{' '} {' '}
Limited time offer
SAVE % on your upgrade.

Page 1

WINTER 2020 107

Political satire on the cover of a parts catalog...surely that is a recipe for a disaster. Nonetheless, the staff decided that is the theme we would use during this election year. So, here goes. Wish us luck.

So, did we discuss politics and not offend? So... How about a t-shirt or 3? We wanted to include all of our truck brothers, sisters and everything inbetween. Our popular catchall t-shirt design.

Our first attempt appeared in several of our advertisements.

Right Leaning? Left Leaning?

We worked our design team overtime to make sure we covered the old and the new. How do you like our Cummins 5.9 Evolution t-shirt?

Wait, stop with the politics. No matter which way you are leaning, left or right, we have a replacement seat cushion for your ass or elephant. (Oops, ‘94-‘19 Ram 1500-5500) Our Durofoam seat cushions will move you more towards the center. See page 50.

Call the Geno’s Folks

770-886-2500 genosgarage.com

RAM TURBO DIESEL PARTS AND ACCESSORIES

1500 • 2500 • 3500 • 4500 • 5500

Oops, don’t forget the Cummins 6.7 engine. Since 2007.5 this minority is now the majority, and is the First to 1000. (Four digits, wow!)

Thank you for your business and we look forward to a red, blue (and white) year of catalog covers.


WHICH CAB DOES MY TRUCK HAVE? REGULAR CAB - Built between 1989 and 2020, these trucks have 2 front doors with no rear seating area.

Belts & Hoses ............................................. 5, 6 Brakes & Rotors ............................................ 36 Brite Box ....................................................... 63 CB Mounts..................................................... 49 Cup Holders................................................... 49 Dash Kits & Covers................................... 45-47 Drain Plugs..................................................... 10 Drivetrain Parts ......................................... 16-19 Electrical Accessories .............................. 13, 45 Emblems ....................................................... 60 Engine Cooling.................................................14 Engine Parts and Accessories..................... 8-14 Exhaust Manifolds & Exhaust Tips .................. 15 Exterior Accessories................................. 57-60 Filters and Consumables............................... 3-7 Floormats ....................................................... 47 Fuel Caps....................................................... 58 Fuel Pumps, Fuel System Accessories...... 28-34 Gaskets........................................ 6-7, 10, 16, 18 Gauges, Gauge Mounts and Accessories ....................................... 42-45 Headlights, Tail Lights, Cab Lights and Turn Signal Lights............. 63-64 Interior Accessories.................................. 45-56 Mirrors........................................................... 62 Rebuild Kits and Replacement Parts ......... 20-27 Seat Covers, Cushions & Components....... 50-55 Service Manuals ........................................... 65 Shock Absorbers ........................................... 35 Specialty Tool Bin...................................... 66-70 Splash Guards ............................................... 59 Steering, Suspension................................ 37-41 Steps ............................................................ 60 T-Shirts, Caps, Decals, and Novelties ....... 71-72 Towing Accessories........................................ 61 Turbocharger Parts & Accessories................... 12 Underhood Accessories .............................. 8-13 ORDER/TECH

770-886-2500 Monday-Friday: 8:30AM to 5:30PM EST 1150 Samples Industrial Drive Cumming, GA 30041

EXTENDED CAB - Built between 1989 and 2002, these trucks have 2 front doors and a rear seat, but no rear doors. QUAD CAB - Built between 1998 and 2018, these trucks have 4 doors. Models built from ‘98-‘02, the rear doors face forward. Models built from ‘03-‘09, have 4 rear facing doors. 2009-2018 (1500 only.) Quad Cab with small rear doors. MEGA CAB - Built between 2006 and 2020, these 4 door trucks offer 22 inches of extra cab space, allowing seating for 6 with rear recliners. CREW CAB - Built between 2010 and 2020, these tucks have more seating space and a larger cargo bed compared to the 2009-2018 Quad Cab. CAB/CHASSIS - In 2007, a 3500 Cab/Chassis model was introduced followed in 2008 by 4500/5500 models that all share the same version of the 6.7L engine. The engine is different from the pickup 2500/3500 versions in that they have different emission systems, fuel tanks and suspension. These trucks are manufactured minus a pickup style bed and can be fitted with a variety of flat beds or boxes. (You will see that listed as C/C in our catalog.) ECODIESEL - Beginning in 2014, Ram has offered a 1500 truck with a 3.0L V-6 Turbo Diesel engine from VM Motori. QUICK TRUCK GENERATION REFERENCE GUIDE FIRST GENERATION 1989-1993 SECOND GENERATION 1994-2002 THIRD GENERATION 2003-2009 FOURTH GENERATION 2010-PRESENT

JOIN THE TURBO DIESEL REGISTER FOR MILLIONS OF MILES OF KNOWLEDGE A yearly subscription is $35.00 U.S. and $45 Canadian/ International. You can subscribe online, by mail, or by phone. ONLINE: www.tdr-online.com TURBO DIESEL REGISTER 1150 Samples Industrial Drive, Cumming, GA 30041 BY PHONE: Subscription line: (888) 440-8371 Note that the toll free subscription phone number is for subscription processing. Phone operators cannot answer technical questions. Throughout the catalog we’ve added a highlighted “H” and script that references the issue of the TDR magazine where you can find further explanation or a text write-up. Example H is for History; TDRXX for TDR Issue XX of the TDR magazine, p for the page in the magazine. We hope this data helps. I . This symbol indicates that installation instructions for the part are available at our website. V . When you see this, you will find an installation video available on that product’s page on our website.


‘07.5-‘18, 6.7L

‘07.5-‘18, 6.7L

EGRKIT-1:  $126.95

EGRKIT-2:  $49.95

with Crankcase Vent Filter

‘13-‘18, 3500/4500/5500 CAB/CHASSIS EGR3-A (Filter):  $129.95

without Crankcase Vent Filter

Using your trusty Owner’s Manual you may have noted that changing-out the crankcase vent filter (CCV) is a required service at the 67,500 mile interval. Further, for those 2007.5-2012, 2500/3500 pickup truck owners [the non-diesel exhaust fluid (DEF) style aftertreatment] there is also a “clean the exhaust gas recirculation (EGR) valve and cooler service” required. The ‘07.5-Current Cab and Chassis trucks and ‘13-Current 2500/3500 use the DEF exhaust aftertreatment. Looking closely at their Owner’s Manuals reveals that a CCV filter change is also required at 67,500 miles, However, the cleaning of the EGR valve and EGR cooler is not a requirement. We asked the folks at Cummins and they responded that you may wish to include the cleaning, but it is typically not needed until the second crankcase vent filter change. They did suggest an inspection of the EGR valve. “Sooty/dusty is good, shellac/ crusty needs to be cleaned.” If the valve is shellac/crusty, don’t skimp, go ahead and do the entire EGR system cleaning. If you price the EGR Cleaning Kit parts over-the-counter at Mopar the cost is over $250 plus $40 for the cleaning solution. We would suggest using the Cummins equivalent parts for the gaskets and filter that are needed. We would suggest using Simple Green (it smells just like the Mopar cleaner) or Purple Power as your cleaning solution. Our revised 6.7L EGR Cleaning Kit contains the following: (1) Large Exhaust Manifold Gasket • (2) EGR Valve Gaskets • (1) EGR Butterfly Gasket • (1) ‘13-‘18 Exhaust Manifold Gasket or (1) ‘07.5-‘12 Exhaust Manifold Gasket (4) EGR Plumbing Gaskets • (1) Airhorn Gasket • (2) Rubber Plugs • (3) Coolant O-rings Freddie knows that if you are going to spend time cleaning the EGR valve and EGR cooler, that you’ll remove and clean the intake air horn that the EGR valve is bolted to. The replacement gasket for air horn-to-intake manifold is 5264566 and it is included in our EGR Cleaning Kit. Additionally our kit has thorough instructions for removal of the parts and tips on best method(s) for cleaning. Finally, Freddie Frugal adds two rubber plugs for the ends of your cooler assembly so you don’t waste cleaning fluid. Fill up the cooler, cap it off, and soak it overnight. Use the caps to shake the cooler with the cleaner inside.

Filter Maintenance Kits ‘19-‘20, 6.7L MK2019: $250.00 (4) LF16035; (2) FS_MOP68157291 (2) FS_MOP68436631AA; No Air Filter

‘13-‘18, 6.7L MK2013: $259.00 (4) LF16035; (2) FSMOP68157291 (2) FS_MOP68197867; No Air Filter

FILTERS, BELTS, HOSES & CONSUMABLES

6.7L EGR Cleaning KitS

‘10-‘18, 6.7L MK2010N: $158.00 (4) LF16035; (2) FS_MOP68157291; No Frame Filter or Air Filter

‘07.5-‘09, 6.7L MK2007: $133.00 (4) LF16035; (2) FS43258; No Air Filter

‘03-‘07, 5.9L MK2003: $88.00 (4) LF16035; (2) FS19856; No Air Filter

‘00-‘02, 5.9L MK12626: $108.00 (4) LF16035; (2) FS19855; (1) AF-4189 All Maintenance Kits use the Fleetguard StrataPore oil filter and either a Fleetguard, Mopar or Racor branded fuel filter (same filter, but we offer you the less expensive item). Also, the kits offer either a Fleetguard or a delete of the air filter element. We took time to analyze the filter purchasing quantities of our customers. Predictably, in a given maintenance interval (i.e. a 30,000 mile period), the oil filter is changed four times, the fuel filter two times, and the air cleaner is changed once. We’re pleased to offer this common-sense idea in a prepackaged filter maintenance kit for your Ram Cummins Diesel truck.

‘97-‘99, 5.9L MK12627: $119.00 (4) LF16035; (2) FS19598; (1) AF-4189

‘94-‘96, 5.9L MK12628: $113.00 (4) LF16035; (2) FS1253; (1) AF-4189

‘89-‘93, 5.9L MK12625: $86.00 (4) LF16035; (2) FS1232; No Air Filter

OIL FILTERS

5083285AA: $10.95

MOPAR - Oil Filter  (‘94-‘20) Fits 2500/3500/4500/5500 trucks. FLEETGUARD - Oil/StrataPore  (‘89-‘20, 5.9L & 6.7L) This filter can be used on ALL ‘89-‘19 Turbo Diesel engines. 

The advantage of this filter is the fluted can which simplifies removal from underneath using the Lisle End Cap Filter Wrench (#LC61580).  FLEETGUARD - Oil/Standard  (‘89-‘20, 5.9L & 6.7L) This filter can be used on ALL ‘89-‘19 Turbo Diesel engines.

The advantage of this filter is the fluted can which simplifies removal from underneath using the Lisle End Cap Filter Wrench (#LC61580). 

LF16035: $14.95

H TDR71, p60-69

LF3972: $8.95 LF68498720AA: $74.95

MOPAR - EcoDiesel V6 Replacement Oil Filter Cartridge  (‘20, Ram 1500 EcoDiesel 3.0L)

LF68229402: $58.95

MOPAR - EcoDiesel V6 Replacement Oil Filter Cartridge  (‘14-‘18, Ram 1500 EcoDiesel 3.0L) FLEETGUARD - Oil Sampling Kit  Monitor engine oil. (Includes sample collection bottle, instructions and analysis of sample.)­

Catalog good through April 2020 l Prices subject to change without notice.

H TDR71, p60-69

CC2543: $26.00

Order 770-886-2500 or genosgarage.com 

l3


FILTERS, BELTS, HOSES & CONSUMABLES

AIR FILTERS

AF-53034051AB: $26.95

MOPAR - Air Filter  (‘07.5-‘20, 6.7L)

AF-27684: $28.25

FLEETGUARD - Air Filter  (‘07.5-‘20, 6.7L)

AF-53034249AA: $25.95

MOPAR - Air Filter  (‘03-‘07, 5.9L) FLEETGUARD - Air Filter  (‘03-‘07, 5.9L)  New design without foam front.

AF-4177: $18.95

FLEETGUARD - Air Filter  (‘03-‘07, 5.9L)  Original design with foam front. Limited supply.

AF-26106: $16.95

FLEETGUARD - Air Filter  (‘94-‘02, 5.9L)  Supersedes AF-25541

AF-4189: $20.95

FLEETGUARD - Air Filter  (‘94-‘02, 5.9L)  Original air filter. Limited supply.

AF-25541: $23.95

FLEETGUARD - Air Filter  (‘93, 5.9L)

AF-25023: $33.25

FLEETGUARD - Air Filter  (‘89-‘92, 5.9L)

AF-4555M: $31.95 AF-68441763AA: $35.95

MOPAR - EcoDiesel V6 Air Filter  (‘20, Ram 1500 EcoDiesel 3.0L)

AF-68190705: $34.95

MOPAR - EcoDiesel V6 Air Filter  (‘14-‘18, Ram 1500 EcoDiesel 3.0L)

FUEL FILTERS MOPAR - Fuel/Water Separator (Chassis Mounted)  (‘19-‘20, 6.7L) 2500/3500  10 micron (also fits ‘20 EcoDiesel 1500 trucks.) FLEETGUARD - Fuel/Water Separator (Chassis Mounted)  (‘13-‘18, 6.7L) 2500/3500/4500/5500

If purchasing fuel filters for your ‘10-‘12 truck, we recommend the NanoNet filters.

RACOR - Fuel/Water Separator (Chassis Mounted)  (‘13-‘18, 6.7L) 2500/3500/4500/5500

FS_68436631AA: $48.95 FS20089: $57.95 PFF54529: $44.95

MOPAR - Fuel/Water Separator (Chassis Mounted)  (‘13-‘18, 6.7L) 2500/3500/4500/5500       H TDR80, p63

FS_MOP68197867: $52.95

MOPAR - Nanonet Fuel Filter  (‘10-‘20, 6.7L)  3 micron

FS_MOP68157291: $52.95 FS53000: $69.95

FLEETGUARD - Nanonet Fuel Filter  (‘10-‘20, 6.7L)  3 micron MOPAR - Severe Duty Fuel Filter  (‘04.5-‘12, 6.7L & 5.9L)  For MOPAR add-on severe duty filtration kit.  Replaces 68083826AA.

68083823AA: $39.95 FS_MOP68065608: $48.95

MOPAR - Fuel Filter  (‘10-‘12, 6.7L)  5 micron

FS43255: $54.95

FLEETGUARD - Fuel Filter  (‘10-‘12, 6.7L)  (5 micron)

FS43257: $52.95

FLEETGUARD - Fuel Filter  (‘07.5-‘09, 6.7L) 5 Micron - Filter and shell. FS2 design.

FS_MOP68061633: $69.95

MOPAR - Fuel Filter  (‘07.5-‘09, 6.7L) 5 Micron - Filter and shell. FS design. 2

FS43258: $39.95

FLEETGUARD - Fuel Filter  (‘07.5-‘09, 6.7L) 5 Micron - Filter only. FS design. 2

FS_MOP68061634: $59.95

MOPAR - Fuel Filter  (‘07.5-‘09, 6.7L) 5 Micron - Filter only. FS design 2

MOPAR - Fuel Filter  (‘03-‘07, 5.9L) 7 Micron  NEW!

FS_MOP68001914AB: $28.95

FLEETGUARD - Fuel Filter  (‘03-‘07, 5.9L) 7 Micron

FS19856: $15.95

FLEETGUARD - Fuel Filter  (‘00-‘02, 5.9L) 10 Micron

FS19855: $15.95

FLEETGUARD - Fuel Filter  (‘97-‘99, 5.9L) FLEETGUARD - Fuel Filter (‘94-‘96) (Also for Prime-Loc on 12-valve engines, ‘94-‘98)

Buy 6 oil or fuel filters and save 5% on the purchase price.

FS19598: $21.95 FS1253: $18.95

FLEETGUARD - Fuel Filter (‘89-‘93) Does not use Water/Fuel sensor.

FS1251: $12.95

FLEETGUARD - Fuel Filter (‘89-‘93) Requires Water/Fuel sensor.

FS1232: $14.95

FLEETGUARD - Fuel Filter For Prime-Loc on 24-valve engines up to 2002

FS19519: $20.95

MOPAR - EcoDiesel V6 Fuel Filter    (‘14-‘18, Ram 1500 EcoDiesel 3.0L)  3 micron V

FS_MOP68235275: $38.95

TRANSMISSION FILTERS

MOP-68224232: $75.95

MOPAR - Transmission Filter, Aisin AS69RC (‘13-‘20) MOPAR - Replacement Transmission Sump Filter, 68RFE (2WD)  (‘07.5-‘09, 6.7L)

This transmission pan does not require a gasket. Use RTV silicone or sealant only.

MOPAR - Replacement Transmission Sump Filter, (68RFE and Mag-Hytec pan)  (‘07.5-‘20, 4WD) & (‘10-‘20, 2WD)

with 6.7L engine. This transmission pan does not require a gasket. Use RTV silicone or sealant only.

MOPAR - RTV Sealer, Recommended for 68RFE (4WD and 2WD)  (‘07.5-‘20, 6.7L)  NEW! MOPAR - Replacement Transmission Screw-On Filter, 68RFE (4WD and 2WD)  (‘07.5-‘20, 6.7L) MOPAR - Replacement Transmission Sump Filter, Aisin AS68RC 6-speed Auto (4WD and 2WD)  (‘07.5-‘12, 6.7L)

MOP-5015267: $36.95 MOP-5013470: $34.95 MOP-05010884AD: $6.95 MOP-5179267: $22.95 MOP-68019688: $98.95

MOPAR - Transmission Filter and Gasket Replacement Kit (‘98-‘07)

MOP-KIT-52118789: $34.95

MOPAR - Transmission Filter and Gasket Replacement Kit (‘89-‘97)

MOP-KIT-3515996: $23.95

MOPAR - Transmission Filter ONLY (‘98-‘07)

MOP-52118789: $21.95

MOPAR - Transmission Filter ONLY (‘89-‘97)

MOP-3515996: $10.95

MOPAR - EcoDiesel Transmission Service Kit  (‘14-‘20, 3.0L)  Ram 1500

4 l Ram Turbo Diesel Parts & Accessories  #107

MOP68225344: $164.95

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


MOPAR - Upper Radiator Inlet Hose  (‘15-‘18, 6.7L)

MOP-68227796: $56.10

MOPAR - Upper Secondary Inlet Hose (Dual Alternator)  (‘14, 6.7L)

MOP-68224266: $53.95

MOPAR - Upper Inlet Hose  (‘13-‘14, 6.7L)

MOP-52014722: $58.83

MOPAR - Upper Secondary Inlet Hose  (‘13-‘14, 6.7L)

MOP-68166469: $34.95

MOPAR - Upper Radiator Inlet Hose  (‘10-‘12, 6.7L)  Clamps included.

MOP-55056954AB: $21.95

MOPAR - Upper Radiator Inlet Hose  (‘03-‘09, 6.7L)  One clamp included.

MOP-52028872AG: $26.95

MOPAR - Upper Radiator Inlet Hose  (‘98.5-‘02, 24V) No clamps included.

MOP-52028715: $30.95

MOPAR - Upper Radiator Inlet Hose  (‘94-‘98, 12V) No clamps included.

MOP-52028542: $32.95

GATES - Upper Radiator Hose  (‘10-‘12, 6.7L)

GATES-23955: $14.95

GATES - Upper Radiator Hose  (‘03-‘09, 5.9L & 6.7L)

GATES-22892: $15.95

GATES - Upper Radiator Hose  (‘98.5-‘02, 5.9L, 24V)

GATES-22645: $18.95

GATES - Upper Radiator Hose  (‘94-‘98, 5.9L, 12V)

GATES-22081: $18.95

GATES - Upper Radiator Hose  (‘91.5-‘93) Intercooled

GATES-21930: $14.95

GATES - Upper Radiator Hose  (‘89-‘91) Non-Intercooled

GATES-20957: $9.95

MOPAR - Lower Outlet Hose  (‘15-‘18, 6.7L)

MOP-68227797: $23.95

MOPAR - Lower Outlet Hose  (‘13-‘14, 6.7L)

MOP-52014723: $20.00

MOPAR - Lower Secondary Outlet Hose  (‘13-‘14, 6.7L)

MOP-68166470: $30.29

MOPAR - Lower Outlet Hose  (‘10-‘12, 6.7L)  Clamps included.

MOP-55056955AA: $20.95

MOPAR - Lower Outlet Hose  (‘03-‘09, 6.7L)  Clamps included.

MOP-55056945AE: $38.95

MOPAR - Lower Outlet Hose  (‘94-‘02, 5.9L) No clamps included.

MOP-52006482AB: $30.95

GATES - Lower Radiator Hose  (‘10-‘12, 6.7L)

GATES-23956: $12.95

GATES - Lower Radiator Hose  (‘03-‘09, 5.9L & 6.7L)

GATES-22893: $16.95

GATES - Lower Radiator Hose  (‘94-‘02)

GATES-22082: $14.95

GATES - Lower Radiator Hose  (‘89-‘93) Intercooled

GATES-20431: $13.95

GATES - 5/8” Molded Heater Hose - Heater Inlet  (‘11-‘18, 6.7L)  Cut to fit application.

GATES-23957: $18.95

GATES - 5/8” Molded Heater Hose - Heater Outlet  (‘11-‘12, 6.7L)  Cut to fit application.

GATES-18641: $4.95

GATES - 5/8” Molded Heater Hose - Heater Outlet  (‘07.5-‘10, 6.7L)  Cut to fit application.

GATES-18710: $8.25

GATES - 5/8” Molded Heater Hose - Heater Inlet  (‘07.5-‘10, 6.7L)  Cut to fit application.

GATES-18774: $9.00

GATES - 5/8” Molded Heater Hose - Heater to Pipe 1  (‘03-‘07, 5.9L)  Cut to fit application.

GATES-19168: $12.75

GATES - 5/8” Molded Heater Hose - Heater to Pipe 2  (‘03-‘07, 5.9L)  Cut to fit application.

GATES-19213: $6.95

GATES - 5/8” x 16” Molded 90° Heater Hose  (‘98.5-‘02, 24V)  Cut to fit application.

GATES-28467: $8.50

GATES - 9/32” Molded Coolant Bypass Heater Hose  (‘94-‘98, 12V)  Cut to fit application.

GATES-18124: $5.50

GATES - 5/8” Molded 90° Coolant Hose  (‘89-‘98, 12V & ‘98.5-‘02, 24V)  Cut to fit application.

GATES-20338: $4.95

MOPAR - 3.25” Upper Cabin Heater Hose  (‘06-‘07, 5.9L)  Find clamps on page 25.

05179114AB: $19.95

MOPAR - 2.5” Lower Cabin Heater Hose  (‘03-‘07, 5.9L)  Find clamps on page 25.

05086822AB: $13.50

CUMMINS - 3” Silicone Upper Cabin Heater Hose  (‘03-‘05)  Find clamps on page 25.

3820663: $24.95

GATES - 5/8” Straight Standard Heater Hose  (‘98.5-‘02, 24V & ‘89-‘98, 12V) Cut to fit application.

GATES-28411: $1.45/ft.

GATES - 5/8” Straight Silicone Heater Hose  (‘89-‘94, 12V)  Cut to fit application.

GATES-26241: $6.75/ft.

GATES - EcoDiesel Upper Radiator Hose  (‘14-‘18, Ram 1500 EcoDiesel 3.0L)

GATES-24275: $20.95

MOPAR - EcoDiesel Upper Radiator Hose  (‘14-‘18, Ram 1500 EcoDiesel 3.0L)

MOP-52014952: $29.95

MOPAR - EcoDiesel Lower Radiator Hose  (‘14-‘18, Ram 1500 EcoDiesel 3.0L)

MOP-52014953: $44.74

GATES - EcoDiesel Engine to Reservoir Hose  (‘14-‘18, Ram 1500 EcoDiesel 3.0L)

GATES-12091: $15.50

GATES - EcoDiesel Molded Heater Hose - Heater Control Valve to Engine  (‘14-‘18, Ram 1500 EcoDiesel 3.0L)

GATES-12088: $17.95

Catalog good through April 2020 l Prices subject to change without notice.

FILTERS, BELTS, HOSES & CONSUMABLES

RADIATOR HOSES & HEATER HOSES

Order 770-886-2500 or genosgarage.com 

l5


FILTERS, BELTS, HOSES & CONSUMABLES

SERPENTINE BELTS MOPAR - Serpentine Belt (Dual Alternator)  (‘13 -‘18, 6.7L)

MOP-4627589: $119.95

MOPAR - Serpentine Belt (Single Alternator)  (‘13 -‘18, 6.7L)

MOP-4627751: $42.36

MOPAR - Serpentine Belt (Single Alternator)  (‘03 -‘12, 6.7L)

MOP-53041138AE: $69.95

MOPAR - Serpentine Belt (Single Alternator)  (‘94 -‘02, 5.9L)

MOP-53040171AD: $42.95

GATES - HD Serpentine Belt (A/C & Dual Alternator)  (‘13-‘18, 6.7L)  Also fits ‘03-‘07 with Jacobs brake

GATES-K081298HD: $62.95

GATES - Serpentine Belt (A/C & Single Alternator)  (‘13-‘18, 6.7L)

GATES-K081243HD: $29.95

GATES - HD Serpentine Belt (assumes A/C)  (‘03-‘12, 5.9L & 6.7L)  See Accessory Drive Belt Kits, page 26 & 27.

GATES-K081264HD: $43.95 GATES-K081102: $26.95

GATES - Serpentine Belt (non-A/C)  (‘03-‘09)

BELT-3947077: $72.95

CUMMINS - Serpentine Belt (assumes A/C)  (‘03-‘07, 5.9L) with Jacobs Brake GATES - HD Serpentine Belt (assumes A/C)  (‘94-‘02)  See Accessory Drive Belt Kits, page 23.

GATES-K080810HD: $29.95 GATES-K080653: $23.95

GATES - Serpentine Belt (non-A/C)  (‘94-‘02)

GATES-K080830HD: $38.95

GATES - HD Serpentine Belt (assumes A/C)  (‘91.5-‘93) Intercooled

GATES-K080635: $28.95

GATES - Serpentine Belt (non-A/C)  (‘91.5-‘93) Intercooled

GATES-K080816HD: $35.95

GATES - HD Serpentine Belt (assumes A/C)  (‘89-‘91) Non-intercooled

GATES-K080645: $20.95

GATES - Serpentine Belt (non-A/C)  (‘89-‘18) Non-intercooled & no air-conditioning

MOP-4627897: $23.40

MOPAR - EcoDiesel Serpentine Belt (‘14-‘18, 3.0L) Ram 1500 EcoDiesel

GATES-KO60812HD: $17.95

GATES - EcoDiesel HD Serpentine Belt (‘14-‘18, 3.0L) Ram 1500 EcoDiesel

GASKETS & SEALS CUMMINS Upper Engine Gasket Kit  (‘07.5-‘12, 6.7L)

Upper engine gasket kits include a standard thickness head gasket.

CUMMINS Upper Engine Gasket Kit  (‘03-‘07, 5.9L) CUMMINS Upper Engine Gasket Kit  (‘98.5-‘02, 5.9L 24V)

4955354: $435.00 4089819: $379.95 4090035: $250.00

CUMMINS Upper Engine Gasket Kit  (‘89-‘98, 5.9L 12V)

4089649: $359.00

CUMMINS Lower Engine Gasket Kit  (‘07.5-‘10, 6.7L)

4955355: $114.95

CUMMINS Lower Engine Gasket Kit  (‘03-‘07, 5.9L)

Please check our website for all gasket kit contents.

CUMMINS Lower Engine Gasket Kit  (‘98.5-‘02, 5.9L 24V)

4089173: $214.95 3800487-01: $312.00 3802376-01: $295.00

CUMMINS Lower Engine Gasket Kit (‘89-‘98, 5.9L,12V) CUMMINS Rear Main Seal Cover Gasket (‘03-‘20)

3957492: $6.50

CUMMINS Rear Main Seal Cover Gasket (‘89-‘02)

4947667: $8.95

CUMMINS Rear Crank Seal  (‘89-‘20, 5.9L & 6.7L) Above rear main seal gasket required when replacing rear crank seal.

5405392: $28.95

CUMMINS Front Cover Crank Seal  (‘07.5-‘20, 6.7L)

4931561: $12.95

CUMMINS Front Cover Crank Seal with Repair Sleeve  (‘89-‘18, 5.9L & 6.7L)  NEW!

3802820: $118.95

FELPRO Front Cover Crank Seal Repair Sleeve  (‘89-‘13, 5.9L & 6.7L)  Works with stock crank seal #3937111.

GG-16219: $8.95

CUMMINS Front Cover Crank Seal  (‘89-‘07, 5.9L)

3937111: $40.95

CUMMINS Crankcase Breather Gasket  (‘07.5-‘20, 6.7L)

3999820: $12.50

CUMMINS Replacement Oil Cap O-ring (‘98.5-‘20)

3973512: $3.95

CUMMINS Valve Cover Gasket  (‘06-‘20, 5.9L & 6.7 L)

5367847: $142.95

MSI Valve Cover Gasket (‘03-‘05, 5.9L) MSI

MSI6511: $29.95

CUMMINS Valve Cover Gasket  (‘03-‘05, 5.9L)

3954324: $45.95

MSI Valve Cover Gasket (‘98.5-‘02, 5.9L) MSI

MSI6516: $39.95

MSI Valve Cover Gasket  (‘89-‘98, 5.9L 12V) Requires 6 gaskets for installation.

MSI7335: $4.95

CUMMINS Valve Cover Bolt Rubber Seal Isolator & Washer  (‘06-‘18, 5.9L & 6.7L) Requires 6 seals for installation.

3973853: $8.95

CUMMINS Valve Cover Bolt Rubber Seal Isolator, Bolt & Washer  (‘04.5-‘05, 5.9L 24V) Requires 6 seals for installation.

3957203: $7.95

CUMMINS Valve Cover Bolt Rubber Seal Isolator & Washer  (‘98.5-‘02, 5.9L 24V) Requires 5 seals for installation.

3942659: $6.50

CUMMINS Valve Cover O-ring  (‘03-‘04, 5.9L 24V) For valve cover bolts. Requires (6) O-rings for installation.

3087740: $1.75

CUMMINS Valve Cover O-ring  (‘89-‘98, 5.9L 12V) For valve cover bolts. Requires (6) O-rings for installation.

3910824: $2.50

CUMMINS Valve Cover Breather O-ring  (‘03-‘05, 5.9L 24V)

3073966: $9.95

CUMMINS Valve Cover Rubber Seal  (‘89-‘98, 5.9L 12V) For valve cover bolts and replaces original O-rings. Requires (6) seals for installation.

3935449: $2.95

6 l Ram Turbo Diesel Parts & Accessories  #107

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


MSI Lower Valve Cover Rocker Assembly Gasket  (‘03-‘20, 5.9L & 6.7L)

MSI6508: $8.95

CUMMINS Lower Valve Cover Rocker Assembly Gasket  (‘03-‘20, 5.9L & 6.7L)

3963379: $22.95

MSI Side Cover Gasket (Pushrod Cover)  (‘89-‘02, 5.9L)

MSI7710: $9.95

CUMMINS Engine Gear Cover Gasket  (‘94-‘02, 5.9L)

3918673: $42.95

CUMMINS Engine Gear Cover Gasket  (‘89-‘93, 5.9L)

3914385: $30.95

CUMMINS Engine Front Cover Gear Housing to Block Gasket  (‘03-‘20, 5.9L & 6.7L)

5341995: $16.95

CUMMINS Engine Front Cover Gear Housing to Block Gasket  (‘89-‘02, 5.9L)

3938156: $28.95

CUMMINS Intake Plenum Gasket  (‘03-‘20, 5.9L & 6.7L)

3947530: $16.95

CUMMINS Intake Plenum Gasket  (‘89-‘02, 5.9L)

3938152: $16.95

CUMMINS Throttle Valve Body to Air Horn Gasket  (‘07.5-‘20, 6.7L)

4933235: $4.50

CUMMINS Intake Air Horn Replacement Gasket  (‘07.5-‘18, 6.7L)  Requires 1 gasket for installation.

5264566: $4.150

CUMMINS Intake Air Horn Replacement Gasket  (‘89-‘07, 5.9L)  NOTE: ‘89-‘98 12V requires (1) gasket; ‘98.5-‘07 requires (2) gaskets.

3969988: $6.00

CUMMINS EGR Valve Gasket (‘07.5-‘20, 6.7L)  Requires 2 gaskets for installation. Sold individually.

3979769: $2.95

CUMMINS Exhaust Manifold Gasket  (‘98.5-‘20, 5.9L & 6.7L)  Requires 6 gaskets for installation. Sold individually.

5447591: $6.50

CUMMINS Exhaust Manifold Gasket  (‘89-‘98, 5.9L 12V)  Requires 6 gaskets for installation. Sold individually.

3927154: $6.95

MOPAR Exhaust to Turbo Gasket  (‘07.5-‘18, 6.7L)

68071676AA: $11.43

CUMMINS Turbo to Exhaust Manifold Gasket  (‘13-‘18, 6.7L)

5266419: $27.95

CUMMINS Turbo to Exhaust Manifold Gasket  (‘07.5-‘12, 6.7L)

5260648: $10.50

CUMMINS Turbo to Exhaust Manifold Gasket  (‘03-‘07, 5.9L)

3949530: $5.95

CUMMINS Turbo to Exhaust Manifold Gasket  (‘89-‘02, 5.9L)

3901356: $5.25

CUMMINS HX35 Turbo Housing to Turbo Elbow - 5-bolt gasket (5.9L)

3535001: $6.95

CUMMINS T4 Undivided Turbo Flange Gasket (5.9L)

3755843: $6.95

MOPAR Turbo Oil Drain Gasket  (‘13-‘20, 6.7L)

05183354AB: $6.50

CUMMINS Turbo Oil Drain Gasket  (‘03-‘12, 5.9L & 6.7L)

5264568: $3.50

CUMMINS Turbo Oil Drain Gasket  (‘89-‘02, 5.9L)

5264569: $3.95

CUMMINS Turbo Oil Drain O-ring  (‘07.5-‘20, 6.7L)  Fits nipple pressed into the engine block. 2 required per application.

3928624: $3.95

CUMMINS Turbo Oil Drain O-ring  (‘94-‘07, 5.9L)  Fits nipple pressed into the engine block. 1 required per application.

3931824: $3.95

CUMMINS Turbo Coolant Line Sealing Washer  (‘07.5-‘20, 6.7L)

3963991: $5.50

CUMMINS Oil Cooler to Engine Block Gasket  (‘07.5-‘20, 6.7L)

2830559: $11.95

CUMMINS Oil Cooler to Oil Filter Head Gasket  (‘07.5-‘20, 6.7L)

3974127: $10.95

CUMMINS Oil Cooler to Engine Block Gasket  (‘03-‘07, 5.9L)

4895742: $23.95

CUMMINS Oil Cooler to Oil Filter Head Gasket  (‘03-‘07, 5.9L)

3864458: $16.95

CUMMINS Oil Cooler to Engine Block Gasket  (‘89-‘02, 5.9L)

4932124: $31.95

CUMMINS Oil Cooler to Oil Filter Head Gasket  (‘97-‘02, 5.9L 12V & 24V)

3942915: $17.95

CUMMINS Oil Cooler to Oil Filter Head Gasket  (‘89-‘96, 5.9L 12V)

3929792: $18.95

MOPAR Transfer Pump to Fuel Cannister O-ring  (‘03-‘04)

5114437AA: $5.50

CUMMINS VP44 Pump to Gear Case O-ring  (‘98.5-‘02)

3935032: $3.95

CUMMINS Fuel Pre-Heater and Lift Pump Gasket  (‘89-‘98, 5.9L)

3939258: $4.95

CUMMINS Fuel Pre-Heater Upper Gasket  (‘94-‘98, 5.9L)

3834185-S: $2.95

MOPAR EcoDiesel Intake Manifold Gasket Kit  (‘14-‘18, 3.0L)

68148135AA: $79.95

MOPAR EcoDiesel Intake Manifold Side Gasket  (‘14-‘18, 3.0L)

68211212AA: $8.95

MOPAR EcoDiesel Throttle Body to Intake Gasket  (‘14-‘18, 3.0L)

68148127AA: $25.95

MOPAR EcoDiesel Engine Oil Drain Plug Gasket  (‘14-‘18, 3.0L)

68211183AA: $12.95

Catalog good through April 2020 l Prices subject to change without notice.

FILTERS, BELTS, HOSES & CONSUMABLES

GASKETS & SEALS

Order 770-886-2500 or genosgarage.com 

l7


ENGINE PARTS & UNDERHOOD PARTS/ACCESSORIES

2010-2012

nylon 24” X 24” reen sc mesh bug ith each included w Guard r Condense NOTE: Grille must be removed to install the Winter Front on ‘10-‘12 trucks.

2003-2009 Shown uncoated for clarity.

A/C CONDENSER/INTERCOOLER Guard, ‘13-’18

‘13-‘18, 6.7L CONDENSER/INTERCOOLER GUARD KIT  GG-CD-IC4G:  $85.95 (Includes (1) WD_COND_GR_13 and (1) GG-ICGUARD)

‘13-‘18, 6.7L INTERCOOLER GUARD GG-ICGUARD:  $45.95

The intercooler in the ‘13-‘18 trucks is now located beneath the radiator rather than behind like the ‘10-‘12 trucks. This guard is similar to our condensor guard and protects the intercooler from damage by road debris. If you already have the A/C condenser guard in your truck, you can add the intercooler guard.

1994-2002

Save when you buy the condenser and intercooler guard together!

1994-2002

nylon 24” X 24” reen sc g bu h es m ith each included w Guard r Condense

CoverCraft Winter Front  I

‘10-‘12 ‘03-‘09 ‘94-‘02 WINTER_FR_10:  $79.95 WINTER_FR_0309:  $79.95 WINTER_FR_9402:  $79.95

Improve engine warm-up time in cold weather with a Covercraft winter grille cover for your ‘94-‘12 Ram Cummins truck. In Summer the cover is rolled up and acts as a bug screen to help keep the radiator free-flowing for better cooling. The grille cover is made of black vinyl and goes over the front core support. The material rolls up and down so you can adjust the amount of air you want to pass through the radiator.

Shown uncoated for clarity.

2010-2012

A/C Condenser Guard  I ‘13-‘18, 6.7L WD_COND_GR_13:  $54.95 ‘10-‘12, 6.7L WD_COND_GR_10:  $54.95 ‘03-‘09, 5.9L & 6.7L WD_COND_GR_0307:  $54.95 ‘94-‘02, 5.9L WD_COND_GR_9402:  $54.95

Available in Black only.

The air conditioning condenser on the ‘94-‘18 Dodge Ram has no protection coming from the factory and may be subject to costly damage. The condenser guard addresses this by covering the condenser in full with a black powdercoated 16 gauge guard with 1/2” perforated holes for maximum air flow. The condenser guard has a U-shaped lip that covers the top of the condenser’s fins to keep them from being bent.

p Left side covered up/Winter Front.

Installation for ‘94-‘09 trucks is straightforward and takes only minutes. The lip of the condenser guard is put on top of the air conditioning condenser and secured at the bottom with zip ties.

p Right side unrolled/Bug Screen.

Ram Cummins/ Ram EcoDiesel Winter Front/ Bug Screen (‘10-‘18) ‘10-‘18, Ram GG-WFHD10:  $108.95 ‘14-‘18, EcoDiesel GG-WFED14:  $108.95

This exterior mount winter front/bug screen installs outside the engine compartment and fits over the truck’s grill. Fasten and unfasten the velcro to roll and unroll it.

8 l Ram Turbo Diesel Parts & Accessories  #107

On the ‘10-‘18 trucks the grille has to be removed (instructions show you how) to install the guard. Since the grille has to be removed we strongly suggest purchasing our Quick Grille Release Kit (#QGKT) so that future access to the area becomes a 5-second proposition.

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


FLEETGUARD Engine Block Heater Cables

QGKT:  $26.95

H TDR71, p141-143   I

Since 1994 and the Second Generation truck, with its grille attached to the hood design, Turbo Diesel owners have come to expect easy access to the radiator as well as access to the engine. No more with your ‘10-‘18 truck? Hold on, we’ve corrected this design flaw/service access problem with the Quick Grille Release kit for Fourth Generation trucks. The Quick Grille Release Kit is a simple collection of hardware store parts, but we’ve made refinements by sourcing tether-type release pins. Use the bumper as a step again with this kit. Installation instructions included.

‘89-‘20, 2500/3500 5.9L & 6.7L (6ft. cable.) ‘14-‘20, Ram 1500 EcoDiesel (5ft. cable.) HEATER_CABLE_FL:  $19.95 ECO_HEATER_CABLE_FL:  $19.95

Don’t be left out in the cold! Make sure your Ram Turbo Diesel has a block heater cable so you can warm the engine for easy starting in cold weather. The engine has the block heater installed, but many times the dealers did not order the engine block heater cable with the trucks. *Will not work on ‘14-‘18 Ram 1500 EcoDiesel trucks.

HEATER CABLE PLUG COVER, ‘89-’20 360-0012:  $4.75

Help keep the elements out of the heater cable connection.

ENGINE BLOCK HEATERS CUMMINS ‘89-‘98, 12V

3916127:  $80.95

OEM ‘89-‘98, 12V

GG-30107:  $54.95

2010 Ram shown.

Cab Fresh Filter KitS Replacement Filters (‘03-‘09) CFF-DG-19003R:  $17.00

Replacement Filters (‘10-‘18) CFF-DG-19009R:  $17.00

Cab Fresh Filter Kit (‘94-‘02)  V CFF-DG-0610K:  $56.00

Cab Fresh Filter Kit (‘03-‘09) CFF-DG-19003K:  $59.00

Replacement Filters (‘94-‘02) CFF-DG-0611R:  $16.00

OEM ‘98.5-‘20, 5.9L & 6.7L

GG-30115:  $38.95

NOTE: Before ordering this product double-check to see which engine block heater your truck is equipped with. There is some overlap of years where the ‘94-‘98 Turbo Diesel trucks use either of the engine block heaters.

‘03-‘09 shown.

This easy to install dual-stage filtering system helps remove dirt and dust and keep it from getting into the interior of your truck. It fits over the factory vents underneath the hood. Other cabin filter kits for ‘10-‘18 trucks are available on page 49.

CABIN FILTER KIT GG-CFF1012:  $29.95 REPLACEMENT CABIN FILTERS ‘10-‘18 CHARCOAL NA-4578:  $14.95 ‘16-‘18 OEM PAPER 68406048AA:  $23.95

3975628:  $38.95

These engine block heaters are threaded directly into the engine block on the passenger side. Rated at 750w.

Cab Fresh Filter Kit (‘10-‘18) CFF-DG-19009K:  $59.00

INTERIOR Cabin Filter Kit (‘10-‘18)

CUMMINS ‘98.5-‘20, 5.9L & 6.7L

Attention 4G Owner

ENGINE PARTS & UNDERHOOD PARTS/ACCESSORIES

Quick Grille Release Kit (‘10-‘18)

s:

Best Seller!

Are you getting poor airflow from V   I   H TDR74, p48-49 the HVAC system or are you simply wanting to keep the interior dust-free in your truck? Add this cabin air filter with charcoal filter prior to the HVAC blower motor box to keep the honeycomb grill that covers it free of blockage caused by excess dust. Installing this filter is an easy project. To install the filter into the interior air box requires the use of a either a hot butter knife (box cutter heated with a torch) a Dremel tool with a cut-off wheel; or a small saw blade to cut the opening shown in the included instructions. Our installation instructions describe the steps in detail. You’ll cut out an opening in the dash, slip the filter into the slot, and close it off with a Mopar filter door.

Block Heater Bumper PlugS

‘10-‘18 WD-BHP10:  $49.95 ‘03-‘09 WD-BHP:  $49.95 ‘94-‘02 NON-SPORT WD-BHP-9402:  $49.95 The Block Heater Bumper Plug has the heater cable attached for quick and easy installation. ‘89-‘20 Universal Fit (Plug only.) WD-BHPPL:  $43.95 (This kit does not include mounting brackets. Fits Ram Cummins and Powerstroke trucks.) ‘89-‘20 Universal Fit (Plug with mounting brackets) WD-BHPUNI:  $49.95 (This kit fits Ram Cummins and Powerstroke trucks with aftermarket bumpers.)

Install an Excelsior Block Heater Bumper Plug on your truck, and you have the heater connection located in a fixed position right up front behind a flip-open, weatherproof cover. To install, remove the old block heater cable from the engine block and plug the new cable in. *NOTE: Will not work on ‘14-‘20 Ram 1500 EcoDiesel trucks.

Installs in front bumper.

‘10-‘18 style shown.

NOTE: Some ‘16-‘18 trucks may already have the filter kit installed. You may only need a replacement filter. Check before ordering.

Catalog good through April 2020 l Prices subject to change without notice.

Order 770-886-2500 or genosgarage.com

l9


ENGINE PARTS & UNDERHOOD PARTS/ACCESSORIES

‘Finger Touch’ Oil Drain Valve Now drain your engine oil with the touch of a finger. No more stripped threads, fractured drain plugs, or leaky gaskets.

