&N REF. # FOR BIG TWIN 99-13 Twin Cam (except 11-13 FXS, 12-13 FLS, 99-01 EFI, 08-13 Dresser/H-D FL Trike, 08-13 Dyna Glide, 08-11 FLSTSB) 1011-0320 HD1499 08-13 FLHT/FLHR/FLTR/FLHX/H-D FL Trike 1011-1203 HD-1508 08-13 FXD, FXDB, FXDC, FXDF, FXDL, FXDWG (except 13 FXSB) 1011-1902 HD-9608 99-01 88” Twin Cam (w/ Magneti-Marelli EFI) 1011-0322 HD8899 95-98 80” Evolution (w/ Magneti-Marelli EFI) 1011-0319 HD-1395 90-99 80” Evolution (carbureted) 1011-0318 HD-1390 86-89 80” Evolution (carbureted) 1011-0321 HD-2086X 02-13 V-Rod 1011-0784 HD-1102 FOR XL/BUELL 04-13 XL Evolution (except 13 1200V) 1011-1067 HD-8834 88-03 XL Evolution 1011-0317 HD-1388 96-02 Buell (except 96 S2/S2T, 00-02 Blast) 1011-0312 BU-1297 FOR AFTERMARKET AIR CLEANERS S&S “D” teardrop air filter 1011-0313 E-3224 S&S 6” x 2 3/16” air filter 1011-0314 E-3225 S&S Super E and G series carb air filter 1011-0315 E-3226 Screamin’ Eagle air filter 08-13 FLHTCUSE/FLHRSE 1011-1204 HD-0818 Screamin’ Eagle air filter Evolution Big Twin 1011-0316 HD-0600 Screamin’ Eagle air filter Twin Cam (except 08-13 Dresser, 08-13 Dyna) 1011-0528 HD-0800 Screamin’ Eagle air filter 08-13 Dyna 1011-1943 HD-0808 Screamin’ Eagle air filter 04-13 XL 1011-0783 HD-0900 Arlen Ness billet Sucker air filter Twin Cam (except 08-13 Dresser), Arlen Ness Stage 1 Big Sucker/Billet Sucker air filter for CV carb or Delphi EFI (except 08-13 Dresser) 1011-0528 HD-0800

All part numbers in BLUE are new for 2013.

BRAKES

1011-0783 OEM #

29461-99 29633-08 29191-08 29462-99 29291-95 29259-91A, 29330-96 29259-86 29437-01

SUG. RETAIL

$74.95 69.95 69.95 77.95 71.95 59.95 45.95 67.95

29331-04 29036-88/A/B, 29331-96 29239-96Y, P0213.9

67.95 65.95 54.95

29244-08 29055-89 29442-99A 29385-08 29044-04

31.95 31.95 31.95 52.95 45.95 47.95 37.95 64.95

29442-99A

47.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

551


SECTION

7

WINDSHIELDS & FAIRINGS TOURING 1011-0532

AUDIO & COMMUNICATION

1011-0533

1011-0332

1011-0328

LUGGAGE SEATS & SISSY BARS

1011-1061

1011-0557

1011-1289

1011-1409

1011-1278 1011-1121

1011-1725

EXHAUST E3226

FUEL/AIR SYSTEMS

HD-1388

1011-2898

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING

1011-2674

HD-1390

HIGH-FLOW REPLACEMENT AIR FILTER •Designed to increase horsepower and torque •Pleated media provides a large filtration area offering long service intervals •Application-specific sealing bead ensures an airtight fit •Multi-layers of woven cotton gauze media offers excellent filtration •American-made for over 40 years •Washable, reusable, pre-oiled and ready to ride •Made in the U.S.A. PART # SUG. RETAIL 1011-0328 $68.95 1011-0332 73.95 1011-0532 79.95 1011-0533 76.95 1011-0557 60.95 1011-1061 75.95 1011-1062 72.95

PART # SUG. RETAIL 1011-1068 $66.95 1011-1121 61.95 1011-1278 70.95 1011-1289 88.95 1011-1409 80.95 1011-1410 74.95 1011-1435 90.95

HANDLEBARS, CONTROLS & MIRRORS

PART # SUG. RETAIL 1011-1725 $61.95 1011-2359 76.95 1011-2674 59.95 1011-2850 48.95 1011-2898 81.95 BU-1297 69.95 BU-5000 73.95

