Geno's Garage Catalog 120 - Spring 2023

CALL GENO’S GARAGE!

You never know where you’ll find a bit of inspiration or insight.

The hand towel at the vacation-area gift shop asks the question, “What now?”

For the cover of this catalog we used a seasonal theme and we had our art-guy (Bob Pierce) capture the typical Ram/ Cummins owner. In this scene he finally comes to the realization that he needs a new seat cover and seat cushion. “Uh, oh!!! What now?”

And the answer: Call Geno’s Garage.

Hey, here is the number: 770-886-2500. Hey, a real person will answer the phone. Hey, we’ll help you rebuild the driver’s seat and get the truck ready for warmer weather. (Think: Maintenance items, filters and such.)

One more time...Call Geno’s Garage: 770-886-2500!

And, “Thank You!” for your consideration and patronage.

6.7L EGR Cleaning KitS

‘07.5-‘22, 6.7L ‘07.5-‘22, 6.7L ‘13-‘18, Cab/Chassis with Crankcase Vent Filter without Crankcase Vent Filter EGR3-A (Filter): $168.00

EGRKIT-1: $159.00 EGRKIT-2: $55.50

EGR3-B (without Filter): $64.50

Using your trusty Owner’s Manual you may have noted that changing-out the crankcase vent filter (CCV) is a required service at the 67,500 mile interval. Further, for those 2007.5-2012, 2500/3500 pickup truck owners [the non-diesel exhaust fluid (DEF) style aftertreatment] there is also a “clean the exhaust gas recirculation (EGR) valve and cooler service” required. The ‘07.5-Current Cab and Chassis trucks and ‘13-Current 2500/3500 use the DEF exhaust aftertreatment. Looking closely at their Owner’s Manuals reveals that a CCV filter change is also required at 67,500 miles, However, the cleaning of the EGR valve and EGR cooler is not a requirement. We asked the folks at Cummins and they responded that you may wish to include the cleaning, but it is typically not needed until the second crankcase vent filter change at 135,000 miles. They did suggest an inspection of the EGR valve. “Sooty/dusty is good, shellac/crusty needs to be cleaned.” If the valve is shellac/crusty, don’t skimp, go ahead and do the entire EGR system cleaning.

If you price the EGR Cleaning Kit parts over-the-counter at Mopar the cost is over $250 plus $40 for the cleaning solution. We would suggest using the Cummins equivalent parts for the gaskets and filter that are needed. We would suggest using Simple Green (it smells just like the Mopar cleaner) or Purple Power as your cleaning solution.

Our revised 6.7L EGR Cleaning Kit contains the following:

(1) Large Exhaust Manifold Gasket • (2) EGR Valve Gaskets • (1) EGR Butterfly Gasket • (1) Exhaust Manifold Gasket

(4) EGR Plumbing Gaskets • (1) Airhorn Gasket • (2) Rubber Plugs • (3) Coolant O-rings

Freddie knows that if you are going to spend time cleaning the EGR valve and EGR cooler, that you’ll remove and clean the intake air horn that the EGR valve is bolted to. The replacement gasket for air horn-to-intake manifold is 5264566 and it is included in our EGR Cleaning Kit. Additionally our kit has thorough instructions for removal of the parts and tips on best method(s) for cleaning.

Finally, Freddie Frugal adds two rubber plugs for the ends of your cooler assembly so you don’t waste cleaning fluid. Fill up the cooler, cap it off, and soak it overnight. Use the caps to shake the cooler with the cleaner inside.

Filter Maintenance Kits,

‘19-‘23, 6.7L MK2019: $294.95

(4) LF16035; (2) FS_MOP68157291;

(2) FS_MOP68436631AA; No Air Filter

‘13-‘18, 6.7L MK2013: $292.95

(4) LF16035; (2) FSMOP68157291;

(2) FS_MOP68197867; No Air Filter

‘10-‘12 , 6.7L MK2010N: $187.95

(4) LF16035; (2) FS_MOP68157291; No Air Filter

‘07.5-‘09, 6.7L MK2007: $140.95

(4) LF16035; (2) FS43258; No Air Filter

‘03-‘07, 5.9L MK2003: $92.95

(4) LF16035; (2) FS19856; No Air Filter

‘00-‘02, 5.9L MK12626: $110.95

(4) LF16035; (2) FS19855; (1) AF-4189

‘97-‘99, 5.9L MK12627: $125.95

(4) LF16035; (2) FS19598; (1) AF-4189

‘94-‘96, 5.9L MK12628: $116.95

(4) LF16035; (2) FS1253; (1) AF-4189

‘89-‘93, 5.9L MK12625: $90.95

(4) LF16035; (2) FS1232; No Air Filter

All 4/2 and 4/2/1 Maintenance Kits use the Cummins StrataPore oil filter and either a Cummins, or Mopar branded fuel filter (same filter, but we offer you the less expensive item).

We took time to analyze the filter purchasing quantities of our customers. Predictably, in a given 30,000 mile maintenance interval, the oil filter is changed four times, the fuel filter two times, and the air cleaner is changed once. We’re pleased to offer this commonsense idea in a prepackaged kit for your Ram Cummins Diesel truck.

QUICK SERVICE FILTER KITS

Is it time to replace the filters in your ‘89-’23 Ram/Cummins Turbo Diesel truck? Get our Quick Service Kits that include filters for one service change.

‘19-‘23, 6.7L QSK1006: $164.95

AF-53034051AB Air Filter

LF-5083285AA Oil Filter

FS_68157291AA Fuel Filter

FS_68436631AA Fuel Filter

‘13-‘18, 6.7L QSK1005: $163.95

AF-68517554AA Air Filter

LF-5083285AA Oil Filter

FS_68157291AA Fuel Filter

FS_68197867AB Fuel Filter

‘19-‘23, 6.7L QSK1004: $129.95

LF-5083285AA Oil Filter

FS_68157291AA Fuel Filter

FS_68436631AA Fuel Filter

‘13-‘18, 6.7L QSK1003: $128.95

LF-5083285AA Oil Filter

FS_68157291AA Fuel Filter

FS_68197867AB Fuel Filter

‘19-‘23, 6.7L QSK1002: $116.95

FS_68157291AA Fuel Filter

FS_68436631AA Fuel Filter

‘13-‘18, 6.7L QSK1001: $115.95

FS_68157291AA Fuel Filter

FS_68197867AB Fuel Filter

OIL FILTERS

MOPAR - Oil/Standard Filter (‘89-‘23, 5.9L & 6.7L ) This filter can be used on ALL ‘89-‘23 Turbo Diesel engines. The advantage of this filter is the fluted can which simplifies removal from underneath using the Lisle End Cap Filter Wrench (#LC61580) H TDR71, p60-69

Cummins - Oil/StrataPore (‘89-‘23, 5.9L & 6.7L) This filter can be used on ALL ‘89-‘23 Turbo Diesel engines. The advantage of this filter is the fluted can which simplifies removal from underneath using the Lisle End Cap Filter Wrench (#LC61580)

Cummins - Oil/Standard (‘89-‘23, 5.9L & 6.7L)This filter can be used on ALL ‘89-‘23 Turbo Diesel engines. The advantage of this filter is the fluted can which simplifies removal from underneath using the Lisle End Cap Filter Wrench (#LC61580)

-

(‘94-‘96) (Also for Prime-Loc on 12-valve engines, ‘94-‘98)

Cummins - Fuel Filter (‘89-‘93) Does not use Water/Fuel sensor.

sensor.

Cummins - Fuel Filter For Prime-Loc on 24-valve engines up to 2002 and our FFK98599 filter kits.

MOPAR - Fuel/Water Separator (Chassis Mounted ) (‘19-‘22, 6.7L, 2500/3500/4500/5500 & ‘20-‘22 1500 EcoDiesel trucks.)

$49.95 Cummins - FASS Fuel/Water Separator 0lder Titanium 95 Series only with red or blue “T” block assembly. Replaces WS2001/FS19768

- FASS Fuel/Water Separator Older Titanium 95 Series only with red or blue “T” block assembly. (3 micron) Replaces FF2003

$14.95

If purchasing fuel filters for your ‘10-‘12 truck, we recommend the NanoNet filters.

FUEL FILTERS

Cummins - FASS 150 HD Series Works with FS1001 filter. Replaces FF1003 Water Separator

FASS - 150 HD Series Large filters - 8” tall. (3 micron) Titanium Series - Extended length extreme service filter.

FASS - 150 HD Series Large filters - 8” tall. (3 micron) Replaces HF6604 & FF1003 Water Separator

Cummins - FASS Titanium & Platinum Series

Titanium & Platinum Series only with black or gray “T” block assembly. (2 micron) Fuel filter and water separator.

FASS - Signature Series Paticulate Filter Signature Series with black “T” block and Legacy Series with gray ‘T’ block.

FASS - Signature Series Paticulate Filter XL Signature Series with black “T” block and Legacy Series with gray ‘T’ block.

Replaces FS-1001 and only works with XWS-1002 filter.

HF6604: $48.95

XWS-3002-XL: $32.30

XWS-1002: $38.00

XWS-3002: $29.45

PF-3001: $20.90

PF-3001-XL: $23.75

FASS - DRP In-line 5/16” Pre-Filter For DRP-02 fuel pumps. NA-33007: $5.50

Donaldson Fuel/Water Separator

For FASS Platinum High Pressure Fuel Pump and newer Titanium fuel pumps. (FASS-P-D07-095G, FASS-P-D08-095G, FASS -T-D07-095G & FASS-T-08-095G)

Universal In-line Fuel Filter Screen This 3/8” filter required when using the DDRP with Vulcan Relo Kits.

P553203: $31.95

FF5079: $8.95

Adapter Nipple Required to use XWS-3002 on Red ‘T’ Block and Blue ‘T” block assemblies. FSN-2001: $7.09

TRANSMISSION FILTERS

MOPAR - Transmission Filter, Aisin AS69RC (‘13-‘23)

MOPAR - Replacement Transmission Sump Filter, 68RFE (2WD) (‘07.5-‘09, 6.7L) This transmission pan does not require a gasket. Use RTV silicone or sealant only.

Filter, (68RFE and Mag-Hytec pan) (‘07.5-‘23, 4WD) & (‘10-‘22, 2WD) with 6.7L engine. This transmission pan does not require a gasket. Use RTV silicone or sealant only.

MOP-68224232: $67.95

SERPENTINE BELTS

GATES - Serpentine Belt (A/C & Single Alternator) (‘13-‘18, 6.7L)

GATES - HD Serpentine Belt (assumes A/C) (‘03-‘12, 5.9L & 6.7L) See Accessory Drive Belt Kits, page 25 & 26.

GATES - Serpentine Belt (non-A/C) (‘03-‘09)

CUMMINS - Serpentine Belt (assumes A/C) (‘03-‘07, 5.9L) with Jacobs Brake

GATES - HD Serpentine Belt (assumes A/C) (‘94-‘02) See Accessory Drive Belt Kits, page 21.

GATES - Serpentine Belt (non-A/C) (‘94-‘02)

GATES - HD Serpentine Belt (assumes A/C) (‘91.5-‘93) Intercooled

GATES - Serpentine Belt (non-A/C) (‘91.5-‘93) Intercooled

GATES - HD Serpentine Belt (assumes A/C) (‘89-‘91) Non-intercooled

GATES - HD Serpentine Belt (non-A/C) (‘89-‘18) Non-intercooled & no air-conditioning

MOPAR - EcoDiesel Serpentine Belt (‘14-‘23, 3.0L) Ram 1500 EcoDiesel

GATES - EcoDiesel HD Serpentine Belt (‘14-‘23, 3.0L) Ram 1500 EcoDiesel

$84.95

GATES-K081243HD: $35.95

GATES-K081264HD: $49.95

GATES-K081102: $32.95

BELT-3947077: $105.95

GATES-K080810HD: $33.95

GATES-K080653: $29.95

GATES-K080830HD: $45.95

GATES-K080635: $30.95

GATES-K080816HD: $42.95

GATES-K080645HD: $27.95

4627897AB: $23.40

GATES-KO60812HD: $24.95

GASKETS & SEALS

Upper engine gasket kits include a standard thickness head gasket. Please check our website for all gasket kit contents.

GASKETS & SEALS

1994-2002

2003-2009

2010-2012

COVERCRAFT & MOPAR

COVERCRAFT

‘10-‘12, 2500/3500

WINTER_FR_10: $109.95

MOPAR ‘03-‘09, 2500/3500 ‘07, 3500 CC

‘08-’10, 3500/4500/5500 CC

82208646: $132.00

COVERCRAFT ‘03-‘09, 2500/3500

WINTER_FR_0309: $109.95

COVERCRAFT ‘94-‘02, 2500/3500

WINTER_FR_9402: $109.95

Improve engine warm-up time in cold weather with a Covercraft or Mopar winter grille cover for your ‘94-‘12 Ram Cummins truck. In summer the cover is rolled up and acts as a bug screen to help keep the radiator free-flowing for better cooling.

The grille cover is made of black vinyl and goes over the front core support. The material rolls up and down so you can adjust the amount of air you want to pass through the radiator.

A/C Condenser Guard I

‘13-‘18, 6.7L

WD_COND_GR_13: $54.95

‘10-‘12, 6.7L

WD_COND_GR_10: $54.95

‘03-‘09, 5.9L & 6.7L

WD_COND_GR_0307: $54.95

‘94-‘02, 5.9L

WD_COND_GR_9402: $54.95

The air conditioning condenser on the ‘94-‘18 Dodge Ram has no protection coming from the factory and may be subject to costly damage. The condenser guard addresses this by covering the condenser in full with a black powdercoated 16 gauge guard with 1/2” perforated holes for maximum air flow. The condenser guard has a U-shaped lip that covers the top of the condenser’s fins to keep them from being bent.

Installation for ‘94-‘09 trucks is straightforward and takes only minutes. The lip of the condenser guard is put on top of the air conditioning condenser and secured at the bottom with zip ties.

On the ‘10-‘18 trucks the grille has to be removed (instructions show you how) to install the guard. Since the grille has to be removed we strongly suggest purchasing our Quick Grille Release Kit (#QGKT) so that future access to the area becomes a 5-second proposition.

A/C CONDENSER/INTERCOOLER Guard, ‘13-’18

‘13-‘18, 6.7L CONDENSER/INTERCOOLER GUARD KIT GG-CD-IC4G: $87.95

( Includes (1) WD_COND_GR_13 and (1) GG-ICGUARD)

‘13-‘18, 6.7L INTERCOOLER GUARD

GG-ICGUARD: $49.95

The intercooler in the ‘13-‘18 trucks is now located beneath the radiator rather than behind like the ‘10-‘12 trucks. This guard is similar to our condenser guard and protects the intercooler from damage by road debris.

If you already have the A/C condenser guard in your truck, you can add the intercooler guard.

Save when you buy the condenser and intercooler guard together!

Quick Grille Release Kit (‘10-‘18)

QGKT: $26.95

H TDR71, p141-143 I

p

Left side covered up/Winter Front. p Right side unrolled/Bug Screen.

Ram Cummins/ Ram EcoDiesel

Winter Front/ Bug Screen (‘10-‘21)

‘19-‘21, 2500/3500/4500/5500 - MOPAR 82216096AA: $109.95

‘10-‘18, 2500/3500

‘11-‘18, 3500/4500/5500 CC - MOPAR 82212217AD: $173.95

‘14-‘20, EcoDiesel (old bodystyle) - MOPAR 82213959AC: $129.95 Closeout!

‘14-‘18, EcoDiesel GG-WFED14: $99.95 Closeout!

This exterior mount winter front/bug screen installs outside the engine compartment and fits over the truck’s grill. Fasten and unfasten the velcro to roll and unroll it.

Since 1994 and the Second Generation truck, with its grille attached to the hood design, Turbo Diesel owners have come to expect easy access to the radiator as well as access to the engine.

No more with your ‘10-‘18 truck? Hold on, we’ve corrected this design flaw/service access problem with the Quick Grille Release kit for Fourth Generation trucks.

The Quick Grille Release Kit is a simple collection of hardware store parts, but we’ve made refinements by sourcing tether-type release pins. Use the bumper as a step again with this kit. Installation instructions included.

*Will not work on ‘19+ 1500/2500/3500 or 14-‘18 EcoDiesel trucks.

Available in Black only.

Shown uncoated for clarity.

24” X 24” nylon mesh bug screen included with each Condenser Guard

Grille must be removed to install the Winter Front on ‘10-‘12 trucks.

1994-2002

OEM ENGINE BLOCK HEATER and cables

‘89-‘98, 12V GG-3500030: $76.95

‘98.5-‘23, 5.9L & 6.7L 24V GG-3500022: $59.95

cummins ENGINE BLOCK HEATERS

CUMMINS ‘89-‘98, 12V 3916127: $118.95

Cab Fresh Filter KitS

Cab Fresh Filter Kit (‘19+, 2500/3500/4500/5500)

CFF-DG-19020K: $65.00

Cab Fresh Filter Kit (‘10-‘18)

CFF-DG-19009K: $59.00

Cab Fresh Filter Kit (‘03-‘09)

CFF-DG-19003K: $59.00

Cab Fresh Filter Kit (‘94-‘02) V

CFF-DG-0610K: $56.00

Replacement Filters (‘19+, 2500/3500/4500/5500)

CFF-DG-19020R: $18.95

Replacement Filters (‘10-‘18)

CFF-DG-19009R: $17.00

Replacement Filters (‘03-‘09)

CFF-DG-19003R: $17.00

Replacement Filters (‘94-‘02)

CFF-DG-0611R: $16.00

This easy to install dual-stage filtering system helps remove dirt and dust and keep it from getting into the interior of your truck. It fits over the factory vents underneath the hood.

Attention 4G Owners: Best Seller!

INTERIOR Cabin Filter Kit (‘10-‘18)

CABIN FILTER KIT

GG-CFF1012: $32.95

REPLACEMENT CABIN FILTERS (‘10-‘18)

‘10-‘18 CARBON NA-4578: $14.95

‘10-‘23 OEM PAPER 68548579AA: $21.95

‘10-‘23 HEPA 6090CRBE: $14.95 NEW!

Are you getting poor airflow from the HVAC system or are you simply wanting to keep the interior dust-free in your truck? Add this cabin air filter with carbon filter prior to the HVAC blower motor box to keep the honeycomb grill that covers it free of blockage caused by excess dust.

Installing this filter is an easy project. To install the filter into the interior air box requires the use of either a hot butter knife (box cutter heated with a torch), a Dremel tool with a cut-off wheel, or a small saw blade to cut the opening shown in the included instructions. Our installation instructions describe the steps in detail. You’ll cut out an opening in the dash, slip the filter into the slot, and close it off with a Mopar filter door.

NOTE: Some ‘16-‘18 trucks may already have the filter kit installed. You may only need a replacement filter. Check before ordering.

All 2019-newer trucks have the filter kit installed from the factory.

CUMMINS ‘98.5-‘23, 5.9L & 6.7L 3975628: $52.95

These engine block heaters are threaded directly into the engine block on the passenger side. Rated at 750w.

NOTE: Before ordering this product double-check to see which engine block heater your truck is equipped with. There is some overlap of years where the ‘94-‘98 Turbo Diesel trucks use either of the engine block heaters.

Cummins Engine Block Heater Cables

‘89-‘23, 2500/3500/4500/5500

‘14-‘21, 5.9L & 6.7L (6ft. cable.) Ram 1500 EcoDiesel (5ft. cable.)

HEATER_CABLE_FL: $24.95 ECO_ HEATER_CABLE_FL: $19.95

Don’t be left out in the cold! Make sure your Ram Turbo Diesel has a block heater cable so you can warm the engine for easy starting in cold weather.

The engine has the block heater installed, but many times the dealers did not order the engine block heater cable with the trucks.

HEATER CABLE PLUG COVER, ‘89-’23 360-0012: $5.95

Help keep the elements out of the heater cable connection.

Block Heater Bumper PlugS

‘19-‘23 2500/3500 6.7L

WD-BHP-20: $55.95

(Cutting of lower bumper plastic grille required for installation.)

‘10-‘18

WD-BHP-10: $53.95

‘03-‘09

WD-BHP: $53.95

‘94-‘02 NON-SPORT

WD-BHP9402: $53.95

‘89-‘23 Universal Fit (Plug only.)

WD-BHPPL: $43.95

(This kit does not include mounting brackets. Fits Ram Cummins and Powerstroke trucks.)

‘89-‘23 Universal Fit (Plug with mounting brackets)

WD-BHPUNI: $53.95

(This kit fits Ram Cummins and Powerstroke trucks with aftermarket bumpers.)

Install an Excelsior Block Heater Bumper Plug on your truck, and you have the heater connection located in a fixed position right up front behind a flip-open, weatherproof cover. To install, remove the old block heater cable from the engine block and plug the new cable in.

*NOTE: Will not work on ‘14-‘22 Ram 1500 EcoDiesel trucks.

Installs in front bumper. ‘10-‘18 style shown.

The Block Heater Bumper Plug has the heater cable attached for quick and easy installation.

‘03-‘09 shown.

V I H TDR74, p48-49

Hood Insulation Liner

‘94-’02, 2500/3500 ‘94-’01, 1500

‘03-’09 coming soon

The two primary purposes of your truck’s hood insulation liner are to help absorb engine noise, and to insulate against heat transfer to the hood. Over time, the liner will stain, snag and tear, diminishing the overall appearance of the engine compartment, but more importantly, reducing the hood liner’s effectiveness for noise and heat reduction.

Replace your truck’s old and worn hood liner with this direct replacement hood insulation liner. We’ve had it designed and cut just right, specifically to fit your 1994-2002 Dodge Ram 2500/3500 (also fits 1994-2001 Dodge 1500). For a quick and simple installation, we include all new secure mounting clips.

Available in two styles.

Mounting hardware included.

Standard Fiberglass Style GG-HIL9402-R: $59.95

Our 1/2” thick fiberglass non-lined hood liner is similar in density and thickness to the OE molded version.

Polyurethane heavy-duty Engine Mounts (‘89-’93)

PB2710: $149.95 pair

These are solid polyurethane inserts with an internal locking system where the factory ones have an external safety lock. Features stainless steel hardware. Fits all Dodge pickups equipped with the Cummins engine from ‘89-‘93. Mounts: 3” x 3-1/2” and 1-3/4” thick.

Polyurethane heavy-duty Engine Mount insertS ‘94-’02

PB2453KIT: $199.95 pair

These are a solid polyurethane mount where the factory ones are rubber with gapped holes in them. These are not inserts that fit inside the stock rubber, but a replacement for the whole rubber mount. To install, remove the old rubber from the engine mount and replace with these.

Motor Mount REINFORCEMENTS

‘98.5-‘02, 24V ES_51116G: $60.93

‘94-‘98, 12V ES_51114G: $71.52

Motor mount inserts sold in Black only.

NOTE: These are not replacement bushings, just reinforcements.

Foil-Lined Style GG-HIL9402-F: $149.95

Our New Foil Lined Hood Insulation features a 1/2” thick insulation pad sealed on both sides with Aluminum Foil. This Aluminum Foil greatly increases its heat rejection, sound deadening, overall durability and it looks good!

HEAVY-DUTY REAR ENGINE/TRANSMISSION POLYURETHANE MOUNT (‘89-‘02, 2500/3500)

‘94-‘02 PB2852 $99.95 ‘89-‘93 PB1604 $30.95 pair (‘89-‘93 4x4 only)

This heavy duty, polyurethane bushing is a direct replacement for the stock mount. Fits in the same location, easy to install.

cummins REAR frost plug plate

‘89-‘02, 5.9L

Rear coolant frost plug plate

BD-1040022: $60.95

‘03-‘18, 5.9L & 6.7L

Rear coolant frost plug plate

BD-1040023: $60.95

Repair a leaky rear frost plug on the rear of the engine without having to hammer out the old leaking frost plug or remove the engine.

The rear plate seals with a large O-ring on the OEM-machined face at the rear of the motor. While the frost plug plate can be installed with the transmission in place, it is recommended installing the rear frost plug plate with the transmission removed.

PB2852 shown

Standard fiberglass style shown

Harmonic Dampers

When was the last time you thought about the crankshaft vibration damper on your Dodge Cummins Turbo Diesel? We will bet you did not know that your Owner’s Manual suggests that you inspect the damper every 30k, 60k, 90k, etc. miles. Get a reduction in noise, better idle quality, less clutch/gearbox chatter (manual trans), and less vibration when accelerating in the 2000rpm to 3000rpm speed zone.

‘07.5-‘22, 6.7L FLUID_ 920321: $630.70

‘03-‘07, 5.9L FLUID_ 920301: $630.70

‘98.5-‘02, 24V FLUID_ 960301: $563.55

‘94-‘98, 12V FLUID_ 960311: $630.70

(# 960311 Includes Sensor Kit 300003)

Drill Pin Kit, All Years

FLUID_300002: $67.15

( Adds extra pins between the damper and the crank. Used on high horsepower trucks that exceed 3500 rpm in order to additionally secure the damper to the crankshaft.)

LEARN MORE: HARMONIC DAMPER https://www.genosgarage.com/downloads/TechPDF/TDR114-Installing-Fluid-Dampr.pdf https://www.genosgarage.com/downloads/TechPDF/TDR73_HarmonicDamper.pdf

oem Vibration DamperS

The Cummins/Mopar vibration dampers are OEM replacements and are not designed for hi-performance applications.

Intercooler Hoses

Replacement intercooler hoses feature an exclusive Viton inner liner to better withstand high heat and contamination. Hoses are rated for 145 psi and are sold individually.

‘94-‘02 Pipe to Intercooler (Hot Side) 45° elbow

‘94-‘02 Intercooler to Pipe (Cold Side) 45° elbow

‘03-‘09 Pipe to Intercooler (Hot Side)

‘03-‘09 Intercooler to Pipe (Cold Side)

‘94-‘96, 5.9L (built after 10-3-95) Pipe to Engine (Cold Side)

‘97-‘09, 5.9L & 6.7L Pipe to Engine (Cold Side)

‘97-‘98, 5.9L 12V Turbo to Pipe (Hot Side)

‘94-‘96, 5.9L (built after 10-3-95) Turbo to Pipe (Hot Side)

‘98.5-‘02, 5.9L 24V Turbo to Pipe (Hot Side)

‘97-‘02, 5.9L 12V & 24V Pipe to Engine (Cold Side)

‘94-‘96, 5.9L (built before 10-2-95) Pipe to Engine (Cold Side)

‘94-‘96, 5.9L (built before 10-2-95) Turbo to Pipe (Hot Side)

‘03-‘09, 5.9L & 6.7L Turbo to Pipe (Hot Side)

‘07-‘09, 5.9L & 6.7L Pipe to Engine (Cold Side)

‘10-‘12, 6.7L Intercooler to Pipe (Cold Side)

‘10-‘12, 6.7L Pipe to Engine (Cold Side)

‘10-‘12, 6.7L Pipe to Intercooler (Hot Side)

‘10-‘12, 6.7L Turbo to Pipe (Hot Side)

‘13-‘18, 6.7L Intercooler Pipe to Engine (Cold Side)

intercooler hose kits

‘10-‘13, 6.7L

$383.95

Killer Dowel Pin Kit (‘89-‘02)

‘94-‘98, 12V - STRAIGHT TAB

TST-KDP03: $65.00

‘89-‘93 / ‘98.5-‘0 2, 24V - BENT TAB

TST-KDP04: $65.00

The dowel pin used in the Cummins engine can back out of its bore. When it does, it can fall into the camshaft gear and cause all types of expensive engine damage.

The folks at TST Products have developed a kit to cover the dowel pin and prevent its movement. The kit is inexpensive protection. However, the labor involved to access the KDP and cover it with the cover tab is time consuming. Fortunately clear instructions make it a job that the D-I-Yer can handle.

LEARN MORE: KILLER DOWEL PIN

https://www.genosgarage.com/downloads/TechPDF/TDR57_KillerDowelPin.pdf

6.7L

5.9L

5.9L

Black Nomex Silicone intercooler hoses designed for 75 psi of turbo boost with spring-loaded clamps to hold them in place.

GATES-26229: $155.95

GATES-26232: $149.95

Clamps included with each hose.

GATES-26230: $42.95

2.75”

BD-1405209: $21.95

3.00”

BD-1405211: $21.95

GATES-26231: $115.95

GATES-26224: $87.95

GATES-26237: $51.95

GATES-26233: $48.95

GATES-26234: $49.95

GATES-26235: $84.95

GATES-26235C: $84.95

3.50”

BD-1405212: $21.95

These clamps are designed to be used where high boost levels require a hose clamp that can provide extra holding power.

$21.95

Hi-Torque Hose Clamps

TURBO ACTUATOR ELECTRONICS, 2500/3500/ 4500/5500

‘07.5-‘12 , ACTUATOR & GEAR HOUSING

CM-ACT12C1: $770.00

‘13-‘21, ACTUATOR & GEAR HOUSING

CM-ACTKIT2013: $985.00

FREE SHIPPING!

Kit includes actuator, gear housing and wiring adapter. With the VGT everything changed. To work on it you need training, expensive tools and you couldn’t test the actuator so you were left with replacing the turbo which is expensive. City Diesel worked to fix this. Step one was to develop an actuator tester that anyone could use. Shortly after they released it, more affordable rebuilt turbochargers started showing up. However, there was still a problem because the actuator has to be calibrated to the turbocharger and you were not able to simply replace an actuator. This means you either have to pay a fee to get the actuator calibrated at a dealership (average price $200) or buy the entire turbocharger even if the actuator was the only problem. The cost-effective solution: the creation of a new actuator. It is what we call a half-shell: you replace all the electronics, including the circuit board and motor, and reusing the half of your actuator that only contains gears (the “gearbox ‘07.5-‘12”). There is no calibration required and no complicated installation. Again, what this means to you is that you have a viable, costeffective option for replacing your actuator when you have a problem.

WASTEGATE CONTROL VALVE

‘04.5-‘07, 5.9L BD-1045921: $192.95

Replacement part for the OEM electronically controlled wastegate.

‘99-‘02, Manual Transmission

‘99, Automatic Transmission

BD-1047151: $270.95

Will not work on HY35 turbo.

TURBO ADUSTABLE WASTEGATE ACTUATOR

‘94-‘98.5 BD-1047150: $270.95

Works with HX35 turbo only.

BD’s adjustable wastegate actuator keeps the bypass valve closed, raising boost levels for increased performance and helping to prevent wastegate “creep.” It includes a high temperature resistant Nomex diaphragm with a heavier spring and locking jam nut for precise boost pressure settings.

TURBO

DRAIN TUBES & COMPONENTS

Buy with confidence. Turbochargers have one year warranty.

TURBOCHARGERS

‘13-‘18, 2500/3500 6.7L VGT

Rebuilt Turbo with City Diesel Actuator Speed sensor not included.

CD5326054: $3750.00

Includes $1000.00 refundable core charge

‘04.5-‘07, 5.9L Wastegate solenoid not included.

CD4043600: $825.00

‘00-‘02, 5.9L Automatic Transmission

CD4036239: $815.00

‘96-‘98, 12V & 24V Automatic & Manual Trans

CD3539343: $763.00

‘91-‘93, 5.9L 250/350

CD3802349: $660.00

‘7.5-‘12, 2500/3500 6.7L VGT

Rebuilt Turbo with City Diesel Actuator Speed sensor not included.

CD3770973: $3050.00

Includes $1000.00 refundable core charge.

‘03-‘04, 5.9L (Will not work on ‘04.5 models with large hole in the compressor housing for sensor.)