‘03-‘09

18MM DRAIN VALVE ‘02-‘20, 5.9L & 6.7L FTV-104A: $21.95 ‘89-‘93, 12V FTV-104: $21.95 18MM REMOVABLE 3/8” HOSE NIPPLE - OPTIONAL ‘02-‘20, 5.9L & 6.7L ‘89-‘93, 12V FTV-H001: $5.00 22MM DRAIN VALVE ‘94-‘01 FTV-7B: $24.95 22MM REMOVABLE 5/8” HOSE NIPPLE - OPTIONAL ‘94-‘01 FTV-H002: $6.00 14MM DRAIN VALVE ‘14-‘20, Ram EcoDiesel FTV-106: $21.95 14MM REMOVABLE 3/8” HOSE NIPPLE ‘14-‘20, Ram EcoDiesel FTV-H001: $5.00

‘94-‘02

Sno Depot Stainless Steel Oil Pans (5.9L & 6.7L)

‘03-‘09 SS3949769:  $715.00 ‘94-‘02 SS4089093:  $715.00

FREE

Pans are constructed out of SHIPPING heavy gauge 304 Stainless and laser cut for precision fit. Comes with gasket, hardware and drain plug. Manufacturer limited lifetime warranty.

* T he removable hose nipple is a convenience item. Attach a hose and let it drain to a remote location.

OIL DRAIN VALVE METAL COVER F TV-104, FTV-104A & FTV-106  FTV-DC-001: $2.00 FTV-7B  FTV-DC-002: $2.25

‘13-‘18

Ram Cummins 2500/3500 FEMCO Drain Valve & Tube ‘02-‘20, 5.9L/6.7L  EZ-DP-18MMPLA-DG:  $36.95 ‘94-‘01  EZ-DP-22MMPL-DG:  $36.95 ‘89-‘93  EZ-DP-18MMPL-DG:  $36.95 ‘89-‘20  EZ Drain Valve Tube  EZ-TUBE-DG:  $17.95 NOTE: Drain valve will not work without the tube. Installation requires 30mm socket or wrench. NOTE: Tube sold separately.

‘03-‘12

Ram 1500 EcoDiesel, ‘14-‘20 FEMCO Drain Valve & Tube 14-1.5mm Drain Valve EZ-DP-15-14150-01:  $34.95 EZ Drain Valve Tube (Small) EZ-TUBE-CD-2001:  $11.95

Oil Pan (‘03-’18) ‘13-‘18 DRM264860:  $275.95  ‘03-‘12 DRM264470:  $230.00

This replacement oil pan is a low cost replacement for your Ram truck that fits like OEM. Includes drain plug. • Stamped steel construction ensures long lasting durability • High strength coating prevents rust • Manufactured to strict engineering quality standards

NOTE: Drain valve will not work without the tube. Installation requires 23mm socket or wrench. NOTE: Tube sold separately.

• Permanently replaces the drain plug. • Patented drain tube screws into the oil plug. • Drain the oil, remove the drain tube – thus resealing the drain valve – reinstall the O-ring sealed drain cap, and you’re finished.

Oil Pans and Gaskets (‘89-‘09) ll replacement oil pan drain plugs are 18MM. NOTE: Drain plugs are not included. For drain plug options see below.

‘13-‘18, 6.7L

Pan Gasket 5522189:  $25.95

‘03-‘09, 5.9L & 6.7L

‘03-‘09

Oil Pan 3949769:  N/A Pan Gasket 3958165:  $48.95 Pick Up Tube Gasket 3949562:  $3.25

‘94-‘02, 5.9L

‘94-‘02

Oil Pan 4089093:  $204.00 Pan Gasket 4337616:  $18.95 Pick Up Tube Gasket 3938157:  $2.95

‘89-‘93, 5.9L Oil Pan 3914403:  $215.00 Pan Gasket 4337616:  $18.95 Pick Up Tube Gasket 3938157:  $2.95

Heavy-Duty Oil Plug (with magnetic tip)

18mm (‘02-‘20) 5.9L & 6.7L HDOP-KIT-18MM2:  $19.95 22 mm (‘94-‘01) HDOP-KIT-22MM:  $19.95 18 mm (‘89-‘93) HDOP-KIT-18MM:  $19.95

B&M Drain Plug

BM-80250:  $10.00 TIP: The B&M drain plug is an easy way to add a 1/8 NPT temperature sensor to a trans pan by replacing the plug with a sensor.

DORMAN 18MM Oil Drain Plug Gasket (‘89-‘93 & ‘01-‘20)

DRM0970041 $1.00

DORMAN 22MM Oil Drain Plug Gasket (‘94-‘01)

DRM0971331 $3.15

‘89-‘93

10 l Ram Turbo Diesel Parts & Accessories  #107

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


The Cummins/Mopar vibration dampers are an OEM replacement and are not designed for hi-performance applications. CUMMINS ‘13-‘18, 6.7L CUMMINS ‘07.5-‘12, 6.7L MOPAR ‘03-‘07, 5.9L CUMMINS ‘98.5-‘02, 24V CUMMINS ‘94-‘98, 12V CUMMINS ‘89-‘93, 12V

5333569: $375.00 5285679: $385.00 0508673AA: $399.95 3918999: $209.00 3924435: $229.95 3916436: $209.95

LEARN MORE: HARMONIC DAMPER https://www.genosgarage.com/downloads/ TechPDF/TDR73_HarmonicDamper.pdf

cummins REBUILT wabco 2-Piece DESIGN vacuum pump (‘96-‘02)

Check our website for details.

GD-RBVP  $299.00 CORE REBATE:  $55.00

Have you priced a new or reman Mopar/Cummins vacuum pump? The least expensive price we found was $1400. As an alternative, we now stock rebuilt Wabco pumps. Each pumps comes with a new dual lip design seal, new o-rings and a nitrite gasket. These pumps are priced at $299. However, we want your old core so that we (?) a reman program We’re offering $55 cash back when you return your old vacuum pump.

‘91.5-‘95 Vacuum Pump Retrofit You can use our Cummins Wabco ‘96-’02 vacuum pump on your older ‘91.5-‘95 Turbo Diesel truck with the 3-piece design pump. However, you’ll need to make some modifications to the system, namely a longer oil line (#3934396, pg. 23).

Harmonic Dampers

When was the last time you thought about the crankshaft vibration damper on your Dodge Cummins Turbo Diesel? We will bet you did not know that your Owner’s Manual suggests that you inspect the damper every 30k, 60k, 90k, etc. miles. Get a reduction in noise, better idle quality, less clutch/gearbox chatter (manual trans), and less vibration when accelerating in the 2000rpm to 3000rpm speed zone. ‘07.5-‘18, 6.7L FLUID_920321:  $489.95 ‘03-‘07, 5.9L FLUID_920301:  $489.95 ‘98.5-‘02, 24V FLUID_960301:  $435.95 ‘94-‘98, 12V FLUID_960311:  $489.95 (#960311 Includes Sensor Kit 300003)

Drill Pin Kit, All Years FLUID_300002:  $52.95 (Adds extra pins between the damper and the crank. Used on high horsepower trucks that exceed 3500 rpm in order to additionally secure the damper to the crankshaft.)

BILLET ALUMINUM OIL FILL CAP COVERS, ‘98.5-’20

Killer Dowel Pin Kit (‘89-‘02) ‘94-‘98, 12-valve - STRAIGHT TAB TST-KDP03:  $65.00 ‘89-‘93 or ‘98.5-‘02 - BENT TAB TST-KDP04:  $65.00

The dowel pin used in the Cummins engine can back out of its bore. When it does, it can fall into the camshaft gear and cause all types of expensive engine damage. The folks at TST Products have developed a kit to cover the dowel pin and prevent its movement. The kit is inexpensive protection. Unfortunately the labor involved to access the KDP and cover it with the cover tab is time consuming. However, clear instructions make it a job that the D-I-Yer can handle.

ENGINE PARTS & UNDERHOOD PARTS/ACCESSORIES

oem Vibration DamperS

LEARN MORE: KILLER DOWEL PIN https://www.genosgarage.com/downloads/TechPDF/TDR57_KillerDowelPin.pdf

Polyurethane heavy-duty Engine Mounts (‘89-’93) PB2710: $139.00 pair

RAMS HEAD

BAOC:  $36.95

These are solid polyurethane inserts with an internal locking system where the factory ones have an external safety lock. Features stainless steel hardware. Fits all Dodge pickups equipped with the Cummins engine from ‘89-‘93.

CUMMINS C

BAOC2:  $37.95

We know you like dress-up items. Here’s another one that you can add to your engine with immediate results. Just snap the cover over the existing oil fill cap and you’re good to go.

Mounts: 3” x 3-1/2” and 1-3/4” thick.

NOTE: Will not fit early model ‘89-‘98, 12-valve trucks.

Billet Aluminum Transmission Oil Dipstick Handle, ‘94-‘20, 5.9L & 6.7L

Billet Aluminum Engine Oil Dipstick Handle, ‘07.5-‘20, 6.7l

Dress up the engine compartment with this red anodized transmission oil dipstick handle.

Dress up the engine compartment with this blue anodized oil dipstick handle.

LT-TRANS-DS:  $19.95

NOTE: Does not fit Aisin transmissions.

LT-DIPSTICK:  $19.95

Catalog good through April 2020 l Prices subject to change without notice.

Polyurethane heavy-duty Engine Mount Inserts (‘94-’02) PB2453KIT: $198.00 pair

These are a solid polyurethane mount where the factory ones are rubber with gapped holes in them. These are not inserts that fit inside the stock rubber, but a replacement for the whole rubber mount. To install, remove the old rubber from the engine mount and replace with these.

Order 770-886-2500 or genosgarage.com 

l 11


ENGINE PARTS & UNDERHOOD PARTS/ACCESSORIES

Intercooler Hoses

FRE E SHIPPING!

Replacement intercooler hoses from Gates feature an exclusive Viton inner liner to better withstand high heat and contamination. The hoses are rated for 145 psi and are sold individually.

TURBO ACTUATOR ELECTRONICS, ‘07.5-‘17

Clamps included with each hose.

‘07.5-‘12 CM-ACT12C1:  $700.00

INTRODUCTORY SPECIAL! ‘13-‘17, ACTUATOR & GEAR HOUSING CM-ACTKIT2013:  $895.00 Kit includes actuator, gear housing and wiring adapter.

INTRODUCTORY SPECIAL!

With the VGT everything changed. To work on it you need training, expensive tools and you couldn’t test the actuator so you were left with replacing the turbo which is expensive. City Diesel worked to fix this. Step one was to develop an actuator tester that anyone could use. Shortly after they released it, more affordable rebuilt turbochargers started showing up. However, there was still a problem because the actuator has to be calibrated to the turbocharger and you were not able to simply replace an actuator. This means you either have to pay a fee to get the actuator calibrated at a dealership (average price $200) or buy the entire turbocharger even if the actuator was the only problem. The cost-effective solution: the creation of a new actuator. It is what we call a halfshell: you replace all the electronics, including the circuit board and motor, and reusing the half of your actuator that only contains gears (the “gearbox”). There is no calibration required and no complicated installation. Again, what this means to you is that you have a viable, cost-effective option for replacing your actuator when you have a problem.

TURBOCHARGER OIL DRAIN TUBES & COMPONENTS ‘07.5-‘18 CUMMINS Turbo Oil Drain Tube

4936078: $43.95

‘07.5-‘18 MOPAR Turbo Oil Drain Tube

68005450AA: $65.95

‘00-‘07 Turbo Oil Drain Tube

Will also work on ‘03-’04 trucks, but the pressed-in nipple will have to be removed to install it.

Intercooler Hose Kits ‘10-‘13, 6.7L BD-1045217: $345.00 ‘07.5-‘09, 6.7L BD-1045216: $345.00 ‘03-‘07, 5.9L  BD-1045215:  $310.00 ‘94-‘02, 5.9L  BD-1045210:  $310.00

3970875: $52.95

‘03-‘04 Turbo Oil Drain Nipple  Three piece design drain.

3938127: $26.95

‘94-‘04 Turbo Oil Drain Silicone Hose Coupling

3286499: $26.95

‘94-‘04 Turbo Oil Drain Silicone Hose Coupling

GATES-TL150: $13.95

‘03-‘04 Turbo Oil Drain Coupling Clamp  Sold individually.

3412320: $7.95

‘94-‘02 Turbo Oil Drain Tube  Mounts to the turbo.

3918585: $65.95

‘94-‘02 Turbo Oil Drain Elbow

Hi-Torque Hose Clamps

3903744: $32.95

‘94-‘02 Turbo Oil Drain Coupling Clamp  Sold individually.

3937613: $3.50

2.75” BD-1405209: $17.50 3.00” BD-1405211: $17.50 3.50” BD-1405212: $17.50 4.00” BD-1405213: $17.50

‘94-‘18 Turbo Oil Drain Bolt  2 required.

3900630: $2.25 each

Pressed into the engine block.

12 l Ram Turbo Diesel Parts & Accessories  #107

Black Nomex Silicone intercooler hoses designed for 75 psi of turbo boost with spring-loaded clamps to hold them in place.

These clamps are designed to be used where high boost levels require a hose clamp that can provide extra holding power.

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


(installs under battery)

TPS0304RH:  $94.95

Here is niche product for a niche marketplace: 2003-2004 Turbo Diesel owners with a manual transmission where the Accelerator Pedal Position Sensor (APPS) is located under the battery tray.

RAM 2500/3500 Battery CABLE KITS After having many requests for replacement battery cables (typically Mopar cost are over $400 a set), one of our customers suggested we call Vince at CustomBatteryCables.com. We called Vince. The short version of the story, Vince builds a great product. So much so that his custom cables (read one at a time with talk-time that takes away from build time) could takes days before they could be shipped. Ouch, when the batteries and starting system go bad, you need parts pronto.

If your truck is this vintage of vehicle and you are having the infamous “dead pedal” problem, the answer is often to replace the Mopar #53032456AE part. Yet, because of the location under the battery tray, the problem can also be traced to a bad wiring harness (yep, corrosion). Well known replacement TPS vendor Tim Brenneman (Timbo) has developed a replacement harness that goes from the APPS to the ECM main plug. Now the question: How do you know if you need the 53032456AE APPS or the wiring harness? Check the Geno’s Garage website for the testing procedure and installation instructions.

To eliminate the hassle of one at a time, Vince built us a quantity of cable sets. We stock them, he doesn’t have to answer the phone. His quality is unsurpassed. Vince has been making cables for heavy equipment and trucks for over 20 years. These Ram replacement cable kits are built from 2/0 (“two-aught”) cable for the starter and engine block grounds. After he crimps the heavy-duty copper terminals with a 12-ton hydraulic crimper, he seals the connection with adhesive lined heat shrink which helps prevent battery acid and acid fumes from corroding the cables. Cables are shipped with split loom, nuts and bolts with anti-corrosion plating and connectors and heat shrink to complete the splice. Battery terminal covers are also included. Here are the part numbers that you’ll need. ‘07.5-‘09, 6.7L BAT-DDG35KIT:  $295.00

‘98.5-‘02, 24V BAT-DDG25KIT:  $299.00

‘03-‘07, 5.9L BAT-DDG3KIT:  $315.00

‘94-‘98, 12V BAT-DDG2KIT:  $270.00

The battery cable kits include the following cables: Negative to frame (2) • Positive to Positive crossover • Positive to starter

Throttle Sensitivity Booster ‘07-‘19, 5.9L & 6.7L Manual/Automatic Transmission ‘14-‘18, Ram 1500 EcoDiesel Automatic Transmission BD-1057732:  $255.00 ‘05-‘06, 5.9L Manual & Automatic Transmission BD-1057731:  $255.00 ‘98.5-‘02, 24V Manual Transmission only. BD-1057730:  $255.00 Optional Dash Switch for 1057732 and 1057731 BD-1057705:  $65.00

The BD Throttle Sensitivity Booster provides instant throttle response and reduced pedal lag for your Ram Turbo Diesel truck. You get adjustable sensitivity levels of +50% and +100% Modes. An optional dash switch is available that gives you multiple setting options compared to only two with the standard module.

Battery Terminals

Dodge High Idle Kit

ENGINE PARTS & UNDERHOOD PARTS/ACCESSORIES

Manual transmission apps replacement harness, ‘03-’04

POSITIVE Post (Red) UBT-840P:  $14.99 NEGATIVE Post (Black) UBT-840N:  $14.99

‘07-‘19, 5.9L & 6.7L ‘05-‘06, 5.9L ‘03-‘04, 24V

BD-1036622:  $255.00 BD-1036621:  $265.00 BD-1036620:  $255.00

If the original battery terminals in your Ram truck are broken or corroded, replace them with these heavy-duty battery terminals. They clean up the engine bay nicely.

‘98.5-‘02, 24V ‘14-‘18, EcoDiesel

BD-1036620:  $265.00 BD-1036622:  $255.00

SourcePWR SMART IGNITION POWER MODULE

(for trucks with bellcrank mounted TPS.)

Warm the engine in your Dodge Cummins truck faster on cold mornings with this High Idle Kit. Quick and easy to install. Rotating switch allows for adjustable high idle speeds 900/1200/1500/1800/2100 RPM.

ROSTRA_250_2951:  $29.95

Before the days of your truck having a module-for-this and a module-for-that, an owner would simply tie into an ignition “On” power source and power a relay to add additional circuits. With the Rostra SourcePWR you no longer have to poke and prod for the ignition on signal. The SourcePWR goes directly to the battery and it is triggered on and off (a smart logic circuit) by the voltage drop when you engage the starter. The SourcePWR can then be used to add a 7.5amp circuit to your truck.

Catalog good through April 2020 l Prices subject to change without notice.

Transmission Valve Body Electronics Upgrade Kit (‘00-‘07, 5.9L) BD-1060605:  $229.00

A leading cause of faults with the 47RE/48RE transmission is the failed plastic governor pressure transducer. The BD kit replaces this with a durable metal unit, includes an electronic adapter to prevent over pressure codes and has a built-in temperature sensor for reliability.

Order 770-886-2500 or genosgarage.com 

l 13


ENGINE PARTS • COOLING SYSTEM

COOLING FAN BLADE (‘10-’12)

‘10-‘12, 6.7L 2500/3500/4500/5500 DRM620058:  $109.00 ‘03-‘09, 5.9L & 6.7L 2500/3500 ‘08-‘10, 6.7L 3500/4500/5500 Chassis Cab DRM620065:  $89.95

Restore the clutch-driven fan to original functioning and sustain proper engine operation with this cooling fan blade. Its construction features reinforcement that reduces blade flexing at operating temperatures, improving thermal stability.

AFTERMARKET COOLING FAN & EXTENSION ADAPTER (‘94-’02) FAN-9402:  $317.25

Mopar has discontinued its cooling fans for the ‘89-‘02 Turbo Diesel trucks. Those looking for a replacement end up paying a hefty sum for a used one. This fan is similar to the metal hub with plastic blades fans used in the 2003 and newer Ram trucks. This fan has nine blades instead of seven like the original. The original fan was 22” in diameter and this new model is 20” which flows 39% more compared to the OEM fan. The fan blades are thicker than the original and come back closer to the engine. Therefore, the fan will not work with trucks with aftermarket harmonic dampers and other accessories protruding from the front of the engine without the use of the included spacer. Made in the U.S.A. and comes with a one-year manufacturer warranty.

Steel Fan Blade (‘90-’02, 5.9L)

DRM620066: $125.00

The fan blade on these trucks typically fails due to a crack at a fan blade. The Dorman fan blade features thicker fan blades to reduce flexing. Dorman’s repair solution consolidates two different radiator fan blades into one unique part, for broader vehicle application coverage.

CUMMINS Water Pump (‘89-‘12) Includes replacement water pump O-ring.

5473238 $179.95

GATES Water Pump (‘13-‘18, 6.7L) Includes replacement water pump O-ring.

GATES-42133 $79.95

GATES Water Pump (‘07.5-‘12, 6.7L) Includes replacement water pump O-ring.

GATES-42291 $77.95

GATES Water Pump (‘98.5-‘07, 5.9L 24V) Includes replacement water pump O-ring.

GATES-43526 $45.95

GATES Water Pump (‘89-‘98, 12V) Includes replacement water pump O-ring.

GATES-41181 $48.95

GATES 190° Stock Thermostat Kit (‘98.5-‘09 & ‘13-‘18, 5.9L & 6.7L) Includes seal.

GATES-33915 $19.95

GATES 180° Thermostat Kit (‘98.5-‘09 & *‘13-‘18, 5.9L & 6.7L) Includes seal. *Alternate thermostat for ‘13-‘18.

GATES-33956 $18.95

GATES 200° Stock Thermostat Kit (‘10-‘12, 6.7L) Includes seal.

GATES-34212 $18.95 GATES-33888KIT $21.50

55111033AA $4.95

GATES 180° Stock Thermostat Kit (‘89-‘93) Includes seal.

GATES-33758KIT $9.95

55037660AA $6.95

GATES 16 psi Radiator Cap (‘94-‘10)

GATES-31528 $3.95

GATES 16 psi Stock Radiator Cap (‘89-‘93)

GATES-31523 $3.95

Aftermarket Coolant Reservoir Tank (‘04.5-‘09) Cap and tubing included.

REPD161314 $26.00

6036705AA $16.95

MOPAR Constant Tension Flat Band Clamp - Upper (‘03-‘09) MOPAR Constant Tension Flat Band Clamp - Upper (‘89-‘02)

MOPAR Fan Clutch (‘00-‘02, 24V) Left hand thread.

5521882 $49.95

GATES 180° Stock Thermostat Kit (‘94-‘98, 5.9L 12V) Includes 2 seals.

MOPAR Constant Tension Flat Band Clamp - Upper (‘10-‘12)

MOPAR Fan Clutch (‘03-‘18, 5.9L & 6.7L) Right hand thread.

CUMMINS Water Pump (‘13-‘18, 6.7L) *Post-recall design Includes replacement water pump O-ring.

‘13-‘18 52014729AC $249.95 ‘11-‘12 68155609AA $360.00

‘04.5-‘10 55056990AC $449.00 ‘03-‘04 52028879AF $456.00

52028894AA $190.29 DORMAN Coolant Reservoir (‘93-‘02)

MOPAR Fan Clutch (‘98.5-‘99, 24V) Left hand thread.

MOPAR Fan Clutch (‘91.5-‘98, 12V) Left hand thread.

DRM603775 $42.95

52028615AB $165.00

52028760 $166.36

GATES Fan Hub Assembly (‘03-‘12, 5.9L/6.7L)

FB1001 $149.95

GATES Fan Hub Assembly (‘94-‘02, 5.9L)

FB1002 $156.95

EcoDiesel Water Pump (‘14-‘18) Incudes new temperature sensor and water pump to engine seal kit. Does not include thermostat seal or coolant inlet seal.

68211202AB $525.00

EcoDiesel Thermostat and Housing (‘14-‘18)

68253514AA $134.95

EcoDiesel Water Pump to Engine Seal Kit (‘14-‘18) Does not include thermostat seal or coolant inlet seal.

68147594AA $29.95

NSK OEM Fan Hub Bearing (‘89-‘18)

NSK-BD35 $48.50

EcoDiesel Thermostat O-ring (‘14-‘18)

68157217AA $10.95

CUMMINS Lower Radiator Inlet Hose Adapter Ring Seal (‘94-‘18) For inlet hose to engine block.

3906697 $3.95

EcoDiesel Coolant to Water Pump O-ring (‘14-‘18)

68147586AA $4.95

14 l Ram Turbo Diesel Parts & Accessories  #107

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


We found these aftermarket exhaust manifolds (read: made in China) that we can offer at a great price. The manifold kits even include six engine-to-manifold gaskets, turbo studs, and a turbo gasket (over a $45 value.) The drawback? You might want to use a die grinder to clean up the rough casting around the ports. ‘07.5-‘12, 6.7L DRM674895: $399.00

CUMMINS & MOPAR Exhaust Manifolds

If you look into the engine compartment of your Dodge Cummins Turbo Diesel and find it dirty with soot, it is a good indication that the exhaust manifold is cracked. Replace it with an OEM manifold.

Pulse Exhaust Manifolds

‘07.5-‘18, 6.7L (2-Piece Manifold) BD-1045965:  $510.00 MOPAR ‘13-‘18, 6.7L Cab/Chassis 68205983AA:  $529.00

CUMMINS ‘07.5-‘12, 6.7L Cab/Chassis 5303009:  $425.00

‘07.5-‘18, 6.7L (Gasket Set) BD-1045992:  $77.00

‘03-‘07, 5.9L (2-Piece Manifold) BD-1045987:  $510.00 NOTE: The BD Pulse 24-Valve manifold DOES NOT require any drilling for studs.

‘03-‘07, 5.9L DRM674910: $279.00 MOPAR ‘03-‘07, 5.9L 05135788AC:  $324.95 ‘98.5-‘02, 24V DRM674602: $174.95 CUMMINS ‘99-‘02, 24V 5254373:  $262.95

‘89-‘98, 12V DRM674527: $146.00

CUMMINS ‘98.5, 24V 3937187:  $550.00

Works on trucks with or without EGR.

Exhaust Manifold Stud Kits

‘89-‘98, 12V with aftermarket ATS or BD manifold STUDKIT8905:  $58.00 ‘98.5-‘07, 24V with stock or aftermarket manifold STUDKIT8905_A:  $58.00

CUMMINS ‘89-‘98, 12V 3911349:  $595.00

NOTE: Kits do not have studs for the turbo-to-manifold connections. Does not work on ‘89-‘98, 12-valve engines when the stock manifold is reused because the studs are too short.

CUSTOM EXHAUST TIPS

An exhaust tip puts the final touch on your Ram Turbo Diesel’s exhaust system. Exhaust tips come with all mounting hardware. High Quality T304 Mirror Polished Stainless Steel Will Not Rust • No Welding Necessary 4” TO 5” STAINLESS STEEL Rolled Edge ANGLE CUT Tip

4” ID × 5” OD × 12” L DP-405012RSL:  $41.95

HEAVY-DUTY EXHAUST PIPE CLAMP

ROUND BAND, DOUBLE SADDLE 4” HD19A400Z:  $3.95

5” HD19A500Z:  $4.50

TORCTITE STAINLESS STEEL EXHAUST PIPE CLAMP

PREFORMED LAP JOINT CLAMPS 3.5” HD20S350:  $7.25

Manifold gaskets for ‘89-‘07 included at no extra charge.

‘89-‘98, 12V (3-Piece Manifold) BD-1045948:  $510.00

BD’s Pulse exhaust manifolds are cast from high-silicon ductile iron which can withstand extremely high temperatures, as well as the additional weight created by bigger single or twin turbo systems. Expansion joints allow the manifold to expand and contract.

V-BAND CLAMPS DOWNPIPE-TO-CAST ELBOW ‘07.5-‘18, 6.7L 52121859AD:  $54.95

Save yourself the frustration of trying to line the gaskets up with the manifold and cylinder head using the OEM bolts. Install this stud kit, hang your exhaust manifold gaskets on the studs and then install the manifold. Kit comes with studs and nuts required for a complete installation.

3.5” HD19A350Z:  $3.95

‘98.5-‘02, 24V (3-Piece Manifold) BD-1045947:  $510.00

EXHAUST MANIFOLDS & EXHAUST TIPS

Direct Replacement Exhaust Manifolds

4” HD20S400:  $7.25

5” HD20S500:  $7.25

STAINLESS STEEL DUAL WALL Angle Cut Tip

4” ID × 5” OD × 12” L DP-405013AC:  $54.95

(Gasket not included. Get 68071676AA)

DOWNPIPE-TO-CAST ELBOW ‘04.5-‘07, 5.9L 52121285AA:  $24.95 DOWNPIPE-TO-CAST ELBOW ‘03-‘04, 5.9L 52103596:  $22.95

V-BAND CLAMPS CAST IRON ELBOW-TO-TURBO ‘07.5-‘18, 6.7L 3905216:  $38.95 TURBINE HOUSING-TO-COMPRESSOR HE341/HE351 TURBO ‘03-‘07, 5.9L 3595658:  $36.50 TURBINE HOUSING-TO-CAST ELBOW ‘03-‘07, 5.9L 3535399:  $44.95 DOWNPIPE-TO-CAST ELBOW ‘89-‘98, 12V 4428550:  $31.95

NOTE: Tailpipe may have to be shortened when installing this exhaust tip.

18” STAINLESS STEEL Turn Down Tip

4” ID × 4” OD × 18” L DP-404018TD:  $54.95

14” STAINLESS STEEL Turn Down Tip

5” ID × 5” OD × 14” L DP-505016TD:  $69.95

Catalog good through April 2020 l Prices subject to change without notice.

V-BAND CLAMPS DOWNPIPE-TO-TURBO ELBOW ‘07.5-‘18, 6.7L DRM904353:  $45.95 (Gasket included.)

DOWNPIPE-TO-CAST ELBOW ‘04.5-‘07, 5.9L DRM904354:  $22.95 DOWNPIPE-TO-CAST ELBOW ‘03-‘04, 5.9L DRM904253:  $20.95

Order 770-886-2500 or genosgarage.com 

l 15


DRIVETRAIN PARTS & ACCESSORIES

  I

Deep TranSMISSION Pan (‘89-‘07) ‘98-‘07 MH-727-9803:  $256.50 ‘89-‘97 MH-727-9497:  $256.50

We include a transmission filter with your purchase.

Increased fluid and cooling capacity

NOTE: Also fits ‘03-‘07 HD 48RE transmission.

‘89-‘07 9393

‘07.5-‘12 10304

transmission pans STANDARD TRANSMISSION PANS ‘13-‘19, 6.7L 3500/4500/5500 Aisin AS69RC (+3qt to 4qt. w/4WD & 2WD) PML11142:  $350.00

‘07.5-‘12, 6.7L C/C only. Aisin AS68RC (3qt to 4qt.) PML11139:  $350.00

‘07.5-‘19, 6.7L - 68RFE (+2.5qt. w/4WD; +3qt. w/2WD)

‘89-‘07, 5.9L - 47RE or 48RE) (up to 2qt.) PML9393  $235.00

(Will not work in trucks with Aisin transmission.)

PML10304:  $260.00

  I

‘07.5-‘12, 6.7L 68RFE (+4qt. w/4WD; +4.5qt. w/2WD)

(Will not work in ‘13-‘18 trucks equipped with Aisin transmission.)

PML11039:  $260.00 NOTE: PML pans are designed to work with the OEM reusable gasket. Depending upon the number of times you have already changed the fluid, it may require the purchase of a new trans pan gasket. ‘07.5-‘18 trucks with 68RFE did not come with an OEM pan gasket, but use RTV sealant.

The cast aluminum PML pans feature a magnetic drain plug and 1/4” fins for cooling. The pans have a flat area where you can drill and tap for a 1/8 NPT to 1/2 NPT transmission temperature sender. DIFFERENTIAL COVER AND TRANSMISSION GASKETS Differential Cover Gasket - REAR  (‘19-‘20)  NEW! 11.5 and 12 American Axle  (Aisin Transmission)

MOP-52027827 $28.95

Differential Cover Gasket - REAR  (‘19-‘20)  NEW! 11.5 and 12 American Axle  (68RFE Transmission)

MOP-68454491AA $28.95

Differential Cover Gasket - REAR  (‘03-‘18) 11.5 and 11.8 American Axle  (ALL except ‘03 Automatic)

MOP-5086905AA $27.95

Differential Cover Gasket - REAR  (‘03) 10.5 American Axle  (2500 Automatic)

MOP-5086777AA $24.66

Differential Cover Gasket - FRONT  (‘13-‘20) 9.25 American Axle  (‘14-‘19, 2500/3500 & ‘13, 3500)

MOP-68216204AA $23.16

Differential Cover Gasket - FRONT  (‘03-‘13) 9.25 American Axle  (‘03-‘12, 2500/3500 & ‘13, 2500)

MOP-5086682AA $32.95

68RFE Transmission Filter Lip Seal for Sump Filter  (‘07.5-‘20)

4799964AD $3.49

MOPAR - RTV Sealer, Recommended for 68RFE  (‘07.5-‘20, 6.7L) For 4WD and 2WD trucks.

MOP-05010884AD $6.95

Mag-Hytec 68RFE Transmission Pan Gasket Not for use with OEM transmission pans.

MH-68RFE-GASKET $10.00

Mag-Hytec 727 Transmission Pan Gasket Not for use with OEM transmission pans.

MH-GASKET $6.00

Aisin Transmission Pan Gasket  (‘13-‘20) For AS69RC Automatic transmissions.

68214914AA $18.67

Aisin Transmission Pan Gasket (‘07.5-‘12, 4WD & 2WD) Aisin AS68RC 6-speed Automatic Transmission Pan Gasket  (‘89-‘07)  5.9L engines.

68085955 $5.95 MOP-68020049AA $44.95 MSI7784 $13.95

PTO Gasket (‘89-‘19)

GG-PTOGSKT $5.00

EcoDiesel Transmission Pan, Gasket, Filter and Drain Plug Kit  (‘14-‘20, 3.0L) For the 8HP70 8-speed transmission only.

68225344AA $164.95

EcoDiesel Transmission Pan Gasket  (‘14-‘20, 3.0L) For 8HP70 8-speed transmission only.

68172556AA $11.19

EcoDiesel Transmission Fill Plug  (‘14-‘20, 3.0L) For 8HP70 8-speed transmission only.

68145443AA $10.36

16 l Ram Turbo Diesel Parts & Accessories  #107

Magnetic drain plug

The Mag-Hytec Deep Pan has a magnetic drain plug, pre-drilled 1/8 NPT fitting for a temperature sensor, transmission gasket, and mounting hardware.

‘Double Deep’ Transmission Pan (‘89-‘07, 5.9L)

EXTRA-DEEP TRANSMISSION PAN

Aisin Transmission Drain Plug Gasket  (‘13-‘20) For AS69RC Automatic transmissions.

Use the Mag-Hytec Deep Pan to add capacity to your stock 727, 518, 47RE or 48RE automatic transmission. The pan for years ‘94-‘97 will increase the lube capacity by 1.5 quarts. The pan will not increase the capacity of the ‘98 and up model 47RE transmissions as Dodge enlarged the factory pan.

‘98-‘07 MH-727DD-9803:  $289.75 ‘89-‘97 MH-727DD-9497:  $289.75

We include a transmission filter with your purchase of a pan.

Fits the stock 727, 518, 47RE or 48RE automatic transmission. Cast of 356T6 Aluminum The “Double Deep” and black powercoated pan has all the same features as the Deep Pan; magnetic drain plug, pre-drilled 1/8 NPT fitting for a temperature sensor, transmission gasket, and mounting hardware. In addition, with the “Double Deep” pan, the inside depth of the pan is increased from 3” to 5-1/4”, which adds another four quarts of fluid capacity to the system. The pan is still tucked 1/2” above the truck’s center frame cross-member. The kit includes spacer hardware to relocate the transmission filter deep into the sump.

68RFE TranSMISSION Pan (‘07.5-‘19, 6.7L) MH-68RFE-A:  $304.00

Mag-Hytec’s high-capacity deep sump for the 68RFE transmission provides for an additional 3 qts. of fluid for maximum cooling from its finned aircraft aluminum construction.

Cast of 356T6 Aluminum and black powercoated

A 1/8 NPT temperature sender port lets you add a temperature gauge to keep tabs on fluid temperatures during heavy-duty use or long tows. When it is time for a fluid change, a magnetic drain plug makes draining the fluid easy and lets you see if there are any contamininants in the fluid. Freddie Frugal includes a replacement sump filter and gasket with the purchase of the 68RFE pan. The customer is responsible for the Mopar 5179267 spin-on filter (page 4).

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


9.25 DIFF COVER (‘14-‘19, 2500 & 13-‘18, 3500) MH-AA12-925:  $289.75

Increases capacity from 2.5 quarts to 4.5 quarts.

9.25 DIFF COVER (‘03-‘12, 3500 & ‘03-‘13, 2500) MH-AA14-925: $289.75

‘14-‘18, 14 bolt 11147

Increases capacity from 2.5 quarts to 4.5 quarts. NOTE: Effective July 2012, Mag-Hytec redesigned the cover to alleviate interference with the trackbar and steering damper. However, it is possible that modifications will have to be made to the U-bolt bracket or to the cover itself for clearance issues. It is important to pay very close attention to detail during installation. Once the cover has been installed or modified to work it cannot be returned.

Dana 60 (‘89-‘02) MH-DA60: $280.25 Increases capacity from 3.5 to 4.5 quarts.

Dana 60 w/Vented Cover (‘02)  MH-DA60-VENT:  $280.25

(Only Fits ‘02 Trucks with Vented Cover) CAUTION: Installation of front cover is just a bit more involved than for Mag-Hytec rear differential covers. You need to pop the driver’s side tie-rod end loose from the steering knuckle to give clearance between the ring gear and the steering rod.

Mag-Hytec front differential covers increase the fluid capacity over the stock cover. They are a perfect match in appearance and function to the rear differential covers.

‘13-‘18, Ram 1500 9518

1/8 NPT temperature sending unit fitting Increased lubricant and cooling capacity

‘03-‘13, 9.25 11118

FRONT DIFFERENTIAL COVERS

REAR DIFFERENTIAL COVERS

‘13-‘19, 3500 & ‘14+, 2500 AAM 12-9.25   12 Bolt (+.50qt.) PML11136:  $200.00

‘03-‘13, 2500 & ‘03-‘18, 3500 AAM 11.5  14 Bolt (+.75qt.) PML10361:  $200.00

‘03-‘12, 3500 & ‘03-‘13, 2500 AAM 14-9.25 Low Profile   14 Bolt (+.50qt.) PML11118:  $200.00

‘03-‘13, 2500 & ‘03-‘18, 3500 AAM 11.5  14 Bolt (+.75qt.) PML10361:  $200.00

‘14-‘18, 2500 AAM 11.5  14 Bolt (+.50qt.) PML11147:  $200.00

‘03, 2500 AAM 10.5 14 Bolt (+.80qt.) PML10302:  $200.00 ‘94-‘02 Dana 80 10 Bolt (+.80qt.) PML9520:  $200.00

NOTE: PML pans are designed to work with the OEM reusable gasket. Depending upon the number of times you have already changed the fluid, it may require the purchase of a new differential cover gasket.

Perhaps the most important feature for off-road use of your four wheel drive Dodge Ram is the angled ramp on the bottom half of the cover instead of a flat mounting flange. The purpose for this ramp is that if you hit a rock or other obstruction on the trail, the differential will tend to ride up and over it instead of smashing the cover into the gears.

DRIVETRAIN PARTS & ACCESSORIES

Front DiffERENTIAL Covers

‘94-‘02 & ‘89-‘93 2500/3500 Dana 70 10 Bolt (+.80qt.) PML9426:  $200.00 ‘09-‘18 Ram 1500 12 Bolt (+.80qt.) PML9518:  $200.00

The PML differential covers feature a low profile for clearance and oil fill/level check and drain holes to make it easy to follow the 15K oil change interval. Extra capacity, fins, and aluminum construction aid in heat dissipation to keep fluid cool.

Catalog good through April 2020 l Prices subject to change without notice.

Rear Differential Covers

Lubricant reference plug

‘94-‘02 Dana 70 (6 qt.) ‘89-‘93, 2500/3500 MH-DA70: $256.50 ‘94-‘02 Dana 80 (8 qt.) MH-DA80: $261.25 ‘03, 10.5 American Axle (6 qt.) MH-AA10-5: $289.75 ‘14-‘18, 2500 11.5 American Axle (8 qt.)  MH-AA11-5CS:  $289.75 For trucks with coil springs.

‘03-‘12, 2500/3500 ‘13-‘18, 3500 without rear sway bar ‘13 2500, 11.5 American Axle (8 qt.)  MH-AA11-5:  $289.75 NOTE: DANA 80/2WD APPLICATIONS When ordering, please let us know if you have a two-wheel drive truck with a Dana 80 and a factory-installed sway bar or Hellwig sway bar so that a sway bar relocation kit can be included with your rear differential cover.

Universal Replacement Drain Plug MH-DRPLUG:  $15.00

If the original drain plug that came with the Mag-Hytec pan or cover gets damaged, we carry this universal replacement. Includes Allen tool.

Order 770-886-2500 or genosgarage.com

l 17


DRIVETRAIN PARTS & ACCESSORIES

4WD TRANSFER CASE SUPPORT BRACKET KIT (‘03-’07) TC48REAC: $98.95

4WD transfer case housings on trucks with 48RE transmissions often crack and this is typically due to the lack of support of the heavy transfer case. This kit has been designed to solve this problem and is easy to install.

TRANS-COOL

A specially designed steel bracket installs in place of the lower two bolts (longer bolts supplied), and includes the common universal mount.

Manual TransMISSION Coolers

NOTE: Must have factory skid plate installed to work.

DUAL COOLERS KIT

‘05-‘18, G56  TRANSCOOL_2:  $239.95 ‘94-‘05, NV4500/NV5600  TRANSCOOL_3:  $239.95 ‘89-‘93, Getrag 360  TRANSCOOL_1:  $239.95

HEAVY-DUTY REAR ENGINE/TRANSMISSION POLYURETHANE MOUNT (‘94-‘02, 2500/3500)

SINGLE COOLER KIT

‘05-‘18, G56  TRANSCOOL_SGL_2:  $126.95 ‘94-‘05, NV4500/NV5600  TRANSCOOL_SGL_3:  $126.95 ‘89-‘93, Getrag 360  TRANSCOOL_SGL_1:  $126.95

PB2852 $99.00

Specify truck year and transmission when ordering.

The TRANS-COOL is designed to transmit heat from the inner surfaces to the air-cooled outer fins which helps dissipate heat from the transmission. The coolers add an additional quart of trans fluid to the gearbox. Depending on the TRANS-COOL kit, it includes: aluminum cooler(s); PTO gasket(s); twelve or six PTO bolts and washers; and 1/8 NPT temperature gauge ports with plugs. Check for possible clearance problems with a larger aftermarket exhaust system before ordering. You will need a minimum of 4 inches of clearance from the base of the PTO mounting surface

This heavy duty, polyurethane bushing is a direct replacement for the stock mount. Fits in the same location, easy to install.

HEAVY-DUTY REAR ENGINE/TRANSMISSION POLYURETHANE LOWER MOUNTS (‘89-‘93, 4X4 d250/d350)

PB1604 $26.00

These heavy duty, polyurethane bushings are a direct replacement for the stock mount. Easy to install and fit in the same location.

Check for possible clearance problems with a larger aftermarket exhaust system before ordering. You will need a minimum of 3 inches of clearance from the base of the PTO mounting surface.

Fast Coolers-Pair NV4500 & NV5600, ‘94-‘05 FC-2FC300:  $169.00 Fast Cooler-Single, ‘94-‘05 NV4500 & NV5600 FC-1FC300:  $89.00 G56 Adapter Kit, ‘05-‘18 FC-G56-ADAPTER:  $28.00 G56 Single Side Adapter Kit, ‘05-‘18 FC-1G56:  $15.00 Filter Kit, ‘89-‘18 FC-FILTERKIT:  $39.00 Filter Kit Replacement Filter, ‘89-‘18 FC-REPFILT:  $12.00

RAM 1500 ECODIESEL TRANS PAN, FILTER, PLUG & GASKET KIT, ‘14-’20 DRM265850:  $133.95

This kit allows you to replace the filter only unlike the OEM pan.

Looking for a way to dissipate heat from your 5-speed or 6-speed manual transmission? The a nswer is the Fast Cooler! Made from extruded aluminum, the finned coolers add gearbox fluid capacity by two quarts (one quart per side). The coolers also have a 1/4 NPT fitting to allow the owner to easily add a transmission temperature sending sensor. • Fast Coolers ship with sealant, hardware, and instructions. • Uses stock PTO covers on end of tubes. • For use with stock exhaust systems.

Cover with Sight Glass

SIGHT GLASS & BLANK COVER FC-SG-COVER-KIT:  $59.00

SIGHT GLASS ONLY FC-SG-COVER-SINGLE:  $39.00

Check the fluid level with a quick glance.

18 l Ram Turbo Diesel Parts & Accessories  #107

RAM 1500 ECODIESEL TRANS FILTER & GASKET, ‘14-’20 DRM265850F:  $49.95

Replacement filter and gasket only. Only works with Dorman trans pan, DRM265850.

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


*NOTE: ‘03-‘18 #HYD-X-750 not for use with G56 transmission with OEM dual mass flywheel.

*(‘03-‘18) Adj. HYD-X-750: $315.25 (‘98-‘02) Adj. HYD-X-150: $315.25 (‘94-‘97 ) Non-Adj. HYD-X-HD: $315.25 (‘89-‘93) Non-Adj. HYD-GEN1: $242.50 OEM style.

MOPAR Transfer Case Shift Indicator Switch (‘04-‘11) ** Please compare to stock sensor before ordering. This sensor requires a 7/8” socket or wrench for removal. **

DORMAN Transfer Case Indicator Mode Switch (‘03-‘11 & ‘18) For trucks with 271 Series transfer case. Requires 1-1/2” socket for removal.

05134375AA $39.95

DRM600555 $49.95

**Please compare to stock sensor before ordering.**

DORMAN Automatic Transmission Pressure Transducer (‘11-‘18) Trucks with 68RFE transmission.

