Page 1

Yeah, but. Meet Geno’s Garage’s John Doughtie. If you’ve called and talked with John you may have entered the “yeah, but”...zone, a dimension of point and counterpoint. Yet, John let’s the data do the talking and his recommendations are based on the information we get from you, our customer. How so? See page 2 for the explanation.

Call the Geno’s Folks

770-886-2500 genosgarage.com

RAM TURBO DIESEL PARTS AND ACCESSORIES

1500 • 2500 • 3500 • 4500 • 5500

SUMMER 2018 101


John Doughtie’s “Yeah, but” zone - continued.

Belts & Hoses ................................................. 4 Brakes .......................................................... 40 Brite Box ....................................................... 56 CB Mounts...................................................... 15 Cup Holders.................................................... 13 Dash Kits & Covers.................................... 11-12 Drain Plugs...................................................... 3 Drivetrain Parts ........................................ 46-48 Electrical Accessories ............................. 10, 24 Emblems .................................................. 50-51 Engine Cooling................................................ 25 Engine Parts and Accessories................... 20-25 Exhaust Manifolds & Exhaust Tips ................. 26 Exterior Accessories................................. 49-53 Filters and Consumables............................... 3-6 Floormats ....................................................... 14 Fuel Caps........................................................ 51 Fuel Pumps, Fuel System Accessories...... 33-39 Gaskets...................................................... 6, 48 Gauges, Gauge Mounts and Accessories .......................................... 7-10 Headlights, Tail Lights, Cab Lights and Turn Signal Lights............. 56-57 Interior Accessories................................... 11-19 Mirrors........................................................... 55 Rebuild Kits and Replacement Parts ......... 27-32 Seat Covers & Components........................ 15-19 Service Manuals ........................................... 58 Shock Absorbers ............................................ 41 Specialty Tool Bin...................................... 59-62 Splash Guards ............................................... 53 Steering, Suspension and Brakes.............. 40-45 Steps ............................................................ 50 T-Shirts, Caps, Decals, and Novelties ....... 63-64 Tonneau Cover............................................... 49 Towing Accessories........................................ 54 Underhood Accessories ............................ 20-24

John has the Fleetguard LF16035 in his left hand , the Fleetguard LF3972 in his right. Which does he recommend? We all know that LF3972 (painted in Mopar colors) is the original filter for the ‘89-current Turbo Diesel truck. John chimes-in, “Yeah, but the LF16035 is the oil filter with Fleetguard’s Stratapore filter media. As an audience you’ve learned the Stratapore media is better (TDR Issue 71, pages 60 - 69).” You counter, “Yeah, but it is more expensive.” John responds, “Yeah, but let’s look at the facts. Our Geno’s Garage customers purchase the LF16035 10 to 1 versus the LF3972. So my recommendation is based on the data you, our customer, has provided.” Yeah, but: you can’t argue with the data (manipulate data, that’s another story). Stick with the LF16035 or LF3972. You can’t go wrong.

=

$1.00 

donation

Geno’s Garage will donate $1.00 for every LF16035 oil filter sold from August 1 through October 31, 2018. Over the past 15 years we’ve done a charitable project during the Christmas Season. In 2003 we were inspired by the charitable giving of a local business owner. Contrary to the daily news, there are good people helping others everyday. For the past several years Geno’s Garage and TDR employee Wendy Poole and her husband have supported Special Operations Warrior Foundation (SOWF). The SOWF ensures full financial assistance for a post-secondary degree from an accredited two or fouryear college, university, technical, or trade school; and offers family and educational counseling, including in-home tutoring, to the surviving children of Army, Navy, Air Force and Marine Corps special operations personnel who lose their lives in the line of duty. The SOWF also provides immediate financial assistance to severely wounded and hospitalized special operations personnel. The mission of this 4 star non profit 501©(3) organization is to support and assist families of fallen and wounded special operations warriors through these two programs: 1)provide college educations for all children of fallen special operations warriors and; 2) provide immediate financial assistance to the families of severely wounded special operations warriors. In the past 5 years 94 percent of SOWF students graduated from college. This is well over the national average of 59%. Last year the SOWF’s breakdown of scholarship recipients, 700+ students in HS, Elementary and Pre-school. 140 Students in College and 227 College graduates. To learn more please visit. www.specialops.org. Please help us this year in supporting this organization. Thank you all for your support. Robin Patton and the Geno’s Garage Staff

JOIN THE TURBO DIESEL REGISTER FOR MILLIONS OF MILES OF KNOWLEDGE A yearly subscription is $35.00 U.S. and $45 Canadian/ International. You can subscribe online, by mail, or by phone. ONLINE: www.tdr-online.com

ORDER/TECH

770-886-2500 or 800-755-1715 Monday-Friday: 8:30AM to 5:30PM EST 1150 Samples Industrial Drive Cumming, GA 30041

TURBO DIESEL REGISTER 1150 Samples Industrial Drive, Cumming, GA 30041 BY PHONE: Subscription line: (888) 440-8371 Note that the toll free subscription phone number is for subscription processing. Phone operators cannot answer technical questions. Throughout the catalog we’ve added a highlighted “H” and script that references the issue of the TDR magazine where you can find further explanation or a text write-up. Example H is for History; TDRXX for TDR Issue XX of the TDR magazine, p for the page in the magazine. We hope this data helps. I . This symbol indicates that installation instructions for the part are available at our website. V . When you see this, you will find an installation video available on that product’s page on our website.


‘13-‘18, 6.7L

‘07.5-‘12, 6.7L

EGR1 (Filter):  $121.95 EGR2 (No Filter):  $51.95

EGR1-A (Filter):  $119.95 EGR2-A (No Filter):  $49.95

‘13-‘18, 3500/4500/5500 Cab/Chassis EGR3-A (Filter):  $111.95 EGR3-B (No Filter):  $41.95

Using your trusty Owner’s Manual you may have noted that changing-out the crankcase vent filter (CCV) is a required service at the 67,500 mile interval. Further, for those 2007.5-2012, 2500/3500 pickup truck owners [the non-diesel exhaust fluid (DEF) style aftertreatment] there is also a “clean the exhaust gas recirculation (EGR) valve and cooler service” required. The ‘07.5-Current Cab and Chassis trucks and ‘13-Current 2500/3500 use the DEF exhaust aftertreatment. Looking closely at their Owner’s Manuals reveals that a CCV filter change is also required at 67,500 miles, However, the cleaning of the EGR valve and EGR cooler is not a requirement. We asked the folks at Cummins and they responded that you may wish to include the cleaning, but it is typically not needed until the second crankcase vent filter change. They did suggest an inspection of the EGR valve. “Sooty/dusty is good, shellac/crusty needs to be cleaned.” If the valve is shellac/crusty, don’t skimp, go ahead and do the entire EGR system cleaning. If you price the EGR Cleaning Kit parts over-the-counter at Mopar the cost is over $180 plus $40 for the cleaning solution. We would suggest using the Cummins equivalent parts for the gaskets and filter that are needed. We would suggest using Simple Green (it smells just like the Mopar cleaner) or Purple Power as your cleaning solution. Our 6.7L EGR Cleaning Kit contains the following: (1) Large Exhaust Manifold Gasket • (2) EGR Valve Gaskets • (1) EGR Butterfly Gasket • (1) ‘13-‘18 Exhaust Manifold Gasket or (1) ‘07.5-‘12 Exhaust Manifold Gasket (3) EGR Plumbing Gaskets • (1) Airhorn Gasket • (2) Rubber Plugs Freddie knows that if you are going to spend time cleaning the EGR valve and EGR cooler, that you’ll remove and clean the intake air horn that the EGR valve is bolted to. The replacement gasket for air horn-to-intake manifold is 5264566 and it is included in our EGR Cleaning Kit. Additionally our kit has thorough instructions for removal of the parts and tips on best method(s) for cleaning. Finally, Freddie Frugal adds two rubber plugs for the ends of your cooler assembly so you don’t waste cleaning fluid. Fill up the cooler, cap it off, and soak it overnight. Use the caps to shake the cooler with the cleaner inside.

Filter Maintenance Kits ‘13-‘18, 6.7L MK2013: $286.50 (4) LF16035; (2) FS-MOP68157291 (2) PFF54529; No Air Filter

‘10-‘18, 6.7L MK2010N: $188.00 (4) LF16035; (2) FS-MOP68157291; No Frame Filter or Air Filter

‘07.5-‘09, 6.7L MK2007: $133.50 (4) LF16035; (2) FS43258; No Air Filter

“Boonie Box”

‘03-‘07, 5.9L MK2003: $86.75

For your convenience we have assembled a collection of spare parts that can be stored away in case of a problem while traveling in the boonies. Thus the name “Boonie Box.”

(4) LF16035; (2) FS19856; No Air Filter

‘00-‘02, 5.9L MK12626: $110.50 (4) LF16035; (2) FS19855; (1) AF25541

‘97-‘99, 5.9L MK12627: $121.50 (4) LF16035; (2) FS19598; (1) AF25541

All Maintenance Kits use the Fleetguard StrataPore oil filter and either a Fleetguard, Mopar or Racor branded fuel filter (same filter, but we offer you the less expensive item). Also, the kits offer either a Fleetguard or a delete of the air filter element.

‘94-‘96, 5.9L MK12628: $116.50 (4) LF16035; (2) FS1253; (1) AF25541

‘89-‘93, 5.9L MK12625: $85.25 (4) LF16035; (2) FS1232; No Air Filter

We took time to analyze the filter purchasing quantities of our customers. Predictably, in a given maintenance interval (i.e. a 30,000 mile period), the oil filter is changed four times, the fuel filter two times, and the air cleaner is changed once. We’re pleased to offer this common-sense idea in a prepackaged filter maintenance kit for your Ram Cummins Diesel truck.

FILTERS, BELTS, HOSES & CONSUMABLES

6.7L EGR Cleaning Kit

Boonie Boxes include: Toolbox (1) FLEETGUARD StrataPore premium oil filter • (1) F LEETGUARD or MOPAR fuel filter • (1) G ATES hose kit • •

(upper & lower hoses)

(1) G ATES belt

(1) G ATES or DAYCO Tensioner Pulley

‘10-‘12, 6.7L BOONIEBOX10

(NOTE: Kit includes NanoNet Fuel Filter)

‘07.5-‘09, 6.7L BOONIEBOX0709FS2

(NOTE: Kit includes FS2 Fuel Filter)

$173.00 $148.00

‘03-‘07, 5.9L BOONIEBOX0307

$125.00

‘00-‘02 BOONIEBOX0002

$114.00

‘98.5-‘99 BOONIEBOX98599

$119.00

‘97-‘98 BOONIEBOX9798

$119.00

‘94-‘96 BOONIEBOX9496

$117.00

‘Finger Touch’ Oil Drain Valve

Now drain your engine oil with the touch of a finger. No more stripped threads, fractured drain plugs, or leaky gaskets. 18MM DRAIN VALVE ‘02-‘18, 5.9L & 6.7L FTV-104A: $21.95 ‘89-‘93, 12V FTV-104: $21.95 18MM OPTIONAL REMOVABLE 3/8” HOSE NIPPLE ‘02-‘18, 5.9L & 6.7L ‘89-‘93, 12V FTV-H001: $5.00 22MM DRAIN VALVE ‘94-‘01 FTV-7B: $24.95 22MM OPTIONAL REMOVABLE 5/8” HOSE NIPPLE ‘94-‘01 FTV-H002: $6.00 14MM DRAIN VALVE ‘14-‘18, Ram EcoDiesel FTV-106: $21.95 14MM OPTIONAL REMOVABLE 3/8” HOSE NIPPLE ‘14-‘18, Ram EcoDiesel FTV-H001: $5.00 * T he removable hose nipple is a convenience item. Attach a hose and let it drain to a remote location. DORMAN 18MM Oil Drain Plug DRM0970041 Gasket (‘89-‘93 & ‘01-‘18) $1.00

Heavy-Duty Oil Plug (with magnetic tip)

18mm (‘02-‘18) 5.9L & 6.7L HDOP-KIT-18MM2:  $19.95 22 mm (‘94-‘01) HDOP-KIT-22MM:  $19.95 18 mm (‘89-‘93) HDOP-KIT-18MM:  $19.95

BM-80250:  $10.00 TIP: The B&M drain plug is an easy way to add a 1/8 NPT temperature sensor to a trans pan by replacing the plug with a sensor.

Catalog good through October 2018 l Prices subject to change without notice.

‘02-‘18, 5.9L/6.7L  EZ-DP-18MMPLA-DG:  $37.95 ‘94-‘01  EZ-DP-22MMPL-DG:  $37.95 ‘89-‘93  EZ-DP-18MMPL-DG:  $37.95 ‘89-‘18  EZ Drain Valve Tube (Large) EZ-TUBE-DG:  $14.95 NOTE: Tube sold separately.

Ram 1500 EcoDiesel ‘NO SPILL’ Drain Valve & Tube

14-1.5mm Drain Valve EZ-DP-15-14150-01:  $37.95 EZ Drain Valve Tube (Small) EZ-TUBE-CD-2001:  $14.95

B&M Drain Plug

DORMAN 22MM Oil Drain Plug Gasket (‘94-‘01)

Ram Cummins 2500/3500 ‘NO SPILL’ Drain Valve & Tube

DRM0971331 $2.95

NOTE: Drain valve will not work without the tube. Installation requires 30mm socket or wrench. NOTE: Tube sold separately.

• Permanently replaces the drain plug. • Patented drain tube screws into the oil plug. • Drain the oil, remove the drain tube – thus resealing the drain valve – reinstall the O-ring sealed drain cap, and you’re finished.

Order 770-886-2500 or genosgarage.com

l3


FILTERS, BELTS, HOSES & CONSUMABLES

RADIATOR HOSES & HEATER HOSES MOPAR - Upper Radiator Inlet Hose  (‘15-‘18, 6.7L)

MOP-68227796: $71.95

MOPAR - Upper Secondary Inlet Hose (Dual Alternator)  (‘14, 6.7L)

MOP-68224266: $53.95

MOPAR - Upper Inlet Hose  (‘13-‘14, 6.7L)

MOP-52014722: $81.95

MOPAR - Upper Secondary Inlet Hose  (‘13-‘14, 6.7L)

MOP-68166469: $43.95

GATES - Upper Radiator Hose  (‘10-‘12, 6.7L)

GATES-23955: $12.95

GATES - Upper Radiator Hose  (‘03-‘09, 5.9L & 6.7L)

GATES-22892: $13.45

GATES - Upper Radiator Hose  (‘98.5-‘02, 5.9L, 24V)

GATES-22645: $15.75

GATES - Upper Radiator Hose  (‘94-‘98, 5.9L, 12V)

GATES-22081: $15.75

GATES - Upper Radiator Hose  (‘91.5-‘93) Intercooled

GATES-21930: $12.95

GATES - Upper Radiator Hose  (‘89-‘91) Non-Intercooled

GATES-20957: $9.95

GATES - EcoDiesel Upper Radiator Hose  (‘14-‘18, 3.0L) Ram 1500

GATES-24275: $17.95

MOPAR - EcoDiesel Upper Radiator Hose  (‘14-‘18, 3.0L) Ram 1500

MOP-52014952: $29.95

MOPAR - Lower Outlet Hose  (‘15-‘18, 6.7L)

MOP-68227797: $23.95

MOPAR - Lower Outlet Hose  (‘13-‘14, 6.7L)

MOP-52014723: $24.95

MOPAR - Lower Secondary Outlet Hose  (‘13-‘14, 6.7L)

MOP-68166470: $36.95 GATES-23956: $11.95

GATES - Lower Radiator Hose  (‘10-‘12, 6.7L) GATES - Lower Radiator Hose  (‘03-‘09, 5.9L & 6.7L)

GATES-22893: $14.25

GATES - Lower Radiator Hose  (‘94-‘02)

GATES-22082: $12.95 GATES-20431: $13.95

GATES - Lower Radiator Hose  (‘89-‘93) Intercooled MOPAR - EcoDiesel Lower Radiator Hose  (‘14-‘18, 3.0L) Ram 1500

MOP-52014953: $45.95

GATES - EcoDiesel Engine to Reservoir Hose  (‘14-‘18, 3.0L) Ram 1500

GATES-12091: $14.50

GATES - 5/8” Molded Heater Hose - Heater Outlet  (‘11-‘12, 6.7L)  Cut to fit application.

GATES-18641: $4.00

GATES - 5/8” Molded Heater Hose - Heater Outlet  (‘07.5-‘10, 6.7L)  Cut to fit application.

GATES-18710: $6.50

GATES - 5/8” Molded Heater Hose - Heater Inlet  (‘07.5-‘10, 6.7L)  Cut to fit application.

GATES-18774: $9.00

GATES - 5/8” Molded Heater Hose - Heater to Pipe 1  (‘03-‘07, 5.9L)  Cut to fit application.

GATES-19168: $12.75

GATES - 5/8” Molded Heater Hose - Heater to Pipe 2  (‘03-‘07, 5.9L)  Cut to fit application.

GATES-19213: $6.00

GATES - 5/8” x 16” Molded 90° Heater Hose  (‘98.5-‘02, 24V)  Cut to fit application.

GATES-28467: $8.50

GATES - 9/32” Molded Coolant Bypass Heater Hose  (‘94-‘98, 12V)  Cut to fit application.

GATES-18124: $5.50

GATES - 5/8” Molded 90° Coolant Hose  (‘89-‘98, 12V & ‘98.5-‘02, 24V)  Cut to fit application.

GATES-20338: $3.75

CUMMINS - 3.25” Upper Cabin Heater Hose  (‘06-‘07, 5.9L)  Find clamps on page 31.

4939438: $12.95

CUMMINS - 2.5” Lower Cabin Heater Hose  (‘03-‘07, 5.9L)  Find clamps on page 31.

3967022: $8.50

CUMMINS - 3” Silicone Upper Cabin Heater Hose  (‘03-‘05)  Find clamps on page 31.

3820663: $21.95

GATES - EcoDiesel Molded Heater Hose - Heater Control Valve to Engine  (‘14-‘18, 3.0L) Ram 1500

GATES-12088: $17.95

GATES - 5/8” Straight Standard Heater Hose  (‘98.5-‘02, 24V & ‘89-‘98, 12V) Cut to fit application.

GATES-28411: $1.45/ft.

GATES - 5/8” Straight Silicone Heater Hose  (‘89-‘94, 12V)  Cut to fit application.

GATES-26241: $6.25/ft.

SERPENTINE BELTS MOPAR - Serpentine Belt (Dual Alternator)  (‘13 -‘18, 6.7L)

MOP-4627589: $109.95

MOPAR - Serpentine Belt (Single Alternator)  (‘13 -‘18, 6.7L)

MOP-4627751: $54.95

GATES - HD Serpentine Belt (A/C & Dual Alternator)  (‘13-‘18, 6.7L)

GATES-K081298HD: $52.95

GATES - Serpentine Belt (A/C & Single Alternator)  (‘13-‘18, 6.7L)

GATES-K081243HD: $25.95

GATES - HD Serpentine Belt (assumes A/C)  (‘03-‘12, 5.9L & 6.7L)  See Accessory Drive Belt Kits, page 31.

GATES-K081264HD: $36.95 GATES-K081102: $26.95

GATES - Serpentine Belt (non-A/C)  (‘03-‘09) CUMMINS - Serpentine Belt (assumes A/C)  (‘03-‘07, 5.9L) with Jacobs Brake GATES - HD Serpentine Belt (assumes A/C)  (‘94-‘02)  See Accessory Drive Belt Kits, page 28.