CD4035044: $800.00

‘99-‘02, 5.9L ‘99, 2500/3500 All Transmissions ‘00-‘02, 2500/3500 Manual Trans

CD3592766: $763.00

‘94-‘95, 5.9L Automatic & Manual Trans

CD3539911: $763.00

‘89-‘90, 5.9L 250/350

CD3528771: $550.00

CUMMINS Turbo Oil Drain O-ring (‘94-‘07, 5.9L)

Fits nipple pressed into the engine block. 1 required per application.

CUMMINS Turbo Coolant Line Sealing Washer (‘07.5-‘22, 6.7L )

Gaskets and seals included

‘98.5-‘02, 24V DRM674602

‘13-‘18, 6.7L Cab/Chassis DRM674562

Direct Replacement Exhaust Manifolds

We found these Dorman exhaust manifolds that we can offer at a great price. The manifold kits even include six engine-to-manifold gaskets and a turbo gasket. The drawback? You might want to use a die grinder to clean up the rough casting around the ports.

‘13-‘18, 6.7L Cab/Chassis DRM674562: $479.95

‘07.5-‘12, 6.7L

‘03-‘07, 5.9L

‘98.5-‘02, 24V

‘89-‘98, 12V Works on trucks with or without EGR.

DRM674895: $499.95

DRM674910: $269.00

DRM674602: $233.95

DRM674527: $178.95

CUMMINS ‘98.5, 24V

V-BAND CLAMPS

$37.95

CAST IRON ELBOW-TO-TURBO

‘07.5-‘18, 6.7L 3905216: $45.95

TURBINE HOUSING-TO-COMPRESSOR

HE341/HE351 TURBO

‘03-‘07, 5.9L 3595658: $49.95

TURBINE HOUSING-TO-CAST IRON

ELBOW

‘03-‘07, 5.9L 3535399: $55.95

DOWNPIPE-TO-CAST IRON ELBOW

‘89-‘98, 12V 0 4428550: $31.95

V-BAND CLAMPS

DOWNPIPE-TO-CAST IRON ELBOW

‘07.5-‘18, 6.7L DRM904353: $53.95 (Gasket included.)

DOWNPIPE-TO-CAST IRON ELBOW

‘04.5-‘07, 5.9L DRM904354: $36.95

DOWNPIPE-TO-CAST IRON ELBOW

‘03-‘04, 5.9L DRM904253: $37.95

CUMMINS ‘89-‘98, 12V 3911349

CUMMINS & MOPAR Exhaust Manifolds

If you look into the engine compartment of your Dodge Cummins Turbo Diesel and find it dirty with soot, it is a good indication that the exhaust manifold is cracked. Replace it with an OEM manifold.

MOPAR ‘13-‘18, 6.7L Cab/Chassis 68205983AA: $640.00

CUMMINS ‘07.5-‘12, 6.7L Cab/ Chassis

MOPAR ‘03-‘07, 5.9L

$574.95

$395.00

CUMMINS ‘99-‘02, 24V 5254373: $382.95

CUMMINS ‘98.5, 24V 3937187: $750.00

CUMMINS ‘89-‘98, 12V 3911349: $745.00

Exhaust Manifold Stud Kits

‘89-‘98, 12V with aftermarket ATS or BD manifold

STUDKIT8905: $58.00

‘98.5-‘07, 24V with stock or aftermarket manifold

STUDKIT8905_A: $58.00

Save yourself the frustration of trying to line the gaskets up with the manifold and cylinder head using the OEM bolts. Install this stud kit, hang your exhaust manifold gaskets on the studs and then install the manifold. Kit comes with studs and nuts required for a complete installation.

NOTE: Kits do not have studs for the turbo-to-manifold connections. Does not work on ‘89-‘98, 12-valve engines when the stock manifold is reused because the studs are too short.

TORCTITE STAINLESS STEEL EXHAUST PIPE CLAMP PREFORMED LAP JOINT CLAMPS

3.5” HD20S350: $7.25 4” HD20S400: $9.75

5” HD20S500: $10.15

HEAVY-DUTY EXHAUST PIPE CLAMP

See our stainless steel Custom exhaust tips at our website.

‘07.5-‘12, 6.7L 3500/4500/5500

‘03-‘07, 5.9L (2-Piece Manifold ) BD-1045987-KIT

Pulse Exhaust Manifolds

BD’s Pulse exhaust manifolds are cast from high-silicon ductile iron which can withstand extremely high temperatures, as well as the additional weight created by bigger single or twin turbo systems. Expansion joints allow the manifold to expand and contract.

‘07.5-‘18, 6.7L 2500/3500 (2-Piece Manifold )

‘13-‘18, 6.7L 3500/4500/5500

‘07.5-‘12, 6.7L 3500/4500/5500

‘03-‘07, 5.9L (2-Piece Manifold ) Gaskets included.

‘98.5-‘02, 24V (3-Piece Manifold ) Gaskets included.

‘89-‘98, 12V (3-Piece Manifold ) Gaskets included.

Exhaust Manifold Gasket Sets

‘07.5-‘18, 6.7L BD-1045992: $84.95 ‘13-‘18, 6.7L Chassis/Cab Only BD-1045994: $107.95

TURBO MOUNTING KIT

‘07.5-up, 6.7L (2-Piece Manifold ) BD-1045983: $33.95

This turbo mounting kit has all the necessary hardware for your turbo reinstall to help prevent leaks and to replace any older studs that might be prone to future breakage. Kits includes gaskets, studs and miscellaneous hardware to install HE351 and HE300VG mounted turbos.

Chassis/Cab Only. (2-Piece Manifold ) BD-1045967:

‘Finger Touch’ Oil Drain Valve

Now drain your engine oil with the touch of a finger. No more stripped threads, fractured drain plugs, or leaky gaskets.

18MM DRAIN VALVE

‘02-‘23, 5.9L & 6.7L FTV-104A: $21.95

‘89-‘93, 12V FTV-104: $21.95

18MM REMOVABLE 3/8” HOSE NIPPLE - OPTIONAL

‘02-‘23, 5.9L & 6.7L

‘89-‘93, 12V FTV-H001: $5.00

22MM DRAIN VALVE

‘94-‘01 FTV-7B: $24.95

22MM REMOVABLE 5/8” HOSE NIPPLE - OPTIONAL

‘94-‘01 FTV-H 002: $6.00

14MM DRAIN VALVE

‘14-‘22, Ram EcoDiesel FTV-106: $21.95

14MM REMOVABLE 3/8” HOSE NIPPLE**

‘14-‘19, Ram EcoDiesel FTV-H 001E: $5.00

* The removable hose nipple is a convenience item.

Attach a hose and let it drain to a remote location.

** Will not work on ‘20-’22, 1500 EcoDiesel.

OIL DRAIN VALVE METAL COVER

FTV-104, FTV-104A & FTV-106 FTV-DC-001: $2.00

FTV-7B FTV-DC-002: $2.25

Oil Pan (‘03-’18)

‘13-‘18 DRM264860: $439.95

‘03-‘12 DRM264470: $229.95

This replacement oil pan is a low cost replacement for your Ram truck that fits like OEM. Includes drain plug.

• Stamped steel construction ensures long lasting durability

• High strength coating prevents rust

• Manufactured to strict engineering quality standards

Billet Aluminum Transmission Oil

Dipstick Handle, ‘03-‘23, 5.9L & 6.7L

LT-TRANS-DS: $19.95

Dress up the engine compartment with this red anodized transmission oil dipstick handle.

NOTE: Does not fit Aisin transmissions.

Billet Aluminum Engine Oil

Dipstick Handle, ‘07.5-‘23, 6.7l

LT-DIPSTICK: $19.95

Dress up the engine compartment with this blue anodized oil dipstick handle.

Ram Cummins 2500/3500

FEMCO Drain Valve & Tube

‘02-‘23, 5.9L/6.7L EZ-DP-18MMPLA-DG: $36.95

‘94-‘01 EZ-DP-22MMPL-DG: $36.95

‘89-‘93 EZ-DP-18MMPL-DG: $36.95

‘89-‘23 EZ Drain Valve Tube EZ-TUBE-DG: $17.95

NOTE: Drain valve will not work without the tube. Installation requires 30mm socket or wrench. NOTE: Tube sold separately.

Ram 1500 EcoDiesel, ‘14-‘22 FEMCO Drain Valve & Tube

‘14-‘22, 14-1.5mm Drain Valve

EZ-DP-15-14150-01: $36.95

‘14-‘19, EZ Drain Valve Tube (Small)

EZ-TUBE-CD-2001: $11.95

‘20-‘22, EZ Drain Valve Tube (Short 90°)

EZ-TUBE-ED90: $18.95

NOTE: Drain valve will not work without the tube. Installation requires 23mm socket or wrench.

‘20-‘22,

NOTE: Tube sold separately.

Permanently replaces the drain plug.

Patented drain tube screws into the oil plug.

• Drain the oil, remove the drain tube – thus resealing the drain valve –reinstall the O-ring sealed drain cap, and you’re finished.

90°

‘14-‘19

These radiators are made to OEM specs or better.

RADIATORS (‘89-’09)

‘03-‘09, 5.9L & 6.7L 2500/3500 GPD-2711C: $249.95

Plastic tanks, aluminum core, crossflow

‘94-‘02, 5.9L 2500/3500 GPD-1553C: $269.95

Plastic tanks, aluminum core, crossflow

‘91.5-‘93, 5.9L 2500/3500 GPD-1198C: Call to check pricing and availability. Intercooled, with side tanks

‘89-‘91, 5.9L 2500/3500 GPD-1079C: Call to check pricing and availability. Non intercooled, with top tanks

Due to oversize shipping, additional shipping charges will apply. Replace a clogged or leaking radiator in your Ram Turbo Diesel truck with an OEM-style quality replacement. Direct fit so you’re not having to try to make a generic size radiator fit.

‘13-‘18, 6.7L 2500/3500/4500/5500

DRM621592: $109.95 Plastic

‘10-‘12, 6.7L 2500/3500/4500/5500

DRM620058: $137.95 Plastic

‘08-‘10, 6.7L 3500/4500/5500 Chassis Cab

5.9L & 6.7L 2500/3500

DRM620065: $119.95 Plastic

‘90-‘02, 5.9L

DRM620066: $119.95 Steel

Replace your damaged cooling fan blade with this direct fit replacement. It is is engineered for a perfect fit and is made from quality materials to ensure durability and restore proper cooling system operation.

AFTERMARKET COOLING FAN & EXTENSION ADAPTER (‘94-’02)

FAN-9402: $326.95

Mopar has discontinued its cooling fans for the ‘89-‘02 Turbo Diesel trucks. Those looking for a replacement end up paying a hefty sum for a used one.

This fan is similar to the metal hub with plastic blades fans used in the 2003 and newer Ram trucks. This fan has nine blades instead of seven like the original. The original fan was 22” in diameter and this new model is 20” which flows 39% more compared to the OEM fan.

The fan blades are thicker than the original and come back closer to the engine. Therefore, the fan will not work with trucks with aftermarket harmonic dampers and other accessories protruding from the front of the engine without the use of the included spacer. Made in the U.S.A. and comes with a one-year manufacturer warranty.

MOPAR Water Pump (‘19-‘23, 6.7L) Includes replacement water pump O-ring.

CUMMINS Water Pump (‘13-‘18, 6.7L) *Post-recall design Includes replacement water pump O-ring.

CUMMINS Water Pump (‘89-‘12) Includes replacement water pump O-ring.

GATES Water Pump (‘13-‘18, 6.7L) Includes replacement water pump O-ring.

GATES Water Pump (‘07.5-‘12, 6.7L) Includes replacement water pump O-ring.

GATES-42291 $79.95

GATES Water Pump (‘98.5-‘07, 5.9L 24V) Includes replacement water pump O-ring.

GATES Water Pump (‘89-‘98, 12V) Includes replacement water pump O-ring.

MOPAR Water Pump to Engine Seal (‘89-‘23, 5.9L

RADIATOR HOSES & HEATER HOSES

GATES - Upper Radiator Hose (‘94-‘98, 5.9L, 12V)

GATES - Upper Radiator Hose (‘91.5-‘93) Intercooled

GATES - Upper Radiator Hose (‘89-‘91) Non-Intercooled

MOPAR - Lower Radiator Hose (‘19-‘23, 6.7L 3500/4500/5500, with Aisin Transmission)

MOPAR - Lower Outlet Hose (‘19-‘23, 6.7L 2500/3500, with 68RFE Transmission)

MOPAR - Lower Outlet Hose (‘15-‘18, 6.7L) Straight with molded plastic nipple.

MOPAR - Lower Outlet Hose (‘13-‘18, 6.7L) 90° elbow and includes clamps.

MOPAR -

DORMAN

w/Plastic “Y” (‘13-‘14, 6.7L, 2500/3500/4500/5500) Clamps included.

w/Aluminum “Y” (‘13-‘14, 6.7L, 2500/3500/4500/5500) Clamps included.

GATES-22645: $22.95

GATES-22081: $22.95

GATES-21930: $18.95

GATES-20957: $12.95

$37.95

$32.95

$21.95

GATES - 5/8” Molded Heater Hose - Heater Inlet (‘11-‘18, 6.7L) Cut to fit application.

GATES - 5/8” Molded Heater Hose - Heater Outlet (‘07.5-‘10, 6.7L) Cut to fit application.

GATES - 5/8” Molded Heater Hose - Heater Inlet (‘07.5-‘10, 6.7L) Cut to fit application.

GATES - 5/8” Molded Heater Hose - Heater to Pipe 1 (‘03-‘07, 5.9L) Cut to fit application.

GATES - 5/8” Molded Heater Hose - Heater to Pipe 2 (‘03-‘07, 5.9L) Cut to fit application.

GATES - 5/8” x 16” Molded 90° Heater Hose (‘98.5-‘02, 24V) Cut to fit application.

GATES - 9/32” Molded Coolant Bypass Heater Hose (‘94-‘98, 12V) Cut to fit application.

GATES - 5/8” Molded 90° Coolant Hose (‘89-‘98, 12V & ‘98.5-‘02, 24V) Cut to fit application.

MOPAR - 3.25” Upper Cabin Heater Hose (‘06-‘07, 5.9L) Find clamps on page 24.

MOPAR - 2.5” Lower Cabin Heater Hose (‘03-‘07, 5.9L) Find clamps on page 24.

CUMMINS - 3” Silicone Upper Cabin Heater Hose (‘03-‘05) Find clamps on page 24.

GATES - 5/8” Straight Standard Heater Hose (‘98.5-‘02, 24V & ‘89-‘98, 12V) Cut to fit application.

GATES - 5/8” Straight Silicone Heater Hose (‘89-‘94, 12V) Cut to fit application.

DORMAN - Heater Core Tube (‘03-‘05, 2500/3500, diesel only, manual transmission only)

$21.95

$10.95

GATES-18774: $12.95

GATES-19168: $14.95

GATES-19213: $8.95

GATES-28467: $11.95

GATES-18124: $12.95

GATES-20338: $7.95

05179114AB: $30.50

05086822AB: $20.95

3820663: $25.50

GATES-28411: $1.95/ft.

GATES-26241: $8.95/ft.

DRM626321: $95.95

NO START TIP (‘94-‘98 12-valve engines)

Should the fuel START/RUN solenoid fail to energize (come up) and/or hold in the “UP” position, do not let its malfunction leave you stranded. Have an assistant attempt to start your truck while you move the solenoid’s plunger up to the “RUN” position. If it starts and the solenoid holds in the “RUN” position, drive it to your destination for further troubleshooting as time permits. If the solenoid fails to hold in the “RUN” position, tie-wrap it in the “RUN” position, and drive it to your destination. Cut the wrap, and the engine will stop.

So, we presented a tip to get you to a desired location. Does the problem lie with the solenoid, the relay to the solenoid, the fuseable link that feeds the solenoid or a fuse?

Do a voltage check at the solenoid’s three-wire connector. Negative goes to the Black/Red trace wire. On “START”, positive 12-volts will be at the Red/Black trace wire.

If voltage is present for “START” the solenoid is likely the problem.

No voltage for “START”? Chances are that the solenoid is okay. Check the relay, fuseable link or fuse #9 as the source of the electrical malfunction.

No voltage for “START” tells you to check the relay to the solenoid (Item 1).

ENGINE ACCESSORY REBUILD KITS

AFTERMARKET Fuel Solenoid Saver Diode (‘94-‘98)

Save the fuel solenoid from burning up if the starter sticks on.

AFTERMARKET 65 amp Fusible Link (‘94-‘98)

Protection for the power supply to the fuel shutoff solenoid.

Fuel Shutoff Solenoid, Bracket & Relay (‘94-‘98) T he P7100 pump on the ‘94-‘98 Dodge/Cummins 12-valve engine utilizes a 12-volt electric solenoid that, over time, may stop functioning. Get a replacement solenoid to keep on hand in case your truck runs into trouble. SPECIAL: Mounting Bracket and Fuel Shutoff Relay included with this solenoid kit.

Fuel Solenoid Replacement Boot (‘94-‘98) Replace a torn boot on the fuel shutoff solenoid and help prevent damage to it.

AFTERMARKET Fuel Shutoff Relay (‘94-‘98)

This 70 amp relay activates the fuel solenoid.

Battery Side

BOSCH Kit

Also check the fuseable link that feeds the solenoid (Item 2) or fuse #9 in the fuse panel.

SS99: $25.95

FL90: $16.95

SA-4981-12: $99.95

SA-4153: $11.95

SS70A: $13.95

PLUNGER & CONTACTS

Starter Solenoid Rebuild Kit (‘89-‘06) Designed to carry twice the amperage load for easier starting and longer life. The SuperSize Contacts fit perfectly and are a replacement for the common problem of sticking and clicking stock starter contacts in ‘89-‘06 starters.

Starter Stud Repair Kit (‘89-‘02) Occasionally a loose battery cable at the starter can cause arcing/corrosion and the starter stud may be damaged causing difficult removal. Replace the starter stud with this kit if it is damaged. Kits include copper stud with knurl for battery cable connection, washer, nut, O-ring and all insulators.

GD-G11S: $19.95

PLUNGER • CONTACTS • INSTALL DVD

GD-G11SKIT: $29.99

BATTERY SIDE STUD KIT

GD-2791: $19. 95

MOTOR SIDE STUD KIT

GD-3160: $19. 95

BOSCH ALTERNATOR

REBUILD KIT (‘08-‘10, 6.7L )

GD-ARK-01308: $39.99

BOSCH ALTERNATOR

Alternator Rebuild Kits The most common problem with an alternator is that the brushes wear out. Without brush-to-armature contact there is no electrical charge. Some truck owners replace alternators. Budget conscious owners rebuild the alternator with new brushes and bearings prior to complete failure.

Rebuild kit for ‘08-‘10 trucks fits Bosch alternators only.

DENSO Kit

Vacuum Pump Reseal Kit (‘91.5-‘02) This kit repairs the engine oil leak where the power steering pump joins the vacuum pump. This is a common leak since the seal inside the vacuum pump ages with time. Why buy a new vacuum pump when you can rebuild it?

Rebuild kits come with DVD instructions, written instructions, a modified seal, extra O-rings, and a Cummins gasket to reinstall the pump to the engine.

Vacuum Pump Seal Kit (‘91.5-‘02) This kit includes only the vacuum pump seals and is designed for those experienced in vacuum pump repair. Extra O-rings and a dual lip seal are included in the kit.

Vacuum Pump Seal Retainer Kit (‘96-‘02)

2 piece vacuum pump.

Vacuum Pump/Power Steering Pump Couple Gear & Disc (‘91.5-‘02)

This rebuild kit will fit Wabco vacuum pumps only. It will not work on aftermarket vacuum pumps. Installation DVD included.

Replacement Vacuum Pump Fiber Vane Set (‘91.5-‘02)

REBUILD KIT (‘03-‘07, 5.9L)

GD-ARK-0307: $34.99

BOSCH ALTERNATOR

REBUILD KIT (‘98-‘02)

GD-ARK-B: $34.99

DENSO ALTERNATOR

REBUILD KIT (‘89-‘02)

GD-ARK-DENSO: $34.99

REBUILD KIT (‘96-‘02)

GD-VPRK-9602: $59.99

REBUILD KIT (‘91.5-‘95)

GD-VPRK-9195: $59.99

GD-GG03XP-VPSK: $31.99

GD-GG2022: $61.00

GD-GG915-2002: $61.00

GD-10FV: $24.00

H TDR78, p92-93

1989-1993 FIRST GENERATION

1994-2002 SECOND GENERATION

AFTERMARKET Throttle Position Sensor (‘98.5-‘04, 24V) T his TPS fits trucks equipped with either a manual or automatic transmission. Once installed, calibration is required.

( Instructions included )

H TDBG Vintage, ‘94-‘04 Lock/Unlock

CUMMINS Throttle Position Sensor (‘94-‘98, 12V)

H TDR 83, p92-93: How to Calibrate

TPS/APPS Delete (‘91.5-‘98, 12V)

MOPAR Bellcrank Throttle Bushings (‘89-‘98, 12V) 2 required per vehicle.

BD APPS Noise Isolator (‘94-‘04, 5.9L)

Interference in the throttle position sensor circuits (APPS) on Dodge Cummins engines from ‘94 to ‘04 will create false voltage readings in the APPS/TPS circuit and cause the lock-up torque converter to rapidly cycle on and off as you drive. This part removes the RF interference.

1994-2002 SECOND GENERATION

1994-2002 SECOND GENERATION

2003-2009 THIRD GENERATION

MOPAR Accelerator Pedal Throttle Position Sensor ( TPS) with Pedal (‘09-‘23)

Multiple TPS versions for these years. Check which TPS you have in your truck before purchase of new part.

TPS68043161AD $149.95

DORMAN Windshield Washer Reservoir Cap

DORMAN Power Steering Reservoir Cap (‘89-‘02)

DORMAN Brake Master Cylinder Cap (‘98-UP w/threaded cap, 2500/3500)

Hood Pad Retaining Clip Kit (‘94-‘02)

This kit has all 15 clips required to replace the broken clips and put the hood pad back where it belongs.

DORMAN Universal Underhood Insulation Pad Retainers Sold as a pair.

DRM82577 $10.95

DRM42053 $11.95

GG-HOODCL $9.95

DRM963571 $4.95

MOPAR Accelerator Pedal Throttle Position Sensor (TPS) with Pedal (‘09-‘23)

Multiple TPS versions for these years. Check which TPS you have in your truck before purchase of new part.

TPS53034160AE $193.95

MOPAR Accelerator Pedal Position Sensor (TPS) with non-Adjustable Pedal (‘07-‘08)

Multiple TPS versions for these years. Check which TPS you have in your truck before purchase of new part.

MOPAR Accelerator Pedal Position Sensor (TPS) with Adjustable Pedal (‘07-‘08)

Multiple TPS versions for these years. Check which TPS you have in your truck before purchase of new part.

MOPAR Accelerator Pedal Position Sensor (TPS) with Pedal (‘05-‘06)

TPS53032794AB $169.95

DORMAN Throttle Pedal and Shift Linkage Bushing Kit (‘03-‘09) Assorted bushings.

AFTERMARKET Throttle Position Sensor (‘98.5-‘04, 24V) This TPS fits trucks equipped with either a manual or automatic transmission. Once installed, calibration is required. ( Instructions included )

NOTE: Only works on trucks equipped with APPS installed on bellcrank assembly, not under the driver’s side battery.

BD APPS Noise Isolator (‘94-‘04, 5.9L) Remove the interference in the throttle position sensor circuits (APPS) on Dodge Cummins engines from ‘94 to ‘04 that will create false voltage readings in the APPS/ TPS circuit and cause the lock-up torque converter to rapidly cycle on and off as you drive.

MOPAR TPS Repair Connector Kit - Manual Transmission (‘03-‘04, 5.9L 2500/3500)

DRM14041 $6.95

TPS98502 $199.95

H TDBG, Vintage ‘94-‘04 Lock/Unlock

BD-1300030 $33.95

68032364AA $59.95

2003-2009 THIRD GENERATION

CUMMINS Crankcase Vent Filter (‘07.5-‘23)

Replaces the filter on top of the valve cover assembly. The suggested change interval is 67,500 miles.

Find gasket #3999820 for install on page 6. You may receive a CV52001 or CV54003. CV54003 is the OEM CCV filter for Mopar.

MOPAR Crankcase Vent Filter (‘07.5-‘23) Replaces the filter on top of the valve cover assembly. The suggested change interval is 67,500 miles.

Find gasket #3999820 for install on page 6.

2003-2009 THIRD GENERATION

Engine Mount Aftermarket Water-in-Fuel Sensor Repair Connector (‘07.5-‘22, 6.7L) Also works with ‘98.5 to ‘02 fuel lift pump. Works with 3911940-S.

MOPAR Intake Crank/Cam Sensor Connector Repair Kit (‘03-‘18, 5.9L & 6.7L) Connector repair harness kit for the crank/cam position sensor #5594275 in ‘03-’18 5.9L & 6.7L trucks.

CUMMINS Diesel MAP Sensor and Intake Air Temperature Repair Connector (‘07.5-‘18, 6.7L) For Sensors 2897333NX, 2897332NX, PAI-050624, & PAI-050634.

2003-2009 THIRD GENERATION

Tensioner Assembly (‘03-‘23, 5.9L & 6.7L)

CUMMINS 3947574

GATES Accessory Drive Belt Kit (‘03-‘12, 5.9L & 6.7L) Kit includes heavy-duty replacement serpentine belt, belt tensioner/idler pulley assembly.

MOPAR Fan Clutch Connector Repair Kit (‘03-‘10, 6.7L 2500/3500) Main harness side.

CUMMINS Bell Housing Adapter Seal (‘03-‘22)

2010-2023 FOURTH GENERATION

CUMMINS Crankcase Vent Filter (‘07.5-‘23)

Replaces the filter on top of the valve cover assembly. The suggested change interval is 67,500 miles.

Find gasket #3999820 for install on page 6. You may receive a CV52001 or CV54003. CV54003 is the OEM CCV filter for Mopar.

MOPAR Crankcase Vent Filter (‘07.5-‘23)

Replaces the filter on top of the valve cover assembly. The suggested change interval is 67,500 miles. Find gasket #3999820 for install on page 6.

on top of valve cover behind CV filter.

in your truck before purchase of new part.

MOPAR Accelerator Pedal Throttle Position Sensor ( TPS) with Pedal (‘09-‘23)

Multiple TPS versions for these years. Check which TPS you have in your truck before purchase of new part.

MOPAR Accelerator Pedal Throttle Position Sensor (TPS) with Pedal (‘09-‘23)

Multiple TPS versions for these years. Check which TPS you have in your truck before purchase of new part.

TPS53034160AE $193.95

CUMMINS Mass Flow Sensor (‘07.5-‘18, 6.7L) Mounted on air filter housing. 4984760 $185.50

MOPAR MAF Sensor Repair Connector (‘07.5-‘18, 6.7L) Repair connector for Sensor #4984760.

2010-2023 FOURTH GENERATION

2010-2023 FOURTH GENERATION

FRONT DIFFERENTIAL COVERS

‘13-‘23, 3500 & ‘14-‘22, 2500

AAM 12-9.25” 12 Bolt (+.50qt.)

PML11136: $255.00

‘03-‘12, 3500 & ‘03-‘13, 2500

AAM 14-9.25” Low Profile 14 Bolt (+.50qt.)

PML11118: $255.00

REAR DIFFERENTIAL COVERS

‘19-‘23, 2500/3500

AAM 11.5”, 11.8”, & 12” 14 Bolt (+.60qt.)

PML11176: $255.00

‘14-‘18, 2500

AAM 11.5” 14 Bolt (+.50qt.)

PML11147: $255.00

‘03-‘13, 2500 & ‘03-‘18, 3500

AAM 11.5” 14 Bolt (+.75qt.)

PML10361: $255.00

‘03, 2500

AAM 10.5” 14 Bolt (+.80qt.)

PML10302: $255.00

Front DiffERENTIAL Covers

9.25” DIFF COVER

(‘14 -‘23, 2500 & 13 -‘22, 3500

MH-AA12-925: $352.00

Increases capacity from 2.5 quarts to 4.5 quarts.

9.25” DIFF COVER

(‘03-‘12, 3500 & ‘03-‘13, 2500

Increases capacity from 2.5 quarts to 4.5 quarts.

NOTE: Effective July 2012, Mag-Hytec redesigned the cover to alleviate interference with the track bar and steering damper. However, it is possible that modifications will have to be made to the U-bolt bracket or to the cover itself for clearance issues. It is important to pay very close attention to detail during installation. Once the cover has been installed or modified to work it cannot be returned.

Dana 60 (‘89-‘02) MH-DA60: $341.00

Increases capacity from 3.5 to 4.5 quarts.

Dana 60 w/Vented Cover (‘02) MH-DA60-VENT: $341.00

(Only Fits ‘02 Trucks with Vented Cover)

CAUTION: Installation of front cover is just a bit more involved than for Mag-Hytec rear differential covers. You need to pop the driver’s side tie-rod end loose from the steering knuckle to give clearance between the ring gear and the steering rod.

Mag-Hytec front diff covers increase the fluid capacity over the stock cover. They are a perfect match in appearance and function to the rear diff covers. Perhaps the most important feature for off-road use of your four wheel drive Dodge Ram is the angled ramp on the bottom half of the cover instead of a flat mounting flange. The purpose for this ramp is that if you hit a rock or other obstruction on the trail, the differential will tend to ride up and over it instead of smashing the cover into the gears.

1/8 NPT temperature sending unit fitting Lubricant reference plug

Rear Differential Covers

‘19-‘23, 3500 DRW / 11.5” and 12” American Axle (8 qt.)

MH-AA14-12: $385.00

‘19-‘23, 2500 / 11.5” and 12” American Axle (7 qt.)

For trucks with coil springs.

MH-AA14-12-CS: $385.00

‘14-‘18, 2500 / 11.5” American Axle (8 qt.)

For trucks with coil springs.

MH-AA11-5CS: $352.00

‘13-‘18, 3500 without rear sway bar

‘13, 2500 / 11.5” American Axle (8 qt.)

‘03-‘12, 2500/3500

MH-AA11-5: $352.00

‘03, 10.5 American Axle (6 qt.) MH-AA10-5: $352.00

NOTE: DANA 80/2WD APPLICATIONS

When ordering, please let us know if you have a two-wheel drive truck with a Dana 80 and a factory-installed sway bar or Hellwig sway bar so that a sway bar relocation kit can be included with your rear differential cover.

NOTE: PML differential covers are designed to work with the OEM reusable gasket. Depending upon the number of times you have already changed the fluid, it may require the purchase of a new differential cover gasket.

‘94-‘02 Dana 80 10 Bolt (+.80qt.)

PML9520: $255.00

‘94-‘02 & ‘89-‘93 2500/3500

Dana 70 10 Bolt (+.80qt.)

PML9426: $255.00

The PML differential covers feature a low profile for clearance and oil fill/level check and drain holes to make it easy to follow the 15K oil change interval. Extra capacity, fins, and aluminum construction aid in heat dissipation to keep fluid cool.

‘ 94-‘02 Dana 80 (8 qt.) MH-DA80: $319.00

‘94-‘02 Dana 70 (6 qt.)

‘89-‘93, 2500/3500

MH-DA70: $314.00

Universal Replacement Drain Plug

MH-DRPLUG: $15.00

If the original drain plug that came with the Mag-Hytec pan or cover gets damaged, we carry this universal replacement. Includes Allen tool.