DRM601215 $52.95

DORMAN Transfer Case Switch (‘97-‘02)

DRM600550 $10.95

DORMAN Automatic Transmission Pressure Transducer (‘00-‘07) Trucks with the 47RE and 48RE transmissions.

DRM601016 $64.95

DORMAN Transfer Case Switch (‘94-‘00)

DRM600553 $13.95

DORMAN Automatic Transmission Output Speed Sensor (‘94-‘07)

DRM917602 $16.95

MOPAR Backup Lamp Switch (‘05-‘18) For G56 transmission.

68089074AA $36.95

MOPAR Backup Lamp Switch (‘94-‘05) For NV4500 and NV5600 transmission.

56007270AA $62.95

MOPAR Transmission Kickdown Cable (‘98-‘04, 5.9L 2500/3500)

52107742AC $51.95

DORMAN Axle Actuator Housing, 4WD (‘94-‘02)

DRM917500 $24.95

DORMAN Axle Actuator, 4WD (‘94-‘02)

DRM600202 $115.95

MOPAR Automatic Transmission Shift Position Indicator (‘98-‘02, 2500/3500 & ‘98-‘01, 1500)

MOPAR Front Axle Locker (‘13-‘18, 4x4) ‘13-‘18 Ram 3500 ‘14-‘18 Ram 3500 Chassis/Cab ‘14-‘18 Ram 2500

56020622 $41.95

68216944AA $299.95

DORMAN Transfer Case Shift Motor  (‘13-‘18, 6.7L) Trucks with transfer case Model BW44-46

DRM600908 $148.95

DORMAN NV273 Transfer Case Shift Motor (‘06-‘12)

DRM600935 $256.95

For Ram 2500/3500/4500/5500 trucks.

MOPAR 4WD Transfer Case Vacuum Harness (‘98-‘01)

For Ram 1500/2500/3500 trucks.

MOPAR 4WD Transfer Case Vacuum Harness (‘94-‘97)

For Ram 1500/2500/3500 trucks.

MOPAR Transfer Case Shift Linkage (‘06-‘12)

For Ram 1500/2500/3500 trucks with NVG271 transfer case.

DORMAN Transfer Case Shift Linkage with Grommets (‘03-‘05) For Ram 1500/2500/3500 trucks with NVG271 transfer case and 11” rod.

MOPAR Transfer Case Shift Linkage (‘03-‘05)

For Ram 1500/2500/3500 trucks with NVG271 transfer case and 16.5” long shift rod.

MOPAR Transfer Case Shift Linkage (‘98-‘02)

For Ram 1500/2500/3500 trucks with 231 and 241 transfer case. Bolt included.

DORMAN Transfer Case Shift Linkage Grommet (‘03-‘12) For use with 241 and 271 transfer cases.

DRIVETRAIN PARTS & ACCESSORIES

SOUTH BEND CLUTCH Heavy-Duty Hydraulic Clutch Slave and Master Cylinder Assembly No bleeding of master cylinder required.

52105317AB $28.95

52078361 $23.95

55366066AB $36.95

MOPAR Transmission Kickdown Cable Return Spring (‘90-‘04)

53009055 $4.95

DORMAN G56 Manual Transmission Inner Shift Boot (‘05-‘18) Low-cost CV axle boot alternative.

DRM614002 $27.00

CUMMINS Automatic Transmission 90° Oil Cooler Hose (‘98-‘06)

4930889 $19.95

DRM926884 $25.95

NEW! 52105580AA $23.95

NEW! 52105006 $29.95

DRM14078 $7.25 each

Catalog good through April 2020 l Prices subject to change without notice.

CUMMINS Automatic Transmission Oil Cooler Hose Spring Clamp (‘98-‘06)

For hose #4930889. 2 clamps required per hose.

3931545 $3.95 each

68RFE Transmission Spin-on Filter Steel Nipple Upgrade  (‘14-‘20)

GG-68RFEN $17.00

MOPAR 8HP70 8-Speed Automatic Transmission Fill Plug  (‘14-‘20)

68145443AA $15.95

MOPAR Aisin AS69RC Transmission Drain Plug Gasket (‘13-‘20)

68085955 $5.95

Order 770-886-2500 or genosgarage.com 

l 19


REBUILD KITS & REPLACEMENT PARTS

NO START TIP (‘94-‘98 12-valve engines) Should the fuel START/RUN solenoid fail to energize (come up) and/or hold in the “UP” position, do not let its malfunction leave you stranded. Have an assistant attempt to start your truck while you move the solenoid’s plunger up to the “RUN” position. If it starts and the solenoid holds in the “RUN” position, drive it to your destination for further troubleshooting as time permits. If the solenoid fails to hold in the “RUN” position, tie-wrap it in the “RUN” position, and drive it to your destination. Cut the wrap, and the engine will stop. So, we presented a tip to get you to a desired location. Does the problem lie with the solenoid, the relay to the solenoid, the fuseable link that feeds the solenoid or a fuse? Do a voltage check at the solenoid’s three-wire connector. Negative goes to the Black/Red trace wire. On “START”, positive 12-volts will be at the Red/Black trace wire. If voltage is present for “START” the solenoid is likely the problem.

No voltage for “START”? Chances are that the solenoid is okay. Check the relay, fuseable link or fuse #9 as the source of the electrical malfunction.

No voltage for “START” tells you to check the relay to the solenoid (Item 1).

Also check the fuseable link that feeds the solenoid (Item 2) or fuse #9 in the fuse panel.

ENGINE ACCESSORY REBUILD KITS Starter Solenoid Rebuild Kit (‘89-‘06)  Designed to carry twice the amperage

load for easier starting and longer life. The SuperSize Contacts fit perfectly and are a replacement for the common problem of sticking and clicking stock starter contacts in ‘89-‘06 starters. H TDR78, p92-93

Battery Side

Starter Stud Repair Kit (‘89-‘02)  Occasionally a loose battery cable at the

Motor Side

starter can cause arcing/corrosion and the starter stud may be damaged causing difficult removal. Replace the starter stud with this kit if it is damaged. Kits include copper stud with knurl for battery cable connection, washer, nut, O-ring and all insulators. Fuel Shutoff Solenoid, Bracket and Relay (‘94-‘98)  The P7100 pump on the

‘94-‘98 Dodge/Cummins 12-valve engine utilizes a 12-volt electric solenoid that, over time, may stop functioning. Get a replacement solenoid to keep on hand in case your truck runs into trouble. SPECIAL: Mounting Bracket and Fuel Shutoff Relay included with this solenoid kit. Fuel Solenoid Saver Diode (‘94-‘98)  Save the fuel solenoid from burning up

if the starter sticks on.

65 amp Fusible Link (‘94-‘98)  Protection for the power supply to the fuel

shutoff solenoid.

Fuel Shutoff Relay (‘94-‘98)  This 70 amp relay activates the fuel solenoid.

Fuel Solenoid Replacement Boot (‘94-‘98)  Replace a torn boot on the fuel

shutoff solenoid and help prevent damage to it. H TDR74, p94-96

PLUNGER • CONTACTS • INSTALL DVD GD-G11SKIT:  $29.99

BATTERY SIDE STUD KIT GD-2791: $19. 95

MOTOR SIDE STUD KIT GD-3160: $19. 95

SOLENOID, BRACKET & RELAY SA-4981-12:  $89.95

SS99:  $24.50

FL90:  $13.85

SS70A:  $13.95

SA-4153:  $9.95

BOSCH REBUILD KIT (‘08-‘10, 6.7L)

BOSCH Kit

Alternator Rebuild Kits  The most common problem with an alternator is that the

brushes wear out. Without brush-to-armature contact there is no electrical charge. Some truck owners replace alternators. Budget conscious owners rebuild the alternator with new brushes and bearings prior to complete failure. H TDR74, p94-96

PLUNGER & CONTACTS GD-G11S:  $19.95

Rebuild kit for ‘08-‘10 trucks fits Bosch alternators only.

GD-ARK-BOSCH01308: $39.99

BOSCH REBUILD KIT (‘03-‘07, 5.9L)

GD-ARK-0307BOSCH: $34.99

BOSCH REBUILD KIT (‘98-‘02) GD-ARK-BOSCH: $34.99

DENSO REBUILD KIT (‘89-‘02)

DENSO Kit

GD-ARK-DENSO: $34.99

Vacuum Pump Reseal Kit (‘91.5-‘02)  This kit repairs the engine oil leak where

the power steering pump joins the vacuum pump. This is a common leak since the seal inside the vacuum pump ages with time. Why buy a new vacuum pump when you can rebuild it?

Rebuild kits come with DVD instructions, written instructions, a modified seal, extra O-rings, and a Cummins gasket to reinstall the pump to the engine. Vacuum Pump Seal Kit (‘91.5-‘02)  This kit includes only the vacuum pump seals and is designed for those experienced in vacuum pump repair.

REBUILD KIT (‘96-‘02) GD-VPRK-9602:  $59.99

REBUILD KIT (‘91.5-‘95) GD-VPRK-9195:  $59.99

GD-GG03XP-VPSK:  $31.99

Extra O-rings and a dual lip seal are included in the kit.

Replacement Vacuum Pump Fiber Vane Set (‘91.5-‘02)

20 l Ram Turbo Diesel Parts & Accessories  #107

GD-10FV: $24.00

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


MOPAR Bellcrank Throttle Bushings  (‘89-‘98, 12V) 2 required per vehicle.

1994-2002 SECOND GENERATION 4425053 $7.75 each

AFTERMARKET Throttle Position Sensor (‘98.5-‘04, 24V) This TPS fits trucks equipped with either a manual or automatic transmission. Once installed, calibration is required.

DORMAN Throttle Position Sensor  (‘90-‘93)

DRM904342 $172.95

(Instructions included.)

TPS/APPS Delete  (‘91.5-‘98, 12V)

LD-TPSDEL $30.00

CUMMINS Throttle Position Sensor  (‘94-‘98, 12V)

AFTERMARKET Grid Heater Relay (‘89-‘02)

CUMMINS Intake Air Temperature Sensor  (‘89-‘97)

CUMMINS Thermo Switch (‘89-‘93)

4327029 $67.95

CUMMINS 3-wire Connector Repair Kit (‘89-‘93 & ‘94-‘97) Fits 4327029 and TPS3930318

3823255 $15.95

CUMMINS Coolant Temperature Sensor  (‘92-‘97)

3920363 $49.95

CUMMINS Coolant Temperature Sensor  (‘89-‘91) For non-intercooled engines.

3912074 $38.95

CUMMINS Oil Pressure Sensor (‘90-‘98) 12-valve, 2 prong connector

3923200 $78.95

CUMMINS Speed/Crank Position Sensor  (‘89-‘97)

3924432 $132.95

GATES Tensioner Pulley Assembly (‘89-‘02)

CUMMINS Tensioner Pulley Assembly (‘89-‘02)

CUMMINS Pushrod/Tappet Cover (‘89-‘98, 12V)

H TDBG Vintage, ‘94-‘04 Lock/Unlock

H TDR 83, p92-93: How to Calibrate

TPS3930318 $214.95

RELAY-75565 $21.95 3918461 $64.95

GATES Tensioner Pulley (‘89-‘02)

TPS98502 $169.00

GATES-36094

$25.95

CUMMINS Throttle Position Sensor Bracket  (‘94-‘98, 12V)

3925380 $21.95

TPS/APPS Delete  (‘91.5-‘98, 12V)

LD-TPS-DEL $30.00

MOPAR Bellcrank Throttle Bushings  (‘89-‘98, 12V) 2 required per vehicle.

4425053 $7.75 each

BD APPS Noise Isolator  (‘94-‘04, 5.9L) Interference in the throttle position sensor circuits (APPS) on Dodge Cummins engines from ‘94 to ‘04 will create false voltage readings in the APPS/TPS circuit and cause the lock-up torque converter to rapidly cycle on and off as you drive. This part removes the RF interference.

BD-1300030 $29.00

MOPAR Throttle Cable  (‘98.5-‘02)

53031626AC $30.95

REBUILD KITS & REPLACEMENT PARTS

1989-1993 FIRST GENERATION

GATES-38157

$52.95

MOPAR Throttle Cable Package  (‘96-‘98, 12V) Built after 01/01/96. Includes upgraded throttle cable and bell crank lever. With 11mm hole.

04897407AA $57.95

MOPAR Throttle Cable Package  (‘94-‘96, 12V) Built prior to 01/01/96. Includes upgraded throttle cable and bell crank lever. With 8mm hole.

04897406AA $42.95

MOPAR Transmission Kickdown Cable (‘98-‘04, 5.9L 2500/3500)

52107742AC $51.95

5333499

$113.95

3990732 $149.95

CUMMINS Tappet Cover Bolt Grommet/Seal (‘89-‘98, 12V) (6 grommets/seals required per cover.)

3900267 $4.50 each

CUMMINS Replacement 12-valve Engine Nameplate Grommet (‘91.5-‘98)  (2 required.)

3923206 $9.95 each

CUMMINS Vacuum Pump Oil Supply Line (‘89-‘94) Short 4” long line.

3925100 $57.95

CUMMINS AFC Boost Reference Line (‘89-‘93) Attaches to VE pump diaphragm. Requires 2 sealing washers (3918188). See page 33.

3282437 $49.95

CUMMINS AFC Boost Line Banjo Bolt (‘89-‘93)

3924724 $18.95

Catalog good through April 2020 l Prices subject to change without notice.

CUMMINS Crankcase Vent Filter  (‘98.5-‘02) O-ring is included.

3944961 $59.95

CUMMINS Replacement Oil Fill Tube/ Crankcase Vent Filter O-ring  (‘98.5-‘02)

3903475 $4.95

Order 770-886-2500 or genosgarage.com 

l 21


REBUILD KITS & REPLACEMENT PARTS

1994-2002 SECOND GENERATION

1994-2002 SECOND GENERATION

CUMMINS Grid Heater Kit (‘98.5-‘07) Includes (2) 3969988 gaskets for installation.

3969987-KIT $129.95

DORMAN Grid Heater Relays (‘97-‘02)

DRM904308 $53.95

AFTERMARKET Grid Heater Relay (‘89-‘02)

RELAY-75565 $21.95

BD HX35 Turbocharger Adjustable Wastegate Actuator (‘99-‘02) Will not work on HY35 Turbo.

BD-1047151 $239.00

BD Adjustable Wastegate Actuator (‘94-‘98.5) On 1998.5 trucks with HX35 Turbo only.

BD-1047150 $239.00

CUMMINS AFC Boost Reference Hose (‘94-‘98, 12V) Hose length; 7.5”

NEW! 3991518 $21.50

CUMMINS AFC 90° Elbow Male Adpater (‘94-‘98, 12V)

NEW! 3910265 $24.50

CUMMINS AFC Straight Male Connector (‘94-‘98, 12V)

NEW! 3920803 $14.50

CUMMINS MAP Sensor  (‘01-‘02) *‘02 trucks require 3104228 adapter.

4921505 $98.95

CUMMINS Coolant Temperature Sensor Wiring Harness  (‘98.5-‘02) & (‘04.5-‘20)

5394261 $35.95

CUMMINS Coolant Temperature Sensor  (‘98, 12V)

3920364 $58.95

CUMMINS Coolant Temperature Sensor  (‘92-‘97)

3920363 $69.95

CUMMINS Oil Pressure Sensor  (‘98.5-‘02) (24-valve, 3 prong connector) Some 2002 models have 1 wire. Please inspect before ordering.

4326849 $82.95

CUMMINS Oil Pressure Sensor  (‘02-‘06) 2002 single wire only.

4076930 $13.95

MOPAR Oil Pressure Sensor (‘94-‘98) (12-valve, 2 prong connector)

56031005 $59.95

CUMMINS Oil Pressure Sensor (‘90-‘98) (12-valve, 2 prong connector)

3923200 $78.95

MOPAR Oil Pressure Switch Connector Repair Kit (‘94-‘98, 12V) 2 wire connector for switch #56031005. CUMMINS MAP Sensor Wiring Harness  (‘02) *Required for 4921505 on ‘02 trucks.

3104228 $51.95

CUMMINS MAP Sensor  (‘98.5-‘00)

4921497 $88.95

CUMMINS MAP Sensor Wiring Harness  (‘98.5-‘00) For 4921497 on ‘98.5-‘02 trucks.

3824256 $12.95

CUMMINS Intake Air Temperature Sensor  (‘98.5-‘02)

3408345 $48.95

CUMMINS Intake Air Temperature Sensor  (‘98, 12V)

3932272 $63.95

CUMMINS Intake Air Temperature Sensor  (‘89-‘97)

3918461 $64.95

CUMMINS Coolant Temperature Sensor  (‘98.5-‘02) & (‘04.5-‘20)

4954905 $19.95

22 l Ram Turbo Diesel Parts & Accessories  #107

05017117AA $34.95

CUMMINS Cam Position Sensor  (‘98.5-‘02)

4921597 $26.95

CUMMINS Oil, Crank, Cam Position Sensor Wiring Harness  (‘98.5-‘02) For cam position sensors #4326849, #4921601 & #4921597. 3 wire connector.

3823254 $15.95

CUMMINS Crank Position Sensor  (‘98.5-‘02) ‘01-‘02 trucks should not have a CPS so check by the starter before ordering.

4921601 $63.95

CUMMINS Speed/Crank Position Sensor  (‘97-‘98, 12V)

3923129 $129.95

CUMMINS Speed/Crank Position Sensor  (‘89-‘97)

3924432 $132.95

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


GATES Tensioner Pulley Assembly (‘89-‘02)

CUMMINS Tensioner Pulley Assembly (‘89-‘02)

1994-2002 SECOND GENERATION

GATES-38157

$52.95

5333499

$113.95

CUMMINS Oil Cooler  (‘89-‘02, 5.9L)

CUMMINS Engine Oil Dipstick and Handle  (‘01-‘02, 24V) Blade style. Length: 47”

3957544 $229.95

3937748 $10.95

You must purchase dipstick tube #3937749 together with this part.

GATES Accessory Drive Belt Kit (‘94-‘02, 5.9L) Kit includes heavy-duty replacement serpentine belt and tensioner assembly.

GATES-90K38157A $76.95

CUMMINS Crankcase Breather Molded Hose  (‘98.5-‘02, 24V)

3945268 $23.95

CUMMINS Valve Cover Isolator/Seal (‘98.5-‘02, 24V) (5 seals required per valve cover.)

3946168 $12.95 each

CUMMINS Pushrod/Tappet Cover (‘89-‘98, 12V)

CUMMINS Dipstick Tube  (‘01-‘02, 24V) This dipstick tube is for use with #3937748.

3937749 $86.50

CUMMINS Engine Oil Dipstick and Handle  (‘98.5-‘00, 24V) Blade style. Length: 44”

3935648 $34.95

CUMMINS Engine Oil Dipstick and Handle  (‘96-‘98, 12V) Blade style. Length: 45”

3923128 $39.95

3990732 $149.95 MOPAR Transmission Oil Dipstick  (‘94-‘02) 46RH, 46RE and 47RE

CUMMINS Pushrod/Tappet Cover Noise Panel (‘94-‘98, 12V)

3924606 $156.95 CUMMINS Engine Oil Dipstick and Handle  (‘94-‘95, 12V) Blade style. Length: 45”

CUMMINS Pushrod/Tappet Cover (‘98.5-‘02, 24V)

52107769AE $41.10

3928740 $65.95

3936249 $78.95 MOPAR Replacement Oil Cap (‘98.5-‘20)

68003321AA $24.95

CUMMINS Tappet Cover Bolt Grommet/Seal (‘98.5-‘02, 24V) (6 grommets/seals required per cover.)

3928759 $4.00 each

CUMMINS Replacement Oil Cap (‘89-‘98, 12V)

4962608_KIT $27.95

CUMMINS Tappet Cover Bolt Grommet/Seal (‘89-‘98, 12V) (6 grommets/seals required per cover.)

3900267 $4.00 each

Windshield Washer Reservoir (‘94-‘02)

REPD370514 $69.95

CUMMINS Replacement 12-valve Engine Nameplate Grommet (‘91.5-‘98)  (2 required.)

3923206 $9.95 each

DORMAN Hood Release Cable (‘94-‘05) 1500/2500/3500

DRM912086 $43.95

MOPAR Vacuum Line Feed Line (‘97-‘02) Pump to firewall with check valve.

MOPAR Vacuum Pump Oil Line Fitting (‘97-‘02) Fitting is attached to the engine block.

Mopar Vacuum Pump to Engine Block Oil Line (‘98.5-’02) Over time this line can leak. Replace it with this OEM part.

REBUILD KITS & REPLACEMENT PARTS

1994-2002 SECOND GENERATION

MOPAR Battery Hold Down Strap (‘94-‘02)

55275220 $22.95

DORMAN Battery Hold Down Kit (‘94-‘02)

DRM00582 $10.95

DORMAN Power Steering Reservoir Cap (‘89-‘02)

DRM82577 $6.95

Hood Pad Retaining Clip Kit (‘94-‘02) This kit has all 15 clips required to replace the broken clips and put the hood pad back where it belongs.

GG-HOODCL $9.95

55056421AA $19.95

3941472 $12.95

3934396 $58.95

Catalog good through April 2020 l Prices subject to change without notice.

Order 770-886-2500 or genosgarage.com 

l 23


REBUILD KITS & REPLACEMENT PARTS

2003-2009 THIRD GENERATION MOPAR Accelerator Pedal Throttle Position Sensor (TPS) with Pedal (‘09-‘19) For trucks with a G56 or 68RFE transmission. Two TPS versions for these years. Check which TPS you have in your truck before purchase of new part.

MOPAR Accelerator Pedal Throttle Position Sensor (TPS) with Pedal (‘09-‘19) For trucks with G56, Aisin 69RC or 68RC transmission. Two TPS versions for these years. Check which TPS you have in your truck before purchase of new part.

MOPAR Accelerator Pedal Position Sensor (TPS) with non-Adjustable Pedal (‘07-‘08)

MOPAR Accelerator Pedal Position Sensor (TPS) with Adjustable Pedal (‘07-‘08)

MOPAR Accelerator Pedal Position Sensor (TPS) with Pedal (‘05-‘06)

Manual Transmission APPS Replacement Harness (‘03-‘04)

MOPAR Throttle Position Sensor (‘03-‘04) Mounts beneath the driver’s side battery. For manual transmission trucks. AFTERMARKET Throttle Position Sensor (‘98.5-‘04, 24V) This TPS fits trucks equipped with either a manual or automatic transmission. Once installed, calibration is required. ( Instructions included.)

I

NOTE: Only works on trucks equipped with APPS installed on bellcrank assembly, not under the driver’s side battery.

I

BD APPS Noise Isolator  (‘94-‘04, 5.9L) Remove the interference in the throttle position sensor circuits (APPS) on Dodge Cummins engines from ‘94 to ‘04 that will create false voltage readings in the APPS/ TPS circuit and cause the lock-up torque converter to rapidly cycle on and off as you drive.

MOPAR TPS Repair Connector Kit - Manual Transmission  (‘03-‘04, 5.9L 2500/3500)

2003-2009 THIRD GENERATION

TPS68043161AD $156.95

MOPAR Crankcase Breather Tube - Small  (‘06-‘07)

05179092AB $19.95

MOPAR Crankcase Breather Tube - Large  (‘06-‘07)

05179093AB $25.95

CUMMINS Crankcase Breather Oil Drain Tube  (‘03-‘05, 5.9L) Replace the oil drain tube when the rubber couplers tear or get brittle and break due to age (Small).

5265106 $29.95

CUMMINS Crankcase Breather Vent Tube  (‘03-‘05, 5.9L) Replace the vent tube when the rubber couplers tear or get brittle and break due to age (Large).

5265108 $23.95

TPS53034160AE $193.95

TPS53034003AC $169.95

NEW! TPS53034004AE $167.95

TPS53032794AB $189.95

MOPAR Diesel Particulate Filter (DPF) Pressure Sensor  (‘07.5-‘12, 6.7L)

5149229AA $169.95

CUMMINS Crankcase Pressure Sensor  (‘07.5-‘20, 6.7L) Mounted on top of valve cover behind CV filter.

5462277 $58.95

CUMMINS Fuel Injector Harness to Valve Cover Harness (‘06 & ‘20, 5.9L & 6.7L)

5395297 $30.95

CUMMINS Intake Air Temperature Sensor(‘07.5-‘19, 6.7L)

2897332 $61.95

TPS0304RH $94.95

TPS53032456AE $299.95

TPS98502 $169.00 H TDBG, Vintage ‘94-‘04 Lock/Unlock

BD-1300030 $29.00

68032364AA $59.95

MOPAR Intake Air Temperature Sensor/MAF (‘03-‘07, 5.9L)

68430063AB $79.95

MOPAR Intake Air Temperature Sensor Connector Repair Kit (‘03-‘07, 5.9L) 2 wire connector for sensors 4984570 & 68430063AA. May fit other sensors.

05143777AA $30.95

CUMMINS Diesel MAP Sensor  (‘03-‘07, 5.9L)

3971106 $69.95

CUMMINS Diesel MAP Sensor  (‘07.5-‘18, 6.7L) Mounted in intake plenum.

2897333 $35.95

CUMMINS Crankcase Vent Filter  (‘07.5-‘19) Replaces the filter on top of the valve cover assembly. The suggested change interval is 67,500 miles. Find gasket #3999820 for install on page 6.

CV520010 $76.95

Aftermarket Water-in-Fuel Sensor Repair Connector  (‘07.5-‘19, 6.7L) Also works with ‘98.5 to ‘02 fuel lift pump.

CUMMINS Crankcase Vent Filter  (‘03-‘05) Replaces the filter on top of the valve cover assembly.

3957987 $72.95

CUMMINS Diesel MAP Sensor Repair Connector  (‘07.5-‘18, 6.7L) For Sensor #2897333

5299163 $60.95

CUMMINS Crank/Cam Position Sensor (‘03-‘18, 5.9L & 6.7L)

2872277 $28.95

DORMAN Throttle Pedal and Shift Linkage Bushing Kit (‘03-‘09) Assorted bushings.

24 l Ram Turbo Diesel Parts & Accessories  #107

DRM14041 $4.95

GG-RC68610 $8.95

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


2003-2009 THIRD GENERATION

CUMMINS Air Intake Grid Heater Kit (‘98.5-‘07) Includes (2) 3969988 gaskets for installation.

3969987-KIT $129.95

CUMMINS Turbo Speed Sensor  (‘07.5-‘12, 6.7L)

5550064 $198.95

MOPAR Grid Heater Relay (‘06-‘18) (1) required per vehicle.

5187880AC $59.95

CUMMINS Turbo Speed Sensor Wiring Harness  (‘07.5-‘18, 6.7L) For speed sensors #5550064 & #5550060.

3164369 $30.95

DORMAN Grid Heater Relay (‘06-‘18)

DRM904300 $35.95

BD Diesel OEM Turbo Wastegate Solenoid  (‘04.5-‘07, 5.9L)

BD-4036054 $174.00

MOPAR Air Intake Grid Heater Relay (‘03-‘05) (2) required per vehicle.

68188370AA $35.95

CUMMINS Stock Turbo Wastegate Solenoid  (‘04.5-‘07, 5.9L)

4036054 $535.00

DORMAN Grid Heater Relay (‘03-‘05) (2) required per vehicle.

DRM904356 $25.95

MOPAR Wastegate Solenoid Repair Harness Connector Kit (‘03-‘07, 5.9L)

68043086AC $16.50

MOPAR Grid Heater Fusible Link (‘06-‘09, 2500/3500 & ‘08-’10, 3500/4500/5500 CC)

56051717AB $39.95

BD Wastegate Actuator Kit (‘03-‘07, 5.9L)

BD-1047154 $239.00

MOPAR Exhaust Back Pressure Sensor Tube (‘07.5-‘12)

68038087AA $48.95

CUMMINS Oil Cooler  (‘07.5-‘20, 6.7L)

3975818 $224.95

MOPAR EGR Exhaust Gas Temperature Sensor (‘07.5-‘12, 6.7L)

5149085AC $42.95

CUMMINS Oil Cooler  (‘03-‘07, 5.9L)

3959031 $236.95

CUMMINS EGR Exhaust Gas Temperature Sensor (‘07.5-‘19, 6.7L)

2872858 $53.95

68RFE Transmission Oil Dipstick  (‘07.5-‘20, 6.7L)

53034117 $14.50

CUMMINS Exhaust Pressure Sensor (‘07.5-‘18, 6.7L)

4928594 $127.95

MOPAR Transmissions Dipstick  (‘03-‘07.5, 5.9L) 47RE and 48RE

53034117 $12.26

CUMMINS Coolant Temperature Sensor  (‘98.5-‘02) & (‘04.5-‘20)

4954905 $19.95

CUMMINS Engine Oil Dipstick/Handle  (‘03-‘07, 5.9L) Flat blade style. Length: 44.5”

3959009 $9.95

CUMMINS 2-wire Coolant Temp Connector Repair Kit  (‘98.5-‘02) & (‘04.5-‘20) Fits 4954905 coolant temp sensor.

5394261 $32.95

CUMMINS Engine Oil Dipstick/Handle  (‘07, 5.9L) Cable style. Length: 41”

CUMMINS Coolant Temperature Sensor (‘03-‘04)

4897224 $34.95

CUMMINS Engine Oil Dipstick and Handle  (‘07.5-‘20, 6.7L) Cable style. Length: 42”

4938970 $31.00

CUMMINS Oil Pressure Sensor  (‘07-‘18)

2882074 $55.00

CUMMINS Spring Hose Clamp (‘06-‘07, 5.9L) For heater hose #05179114AB (page 5). (Mopar #5179115AA)

4930327 $4.00

CUMMINS Oil Pressure Sensor  (‘02-‘06) 2002 single wire only.

4076930 $13.95

CUMMINS Spring Hose Clamp (‘03-‘07, 5.9L) For heater hose #3967022 & #05086822AB (page 5). (Mopar #5086819AA)

3930310 $4.25

Catalog good through April 2020 l Prices subject to change without notice.

REBUILD KITS & REPLACEMENT PARTS

2003-2009 THIRD GENERATION

68002976AA $72.95

Order 770-886-2500 or genosgarage.com 

l 25


REBUILD KITS & REPLACEMENT PARTS

2003-2009 THIRD GENERATION DAYCO Tensioner Pulley (‘03-‘20, 5.9L & 6.7L)

CUMMINS Idler Pulley (‘03-‘20, 5.9L & 6.7L)

GATES Idler Pulley (‘03-‘20)

GATES Tensioner Assembly (‘03-‘20, 5.9L & 6.7L)

CUMMINS Tensioner Assembly (‘03-‘20, 5.9L & 6.7L)

GATES Accessory Drive Belt Kit (‘03-‘12, 5.9L & 6.7L) Kit includes heavy-duty replacement serpentine belt, belt tensioner/idler pulley assembly. MOPAR Fan Clutch Connector Repair Kit (‘03-‘10, 6.7L 2500/3500) Main harness side.

2010-2020 FOURTH GENERATION DAYCO_89094 $20.45

4946708 $147.95

CUMMINS Crankcase Vent Filter  (‘07.5-‘19) Replaces the filter on top of the valve cover assembly. The suggested change interval is 67,500 miles. Find gasket #3999820 for install on page 6..

CV520010 $76.95

CUMMINS DPF Pressure Sensor  (‘07.5-‘12, 6.7L)

5149229AA $169.95

CUMMINS Crankcase Pressure Sensor  (‘07.5-‘20, 6.7L) Mounted on top of valve cover behind CV filter.

54662277 $44.95

CUMMINS Fuel Injector Harness to Valve Cover Harness (‘06 & ‘20, 5.9L & 6.7L)

5395297 $30.95

GATES-36315 $59.95

GATES-38285 $84.95

3947574 $124.95

GATES-90K38285 $176.95

68052582AB $64.95

MOPAR Grid Heater Relay (‘06-‘18) One per vehicle.

5187880AC $59.95

MOPAR Grid Heater Fusible Link (‘06-‘09, 2500/3500 & ‘08-’10, 3500/4500/5500 CC)

56051717AB $39.95

Also fits ‘11-‘12 #68155609AA fan clutch on fan clutch side.

CUMMINS Bell Housing Adapter Seal (‘03-‘18) This seal goes between the bell housing adapter and camshaft.

OEM Vacuum Pump Diaphragm for Jacobs Exhaust Brake (‘03-‘07, 5.9L)

OEM Heavy-Duty Vacuum Pump Diaphragm for Jacobs Exhaust Brake (‘03-‘07, 5.9L)  1 year manufacturer warranty.

OEM Vacuum Pump for Jacobs Exhaust Brake (‘03-‘07, 5.9L) With pulley. Instructions included. 1 year manufacturer warranty.

DORMAN Windshield Washer Fluid Reservoir (‘06-‘09, 2500/3500)

MOPAR Replacement Oil Cap (‘98.5-‘20)

MOPAR Power Steering Pump Reservoir Cap (‘03-‘07)

4945701 $2.95

SALE PRICE! GD_GG09_ DIPH_0307 $79.00

SALE PRICE! GD_GG09_HDDIPH $99.00

SALE PRICE! GD_GG09_ 0307_PUMP $239.00

DRM603214 $61.00

68003321AA $24.95

MOP-52106856AC $17.95

MOPAR Hood Strut (‘03-‘09)

55276321AC $46.95 each

Hood Pad Retaining Clip Kit (‘94-‘02) This kit has all 15 clips required to replace the broken clips and put the hood pad back where it belongs.

GG-HOODCL $9.95

26 l Ram Turbo Diesel Parts & Accessories  #107

CUMMINS Mass Flow Sensor  (‘07.5-‘18, 6.7L) Mounted on air filter housing.

MOPAR MAF Sensor Repair Connector  (‘07.5-‘18, 6.7L) Repair connector for Sensor #4984760.

4984760 $109.95

5013979AB $48.95

CUMMINS Intake Air Temp Sensor (‘07.5-‘19, 6.7L)

2897332 $61.95

CUMMINS Diesel MAP Sensor  (‘07.5-‘18, 6.7L) Mounted in intake plenum.

2897333 $38.95

CUMMINS Coolant Temperature Sensor  (‘98.5-‘02) & (‘04.5-20)

4954905 $19.95

CUMMINS 2-wire Connector Repair Kit  (‘98.5-‘02) & (‘04.5-‘20) Works with 4954905.

3163923 $32.95

CUMMINS Crank/Cam Position Sensor (‘03-‘18, 5.9L & 6.7L)

2872277 $28.95

MOPAR Wiring Repair Kit  (‘03-‘18, 5.9L & 6.7L) Works with 2872277.

5014010AB $26.95

MOPAR Exhaust Back Pressure Sensor Tube  (‘13-‘18, 6.7L)

68290469AA $113.95

MOPAR EGR Exhaust Gas Temperature Sensor (‘13-‘18, 6.7L)

68085774AB $26.95

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


2010-2020 FOURTH GENERATION

MOPAR EGR Exhaust Gas Temperature Sensor (‘07.5-‘12, 6.7L)

5149085AC $42.95

CUMMINS EGR Exhaust Gas Temperature Sensor (‘07.5-‘19, 6.7L)

2872858 $53.95

CUMMINS Exhaust Pressure Sensor (‘07.5-‘18, 6.7L)

4928594 $127.95

MOPAR EGT Sensor Connector Repair Kit (‘13-‘18, 6.7L) 2 wire connector for sensor #68085774AB. May fit other sensors.

68242368AB $42.95

GATES-38285 $84.95

GATES Tensioner Assembly (‘03-‘20, 5.9L & 6.7L)

CUMMINS Tensioner Assembly (‘03-‘20, 5.9L & 6.7L)

3947574 $124.95

GATES Accessory Drive Belt Kit (‘03-‘12, 5.9L & 6.7L) Kit includes heavy-duty replacement serpentine belt, belt tensioner assembly and idler pulley.

GATES-90K38285 $176.95

MOPAR Fan Clutch Connector Repair Kit (‘11-‘12, 6.7L 2500/3500) Main harness side.

68032864AA $83.95

Also fits ‘03-‘10 #68155609AA fan clutch on fan clutch side.

CUMMINS Turbo Speed Sensor  (‘13-‘18, 6.7L)

5550060 $212.00

CUMMINS Turbo Speed Sensor  (‘07.5-‘12, 6.7L)

5550064 $212.00

CUMMINS Turbo Speed Sensor Wiring Harness  (‘07.5-‘18, 6.7L) For speed sensors #5550064 & #5550060.

3164369 $30.95

68RFE Transmission Oil Dipstick  (‘07.5-‘20, 6.7L)

MOPAR Hood Strut (‘10-‘18)

Hood Pad Retaining Clip Kit (‘94-‘02) This kit has all 15 clips required to replace the broken clips and put the hood pad back where it belongs.

53034117 $14.50

5160343 $35.95 each

GG-HOODCL $9.95

REBUILD KITS & REPLACEMENT PARTS

2010-2020 FOURTH GENERATION

2014-2020 RAM 1500 ECODIESEL CUMMINS Oil Pressure Sensor  (‘07-‘18)

2882074 $55.00

CUMMINS Lower Radiator Inlet Hose Adapter Ring Seal (‘94-‘20) For inlet hose to engine block.

3906697 $3.95

MOPAR Replacement Oil Cap (‘98.5-‘20)

68003321AA $24.95

CUMMINS Oil Cooler  (‘07.5-‘20, 6.7L)

CUMMINS Engine Oil Dipstick and Handle  (‘07.5-‘20, 6.7L) Cable style. Length: 42”

DAYCO Tensioner Pulley (‘03-‘20, 5.9L & 6.7L)

CUMMINS Idler Pulley (‘03-‘20, 5.9L & 6.7L)

GATES Idler Pulley (‘03-‘20)

MOPAR Engine Oil Fill Cap and Neck (‘14-‘18)

68229365AA $69.95

MOPAR MAP Sensor (‘14-‘18)

68211211AA $89.95

MOPAR Oxygen Sensor (‘14-‘18)

68171190AA $79.95

MOPAR DPF Outlet Exhaust Temperature Sensor (‘14-‘18)

05146663AD $102.95

MOPAR DPF Inlet Exhaust Temperature Sensor (‘14-‘18)

05146662AD $97.95

MOPAR Manifold Exhaust Temperature Sensor (‘14-‘18)

68383247AA $225.95

MOPAR Engine Oil Drain Plug (‘20)

6506214AA $12 .95

3975818 $224.95

4938970 $31.00

DAYCO_89094 $20.45

4946708 $147.95

GATES-36315 $59.95

Catalog good through April 2020 l Prices subject to change without notice.

GATES Tensioner Assembly (‘14-‘18)

GATES-39343 $159.95

GATES Idler Pulley  (‘14-‘18)

GATES-38018 $12.95

Order 770-886-2500 or genosgarage.com 

l 27


FUEL PUMPS & FUEL SYSTEM PARTS/ACCESSORIES

New and Remanufactured Fuel Injectors

Lack of maintenance and poor fuel filtration can shorten injector life. If you have trouble with one, the other five will fail shortly thereafter. The labor for one is the same as the labor for six. The replacement parts decision involves serious money and repair time. We offer these new and reman injectors for ‘89-‘07 trucks. Now you have the best of both, a manufacturer and vendor you can rely on.

OEM Fuel Injector Lines (‘89-‘18) CUMMINS #1 4935981: $62.00 CUMMINS #2 4935982: $67.00

‘07.5-‘18 6.7L

Not Chassis Cab trucks.

REMAN

Not Chassis Cab trucks.

REMAN

‘04.5-‘07, 5.9L BSH-0986435505: $368.00

REMAN

‘03-‘04, 5.9L BSH-0986435503: $368.00

CUMMINS #6 4935976: $64.00

CUMMINS #1 3957081: $27.95

‘07.5-‘12, 6.7L BSH-0986435518: $439.95

CUMMINS #2 4988810: $33.95

‘03-‘07 5.9L

No core charge for 1989-2002 injectors.

NEW NEW NEW

CUMMINS #3  4988809: $34.95 CUMMINS #4 5289447 $66.50 CUMMINS #5 4988807: $39.95 MOPAR #6 05086786AD: 79.95

NEW ‘98.5-‘02, 24V-RV (275HP) BSH-0432193635: $85.00 2003 to 2018 injectors have a core charge of $150 each refundable upon return of the core.

CUMMINS #4 4935974: $65.00 CUMMINS #5 4935974: $65.00 MOPAR Supply Line  68005436AA: $77.95 Injection pump to fuel rail.

‘13-‘18, 6.7L BSH-0986435621: $439.95

REMAN

CUMMINS #3  4935982: $67.00

CUMMINS Supply Line  3957079: $47.95 Injection pump to fuel rail.

‘00-‘02, 24V HO (245HP) BSH-0432193581: $102.00 ‘98.5-‘02, 24V (235HP)

Manual Transmission BSH-0432193629: $102.00

‘98.5-‘02, 24V (235HP)

Automatic Transmission BSH-0432193630: $108.00

‘96-‘98 (215HP)

NEW

Manual Transmission BSH-0432133844: $104.00

‘98.5-‘02

#3  3943769: $106.00

5.9L, 24V

#4 3943771 $106.00 #5 3943773: $97.00

‘96-‘98 (180HP)

NEW

Automatic Transmission BSH-0432133860: $104.00 and California only.

NEW

‘94-‘95 (175HP) Manual Transmission BSH-0432133860: $104.00

NEW

#1 3943765: $97.00 #2 3943767: $106.00

#6 3943775: $106.00 #1 3925805: $110.00 #2 3925806: $93.95 #3  3925807: $110.00

‘94-‘95 (160HP)

Automatic Transmission BSH-0432133859: $104.00

‘91.5-‘93

NEW

with Intercooler BSH-0432133877: $104.00

NEW

‘89-‘91 without Intercooler BSH-0432133888: $104.00

Your old injector cores are required back. Whatever you do, stay with OEM Reman injectors and “get it right” the first time around rather than going with an aftermarket injector and having to do the job twice. Our website has the full story on injectors (See the “Perfect Collection,” pages 19-31), along with the how-to to save you the labor time (about six hours) should you wish to do the job yourself.

#4 3925808: $110.00

‘94-‘98

#5 3925809: $110.00

5.9L, 12V

#6 3925810: $98.00 CUMMINS Supply Line  3918880: $42.95 Lift pump to fuel filter. Return Line  3926103: $113.95 #1 3920233: $69.95 #2 3920234: $69.95 #3 3920235: $69.95

‘91.5-‘93

#4 3920236: $69.95

5.9L

#5 3920237: $69.95 #6 3920238: $69.95

Crossover Tubes, Injector Seals & Gaskets

Return Line  3909696: $95.95

‘98.5-‘02

#1 3909438: $56.95 #2 3903486: $56.95

‘03-‘18

CROSSOVER TUBE & INJECTOR SEALS CROSSOVER TUBES WITH O-RING ‘03-‘18, 5.9L & 6.7L  2872288:  $48.95 ‘98.5-‘02, 24V  3936953:  $39.95 CROSSOVER TUBE O-RING ‘03-‘18, 5.9L & 6.7L  4062328:  $2.50 ‘98.5-‘02, 24V  3867043:  $3.00 INJECTOR COPPER SEAL ‘03-‘18, 5.9L & 6.7L  3937142:  $3.15 ‘98.5-‘02, 24V  3906659:  $3.50

GASKETS & GROMMETS FUEL RETURN LINE GROMMET ‘98.5-‘02, 24V  3905351:  $12.95 ‘89-‘93, 12V  3905391:  $11.50 FUEL SUPPLY LINE GROMMET ‘89-‘93, 12V  3905351A:  $12.95

#4 3903488: $56.95

5.9L

#5 3903489: $56.95 #6 3903490: $56.95 Return Line  3909696: $95.95

GASKETS

INJECTOR RETURN BANJO BOLT 89-‘98, 12V  4942278:  $3.50 Horseshoe shaped gasket. 1 per injector.

‘03-‘18, 5.9L & 6.7L F00RJ01831:  $59.95

DEF Injector (‘13-‘20) DEF INJECTOR WITH GASKET ‘13-‘20, 2500/3500 & ‘14-‘18, 1500 4627241AF:  $245.95

INJECTOR O-RING SEAL ‘03-‘18, 5.9L & 6.7L  2430210081:  $2.95 ‘98.5-‘02, 24V  3029820:  $3.50

CROSSOVER TUBES WITH O-RING

#3 3903487: $57.95

‘89-‘91

‘98.5-‘02, 5.9L, 24V F00ZR20002:  $22.95

28 l Ram Turbo Diesel Parts & Accessories  #107

DEF INJECTOR GASKET ‘13-‘20, 2500/3500 & ‘14-‘18, 1500 4627714AA:  $4.95 UREA TANK MODULE SEAL AND O-RING ‘13-‘20, 2500/3500 & ‘14-‘18, 1500 ECODIESEL 68101172AA :  $23.95

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


‘03-‘09, 5.9L & 6.7L

FUEL DISTRIBUTION BLOCK KITS ‘10-‘18, 6.7L BD-1050371:  $125.00 ‘03-‘09, 5.9L & 6.7L BD-1050370:  $125.00

STANDARD KIT (3/8” DIA. FUEL HOSE) VULCANRELOKIT:  $79.95 ‘BIG LINE’ KIT (1/2” DIA. FUEL HOSE) VULCAN_VPPS9802-KIT:  $116.00

This kit enables owners of ‘98.5-‘02 trucks to relocate the engine’s problematic fuel transfer pump. The kit consists of a bracket; 3/8” diameter B-20 bio-diesel compatible fuel hose rated at 50 psi; electrical extension; and custom fittings. The benefits of relocation: the transfer pump is not subjected to continual engine vibration; the transfer pump is closer to the fuel tank and operates more like a pusher pump; and should the pump fail, the pump is now very easy to access. The optional ‘Big Line’ Kit with 1/2” fuel line is a high-performance version of the Standard Kit designed for use in high horsepower trucks. Detailed instructions are included which show you how to move the fuel transfer pump from the engine to the frame rail. NOTE: Fuel transfer pump is not included in Relocation Kit.

