actsafe
®
A0003AA
ACTSAFE PME, 4-stroke Engine: Honda GX35 Type: Forced air-cooled, four cycle OHC, single cylinder Displacement: 35 cc Output: 1,6 HP Ignition: Transistorized magneto Spark: CMR5H (NGK) Carburetor: Diaphragm type Clutch: Centrifugal clutch Gross Weight: 10,5 kg Reduction ratio: 43:1 Fuel tank: 0,65 lit. Recommended fuel: > 95 octane unleaded gasoline Recommended engine oil: SAE 10W-30 Rope grab: Component parts of stainless steel (chromated) and aluminum. 4212 anodized, equipped with a “back stop” Lubrication: Grease Interflon LS ˝ Speed of ascent: 19 m/Min. with 200 kg load 11 m/Min. with 400 kg load (with two ropes)
Standard approval: Certificates: The machine and the rope grab according to 98/37/EEC (machines), 89/686/EEC and 89/392/EEC, 91/368/EEC, 93/44/EEC, 93/68/EEC. CE-marked Carabiners according to EN12275 and EN362. CE-marked loops according to 89/686/EEC. CE-marked rope clamp according to EN567 (incl. The Emergency Kit). Recommended rope: Kernmantel rope / static / Ø 10 - 12 mm (11 mm is recommended), standard approved according to EN1891 and also approved for use by Act Safe Systems AB. - SINGING ROCK 11 mm The ActSafe PME is the basic product in a working method developed by Act Safe Systems. The method, together with the machine and product knowledge, demands trained personnel.
Safe Working Load: 200 kg (SWL) Rescue: 250 kg Max load: 300 kg
X0100XX
ACC POWER ASCENDER II Advantages with the ActSafe ACC power Ascender system The short set-up time involves that the work can be done in a manner that is quick, safe and less expensive than if performed with for example a sky lift. Clean and silent operation, ActSafe ACC is ideal for work and rescue indoors and in confined spaces. It is a light weight alternative to wire winches. The combination of the high lifting capacity and the sophisticated up/down control makes it perfect for lifting or dragging material and equipment. It is a versatile tool that can be used in places where it is impossible to use a sky lift or a powered platform.
Technical Data Ropes: The standard rope grab system allows static / semistatic rope 10-13 mm EN1891. The tactical rope grab system allows ropes from 7 to 9 mm. Max Working Load: The Safe Working Load (SWL) is 200kg. When used in a rescue situation with properly trained personnel the total load must not exceed 250 kg. However, if the load superseeds 265 kg, the overload is monitored electronically and the power is automatically switched off. Ascent and Descent Speed: The speed of ascent and descent can be continuously adjusted from 0 to 22 meters per minute. Speed and direction is controlled with one hand, you have always one hand free. If the battery runs out of power during ascent or descent the emergency descender can be used in order to get down. The descent speed is approximately 0,5 m/s Battery Life Time: The normal life time of the battery is 800 to 1000 charging cycles. Temperature Range: -10 °C to + 40°C Weight: 18 kg including the internal battery. Dimensions: 40 x 30 x 25 [cm]
49