GATES-K080653: $27.95

GATES - Serpentine Belt (non-A/C)  (‘94-‘02) GATES - HD Serpentine Belt (assumes A/C)  (‘91.5-‘93) Intercooled

GATES - HD Serpentine Belt (assumes A/C)  (‘89-‘91) Non-intercooled GATES - Serpentine Belt (non-A/C)  (‘89-‘91) Non-intercooled & no air-conditioning

GATES - EcoDiesel HD Serpentine Belt (‘14-‘18, 3.0L) Ram 1500

4 l Ram Turbo Diesel Parts & Accessories  #101

GATES-K080830HD: $34.95 GATES-K080635: $27.95

GATES - Serpentine Belt (non-A/C)  (‘91.5-‘93) Intercooled

MOPAR - EcoDiesel Serpentine Belt (‘14-‘18, 3.0L) Ram 1500

BELT-3947077: $65.95 GATES-K080810HD: $26.95

GATES-K080816HD: $32.95 GATES-K080645: $19.95 MOP-4627897: $31.95 GATES-KO60812HD: $15.95

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


AF-53034051AB: $36.95 AF-27684: $27.95 AF-53034249AA: $31.95 AF-26106: $17.95 AF-4177: $18.95 AF-25541: $24.95

FLEETGUARD - Air Filter  (‘07.5-‘18, 6.7L) MOPAR - Air Filter  (‘03-‘07, 5.9L) FLEETGUARD - Air Filter  (‘03-‘07, 5.9L)  Old design with foam front. FLEETGUARD - Air Filter  (‘03-‘07, 5.9L)  New design without foam front. FLEETGUARD - Air Filter  (‘94-‘02, 5.9L) FLEETGUARD - Air Filter  (‘94-‘02, 5.9L)  Supersedes AF-25541

AF-4189: $20.95

FLEETGUARD - Air Filter  (‘93, 5.9L)

AF-25023: $31.95 AF-4555M: $31.95

FLEETGUARD - Air Filter  (‘89-‘92, 5.9L)

AF-68190705: $34.95

MOPAR - EcoDiesel V6 Air Filter  (‘14-‘18, 3.0L) Ram 1500

OIL FILTERS 5083285AA: $17.95 NEW!

MOPAR - Oil Filter  (‘94-‘18) Fits 2500/3600/4500/550 trucks. H TDR71, p60-69

FLEETGUARD - Oil/StrataPore  (‘89-‘18, 5.9L & 6.7L) This filter can be used on ALL ‘89-‘18 Turbo Diesel engines. 

The advantage of this filter is the fluted can which simplifies removal from underneath using the Lisle End Cap Filter Wrench (#LC61580). FLEETGUARD - Oil/Standard  (‘89-‘18, 5.9L & 6.7L) This filter can be used on ALL ‘89-‘18 Turbo Diesel engines. The advantage

of this filter is the fluted can which simplifies removal from underneath using the Lisle End Cap Filter Wrench (#LC61580). 

LF16035: $14.95 LF3972: $9.95

H TDR71, p60-69

LF68229402: $53.95

MOPAR - EcoDiesel V6 Replacement Oil Filter Cartridge  (‘14-‘18, 3.0L) Ram 1500

CC2543: $26.00

FLEETGUARD - Oil Sampling Kit  Monitor engine oil. (Includes sample collection bottle, instructions and analysis of sample.)­

FUEL FILTERS PFF54529: $51.95

RACOR - Fuel/Water Separator (Chassis Mounted)  (‘13-‘18, 6.7L) 2500/3500/4500/5500 MOPAR - Fuel/Water Separator (Chassis Mounted)  (‘13-‘18, 6.7L) 2500/3500/4500/5500       H TDR80, p63

68197868: $31.95 FS_MOP68197867: $56.95

MOPAR - Nanonet Fuel Filter  (‘10-‘18, 6.7L)  3 micron

FS_MOP68157291: $68.95

MOPAR - Drain Valve/Water In Fuel Sensor (Chassis Mounted)  (‘13-‘18, 6.7L) 2500/3500/4500/5500 

H TDR80, p63

If purchasing fuel filters for your ‘10-‘12 truck, we recommend the NanoNet filters.

FLEETGUARD - Nanonet Fuel Filter  (‘10-‘18, 6.7L)  3 micron

FS53000: $69.95 FS_MOP68065608: $48.95

MOPAR - Fuel Filter  (‘10-‘12, 6.7L)  5 micron

FS43255: $46.95

FLEETGUARD - Fuel Filter  (‘10-‘12, 6.7L)  (5 micron)

FS43257: $51.95

FLEETGUARD - Fuel Filter  (‘07.5-‘09, 6.7L) 5 Micron - Filter and shell. FS2 design.

FS_MOP68061633: $78.95

MOPAR - Fuel Filter  (‘07.5-‘09, 6.7L) 5 Micron - Filter and shell. FS design. 2

FS43258: $40.25

FLEETGUARD - Fuel Filter  (‘07.5-‘09, 6.7L) 5 Micron - Filter only. FS2 design.

FILTERS, BELTS, HOSES & CONSUMABLES

AIR FILTERS MOPAR - Air Filter  (‘07.5-‘18, 6.7L)

FS_MOP68061634: $68.95

MOPAR - Fuel Filter  (‘07.5-‘09, 6.7L) 5 Micron - Filter only. FS2 design

FS19856: $15.75

FLEETGUARD - Fuel Filter  (‘03-‘07, 5.9L) 7 Micron FLEETGUARD - Fuel Filter  (‘00-‘02, 5.9L) 10 Micron FLEETGUARD - Fuel Filter  (‘97-‘99, 5.9L) FLEETGUARD - Fuel Filter (‘94-‘96) (Also for Prime-Loc on 12-valve engines, ‘94-‘98)

Buy 6 oil or fuel filters and save 5% on the purchase price.

FS19855: $15.75 FS19598: $20.50 FS1253: $18.95

FLEETGUARD - Fuel Filter (‘89-‘93) Does not use Water/Fuel sensor.

FS1251: $13.95

FLEETGUARD - Fuel Filter (‘89-‘93) Requires Water/Fuel sensor.

FS1232: $14.95

MOPAR - EcoDiesel V6 Fuel Filter  (‘14-‘18, 3.0L)  Ram 1500  3 micron V

FS_MOP68235275: $38.95

FLEETGUARD - Fuel Filter For Prime-Loc on 24-valve engines up to 2002

FS19519: $23.95 FF5712: $9.95

FLEETGUARD - FASS Fuel Filter  For FASS System, the older style Titanium 95 Series only.  (3 micron)  Replaces FF2003

FS19594: $15.95

FLEETGUARD - FASS Fuel/Water Separator  For FASS System, Titanium 95 Series only.  Replaces WS2001/FS19768 FLEETGUARD - FASS Fuel/Water Separator For FASS System, HD 150 Series. (Stainless steel/water separator)

FS1001: $17.95

Also fits FASS 95 GPH fuel pump with grey housing. FASS - Fuel Filter  For FASS System, HD 150 Series only.  (3 micron)  Replaces HF6604

FF1003: $33.25

FASS - Fuel/Water Separator  For FASS Platinum Systems and new style Titanium pump fuel filter.  (3 micron)  Replaces FWS-3003

FF-3003: $22.00

FASS - DRP In-line 5/16” Pre-Filter  For DRP-02 fuel pumps.

NA-33007: $3.25 FF5079: $8.50

Universal In-line Fuel Filter Screen  This 3/8” filter is required when using the DDRP with the Vulcan Relo Kits.

TRANSMISSION FILTERS MOP-68224232: $75.95

MOPAR - Transmission Filter, Aisin AS69RC (‘13-‘18) MOPAR - Replacement Transmission Sump Filter, 68RFE (2WD)  (‘07.5-‘09, 6.7L)

MOP-5015267: $36.95

This transmission pan does not require a gasket. Use RTV silicone or sealant only.

MOPAR - Replacement Transmission Sump Filter, (68RFE and Mag-Hytec pan)  (‘07.5-‘18, 4WD) & (‘10-‘18, 2WD)

with 6.7L engine. This transmission pan does not require a gasket. Use RTV silicone or sealant only.

MOP-5013470: $34.95 MOP-5179267: $21.95

MOPAR - Replacement Transmission Screw-On Filter, 68RFE (4WD and 2WD)  (‘07.5-‘18, 6.7L) MOPAR - Replacement Transmission Sump Filter, Aisin AS68RC 6-speed Auto (4WD and 2WD)  (‘07.5-‘12, 6.7L)

MOP-68019688: $123.95

MOPAR - Transmission Filter and Gasket Replacement Kit (‘98-‘07)

MOP-KIT-52118789: $34.95

MOPAR - Transmission Filter and Gasket Replacement Kit (‘89-‘97)

MOP-KIT-3515996: $23.95

MOPAR - Transmission Filter ONLY (‘98-‘07) MOPAR - Transmission Filter ONLY (‘89-‘97) MOPAR - EcoDiesel Transmission Service Kit  (‘14-‘18, 3.0L)  Ram 1500

Catalog good through October 2018 l Prices subject to change without notice.

MOP-52118789: $21.95 MOP-3515996: $10.95 MOP68225344: $177.95

Order 770-886-2500 or genosgarage.com

l5


FILTERS, BELTS, HOSES & CONSUMABLES

GASKETS & SEALS 4955354: $399.00

CUMMINS Upper Engine Gasket Kit  (‘07.5-‘10, 6.7L)

Upper engine gasket kits include a standard thickness head gasket.

CUMMINS Upper Engine Gasket Kit  (‘03-‘07, 5.9L) CUMMINS Upper Engine Gasket Kit  (‘98.5-‘02, 5.9L 24V)

4089819: $379.95 4090035: $230.00 4089649: $319.95

CUMMINS Upper Engine Gasket Kit  (‘89-‘98, 5.9L 12V) CUMMINS Lower Engine Gasket Kit  (‘07.5-‘10, 6.7L)

Please check website for all gasket kit contents.

CUMMINS Lower Engine Gasket Kit  (‘03-‘07, 5.9L)

4955355: $114.95 4089173: $185.95

CUMMINS Lower Engine Gasket Kit  (‘98.5-‘02, 5.9L 24V)

3800487-01: $279.00

CUMMINS Lower Engine Gasket Kit (‘89-‘98, 5.9L,12V)

3802376-01: $279.00

CUMMINS Rear Main Seal Cover Gasket (‘03-‘18)

3957492: $6.50

CUMMINS Rear Main Seal Cover Gasket (‘89-‘02)

4947667: $7.50

CUMMINS Rear Crank Seal Service Kit  (‘89-‘18, 5.9L & 6.7L) Above rear main seal gasket required when replacing rear crank seal.

3934486: $79.95

CUMMINS Front Cover Crank Seal  (‘07.5-‘18, 6.7L)

4931561: $10.95

CUMMINS Front Cover Crank Seal  (‘89-‘07, 5.9L)

3937111: $34.95

Crankcase Breather Gasket  (‘07.5-‘18, 6.7L)

3999820: $10.95

Replacement Oil Cap O-ring (‘98.5-‘18)

3973512: $3.00

Valve Cover Gasket  (‘06-‘18, 5.9L & 6.7L)

5367847: $119.00

Valve Cover Gasket  (‘03-‘05, 5.9L)

MSI6511: $29.95

Valve Cover Gasket  (‘98.5-‘02, 5.9L)

MSI6516: $39.95

Valve Cover Gasket  (‘89-‘98, 5.9L 12V) Requires 6 gaskets for installation.

MSI7335: $4.95

Valve Cover Bolt Rubber Seal Isolator & Washer  (‘06-‘18, 5.9L & 6.7L) Requires 6 seals for installation.

3973853: $6.00

Valve Cover Bolt Rubber Seal Isolator, Bolt & Washer  (‘04.5-‘05, 5.9L 24V) Requires 6 seals for installation.

3957203: $7.50

Valve Cover Bolt Rubber Seal Isolator & Washer  (‘98.5-‘02, 5.9L 24V) Requires 5 seals for installation.

3942659: $6.50

Valve Cover O-ring  (‘89-‘98, 5.9L 12V) For valve cover bolts. Requires (6) O-rings for installation.

3910824: $2.50

Valve Cover O-ring  (‘03-‘04, 5.9L 24V) For valve cover bolts. Requires (6) O-rings for installation.

3087740: $1.75

Valve Cover O-ring  (‘89-‘98, 5.9L 12V) For valve cover bolts. Requires (6) O-rings for installation.

3935449: $2.95

Lower Valve Cover Rocker Assembly Gasket  (‘03-‘18, 5.9L & 6.7L)

MSI6508: $8.95

Side Cover Gasket (Pushrod Cover)  (‘89-‘02, 5.9L)

MSI7710: $9.95

Engine Gear Cover Gasket  (‘94-‘02, 5.9L)

3918673: $34.95

Engine Gear Cover Gasket  (‘89-‘93, 5.9L)

3914385: $27.95

Engine Front Cover Gear Housing to Block Gasket  (‘03-‘18, 5.9L & 6.7L)

5341995: $14.95

Engine Front Cover Gear Housing to Block Gasket  (‘89-‘02, 5.9L)

3938156: $26.00

Intake Plenum Gasket  (‘03-‘18, 5.9L & 6.7L)

3947530: $14.50

Intake Plenum Gasket  (‘89-‘02, 5.9L)

3938152: $14.95

Intake Air Horn Replacement Gasket  (‘07.5-‘18, 6.7L)  Requires 1 gasket for installation.

5264566: $3.50

Intake Air Horn Replacement Gasket  (‘89-‘07, 5.9L)  NOTE: ‘89-‘98 12V requires (1) gasket; ‘98.5-‘07 requires (2) gaskets.

3969988: $4.99

EGR Valve Gasket (‘07.5-‘18, 6.7L)  Requires 2 gaskets for installation. Sold individually.

3979769: $2.15

Exhaust Manifold Gasket  (‘98.5-‘18, 5.9L & 6.7L)  Requires 6 gaskets for installation. Sold individually.

5447591: $5.95

Exhaust Manifold Gasket  (‘89-‘98, 5.9L 12V)  Requires 6 gaskets for installation. Sold individually. Exhaust to Turbo Gasket  (‘07.5-‘18, 6.7L) Turbo to Exhaust Manifold Gasket  (‘13-‘18, 6.7L)

3927154: $6.50 68071676AA: $16.95 5266419: $23.95

Turbo to Exhaust Manifold Gasket  (‘07.5-‘12, 6.7L)

5260648: $9.50

Turbo to Exhaust Manifold Gasket  (‘03-‘07, 5.9L)

3949530: $4.95

Turbo to Exhaust Manifold Gasket  (‘89-‘02, 5.9L)

3901356: $5.25

Turbo Oil Drain Gasket  (‘13-‘18, 6.7L)

4980340: $3.00

Turbo Oil Drain Gasket  (‘03-‘12, 5.9L & 6.7L)

5264568: $3.00

Turbo Oil Drain Gasket  (‘89-‘02, 5.9L) OEM Transfer Pump to Fuel Cannister O-ring  (‘03-‘04) Fuel Pre-Heater and Lift Pump Gasket  (‘89-‘98, 5.9L) Fuel Pre-Heater Upper Gasket  (‘94-‘98, 5.9L)

6 l Ram Turbo Diesel Parts & Accessories  #101

5264569: $3.50 5114437AA: $5.50 3939258: $4.50 3834185-S: $2.25

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


DESCRIPTION

Factory-Match Factory Match (‘10-up) (‘03-‘09)

Phantom II Series

AM-8509 $86.95 AM-8508 $86.95 AM-8507 $86.95

AM-8506 $86.95 AM-8505 $86.95 AM-8504 $86.95

AM-7505 $86.95 AM-7504 $86.95

2” Electric Fuel Pressure Gauge • 100 psi *

AM-8564 $244.95

AM-8563 $244.95

AM-7563 $244.95

2” Electric Fuel Pressure Gauge • 30 psi*

AM-8561 $244.95

AM-8560 $244.95

2” Boost Gauge • 100 psi (1/8 NPT) (includes fittings, tubing and light kit)

2” Boost Gauge • 60 psi (1/8 NPT) (includes fittings, tubing and light kit)

2” Boost Gauge • 35 psi (1/8 NPT) (includes fittings, tubing and light kit)

(electric, full sweep, stepper motor movement, includes 1/8 NPT sending unit) (electric, full sweep, stepper motor movement, includes 1/8 NPT sending unit)

Fuel Pressure Snubber

Phantom Series AM-5706 $74.95 AM-5705 $74.95 AM-5704

$74.95

Ultra-Lite II Series

Ultra-Lite Series

Z Series

AM-4306

$74.95

AM-4905 $86.95 AM-4904 $86.95

AM-4305

AM-2617

AM-4304

AM-2616

$74.95

$66.95

$74.95

$65.95

AM-4963

$244.95 AM-5760

AM-4360

$250.95

AM-2660

$249.95

$225.95

Recommended on all AutoMeter electric fuel pressure gauges installed in Ram Cummins trucks.  AM-3279: $24.95

#4 Braided Stainless Steel Line Kit

*If you are installing an AutoMeter electric fuel pressure gauge in your Ram Cummins truck, you MUST install this braided stainless steel line kit and #3279 fuel pressure snubber to prevent premature failure of the sending unit. Failure to do so will void the gauge warranty.  AM-3227: $54.95

2” Exhaust Gas Temperature Gauge • 0°-1600°

AM-8546 $212.95

AM-8544 $212.95

AM-7544

2” Trans Temp Gauge • 100°-260° (Full Sweep)

AM-8558 $179.95

AM-8557 $179.95

AM-7557

AM-8550 $87.95

AM-8549

AM-7549

AM-5757

AM-7527 $99.95

AM-5727 $84.95

(includes Street Series Probe, wiring and light kit) (includes 1/8 NPT temp sender)

H TDR74, p8-10

2” Trans Temp Gauge • 100°-250° (Short Sweep) (includes 1/8 NPT temp sender)

$87.95

AM-2654

Available only at Geno’s Garage

AM-4944

AM-4949

AM-4357

AM-2640

AM-4927 $104.95

AM-4327 $84.95

AM-2634 $77.95

AM-5707900 $137.00

AM-4307900 $137.00

AM-2607900 $137.00

$212.95

$199.95

$183.95

AM-4957

$179.95

$87.95

(1/8 NPT sender and 1/4 NPT fittings/adapters) (includes isolator and tubing kit)

AM-4344

$199.95

$179.95

2” Oil Pressure Gauge • 0-100 psi

2” Mechanical Fuel Pressure Gauge • 0-35 psi *

AM-5744

$212.95

$65.95

$87.95

$66.95

$55.95

2” Fuel Rail Pressure Gauge • 0-30,000 psi

AM-8587 $216.95

AM-8586 $216.95

AM-7586 $214.95

AM-5786 $179.95

AM-4386 $179.95

AM-2686 $152.95

2” Fuel Rail Pressure Gauge • 0-30,000 psi

AM-8594 $216.95

AM-8593 $216.95

AM-7593 $214.95

AM-5793 $179.95

AM-4393 $179.95

AM-2693 $149.95

(‘03-‘07, 5.9L trucks) (‘07.5+, 6.7L trucks)

LED Lighting Dimmer

Designed to allow isolated dimming for all AutoMeter gauges with LED lighting separate from OEM dash.  AM-9114: $39.95

*The fuel pressure gauges may require additional hardware depending on application. See page 36 for hardware.

Back-up Camera for CTS/CTS2

Insight CTS2 & CS2

The CTS2 line of products have a built-in video port that allows users to connect the Edge backup camera. The CTS2’s high-resolution, 4.3 inch color screen allows users to see what’s going on behind them with the Edge camera connected. Features: License plate mount • Adjustable Camera Angle • Parking Guide Lines • Night Vision LEDs • Waterproof Quick and Easy Installation to connect to any Attitude CTS, Evolution CTS2 or Insight CTS2 • Extended RCA, Power and Ground Cables to make installation easier

The “Insight” Color Touch Screen 2 (CTS2) has a high-resolution, 5-inch screen to monitor the performance of your ‘96-‘18 OBD-II equipped truck.

EDGE-98202: $199.95

**CTS2 monitor not included with purchase of camera.

‘96-‘18, EDGE CTS2 EDGE-84130: $429.95

‘96-‘18, EDGE CS2 EDGE-84030: $299.95

At Geno’s we have used analog gauges in our Turbo Diesel trucks, but the concept of having multiple gauges that do not require fancy gauge mounts and a lot of underhood tinkering really appeals to us. The voice of experience screams out, “It can’t be any easier than plug-and-play using the OBD-II port.” And, plug-and-play we did. We love the CTS2 (and now the CS2) as it gives you up to eight data items that you can keep track of on the screen.