Airtex brand fuel pumps available at your local parts store will work with these fuel transfer pump relocation kits. The Airtex fuel pump mounts horizontally rather than vertically like the OEM fuel pump. (see photo.) To mount the pump, simply flip the bracket so that the short tab is mounted to the frame.

 THROTTLE LINKAGE ROD Kits ‘94-‘98 3932317:  $99.95

‘91-‘93

(Threaded rod measures 4-7/8”)

‘10-‘18, 6.7L

Fuel Filter Kit (‘97-‘99) ‘98.5-‘99, 24V FFK98599: $133.95 ‘97-‘98, 12V FFK9798: $130.95

Has your ‘97-‘99 Turbo Diesel developed a leak at either the top of the fuel filter housing or at the O-ring area of the fuel heater due to years of use and material fatigue? Have you tried to source a replacement kit from Chrysler or Cummins only to find it is no longer available or ridiculously priced? Here is a cost-effective solution: use a replacement filter head and corresponding filter/water separator from the ‘94 to ‘96 vintage truck. The Fuel Filter Kit includes:

‘94-‘98

Billet aluminum filter head • Water-in-fuel sensor • 4 banjo fitting gaskets FS1253 fuel filter for ‘97-98, 12V and FS19519 for ‘98.5-99, 24V To make the water-in-fuel sensor operative you simply cut and splice into the existing wire leads to the sensor. ‘91-‘93

4089077:  $63.95

‘89-‘91

These billet aluminum blocks are used to replace the factory fuel filter housings after the installation of an aftermarket fuel pump/filtration system (FASS, etc.). All mounting hardware and fuel fittings are included. Also has pressure ports for checking fuel pressure.

NOTE: Kit does not have provisions for the fuel heater unit on ‘98.5-‘99 trucks.

If the fuel heater unit on your ‘98.5-‘99 truck is leaking, we have a Fuel Heater Block Off that solves the problem. See page 31. ‘89-‘91

FUEL PUMPS & FUEL SYSTEM PARTS/ACCESSORIES

Fuel Transfer Pump Relocation Kits (‘98.5-‘02)

4089076:  $63.95

BILLET ALUMINUM FUEL FILTER HEAD KIT (‘94-’96)

Replace a worn throttle linkage with either of these new kits from Cummins and restore proper throttle function.

‘94-‘96 Dodge Cummins fuel filter heads are no longer available from Chrysler so we sourced our own. Made from billet aluminum, this filter head is a direct bolt-on replacement of the OEM part.

(Threaded rod measures 4-1/4”)

GG-3925600KIT:  $89.95

Please compare to your original throttle linkage rod before ordering.

 THROTTLE RETURN SPRINGS (‘94-’98, 12V)

 THROTTLE ROD endS & STUDS (‘91-’98, 12V)

HEAVY SPRING TWO CLIPPED ENDS 3933130:  $49.50

P7100 THROTTLE LEVER BALL STUD ‘94-‘98, 3990112:  $8.95

LIGHT SPRING TWO CLIPPED ENDS 3931510:  $18.95

RIGHT HAND THREAD ‘94-‘98, 3990095:  $14.95

STD. SPRING - CLIPPED/ METAL HOOK ENDS 3925377:  $22.95 STD. SPRING METAL HOOK ENDS 3923058:  $10.95

1-13/16 / 45mm long.

RIGHT HAND THREAD ‘91-‘98, 3990093:  $11.95

It can also be used on other applications. The Fuel Filter Head Kit includes: Replacement Filter Head • (4) Banjo Bolt Gaskets • Filter Nipple If you would like to upgrade banjo bolts or add fuel pressure, see the fittings on page 31.

BILLET ALUMINUM

FUEL CANISTER CAP

‘10-‘19 LT-67FUELCAP:  $80.95

Is your plastic fuel filter canister cap showing the signs of aging? You know, the rounded-off shoulders of the 28mm hex head. We’ve also seen the caps over-torqued and cracked. Here is a stylish and functional solution. A billet aluminum fuel cap that fits the 2010-newer Ram 6.7-liter Cummins Diesel engines.

15/16 / 33mm long.

LEFT HAND THREAD ‘91-‘98, 3990094:  $42.95 OEM throttle rod ends have short threads.

Catalog good through April 2020 l Prices subject to change without notice.

FUEL FILTER CAP WITH FUEL PRESSURE TEST PORT ‘00-‘07, 5.9L LT-59FUELCAP:  $69.50

Black anodized billet aluminum with 1/8” pressure port and a 3/4” hex head for easy removal.

Order 770-886-2500 or genosgarage.com 

l 29


FUEL PUMPS & FUEL SYSTEM PARTS/ACCESSORIES

80 GPH

 INGATURE SERIES S Adjustable Fuel Pump Dodge Replacement Fuel Lift Pump (‘98.5-‘04.5) ‘98.5-‘02  FASS_DRP_02:  $297.35 ‘03-‘04.5  FASS_DRP_04:  $341.05

Includes: (6) banjo gaskets to make install easier. NOTE: The DRP is designed as a stock replacement pump. It will not meet the needs of hi-performance (over 300hp) applications.

‘10-‘14 FASS_FAS_D05_100G: $592.80

(1/2” Fuel Line Kit, 1/2” Suction Tube Kit, and Wiring Harness)

‘05-‘09 FASS_FAS_D07_100G: $592.80

(1/2” Fuel Line Kit, 1/2” Suction Tube Kit, and Wiring Harness)

95 GPH

‘98.5-‘04.5 FASS_FAS_D08_100G: $535.80 (1/2” Fuel Line Kit and Wiring Harness)

FASS High-Performance Fuel Pump for ‘98.5-‘04.5 trucks DOES NOT include a draw straw for the fuel tank.

The Dodge Replacement Pump (DRP) gives you the dependability of a FASS product without the cost of a complete system. An additional benefit is that fuel flow is increased by 33%.

The FASS High-Pressure fuel pump kit lets place the fuel transfer pump underneath the truck bed frame rail. The HPFP adjsutable fuel pump will support stock to 600 horsepower levels.

We’re excited to sell the FASS DRP product. Its availability allows us to offer several fuel transfer pump options to our customers.

The fuel pump kit includes all hardware for installation. Fuel pump comes with a LIFETIME WARRANTY from FASS.

The DRP provides 80gph of fuel. The DRP-02 mounts in the stock location on the side of the engine. The DRP-04 relocates the pump to the side of the truck’s frame below the fuel cannister. The DRP kits come complete with all of the neccessary hardware for the relocation of the pump and instructions to make the installation straightforward. DRP fuel lift pumps are not compatible with waste vegetable oil (WVO) or B20 or higher biodiesel fuels. DRP pump comes with a 4-YEAR WARRANTY from FASS.

FASS/VULCAN Relocation Bracket FASS_VULCAN BRACKET:  $7.95 If you have relocated the existing fuel transfer pump (see our “Vulcan Relo Kit”) you will need a FASS/VULCAN Relocation Bracket for use with the DRP.

Titanium SIGNATURE SERIES Fuel Pump and Double Filter ‘19-‘20, 2500/3500 - 100GPH FASS_TS_D12_100G: $730.55 NEW! ‘05-‘18, 2500/3500 - 100GPH FASS_TS_D07_100G: $730.55 ‘98.5-‘04.5, 2500/3500 - 100GPH FASS_TS_D08_100G: $673.55 ‘14-‘18, 1500 EcoDiesel - 110GPH FASS_TS_D11_110G: $920.55 NEW! Fuel pumps include installation and mounting hardware.

100

Whisper Technology helps reduce the noise created by aftermarket fuel and air separation diesel lift pumps. By using radius cuts, tighter tolerances on all gears and a high quality military Spec’d Coating over the aluminum base, FASS Fuel Systems was able to develop the quietest fuel air separation system on the market. This FASS Fuel Pump and Filter will support horsepower levels from stock to 600 horsepower. Each kit comes with a LIFETIME WARRANTY from FASS.

FASS FUEL PUMP PARTS & ACCESSORIES

FLEETGUARD - FASS Fuel Filter Older Titanium 95 Series only with red or blue “T” block assembly. (3 micron)  Replaces FF2003

FF5712: $10.50

FLEETGUARD - FASS 150 HD Series Large filters - 8” tall.

FS-1001: $29.45

FASS - FASS 150 HD Series Large filters - 8” tall. (3 micron)  Replaces HF6604

FF-1003: $29.95

FLEETGUARD - FASS Titanium & Platinum Series Titanium & Platinum Series only with black or grey “T” block assembly. (2 micron) Fuel filter and water separator.

XWS-3002: $29.45

FASS - Signature Series Paticulate Filter Signature Series with black “T” block and Legacy Series with grey ‘T’ block. PF-3001: $20.90 (144 micron - 25GPM) FASS - DRP In-line 5/16” Pre-Filter For DRP-02 fuel pumps.

NA-33007: $3.99

Donaldson Fuel/Water Separator For the FASS Platinum High Pressure Fuel Pump and newer Titanium fuel pumps. (FASS-P-D07-095G, FASS-P-D08-095G, FASS -T-D07-095G & FASS-T-08-095G) .

P553203: $31.95

FF5079: $8.95

Adapter Nipple FSN-2001: $6.95 Required to use XWS-3002 on Red ‘T’ Block and Blue ‘T” block assemblies.

Fuel Transfer Pump (‘94-‘98, 12V)  I PUMP_4988747:  $114.95 Includes gaskets and stud kit.

FUEL DELIVERY PRODUCTS

‘11-‘18, 2500 & ‘11-‘18, 3500 Fuel Pump Module and Assembly

PUMP-P77037M: $298.95

‘07-‘10, 3500 Chassis Cab ‘08-‘10, 4500/5500 Rear Mount Fuel Pump Module Assembly

PUMP-P76869M: $359.00

‘07-‘10, 3500 Chassis Cab ‘08-‘10, 4500/5500 Front Mount Fuel Pump Module Assembly

PUMP-P76870M: $110.00 PUMP-P76611M: $155.00

‘05-‘09, Electric In-Tank Fuel Pump For short bed trucks with 34 gallon fuel tank. *Not compatible with Cab/Chassis trucks.

PUMP-P76148M: $133.00

‘03-‘04, Electric Fuel Pump Mounts on the back of the fuel filter cannister.

PUMP-P76110: $139.00

NEW! 32283: $118.75

‘98.5-‘04, Electric In-Tank Fuel Pump For trucks with in-tank fuel pump conversion. 34 or 35 gallon fuel tank.

PUMP-P76473M: $169.00

NEW! STK-1005: $94.05

‘89-‘93 12V, Mechanical Fuel Pump Diaphragm type. Includes gasket and stud kit.

PUMP-M73060: $38.00

FASS - Titanium Fuel Pump Heater Kit For extremely cold climates.

HK-1001: $151.05

FASS - High Output Fuel Heater Disk Kit Includes harness.

NEW! HK-1002: $151.05

FASS - Y-Splitter Used for installing two #32283 heater probes.

NEW! HKS-1001: $37.05

30 l Ram Turbo Diesel Parts & Accessories  #107

FS19594: $14.95

‘05-‘09, Electric In-Tank Fuel Pump For long bed trucks with 35 gallon fuel tank. *Not compatible with Cab/Chassis trucks.

See our website for more details.

FASS - Suction Tube Kit Bypasses in-tank fuel pumps.

FLEETGUARD - FASS Fuel/Water Separator 0lder Titanium 95 Series only with red or blue “T” block assembly. Replaces WS2001/FS19768

Universal In-line Fuel Filter Screen This 3/8” filter required when using the DDRP with Vulcan Relo Kits.

The FASS 95 Titanium fuel pump and filter kit with FASS Whisper Technology offers a reliable high volume pump that provides a GPH consistent flow of fuel (100 GPH) to your injection pump. Each kit comes with a 3 micron fuel filter and fuel/ water separator since the kit will bypass your factory fuel filter housing and go directly to your fuel injection pump.

FASS - Replacement Heating Element Probe For Titanium Series heaters used in HK-1001 heater kit.

FASS FUEL PUMP FUEL FILTERS  See our website for more details.

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


Fuel Pressure Test Kit (‘98.5-‘02, 5.9L) This kit is a 2-1/2” liquid filled 0-30 psi gauge in a stainless steel housing with a built in snubber, Weatherhead 250 psi hose, brass push-lock fittings and brass VULCAN_TEST_KIT schraeder valve actuator for ‘00-‘02 $59.00 trucks (with rubber seal and knurled thumb screw). Ships with 1/8 NPT fitting for use with ‘98.5-‘99 trucks. NOTE: Purchase the FPADPT-KIT to allow you to check the fuel pressure on all ‘89‘97, 12V and ‘03-‘07, 24V trucks. VULCAN Draw Straw I (‘94-‘04) The CNC machined billet Draw Straw I features dual ports which allows the user to install a regulated return fuel system without drilling the top of the module or cutting the filler neck tube for a second return line. This makes for a clean and secure installation. Works with 3/8” and 1/2” fuel line.

VULCAN-DS3 $32.80

VULCAN Draw Straw V (‘98.5-‘17) The Draw Straw V HiFlow allows for greater fuel volume by using 1/2” plumbing. The DSV installs inside the tank module in place of the factory pump on fuel systems/tanks in ‘05-‘09 trucks. You can use the original OEM supply connection as the FASS return line putting more fuel back into the module for low fuel level situations. No tank drilling! A simple 5/8” inch hole in the module is all that’s required to insert the DSV HF fitting. Works with 3/8” and 1/2” fuel line.

VULCAN-DS5 $67.99

VULCAN-VP02 $40.00

Catalog good through April 2020 l Prices subject to change without notice.

FPADPT-KIT $21.95

GATES-27324 $2.00/ft. 3/8” DIAMETER

GATES-27325 $2.00/ft. 1/2” DIAMETER

GATES-27326 $2.25/ft.

Auto Meter Fuel Pressure Snubber If you are installing an AutoMeter electric fuel pressure gauge in your Ram Cummins truck, you MUST install this braided stainless steel line kit and #3279 fuel pressure snubber to prevent premature failure of the sending unit. Failure to do so will void the gauge warranty.

AM-3227 $56.95

Auto Meter Fuel Pressure Snubber Recommended on all AutoMeter electric fuel pressure gauges installed in Ram Cummins trucks.

AM-3279 $25.95

1/8 NPT RLT Snubber It is highly recommend that you use this snubber on trucks with the VP44 injection pump to dampen the fuel pulsations (hydraulic hammering) created by the injection pump.

RLT-SNUBBER $8.00

Fuel Filter Plug (‘89-‘96) This billet aluminum plug is handy to have when your truck’s water-in-fuel sensor/drain fails and is leaking fuel. Install it and stop the leak.

VULCAN-FH $23.00

GG-FPSNUB-KIT $26.95

5/16” DIAMETER

GATES Barricade® Fuel Line Heavy Duty replacement fuel hose. Will work with Diesel, Bio-Diesel, gas and other fuel types. We also offer 5/16” diameter fuel hose to repair/replace the problematic fuel return hose used on ‘94-‘98, 12-valve engines.

VULCAN Draw Straw III (‘98.5-‘18) The Draw Straw™ 3 Is the threaded version of the original Draw Straw 2 for use with plastic or metal tanks in Dodge trucks of 3/8” thickness or less. This unit is a single port billet aluminum fitting that requires a 3/4” hole to be drilled in the tank. This design keeps all threaded connections out of the tank so there is nothing to come loose inside. The 16” draw tube is compatible with all motor fuels.

VULCAN Universal Fit Fuel Pressure Line (‘98.5-‘02) This hose is 1/4” diameter (inside diameter), 30” in length, and is rated for 100 psi. The assortment of fittings for each end of the hose allow you to add a fuel pressure sending unit to the fuel system. Purchase a tapped banjo bolt to use this fuel pressure line on other year trucks.

Fuel Pressure Test Adapter (‘89-‘07, 5.9L) The Fuel Pressure Test Adapter allows for a quick and easy fuel pressure check on all Ram trucks with the Cummins Turbo Diesel engine. Testing the fuel pressure is a must when diagnosing fuel delivery problems. Kit includes: banjo fitting, gaskets, and Schraedar valve with cap.

VULCAN-DS1 $75.00

NOTE: Will not work on trucks equipped with and in-tank pump.

VULCAN Filter to Injection Pump Hose Kit (‘98.5-‘07, 5.9L) This hose connects the fuel filter outlet to the injection pump. It is great for those with a FASS HPFP or other systems who want to completely eliminate the restrictions in the fuel supply circuit.

Adjustable Fuel Pressure Gauge Needle Valve/Snubber Kit (‘89-‘07, 5.9L) This kit works with the VULCAN Universal Fit Fuel Pressure Line (VULCAN-FH).

Fuel Heater Block-Off (‘98.5-‘99) This fuel heater block-off allows you to remove the leaky fuel heater from the discontinued fuel filter top. Includes 2 Viton o-rings.

FUEL PUMPS & FUEL SYSTEM PARTS/ACCESSORIES

FUEL SYSTEM ACCESSORIES

GG-FFPLUG $12.95

GG-FHBO $16.95

Order 770-886-2500 or genosgarage.com 

l 31


FUEL PUMPS & FUEL SYSTEM PARTS/ACCESSORIES

1989-1993 FIRST GENERATION

FUEL SYSTEM ACCESSORIES CUMMINS Banjo Snubber 12MM x 1.5 thread (‘89-‘93 & ‘98.5-‘07, 5.9L) Dampens the pressure spikes of the Cummins lift pump. The snubber takes the place of a 12mm banjo bolt and makes fuel pressure gauge installation easy. (Gaskets included.) CUMMINS Banjo Snubber 14MM x 1.5 thread (‘94-‘98) Designed specifically for Cummins 5.9L diesel engines and dampens the pressure spikes of the lift pump. The snubber takes the place of a 14mm banjo bolt and makes fuel pressure gauge installation easy.  (Gaskets included.)

Barbed Banjo Fitting Clamp included with fitting.

‘89-‘93 & ‘98.5-‘09, 5.9L BF-BBS010 $23.99 12MM CUMMINS GASKET

BF-3963983 $3.00 each

‘94-‘98 BF-CBS010 $24.49

CUMMINS Fuel System Bleed Screw and Captive Washer (‘89-‘98, 12V)

3939570

CUMMINS Return Check Valve (‘89-‘98, 12V) (Requires 2 #3918188 washers.)

3924726

$7.95

$75.95

NEW! 1463456303 $10.95

BOSCH VE Pump Return Overflow Valve (‘89-‘93) (Requires 2 #BF-3963983 washers.)

3913695 $5.50

CUMMINS Fuel Heater Seal (‘89-‘93)

14MM CUMMINS GASKET

3963988 $3.95 each

M12 X 3/8 B1206: $7.49 each

GG-3925954 $16.95

GENO’S Fuel Pre-Heater Delete Nipple (‘89-‘93)

3925954 $21.95

CUMMINS Fuel Pre-Heater Delete Nipple (‘89-‘93)

M14 X 3/8 B1406: $7.49 each FS15 $19.95

AFTERMARKET Fuel Shut-Off Solenoid (‘89-‘93)

Individual Tapped (M12) Banjo Fittings (‘89-‘93 & ‘98.5-‘07, 5.9L) These Banjo Fittings feature a large diameter (.187” vs. .130”) fuel port. The fittings are SAE (3/4” hex) vs. the stock 17mm hex design. Fitting on the top is the standard fitting, while the fitting on bottom has a built-up hex drilled to accept a 1/8 NPT male threaded fuel pressure sensor. (Requires 2 replacement gaskets) Vulcan Performance Jacobs Brake Fuel Line Adapter This 1/2” 12MM adapter is designed for use with trucks equipped with a Jacobs Brake. When fitting a fuel line to the injection pump there is a clearance issue. Allows for pump clearance without using a restrictive banjo fitting. Vulcan Performance Modified Fuel Module (‘98-’04, 2500/3500) Replacement aftermarket fuel tank module without fuel pump. Uses factory 3/8” pickup and 5/16” return quick-connect fittings.

TAPPED BF-LONG-TAPPED $7.00 UNTAPPED BF-LONG-UNTAPPED $4.50 12MM CUMMINS GASKET BF-3963983 $3.00 each

VULCAN_PBF $17.95

DORMAN Water-in-Fuel Sensor (‘89-‘96)

DRM904193 $37.95

MOPAR Fuel Module Tank Seal (‘90-‘06) Works with OEM fuel modules.

52018808 $10.13

1994-2002 SECOND GENERATION

Will not work on trucks with “in tank” fuel pump conversions.

04897669AB $69.95

* NOTE: A lot of early trucks have had the fuel level sending units replaced or updated in the past. We recommend removing the module and confirming which sending unit is installed before ordering.

MOPAR Fuel Module Tank Seal (‘90-‘06) Works with OEM fuel modules.

52018808 $10.13

MOPAR Fuel Tank Module and Sending Unit (‘98-‘02) For trucks with no fuel pump. Includes tank seal.

4897668AF $329.95

VULCAN_MFM20E $199.99

Vulcan Performance Female Quick-Connect Fuel Fitting - to 1/2” Connects 3/8” quick connect to 1/2” barbed fuel fitting.

VULCAN_FQC68PL $8.50

Vulcan Performance Female Quick-Connect Fuel Fitting - to 3/8” Connects 3/8” quick connect to 3/8” barbed fuel fitting.

VULCAN_FQC6 $8.00

32 l Ram Turbo Diesel Parts & Accessories  #107

3831852-S $30.95

MOPAR Fuel Level Sending Unit  (‘00-‘02) 2500/3500

Freddy Frugal says this fuel module is less than half the price of OEM.

Fuel Pressure Tee Inline fuel pressure tee available in either 1/2”, 3/8” or 5/16” diameter barbed fittings with 1/8 NPT threaded fitting. Works well with aftermarket FASS fuel systems.

CUMMINS Water-in-Fuel Sensor (‘89-‘96)

1/2” DIA.

Fuel Tank Module and Sending Unit (‘96-‘97) For trucks with a 34 or 35 gallon fuel tank. Includes tank seal. (1994-1995 wiring adapter below.)

P74699R $204.95

FPT_1/2: $12.50 3/8” DIA.

FPT_3/8: $12.50 5/16” DIA.

FPT_5/16: $12.50

Fuel Tank Module Wiring Harness Adapter For ‘94-’95 Ram 2500/3500 trucks to use the ‘96-‘97 fuel tank module/sending unit.

GG-WHADAPT9495 $15.95

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


FLEETGUARD Service Kit for Fuel Heater/Prefilter (‘94-‘98, 12V) Service kit includes strainer screen, locknut, and gasket. Fuel Pre-Heater Bowl to Heater Element Gasket (‘94-‘98, 12V)

1994-2002 SECOND GENERATION 3845400S $8.95 NEW! GG-3842021 $4.95

FLEETGUARD Heater Element for Fuel Heater/Prefilter  (‘94-‘98, 12V) Upper gasket included.

3907766S $43.95

CUMMINS Fuel Pre-Heater Upper Gasket (‘94-‘98, 12V)

3834185S $2.95

FLEETGUARD Wiring Harness and Thermostat for Fuel Heater/Pre-filter (‘94-‘98, 12V)

CUMMINS Fuel Pre-Heater/Strainer Assembly (‘94-‘98, 12V) (2) 3939258 gaskets required. See page 7. Fuel Filter Heater O-Ring (‘98.5-‘99)

This Viton o-ring is an upgrade from an OEM part and will provide a longer lasting seal. CUMMINS 8MM Sealing Washer (‘94-‘98, 5.9L)

3843722S $54.95

3969698 $11.95

MOPAR Fuel Pre-Heater & Lift Pump – Fuel Elbow Hose  (‘94-‘98, 12V)

MOP-04746638 $29.20 3914284 $9.95

FLEETGUARD Fuel Heater Thermostat (‘00-‘07, 5.9L)

3900349S $14.95

DORMAN Fuel Filter Cap (‘00-‘07, 5.9L)

DRM904301 $20.95

AFTERMARKET Fuel Filter Canister Drain Valve (‘97-‘99)

GG-9799DV $55.95

CUMMINS Fuel System Bleed Screw and Captive Washer (‘89-‘98, 12V) CUMMINS Fuel Filter Return Banjo Bolt - 18mm port (‘98, 12V) Works with #3924726 fuel return check valve. Requires 2 BF-3918188 8mm banjo bolt washers. CUMMINS Fuel Filter Housing Banjo Bolt (‘89-‘98, 12V) Banjo bolt is for the #3939570 bleeder screw. Requires 2 BF-3963983 banjo bolt gaskets. CUMMINS Return Check Valve (‘89-‘98, 12V) (Requires 2 #3918188 washers.)

FLEETGUARD Fuel Canister Drain (‘00-‘02)

AFTERMARKET Water-in-Fuel Sensor Viton O-ring (‘97-‘99, 5.9L) This viton o-ring provides a superior seal compared to a standard rubber o-ring.

GG-OR9799WS $.75

FLEETGUARD Water-in-Fuel Sensor (‘00-‘07, 5.9L) 10mm thread.

3959454S $9.95

FLEETGUARD Water-in-Fuel Sensor (‘89-‘96, 12V)

3831852-S $30.95

DRM904193 $37.95

GG-FHORING $1.00

CUMMMINS P7100 to Gearhousing O-ring (‘94-‘98, 12V)

CUMMINS Fuel Pump Elbow (‘94-‘98, 12V) Thread to barbed. Installs on the top of the lift pump.

2-417-413-101 $65.95

DORMAN Water-in-Fuel Sensor (‘89-‘96)

3918188 $4.95

NEW! 3925711

$24.95

1467445003 $29.95

BOSCH Fuel Overflow Valve Kit (‘94-‘98, 12V) This kit comes complete with the fuel overflow valve and two sealing washers.

3847102S $211.00

For fuel filter bleed screw and fuel injector return lines.

MOPAR Lift Pump Spacer  (‘94-‘98, 12V) Used when removing fuel heater. (2) 3939258 gaskets required. See page 7.

BOSCH VP44 Fuel Overflow Valve Kit (‘98.5-‘02, 24V) This kit comes complete with the fuel overflow valve and two sealing washers.

FLEETGUARD Water-in-Fuel Sensor Repair Connector (‘00-‘02)

3823256 $12.15

BD LED Low Fuel Pressure Indicator (‘98.5-‘07, 5.9L) Indicator lights up when fuel pressure descreases to 5 psi. Tapped banjo bolt and gaskets included.

BD-1081130 $74.00

Fuel Solenoid Replacement Boot (‘94-‘98) Replace a torn boot on the fuel shutoff solenoid and help prevent damage to it.

SA-4153 $9.95

AFTERMARKET Fuel Shutoff Relay (‘94-‘98) This 70 amp relay activates the fuel solenoid.

SS70A $13.95

AFTERMARKET Fuel Solenoid Saver Diode (‘94-‘98)  Save the fuel solenoid from burning up if the starter sticks on.

SS99 $24.50

AFTERMARKET 65 amp Fusible Link (‘94-‘98)  Protection for the power supply to the fuel shutoff solenoid.

FL90 $13.85

2003-2009 THIRD GENERATION BSH-0445226044

3939570

Fuel Injection Rail (‘07.5-‘12, 6.7L) Fuel injection rails come complete with rail pressure sensor and fuel pressure limiting valve.

$325.00

CUMMINS 4937282 $395.00

NEW! 3916361

Fuel Injection Rail (‘03-‘07, 5.9L) Fuel injection rails come complete with rail pressure sensor and fuel pressure limiting valve.

BOSCH BSH-0445226014 $259.95

CUMMINS 4929618 $420.00

3911446

BD LED Low Fuel Pressure Indicator (‘98.5-‘07, 5.9L) Indicator lights up when fuel pressure descreases to 5 psi. Tapped banjo bolt and gaskets included.

$7.95

FUEL PUMPS & FUEL SYSTEM PARTS/ACCESSORIES

1994-2002 SECOND GENERATION

BOSCH

$6.50

BD-1081130 $74.00

$14.95

FLEETGUARD Fuel Heater Thermostat (‘00-‘07, 5.9L)

3900349S $16.95

3924726

$75.95

3959453S $13.95

Catalog good through April 2020 l Prices subject to change without notice.

Fuel Rail Pressure Relief Valve (‘07.5-‘18, 6.7L)

BOSCH BSA-1110010013 $130.00

CUMMINS 4938005 $285.00

Fuel Rail Pressure Relief Valve (‘03-‘07, 5.9L)

BOSCH BSH-1110010029 $125.00

CUMMINS 3947799 $299.95

Order 770-886-2500 or genosgarage.com 

l 33


FUEL PUMPS & FUEL SYSTEM PARTS/ACCESSORIES

2003-2009 THIRD GENERATION Fuel Rail Pressure Sensor (‘07.5-‘12, 6.7L)

BOSCH BSH-0281006327 $124.95

CUMMINS 5297640 $221.00

Fuel Rail Pressure Sensor (‘03-‘07, 5.9L)

BOSCH BSH-0281006325 $79.95

CUMMINS 5297641 $260.00

MOPAR Rail Pressure Sensor Connector Repair Kit (‘03-‘07, 5.9L)

5143781AB $33.95

Fuel Injection Rail (‘13-‘18, 6.7L) Fuel injection rail comes complete with rail pressure sensor and fuel pressure limiting valve.

BOSCH BSH-0445226126 $325.00

CUMMINS 5295117 $525.00

Fuel Injection Rail (‘07.5-‘12, 6.7L) Fuel injection rail comes complete with rail pressure sensor and fuel pressure limiting valve.

BOSCH BSH-0445226044 $325.00

CUMMINS 4937282 $395.00

Fuel Rail Pressure Sensor (‘13-‘18, 6.7L)

BOSCH BSH-F00RL01029 $225.00

CUMMINS 4306993 $145.00

BOSCH BSH-0281006327 $124.95

CUMMINS 5297640 $221.00

CUMMINS Fuel Injector Harness to Valve Cover Harness (‘06 & ‘20, 5.9L & 6.7L)

5395297 $30.95

CUMMINS Fuel Injector Harness Retaining Clips (‘03-‘05, 5.9L) Sold individually. (6 required per engine.)

3963736 $2.95

Fuel Rail Pressure Sensor (‘07.5-‘12, 6.7L)

CUMMINS Fuel Injection Harness with Plug (‘03-‘05, 5.9L) Attaches to rocker housing. (3) required per engine. Sold individually.

3966805 $62.95

MOPAR Drain Valve/Water in Fuel Sensor Chassis Mounted (‘10-‘18, 6.7L) 2500/3500/4500/5500

68197868 $31.95

RACOR (OEM) Drain Valve/Water in Fuel Sensor Chassis Mounted (‘10-‘18, 6.7L) 2500/3500/4500/5500

PFRK54535RAC $21.95

CUMMINS Fuel Injection Harness Repair Pigtail (‘03-‘05, 5.9L) CUMMINS Fuel Injector Return Check Valve (‘03-‘07, 5.9L) Requires: (1) #3963988 14MM gasket - $3.95 ea. (1) #3963983 12MM gasket - $2.25 ea.

I

2010-2020 FOURTH GENERATION

OEM Fuel Control Actuator Replacement mounting hardware included.

GG-INJHR0305 $64.95

CUMMINS Fuel Injector Harness to Valve Cover Harness (‘06 & ‘20, 5.9L & 6.7L)

3957290 $80.95

BOSCH ‘07.5-‘18, 6.7L 0928400642 $142.00

CUMMINS Water-in-Fuel Sensor (‘07.5-‘19, 6.7L)

CUMMINS ‘03-‘07, 5.9L 4932457 $138.95 3911940S $12.95

MOPAR Fuel Canister Drain (‘10-‘20, 6.7L)

68065611AA $21.95

MOPAR Fuel Filter Cap (‘10-‘20, 6.7L) *Want something a little more robust than this tool made of plastic? See page 29 for the billet aluminum cap.

68065612AA $69.95

Fuel Rail Pressure Relief Valve (‘07.5-‘18, 6.7L) FLEETGUARD Water-in-Fuel Sensor (‘00-‘07, 5.9L) 10mm thread.

FLEETGUARD Water-in-Fuel Sensor (‘04.5-‘07, 5.9L) 14mm thread.

3953517S $11.95

BOSCH Cascade Overflow Valve  (‘03-‘07, 5.9L)

MOPAR Fuel Filter Canister Drain  (‘03-‘07, 5.9L)

5080552AB $27.95

DORMAN Fuel Filter Canister Top and Gasket  (‘00-‘07, 5.9L)

DRM904301 $20.95

Includes: fuel lid seal, fuel drain seal, WIFS seal, fuel heater seal, fuel pump seal (‘03-‘04). Doesn’t include banjo bolt gaskets.

BOSCH BSH-1110010013 $130.00

CUMMINS 4938005 $285.00

3959454S $9.95

F-OON-200-798 $37.63

MOPAR Fuel Canister O-ring Seal Kit  (‘03-‘07, 5.9L)

4918587 $30.45

5093129AA $23.95

I

BOSCH OEM Fuel Control Actuator (‘07.5-‘18, 6.7L) Replacement mounting hardware included.

0928400642 $142.00

CUMMINS Fuel Control Actuator Repair Harness (‘03-‘18, 5.9L & 6.7L)

3164098 $34.95

CUMMINS Water-in-Fuel Sensor (‘07.5-‘20, 6.7L)

3911940S $12.95

MOPAR Water-in-Fuel Sensor  (‘13-‘18, 6.7L) Replacement for chassis-mounted fuel filters.

68197868AA $33.95

RACOR Water-in-Fuel Sensor  (‘13-‘18, 6.7L) Replacement for chassis-mounted fuel filters.

PFRK54553 $24.95

2014-2018 RAM 1500 ECODIESEL MOPAR Fuel Level Sending Unit (‘03-‘04, 5.9L) For Long Bed trucks with 35 gallon fuel tank.

NEW! 5072766AD $92.95

MOPAR Fuel Level Sending Unit (‘03-‘04, 5.9L) For trucks with 34 gallon fuel tank.

5086281AC $83.95

MOPAR Fuel Module Tank Seal (‘90-‘06) Works with OEM fuel modules.

52018808 $10.13

34 l Ram Turbo Diesel Parts & Accessories  #107

MOPAR Fuel Filter Canister (‘14-‘18)

EZ Fuel Filter Canister Drain Valve (‘14-‘18) (M12 - 1.5mm)

68394482AA $153.95

FTV-109 $21.95

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


B8 5100 Series

(For STOCK RIDE HEIGHT.)

(For STOCK RIDE HEIGHT up to 2.25” lift.)

If you’re looking for suspension performance, the B6 4600 Series shock absorber is the best solution to improve your truck’s ride.

BILSTEIN B8 5100 series are designed specifically to help your lifted Dodge Ram truck, supplying the correct tuning and length for your specific lift.

Monotube gas pressure construction • Improved ride and handling Added traction and enhanced stability • Increased performance when hauling or towing.

Monotube gas pressure technology • Easy to install; direct bolt-on; no modification required • Multi-layer zinc finish is the most durable in the industry

‘14-‘18, 2500 4WD w/Air Ride: $81.95 each REAR BIL-24-285650

‘14-‘18, 2500 4WD w/Air Ride: $89.95 each

‘14-‘18, 2500 2WD: $72.95 each

REAR BIL-24-285667

FRONT BIL-24-269421 REAR  BIL-24-269439

‘14-‘19, 2500 4WD  NEW! FRONT (2”-2.5” lift)  BIL-24-268639: $89.95 each ‘13-‘19, 3500 4WD ‘13-‘19, FRONT (2”-2.25” lift) BIL-24-251747: $91.95 each ‘13-‘18, REAR (0-1” lift)  BIL-33-238555: $89.95 each

‘13-‘18, 3500 4WD & 2WD: $84.95 each (Excludes air leveling suspension - rear only.)

FRONT BIL-24-238526 REAR  BIL-24-238533

‘14-‘18, 2500 4WD

(Excludes air leveling suspension - rear only.)

(Excludes air leveling suspension - rear only.)

‘13-‘18, 2500 4WD

FRONT BIL-24-240390: $84.95 each REAR  BIL-24-239462: $84.95 each

‘14-‘18, FRONT (2”-2.25” lift) BIL-24-251754: $91.95 each ‘14-‘18, REAR (0-1” lift)  BIL-24-239455: $89.95 each

‘13, 2500 4WD:  $79.95 each FRONT BIL-24-186070 REAR  BIL-24-186094

One Piece Aluminum Rod Guide & Seal Keeps dirt out and maintains a nearly friction-free surface for longer life.

‘03-‘12, 2500/3500 4WD

FRONT BIL-24-186070: $82.95 each REAR  BIL-24-186094: $79.95 each

‘03-‘12, 2500/3500 2WD:  $79.95 each FRONT  BIL-24-186063 REAR  BIL-24-186087

(Excludes air leveling suspension - rear only.)

Massive Self-Adjusting Digressive Piston Instantly reacts and adjusts for any condition... smooth road, rough road or no road. Provides maximum vehicle body motion control while maintaining superior comfort.

‘94-‘02, 2500/3500 4WD

Massive Self-Adjusting Digressive Piston Instantly reacts and adjusts for any condition...smooth road, rough road or no road. Provides maximum vehicle body motion control while maintaining superior comfort.

FRONT BIL-24-185172: $72.95 each REAR  BIL-24-188036: $76.95 each

‘94-‘02, 2500/3500 2WD:  $72.95 each FRONT  BIL-24-184847 REAR  BIL-24-184854

High Pressure Nitrogen Gas and “Floating” Dividing Piston Eliminates the possibility of oil foaming and performance loss.

‘89-‘93, W250/W350 4WD:  $79.95 each FRONT  BIL-33-248097

High Pressure Nitrogen Gas & “Floating” Dividing Piston Eliminates the possibility of oil foaming and performance loss.

‘89-‘93, W250/W350 4WD:  $79.95 each REAR  BIL-24-248105

‘89-‘93, D250/D350 2WD:  $72.95 each FRONT  BIL-24-185165

‘89-‘93, D250/D350 2WD:  $79.95 each REAR  BIL-24-185158

‘13, FRONT (0-2.5” lift)  BIL-24-185776: $86.95 each ‘13, REAR (0-2” lift)  BIL-24-191203: $86.95 each

‘03-‘12, 2500/3500 4WD

FRONT (0-2.5” lift)  BIL-24-185776: $86.95 each REAR (0-2” lift)  BIL-24-191203: $86.95 each

BILSTEIN SHOCK ABSORBERS

B6 B8 B6 4600 Series

‘94-‘02, 2500/3500 4WD

FRONT (0-2.25” lift)  BIL-24-185776: $86.95 each REAR (0-1” lift)  BIL-24-185783: $86.95 each REAR (0-2” lift)  BIL-24-191203: $86.95 each

‘89-‘93, 2500/3500 4WD

FRONT  BIL-33-185590: $81.95 each REAR  BIL-33-185569: $81.95 each

RAM 1500 EcoDiesel B8 5100 Series (For STOCK RIDE HEIGHT up to 2.75” lift.)

‘09-‘18, 1500 4WD

RIDE HEIGHT ADJUSTABLE  (Excludes air leveling suspension.)

FRONT (0-2.75” lift)  BIL-24-187367: $105.95 each REAR  (0-1” lift)  BIL-24-187374: $84.95 each (For LIFTED RIDE HEIGHT  0” - 2.6” lift.)

“What is the difference between the 4600 Series and 5100 Series shocks?” The answer: other than the color, the 5100 Series shocks are for trucks that have up to a 2.25” lifted suspension and feature stiffer valving. Contrary to folklore, they are not designed for a specific Ram application.

‘19, 1500 4WD  NEW!

RIDE HEIGHT ADJUSTABLE  (Excludes air leveling suspension.)

FRONT (0-2.6” lift)  BIL-24-232203: $132.00 each

B6 4600 Series RAM 1500 EcoDiesel

‘14-‘18, RAM 2500 4X4 POWER HOP KIT

(For STOCK RIDE HEIGHT.)

Monotube gas pressure technology • Easy to install; direct bolt-on; no modification required • Improved control and stability, precise handling, ultimate performance, and incredible comfort • BILSTEIN’s unique piston design offers greater sensitivity and superior vehicle control

GG-PHOPKIT:  $225.00

This kit dampens axle harmonics under power and allows for extra load carrying capacity. Fits 2500 4x4 trucks only. Kit includes: • Bilstein Damper • Axle Mounting Bracket • Mounting Hardware

‘09-‘18, 1500 4WD

(Excludes air leveling suspension.)

FRONT BIL-24-187343: $96.95 each REAR  BIL-24-187350: $73.95 each

‘19, 1500 2WD

H TDR 98, pg. 7

(Excludes air leveling suspension.)

FRONT BIL-24-228831: $102.00 each REAR  BIL-24-228848: $76.00 each

‘09-‘18, 1500 2WD

(Excludes air leveling suspension.)

FRONT BIL-24-187480: $84.95 each REAR  BIL-24-187510: $73.95 each

Catalog good through April 2020 l Prices subject to change without notice.

NOTE: Will not work on Power Wagon. Please make sure you have the 4 mounting holes on the top of the differential.

Order 770-886-2500 or genosgarage.com 

l 35


STEERING, SUSPENSION & BRAKES

Brake ROTORS FRONT BRAKE ROTORS

Brake Pads

Our local Dodge dealer introduced the MOPAR brake pads to us, and we believe they are a great value. If you are happy with the OEM brake pads on your truck, you will be happy with these. FRONT DISC BRAKE PADS ‘09-‘18, 2500/3500 BRAKE-2AMV1148AA:  $65.95

‘97-‘99, 2500 4WD - 7500LB AXLE BRAKE-V1012364AB:  $68.95

‘09-‘18, 1500 BRAKE-2AMV1350AB:  $59.95

‘97-‘99, 2500 4WD - 8800LB AXLE BRAKE-2AMV1279AA:  $66.95

‘08-‘18, 4500/5500 BRAKE-68034093AA:  $146.57

‘94-‘99, 2500 2WD BRAKE-V1012364AB:  $68.95

‘03-‘08, 2500/3500 BRAKE-2AMV1267AA:  $49.95

‘94-‘99, 3500 2WD/4WD BRAKE-2AMV1279AA:  $66.95

‘00-‘02, 2500/3500 BRAKE-2AMV1254AA:  $51.95

‘94-‘96, 2500 4WD - 3500LB AXLE BRAKE-V1012364AB:  $68.95

REAR BRAKE ROTORS

‘09-‘18, 2500/3500/3500CC 2AMV2182AB:  $118.00

‘09-‘18, 2500/3500/3500CC 2AMV2184AB:  $156.00

‘03-‘08, 2500/3500/3500CC ‘06-‘08, 1500 Mega Cab 2AMV1050AA:  $105.00

‘03-‘08, 2500/3500/3500CC ‘06-‘08, 1500 Mega Cab 2AMV0144AA:  $99.00

‘00-‘02, 2500/3500 2AMV5230AA:  $94.00

‘00-‘02, 2500 ‘01-‘02, 3500 2AMV9932AA:  $114.00

Power Brake Bleeder Kits & Accessories

‘94-‘96, 2500 4WD - 4500LB AXLE BRAKE-2AMV1279AA:  $66.95 ‘89-‘93, 2500/3500 BRAKE-V1011777AB:  $66.95

REAR DISC BRAKE PADS ‘09-‘18, 2500/3500 BRAKE-2AMV2158AB:  $79.95

‘09-‘18, 1500 BRAKE-2AMV2563AA:  $65.95

‘01.5-‘08, 2500/3500 BRAKE-2AMV2257AA:  $66.95 LEARN MORE: TYPES OF BRAKE PADS genosgarage.com/downloads/TechPDF/TDR51_BrakePadSpottersGuide.pdf

Brake Bleeder Kit (Rectangular/Oblong Reservoir Cap)

Brake Bleeder Kit (Round 3-tab Twist Reservoir Cap)

Brake Pads

Kit includes: 2qt capacity tank and tubing for bleeder valve.

Kit includes: 2qt capacity tank, metal rectangular adapter plate, machined billet aluminum adapter cap and clamping hardware.