HD-1395

HD-2086X HD-8899

PART # SUG. RETAIL DS-289057 $45.95 E-3224 47.95 E-3225 47.95 E3226 47.95 E-3250 50.95 E-3325 44.95 HD-0600 64.95

PART # HD-1388 HD-1390 HD-1395 HD-1396 HD-1499 HD-2084 HD-2085X

SUG. RETAIL $84.95 80.95 88.95 87.95 81.95 59.95 55.95

PART # SUG. RETAIL HD-2086X $62.95 HD-8899 94.95 RU-124 61.95 RU-1240PK 28.95

1011-0472

CABLES

BRAKES

1011-1159 DS-289499

TANKS & OIL FILTERS DASHES & GAUGES

DS-289498

1011-0471

1011-0658

1011-1345

DS-289504 DS-289509

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

552

DS-289507 DS-289506 DS-289505

DS-289508

NU-3428

AIR FILTER ELEMENTS •Top-quality replacement air filter elements from Uni, the OEM supplier to Harley-Davidson •Constructed of a unique, open-cell polyurethane material that allows maximum airflow while still providing superior filtration •Uni elements are available for a variety of Harley applications •For cleaners and filter care products see HARDWARE, CHEMICALS & TOOLS section •Sold individually •Made in the U.S.A. PART # SUG. RETAIL 1011-0471 $47.95 1011-0472 36.95 1011-0658 34.95

PART # SUG. RETAIL 1011-1159 $23.95 1011-1345 38.95 DS-289498 23.95

PART # SUG. RETAIL DS-289499 $27.95 DS-289504 18.95 DS-289505 19.95

PART # SUG. RETAIL DS-289506 $19.95 DS-289507 19.95 DS-289508 19.95

All part numbers in BLUE are new for 2013.

PART # SUG. RETAIL DS-289509 $18.95 DS-289510 25.95 DS-289511 25.95

PART # SUG. RETAIL DS-289513 $19.95 DS-289514 18.95 NU-3428 31.95


SECTION

WINDSHIELDS & FAIRINGS

AIR FILTER APPLICATIONS YEAR MODEL FOR BIG TWIN AND V-ROD 08-13 FLHT/FLHR/FLHX/FLTR and H-D FL Trikes 08-13 Dyna Glide (except 13 FXDB) 08-13 Twin Cam (EFI), 12-13 FLS, 11-13 FXS, 08-11 FLSTSB, 13 FXDB 02-13 V-Rod 99-13 Twin Cam (carb), 01-13 Softail EFI, 02-07 Dresser EFI and 04-07 EFI Dyna Glide 99-01 88” Twin Cam Fuel-Injected Dressers 95-98 80” Evolution Fuel-Injected 95-99 80” Evolution International 93-00 80” Evolution (except Fuel-Injected) 89-92 80” Evolution 86-89 80” Evolution 84-85 80” Evolution (except FLT, FLHT) 84-85 FLT and FLHT FOR XL 04-13 XL Evolution (except 13 1200V) 88-03 XL Evolution 86-87 XL Evolution 08-12 XR 1200/XR 1200X FOR BUELL 03-09 04-09 XB9/XB12/XB12S/SCG, 08 XV12SS/STT, 04-09 XB12R 00-09 Blast 96-02 S1, S2, S3, M2 (except 94-95 S1, 94-98 S2/S2T, 94-96 S3/S3T) 08-09 1125R/CR FOR AFTERMARKET AIR CLEANERS Edelbrock repl. air filter Edelbrock dual carb air filter Evo reverse tapered: 7” dia. (top) x 61/4” dia. (base) x 23/4” (tall) Evo reverse tapered: 7” dia. (top) x 61/4” dia. (base) x 31/4” (tall) Early Evolution model Screamin’ Eagle air filter (w/ lid); 7” dia. (base) x 7” dia. (top) Late Evolution model Screamin’ Eagle air filter (no lid) Screaming Eagle filter for 08-13 Dyna Screaming Eagle filter for 08-13 FLT, FLHT, FLHR, FLHX, FLTR Twin Cam Screamin’ Eagle tapered air filter (except 08-13 Dresser/Dyna) (no lid); 51/2” dia. (top) x 61/4” dia. (base) TC Screamin’ Eagle, Arlen Ness Stage II, Custom Evolution reverse tapered: 7” dia. (top) x 6” dia. (base) x 31/4” (tall) Screamin’ Eagle for 04-13 XL Screamin’ Eagle for 09-13 Ventilator element, 10-13 CVO Dresser S&S dual-throat carb air filter S&S “D” teardrop air filter; 21/16” (53.4mm) S&S Super E and G series carb air filter; 21/2” (63.5mm) S&S old style teardrop-shaped housing; 6” x 23/16” air filter 6” custom air filter Dragtron™ air filter Dragtron™ II air filter (5.25”) Drag 7” round air filter (DS-288998) Indian repl. filter 6” OD x 45/8” ID x 23/4” H fits stock S&S teardrop back and Indian teardrop over (Indian cover not included) 02-03 Indian Chief 1638 Mikuni 36-38mm dirt track air filter “D” Oval: 7” length; 10° angle; 21/8” flange Mikuni 36-38mm dirt track air filter oval; 7” L; 10 ° angle; 1” flange