**Compatible with ‘14-‘16 Ram 1500 EcoDiesel.** See our website for information about data and accessories.

For more information about the operation of the Insight CTS2 and CS2 along with a complete listing of vehicle parameters, visit the EDGE Products website at: www.edgeproducts.com

‘06-‘09 EDGE-38505: $50.97 ‘03-‘05 EDGE-38504: $50.97 ‘98.5-‘02 EDGE-38503: $50.97

Adapter kit included. NOTE: The pod is molded in a charcoal/agate color. If necessary, it can be painted to match the dash in your truck.

NOTE: Limited data available on ‘96-‘07, 5.9L trucks.

The “Insight” CS2 has all of the same capabilities as the CTS2, but has a smaller 2.4-inch screen high-resolution screen with button-control screen.

CS/CS2/CTS/CTS2 Dash Pod

Put your EDGE on the dash of your truck in a dash pod that won’t warp or deform over time. Pod is angled for easy viewing.

GAUGES, GAUGE MOUNTS & ACCESSORIES

I

BEST VALUE!

CS/CS2/CTS/CTS2 EAS EGT Kit (Daily Driver/ Tow Kit) EDGE-98620: $119.95

This kit is ideal for the daily diesel driver or if you are towing then it’s a must have! Towing can put a lot of strain on the truck and make it run hot. Don’t be left on the side of the road with an overheated truck because you didn’t watch your EGTs. (Includes EAS Starter Cable and EAS Temperature Probe.)

Catalog good through October 2018 l Prices subject to change without notice.

CS/CS2/CTS/CTS2 A-Pillar Mount

‘10-‘18 EDGE-38405: $66.26 ‘03-‘09 EDGE-38406: $79.97

If you want a color-matched A-Pillar mount, no competitor matches EDGE. Will not warp or deform. Adapter kit included.

Order 770-886-2500 or genosgarage.com

l7


GAUGES, GAUGE MOUNTS & ACCESSORIES

We carry ISSPRO Performax gauges. See our website for a complete list of applications.

DESCRIPTION

EV2 GAUGES R30000 SERIES BLACK/WHITE FACE

EV2 GAUGES WHITE FACE

EV2 GAUGES BLACK FACE

BLACK FACE

BLACK FACE

WHITE FACE

WHITE FACE

Colored Lettering White Illumination Red Indicator

White Lettering White Illumination Red Indicator

Black Lettering Green Illumination Red Indicator

Blue Lettering Blue Illumination Lt. Blue Indicator

White Lettering Blue Illumination Red Indicator

Black Lettering Green Illumination Red Indicator

White Lettering Green Illumination Red Indicator

2” Boost Pressure • 0-100 psi

ISS-R30433

*ISS-R14433

*ISS-R17433

**ISS-R5643R

2” Boost Pressure • 0-60 psi

ISS-R30233

*ISS-R14233

*ISS-R17233

**ISS-R5623R

**ISS-R6823R

**ISS-R6723

2” Boost Pressure • 0-40 psi

ISS-R30333

*ISS-R14333

*ISS-R17333

**ISS-R5653R

**ISS-R6853R

**ISS-R6753

**ISS-R5613R

**ISS-R6813R

**ISS-R6713

2” EVA Mechanical Fuel Pressure • 30 psi

ISS-R5604R

ISS-R6804R

ISS-R6704

2” EVA Mechanical Fuel Pressure • 60 psi

ISS-R5607R

2” Exhaust Gas Temperature • 100°-1500°

ISS-R3607GR

ISS-3807GR

ISS-R3707G

I

$145.00

(*1/8 NPT sending unit / **10 Foot Tubing)

$138.00

$145.00

(*1/8 NPT sending unit / **10 Foot Tubing)

$138.00

$145.00

(*1/8 NPT sending unit / **10 Foot Tubing)

$138.00

$138.00 $138.00

$69.00

$138.00

$69.00

2” Boost Pressure • 0-30 psi

(**10 Foot Tubing)

$65.00

Electric Fuel Pressure • 0-40 psi *

ISS-R30055

ISS-R14055

ISS-R17055

Electric Fuel Pressure • 0-30 psi *

ISS-R30033

ISS-R14033

ISS-R17033

(1/8 NPT sending unit; Wiring harness)

$156.00

(1/8 NPT sending unit; Wiring harness)

$138.00

$145.00

$138.00

ISS-R30288

(‘03-‘07, 5.9L only.)

Electric Fuel Rail Pressure • 0-30,000 psi*

(Wiring harness)

ISS-R30289

(‘07.5-‘12, 6.7L only.)

$195.00

Oil Pressure • 0-100 psi

ISS-R14288

(‘03-‘07, 5.9L only.)

ISS-R14289

$65.00

$69.00

$65.00

ISS-R17288 ISS-R17289

ISS-R14211

ISS-R17211

$195.00

$138.00

$148.00

$154.00

$148.00

$148.00

(Includes isolator and 8’ tubing kit)

$189.00

(1/8 NPT, Adj. Short, High Temp. K-Series Probe)

2” Exhaust Gas Temperature • 0°-1600°

H TDR74, p8-10 ISS-R14022 ISS-R17022

ISS-R30022

$172.00

(1/8 NPT, Adj. Short, High Temp. K-Series Probe)

*Gauge face color-coded for Post-Turbo install (R3607)

PRE or POST turbo

2” Exhaust Gas Temperature • 0°-1600°

(1/8 NPT, Adj. Short, High Temp. K-Series Probe)

$171.00

PRE or POST turbo

PRE or POST turbo

$189.00

*ISS-R14021

*ISS-R17021

*0-1500° ISS-R3607TR

$171.00

2” Tachometer • 4,000 RPM

$189.00

$189.00

*0-1500° ISS-R3607VWR

$171.00

$171.00

*Gauge face color-coded for Pre-Turbo install (R3607)

$189.00

ISS-R5503

(Magnetic Sensor required. See ISS-R8912 below.) *Note: This gauge has a White indicator.

$158.00

Connects factory wiring harness to ISSPRO gauge wiring harness for the 2” tachometer (ISS-R5503). ISS-R8912-92: $36.95

2” Tachometer • 3,000 RPM

ISS-R5501

(Magnetic Sensor required. See ISS-R8912 below.) *Note: This gauge has a White indicator. Magnetic Sensor

$69.00

$69.00

(‘03-‘07, 5.9L only.)

(Includes isolator and 8’ tubing kit)

Tach to OEM Wiring Harness (‘92-‘93) (Built after 6/1/92)

$69.00

$138.00

(‘07.5-‘12, 6.7L only.)

$138.00

(1/8 NPT sending unit; Wiring harness)

$69.00

$138.00

(‘07.5-‘12, 6.7L only.)

$195.00

**ISS-R6743

$69.00

$180.00

Required magnetic sensor for the Tachometer Gauge Installation Kit for Tachometer Gauge (ISS-R5501).  ISS-R8912: $54.95

2” Transmission Temperature 140°-320° • Full-Sweep (Includes 1/8 NPT sending unit) 2” Transmission Temperature 100°-280° • Full-Sweep (Includes 1/8 NPT sending unit) Optional Wiring Harnesses

ISS-R14566

ISS-R17566

ISS-R5656R

ISS-R14599

ISS-R17599

ISS-R5659R

$106.00

ISS-R30599 $106.00

$106.00

$106.00

$106.00

EV2 Lighting Wiring Harness ISS-R72022: $24.95

ISS-R6756

$119.00

$119.00

$119.00

ISS-R6859R

$119.00

ISS-R6759

$119.00

ISSPRO Wiring Harness  3.5 foot harness fits between amplifier box and gauge in EV pyrometers and transmission temperature.  ISS-R7799: $11.95

Attribute Programmer for EV2 & Performax

Programmer is used to activate a pre-installed warning light on EV2 gauges, and to adjust the point at which the light illuminates. Please see our website for details or call our Tech Line.  ISS-R82003: $31.95

Chrome EV Gauge Bezel Cover

2-1/16” Chrome bezel for ISSPRO EV guauges. Will NOT work on EV 2 gauges.  ISS-R7754: $6.95

*The fuel pressure gauges may require additional hardware depending on application. See page 22 for hardware.

8 l Ram Turbo Diesel Parts & Accessories  #101

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


Full A-Pillar Triple and Dual Covers TRIPLE FULL PILLAR  I ‘10-‘18 (Color-Matched) ‘03-‘09 (Color-Matched) ‘98-‘02, w/tweeter (Black only) ‘98-‘02, w/o tweeter (Black only) ‘94-‘97 (Black only)

GM-DG-17219: $89.95 GM-DG-17213: $89.95 GM-DG-17205: $79.95 GM-DG-17203: $80.95 GM-DG-17201: $79.95

‘10-‘18

‘03-‘09

DOUBLE FULL PILLAR  I ‘10-‘18 (Color-Matched) ‘03-‘09 (Color-Matched) ‘98-‘02, w/tweeter (Black only) ‘98-‘02, w/o tweeter (Black only) ‘94-‘97 (Black only)

GM-DG-17218: $85.95 GM-DG-17212: $88.95 GM-DG-17204: $79.95 GM-DG-17202: $76.95 GM-DG-17200: $76.95

Gauge mounts for ‘03-‘09 trucks available in custom-colored molded plastic (not painted) for an exact match. ‘10-‘18 matches very closely, but not 100%. ‘94-‘02 model years come in molded black plastic that can be custom-painted to match the interior.

Steering Column GAUGE Mounts  I

DUAL Mount Steering Pod (‘10-‘18) SINGLE Mount Steering Pod (‘10-‘18) DUAL Mount Steering Pod (‘03-‘09) SINGLE Mount Steering Pod (‘03-‘09)

‘89-‘02 GM-DG-15017:  $44.95 GM-DG-15015:  $39.95 GM-DG-15014:  $45.95 GM-DG-15013:  $39.95

SINGLE Mount Steering Pod (‘89-‘02) GM-DG-15012:  $39.95

Available in Black only.

(Dual mount not available for ‘91.5-‘02.)

MOPAR Single A-Pillar Replacement, ‘03-‘09 GM-DG-ZL39TL2:  $66.95

When we found this MOPAR A-pillar with the molded-in single gauge pod (used in the SRT-10 Ram truck), we were impressed. This A-pillar replacement is molded in the correct texture and color. Includes gauge pod, and the grab handle. It works perfectly with any standard 2” gauge. NOTE: Reuse factory A-pillar screw hole covers. Not included with gauge mount.

AutoMeter single and a dual steering column pods put the gauges right in front of you in an easy to see location. These gauge mounts are a cover and attach to the existing steering column cover. Molded in black plastic, they can be painted to match your truck’s interior. Receives most standard 2” gauges.

You can find additional gauge pods for your Ram truck on our website.

Available in Black only.

‘03-‘09

GAUGES, GAUGE MOUNTS & ACCESSORIES

GET A GAUGE MOUNT AT HALF PRICE!

“Do you guys offer a gauge kit or package?” Nope, too many custom configurations. So, better than a kit, we let you choose gauges and buy 1, 2 or 3 gauges from us and get the corresponding gauge mount at half the price.

‘98-‘02

Gauge Gizmo  I

Dual Pod (Black only) ‘98-‘02 GM-DG-15203: $38.95 ‘94-‘97 GM-DG-15200: $39.95 ‘86-‘93 GM-DG-15198: $39.95 Single Pod  (Black only) ‘10-‘18 GM-DG-P81038: $32.95

Can be modified to work on ‘10-‘18 trucks. See TDR 81, pg. 39 Dash Pods  I

TRIPLE GAUGE PODS ‘03-‘09 GM-DG-15020:  $57.95 ‘98-‘02 GM-DG-15002:  $64.95 DUAL GAUGE POD ‘03-‘09 GM-DG-15019:  $54.95 UNIVERSAL TRIPLE GAUGE POD ALL GM-DG-5288:  $104.95

Some trimming of the base required.

‘03-‘09 GM-DG-15212: $30.95 ‘98-‘02 GM-DG-15204: $30.95 ‘94-‘97 GM-DG-15201: $31.95 ‘86-‘93 GM-DG-15199: $30.95

These single or dual pod mounting brackets are a custom way to mount gauges. The Gauge Gizmo puts your preferred gauge up high on the A-pillar of your truck. Gauge Gizmos come in molded black plastic and can be custom painted to match your truck’s interior.

These gauge pods mount on top of the dash almost flush against the windshield for a nice, non-obtrusive view. The dash pod is molded in black plastic, but can be painted to match your truck’s interior color.

UNIVERSAL In-Dash gauge Installation Back-Plates

Universal Donut Mount Kit

‘99-‘02 GM-DG-01FACE9902:  $7.50 ‘94-‘97 GM-DG-01FACE9497:  $5.50

GM-1DONUT:  $23.50

Rubber mounting assembly for below the dash installation.

‘03-‘09

‘99-‘02

‘94-‘97

Catalog good through October 2018 l Prices subject to change without notice.

For a custom in-dash look, we offer a black Lexan back-plate that fits into the cubby hole in the dash.

2” Gauge Mount Plug

GM-PLUG:  $3.00/each

The gauge mount plug covers the opening of unused holes in gauge mounts.

Order 770-886-2500 or genosgarage.com

l9


INTERIOR PARTS & GAUGE ACCESSORIES

Acu Temp Adapter (‘89-‘18, 5.9L & 6.7L)  I ACUTEMP_ADAPTER:  $32.00

PPP-70107

PPP-70103

7-Circuit Auxiliary Fuse Block PPP-70107 Standard:  $80.99 7 Circuits (4 ignition hot/3 constant/max 40 amp) PPP-70117 Standard:  $105.95 7 Circuits (7 ignition hot/max 80 amp) PPP-70207 Weather-Resistant:  $95.99 7 Circuits (4 ignition hot/3 constant/max 40 amp) PPP-70217 Weather-Resistant:  $110.99 7 Circuits (All ignition hot/10 amp)

3-Circuit Auxiliary Fuse Block PPP-70103:  $67.99

A lower-cost alternative to the 7-Circuit kit. (1) constant-hot; (2) ignition-hot circuits. Uses one 30 amp relay.

The Acu Temp Adapter allows you to install any 1/8 NPT temperature sender on your cooler line. It takes less than five minutes to install over the cooler line. MICRO You never have to touch the transmission FUSE KIT fluid, so you have no concern over fluid GG-FUSEMICRO: $21.95 contamination. NOTE: Experience has shown that the temperature readings us- Try finding these micro fuses at any outlet other ing this adapter are 30° cooler than temperatures in the pan. than a Ram dealer. Good luck. We heard you loud and clear. Here is our micro fuse kit for newer Ram trucks includes two each of the following micro fuses: 5 amp • 10 amp • 15 amp • 20 amp • 25 amp • 30 amp Boost Adapter

(‘98.5-‘18)

And M case time delay fuses: 20 amp • 25 amp • 30 amp

RLT_ADAPTER:  $7.50  I Works with 5.9L & 6.7L engines.

Access the pressurized intake air system with this adapter for use with a boost gauge. Remove an intake manifold bolt, replace it with our Boost Adapter that has a hole in it, and you now have access to pressurized air.

No doubt, you’re going to add accessories to your truck. As a solution to those unorganized, haphazard accessory wiring situations, add a Painless Performance auxiliary fuse block for a clean installation.

RELAY-KIT:  $15.95

Have you been caught in the middle of an electrical project and found that you need a weatherproof relay kit (specifically the female receptacle with electrical pigtails and molded plastic covering the underside’s leads)?

3-Circuit Weather-Resistant Fuse Block PPP-70203:  $83.99 (Includes cover for fuses)

Weatherproof Relay Kit

3 Circuit Top Tap Connector

3CIRCUIT_TOP_TAP:  $1.99

Provides easy access to power for all of your truck accessories.

Problem solved. Here is a Hella-branded SPDT, 30 amp, weatherproof relay kit.

Rattlestop Dashboard Reinforcement Tabs (‘94-‘02)

OEM Replacement A-Pillars (‘03-‘09)

DRIVER SIDE MOP-1TE75B1AA:  $56.95 PASSENGER SIDE MOP-1TE74TL2AA:  $56.95

Replace a broken A-pillar with this Mopar OEM replacement. It is color-matched and does not require painting.

‘98-‘02 DASH-9803:  $21.95 ‘94-‘97 DASH-9397:  $21.95

Replacement A-PillarS (‘03-‘09)

Modern dashboards are made from plastic which becomes brittle and fatigued over time. Decrease dash rattles and increase structural rigidity with these reinforcement tabs. Reinforcement tabs only work with OEM dash.

DRIVER SIDE DRM-97631:  $49.95 PASSENGER SIDE DRM-97630:  $49.95

Easy to install and durable, offering an exact fit that matches the original handle.

TEMPERATURE Control Knob ASSORTMENT (‘94-‘97) DRM76829:  $9.95

A-Pillar Grab Handle NOTE: This repair kit will Repair Kit, (‘03-‘09) only work if the mountDRIVER AND PASSENGER SIDE IMCO_RPR_KIT:  $46.00 DRIVER SIDE ONLY IMCO_RPR_SINGLE:  $25.00

Instrument Cluster Air Outlets, ‘98-‘02

ing base is split. It will not work if the base is completely broken off of the A-pillar.

The A-pillar grab handle in ‘03-‘09 Ram trucks is a known weak spot in the interior. Put too much weight on it and the mounting points will break.

Instrument Cluster Bezel Mounting Clip (‘98-‘02) 13 clips required.

LEFT 5014842:  $51.95

06504067:  $2.75 each CENTER LEFT 5014841: $60.95

Replacement Dash Panel Plastic Snap-in Nut (‘94-‘09)

This Grab Handle Repair Kit has aluminum bushings that reinforce the mounting points to help prevent the grab handle from breaking or to repair one that is already broken.

4 required per dash.

6504485:  $5.95 each CENTER RIGHT 5014840: $61.95

10 l Ram Turbo Diesel Parts & Accessories  #101

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


H TDR82, p14-19: Replacing Your Cracked Dash, ‘98.5-‘02

Oversize shipping rates apply to this item.

AFTERMARKET Replacement Dashboard (‘98-‘02, 3500/2500/1500) ‘98-‘02, 3500/2500 & ‘98-‘01, 1500 DRD8-2:  $259.95

Replacement DashboardS (‘94-‘05, 2500/3500)

Dash available in Black only. Can be custom-painted to match truck interior color.

NEW!

‘03-‘05 DASHBOARDS UPPER REAR DASHTOP

($40 flat shipping fee to continental U.S.)

Covers vent area next to windshield.

This is a full replacement dashboard. This is not a cover. It is made with a heavy-duty ABS plastic that is designed to help keep the sun from making it crack like the original dashboard. This Dodge Ram dash is more durable than the original OEM part. The dash cover is only available in black and we recommended that you paint it to match the interior color in your truck. The ‘98-‘02 dashboard is made for us to our specifications and are typically in stock here at our warehouse. Please allow 21 days for delivery. The dashboards may require some light trimming to fit. It is not a job for a novice, but is one that goes hand-in-hand with a heater core replacement.

SLATE GREY (DV)  DRD3-MOP-REAR-SL:  $Call TAUPE (L5)  DRD3-MOP-REAR-TP:  $Call UPPER FRONT DASHTOP SLATE GREY (DV)  DRD3-MOP-FRONT-SL:  $Call TAUPE (L5)  DRD3-MOP-FRONT-TP:  $Call

‘98-‘02 DASHBOARDS AGATE (LAZ)  DRD8-MOP-AGATE:  $Call CIRRUS/MIST GREY (RC8)  DRD8-MOP-MGREY:  $Call SUEDE/CAMEL (VK9)  DRD8-MOP-CAMEL:  $Call

Please call before ordering this replacement dash if you have installation questions.

INTERIOR PARTS & ACCESSORIES

Dash texture is not an exact match of the OEM dash.

‘94-‘97 DASHBOARD SLATE GREY (DV)  DRD4-7-MOP:  $315.00

NOTE: Call for price and availability for ‘98-‘05 dashboards. We hate it when the catalogs don’t give you the data you need to make a buying decision, but we had to get this catalog to the printer before we got the pricing. We anticipate the pricing to be very competitive. Please give us a call or check our website.

‘03-‘05

The dashboards may require some light trimming to fit. It is not a job for a novice, but is one that goes hand-in-hand with a heater core replacement. Please call before ordering a replacement dash if you have installation questions.

