UK
6.4
Install Uponor Thermostat T-54 Public and T-55
Attach to wall
DE
The thermostats T-54 Public and T-55 can be attached to a wall with screws or adhesive strips, as shown in the illustration below.
6.5
Optional: install Uponor Relative Humidity sensor H-56
Register Uponor Relative Humidity sensor H-56 in Controller 1. Press and release the Test button on the controller. The test LED turns on. 2. Press the button of preferred channel or channels.
DK
The channel LED flashes. 3. Using a pointed instrument, gently press on the registration button of the sensor until the channel LED in the controller is constantly on. Attach to wall
Ø6
6×30
G00037A
FR
FI
ES
The RH sensor H-56 can be attached to a wall with screws or adhesive strips, as shown in the illustration below.
Note!
NL
IT
To avoid unnecessary alarms, make sure to fasten the cover correctly on the thermostat T-54 Public.
Ø6
6×30
SE
PT
NO
See chapter 7.23*** to activate Relative Humidity Control.
18
U P O N O R R A D I O 2 4 V, R O O M C O N T R O L S D E M · I N S TA L L AT I O N A N D O P E R AT I O N M A N U A L