ULTERION® 5050 MP MODIFIED POLYMER PERFORMANCE FEATURES
De-linting Board smoothness Improved gloss Improved dry strength Improved porosity Base coat for premium topcoats Oil and grease topcoats Release topcoats FDA approved for food contact
Paper & paperboard sizing
Ulterion® 5050 MP is a modified polymer designed as a film former for use at the size press and calendar stack, or used as a binder in coating applications. Ulterion® 5050 MP exhibits excellent viscosity stability in all applications. It is not affected due to the physical stress of high-pressure sizing. Rheological properties are excellent for sizing under covenentional or high-pressure systems. These properties result in improved machine runnabilty and higher quality paper and paperboard. Ulterion® 5050 MP is completely compatible with all commonly used additives in size press, and coating applications.
Ulterion® 5050 MP is easily dispersed either through batch or jet cooking. It can be jet cooked at temperatures between 132°C 154°C at solids level of 15% or higher. It may also be batch cooked at temperatures above 90°C, and hold at least 15 minutes at solids levels up to 15%. Cooking solids should be kept as low as possible to optimize polymer solubilization.
Handling / Storage Stability Ulterion® 5050 MP should be stored in a cool, dry area for maximum shelf life.
Typical Properties Product Safety % Moisture pH @ 10%, Value Appearance Viscosity @ 10%, 85°C (RV1/20), cps Origin
< 12.5 7-8 White powder 10-120 USA
FDA Status Ulterion® 5050 MP is composed of ingredients, which are in compliance with FDA for direct and indirect food contact. (21CFR 176.170, and 21CFR 176,180)
When considering the use of Ulterion International products, please refer to the latest Material Safety Data Sheets (MSDS). If you require an MSDS for this product; please call (706) 654-2222 or your Ulterion International Representative.
Ulterion ® 5050 MP is composed of ingredients, which are in compliance with FDA for direct and indirect food contact. (21CFR 176.170, and 21...