‘98-‘02 NOTE: We recommend replacing the old heater core and A/C evaporator at the same time as dash replacement. See page 18.

Instrument Cluster Bezel ‘99-‘02, 2500/3500, ‘99-‘01, 1500  68042746AC :  $219.00

This OEM instrument cluster bezel replaces your broken cover perfectly. NOTE: New mounting clips should be used to install this bezel. Order #06504067 or re-use original clips.

‘94-‘97 Rigid Plastic Dashtop Cover (‘94-‘05, 3500/2500/1500) ‘03-‘05, 2500/3500 ‘02-‘05, 1500 DASHTOP-999:  $179.00

‘98-‘02, 2500/3500 ‘98-‘01, 1500 DASHTOP-998:  $179.00

Available in Black only. Can be custom-painted to match truck interior color.

‘94-‘97, 3500/2500/1500 DASHTOP-997:  $179.00

From time to time, we get calls from truck owners looking for an affordable, high-quality dash replacement or cover to hide those unsightly cracks that inevitably occur in extreme weather conditions. When Palco Industries, Inc. approached us with their new line of DashTop dash covers for ‘94-‘05 Dodge Ram trucks, we ordered one and installed it on one of our trucks. We were pleased to find that the installation was easy, the fit was good, and the cost was reasonable. Silicone adhesive is included.  P lease allow for a minimum of 21 business days delivery time on replacement dash-

boards and dashtop covers. Additional shipping charges apply to dashtop systems shipping to Alaska and Hawaii.

Dash Instrument Bezel Cover Overlay ‘94-‘97, 2500/3500 PALCO_BEZ2:  $139.95

If the dash bezel in your ‘94-‘97 Ram truck is damaged, you can now affordably repair it with this plastic overlay from Palco. Simply place this bezel cover over the existing one and you are ready to go. Installs in minutes. Silicone adhesive is included. NOTE: This bevel cover will require trimming to fit. It will not be as nice as the original cover, but it’s less than half the price of an OEM replacement from your local Dodge dealer.

Catalog good through October 2018 l Prices subject to change without notice.

Order 770-886-2500 or genosgarage.com

l 11


INTERIOR PARTS & ACCESSORIES

INTERIOR Cabin Filter Kit (‘10-‘18)

CABIN FILTER KIT V   I   H TDR74, p48-49 GG-CFF1012:  $29.95 REPLACEMENT CABIN FILTERS ‘10-‘18 CHARCOAL NA-4578:  $14.95 ‘16-‘18 OEM 68406048AA:  $17.95 NEW!

Are you getting poor airflow from the HVAC system or are you simply wanting to keep the interior dust-free in your truck? Add this cabin air filter with charcoal filter prior to the HVAC blower motor box to keep the honeycomb grill that covers it free of blockage caused by excess dust.

Dash MATS

Looking for a dash cover to protect your dashboard from the summer heat? Whether it is an ULTIMAT Dash Mat or a DASHMAT Carpet Dash Mat, this is the answer to the hot sun. The texture of the dash cover allows you to store items on top of the dash and not worry about them rolling around.

Installing this filter is an easy project. To install the filter into the interior air box requires the use of a either a hot butter knife (box cutter heated with a torch) a Dremel tool with a cut-off wheel; or a small saw blade to cut the opening shown in the included instructions. Our installation instructions describe the steps in detail. You’ll cut out an opening in the dash, slip the filter into the slot, and close it off with a Mopar filter door. NOTE: Some ‘16-‘17 trucks may already have the filter kit installed. You may only need a replacement filter. Check before ordering.

Other cabin filter kits are available on page 20.

Your choice of colors: WINDSHIELD SUNSHADE Black

Mocha

Beige

Gray

Billet Aluminum Door Locks (‘03-‘09)

The ULTIMAT DASH COVER is a semi-rigid carpet cover molded to the exact shape of the dashboard, resulting in a perfect fitting cover with no stitching. ULTIMAT Dash Covers:  $52.00 Specify Black, Mocha, Beige or Gray when ordering.

BILLET_LOCK:  $13.95

This pair of billet aluminum door locks are a neat and rugged interior upgrade.

‘10-‘18

Black, Mocha, Gray

ULT9184000

‘10-‘18

Black, Mocha, Gray

ULT9184001

‘06-‘09

Black, Mocha, Gray

ULT9170100

‘03-‘05

Black, Mocha, Gray

ULT9154100

‘98-‘02

Black, Beige, Gray

ULT9088600

‘94-‘97

Black, Beige, Gray

ULT9053100

‘81-‘93

Black, Beige, Gray

ULT9055600

We tried all four colors of the UltiMat and DashMat. We strongly suggest the black dash cover as it does not glare into the windshield.

*Will not work with heated steering wheel option. *Please check steering wheel size before ordering. Fits 15-1/2” x 4-3/8”.

‘05-‘11

‘89-‘97

DASHMAT Dash Cover:  $32.00 Specify Black, Mocha, Beige or Gray when ordering.

The outward-facing surface is high-quality silver reflective fabric; the inside is soft pellon felt. Both fabrics are laminated to a stiff foam board which acts as an insulator to reduce heat build-up.

Wheelskins Applications ‘12-‘18*

‘98-‘04

The DASHMAT DASH COVER is a flexible polycarpet, stitched cover that is cut to follow the contour of the dash.

Keep the interior of your truck cooler and protect the dash from harsh UV rays with a UVS heat shield by Covercraft.

The laminated stiff board is what makes this item perfect for longer term, RV-type parking. For short trips, the board’s accordion-like folds make removal/installation easy.

ULTIMAT Dash Cover

w/Alpine speakers

‘10-‘18, 2500/3500 ‘09-‘18, Ram 1500 CI-11150: $49.43 ‘03-‘09, 2500/3500 CI-10804: $49.43 ‘94-‘02, 2500/3500 CI-10558: $49.43 Heat Shield Storage Bag - Universal Kit ZUBAGV6: $6.95

BLACK

WSS01-01

GRAY

WSS01-14

SAND

WSS01-18

BLACK

WS102C-01

GRAY

WS102C-14

SAND

WS102C-18

BLACK

WS102XX-01

GRAY

WS102XX-14

SAND

WS102XX-18

BLACK

WS102X-01

GRAY

WS102X-14

SAND

WS102X-18

The cover is removable and hand washable.

Black, Mocha, Gray

DM184000

‘06-‘09

Black, Mocha, Gray

DM170100

‘03-‘05

Black, Mocha, Gray

DM154100 DM088600

‘98-‘02

Black, Beige, Gray

‘94-‘97

Black, Beige, Gray

DM053100

‘81-‘93

Black, Beige, Gray

DM055600

NOTE: ‘10-‘18 dashmat does not have speaker cutouts for Alpine stereo system.

12 l Ram Turbo Diesel Parts & Accessories  #101

All Colors/Years:  $43.95

Wheelskins Genuine Leather Steering Wheel Covers are some of the finest wheel covers you’ll find anywhere. They are hand-crafted in California from choice domestic cowhide and their exclusive patented lacing hole reinforcement design ensures a tight custom fit on any steering wheel. They are easy to install and are a perfect fit on your Turbo Diesel steering wheel.

Elbow Friend

STANDARD SIZE (8.5”L x 3W”) ELBOWFRIEND-STD: $19.99/pair JUMB0 SIZE (10”L x 3W”) ELBOWFRIEND-JMB: $29.99/pair

DASHMAT Dash Cover ‘10-‘18

Wheelskins

Available in Black color only.

Here is the problem: you have a truck with the same ole hard plastic door panel and it’s uncomfortable as an arm rest. Here is the quick, easy and affordable answer: Elbow Friend. It is a comfortable pillow covered with durable fabric. We found the standard size to work well for most people, but a jumbo size is available too. They are sold in pairs, so your passenger can also ride in comfort.

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


‘13-‘18 CUP-HOLDER-DBL: $49.00 ‘13-‘18 CUP-HOLDER-13M: $49.00

For trucks with G56 manual transmission only.

‘03-‘12 CUP-HOLDER-03:  $49.00

(Does not fit trucks with Captain’s chairs and the big factory center console.)

‘98-‘02 CUP-HOLDER-9802:  $49.00 ‘94-‘97 CUP-HOLDER-9497:  $49.00

‘13-‘18

‘03-‘12

‘13-‘18

G56

Automatic

Increase the storage capacity of the center console and help avoid messy liquid spills in the interior of your truck with our handy cup holder. It is installed in minutes to the existing console. This cupholder will only work with the console pictured!

The Cupholder is form fitted to the inside diameters of the console and is designed so that it does not interfere with shifting in manual transmission trucks. Cup wells are 4” deep. Upper diameter: 3-3/4”. Lower diameter: 2-3/4”. The cup wells have a slot for a coffee mug handle.

‘94-‘97

Installation instructions are included.

Use a single self-tapping screw or velcro (included with the cup holder) to install the cup holder. The Cupholder attaches to the inside of the console. Some minor adjustments might be necessary to the console to get the lid to close properly.

CENTER CONSOLE LID KIT (‘03-‘05) GRAY  DRM924876:  $229.95 TAUPE  DRM924877:  $229.95

Restore functionality of your Dodge Ram’s center console lid with a Center Console Kit. Includes all the materials and hardware needed to complete the repair.

Accessory/ CB Mount (‘94-‘09)  I

‘98-‘02

Door Pocket Drink Holder (‘10-‘18) DRIVER SIDE 1LD23XXX-AA:  $42.95 PASSENGER SIDE 5NN24XXX-AA:  $20.95

Does your truck have this spiffy foam rubber insert in the truck’s side door pocket? If it doesn’t, get this one by Mopar to hold your things.

INTERIOR PARTS & ACCESSORIES

Center Console Cupholders  I

‘13-‘18 ‘Double Cup’ Cupholder

‘03-‘09 WD_CB_0309: $49.00 ‘94-‘02 WD_CB1: $49.00

The mounting bracket uses the existing center seat bolts to hold it in place. The mounting surface for an accessory is 13” wide by 4.5” tall.

‘03-‘09

To attach your accessories/CB, you drill holes through the mount to correspond with the attachment points of your accessory/CB. This mount allows the use of the dash mounted cup holder and has clearance for the 4WD lever.

NOTE: In ‘03-‘09 trucks, the mount may interfere with the lower seat compartment handle.

The CB face, in most cases, will be flush with the vinyl/cloth line at the seat front. The bracket is painted satin black for rust protection. NOTE: May not work with large CBs in trucks equipped with a manual transmission. Check for clearance.

‘94-‘02

NOTE: Fits ‘06-‘09 with 40/20/40 seats only.

Console Vault – Combination Lock ‘10-‘18 Trucks

Cup Holder (‘98-‘02) GRAY 5FR421C8AE:  $189.00 AGATE 5FR421AZAE:  $189.00

Replacement cup holder for Ram 2500/3500 trucks with an automatic transmission.

Custom ‘CUMMINS’ Shift Knobs (‘89-‘18)

Any of these custom CUMMINS shift knobs will do an outstanding job of dressing up your truck’s interior. They fit both the transmission and/or the transfer case shifter. The shift knobs measure 2” round (the approximate size of a cue ball), a comfortable size for your hand. Threaded insert is M10 x 1.5mm.

‘CUMMINS Dependable DIESEL’

with Bucket full floor console.

CONSOLE_1028C:  $269.00 ‘06-‘18 Trucks  (40/00/40) CONSOLE_1010C:  $269.00 ‘03-‘05 Trucks  (40/00/40) CONSOLE_1004C:  $269.00

SHIFT_RETRO1_RED:  $49.95 SHIFT_RETRO2_BLACK:  $49.95 SHIFT_RETRO3_SILVER:  $49.95

‘06-‘18 40/20/40

Console Vault – KEYED Lock

‘CUMMINS C’

‘03-‘05

SHIFT_C_RED:  $49.95 SHIFT_C_BLACK:  $49.95 SHIFT_C_SILVER:  $49.95

40/20/40

‘10-‘18 Trucks

with Bucket full floor console.

CONSOLE_1028K:  $269.00 ‘06-‘18 Trucks  (40/20/40) CONSOLE_1010K:  $269.00 ‘03-‘05 Trucks  (40/20/40) CONSOLE_1004K:  $269.00

‘10-‘18

with Bucket full floor console.

We offer this sturdy 12-gauge cold rolled plate steel security drawer (mounts in console lower compartment) for the ‘03-‘18 trucks. The Console Vault offers the best in center console property protection.

Catalog good through October 2018 l Prices subject to change without notice.

‘Cummins C Power’ SHIFT_KN_R (RED):  $49.95 SHIFT_KN_S (SILVER):  $49.95 SHIFT_KN_B (BLACK):  $49.95

Order 800-755-1715 or genosgarage.com

l 13


INTERIOR PARTS & ACCESSORIES

Floor Liners Husky Liners are custom fitting floor mats with a raised lip designed to fit the complex contours of your Dodge Ram truck’s carpeted floor areas. The mats have a 3/4” lip on the outside to catch liquid, dirt and trash.

Cummins “C” Logo Floor Mats

Custom floor mats are typically in the $75-$95 range, but we’re pleased to offer you Avery’s custom floor mats with the “C” logo at very competitive prices. These mats are 24-ounce nylon, and the “C” logo really stands out. The carpet colors match the MOPAR factory mats.

2-piece Front Liners  (Includes Driver and Passenger mats.) ‘03-‘09, 2500/3500 All Cabs ‘94-‘02, Reg/Quad/Club/Extended Cab

Black mats have White logos. Gray and Neutral mats have Black logos.

Black, Gray

HL-3085A

Black, Gray, Tan

HL-3071

1-piece Rear Liner  (Covers entire rear floor area.) ‘06-‘09, 2500/3500 Mega Cab

Black, Gray

HL-6085

‘03-‘09, 2500/3500 Quad Cab

Black

HL-6081

‘98-‘02, 2500/3500 Extended Cab

Black, Gray

HL-6172

‘98-‘02, Quad Cab

Black, Gray

HL-6171

1-piece Center Hump Liner  (Automatic transmission trucks only.) ‘03-‘09, 2500/3500 Reg/Quad/Mega ‘98-‘02, 2500/3500 Reg/Quad/Ext

Black, Gray

HL-8371: $59.95

Black

HL-8271: $54.95

 eatherBeater W Floor Mats

Heavy-Duty Floor Mats

2-PC. FRONT FLOOR MATS:  $64.95 ‘13-‘18, Std., Quad, Mega Cab AV-4268F (Black or Gray) ‘13-‘18, Crew Cab AV-4289F (Black or Gray)

‘03-‘09, All Cab Styles AV-1646 (Black or Gray)

‘10-‘12, All Cab Styles AV-3067F (Black or Gray)

‘94-‘02, All Cab Styles AV-1188 (Black, Gray or Neutral)

These Husky Liners heavy-duty floor mats offer year round protection for the carpeting in your truck. They feature 3/8” high ridges, an extra thick driver’s heel pad for longer life and guaranteed by the manufacturer not to crack or break. Theses custom fit floor mats feature “SPIN” – Stay-Put-Nibs on the back to limit slipping. Lifetime Guarantee against cracking and breaking.

Husky Liners brand WeatherBeater™ Floor Liners offer superior carpet protection against mud, spills and mess with a fresh appealing design that complements your truck’s interior. Available in Black, Gray, or Tan. #8371 not available in Tan.

2-piece Front Mats

(Includes Driver and Passenger mats.)

Available in Black, Gray, or Tan.

2-pc. Front Mats

‘03-‘18, 1500/2500/3500 Reg. Cab

HL-1803

‘10-‘18, 2500/3500 Mega Cab

HL-1800A

‘10-‘18, 1500/2500/3500 Crew Cab

HL-1800

‘06-‘09, 2500/3500 Mega Cab

HL-1803A

‘03-‘09, 2500/3500 Quad Cab

HL-1803C

‘10-‘18, All cab styles.

HDFM-5122

‘14-‘17, Ram 1500 Quad Cab

HL-1803B

‘94-‘02, All cab styles.

HDFM-5104

2-pc. Front & 1-pc. Rear Kit (Rear mat only sold with these kits.)

2-pc. Rear Mats ‘03-‘18, All cab styles.

1-PC. REAR FLOOR MAT:  $53.95 ‘10-‘18, MEGA Cab only.  AV-4591G (Black or Gray) ‘10-‘18, CREW Cab only.  AV-3069G (Black or Gray) ‘06-‘09, MEGA Cab only.  AV-2566 (Black or Gray) All Cab Styles ‘03-‘09 AV-1649 (Black, Gray or Mocha) ‘98-‘02 AV-1158 (Black, Gray or Neutral) ‘94-‘97 AV-586 (Black, Gray or Neutral)

CALL US FOR AVERY CUMMINS “C” FLOOR MATS FOR YOUR FIRST GENERATION TRUCK (‘89-‘93).

14 l Ram Turbo Diesel Parts & Accessories  #101

Does NOT cover center hump.

‘94-‘02, All cab styles. Covers entire rear area. NO underseat storage.

HDFM-5202 HDFM-5201

$57.95 $70.95

Center Hump Liner ‘94-‘18, Universal Fit Does NOT fit Mega Cab.

‘10-‘18, 2500/3500 Crew Cab ‘09-‘18, 1500

HL-9900

‘10-‘18, 2500/3500 Mega Cab

HL-9904

‘03-‘09, 2500/3500 Crew Cab

HL-9803

‘09-‘17, Ram 1500 Quad Cab

HL-9901

1-piece Center Hump Liner HDFM-5300

(Automatic transmission trucks only.)

‘10-‘18, 2500/3500 Reg/Quad Cab ‘09-‘18, 1500 Reg/Quad Cab

HL-8371A

‘10-‘18, 2500/3500 Mega/Crew Cab ‘09-‘18, 1500 Crew Cab

HL-8370

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


Cloth

‘04-‘05

 Seat Cushions (‘94-‘18) I

‘10-‘18

• Upgraded foam lasts longer than OEM.

Cloth

DRIVER SIDE 2500/3500

PASSENGER SIDE 2500/3500

CLOTH SEATS ‘10-‘18 MOP-68050461: $176.00

CLOTH SEATS ‘10-‘18 MOP-68050462: $199.00 ‘06-‘09 MOP-5180020: $210.00 ‘04-‘05 MOP-5127750: $215.95 ‘03 MOP-5093780:  $121.00

LEATHER SEATS ‘10-‘18 MOP-68064271: $279.00 ‘06-‘09 Not available. ‘04-‘05 MOP-5140697: $189.00

DRIVER SIDE 1500

Leather

LEATHER SEATS ‘10-‘18 MOP-68064270: $279.00 ‘06-‘09 Not available. ‘04-‘05 Not available. ‘03 MOP-5093780:  $121.00

40/20/40 CLOTH & VINYL SEATS ‘06-‘08 MOP-5178109AA: $114.95 NEW!

Fits trucks with Occupant Classification System module under the seat cushion on driver side. NOTE: Does not fit Mega Cab trucks.

INTERIOR PARTS & ACCESSORIES

‘06-‘09

• Reinforcement on the bottom of the cushion where the seat meets the springs.

REPLACEMENT Seat Cushions (‘94-‘18) I

• Left side of cushion raised to prevent “left side lean.” Made in the USA

DRIVER SIDE SEAT CUSHIONS

‘98-‘02 Regular Cab GG-SCRC9801:  $125.00 Cloth, Vinyl & Leather

‘10-‘18 GG-SC1017:  $125.00 Cloth, Vinyl & Leather Non-ventilated

‘98-‘02 Quad Cab GG-SC9801:  $125.00 Cloth, Vinyl & Leather

‘10-‘18 GG-SCV1014:  $125.00 Leather & Ventilated

(Will not work on Regular Cab trucks.)

‘06-‘09 GG-SC0609CL:  $125.00 Cloth, Vinyl & Leather

‘94-‘97 Regular & Extended Cab GG-SC9497:  $125.00 Cloth, Vinyl & Leather

‘03-‘05 GG-SC0305:  $125.00 ‘03-‘05 Cloth, Vinyl & ‘03 Leather PASSENGER SIDE SEAT CUSHIONS

‘98-‘02 Quad Cab

‘98-‘02 Standard Cab

OEM-STYLE BOTTOM Seat COVERS (‘94-‘05)

NEW! NOTE: Not all colors available.

