LICENCE OF CERTIFICATION
First version granted:
2010-05-24 Licensee’s name and address
Marks covered by licence:
Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA Information regarding licensee/manufacturer Licensee’s technical officer
+ 358 20 129 211
+ 358 20 129 210
Place of manufacture
Product covered by the licence Type of product
Standard/Other normative document
Specification of product
Plastics piping systems for non-pressure underground drainage and sewerage – Polypropylene with mineral modifiers (PP-MD) according to annex 1. Approved raw materials and sealings according to annex 2.
The licensee above is hereby given permission to use the INSTA-CERT mark on or in connection with products, which fulfil the requirements of the standard or the normative document specified above (what is said in this document about INSTACERT mark will also be valid for marks defined in relevant SBC). The certification licence is valid on the condition that the licensee complies with the ”General rules for certification by partners of INSTA-CERT” (GRC) and the specific rules applying to certification of products of the type mentioned. The licensee is obliged to indemnify INSTA-CERT of any claim for damages or any other expenses to which partners of INSTA-CERT may become liable as a result of injuries caused by a product manufactured or sold by the licensee. This also applies to defective or faulty products.
The licence is valid for one calendar year and is automatically renewed for one year at a time, unless the licensee or member of INSTA-CERT gives at least three months’ notice to the contrary. The licence will be re-issued with an amended date and version number only if the content and/or conditions of the licence have been changed. The licence is not transferable.
MEMBER OF INSTA-CERT: INSPECTA SERTIFIOINTI OY
Anne Qvintus, Managing Director
Sivu 1 (1)
Licence of certification No.
Licensee Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD)
Test reports and other grounds for licence:
INSTA-CERT licences 4046 and 4064, SP F813915A, SP F813915B
Ring stiffness Application area Dimensions, mm - size group 1
SN 4 UD 110
Designation of production place