Issuu on Google+

ULTERION® 126 BV BASE COATING MARKET USES

PERFORMANCE FEATURES  Wax-free  Excellent base coat for inks, water borne coatings, as well as UV top coatings*  UV fluorescent for easier registration  Porosity improvement  FDA approved for food contact

Handling / Storage Stability

Product Description Ulterion® 126 BV is specifically formulated for application on paper and paperboard using inline coater/dampeners flexo presses and flexo/gravure type coaters. It is primarily used as a base coat to seal between ink and functional top coats, such as UV coatings or other Ulterion International products* where drying capabilities are limited.

Typical Properties Viscosity, seconds (#3 Zahn cup @ 70°F) pH, Value Solids, % VOC, lb/gal. Density, lb/gal. Freeze/Thaw Stability

 Repulpable/Recyclable  Beverage board  Bakery packaging

15 – 20 7.0 – 9.0 36 – 38 0.5 8.4 – 8.6 One Cycle

FDA Status Ulterion® 126 BV is composed of ingredients, which are in compliance with FDA for direct and indirect food contact, (21 CFR 176.170 with limitations, and 176.180 dry film).

Application Methods Application Viscosity: Use as received and stir. Recommended application temperature: 65-75°F. A viscosity reduction with water may be required for certain equipment in order to achieve optimum results. This should only be with Ulterion International’s technical advice.

Coating Weight: Depending on substrate and application the recommended minimum coat weight should be one (1) lb/MSF (Wet). Drying: Sufficient volumes of warm air, and medium or short wave I.R. Load temperatures should range between 95°F and 105°F. Additional curing will continue over time.

The recommended shelf-life is six months when stored at normal (68-75°F) room temperature. Cleaning is best accomplished before coating dries. Use water and liquid detergent.

Product Safety When considering the use of Ulterion International products, please refer to the latest Material Safety Data Sheets (MSDS). If you require an MSDS for this product; please call (706) 654-2222 or your Ulterion International Representative.


Ulterion 126 BV