MP-0113:  $67.46

MP-0105:  $67.46

EXTRA ADAPTERS

H TDR43, p14-17

Metal Rectangular Adapter Plate

SUPER-DUTY (‘14-‘18) 2500/3500 FRONT BRAKE-HB633P.790: $119.00 REAR BRAKE-HB634P.750: $119.00

(‘97-‘99) 2500 4WD FRONT (7500lb axle) BRAKE-HB296P.670: $81.00 FRONT (8800lb axle) BRAKE-HB298P.787: $81.00

(‘09-‘13) 2500/3500 FRONT BRAKE-HB633P.790: $119.00 REAR BRAKE-HB634P.750: $119.00

(‘94-‘99) 2500/3500 FRONT (2500 2WD) BRAKE-HB296P.670: $81.00 FRONT (3500 2WD/4WD) BRAKE-HB298P.787: $81.00

(‘03-‘08) 2500/3500 FRONT BRAKE-HB552P.722: $86.00 REAR BRAKE-HB299P.650: $98.00

(‘94-‘96) 2500 4WD FRONT (3500lb axle) BRAKE-HB296P.670: $81.00 FRONT (4500lb axle) BRAKE-HB298P.787: $81.00

Aluminum Adapter

For older style rectangular reservoir. Includes clamping hardware.

Round aluminum adapter for Chrysler Ram trucks.

MP-1105:  $34.16

MP-1113:  $34.16

ACCESSORIES

16oz. Catch Bottle

Kit includes: 16oz. catch bottle with tubing to attach to bleeder valves.

MP-1810:  $12.56

(‘01.5-‘02) 2500/3500 REAR BRAKE-HB299P.650: $98.00 HEAVY-DUTY (‘00-‘02) 2500/3500 FRONT BRAKE-HB487F.733: $83.95

Brake pad compounds are a compromise. If you choose the HAWK Super-Duty pad (suffix “P”) you can expect a higher operating temperature and less fade than stock brake pads. They will also have a higher initial “bite” than the stock pad. The trade-off: moderate dust and moderate noise as compared to the stock pad which is low dust and low noise. Hawk advises that Super-Duty brake pad wear is comparable to the street brake pad. *The HB-487.733F brake pad listed for the ‘00-‘02 trucks is only available in “F” compound which is Hawk’s designation for Street. This compound is much like a stock Mopar pad.

36 l Ram Turbo Diesel Parts & Accessories  #107

DOT 5.1 Hi-Performance Brake Fluid AP_DOT_5.1 (500 ml/17 oz.):  $12.25

DOT 5.1 fluid provides a high boiling point and relatively stable viscosity over a wide range of temperatures. It is also compatible with DOT 3 or 4 fluid and can be mixed without concern. We recommend two bottles to fill your truck’s brake system.

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


3500 DRW TRUCKS ‘12-‘18 SAST-D1215DRW:  $1750.00 ‘10-‘11 SAST-D1011DRW:  $1750.00 ‘09 SAST-D09DRW:  $1750.00 ‘00-‘08 SAST-D0008DRW:  $1750.00

HEAVY-DUTY 4WD Steering Dampers (‘00-‘19)

‘14-‘20, RAM 2500 ‘13-‘20, RAM 3500, Cab & Chassis MOP-68232449AC:  $165.95

2500/3500 SRW TRUCKS ‘12-‘18 SAST-D1215:  $1550.00 ‘10-‘11 SAST-D1011:  $1550.00 ‘09 SAST-D09:  $1550.00 ‘00-‘08 SAST-D0008:  $1550.00 ‘94-‘99 SAST-D9499:  $1550.00 (no ABS)

SINGLE REAR WHEEL HUB KIT

‘13, RAM 2500 ‘08-‘12, RAM 2500/3500, Cab & Chassis MOP-5154661AC:  $115.95

‘98-‘99, RAM 2500/3500, 4WD Eyelet to eyelet.

MOP-52039280:  $55.95  NEW!

‘98-‘99, RAM 2500/3500, 2WD Eyelet to tapered stud.

MOP-52039282:  $57.95  NEW!

NOTE: ‘13-‘18 2500/3500 SRW truck (Bighorn or Longhorn) hub conversion will not work on trucks with OEM aluminum wheels with small Ram center cap without modifying the wheels. They need a minimum clearance of 4.224”.

With greater frequency we have listened as customers have asked for manual locking front hubs. In recent Turbo Diesel Register magazines there have been articles on these products (Issue 82 and Issue 62) that discussed the pros and cons of this accessory, the primary benefit being reduced wear on the front drivetrain: the axle shafts and corresponding differential gearing are disengaged. Other benefits: fuel economy thanks to the elimination of 150-pounds of rotating mass, universal joint wear is all but eliminated and a user-serviceable set of wheel bearings.

‘03-‘07, RAM 2500/3500, Cab & Chassis MOP-52106909AE:  $79.95 ‘00-‘02, RAM 2500/3500 MOP-52106909AC:  $69.95 NOTE: If the Mopar steering upgrade has been performed, you’ll need the ‘08-‘13 steering damper.

‘94-‘97, RAM 2500/3500, 4WD Eyelet to tapered stud.

MOP-68087192AA:  $55.95  NEW! STEERING DAMPER NUT

Required for steering damper #68087192AA

06506276AA:  $3.95

STEERING, SUSPENSION & BRAKES

DUAL REAR WHEEL HUB KIT

Front Manual Locking Hub Conversions

We’re thrilled to offer you the SpynTec designed front manual hubs.

Front Axle Universal Joints

SPICER ‘10-‘18, Ram 2500/3500 SAST-UJ68065428AC:  $110.95

SPICER ‘03-‘09, Ram 2500/3500 SAST-UJ5006813:  $62.00

SPICER ‘94-‘02, Ram 2500/3500 SAST-UJSPL55-3X:  $55.90

Steering Dampers Help dampen steering vibrations and restore the steering control of your ‘03-‘18 Dodge Ram truck.

DORMAN Brake Dust Shield - Front (‘03-‘08 2500/3500 4WD) Sold as a pair.

DRM924228 $40.95

DORMAN Brake Dust Shield - Rear (‘01-‘08 2500/3500 4WD with Disc Brakes) Sold as a pair.

DRM924226 $79.95

DORMAN ABS Brake Sensor - Front (‘06-‘08)

DRM970052 $39.95

DORMAN ABS Brake Sensor - Front (‘03-‘05)

DRM970088 $40.95

DORMAN ABS Brake Sensor - Front (‘00-‘02)

DRM695882 $41.95

DORMAN ABS Brake Sensor - Rear (‘98-‘05)

DRM970024 $19.95

DORMAN ABS Brake Sensor - Rear (‘89-‘97)

DRM970012 $12.95

Catalog good through April 2020 l Prices subject to change without notice.

B8 5100 DUAL STEERING DAMPER KIT RAM 2500 (‘14-‘19, 2500 4WD)  RAM 3500 (‘13-‘18, 3500 4WD) BIL-53-264817:  $205.95

RAM 2500 (‘13, 4WD) RAM 2500/3500, Cab & Chassis (‘08-‘12, 4WD) BIL-33-170794:  $80.95

RAM 2500/3500, Cab & Chassis (‘03-‘07, 4WD) BIL-24-164870:  $89.95 NOTE: If the Mopar steering upgrade has been performed, you will need the ‘08-‘13 steering damper.

Order 770-886-2500 or genosgarage.com 

l 37


STEERING, SUSPENSION & BRAKES

 Steering Box Stabilizer (‘94-‘18) ‘09-‘18, 4WD 2500/3500 PPM-8559-04:  $170.00

‘03-‘08, 4WD 2500/3500 PPM-8558-04:  $170.00

‘94-‘02, 4WD 2500/3500 PPM-8557-04:  $170.00

Ties frame horns together to help eliminate steering box “wander.” Bolt-in installation.

POWER STEERING line & FITTINGS

Adjustable Track Bar Kit (‘03-‘12)

Power steering pressure and return line assemblies meet or exceed the OE assembly in fit, form, quality, and function.

4WD 2500/3500  PPM-8550-01:  $300.00 • Bent to clear most aftermarket differential covers • Made from high quality 1-3/8” 1045 solid tubing • Allows centering of front axle when running a suspension lift • FK Bearing heavy duty heat treated 7/8” chromoly rod end at axle end • Synergy Suspension double adjuster sleeve & pinch bolt assembly allows for adjustment of track bar length without removing control arm mounting bolt • 100% bolt-on components assures a trouble free installation with the use of basic hand tools

HEAVY DUTY T-STYLE STEERING KITS (‘94-‘18)

‘13-‘18, 4WD  PPM-8725-01:  $835.00 ‘03-‘12, 4WD  PPM-8525-01:  $750.00

‘00-‘02, 4WD  PPM-8525-02:  $785.00 ‘94-‘99, 4WD  PPM-8525-03:  $810.00

‘97-‘02, 2500/3500

‘94-‘02, 2500/3500

Pressure Line Assembly - Pump to Hydroboost

GATES-352440: $23.95

Pressure Line Assembly - Hydroboost to Gear

GATES-352340: $28.95

Power Steering End Fitting, Return

GATES-350230: $7.25

Return Line Assembly, Gear to Pump

GATES-363990: $17.95 Cut to fit.

‘94-‘96 Pressure Line Assembly

GATES-362910: $14.95

‘94-‘02 11/32” Power Steering Return Line Hose

GATES-349960: $2.95 Sold per foot.

‘94-‘96 Return Line (Order 2ft.) ‘97-‘02 Return Line - Gear to Pump (Order 2ft.) ‘97-‘02 Return Line - Hydroboost to Pump (Order 2ft.)

Help eliminate the “tie rod flop” and tighten up the steering in your ‘94-’18 4WD Dodge Ram truck with this Synergy Heavy-Duty Steering Kit. This Heavy Duty steering kit is a larger and stronger, bolt-on replacement for the stock steering. No drilling or reaming of the knuckles is required. It uses the updated factory T-style steering design to eliminate toe-change caused by Y-style steering.

OEM Power Steering Pump & PULLEY (‘03-‘10) ‘10, 3500 & ‘03-‘09 2500/3500 68034326AB:  $669.00 CORE CHARGE: $50.00

This Mopar OEM power steering pump is a direct fit and reuses the factory reservoir in your truck.

Cutaway shows design of trackbar end.

Direct bolt-on. No conversion brackets to install.

NOTE: Pulley installation tool needed for pulley installation.

DIRECT REPLACEMENT TRACKBAR (‘94-‘02) RP28444G2:  $225.00

Rare Parts Inc manufactures this direct replacement, adjustable heavy duty track bar for Dodge Ram trucks. Pregreased with synthetic lubricant.

Power Steering Hose Kits

Best Seller!

STEERING LINKAGE UPGRADE KIT, T-STYLE (‘03-‘12)

1997-2002 Hydro-Boost Brakes BORG-925117:  $99.75

RAM 2500/3500 LINKAGE  52122362AL:  $450.00 Three #6505623AA linkage kit nuts included with this kit. NOTE: If replacing the steering linkage or drag link inner tie rod assembly at the pitman arm on a vehicle built before February 14, 2008, verify that the pitman arm part# is 68039930AA. If not, it must be replaced with our part PA81029PR, page 39. NOTE: Steering damper sold separately. ‘03-‘07 model trucks will need the ‘08-‘12 steering damper.

38 l Ram Turbo Diesel Parts & Accessories  #107

1994-1996 Vacuum Brakes BORG-925116:  $61.75

An OEM-style rubber hose kit for ‘94-‘02 Dodge ram trucks. If you are installing a new power steering pump, it is a good idea to replace the power steering hoses to avoid contamination of the new pump. Kits include pressure and return hoses and all clamps.

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


‘03-‘08 (6 BOLT) BORG-800123:  $625.00

NOTE: Does not work with aftermarket steering box braces.

NOTE: A Borgeson Steering Shaft (BORG-000950 or BORG-000945) is recommended for the installation of this steering box.

Borgeson has sourced and adapted a brand new Delphi 684 series power steering box for the ‘03-‘08 Ram trucks. The Borgeson/Delphi 684 series “Dodge Box” offers the largest piston diameter for the most available power assist and a modern variable valve for stable highway driving. Fits all OEM and dropped pitman arms. Uses OEM pitman arm.

1-year manufacturer warranty.

NEW! NOT REBUILT!

REMAN Steering Box (‘94-‘02 4WD) BORG-800112A:  $429.00

The 800112 steering box offered for ‘94-‘02 trucks is a reman unit. Your truck’s original steering box was engineered in the 1960s, called a Series 700, and was made by Delphi. The replacement unit is also made by Delphi, but it was designed in the 2000s and it is called a Series 680. So what makes the Delphi Series 680 a better mousetrap? •

 odern internal valving provides a variable assist feel to the driver’s steering M input. The further you turn the wheel the greater the assist. The benefits to you: the power assist is limited in the centered position to help the vehicle track straight on the highway.

T he Borgeson replacement steering box is a 13:1 ratio. The old box was a 16:1. The benefit to you: effectively 3.5 turns from lock-to-lock compared to 4.5 turns.

Larger internal piston diameter (80mm) for greater power assist.

Larger diameter bearings support the output/Pittman shaft.

If you use a Borgeson Replacement Steering Shaft (part numbers 000950 or 000945), the steering box installation is a simple bolt-inplace operation. The Borgeson box and shaft are a full-circle spline design. To use the steering box with your truck’s existing steering shaft (a female, D-shaped spline design), the Borgeson input shaft adapter (male, O-shaped) will have to be cut-down with a grinding wheel.

“Call Scott with Questions” or see our website for more information about this PSC steering box.

“BIG BORE xd” Steering Box (‘94-‘02, 4WD)

NEW! NOT REBUILT!

‘94-‘99 with “Y” style linkage PSC-SG852K1: $695.00 ‘98-‘02 with “T” style linkage PSC-SG852K3: $695.00

1-year manufacturer warranty.

NOTE: Does not work with aftermarket steering box braces.

The second generation Dodge 2500/3500 4WD truck steering gears have always had failures to the lower sector shaft bearing and seals due to the single bearing design. PSC now offers a brand new extreme duty gear box replacement that offers a 45MM bearing and sector shaft to eliminate any side to side flex. The PSC Dodge XD steering gear features a 13:1 ratio for easier parking and less turns lock to lock along with a modern variable valve for stable highway driving and effortless maneuvering. NOTE: Due to the increased overall size of the BIG BORE XD steering box, spacers are included in the kit to space the gear box off the frame. There is a 1” difference from the OEM steering gear. We suggest trimming the draglink and tie-rod at the pitman arm 1/2” to clear for alignment.

‘95-‘02

‘79-‘93 w/U-joints

High-Flow Power Steering Pump (‘94-‘02)

‘79-‘93 w/Rag Joint Flange

BORG-800328:  $185.25

NEW! NOT REBUILT!

Second Generation truck owners take note: Are you looking for a power steering pump that gives better performance than the OEM unit at a lower price? The Borgeson power steering pump is a direct replacement for ‘94-‘02 Dodge Turbo Diesel 2500 and 3500 trucks. Pump output pressure/flow is increased from 1,450 psi to 1,550 psi and from 3.5 gpm to 4.5 gpm.

When replacing the power steering pump, steering box or hoses, it is mandatory to flush the power steering system and to bleed the system. Failure to do so will result in damage to these parts and void the manufacturer warranty. Instructions on how to bleed the power steering system are included.

STEERING PITMAN ARM, (‘03-‘08, 2500/3500)

PA810293R:  $29.95

Direct replacement part for a worn or bent center link. Eliminates loose steering and alignment issues related to a worn pitman arm.

STEERING, SUSPENSION & BRAKES

NEW Steering Box (‘03-‘08, 4WD)

Steering Shafts

Depending on usage, the Dodge steering coupler can show signs of wear in as little as 50,000 miles. This wear, which causes play in the truck’s steering, is even more noticeable if your truck is used for plowing, towing or if oversized tires have been installed. Replacing the worn steering shaft with another OEM shaft only gives you a temporary fix. Borgeson has replacement steering shaft assemblies with precision needle bearing u-joints available for ‘79-‘08 Dodge trucks. APPLICATION Replacement Steering Shaft  (‘03-‘08) 2WD

BORG-000952: $305.00

Replacement Steering Shaft  (‘03-‘08) 4WD

BORG-000951: $270.00

Replacement Steering Shaft  (‘95-‘02)

BORG-000950: $270.00

Replacement Steering Shaft  (‘94)

BORG-000945: $270.00

Replacement Steering Shaft  (‘79-‘93)

Steering column must have removable rag joint. Full-Size Dodge with 2 U-Joints

Replacement Steering Shaft  (‘79-‘93)

Full-Size Dodge with Rag Joint Flange

BORG-000943: $236.00 BORG-000940: $189.00

Replacement Rubber Rag Joint Disk  (‘79-‘93) BORG-000941: $16.62

Catalog good through April 2020 l Prices subject to change without notice.

Order 770-886-2500 or genosgarage.com 

l 39


STEERING, SUSPENSION & BRAKES

HOW TO CORRECT YOUR TRUCK’S STEERING WOES

Download the ‘TDR Buyer’s Guide’ in the Technical Information section of our website for more details. Sway Bar END Links FRONT - STANDARD HEIGHT TRUCKS ‘13-‘18, 3500 4WD & ‘14-‘18, 2500: SMX-1315: $116.23 9/16” stud. 5.5” center to center.

FRONT

‘06-‘18, 1500 4WD (non-Mega Cab): SMX-1300: $125.55

Front Sway Bar End Links (‘00-‘09 2500/3500)

Sway Bar End Links sold as a pair.

BD-1032050: $149.00

Due to the heavy demands put on the ‘00-‘09 Dodge Ram 4WD 2500/3500 pick-ups, the front sway bar end links are prone to wearing or even breaking when the truck is lifted due to the stress of the axle dropping. BD’s Sway Bar End Links have a Dual Pivot Design that allows for greater amount of articulation and less stress. Long life urethane bushing design allows for greater flex without breaking and won’t seize due to the elements.

‘13-‘18, 4WD

7.5” center to center.

‘03-‘12, 2500/3500 2WD w/IFS: SMX-1229: $125.55 7.5” center to center.

‘11-‘12, 2500/3500 4WD & ‘13, 2500: SMX-1311: $85.05 9/16” stud. 4.5” center to center.

‘06-‘10, 4WD including 1500 Mega Cab: SMX-1227: $85.05 9/16” stud. 4.5” center to center.

‘03-‘05, 4WD: SMX-1226: $80.55

10mm stud with taper. 4.5” center to center.

‘00-‘02, 4WD: SMX-1225: $85.05

12mm stud with taper. 4.5” center to center. FRONT

‘98-‘99, 4WD: SMX-122445: $89.55

‘03-‘05, 4WD

12mm stud with taper. 4.5” center to center.

NOTE: Designed for use on trucks with stock or up to a 3” lift.

‘95 (April)-‘97, 4WD: SMX-1224: $85.05

12mm stud with taper. 3.5” center to center.

‘94-‘95 (March) 4WD: SMX-1222: $85.05 12mm short stud. 3.5” center to center.

4 WHEEL-DRIVE 2 WHEEL-DRIVE

FRONT - TRUCKS WITH LIFT KITS (up to 3” lift) ‘13-‘18, 3500 4WD & ‘14-‘18, 2500 4WD: SMX-1315L: $116.57 9/16” stud. 6” center to center.

‘06-‘18, 1500 4WD (non-Mega Cab): SMX-1300L: $134.55 8.5” center to center.

‘11-‘12, 2500/3500 4WD & ‘13, 2500: SMX-1311L: $89.55 9/16” stud. 6.5” center to center.

‘06-‘10, 4WD including 1500 Mega Cab: SMX-1227L: $85.05

Steering Box Stabilizer

9/16” stud. 5.5” center to center.

‘03-‘05, 4WD: SMX-1226L: $85.05

‘03-‘18, 2500/3500 4WD BD-1032003:  $205.00 ‘94-‘02, 2WD BD-1032002:  $205.00 ‘94-‘02, 4WD BD-1032004:  $205.00

10mm stud with taper. 5.5” center to center.

‘00-‘02, 4WD: SMX-1225L: $80.55

BD’s Steering Box Stabilizer (SBS) eliminates steering wander and wobble caused by excessive shaft play in the steering box of latemodel Dodge trucks. Designed for easy, bolt-in installation (about one hour). The SBS virtually eliminates frame flex at the steering box mounting point, resulting in more positive steering feel. The BD SBS is black powder coated for corrosion resistance and features a greasable, high-quality bearing for reliable operation.

12mm stud with taper. 5.5” center to center.

‘98-‘99, 4WD: SMX-122455: $89.55

FRONT ‘00-02, 4WD

12mm stud with taper. 5.5” center to center.

‘95 (April)-‘97, 4WD: SMX-1224i: $85.05

12mm short stud with taper. 3.0” center to center.

‘94-‘95 (March) 4WD: SMX-1222i: $85.05 12mm short stud. 3.0” center to center.

REAR - STANDARD HEIGHT TRUCKS ‘07-‘12, 2WD & 4WD 4500: SMX-7382: $152.55 ‘94-‘02, 4WD w/Factory Sway Bar: SMX-7371: $134.96

Adjustable Track Bar Kits (‘94-‘12) ‘03-‘12, 4WD BD-1032013: $325.00

‘94-‘02, 4WD BD-1032011: $495.00

With the OEM ball joint design on ‘94-‘12 trucks, frequent maintenance is required to prevent side-to-side movement of the front axle which can cause wear, hammering, wandering and the dreaded “Death Wobble.” BD’s Track Bar is a good solution for steering stability and is a great complement to BD’s Steering Box Stabilizer. Plus, it is adjustable to accomodate up to 3”-4” lifts.

REPLACEMENT BUSHINGS, (‘94-‘12, 2500/3500) BD-1302033:  $37.00

Replacement poly bushings for BD Adjustable Track Bar Kits 1032013 and 1032011. ‘07-‘12 truck will require use of one or both steel sleeves included in this bushing kit.

40 l Ram Turbo Diesel Parts & Accessories  #107

These sway bar links are self aligning and constantly preloaded, maintenance free, and impervious to salt and debris. MAXX Links replace the wear-prone stabilizer link completely. The sway bar end link kit contains: • Two link pin axle studs manufactured from heat treated 4140 alloy steel • Four high-performance urethane bushings • Two vertical bolts sleeves • Sway bar end link bushings • All fasteners

REAR ‘07-‘12, 2WD & 4WD

Control Arm Bump Stop, 2WD (‘03-‘13, 2500/3500) 52113300AB:  $33.95

Eliminate suspension “crash” by replacing worn out bump stops with a set of OEM bump stops. Sold individually.

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


‘03-‘09, 2500/3500 ES_53142G:  $139.61 (To check proper fit, see website for dimensions.)

‘99-‘02, 2500/3500* ES_53131G:  $120.29 ‘99-‘02, 2500/3500* ‘94-‘99, 2500/3500 ES_53120G:  $118.36 *NOTE: ‘99-‘02 model trucks can use either 5.3131G or 5.3120G kits. It depends on the diameter of the bottom mounting bolt. If the bottom mounting bolt is 9/16” you will need 5.3120G. If the bolt is 5/8” you will need the 5.3131G kit.

REAR Leaf Spring Bushing SetS ‘03-‘09, 2500/3500 4WD

NOTE: Does not include frame shackle bushings.

ES_52118G:  $121.24

‘13-‘19, Ram 3500, ‘14-‘19, Ram 2500 ‘09-‘19, Ram 1500 BD-1030705:  $148.00

‘94-‘01, Ram 2500/3500 BD-1030703:  $148.00

This kit is designed to allow the truck owner to manually disable the front wheel drive mechanism by holding the hubs free (2WD) mode with the transfer case in 4WD-Low range. With this BD kit installed, the front wheels will NOT be driven through the transfer case.

3” wide rear spring with 1-11/16” ID main eye.

‘94-‘02, 2500 2WD ‘94-‘98, 2500 4WD ‘94-‘02, 3500 2WD ‘94-‘98, 3500 4WD

Luke’s Link Replacement Trackbar Bushings

ES_52119G:  $85.43 2.5” wide rear spring with 2.5” ID main eye.

2.5” wide rear spring with 1.75” ID main eye.

‘94-‘02, 2500/3500 2WD & 4WD ‘94-‘01, 1500 2WD & 4WD

‘94-‘02, 2500/3500 2WD & 4WD ‘94-‘01, 1500 2WD & 4WD

ES_52109G:  $74.06

ES_52111G:  $64.03

‘03-‘07 - RED BUSHINGS

LUKESLINK_BUSHINGKIT2:  $42.00/pair NOTE: Fits 2007 trucks built prior to 3/18/2007.

‘03-‘07

Sway Bar Frame Bushings

‘94-‘12 (34MM)  ES_55159G: $23.90** ‘94-‘12 (33MM)  ES_95186G: $27.47 * ‘94-‘12 (32MM)  ES_55126G: $27.38 ‘94-‘12 (30MM)  ES_55127G: $27.38

STEERING, SUSPENSION & BRAKES

2-Low Transfer Case Kit Front End Control Arm Bushing Set, 4WD

Factory hardware is reused to install the bushings.

‘94-‘02 - BLACK BUSHING

LUKESLINK_BUSHING_IND:  $18.00 ‘94-‘02

(Only 1 bushing required.)

One of the weakest points on the ‘94-‘07 Ram 4WD truck suspension is the trackbar and tie rod ends. Install these polyurethane bushings to tighten up the bar-to-frame connection.

NOTE: M  easure sway bar diameter before ordering. Bushings not available for all sizes. **NOTE: R  eplacement metal brackets and washers not included with 34mm kit. You must re-use OEM brackets and washers. *NOTE: E nd link bushings not included with 33mm kit. Sold separately.

REPLACEMENT TRACKBAR BUSHING (‘08-‘12)

Sway Bar End Link Bushing

RP22442:  $17.95 each

‘94-‘18, 2500/3500 ES_8084G:  $1.50

Fits like OEM. 2 required. Sold individually.

Sold individually.

Cab Mount Bushing Set

‘03-‘05, 2WD & 4WD Regular Cab ES_54116G:  $248.31 ‘03-‘05, 2WD & 4WD Quad Cab ES_54115G:  $329.85 ‘94-‘02, 2WD & 4WD Regular Cab ES_54107G:  $121.24 ‘94-‘02, 2WD & 4WD Quad or Extended Cab ES_54109G:  $158.79

Motor Mount REINFORCEMENTS ‘98.5-‘02, 24V ES_51116G:  $49.95 ‘94-‘98, 12V ES_51114G:  $58.91 Motor mount inserts sold in Black only. NOTE: These are not replacement bushings, just reinforcements.

REAR

Luke’s Link Trackbar & Tie-Rod End Rebuild Kit (‘94-‘02, 4WD only) FRONT Axle Bump Stops, 4WD

‘03-‘09, 2500/3500 (FRONT) ES_59105G: $33.31 ‘03-‘09, 2500/3500 (REAR) ES_59104G: $86.60

INDIVIDUAL LUKESLINK_TBRKIT:  $72.00 SET OF 4 LUKESLINK_TBRKIT:  $249.95

Use Luke’s Link’s heavy-duty kit to rebuild ‘94-‘02 trackbars and tie-rod ends to better than new. The installation of this kit should last the life of the truck. It is greaseable and adjustable if it ever comes loose. Luke’s Link will also rebuild any of the four tie-rod ends. NOTE: Does not work on trucks with MOOG track bars. Will not fit over 2-1/16” diameter bar.

Catalog good through April 2020 l Prices subject to change without notice.

Order 770-886-2500 or genosgarage.com 

l 41


GAUGES, GAUGE MOUNTS & ACCESSORIES

We carry ISSPRO Performax gauges. See our website for a complete list of applications.

DESCRIPTION

EV2 GAUGES R30000 SERIES BLACK/WHITE FACE

EV2 GAUGES WHITE FACE

EV2 GAUGES BLACK FACE

BLACK FACE

BLACK FACE

WHITE FACE

WHITE FACE

Colored Lettering White Illumination Red Indicator

White Lettering White Illumination Red Indicator

Black Lettering Green Illumination Red Indicator

Blue Lettering Blue Illumination Lt. Blue Indicator

White Lettering Blue Illumination Red Indicator

Black Lettering Green Illumination Red Indicator

White Lettering Green Illumination Red Indicator

2” Boost Pressure • 0-100 psi

ISS-R30433

*ISS-R14433

*ISS-R17433

**ISS-R5643R

2” Boost Pressure • 0-60 psi

ISS-R30233

*ISS-R14233

*ISS-R17233

**ISS-R5623R

**ISS-R6823R

**ISS-R6723

2” Boost Pressure • 0-40 psi

ISS-R30333

*ISS-R14333

*ISS-R17333

**ISS-R5653R

**ISS-R6853R

**ISS-R6753

ISS-R14113

ISS-R17113

**ISS-R5613R

**ISS-R6813R

**ISS-R6713

2” EVA Mechanical Fuel Pressure • 30 psi

ISS-R5604R

ISS-R6804R

ISS-R6704

2” EVA Mechanical Fuel Pressure • 60 psi

ISS-R5607R

ISS-3807GR

ISS-R3707G

I

$145.00

(*1/8 NPT sending unit / **10 Foot Tubing)

$145.00

(*1/8 NPT sending unit / **10 Foot Tubing)

$145.00

(*1/8 NPT sending unit / **10 Foot Tubing) 2” Mechanical Boost Pressure • 0-30 psi

$138.00 $138.00 $138.00 $92.95

(**10 Foot Tubing)

$138.00 $138.00

ISS-R14055

ISS-R17055

2” Electric Fuel Pressure • 0-30 psi *

ISS-R30033

ISS-R14033

ISS-R17033

$156.00

(1/8 NPT sending unit; Wiring harness)

$145.00

ISS-R30288

(‘03-‘07, 5.9L only.)

Electric Fuel Rail Pressure • 0-30,000 psi*

(Wiring harness)

$138.00 $138.00

ISS-R14288

(‘07.5-‘18, 6.7L only.)

(‘07.5-‘18, 6.7L only.)

ISS-R14211

ISS-R17211

$195.00

Oil Pressure • 0-100 psi

$195.00

$138.00

(1/8 NPT sending unit; Wiring harness)

$195.00

$138.00

$148.00

$154.00

$148.00

$148.00

2” Exhaust Gas Temperature • 100°-1500°

ISS-R3607GR

H TDR74, p8-10

(1/8 NPT, Adj. Short, High Temp. K-Series Probe)

2” Exhaust Gas Temperature • 0°-1600°

$189.00

ISS-R14022

ISS-R17022

PRE or POST turbo

PRE or POST turbo

PRE or POST turbo

$189.00

*ISS-R14021

*ISS-R17021

*0-1500° ISS-R3607TR

$172.00

2” Exhaust Gas Temperature • 0°-1600°

(1/8 NPT, Adj. Short, High Temp. K-Series Probe)

$171.00

$171.00

*Gauge face color-coded for Pre-Turbo install (R3607)

$171.00

$171.00

2” Tachometer • 4,000 RPM

$189.00

$189.00

*0-1500° ISS-R3607VWR

ISS-R30022

(1/8 NPT, Adj. Short, High Temp. K-Series Probe)

$189.00

ISS-R5503

(Magnetic Sensor required. See ISS-R8912 below.) *Note: This gauge has a White indicator.

$168.00

Connects factory wiring harness to ISSPRO gauge wiring harness for the 2” tachometer (ISS-R5503). ISS-R8912-92: $36.95

2” Tachometer • 3,000 RPM

ISS-R5501

(Magnetic Sensor required. See ISS-R8912 below.) *Note: This gauge has a White indicator. Magnetic Sensor

$65.00

ISS-R17289

(Includes isolator and 8’ tubing kit)

Tach to OEM Wiring Harness (‘92-‘93) (Built after 6/1/92)

$65.00

$69.00

(‘03-‘07, 5.9L only.)

(Includes isolator and 8’ tubing kit)

*Gauge face color-coded for Post-Turbo install (R3607)

$69.00

$69.00

ISS-R17288

ISS-R30289C

(‘13-‘18, 6.7L only.)

$69.00

$138.00

(‘03-‘07, 5.9L only.)

ISS-R14289

$65.00

$69.00

$138.00

ISS-R30289

(‘07.5-‘12, 6.7L only.)

$69.00

$92.95

ISS-R30055

(1/8 NPT sending unit; Wiring harness)

$69.00

$138.00

2” Electric Fuel Pressure • 0-40 psi *

**ISS-R6743

$69.00

$197.00

Required magnetic sensor for the Tachometer Gauge Installation Kit for Tachometer Gauge (ISS-R5501).  ISS-R8912: $54.95

2” Transmission Temperature 140°-320° • Full-Sweep (Includes 1/8 NPT sending unit)

ISS-R14566

ISS-R17566

ISS-R5656R

ISS-R14599

ISS-R17599

ISS-R5659R

$106.00

2” Transmission Temperature 100°-280° • Full-Sweep (Includes 1/8 NPT sending unit)

ISS-R30599 $106.00

$106.00

$106.00 $106.00

EV2 Lighting Dimmer ISS-R72022: $24.95

Optional Wiring Harnesses

ISS-R6756

$119.00

$130.00

$119.00

ISS-R6859R

$119.00

ISS-R6759

$138.00

ISSPRO Wiring Harness  3.5 foot harness fits between amplifier box and gauge in EV pyrometers and transmission temperature.  ISS-R7799: $11.95

Attribute Programmer for EV2 & Performax

Programmer is used to activate a pre-installed warning light on EV2 gauges, and to adjust the point at which the light illuminates. Please see our website for details or call our Tech Line.  ISS-R82003: $31.95

Chrome EV Gauge Bezel Cover

2-1/16” Chrome bezel for ISSPRO EV gauges. Will NOT work on EV 2 gauges.  ISS-R7754: $6.95

*These gauges may require additional hardware depending on application. See pages 31 & 44-45 for hardware.

42 l Ram Turbo Diesel Parts & Accessories  #107

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


DESCRIPTION

Factory-Match Factory Match (‘10-up) (‘03-‘09)

Phantom II Series

Phantom Series

Ultra-Lite II Series

Z Series

2” Boost Gauge • 100 psi (1/8 NPT)

AM-8509 $89.95

AM-8506 $89.95

2” Boost Gauge • 60 psi (1/8 NPT)

AM-8508 $89.95

AM-8505 $89.95

AM-7505 $89.95

AM-5705 $76.95

AM-4905 $89.95

AM-4305 $78.95

AM-2617 $68.95

2” Boost Gauge • 35 psi (1/8 NPT)

AM-8507 $89.95

AM-8504 $89.95

AM-7504 $89.95

AM-5704 $76.95

AM-4904 $89.95

AM-4304 $78.95

AM-2616 $66.95

2” Electric Fuel Pressure Gauge • 30 psi*

AM-8561 $249.95

AM-8560 $249.95

AM-4360 $257.95

AM-2660 $211.95

(includes fittings, tubing and light kit) (includes fittings, tubing and light kit) (includes fittings, tubing and light kit)

(electric, full sweep, stepper motor movement, includes 1/8 NPT sending unit)

#4 Braided Stainless Steel Line Kit

AM-5706 $76.95

Ultra-Lite Series AM-4306 $78.95

AM-5760 $256.95

*If you are installing an AutoMeter electric fuel pressure gauge in your Ram Cummins truck, you MUST install this braided stainless steel line kit and #3279 fuel pressure snubber to prevent premature failure of the sending unit. Failure to do so will void the gauge warranty.  AM-3227: $56.95

2” Exhaust Gas Temperature Gauge • 0°-1600°

AM-8546 $224.95

AM-8544 $224.95

AM-7544 $226.95

2” Trans Temp Gauge • 100°-260° (Full Sweep)

AM-8558 $184.95

AM-8557 $184.95

AM-7557 $184.95

2” Trans Temp Gauge • 100°-250°H(Short TDR74, Sweep) p8-10

AM-8550 $89.95

AM-8549 $89.95

AM-7549 $89.95

AM-5757 $68.95

AM-7527 $109.95

AM-5727 $89.95

(includes Street Series Probe, wiring and light kit) (includes 1/8 NPT temp sender) (includes 1/8 NPT temp sender)

2” Oil Pressure Gauge • 0-100 psi

(1/8 NPT sender and 1/4 NPT fittings/adapters)

2” Mechanical Fuel Pressure Gauge • 0-35 psi * (includes isolator and tubing kit)

Available only at Geno’s Garage

2” Fuel Rail Pressure Gauge • 0-30,000 psi

AM-8587 $216.95

AM-8586 $224.95

2” Fuel Rail Pressure Gauge • 0-30,000 psi

AM-8594 $224.95

AM-8593 $224.95

(‘03-‘07, 5.9L trucks) (‘07.5+, 6.7L trucks)

LED Lighting Dimmer

AM-7586 $219.95

AM-5744 $208.95

AM-4944 $224.95

AM-4344 $206.95

AM-2654 $191.95

AM-4949 $89.95

AM-4357 $72.95

AM-2640 $59.95

AM-4927 $109.95

AM-4327 $84.95

AM-2634 $79.95

AM-5707900 $149.95

AM-4307900 $149.00

AM-2607900 $149.00

AM-5786 $184.95

AM-4386 $188.95

AM-2686 $169.95

AM-4957 $179.95

AM-5793 $184.95

AM-2693 $174.95

Designed to allow isolated dimming for all AutoMeter gauges with LED lighting separate from OEM dash.  AM-9114: $41.95

*The fuel pressure gauges may require additional hardware depending on application. See pages 31 & 44-45 for hardware.

Back-up Camera for CTS/CTS2 EDGE-98202: $179.95

The CTS2 line of products have a built-in video port that allows users to connect the Edge backup camera. The CTS2’s high-resolution, 4.3 inch color screen allows users to see what’s going on behind them with the Edge camera connected. Features: License plate mount • Adjustable Camera Angle • Parking Guide Lines • Night Vision LEDs • Waterproof Quick and Easy Installation to connect to any Attitude CTS, Evolution CTS2 or Insight CTS2 • Extended RCA, Power and Ground Cables to make installation easier **CTS2 monitor not included with purchase of camera.

Insight CTS2 & CS2 ‘96-‘19, 2500/3500 EDGE CTS2 ‘14-‘16, ECODIESEL EDGE CTS2 EDGE-84130: $434.95

The “Insight” Color Touch Screen 2 (CTS2) has a high-resolution, 5-inch screen to monitor the performance of your ‘96-‘18 OBD-II equipped truck. ‘96-‘19, 2500/3500 EDGE CS2 ‘14-‘16, ECODIESEL EDGE CS2 EDGE-84030: $305.95

See our website for information about data and accessories.

For more information about the operation of the Insight CTS2 and CS2 along with a complete listing of vehicle parameters, visit the EDGE Products website at: www.edgeproducts.com

‘06-‘09 EDGE-38505: $54.95 ‘03-‘05 EDGE-38504: $54.95 ‘98.5-‘02 EDGE-38503: $54.95

Adapter kit included. NOTE: The pod is molded in a charcoal/agate color. If necessary, it can be painted to match the dash in your truck.

NOTE: Limited data available on ‘96-‘07, 5.9L trucks.

The “Insight” CS2 has all of the same capabilities as the CTS2, but has a smaller 2.4-inch screen high-resolution screen with button-control screen. At Geno’s we have used analog gauges in our Turbo Diesel trucks, but the concept of having multiple gauges that do not require fancy gauge mounts and a lot of underhood tinkering really appeals to us. The voice of experience screams out, “It can’t be any easier than plug-and-play using the OBD-II port.” And, plug-and-play we did. We love the CTS2 (and now the CS2) as it gives you up to eight data items that you can keep track of on the screen.

CS2/CTS2 Dash Pod

Put your EDGE on the dash of your truck in a dash pod that won’t warp or deform over time. Pod is angled for easy viewing.

GAUGES, GAUGE MOUNTS & ACCESSORIES

I

BEST VALUE!

CS/CS2/CTS/CTS2 EAS EGT Kit (Daily Driver/ Tow Kit) EDGE-98620: $122.95

This kit is ideal for the daily diesel driver or if you are towing then it’s a must have! Towing can put a lot of strain on the truck and make it run hot. Don’t be left on the side of the road with an overheated truck because you didn’t watch your EGTs. (Includes EAS Starter Cable and EAS Temperature Probe.)

Catalog good through April 2020 l Prices subject to change without notice.

CS2/CTS2 A-Pillar Mount

‘10-‘18 EDGE-38405: $89.95 ‘03-‘09 EDGE-38406: $89.95

If you want a color-matched A-Pillar mount, no competitor matches EDGE. Will not warp or deform. Adapter kit included.

Order 770-886-2500 or genosgarage.com

l 43


GAUGES, GAUGE MOUNTS & ACCESSORIES

GET A GAUGE MOUNT AT HALF PRICE!

“Do you guys offer a gauge kit or package?” Nope, too many custom configurations. So, better than a kit, we let you choose gauges and buy 1, 2 or 3 gauges from us and get the corresponding gauge mount at half the price. Full A-Pillar Triple and Dual Covers TRIPLE FULL PILLAR  I ‘10-‘18 (Color-Matched) ‘03-‘09 (Color-Matched) ‘98-‘02, w/tweeter (Black only) ‘98-‘02, w/o tweeter (Black only) ‘94-‘97 (Black only)

GM-DG-17219: $91.95 GM-DG-17213: $91.95 GM-DG-17205: $80.95 GM-DG-17203: $80.95 GM-DG-17201: $83.95

‘10-‘18

‘03-‘09

DOUBLE FULL PILLAR  I ‘10-‘18 (Color-Matched) ‘03-‘09 (Color-Matched) ‘98-‘02, w/tweeter (Black only) ‘98-‘02, w/o tweeter (Black only) ‘94-‘97 (Black only)

GM-DG-17218: $85.95 GM-DG-17212: $87.95 GM-DG-17204: $83.95 GM-DG-17202: $76.95 GM-DG-17200: $77.95

Gauge mounts for ‘03-‘09 trucks available in custom-colored molded plastic (not painted) for an exact match. ‘10-‘18 matches very closely, but not 100%. ‘94-‘02 model years come in molded black plastic that can be custom-painted to match the interior.

Steering Column GAUGE Mounts  I

DUAL Mount Steering Pod (‘10-‘18) SINGLE Mount Steering Pod (‘10-‘18) DUAL Mount Steering Pod (‘03-‘09) SINGLE Mount Steering Pod (‘03-‘09)

‘89-‘02 GM-DG-15017:  $45.95 GM-DG-15015:  $41.95 GM-DG-15014:  $45.95 GM-DG-15013:  $41.95

SINGLE Mount Steering Pod (‘89-‘02) GM-DG-15012:  $41.95

Available in Black only.

(Dual mount not available for ‘91.5-‘02.)

MOPAR Single A-Pillar Replacement, ‘03-‘09 GM-DG-ZL39TL2:  $66.95

When we found this MOPAR A-pillar with the molded-in single gauge pod (used in the SRT-10 Ram truck), we were impressed. This A-pillar replacement is molded in the correct texture and color. Includes gauge pod, and the grab handle. It works perfectly with any standard 2” gauge. NOTE: Reuse factory A-pillar screw hole covers. Not included with gauge mount.

AutoMeter single and a dual steering column pods put the gauges right in front of you in an easy to see location. These gauge mounts are a cover and attach to the existing steering column cover. Molded in black plastic, they can be painted to match your truck’s interior. Receives most standard 2” gauges.

You can find additional gauge pods for your Ram truck on our website. Available in Black only.

‘03-‘09

‘98-‘02

Gauge Gizmo  I

Dual Pod (Black only) ‘98-‘02 GM-DG-15203: $39.95 ‘94-‘97 GM-DG-15200: $35.95 ‘86-‘93 GM-DG-15198: $39.95 Single Pod  (Black only) ‘10-‘18 GM-DG-P13117: $72.95

Can be modified to

work on ‘10-‘18 trucks. Dash Pods  I See TDR 81, pg. 39

TRIPLE GAUGE PODS ‘03-‘09 GM-DG-15020:  $57.95 ‘98-‘02 GM-DG-15002:  $64.95 DUAL GAUGE POD ‘03-‘09 GM-DG-15019:  $55.95 UNIVERSAL TRIPLE GAUGE POD ALL GM-DG-5288:  $108.95

Some trimming of the base required.

‘03-‘09 GM-DG-15212: $30.95 ‘98-‘02 GM-DG-15204: $31.95 ‘94-‘97 GM-DG-15201: $31.95 ‘86-‘93 GM-DG-15199: $31.95

These single or dual pod mounting brackets are a custom way to mount gauges. The Gauge Gizmo puts your preferred gauge up high on the A-pillar of your truck. Gauge Gizmos come in molded black plastic and can be custom painted to match your truck’s interior.

Universal Donut Mount Kit

GM-1DONUT:  $23.50

Rubber mounting assembly for below the dash installation.

‘03-‘09

These gauge pods mount on top of the dash almost flush against the windshield for a nice, non-obtrusive view. The dash pod is molded in black plastic, but can be painted to match your truck’s interior color.

UNIVERSAL Universal BULLET Mount

‘94-‘97 In-Dash gauge Installation Back-Plates

GM-1BULLET  $34.95

What do you do if you want to mount only one gauge, and you prefer to avoid an A-Pillar mount? Try this bullet mount from ISSPRO.