DIFFERENTIAL COVER AND TRANSMISSION GASKETS

RAM 1500 ECODIESEL TRANS FILTER & GASKET, ‘14-’23

DRM265850F: $69.95

Replacement filter and gasket only. Only works with Dorman trans pan, DRM265850.

RAM 1500 ECODIESEL TRANS PAN, FILTER, PLUG & GASKET KIT, ‘14-’23

DRM265850: $189.95

This kit allows you to replace the filter only unlike the OEM pan.

4WD TRANSFER CASE SUPPORT BRACKET KIT (‘03-’07)

TC48REAC: $126.95

4WD transfer case housings on trucks with 48RE transmissions often crack and this is typically due to the lack of support of the heavy transfer case. This kit has been designed to solve this problem and is easy to install.

A specially designed steel bracket installs in place of the lower two bolts (longer bolts supplied), and includes the common universal mount.

NOTE: Must have factory skid plate installed to work.

‘13-‘22, Ram 3500, ‘14-‘22, Ram 2500 ‘94-‘01, Ram 2500/3500 ‘19-‘22, Ram 4500/5500 BD-1030703: $173.95

‘09-‘22, Ram 1500 BD-1030705: $173.95

This BD kit is designed to allow the truck owner to manually disable the front wheel drive mechanism by holding the hubs free (2WD) mode with the transfer case in 4WD-Low range. With this kit installed, the front wheels will NOT be driven through the transfer case.

Transmission Valve Body Electronics Upgrade Kit (‘00-‘07, 5.9L)

BD-1060605: $252.95

A leading cause of faults with the 47RE/48RE transmission is the failed plastic governor pressure transducer. The BD kit replaces this with a durable metal unit, includes an electronic adapter to prevent over pressure codes and has a built-in temperature sensor for reliability.

Transmission COOLER BYPASS DELETE

‘19-‘22, 68RFE & AS69RC BD-1061527: $102.95

‘13-‘18, 68RFE & AS69RC BD-1061528: $102.95

Debris in the stock cooler bypass valve can cause it to jam the internal valve keeping it in recirculation mode. When this happens the transmission temperature will rise and can lead to overheating and premature transmission failure. The BD Cooler Bypass Delete keeps the transmission cooler operational all the time and eliminates this failure prone item.

2-Low Transfer Case Kit

Deep TranSMISSION Pan (‘89-‘07)

‘98-‘07 MH-727-9803: $314.00

‘89-‘97 MH-727-9497: $314.00

NOTE: Also fits ‘03-‘07 HD 48RE transmission.

Use the Mag-Hytec Deep Pan to add capacity to your stock 727, 518, 47RE or 48RE automatic transmission. The pan for years ‘94-‘97 will increase the lube capacity by 1.5 quarts. The pan will not increase the capacity of the ‘98 and up model 47RE transmissions as Dodge enlarged the factory pan.

We include a transmission filter with your purchase.

Increased fluid and cooling capacity

Magnetic drain plug

The Mag-Hytec Deep Pan has a magnetic drain plug, pre-drilled 1/8 NPT fitting for a temperature sensor, transmission gasket, and mounting hardware

I

‘Double Deep’ Transmission Pan (‘89-‘07, 5.9L)

‘ 98-‘07 MH-727DD-9803: $352.00 ‘89-‘97 MH-727DD-9497: $352.00 Fits the stock 727, 518, 47RE or 48RE automatic transmission.

The “Double Deep” pan has all the same features as the Deep Pan; magnetic drain plug, pre-drilled 1/8 NPT fitting for a temperature sensor, transmission gasket, and mounting hardware.

In addition, with the “Double Deep” pan, the inside depth of the pan is increased from 3” to 5-1/4”, which adds another four quarts of fluid capacity to the system. The pan is still tucked 1/2” above the truck’s center frame cross-member. The kit includes spacer hardware to relocate the transmission filter deep into the sump.

68RFE TranSMISSION Pan (‘07.5-‘23, 6.7L)

MH-68RFE-A: $369.00

Mag-Hytec’s high-capacity deep sump for the 68RFE transmission provides for an additional 3 qts. of fluid for maximum cooling from its finned aircraft aluminum construction.

A 1/8 NPT temperature sender port lets you add a temperature gauge to keep tabs on fluid temperatures during heavy-duty use or long tows. When it is time for a fluid change, a magnetic drain plug makes draining the fluid easy and lets you see if there are any contamininants in the fluid.

Freddie Frugal includes a replacement sump filter and gasket with the purchase of the 68RFE pan. The customer is responsible for the Mopar 5179267 spin-on filter (page 5)

transmission pans

STANDARD TRANSMISSION PANS

‘13-‘23, 6.7L 3500/4500/5500

Aisin AS69RC (+3qt to 4qt. w/4WD & 2WD)

PML11142: $440.00

‘07.5-‘23, 6.7L - 68RFE (+2.5qt. w/4WD; +3qt. w/2WD)

( Will not work in trucks with Aisin transmission.)

PML10304: $380.00

‘07.5-‘12, 6.7L C/C only.

Aisin AS68RC (3qt to 4qt.)

PML11139: $440.00

‘89-‘07, 5.9L - 47RE or 48RE ) (up to 2qt.)

PML9393: $315.00

EXTRA-DEEP TRANSMISSION PAN

‘07.5-‘23, 6.7L 2500/3500 68RFE ( Adds 4 to 4.5 additional quarts)

PML11161: $380.00

NOTE: PML pans are designed to work with the OEM reusable gasket. Depending upon the number of times you have already changed the fluid, it may require the purchase of a new trans pan gasket. ‘07.5-‘18 trucks with 68RFE did not come with an OEM pan gasket, but use RTV sealant. The cast aluminum PML pans feature a magnetic drain plug and 1/4” fins for cooling. The pans have a 1/8 NPT transmission temp port.

TRANS-COOL

DUAL COOLERS KIT

‘05-‘18, G56

TRANSCOOL_2: $239.95

‘94-‘05, NV4500/NV5600

TRANSCOOL_3: $239.95

‘89-‘93, Getrag 360

TRANSCOOL_1: $239.95

SINGLE COOLER KIT

‘05-‘18, G56

TRANSCOOL_SGL_2: $126.95

‘94-‘05, NV4500/NV5600

TRANSCOOL_SGL_3: $126.95

‘89-‘93, Getrag 360

TRANSCOOL_SGL_1: $126.95

The TRANS-COOL is designed to transmit heat from the inner surfaces to the air-cooled outer fins which helps dissipate heat from the transmission. Each individual cooler adds an additional half a quart of trans fluid to the gearbox.

Depending on the TRANS-COOL kit, it includes: aluminum cooler(s); PTO gasket(s); twelve or six PTO bolts and washers; and 1/8 NPT temperature gauge ports with plugs.

of 4 inches of clearance from the base of the PTO mounting surface

Cast of 356T6 Aluminum and black powercoated

Cast of 356T6 Aluminum and black powercoated

We include a transmission filter with your purchase of a pan.

SOUTH BEND CLUTCH

Heavy-Duty Hydraulic Clutch Slave and Master Cylinder Assembly No bleeding of master cylinder required.

*NOTE: ‘03-‘18 #HYD-X-750 not for use with G56 transmission with OEM dual mass flywheel.

DORMAN Automatic Transmission Pressure Transducer (‘11-‘22)

Trucks with 68RFE transmission.

DORMAN Automatic Transmission Pressure Transducer (‘00-‘07) Trucks with the 47RE and 48RE transmissions.

DORMAN Automatic Transmission Output Speed Sensor (‘94-‘07)

Speed Sensor with Pinion & Pigtail

3 Wire (‘93-‘97)

MOPAR Front Axle Locker (‘13-‘18, 4x4) ‘13-‘18 Ram 3500

DORMAN

*(‘03-‘18) Adj. HYD-X-750: $362.54 (‘98-‘02) Adj. HYD-X-150: $ 362.54 (‘94-‘97 ) Non-Adj. HYD-X-HD: $ 362.54

DRM601215 $64.95

DRM601016 $69.95

DRM917602 $19.95

GG-5013660AA $36.95

MOPAR Transfer Case Shift Indicator Switch (‘03, ‘05-‘20, 2500/3500/4500/5500)

For trucks with 271 Series transfer case.

** Please compare to stock sensor before ordering. Requires a 1-1/2” socket or wrench for removal. **

DORMAN Transfer Case Indicator Mode Switch (‘03, ‘05-‘20, 2500/3500/4500/5500)

For trucks with 271 Series transfer case.

**Please compare to stock sensor before ordering. Requires a 1-1/2” socket or wrench for removal. **

MOPAR

** Please compare to stock sensor before ordering. Requires a 7/8” socket or wrench for removal. **

5083138AA $79.95

DORMAN

Ram 1500/2500/3500 trucks with NVG271 transfer case and 16.5” long shift rod.

Dodge Replacement

Fuel Lift Pump (‘98.5-‘04.5)

‘98.5-‘02 FASS_DRP_02: $306.85

‘03-‘04.5 FASS_DRP_04: $369.55

Includes: (6) banjo gaskets to make install easier.

NOTE: The DRP is designed as a stock replacement pump. It will not meet the needs of hi-performance (over 300hp) applications.

The Dodge Replacement Pump (DRP) gives you the dependability of a FASS product without the cost of a complete system. An additional benefit is that fuel flow is increased by 33%.

We’re excited to sell the FASS DRP product. Its availability allows us to offer several fuel transfer pump options to our customers.

The DRP provides 80gph of fuel. The DRP-02 mounts in the stock location on the side of the engine. The DRP-04 relocates the pump to the side of the truck’s frame below the fuel cannister. The DRP kits come complete with all of the neccessary hardware for the relocation of the pump and instructions to make the installation straightforward.

DRP fuel lift pumps are not compatible with waste vegetable oil (WVO) or B20 or higher biodiesel fuels.

DRP pump comes with a 4-YEAR WARRANTY from FASS.

Titanium SIGNATURE SERIES

Fuel Pump and Double Filter

‘19-‘20, 2500/3500 - 100GPH

FASS_TS_D12_100G: $749.00

‘05-‘18 & ‘21-‘22, 2500/3500 - 100GPH

FASS_TS_D07_100G: $749.00

‘98.5-‘04.5, 2500/3500 - 100GPH

FASS_TS_D08_100G: $699.00

‘14-‘18, 1500 EcoDiesel - 110GPH

FASS_TS_D11_110G: $899.00

Fuel pumps include installation and mounting hardware.

SIGNATURE SERIES

Adjustable Fuel Pump

‘10-‘14 FASS_FAS_D05_100G: $599.00

(1/2” Fuel Line Kit, 1/2” Suction Tube Kit, and Wiring Harness)

‘05-‘09 FASS_FAS_D07_100G: $599.00

(1/2” Fuel Line Kit, 1/2” Suction Tube Kit, and Wiring Harness)

‘98.5-‘04.5 FASS_FAS_D08_100G: $549.00

(1/2” Fuel Line Kit and Wiring Harness)

FASS High-Performance Fuel Pump for ‘98.5-‘04.5 trucks

DOES NOT include a draw straw for the fuel tank.

100

GPH

The FASS High-Pressure fuel pump kit lets you place the fuel transfer pump underneath the truck bed frame rail. The HPFP adjustable fuel pump will support stock to 600 horsepower levels.

The fuel pump kit includes all hardware for installation. Fuel pump comes with a LIFETIME WARRANTY from FASS.

PAI Fuel transfer pump

‘89-‘93, 12V - 5.9L, Diaphragm Type PAI-180102-KIT: $29.95

Gaskets and stud kit included.

PAI Fuel transfer pump

‘94-‘98, 12V - 5.9L, Piston Type

PAI-180105-KIT: $54.95

Gaskets and stud kit included.

CUMMINS Fuel Transfer Pump

‘94-‘98, 12V I

PUMP_4988747: $145.95

Includes gaskets and stud kit.

CARTER Electric Fuel Pump

100 GPH

The FASS 95 Titanium fuel pump and filter kit with FASS Whisper Technology offers a reliable high volume pump that provides a consistent flow of fuel (100 GPH) to your injection pump. Each kit comes with a 3 micron fuel filter and fuel/water separator since the kit will bypass your factory fuel filter housing and go directly to your fuel injection pump.

Whisper Technology helps reduce the noise created by aftermarket fuel and air separation diesel lift pumps. By using radius cuts, tighter tolerances on all gears and a high quality military Spec’d Coating over the aluminum base, FASS Fuel Systems was able to develop the quietest fuel air separation system on the market.

This FASS Fuel Pump and Filter will support horsepower levels from stock to 600 horsepower.

Each kit comes with a LIFETIME WARRANTY from FASS.

FASS FUEL PUMP PARTS & ACCESSORIES

See our website for more details.

FASS - Universal Heavy Duty Pickup Frame

Clamp Bracket

FASS - Titanium Fuel Pump Heater Kit

For extremely cold climates.

FASS - High Output Fuel Heater Disk Kit

Includes harness.

FASS - Y-Splitter

Used for installing two #32283 heater probes.

FASS - Replacement Heating Element Probe

For Titanium Series heaters used in HK-1001 heater kit.

FASS - Suction Tube Kit

Bypasses in-tank fuel pumps.

Find fuel filters on pages 4-5.

FASS_CBK1001: $71.25

FASS_HK1001: $160.55

FASS_ HK1002: $160.55

FASS_ HKS1001: $37.05

FASS_ 32283R: $118.75

FASS_ STK1005: $94.05

‘03-‘04

PUMP-P76110: $ 153.00

Mounts on the back of the fuel filter canister.

Fuel Transfer Pump Relocation Kits (‘98.5-‘02)

STANDARD KIT

(3/8” DIA. FUEL HOSE)

VULCANRELOKIT: $116.95

‘BIG LINE’ KIT

(1/2” DIA. FUEL HOSE)

VULCAN_VPPS9802_KIT: $159.95

This kit enables owners of ‘98.5-‘02 trucks to relocate the engine’s problematic fuel transfer pump. The kit consists of a bracket; 3/8” diameter B-20 bio-diesel compatible fuel hose rated at 50 psi; electrical extension; and custom fittings. The benefits of relocation: the transfer pump is not subjected to continual engine vibration; the transfer pump is closer to the fuel tank and operates more like a pusher pump; and should the pump fail, the pump is now very easy to access.

The optional ‘Big Line’ Kit with 1/2” fuel line is a high-performance version of the Standard Kit designed for use in high horsepower trucks. Detailed instructions are included which show you how to move the fuel transfer pump from the engine to the frame rail.

The mounting bracket in this kit will also work with the FASS DRP pump.

NOTE: Fuel transfer pump is not included in Relocation Kit.

Airtex brand fuel pumps available at your local parts store will work with these fuel transfer pump relocation kits. The Airtex fuel pump mounts horizontally rather than vertically like the OEM fuel pump (see photo). To mount the pump, simply flip the bracket so that the short tab is mounted to the frame.

New and Remanufactured OEM Fuel Injectors Lack of maintenance and poor fuel filtration can shorten injector life. If you have trouble with one, the other five will fail shortly thereafter. The labor for one is the same as the labor for six. The replacement parts decision involves serious money and repair time. We offer these new and reman injectors for ‘89-‘18 trucks. Now you have the best of both, a manufacturer and vendor you can rely on.

REMAN ‘13-‘18, 6.7L

Not Chassis Cab trucks.

REMAN ‘07.5-‘12, 6.7L Not Chassis Cab trucks.

NEW ‘04.5-‘07, 5.9L

REMAN ‘04.5-‘07, 5.9L

REMAN ‘03-‘04, 5.9L

NEW ‘98.5-‘02, 24V-RV (275HP)

NEW ‘00-‘02, 24V HO (245HP)

NEW ‘98.5-‘02, 24V (235HP)

Manual Transmission

NEW ‘98.5-‘02, 24V (235HP)

Automatic Transmission

NEW ‘96-‘98 (215HP)

BSH-0986435621: $470.00

BSH-0986435518: $480.00

BSH-0445120238: $480.00

BSH-0986435505: $410.00

BSH-0986435503: $415.00

BSH-0432193635: $98.00

BSH-0432193581: $102.00

BSH-0432193629: $102.00

BSH-0432193630: $108.00

Manual Transmission BSH-0432133844: $104.00

NEW ‘96-‘98 (180HP)

Automatic Transmission and California only.

NEW ‘94-‘95 (175HP)

BSH-0432133860: $104.00

Manual Transmission BSH-0432133860: $104.00

NEW ‘94-‘95 (160HP) Automatic Transmission BSH-0432133859: $104.00

NEW ‘91.5-‘93 with Intercooler BSH-0432133877: $104.00

NEW ‘89-‘91 without Intercooler BSH-0432133888: $110.00

2003 to 2018 injectors have a core charge of $150 each refundable upon return of the core. No core charge for 1989-2002 injectors.

Your old injector cores are required back. Whatever you do, stay with OEM Reman injectors and “get it right” the first time around rather than going with an aftermarket injector and having to do the job twice.

Our website has the full story on injectors (See the “Perfect Collection,” pages 19-31), along with the how-to to save you the labor time (about six hours) should you wish to do the job yourself.

Crossover Tubes & Injector Seals

Fuel Filter Kit (‘97-‘99)

FFK98599: $136.95 $134.95

Has your ‘97-‘99 Turbo Diesel developed a leak at either the top of the fuel filter housing or at the O-ring area of the fuel heater due to years of use and material fatigue?

Have you tried to source a replacement kit from Chrysler or Cummins only to find it is no longer available or ridiculously priced?

Here is a cost-effective solution: use a replacement filter head and corresponding filter/ from the ‘94 to ‘96 vintage truck. The Fuel Filter Kit includes:

Billet aluminum filter head • Water-in-fuel sensor • 4 banjo fitting gaskets • FS1253 fuel filter for ‘97-98, 12V and FS19519 for ‘98.5-99, 24V

To make the water-in-fuel sensor operative you simply cut and splice into the existing wire leads to the sensor.

NOTE: Kit does not have provisions for the fuel heater unit on ‘98.5-‘99 trucks. If the fuel heater unit on your ‘98.5-‘99 truck is leaking, we have a Fuel Heater Block Off that solves the problem on page 37. Or get a replacement fuel heater seal on page 37.

(To upgrade banjo bolts or add fuel pressure, see the fittings on page 39.)

NOTE: Kit does not have provisions for the fuel heater unit on ‘98.5-‘99 trucks. If the fuel heater unit on your ‘98.5-‘99 truck is leaking, we have a Fuel Heater Block Off that solves the problem on page 35. Or get a replacement fuel heater seal on page 35.

BILLET ALUMINUM

FUEL FILTER HEAD KIT (‘94-’96)

GG-3925600-KIT: $89.95

‘94-‘96 Dodge Cummins fuel filter heads are no longer available from Chrysler so we sourced our own. Made from billet aluminum, this filter head is a direct bolt-on replacement of the OEM part.

It can also be used on other applications.

The Fuel Filter Head Kit includes:

Replacement Filter Head • (4) Banjo Bolt Gaskets • Filter Nipple

(To upgrade banjo bolts or add fuel pressure, see the fittings on page 39.)

FLEECE PERFORMANCE

SUREFLO

SureFlo performance sending units are designed to work with stock and aftermarket lift pumps and mounts directly into your stock sending unit location. It features factory style quick disconnects to adapt your stock fuel lines at the tank, giving you the cleanest installation available, and requiring no cutting or drilling of the tank. Similar to OE, SureFlo works by drawing fuel from, and returning fuel to, the bucket assembly at the base of the unit. This ensures you are always drawing fuel into your pump and not drawing air into the fuel system.

Features:

• OEM style fitment that requires no tank cutting or drilling

• New fuel level electronics and fuel float

• Heavy duty billet aluminum cap

• Universal -8 AN ports for professionally plumbing a custom fuel setup

Also includes:

• New tank flange seal

• Pigtail adapter

Fuel injector line Sets

Fuel injector and fuel supply lines

24V Fuel filter to injection pump. NEW!

Return Line 3945707: $50.95 VP44 to tee fitting (Grommet seal & nut included.)

Return Line 3942966: $56.95 Cylinder head to tee fitting (Grommet seal & nut included.)

Return Line 3942592: $36.95

fitting to quick connect (Grommet seal & nut included.)

For fuel return line.

#1 3909438: $87.95 #2 3903486: $79.95

#3 3903487: $79.95

#4 3903488: $77.95

#5 3903489: $77.95

Male Union Tee 3908985: $13.95 Connects 3908988 & 3918641 ‘89

#6 3903490: $74.95

CUMMINS Supply Line 3908988: $59.95

Outlet of fuel filter to brass union.

CUMMINS Supply Line 3918641: $55.95

Brass union to VE injection pump.

CUMMINS Supply Line 3910150: $65.95 Lift pump to fuel filter.

Injector Return Line 3909696: $146.95

Return Line 3905707: $61.95

Injection pump to tee. Non intercooled.

Fuel Supply Line Grommet 3905351A: $16.95

Fuel Return Line Grommet 3905391: $13.95

Fuel Drain Tube 3912137: $56.95

Union Tee to Quick connect fitting. Non Intercooled.

1989-1993 FIRST GENERATION

CUMMINS Fuel System Bleed Screw and Captive Washer (‘89-‘98, 12V)

CUMMINS Fuel Filter

Housing Banjo Bolt (‘89-‘98, 12V) Bolt is for the #3939570 bleeder screw on this page. Requires 2 3963983 banjo bolt gaskets. See this page.

CUMMINS Fuel Return Check Valve (‘89-‘98, 12V)

Requires 2 #3918188 washers. See this page.

CUMMINS Fuel Filter Inlet/Injector Return

Banjo Bolt - 8mm port (‘89-‘98, 12V)

Works with #3924726 fuel bleed screw.

Requires 2 BF-3918188 8mm banjo bolt washers. See this page.

CUMMINS Fuel Injector Return Line

Banjo Bolt (‘89-‘98, 12V)

Use one 4942278 horseshoe shaped washer per bolt.

OEM VE Pump Return Overflow Valve (‘89-‘93)

(Requires 2 #BF-3963983 washers. See below.)

8mm Sealing Washer

Rubber sealing washer for ‘89-‘98, 12V Dodge Cummins fuel filter bleed screw and fuel injector return lines.

1994-2002 SECOND GENERATION

VULCAN OE Style Fuel Tank Module and Sending Unit (‘98-‘04)

For trucks with no fuel pump. Includes tank seal. Freddy Frugal says this fuel module is less than the price of OEM.

* NOTE: Many early trucks have had the fuel level sending units replaced or updated in the past. We recommend removing the module and confirming which sending unit is installed before ordering.

1994-2002 SECOND GENERATION

for ‘89-’98, 12V Dodge Cummins fuel filter bleed screw and fuel injector return lines.

This fuel heater block-off allows you to remove the leaky fuel heater from the discontinued fuel filter top. Includes 2 Viton o-rings.

1994-2002 SECOND GENERATION

CUMMINS Fuel System Bleed Screw and Captive Washer (‘89-‘98, 12V)

CUMMINS Fuel Filter

Housing Banjo Bolt (‘89-‘98, 12V) Bolt is for the #3939570 bleeder screw on this page. Requires 2 3963983 banjo bolt gaskets. See this page.

CUMMINS Return Check Valve (‘89-‘98, 12V)

Requires 2 #3918188 washers. See this page.

CUMMINS Fuel Filter Inlet/Injector Return Banjo Bolt - 8mm port (‘89-‘98, 12V)

Works with #3924726 fuel bleed screw.

Requires 2 BF-3918188 8mm banjo bolt washers. See this page.

Cummins Water-in-Fuel Sensor (‘00-‘07, 5.9L) 10mm thread.

AFTERMARKET Water-in-Fuel Sensor

Viton O-ring (‘97-‘99, 5.9L)

This viton o-ring provides a

Fuel Heater Block Off (‘00-‘07, 5.9L)

The fuel heater block off V2 allows you to remove a leaky fuel filter heater/thermostat since the fuel heaters have been discontinued.

Fuel Filter Heater O-Ring (‘00-‘07)

This Viton o-ring is an upgrade from an OEM part and will provide a longer lasting seal.

Fuel Filter Heater O-Ring (‘98.5-‘99)

This Viton o-ring is an upgrade from an OEM part and will provide a longer lasting seal.

OEM VP44 Fuel Overflow Valve Kit (‘98.5-‘02, 24V)

This kit comes complete with the fuel overflow valve and two sealing washers.

OEM Fuel Overflow Valve Kit (‘94-‘98, 12V)

This kit comes complete with the fuel overflow valve and two sealing washers.

GG-FHORING

CUMMINS P7100 Injection Pump Oil Feed Supply Line (‘94-‘98, 12V)

CUMMINS Fuel Pump Elbow (‘94-‘98, 12V) Thread to barbed. Installs on the side of the lift pump. *Barbed fitting available on page 39.

BD LED Low Fuel Pressure Indicator (‘98.5-‘07, 5.9L) Indicator lights up when fuel pressure descreases to 5 psi. Tapped banjo bolt and gaskets included.

5.9L)

lights up when fuel pressure descreases to 5 psi. Tapped banjo bolt and gaskets included.

5.9L)

The fuel heater block off V2 allows you to remove a leaky fuel filter heater/thermostat sicne the fuel heaters have been discontinued.

5.9L) This Viton o-ring is an upgrade from an OEM part and will provide a longer lasting seal.

injection rail comes complete with rail pressure sensor and fuel pressure limiting valve.

injection rail comes complete with rail pressure sensor and fuel pressure limiting valve.

6.7L) * Want something a little more robust than this tool made of plastic? See page 38 for the billet aluminum cap.

MOPAR Fuel Filter Cap (‘19-‘23, 6.7L 2500/3500/4500/5500 & ‘20-’23 Ram 1500 EcoDiesel)

$47.95

2014-2023 RAM 1500 ECODIESEL - 2019 CLASSIC

MOPAR Fuel Filter Canister (‘14-‘19)

$237.95

MOPAR Fuel Filter Cap (‘19-‘23, 6.7L 2500/3500/4500/5500 & ‘20-’23 Ram 1500 EcoDiesel)

Fuel Canister Drain Valve (‘20-‘23)

EZ Fuel Filter Canister Drain Valve (‘14-‘19) ( M12 - 1.5mm)

FUEL SYSTEM ACCESSORIES

BILLET ALUMINUM FUEL CANISTER CAP

‘10-‘23 LT-67FUELCAP : $86.95

Is your plastic fuel filter canister cap showing the signs of aging? You know, the rounded-off shoulders of the 28mm hex head. We’ve also seen the caps over-torqued and cracked. Here is a stylish and functional solution. A billet aluminum fuel cap that fits the 2010-newer Ram 6.7-liter Cummins Diesel engines.

FUEL FILTER CAP WITH FUEL PRESSURE TEST PORT

‘00-‘07, 5.9L LT-59FUELCAP : $72.95

Black anodized billet aluminum with 1/8” pressure port and a 3/4” hex head for easy removal.

‘10-‘18, 6.7L

FUEL DISTRIBUTION BLOCK KITS

‘10-‘18, 6.7L BD-1050371: $95.95

‘03-‘09, 5.9L & 6.7L BD-1050370: $105.95

Fuel Pressure Test Kit (‘98.5-‘02, 5.9L)

This kit is a 2-1/2” liquid filled 0-30 psi gauge in a stainless steel housing with a built in snubber, Weatherhead 250 psi hose, brass push-lock fittings and brass Schraeder valve actuator for ‘00-‘02 trucks (with rubber seal and knurled thumb screw). Ships with 1/8 NPT fitting for use with ‘98.5-‘99 trucks.

NOTE: Purchase the FPADPT-KIT to allow you to check the fuel pressure on all ‘89‘97, 12V and ‘03-‘07, 24V trucks.

VULCAN Draw Straw I (‘94-‘04)

The CNC machined billet Draw Straw I features dual ports which allows the user to install a regulated return fuel system without drilling the top of the module or cutting the filler neck tube for a second return line. This makes for a clean and secure installation. Works with 3/8” and 1/2” fuel line

NOTE: Will not work on trucks equipped with and in-tank pump.

VULCAN Draw Straw III (‘98.5-‘18)

‘03-‘09, 5.9L & 6.7L

These billet aluminum blocks are used to replace the factory fuel filter housings after the installation of an aftermarket fuel pump/ filtration system (FASS, etc.). All mounting hardware and fuel fittings are included. Also has pressure ports for checking fuel pressure.

FUEL FILTER HOUSING DELETE

‘03-‘09, 5.9L & 6.7L GG-FFD0309: $41.95

This aluminum block is used to replace the factory fuel filter housings after the installation of an aftermarket fuel pump/ filtration system (FASS, etc.). All banjo washers are included. Also has pressure ports for checking fuel return pressure.

FUEL TANK STRAPS

Direct replacements for the originals. Manufactured from durable materials to withstand harsh road and weather conditions.

The Draw Straw™ 3 Is the threaded version of the original Draw Straw 2 for use with plastic or metal tanks in Dodge trucks of 3/8” thickness or less. This unit is a single port billet aluminum fitting that requires a 3/4” hole to be drilled in the tank. This design keeps all threaded connections out of the tank so there is nothing to come loose inside. The 16” draw tube is compatible with all motor fuels.

VULCAN Draw Straw V (‘98.5-‘18)

The Draw Straw V HiFlow allows for greater fuel volume by using 1/2” plumbing. The DSV installs inside the tank module in place of the factory pump on fuel systems/tanks in ‘05-‘09 trucks. You can use the original OEM supply connection as the FASS return line putting more fuel back into the module for low fuel level situations. No tank drilling! A simple 5/8” inch hole in the module is all that’s required to insert the DSV HF fitting.

Works with 3/8” and 1/2” fuel line

VULCAN Filter to Injection Pump

Hose Kit (‘98.5-‘07, 5.9L)

This hose connects the fuel filter outlet to the injection pump. It is great for those with a FASS HPFP or other systems who want to completely eliminate the restrictions in the fuel supply circuit.

VULCAN Universal Fit

STAINLESS

ND-TS8993: $86.95

Replace rusty fuel tank straps on your Dodge Ram 2500/3500 with a 30-gallon fuel tank with these direct replacement straps.

STAINLESS STEEL FUEL TANK STRAPs,

ND-TS9402: $86.95

Replace rusty fuel tank straps on your Dodge Ram 2500/3500 with these direct replacement straps.

Fuel Pressure Line (‘98.5-‘02)

This hose is 1/4” diameter (inside diameter), 30” in length, and is rated for 100 psi. The assortment of fittings for each end of the hose allow you to add a fuel pressure sending unit to the fuel system. Purchase a tapped banjo bolt to use this fuel pressure line on other year trucks.

VULCAN_DS1 $79.99

VULCAN_VP02 $53.99

VULCAN_DS3 $42.00

VULCAN_DS5 $69.99

VULCAN-FH $24.00

‘94-’02

STEEL FUEL TANK STRAPs, ‘91-’93

‘03-‘19, 2500/3500 (35 Gallon Tank) DRM578305: $42.95

‘94-‘02, 2500/3500 DRM578191: $45.95

Fuel Pressure Test Adapter with Schrader Valve and Adjustable Snubber (‘89-‘07, 5.9L) This kit works with the VULCAN Universal Fit Fuel Pressure Line (VULCAN-FH).

Fuel Pressure Test with Schrader Valve Adapter (‘89-‘07, 5.9L)

The Fuel Pressure Test Adapter allows for a quick and easy fuel pressure check on all Ram trucks with the Cummins Turbo Diesel engine. Testing the fuel pressure is a must when diagnosing fuel delivery problems. Kit includes: banjo fitting, gaskets, and Schraedar valve with cap.