Replace a worn out bottom seat cover in your 1998 to 2005 Dodge Ram with these OEM-style replacement seat covers. These seat covers use the same style fabric top covers as the originals. Mopar offered many different materials for side panels (fabric; carpet and vinyl). We tried to match the most popular Mopar combinations. Therefore your side panels may differ in material. At the moment we do not have an option for Tan material. Seat backs coming soon. DRIVER SIDE

‘03-‘05 Quad Cab SLT, Electric, 40/20/40 - Trim Code M9DV Dark Slate/Vinyl & Carpet: HU-L03ADE-M9DV:  $215.00 ‘03-‘05 Quad Cab SLT, Manual, 40/20/40 - Trim Code V9DV Dark Slate/Vinyl & Carpet: HU-L03ADE-V9DV:  $215.00 ‘98-‘02 Quad Cab SLT, 40/20/40 - Trim Code R1AZ Dark Grey/Agate Vinyl: HU-L98QDX-R1AZ:  $185.00 ‘98-‘02 Quad Cab SLT, 40/20/40 - Trim Code R1C3 Light Grey Vinyl: HU-L98QDX-R1C3:  $185.00 ‘98-‘02 Standard Cab - Trim Code R1AZ Dark Grey/Agate Vinyl: HU-L98QDX-R1AZ:  $235.00 ‘98-‘02 Standard Cab - Trim Code R1C3 Dark Grey/Agate Vinyl: HU-L98QDX-R1C3:  $235.00 PASSENGER SIDE

‘03-‘05 Quad Cab SLT, Electric, 40/20/40 - Trim Code M9DV Dark Slate/Vinyl & Carpet: HU-R03APE-M9DV:  $215.00 ‘03-‘05 Quad Cab SLT, Manual, 40/20/40 - Trim Code V9DV Dark Slate/Vinyl & Carpet: HU-R03APE-V9DV:  $215.00 ‘98-‘02 Quad Cab SLT, 40/20/40 - Trim Code R1AZ Dark Grey/Agate Vinyl: HU-R98QPX-R1AZ:  $185.00 ‘98-‘02 Quad Cab SLT, 40/20/40 - Trim Code R1C3 Light Grey Vinyl: HU-R98QPX-R1C3:  $185.00 ‘98-‘02 Standard Cab - Trim Code R1AZ Dark Grey/Agate Vinyl: HU-R98QPX-R1AZ:  $235.00 ‘98-‘02 Standard Cab - Trim Code R1C3 Dark Grey/Light Grey Vinyl: HU-R98QPX-R1C3:  $235.00

Catalog good through October 2018 l Prices subject to change without notice.

‘98-‘02 Quad Cab GG-SCP9801:  $125.00 Cloth, Vinyl & Leather

‘94-‘97 Regular & Extended Cab GG-SCP9497:  $125.00 Cloth, Vinyl & Leather

Two years ago we introduced a driver’s side seat cushion for the ‘98-‘02 Dodge Ram trucks. Because of the Quad Cab/suicide rear door design of the truck, this cushion was infamous for its “left side lean.” Mopar had discontinued their expensive cushion ($200) and the only option we had was to to develop a seat mould and sell seats. We are pleased that our ‘98‘02 cushion is priced at $125, a big savings to you over the Mopar part. With the availability of the ‘98-‘02 cushion, we had an outcry from other Turbo Diesel owners that discovered the Mopar cushion for their truck(s) had also been discontinued. First it was the ‘94-‘97 guys, then the ‘03-‘05 customer, then the ‘06-‘09 customer with the cloth interior. We developed cushions for these applications and they’re in stock and also priced at $125. Most recently the ‘06-‘09 owners with leather trimmed seats asked for a Geno’s cushion. So, we upgraded our ‘06-‘09 cushion to work with leather, cloth and vinyl. Now we are into the newer Ram trucks. All of our seat cushions have upgraded foam which lasts longer than OEM. They are reinforced on the left side and underneath on the set base where the foam meets the spring. Instructions included.

Bottom Seat Cushion Cover, (‘98-‘02 Quad & Extended Cab) CHARCOAL SHG001PC-CH:  $45.00 TAUPE/TAN SHG001PC-TP:  $45.00

Did you also wear out the OEM fabric on your ‘98-‘02 seat? Here is a cost-effective replacement seat cover made from Khaki material. After all, you can’t sit on uncovered foam.

Bottom Seat Cushion Cover $35 with the purchase of seat cushion. Save $10.

Seat Heater Kit by Rostra ROSTRA-250-1870: $58.00 (each)

What do you do if you did not order the factoryinstalled, heated seats in your Dodge truck? The answer is a Rostra Controls seat heater kit. The heat elements warm up quickly and the twoposition switch allows for High/Low operation. Position of the heater elements requires removal of the seat covers. Install the heaters in the conventional manner (bottom and back) or stack the heating elements for a back-only heat. NOTE: This kit is not a replacement for OEM seat heaters.

Order 770-886-2500 or genosgarage.com

l 15


INTERIOR PARTS & ACCESSORIES - SEAT COVERS

Other Carhartt seat covers are available for ‘94-‘02 and ‘14 and up trucks. Please call us or check our website for applications.

FRONT SEAT STYLE/YEAR

COLOR/PART#

Laramie/Sport (‘14-‘18) Bucket seats with adjustable headrests and seat air bags. This seat configuration has a big factory console between the seats.

Brown SS-2476CA-BN

All Cabs (‘13-‘16) 40/20/40 seats with adjustable headrests, fold-down console w/3 cupholders & lid, seat airbag and without center storage.

Brown SS-3435CA-BN

All Cabs (‘13-‘16) 40/20/40 seats with adjustable headrests, fold-down console w/3 cupholders & lid, seat airbag and with center storage.

Brown SS-3438CA-BN

Reg/Mega/Crew/Quad (‘11-‘16) 1500/2500/3500 Bucket seat with adjustable headrests with seat airbag. Does not fit Laramie or Sport.

Brown SS-2459CA-BN

Laramie (‘12-‘13) Bucket seats with adjustable headrests. This configuration has a big factory console between the seats.

Brown SS-2450CA-BN

Mega/Crew/Quad/Reg (‘11-‘16) 40/20/40 w/adjustable headrests, seat airbag, fold-down console (covered), without center seat storage. Mega/Crew/Quad/Reg (‘11-‘12) 40/20/40 w/adjustable headrests, seat airbag, center seat storage, fold-down console (covered), with or without center seat storage, and built-in storage tray.

$193.00

Gravel SS-2476CA-GY

$239.00

Gravel SS-3435CA-GY

$239.00

Gravel SS-3438CA-GY

$193.00

Gravel SS-2459CA-GY BROWN

$193.00

GRAVEL

Gravel SS-2450CA-GY Brown SS-3430CA-BN $239.00

Gravel SS-3430CA-GY

SEAT SAVER custom fit SEAT COVERS

Brown SS-3429CA-BN $239.00

Gravel SS-3429CA-GY

Mega/Crew/Reg (‘10-‘12) 40/20/40 w/adjustable headrests, center seat storage and fold-down console (covered).

Brown SS-3410CA-BN

Mega/Crew/Reg (‘10-‘12) 40/20/40 w/adjustable headrests and fold-down console. This design doesn’t accommodate consoles with storage under the seat area.

Brown SS-3405CA-BN

ST & SLT (‘10-‘12) Mega/Crew/Quad/Reg Bucket seats with adjustable headrests. Does not fit Laramie or Sport.

Brown SS-2430CA-BN

Laramie/Sport (‘10-‘11) Bucket seats with adjustable headrests. This seat configuration has a big factory console between the seats.

Brown SS-2405CA-BN

$239.00

Gravel SS-3410CA-GY

$239.00

Gravel SS-3405CA-GY

$193.00

Gravel SS-2430CA-GY

Carhartt famous rugged durability is now available in SeatSaver™ seat protectors. Don’t let the good looks fool you. These seat protectors are tough as nails with heavy duty, firm-hand Carhartt® breathable duck weave fabric and triple stitched main seams. Your butt might wear out before these seat protectors. Available in Carhartt Brown and Gravel colors they feature storage pockets with signature Carhartt rivets and a Durable, Water-Repellent (DWR) finish. They’ll always look good no matter how bad you treat ‘em. FEATURES & BENEFITS

• Carhartt® brand logo and styling • Custom patterned for a perfect fit • Easy to install / easy to remove • Protect seats from sun, dirt, workweek abuse • Durable Water Repellency (DWR) finish for spills • Strong overlapped, double & triple-stitched seams • Easily removed for cleaning and washing in home washer/dryer • Headrest & center console covers

$193.00

REAR SEAT STYLE/YEAR

Gravel SS-2405CA-GY

Laramie/Sport (‘10-‘12) 40/20/40 seats with adjustable headrests and covered center seat storage.

Brown SS-3413CA-BN

Mega/Quad/Reg (‘09-‘14) 40/20/40 seats with adjustable headrests and fold down console (covered).

Brown SS-3445CA-BN

Mega/Quad/Reg (‘06-‘09) 40/20/40 seats with adjustable headrests and fold down console (covered).

Brown SS-3372CA-BN

Mega/Quad/Reg (‘06-‘09) Bucket seats with adjustable headrests.

PRICE

Brown SS-8396CA-BN

$239.00

Brown SS-8397CA-BN

$239.00

Crew/Quad Cab (‘11-‘18) 60/40 split seats with 3 adjustable headrests (2 large, 1 small) without fold-down armrest. Crew Cab Only (‘11-‘18) Full bench seat w/3 adj. headrests and center shoulder belt.

Brown SS-7432CA-BN

Crew Cab (‘10) 60/40 split seats w/3 adj. headrests & fold-down cup holder.

Brown SS-8385CA-BN

Quad Cab 60/40 (‘04-‘08) 60/40 with adjustable headrest.

Brown SS-7366CA-BN

Quad Cab Full Bench (‘04-‘09) Full bench with adjustable headrests.

Brown SS-7361A-BN

Quad Cab Full Bench (‘03) Seats without headrests.

Brown SS-6348CA-BN

Quad Cab 60/40 (‘03) Seats without headrest.

Brown SS-7347CA-BN

Gravel SS-3413CA-GY

Gravel SS-3445A-GY

$239.00

Gravel SS-3372CA-GY Brown SS-2398CA-BN $193.00

Gravel SS-2398CA-GY

Quad Cab/Reg (‘04.5-‘05) 40/20/40 seats with adjustable headrests, with opening for lumbar dial and fold-down console (covered).

Brown SS-3358CA-BN

Quad Cab/Reg (‘03-‘04) 40/20/40 seats with adjustable headrests, without opening for lumbar dial and fold-down console (covered).

Brown SS-3344CA-BN

$239.00

Gravel SS-3358CA-GY

$239.00

Gravel SS-3344CA-GY

16 l Ram Turbo Diesel Parts & Accessories  #101

COLOR/PART#

Crew/Quad Cab (‘11-‘18) 60/40 split seats with 3 adjustable headrests with fold-down armrest.

Gravel SS-8396CA-GY

PRICE $245.00

$245.00

Gravel SS-8397CA-GY

Gravel SS-7432CA-GY

Gravel SS-8385CA-GY

Gravel SS-7366CA-GY

Gravel SS-7361CA-GY

Gravel SS-6348CA-GY

Gravel SS-7347CA-GY

$188.00

$245.00

$188.00

$188.00

$130.00

$188.00

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


FRONT SEAT STYLE/YEAR

Custom Fit Seat Covers Keep the seats in your Ram 1500/2500/3500 truck looking new or cover up damaged seats with the addition of custom fit slip-on Covercraft SeatSaver seat protectors. They protect against dirt and outdoor sun to help keep the seats looking like new. The seat covers are made with a breathable heavy-duty polycotton fabric so they are comfortable and you won’t stick to them like other kinds of seat covers. We find the fabric to be slightly lighter than blue jeans, but heavier than polyester/wool. The fabric is protected with a durable water repellent finish that prevents most spills from reaching the seats. You’ll like the washable fabric that has proven to be durable, yet not too bulky.

REAR SEAT STYLE/YEAR Crew/Quad Cab (‘11-‘18) 60/40 split seats with 3 adjustable headrests with fold-down armrest. Crew/Quad Cab (‘11-‘18) 60/40 split seats with 3 adjustable headrests (2 large, 1 small) without fold-down armrest. Crew Cab Only (‘11-‘18) Full bench seat w/3 adj. headrests and center shoulder belt. Crew/Quad Cab (‘10) 60/40 split seats w/2 adj. headrests, center shoulder belt & no armrest. Crew Cab (‘10) 60/40 split seats w/3 adj. headrests & fold-down cup holder. Mega Cab (‘08-‘09) 60/40 split seats w/3 adj. headrests and fold-down cup holder. Mega Cab (‘06-‘07 and ‘10-‘17) 60/40 split seats w/adj. headrests and fold-down cup holder. Quad Cab 60/40 (‘04-‘08) 60/40 with adjustable headrest.

COLOR/PART#

Quad Cab 60/40 (‘03) Seats without headrest.

Mega/Quad/Reg (‘09-‘14) 40/20/40 seats with adjustable headrests, fold down console (covered) and seat airbag. Without cup holders, and center seat storage.

Misty Gray SS-3445-CCCT

Mega/Quad/Reg (‘06-‘09) 40/20/40 seats with adjustable headrests and fold down console (covered).

Misty Gray SS-3372-CCCT

Mega/Quad/Reg (‘06-‘09) Bucket seats with adjustable headrests.

Misty Gray SS-2398-CCCT

Quad Cab/Reg (‘04.5-‘05) 40/20/40 seats with adjustable headrests, with opening for lumbar dial and fold-down console (covered).

Misty Gray SS-3358-CCCT

Quad Cab/Reg (‘03-‘04) 40/20/40 seats with adjustable headrests, without opening for lumbar dial and fold-down console (covered).

Misty Gray SS-3344-CCCT

$159.95

$159.95

Charcoal SS-7366-CCCH

$124.95

Charcoal SS-6348-CCCH $69.95

Wet Sand SS-6348-CCSA Charcoal SS-7347-CCCH $124.95

Quad Cab (‘98-‘02) 40/20/40 seats.

Wet Sand SS-7347-CCSA Charcoal SS-6271-CCCH

All Cab Styles (‘94-‘02)

Gray SS-6271-CCGY

$69.95

Taupe/Tan SS-6271-CCTP

Catalog good through October 2018 l Prices subject to change without notice.

Std Cab (‘98-‘02) Std/Ext/Club Cab (‘94-‘97) 40/20/40 seats.

Charcoal SS-3429-CCCH $156.95

Wet Sand SS-3429-CCSA Charcoal SS-3410-CCCH $156.95

Wet Sand SS-3410-CCSA Charcoal SS-3405-CCCH $156.95

Wet Sand SS-3405-CCSA Charcoal SS-2430-CCCH $127.95

Wet Sand SS-2430-CCSA

$124.95

Charcoal SS-7361-CCCH

$156.95

Wet Sand SS-3430-CCSA

Misty Gray SS-3413-CCCT

Wet Sand SS-8363-CCSA

Misty Gray SS-7347-CCCT

Charcoal SS-3430-CCCH

Laramie/Sport (‘10-‘12) 40/20/40 seats with adjustable headrests and covered center seat storage.

Charcoal SS-8363-CCCH

Misty Gray SS-6348-CCCT

Misty Gray SS-3430-CCCT

$127.95

Wet Sand SS-2450-CCSA

$159.95

Wet Sand SS-7361-CCSA Quad Cab Full Bench (‘03) Seats without headrests.

Mega/Crew/Quad/Reg (‘11-‘16) 40/20/40 w/adjustable headrests, seat airbag, fold-down console (covered), without center seat storage.

Charcoal SS-2450-CCCH

Misty Gray SS-2405-CCCT

Wet Sand SS-8380-CCSA

Misty Gray SS-7361-CCCT

Misty Gray SS-2450-CCCT

$127.95

Wet Sand SS-2459-CCSA

Laramie/Sport (‘10-‘11) Bucket seats with adjustable headrests. This seat configuration has a big factory console between the seats.

Wet Sand SS-7366-CCSA Quad Cab Full Bench (‘04-‘09) Full bench with adjustable headrests.

Laramie (‘12-‘13) Bucket seats with adjustable headrests. This configuration has a big factory console between the seats.

Charcoal SS-2459-CCCH

$159.95

Charcoal SS-8380-CCCH

Misty Gray SS-7366-CCCT

Misty Gray SS-2459-CCCT

Misty Gray SS-2430-CCCT

Wet Sand SS-8385-CCSA

Misty Gray SS-8363-CCCT

Reg/Mega/Crew/Quad (‘11-‘16) 1500/2500/3500 Bucket seat with adjustable headrests with seat airbag. Does not fit Laramie or Sport.

$156.95

Wet Sand SS-3438-CCSA

ST & SLT (‘10-‘12) Mega/Crew/Quad/Reg Bucket seats with adjustable headrests. Does not fit Laramie or Sport.

Charcoal SS-8385-CCCH

Misty Gray SS-8380-CCCT

Misty Gray SS-3438-CCCT

$124.95

Wet Sand SS-8386-CCSA Misty Gray SS-8385-CCCT

Charcoal SS-3438-CCCH

All Cabs (‘13-‘16) 40/20/40 seats with adjustable headrests, fold-down console w/3 cupholders & lid, seat airbag and with center storage.

Misty Gray SS-3405-CCCT

Charcoal SS-8386-CCCH

$156.95

Wet Sand SS-3435-CCSA

Mega/Crew/Reg (‘10-‘12) 40/20/40 w/adjustable headrests and fold-down console. This design doesn’t accommodate consoles with storage under the seat area.

Wet Sand SS-7432-CCSA

$127.95

Charcoal SS-3435-CCCH

$159.95

Charcoal SS-7432-CCCH

Misty Gray SS-8386-CCCT

Misty Gray SS-3435-CCCT

Misty Gray SS-3410-CCCT

Wet Sand SS-8397-CCSA Misty Gray SS-7432-CCCT

All Cabs (‘13-‘16) 40/20/40 seats with adjustable headrests, fold-down console w/3 cupholders & lid, seat airbag and without center storage.

Mega/Crew/Reg (‘10-‘12) 40/20/40 w/adjustable headrests, center seat storage and fold-down console (covered).

Charcoal SS-8397-CCCH

PRICE

Wet Sand SS-2476-CCSA

Misty Gray SS-3429-CCCT

$159.95

Wet Sand SS-8396-CCSA Misty Gray SS-8397-CCCT

Misty Gray SS-2476-CCCT

Mega/Crew/Quad/Reg (‘11-‘12) 40/20/40 w/adjustable headrests, seat airbag, center seat storage, fold-down console (covered), with or without center seat storage, and built-in storage tray.

PRICE

Charcoal SS-8396-CCCH Misty Gray SS-8396-CCCT

COLOR/PART# Charcoal SS-2476-CCCH

Laramie/Sport (‘14-‘18) Bucket seats with adjustable headrests and seat air bags. This seat configuration has a big factory console between the seats.

Charcoal SS-2405-CCCH $127.95

INTERIOR PARTS & ACCESSORIES - SEAT COVERS

Other front seat covers are available for 2014 and up trucks. Please call us or check our website for applications.

