TECHNICAL BULLETIN ULTERION 531 OPV WATER REPELLANT COATING PERFORMANCE FEATURES
Stand alone oil & water barrier Recyclable and Repulpable Excellent release properties Printable 30-Minute Cobb value of 20 or less Excellent Runabilty on Corrugators Slide Angle of 20 or greater FDA approve for food contact
Sustainable Containerboard Packaging Fish Poultry Producer Cooler Sustainable Folding Carton Deli Fast Food
Product Description Application Methods Ulterion 531 OPV is a low viscosity coating developed for oil resistance & water repellency. It has applications in moisture barrier coatings, cold release coatings, food packaging coatings, and others where water & oil holdout is a requirement and process-curing conditions are minimal. Ulterion 531 OPV provides the ultimate in water holdout. It’s high surface tension allows it to be used as a base coat as well as a top coat and to be double bumped for optimizing water holdout and OGR properties.
Typical Properties % Solids pH Odor Appearance Specific gravity Viscosity (cps) Origin
44 7-8.5 Mild Organic Milky Color 1.06 30 USA
FDA Status Ulterion 531 OPV is composed of ingredients, which are in compliance with FDA for direct Ulterion International, Inc. and indirect food contact. (21CFR 176.170 & P.O. Box 490 176.180) Pendergrass, GA 30567 Telephone (706) 693-4900 Fax (706) 693-0052
The information contained herein is thought to be accurate in all aspects; however, the applications for these products mentioned are presented without guarantee or responsibility as to the suitability of our products whether used singly or in combination with other products. Nothing herein is to be taken as a license to operate under or as a recommendation to infringe any patents. The products are sold without warranty, expressed or implied, and are purchased at buyer’s risk.
If a desired viscosity is required that is higher than the base polymer, we recommend Ulterion 200 LT, 205 LT, or 237 LT as the thickener of choice. It gives optimal thickening at a neutral pH that enhances runabilty of our coatings at the desired higher viscosities. The low viscosity of Ulterion 531 OPV makes it particularly suitable for air knife and on-machine applications such as size press or spray systems where adequate heat and drying follows.
Handling / Storage Stability The Ulterion 531 OPV is a made to order product, which should be kept in Cool dry conditions. Storage temperatures above 90°F will decrease the shelf life considerably. Optimal storage conditions will yield a shelf life of 60 days from the date of manufacture.
Product Safety When considering the use of Ulterion International products, please refer to the latest Material Safety Data Sheets (MSDS). If you require an MSDS for this product; please call Customer Service or your Ulterion International Representative.
Published on Feb 24, 2010
Published on Feb 24, 2010
www.ulterion.com Stand alone oil & water barrier Recyclable and Repulpable Excellent release properties Printable 30-Minute Co...