K&N #

UNI #

OEM #

1011-1289 1011-1435 1011-2898 1011-0332 HD-1499 HD-8899 HD-1395 HD-1396 HD-1390 HD-1390 HD-2086X HD-2084 -

1011-1345 DS-289499 DS-289511 DS-289507 DS-289506 DS-289508

29633-08 29191-08 29314-08 29437-01 29461-99 29462-99 29291-95 29325-95A 29330-96 29259-89/91A 29259-86 29259-83A 29288-83

1011-0532 HD-1388 HD-2085X 1011-2359

DS-289510 DS-289505

29331-04 29036-88A/88B/29331-96 29036-86 29377-08

1011-0328 BU-5000 BU-1297 1011-1725

1011-0658 NU-3428 -

P0213.0248 P0213.T 29239-96Y P02131AMA

E-3250 E-3325 1011-1061 1011-1062 HD-0600 1011-1409 1011-1410

1011-0471 1011-0472 -

29055-89 29385-08 29242-08

1011-0557

-

29442-99A/B/C/D

1011-0533 1011-1068 1011-2674 E-3224 E3226 E-3225 DS-289057 -

DS-289513 DS-289514 DS-289504 DS-289498 DS-289509 1011-1159 DS-289504

29044-04B 29670-09 -

1011-1278 1011-2850 1011-1121 RU-124

-

01858 -

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

REPLACEMENT AIR FILTER ELEMENTS FOR SCREAMIN’ EAGLE® 1011-2054 AIR CLEANER •Premium pre-oiled direct replacement element for Screamin’ Eagle® kits •Each is handmade one at a time in a urethane body that won’t crack; four layers of surgical-grade cotton provide optimum air flow and protection •100% re-usable and washable •Available in red cotton and stainless steel; fit with original Screamin’ Eagle covers •Can also be used with Ness Stage I top cover for an exposed filter high-performance look; no other hardware necessary

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES

SUG. RETAIL $49.95 69.95

49.95 69.95

•Specially designed filter wrap made to extend the service interval of your K&N air filter when used in severe dusty or wet conditions •Made from durable polyester material containing uniform micron openings, the DryCharger® will stop small dirt particles and is water repellant, yet adds little restriction to 1011-1501 1011-1502 the airflow of your filter •Feature double-stitched elastic openings to secure drycharger in place •Designed to be run dry and can be cleaned with K&N filter cleaner •Custom fit to each application •Made in the U.S.A. SUG. PART # DESCRIPTION DRYCHARGERS 1011-1501 For Custom Evolution reverse tapered air filter, PART #1011-0533 1011-1502 For Twin Cam Screamin’ Eagle tapered air filter (except 08-13 Dresser/Dyna), PART #1011-0557 1011-1502 For 08-13 Touring Twin Cam Screamin’ Eagle tapered air filter, PART #1011-1410 PRECHARGER RU-1240PK Precharger for Mikuni 36-38mm dirt track air filters, PART #s 1011-1121 and RU-124

All part numbers in BLUE are new for 2013.

SIZE

RETAIL

7” dia. (top) x 6” dia. (base) x 31/4” (tall)

$33.95

51/2” 61/4” 51/2” 61/4”

dia. dia. dia. dia.

(top) x (base) (top) x (base)

33/4” inside width x 7” inside length (tall)

EXHAUST FUEL/AIR SYSTEMS

DRYCHARGERS

PART # DESCRIPTION FOR 99-10 FXST, 02-07 FLHT, 97-07 FXD/FXDWG 2110-9494 Red cotton 1011-1651 Stainless steel FOR 08-13 FLHT, FLHR, FLHX, FLTR AND H-D FL TRIKE MODELS W/ 58MM THROTTLE BODY 1011-2054 Red cotton 1011-2055 Stainless steel

7

31.95 31.95

28.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

553


SECTION

7

WINDSHIELDS & FAIRINGS

1010-0320 1010-0321

TOURING AUDIO & COMMUNICATION 1010-0318

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

NOSTALGIA VELOCITY STACKS •High-velocity stacks include backing plate with breathers and screen •CNC-machined billet aluminum •Available in chrome or black anodized finish •All mounting hardware included •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 93-06 BIG TWIN W/ CV CARB, 01-13 BIG TWIN W/ DELPHI EFI (EXCEPT 08-13 DRESSER AND H-D FL TRIKE) 1010-0319 Chrome $441.95 1010-0321 Black anodized 419.95

ENGINE

PART # DESCRIPTION FOR 99-06 TWIN CAM MODELS W/ S&S E/G CARB 1010-0318 Chrome 1010-0320 Black anodized FOR 91-13 XL 1010-0836 Chrome 1010-0835 Black anodized

SUG. RETAIL $441.95 419.95 441.95 419.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