44 l Ram Turbo Diesel Parts & Accessories  #107

‘99-‘02 GM-DG-01FACE9902:  $7.50 ‘94-‘97 GM-DG-01FACE9497:  $5.50

‘99-‘02

For a custom in-dash look, we offer a black Lexan back-plate that fits into the cubby hole in the dash.

2” Gauge Mount Plug

GM-PLUG:  $3.00/each

The gauge mount plug covers the opening of unused holes in gauge mounts.

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


INTERIOR PARTS & GAUGE ACCESSORIES

Acu Temp Adapter (‘89-‘18, 5.9L & 6.7L)  I

Weatherproof Relay Kit

ACUTEMP_ADAPTER:  $32.00

The Acu Temp Adapter allows you to install any 1/8 NPT temperature sender on your cooler line. It takes less than five minutes to install over the cooler line. You never have to touch the transmission fluid, so you have no concern over fluid contamination.

RELAY-KIT:  $15.95

Have you been caught in the middle of an electrical project and found that you need a weatherproof relay kit (specifically the female receptacle with electrical pigtails and molded plastic covering the underside’s leads)?

NOTE: Experience has shown that the temperature readings using this adapter are 30° cooler than temperatures in the pan.

Problem solved. Here is a Hella-branded SPDT, 30 amp, weatherproof relay kit.

Boost Adapter (‘98.5-‘18)

3 Circuit Top Tap Connector

RLT_ADAPTER:  $7.50  I

Works with 5.9L & 6.7L engines.

Access the pressurized intake air system with this adapter for use with a boost gauge. Remove an intake manifold bolt, replace it with our Boost Adapter that has a hole in it, and you now have access to pressurized air.

MICRO FUSE KIT (‘13+) GG-FUSEMICRO: $21.95

3CIRCUIT_TOP_TAP:  $1.99

Try finding these micro fuses at any outlet other than a Ram dealer. Good luck. We heard you loud and clear. Here is our micro fuse kit for newer Ram trucks includes two each of the following micro fuses: 5 amp • 10 amp • 15 amp • 20 amp • 25 amp • 30 amp

Provides easy access to power for all of your truck accessories.

OBDII SPLITTER CABLE ASSEMBLY AM-5323:  $39.95

This low profile Auto Meter OBD-II signal splitter / pass through allows for remote location of connections for DashLink instrumentation while providing an additional easy to access connection point for other onboard devices requiring access to the OBD-II data stream.

And M case time delay fuses: 20 amp • 25 amp • 30 amp

Instrument Cluster Air Outlets, ‘98-‘02

OEM Replacement A-Pillars (‘03-‘09)

DRIVER SIDE MOP-1TE75B1AA:  $66.95 PASSENGER SIDE MOP-1TE74TL2AA:  $66.95

Replace a broken A-pillar with this Mopar OEM replacement. It is color-matched and does not require painting. Has reinforced mounting holes. Will not work with IMCO repair kits.

Dash Instrument Bezel Cover Overlay

LEFT 5014842:  $52.95

‘94-‘97, 2500/3500 PALCO_BEZ2:  $139.95

If the dash bezel in your ‘94-‘97 Ram truck is damaged, you can now affordably repair it with this plastic overlay from Palco. Simply place this bezel cover over the existing one and you are ready to go. Installs in minutes. Silicone adhesive is included.

CENTER LEFT 5014841: $57.36

NOTE: This bevel cover will require trimming to fit. It will not be as nice as the original cover, but it’s less than half the price of an OEM replacement from your local Dodge dealer.

CENTER RIGHT 5014840: $54.51

Instrument Cluster Bezel Mounting Clip (‘98-‘02) 13 clips required.

06504067:  $2.29 each

MOPAR Instrument Cluster Bezel ‘99-‘02, 2500/3500 ‘99-‘01, 1500 68042746AC : $209.00

This OEM instrument cluster bezel replaces your broken cover perfectly. TEMPERATURE Control Knob ASSORTMENT (‘94-‘97)

NOTE: New mounting clips should be used to install this bezel. Order #06504067 or re-use original clips.

DRM76829:  $9.95

Replacement A-PillarS (‘03-‘09) DRIVER SIDE DRM97631:  $49.95 PASSENGER SIDE DRM97630:  $49.95

Easy to install and durable, offering an exact fit that matches the original handle. Has reinforced mounting holes. Will not work with IMCO repair kits.

A-Pillar Grab Handle Repair Kit, (‘03-‘09) DRIVER AND PASSENGER SIDE IMCO_RPR_KIT:  $46.00 DRIVER SIDE ONLY IMCO_RPR_SINGLE:  $25.00

Instrument Cluster Bezel ‘99-‘02, 2500/3500 ‘99-‘01, 1500 DRM926469: $86.95

This lower cost instrument cluster bezel replaces the OEM cover perfectly. NOTE: 13 mounting clips included.

NOTE: This repair kit will only work if the mounting base is split. It will not work if the base is completely broken off of the A-pillar. NOTE: Will not work with new replacement A-pillars.

The OEM A-pillar grab handle in ‘03-‘09 Ram trucks is a known weak spot in the interior. Put too much weight on it and the mounting points will break. This Grab Handle Repair Kit has aluminum bushings that reinforce the mounting points to help prevent the grab handle from breaking or to repair one that is already broken.

Catalog good through April 2020 l Prices subject to change without notice.

Order 770-886-2500 or genosgarage.com 

l 45


INTERIOR PARTS & ACCESSORIES

Dash texture is not an exact match of the OEM dash.

Replacement DashboardS (‘94-‘05, 2500/3500) *Oversize shipping rates apply to replacement dashboards.

‘94-‘97

H TDR82, p14-19: Replacing Your Cracked Dash, ‘98.5-‘02

AFTERMARKET Replacement Dashboard (‘98-‘02, 3500/2500/1500) ‘98-‘02, 3500/2500 & ‘98-‘01, 1500 DRD8-2:  $259.95

Dash available in Black only. Can be custom-painted to match truck interior color.

‘98-‘02

($40 flat shipping fee to continental U.S.)

This is a full replacement dashboard. This is not a cover. It is made with a heavy-duty ABS plastic that is designed to help keep the sun from making it crack like the original dashboard. This Dodge Ram dash is more durable than the original OEM part. The dash cover is only available in black and we recommended that you paint it to match the interior color in your truck. The ‘98-‘02 dashboard is made for us to our specifications and are typically in stock here at our warehouse. Please allow 21 days for delivery. The dashboards may require some light trimming to fit. It is not a job for a novice, but is one that goes hand-in-hand with a heater core replacement.

‘03-‘05

Please call before ordering this replacement dash if you have installation questions.

‘03-‘05 DASHBOARDS

UPPER REAR DASHTOP SLATE GREY (DV) DRD3-MOP-REAR-SL: $545.00 TAUPE (L5) DRD3-MOP-REAR-TP: $545.00 $60 shipping fee on ‘03-‘05 upper rear dashtops.

UPPER FRONT DASHTOP

‘03-‘05

Covers vent area next to windshield.

SLATE GREY (DV) DRD3-MOP-FRONT-SL: $199.00 TAUPE (L5) DRD3-MOP-FRONT-TP: $199.00 $40 shipping fee on ‘03-‘05 upper front dashtops.

UPPER FRONT AND REAR DASHTOP SLATE GREY (DV) DRD3-MOP-SL-KIT: $725.00 TAUPE (L5) DRD3-MOP-TP-KIT: $725.00

BEST VALUE!

$60 shipping fee on ‘03-‘05 dashboard kits.

‘98-‘02

‘98-‘02 DASHBOARDS

AGATE (LAZ) DRD8-MOP-AGATE: $399.00 CIRRUS/MIST GREY (RC8) DRD8-MOP-MGREY: $399.00 SUEDE/CAMEL (VK9) DRD8-MOP-CAMEL: $399.00 $50 shipping fee on ‘98-‘02 dashboards.

‘94-‘97 DASHBOARD

SLATE GREY (DV) DRD4-7-MOP: $325.00 $50 shipping fee on ‘94-97 dashboards.

NOTE: The dashboards may require some light trimming to fit. It is not a job for a novice,

‘94-‘97 Rigid Plastic Dashtop Cover (‘94-‘05, 3500/2500/1500) ‘03-‘05, 2500/3500 ‘02-‘05, 1500 DASHTOP-999:  $189.00

‘98-‘02, 2500/3500 ‘98-‘01, 1500 DASHTOP-998:  $189.00

Available in Black only. Can be custom-painted to match truck interior color.

‘94-‘97, 3500/2500/1500 DASHTOP-997:  $189.00

From time to time, we get calls from truck owners looking for an affordable, high-quality dash replacement or cover to hide those unsightly cracks that inevitably occur in extreme weather conditions. When Palco Industries, Inc. approached us with their new line of DashTop dash covers for ‘94-‘05 Dodge Ram trucks, we ordered one and installed it on one of our trucks. We were pleased to find that the installation was easy, the fit was good, and the cost was reasonable. Silicone adhesive is included.  Additional shipping charges apply to dashtop systems shipping to Alaska and Hawaii.

but is one that goes hand-in-hand with a heater core replacement. See page 55.

Please call before ordering a replacement dash if you have installation questions. Replacement Dash Panel Plastic Snap-in Nut (‘94-‘09) 4 required per dash.

06504485:  $6.50 each

Dashboard Reinforcement Tabs (‘94-‘02) ‘98-‘02, 2500/3500 ‘98-‘01, 1500 GG-DRK9802:  $12.95

‘94-‘97, 2500/3500 GG-DRK9497:  $12.95

Modern dashboards are made from plastic which becomes brittle and fatigued over time. Decrease dash rattles and increase structural rigidity with these reinforcement tabs. Reinforcement tabs only work with OEM dash.

46 l Ram Turbo Diesel Parts & Accessories  #107

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


Your choice of colors:

WINDSHIELD SUNSHADE ‘19-‘20, 1500/2500/3500

with standard rearview mirror.

‘10-‘18, 2500/3500 ‘09-‘18, Ram 1500 ‘19, Ram 1500 Classic CI-11150: $60.00

‘03-‘09, 2500/3500 CI-10804: $60.00

CI-11587: $60.00

Black

Mocha

Caramel

Beige

Smoke

Gray

‘19-‘20, 1500/2500/3500

‘19-‘20, 1500

with large 10” wide sensor attached to rearview mirror.

CI-11584: $60.00

with small 5” wide sensor attached to rearview mirror.

CI-11588: $60.00

‘94-‘02, 2500/3500 CI-10558: $60.00

  Heat Shield Storage Bag - Universal Kit: ZUBAGV6: $8.00 The ULTIMAT DASH COVER is a semi-rigid carpet cover molded to the exact shape of the dashboard, resulting in a perfect fitting cover. ULTIMAT Dash Covers:  $55.00 Specify Black, Mocha, Beige or Gray when ordering.

ULTIMAT Dash Cover ‘10-‘18

Black, Mocha, Gray

ULT9184000

‘10-‘18

Black, Mocha, Gray

ULT9184001

‘06-‘09

Black, Mocha, Gray

ULT9170100

w/Alpine speakers

‘03-‘05

Black, Mocha, Gray

ULT9154100

‘98-‘02

Black, Beige, Gray

ULT9088600

‘94-‘97

Black, Beige, Gray

ULT9053100

‘81-‘93

Black, Beige, Gray

ULT9055600

INTERIOR PARTS & ACCESSORIES

Dash MATS

Looking for a dash cover to protect your dashboard from the summer heat? Whether it is an ULTIMAT Dash Mat or a DASHMAT Carpet Dash Mat, this is the answer to the hot sun. The texture of the dash cover allows you to store items on top of the dash and not worry about them rolling around.

Keep the interior of your truck cooler and protect the dash from harsh UV rays with a UVS heat shield by Covercraft. The outward-facing surface is high-quality silver reflective fabric; the inside is soft pellon felt. Both fabrics are laminated to a stiff foam board which acts as an insulator to reduce heat build-up. The laminated stiff board is what makes this item perfect for longer term, RV-type parking. For short trips, the board’s accordion-like folds make removal/installation easy.

We tried all four colors of the UltiMat and DashMat. We strongly suggest the black dash cover as it does not glare into the windshield.

Cummins “C” Logo Floor Mats

Custom floor mats are typically in the $75-$95 range, but we’re pleased to offer you Avery’s custom floor mats with the “C” logo at very competitive prices. These mats are 24-ounce nylon, and the “C” logo really stands out. The carpet colors match the MOPAR factory mats. Black mats have White logos.  Gray and Neutral mats have Black logos.

2-PC. FRONT FLOOR MATS:  $64.95 The DASHMAT DASH COVER is a flexible polycarpet, stitched cover that is cut to follow the contour of the dash. DASHMAT Dash Cover:  $35.00 Specify Black, Mocha, Caramel, Beige, Smoke or Gray when ordering.

DASHMAT Dash Cover ‘19

2500/3500

Black, Caramel, Smoke

DM226500

‘10-‘18

(Black or Gray)

‘13-‘19, Crew Cab AV-4289F (Black or Gray)

‘10-‘12, All Cab Styles AV-3067F (Black or Gray)

‘19

1500 Does not fit ‘19 Ram 1500 Classic

‘13-‘19, Standard, Quad, Mega Cab AV-4268F

Black, Caramel, Smoke

DM221100

‘03-‘09, All Cab Styles AV-1646 (Black or Gray)

Fits ‘19 Ram 1500 Classic

Black, Mocha, Gray

DM184000

‘06-‘09

Black, Mocha, Gray

DM170100

‘03-‘05

Black, Mocha, Gray

DM154100 DM088600

‘98-‘02

Black, Beige, Gray

‘94-‘97

Black, Beige, Gray

DM053100

‘81-‘93

Black, Beige, Gray

DM055600

‘94-‘02, All Cab Styles AV-1188 (Black, Gray or Neutral)

1-PC. REAR FLOOR MAT:  $53.95 ‘10-‘19, MEGA Cab only. AV-4591G (Black or Gray) ‘10-‘19 , CREW Cab only. AV-3069G (Black or Gray) ‘06-‘09, MEGA Cab only. AV-2566 (Black or Gray)

CALL US FOR AVERY CUMMINS “C” FLOOR MATS FOR YOUR FIRST GENERATION TRUCK (‘89-‘93).

All Cab Styles ‘03-‘09 AV-1649 (Black, Gray or Mocha) ‘98-‘02 AV-1158 (Black, Gray or Neutral) ‘94-‘97 AV-586 (Black, Gray or Neutral)

NOTE: ‘10-‘18 dashmat doesn’t have speaker cutouts for Alpine stereo system.

Catalog good through April 2020 l Prices subject to change without notice.

Order 770-886-2500 or genosgarage.com 

l 47


INTERIOR PARTS & ACCESSORIES

Custom ‘CUMMINS’ Shift Knobs (‘89-‘18)

Any of these custom CUMMINS shift knobs will do an outstanding job of dressing up your truck’s interior. They fit both the transmission and/or the transfer case shifter. The shift knobs measure 2” round (the approximate size of a cue ball), a comfortable size for your hand. Threaded insert is M10 x 1.5mm.

Wheelskins

All Colors/Years:  $43.95

Wheelskins Genuine Leather Steering Wheel Covers are some of the finest wheel covers you’ll find anywhere. They are hand-crafted in California from choice domestic cowhide and their exclusive patented lacing hole reinforcemenzxt design ensures a tight custom fit on any steering wheel. They are easy to install and are a perfect fit on your Turbo Diesel steering wheel.

‘CUMMINS Dependable DIESEL’

‘CUMMINS C’

SHIFT_RETRO1_RED:  $49.95 SHIFT_RETRO2_BLACK:  $49.95 SHIFT_RETRO3_SILVER:  $49.95

SHIFT_C_RED:  $49.95 SHIFT_C_BLACK:  $49.95 SHIFT_C_SILVER:  $49.95

APPLICATIONS

* ‘19 Coming Soon. * ‘12-‘18* *Will not work with heated steering wheel option. *Please check steering wheel size before ordering. Fits 15-1/2” x 4-3/8”.

‘05-‘11

‘98-‘04

‘89-‘97

BLACK

WSS01-01

GRAY

WSS01-14

SAND

WSS01-18

BLACK

WS102C-01

GRAY

WS102C-14

SAND

WS102C-18

BLACK

WS102XX-01

GRAY

WS102XX-14

SAND

WS102XX-18

BLACK

WS102X-01

GRAY

WS102X-14

SAND

WS102X-18

‘Cummins C Power’ SHIFT_KN_R (RED):  $49.95 SHIFT_KN_S (SILVER):  $49.95 SHIFT_KN_B (BLACK):  $49.95

SHIFT KNOB & PARTS SHIFT KNOB, ‘89-‘18 52104174: $22.95

5-SPD INSERT, ‘89-‘04 4446921: $6.95

RETAINING NUT 6502556: $6.95

6-SPD INSERT - G56, ‘05-‘18 55366060AB: $6.95

2003-2009 THIRD GENERATION

Billet Aluminum Door Lock KNOBS (‘03-‘09) BILLET_LOCK:  $13.95

Window/Lock Switch Bezel DRIVER SIDE (‘03-‘09, Regular Cab) Direct replacement part.

DARK SLATE GREY REPD321106 $15.95

Window/Lock Switch Bezel DRIVER SIDE - FRONT (‘06-‘09, Quad Cab) Direct replacement part.

DARK SLATE GREY RD32110002 $8.95

Window/Lock Switch Bezel PASSENGER SIDE - FRONT (‘06-‘09, Regular & Quad Cab) Direct replacement part.

DARK SLATE GREY RD32110001 $8.95

Window/Lock Switch Bezel DRIVER SIDE (‘03-‘05, Quad Cab) Direct replacement part.

DARK SLATE GREY REPD321102 $15.95 TAUPE REPD321104 $17.95

Window/Lock Switch Bezel PASSENGER SIDE (‘03-‘05, Regular & Quad Cab) Direct replacement part.

DARK SLATE GREY REPD321105 $15.95 TAUPE REPD321103 $8.95

This pair of billet aluminum door lock knobs are a neat and rugged interior upgrade.

1994-2002 SECOND GENERATION MOPAR Overhead Console Sunglass Holder (‘99-‘02, 2500/3500 & ‘99-’01, 1500)

SN96TL2AA $33.95

MOPAR Seat Recline Lever - DRIVER SIDE (‘95-‘02, Regular & Extended Cab)

55196021AA $19.95

MOPAR Seat Recline Lever - DRIVER SIDE (‘98-‘02, Quad Cab)

MOPAR Seat Lumbar Lever - DRIVER SIDE (‘95-‘02)

48 l Ram Turbo Diesel Parts & Accessories  #107

5010259AA $62.95

4797891 $20.95

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


‘13-‘18 CUP-HOLDER-DBL: $49.00 ‘03-‘12 CUP-HOLDER-03:  $49.00

(Does not fit trucks with Captain’s chairs and the big factory center console.)

‘98-‘02 CUP-HOLDER-9802:  $49.00 ‘94-‘97 CUP-HOLDER-9497:  $49.00

This cupholder will only work with the console pictured!

Increase the storage capacity of the center console and help avoid messy liquid spills in the interior of your truck with our handy cup holder. Installs in minutes to the existing console.

‘03-‘12

‘13-‘18

Automatic

‘98-‘02

The Cupholder is form fitted to the inside diameters of the console and is designed so that it does not interfere with shifting in manual transmission trucks.

Installation instructions are included.

Cup wells are 4” deep. Upper diameter: 3-3/4”. Lower diameter: 2-3/4”. The cup wells have a slot for a coffee mug handle.

‘94-‘97

Use a single self-tapping screw or velcro (included with the cup holder) to install the cup holder. The Cupholder attaches to the inside of the console. Some minor adjustments might be necessary to the console to get the lid to close properly.

Elbow Friend

The cover is removable and hand washable.

STANDARD SIZE (8.5”L x 3W”) ELBOWFRIEND-STD: $21.99/pair JUMB0 SIZE (10”L x 3W”) ELBOWFRIEND-JMB: $29.99/pair

Cup Holder (‘98-‘02)

Here is the problem: you have a truck with the same ole hard plastic door panel and it’s Available in Black color only. uncomfortable as an arm rest. Here is the quick, easy and affordable answer: Elbow Friend. It is a comfortable pillow covered with durable fabric. We found the standard size to work well for most people, but a jumbo size is available too.

GRAY 5FR421C8AE:  $167.95 AGATE 5FR421AZAE:  $167.95

Replacement cup holder for Ram 2500/3500 trucks with an automatic transmission.

INTERIOR PARTS & ACCESSORIES

Center Console Cupholders  I

‘13-‘18 ‘Double Cup’ Cupholder

Accessory/CB Mount (‘94-‘09)

CENTER CONSOLE LID KIT (‘03-‘05)

The mounting bracket uses the existing center seat bolts to hold it in place. The mounting surface for an accessory is 13” wide by 4.5” tall.

Restore functionality of your Dodge Ram’s center console lid with a Center Console Kit. Includes all the materials and hardware needed to complete the repair.

GRAY  DRM924876:  $269.95 TAUPE  DRM924877:  $256.95

‘03-‘09 WD_CB_0309: $49.00 ‘94-‘02 WD_CB1: $49.00

To attach your accessories/CB, you drill holes through the mount to correspond with the attachment points of your accessory/CB. This mount allows the use of the dash mounted cup holder and has clearance for the 4WD lever. The CB face, in most cases, will be flush with the vinyl/cloth line at the seat front. The bracket is painted satin black for rust protection. NOTE: May not work with large CBs in trucks equipped with a manual transmission. Check for clearance.

‘03-‘09

NOTE: In ‘03-‘09 trucks, the mount may interfere with the lower seat compartment handle.

Door Pocket Drink Holder (‘10-‘20) DRIVER SIDE 1LD23XXX-AA:  $43.95 PASSENGER SIDE 5NN24XXX-AA:  $16.06

Does your truck have this spiffy foam rubber insert in the truck’s side door pocket? If it doesn’t, get this one by Mopar to hold your things.

‘94-‘02

NOTE: Fits ‘06-‘09 with 40/20/40 seats only.

Console Vault – Combination Lock

Console Vault – KEYED Lock

‘10-‘18 Trucks

‘10-‘18 Trucks

CONSOLE_1028C:  $269.00

CONSOLE_1028K:  $269.00

with Bucket full floor console.

‘06-‘18 Trucks  (40/20/40) CONSOLE_1010C:  $269.00 ‘03-‘05 Trucks  (40/20/40) CONSOLE_1004C:  $269.00

‘03-‘05 40/20/40

with Bucket full floor console.

‘06-‘18 40/20/40

‘06-‘18 Trucks  (40/20/40) CONSOLE_1010K:  $269.00 ‘03-‘05 Trucks  (40/20/40) CONSOLE_1004K:  $269.00

‘10-‘18

with Bucket full floor console.

We offer these sturdy 12-gauge cold rolled plate steel security drawers (mounts in console lower compartment) for the ‘03-‘18 trucks. The Console Vault offers the best in center console property protection.

Catalog good through April 2020 l Prices subject to change without notice.

Order 770-886-2500 or genosgarage.com 

l 49


INTERIOR PARTS & ACCESSORIES

REPLACEMENT DUROFOAM Seat Cushions (‘94-‘19) I We introduced a driver’s side seat cushion for the ‘98-‘02 Dodge Ram trucks. Because of the Quad Cab/suicide rear door design of the truck, this cushion was infamous for its “left side lean.”

‘06-‘09 Cloth

With the availability of the ‘98-‘02 cushion, we had an outcry from other Turbo Diesel owners that discovered the Mopar cushion for their truck(s) had also been discontinued. We now have cushions from ‘94 all the way through the ‘19 trucks. All of our seat cushions have upgraded DuroFoam which lasts longer than OEM. They are reinforced on the left side and underneath on the set base where the foam meets the spring. Instructions included.

‘04-‘05 Leather

• Upgraded DuroFoam more durable than OEM.

‘10-‘19 Cloth

 BOTTOM Seat Cushions (‘94-‘19) I • Left side of cushion raised to prevent “left side lean.”

• Reinforcement on bottom of the cushion where seat meets springs. DRIVER SIDE SEAT CUSHIONS

‘10-‘19 GG-SC1017:  $125.00

‘04-‘05 Leather Coming Soon!

Cloth, Vinyl & Leather Non-ventilated ‘09-‘19, 2500/3500 & ‘09-‘18, 1500

‘10-‘18 GG-SCV1014:  $125.00

‘98-‘02 Regular Cab GG-SCRC9801:  $125.00

‘06-‘09 GG-SC0609CL:  $125.00

‘98-‘02 Quad Cab GG-SC9801:  $125.00

Leather & Ventilated 09-‘19, 2500/3500 & ‘09-‘18, 1500

Cloth, Vinyl & Leather

Cloth, Vinyl & Leather

Cloth, Vinyl & Leather (Will not work on Regular Cab

(Does not fit 1500 trucks.)

trucks.)

‘03-‘05 GG-SC0305:  $125.00

‘94-‘97 Regular & Extended Cab GG-SC9497:  $125.00

‘03-‘05 Cloth, Vinyl & ‘03 Leather ‘02-‘05, 1500 Cloth, Vinyl & ‘02-‘03, Leather

Cloth, Vinyl & Leather

PASSENGER SIDE SEAT CUSHIONS

‘06-‘09 GG-SC0609P:  $125.00

‘98-‘02 Quad Cab GG-SCP9801:  $125.00

‘03-‘05 Coming Soon!

‘94-‘97 Regular & Extended Cab GG-SCP9497:  $125.00

Cloth, Vinyl & Leather

Cloth, Vinyl & Leather

Cloth & Leather

DRIVER SIDE 2500/3500

PASSENGER SIDE 2500/3500

DRIVER SIDE 1500

PASSENGER SIDE 1500

CLOTH SEATS ‘10-‘19 MOP-68050461: $176.00 (also ‘09-’18, 1500) LEATHER SEATS ‘10-‘18 MOP-68064271: $295.00 ‘06-‘09 Not available. ‘04-‘05 MOP-5140697: $189.00 40/20/40 CLOTH & VINYL SEATS ‘09-‘18 MOP-68050461: $176.00 ‘06-‘08 MOP-5178109AA: $67.00 40/20/40 BUCKET LEATHER SEATS ‘10-‘18 MOP-68064271: $295.00 ‘06-‘08 MOP-5180027AA: $159.95

CLOTH SEATS ‘10-‘19 MOP-68050462: $199.00 ‘06-‘09 MOP-5180020: $179.95 ‘04-‘05 MOP-5127750: $239.95 ‘03 MOP-5093780:  $121.00 LEATHER SEATS ‘10-‘18 MOP-68064270: $279.00 ‘06-‘09 Not available. ‘04-‘05 Not available. ‘03 MOP-5093780:  $121.00 CLOTH SEATS ‘09-‘18 MOP-68050462: $199.00 LEATHER SEATS ‘10-‘18 MOP-68064270: $279.00 ‘04-‘05 MOP-5127750: $239.95 ‘02-‘03 MOP-5093780: $121.00

Fits trucks with Occupant Classification System module under the seat cushion on driver side. NOTE: Does not fit Mega Cab trucks.

Cloth, Vinyl & Leather

REPLACEMENT SEAT MOTORS AND GEARS SEAT MOTORS ‘03-‘09, 2500/3500 & ‘02-‘05, 1500

MOTOR GEAR KITS ‘03-‘09, 2500/3500 & ‘02-‘05, 1500

Forward/Backward Adjustment

SEAT-DOD4: $65.00

Up/Down Adjustment (FRONT)

SEAT-DOD1: $89.00

Forward/Backward Adjustment All factory gear cases, thrust washers and roll pins must be reused.

Up/Down Adjustment (FRONT) Must reuse factory tube nut, gear shims and thrust washers.

Up/Down Adjustment (REAR)

Up/Down Adjustment (REAR) Must reuse factory tube nut, gear shims and thrust washers. SEAT-DOD6: $ 89.00

‘94-‘97, 1500/2500/3500 SEAT-DOD3: $65.00

Up/Down Adjustment

SEAT-DOD5: $82.00

SEAT-DOD2GS: $55.00

‘94-‘97, 1500/2500/3500 Forward/Backward Adjustment

Forward/Backward Adjustment

Must reuse factory tube nut, gear shims and thrust washers.

Up/Down Adjustment

50 l Ram Turbo Diesel Parts & Accessories  #107

SEAT-DOD1GS: $55.00

SEAT-DOD2: $80.00

‘98-‘02, 2500/3500 & ‘98-‘01, 1500 Up/Down Adjustment Motor Conversion Kit

SEAT-DOD14: $109.00

Must reuse factory tube nut, gear shims and thrust washers.

SEAT-DOD13: $109.00

SEAT-DOD5GS: $55.00

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


NOTE: Not all colors available.

Replace a worn out bottom seat cover in your ‘98-‘12 Dodge Ram with these ‘Factory-Match’ OEM style replacement seat bottom covers. All of the covers use either original or new production material and they are all made in the USA.

Made in the USA

’OEM-STYLE’ BOTTOM Seat COVERS (‘98-‘05)

Mopar offered many different materials for side panels (fabric; carpet and vinyl). We tried to match the most popular Mopar combinations. Therefore your side panels may differ in material. At the moment, we do not have an option for Tan material.

The seats are offered with a Waterfall or non-Waterfall front which refers to how the upholstery is stitched on the front of the seat. Check the seat in your truck before ordering as they are not interchangeable.

DRIVER SIDE

‘03-‘05 Quad Cab SLT, Electric, 40/20/40 - Trim Code M9DV (Dark Slate) HU-L03ADE-M9DV:  $225.00 ‘03-‘05 Quad Cab SLT, Manual, 40/20/40 - Trim Code V9DV (Dark Slate) HU-L03ADM-V9DV:  $225.00 ‘98-‘02 Quad Cab SLT, 40/20/40 - Trim Code R1AZ (Dark Slate/Agate) HU-L98QDX-R1AZ:  $199.00

Waterfall Front

non-Waterfall Front

‘98-‘02 Quad Cab SLT, 40/20/40 - Trim Code R1C3 (Light Grey) HU-L98QDX-R1C3:  $199.00

INTERIOR PARTS & ACCESSORIES

’factory-match’ BOTTOM Seat COVERS (‘06-‘12)

‘98-‘02 Standard Cab - Trim Code R1AZ (Dark Grey/Agate) HU-L98RDX-R1AZ:  $245.00 ‘98-‘02 Standard Cab - Trim Code R1C3 (Light Grey) HU-L98RDX-R1C3:  $245.00 PASSENGER SIDE

‘03-‘05 Quad Cab SLT, Electric and Manual, 40/20/40 - Trim Code M9DV (Dark Slate) HU-L03APE-M9DV:  $225.00 ‘98-‘02 Quad Cab SLT, 40/20/40 - Trim Code R1AZ (Dark Grey/Agate) HU-L98QPX-R1AZ:  $199.00 ‘98-‘02 Quad Cab SLT, 40/20/40 - Trim Code R1C3 (Light Grey) HU-L98QPX-R1C3:  $19.00 ‘98-‘02 Standard Cab - Trim Code R1AZ (Dark Grey/Agate) HU-L98RPX-R1AZ:  $245.00 ‘98-‘02 Standard Cab - Trim Code R1C3 (Light Grey) HU-L98RPX-R1C3:  $245.00

Seat Heater Kit by Rostra

‘06-‘12 Leather/Vinyl Seat Cushion Bottoms - Driver Side Call us or visit our website for details and part numbers to order. ‘10-‘12, 2500/3500 & ‘09-‘12, 1500 Laramie (All Cabs) Bucket Seats or 40/20/40 Seats Dark Slate & Pebble Beige Waterfall Front or non-Waterfall Front: $229.00 ‘10, 2500/3500 & ‘09-‘10, 1500 Laramie (All Cabs) Bucket Seats or 40/20/40 Seats Dark Slate & Pebble Beige non-Waterfall Front: $229.00 ‘06-‘09, 2500/3500 & ‘06-‘08, 1500 Laramie Bucket Seats or 40/20/40 Seats Khaki & Medium Slate Waterfall Front or non-Waterfall Front: $219.00

ROSTRA-250-1870: $58.00 (each)

What do you do if you did not order the factory-installed, heated seats in your Dodge truck? The answer is a Rostra Controls seat heater kit. The heat elements warm up quickly and the two-position switch allows for High/Low operation. Position of the heater elements requires removal of the seat covers. Install the heaters in the conventional manner (bottom and back) or stack the heating elements for a back-only heat. ‘06-‘09 Cloth Seat Cushion Bottoms - Driver Side Call us or visit our website for details and part numbers to order.

NOTE: This kit is not a replacement for OEM seat heaters.

DRIVER SIDE Bottom Seat Cushion Cover,

Bottom Seat Cu sh Cover $35 with ion th purchase of se e at cushion. Save $10.

‘06-‘09, 2500/3500 SLT - All Cabs 40/20/40 Seats Khaki & Dark Medium  Starting at: $159.00

(‘98-‘02, Quad & Extended Cab) CHARCOAL SHG001PC-CH:  $48.00

Did you also wear out the OEM fabric on your ‘98-‘02 seat? Here is a cost-effective replacement driver side seat cover made from Khaki material. After all, you can’t sit on uncovered foam.

Catalog good through April 2020 l Prices subject to change without notice.

Order 770-886-2500 or genosgarage.com 

l 51


INTERIOR PARTS & ACCESSORIES

Other Carhartt seat covers are available for ‘94-‘02 and ‘14 and up trucks. Please call us or check our website for applications.

FRONT SEAT STYLE/YEAR

COLOR/PART#

Laramie/Sport (‘14-‘18) Bucket seats with adjustable headrests and seat air bags. This seat configuration has a big factory console between the seats.

Brown SS-2476CA-BN

All Cabs (‘13-‘16) 40/20/40 seats with adjustable headrests, fold-down console w/3 cupholders & lid, seat airbag and without center storage.

Brown SS-3435CA-BN

All Cabs (‘13-‘16) 40/20/40 seats with adjustable headrests, fold-down console w/3 cupholders & lid, seat airbag and with center storage.

Brown SS-3438CA-BN

Reg/Mega/Crew/Quad (‘11-‘16) 1500/2500/3500 Bucket seat with adjustable headrests with seat airbag. Does not fit Laramie or Sport.

Brown SS-2459CA-BN

Laramie (‘12-‘13) Bucket seats with adjustable headrests. This configuration has a big factory console between the seats.

Brown SS-2450CA-BN

Mega/Crew/Quad/Reg (‘11-‘16) 40/20/40 w/adjustable headrests, seat airbag, fold-down console (covered), without center seat storage. Mega/Crew/Quad/Reg (‘11-‘12) 40/20/40 w/adjustable headrests, seat airbag, center seat storage, fold-down console (covered), with or without center seat storage, and built-in storage tray.

$223.00

Gravel SS-2476CA-GY

$276.00

Gravel SS-3435CA-GY

$276.00

Gravel SS-3438CA-GY

$223.00

Gravel SS-2459CA-GY

custom fit SEAT COVERS

Carhartt famous rugged durability is now available in SeatSaver™ seat protectors. Don’t let the good looks fool you. These seat protectors are tough as nails with heavy duty, firm-hand Carhartt® breathable duck weave fabric and triple stitched main seams. Your butt might wear out before these seat protectors. Available in Carhartt Brown and Gravel colors they feature storage pockets with signature Carhartt rivets and a Durable, Water-Repellent (DWR) finish. They’ll always look good no matter how bad you treat ‘em. FEATURES & BENEFITS

$223.00

Gravel SS-2450CA-GY Brown SS-3430CA-BN $276.00

Gravel SS-3430CA-GY Brown SS-3429CA-BN

• Carhartt ® brand logo and styling • Custom patterned for a perfect fit • Easy to install / easy to remove • Protect seats from sun, dirt, workweek abuse • Durable Water Repellency (DWR) finish for spills • Strong overlapped, double & triple-stitched seams • Easily removed for cleaning and washing in home washer/dryer • Headrest & center console covers

BROWN

GRAVEL

$276.00

Gravel SS-3429CA-GY

Mega/Crew/Reg (‘10-‘12) 40/20/40 w/adjustable headrests, center seat storage and fold-down console (covered).

Brown SS-3410CA-BN

Mega/Crew/Reg (‘10-‘12) 40/20/40 w/adjustable headrests and fold-down console. This design doesn’t accommodate consoles with storage under the seat area.

Brown SS-3405CA-BN

ST & SLT (‘10-‘12) Mega/Crew/Quad/Reg Bucket seats with adjustable headrests. Does not fit Laramie or Sport.

Brown SS-2430CA-BN

Laramie/Sport (‘10-‘11) Bucket seats with adjustable headrests. This seat configuration has a big factory console between the seats.

Brown SS-2405CA-BN

Laramie/Sport (‘10-‘12) 40/20/40 seats with adjustable headrests and covered center seat storage.

Brown SS-3413CA-BN

Mega/Quad/Reg (‘09-‘14) 40/20/40 seats with adjustable headrests and fold down console (covered).

Brown SS-3445CA-BN

Mega/Quad/Reg (‘06-‘09) 40/20/40 seats with adjustable headrests and fold down console (covered).

Brown SS-3372CA-BN

Mega/Quad/Reg (‘06-‘09) Bucket seats with adjustable headrests.

PRICE

$276.00

Gravel SS-3410CA-GY

$276.00

Gravel SS-3405CA-GY

$223.00

Gravel SS-2430CA-GY

$223.00

Gravel SS-2405CA-GY

REAR SEAT STYLE/YEAR $276.00

Gravel SS-3413CA-GY

$276.00

Gravel SS-3445A-GY

$276.00

Gravel SS-3372CA-GY Brown SS-2398CA-BN $223.00

Gravel SS-2398CA-GY

Quad Cab/Reg (‘04.5-‘05) 40/20/40 seats with adjustable headrests, with opening for lumbar dial and fold-down console (covered).

Brown SS-3358CA-BN

Quad Cab/Reg (‘03-‘04) 40/20/40 seats with adjustable headrests, without opening for lumbar dial and fold-down console (covered).

Brown SS-3344CA-BN

$276.00

Gravel SS-3358CA-GY

$276.00

Gravel SS-3344CA-GY

52 l Ram Turbo Diesel Parts & Accessories  #107

COLOR/PART#

Crew/Quad Cab (‘11-‘19) 60/40 split seats with 3 adjustable headrests with fold-down armrest.

Brown SS-8396CA-BN

Crew/Quad Cab (‘11-‘19) 60/40 split seats with 3 adjustable headrests (2 large, 1 small) without fold-down armrest.

Brown SS-8397CA-BN

Crew Cab Only (‘11-‘19) Full bench seat w/3 adj. headrests and center shoulder belt.

Brown SS-7432CA-BN

Crew Cab (‘10) 60/40 split seats w/3 adj. headrests & fold-down cup holder.

Brown SS-8385CA-BN

Quad Cab 60/40 (‘04-‘08) 60/40 with adjustable headrest.

Brown SS-7366CA-BN

Quad Cab Full Bench (‘04-‘09) Full bench with adjustable headrests.

Brown SS-7361A-BN

Quad Cab Full Bench (‘03) Seats without headrests.

Brown SS-6348CA-BN

Quad Cab 60/40 (‘03) Seats without headrest.

Brown SS-7347CA-BN

Gravel SS-8396CA-GY

PRICE $281.00

$281.00

Gravel SS-8397CA-GY

Gravel SS-7432CA-GY

Gravel SS-8385CA-GY

Gravel SS-7366CA-GY

Gravel SS-7361CA-GY

Gravel SS-6348CA-GY

Gravel SS-7347CA-GY

$217.00

$281.00

$217.00

$217.00

$154.00

$217.00

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


FRONT SEAT STYLE/YEAR

Custom Fit Seat Covers Keep the seats in your Ram 1500/2500/3500 truck looking new or cover up damaged seats with the addition of custom fit slip-on Covercraft SeatSaver seat protectors. They protect against dirt and outdoor sun to help keep the seats looking like new. The seat covers are made with a breathable heavy-duty polycotton fabric so they are comfortable and you won’t stick to them like other kinds of seat covers. We find the fabric to be slightly lighter than blue jeans, but heavier than polyester/wool. The fabric is protected with a durable water repellent finish that prevents most spills from reaching the seats. You’ll like the washable fabric that has proven to be durable, yet not too bulky.

REAR SEAT STYLE/YEAR Crew/Quad Cab (‘11-‘19) 60/40 split seats with 3 adjustable headrests with fold-down armrest. Crew/Quad Cab (‘11-‘19) 60/40 split seats with 3 adjustable headrests (2 large, 1 small) without fold-down armrest. Crew Cab Only (‘11-‘19) Full bench seat w/3 adj. headrests and center shoulder belt. Crew/Quad Cab (‘10) 60/40 split seats w/2 adj. headrests, center shoulder belt & no armrest. Crew Cab (‘10) 60/40 split seats w/3 adj. headrests & fold-down cup holder. Mega Cab (‘08-‘09) 60/40 split seats w/3 adj. headrests and fold-down cup holder. Mega Cab (‘06-‘07 and ‘10-‘17) 60/40 split seats w/adj. headrests and fold-down cup holder. Quad Cab 60/40 (‘04-‘08) 60/40 with adjustable headrest.

COLOR/PART#

PRICE

Charcoal SS-8396-CCCH Misty Gray SS-8396-CCCT

$210.00

Wet Sand SS-8396-CCSA Charcoal SS-8397-CCCH Misty Gray SS-8397-CCCT

$210.00

Wet Sand SS-8397-CCSA Charcoal SS-7432-CCCH Misty Gray SS-7432-CCCT

$163.00

Wet Sand SS-7432-CCSA Charcoal SS-8386-CCCH Misty Gray SS-8386-CCCT

$210.00

Wet Sand SS-8386-CCSA Charcoal SS-8385-CCCH Misty Gray SS-8385-CCCT

$210.00

Wet Sand SS-8385-CCSA Charcoal SS-8380-CCCH Misty Gray SS-8380-CCCT

$210.00

Wet Sand SS-8380-CCSA Charcoal SS-8363-CCCH Misty Gray SS-8363-CCCT

$210.00

Wet Sand SS-8363-CCSA $163.00

Wet Sand SS-7366-CCSA Quad Cab Full Bench (‘04-‘09) Full bench with adjustable headrests.

Charcoal SS-7361-CCCH Misty Gray SS-7361-CCCT

$163.00

Wet Sand SS-7361-CCSA Quad Cab Full Bench (‘03) Seats without headrests.

Quad Cab 60/40 (‘03) Seats without headrest.

Charcoal SS-6348-CCCH Misty Gray SS-6348-CCCT

$95.00

Wet Sand SS-6348-CCSA

All Cabs (‘13-‘16) 40/20/40 seats with adjustable headrests, fold-down console w/3 cupholders & lid, seat airbag and without center storage.

Misty Gray SS-3435-CCCT

$163.00

Wet Sand SS-7347-CCSA Gray SS-6271-CCGY Taupe/Tan SS-6271-CCTP

Catalog good through April 2020 l Prices subject to change without notice.

Charcoal SS-3438-CCCH

Misty Gray SS-2459-CCCT

Laramie (‘12-‘13) Bucket seats with adjustable headrests. This configuration has a big factory console between the seats.

Misty Gray SS-2450-CCCT

Mega/Crew/Quad/Reg (‘11-‘16) 40/20/40 w/adjustable headrests, seat airbag, fold-down console (covered), without center seat storage.

Misty Gray SS-3430-CCCT

Mega/Crew/Quad/Reg (‘11-‘12) 40/20/40 w/adjustable headrests, seat airbag, center seat storage, fold-down console (covered), with or without center seat storage, and built-in storage tray.

Misty Gray SS-3429-CCCT

Mega/Crew/Reg (‘10-‘12) 40/20/40 w/adjustable headrests, center seat storage and fold-down console (covered).

Misty Gray SS-3410-CCCT

Mega/Crew/Reg (‘10-‘12) 40/20/40 w/adjustable headrests and fold-down console. This design doesn’t accommodate consoles with storage under the seat area.

Misty Gray SS-3405-CCCT

ST & SLT (‘10-‘12) Mega/Crew/Quad/Reg Bucket seats with adjustable headrests. Does not fit Laramie or Sport.

Misty Gray SS-2430-CCCT

Laramie/Sport (‘10-‘11) Bucket seats with adjustable headrests. This seat configuration has a big factory console between the seats.

Misty Gray SS-2405-CCCT

Laramie/Sport (‘10-‘12) 40/20/40 seats with adjustable headrests and covered center seat storage.

Misty Gray SS-3413-CCCT

Mega/Quad/Reg (‘09-‘14) 40/20/40 seats with adjustable headrests, fold down console (covered) and seat airbag. Without cup holders, and center seat storage.

Misty Gray SS-3445-CCCT

Mega/Quad/Reg (‘06-‘09) 40/20/40 seats with adjustable headrests and fold down console (covered).

Misty Gray SS-3372-CCCT

Mega/Quad/Reg (‘06-‘09) Bucket seats with adjustable headrests.

Misty Gray SS-2398-CCCT

Quad Cab/Reg (‘04.5-‘05) 40/20/40 seats with adjustable headrests, with opening for lumbar dial and fold-down console (covered).