GATES Barricade ® Fuel Line

Heavy Duty replacement fuel hose. Will work with Diesel, Bio-Diesel, gas and other fuel types. We also offer 5/16” diameter fuel hose to repair/replace the problematic fuel return hose used on ‘94-‘98, 12-valve engines.

Auto Meter Fuel Pressure Line

If you are installing an AutoMeter electric fuel pressure gauge in your Ram Cummins truck, you MUST install this braided stainless steel line kit and #3279 fuel pressure snubber (sold separately) to prevent premature failure of the sending unit. Failure to do so will void the gauge warranty.

Auto Meter Fuel Pressure Snubber

GG-FPSNUB-KIT $26.95

CUMMINS Banjo Snubber

12MM x 1.5 thread (‘89-‘07, 5.9L)

Dampens the pressure spikes of the Cummins lift pump. The snubber installs at the filter housing and takes the place of a 12mm banjo bolt and makes fuel pressure gauge installation easy. (Gaskets included.)

‘89-‘07, 5.9L

BF-BBS010

$23.99

FPADPT-KIT $21.95

5/16” DIAMETER GATES-27324

$3.95/ft.

3/8” DIAMETER GATES-27325

$3.95/ft.

1/2” DIAMETER GATES-27326

$4.25/ft.

CUMMINS Banjo Snubber

14MM x 1.5 thread (‘94-‘98)

Designed specifically for Cummins

5.9L diesel engines and dampens the pressure spikes of the lift pump. It installs at the injection pump only and takes the place of a 14mm banjo bolt and makes fuel pressure gauge installation easy. (Gaskets included.)

Barbed Banjo Fitting Clamp included with fitting.

Individual Tapped (M12) Banjo Fittings

(‘89-‘93 & ‘98.5-‘07, 5.9L)

These Banjo Fittings feature a large diameter (.187” vs. .130”) fuel port. The fittings are SAE (3/4” hex) vs. the stock 17mm hex design. Fitting on the top is the standard fitting, while the fitting on bottom has a built-up hex drilled to accept a 1/8 NPT male threaded fuel pressure sensor. ( Requires 2 replacement gaskets . Gaskets on page 36.)

Vulcan Performance

Jacobs Brake Fuel Line Adapter

‘ 94-‘98

BF-CBS010

$24.49

M12 X 3/8

B1206: $7.49 each

M14 X 3/8

B1406: $7.49 each

TAPPED

BF-LONG-TAPPED $7.00

UNTAPPED

BF-LONG-UNTAPPED $4.50

1/8 NPT RLT Snubber

It is highly recommend that you use this snubber on trucks with the VP44 injection pump to dampen the fuel pulsations (hydraulic hammering) created by the injection pump.

Fuel Filter Plug (‘89-‘96)

This billet aluminum plug is handy to have when your truck’s water-in-fuel sensor/drain fails and is leaking fuel. Install it and stop the leak.

This 1/2” 12MM adapter is designed for use with trucks equipped with a Jacobs Brake. When fitting a fuel line to the injection pump there is a clearance issue. Allows for pump clearance without using a restrictive banjo fitting.

Vulcan Performance Modified Fuel Module (‘98-’04, 2500/3500)

Replacement aftermarket fuel tank module without fuel pump. Uses factory 3/8” pickup and 5/16” return quick-connect fittings.

Freddy Frugal says this fuel module is less than the price of OEM. See pg. 34 for MOPAR Fuel Module #4897668AI.

Vulcan Performance Female

Quick-Connect Fuel Fitting - to 1/2”

Connects 3/8” quick connect to 1/2” barbed fuel fitting.

Vulcan Performance Female

Quick-Connect Fuel Fitting - to 3/8”

Connects 3/8” quick connect to 3/8” barbed fuel fitting.

Fuel Pressure Tee

Inline fuel pressure tee available in either 1/2”, 3/8” or 5/16” diameter barbed fittings with 1/8 NPT threaded fitting. Works well with aftermarket FASS fuel systems.

VULCAN_PBF $20.00

VULCAN_MFM20E $229.99

VULCAN_FQC68PL $8.50

VULCAN_FQC6 $8.00

B6 4600 Series (For

STOCK RIDE HEIGHT.)

I f you’re looking for suspension performance, the B6 4600 Series shock absorber is the best solution to improve your truck’s ride.

Monotube gas pressure construction • Improved ride and handling Added traction and enhanced stability • Increased performance when hauling or towing.

‘19-‘23, 3500 4WD: $99.00 each

(With air leveling suspension.)

REAR BIL-24-302302

‘19-‘23, 2500 4WD: $99.00 each

(With air leveling suspension.)

REAR BIL-24-302111

‘19-‘23, 3500 4WD: $99.00 each

(Excludes air leveling suspension - rear only.

FRONT BIL-24-302289

REAR BIL-24-302296

‘19-‘23, 2500 4WD: $99.00 each

(Excludes air leveling suspension - rear only.

FRONT BIL-24-302074

REAR BIL-24-302081

‘14-‘18, 2500 4WD w/Air Ride: $99.00 each

REAR BIL-24-285650

‘14-‘18, 2500 4WD

(Excludes air leveling suspension - rear only.

FRONT BIL-24-240390 $99.00 each

REAR BIL-24-239462 $99.00 each

‘14-‘23, 2500 2WD

(Excludes air leveling suspension - rear only.

FRONT BIL-24-269421 $99.00 each

REAR BIL-24-269439 $99.00 each

‘13-‘18, 3500 4WD & 2WD

(Excludes air leveling suspension - rear only.)

FRONT BIL-24-238526 $99.00 each

REAR BIL-24-238533 $99.00 each

‘13, 2500 4WD

FRONT BIL-24-186070 $99.00 each

REAR BIL-24-186094 $89.00 each

‘03-‘12, 2500/3500 4WD

FRONT BIL-24-186070: $99.00 each

REAR BIL-24-186094: $89.00 each

‘03-‘12, 2500/3500 2WD

FRONT BIL-24-186063: $99.00 each

REAR BIL-24-186087: $89.00 each

B8 5100 Series

BILSTEIN B8 5100 series are designed specifically to help your lifted Dodge Ram truck, supplying the correct tuning and length for your specific lift.

Monotube gas pressure technology

Easy to install; direct bolt-on; no modification required

One Piece Aluminum Rod Guide & Seal Keeps dirt out and maintains a nearly friction-free surface for longer life.

‘94-‘02, 2500/3500 4WD

FRONT BIL-24-185172: $89.00 each

REAR BIL-24-188036: $89.00 each

‘94-‘02, 2500/3500 2WD

FRONT BIL-24-184847: $89.00 each

REAR BIL-24-184854: $89.00 each

‘89-‘93, W250/ W350 4WD: $89.00 each

Massive Self-Adjusting Digressive Piston Instantly reacts and adjusts for any condition...smooth road, rough road or no road. Provides maximum vehicle body motion control while maintaining superior comfort.

High Pressure Nitrogen Gas & “Floating” Dividing Piston Eliminates the possibility of oil foaming and performance loss.

FRONT BIL-33-248097

‘89-‘93, W250/ W350 4WD: $99.00 each

REAR BIL-24-248105

‘89-‘93, D250/ D350 2WD: $99.00 each

FRONT BIL-24-185165

‘89-‘93, D250/ D350 2WD: $105.00 each

REAR BIL-24-185158

“What is the difference between the 4600 Series and 5100 Series shocks?”

Other than the color, the 5100 Series shocks are for trucks that have up to a 2.5” lifted suspension and feature stiffer valving. They’re not designed for a specific Ram application.

Massive Self-Adjusting Digressive Piston

Instantly reacts and adjusts for any condition... smooth road, rough road or no road. Provides maximum vehicle body motion control while maintaining superior comfort.

High Pressure Nitrogen Gas and “Floating” Dividing Piston Eliminates the possibility of oil foaming and performance loss.

4WD w/o Air Ride: $108.00 each

0”-1” lift) BIL-24-302043

‘14-‘23, 2500 4WD

2”-2.5” lift ) BIL-24-268639: $108.00 each

4WD w/o Air Ride: $108.00 each

REAR (2” lift ) BIL-24-285681

4WD w/Air Ride: $108.00 each

REAR BIL-24-285667

‘13-‘23, 3500 4WD

2”-2.25” lift ) BIL-24-251747: $ 108.00 each

0-1” lift ) BIL-24-302326: $ 108.00 each

Excludes air leveling suspension - rear only.)

‘13-‘18, 2500 4WD

2”-2.5” lift ) BIL-24-251754: $ 103.00 each

0-1” lift ) BIL-24-239455: $108.00 each

Excludes air leveling suspension - rear only.)

0-2.5” lift ) BIL-24-185776: $108.00 each

0-2” lift ) BIL-24-191203: $108.00 each

‘03-‘12, 2500/3500 4WD

FRONT (0-2.5” lift ) BIL-24-185776: $108.00 each

REAR (0-2” lift ) BIL-24-191203: $108.00 each

‘94-‘02, 2500/3500 4WD

FRONT (0-2.25” lift ) BIL-24-185776: $108.00 each

REAR (0-1” lift ) BIL-24-185783: $108.00 each

REAR (0-2” lift ) BIL-24-191203: $108.00 each

‘89-‘93, 2500/3500 4WD

FRONT BIL-33-185590: $108.00 each

REAR BIL-33-185569: $108.00 each

‘14-‘23, RAM 2500 4X4 POWER HOP KIT

GG-PHOPKIT: $235.95

This kit dampens axle harmonics under power and allows for extra load carrying capacity. Fits 2500 4x4 trucks only.

Kit includes:

• Bilstein Damper

• Axle Mounting Bracket

• Mounting Hardware

H TDR 98, pg. 7

NOTE: Will not work on Power Wagon. Please make sure you have the 4 mounting holes on the top of the differential and mounting bracket on frame crossmember.

Brake Pads

Our local Dodge dealer introduced the MOPAR brake pads to us, and we believe they are a great value. If you are happy with the OEM brake pads on your truck, you will be happy with these.

FRONT DISC BRAKE PADS

‘19-‘23, 2500/3500 2WD & 4WD

BRAKE-68461656: $259.95

‘09-‘18 , 2500/3500

BRAKE-2AMV1148AA: $82.00

‘09-‘18 , 1500

BRAKE-2AMV1350AC: $74.95

‘08-‘23, 4500/5500 2WD & 4WD 2AMV1093AC: $94.95

‘03-‘08 , 2500/3500

BRAKE-2AMV1267AA: $70.00

‘00-‘02 , 2500/3500

BRAKE-2AMV1254AB: $51.95

REAR DISC BRAKE PADS

‘19-‘23, 2500/3500 w/68RFE

BRAKE-68453097: $283.00

‘19-‘23, 3500 w/Aisin

BRAKE-68451229 $310.95

‘09-‘18 , 2500/3500

BRAKE-2AMV2158AB: $98.95

‘97-‘99, 2500 4WD - 7500LB AXLE

BRAKE-V1012364AB: $68.95

‘97-‘99, 2500 4WD - 8800LB AXLE

BRAKE-2AMV1279AA: $66.95

‘94-‘99, 2500 2WD

BRAKE-V1012364AB: $68.95

‘94-‘99, 3500 2WD/4WD

BRAKE-2AMV1279AA: $66.95

‘94-‘96, 2500 4WD - 3500LB AXLE

BRAKE-V1012364AB: $68.95

‘94-‘96, 2500 4WD - 4500LB AXLE

BRAKE-2AMV1279AA: $66.95

‘08-‘23, 4500/5500 2WD & 4WD

2AMV1093AC: $94.95

‘01.5-‘08 , 2500/3500

BRAKE-2AMV2257AB: $69.95

LEARN MORE: TYPES OF BRAKE PADS genosgarage.com/downloads/TechPDF/TDR51_BrakePadSpottersGuide.pdf

Brake Pads

SUPER-DUTY

(‘19-‘23) 2500/3500

FRONT BRAKE-HB930P.786: $85.00

(‘09-‘18) 2500/3500

FRONT BRAKE-HB633P.790: $141.00

REAR BRAKE-HB634P.750: $126.00

(‘03-‘08) 2500/3500

FRONT BRAKE-HB552P.722: $122.00

REAR BRAKE-HB299P.650: $117.00

(‘01.5-‘02) 2500/3500

REAR BRAKE-HB299P.650: $117.00

HEAVY-DUTY

(‘00-‘02) 2500/3500

FRONT BRAKE-HB487F.733: $83.95

(‘97-‘99) 2500 4WD

FRONT (7500lb axle) BRAKE-HB296P.670: $89.00

FRONT (8800lb axle) BRAKE-HB298P.787: $104.95

(‘94-‘99) 2500/3500

FRONT (2500 2WD) BRAKE-HB296P.670: $89.00

FRONT (3500 2WD/4WD) BRAKE-HB298P.787: $104.95

(‘94-‘96) 2500 4WD

FRONT (3500lb axle) BRAKE-HB296P.670: $89.00

FRONT (4500lb axle) BRAKE-HB298P.787: $104.95

Brake pad compounds are a compromise.

If you choose the HAWK Super-Duty pad (suffix “P”) you can expect a higher operating temperature and less fade than stock brake pads. They will also have a higher initial “bite” than the stock pad. The trade-off: moderate dust and moderate noise as compared to the stock pad which is low dust and low noise. Hawk advises that Super-Duty brake pad wear is comparable to the street brake pad

* The HB-487.733F brake pad listed for the ‘00-‘02 trucks is only available in “F” compound which is Hawk’s designation for Street. This compound is much like a stock Mopar pad.

Brake Bleeder Kit ( Round 3-tab Twist Reservoir Cap) Kit includes: 2qt capacity tank and tubing for bleeder valve.

MP-0113: $85.45

Metal Rectangular Adapter Plate

For older style rectangular reservoir. Includes clamping hardware.

MP-1105: $40.46

Brake ROTORS

FRONT BRAKE ROTORS

‘08-‘23, 4500/5500, 2WD/4WD

68415392AA: $235.00

‘09-‘18 , 2500/3500/3500CC

2AMV2182AB: $124.00

‘03-‘08 , 2500/3500/3500CC

‘06-‘08 , 1500 Mega Cab

2AMV1050AA: $110.95

‘00-‘02 , 2500/3500

2AMV5230AA: $99.95

REAR BRAKE ROTORS

‘08-‘23, 4500/5500, 2WD/4WD 68415393AA: $179.95

‘09-‘18 , 2500/3500/3500CC

2AMV2184AB: $169.00

‘03-‘08 , 2500/3500/3500CC

‘06-‘08 , 1500 Mega Cab

2AMV0144AA: $129.95

‘00-‘02 , 2500

‘01-‘02, 3500

2AMV9932AA: $114.00

Power Brake Bleeder Kits & Accessories

STEERING, SUSPENSION & BRAKES

Brake Bleeder Kit ( Rectangular/Oblong Reservoir Cap) Kit includes: 2qt capacity tank, metal rectangular adapter plate, machined billet aluminum adapter cap and clamping hardware.

MP-0105: $80.95

EXTRA ADAPTERS

Aluminum Adapter Round aluminum adapter for Chrysler Ram trucks.

MP-1113: $44.96

ACCESSORIES

16oz. Catch Bottle

Kit includes: 16oz. catch bottle with tubing to attach to bleeder valves.

MP-1810: $13.46

DOT 5.1 Hi-Performance Brake Fluid

AP_DOT_5.1 (500 ml/17 oz.): $12.25

DOT 5.1 fluid provides a high boiling point and relatively stable viscosity over a wide range of temperatures. It is also compatible with DOT 3 or 4 fluid and can be mixed without concern. We recommend two bottles to fill your truck’s brake system.

H TDR43, p14-17

Front Manual

DUAL REAR WHEEL HUB KIT

‘09 SAST-D09DRW: $1925.00

‘00-‘08 SAST-D0008DRW: $1925.00

2500/3500 SRW TRUCKS

NOTE: Hubs will extend 5.75” past wheel mating surface.

‘12-‘18 SAST-D1215: $1700.00

‘10-‘11 SAST-D1011: $1700.00

‘09 SAST-D09: $1700.00

‘00-‘08 SAST-D0008: $1700.00

‘94-‘99 SAST-D9499: $1700.00 ( No ABS)

SINGLE REAR WHEEL HUB KIT

NOTE: ‘13-‘18 2500/3500 SRW truck (Bighorn or Longhorn) hub conversion will not work on trucks with OEM aluminum wheels with small Ram center cap without modifying the wheels. They need a minimum clearance of 4.224”.

With greater frequency we have listened as customers have asked for manual locking front hubs.

In recent Turbo Diesel Register magazines there have been articles on these products (Issue 82 and Issue 62) that discussed the pros and cons of this accessory, the primary benefit being reduced wear on the front drivetrain: the axle shafts and corresponding differential gearing are disengaged. Other benefits: fuel economy thanks to the elimination of 150-pounds of rotating mass, universal joint wear is all but eliminated and a user-serviceable set of wheel bearings.

We’re thrilled to offer you the SpynTec designed front manual hubs.

HEAVY-DUTY 4WD

Steering Dampers (‘00-‘23, 2500/3500)

‘14-‘23, RAM 2500

‘13-‘23, RAM 3500 & 3500 Cab & Chassis

68232449AC: $152.95

2WD & 4WD Steering Dampers (‘08-‘23, 4500/5500)

‘13, RAM 2500

‘08-‘12, RAM 2500/3500 & 3500 Cab & Chassis

MOP-5154661AD: $129.95

4877184AA: $199.95

‘00-‘07, RAM 2500/3500, Cab & Chassis

MOP-52106909AG: $99.95

NOTE: If the Mopar steering upgrade has been performed, you’ll need the ‘08-‘13 steering damper.

‘98-‘99, RAM 2500/3500, 4WD MOP-52039280: $59.95

Eyelet to eyelet.

‘08-‘12, RAM 4500/5500, 2WD 52855623AG: $147.95

‘08-‘12, RAM 4500/550, 4WD 52013986AE: $175.00

Steering Dampers

Help dampen steering vibrations and restore the steering control of your ‘03-‘22 Dodge Ram truck.

B8 5100 DUAL STEERING DAMPER KIT

RAM 2500 (‘14-‘23, 2500 4WD) RAM 3500 (‘13-‘23, 3500 4WD) BIL-53-264817:

RAM 2500 (‘13, 4WD)

RAM 2500/3500, (‘08-‘12, 4WD)

BIL-33-170794: $106.00

Steering Box Stabilizer

RAM 2500/3500, (‘03-‘07, 4WD)

BIL-24-164870: $105.00

NOTE: If the Mopar steering upgrade has been performed, you will need the ‘08-‘13 steering damper.

4 WHEEL-DRIVE

‘03-‘22, 2500/3500 4WD BD-1032003: $255.95

‘94-‘02, 2WD BD-1032002: $237.95

‘94-‘02, 4WD BD-1032004: $237.95

2 WHEEL-DRIVE

BD’s Steering Box Stabilizer (SBS) eliminates steering wander and wobble caused by excessive shaft play in the steering box of late-model Dodge trucks. Designed for easy, bolt-in installation (about one hour). The SBS virtually eliminates frame flex at the steering box mounting point, resulting in more positive steering feel.

The BD SBS is black powder coated for corrosion resistance and features a greasable, high-quality bearing for reliable operation.

HOW TO CORRECT YOUR TRUCK’S STEERING WOES

Front SwaY Bar End Links (‘00-‘22, 2500/3500)

‘13-‘22 BD-1032052: $179.95

‘10 -‘12 BD-1032051: $179.95

‘00-‘09 BD-1032050: $179.95

Due to the heavy demands put on the ‘00-‘21 Ram 4WD 2500/3500 pick-ups, the front sway bar end links are prone to wearing or even breaking when the truck is lifted due to the stress of the axle dropping.

Download the ‘TDR Buyer’s Guide’ in the Technical Information section of our website for more details.

Sway Bar END Links

‘00-‘12

FRONT - STANDARD HEIGHT TRUCKS

‘13-‘22, 3500 4WD & ‘14-‘21, 2500: SMX-1315: $169.99

9/16” stud. 5.5” center to center.

‘03-‘12, 2500/3500 2WD w/IFS: SMX-1229: $159.99

7.5” center to center.

‘11-‘12, 2500/3500 4WD & ‘13, 2500: SMX-1311: $125.99

9/16” stud. 4.5” center to center.

‘13-‘22

BD’s Sway Bar End Links have a Dual Pivot Design that allows for greater amount of articulation and less stress. Long life urethane bushing design allows for greater flex without breaking and won’t seize due to the elements. NOTE: Designed for use on trucks with stock or up to a 3” lift.

Adjustable Track Bar Kits (‘94-‘22)

‘03-‘12, 2500/3500 4WD ‘ 94-‘02, 4WD

BD-1032013: $367.95 BD-1032011: $540.95

‘14-‘22, 2500 4WD

‘13-‘22, 3500 4WD

BD-1032018: $367.95

With the OEM ball joint design on ‘94-‘12 trucks, frequent maintenance is required to prevent side-to-side movement of the front axle which can cause wear, hammering, wandering and the dreaded “Death Wobble.” BD’s Track Bar is a good solution for steering stability and is a great complement to BD’s Steering Box Stabilizer. Plus, it is adjustable to accomodate up to 3”-4” lifts.

REPLACEMENT BUSHINGS, (‘94-‘12, 2500/3500)

BD-1302033-1: $44.95

Replacement poly bushings for BD Adjustable Track Bar Kits 1032013 and 1032011.

‘07-‘12 truck will require use of one or both steel sleeves included in this bushing kit.

68480876AA:

Sold individually.

Control Arm Bump Stop

2WD (‘03-‘13, 2500/3500) 52113300AB: $38.95

2WD (‘94-‘02, 2500/3500) 52087636AC: $22.95

Eliminate suspension “crash” by replacing worn out bump stops with a set of OEM bump stops. Sold individually.

‘06-‘10, 4WD including 1500 Mega Cab: SMX-1227: $125.99

9/16” stud. 4.5” center to center.

‘03-‘05, 4WD: SMX-1226: $125.99

10mm stud with taper. 4.5” center to center.

‘00-‘02, 4WD: SMX-1225: $125.99

12mm stud with taper. 4.5” center to center.

‘98-‘99, 4WD: SMX-122445: $125.99

12mm stud with taper. 4.5” center to center.

‘95 (April)-‘97, 4WD: SMX-1224: $125.99

12mm stud with taper. 3.5” center to center.

‘94-‘95 (March) 4WD: SMX-1222: $99.50

12mm short stud. 3.5” center to center.

FRONT - TRUCKS WITH LIFT KITS (up to 3” lif t )

‘13-‘22, 3500 4WD & ‘14-‘21, 2500 4WD: SMX-1315L:

9/16” stud. 6” center to center.

‘11-‘12, 2500/3500 4WD & ‘13, 2500: SMX-1311L:

9/16” stud. 6.5” center to center.

‘06-‘10, 4WD including 1500 Mega Cab: SMX-1227L:

9/16” stud. 5.5” center to center.

‘03-‘05, 4WD: SMX-1226L: $125.99

10mm stud with taper. 5.5” center to center.

‘00-‘02, 4WD: SMX-1225L: $125.99

12mm stud with taper. 5.5” center to center.

‘98-‘99, 4WD: SMX-122455: $125.99

12mm stud with taper. 5.5” center to center.

‘95 (April)-‘97, 4WD: SMX-1224i: $125.99

12mm short stud with taper. 3.0” center to center.

‘94-‘95 (March) 4WD: SMX-1222i: $119.99

12mm short stud. 3.0” center to center.

REAR - STANDARD HEIGHT TRUCKS

‘07-‘12, 2WD & 4WD 4500: SMX-7382: $159.95

‘94-‘02, 4WD w/Factory Sway Bar: SMX-7371: $169.99

These sway bar links are self aligning and constantly preloaded, maintenance free, and impervious to salt and debris. MAXX Links replace the wear-prone stabilizer link completely.

The sway bar end link kit contains:

• Two link pin axle studs manufactured from heat treated 4140 alloy steel

• Four high-performance urethane bushings

• Two vertical bolts sleeves

• Sway bar end link bushings

• All fasteners

FRONT SWAY BAR END LINK (‘08-‘23, 4500/5500, 2WD & 4WD)

68020464AC: $49.95

Sold individually.

FRONT SWAY BAR FRAME MOUNT BUSHING (‘08-‘23, 4500/5500, 2WD & 4WD)

55398037AD: $84.95

Sold individually.

FRONT ‘13-‘22, 4WD

FRONT ‘03-‘05, 4WD

REAR ‘07-‘12, 2WD & 4WD

FRONT ‘00-02, 4WD

Sway Bar End Links sold as a pair.

FRONT axle bump stops (‘08-‘23, 4500/5500, 2WD & 4WD)

$12.95

NOTE: A Borgeson Steering Shaft (BORG-000950 or BORG-000945 ) is recommended for the installation of this steering box.

REMAN Steering Box (‘94-‘02 4WD)

BORG-800112A: $449.00

The 800112 steering box offered for ‘94-‘02 trucks is a remanufactured unit.

Your truck’s original steering box was engineered in the 1960s, called a Series 700, and was made by Delphi. The replacement unit is also made by Delphi, but it was designed in the 2000s and it is called a Series 680. So what makes the Delphi Series 680 a better mousetrap?

• Modern internal valving provides a variable assist feel to the driver’s steering input. The further you turn the wheel the greater the assist. The benefits to you: the power assist is limited in the centered position to help the vehicle track straight on the highway.

• The Borgeson replacement steering box is a 16:1 ratio. The benefit to you: effectively 3.5 turns from lock-to-lock compared to 4.5 turns.

• Larger internal piston diameter (80mm) for greater power assist.

• Larger diameter bearings support the output/Pittman shaft.

• Frame spacers included.

If you use a Borgeson Replacement Steering Shaft (part numbers 000950 or 000945), the steering box installation is a simple bolt-inplace operation. The Borgeson box and shaft are a full-circle spline design.

To use the steering box with your truck’s existing steering shaft (a female, D-shaped spline design), the Borgeson input shaft adapter (male, O-shaped) will have to be cut-down with a grinding wheel.

High-Flow Power Steering Pump (‘94-‘02)

BORG-800328: $194.00

Second Generation truck owners take note: Are you looking for a power steering pump that gives better performance than the OEM unit at a lower price?

The Borgeson power steering pump is a direct replacement for ‘94-‘02 Dodge Turbo Diesel 2500 and 3500 trucks. Pump output pressure/flow is increased from 1,450 psi to 1,550 psi and from 3.5 gpm to 4.5 gpm.

Power Steering Hose Kits

1997-2002 Hydro-Boost Brakes BORG-925117: $104.50

1994-1996 Vacuum Brakes BORG-925116: $64.50

An OEM-style rubber hose kit for ‘94-‘02 Dodge ram trucks. If you are installing a new power steering pump, it is a good idea to replace the power steering hoses to avoid contamination of the new pump. Kits include pressure and return hoses and all clamps.

steering box braces.

NEW! NOT REBUILT!

Borgeson has sourced and adapted a brand new Delphi 684 series power steering box for the ‘03-‘20 Ram trucks. The Borgeson/Delphi 684 series “Dodge Box” offers the largest piston diameter for the most available power assist and a modern variable valve for stable highway driving. Steering gear features a 16:1 ratio for 3.5 turns lock-to-lock.

Fits all OEM and dropped pitman arms. Uses OEM pitman arm.

MAGNAFINE INLINE POWER STEERING FILTER

MF-3810000: $19.95

This filter provides dual filtration that helps protect and improve the performance of your power steering system. As the fluid passes through the filter a powerful internal magnet attracts all the damaging ferrous particles while the secondary filtration media removes the remaining non-ferrous materials down to 3 microns.

The filter installs inline on the return-to-pump line of the power steering system. It has an internal bypass if it becomes overrun past its service life of 10 to 30 thousand miles. It is recommended to protect and extend the life of the power steering system.

Steering Shafts

Depending on usage, the Dodge Ram steering coupler can show signs of wear in as little as 50,000 miles. This wear, which causes play in the truck’s steering, is even more noticeable if your truck is used for plowing, towing or if oversized tires have been installed. Replacing the worn steering shaft with another OEM shaft only gives you a temporary fix. Borgeson has replacement steering shaft assemblies with precision needle bearing u-joints available for ‘79-‘19 Dodge Ram trucks.

APPLICATION

BORG-000954: $336.00

Replacement Steering Shaft (‘14-‘19, 1500 2WD/4WD) BORG-000953: $336.00

Replacement Steering Shaft (‘03-‘12, 2500/3500 2WD & ‘03-‘13, 1500 2WD/4WD) BORG-000952: $336.00

Replacement Steering Shaft (‘03-‘08, 4WD)

Replacement Steering Shaft (‘95-‘02)

Replacement Steering Shaft (‘94)

Replacement Steering Shaft (‘79-‘93)

Steering column with removable Rag Joint Flange. Full-Size Dodge with 2 U-Joints

Replacement Steering Shaft (‘79-‘93)

Full-Size Dodge with fixed Rag Joint Flange

Replacement Rubber Rag Joint Disk (‘79-‘93)

BORG-000951: $282.00

BORG-000950: $282.00

BORG-000945: $282.00

BORG-000943: $246.50

BORG-000940: $196.50

BORG-000941: $17.50

This power steering pump includes the Magnafine filter MF-3810000.

When replacing the power steering pump, steering box or hoses, it is mandatory to flush the power steering system and to bleed the system. Failure to do so will result in damage to these parts and void the manufacturer warranty. Instructions on how to bleed the power steering system are included.

“BIG BORE xd” Steering Box –t-style linkage

PSC-SG851: $899.99

The second generation Dodge 2500/3500 4WD truck steering gears have always had failures to the lower sector shaft bearing and seals due to the single bearing design. PSC now offers a brand new extreme duty gear box replacement that offers a 45MM bearing and sector shaft to eliminate any side to side flex. The PSC Dodge XD steering gear features a 16:1 ratio for easier parking and 3.5 turns lock-to-lock along with a modern variable valve for stable highway driving and effortless maneuvering.

NOTE: Does not work with aftermarket steering box braces.

NOTE: Due to the increased overall size of the BIG BORE XD steering box, spacers are included in the kit to space the gear box off the frame. There is a 1” difference from the OEM steering gear. We suggest trimming the draglink and tie-rod at the pitman arm 1/2” to clear for alignment.

NOTE: Reuses OEM pitman arm.

NOTE: Does not work with Synergy Steering linkage on stock height trucks.

POWER STEERING line & FITTINGS

Power steering pressure and return line assemblies meet or exceed the OE assembly in fit, form, quality, and function.

Hose Assembly - Pump to Hydroboost ‘03-‘08, 2500/3500 SRW, 2WD & 4WD Hose assembly with vibration damper. GATES-352263: $55.95

$49.95

REPLACEMENT TRACK BAR BUSHINGS (‘94-‘12)

‘08-‘12 RP22442: $24.95 each ‘94-‘02 RMTB105: $18.33 each Works with RP2844 and RP28442G2. Fits like OEM. 2 required.

Luke’s Link Replacement Track bar Bushings

‘03-‘07 - RED BUSHINGS

LUKESLINK_BUSHINGKIT2: $42.00/pair

NOTE: Fits 2007 trucks built prior to 3/18/2007.

‘94-‘02 - BLACK BUSHING

LUKESLINK_BUSHING_IND: $18.00

(Only 1 bushing required.)

One of the weakest points on the ‘94-‘07 Ram 4WD truck suspension is the track bar and tie rod ends. Install these polyurethane bushings to tighten up the bar-to-frame connection.

