Page 1

LICENCE OF CERTIFICATION

Date:

No./Version:

2014-06-13

4075-04

First version granted:

2010-04-28 Licensee’s name and address

Marks covered by licence:

Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA Information regarding licensee/manufacturer Licensee’s technical officer

Jaana Hallikas

Telephone

Email Manufacturer

Telefax

+358 20 129 211

+358 20 129 210

jaana.hallikas@uponor.com

Place of manufacture

Vaasa, Finland

Product covered by the licence Type of product

Plastic piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE).

Standard/Other normative document

EN 13476

Specific rules

SBC 13476

Specification of product

Structured-wall PE pipes according to Annex 1. Approved raw materials according to Annex 2 (confidential). The licensee above is hereby given permission to use the INSTA-CERT mark on or in connection with products, which fulfil the requirements of the standard or the normative document specified above (what is said in this document about INSTA-CERT mark will also be valid for marks defined in relevant SBC). The certification licence is valid on the condition that the licensee complies with the ”General rules for certification by partners of INSTA-CERT” (GRC) and the specific rules applying to certification of products of the type mentioned. The licensee is obliged to indemnify INSTA-CERT of any claim for damages or any other expenses to which partners of INSTA-CERT may become liable as a result of injuries caused by a product manufactured or sold by the licensee. This also applies to defective or faulty products.

Unless terminated, the certification license will be automatically extended for one year at a time. The licence will be re-issued with a new “date of valid edition” only if the content and/or conditions of the licence have been changed. Termination may take place to the end of a year subject to three months’ notice on the part of the licence holder and the certification body The licence is not transferable.

MEMBER OF INSTA-CERT: INSPECTA SERTIFIOINTI OY

Tomi Kasurinen, Managing Director

INSTA CERT LICENCE Revision 6 of 2013-11-25


Annex 1

Sivu 1 (1)

Licence of certification No.

4075-04

Date

2014-06-13

Licensee Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA Trade name

Weholite

Material

PE

Wall construction

A2

Test reports and other grounds for licence: VTT-S-04015-09

PIPES: Ring stiffness

SN4 and SN 8

Application area Diameters/OD; mm - size group 2

UD 315

Application area Diameters/OD; mm - size group 2 Diameters/ID; mm - size groups 2 and 3

U 400

400 - 1200

SOCKET PIPES:

Ring stiffness

SN4 and SN8

Application area Diameters/OD; mm - size group 2

UD 315

Application area Diameters/OD; mm - size group 2

U 400

Diameters/ID; mm - size groups 2 and 3

400 - 1000

VTT-S-06020-10, VTT-S-06019-10

VTT-S-06611-10, VTT-S-06018-10

VTT-S-08108-10, VTT-S-03212-11

Profile for Uponor Denmark

Insta cert 4075 weholite pe pipes  

https://www.uponor.dk/-/media/country-specific/denmark-infra/download-centre/godkendelser/insta-cert-4075-weholite-pe-pipes.pdf?v=82ffb4e5-7...

Insta cert 4075 weholite pe pipes  

https://www.uponor.dk/-/media/country-specific/denmark-infra/download-centre/godkendelser/insta-cert-4075-weholite-pe-pipes.pdf?v=82ffb4e5-7...

Profile for uponordk