Misty Gray SS-3358-CCCT

Quad Cab/Reg (‘03-‘04) 40/20/40 seats with adjustable headrests, without opening for lumbar dial and fold-down console (covered).

Misty Gray SS-3344-CCCT

Std/Ext/Club Cab (‘94-‘97) 40/20/40 seats.

$205.00

Wet Sand SS-3435-CCSA

Reg/Mega/Crew/Quad (‘11-‘16) 1500/2500/3500 Bucket seat with adjustable headrests with seat airbag. Does not fit Laramie or Sport.

Std Cab (‘98-‘02) $95.00

$168.00

Charcoal SS-3435-CCCH

Misty Gray SS-3438-CCCT

Quad Cab (‘98-‘02) 40/20/40 seats.

PRICE

Wet Sand SS-2476-CCSA

All Cabs (‘13-‘16) 40/20/40 seats with adjustable headrests, fold-down console w/3 cupholders & lid, seat airbag and with center storage.

Charcoal SS-7347-CCCH Misty Gray SS-7347-CCCT Charcoal SS-6271-CCCH

All Cab Styles (‘94-‘02)

Misty Gray SS-2476-CCCT

Charcoal SS-7366-CCCH Misty Gray SS-7366-CCCT

COLOR/PART# Charcoal SS-2476-CCCH

Laramie/Sport (‘14-‘18) Bucket seats with adjustable headrests and seat air bags. This seat configuration has a big factory console between the seats.

$205.00

Wet Sand SS-3438-CCSA Charcoal SS-2459-CCCH $168.00

Wet Sand SS-2459-CCSA Charcoal SS-2450-CCCH $168.00

Wet Sand SS-2450-CCSA Charcoal SS-3430-CCCH $205.00

Wet Sand SS-3430-CCSA Charcoal SS-3429-CCCH 205.00

Wet Sand SS-3429-CCSA

INTERIOR PARTS & ACCESSORIES

Other front seat covers are available for 2014 and up trucks. Please call us or check our website for applications.

Charcoal SS-3410-CCCH $205.00

Wet Sand SS-3410-CCSA Charcoal SS-3405-CCCH $205.00

Wet Sand SS-3405-CCSA Charcoal SS-2430-CCCH $168.00

Wet Sand SS-2430-CCSA Charcoal SS-2405-CCCH $168.00

Wet Sand SS-2405-CCSA Charcoal SS-3413-CCCH $205.00

Wet Sand SS-3413-CCSA Charcoal SS-3445-CCCH $205.00

Wet Sand SS-3445-CCSA Charcoal SS-3372-CCCH $205.00

Wet Sand SS-3372-CCSA Charcoal SS-2398-CCCH $168.00

Wet Sand SS-2398-CCSA Charcoal SS-3358-CCCH $205.00

Wet Sand SS-3358-CCSA Charcoal SS-3344-CCCH $205.00

Wet Sand SS-3344-CCSA Charcoal SS-3251-CCCH Gray SS-3251-CCGY

$205.00

Taupe/Tan SS-3251-CCTP Charcoal SS-3250-CCCH Gray SS-3250-CCGY

$205.00

Taupe/Tan SS-3250-CCTP

Order 770-886-2500 or genosgarage.com 

l 53


INTERIOR PARTS & ACCESSORIES

1994-2002 SECOND GENERATION

1989-1993 FIRST GENERATION DORMAN Headlight Switch Repair Pigtail (‘89-‘97)

DRM645938 $36.95

MOPAR Replacement Headlight Switch  (‘89-‘93)

56021898AB $59.95

DORMAN Window Lift Motor (‘90-‘93) Passenger Side

DRM742306 $68.95

DORMAN Window Lift Motor (‘90-‘93) Driver Side

DRM742307 $71.95

MOPAR Power Lock Switch (‘91-‘97) Single Switch

4373860 $22.95

DORMAN Electric Window Switch (‘89-‘93) Passenger Side

MOPAR Speedometer Sensor with Pinion and Wiring Adapter (‘93-‘97) 3 wire sensor and hard wiring is required.

5013609AA $33.95

MOPAR Overhead Console Map Light Harness and Switch with Temperature and Compass (‘99-‘02, 2500/3500)

50136408AA $44.95

MOPAR Headlight Switch with Cargo Light & without Foglights (‘99-‘02)

56021673AD $74.95

MOPAR Headlight Switch (‘94-‘97) Repair harness and connector included.

DRM742315 $52.95

DORMAN Window Lift Motor (‘94-‘02) Passenger Side

DRM742314 $51.95

DORMAN Door Lock Actuator (‘94-‘02) Driver Side

DRM931634 $104.95

DORMAN Door Lock Actuator (‘94-‘02) Passenger Side

DRM931635 $122.95

DORMAN Power Window and Lock Switch DRIVER SIDE (‘99-‘02)

DRM901440 $55.95

MOPAR Power Window and Lock Switch, 3-gang DRIVER SIDE (‘99-‘02)

56021912AB $99.95

MOPAR Power Window and Lock Switch, 3-gang DRIVER SIDE (‘98)

56021383 $69.95

MOPAR Power Window and Lock Switch, 2-gang PASSENGER SIDE (‘98)

56020394 $42.95

MOPAR Power Lock Switch (‘91-‘97) Single Switch

4373860 $22.95

56021675AE $79.95 DORMAN Power Window Switch - DRIVER SIDE (‘94-‘97, 2500/3500)

DRM901458 $26.95

MOPAR 8-way Power Seat Switch DRIVER SIDE (‘98-‘02, 2500/3500 & ‘98-‘01, 1500)

56045025AA $169.95

MOPAR 6-way Power Seat Switch w/o Lumbar DRIVER SIDE (‘94-‘02 & ‘04-‘09)

56049777AA $71.95

68148078AA $82.95

04886449AB $76.95

DORMAN Headlight Switch Repair Pigtail (‘89-‘97)

DRM645938 $36.95

MOPAR Brake Light Switch (‘01-‘09)

5083344AA $22.95

MOPAR Brake Light Switch (‘99-‘00)

5016294AD $20.95

MOPAR Brake Light Switch (‘94-‘98)

4671336AD $19.95

54 l Ram Turbo Diesel Parts & Accessories  #107

DORMAN Window Lift Motor (‘94-‘02) Driver Side

5013660AA $34.95

MOPAR Overhead Console Map Light Harness and Switch without Temperature and Compass (‘99-‘02, 2500/3500 & ‘99-’01, 1500)

MOPAR Headlight Switch (‘98)

56021048 $22.95

DRM901402 $36.95

1994-2002 SECOND GENERATION

MOPAR Headlight Switch with Cargo Light & with Foglights (‘99-‘02)

MOPAR Overdrive Switch (‘98-‘02)

DORMAN Hood Release Cable (‘94-‘05) 1500/2500/3500

DORMAN Parking Brake Release Handle (‘98-‘02) ‘98-‘02, 2500/3500 ‘98-‘01, 1500

Fuse Panel Cover (‘94-‘97) Paint to match interior.

DRM912086 $43.95

DRM74934 $22.95

5CU60PD5 $19.09

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


MOPAR Heater Core (‘94-‘02) 2500 & 3500

2003-2009 4720008 $128.00

MOPAR A/C Evaporator (‘95-‘02) 2500 & 3500

5012534 $337.14

MOPAR A/C Evaporator Foam (‘94) 2500 & 3500

V9900006 $18.00

MOPAR AC/Heater Blower Motor Assembly (‘97-‘02)

THIRD GENERATION

MOPAR 6-way Power Seat Switch without Lumbar Support - DRIVER SIDE (‘94-‘02 & ‘04-‘09)

56049777AA $71.95

MOPAR Power Seat Switch without Lumbar Support - PASSENGER SIDE (‘04-‘09)

56049776AA $49.95

MOPAR A/C Evaporator (‘03-‘06) 2500 & 3500

68234947AA $369.08

MOPAR Heater Core (‘03-‘09) 2500 & 3500

68004228AB $109.95

MOPAR Blower Motor Resistor (‘03-‘09)

68004539AA $52.95

5015866AA $149.95

MOPAR Blower Motor (‘95-‘96) **Does not include the blower motor wheel. See #04720009 below.

04778417 $116.95

MOPAR Blower Motor Wheel (‘94-‘02) **This part is for 04778417.

04720009 $52.95

DORMAN Climate Control Blower Motor Resistor (‘94-‘02)

DRM973020 $28.95

DORMAN Blower Motor Resistor Repair Pigtail (‘94-‘02)

DRM645701 $14.95

Brake & Clutch Pedal Pad (‘94-‘02) For manual transmission trucks. Also fits ‘94-‘01, 1500.

52009562 $19.95

DORMAN Brake Pedal Pad (‘03-‘19) For automatic transmission trucks.

DRM20785 $8.95

DORMAN Brake & Clutch Pedal Pad (‘03-‘18) For manual transmission trucks.

DRM20780 $8.95

DORMAN Hood Release Cable (‘94-‘05) 1500/2500/3500

DRM603775 $42.95

MOPAR Headlight Switch without Fog Lights (‘03-‘05)

56045536AC $67.95

MOPAR Brake Light Switch (‘01-‘09)

5083344AA $20.95

INTERIOR PARTS & ACCESSORIES

1994-2002 SECOND GENERATION

2003-2009 THIRD GENERATION DORMAN Door Lock Actuator ‘03-‘09) Front

DRIVER DRM931636: $73.95 PASSENGER DRM931637: $73.95

DORMAN Door Lock Actuator (‘03-‘09) Rear - Quad Cab only.

DRIVER DRM931644: $75.95 PASSENGER DRM931645: $75.95

DORMAN Window Lift Motor (‘03-‘09) Front

DRIVER DRM742440: $52.95 PASSENGER DRM742441: $52.95

DORMAN Window Lift Motor (‘03-‘09) Rear - Quad Cab only.

DRIVER DRM742442: $38.95 PASSENGER DRM742443: $36.95

MOPAR Power Door Switch with Lockout - DRIVER SIDE - Quad Cab (‘03-‘09, 2500/3500 ‘08-‘10, 3500/4500/5500 CC)

68171680AB $105.00

DORMAN 5-Button Master Power Window and Lock Switch - DRIVER SIDE (‘03-‘09, 2500/3500 Regular Cab)

DRM901484 $98.95

MOPAR Rear Door Harness Mega Cab (‘06-‘09)

56051393AA $127.95

MOPAR Rear Door Harness - Quad Cab (‘08-‘10, 3500/4500/5500 CC ‘03-‘09, 2500/3500, ‘02-‘08, 1500)

56051694AA $124.95

Catalog good through April 2020 l Prices subject to change without notice.

MOPAR Parking Brake Release Handle  NEW! ‘03-‘05, 2500/3500 & ‘02-‘05, 1500

DORMAN Keyless Entry Remote and Programmer (‘03-‘05)

Slate Grey WL85XDV $28.95

Taupe WL85WL5AB $28.95

DRM99164 $52.95

2010-2020 FOURTH GENERATION MOPAR A/C Evaporator (‘10-‘18) 2500 & 3500 (‘09-‘18) 1500

Programmable Keyless Entry Remote (‘11-‘12) For Ram 1500/2500/3500 trucks. Includes 3 button programmer.

DORMAN Window Lift Motor (‘10-18) ‘10-‘18, 2500/3500/4500/5500 ‘09-‘18, 1500

NEW! 68048895AA $214.95

DRM99360 $98.95

DRIVER DRM742439: $47.95

PASSENGER DRM742438: $47.95

MOPAR Blower Motor Resistor (‘10-‘18)

68048900 $32.97

DORMAN Brake Pedal Pad (‘03-‘19) For automatic transmission trucks.

DRM20785 $8.95

DORMAN Brake & Clutch Pedal Pad (‘03-‘18) For manual transmission trucks.

DRM20780 $8.95

DORMAN Parking Brake Handle (‘06-‘10) ‘08-‘10, 3500/4500/5500 CC ‘06-‘09, 2500/3500 ‘06-‘08, 1500

DRM74445 $28.95

Order 770-886-2500 or genosgarage.com 

l 55


INTERIOR PARTS & ACCESSORIES

WEATHERSTRIPPING 1989-1993 FIRST GENERATION

1994-2002 SECOND GENERATION Aftermarket Windshield Molding, ‘94-‘99

Aftermarket Windshield Weatherstrip Seal with Trim Groove for Lock Strip This windshield seal goes first on the body then the glass is placed in the opening. A separate lockstrip (not included) inserts into the rubber and secures the glass in place. Made from ozone resistant EPDM rubber and from the same OE specs as the original for an authentic fit and finish.

WCR-914 $49.95

Aftermarket Driver or Passenger Side Door Regular Cab, Extended Cab & Quad Cab (also fits ‘94-‘01, 1500)

Aftermarket Windshield Glass Seal Lockstrip This chrome lockstrip inserts into the weatherstrip to lock in the glass. Made from ozone resistant EPDM rubber and from the same OE specs as the original for an authentic fit and finish. For use with windshield seal WCR-914. Includes center clip/clamp. Does one application.

Aftermarket Driver or Passenger Side Door  V Regular or Extended Cab Seal presses on the pinchweld lip on the body and fits either the driver or passenger doors. Made from the ozone resistant EPDM rubber and the same OEM specs to install and fit for an authentic appearance.

WLS-913/914-SP $19.95

These beltlines mount with the pre-applied clips on the left & right doors to sweep the inside & outside of the glass. Made from the original specs and high quality ozone resistant materials to fit your vehicle.

DWB-3110-78 $23.95

WFK-3111-80 $79.95

WBL-1129 $46.95

WCR-1129 $46.95

WLS-1129-C $20.95

QUAD CAB  V LEFT: DWL-3110-98 $42.95 RIGHT: DWR-3110-98 $42.95 DRIVER SIDE DWL-3120-98 $42.95

PASSENGER SIDE DWR-3120-98 $42.95

DRIVER SIDE

GRK-3110-94L $32.95

PASSENGER SIDE GRK-3110-94R $32.95

WFK-3110-94 $46.95

Aftermarket Rear Window Seal without Trim Groove for Lockstrip

(also fits ‘94-‘97, 1500) This rear window seal fits the R-series models. This application goes first on the glass and is installed using the rope-in method. Made from ozone resistant EPDM rubber and from the same OE specs as the original for an authentic fit and finish Will not work with OEM sliding windows.

Fits: ‘03-‘09, 2500/3500 ‘08-‘10, 4500/5500 ‘02-‘08, 1500

MOPAR Rear Door Seals - Quad Cab Left and Right Side (mounts on body) Fits: ‘03-‘09, 2500/3500 ‘08-‘10, 4500/5500 ‘02-‘08, 1500

PRP-0002 $9.95

Lockstrip Molding Center Joint Clamp

56 l Ram Turbo Diesel Parts & Accessories  #107

DWB-3110-94 $29.95

Sold only as a kit.

MOPAR Front Door Seals Left and Right Side (mounts on body)

Lockstrip Insert Tool

This center joint is made from myler chrome and covers the seam where the two ends meet. Made from the OEM specs to install and fit for an authentic appearance. 1 required per vehicle.

REGULAR OR EXTENDED CAB

WBL-DB8791 $44.95

2003-2009 THIRD GENERATION

Aftermarket Glass Seal Lockstrip

It is specifically designed for self-sealing twopiece rubber weatherstripping. The eye of the tool threads locking strip into the groove and inserts it into the channel. For use with rear window seal WCR-1129.

The glass run simply presses into the front, top & back section of the glass channel. A separate smaller run is installed inside the door in the back channel. This two-piece kit fits one side.

These beltlines mount with the pre-applied clips on the left & right doors to sweep the inside & outside of the glass. Made from the original specs and high quality ozone resistant materials to fit your truck.

Aftermarket Rear Window Seal with Trim Groove for Lockstrip

This chrome lockstrip inserts into the weatherstrip to lock in the glass for the rear window. It’s sold as a single piece to do one application. Our product is made from the original specs and high quality ozone resistant materials. For use with rear window seal WCR-1129.

This door weatherstrip attaches with the preapplied clips to the vertical left rear side of the quad cab. It’s made from high quality ozone resistant EPDM rubber.

WFS-D1176-98A $14.95

Aftermarket Driver and Passenger Side Window Beltline Seal Kit

Aftermarket Rear Window Seal without Trim Groove for Lockstrip

This rear window seal goes first on the body then the glass is placed in the opening. A separate lockstrip (not included) inserts into the rubber and secures the glass in place. Made from ozone resistant EPDM rubber and conforms to the original OEM specs to fit your vehicle.

Kit does one door only. Order two kits to do both sides.

Aftermarket Side Glass Run Channel

Sold only as a kit.

This rear window seal goes first on the glass and is installed using the rope-in method. It is a standard black gasket without trim groove. The seal is made from the original specs and from high quality ozone resistant materials. Will not work with OEM sliding windows.

This seal presses on the pinchweld lip on the body and fits either the driver or passenger doors. Made from the ozone resistant EPDM rubber and with the same OEM specs to install and fit for an authentic appearance.

Aftermarekt Quad Cab - Driver or Passenger Side Door Vertical Rear Door Seal V

Kit does one door only. Order two kits to do both sides.

Aftermarket Driver and Passenger Side  V Glass Run Channel

Molding for windshields with 3 sides and welded corners. Fits 1500/2500/3500 trucks.

QUAD & MEGA CAB 55277294AA $96.00

55277293AA $92.00

Aftermarket Hood to Cowl Seal Fits: ‘03-‘09, 2500/3500 ‘08-‘10, 4500/5500 ‘02-‘08, 1500

Aftermarket Side Glass Run Channel LJC-914-C $1.95

REG./STD. CAB 55277295AA $96.00

The glass run simply presses into the front, top & back section of the glass channel. A separate smaller run is installed inside the door in the back channel. This two-piece kit fits one side.

CS-3110-02 $9.95

DRIVER SIDE

GRK-3110-94L $32.95

PASSENGER SIDE GRK-3110-94R $32.95

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


DORMAN Door Striker (‘89-‘93) Made from durable steel. Thread size: 7/16” - 14.

DRM38442 $8.95

DORMAN Tailgate Handle (‘03-‘09) Constructed of reinforced plastic for long-lasting endurance.

DRM80165 $28.00

DORMAN Tailgate Handle Bezel (‘94-‘02) Bezel only.

DRM83200 $5.95

Tailgate Push Type Retainer Kit (‘10-‘19, 2500/3500 & ‘09-‘18, 1500) Includes 6 push type retainers.

GG-TGATECL $7.95

DORMAN Tailgate Hinge Bushing - Right Side (‘09-‘17) 1500/2500/3500

DRM38713 $8.95

MOPAR Tailgate Hinge Bushing Kit (‘03-‘09, 2500/3500 & ‘02-‘08, 1500)

GG-TGBKIT $22.95

DORMAN Tailgate Hinge Bushing Kit (‘95-‘02)

DRM38641 $8.95

DORMAN Tailgate Hinge Kit (‘03-‘09) 2500/3500 Bushings sold separately.

DRM38650 $17.50

DORMAN Tailgate Support Cables (‘03-‘18), Sold as a pair.

DRM38542 $18.95

DORMAN Tailgate Support Cable (‘94-‘02) Left or Right Sold individually.

DRM38535 $10.95 each

MOPAR License Plate Lamp Socket and Harness Assembly (‘94-‘02)

5179988AB $15.95

DORMAN License Plate Lamp Socket and Harness Assembly (‘94-‘02)

DRM645748 $11.95

DORMAN Puddle Lamps (‘10-‘18) 1500/2500/3500 Sold as a pair.

DRM926108 $41.95

MOPAR Fifth Wheel/Gooseneck Pickup Bed Plug Cover Kit (‘13-‘19) 2500/3500 Contains 4 mounting hole covers and 1 gooseneck hole cover.

NEW! 68225506AA $66.95

MOPAR Rear Bumper Step Pad (‘94-‘02, 2500/3500 & ‘94-‘01, 1500)

MOPAR Rear Bumper License Plate Bracket (‘94-‘02, 2500/3500 & ‘94-‘01, 1500)

SPLASH WHAM-O TAILGATE PROTECTOR (‘09-’20)

‘10-‘20, 2500/3500 & ‘09-‘18, 1500  GG-SPLASH10:  $79.95 + $19.95 shipping

Family Problems: What to do about Splash and Wham-o? We’re all family, right? Yet, some problems are too embarrassing to discuss. Begrudgingly, let’s talk about Splash and Wham-o. Splash was a problem the first time you opened the Fourth Generation truck’s tailgate. Water accumulated on the plastic aero-lip of the tailgate cover and you got a splash on your front side when you dropped the tailgate. Such a poopie design. Wham-o, he came along a little later, like the first time someone else dropped the tailgate onto a close-by trailer jack. Bam/thunk! Now there is a big dent in the tailgate’s horizontal edge that no one knows anything about. Such a poopie design.

Makes a great gift!

Our plastic tailgate protector corrects the problem that Splash created with a flat surface instead of the aero-lip. Our plastic tailgate protector corrects the problem that Wham-o created by wrapping (covering up) the tailgate’s horizontal edge. This is a heck of a lot cheaper than repairing a tailgate.

EXTERIOR PARTS & ACCESSORIES

REPLACEMENT PARTS

The Splash Wham-o cover is textured like the factory plastic cover. We supply new mounting clips and 3M double-sided tape to hold the cover in place. Keep yourself dry and protect (cover up) your tailgate with the Splash and Wham-o tailgate protector.

EZ Down, ‘03-‘09

LEFT: 55034461 $45.95 RIGHT: 55034460 $41.95

55076850 $64.95

EZ_DOWN:  $39.95

A sudden and uncontrolled drop of a truck tailgate is unsettling – WHAM! Free yourself from the frustration of juggling overflowing loads and properly bracing a dropping tailgate with the EZ Down tailgate damper. The EZ Down installs in minutes. All parts are included in the kit and there are no holes to drill. NOTE: The EZ Down does not help in bringing the tailgate upright to the closed position.

TRUCK BED/CARGO AREA LED LIGHT KIT - UNIVERSAL DRM87713:  $37.95

DORMAN Tail Light Circuit Strip (‘03-‘06) If the tail lights in your truck stop working, it may not be the bulbs. Over time the contacts can get weak and they will not make good contact with the bulbs. Fix the problem with this replacement tail light strip. Sold individually.

LEFT OR RIGHT SIDE DRM923030 $12.95

Catalog good through April 2020 l Prices subject to change without notice.

Add light to your truck bed or vehicle cargo area with Dorman’s Truck Bed Lighting Kit. This kit utilizes bright 5050SMD LEDs to cover your truck bed or vehicle cargo area in a brilliant white light. Everything needed to perform the installation is included.

Order 770-886-2500 or genosgarage.com 

l 57


EXTERIOR PART S & ACCESSORIES

Aluminum Fuel Doors

Manufactured by All-Sales and made in the USA. Brushed Aluminum  V

‘13-‘19  AS-6047BL - LOCKING Fuel Door:  $73.95** ‘10-‘12  AS-6042B - Fuel Door:  $70.95* ‘10-‘12  AS-6042BL - LOCKING Fuel Door:  $74.95* ‘03-‘09  AS-6041B - Fuel Door:  $79.95 ‘03-‘09  AS-6041BL - LOCKING Fuel Door:  $89.95 Polished Aluminum  V

‘13-‘19  AS-6047P - Fuel Door:  $84.95** ‘13-‘19  AS-6047PL - LOCKING Fuel Door:  $88.95** ‘10-‘12  AS-6042P - Fuel Door:  $89.95* ‘03-‘09  AS-6041P - Fuel Door:  $82.95 ‘03-‘09  AS-6041PL - LOCKING Fuel Door:  $89.95

Aluminum Green ‘DIESEL’ FUEL FILL Cap

‘13-‘18, 6.7L LT-DIESEL-CAP: $23.95 ‘14-‘18, Ram 1500 EcoDiesel LT-DIESEL-CAP1: $23.95

This billet dust cap has an external O-ring that slides into the fuel fill neck. There is a magnet recessed into the base so that you can put the fuel cap on the back side of the door when filling the tank.

Flat Black

Aluminum ‘DEF’ Filler Cap

‘94-‘12  AS-6950K - Fuel Door:  $98.95** ‘94-‘12  AS-6950KL - LOCKING Fuel Door:  $98.95**

‘13-‘20, Ram 2500/3500/4500/5500 LT-DEF-CAP:  $35.00 ‘14-‘20, Ram 1500 EcoDiesel LT-DEF-CAP1:  $35.00

Gloss Black

‘94-‘12  AS-6950GK - Fuel Door:  $98.95** ‘94-‘12  AS-6950GKL - LOCKING Fuel Door:  $98.95**

This blue anodized aluminum dust cap has DEF engraved into it and has two external O-rings that slide into the Diesel Exhaust Fluid fill neck. The cap can be attached to the original DEF cap tether.

** NOTE: Installation on ‘13-‘19 trucks is more complicated than previous models. Instructions can be found on our website. Will not work on Mega Cab dually trucks, but will work on Regular and Crew Cab dually trucks. *NOTE: ‘10-‘12 fuel doors will not work on dual rear wheel trucks.

gENO’S garage diesel fuel filler cap, ‘19-’20

2019 Coming Soon.

ALUMINUM GREEN LOCKING FUEL CAP, ‘13-‘20  V ‘19-‘20, Ram 1500/2500/3500 GG-EZ45GLC:  $70.00  SALE $59.95

‘19-‘20, Ram 2500/3500 GG-DSLFC19:  $35.00  NEW!  SALE $28.95

Includes two locking keys.

‘13-‘18, Ram 2500/3500 & ‘13-‘18, 1500 GG-EZLC1:  $65.00  SALE $54.95 Spare Locking Key GG-EZSKEY-P:  $8.75

This cap fits all Ram 2500/3500 filler necks with 3 guide bars inside the neck. Cap is magnetic so you can put it on the filler door while adding fuel so you don’t leave it behind.

MOPAR DIESEL FUEL FILLER DUST CAP, ‘19-‘20 ‘19-‘20, Ram 2500/3500 ‘19 Ram 1500 EcoDiesel - Classic 82215782:  $22.95

This dust cap helps keep the fuel filler area clean so debris does not end up in your truck’s fuel tank.

S  TANDARD ‘00-‘12 2500/3500 ‘08-’19 Cab/Chassis

LOCKING ‘00-‘12 2500/3500 ‘08-’19 Cab/Chassis

GATES_31838D: $7.95

GATES_31836D: $14.95

‘89-‘99 STANDARD

‘89-‘99 LOCKING

GATES_31615D: $7.95

GATES_31734D: $16.95

Green Fuel Caps (‘89-‘19)

The locking fuel caps are plastic with a stainless steel lock and key, the designs feature sturdy construction to meet Federal Fuel Safety Standards for fuel leakage. Locking gas caps include a quick on/off, quarter-turn, green locking gas cap and two keys. A standard fuel cap can be used with your truck’s plastic tether by drilling a 7/32” hole – then enlarging by hand to a 1/4” hole – in the top of the cap.

gENO’S garage GASOLINE fuel filler cap, ‘19-’20

‘19-‘20, Ram 1500 - Gas Engine GG-GASFC19:  $75.00  NEW!  SALE $59.95

This cap fits all gasoline engine Ram 1500 filler necks. Cap is magnetic so you can put it on the filler door while adding fuel so you don’t leave it behind.

58 l Ram Turbo Diesel Parts & Accessories  #107

In 2013 the folks at Ram introduced a new fuel fill neck. The top of the neck is non-threaded and this design made the traditional screw-in and locking fill cap obsolete. The new design is simply a flapper-on-a-spring. Ram responded to the market’s need for a fill cap by adding an 89¢ plastic plug. However, folks still wanted a locking fuel cap. This locking fuel cap is a simple design, a twist of the key lets you move the locking collar up to remove the fuel cap.

EZ-LOC ANODIZED BILLET ALUMINUM LOCKING FUEL CAP

‘08-‘20, R  am 3500/4500/5500 Cab/Chassis GG-EZCC4G:  $50.00 Spare Locking Key GG-EZSKEY-P:  $8.00

Heavy-duty anodized billet aluminum fuel cap. Each EZ-Loc comes with the EZ-Loc cap and a fully machined stainless steel Secure Key. The locking fuel cap is not designed to work with the OEM tether.

DEF-LOC ALUMINUM LOCKING ‘DEF’ CAP, ‘13-‘20 ‘19-‘20, Ram 1500/2500/3500/4500/5500 GG-EZ45GDEF:  $54.00  SALE $49.00 Includes two locking keys.

‘13-‘18, Ram 1500/2500/3500/4500/5500 GG-EZDEF1:  $49.00 Spare Locking Key Lock Tether GG-EZSKEY-P:  $8.75 GG-EZTETHER:  $6.00

The DEF-Loc is the locking/tamper-resistant DEF cap for Dodge Ram diesels. Locking up your DEF prevents unwanted matter from being put into your DEF tank. The DEF-Loc also features an EPDM U-Cup seal and also has a venting feature cut into the underside of the stainless steel Secure Screw head. Each DEF-Loc comes with the DEF-Loc cap and a fully machined stainless steel Secure Key. This DEF cap is not designed to work with OEM tether.

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


OWNERS!

Wheel Simulators

DOOR HANDLE REINFORCEMENT PLATES, ‘75-’93 STAINLESS STEEL FUEL TANK STRAPs, ‘91-’93 ND-TS8993: $80.00

Replace rusty fuel tank straps on your Dodge Ram 2500/3500 with a 30-gallon fuel tank with these direct replacement straps.

ND-DR8993: $30.00

HUSKY LINER MUD GUARDS ‘10-‘18

‘03-‘14, 3500 DRW UniLiner 17” Front & Rear ‘Under-The-Lug’ Mounting WHEEL-SLD-1703:  $289.00

Fix a known weak spot on Dodge 150/250/350 trucks with this 16 gauge stainless steel reinforcement plate. With the interior door panel removed, it installs on the inside of the door and braces the door handle.

FRONT 2500/3500  without OEM Fender Flares

PART#

FRONT 2500/3500  with OEM Fender Flares

SG-DG-58181: $42.95

FRONT 2500/3500

SG-DG-56071: $42.95

‘94-‘02

FRONT 2500/3500

SG-DG-56001: $42.95

REAR SRW  2500/3500  without OEM Fender Flares

SG-DG-57151: $42.95

REAR SRW  2500/3500  with OEM Fender Flares

SG-DG-57161: $42.95

REAR DRW  3500  without OEM Fender Flares

SG-DG-57181: $81.95

REAR DRW  3500  with OEM Fender Flares

SG-DG-57191: $96.95

‘10-‘18 ‘06-‘09 ‘03-‘09

‘94-‘02

‘94-‘98, 3500 DRW DOT Liner 16” Front & Rear ‘Over-The-Lug’ Mounting WHEEL-GD-816:  $224.00

These polished stainless steel center hubcovers complete the look of expensive aluminum wheels at a fraction of the cost. A protective rolled edge gives them strength and safety. Secure bolt-on installation means you won’t lose them because of a bump in the road.

SG-DG-58171: $42.95

‘03-‘09

‘10-‘18

‘99-‘02, 3500 DRW DOT Liner 16” Front & Rear ‘Over-The-Lug’ Mounting WHEEL-ND-20:  $315.00

REAR DRW  3500  MEGA CAB without OEM Fender Flares

SG-DG-57121: $81.95

REAR SRW  2500/3500  without OEM Fender Flares

SG-DG-57061: $42.95

REAR DRW  3500  REGULAR/QUAD CAB without OEM Fender Flares

SG-DG-57071: $81.95

REAR SRW  2500

SG-DG-56001: $42.95

REAR DRW  3500

SG-DG-57051: $81.95

FRONT & REAR Mud Guards (‘94-‘18) 2500/3500

EXTERIOR PART S & ACCESSORIES

FIRST GEN

NOTE: These Husky Liner mud guards (Front and Rear) are custom-molded to fit the contour of the truck’s wheel well. They are pre-drilled and the holes line up with existing factory screw/trim hole locations. However, they do not extend as far below the bodywork as the Mopar splash guards.

MOPAR SPLASH GUARDS

!‘19

‘10-‘18

‘10-‘18

‘19

‘10-‘18

PART#

FRONT 2500/3500 with OEM Fender Flares  (HEAVY-DUTY RUBBER)

SG-DG-82215928AB: $65.00/pair

FRONT 2500/3500 without OEM Fender Flares  (HEAVY-DUTY RUBBER)

SG-DG-82215930AB: $65.00/pair

FRONT 1500 (not Classic) with OEM Fender Flares  (DELUXE MOLDED PLASTIC)

SG-DG-82215488AB: 55.00/pair

FRONT 1500 (not Classic) without OEM Fender Flares  (DELUXE MOLDED PLASTIC)

SG-DG-82215487AB: $55.00/pair

FRONT 2500/3500 with OEM Fender Flares  (DELUXE MOLDED PLASTIC) FRONT 2500/3500 without OEM Fender Flares  (DELUXE MOLDED PLASTIC)

SG-DG-82214137: $45.95/pair SG-DG-82212287AC: $54.95/pair

FRONT 2500/3500 with OEM Fender Flares  (HEAVY-DUTY RUBBER)

SG-DG-82215779AB: $67.00/pair

FRONT 2500/3500 without OEM Fender Flares  (HEAVY-DUTY RUBBER)

SG-DG-82215776AB: $64.95/pair

REAR SRW  2500/3500 with OEM Fender Flares  (HEAVY-DUTY RUBBER)

SG-DG-82215929AB: 65.00/pair

REAR SRW  2500/3500 without OEM Fender Flares  (HEAVY-DUTY RUBBER)

SG-DG-82215931AB: $65.00/pair

REAR DRW  2500/3500 with OEM Fender Flares  (HEAVY-DUTY RUBBER)

SG-DG-82215933AB: $77.00/pair

REAR DRW  2500/3500 without OEM Fender Flares  (HEAVY-DUTY RUBBER)

SG-DG-82215932AB: $77.00/pair

REAR SRW  1500 (not Classic) with OEM Fender Flares  (DELUXE MOLDED PLASTIC)

SG-DG-82215489AB: $55.00/pair

REAR SRW  1500 (not Classic) without OEM Fender Flares  (DELUXE MOLDED PLASTIC)

SG-DG-82215490AB: $55.00/pair

REAR SRW  2500/3500 with OEM Fender Flares  (DELUXE MOLDED PLASTIC)

SG-DG-82214136: $45.95/pair

REAR SRW  2500/3500 without OEM Fender Flares  (DELUXE MOLDED PLASTIC)

SG-DG-82211228: $63.95/pair

REAR SRW  2500/3500 with OEM Fender Flares  (HEAVY-DUTY RUBBER)

SG-DG-82215778AB: $65.95/pair

REAR SRW  2500/3500 without OEM Fender Flares  (HEAVY-DUTY RUBBER)

SG-DG-82215780AB: $54.95/pair

‘10-‘18

REAR DRW  3500 with or without OEM Fender Flares  (HEAVY-DUTY RUBBER)

SG-DG-82215777AB: $60.95/pair

‘03-‘09

REAR SRW  2500/3500  (DELUXE MOLDED PLASTIC)

Catalog good through April 2020 l Prices subject to change without notice.

FRONT Heavy-Duty Rubber (‘10-‘18) 2500/3500

REAR Deluxe Molded Plastic (‘10-‘18) 2500/3500

EZ Install

SG-DG-82207241: $49.95/pair

Order 770-886-2500 or genosgarage.com 

l 59


EXTERIOR PARTS & ACCESSORIES - STEPS

F RE E

SHIPPING!

HEAVY-DUTY ‘SCRUBBLADE’ WINDSHIELD WIPERS

All PowerSteps ship with light kit.

PowerStep RUNNING BOARDS 

I

V

‘18-‘19, 2500/3500 - Plug-n-Play Model AMP-76239-01A:  $1,499.00 ‘18, 1500 & ‘19 1500 Classic- Plug-n-Play Model

All Cabs - Regular, Quad, Crew, Mega (OEM Air Ride suspension requires Air Tank Relocation Kit below.)

‘16-‘17, 2500/3500 - Plug-n-Play Model

AMP-76139-01A:  $1,499.00

‘10-‘15, 2500/3500 and ‘09-‘15, 1500

AMP-75138-01A:  $1,399.00

‘03-‘09, 2500/3500 and ‘02-‘08, 1500

AMP-75101-01:  $1,399.00

‘06-‘09, 2500/3500 and ‘06-‘08, 1500

AMP-75118-01:  $1,399.00

Plug-n-Play Conversion Kit (‘13-‘18) Factory Air Ride Air Tank Relocation Kit

AMP-76402-01A:  $175.00 AMP-10-79101-01A:  $33.00

Factory Air Ride Air Tank Relocation Kit

AMP-10-79102-01A:  $62.00

Plug-n-Play Pass Through Harness Kit

AMP-76404-01A:  $85.00

All Cabs - Regular, Quad, Crew, Mega All Cabs - Regular, Quad, Crew, Mega Quad Cab

Mega Cab

2500/3500 Crew Cab (Compatible only with 76239-01A, 76139-01A and 75138-01A)

2500/3500 Mega Cab (Compatible only with 76239-01A, 76139-01A and 75138-01A)

Allows you to have an open OBDII port when AMP PowerStep is installed with the Plug-n-Play Kit (Freddy Frugal: see Auto Meter adapter on page 39.)

Dodge Quad Cab and Mega Cab owners have to look no further than the AMP Research PowerStep for a great accessory. Two Turbo Diesel Register writers installed and reviewed these steps. Based on their favorable comments, we ordered and installed the AMP PowerStep Kit, and we agree. These steps are outstanding. There are no holes to drill as the kit utilizes existing holes in the body. The factory instructions are thorough, and the installation was not difficult. We even have a video at our website that shows you how to install the steps. The fit and finish are flawless. 600 lbs. capacity.

22” BLADE ‘10-‘20, 2500/3500 ‘11-‘20, Chassis/Cab ‘09-‘19, 1500 Classic SB2200: $16.95 Single / $30.00 Pair

20” BLADE ‘94-‘02, 2500/3500 ‘94-‘01, 1500 SB2000: $16.95 Single / $30.00 Pair

24” BLADE ‘19-‘20, 1500 ‘03-‘09, 2500/3500 ‘03-‘10, Chassis/Cab ‘02-‘08, 1500 SB2400: $16.95 Single / $30.00 Pair

18” BLADE ‘89-‘93, 150/250/350 SB1800: $16.95 Single / $30.00 Pair

We’re always on the lookout for products that represent the best value for your money. At the 2017 SEMA Show we discovered the Scrubblade. We asked, “A rubber wiper blade is a rubber wiper blade, right?” As it turns out (a long story), rubber compounds greatly differ and you get what you pay for. With a closer look we noticed the Scrubblade’s dual blades, the patented scrub pattern and scrub “nibs.” These are three features that make these wiper blades worthy of your attention. Finally, the Scrubblade is competitively priced. So: premium rubber + great design + good price = best value.

‘13-‘18, “Cummins C” Chrome Emblem

‘15-‘18, “Cummins C” Black Emblem

OEM emblem.

OEM emblem.

68149701: $66.50

68276962: $39.95

Form: The AMP Research design tucks up and under the truck’s side pinch rail. In the up position, they are out of sight, leaving your truck with a clean, uncluttered look. Function: In the down position (eight-inch drop), you can’t beat the fulllength step board for ease-of-entry/exit access to your truck. NOTE: Additional shipping charges apply to steps shipping to Alaska and Hawaii.

Ram 1500 EcoDiesel Emblem ‘14-‘18, 1500 & ‘19 Classic  68164914AA: $38.95

OEM replacement emblem.

“RAM 3500” 24V Emblem

“RAM 3500” 12V Emblem

OEM emblem for ‘98.5-‘02 24-valve trucks.

OEM emblem for ‘94-‘98 12-valve trucks.

“RAM 2500” 24V Emblem

“RAM 2500” 12V Emblem

OEM emblem.

OEM emblem.

55295314AC: $61.95

Made in USA. Bed Step™

‘10-‘19, 2500/3500 AMP-75306-01: $240.00 ‘09-‘18, 1500 & ‘19 1500 Classic Standard Exhaust AMP-75306-01: $240.00 ‘09-‘18, 1500 Dual Exhaust AMP-75310-01: $260.00 ‘03-‘09, 2500/3500 AMP-75304-01: $240.00 ‘02-‘08, 1500 AMP-75304-01: $240.00

The AMP Research Bed Step gives easy access to pickup beds even with the tailgate down. It is made from high-strength aluminum alloy with a durable powdercoat finish to provide long-term durability. Rugged stepping platform supports up to 300 pounds of weight. Designed with a spring-loaded cam, the Bedstep stows away and deploys with a flip of the foot. Easy five-minute bolt-on installation. NOTE: Bed Step attaches to stock bumper only. Will not work with aftermarket bumpers.

60 l Ram Turbo Diesel Parts & Accessories  #107

‘98.5-‘02, 24V 55295313AC: $56.95

Grille emblem

55295314AB: $61.95

‘94-‘98, 12V 55295313AB: $62.95

Grille emblem

‘10-‘12, 2500/3500 ‘09-‘12, 1500 68050754AA: $56.95

‘10, 3500 Chassis Cab ‘03-‘09, 2500/3500 ‘03-‘08, 4500/5500 68139834AA: $52.95

OEM emblem. Measures 110mm wide.

OEM emblem. Measures 76mm wide.

Grille emblem

Grille emblem

MOPAR OEM emblem. Measures 61mm wide.

OEM emblem.

‘03-‘05, 1500/2500/3500 5073290AB: $51.95

‘94-‘02, 2500/3500 ‘94-‘01, 1500 55295240: $47.95

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


(up to 6” drop) COMPLETE HITCHES

Ram 2500/3500 Air Bag Kit

2-1/2” Receiver Hitch 3405-25 with Greaseless Alumiball Combo Ball (10,000/12,500 lb. GTWR; 1,500 lb. tongue) RAPIDHITCH-3405-25: $229.99 2-1/2” Receiver Hitch with Plated Steel Combo Ball (10,000/12,500 lb. GTWR; 1,500 lb. tongue) RAPIDHITCH-3410-25: $209.99

RAM 2500/3500 Air Bag Kits 2” Receiver Hitch with Greaseless Alumiball Combo Ball (6,000/8,000 lb. GTWR; 1,500 lb. tongue) RAPIDHITCH-3405: $199.99 2” Receiver Hitch with Plated Steel Combo Ball (8,000/10,000 lb. GTWR; 1,500 lb. tongue) RAPIDHITCH-3410: $179.99

3410

‘14-‘20, 2500 (2WD/4WD) HP10206:  $370.67

‘14-‘20, 3500 (4WD) ‘03-‘13, 2500/3500 (4WD) HP10002:  $370.67

‘14-‘18, 3500 (2WD) ‘03-‘13, 2500/3500 (2WD) HP10089:  $347.50

‘89-‘02, 2500/3500 (2WD/4WD) HP10019:  $370.67

TOWING ACCESSORIES

‘Rapid Hitch’ Towing Hitch

AXLE BREATHER RELOCATION KIT ‘07-‘09, RAM 3500 (Cab/Chassis) HP10136:  $14.75

The Rapid Hitch tow bar system is the perfect hitch for anyone who tows multiple trailers. You can flip the double ball over, change the drop to a rise, or adjust the height of the drop all by simply removing the hitch pin and putting it back in place. With the easy height adjustment you can make sure you are keeping your trailer level. With the 2” and 2-5/16” ball combo, you cover most trailers on the road today. The 1-7/8” ball is available individually if desired. The various balls are easily changed by removing a hidden pin which attaches the ball to the ball housing. The Rapid Hitch is made of an aluminum super alloy that will NEVER RUST! The aluminum Alumiball Combo Ball option is light and surprisingly strong. It only weighs 15 lbs. with the greaseless ball option making it easy to handle and adjust.

AIRBAG IN-CAB CONTROL KIT FOR AIRBAG KITS Kit includes paddle switches, mechanical air pressure gauge, 12 VDC air compressor, wiring harness and install hardware. HP10098:  $347.50

Pacbrake’s air springs allow you to level out your truck’s stance for any towing/ hauling situation. The product’s design gives you the ability to adjust the amount of air in each spring. The standard manual fill kit gives you easily accessible fill valves located near the rear license plate on your truck. It is important to note that by installing an air suspension kit, the max load capacity (GVWR) does not increase. NOTE: Even though we have rarely seen this, some vehicles equipped with 5th wheel hitches require brackets to be mounted to the frame in the same locations as the air spring brackets (if this is the case, modifications of the 5th wheel hitch brackets may be required to mount this kit).

If you choose the Plated Steel Combo Ball, it is V5 certified with a strength rating of 10,000 lbs. and 1,500 tongue weight with the 2-5/16” steel ball.

BALL ASSEMBLY ONLY 1-7/8” Greaseless Single AlumiBall (3,500 lbs. towing capacity) RAPIDHITCH-3452:  $39.99 2” × 2-5/16” Combo Ball (Plated) (8,000- 10,500 lbs. towing capacity) RAPIDHITCH-3424:  $49.99

Trailer-Aid® PLUS TRAILER-AID:  $49.00

Trailer-Aid PLUS allows you to change a tandem axle trailer flat without the inconvenience of jacking up the trailer. Simply drive the good tire/wheel onto the Trailer-Aid and the height of the axle will be sufficient to change the bad tire. 2-PIN LOCK KIT Locking Ball Pin Kit (1 for adjuster; 1 for receiver) RAPIDHITCH-3492:  $37.99

Catalog good through April 2020 l Prices subject to change without notice.