Luke’s Link Track bar & Tie-Rod End Rebuild Kit (‘94-‘02, 4WD only)

INDIVIDUAL LUKESLINK_TBRKIT: $72.00

SET OF 4 LUKESLINK_TBRKIT: $249.95

Use Luke’s Link’s heavy-duty kit to rebuild ‘94-‘02 track bars and tie-rod ends to better than new. The installation of this kit should last the life of the truck. It is greaseable and adjustable if it ever comes loose.

Luke’s Link will also rebuild any of the four tie-rod ends. NOTE: Does not work on trucks with MOOG track bars. Will not fit over 2-1/16” diameter bar.

Direct bolt-on. No conversion brackets to install.

DIRECT REPLACEMENT ADJUSTABLE TRACK BAR (‘94-‘02)

RP28444G2: $276.64

Best Seller!

Rare Parts Inc manufactures this direct replacement, adjustable heavy-duty track bar for Dodge Ram trucks. Pregreased with synthetic lubricant. Cutaway shows design of track bar end.

TRACK BAR 4500/5500 (‘08-‘23)

68248930AA: $245.95

Power Steering End Fitting, Return

GATES-350230: $10.95

$33.95 ‘94-‘02, 2500/3500

Return Line Assembly, Gear to Pump

‘94-‘02

‘91-‘93

250/350

2WD & 4WD

‘89-‘90

250/350

11/32” Power Steering Return Line Hose ‘94-‘96 Return Line (Order 2ft.)

‘97-‘02 Return Line - Gear to Pump (Order 2ft.)

‘97-‘02 Return Line - Hydroboost to Pump (Order 2ft.)

Pressure Line Assembly - 2WD

Pressure Line Assembly - 2WD & 4WD

Return Line Assembly - 2WD & 4WD

GATES-362910: $23.95

GATES-363990: $28.95 Cut to fit. ‘94-‘96 Pressure Line Assembly

GATES-349960: $3.95 Sold per foot.

GATES-359970 $38.95

GATES-359970 $38.95

GATES-363540 $21.95

RAM 2500/3500 LINKAGE

Three #6505623AA linkage kit nuts included with this kit.

NOTE: Also fits ‘00-‘02, but may interfere with an aftermarket diff cover.

NOTE: For 2003 to 2008 model trucks. If replacing the steering linkage or drag link inner tie rod assembly at the pitman arm on a vehicle built before February 14, 2008, verify that the pitman arm part# is 68039930AA. If not, it must be replaced with our part 68039930AA. 2000 to 2002 model trucks will re-use the factory original pitman arm.

NOTE: Steering damper sold separately. ‘00-‘07 model trucks will need the ‘08-‘12 steering damper.

STEERING PITMAN ARM, (‘03-‘08, 2500/3500)

68039930AA: $99.95

Direct replacement part for a worn or bent center link. Eliminates loose steering and alignment issues related to a worn pitman arm.

‘03-‘07

‘94-‘02

Factory hardware is reused to install the bushings.

Rebuildable ball joint kits include:

Upper and lower ball joints, adjustable spanner wrench and allen wrench.

‘14-‘22, 2500 4WD

‘13-‘22, 3500 4WD

With radius arm

STANDARD

EMF-6821-7460S-KIT: $675.00

OVERSIZED

EMF-6821.1-7460S.1-K: $675.00

REBUILDABLE BALL JOINTS

Ball joint replacement: There aren’t many truck projects that are as unpleasant. It is a dirty, difficult and time consuming job.

The Turbo Diesel Register has covered the subject and the most recent article was in Issue 91, pages 16-18. The conclusion: Make your first ball joint replacement your last.

To accomplish that goal, you need a rebuildable ball joint. The folks at EMF (Evolution Machining and Fabrication) have developed “a better mousetrap.”

Here is the sales pitch: EMF is a small specialty shop. They make rebuildable Heim joints, rod ends, tie rods and ball joints. EMF has several U.S. and Canadian patents.

‘10-‘13, 2500 4WD

‘10-‘12, 3500 4WD

STANDARD

EMF-7467L-7460: $625.00

OVERSIZED

EMF-7467L-7460.1: $625.00

The EMF Ball Joint has a removable race and pin (part of their patent). Competitive products have a removable pin, however the inside of the housing will wear as the pin wears resulting in the inevitable replacement of the entire unit. By having the internal race and pin set on the EMF ball joint, the race will act as the wear point instead of the housing body creating a long lasting unit.

Over time, the ball joint pin and races will wear and when it gets to the point where the play can’t be removed by tightening it anymore – that’s when you rebuild it. You don’t have to remove the ball joint from the knuckle – you can rebuild them right on the truck.

They are also greaseable so you can just pump a couple squirts of grease into it around every oil change and go.

‘03-‘09, 2500/3500 4WD

STANDARD

EMF-7467-7460: $625.00

OVERSIZED

EMF-7467.1-7460.1: $625.00

‘00-‘02, 2500/3500 4WD

STANDARD

EMF-7397-7394: $625.00

OVERSIZED

EMF-7397.1-7394.1: $625.00

track bar BUSHINGS

‘13-‘22, 3500 4WD

‘14-‘22, 2500 4WD

EMF-BSHA-40082-18MM: $45.00 ea

2 required for each track bar.

INTERMEDIATE SHAFT BUSHINGS

‘03+, 1500/2500/3500/4500 2WD &4WD: EMF-DSB-3999: $19.95 pair

One of the steering problems we found on our Ram Turbo Diesel trucks is that the little bushing on the intermediate steering shaft can wear allowing movement within the shaft.

An inexpensive fix to this problem is a bushing that can be pressed into the collar.

This bushing is machined out of aluminum and has a tapered end to allow for ease of installation. The whole process takes about 5 minutes to install, is extremely inexpensive and works wonders for your steering column.

‘94-‘99, 2500/3500 4WD

EMF-80026-8607: $640.00

NOTE: Before ordering shaft bushings, please inspect the bushing housing on the end of the steering shaft. It should look like this photo.

Front End Control Arm Bushing Set, 4WD

‘03-‘09, 2500/3500

ES_53142G: $167.90

(To check proper fit, see website for dimensions.)

‘99-‘02, 2500/3500*

ES_53131G: $146.73

‘99-‘02, 2500/3500*

‘94-‘99, 2500/3500

ES_53120G: $144.37

*NOTE: ‘99-‘02 model trucks can use either 5.3131G or 5.3120G kits. It depends on the diameter of the bottom mounting bolt. If the bottom mounting bolt is 9/16” you will need 5.3120G. If the bolt is 5/8” you will need the 5.3131G kit.

NOTE: Does not include frame shackle bushings.

REAR Leaf Spring Bushing SetS

‘03-‘09, 2500/3500 4WD

ES_52118G: $145.81

3” wide rear spring with

1-11/16” ID main eye.

‘94-‘02, 2500 2WD

‘94-‘98, 2500 4WD

‘94-‘02, 3500 2WD

‘94-‘98, 3500 4WD

ES_52119G: $104.21

Ram 2500/3500 Air Bag Kit

2.5” wide rear spring with 2.5” ID main eye.

‘94-‘02, 2500/3500 2WD & 4WD

‘94-‘01, 1500 2WD & 4WD

ES_52109G: $90.34

Sway Bar

Frame Bushings

‘94-‘12 (34MM ) ES_55159G: $29.01**

‘94-‘12 (33MM ) ES_95186G: $33.72*

‘94-‘12 (32MM ) ES_55126G: $33.18

‘94-‘12 (30MM ) ES_55127G: $33.62

NOTE: Measure sway bar diameter before ordering. Bushings not available for all sizes.

**NOTE: Replacement metal brackets and washers not included with 34mm kit. You must re-use OEM brackets and washers.

*NOTE: End link bushings not included with 33mm kit. Sold separately.

Cab Mount Bushing Set

‘03-‘05, 2500/3500

2.5” wide rear spring with 1.75” ID main eye.

‘94-‘02, 2500/3500 2WD & 4WD

‘94-‘01, 1500 2WD & 4WD

ES_52111G: $77.73

RAM 2500/3500 Air Bag Kits

‘19-‘22, 3500 (2WD/4WD)

HP10368: $468.02

‘14-‘22, 2500 (2WD/4WD)

HP10206: $416.15

‘03-‘13, 2500 (4WD)

‘03-‘18, 3500 (4WD)

‘06-‘08, 1500/2500/3500 ( Mega Cab)

‘07.5-‘18, 3500 (2WD/4WD)

Cab & Chassis Requires HP10136 HP10002: $416.15

AXLE BREATHER RELOCATION KIT

‘07-‘09, RAM 3500 (Cab/Chassis) HP10136: $16.56

‘14-‘18, 3500 (2WD)

‘03-‘13, 2500/3500 (2WD) HP10089: $390.14

‘89-‘02, 2500/3500 (2WD/4WD) HP10019: $416.15

‘19-‘20, 1500 (4WD) ‘09-‘18, 1500 (4WD) ‘19, 1500 Classic (4WD) HP10336: $416.16

AIRBAG IN-CAB CONTROL KIT FOR AIRBAG KITS

Kit includes paddle switches, mechanical air pressure gauge, 12 VDC air compressor, wiring harness and install hardware. HP10098: $384.33

Sway Bar End Link Bushing

‘94-‘18, 2500/3500 ES_8084G: $1.50 Sold individually.

2WD & 4WD Regular Cab

ES_54116G: $302.91

‘03-‘05, 2500/3500

2WD & 4WD Quad Cab

ES_54115G: $402.35

‘94-‘02, 2WD & 4WD Regular Cab

ES_54107G: $147.89

‘94-‘02, 2WD & 4WD Quad or Extended Cab

ES_54109G: $193.69

Motor Mount REINFORCEMENTS

‘98.5-‘02, 24V

ES_51116G: $60.93

‘94-‘98, 12V

ES_51114G: $71.52

Motor mount inserts sold in Black only.

NOTE: These are not replacement bushings, just reinforcements.

Axle Bump Stops, 4WD ‘03-‘09, 2500/3500 ( FRONT )

ES_59105G: $40.89

Pacbrake’s air springs allow you to level out your truck’s stance for any towing/hauling situation. The product’s design gives you the ability to adjust the amount of air in each spring.

The standard manual fill kit gives you easily accessible fill valves located near the rear license plate on your truck.

It is important to note that by installing an air suspension kit, the max load capacity (GVWR) does not increase.

NOTE: Even though we have rarely seen this, some vehicles equipped with 5th wheel hitches require brackets to be mounted to the frame in the same locations as the air spring brackets (if this is the case, modifications of the 5th wheel hitch brackets may be required to mount this kit).

WIRELESS AIR SPRING CONTROLS

Apple iOS & Android HP10325: $621.42

Pacbrake Wireless Air Spring Controls give you the ability to adjust your air spring pressure from your phone with the touch of a button.

• Easy to use app reads real time pressure.

• Military grade solenoids designed to withstand extreme environments.

• Controller is waterproof and debris resistant.

• Accessible components offer ease of service and parts replacement.

• Pre-assembled plug-and-play harnesses for easy install.

• Includes air lines, pressure connectors and mounting hardware.

REAR

Attribute Programmer for E V 2 & Performax Programmer is used to activate a pre-installed warning light on EV2 gauges, and to adjust the point at which the light illuminates. Please see our website for details or call our Tech Line ISS-R82003: $36.95

*These gauges may require additional hardware depending on application. See pages 38-39 & 50 for hardware.

CS/CS2/CTS/ CTS2/CTS3

eas presssure sender 0-100psi

EDGE-98607: $177.95

BEST VALUE!

EAS EGT Kit (Daily Driver/ Tow Kit)

EDGE-98620: $160.95

This kit is ideal for the daily diesel driver or if you are towing then it’s a must have! Towing can put a lot of strain on the truck and make it run hot. Don’t be left on the side of the road with an overheated truck because you didn’t watch your EGTs.

(Includes EAS Starter Cable and EAS Temperature Probe.)

Works with CS2 or CTS3 to monitor data such as boost PSI, lift pump pressure, pre- and post-intercooler pressure and more.

eas temperature probe

EDGE-98608: $49.82

Use in conjuction with the CS2 or CTS3 monitor to view critical temperatures.

EDGE UNIVERSAL GAUGE MOUNT

EDGE-98004 $33.38

This adapter from EDGE allows you to mount the CS, CS2, CTS, CTS2, or CTS3 products in a 2-1/16” gauge pillar pod. The adapter’s state-of-the-art swivel system gives you the flexibility to adjsut the monitor to your own optimal viewing angle.

* If you are installing an AutoMeter electric fuel pressure gauge in your Ram Cummins truck, you MUST install this braided stainless steel line kit and #3279 fuel pressure snubber to prevent premature failure of the sending unit. Failure to do so will void the gauge warranty.

*The fuel pressure gauges may require additional hardware depending on application. See pages 38-39 & 50 for hardware.

Back-up Camera for CTS/CTS3

EDGE-98203: $237.95

The CTS3 line of products have a built-in video port that allows users to connect the Edge back-up camera.

The CTS3’s high-resolution, 4.3 inch color screen allows users to see what’s going on behind them with the Edge camera connected.

Features:

License plate mount • Adjustable Camera Angle •

Parking Guide Lines • Night Vision LEDs

• Waterproof

Quick and Easy Installation to connect to any Attitude

CTS, Evolution CTS2/CTS3 or Insight CTS2/CTS3 • Extended USB & RCA, Power and Ground Cables to make installation easier

**Monitor not included with purchase of camera.

CS2/cts2/CTS3 Dash Pod

‘06-‘09

‘03-‘05

‘98.5-‘02

Insight CTS3 & CS2

‘96-‘23, 2500/3500 EDGE CTS3

‘14-‘18, ECODIESEL EDGE CTS3 EDGE-84130-3: $462.95

The “Insight” Color Touch Screen 3 (CTS3) has a high-resolution, 5-inch screen to monitor the performance of your ‘96-‘23 OBD-II equipped truck.

‘96-‘20, 2500/3500 EDGE CS2 ‘14-‘18, ECODIESEL EDGE CS2 EDGE-84030: $364.95

NOTE: Limited data available on ‘96-‘07, 5.9L trucks.

The “Insight” CS2 has all of the same capabilities as the CTS3, but has a smaller 2.4-inch high-resolution screen with button-control.

At Geno’s we have used analog gauges in our Turbo Diesel trucks, but the concept of having multiple gauges that do not require fancy gauge mounts and a lot of underhood tinkering really appeals to us. The voice of experience screams out, “It can’t be any easier than plug-and-play using the OBD-II port.” And, plug-and-play we did. We love the CTS3 (and now the CS2) as it gives you up to eight data items that you can keep track of on the screen.

See our website for information about data and accessories. For more information about the operation of the Insight CTS3 and CS2 along with a complete listing of vehicle parameters, visit the EDGE Products website at: www.edgeproducts.com

EDGE-38505: $70.56

EDGE-38504: $64.00

EDGE-38503: $70.56

Put your EDGE on the dash of your truck in a dash pod that won’t warp or deform over time. Pod is angled for easy viewing.

Adapter kit included.

NOTE: The pod is molded in a charcoal/agate color. Can be painted to match the dash in your truck.

‘10-‘18 EDGE-38405: $116.95 ‘03-‘09 EDGE-38406: $116.95 If you want a color-matched A-Pillar mount, no competitor matches EDGE. Will not warp or deform.

‘03-‘09

CS2/cts2/CTS3 A-Pillar Mount

CTS3 ALUMINUM A-PILLAR GAUGE

Gauge Gizmo I

Single Pod ( Black only)

‘10-‘18 GM-DG-13117: $77.95

Some trimming of the base required.

‘03-‘09 GM-DG-15212: $39.95

‘98-‘02 GM-DG-15204: $37.95

‘94-‘97 GM-DG-15201: $36.95

‘86-‘93 GM-DG-15199: $37.95

Dual Pod ( Black only)

‘98-‘02 GM-DG-15203: $45.95

‘94-‘97 GM-DG-15200: $44.95

‘86-‘93 GM-DG-15198: $44.95

Full A-Pillar Triple and Dual Covers

TRIPLE FULL PILLAR I

‘10-‘22 (Color-Matched)

‘03-‘09 (Color-Matched)

‘98-‘02, w/tweeter (Black only)

‘98-‘02, w/o tweeter (Black only)

‘94-‘97 (Black only)

DOUBLE FULL PILLAR I

‘10-‘22 (Color-Matched)

‘03-‘09 (Color-Matched)

‘98-‘02, w/tweeter (Black only)

‘98-‘02, w/o tweeter (Black only)

‘94-‘97 (Black only)

GM-DG-17219: $99.95

GM-DG-17213: $99.95

GM-DG-17205: $88.95

GM-DG-1720 3 : $92.95

GM-DG-17201: $93.95

GM-DG-17218: $99.95

GM-DG-17212: $96.95

GM-DG-17204: $86.95

GM-DG-17202: $85.95

GM-DG-17200: $87.95

Gauge mounts for ‘03-‘09 trucks available in custom-colored molded plastic (not painted) for an exact match. ‘10-‘22 matches very closely, but not 100%. ‘94-‘02 model years come in molded black plastic that can be custom-painted to match the interior.

Single A-Pillar Replacement,

GM-DG-ZL39TL2: $70.95

‘03-‘09

When we found this MOPAR A-pillar with the molded-in single gauge pod (used in the SRT-10 Ram truck), we were impressed.

This A-pillar replacement is molded in the correct texture and color. Includes gauge pod, and the grab handle. It works perfectly with any standard 2” gauge.

NOTE: Reuse factory A-pillar screw hole covers. Not included with gauge mount. New covers available on page 64.

Steering Column

GAUGE Mounts I

These single or dual pod mounting pods are a custom way to mount gauges. The Gauge Gizmo puts your preferred gauge up high on the A-pillar of your truck. Gauge Gizmos come in molded black plastic and can be custom painted to match your truck’s interior.

Dash Pods I

TRIPLE GAUGE PODS

‘03-‘09

‘98-‘02

GM-DG-15020: $67.95

GM-DG-15002: $74.95

DUAL GAUGE POD

‘03-‘09

GM-DG-15019: $61.95

UNIVERSAL TRIPLE GAUGE POD

ALL GM-DG-5288: $112.95

In-Dash gauge Installation Back-Plates

‘99-‘02

GM-DG-01FACE9902: $7.50

Will not work in dash with trucks that have factory heated seats.

‘94-‘97

GM-DG-01FACE9497: $5.50 Will not work in dash with trucks that have overdrive.

For a custom in-dash look, we offer a black Lexan back-plate that fits into the cubby hole in the dash.

‘91- ‘02

DUAL Mount Steering Pod (‘10-‘18) GM-DG-15017: $50.95

SINGLE Mount Steering Pod (‘10-‘18) GM-DG-15015: $47.95

DUAL Mount Steering Pod (‘03-‘09) GM-DG-15014: $52.95

SINGLE Mount Steering Pod (‘03-‘09) GM-DG-15013: $47.95

SINGLE Mount Steering Pod (‘91-‘02) GM-DG-15012: $50.95 (Dual mount not available for ‘91-‘02.)

Gauge mounts available in Black only.

AutoMeter single and a dual steering column pods put the gauges right in front of you in an easy to see location. These gauge mounts are a cover and attach to the existing steering column cover.

Molded in black plastic, they can be painted to match your truck’s interior. Receives most standard 2” gauges.

You can find additional gauge pods for your Ram truck on our website.

The gauge mount plug covers the opening of unused holes in gauge mounts.

Acu Temp Adapter (‘89-‘23,

5.9L & 6.7L) I

ACUTEMP_ADAPTER: $35.00

The Acu Temp Adapter allows you to install any 1/8 NPT temperature sender on your cooler line. It takes less than five minutes to install over the cooler line. You never have to touch the transmission fluid, so you have no concern over fluid contamination.

NOTE: Experience has shown that the temperature readings using this adapter are 30° cooler than temperatures in the pan.

Boost Adapter (‘98.5-‘23)

RLT_ADAPTER: $7.50 I

Works with 5.9L & 6.7L engines.

Access the pressurized intake air system with this adapter for use with a boost gauge. Remove an intake manifold bolt, replace it with our Boost Adapter that has a hole in it, and you now have access to pressurized air.

‘10 - ‘18

‘03- ‘09

‘9 4 - ‘97

‘99 - ‘02

2” Gauge Mount Plug GM-PLUG: $3.00/each

These gauge pods mount on top of the dash almost flush against the windshield for a nice, non-obtrusive view. The dash pod is molded in black plastic, but can be painted to match your truck’s interior color.

RAM 2500/3500 Battery CABLE KITS

After having many requests for replacement battery cables (typically Mopar cost are over $400 a set), one of our customers suggested we call Vince at CustomBatteryCables.com.

We called Vince.

The short version of the story, Vince builds a great product. So much so that his custom cables could takes days before they could be shipped.

To eliminate the hassle of one at a time, Vince built us a quantity of cable sets. We stock them, he doesn’t have to answer the phone.

His quality is unsurpassed. Vince has been making cables for heavy equipment and trucks for over 20 years. These Ram replacement cable kits are built from 2/0 (“two-aught”) cable for the starter and engine block grounds. After he crimps the heavy-duty copper terminals with a 12-ton hydraulic crimper, he seals the connection with adhesive lined heat shrink which helps prevent battery acid and acid fumes from corroding the cables. Cables are shipped with split loom, nuts and bolts with anti-corrosion plating and connectors and heat shrink to complete the splice. Battery terminals and covers are also included.

Here are the part numbers that you’ll need.

‘07.5-‘09, 6.7L*

BAT-DDG35KIT: $358.95

‘03-‘07, 5.9L*

BAT-DDG3KIT: $339.95

‘98.5-‘02, 24V * BAT-DDG25KIT: $349.95

‘94-‘98, 12V * BAT-DDG2KIT: $309.95

‘89-‘93, SINGLE BATTERY BAT-DDG1KIT: $139.95

Throttle Sensitivity Booster

VERSION 3

‘07-‘23, 5.9L & 6.7L 2500/3500/4500/5500

Manual/Automatic Transmission

‘14-‘19, Ram 1500 EcoDiesel Automatic Transmission (2019 Ram 1500 Classic only.)

BD-1057932: $278.95

‘05-‘06, 5.9L

Manual & Automatic Transmission

BD-1057931: $278.95

VERSION 1

‘98.5-‘02, 24V Manual Transmission only.

BD-1057730: $269.95

The BD Throttle Sensitivity Booster provides instant throttle response and reduced pedal lag for your Ram Turbo Diesel truck.

You get adjustable sensitivity levels of +50% and +100% Modes. An optional dash switch is available that gives you multiple setting options compared to only two with the standard module.

SourcePWR SMART IGNITION POWER MODULE

ROSTRA_250_2951: $29.95

Before the days of your truck having a module-for-this and a module-for-that, an owner would simply tie into an ignition “On” power source and power a relay to add additional circuits.

ALTERNATOR AND GRID HEATER CABLES

18” - 4 Gauge Cable With fusible link for stock alternator.

18” - 2 Gauge Cable With fusible link for 180 amp and above alternators.

Alternator Terminal Cover

Grid Heater Relay Wires - With fusible link and single 6 gauge relay wire. 14.5” long.

Grid Heater Relay Wires - 8 gauge dual relay wires. Wires different length. 11.5” battery to relay and 16” battery to relay.

Grid Heater Relay Wires - 8 gauge dual relay wires. Wires are the same length. 16” to battery.

Relay to Grid Heater Wires - 2 long wires wrapped in loom, 1 short wire wrapped in loom, 4 terminal covers.

Battery Terminals

POSITIVE Post (Red) UBT-840P: $14.99

NEGATIVE Post (Black) UBT-840N: $14.99

Various Years BAT-893: $41.95

Various Years BAT-895: $41.95

Various Years BAT-1971: $5.00

Various Years BAT-891: $32.95

Various Years BAT-4467: $45.95

Various Years BAT-14259: $46.95

‘03-‘05 5.9L BAT-37529: $84.75

With the Rostra SourcePWR you no longer have to poke and prod for the ignition on signal. The SourcePWR goes directly to the battery and it is triggered on and off (a smart logic circuit) by the voltage drop when you engage the starter. The SourcePWR can then be used to add a 7.5amp circuit to your truck.

Geno’s Garage OBDII

Port lock & tune saver (‘96-‘23)

GG-TUNESVR $50.95

This tune saver is designed to keep unauthorized persons from accessing your truck’s computer through its OBDII port. It prevents such things as changing programming, changing performance parameters or accessing vehicle specific data such as key codes. Includes one secure key. Additional keys available on page 73.

OBDII SPLITTER CABLE ASSEMBLY

AM-5323: $39.95

This low profile Auto Meter OBD-II signal splitter / pass through allows for remote location of connections for DashLink instrumentation while providing an additional easy to access connection point for other onboard devices requiring access to the OBD-II data stream.

If the original battery terminals in your Ram truck are broken or corroded, replace them with these heavy-duty battery terminals. They clean up the engine bay nicely.

3 Circuit Top Tap Connector

3CIRCUIT_TOP_TAP: $1.99

Provides easy access to power for all of your truck accessories.

MICRO FUSE KIT (‘13-’22, 1500/2500/3500)

GG-FUSEMICRO: $22.95

Try finding these micro fuses at any outlet other than a Ram dealer. Good luck. We heard you loud and clear. Here is our micro fuse kit for newer Ram trucks.

AFTERMARKET

Replacement

Dashboard (‘98-‘02, 3500/2500/1500)

‘9 8 -‘02, 3500/2500 & ‘9 8 -‘01, 1500

DRD8-2: $259.95

($50 flat shipping fee to continental U.S.)

BEST SELLER!

Dash available in Black only. Can be custom-painted to match truck interior color. See page 53.

Lifetime warranty from manufacturer defects. Made in the USA.

This is a full replacement dashboard. This is not a cover. It is made with a heavy-duty ABS plastic that is designed to help keep the sun from making it crack like the original dashboard. This Dodge Ram dash is more durable than the OEM part. The dash cover is only available in black and we recommend that you paint it to match the interior color in your truck.

The ‘98-‘02 dashboard is made for us to our specifications and are typically in stock here at our warehouse.

The dashboards may require some light trimming to fit. It is not a job for a novice, but is one that goes hand-in-hand with a heater core/ evaporator replacement. See Evaporator and service kits on page 62. Please call before ordering this replacement dash if you have installation questions.

Replacement DashboardS (‘94-‘05, 2500/3500)

‘94-‘97

SLATE GRAY ( DV ) DRD3-MOP-FRONT-SL: $350.00

TAUPE ( L5 ) DRD3-MOP-FRONT-TP: $350.00

$40 shipping fee on ‘02-‘05 upper front dashtops.

UPPER FRONT AND REAR DASHTOP

SLATE GRAY ( DV ) DRD3-MOP-SL-KIT: $930.00

TAUPE ( L5 ) DRD3-MOP-TP-KIT: $940.00

$60 shipping fee on ‘02-‘05 dashboard kits.

‘98-‘02, 2500/3500 DASHBOARDS

Also fits ‘98-‘01, 1500.

AGATE ( LAZ ) DRD8-MOP-AGATE: $460.00

LIGHT MIST GRAY ( RC8) DRD8-MOP-MGREY: $ 460.00

$50 shipping fee on ‘98-‘02 dashboards.

Available in Black only. Can be custom-painted to match truck interior color. See page 53.

‘94-‘97, 1500/2500/3500 DASHBOARD

SLATE GRAY ( DV ) DRD4-7-MOP: $335.00

$50 shipping fee on ‘94-97 dashboards.

NOTE: The dashboards may require some light trimming to fit. It is not a job for a novice, but is one that goes hand-in-hand with a heater core replacement or service. See pages 62-64 for Evaporators, Heater Cores and Service Kits.

Please call before ordering a replacement dash if you have installation questions.

Rigid Plastic Dashtop Cover (‘94-‘05, 3500/2500/1500)

‘03-‘05, 2500/3500 ‘9 8 -‘02, 2500/3500 ‘9 4 -‘97, 2500/1500 ‘02-‘05, 1500 ‘9 8 -‘01, 1500

DASHTOP-999: $189.00 DASHTOP-998: $189.00

DASHTOP-997: $189.00

From time to time, we get calls from truck owners looking for an affordable, high-quality dash replacement or cover to hide those unsightly cracks that inevitably occur in extreme weather conditions. When Palco Industries, Inc. approached us with their new line of DashTop dash covers for ‘94-‘05 Dodge Ram trucks, we ordered one and installed it on one of our trucks. We were pleased to find that the installation was easy, the fit was good, and the cost was reasonable. Silicone adhesive is included.

 Additional shipping charges apply to dashtop systems shipping to Alaska and Hawaii.

UPPER FRONT

(‘03-‘05) ‘03-‘05, 2500/3500 & ‘02-‘05, 1500

SLATE GRAY ONLY. DRM926121: $138.95

$40 flat shipping fee applies for dashboard panel.

This replacement dash cover matches the fit and finish of the original part, restoring a like-new appearance to your truck’s dashboard. Can be painted to match different interior color.

*Oversize shipping rates apply to replacement dashboards.

‘03-‘05

H TDR82, p14-19: Replacing Your Cracked Dash, ‘98.5-‘02

‘03-‘05

‘98-‘02

‘94-‘97

Dashboard PANEL

MOPAR Instrument Cluster Bezel

‘99-‘02, 2500/3500 & ‘99-‘01, 1500

68042746AC : $279.00

This OEM instrument cluster bezel replaces your broken cover perfectly.

NOTE: New mounting clips #06504067 on page 53 or re-use the original clips.

Instrument Cluster Bezel

‘99-‘02, 2500/3500 & ‘99-‘01, 1500

DRM926469: $89.95

This lower cost instrument cluster bezel replaces the OEM cover perfectly.

NOTE: 13 mounting clips included.

Instrument Cluster Bezel

Mounting Clip (‘98-‘02) 13 clips required.

06504067: $2.75 each

Instrument Cluster Bezel

RETAINER KIT (‘98-‘02)

Includes 13 clips.

DRM926287: $15.95

Instrument Cluster Air Outlets, ‘98-‘02 LEFT 5014842: $49.95

CENTER - LEFT 5014841: $50.95

CENTER - RIGHT 5014840: $51.95

TEMPERATURE Control Knob ASSORTMENT (‘94-‘97)

DRM76829: $11.95

Dashboard Reinforcement

Tabs (‘94-‘02)

‘98-‘02, 2500/3500 ‘94-‘97, 2500/3500

‘98-‘01, 1500 GG-DRK9497: $12.95

GG-DRK9802: $12.95

Modern dashboards are made from plastic which becomes brittle and fatigued over time. Decrease dash rattles and increase structural rigidity with these reinforcement tabs. Reinforcement tabs only work with OEM dash.

rattle & squeak eliminator kit

The Geno’s Garage

Replacement Dash Panel Plastic Snap-in Nut (‘94-‘09)

4 required per dash.

06504485: $9.95 each

Rattle & Squeak Eliminator Kit is made up of a 1/2” x 24” piece of adhesive backed felt. Manufacturers use the material to perform the same task.

Includes 24” of felt and (2) alcohol prep pads.

GG-RSEK: $5.95 each

WINDSHIELD SUNSHADE

‘19-‘23, 2500/3500 with large 10” wide sensor attached to rearview mirror.

CI-11685: $81.99

‘10-‘18, 2500/3500

‘09-‘18, Ram 1500 ‘19, Ram 1500 Classic

CI-11150: $81.99

‘19-‘23, 2500/3500 with standard rearview mirror.