Wet Sand SS-2405-CCSA Charcoal SS-3413-CCCH $156.95

Wet Sand SS-3413-CCSA Charcoal SS-3445-CCCH $156.95

Wet Sand SS-3445-CCSA Charcoal SS-3372-CCCH $156.95

Wet Sand SS-3372-CCSA Charcoal SS-2398-CCCH $127.95

Wet Sand SS-2398-CCSA Charcoal SS-3358-CCCH $156.95

Wet Sand SS-3358-CCSA Charcoal SS-3344-CCCH $156.95

Wet Sand SS-3344-CCSA Charcoal SS-3251-CCCH Gray SS-3251-CCGY

$156.95

Taupe/Tan SS-3251-CCTP Charcoal SS-3250-CCCH Gray SS-3250-CCGY

$156.95

Taupe/Tan SS-3250-CCTP

Order 770-886-2500 or genosgarage.com

l 17


INTERIOR PARTS & ACCESSORIES

1989-1993 FIRST GENERATION

1994-2002 SECOND GENERATION

DORMAN Headlight Switch Repair Pigtail (‘89-‘97)

DRM645938 $28.95

DORMAN Power Window and Lock Switch DRIVER SIDE (‘99-‘02)

DRM901440 $54.95

MOPAR Replacement Headlight Switch  (‘89-‘93)

56021898AB $59.95

MOPAR Power Window and Lock Switch, 3-gang DRIVER SIDE (‘99-‘02)

NEW! 56021912AB $99.95

DORMAN Window Lift Motor (‘90-‘93) Passenger Side

DRM742306 $60.95

MOPAR Power Window and Lock Switch, 3-gang DRIVER SIDE (‘98)

NEW! 56021383 $54.95

DORMAN Window Lift Motor (‘90-‘93) Driver Side

DRM742307 $67.95

MOPAR Power Window and Lock Switch, 2-gang PASSENGER SIDE (‘98)

NEW! 56020394 $42.95

DORMAN Electric Window Switch (‘89-‘93) Passenger Side

DRM901402 $32.95

DORMAN Power Window Switch - DRIVER SIDE (‘94-‘97, 2500/3500)

DRM901458 $26.95

MOPAR Speedometer Sensor with Pinion and Wiring Adapter (‘93-‘97) 3 wire sensor and hard wiring is required.

5013660AA $34.95

MOPAR Seat Recline Lever - DRIVER SIDE (‘95-‘02) Regular & Extended Cab

NEW! 55196021AA $19.95

MOPAR Seat Recline Lever - DRIVER SIDE (‘98-‘02) Quad Cab

NEW! 5010259AA $62.95

1994-2002 SECOND GENERATION MOPAR Headlight Switch with Cargo Light (‘99-‘02)

NEW! 56021673AD $74.95

MOPAR Seat Lumbar Lever DRIVER SIDE (‘95-‘02)

NEW! 4797891 $20.95

MOPAR Headlight Switch without Cargo Light (‘99-‘02)

NEW! 56021675AE $79.95

MOPAR Seat Adjuster Switch Bezel DRIVER SIDE (‘94-‘02, Regular & Extended Cab)

NEW! 4746477 $29.95

MOPAR Headlight Switch (‘98)

NEW! 68148078AA $82.95

MOPAR 6-way Power Seat Switch w/o Lumbar DRIVER SIDE (‘94-‘02 & ‘04-‘09)

NEW! 56049777AA $99.95

MOPAR Headlight Switch (‘94-‘97) Repair harness and connector included.

04886449AB $88.95

MOPAR Heater Core (‘94-‘02) 2500 & 3500

4720008 $147.95

DORMAN Headlight Switch Repair Pigtail (‘89-‘97)

DRM645938 $28.95

MOPAR A/C Evaporator (‘95-‘02) 2500 & 3500

5012534 $386.00

MOPAR Brake Light Switch (‘01-‘09)

NEW! 5083344AA $20.95

MOPAR A/C Evaporator Foam (‘94) 2500 & 3500

V9900006 $22.95

MOPAR Brake Light Switch (‘99-‘00)

NEW! 5016294AD $20.95

MOPAR Brake Light Switch (‘94-‘98)

NEW! 4671336AD $19.95

DORMAN Climate Control Blower Motor Resistor (‘94-‘02)

DRM973020 $27.95

DORMAN Blower Motor Resistor Repair Pigtail (‘94-‘02)

DRM645701 $14.95

Fuse Panel Cover (‘94-‘97) Paint to match interior.

5CU60PD5 $21.95

DORMAN Door Lock Actuator (‘94-‘02) Driver Side

DRM931634 $98.95

DORMAN Door Lock Actuator (‘94-‘02) Passenger Side

DRM931635 $115.95

DORMAN Window Lift Motor (‘94-‘02) Driver Side

DRM742315 $49.95

MOPAR Headlight Switch without Fog Lights (‘03-‘05)

NEW! 56045536AC $67.95

DORMAN Window Lift Motor (‘94-‘02) Passenger Side

DRM742314 $49.95

MOPAR Brake Light Switch (‘01-‘09)

NEW! 5083344AA $20.95

18 l Ram Turbo Diesel Parts & Accessories  #101

2003-2009 THIRD GENERATION DORMAN Keyless Entry Remote and Programmer (‘03-‘05)

DRM99164 $63.95

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


2003-2009

THIRD GENERATION

sDORMAN Door Lock Actuator ‘03-‘09) Front

DRIVER DRM931636: $72.00 PASSENGER DRM931637: $68.00

MOPAR Power Seat Switch - PASSENGER SIDE without lumbar support (‘04-‘09)

NEW! 56049776AA $49.95

DORMAN Door Lock Actuator (‘03-‘09) Rear - Quad Cab only.

DRIVER DRM931644: $72.95 PASSENGER DRM931645: $72.95

MOPAR Heater Core (‘03-‘09) 2500 & 3500

68004228AB $109.95

DORMAN Window Lift Motor (‘03-‘09) Front

DRIVER DRM742440: $49.50 PASSENGER DRM742441: $49.50

MOPAR Blower Motor Resistor (‘03-‘09)

68004539AA $61.95

DORMAN Window Lift Motor (‘03-‘09) Rear - Quad Cab only.

DRIVER DRM742442: $52.50 PASSENGER DRM742443: $37.95

DORMAN Window/Lock Switch Bezel DRIVER SIDE (‘03-‘05, Quad Cab) Direct replacement part restores the look of the interior.

BLACK DRM76110: $19.95 TAUPE DRM76115: $22.95

DORMAN Window/Lock Switch Bezel PASSENGER SIDE (‘03-‘05, Quad Cab) Direct replacement part restores the look of the interior.

DARK GREY DRM76114: $23.95 TAUPE DRM76116: $22.95

MOPAR Power Door Switch with Lockout - DRIVER SIDE (‘03-‘09, 2500/3500 Quad Cab)

NEW! 68171680AB $139.00

DORMAN 5-Button Master Power Window and Lock Switch - DRIVER SIDE Regular Cab (‘03-‘09, 2500/3500)

DRM901484 $84.95

DORMAN Rear Door Harness with Connectors - LEFT or RIGHT (‘04-‘05, 1500/2500/3500 Quad Cab) (Speaker, door locks and window)

DRM645506 $128.95

MOPAR 6-way Power Seat Switch without Lumbar DRIVER SIDE (‘94-‘02 & ‘04-‘09)

NEW! 56049777AA $99.95

DORMAN Brake Pedal Pad (‘03-‘18) For automatic transmission trucks.

DRM20785 $8.95

DORMAN Brake & Clutch Pedal Pad (‘03-‘18) For manual transmission trucks.

DRM20780 $8.95

2010-2018 FOURTH GENERATION NEW! DRM99360 $98.90

Programmable Keyless Entry Remote (‘11-‘12) For Ram 1500/2500/3500 trucks. Includes 3 button programmer.

DORMAN Window Lift Motor (‘10-18)  NEW! ‘10-‘18, 2500/3500/4500/5500 ‘09-‘18, 1500

DRIVER DRM742439: $47.95 PASSENGER DRM742438: $47.95

MOPAR Blower Motor Resistor (‘10-‘18)

68048900 $36.95

DORMAN Brake Pedal Pad (‘03-‘18) For automatic transmission trucks.

DRM20785 $8.95

DORMAN Brake & Clutch Pedal Pad (‘03-‘18) For manual transmission trucks.

DRM20780 $8.95

INTERIOR PARTS & ACCESSORIES

2003-2009 THIRD GENERATION

REPLACEMENT SEAT MOTORS AND GEARS MOTOR GEAR KITS ‘03-‘08, 2500/3500 & ‘02-‘05, 1500

SEAT MOTORS ‘03-‘08, 2500/3500 & ‘02-‘05, 1500 Forward/Backward Adjustment

SEAT-DOD4: $65.00

Up/Down Adjustment (FRONT)

SEAT-DOD1: $89.00

Forward/Backward Adjustment All factory gear cases, thrust washers and roll pins must be reused.

Up/Down Adjustment (FRONT) Must reuse factory tube nut, gear shims and thrust washers.

Up/Down Adjustment (REAR)

SEAT-DOD1GS: $55.00

SEAT-DOD2: $80.00

Up/Down Adjustment (REAR) Must reuse factory tube nut, gear shims and thrust washers.

‘98-‘02, 2500/3500 & ‘98-‘01, 1500 Up/Down Adjustment Motor Conversion Kit

SEAT-DOD14: $109.00

SEAT-DOD6: $ 89.00

‘94-‘97, 1500/2500/3500

‘94-‘97, 1500/2500/3500 Forward/Backward Adjustment Must reuse factory tube nut, gear shims and thrust washers.

Forward/Backward Adjustment

SEAT-DOD3: $65.00

Up/Down Adjustment

SEAT-DOD5: $82.00

Up/Down Adjustment

Catalog good through October 2018 l Prices subject to change without notice.

SEAT-DOD2GS: $55.00

Must reuse factory tube nut, gear shims and thrust washers.

SEAT-DOD13: $109.00

SEAT-DOD5GS: $55.00

Order 770-886-2500 or genosgarage.com

l 19


ENGINE PARTS & UNDERHOOD PARTS/ACCESSORIES

FLEETGUARD Engine Block Heater Cables

‘89-‘18, 2500/3500 5.9L & 6.7L (6ft. cable.) ‘14-‘18, Ram 1500 EcoDiesel (5ft. cable.) HEATER_CABLE_FL:  $18.95 ECO_HEATER_CABLE_FL:  $18.95

Don’t be left out in the cold! Make sure your Ram Turbo Diesel has a block heater cable so you can warm the engine for easy starting in cold weather. The engine has the block heater installed, but many times the dealers did not order the engine block heater cable with the trucks.

Quick Grille Release Kit (‘10-‘18) 

HEATER CABLE PLUG COVER

QGKT:  $24.95

360-0012:  $4.75

Attention 4G Owner

s:

Best Seller!

H TDR71, p141-143   I

Help keep the elements out of the heater cable connection.

Since 1994 and the Second Generation truck, with its grille attached to the hood design, Turbo Diesel owners have come to expect easy access to the radiator as well as access to the engine. No more with your ‘10-‘18 truck? Hold on, we’ve corrected this design flaw/service access problem with the Quick Grille Release kit for Fourth Generation trucks.

CUMMINS ENGINE BLOCK HEATERS

The Quick Grille Release Kit is a simple collection of hardware store parts, but we’ve made refinements by sourcing tether-type release pins. Use the bumper as a step again with this kit.

‘89-‘98, 12V

3916127:  $69.95

Installation instructions included. *Will not work on ‘14-‘18 Ram EcoDiesel trucks.

‘98.5-‘18, 5.9L & 6.7L 3975628:  $33.00

These engine block heaters are threaded directly into the engine block on the passenger side. Rated at 750w. NOTE: Before ordering this product double-check to see which engine block heater your truck is equipped with. There is some overlap of years where the ‘94-‘98 Turbo Diesel trucks use either of the engine block heaters.

‘03-‘09 shown.

Block Heater Bumper Plug

‘10-‘18 WD-BHP10:  $45.95 ‘03-‘09 WD-BHP:  $45.95 ‘94-‘02 NON-SPORT The Block Heater Bumper Plug has the heater WD-BHP-9402:  $45.95 cable attached for quick and easy installation. Universal Fit WD-BHPUNI:  $45.95 Installs in front bumper. (This kit fits trucks with aftermarket bumpers.)

Install an Excelsior Block Heater Bumper Plug on your truck, and you have the heater connection located in a fixed position right up front behind a flip-open, weatherproof cover. To install, remove the old block heater cable from the engine block and plug the new cable in. *NOTE: Will not work on ‘14-‘18 Ram 1500 EcoDiesel trucks.

2010 Ram shown. Cab Fresh Filter KitS Cab Fresh Filter Kit (‘10-‘18) CFF-DG-19009K:  $59.00

Replacement Filters (‘03-‘09) CFF-DG-19003R:  $17.00

Replacement Filters (‘10-‘18) CFF-DG-19009R:  $17.00

Cab Fresh Filter Kit (‘94-‘02)  V CFF-DG-0610K:  $56.00

Cab Fresh Filter Kit (‘03-‘09) CFF-DG-19003K:  $59.00

Replacement Filters (‘94-‘02) CFF-DG-0611R:  $16.00

This easy to install dual-stage filtering system helps remove dirt and dust and keep it from getting into the interior of your truck. It fits over the factory vents underneath the hood. ‘10-‘18 style shown.

20 l Ram Turbo Diesel Parts & Accessories  #101

Other cabin filter kits for 2010-up trucks are available on page 12.

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


ENGINE PARTS & UNDERHOOD PARTS/ACCESSORIES

2010-2012

nylon 24” X 24” reen sc mesh bug ith each included w Guard r Condense NOTE: Grille must be removed to install the Winter Front on ‘10-‘12 trucks.

2003-2009 Shown uncoated for clarity.

A/C CONDENSER/INTERCOOLER Guard, ‘13-’18

‘13-‘18, 6.7L CONDENSER/INTERCOOLER GUARD KIT  GG-CD-IC4G:  $85.95 (Includes (1) WD_COND_GR_13 and (1) GG-ICGUARD)

‘13-‘18, 6.7L INTERCOOLER GUARD GG-ICGUARD:  $45.95

The intercooler in the ‘13-‘18 trucks is now located beneath the radiator rather than behind like the ‘10-‘12 trucks. This guard is similar to our condensor guard and protects the intercooler from damage by road debris. If you already have the A/C condenser guard in your truck, you can add the intercooler guard.

1994-2002

Save when you buy the condenser and intercooler guard together!

1994-2002

nylon 24” X 24” reen sc g bu h es m ith each included w Guard r Condense

CoverCraft Winter Front  I

‘10-‘12 ‘03-‘09 ‘94-‘02 WINTER_FR_10:  $79.95 WINTER_FR_0309:  $79.95 WINTER_FR_9402:  $79.95

Improve engine warm-up time in cold weather with a Covercraft winter grille cover for your ‘94-‘12 Ram Cummins truck. In Summer the cover is rolled up and acts as a bug screen to help keep the radiator free-flowing for better cooling. The grille cover is made of black vinyl and goes over the front core support. The material rolls up and down so you can adjust the amount of air you want to pass through the radiator.

2010-2012

Shown uncoated for clarity.

A/C Condenser Guard  I ‘13-‘18, 6.7L WD_COND_GR_13:  $54.95 ‘10-‘12, 6.7L WD_COND_GR_10:  $54.95 ‘03-‘09, 5.9L & 6.7L WD_COND_GR_0307:  $54.95 ‘94-‘02, 5.9L WD_COND_GR_9402:  $54.95

Available in Black only.

The air conditioning condenser on the ‘94-‘18 Dodge Ram has no protection coming from the factory and may be subject to costly damage. The condenser guard addresses this by covering the condenser in full with a black powdercoated 16 gauge guard with 1/2” perforated holes for maximum air flow. The condenser guard has a U-shaped lip that covers the top of the condenser’s fins to keep them from being bent. p Left side covered up/Winter Front.

p Right side unrolled/Bug Screen.

Ram Cummins/ Ram EcoDiesel Winter Front/ Bug Screen (‘10-‘18) ‘10-‘18, Ram GG-WFHD10:  $108.95 ‘14-‘17, EcoDiesel GG-WFED14:  $108.95

This winter front/bug screen installs outside the engine compartment and fits over the truck’s grill. Fasten and unfasten the velcro to roll and unroll it.

Catalog good through October 2018 l Prices subject to change without notice.

Installation for ‘94-‘09 trucks is straightforward and takes only minutes. The lip of the condenser guard is put on top of the air conditioning condenser and secured at the bottom with zip ties. On the ‘10-‘18 trucks the grille has to be removed (instructions show you how) to install the guard. Since the grille has to be removed we strongly suggest purchasing our Quick Grille Release Kit (#QGKT) so that future access to the area becomes a 5-second proposition.

Order 770-886-2500 or genosgarage.com

l 21


ENGINE PARTS & UNDERHOOD PARTS/ACCESSORIES

Intercooler Hoses Replacement intercooler hoses from Gates feature an exclusive Viton inner liner to better withstand high heat and contamination. The hoses are rated for 145 psi and are sold individually.

Clamps included with each hose.

APPLICATION

Intercooler Hose Kits

PART#

‘10-‘13, 6.7L BD-1045217:  $345.00 ‘03-‘07, 5.9L  BD-1045215:  $279.00 ‘07.5-‘09, 6.7L BD-1045216: $345.00 ‘94-‘02, 5.9L  BD-1045210:  $279.00

Black Nomex Silicone intercooler hoses designed for 75 psi of turbo boost with spring-loaded clamps to hold them in place.

Hi-Torque Hose Clamps 2.75” BD-1405209:  $15.00 3.00” BD-1405211:  $15.00 3.50” BD-1405212:  $15.00 4.00” BD-1405213:  $15.00

These clamps are designed to be used where high boost levels require a hose clamp that can provide extra holding power.

Killer Dowel Pin Kit (‘89-‘02)

‘89-‘93 or ‘98.5-‘02 - BENT TAB TST-KDP04:  $65.00 ‘94-‘98, 12-valve - STRAIGHT TAB TST-KDP03:  $65.00

The dowel pin used in the Cummins engine can back out of its bore. When it does, it can fall into the camshaft gear and cause all types of expensive engine damage. The folks at TST Products have developed a kit to cover the dowel pin and prevent its movement. The kit is inexpensive protection. Unfortunately the labor involved to access the KDP and cover it with the cover tab is time consuming. However, clear instructions make it a job that the D-I-Yer can handle. LEARN MORE: KILLER DOWEL PIN https://www.genosgarage.com/downloads/TechPDF/TDR57_KillerDowelPin.pdf

Polyurethane heavy-duty Engine Mounts (‘89-’93)

4WD TRANSFER CASE SUPPORT BRACKET KIT (‘03-’07) TC48REAC: $98.95

4WD transfer case housings on trucks with 48RE transmissions often crack and this is typically due to the lack of support of the heavy transfer case. This kit has been designed to solve this problem and is easy to install. A specially designed steel bracket installs in place of the lower two bolts (longer bolts supplied), and includes the common universal mount. NOTE: Must have factory skid plate installed to work.

PB2710: $139.00 pair

These are solid polyurethane inserts with an internal locking system where the factory ones have an external safety lock. Features stainless steel hardware. Fits all Dodge pickups equipped with the Cummins engine from ‘89-‘93. Mounts are 3” x 3-1/2” and 1-3/4” thick.

HEAVY-DUTY REAR ENGINE/TRANSMISSION POLYURETHANE MOUNT (‘94-‘02, 2500/3500)

PB2852 $99.00

This heavy duty, polyurethane bushings is a direct replacement for the stock mount. Fit in the same location, easy to install.

Polyurethane heavy-duty Engine Mount Inserts (‘94-’02)

HEAVY-DUTY REAR ENGINE/TRANSMISSION POLYURETHANE LOWER MOUNTS (‘89-‘93, 4X4 d250/d350)

These are a solid polyurethane mount where the factory ones are rubber with gapped holes in them. These are not inserts that fit inside the stock rubber, but a replacement for the whole rubber mount. To install, remove the old rubber from the engine mount and replace with these.

These heavy duty, polyurethane bushings are a direct replacement for the stock mount. Easy to install and fit in the same location.

PB1604 $26.00

PB2453KIT: $198.00 pair

22 l Ram Turbo Diesel Parts & Accessories  #101

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


The Cummins vibration damper is an OEM replacement and is not designed to be used in hi-performance applications. ‘13-‘18, 6.7L  5333569:  $375.00 ‘07.5-‘12, 6.7L  5285679:  $375.00 ‘03-‘07, 5.9L  3957297:  $385.00 ‘98.5-‘02, 24V  3918999:  $198.00 ‘94-‘98, 12V  3924435:  $215.00 ‘89-‘93, 12V  3916436:  $209.95 LEARN MORE: HARMONIC DAMPER https://www.genosgarage.com/downloads/TechPDF/TDR73_HarmonicDamper.pdf

FREE

‘94-‘02

SHIPPING Sno Depot Stainless Steel Oil Pans (5.9L & 6.7L)

‘03-‘09 SS3949769:  $715.00 ‘94-‘02 SS4089093:  $715.00

Pans are constructed out of heavy gauge 304 Stainless and laser cut for precision fit. Comes with gasket, hardware and drain plug.