7-Spade RV Connector Maintenance Kit IPA-8028:  $40.95

The IPA-8028 kit cleans both the male and female sides of the 7-spade harness. The kit’s circuit tester has LED lights that show that the connection at the pin is good, giving you confidence to troubleshoot wiring or light bulbs on the trailer.

Order 770-886-2500 or genosgarage.com 

l 61


TOWING & REPLACEMENT MIRRORS

STOCK REPLACEMENT SIDE VIEW MIRRORS

Towing Mirror Glass, ‘10-‘19 ‘10-‘19 CONVEX GLASS ‘10-‘18 BLACK or CHROME • Power • Heated ‘10-‘18 BLACK or CHROME • Manual • non-Heated

APPLICATION

DRIVER 68067731AA

$30.95

LEFT KVDG42L

PASSENGER 68067730AA

Manual

$30.95

$61.95

RIGHT KVDG42R

$61.95

DRIVER 68067727AA

$30.95

PASSENGER 68067726AA

$22.95

‘08-‘10

DRIVER 68067729AA

$37.95

PASSENGER 68067728AA

$22.95

Check mounting on back of mirror glass before ordering. Call or compare online.

‘15-‘18 BLACK or CHROME • Power • Heated

PART#

4500/5500

$28.95

PASSENGER 68286844AA

• Heated

1500

$78.95

RIGHT KVDG42ER

$82.95

‘03-‘09

2500/3500

‘02-‘08

DRIVER 68286843AA

Electric

LEFT KVDG42EL

Manual Towing

LEFT KVDG44L

$120.95

RIGHT KVDG44R

$120.95

$28.95

Check mounting on back of mirror glass before ordering. Call or compare online.

Electric Towing

• Heated

Towing Mirror Signal Lights, ‘10-‘19

LEFT KVDG44EL

$159.95

RIGHT KVDG44ER

$159.95

The turn signal in the outside mirror has been revised. Please make sure it is visually matches the opposite mirror. if not, both sides will need to be replaced.

LEFT KVDG33L

Manual

$55.95

RIGHT KVDG33R

$55.95

DRIVER 68302829AA: $88.00

‘98-‘02

PASSENGER 68302828AA: $88.00

2500/3500

‘98-‘01

Aftermarket Mirror Glass Assemblies

• Heated NOTE: Mirror support brackets included.

‘07-‘09, SPORT • Manual

‘05-‘09, SPORT • Heated ‘05-‘09, TOWING • Heated NOTE: Attaches with 3 metal prongs.

‘05-‘09, TOWING • Manual NOTE: Attaches with 3 metal prongs.

‘03-‘06, SPORT • Non-Heated ‘03-‘05, TOWING • Heated NOTE: Attaches with round spring band.

‘03-‘04, SPORT • Heated

$10.95

RIGHT DRM56270

$23.95

LEFT DRM56324

RIGHT DRM56323

LEFT DRM56276

RIGHT DRM56277

$37.95

$58.95

LEFT DRM56242

$49.95

$31.95

$49.95

LEFT DRM56272

RIGHT DRM56273

LEFT DRM56274

RIGHT DRM56275

$32.95

‘94-‘01

NOTE: Mirror support brackets included.

1500

Manual

• Chrome

‘94-‘97

2500/3500 1500

Electric

• Chrome

LEFT DRM56216

$59.95

‘98-‘02, SPORT • Non-Heated

LEFT DRM56256

$26.95

62 l Ram Turbo Diesel Parts & Accessories  #107

$24.95

$24.95

RIGHT DRM56257

$32.95

$146.95

RIGHT KVDG49ER

$146.95

LEFT KVDG49L

$143.95

RIGHT KVDG49R

$143.95

LEFT KVDG13L

$56.95

RIGHT KVDG13R LEFT KVDG30EL

$58.95

RIGHT KVDG30ER

Electric Towing

LEFT KVDG66EL

Mirror support brackets included.

RIGHT KVDG66ER

$176.95 $176.95

LEFT KVDG68L

$34.95

RIGHT DRM56217

LEFT KVDG49EL

$58.95

$31.95

Manual

• Chrome

‘98-‘02, SPORT • Heated

RIGHT KVDG33ER

$56.95

RIGHT DRM56243

RIGHT DRM56241

$59.95

Manual Towing

$58.95

LEFT DRM56240

$23.95

‘94-‘02

2500/3500

$79.95

$59.95

Electric Towing

PART# LEFT DRM56271

• Heated

1500

*Check the back of the mirror for mount type before ordering. Glass fits OEM mirrors only.* APPLICATION

Electric

LEFT KVDG33EL

$116.95

RIGHT KVDG68R

$122.95

‘89-‘93

350/250/150 Electric

• Chrome

LEFT KVDG69EL

$130.95

RIGHT KVDG69ER

$137.95

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


‘10-‘12, 2500/3500 ‘09-‘12, 1500 Single Headlight

‘12-‘18, 2500/3500 For trucks built after 7/23/12.

‘13-‘18, 1500 Quad Headlights ‘19, 1500 Classic

‘10-‘12, 2500/3500 For trucks built up to 7/23/12.

‘09-‘12, 1500 Quad Headlights

LEFT 55277409AF $235.00 RIGHT 55277410AF $235.00 LEFT 68096439AG $235.00 RIGHT 68096438AG $235.00 LEFT 68001485AH $235.00 RIGHT 68001484AH $242.00

Brite Box  The Brite Box module plugs right into your Dodge Ram’s existing wiring harness and allows simultaneous operation of the high and low beams without placing any additional loads on the vehicle’s stock headlight switches or wiring. The Brite Box goes in-series to your existing wiring harness. Unplug the harness from the light (passenger side light is easiest to access) and plug it into the Brite Box. Take the pigtail plug from Brite Box and plug into the light. For those truck owners who want the high beams, low beams AND fog lights to be illuminated, you will need to purchase the Brite Box model for your truck that has Fog Light Control (FLC). Fogster  As you know, the lighting system will turn the fog lights off when the high beams are activated. The FOGSTER will keep the fog lights illuminated with the high beams on. Fogster-SD8 works with ‘06-‘09 trucks with factory fog lights; Fogster-SD7 works with ‘03-‘05 trucks. NOTE: This is a single unit.

DEPO REPLACEMENT HEADLIGHTS ‘13-‘18, 1500/2500/3500 Halogen Projector w/Chrome Projector Ring Will only work with factory installed projectors.

‘13-‘18, 1500/2500/3500 Halogen Projector w/Black Bezel and Chrome Projector Ring Will only work with factory installed projectors.

‘07-‘09, 2500/3500

‘06, 2500/3500

‘03-‘05, 2500/3500

‘99-‘02, 2500/3500 w/Sport Package *W  ill not work on non-Sport trucks without the purchase of Brite Box ‘Sport’ headlight conversion for either ‘94-‘98 or ‘99-‘02 trucks.

‘94-‘02, 2500/3500 Single bulb

‘89-‘93, 2500/3500

LEFT REPD-100168 $385.00 RIGHT REPD-100167 $385.00 LEFT DEP-3341137L-AS2 $275.00 RIGHT DEP-3341137R-AS2 $275.00

Bulbzilla  Allows you to upgrade to a 9005 light bulb (1700 lumens each) in the fog lamp socket that is sized for a 9006 (1000 lumens each) bulb and increase light output by 70%.

‘94-‘02 “Sport” Headlight Conversion  H TDR77, p106-107 Second Generation truck owners have read about converting the stock single bulb (high and low filament) to a dual bulb “Sport” arrangement that Dodge offered in Sport models from ‘99-‘02. TDR 77, pages 106-107 has the details on the conversion. For wiring purposes you need a Brite Box “Sport” Headlight Conversion and the headlights from DEPO (‘99-‘02 with Sport Package). The Brite Box Headlight Conversion converts the stock ‘94-‘02 single bulb headlight to the ‘99-‘02 Sport two bulb headlight. APPLICATION

PART#

Brite Box (‘06-‘09)

BB-SDK8: $209.99

Brite Box (‘06-‘09)

BB-SDK8-FLC-6: $249.99

RIGHT DEP-3341122R $85.00

Brite Box (‘03-‘05)

BB-SDK7: $209.99

Brite Box (‘03-‘05)

BB-SDK7-FLC-6: $249.99

LEFT DEP-3341115L $95.00

Brite Box (‘99-‘02)

BB-7B: $94.99

RIGHT DEP-3341115R $95.00

Brite Box (‘99-‘02)

with Sport Package and Fog Light Control

BB-7B-FLC-U: $119.99

Brite Box (‘99-‘02) without Sport Package

BB-4B: $94.99

LEFT DEP-3341108L $115.00

Brite Box (‘99-‘02)

BB-4B-FLC-U: $119.99

RIGHT DEP-3341108R $115.00

Brite Box (‘94-‘98)

BB-4: $94.99

Brite Box (‘94-‘98)

BB-4-FLC-U: $119.99

Brite Box (‘89-‘93)

BB-4L: $94.99

Brite Box (‘89-‘93) with Fog Light Control

BB-4L-FLC-U: $119.99

Fogster (‘06-‘09)

BB-FOG-SD8-6: $109.99

LEFT DEP-3331104L $85.00

Fogster (‘03-‘05)

BB-FOG-SD7-6: $109.99

RIGHT DEP-3331104R $85.00

without Fog Light Control

LEFT DEP-3341122L $85.00

LEFT DEP-3341102L $105.00 RIGHT DEP-3341102R $105.00

LEFT or RIGHT DEP-PH105 $35.95

with Fog Light Control

with Fog Light Control with Sport Package

without Sport Package and with Fog Light Control

with Fog Light Control

Brite Box ‘Sport’ Headlight Conversion Read about the headlight conversion in our ‘Tech Information’: genosgarage.com/downloads/TechPDF/TDR77_HeadlightConversion.pdf

Brite Box ‘Sport’ Headlight Conversion with Fog Light Control

‘94-‘98

BB-4274: $149.99

‘99-‘02

BB-4274B: $149.99

‘94-‘98

BB-4274-FLC-U: $178.99

‘99-‘02

BB-4274B-FLC-U: $178.99

Bulbzilla (‘03-‘09)

Catalog good through April 2020 l Prices subject to change without notice.

HEADLIGHTS • TAIL LIGHTS • FOG LIGHTS

MOPAR OEM REPLACEMENT HEADLIGHTS

BB-BFH-6-5: $20.99

Order 770-886-2500 or genosgarage.com 

l 63


HEADLIGHTS • TAIL LIGHTS • FOG LIGHTS

DEPO REPLACEMENT FOG LIGHTS

REPLACEMENT TAIL LIGHTS

‘13-‘18, 1500 ‘19, 1500 Classic

LEFT DEP-3342020L: $39.95 RIGHT DEP-3342020R: $39.95

‘10-‘18, 2500/3500

LEFT DEP-3342015L: $29.95 RIGHT DEP-3342015R: $29.95

‘03-‘09, 2500/3500

LEFT DEP-3342009L: $44.00 RIGHT DEP-3342009R: $44.00

‘99-‘02, 2500/3500 w/o Sport Package

‘99-‘02, 2500/3500 w/Sport Package

‘94-‘98, 2500/3500

LEFT DEP-3342011L: $28.00 RIGHT DEP-3342011R: $28.00 LEFT or RIGHT DEP-3342010: $46.00 LEFT DEP-3342005L: $28.00 RIGHT DEP-3342005R: $28.00

MOPAR OEM REPLACEMENT CAB LIGHT LENSES MOPAR ‘10-‘18 MOPAR ‘03-‘09

Replacement plastic lense nuts included with purchase.

PLASTIC LENSE NUT, ‘03-‘09 Cab light lense 55077559AD for ‘03-‘09 trucks is the new updated style lamp with updated lense and gasket. You will need two of these plastic nuts per lense when replacing an older style lense with a foam gasket. Some trucks built after May 2006 may already have the updated lenses and plastic nuts.

68261677 $14.95

Bulb included.

LEFT DEP-3331902L: $36.00 RIGHT DEP-3331902R: $36.00

MOPAR ‘03-‘06, 3500 DRW With 8 ft. bed. Lense only.

5086509AA: $119.95

RED 68042140AA: $35.26 AMBER 68042143AA: $35.89 LEFT or RIGHT DRM68204: $34.95 RED 55077458AA: $44.95 AMBER 55077459AA: $44.95 RED 55054956: $55.95 AMBER 55054958: $57.95

DEPO ‘89-‘93

LEFT or RIGHT DEP-3341401N: $6.00

64 l Ram Turbo Diesel Parts & Accessories  #107

DEPO ‘89-‘93, 2500/3500

5072594: $128.95

LEFT DEP-3331605L: $19.00 RIGHT DEP-3331605R: $19.00

Side Marker Assembly

LEFT DEP-3331909L: $49.95 RIGHT DEP-3331909R: $49.95

MOPAR ‘03-‘09, 2500/3500

DEPO ‘91-‘93

Turn Signal/Parking Light Assembly

DEPO ‘94-‘02, 2500/3500 w/Black Frame

DRM923025: $39.95

REPLACEMENT SIDE MARKERS & TURN SIGNALS

MOPAR ‘94-‘02, 3500 DRW Fender Clearance Lamp

See page 57 for ‘03-‘06 replacement tail light circuit strip.

DORMAN ‘06-‘16, 3500 DRW Complete lamp assembly. Includes bulbs.

3738011 $14.50

Bulb included.

LEFT DEP-3341906L: $39.00 RIGHT DEP-3341906R: $39.00

55277299AB: $47.95

MOPAR ‘89-‘93

MOPAR ‘03-‘09, 3500 DRW Fender Clearance Lamp

DEPO ‘03-‘06, 2500/3500

MOPAR ‘06-‘16, 3500 DRW Complete lamp assembly. Includes bulbs.

55054894 $25.95

Bulb not included.

LEFT DEP-3341916L: $33.00 RIGHT DEP-3341916R: $33.00

J4000141 $1.00 each

MOPAR ‘94-‘98

DORMAN ‘03-‘09, 3500 DRW Red Fender Clearance Lamp

DEPO ‘07-‘09, 2500/3500

REPLACEMENT TAILGATE LAMPS

55077067 $33.95

Bulb included.

LEFT 55277415AE: $72.00 RIGHT 55277414AF: $72.95

55077559 $19.95

MOPAR ‘99-‘02

MOPAR ‘Fender Clearance Lamp 10-‘18, 3500 DRW Fender Clearance Lamp

MOPAR ‘10-‘18, 2500/3500 ‘09-‘18, 1500 ‘19, 1500 Classic Non-LED lights.

MOPAR ‘94-‘02, 2500/3500

MOPAR ‘94-‘02, 2500/3500 Frame only.

MOPAR (‘94-‘02, 2500/3500) For tailgate lampbar. Will also fit ‘94-‘02 Dually fender.

Roof Mounted without Cargo Light

55077262AB: $96.95 Tailgate Lampbar 55054823: $41.95

55054819: $21.95

REPLACEMENT LICENSE PLATE LIGHTS DORMAN License Plate Light Assembly (‘11-‘15) Does not include light bulb. MOPAR License Plate Light Assembly (‘03-‘09) Includes light bulb and mounting clip.

DORMAN License Plate Lense (‘94-‘02)

RIGHT DRM68143: $38.95 LEFT DRM68142: $38.95

RIGHT 55078094AE: $53.95 LEFT 55078095AE: $54.95

DRM68164: $10.95

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


Owner’s Manuals (‘89-‘05)

If the Owner’s Manual for your Dodge Ram Turbo Diesel truck is missing or has seen better days, you can affordably replace it with these new manuals. YEAR & APPLICATION

PART#

SERVICE & OWNER’S MANUALS

RAM TRUCK

Factory Service Manuals

One of our best selling items is the Haynes Repair Manual for the Dodge Ram pickups. The staff likens this manual to the “Cliff Notes” used by students in lieu of reading the entire book. However, there are times when you need the detail of the Dodge Factory Service Manual (yes, the same one you can order out of the back of your Owner’s Manual). The factory service manual CD is the authoritative source for specifications, reuse, wiring, and diagnostics. Every Dodge Turbo Diesel owner who does their own maintenance should have the factory manual. YEAR / PN

PRINT

CD

Haynes Repair Manuals These manuals cover the 5.9L and 6.7L engines.

Written for the Do-It-Yourselfer, good enough for the pros! These Haynes manuals cover Dodge pickups (2WD, 4WD, 1500, 2500, 3500) from ‘94-‘16 including the Turbo Diesel. The books are soft bound and available at one-fifth the cost of the factory manual. Everyone should own one for quick and easy reference. Does not cover Ram 1500 EcoDiesel trucks.

*For service manuals for trucks newer than the ‘05 year model, there is only one source: www.techauthority.com

Catalog good through April 2020 l Prices subject to change without notice.

‘09-‘16, 2500 & 3500 ‘09-‘16, 1500 BOOK-30043:  $24.95

‘94-‘08, 2500 & 3500 ‘94-‘08, 1500 BOOK-30042A:  $24.95

Order 770-886-2500 or genosgarage.com 

l 65


SPECIALTY TOOL BIN

Plug-All Vacuum & Fuel Stoppers  An assortment of plugs and caps. Plugs fit 1/8”, 3/16”, 1/4”, 5/16”, 3/8” and 1/2” hoses. Tapered caps close tubes from 1/8” to 1/2”.

1-1/2” Needle Nose Grease Gun Adapter  Used for greasing the front axle Cardan Joint at the transfer case.

Throttle Pedal Depressor  Perfect for cold weather truck warm-up, the tool holds throttle at a constant rpm. Engage the nylon hook under the steering wheel. Then extend the depressor rod to the accelerator pedal. Use the adjustment screw to fine-tune the rpm level. Tool is 40” in overall length.

“Handy Hooker” Circuit Tester Hook Tool  Have you pricked your finger with one of those electrical probe tools? How about grounding out the wire you were testing? The spring loaded hook pulls the wire into the sharp probe. Perfect for hard-to-reach locations. No more pricked fingers.

NPT Tap Kit  This NPT Tap Kit includes a 5/16” drill bit and a 1/8 NPT tap.

Micro-V Heavy Duty Strap Wrench  Originally developed to grasp and hold automotive belt driven pulleys such as fan clutch pulleys, but will also help hold other items as well. Made with a heavy duty aluminum handle and highly durable composite locking head. Strong nylon belt.

WIF Sensor Wrench (‘13-‘18, 6.7L)  For use when replacing the fuel filter or when servicing the water sensor. The plastic sensor has a new hex design that is easily damaged by tools, like pliers, that do not specifically fit the sensor.

Dogbone Fuel Filter Cap Combo Wrench & WIF Sensor Wrench (‘13-‘18, 6.7L)  As the description reads, this nifty tool is a “2fer.” The curved end gives you extra leverage and clearance on the hard-to-reach fuel filter cap. The straight end fits over the WIF sensor on the chassis-mounted fuel filter.

68RFE Transmission Filter Removal Tool, 65mm  While this tool was developed for another application, we found that it is perfect for removing the spin-on transmission filter #5179267AD in the 68RFE transmission.

Billet Aluminum Oil Filter Removal Tool (‘89-‘20, 5.9L & 6.7L)  Use this tool to remove the oil filter on Ram Cummins Turbo Diesel trucks. Use a 19mm/3/4” socket or wrench. Fits 93mm filters with 15 flutes (LF3972 and LF16035).

Billet Aluminum Oil Filter Removal Tool/Plug (‘13-‘20, 6.7L)  Screw this tool into the top of the oil filter to keep oil from spilling when removing the filter through the fender well.

End Cap Oil Filter Wrench  Cup design allows easy filter removal and installation from the end of LF16035 and LF3972 oil filters, even in tight locations. Use with 3/8” square drive. Important: match fluted end of the oil filter with the filter wrench to ensure you have the proper wrench size.  (NOTE: Ratchet is not included.)

THX312

$12.95

KTI73903

$5.95

LC48700

$24.95

LC25600

$13.50

GG-TAPKIT

$6.00

GATES-910131

$34.95

LC34900

$6.95

GG-DB1

$14.95

LC61600

$6.95

LT-93MM-SOCKET

$59.95

LT-OFC-TOOL

$29.95

LC61580

$6.95

‘Big Range’ Oil Filter Strap Wrench  Adjusts quickly to remove spin-on oil or fuel filters up to 6” in diameter. Use with 1/2” or 3/4” wrench. Strong nylon belt.

LC63500

Oil Filter Plug (‘13-‘20)  Used to plug the oil filter when changing oil on ‘13-‘19 Ram Cummins 2500/3500 Heavy Duty trucks. Threads into the filter for a secure seal so the filter can be removed or installed without spilling oil.

LC57180

66 l Ram Turbo Diesel Parts & Accessories  #107

$8.95

$10.95

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


LC13320

$6.95

Ram 1500 EcoDiesel Fuel Filter Removal Tool (‘14-‘18, 3.0L)  The wrench fits snugly on the bottom of the fuel filter canister and grabs the four tabs on the outside of it. The drain valve is installed after the first filter removal and drains all of the fuel so you won’t have fuel running down your arm when you take the canister down.

BE ST SE LLE R!

Ram 1500 EcoDiesel C3M Fuel Filter Removal Tool (‘14-‘18, 3.0L)  Similar to our American-made, billet aluminum tool (LT-ECO-FUEL-TOOL). This tool is made from our proprietary process, C 3M (cheap Chinese cast metal). All joking aside, it is inexpensive, but it works. It even has a sporty/fast/sleek/racy orange color. 28mm Nut Grabber (‘10-‘20, 6.7L & 2020 1500 EcoDiesel Fuel Filter)  Are you tired of busted nuts? Try our new no-slip 28mm fuel filter cap socket which has no slop in the socket-to-plastic raised hex. 3/8” drive, 6-point socket. Black hard-annodized for durabililty. Made in the U.S.A. Fuel Filter Socket - Low Profile, 28mm (‘10-‘20, 6.7L & 1500 EcoDiesel)  Helps remove and install the fuel filter canister on ‘10-18, 6.7L Cummins engines. Use the low profile, 3/8” drive, 28mm socket on the raised hex on the fuel filter housing.

LT-ECO-FUEL-TOOL

$59.95

CLOSEOUT! C3M-ECO-FUEL-TOOL

$17.95

GG-SOCKET28

$15.95

LC13290

$6.95

Fuel Filter Socket, 29mm (‘00-‘07, 5.9L)  Helps remove and install fuel filters on ‘00-‘07, 5.9L Cummins engines. Use the low profile, 3/8” drive, 29mm socket on the raised hex on the fuel filter housing.

LC14600

DEF Tester  Had a bottle of Diesel Exhaust Fluid sitting around for awhile? Nervous about putting it in your truck’s DEF tank? Check it first with this handy DEF tester.

THX108 $19.50

Threaded Super Funnel  Perfect for hands-free filling on threaded valve cover openings. This two-piece funnel can be used separately or threaded together for a long super funnel. The larger section screws into threaded oil filler openings found on many Dodge Ram trucks, holding the funnel upright for quick, mess free oil fills.

LC19802 $5.95

Jay’s EZ Funnel  This multi-use funnel is perfect for all applications. Replace the lubricant cap with Jay’s EZ Funnel. Dispense the liquid using only Jay’s EZ Funnel or attach the flex tubing for hard to reach places. Place Jay’s EZ Funnel into the lubrication port (orifice). Gently squeeze the bottle to dispense the lubricant. When you have dispensed the desired amount of liquid, simply stop squeezing the bottle. The lubricant will retract.

JAYS-EZ-FUNNEL $8.95

E10 Torx Socket  For external torx bolts on 11.8 differential cover used on ‘13-‘18 Ram trucks. 3/8” drive.

$7.39

LC26820

$3.95

1/2” Allen-Head Tool  For 68RFE Transmission Spin-on Filter #5179267AD Nipple Removal.

GG-12ALLEN

17mm Allen-Head Tool  For NV5600 Transmission Fill Plug Removal.

17MM_TOOL

14mm Allen-Head Tool  For G56 Transmission Fill Plug Removal.

14MM_TOOL

$6.95

$8.95 $8.95

SCHLEY Common Rail Injector Puller (‘03-‘18, 6.7L & 5.9L)  Instead of trying to pry or use vise grips to remove the injector from the cylinder head damaging it, use this tool to do it properly and get your core charge back.

SCHLEY Flare Nut Wrench - 24mm  The 24mm flare nut wrench is designed to fit into the confined area of the Cummins cylinder head and hold the 24mm fuel line flare nut while the 19mm fuel coupler nut is loosened. For use with ‘03-‘18 HPCR engines.

SCH17200

$110.95

SCH66150

$44.95

SCHLEY Injection Pump and Idle Lock Nut Wrench - 10mm (‘89-‘98, 12V)  This offest wrench is designed to remove and install the 10mm injection pump mounting bolts and idle lock nuts found on the 5.9L engines.

SCH89150

SCHLEY Injection Pump and Idle Lock Nut Wrench - 13mm (‘89-‘98, 12V)  This offest wrench is designed to remove and install the 13mm injection pump mounting bolts and idle lock nuts found on the 5.9L engines.

SCH89100

SCHLEY Fuel Injection Flare Nut Socket (3/4”)  The area surrounding the injection pumps on ‘94-‘18, 5.9L and 6.7L engines is very difficult to access when removing the fuel supply lines. This tool is designed with a slim configuration and 3/8” drive to fit into this confined area.

Catalog good through April 2020 l Prices subject to change without notice.

SPECIALTY TOOL BIN

Ram 1500 EcoDiesel 27mm Low Profile Oil Filter Cap Socket (‘14-‘20, 3.0L) Helps remove and install oil filters on ‘14-‘20 Ram 1500 EcoDiesel trucks.

$27.95

$27.95

SCH99100

$36.95

Order 770-886-2500 or genosgarage.com 

l 67


SPECIALTY TOOL BIN

Tork Tool Injection Pump Gear Puller (VE, P7100, VP44, CP3)  Removing the gear from a Cummins VE, P7100, VP44 or CP3 injection pump requires a specialized tool and this tool from Tork Tool works great. Don’t risk damaging the pump by using a pry bar or similar tool.

Tork Tool Injection Pump Gear Puller (VE, P7100, VP44)  Removing the gear from a Cummins VE, P7100, or VP44 injection pump requires a specialized tool and this tool from Tork Tool works great. Don’t risk damaging the pump by using a pry bar or similar tool.

Tork Tool Injector Puller (‘89-‘98, 12V)  Pulls Cummins injectors fast! This heavy-duty tool was designed to remove Cummins 6BT and 4BT injectors without damaging the injector ball or indent groove in the head. This tool will remove even the most rusted injector.

Tork Tool Injector Puller (‘98-‘02, 24V)  This heavy-duty tool was designed to make injector changing on a Cummins engine a simple project. The CIP040 features a thick wall tube and a custom washer that is machined to center on the tube. This automatically centers the tool over the injector body.

CGP020

$38.99

CGP010

$25.99

CIP030

$24.49

CIP040

$39.49

Tork Tool Injector Crossover Tube Puller (‘98.5-‘02, 5.9L)  This tool is made to be used on ‘98.5-‘02 Dodge Cummins Turbo Diesel trucks to make pulling the crossover tube an easier job.

24VCTR010

Tork Tool Common Rail Crossover Tube Remover (‘03-‘18, 5.9L & 6.7L)  This tool is designed to be used on ‘03-‘18 Dodge Cummins Turbo Diesel trucks to make pulling the common rail connector tube an easier job.

CRCTR010

$18.75

$19.49

Fuel Rail Pressure Test Cap (‘07.5-‘18, 6.7L)  Use this tool to block off fuel injector lines at the injection rail to help isolate a leaking or faulty fuel injector.

LT-TESTCA2

Fuel Rail Pressure Test Cap (‘03-‘07, 5.9L)  Use this tool to block off fuel injector lines at the injection rail to help isolate a leaking or faulty fuel injector.

LT-TESTCA

HPCR Fuel Pump Return Flow Test Kit (‘03-‘07, 5.9L) This kit allows you to check the operation of a rail pressure relief valve and check for excessive return fuel flow from the CP3 pump. The individual tools may also be used for tests specified in the manual. Kit includes: (1) 12mm & (1) 14mm test fitting, gaskets, fuel line and a 1000cc clear plastic beaker.

Tork Tool 24-Valve Spring Compressor  The Cummins Valve Spring Compressor features a tapered design that reduces the chance of losing a valve keeper. Included in the Tork Teknology kit are hex head bolts for the bridge, custom machined bridge, compressor plate, washer, flange nut and detailed instructions.

Tork Tool 12-Valve Spring Compressor  Compress two valve springs at one time with this Cummins 12-valve spring compressor. This tool features tapered cones on the top plate which makes installation of the keepers super easy. You simply adjust the height of the plate, place a keeper on the ramp, and slide the keeper onto the valve stem.

Valve Spring Compressor  For the Turbo Diesel 12-valve owners who need to change out the exhaust valve springs to the heavy-duty spring used with exhaust brakes, this is the tool! Unlike other turn-to-compress tools, the Lisle 16750 makes compressing the spring as easy as lifting the cam lever. For cylinders #5 and #6, you replace the cam handle with a bolt, and turn it with a socket.

Flat Band Hose Clamp  This tool removes and installs flat band hose clamps used on heater and radiator hoses. Tips screw in and out to fit all clamp sizes. Ratcheting lock mechanism holds the clamp in an open position for each removal and installation. Tips can be switched to accommodate different applications. Offset jaws allow access in hard-to-reach areas.

68 l Ram Turbo Diesel Parts & Accessories  #107

$19.95

$19.95

GG-FPRKIT

44.95

CVSC010

$86.99

CVSC020

$45.25

LC16750

$36.95

LC17100

$23.75

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


NEW! 3824498

$126.95

NEW! 3824500

CUMMINS Front Cover Crankshaft Wear Sleeve Install Tool, ‘89-‘18 5.9L & 6.7L

$108.95

Scissor Disconnect Tool (3/4”, 5/8”, 1/2”, 3/8” Lines)  Disconnnect tool for metal lines used on air conditioning lines with spring lock connectors. It makes disconnecting the lines a quick and easy job.

LC63730

Scissor Disconnect Tool (5/16” and 3/8” Lines)  Disconnnect tool for metal lines used on fuel and air conditioning lines with spring lock connectors. It makes disconnecting the lines a quick and easy job.

LC39930

THEXTON Heater Core Backflush Tool with Air Assist  This tool allows you to reverse flush the heater core and other related components. 1/8” quick-connect coupler for air is not included.

THX815

Fin Straightener Comb Set  Clean and straighten condenser and evaporator coil fins with this tool. Includes 12 different size fin combs to cover almost any application. Comb 1: 8, 9, 10, 12, 14, 15 fins per inch.  Comb 2: 10.5, 11, 13, 18, 20, 22 fins per inch.

$11.95

$7.50

$62.95

ROB18403

$15.95

Hose Remover Pliers  For removal of 5/32” to 1/2” vacuum and fuel hoses. Engage the tube (line) with the black jaw. This sharpened jaw actually “DIGS” into the tube to grip it! Squeeze and the hose is easily pushed off by the silver jaw.

LC47900

OTC Flexible Hose Clamp Pliers  Use these pliers to remove hoses in those hard to reach places.

OTC4525

2-piece Hose Removal Hook Set  Made for getting to those hard to remove hoses that are tucked between various fittings inlcuding heater and radiator hoses, seals and transmission lines. Set includes two hook tools. Each tool is roughly 8” long.

AST9502

Oil Pressure Switch Socket  Fits 1-1/16” oil pressure sending unit (gauge type), found on most all ‘87 and newer Chrysler vehicles with combination light and gauge oil pressure switches. Use with 3/8” drive ratchet.

LC13250

Engine Barring Tool (‘89-‘18, 5.9L & 6.7L)  Get this tool to turn the engine over when servicing the valves. Insert this metal barring tool into the flywheel housing to engage the flywheel ring gear. The engine can then be turned by hand using a 1/2-inch drive ratchet or breaker bar.

$8.95

$56.95

$7.95

$8.75

TOOL_LTBT

$34.95

10mm Wrench  This 10mm wrench has a 12-point box end and is a must use tool to remove the top bolt on the starter on the Dodge/Cummins Turbo Diesel 5.9L and 6.7L engines.

WRENCH-10MM

Quick Quad Brake Pad Spreader  This tool can be used while the brake caliper is on the vehicle or hanging free. Works on single, double, quad and six piston calipers.

LC29100

Brake Bleeder  The kit has everything needed to bleed your brakes with no mess. The plastic bottle collects the fluid, and three adapters fit common bleeder screws.

LC19200

Handy Bearing Packer  Quickly flushes out old grease and repacks bearings with less mess. The Handy Packer works on bearings up to 3-1/2” OD. To pack a bearing, place the bearing on the piston. Press down on the cap until the old grease is forced out and the new grease shows on top of the bearing.

Brake/Hydraulic Clutch Fluid Tester  Quickly determine the percentage of moisture in brake fluid or hydraulic clutch fluid. The tool uses red, yellow, and green indicator lights for easy readings. Includes a handy pocket clip and AAA battery.

Catalog good through April 2020 l Prices subject to change without notice.

SPECIALTY TOOL BIN

CUMMINS Front Cover Crankshaft Seal, ‘89-‘18 5.9L & 6.7L  Use the correct tool and make the job of replacing a front cover crankshaft seal a one time deal.

$6.25

$58.95

$8.75

LC34550

$20.95

MTN5140

$31.95

Order 770-886-2500 or genosgarage.com 

l 69


SPECIALTY TOOL BIN

GATES Serpentine Belt Guide Tool Works great when you’re installing a serpentine belt in a very narrow location with not a lot of room to maneuver the belt. Serpentine Belt Tension Tool Helps release the tension on spring loaded pulley tensioners in tight locations. Fits idler pulleys requiring 15mm, 16mm, or 18mm hex, and 3/8” or 1/2” square drive. Also includes 13mm, 14mm and 15mm crowfoot wrenches. Fan Clutch Wrench Set (‘13-‘18, 6.7L)  This specialty wrench set will allow you to remove the fan clutch faster and without possibly damaging other parts in the process. Kit includes wrench and fan hub pulley holder. Fan Clutch Wrench Set (‘89-‘12, 5.9L & 6.7L)  You can probably figure out a workaround to get the fan clutch off with the tools you have, but this specialty wrench set will allow you to do it faster and without possibly damaging other parts in the process.

46MM Drive Impact Socket (3/4” Drive - 6-point)  For removing pitman arm on 2009 and up Ram trucks.

GATES-91209

$14.95

WLMW84010

$23.95

GG-FANWR13

$21.95

WRENCHSET1

$36.00

SUN446M

$26.50

1-7/8” Drive Impact Socket (3/4” Drive - 6-point)  For removing Dana 80 axle nut.

SUN460

1-11/16”/43MM Drive Impact Socket (1/2” Drive - 6-point)  Great socket for removing hub nuts.

CTA4145

1-5/8” Drive Impact Socket (3/4” Drive - 6-point)  For removing RWD axle nut on ‘94-‘02 Ram trucks.

SUN452

Dodge Hub Remover Set  Separates a frozen hub assembly from the steering knuckle. The tool drives on the bolt flange against loosened retaining bolts to separate assembly. Prevents damage to the knuckle and complete hub assembly. Tool drives on the bolt flange, so the head of the retaining bolt is not destroyed. Kit contains 39300 for older, smaller applications and 39250 for 2003-newer 4WD 3/4 ton and 1 ton pickups.

$26.50

$19.25

$19.95

LC38210

$32.95

15/16” Impact Socket (3/4” Drive - 6-point)  Use this socket to remove the lug nuts on your Dodge Ram truck. A great tool to keep in your Boonie Box.

SUN430D

Impact Socket Adapter (1/2” female × 3/4” male)  This adapter allows you to use your 1/2” drive ratchet with the 3/4” impact sockets so you don’t have to buy an expensive 3/4” drive ratchet.

SUN2302

Hog Ring Pliers  Instead of fighting with a regular set of pliers to install hog rings on a new seat cushion cover, make the job easier with a set of these hog ring pliers. They have an indentation that keeps the hog ring in place while squeezing it closed.

Plastic Fastener Remover  Perfect for removal of door trim that is held in place with plastic fasteners.

Emblem/Wheel Weight Remover  This plastic pry tool has sharp edges designed to get under the emblem or wheel weight to make removal easy.

5 Pc. Fastener & Trim Remover Set  All the tools you will need to remove interior and exterior trim on your truck.

Battery Brush  Cleans dirt and corrosion from battery terminals and cable clamps. The external brush cleans cable clamps and internal brush cleans terminal posts. Case is made of high impact plastic that will not weaken in cleaning solutions. Telescoping Magnetic Pocket Pick Up  Adjustable telescoping action will extend from 4-1/2” to 16-1/4”. Super strong neodymium magnet picks up all ferrous metal objects up to 2 lbs.

70 l Ram Turbo Diesel Parts & Accessories  #107

$15.95

$10.95

HOGRINGPL

$16.95

LC35400

$6.95

MLK282230

$11.95

AST4505

$11.50

LC11120

$6.75

ULL15X-DISP

$4.95

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


Geno’s Garage ‘GRILLE OF MY DREAMS’ T-Shirt MED, LRG, XLRG, 2XLRG TS-GRILL:  $9.95

6.7L ENGINE ‘FIRST TO 1000’ T-Shirt

5.9L ENGINE EVOLUTION T-Shirt

MED, LRG, XLRG, 2XLRG TS-1000TQ:  $Call NEW!

MED, LRG, XLRG, 2XLRG, 3XLRG TS-59ENG: $10.95 - $12.95 NEW!

Specify SIZE when ordering.

Specify SIZE when ordering.

Specify SIZE when ordering.

Geno’s Garage Geno’s GARAGE eat, sleep, drive ‘LONG BED DIESEL TRUCK’ t-Shirt t-shirt MED, LRG, XLRG, 2XLRG TS-DRIVE:  $9.95 Specify SIZE when ordering.

MED, LRG, XLRG, 2XLRG, 3XLRG TS-LBDT:  $8.95 Specify SIZE when ordering.

The DIESEL ODYSSEY of Clessie Cummins Clessie Cummins was the father of the American truck diesel and founded the company bearing his name. This book tells of his successes and adversities. SOFTCOVER BOOK-885000:  $25.00

CUSTOM YEAR ESTABLISHED SIGN

T-SHIRTS, DECALS & FUN STUFF

of s grille The y dream m

Geno’s GARAGE Mesh BALL Cap

Establish when you started working on your Ram Turbo Diesel truck or when you opened your Man Cave for business with this custom metal sign with the Cummins logo on it.

CAP-GS14: $12.00 One size fits all.

Measures: 20-7/8” x 8-1/2”

SIGN-GARAGE-CUSTOM: $59.95 NEW! Select Name and Year when ordering.

STAINLESS License Plate LP-1513355:  $10.95

stainless steel mug

MUG-1513347: $21.95

“CUMMINS Logo” License Plate DIAMOND PATTERN  LP-CI3741:  $7.95

Compact mug is double-wall, vacuumsealed stainless steel offering enhanced temperature retention. Holds 11 ounces.

BUBBA® CLASSIC TRAVEL MUG MUG-1437444:  $22.95

‘DODGE’ License Plate FRAME LP-11036:  $16.95

Made of stainless steel with double-wall insulation to keep your hot or cold beverages at just the right temperature, it has the Cummins C logo front and center. Holds 20 ounces.

Cummins Koozie KOOZIE-1244310:  $2.95

‘RAM’ License Plate FRAME

Get a Cummins koozie to keep your drinks cool.

LP-11135:  $16.95

EcoDiesel Decal DECAL_ECO:  $6.00

Available: White only.

Measures: 8-3/4”× 1-3/4”.

CUMMINS CHROME-PLATED License Plate FRAME 1429677:  $21.95

Catalog good through April 2020 l Prices subject to change without notice.

Geno’s Garage Vintage Logo HOODIE MED, LRG, XLRG, 2XLRG, 3XLRG HOOD-VL:  $21.95 - $23.95 Specify SIZE when ordering.

VALVE STEM COVERS 1514124: $5.95

Custom weatherresistant plastic valve stem covers are the perfect final touch for your Ram Turbo Diesel.

Cummins Carabiner Key Fob

KEYCHAIN-C191205:  $4.50

Carabiner key holder with a split ring on strap. Black strap and white Cummins logo.

NOTE: Not for climbing.

“Grille of my dreams” keychain KEYCHAIN-GRILL4G:  $7.50

Stainless steel keychain in the shape of the Fourth Generation Ram truck grille.

‘Cummins C’ Decal

10” × 10” DECAL DECAL_CUMM:  $9.00 6” × 6” DECAL DECAL_SM_C:  $6.00 Available: Black or White

Order 770-886-2500 or genosgarage.com 

l 71


CALL TO ORDER AT 770-886-2500 OR SHOP US ONLINE AT GENOSGARAGE.COM

CUMMINS STRIPED beanie

WOOL-BLEND beanie

CUMMINS MOSSY OAK BEANIE

CAP-1509500:  $16.95

CAP-1244162:  $12.95

CUMMINS rEALTREE® camo Cap

CUMMINS VINTAGE LABEL Cap

CAP-400276: $11.95

CLOSEOUT!

Geno’s Garage Vintage Logo long SLEEVE Shirt

CUMMINS softstyle T-Shirt MED, LRG, XLRG TS-1500639:  $14.95 2XLRG TS-1500639:  $16.95 3XLRG TS-1500639:  $17.95

MED, LRG, XLRG, 2XLRG TS-GS14C:  $14.95 Specify SIZE when ordering.

CUMMINS DEPENDABLE DIESEL T-Shirt MED, LRG, XLRG TS-1433408:  $15.95 2XLRG, 3XLRG TS-1433408:  $17.95

CAP-1506587: $16.95

CAP-1513200: $19.95

CUMMINS CARHARTT® odessa Cap

CAP-1513201: $29.95

Specify SIZE when ordering.

Specify SIZE when ordering.

CUMMINS CONTRAST Cap

CUMMINS olive TWILL Cap

CAP-1433873:  $9.95

CAP-1506590:  $9.95

CUMMINS QUARRY Cap CAP-400327:  $12.95

CLOSEOUT!

‘CUMMINS Oil Engine’ T-Shirt

CUMMINS 1987 INDY 500 WINNER T-SHIRT

Cummins ‘1919’ T-Shirt

MED, LRG, XLRG TS-1153101:  $15.95 2XLRG TS-1153101:  $17.95

MED, LRG, XLRG TS-400114:  $14.95 2XLRG TS-400114:  $16.95

Specify SIZE when ordering.

MED, LRG, XLRG TS-1512925: $23.95 2XLRG, 3XLRG TS-1512925: $25.95

CUMMINS STITCH Cap

CAP-1042221: $6.95

CAP-1509498: $16.95

TURBO DIESEL REGISTER

Logo Items

CUMMINS MICROFIBER Cap CAP-1501990:  $14.95

CUMMINS Diesel Cross Mesh Cap CAP-1042043:  $10.95

CAP-1433870: $12.95

Specify SIZE when ordering.

Specify SIZE when ordering.

CUMMINS rEALTREE® WASHED TRUCKER Cap

CUMMINS HEATHERED Cap

CUMMINS ‘1919’ Cap

CAP-1429729:  $11.95

CUMMINS Trucker Cap

CUMMINS Historical Oil Engine Mesh Cap

CUMMINS Denim/Mesh Cap CAP-400325: $11.95

CAP-1244166:  $11.95

CAP-400195:  $9.95

2” TDR Grille Badge

TDR-GRILLE-BDG:  $17.50

Identify your TDR affiliation with this grille badge.

BLACK WITH GRAY FLAME CAP-TDR-FLAME-87478 $14.95

HIGH PROFILE CAP-TDR (Gray):  $13.95 CAP-TDR (Red):  $13.95

LOW PROFILE CAP-TDR-LORED:  $13.95

GROUND SHIPPING FEES SHIPPING & HANDLING (ORDER AMOUNT / SHIPPING COST):

$0 – $19.99 $7.95

$20 – $24.99 $8.95

$25 – $49.99 $9.95

$50 – $74.99 $10.95

$75 – $99.99 $12.95

$100 – $149.99 $14.95

$150 – $194.99 $16.95

$195+ 6% of order total

ACTUAL SHIPPING CHARGES WILL APPLY FOR ALL AREAS OF ALASKA AND HAWAII. INTERNATIONAL CUSTOMERS CONTACT US FOR TOTAL PRIOR TO SHIPPING. EXPEDITED SHIPPING AVAILABLE. PLEASE CALL US FOR A SHIPPING QUOTE.

Profile for Turbo Diesel Register

Geno's Garage Catalog #107 - Winter  

Ram Turbo Diesel Parts & Accessories.

Geno's Garage Catalog #107 - Winter  

Ram Turbo Diesel Parts & Accessories.