CI-11687: $81.99

‘03-‘09, 2500/3500

CI-10804: $81.99

‘19-‘23, 2500/3500 with small 5” wide sensor attached to rearview mirror.

CI-11686: $81.99

‘94-‘02, 2500/3500

CI-10558: $81.99

Heat Shield Storage Bag - Universal Kit: ZUBAGV6: $11.99.

Keep the interior of your truck cooler and protect the dash from harsh UV rays with a UVS heat shield by Covercraft.

The outward-facing surface is high-quality silver reflective fabric; the inside is soft pellon felt. Both fabrics are laminated to a stiff foam board which acts as an insulator to reduce heat build-up.

The laminated stiff board is what makes this item perfect for longer term, RV-type parking. For short trips, the board’s accordion-like folds make removal/installation easy.

2020-2022 Ram 1500 sunshades available online.

PLASTICS PAINT & PREP

ColorBond Leather, Vinyl and Hard Plastic Refinisher are perfect for painting your ‘98-‘02 Ram truck’s interior part to match the original. They go on easy, offer great coverage and dry fast. If applied properly, it will not flake, crack or peel and will provide years of protection with no special care needed.

For professional long lasting results, we recommend that after roughing the entire surface with a ScothBrite pad, ColorBond’s Prep Cleaner is perfect for wiping away dust, oil and grease contaminants, giving you a perfect foundation for success.

Next, we have ColorBond Adhesion Promoter which strengthens the bond between the paint and plastic which provides the greatest durability to the finish. After prepping with cleaner, simply shake well, apply a nice even coat, allow to dry for 10 minutes and then apply your color.

INTERIOR PAINT

CHRYSLER AGATE, ‘98-‘02

CB-1001-163: $19.95

CHRYSLER DARK MIST GRAY, ‘98-‘02 CB-1001-166: $19.95

INTERIOR & EXTERIOR PAINT

SKID MARK BLACK (Satin Black ) CB-1003-144: $19.95

PREPARATION

PREP CLEANER CB-1006-09: $9.95

ADHESION PROMOTER CB-1007-215: $18.95

PAINT REFINISH KITS

Kits include: (1) Can 12oz. paint, (1) Bottle 4oz. Prep Cleaner, (1) Can 12oz. Adhesion Promoter, (1) ScotchBrite Pad

CHRYSLER AGATE KIT CM-KIT-163: $46.50

CHRYSLER DARK MIST GRAY KIT CM-KIT-166: $46.50

SKID MARK BLACK KIT CM-KIT-144: $46.50

Included with DRD8-2 dash at no extra charge.

Cannot ship to Alaska or Hawaii. No Air or Expedited shipping. Ground service only.

Dash MATS

Looking for a dash cover to protect your dashboard from the summer heat? Whether it is an ULTIMAT Dash Mat or a DASHMAT Carpet Dash Mat , this is the answer to the hot sun. The texture of the dash cover allows you to store items on top of the dash and not worry about them rolling around.

Your choice of colors:

Wheelskins

All Colors/Years: $49.95

Wheelskins Genuine Leather Steering Wheel Covers are some of the finest wheel covers you’ll find anywhere. They are hand-crafted in California from choice domestic cowhide and their exclusive patented lacing hole reinforcement design ensures a tight custom fit. They are easy to install and are a perfect fit on your Ram’s steering wheel.

APPLICATIONS

‘12-‘18*

BLACK WSS01-01

GRAY WSS01-14

SAND WSS01-18

BLACK WS102C-01

‘05-‘11

GRAY WS102C-14

SAND WS102C-18

BLACK WS102XX-01

‘98-‘04

The ULTIMAT DASH COVER is a semi-rigid carpet cover molded to the exact shape of the dashboard, resulting in a perfect fitting cover.

ULTIMAT Dash Covers: $78.99

Specify Black or Gray when ordering.

ULTIMAT Dash Cover

‘10-‘18

Fits 2019 1500 Classic Black, Gray ULT9184000

‘10-‘18

w/Alpine speakers Black, Gray ULT9184001

‘06-‘09 Black, Gray ULT9170100

‘03-‘05 Black, Gray ULT9154100

‘98-‘02 Black, Gray ULT9088600

‘94-‘97 Black, Gray ULT9053100

‘81-‘93 Black, Gray ULT9055600

We tried all four colors of the UltiMat and DashMat. We strongly suggest the black dash cover as it does not glare into the windshield.

‘89-‘97

Accessory/CB Mount (‘94-‘09)

‘03-‘09

WD_CB_0309: $56.95

‘94-‘02 WD_CB1: $56.95

The mounting bracket uses the existing center seat bolts to hold it in place. The mounting surface for an accessory is 13” wide by 4.5” tall.

To attach your accessories/CB, you drill holes through the mount to correspond with the attachment points of your accessory/CB.

The DASHMAT DASH COVER is a flexible poly-carpet, stitched cover that is cut to follow the contour of the dash.

DASHMAT Dash Cover: $49.99

Specify Black, Caramel, Beige, Smoke or Gray when ordering.

DASHMAT Dash Cover

‘19-‘23, 2500/3500 Black, Caramel, Smoke DM226500

‘10-‘18

Fits ‘19 Ram 1500 Classic Black, Gray DM184000

‘06-‘09 Black, Gray DM170100

‘03-‘05 Black, Gray DM154100

‘98-‘02 Black, Beige, Gray DM088600

‘94-‘97 Black, Beige, Gray DM053100

‘81-‘93 Black, Beige, Gray DM055600

NOTE: ‘10-‘23 DashMat doesn’t have speaker cutouts for Alpine stereo system.

This mount allows the use of the dash mounted cup holder and has clearance for the 4WD lever. The CB face, in most cases, will be flush with the vinyl/cloth line at the seat front. The bracket is painted satin black for rust protection.

NOTE: Fits ‘06-‘09 with 40/20/40 seats only.

NOTE: May not work with large CBs in trucks equipped with a manual transmission. Check for clearance.

GRAY WS102XX-14

SAND WS102XX-18

BLACK WS102X-01

GRAY WS102X-14

SAND WS102X-18

NOTE: In ‘03-‘09 trucks, the mount may interfere with the lower seat compartment handle.

‘94-‘02

‘03-‘09

Black Beige Caramel Smoke Gray

Elbow Friend

STANDARD SIZE (8.5”L x 3W” ) JUMB0 SIZE (10”L x 3W” )

ELBOWFRIEND-STD: $21.99/pair ELBOWFRIEND-JMB: $29.99/pair

Here is the problem: you have a truck with the same ‘ole hard plastic door panel and it’s uncomfortable as an arm rest.

Here is the quick, easy and affordable answer: Elbow Friend. It is a comfortable pillow covered with durable fabric. We found the standard size to work well for most people, but a jumbo size is available too.

SHIFT KNOB & PARTS

SHIFT KNOB, ‘89-‘18

52104174: $32.95

RETAINING NUT 6502556: $6.95

6-SPD INSERT - G56, ‘05-‘18

55366060AB: $6.95

BILLET ALUMINUM SHIFT KNOB INSERT - NV5600 SHIFTERS

5-SPD INSERT - NV4500, ‘89-‘04

4446921: $6.95

Custom ‘CUMMINS’ Shift Knobs (‘89-‘18)

Any of these custom CUMMINS shift knobs will do an outstanding job of dressing up your truck’s interior. They fit both the transmission and/or the transfer case shifter. The shift knobs measure 2” round (the approximate size of a cue ball), a comfortable size for your hand. Threaded insert is M10 x 1.5mm.

‘CUMMINS C’

SHIFT_C_RED: $49.95

SHIFT_C_BLACK: $49.95

SHIFT_C_SILVER: $49.95

‘Cummins C Power’

SHIFT_KN_R (RED): $49.95

SHIFT_KN_S (SILVER): $49.95

SHIFT_KN_B (BLACK): $49.95

‘CUMMINS Dependable DIESEL’

SHIFT_RETRO1_RED: $49.95

SHIFT_RETRO2_BLACK: $49.95

SHIFT_RETRO3_SILVER: $49.95

CENTER CONSOLE LID KIT (‘03-‘05)

GRAY DRM924876: $263.95

TAUPE DRM924877: $199.95

Restore functionality of your Dodge Ram’s center console lid with a Center Console Kit. Includes all the materials and hardware needed to complete the repair.

Replacement

A-Pillars (‘03-‘09)

DRIVER SIDE

MOP-1TE75BD1AA: $64.95

PASSENGER SIDE $64.95

A-pillar with this replacement. It is color-matched and does not require painting.

Replacement

A-PillarS (‘03-‘09)

DRIVER SIDE

DRM97631: $53.95

PASSENGER SIDE

DRM97630: $49.95

Easy to install and durable, offering an exact fit that matches the original handle.

Replacement A-pillars have reinforced mounting holes. Will not work with IMCO repair kits.

A-Pillar Grab Handle Repair Kit, (‘03-‘09)

DRIVER AND PASSENGER SIDE

IMCO_RPR_KIT: $46.00

DRIVER SIDE ONLY

IMCO_RPR_SINGLE: $25.00

The OEM A-pillar grab handle in ‘03-‘09 Ram trucks is a known weak spot in the interior. Put too much weight on it and the mounting points will break.

This Grab Handle Repair Kit has aluminum bushings that reinforce the mounting points to help prevent the grab handle from breaking or to repair one that is already broken.

NOTE: This repair kit will only work if the mounting base is split or if the base is completely broken off of the A-pillar.

NOTE: Will not work with new replacement A-pillars.

‘98-‘05 GG-NV5600SI: $14.95

FRONT SEAT STYLE /YEAR COLOR/PART# PRICE

Laramie/Sport (‘14-‘18)

Bucket seats with adjustable headrests and seat air bags. This seat configuration has a big factory console between the seats.

All Cabs (‘13-‘16)

40/20/40 seats with adjustable headrests, fold-down console w/3 cupholders & lid, seat airbag and without center storage.

All Cabs (‘13-‘16)

40/20/40 seats with adjustable headrests, fold-down console w/3 cupholders & lid, seat airbag and with center storage.

Reg/Mega/Crew/Quad (‘11-‘16)

1500/2500/3500

Bucket seat with adjustable headrests with seat airbag. Does not fit Laramie or Sport

Laramie (‘12-‘13)

Bucket seats with adjustable headrests. This configuration has a big factory console between the seats.

Mega/Crew/Quad/Reg (‘11-‘16)

40/20/40 w/adjustable headrests, seat airbag, fold-down console (covered), without center seat storage.

Mega/Crew/Quad/Reg (‘11-‘12)

40/20/40 w/adjustable headrests, seat airbag, center seat storage, fold-down console (covered), with or without center seat storage, and built-in storage tray

Mega/Crew/Reg (‘10-‘12)

40/20/40 w/adjustable headrests, center seat storage and fold-down console (covered).

Mega/Crew/Reg (‘10-‘12)

40/20/40 w/adjustable headrests and fold-down console. This design doesn’t accommodate consoles with storage under the seat area.

ST & SLT (‘10-‘12)

Mega/Crew/Quad/Reg

Bucket seats with adjustable headrests. Does not fit Laramie or Sport

Laramie/Sport (‘10-‘12)

40/20/40 seats with adjustable headrests and covered center seat storage.

Laramie/Sport (‘10-‘11)

Bucket seats with adjustable headrests. This seat configuration has a big factory console between the seats.

Mega/Quad/Reg (‘09-‘14)

40/20/40 seats with adjustable headrests and fold down console (covered).

Mega/Quad/Reg (‘06-‘09)

40/20/40 seats with adjustable headrests and fold down console (covered).

Mega/Quad/Reg (‘06-‘09)

Bucket seats with adjustable headrests.

Quad Cab/Reg (‘04.5-‘05)

40/20/40 seats with adjustable headrests, with opening for lumbar dial and fold-down console (covered).

Brown SS-2476CA-BN

Gravel SS-2476CA-GY

Brown SS-3435CA-BN

Gravel SS-3435CA-GY

Brown SS-3438CA-BN

Gravel SS-3438CA-GY

Brown SS-2459CA-BN

Gravel SS-2459CA-GY

Brown SS-2450CA-BN

Gravel SS-2450CA-GY

Brown SS-3430CA-BN

Gravel SS-3430CA-GY

Brown SS-3429CA-BN

Gravel SS-3429CA-GY

Brown SS-3410CA-BN

Gravel SS-3410CA-GY

Brown SS-3405CA-BN

Gravel SS-3405CA-GY

Brown SS-2430CA-BN

Gravel SS-2430CA-GY

Brown SS-3413CA-BN

Gravel SS-3413CA-GY

Brown SS-2405CA-BN

Gravel SS-2405CA-GY

Brown SS-3445CA-BN

Gravel SS-3445A-GY

Brown SS-3372CA-BN

Gravel SS-3372CA-GY

Brown SS-2398CA-BN

Gravel SS-2398CA-GY

Brown SS-3358CA-BN

Gravel SS-3358CA-GY

$292.99

Quad Cab/Reg (‘03-‘04)

40/20/40 seats with adjustable headrests, without opening for lumbar dial and fold-down console (covered).

$356.99

$356.99

$292.99

$292.99

$356.99

$356.99

$356.99

$356.99

REAR SEAT STYLE /YEAR COLOR/PART# PRICE

Crew/Quad Cab (‘11-‘22)

60/40 split seats with 3 adjustable headrests with fold-down armrest.

Crew/Quad Cab (‘11-‘22)

$292.99

$356.99

$292.99

$356.99

$356.99

$292.99

$356.99

Brown SS-3344CA-BN

Gravel SS-3344CA-GY

$356.99

60/40 split seats with 3 adjustable headrests (2 large, 1 small) without fold-down armrest.

Crew Cab/Quad Cab (‘11-‘22)

2500/3500

Full bench seat w/3 adj. headrests and center shoulder belt.

Crew Cab (‘10)

2500/3500

60/40 split seats w/3 adj. headrests & fold-down cup holder.

Mega Cab 60/40 (‘06-‘07 & ‘10-‘22) 60/40 with adjustable headrest.

Quad Cab 60/40 (‘04-‘08) 60/40 with adjustable headrest.

Quad Cab Full Bench (‘04-‘09) Full bench with adjustable headrests.

Quad Cab Full Bench (‘03) Seats without headrests.

Quad Cab 60/40 (‘03) Seats without headrest.

Brown SS-8396CA-BN

Gravel SS-8396CA-GY

Brown SS-8397CA-BN

Gravel SS-8397CA-GY

Brown SS-7432CA-BN

Gravel SS-7432CA-GY

Brown SS-8385CA-BN

Gravel SS-8385CA-GY

Brown SS-8363CA-BN

Gravel SS-8363CA-GY

Brown SS-7366CA-BN

Gravel SS-7366CA-GY

Brown SS-7361A-BN

Gravel SS-7361CA-GY

Brown SS-6348CA-BN

Gravel SS-6348CA-GY

Brown SS-8483CA-BN

Gravel SS-8483CA-GY

$369.99

$369.99

$287.99

$369.99

$369.99

$287.99

$287.99

$203.99

$369.99

Ram 1500 Covercraft Seat Covers available online.

‘13-‘23

Center Console Cupholders I

‘13-‘23 CUP-HOLDER-DBL: $49.95

Automatic transmission only.

‘03-‘12 CUP-HOLDER-03: $49.95 (Does not fit trucks with Captain’s chairs and the big factory center console.)

‘98-‘02

CUP-HOLDER-9802: $49.95

‘94-‘97 CUP-HOLDER-9497: $49.95

Increase the storage capacity of the center console and help avoid messy liquid spills in the interior of your truck with our handy cup holder. Installs in minutes to the existing console.

The Cupholder is form fitted to the inside diameters of the console and is designed so that it does not interfere with shifting in manual transmission trucks.

Cup wells are 4” deep. Upper diameter: 3-3/4”. Lower diameter: 2-3/4”. The cup wells have a slot for a coffee mug handle.

Use a single self-tapping screw or velcro (included with the cup holder) to install the cup holder. The Cupholder attaches to the inside of the console. Some minor adjustments might be necessary to the console to get the lid to close properly.

Installation instructions are included.

Door Pocket Drink Holder (‘09-‘23)

DRIVER SIDE - ‘10-‘23 2500/3500, ‘09-‘18 1500, ‘19-‘23 1500 Classic

1LD23XXX-AA: $43.95

PASSENGER SIDE - ‘10-‘23 2500/3500, ‘09-‘18 1500, ‘19-‘23 1500 Classic

5NN24XXX-AA: $17.95

DRIVER SIDE - ‘19-‘23, 1500

Does not fit 1500 Classic 5YK47TX7AC: $17.50

PASSENGER SIDE - ‘19-‘23, 1500 Does not fit 1500 Classic 5YK46TX7AC: $20.75

Does your truck have this spiffy foam rubber insert in the truck’s sidedoor pocket? If it doesn’t,get this one by Mopar to hold your things.

Cup Holder (‘98-‘02)

MIST GRAY 5FR421C8AE: $172.95

Replacement cup holder for Ram 2500/3500 trucks with an automatic transmission. Color code RC3.

REPLACEMENT SEAT MOTORS AND GEARS

$51.00 ‘94-‘97, 1500/2500/3500

Forward/Backward Adjustment Must reuse factory tube nut, gear shims and thrust washers. SEAT-DOD13: $115.00

Up/Down Adjustment

Must reuse factory tube nut, gear shims and thrust washers.

SEAT-DOD5GS: $59.00

‘Double Cup’ Cupholder

This cupholder will only work with the console pictured!

‘13-‘23 Automatic

‘03-‘12

‘98-‘02

‘94-‘97

• Upgraded DuroFoam more durable than OEM.

• Reinforcement on bottom of the cushion where seat meets springs.

REPLACEMENT DUROFOAM Seat Cushions (‘94-‘19) I

We introduced a driver’s side seat cushion for the ‘98-‘02 Dodge Ram trucks. Because of the Quad Cab/suicide rear door design of the truck, this cushion was infamous for its “left side lean.”

With the availability of the ‘98-‘02 cushion, we had an outcry from other Turbo Diesel owners that discovered the Mopar cushion for their truck(s) had also been discontinued. We now have cushions from ‘94 all the way through the ‘19 trucks

All of our seat cushions have upgraded DuroFoam which lasts longer than OEM. They are reinforced on the left side and underneath on the set base where the foam meets the spring. Installation instructions included.

DRIVER SIDE

Driver Side

‘10-‘19, 2500/3500 Cloth

BOTTOM Seat Cushions (‘94-‘19) I

DRIVER SIDE 2500/3500

CLOTH SEATS

‘10-‘19 MOP-68050461: $185.00 (also ‘09-’18, 1500)

LEATHER SEATS

‘10-‘18 MOP-68064271: $379.95

‘06-‘09 Not available.

‘04-‘05 MOP-5140697: $189.00

DRIVER SIDE 1500

40/20/40 CLOTH & VINYL SEATS

‘09-‘18 MOP-68050461: $185.00

‘06-‘08 MOP-5178109AA: $120.00 *

40/20/40 BUCKET LEATHER SEATS

‘10-‘18 MOP-68064271: $379.95

‘06-‘08 5180027AA: $179.95

PASSENGER SIDE 2500/3500

CLOTH SEATS

‘10-‘19 MOP-68050462: $199.00

‘06-‘09 MOP-5180020: $180.00

‘04-‘05 MOP-5127750: $199.00

‘03 MOP-5093780: $126.95

LEATHER SEATS

‘10-‘18 MOP-68064270: $399.95

‘06-‘09 Not available.

‘03 MOP-5093780: $126.95

PASSENGER SIDE 1500

CLOTH SEATS

‘09-‘18 MOP-68050462: $199.00

LEATHER SEATS

‘10-‘18 MOP-68064270: $399.95

‘04-‘05 MOP-5127750: $199.00

‘02-‘03 MOP-5093780: $126.95

NOTE: Does not fit Mega Cab trucks.

Seat Heater Kit by Rostra

ROSTRA-250-1870: $58.00 (each)

What do you do if you did not order the factoryinstalled, heated seats in your Dodge truck? The answer is a Rostra Controls seat heater kit. The heat elements warm up quickly and the twoposition switch allows for High/Low operation. Position of the heater elements requires removal of the seat covers. Install the heaters in the conventional manner (bottom and back) or stack the heating elements for a back-only heat.

NOTE: This kit is not a replacement for OEM seat heaters.

OEM-Style driver side Seatback Covers

‘10-‘19

GG-SC1017: $139.00

Cloth, Vinyl & Leather Non-ventilated ‘09-‘19, 2500/3500 & ‘09-‘18, 1500

‘10-‘18

GG-SCV1014: $139.00

Leather & Ventilated

‘09-‘19, 2500/3500 & ‘09-‘18, 1500

‘06-‘09

GG-SC0609CL: $139.00

Cloth, Vinyl & Leather ‘06-‘08, 1500 Mega Cab

‘06-‘09

GG-SC0609P: $139.00

Cloth, Vinyl & Leather

‘03-‘05

GG-SCP0305CL: $139.00

Cloth, Vinyl & Leather

‘03-‘05

GG-SC0305CL: $139.00 ‘03-‘05 Cloth, Vinyl & ‘03-‘05 Leather ‘02-‘05, 1500 Cloth, Vinyl & ‘02-‘03, Leather

‘98-‘02 Regular Cab

GG-SCRC9801: $139.00

Cloth, Vinyl & Leather

‘98-‘02 Quad Cab GG-SC9801: $139.00

Cloth, Vinyl & Leather (Will not work on Regular Cab trucks.)

‘94-‘97 Regular & Extended Cab

GG-SC9497: $139.00

Cloth, Vinyl & Leather

PASSENGER SIDE

‘98-‘02 Quad Cab

GG-SCP9801: $139.00

Cloth, Vinyl & Leather

‘94-‘97 Regular & Extended Cab

GG-SCP9497: $139.00

Cloth, Vinyl & Leather

Replace a worn out seatback cover in your ‘06-‘09 Dodge Ram with these ‘Factory-Match’ OEM-style replacement seat bottom covers. All of the covers use either original or new production material and they are all made in the USA.

DRIVER SIDE SEAT BACK COVER

‘06-‘09, 2500/3500 LARAMIE - All Cabs

‘06-‘08, 1500 Mega Cab

Driver Side, Bucket Seat - Leather/Vinyl

KHAKI TSS300: $259.00

MEDIUM SLATE TSS302: $259.00

‘06-‘09, 2500/3500 SLT - All Cabs

‘06-‘08 1500 Mega Cab

Driver Side Bucket & 40/20/40 Seat - Cloth, with map pocket in the seat back

KHAKI TSS313B: $209.00

MEDIUM SLATE TSS315B: $209.00

‘06-‘08 1500 Laramie - Reg. & Quad Cab

Bucket & 40/20/40 Seat - Cloth

MEDIUM SLATE TSS316B: $209.00

‘06-‘09 2500/3500 ST - All Cabs

‘06-‘08, 1500 Mega Cab

40/20/40 Seat - Cloth

MEDIUM SLATE TSS319: $209.00

* Fits trucks with Occupant Classification System module under the seat cushion on driver side.

• Side of cushion raised to prevent “side lean.”

OEM-Style Bottom Seat Covers

Replace a worn out bottom seat cover in your ‘98-‘17 Dodge Ram with these ‘Factory-Match’ OEM-style replacement seat bottom covers. All of the covers use either original or new production material and they are all made in the USA.

‘06-‘09 Cloth Cover

DRIVER SIDE

‘06-‘09, 2500/3500 SLT

‘06-‘08 Ram 1500 SLT - Mega Cab

Bucket & 40/20/40 Seat - Carpet Flap Side

KHAKI TSS113: $179.00

MEDIUM SLATE TSS115: $179.00

‘06-‘09, 2500/3500 ST All Cabs

‘06-‘08 Ram 1500 Mega Cab only

Bucket & 40/20/40 Seat - Vinyl Flap Side

KHAKI TSS117: $179.00

MEDIUM SLATE TSS119: $179.00

‘06-‘08 Ram 1500 SLT - Reg. & Quad Cab

Bucket & 40/20/40 Seat - Plastic Panel Side

KHAKI TSS114: $179.00

MEDIUM SLATE TSS116: $179.00

‘06-‘08 Ram 1500 Reg. & Quad Cab

Bucket & 40/20/40 Seat - Plastic Panel Side

Will not fit ‘06-‘08 Mega Cab.

KHAKI TSS118: $179.00

MEDIUM SLATE TSS120: $179.00

‘13-‘17 Leather/Vinyl Covers Ventilated

TSS111: $249.00

LIGHT FROST

‘13-‘17, 1500/2500/3500

Laramie

TSS112: $249.00

‘13-‘18 Cloth Cover

DRIVER SIDE

‘13-‘18, 1500/2500/3500

Non-Laramie Models. Compare before ordering. Cloth, Diesel Gray w/Alloy II center insert

Trim Code = X9X8

DIESEL GRAY TSS135: $179.00

‘13-‘18, 1500/2500/3500

Non-Laramie Models. Compare before ordering. Cloth, Diesel Gray w/Carbide center insert

Trim Code = M9X8 or MJX8

DIESEL GRAY TSS136: $179.00

‘13-‘18, 1500/2500/3500

Non-Laramie Models. Compare before ordering. Cloth, Canyon Brown w/Alloy center insert

Trim Code = V9U1

CANYON BROWN TSS137: $179.00

‘13-‘18, 1500/2500/3500

Non-Laramie Models. Compare before ordering. Cloth, Canyon Brown w/Carbide center insert

Trim Code = M9U1 or MJU1

CANYON BROWN TSS138: $179.00

‘98-‘05 Cloth Cover

‘03-‘05 Quad Cab SLT, Manual, 40/20/40

Trim Code V9DV

Dark Slate: HRU101: $225.00

‘98-‘02 Quad Cab SLT, 40/20/40 Trim Code R1AZ

Will not work with trim code S9AZ.

Dark Gray/Agate: HRU103: $199.00

‘98-‘02 Quad Cab SLT, 40/20/40 Trim Code R1C3

Mist Gray: HRU104: $199.00

‘98-‘02 Standard Cab Trim Code R1AZ

Will not work with trim quality 59AZ.

Dark Gray/Agate: HRU107: $245.00

‘98-‘02 Standard Cab Trim Code R1C3

Mist Gray: HRU108: $245.00

‘98-‘05

Cover

The ‘10-‘12 leather seats are offered with a Waterfall or non-Waterfall front which refers to how the upholstery is stitched on the front of the seat. Check the seat in your truck before ordering as they are not interchangeable.

Waterfall Front non-Waterfall Front

( NOTE: Not all colors available at this time.)

‘02-‘12 Leather/Vinyl Covers

DRIVER SIDE

‘10-‘12, 2500/3500

‘09-‘12, 1500 Laramie (All Cabs)

Bucket Seat - Leather/Vinyl

Waterfall Front w/Heat & A/C

DARK SLATE TSS106: $249.00

PEBBLE BEIGE TSS110: $249.00

‘10-‘12, 2500/3500

‘09-‘12, 1500 Laramie (All Cabs)

40/20/40 Seat - Leather/Vinyl

Non-Waterfall Front

DARK SLATE TSS104: $229.00

PEBBLE BEIGE TSS108: $229.00

‘10, 2500/3500

‘09-‘10, 1500 Laramie (All Cabs)

Bucket Seat - Leather/Vinyl

Non-Waterfall Front with A/C

DARK SLATE TSS105: $249.00

PEBBLE BEIGE TSS109: $249.00

‘10-‘12, 2500/3500 ST (Reg/Crew/Mega)

‘09-‘12, 1500 ST (Reg/Quad/Crew)

All Vinyl

Dark Slate w/Medium Greystone insert

DARK SLATE TSS133: $159.00

‘06-‘09, 2500/3500

‘06-‘08, 1500 Mega Cab/Laramie

Bucket or 40/20/40 Leather Seat - Vinyl Flap Side

KHAKI TSS100: $239.00

MEDIUM SLATE TSS102: $239.00

‘06-‘09, 2500/3500 ST

‘06-‘08, 1500 Mega Cab

Bucket or 40/20/40 Vinyl Seat with textured insert Vinyl Flap Side

KHAKI TSS126: $179.00

MEDIUM SLATE TSS128: $179.00

‘06-‘08, 1500 ST

Bucket or 40/20/40 Vinyl Seat with textured insert

Hard Plastic Side Cover

Will not fit ‘06- 08 Mega-Cab

KHAKI TSS127: $179.00

MEDIUM SLATE TSS129: $179.00

‘06-‘08, 1500 Laramie

Bucket or 40/20/40 Leather Seat

Hard Plastic Side Cover

Will not fit ‘06-‘08 Mega Cab.

KHAKI TSS101: $259.00

MEDIUM SLATE TSS103: $259.00

‘04-‘05, 1500/2500/3500 SLT & Laramie

Bucket or 40/20/40 Seat - All Leather

DARK SLATE TSS130: $259.00

‘03, 2500/3500 Laramie

‘02-‘03, 1500

DORMAN

MOPAR

2003-2009 THIRD GENERATION

2003-2009 THIRD GENERATION

Sun Visor Clip Support

Visor - Plain - Driver’s Side

2500/3500

DORMAN Map Light Lense (‘03-‘10) Fits left or right side map light.

‘03-‘09, 2500/3500 • ‘02-‘08, 1500 ‘08-‘10, 4500/5500

DORMAN FOB Case and Buttons - Keyless Entry (‘99-‘05)

Keyless Entry Remote and Programmer

MOPAR 6-way Power Seat Switch without Lumbar Support - DRIVER SIDE

MOPAR Power Seat Switch without Lumbar Support - PASSENGER

Window/Lock Switch BezelDRIVER SIDE (‘03-‘05, Quad Cab)

DORMAN

MOPAR Power Window Door Switch with Lockout - DRIVER SIDE - Quad Cab

DORMAN Power Window Switch

LEFT OR RIGHT REAR

DORMAN Brake & Clutch Pedal Pad (‘03-‘18) For manual transmission trucks.

MOPAR Emergency Brake Foot Pad (‘03-‘23)

DORMAN Hood Release Cable with Handle (‘09-‘18)

2500/3500

1500 Direct replacement part. Black only.

DORMAN Parking Brake Release Handle (‘13-‘18) Direct replacement part. Black only.

DORMAN Parking Brake Handle (‘06-‘10)

3500/4500/5500 CC

2500/3500

1500

FRONT AND REAR DOOR SEALS

‘89-‘09, 2500/3500 • ‘94-‘08, 1500 (Driver or Passenger Side)

Regular Cab • Standard Cab • Extended Cab • Mega Cab • Quad Cab

This seal presses on the pinchweld lip on the body and fits either the driver or passenger doors. Made to OEM specs. Kit does one door only. Order two kits to do both sides.

QUAD/MEGA CAB

‘03-‘09, 2500/3500 • ‘08-‘10, 2500/3500

‘02-‘08, 1500 DRIVER or PASSENGER SIDE

FRONT 55277294AA: $104.95 each

REAR 55277293AA: $92.00

REGULAR/EXTENDED CAB - FRONT ‘94-‘02, 2500/3500 • ‘94-‘01, 1500 DRIVER or PASSENGER SIDE 55276286AA: $51.95 each

QUAD CAB - FRONT ‘94-‘02, 2500/3500 • ‘94-‘01, 1500 DRIVER SIDE ONLY 55276503AA: $ 63.95

REGULAR CAB - FRONT ‘89-‘93, 2500/3500 DRIVER or PASSENGER SIDE 55023781: $69.95 each

GLASS RUN CHANNEL SEAL

Quad Cab • Mega Cab (Driver or Passenger Side)

‘03-‘09, 2500/3500 • ‘02-‘08, 1500

The glass run simply presses into the front, top & back section of the glass channel. A separate smaller run is installed inside the door in the back channel.