‘03-‘09

Manufacturer limited lifetime warranty.

H TDR73, p44-51

Harmonic Dampers

When was the last time you thought about the crankshaft vibration damper on your Dodge Cummins Turbo Diesel? We will bet you did not know that your Owner’s Manual suggests that you inspect the damper every 30k, 60k, 90k, etc. miles. Get a reduction in noise, better idle quality, less clutch/gearbox chatter (manual trans), and less vibration when accelerating in the 2000rpm to 3000rpm speed zone. ‘07.5-‘18, 6.7L FLUID_920321:  $518.00 ‘03-‘07, 5.9L FLUID_920301:  $435.00 ‘98.5-‘02, 24V FLUID_960301:  $435.00 ‘94-‘98, 12V FLUID_960311:  $488.00 (#960311 Includes Sensor Kit 300003)

Oil Pan (‘03-’11)

DRM264470:  $215.95

This replacement oil pan is a low cost replacement for your Ram truck that fits like OEM. Includes drain plug. • Stamped steel construction ensures long lasting durability • High strength coating prevents rust • Manufactured to strict engineering quality standards

Drill Pin Kit, All Years FLUID_300002:  $45.00 (Adds extra pins between the damper and the crank. Used on high horsepower trucks that exceed 3500 rpm in order to additionally secure the damper to the crankshaft.)

‘03-‘09

ENGINE PARTS & UNDERHOOD PARTS/ACCESSORIES

Vibration Damper

‘94-‘02 Billet Aluminum Transmission Oil Dipstick Handle, ‘94-‘18, 5.9L & 6.7L

Billet Aluminum Engine Oil Dipstick Handle, ‘07.5-‘18, 6.7l

LT-TRANS-DS:  $19.95

LT-DIPSTICK:  $19.95

Dress up the engine compartment with this red anodized transmission oil dipstick handle.

Dress up the engine compartment with this blue anodized oil dipstick handle.

BILLET ALUMINUM OIL FILL CAP COVERS, ‘98.5-’18

‘89-‘93 Oil Pans and Gaskets (‘89-‘09) All replacement oil pan drain plugs are 18MM. NOTE: Drain plugs are not included. For drain plug options see page 3.

‘03-‘09, 5.9L & 6.7L Oil Pan 3949769:  $347.95 Pan Gasket 3958165:  $41.95 Pick Up Tube Gasket 3949562:  $2.80

‘94-‘02, 5.9L

RAMS HEAD, ‘98.5-‘18 BAOC:  $36.95

CUMMINS C

BAOC2:  $37.95

We know you like dress-up items. Here’s another one that you can add to your engine with immediate results. Just snap the cover over the existing oil fill cap and you’re good to go. NOTE: Will not fit early model ‘89-‘98 12-valve trucks.

Catalog good through October 2018 l Prices subject to change without notice.

Oil Pan 4089093:  $179.95 Pan Gasket 4337616:  $18.95 Pick Up Tube Gasket 3938157:  $2.95

‘89-‘93, 5.9L Oil Pan 3914403:  $475.00 Pan Gasket 4337616:  $18.95 Pick Up Tube Gasket 3938157:  $2.95

Order 770-886-2500 or genosgarage.com

l 23


ENGINE PARTS & UNDERHOOD PARTS/ACCESSORIES

SourcePWR SMART IGNITION POWER MODULE

ROSTRA_250_2950:  $27.95

Before the days of your truck having a module-for-this and a module-for-that, an owner would simply tie into an ignition “On” power source and power a relay to add additional circuits. With the Rostra SourcePWR you no longer have to poke and prod for the ignition on signal. The SourcePWR goes directly to the battery and it is triggered on and off (a smart logic circuit) by the voltage drop when you engage the starter. The SourcePWR can then be used to add a 7.5amp circuit to your truck.

Throttle Sensitivity Booster

RAM 2500/3500 Battery CABLE KITS After having many requests for replacement battery cables (typically Mopar cost are over $400 a set), one of our customers suggested we call Vince at CustomBatteryCables.com. We called Vince. The short version of the story, Vince builds a great product. So much so that his custom cables (read one at a time with talk-time that takes away from build time) could takes days before they could be shipped. Ouch, when the batteries and starting system go bad, you need parts pronto. To eliminate the hassle of one at a time, Vince built us a quantity of cable sets. We stock them, he doesn’t have to answer the phone.

‘07-‘18, 5.9L & 6.7L Manual/Automatic Transmission ‘14-‘18, Ram 1500 EcoDiesel Automatic Transmission BD-1057732:  $285.00 ‘05-‘06, 5.9L Manual & Automatic Transmission BD-1057731:  $285.00 ‘98.5-‘02, 24V Manual Transmission only. BD-1057730:  $285.00 Optional Dash Switch for 1057732 and 1057731 BD-1057705:  $65.00

The BD Throttle Sensitivity Booster provides instant throttle response and reduced pedal lag for your Ram Turbo Diesel truck. You get adjustable sensitivity levels of +50% and +100% Modes. An optional dash switch is available that gives you multiple setting options compared to only two with the standard module.

His quality is unsurpassed. Vince has been making cables for heavy equipment and trucks for over 20 years. These Ram replacement cable kits are built from 2/0 (“two-aught”) cable for the starter and engine block grounds. After he crimps the heavy-duty copper terminals with a 12-ton hydraulic crimper, he seals the connection with adhesive lined heat shrink which helps prevent battery acid and acid fumes from corroding the cables. Cables are shipped with split loom, nuts and bolts with anti-corrosion plating and connectors and heat shrink to complete the splice. Battery terminal covers are also included.

Dodge High Idle Kit

‘07-‘18, 5.9L & 6.7L BD-1036622:  $255.00 ‘05-‘06, 5.9L BD-1036621:  $265.00 ‘03-‘04, 24V BD-1036620:  $265.00 (for trucks with bellcrank mounted TPS.)

‘98.5-‘02, 24V ‘14-‘18, EcoDiesel

Warm the engine in your Dodge Cummins truck faster on cold mornings with this High Idle Kit. Quick and easy to install.

Here are the part numbers that you’ll need. ‘07.5-‘09, 6.7L BAT-DDG35KIT:  $295.00

‘98.5-‘02, 24V BAT-DDG25KIT:  $299.00

‘03-‘07, 5.9L BAT-DDG3KIT:  $315.00

‘94-‘98, 12V BAT-DDG2KIT:  $270.00

BD-1036620:  $237.00 BD-1036622:  $237.00

Rotating switch allows for adjustable high idle speeds 900/1200/1500/1800/2100 RPM.

The battery cable kits include the following cables: • Negative to frame (2) • Positive to Positive crossover • Positive to starter

Transmission Valve Body Electronics Upgrade Kit (‘00-‘07, 5.9L) BD-1060605:  $219.00

A leading cause of faults with the 47RE/48RE transmission is the failed plastic governor pressure transducer. The BD kit replaces this with a durable metal unit, includes an electronic adapter to prevent over pressure codes and has a built-in temperature sensor for reliability.

Battery Terminals POSITIVE Post (Red) UBT-840P:  $14.99

NEGATIVE Post (Black) UBT-840N:  $14.99

If the original battery terminals in your Ram truck are broken or corroded, replace them with these heavy-duty battery terminals. They clean up the engine bay nicely.

24 l Ram Turbo Diesel Parts & Accessories  #101

Geno’s Garage Tune Saver (‘96-‘18) GG-TUNESVR $45.00

This tune saver is designed to keep unauthorized persons from accessing your truck’s computer through its OBDII port. It prevents such things as changing programming, changing performance parameters or accessing vehicle specific data such as key codes.

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


6.7L 2500/3500/4500/5500 DRM620058:  $109.00  NEW!

Restore the clutch-driven fan to original functioning and sustain proper engine operation with this cooling fan blade. Its construction features reinforcement that reduces blade flexing at operating temperatures, improving thermal stability.

CUMMINS Water Pump (‘13-‘18, 6.7L) *Post-recall design Includes replacement water pump O-ring.

5521882 $49.95

GATES Water Pump (‘13-‘18, 6.7L) Includes replacement water pump O-ring.

GATES-42133 $68.95

GATES Water Pump (‘07.5-‘12, 6.7L) Includes replacement water pump O-ring.

GATES-42291 $69.95

CUMMINS Water Pump (‘07.5-‘12, 6,7L) Includes replacement water pump O-ring.

2881804 $165.00

GATES Water Pump (‘98.5-‘07, 5.9L 24V) Includes replacement water pump O-ring.

GATES-43526 $39.95

CUMMINS Water Pump (‘03-‘07, 5.9L 24V) Includes replacement water pump O-ring.

2881805 $160.00

COOLING FAN BLADE (‘03-’10)

‘03-‘09, 5.9L & 6.7L 2500/3500 ‘08-‘10, 6.7L 3500/4500/5500 Chassis Cab DRM620065:  $109.95

Restore the clutch-driven fan in your ‘03-’10 Ram Cummins truck to original functioning and sustain proper engine operation with Dorman’s plastic engine cooling fan blade. Its construction features reinforcement that reduces blade flexing at operating temperatures, improving thermal stability.

AFTERMARKET COOLING FAN & EXTENSION ADAPTER (‘94-’02) FAN-9402:  $317.25

Mopar has discontinued its cooling fans for the ‘89-‘02 Turbo Diesel trucks. Those looking for a replacement end up paying a hefty sum for a used one. This fan is similar to the metal hub with plastic blades fans used in the 2003 and newer Ram trucks. This fan has nine blades instead of seven like the original. The original fan was 22” in diameter and this new model is 20” which flows 39% more compared to the OEM fan. The fan blades are thicker than the original and come back closer to the engine. Therefore, the fan will not work with trucks with aftermarket harmonic dampers and other accessories protruding from the front of the engine without the use of the included spacer.

GATES Water Pump (‘89-‘98, 12V) Includes replacement water pump O-ring.

GATES-41181 $41.95

CUMMINS Water Pump (‘89-‘02) Includes replacement water pump O-ring.

3286278 $129.95

ENGINE PARTS • COOLING SYSTEM

COOLING FAN BLADE (‘10-’12)

Made in the U.S.A. and comes with a one-year manufacturer warranty.

Steel Fan Blade (‘90-’02, 5.9L)

DRM620066: $109.95

The fan blade on these trucks typically fails due to a crack at a fan blade. The Dorman fan blade features thicker fan blades to reduce flexing. Dorman’s repair solution consolidates two different radiator fan blades into one unique part, for broader vehicle application coverage.

MOPAR Fan Clutch (‘03-‘18, 5.9L & 6.7L)

‘13-‘18 52014729AC $285.00 ‘11-‘12 68155609AA $475.00 ‘04.5-‘10 55056990AC $449.00 ‘03-‘04 52028879AF $456.00

MOPAR Fan Clutch (‘00-‘02, 24V)

52028894AA $199.95

MOPAR Fan Clutch (‘98.5-‘99, 24V)

52028615AB $165.00

MOPAR Fan Clutch (‘91.5-‘98, 12V)

52028760 $184.95

GATES Fan Hub Assembly (‘03-‘12, 5.9L/6.7L)

FB1001 $129.95

GATES Fan Hub Assembly (‘94-‘02, 5.9L)

FB1002 $129.95

NSK OEM Fan Hub Bearing (‘89-‘18)

NSK-BD35 $46.00

Catalog good through October 2018 l Prices subject to change without notice.

GATES 190° Stock Thermostat Kit (‘98.5-‘09 & ‘13-‘18, 5.9L & 6.7L) Includes seal.

GATES-33915 $16.95

GATES 180° Thermostat Kit (‘98.5-‘09 & *‘13-‘18, 5.9L & 6.7L) Includes seal. *Alternate thermostat for ‘13-‘18.

GATES-33956 $16.95

GATES 200° Stock Thermostat Kit (‘10-‘12, 6.7L) Includes seal.

GATES-34212 $17.95

GATES 180° Stock Thermostat Kit (‘94-‘98, 5.9L 12V) Includes 2 seals.

GATES-33888KIT $18.95

GATES 180° Stock Thermostat Kit (‘89-‘93) Includes seal.

GATES-33758KIT $9.95

GATES 16 psi Radiator Cap (‘94-‘10)

GATES-31528 $3.95

GATES 16 psi Stock Radiator Cap (‘89-‘93)

GATES-31523 $3.95

CUMMINS Lower Radiator Inlet Hose Adapter Ring Seal (‘94-‘18) For inlet hose to engine block.

Aftermarket Coolant Reservoir Tank (‘04.5-‘09) Cap and tubing included.

3906697 $3.70

REPD161314 $26.00

Order 770-886-2500 or genosgarage.com

l 25


EXHAUST MANIFOLDS & EXHAUST TIPS

Direct Replacement Exhaust Manifolds

We found these aftermarket exhaust manifolds (read: made in China) that we can offer at a great price. The manifold kits even include six engine-to-manifold gaskets, turbo studs, and a turbo gasket (over a $45 value.) The drawback? You might want to use a die grinder to clean up the rough casting around the ports. ‘07.5-‘12, 6.7L DRM674895: $399.00

OEM Exhaust Manifolds If you look into the engine compartment of your Dodge Cummins Turbo Diesel and find it dirty with soot, it is a good indication that the exhaust manifold is cracked. Replace it with a Cummins OEM manifold. ‘13-‘18, 6.7L Cab/Chassis 5288809:  $520.00 NEW!

Pulse Exhaust Manifolds

‘07.5-‘17, 6.7L (2-Piece Manifold) BD-1045965:  $495.00 ‘07.5-‘17, 6.7L (Gasket Set) BD-1045992:  $75.00

‘07.5-‘12, 6.7L Cab/Chassis 5303009:  $425.00 NEW! ‘03-‘07, 5.9L 4931223:  $219.00 ‘03-‘07, 5.9L DRM674910: $279.00 ‘99-‘02, 24V 5254373:  $235.00 ‘98.5-‘02, 24V DRM674602: $171.00

‘89-‘98, 12V 3911349:  $582.00

Works on trucks with or without EGR.

Exhaust Manifold Stud Kits

HEAVY-DUTY EXHAUST PIPE CLAMP

ROUND BAND, DOUBLE SADDLE 4” HD19A400Z:  $3.95

5” HD19A500Z:  $4.50

TORCTITE STAINLESS STEEL EXHAUST PIPE CLAMP

PREFORMED LAP JOINT CLAMPS 3.5” HD20S350:  $7.25

NOTE: The BD Pulse 24-Valve manifold DOES NOT require any drilling for studs.

‘98.5, 24V 3937187:  $550.00

‘89-‘98, 12V DRM674527: $146.00

3.5” HD19A350Z:  $3.95

‘03-‘07, 5.9L (2-Piece Manifold) BD-1045987:  $495.00

4” HD20S400:  $7.25

5” HD20S500:  $7.25

‘89-‘98, 12V with aftermarket ATS or BD manifold STUDKIT8905:  $58.00 ‘98.5-‘07, 24V with stock or aftermarket manifold STUDKIT8905_A:  $58.00

Save yourself the frustration of trying to line the gaskets up with the manifold and cylinder head using the OEM bolts. Install this stud kit, hang your exhaust manifold gaskets on the studs and then install the manifold. Kit comes with studs and nuts required for a complete installation.

‘04.5-‘07

Will not work on Cab & Chassis trucks.

Does not work on ‘89-‘98, 12-valve engines when the stock manifold is reused because the studs are too short.

CUSTOM EXHAUST TIPS

4” TO 5” STAINLESS STEEL Rolled Edge ANGLE CUT Tip

4” ID × 5” OD × 12” L DP-405012RSL:  $45.99 ‘03-‘04

Muffler Elimination Kits  I

‘94-‘02

‘07.5-‘12, 6.7L  ME-KIT-DG07:  $55.95 ‘04.5-‘07, 5.9L  ME-KIT-DG045:  $71.95 *Will not work on Cab & Chassis trucks

‘03-‘04, 5.9L ME-KIT-DG03: $71.95 ‘94-‘02, 5.9L ME-KIT-DG9402: $71.95 NOTE: Does not replace resonator or catalytic converter.

These kits are designed to replace the existing muffler assembly and include a custom bent exhaust pipe and exhaust clamp(s). Exhaust noise increases 5-8 decibels compared to stock muffler equipped truck.

26 l Ram Turbo Diesel Parts & Accessories  #101

Manifold gaskets for ‘89-‘07 included at no extra charge.

‘89-‘98, 12V (3-Piece Manifold) BD-1045948:  $495.00

BD’s Pulse exhaust manifolds are cast from high-silicon ductile iron which can withstand extremely high temperatures, as well as the additional weight created by bigger single or twin turbo systems. Expansion joints allow the manifold to expand and contract.

NOTE: Kits do not have studs for the turbo-to-manifold connections.

An exhaust tip puts the final touch on your Ram Turbo Diesel’s exhaust system. Exhaust tips come with all mounting hardware. High Quality T304 Mirror Polished Stainless Steel Will Not Rust • No Welding Necessary

‘07.5-‘12

‘98.5-‘02, 24V (3-Piece Manifold) BD-1045947:  $495.00

STAINLESS STEEL DUAL WALL Angle Cut Tip

4” ID × 5” OD × 12” L DP-405013AC:  $52.99 NOTE: Tailpipe may have to be shortened when installing this exhaust tip.

18” STAINLESS STEEL Turn Down Tip

4” ID × 4” OD × 18” L DP-404018TD:  $52.99

14” STAINLESS STEEL Turn Down Tip

5” ID × 5” OD × 14” L DP-505016TD:  $72.99

V-BAND CLAMPS DOWNPIPE-TO-CAST ELBOW ‘07.5-‘18, 6.7L 52121859AD:  $54.95 (Gasket not included. Get 68071676AA)

DOWNPIPE-TO-CAST ELBOW ‘04.5-‘07, 5.9L 52121285AA:  $24.95 DOWNPIPE-TO-CAST ELBOW ‘03-‘04, 5.9L 52103596:  $22.95

V-BAND CLAMPS CAST IRON ELBOW-TO-TURBO ‘13-‘18, 6.7L 3905216:  $43.95 TURBINE HOUSING-TO-COMPRESSOR HE341/HE351 TURBO ‘03-‘07, 5.9L 3595658:  $36.00 TURBINE HOUSING-TO-CAST ELBOW ‘03-‘07, 5.9L 3535399:  $39.95 DOWNPIPE-TO-CAST ELBOW ‘89-‘98, 12V 4428550:  $31.95

V-BAND CLAMPS DOWNPIPE-TO-CAST ELBOW ‘04.5-‘07, 5.9L DRM904354:  $18.95 (Gasket not included. Get 68071676AA)

DOWNPIPE-TO-CAST ELBOW ‘03-‘04, 5.9L DRM904253:  $19.95

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


No voltage for “START”? Chances are that the solenoid is okay. Check the relay, fuseable link or fuse #9 as the source of the electrical malfunction.

No voltage for “START” tells you to check the relay to the solenoid (Item 1).

Also check the fuseable link that feeds the solenoid (Item 2) or fuse #9 in the fuse panel.

ENGINE ACCESSORY REBUILD KITS Starter Solenoid Rebuild Kit (‘89-‘06)  Designed to carry twice the amperage

load for easier starting and longer life. The SuperSize Contacts fit perfectly and are a replacement for the common problem of sticking and clicking stock starter contacts in ‘89-‘06 starters. H TDR78, p92-93

Battery Side

Starter Stud Repair Kit (‘89-‘02)  Occasionally a loose battery cable at the

Motor Side

starter can cause arcing/corrosion and the starter stud may be damaged causing difficult removal. Replace the starter stud with this kit if it is damaged. Kits include copper stud with knurl for battery cable connection, washer, nut, O-ring and all insulators. Fuel Shutoff Solenoid, Bracket and Relay (‘94-‘98)  The P7100 pump on the

‘94-‘98 Dodge/Cummins 12-valve engine utilizes a 12-volt electric solenoid that, over time, may stop functioning. Get a replacement solenoid to keep on hand in case your truck runs into trouble. SPECIAL: Mounting Bracket and Fuel Shutoff Relay included with this solenoid kit. Fuel Solenoid Saver Diode (‘94-‘98)  Save the fuel solenoid from burning up

if the starter sticks on.