VELOCITY STACKS •CNC machined from billet aluminum •Bolts directly to S&S Super E or G carb •No backing plate required •Chrome bolts and gasket included •Made in the U.S.A. NOTE: Breather systems must be purchased separately for models requiring one PART # FOR S&S E AND G CARBS 1010-1033

1010-1033 1010-1034

DESCRIPTION

SUG. RETAIL

Black

$189.95

PART # DESCRIPTION FOR S&S E AND G CARBS (CONT) 1010-1034 Chrome

SUG. RETAIL $199.95

7807-0005

CABLES

BRAKES TANKS & OIL FILTERS

7807-0006

DASHES & GAUGES

7807-0008

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

554

CHROME VELOCITY STACKS •Feature a one-piece breather/support bracket •No external breather lines are necessary •Available in short or long style •Includes velocity stack with screen, breather support bracket and hardware •Made in the U.S.A. PART # SHORT 7807-0004 7807-0005 7807-0006

DESCRIPTION

SUG. RETAIL

For 40mm CV carb or 01-13 Delphi EFI (except 08-13 FLHT, FLHR, FLTR, FLHX and H-D FL Trike) For S&S E and G carb For Mikuni 42/45/48 carb

$345.95 345.95 377.95

PART # LONG 7807-0007 7807-0008 7807-0009

DESCRIPTION For 40mm CV carb or 01-13 Delphi EFI (except 08-13 FLHT, FLHR, FLTR, FLHX and H-D FL Trike) For S&S E and G carb For Mikuni 42/45/48 carb

All part numbers in BLUE are new for 2013.

SUG. RETAIL

$372.95 372.95 404.95


SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1010-1124

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

1010-1122

BOSS DUAL VELOCITY STACK KITS •Delivers an aggressive, sinister style with maximum airflow •Fits with 5-gallon fuel tanks •Kits include carb support/backing plates, breathers and mounting hardware •Made in the U.S.A. PART # DESCRIPTION FOR 93-06 BIG TWIN WITH 40MM CV CARB OR 01-13 DELPHI EFI (EXCEPT 08-13 DRESSERS/H-D FL TRIKES) 1010-1122 3” Velocity stack, chrome 1010-1124 3” Velocity stack, black

SUG, RETAIL

$1,111.95 1,111.95

GASKETS & SEALS 1010-1125

PART # DESCRIPTION FOR 93-06 BIG TWIN WITH 40MM CV CARB OR 01-13 DELPHI EFI (EXCEPT 08-13 DRESSERS/H-D FL TRIKES) (CONT) 1010-1123 4” Velocity stack, chrome 1010-1125 4” Velocity stack, black

SUG, RETAIL

$1,146.95 1,146.95

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1010-0701

CABLES V-CLEANER VELOCITY STACKS

BRAKES

•CNC-machined 6061 billet aluminum •Available in chrome •Two sizes available: 2” and 4” •Breathers and mounting hardware included •Made in the U.S.A.

TANKS & OIL FILTERS

1010-0703

4” DEATH STACK

PART # DESCRIPTION FOR 93-06 BIG TWIN W/ CV CARB AND 01-13 MODELS W/ DELPHI EFI (EXCEPT 08-13 FLHT, FLHR, FLTR, FLHX AND H-D FL TRIKE) 1010-0912 2” FOR 93-06 BIG TWIN W/ S&S E AND G CARBS 1010-0701 4” FOR 93-06 BIG TWIN W/MIKUNI 42/45 CARBS 1010-0703 4”

SUG. RETAIL

$449.95 474.95

•Chromed, CNC-machined billet aluminum velocity stack •Incorporates crankcase breathers into the mounting bracket •Stack screws onto mounting bracket for clean installation •Made in the U.S.A. PART # 2106-1008

474.95

DESCRIPTION For 93-06 Big Twin w/ Mikuni HSR 42/45/48 carbs

SUG. RETAIL $326.95

VELOCITY STACK PRE-FILTER REPLACEMENT SCREEN FOR VELOCITY STACKS •Replacement debris-catching screen •Diameter measures 2.55” •Made in the U.S.A. PART # DS-288869

DESCRIPTION Repl. screen for velocity stacks

SUG. RETAIL $2.95

•Compatible with all RSD velocity stacks •Also fits on any 33/4” velocity stack •Hydrophobic manufacturing process repels water •Filters out larger particles of debris down to .005” •Uniform micron openings allow air in while keeping PART # DESCRIPTION debris and water out 1011-2763 Velocity stack pre-filter •Made in the U.S.A.

All part numbers in BLUE are new for 2013.

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS

SUG. RETAIL $19.95

COVERS, SECURITY & GENERAL

555

Harley-Davidson et Moto Custom Accessoires Echappement  

Pièces et Accessoires Moto Harley-Davidson Echappement pour Harley Davidson et Moto Custom Drag Specialties FatBook 2013 par US Dream Import...

Advertisement