REGULAR/QUAD/MEGA CAB DRIVER SIDE - FRONT

55276181AH: $94.95

QUAD CAB DRIVER SIDE - REAR 55276165AH: $79.95

REGULAR/QUAD/MEGA CAB PASSENGER SIDE - FRONT

55276180AH: $94.95

QUAD CAB PASSENGER SIDE - REAR 55276164AH: $79.95

BODY SIDE UPPER WEATHERSTRIP

‘94-‘10, 2500/3500 • ‘94-‘08, 1500 (Driver & Passenger Side)

Regular Cab • Mega Cab • Quad Cab

This seal runs along the windshield and cab roof. Made to OEM specs.

REGULAR CAB

‘03-‘09, 2500/3500 • ‘08-‘10, 4500/5500

‘02-‘08, 1500

DRIVER SIDE 55277189AB: $33.95

QUAD CAB

‘03-‘09, 2500/3500 • ‘08-‘10, 4500/5500 ‘02-‘08, 1500

DRIVER SIDE 55277191AB: $51.95

PASSENGER SIDE 55277190AB: $39.95

SIDE WINDOW BELTLINE SEAL

Quad Cab • Mega Cab (Driver & Passenger Side)

‘03-‘09, 2500/3500 • ‘02-‘08, 1500 • ‘08-‘10, 4500/5500

MEGA CAB

‘06-‘09, 2500/3500 • ‘06-‘08, 1500

DRIVER SIDE 55277035AB: $47.95

Replace a damaged side window beltline seal on your Dodge Ram truck with these MOPAR OEM seals.

OUTSIDE SEAL INSIDE SEAL

REGULAR/EXTENDED CAB

‘94-‘02, 2500/3500 • ‘94-‘01, 1500

DRIVER SIDE 55275437AB: $69.95 each

DOOR LOWER SEAL

‘03-‘09, 2500/3500 • ‘02-‘08, 1500 ‘08-‘10, 4500/5500

FRONT

STANDARD CAB - FRONT

‘03-‘09, 2500/3500 • ‘02-‘08, 1500 • ‘08-‘10, 4500/5500

DRIVER SIDE 55277215AA: $76.95

QUAD CAB - FRONT ‘03-‘09, 2500/3500 • ‘02-‘08, 1500 • ‘08-‘10, 4500/5500

DRIVER SIDE 55276203AH: $45.95

PASSENGER SIDE 55276202AH: $40.95

MEGA CAB - FRONT

‘06-‘09, 2500/3500 • ‘06-‘08, 1500

DRIVER SIDE 55276203AH: $45.95

PASSENGER SIDE 55276202AH: $40.95

QUAD CAB - REAR ‘03-‘09, 2500/3500 • ‘02-‘08, 1500 • ‘08-‘10, 4500/5500 Built after 1/13/03.

DRIVER SIDE 55276959AA: $ 56.95

PASSENGER SIDE 55276958AA: $59.95

MEGA CAB - REAR

‘06-‘09, 2500/3500 • ‘06-‘08, 1500

DRIVER SIDE 55277031AD: $39.95

PASSENGER SIDE 55277030AD: $39.95

QUAD CAB - FRONT ‘03-‘09, 2500/3500 • ‘02-‘08, 1500 • ‘08-‘10, 4500/5500

DRIVER/PASSENGER SIDE 55276896AF: $28.95

PASSENGER SIDE 55277214AA: $76.95

QUAD CAB - FRONT ‘03-‘09, 2500/3500 • ‘02-‘08, 1500 • ‘08-‘10, 4500/5500

DRIVER SIDE 55277217AA: $76.95

PASSENGER SIDE 55277216AA: $76.95

MEGA CAB - FRONT ‘06-‘09, 2500/3500 • ‘06-‘08, 1500

DRIVER SIDE 55277217AA: $76.95

PASSENGER SIDE 55277216AA: $76.95

REAR

MEGA CAB - REAR ‘06-‘09, 2500/3500 • ‘06-‘08, 1500

MEGA CAB - FRONT or REAR ‘06-‘09, 2500/3500 • ‘06-‘08, 1500

DRIVER/PASSENGER SIDE 55277028AF: $49.95

DRIVER SIDE/ PASSENGER SIDE 55277032AC: $23.95

Windshield Molding, ‘00-02

for

1500

with 3 sides and welded corners.

Windshield Molding, ‘94-‘99 1500/2500/3500 Molding for windshields with 3 sides and welded corners.

Regular, Extended or Quad Cab Driver or Passenger Door

Also fits ‘94-‘01, 1500

This seal presses on the pinchweld lip on the body and fits either the driver or passenger doors. Made to OEM specs. Kit does one door only. Order two kits to do both sides.

Quad Cab

Driver or Passenger Vertical Rear Door Seal

This door weatherstrip attaches with the pre-applied clips to the vertical left rear side of the quad cab. Made to OEM specs.

Side Glass Run Channel

The glass run simply presses into the front, top & back section of the glass channel. A separate smaller run is installed inside the door in the back channel.

This two-piece kit fits one side.

Driver and Passenger Side Window Beltline Seal Kit

These beltlines mount with the pre-applied clips on the left & right doors to sweep the inside & outside of the glass. Made to OEM specs.

Sold only as a kit.

Rear Window Seal without Trim Groove for Lockstrip

(Only fits ‘94-‘97, 1500/2500/3500)

This application goes first on the glass and is installed using the rope-in method. Made to OEM specs. Will not work with OEM sliding windows.

$14.95

REGULAR OR EXTENDED CAB

DWB-3110-94: $38.95

QUAD CAB DRIVER SIDE

DWL-3110-98: $47.95

PASSENGER SIDE

DWR-3110-98: $47.95

DRIVER SIDE

DWL-3120-98: $56.95

PASSENGER SIDE

DWR-3120-98: $59.95

DRIVER SIDE

GRK-3110-94L: $46.95

PASSENGER SIDE

GRK-3110-94R: $45.95

WFK-3110-94: $56.95

WBL-DB8791: $49.95

1989-1993 FIRST GENERATION

Windshield Weatherstrip Seal with Trim Groove for Lock Strip

This windshield seal goes first on the body then the glass is placed in the opening. A separate lockstrip (not included) inserts into the rubber and secures the glass in place. Made from ozone resistant EPDM rubber and to OEM specs.

Windshield Glass Seal Lockstrip

This chrome lockstrip inserts into the weatherstrip to lock in the glass. Made from ozone resistant EPDM rubber and to OEM specs. For use with windshield seal WCR-914. Includes center clip/clamp. Does one application.

Driver or Passenger Side Door V Regular or Extended Cab

Seal presses on the pinchweld lip on the body and fits either the driver or passenger doors. Made from ozone resistant EPDM rubber and to OEM specs.

Kit does one door only. Order two kits to do both sides.

Driver and Passenger Side V Glass Run Channel

These beltlines mount with the pre-applied clips on the left & right doors to sweep the inside & outside of the glass. Made from ozone resistant EPDM rubber and to OEM specs.

Sold only as a kit.

Rear Window Seal without Trim Groove for Lockstrip

This rear window seal goes first on the glass and is installed using the rope-in method. It is a standard black gasket without trim groove. Made from ozone resistant EPDM rubber and to OEM specs. Will not work with OEM sliding windows.

Rear Window Seal with Trim Groove for Lockstrip

This rear window seal goes first on the body then the glass is placed in the opening. A separate lockstrip (not included) inserts into the rubber and secures the glass in place. Made from ozone resistant EPDM rubber and to OEM specs. Will not work with OEM sliding windows.

Glass Seal Lockstrip

This chrome lockstrip inserts into the weatherstrip to lock in the glass for the rear window. It’s sold as a single piece to do one application. Made from ozone resistant EPDM rubber and to OEM specs.

For use with rear window seal WCR-1129.

Lockstrip Insert Tool

It is specifically designed for self-sealing two-piece rubber weatherstripping. The eye of the tool threads locking strip into the groove and inserts it into the channel.

For use with rear window seal WCR-1129.

Lockstrip Molding Center Joint Clamp

This center joint is made from myler chrome and covers the seam where the two ends meet. Made to OEM specs to fit for an authentic appearance.

1 required per vehicle.

WCR-914: $74.95

WLS-913/914-SP: $20.95

DWB-3110-78: $25.95

WFK-3111-80: $87.95

WBL-1129: $63.95

WCR-1129: $46.95

WLS-1129-C: $27.95

PRP-0002: $10.95

LJC-914-C: $1.95

FREE SHIPPING!

PowerStep RUNNING BOARDS I V

‘18-‘22, 2500/3500

AMP-76239-01A: $1,649.00

‘18, 1500 & ‘19-‘21, 1500 Classic - Diesel Only Plug-n-Play Model

All Cabs - Regular, Quad, Crew, Mega (OEM Air Ride suspension requires Air Tank Relocation Kit below.)

2500/3500

AMP-76139-01A: $1,649.00

All Cabs - Regular, Quad, Crew, Mega Plug-n-Play Model

1500/2500/3500

AMP-76138-01A: $1,649.00

All Cabs - Regular, Quad, Crew, Mega Plug-n-Play

SPLASH WHAM-O TAILGATE PROTECTOR (‘09-’23)

‘10-‘23, 2500/3500, ‘19-‘23, 1500 Classic & ‘09-‘18, 1500 GG-SPLASH10: $119.95

‘19-‘23, 1500 “DT” Series New Body Style

GG-SPLASH20: $119.95

Family Problems: What to do about Splash and Wham-o?

We’re all family, right? Yet, some problems are too embarrassing to discuss. Begrudgingly, let’s talk about Splash and Wham-o.

Splash was a problem the first time you opened the Fourth Generation truck’s tailgate. Water accumulated on the plastic aero-lip of the tailgate cover and you got a splash on your front side when you dropped the tailgate. Such a poopie design.

Quad Cab Hardwired Model

Plug-n-Play Conversion Kit (‘13-‘18)

Air Tank Relocation Kit

‘19-‘21, 2500/3500 Crew Cab

Factory Air Ride Air Tank Relocation Kit

‘14-‘18 2500/3500 Crew Cab

Factory Air Ride Air Tank Relocation Kit

‘14-‘18 2500/3500 Mega Cab

Plug-n-Play Pass Through Harness Kit

AMP-76402-01A: $199.00

AMP-79109-01A: $55.00

AMP-10-79101-01A: $45.00

AMP-10-79102-01A: $62.00

AMP-76404-01A: $95.00

Allows you to have an open OBDII port when AMP PowerStep is installed with the Plug-n-Play Kit (Freddy Frugal: see Auto Meter adapter on page 51.)

Dodge Quad Cab and Mega Cab owners have to look no further than the AMP Research PowerStep for a great accessory. These steps are outstanding. There are no holes to drill as the kit utilizes existing holes in the body. The factory instructions are thorough, and the installation was not difficult. The fit and finish are flawless. 600 lbs. capacity.

Form: The AMP Research design tucks up and under the truck’s side pinch rail. In the up position, they are out of sight, leaving your truck with a clean, uncluttered look.

Function: In the down position (eight-inch drop), you can’t beat the fulllength step board for ease-of-entry/exit access to your truck.

NOTE: Additional shipping charges apply to steps shipping to Alaska and Hawaii.

Bed Step™

Made in USA.

RAM 2500/3500 RAM 1500

‘19-‘22, 2500/3500

AMP-75324-01A: $290.00

‘10-‘18, 2500/3500

AMP-75306-01: $290.00

‘03-‘09, 2500/3500

AMP-75304-01: $290.00

‘09-‘18, 1500 & ‘19-‘21 1500 Classic (Gas Only)

Single Exhaust

AMP-75306-01: $290.00

‘02-‘08, 1500

AMP-75304-01: $290.00

The Bed Step gives easy access to pickup beds even with the tailgate down. It is made from high-strength aluminum alloy with a durable powdercoat finish to provide long-term durability.

Rugged stepping platform supports up to 300 pounds of weight. Designed with a spring-loaded cam, the Bedstep stows away and deploys with a flip of the foot. Easy five-minute bolt-on installation.

NOTE: Bed Step attaches to stock bumper only. Will not work with aftermarket bumpers.

Wham-o, he came along a little later, like the first time someone else dropped the tailgate onto a close-by trailer jack. Bam/thunk! Now there is a big dent in the tailgate’s horizontal edge that no one knows anything about. Such a poopie design.

Our plastic tailgate protector corrects the problem that Splash created with a flat surface instead of the aero-lip. Our plastic tailgate protector corrects the problem that Wham-o created by wrapping (covering up) the tailgate’s horizontal edge. This is a heck of a lot cheaper than repairing a tailgate.

The Splash Wham-o cover is textured like the factory plastic cover. New mounting hardware included. Keep yourself dry and protect (cover up) your tailgate with the Splash and Wham-o tailgate protector.

EZ Down, ‘03-‘09

EZ_DOWN: $39.95

A sudden and uncontrolled drop of a truck tailgate is unsettling – WHAM! Free yourself from the frustration of juggling overflowing loads and properly bracing a dropping tailgate with the EZ Down tailgate damper.

The EZ Down installs in minutes. All parts are included in the kit and there are no holes to drill.

NOTE: The EZ Down does not help in bringing the tailgate upright to the closed position.

‘06-‘09, 2500/3500 & ‘06-‘08, 1500 55077767AF: $469.95

‘03-‘05, 2500/3500 & ‘02-‘05, 1500 55077185AG: $439.95

‘94-‘02, 2500/3500 & ‘94-‘01, 1500 55076550AB: $450.00

Over the years your truck’s front grille has probably been damaged from road debris or suffered from other damage and could use to be replaced. Get your truck looking new(er) again with a genuine Mopar replacement grille.

*Oversize shipping charges may apply.*

All PowerSteps ship with light kit.

RAM chrome grilleS, ‘94-‘09

Ram 1500 model specific AMP products available online.

GASKETSWEATHERSTRIPPING & REPLACEMENT PARTS

Replacement Cowl Vent Grille Mounting Clip and Nut Kit (‘94-‘02, 2500/3500 & ‘94-‘01, 1500) Includes 5 clips and nuts.

Hood Bumper Set with Stainless Steel Screws (‘72-‘93, 150/250/350)

MOPAR Hood Bumper Pads (‘94-‘02, 2500/3500 & ‘94-‘01, 1500)

Stainless Steel Hood Pop-Up Latch Spring (‘72-‘93, 150/250/350)

Diesel Radiator Splash Shield Seal (‘89-‘91, 250/350 Non-intercoooled) Clips included.

Diesel Radiator Splash Shield Seal (‘91.5-‘93, 250/350 Intercoooled) Clips included.

Engine Well Frame Rail Splash Shields (‘92-’93) Sold as a pair. 32 OEM-style clips included.

Engine Well Frame Rail Splash Shields (‘90-’91) Sold as a pair. 32 OEM-style clips included.

Engine Well Frame Rail Splash Shields (‘81-’89) Sold as a pair. 31 OEM-style clips included.

Splash Shield Large Head Stainless Steel Clip (‘61-‘93, 150/250/350)

Non-A/C Heater Blower Motor Gasket (‘72-‘93, 150/250/350 & ‘66-’70, 150/250/350)

Firewall MEGA Gasket Set (‘81-‘93, 150/250/350) Includes additional speedometer and OEM parking/ emergency brake cable grommet.

Firewall Standard Gasket Set (‘81-‘93, 150/250/350)

Steering Column Gasket (‘78-‘93, 150/250/350)

GG-COWLCL94

DMTRK7293BB01-H

DORMAN Exterior Door Handle - Chrome (‘78-‘93)

Door handle gaskets included. Door handle reinforcements on page 74.

Door Handle and Lock Gaskets

Driver & Passenger Side (‘72-‘93, 150/250/350)

DORMAN Door Striker (‘89-‘93)

DMCHR2935375-T

DMTRK8991SS30

DMTRK9193SS30 $14.95

DMTRK8993SS20-D $58.95

DMTRK9091SS20-D $58.95

DMTRK8189SS20-D $58.95

DMCHR6029886 $.50

DMCHR2485429 $7.95

DMTRK8193FW01M $52.95

DMTRK8193FW01

DMTRK7893SC01

Fuel Filler to Body Gasket (‘81-‘93, 150/250/350) DMCHR4185304

Parking/Emergency Brake Cable-to-Firewall Grommet (‘60-‘93, 150/250/350) Includes screws for installation.

DORMAN Spare Tire Hoist Assembly (‘03-‘12, 2500/3500 & ‘02-‘05, 1500)

DMCHR2259118

Made from durable steel. Thread size: 7/16” - 14. DRM38442 $10.95

Cab Cargo Light Lamp Gasket (‘72-‘93, 150/250/350)

Die cut, EPDM gray foam rubber gasket. Fits two bulb lights only.

Third Brake Light Gasket with Adhesive Backing (‘94-‘02, 2500/3500 & ‘94-‘01, 1500)

Thicker foam and adhesive backing helps stop water leaking into cab.

Third Brake Light Gasket with Adhesive Backing (‘03-‘09, 2500/3500 & ‘02-‘08, 1500)

Thicker foam and adhesive backing helps stop water leaking into cab.

Third Brake Light Gasket with Adhesive Backing

(‘10-‘18, 2500/3500 & ‘09-‘18, 1500)

Thicker foam and adhesive backing helps stop water leaking into cab.

*Will not work with third brake lights with camera.

Third Brake Light Gasket

2500/3500 with

DMTRK7280BL01 $6.95

DMRAM9401BL01 $9.95

Door Hinge Bolt Access Plug (‘72-‘93,

DORMAN Hinge Pin & Bushing Kit (‘89-‘93) Kit includes 4 pins and 8 bushings.

MOPAR Hinge, Upper Left, Front Door ‘94-‘02, 2500/3500 & ‘94-‘01, 1500

MOPAR

Lower Left & Right, Front Door

DMRAM0918BL01

2500/3500 & ‘02-‘08, 1500)

DORMAN Tailgate Hinge Bushing Kit

(‘95-‘01, 1500 & ‘95-‘02, 2500/3500)

DORMAN Tailgate Hinge Kit

(‘03-‘09, 2500/3500 & ‘02-‘08, 1500) Bushings sold separately.

DORMAN Tailgate Support Cables (‘03-‘23, 2500/3500 & ‘02-‘18, 1500 & ‘19-‘23, 1500 Classic) Sold as a pair.

DORMAN Tailgate Support Cable (‘94-‘0 2, 2500/3500 & ‘94-‘01, 1500) Left or Right Sold individually.

DORMAN Tailgate Hardware Rebuild Kit (‘03-‘09, 2500/3500 & ‘02-‘07, 1500)

Includes: 1 handle, 1 latch bracket, 2 latches, 2 cables, 2 latch rods, 2 latch bolts, 10 M6 body screw, 2 M5 flange lock nuts

MOPAR Fifth Wheel/Gooseneck Pickup Bed Plug Cover Kit (‘13-‘23) 2500/3500

Contains 4 mounting hole covers and 1 gooseneck hole cover.

GG-TGBKIT $22.95

DRM38641 $10.95

DRM38650 $20.95

DRM38542 $21.95

DRM38535 $12.95 each

DRM38911 $188.95

‘13-‘15 68225506AA: $55.95 ‘16-‘23 68293200AB: $ 44.95

‘10-‘18

HUSKY LINER MUD GUARDS PART#

REAR SRW 2500/3500 with OEM Fender Flares

REAR DRW 3500 without OEM Fender Flares

REAR DRW 3500 with OEM Fender Flares

‘06-‘09 REAR DRW 3500 MEGA CAB without OEM Fender Flares

‘03-‘09

‘94-‘02

REAR SRW 2500/3500 without OEM Fender Flares

REAR DRW 3500 REGULAR/QUAD CAB without OEM Fender Flares

REAR SRW 2500

REAR DRW 3500

SG-DG-57161: $42.95

SG-DG-57181: $69.95

SG-DG-57191: $80.95

SG-DG-57121: $69.95

SG-DG-57061: $42.95

SG-DG-57071: $69.95

SG-DG-56001: $42.95

SG-DG-57051: $69.95

NOTE: These Husky Liner mud guards (Front and Rear) are custom-molded to fit the contour of the truck’s wheel well. They are pre-drilled and the holes line up with existing factory screw/trim hole locations. However, they do not extend as far below the bodywork as the Mopar splash guards.

‘19-‘23

‘19-‘23

MOPAR SPLASH GUARDS PART#

FRONT 2500/3500 with OEM Fender Flares ( HEAVY-DUTY RUBBER)

FRONT 2500/3500 without OEM Fender Flares ( HEAVY-DUTY RUBBER)

FRONT 2500/3500 with OEM Fender Flares ( DELUXE MOLDED PLASTIC)

FRONT 2500/3500 without OEM Fender Flares ( DELUXE MOLDED PLASTIC)

FRONT 2500/3500 with OEM Fender Flares ( HEAVY-DUTY RUBBER)

FRONT 2500/3500 without OEM Fender Flares ( HEAVY-DUTY RUBBER)

‘10-‘18

FRONT 2500/3500 with OEM Fender Flares ( DELUXE MOLDED PLASTIC)

FRONT 2500/3500 without OEM Fender Flares ( DELUXE MOLDED PLASTIC)

REAR SRW 2500/3500 with OEM Fender Flares ( HEAVY-DUTY RUBBER)

‘19-‘23

‘19-‘23

REAR SRW 2500/3500 without OEM Fender Flares ( HEAVY-DUTY RUBBER)

REAR DRW 3500 with OEM Fender Flares ( HEAVY-DUTY RUBBER)

REAR DRW 3500 without OEM Fender Flares ( HEAVY-DUTY RUBBER)

REAR SRW 2500/3500 with OEM Fender Flares ( DELUXE MOLDED PLASTIC)

REAR SRW 2500/3500 without OEM Fender Flares ( DELUXE MOLDED PLASTIC)

REAR SRW 2500/3500 with OEM Fender Flares ( HEAVY-DUTY RUBBER)

REAR SRW 2500/3500 without OEM Fender Flares ( HEAVY-DUTY RUBBER)

‘10-‘18

REAR DRW 3500 with or without OEM Fender Flares ( HEAVY-DUTY RUBBER)

REAR SRW 2500/3500 with OEM Fender Flares ( DELUXE MOLDED PLASTIC)

REAR SRW 2500/3500 without OEM Fender Flares ( DELUXE MOLDED PLASTIC)

‘03-‘09

REAR SRW 2500/3500 ( DELUXE MOLDED PLASTIC) CLOSEOUT!

SG-DG-82215928AB: $65.00/pair

SG-DG-82215930AB: $65.00/pair

SG-DG-82215923AB: $ 49.95/pair

SG-DG-82215924AB: $61.95/pair

SG-DG-82216222: $73.95/pair

SG-DG-82216221AA: $63.95/pair

SG-DG-82214137: $59.95/pair

SG-DG-82212287AC: $60.95/pair

SG-DG-82215929AB: $ 65.00/pair

SG-DG-82215931AB: $65.00/pair

SG-DG-82215933AB: $79.95/pair

SG-DG-82215932AB: $77.00/pair

SG-DG-82215926AB: $63.95/pair

SG-DG-82215925AB: $65.95/pair

SG-DG-82216223AA: $75.95/pair

SG-DG-82216219AA: $65.95/pair

SG-DG-82216220AA: $80.00/pair

SG-DG-82214136: $74.95/pair

SG-DG-82211228: $53.95/pair

SG-DG-82207241: $69.95/pair

FRONT

Heavy-Duty Rubber (‘10-‘18) 2500/3500

REAR

Deluxe Molded Plastic (‘10-‘18) 2500/3500

FRONT & REAR Mud Guards

Ram 1500 model specific splash guards available online.

gENO’S garage

diesel fuel filler cap, ‘19-’23

‘19-‘23, Ram 2500/3500

‘20-‘23 1500 EcoDiesel

GG-DSLFC19: $37.95

This cap fits all Ram 2500/3500 filler necks with 3 guide bars inside the neck. Cap is magnetic so you can put it on the filler door while adding fuel so you don’t leave it behind.

ALUMINUM GREEN LOCKING

FUEL CAP, ‘13-‘23 V

‘19-‘23, Ram 2500/3500 & ‘20-‘23, 1500 EcoDiesel

GG-EZ45GLC: $66.95

Includes one GG-EZSKEY-P locking key.

‘13-‘18, Ram 2500/3500 & ‘13-‘18, 1500

GG-EZLC1: $54.95

Includes one GG-EZSKEY-P locking key.

Spare Locking Key GG-EZSKEY-P: $9.50

In 2013 the folks at Ram introduced a new fuel fill neck. The top of the neck is non-threaded and this design made the traditional screw-in and locking fill cap obsolete.

The new design is simply a flapper-on-a-spring. Ram responded to the market’s need for a fill cap by adding an 89¢ plastic plug. However, folks still wanted a locking fuel cap.

This locking fuel cap is a simple design, a twist of the key lets you move the locking collar to remove the fuel cap.

MOPAR DIESEL FUEL

FILLER DUST CAP, ‘19-‘23

‘19-‘23, Ram 2500/3500

‘20-‘23, Ram 1500 EcoDiesel - Classic 82215782: $25.95

This dust cap helps keep the fuel filler area clean so debris does not end up in your truck’s fuel tank

Aluminum Green ‘DIESEL’ FUEL FILL Cap

‘13-‘18, 2500/3500 6.7L ‘14-‘19, Ram 1500 EcoDiesel GG-DSLFC13: $23.95

This billet dust cap has an external O-ring that slides into the fuel fill neck. There is a magnet recessed into the base so that you can put the fuel cap on the back side of the door when filling the tank.

LOCKING

‘00-‘12 2500/3500

‘08-‘23 Cab/Chassis

GATES-31836D: $15.95

‘89-‘99 LOCKING

GATES-31734D: $20.95

Green Fuel Caps (‘89-‘23)

STANDARD

‘00-‘12 2500/3500

‘08-‘23 Cab/Chassis

GATES-31838D: $7.95

‘89-‘99 STANDARD

GATES-31615D: $8.95

The locking fuel caps are plastic with a stainless steel lock and key, the designs feature sturdy construction to meet Federal Fuel Safety Standards for fuel leakage. Locking gas caps include a quick on/off, quarter-turn, green locking gas cap and two keys.

A standard fuel cap can be used with your truck’s plastic tether by drilling a 7/32” hole – then enlarging by hand to a 1/4” hole – in the top of the cap.

gENO’S garage

GASOLINE fuel filler cap, ‘19-’22

‘19-‘22, Ram 1500 - Gas Engine

GG-GASLC19: $77.95

Includes one GG-EZSKEY-P locking key.

These caps fit all gasoline engine Ram 1500 filler necks.

Spare EZ-loc Key

GG-EZSKEY-P: $9.50

2.5” Long

EZ-loc pROFILED SECURE stainless steel TEE KEY

GG-EZCTKEY $21.95 2.5” Long

EZ-LOC ANODIZED BILLET ALUMINUM LOCKING FUEL CAP

‘08-‘23, Ram 3500/4500/5500 Cab/Chassis

GG-EZCC4G: $50.00

Includes one GG-EZSKEY-P locking key.

Spare Locking Key

GG-EZSKEY-P: $9.50

Heavy-duty anodized billet aluminum fuel cap. Each EZ-Loc comes with the EZ-Loc cap and an EZ-Loc Secure Key. This locking fuel cap is not designed to work with the OEM tether.

DEF-LOC ALUMINUM

LOCKING ‘DEF’ CAP, ‘13-’23

‘19-‘23, Ram 2500/3500/4500/5500

‘20-‘23, Ram 1500 EcoDiesel

GG-EZ45GDEF: $49.95

Includes one GG-EZSKEY-P locking key.

‘13-‘18, Ram 1500/2500/3500/4500/5500

‘19, Ram 1500 Classic

GG-EZDEF1: $49.00

Includes one GG-EZSKEY-P locking key.

Spare Locking Key Lock Tether

GG-EZSKEY-P: $9.50

GG-EZTETHER : $6.00

The DEF-Loc is the locking/tamper-resistant DEF cap for Dodge Ram diesels. Locking up your DEF prevents unwanted matter from being put into your DEF tank. The DEF-Loc also features an EPDM U-Cup seal and also has a venting feature cut into the underside of the stainless steel Secure Screw head.

Each DEF-Loc comes with the DEF-Loc cap and an EZ-Loc Secure Key. This DEF cap is not designed to work with OEM tether.

chassis/cab DEF CAP WITH TETHER, ‘13-’23 3500/4500/5500

68101183AC $38.95

DEF cap specifically for Ram Chassis/Cab trucks. Will not fit regular pickup trucks.

Made in USA

Made in USA

HEAVY-DUTY ‘SCRUBBLADE’ WINDSHIELD WIPERS

22” BLADE

‘10-‘23, 2500/3500

‘11-‘23, Chassis/Cab

‘09-‘23, 1500 Classic

SB2200: $19.95 Single / $36.00 Pair

24” BLADE

‘19-‘23, 1500

‘03-‘09, 2500/3500

‘03-‘10, Chassis/Cab

‘02-‘08, 1500

SB2400: $19.95 Single / $36.00 Pair

20” BLADE

‘94-‘02, 2500/3500

‘94-‘01, 1500

SB2000: $19.95 Single / $36.00 Pair

18” BLADE ‘89-‘93, 150/250/350

SB1800: $19.95 Single / $36.00 Pair

We’re always on the lookout for products that represent the best value for your money. At the 2017 SEMA Show we discovered the Scrubblade. We asked, “A rubber wiper blade is a rubber wiper blade, right?” As it turns out (a long story), rubber compounds greatly differ and you get what you pay for. With a closer look we noticed the Scrubblade’s dual blades, the patented scrub pattern and scrub “nibs.” These are three features that make these wiper blades worthy of your attention. Finally, the Scrubblade is competitively priced. So: premium rubber + great design + good price = best value.

TOUCH UP PAINT

Fix small scratches on your truck with Mopar touch up paint for exact match to OEM color.

Brilliant Black Crystal PXR 4889820AC: $14.95

Black Clear Coat PX8 4342250AC: $12.95

Bright White PW7 4889598AC: $14.95

Luxury Brown PTW 5163556AB: $14.95

Deep Cherry Red PRP 5163648AB: $14.95

True Blue PBU 5163947AB: $12.95

Deep Forest Green PGT 5163679AB: $14.95

Black Forest Green PGZ 5163957AB: $14.95

Granite Crystal Metallic PAU 68183829AB: $14.95

Pearl White PWQ 6102866AA: $14.95

Flame Red PR4 82400890AC: $14.95

Bright Silver Metallic PS2 4889427AC: $14.95

Bright Silver Metallic PSC 5163738AB: $12.95

Mineral Gray Metallic PDM 4889921AC: $14.95

Maximum Steel PAR 68154430AB: $14.95

Blue Streak PCL 5163953AB: $14.95

Patriot Blue PPX 6102967AA: $12.95

Diamond Black Crystal PXJ 68154436AB: $12.95

Paint sales code located on door sticker. Includes Abrasive Prep Tip, Paint Pen, Paint Brush, Top Coat and Applicator.

CABPL-CI-3580: $4.50

OEM emblem.

‘13-‘18, “Cummins C”

Chrome Emblem

68149701: $93.95

OEM emblem.

Ram 1500 EcoDiesel Emblem

‘14-‘18, 1500 & ‘19-‘20 Classic

68164914AA: $57.95

OEM replacement emblem.

“RAM 3500” 24V Emblem

55295314AC: $83.95

OEM emblem for ‘98.5-‘02 24-valve trucks.

‘15-‘18, “Cummins C”

Black Emblem

68276962: $86.95 OEM emblem.

Cannot ship to Alaska or Hawaii. No Air or Expedited shipping.

CABPL-CI3571: $4.95 OEM emblem.

55295314AB: $89.95

OEM

“RAM 2500” 24V Emblem ‘98.5-‘02, 24V 55295313AC: $85.95

OEM emblem.

Grille emblem ‘10-‘12, 2500/3500

‘09-‘12, 1500

68050754AA: $56.95

OEM emblem.

Measures 110mm wide.

Grille emblem ‘03-‘05, 1500/2500/3500

5073290AB: $69.95

MOPAR OEM emblem.

Measures 61mm wide.

Grille emblem

‘10, 3500 Chassis Cab ‘03-‘09, 2500/3500

‘03-‘08, 4500/5500

68139834AA: $67.95

OEM emblem.

Measures 76mm wide.

Grille emblem ‘94-‘02, 2500/3500

‘94-‘01, 1500

55295240: $65.95

OEM emblem. No adhesive included.7

DOOR HANDLE REINFORCEMENT PLATES,

‘75-’93

ND-DR8993: $36.95

Fix a known weak spot on Dodge 150/250/350 trucks with this 16 gauge stainless steel reinforcement plate. With the interior door panel removed, it installs on the inside of the door and braces the door handle.

PUTCO Black Platinum Door Sill Guard Set

‘10-‘23, 2500/3500/4500/5500

‘09-‘18, 1500 Crew Cab Only PUTCO-95191BP: $62.99 Contains 4 pieces.

Protect your truck’s inner door sill from scuffs and scratches with these black stainless steel door sill guards. They are also great for covering up your already scuffed door sill. Sold in sets of 4. Quick and easy installation with 3M automotive tape.

“RAM 3500” 12V Emblem

emblem for ‘94-‘98 12-valve trucks.

CUMMINS POWER Emblem

CUMMINS C Emblem

Replacement door handles available on page 71.

Towing Mirror Glass, ‘10-‘21

Towing Mirror Signal Lights ‘10-‘22, 2500/3500 & ‘19-‘22 1500 Classic

The turn signal in the outside mirror has been revised. Please make sure it is visually matches the opposite mirror. if not, both sides will need to be replaced.

Aftermarket Mirror Glass Assemblies

*Check the back of the

for mount type before ordering.

Putco’s Blade LED Tailgate Light Bar Kits

Brighten up your Ram’s rear lighting configuration and add extra safety with the addition of a Blade LED Tailgate Light Bar Kit. The light bar spans nearly the width of the tailgate and is mounted just under it, directly above the rear bumper. It works in tandem with your OE rear lights including running lights, braking lights, reversing lights and turn signals. Their multi-patented design allows for a quick and painless installation – with no cutting or splicing of your factory harness required using their proprietary Quick Connect Harness. Best of all, you add up to 2000 lumens to the rear lighting in a streamlined design with the 60” light bar.

2 piece 18” Light Bar with vehicle-specific harness

‘19-‘23 1500 DT Series

PUT-9200918-04: $290.99

60” LED Light Bar with vehicle-specific harness ‘09-‘18 1500 ‘10-‘18 2500/3500

‘19-‘23 2500/3500

PUT-9201960-04: $316.99

* Oversize shipping may apply.

2 piece 18” shown above.

60” shown below.

MOPAR DUAL REAR WHEEL SIMULATORS

MOPAR WHEEL CENTER CAPS

REPLACEMENT HEADLIGHTS

‘13-‘18,

Halogen Projector w/Black Bezel

not work on non-Sport trucks without the purchase of Brite Box ‘Sport’ headlight conversion for either ‘94-‘98 or ‘99-‘02 trucks.

REPLACEMENT FOG LIGHTS

‘13-‘18, 1500

‘19, 1500 Classic

DRIVER 68104821AF: $99.00

PASSENGER 68104820AF: $ 99.00

DRIVER DEP-3342020L: $39.95

PASSENGER DEP-3342020R: $39.95

DRIVER 55372735AB: $82.95

‘10-‘18, 2500/3500/ 4500/5500

‘09-‘12, 1500

PASSENGER 55372734AB: $81.95

DRIVER DEP-3342015L: $33.95

PASSENGER DEP-3342015R: $33.95

‘03-‘09, 2500/3500

‘02-‘08, 1500

DRIVER 55077475AE: $164.00

PASSENGER 55077474AE: $164.00

DRIVER DEP-3342009L: $44.00 RIGHT DEP-3342009R: $44.00

DRIVER, ‘99-‘02 55076941AB: $78.95

‘99-‘02, 2500/3500

‘99-‘01, 1500

w/o Sport Package

DRIVER DEP-3342011L: $35.00

PASSENGER DEP-3342011R: $35.00

‘98-‘02, 2500/3500

‘98-‘01, 1500 with Sport Package

DRIVER or PASSENGER 55076942AB: $95.95

‘94-‘02, 2500/3500

1500 Single bulb

150/250/350

‘13-‘18, 2500/3500

LED lights with Black housing.

DRIVER 68093081AC: $299.95

PASSENGER 68093080AC: $299.95

‘94-‘02, 2500/3500

‘94-‘01, 1500 with Textured Black Frame Non-Sport trucks.

‘13-‘18, 2500/3500

LED lights with Chrome housing.

DRIVER 68093079AC: $299.95

PASSENGER 68093078AC: $299.95

‘99-‘02, 2500/3500

DRIVER 55055265AC: $79.95

PASSENGER 55055264AC: $79.95

DRIVER DEP-3331909L-TXTBL: $32.95

PASSENGER DEP-3331909R-TXTBL: $32.95

‘10-‘18, 2500/3500

‘09-‘18, 1500

‘19, 1500 Classic Non-LED lights.

DRIVER 55277415AE: $114.95

PASSENGER 55277414AF: $119.95

‘99-‘01, 1500 with Smooth Black Frame Sport trucks.

DRIVER DEP-3331909L: $49.95

PASSENGER DEP-3331909R: $49.95

‘07-‘09, 2500/3500

‘07-‘08, 1500 Non-LED lights.

DRIVER 55277303AC $72.95

PASSENGER 55277302AC: $72.95

DRIVER DEP-3341916L: $44.00

PASSENGER

DEP-3341916R: $44.00

‘89-‘93, 150/250/350 with Black Frame

DRIVER DEP-3331902L: $42.00

PASSENGER DEP-3331902R: $42.00

‘03-‘06, 2500/3500

‘02-‘06, 1500

Tail light circuit strips sold separately.

DRIVER 55077347AF $124.95

PASSENGER 55077348AF: $124.95

‘89-‘93, 150/250/350 with Chrome Frame

DRIVER DEP-3331923L: $35.00

PASSENGER DEP-3331923R: $35.00

DRIVER DEP-3341906L: $41.00

PASSENGER

DEP-3341906R: $41.00

Tail Light Circuit Strip (‘03-‘06, 2500/3500 & ‘02-‘05 1500)

If the tail lights in your truck stop working, it may not be the bulbs. Over time the contacts can get weak and they will not make good contact with the bulbs. Fix the problem with this replacement tail light strip. Sold individually.

LEFT OR RIGHT SIDE DRM923030: $15.95

REPLACEMENT CAB LIGHT KIT

Cab Light Kit, Grey ‘74-‘93 Ram, 150/250/350

Includes - 5 Lenses, 5 Base Housings, 5 Base Plate Gaskets, 5 Light Sockets, 5 Bulbs, & 10 Mounting Screws.

Main harness and drill template not included. Coming soon.

1G-CLK-G: $299.00

PLASTIC LENSE NUT, ‘03-‘09

Cab light lense 55077559AD for ‘03-‘09 trucks is the new updated style lamp with updated lense and gasket. You will need two of these plastic nuts per lense when replacing an older style lense with a foam gasket. Some trucks built after May 2006 may already have the updated lenses and plastic nuts.

Factory Service Manuals

One of our best selling items is the Haynes Repair Manual for the Dodge Ram pickups. The staff likens this manual to the “Cliff Notes” used by students in lieu of reading the entire book.

However, there are times when you need the detail of the Dodge Factory Service Manual (yes, the same one you can order out of the back of your Owner’s Manual). The factory service manual CD is the authoritative source for specifications, reuse, wiring, and diagnostics. Every Dodge Turbo Diesel owner who does their own maintenance should have the factory manual.

*For service manuals for trucks newer than the ‘06 year model, there is only one source: www.techauthority.com

Plug-All Vacuum & Fuel Stoppers An assortment of plugs and caps. Plugs fit 1/8”, 3/16”, 1/4”, 5/16”, 3/8” and 1/2” hoses. Tapered caps close tubes from 1/8” to 1/2”.

1-1/2” Needle Nose Grease Gun Adapter Used for greasing the front axle Cardan Joint.

Throttle Pedal Depressor Perfect for cold weather truck warm-up, the tool holds throttle at a constant rpm. Engage the nylon hook under the steering wheel. Then extend the depressor rod to the accelerator pedal. Use the adjustment screw to fine-tune the rpm level. Tool is 40” in overall length.

Circuit Tester Hook Tool Have you pricked your finger with one of those electrical probe tools? How about grounding out the wire you were testing? The spring loaded hook pulls the wire into the sharp probe. Perfect for hard-to-reach locations. No more pricked fingers.

Micro-V Heavy Duty Strap Wrench Originally developed to grasp and hold automotive belt driven pulleys such as fan clutch pulleys, but will also help hold other items as well. Made with a heavy duty aluminum handle and highly durable composite locking head. Strong nylon belt.

WIF Sensor Wrench (‘13-‘18, 6.7L) For use when replacing the fuel filter or when servicing the water sensor. The plastic sensor has a new hex design that is easily damaged by tools, like pliers, that do not specifically fit the sensor.

Dogbone Fuel Filter Cap Combo Wrench & WIF Sensor Wrench (‘13-‘18, 6.7L) As the description reads, this nifty tool is a “2fer.” The curved end gives you extra leverage and clearance on the hard-to-reach fuel filter cap. The straight end fits over the WIF sensor on the chassis-mounted fuel filter.

68RFE Transmission Filter Removal Tool, 65mm While this tool was developed for another application, we found that it is perfect for removing the spin-on transmission filter #5179267AD in the 68RFE transmission.

Billet Aluminum Oil Filter Removal Tool/Plug (‘13-‘23, 6.7L) Used to plug the oil filter when changing oil on ‘13‘23 Ram Cummins 2500/3500 Heavy Duty trucks. Threads into the filter for a secure seal so the filter can be removed or installed without spilling oil.

End Cap Oil Filter Wrench Cup design allows easy filter removal and installation from the end of LF5083285AA, LF16035 and LF3972 oil filters, even in tight locations. Use with 3/8” square drive. Important: match fluted end of the oil filter with the filter wrench to ensure you have the proper wrench size. ( NOTE: Ratchet is not included )

‘Big Range’ Oil Filter Strap Wrench Adjusts quickly to remove spin-on oil or fuel filters up to 6” in diameter. Use with 1/2” or 3/4” wrench. Strong nylon belt.

Oil Filter Plug (‘13-‘23, 6.7L) Used to plug the oil filter when changing oil on ‘13-‘23 Ram Cummins 2500/3500 Heavy Duty trucks. Threads into the filter for a secure seal so the filter can be removed or installed without spilling oil.

Billet Aluminum Oil Filter Removal Tool (‘89-‘23, 5.9L & 6.7L) Use this tool to remove the oil filter on Ram Cummins Turbo Diesel trucks. Use a 19mm/3/4” socket or wrench. Fits 93mm filters with 15 flutes (LF5083285AA, LF3972 and LF16035 ) LT-93MM-SOCKET $59.95

Ram 1500 EcoDiesel 27mm Low Profile Oil Filter Cap Socket (‘14-‘23, 3.0L)

Helps remove and install oil filters on ‘14-‘23 Ram 1500 EcoDiesel trucks.

Ram 1500 EcoDiesel Fuel Filter Removal Tool (‘14-‘19, 3.0L)

The wrench fits snugly on the bottom of the fuel filter canister and grabs the four tabs on the outside of it. Will not work on ‘20-up Ram 1500 EcoDiesel trucks. LT-ECO-FUEL-TOOL $59.95

28mm Fuel Filter Socket (‘10-‘23, 6.7L & ‘20-‘23, 1500 EcoDiesel ) Are you tired of busted nuts? Try our new no-slip 28mm fuel filter cap socket which has no slop in the socket-to-plastic raised hex. 3/8” drive, 6-point socket. Black hard-annodized for durabililty. Made in the U.S.A.

Fuel Filter Socket - Low Profile, 28mm (‘10-‘23, 6.7L & ‘20-‘23, 1500 EcoDiesel ) Helps remove and install the fuel filter canister on ‘10-23, 6.7L Cummins engines. Use the low profile, 3/8” drive, 28mm socket on the raised hex on the fuel filter housing.

Fuel Filter Socket, 29mm (‘00-‘07, 5.9L) Helps remove and install fuel filters on ‘00-‘07, 5.9L Cummins engines. Use the low profile, 3/8” drive, 29mm socket on the raised hex on the fuel filter housing.

DEF Tester Had a bottle of Diesel Exhaust Fluid sitting around for awhile? Nervous about putting it in your truck’s DEF tank? Check it first with this handy DEF tester.

Threaded Super Funnel Perfect for hands-free filling on threaded valve cover openings. This two-piece funnel can be used separately or threaded together for a long super funnel. The larger section screws into threaded oil filler openings found on many Dodge Ram trucks, holding the funnel upright for quick, mess free oil fills.

Jay’s EZ Funnel This multi-use funnel is perfect for all applications. Replace the lubricant cap with Jay’s EZ Funnel. Dispense the liquid using only Jay’s EZ Funnel or attach the flex tubing for hard to reach places. Place Jay’s EZ Funnel into the lubrication port (orifice). Gently squeeze the bottle to dispense the lubricant. When you have dispensed the desired amount of liquid, simply stop squeezing the bottle. The lubricant will retract.

E10 Torx Socket For external torx bolts on 11.8 differential cover used on ‘13-‘18 Ram trucks. 3/8” drive.

SCHLEY Common Rail Injector Puller (‘03-‘18, 6.7L & 5.9L) Instead of trying to pry or use vise grips to remove the injector from the cylinder head damaging it, use this tool to do it properly and get your core charge back.

SCH17200 $98.95

SCHLEY Flare Nut Wrench - 24mm The 24mm flare nut wrench is designed to fit into the confined area of the Cummins cylinder head and hold the 24mm fuel line flare nut while the 19mm fuel coupler nut is loosened. For use with ‘03-‘18 HPCR engines.

SCHLEY Injection Pump and Idle Lock Nut Wrench - 13mm (‘89-‘98, 12V) This offest wrench is designed to remove and install the 13mm injection pump mounting bolts and idle lock nuts found on the 5.9L engines.

CTA Fuel Injection Flare Nut Socket (3/4”) The area surrounding the injection pumps on ‘94-‘18, 5.9L and 6.7L engines is very difficult to access when removing the fuel supply lines. This tool is designed with a slim configuration and 1/2” drive to fit into this confined area.

Tork Tool Injection Pump Gear Puller (VE, P7100, VP44, CP3) Removing the gear from a Cummins VE, P7100, VP44 or CP3 injection pump requires a specialized tool and this tool from Tork Tool works great. Don’t risk damaging the pump by using a pry bar or similar tool.

SCH66150 $39.95

SCH89100 $36.95

CTA2220X19 $26.43

CGP020 $38.99

Tork Tool Injection Pump Gear Puller (VE, P7100, VP44) Removing the gear from a Cummins VE, P7100, or VP44 injection pump requires a specialized tool and this tool from Tork Tool works great. Don’t risk damaging the pump by using a pry bar or similar tool.

Tork Tool Injector Puller (‘89-‘98, 12V) Pulls Cummins injectors fast! This heavy-duty tool was designed to remove Cummins 6BT injectors without damaging the injector ball or indent groove in the head. This tool will remove even the most rusted injector.

Tork Tool Injector Puller (‘98-‘02, 24V) This heavy-duty tool was designed to make injector changing on a Cummins engine a simple project. The CIP040 features a thick wall tube and a custom washer that is machined to center on the tube. This automatically centers the tool over the injector body. CIP040

Common Rail Crossover Tube Remover (‘03-‘18, 5.9L & 6.7L) This tool is designed to be used on ‘03-‘18 Dodge Cummins Turbo Diesel trucks to make pulling the common rail connector tube an easier job.

Tork Tool Common Rail Crossover Tube Remover (‘03-‘18, 5.9L & 6.7L) This tool is designed to be used on ‘03-‘18 Dodge Cummins Turbo Diesel trucks to make pulling the common rail connector tube an easier job.

CTA2746 $10.70

CRCTR010 $19.49

Tork Tool Injector Crossover Tube Puller (‘98.5-‘02, 5.9L) This tool is made to be used on ‘98.5-‘02 Dodge Cummins Turbo Diesel trucks to make pulling the crossover tube an easier job. 24VCTR010

Fuel Rail Pressure Block Off Tool (‘07.5-‘18, 6.7L) Use this tool to block off fuel injector lines at the injection rail to help isolate a leaking or faulty fuel injector.

Fuel Rail Pressure Block Off Tool (‘03-‘07, 5.9L) Use this tool to block off fuel injector lines at the injection rail to help isolate a leaking or faulty fuel injector.

HPCR Fuel Pump Return Flow Test Kit (‘03-‘07, 5.9L) This kit allows you to check the operation of a rail pressure relief valve and check for excessive return fuel flow from the CP3 pump. The individual tools may also be used for tests specified in the manual. Kit includes: (1) 12mm & (1) 14mm test fitting, gaskets, fuel line and a 1000cc clear plastic beaker.

$18.75

LT-TESTCA2 $19.95

LT-TESTCA $19.95

GG-FPRKIT 44.95

Tork Tool 24-Valve Spring Compressor The Cummins Valve Spring Compressor features a tapered design that reduces the chance of losing a valve keeper. Included in the Tork Teknology kit are hex head bolts for the bridge, custom machined bridge, compressor plate, washer, flange nut and detailed instructions.

Tork Tool 12-Valve Spring Compressor Compress two valve springs at one time with this Cummins 12-valve spring compressor. This tool features tapered cones on the top plate which makes installation of the keepers super easy. You simply adjust the height of the plate, place a keeper on the ramp, and slide the keeper onto the valve stem.

Flat Band Hose Clamp This tool removes and installs flat band hose clamps used on heater and radiator hoses. Tips screw in and out to fit all clamp sizes. Ratcheting lock mechanism holds the clamp in an open position for each removal and installation. Tips can be switched to accommodate different applications. Offset jaws allow access in hard-to-reach areas.

CTA Front Cover Crankshaft Seal Tool, ‘89-‘22, 5.9L & 6.7L Use the correct tool and make the job of replacing a front cover crankshaft seal a one time deal.

CUMMINS

Cover

Seal Tool, ‘89-‘22, 5.9L & 6.7L Use the correct tool and make the job of replacing a front cover

job.

Scissor Disconnect Tool (5/16” and 3/8” Lines) Disconnnect tool for metal lines used on fuel and air conditioning lines with spring lock connectors. It makes disconnecting the lines a quick and easy job.

Fin Straightener Comb Set Clean and straighten condenser and evaporator coil fins with this tool. Includes 12 different size fin combs to cover almost any application. Comb 1: 8, 9, 10, 12, 14, 15 fins per inch. Comb 2: 10.5, 11, 13, 18, 20, 22 fins per inch.

Hose Remover Pliers For removal of 5/32” to 1/2” vacuum and fuel hoses. Engage the tube (line) with the black jaw. This sharpened jaw actually “DIGS” into the tube to grip it! Squeeze and the hose is easily pushed off by the silver jaw.

OTC Flexible Hose Clamp Pliers Use these pliers to remove hoses in those hard to reach places.

2-piece Hose Removal Hook Set Made for getting to those hard to remove hoses that are tucked between various fittings inlcuding heater and radiator hoses, seals and transmission lines. Set includes two hook tools. Each tool is roughly 8” long.

ROB18403 $17.95

LC47900 $9.95

OTC4525 $59.95

AST9502 $7.95

Oil Pressure Switch Socket Fits 1-1/16” oil pressure sending unit (gauge type), found on most all ‘87 and newer Chrysler vehicles with combination light and gauge oil pressure switches. Use with 3/8” drive ratchet.

Engine Barring Tool (‘89-‘23, 5.9L & 6.7L) Get this tool to turn the engine over when servicing the valves. Insert this metal barring tool into the flywheel housing to engage the flywheel ring gear. The engine can then be turned by hand using a 1/2-inch drive ratchet or breaker bar.

10mm Wrench This 10mm wrench has a 12-point box end and is a must use tool to remove the top bolt on the starter on the Dodge/Cummins Turbo Diesel 5.9L and 6.7L engines.

Quick Quad Brake Pad Spreader This tool can be used while the brake caliper is on the vehicle or hanging free. Works on single, double, quad and six piston calipers.

Brake Bleeder The kit has everything needed to bleed your brakes with no mess. The plastic bottle collects the fluid, and three adapters fit common bleeder screws.

Handy Bearing Packer Quickly flushes out old grease and repacks bearings with less mess. The Handy Packer works on bearings up to 3-1/2” OD. To pack a bearing, place the bearing on the piston. Press down on the cap until the old grease is forced out and the new grease shows on top of the bearing.

Brake/Hydraulic Clutch Fluid Tester Quickly determine the percentage of moisture in brake fluid or hydraulic clutch fluid. The tool uses red, yellow, and green indicator lights for easy readings. Includes a handy pocket clip and AAA battery. KTI70120 $47.95

GATES Serpentine Belt Guide Tool Works great when you’re installing a serpentine belt in a very narrow location with not a lot of room to maneuver the belt. GATES-91209 $19.95

Serpentine Belt Tension Tool Helps release the tension on spring loaded pulley tensioners in tight locations. Fits idler pulleys requiring 15mm, 16mm, or 18mm hex, and 3/8” or 1/2” square drive. Also includes 13mm, 14mm and 15mm crowfoot wrenches. WLMW84010

Pneumatic Fan Clutch Removal Set (‘89-‘23) Quickly removes and installs fan clutch. No holding wrench is necessary. Set includes 7 driving wrenches that fit your Ram Turbo Diesel truck and many other applications. Includes 7/8”, 32mm, 36mm, 40mm thin 47mm, 1-7/8”and 2” sizes. Use with an air hammer. Includes blow molded storage case.

Fan Clutch Removal Wrench Set (‘91.5-‘23, 5.9L & 6.7L) Make removing the fan clutch easier on your 1991.5-2023 Dodge Ram 5.9L and 6.7L Cummins trucks with these newly redesigned full-sized and heavy-duty wrenches made specifically for the job. The newer wrenches now have 17” long tapered handles. We designed this tool set in-house and have a local machine shop manufacture them to our specifications. The set comes unfinished but, if you prefer, you can use Krylon to paint them.

Four Specialty wrenches come in this set, as follows:

1) 36mm Turning Wrench for 1991.5-2012 5.9L and 6.7L Cummins

2) 1-7/8” Turning Wrench for 2013-Up 5.9L and 6.7L Cummins

3) Counter Holding Wrench - holds the heads on the fan pulley. For 2003-Up 5.9L and 6.7L Cummins

4) Counter Holding Wrench - holds the heads on the fan pulley. For 1991.5-2002 5.9L Cummins

7-Spade RV Connector Maintenance Kit The IPA-8028 kit cleans both the male and female sides of the 7-spade harness. The kit’s circuit tester has LED lights that show that the connection at the pin is good, giving you confidence to troubleshoot wiring or light bulbs on the trailer.

LC43300

$21.95

$149.95

GG-FC-WRENCHSET $58.95

IPA-8028 $46.95

46MM Drive Impact Socket (3/4” Drive - 6-point) For removing pitman arm on 2009 and up Ram trucks.

SUN446M $26.50

1-7/8” Drive Impact Socket (3/4” Drive - 6-point) For removing Dana 80 axle nut.

SUN460 $26.50

1-11/16”/43MM Drive Impact Socket (1/2” Drive - 6-point) Great socket for removing hub nuts.

CTA4145 $18.56

1-5/8” Drive Impact Socket (3/4” Drive - 6-point) For removing RWD axle nut on ‘94-‘02 Ram trucks.

Dodge Hub Remover Set Separates a frozen hub assembly from the steering knuckle. The tool drives on the bolt flange against loosened retaining bolts to separate assembly. Prevents damage to the knuckle and complete hub assembly. Tool drives on the bolt flange, so the head of the retaining bolt is not destroyed. Kit contains 39300 for older, smaller applications and 39250 for 2003-newer 4WD 3/4 ton and 1 ton pickups.

15/16” Impact Socket (3/4” Drive - 6-point) Use this socket to remove the lug nuts on your Dodge Ram truck. A great tool to keep in your Boonie Box.

Impact Socket Adapter (1/2” female × 3/4” male) This adapter allows you to use your 1/2” drive ratchet with the 3/4” impact sockets so you don’t have to buy an expensive 3/4” drive ratchet.

Hog Ring Pliers Instead of fighting with a regular set of pliers to install hog rings on a new seat cushion cover, make the job easier with a set of these hog ring pliers. They have an indentation that keeps the hog ring in place while squeezing it closed.

Jumps-A-Fuse (36” Pin tip probe w/alligator clip) Have you needed a way to turn on a circuit without turning on your truck? Keep this alligator clip/probe handy (tool box, glove box) and jump-a-fuse. Fantastic idea. (Why didn’t I think of that?) For more details see TDR 118, p. 108.

SUN452 $22.95

LC38210 $34.95

Plastic Fastener Remover Perfect for removal of door trim that is held in place with plastic fasteners. LC35400 $8.95

Emblem/Wheel Weight Remover This plastic pry tool has sharp edges designed to get under the emblem or wheel weight to make removal easy.

5 Pc. Fastener & Trim Remover Set All the tools you will need to remove interior and exterior trim on your truck. AST4505 $12.95

Battery Brush Cleans dirt and corrosion from battery terminals and cable clamps. The external brush cleans cable clamps and internal brush cleans terminal posts. Case is made of high impact plastic that will not weaken in cleaning solutions. LC11120 $7.95

15 3/4” Flexible Magnetic Pick Up Tool Reach into small tight places with this flexible magnetic tool. MLK702270 $18.95

Telescoping Magnetic Pocket Pick Up Adjustable telescoping action will extend from 4-1/2” to 16-1/4”. Super strong neodymium magnet picks up all ferrous metal objects up to 2 lbs.

$12.95

MLK282230 $14.50

‘Rapid Hitch’ aluminum Towing Hitch (up to 6” drop)

The Rapid Hitch tow bar system is the perfect hitch for anyone who tows multiple trailers. You can flip the double ball over, change the drop to a rise, or adjust the height of the drop all by simply removing the hitch pin and putting it back in place. With the easy height adjustment you can make sure you are keeping your trailer level. With the 2” and 2-5/16” ball combo, you cover most trailers on the road today. The 1-7/8” ball is available individually if desired. The various balls are easily changed by removing a hidden pin which attaches the ball to the ball housing. The aluminum Alumiball Combo Ball option is light and surprisingly strong. It only weighs 15 lbs. with the greaseless ball option making it easy to handle and adjust.

2-1/2” Receiver Hitch with Greaseless Alumiball Combo Ball (10,000/12,500 lb. GTWR; 1,500 lb. tongue ) RAPID-3405-25: $309.99

2-1/2” Receiver Hitch with Plated Steel Combo Ball (10,000/12,500 lb. GTWR; 1,500 lb. tongue ) RAPID-3410-25: $289.99

2” Receiver Hitch with Greaseless Alumiball Combo Ball (6,00 0 /8,000 lb. GTWR; 1,500 lb. tongue ) RAPID-3405: $266.99

Trailer-Aid® PLUS

TRAILER-AID: $59.95

2” Receiver Hitch with Plated Steel Combo Ball (8,00 0 /10,000 lb. GTWR; 1,500 lb. tongue ) RAPID-3410: $246.99

Trailer-Aid PLUS allows you to changea tandem axle trailer flat without the inconvenience of jacking up the trailer. Simply drive the good tire/wheel onto the Trailer-Aid and the height of the axle will be sufficient to change the bad tire.

3405-25 Shown

Spare ball assemblies and 2-pin lock kits available online.

CUMMINS

RAM

TS-FLAG

MED, LRG, XLRG: 16.95

2XLRG, 3XLRG: $19.95

Specify SIZE when ordering.

“SURE, MY TRUCK’S A HYBRID” T-Shirt

TS-HYBRID

MED, LRG, XLRG: 16.95

2XLRG 3XLRG: $19.95

Specify SIZE when ordering.

“LONG LIVE THE DIESEL TRUCK” T-Shirt

TS-LIVE

MED, LRG, XLRG: 14.95

2XLRG: $17.95

3XLRG: $19.95

Specify SIZE when ordering.

LONG LIVE THE DIESEL

TRUCK

cummins beach wash t-shirt

TS-1528267

MED, LRG, XLRG, 2XLRG & 3XLRG: $19.95

Specify

Vintage Label Beanie CAP-1433875: $10.95 Cozy poly-fleece lining with acrylic knit exterior.

Cummins Historic Tin Tacker Sign

SIGN-1445678: $17.95

Show that your mancave is powered by Cummins with this historic tin tacker sign. Made of lightweight tin metal, this fade resistant sign is die-cut in the shape of the historic Cummins Diesel logo.

Customize with your name!

CUSTOM YEAR ESTABLISHED SIGN

SIGN-GARAGE-CUSTOM: $64.95

Select Name and Year when ordering.

butter Beanie CAP-1528368: $14.95 Soft 100% acrylic.

sherpa Beanie CAP-1528371: $17.95 Warming folded sherpa cuff with acrylic crown.

cumminS FLEETGUARD 20 oz. stainless steel tumbler

MUG-FLEETGUARD: $28.95

‘Cummins C’ Decal

10” × 10” DECAL DECAL_CUMM: $9.00

6” × 6” DECAL

DECAL_SM_C: $6.00 Available in Black or White

Cummins Carabiner Key Fob

KEYCHAIN-C191205: $4.50

NOTE: Not for climbing.

Carabiner key holder with a split ring on strap. Black strap and white Cummins logo.

8G HOLSET TURBO USB

USB-1508542: $10.95

Custom USB data storage, made of pvc rubber and molded into the shape of a turbo charger.

Establish when you started working on your Ram Turbo Diesel truck or when your Man Cave opened for business with this custom metal sign with the Cummins logo on it. Geno’s shown for example. All signs come with “Garage” cutout at the bottom above the establish date.

Measures: 20-7/8” x 8-1/2”

TDR-GRILLE-BDG:

This double wall stainless steel tumbler looks like an LF16035 oil filter, but holds your favorite drink instead of oil.

Non-insulated

“STARTING FLUID” tumbler

GG-TUMBSF: $16.95

“Starting Fluid” 20 oz. stainless steel tumbler with Geno’s logo on the back. Acrylic screw on lid with a slider opening.

TDR ball Cap

BLACK WITH GRAY FLAME CAP-TDR-FLAME-87478: $14.95

2” TDR Grille Badge

$17.50

grille badge.

GRILLE FLAG BLUE T-Shirt