65 amp Fusible Link (‘94-‘98)  Protection for the power supply to the fuel

PLUNGER • CONTACTS • INSTALL DVD GD-G11SKIT:  $29.99

BATTERY SIDE STUD KIT GD-2791: $19. 95

MOTOR SIDE STUD KIT GD-3160: $19. 95

SOLENOID, BRACKET & RELAY SA-4981-12:  $85.95

SS99:  $24.50

FL90:  $13.85

shutoff solenoid.

Fuel Shutoff Relay (‘94-‘98)  This 70 amp relay activates the fuel solenoid.

SS70A:  $13.95

Fuel Solenoid Replacement Boot (‘94-‘98)  Replace a torn boot on the fuel

shutoff solenoid and help prevent damage to it. H TDR74, p94-96

SA-4153:  $9.95

BOSCH REBUILD KIT (‘08-‘10, 6.7L)

BOSCH Kit

Alternator Rebuild Kits  The most common problem with an alternator is that the

brushes wear out. Without brush-to-armature contact there is no electrical charge. Some truck owners replace alternators. Budget conscious owners rebuild the alternator with new brushes and bearings prior to complete failure. H TDR74, p94-96

PLUNGER & CONTACTS GD-G11S:  $19.95

REBUILD KITS & REPLACEMENT PARTS

NO START TIP (‘94-‘98 12-valve engines) Should the fuel START/RUN solenoid fail to energize (come up) and/or hold in the “UP” position, do not let its malfunction leave you stranded. Have an assistant attempt to start your truck while you move the solenoid’s plunger up to the “RUN” position. If it starts and the solenoid holds in the “RUN” position, drive it to your destination for further troubleshooting as time permits. If the solenoid fails to hold in the “RUN” position, tie-wrap it in the “RUN” position, and drive it to your destination. Cut the wrap, and the engine will stop. So, we presented a tip to get you to a desired location. Does the problem lie with the solenoid, the relay to the solenoid, the fuseable link that feeds the solenoid or a fuse? Do a voltage check at the solenoid’s three-wire connector. Negative goes to the Black/Red trace wire. On “START”, positive 12-volts will be at the Red/Black trace wire. If voltage is present for “START” the solenoid is likely the problem.

Rebuild kit for ‘08-‘10 trucks fits Bosch alternators only.

GD-ARK-BOSCH01308: $39.99

BOSCH REBUILD KIT (‘03-‘07, 5.9L)

GD-ARK-0307BOSCH: $34.99

BOSCH REBUILD KIT (‘98-‘02) GD-ARK-BOSCH: $34.99

DENSO REBUILD KIT (‘89-‘02)

DENSO Kit

GD-ARK-DENSO: $34.99

Vacuum Pump Reseal Kit (‘91.5-‘02)  This kit repairs the engine oil leak where

the power steering pump joins the vacuum pump. This is a common leak since the seal inside the vacuum pump ages with time. Why buy a new vacuum pump when you can rebuild it?

Rebuild kits come with DVD instructions, written instructions, a modified seal, extra O-rings, and a Cummins gasket to reinstall the pump to the engine. Vacuum Pump Seal Kit (‘91.5-‘02)  This kit includes only the vacuum pump seals and is designed for those experienced in vacuum pump repair.

REBUILD KIT (‘96-‘02) GD-VPRK-9602:  $59.99

REBUILD KIT (‘91.5-‘95) GD-VPRK-9195:  $59.99

GD-GG03XP-VPSK:  $31.99

Extra O-rings and a dual lip seal are included in the kit.

Replacement Vacuum Pump Fiber Vane Set (‘91.5-‘02)

Catalog good through October 2018 l Prices subject to change without notice.

GD-10FV: $24.00

Order 770-886-2500 or genosgarage.com

l 27


REBUILD KITS & REPLACEMENT PARTS

1989-1993 FIRST GENERATION CUMMINS Engine Heater (‘89-‘98, 12V) This engine block heater is installed into a freeze plug on the side of the block. Rated at 750w.

1994-2002 SECOND GENERATION 3916127 $65.95

CUMMINS Engine Heater (‘89-‘98, 12V) This engine block heater is installed into a freeze plug on the side of the block. Rated at 750w.

3916127 $65.95

3975628 $33.00

MOPAR Bellcrank Throttle Bushings  (‘89-‘98, 12V) 2 required per vehicle.

4425053 $7.75 each

CUMMINS Engine Heater  (‘98.5 -‘18, 5.9L & 6.7L) This engine block heater is threaded directly into the engine block. Rated at 750w.

DORMAN Throttle Position Sensor  (‘90-‘93)

DRM904342 $172.95

FLEETGUARD Engine Block Heater Cable  (‘89-‘18, 5.9L & 6.7L)

Rated at 750w.

HEATER_ CABLE_FL $18.95

RELAY-75565 $19.95

AFTERMARKET Throttle Position Sensor (‘98.5-‘04, 24V) This TPS fits trucks equipped with either a manual or automatic transmission. Once installed, calibration is required.

TPS98502 $169.00

AFTERMARKET Grid Heater Relay (‘89-‘02)

(Instructions included.)

H TDBG Vintage, ‘94-‘04 Lock/Unlock

CUMMINS Intake Air Temperature Sensor  (‘89-‘97)

3918461 $55.95

CUMMINS Throttle Position Sensor  (‘94-‘98, 12V)

CUMMINS Thermo Switch (‘89-‘93)

4327029 $51.95

BD APPS Noise Isolator  (‘94-‘04, 5.9L) Interference in the throttle position sensor circuits (APPS) on Dodge Cummins engines from ‘94 to ‘04 will create false voltage readings in the APPS/TPS circuit and cause the lock-up torque converter to rapidly cycle on and off as you drive. This part removes the RF interference.

BD-1300030 $29.00

MOPAR Throttle Cable  (‘98.5-‘02)

53031626AC $39.95

CUMMINS 3-wire Connector Repair Kit (‘89-‘93 & ‘94-‘97) Fits 4327029 and TPS3930318

3823255 $13.95

CUMMINS Coolant Temperature Sensor  (‘92-‘97)

3920363 $65.95

CUMMINS Coolant Temperature Sensor  (‘89-‘91) For non-intercooled engines.

3912074 $33.95

CUMMINS Oil Pressure Sensor (‘90-‘98) 12-valve, 2 prong connector

3923200 $56.95

CUMMINS Speed/Crank Position Sensor  (‘89-‘97)

3924432 $89.95

GATES Tensioner Pulley (‘89-‘02)

GATES Tensioner Pulley Assembly (‘89-‘02)

GATES-36094

$18.25

GATES-38157

TPS3930318 $198.95

MOPAR Throttle Cable Package  (‘94-‘98, 12V) With engine serial number prior to 56257916 or 45308491. Includes upgraded throttle cable and bell crank lever.

4897406AA $42.95

MOPAR Throttle Cable Package  (‘94-‘98, 12V) With engine serial number with and/or greater than 56257916 or 45308491. Includes upgraded throttle cable and bell crank lever.

4897407AA $72.95

CUMMINS Crankcase Vent Filter  (‘98.5-‘02) O-ring is included.

3944961 $51.95

CUMMINS Replacement Crankcase Vent Filter O-ring  (‘98.5-‘02)

3903475 $3.95

CUMMINS Grid Heater Kit (‘98.5-‘07) Includes (2) 3969988 gaskets for installation.

3969987-KIT $118.95

DORMAN Grid Heater Relays (‘97-‘02)

DRM904308 $48.95

AFTERMARKET Grid Heater Relay (‘89-‘02)

RELAY-75565 $19.95

$52.95

CUMMINS Tappet Cover Bolt Grommet/Seal (‘89-‘98, 12V) (6 grommets/seals required per cover.)

3900267 $4.00 each

CUMMINS Replacement 12-valve Engine Nameplate Grommet (‘91.5-‘98)  (2 required.)

3923206 $7.95 each

CUMMINS AFC Boost Reference Line (‘89-‘93) Attaches to VE pump diaphragm. Requires 2 sealing washers (3918188). See page 37.

3282437 $43.95

CUMMINS Engine Oil Dipstick  (‘89-‘93)

3916850 $139.95

28 l Ram Turbo Diesel Parts & Accessories  #101

H TDR 83, p92-93: How to Calibrate

BD HX35 Turbocharger Adjustable Wastegate Actuator (‘99-‘02) Will not work on HY35 Turbo.

BD-1047151 $185.00

BD Adjustable Wastegate Actuator (‘94-‘98.5) On 1998.5 trucks with HX35 Turbo only.

BD-1047150 $185.00

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


1994-2002 SECOND GENERATION

CUMMINS MAP Sensor  (‘01-‘02) *‘02 trucks require 3104228 adapter.

4921505 $92.95

CUMMINS MAP Sensor Wiring Harness  (‘02) *Required for 4921505 on ‘02 trucks.

3104228 $18.95

CUMMINS MAP Sensor  (‘98.5-‘00)

4921497 $72.95

CUMMINS MAP Sensor Wiring Harness  (‘98.5-‘00) For 4921497 on ‘98.5-‘02 trucks.

GATES Tensioner Pulley Assembly (‘89-‘02)

GATES Accessory Drive Belt Kit (‘94-‘02, 5.9L) Kit includes heavy-duty replacement serpentine belt and tensioner assembly.

GATES-38157

$52.95

NEW! GATES-90K38157A $75.95

CUMMINS Valve Cover Isolator/Seal (‘98.5-‘02, 24V) (5 seals required per valve cover.)

3946168 $11.95 each

CUMMINS Tappet Cover Bolt Grommet/Seal (‘98.5-‘02, 24V) (6 grommets/seals required per cover.)

3928759 $4.00 each

CUMMINS Tappet Cover Bolt Grommet/Seal (‘89-‘98, 12V) (6 grommets/seals required per cover.)

3900267 $4.00 each

CUMMINS Replacement 12-valve Engine Nameplate Grommet (‘91.5-‘98)  (2 required.)

3923206 $7.95 each

3824256 $12.95

CUMMINS Intake Air Temperature Sensor  (‘98.5-‘02)

3408345 $46.95

CUMMINS Intake Air Temperature Sensor  (‘98, 12V)

3932272 $57.95

CUMMINS Intake Air Temperature Sensor  (‘89-‘97)

3918461 $55.95

CUMMINS Coolant Temperature Sensor  (‘98.5-‘02) & (‘04.5-‘18)

4954905 $10.95

CUMMINS Engine Oil Dipstick and Handle  (‘01-‘02, 24V) Blade style. Length: 47”

3937748 $8.95

CUMMINS Coolant Temperature Sensor Wiring Harness  (‘98.5-‘02) & (‘04.5-‘18)

5394261 $33.95

CUMMINS Dipstick Tube  (‘01-‘02, 24V) This dipstick tube is for use with #3937748.

3937749 $56.95

CUMMINS Coolant Temperature Sensor  (‘98, 12V)

3920364 $50.95

CUMMINS Engine Oil Dipstick and Handle  (‘98.5-‘00, 24V) Blade style. Length: 44”

3935648 $34.95

CUMMINS Coolant Temperature Sensor  (‘92-‘97)

3920363 $59.95

CUMMINS Engine Oil Dipstick and Handle  (‘96-‘98, 12V) Blade style. Length: 45”

3923128 $30.95

CUMMINS Oil Pressure Sensor  (‘98.5-‘02) (24-valve, 3 prong connector)

4326849 $88.95

MOPAR Oil Pressure Sensor (‘94-‘98) (12-valve, 2 prong connector)

CUMMINS Oil Pressure Sensor (‘90-‘98) (12-valve, 2 prong connector)

CUMMINS Cam Position Sensor  (‘98.5-‘02)

56031005 $59.95

4921597 $55.95

MOPAR Speedometer Sensor with Pinion and Wiring Adapter (‘93-‘97) 3 wire sensor and hard wiring is required.

CUMMINS Replacement Oil Cap (‘89-‘98, 12V) 3823254 $14.50

CUMMINS Crank Position Sensor  (‘98.5-‘02) ‘01-‘02 trucks should not have a CPS so check by the starter before ordering.

4921601 $64.95

CUMMINS Speed/Crank Position Sensor  (‘89-‘97)

CUMMINS Engine Oil Dipstick and Handle  (‘94-‘95, 12V) Blade style. Length: 45”

52107769AE $43.95

3928740 $62.95

3923200 $56.95

CUMMINS Cam Position Sensor Wiring Harness  (‘98.5-‘02) For cam position sensors #4921601 & #4921597

CUMMINS Speed/Crank Position Sensor  (‘97-‘98, 12V)

MOPAR Transmission Oil Dipstick  (‘94-‘02) 46RH, 46RE and 47RE

REBUILD KITS & REPLACEMENT PARTS

1994-2002 SECOND GENERATION

3923129 $98.95

3924432 $89.95

Catalog good through October 2018 l Prices subject to change without notice.

DORMAN Power Steering Reservoir Cap (‘89-‘02)

5013660AA $34.95

4962608_KIT $17.95

DRM82577 $5.95

DORMAN Hood Pad Retaining Clip (‘94-‘18) These plastic hood insulation pad clips are constructed of high-quality materials for long-last durability. 15 clips required per vehicle.

NEW! DRM963571 $2.95 Sold as a pair.

MOPAR Hood Pad Retaining Clip (‘94-‘02) With age the hood pad retaining clips can break and the hood pad will droop into the engine compartment. Replace the clips and put the hood pad back where it belongs. 15 clips required per vehicle.

6003351 $4.95 Sold individually.

Order 770-886-2500 or genosgarage.com

l 29


REBUILD KITS & REPLACEMENT PARTS

2003-2009 THIRD GENERATION CUMMINS Engine Heater  (‘98-‘18, 5.9L & 6.7L) This engine block heater is threaded directly into the engine block. Rated at 750w.

MOPAR Accelerator Pedal Throttle Position Sensor (TPS) with Pedal (‘09-‘18) For trucks with a G56 or 68RFE transmission. Two TPS versions for these years. Check which TPS you have in your truck before purchase of new part.

MOPAR Accelerator Pedal Throttle Position Sensor (TPS) with Pedal (‘09-‘18) For trucks with G56, Aisin 69RC or 68RC transmission. Two TPS versions for these years. Check which TPS you have in your truck before purchase of new part.

MOPAR Accelerator Pedal Position Sensor (TPS) with Pedal (‘07-‘08)

MOPAR Accelerator Pedal Position Sensor (TPS) with Pedal (‘05-‘06)

MOPAR Throttle Position Sensor (‘03-‘04) Mounts beneath the driver’s side battery. For manual transmission trucks.

AFTERMARKET Throttle Position Sensor (‘98.5-‘04, 24V) This TPS fits trucks equipped with either a manual or automatic transmission. Once installed, calibration is required. ( Instructions included.)

I

NOTE: Only works on trucks equipped with APPS installed on bellcrank assembly, not under the driver’s side battery.

I

BD APPS Noise Isolator  (‘94-‘04, 5.9L) Remove the interference in the throttle position sensor circuits (APPS) on Dodge Cummins engines from ‘94 to ‘04 that will create false voltage readings in the APPS/ TPS circuit and cause the lock-up torque converter to rapidly cycle on and off as you drive.

2003-2009 THIRD GENERATION 3975628 $33.00

5265106 $20.95

CUMMINS Crankcase Breather Vent Tube  (‘03-‘05, 5.9L) Replace the vent tube when the rubber couplers tear or get brittle and break due to age (Large).

5265108 $22.95

CUMMINS Crankcase Pressure Sensor  (‘07.5-‘18, 6.7L) Mounted on top of valve cover behind CV filter.

4984575 $49.95

CUMMINS Intake Air Temperature Sensor(‘07.5-‘18, 6.7L)

2897332 $49.95

CUMMINS Intake Air Temperature Sensor/MAF (‘03-‘07, 5.9L)

4984570 $52.95

CUMMINS Diesel MAP Sensor  (‘03-‘07, 5.9L)

3971106 $77.95

CUMMINS Diesel MAP Sensor  (‘07.5-‘18, 6.7L) Mounted in intake plenum.

2897333 $35.95

CUMMINS Diesel MAP Sensor Repair Connector  (‘07.5-‘18, 6.7L) For Sensor #2897333

5299163 $57.95

TPS68043161AD $156.95

TPS53034160AE $193.95

TPS53034003AC $184.95

TPS53032794AB $174.95

TPS53032456AE $289.00

TPS98502 $169.00 H TDBG, Vintage ‘94-‘04 Lock/Unlock

CUMMINS Air Intake Grid Heater Kit (‘98.5-‘07) Includes (2) 3969988 gaskets for installation.

3969987-KIT $118.95

MOPAR Grid Heater Relay (‘06-‘18) (1) required per vehicle.

5187880AC $53.95

DORMAN Grid Heater Relay (‘06-‘18)

DRM904300 $34.95

MOPAR Air Intake Grid Heater Relay (‘03-‘05) (2) required per vehicle.

68188370AA $35.95

DORMAN Grid Heater Relay (‘03-‘05) (2) required per vehicle.

DRM904356 $25.95

MOPAR EGR Exhaust Gas Temperature Sensor (‘07.5-‘12, 6.7L)

5149085AC $39.95

CUMMINS EGR Exhaust Gas Temperature Sensor (‘07.5-‘18, 6.7L)

2872858 $47.95

BD-1300030 $27.00

DORMAN Throttle Pedal and Shift Linkage Bushing Kit (‘03-‘09) Assorted bushings.

NEW! DRM14041 $4.95

CUMMINS Crankcase Vent Filter  (‘07.5-‘18) Replaces the filter on top of the valve cover assembly. The suggested change interval is 67,500 miles.

CV520010 $69.95

CUMMINS Crankcase Vent Filter  (‘03-‘05) Replaces the filter on top of the valve cover assembly.

3957987 $61.95

CUMMINS Diesel Particulate Filter (DPF) Pressure Sensor  (‘07.5-‘12, 6.7L)

4995187 $99.00

30 l Ram Turbo Diesel Parts & Accessories  #101

CUMMINS Crankcase Breather Oil Drain Tube  (‘03-‘05, 5.9L) Replace the oil drain tube when the rubber couplers tear or get brittle and break due to age (Small).

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


2003-2009 THIRD GENERATION

CUMMINS Exhaust Pressure Sensor (‘07.5-‘18, 6.7L)

4928594 $109.00

DAYCO Tensioner Pulley (‘03-‘18, 5.9L & 6.7L)

CUMMINS Crank/Cam Position Sensor (‘03-‘18, 5.9L & 6.7L)

2872277 $23.95

CUMMINS Idler Pulley (‘03-‘18, 5.9L & 6.7L)

CUMMINS Coolant Temperature Sensor  (‘98.5-‘02) & (‘04.5-‘18)

4954905 $10.95

GATES Idler Pulley (‘03-‘18)

GATES-36315 $54.95

CUMMINS 2-wire Connector Repair Kit  (‘98.5-‘02) & (‘04.5-‘18) Fits 4954905.

3163923 $32.95

GATES Tensioner Assembly (‘03-‘18, 5.9L & 6.7L)

GATES-38285 $79.95

CUMMINS Coolant Temperature Sensor (‘03-‘04)

4897224 $34.95

CUMMINS Oil Pressure Sensor  (‘07-‘18)

2882074 $49.95

CUMMINS Oil Pressure Sensor  (‘03-‘06)

4076930 $13.95

CUMMINS Turbo Speed Sensor  (‘07.5-‘12, 6.7L)

5327846 $187.95

CUMMINS Turbo Speed Sensor Wiring Harness  (‘07.5-‘18, 6.7L) For speed sensors #5327846 & #4034198.

3164369 $28.00

GATES Tensioner Assembly (‘03-‘12, 5.9L & 6.7L)

CUMMINS Stock Turbo Wastegate Solenoid  (‘04.5-‘07, 5.9L)

BD Wastegate Actuator Kit (‘03-‘07, 5.9L)

4036054 $490.00

BD-1047154 $185.00

GATES Accessory Drive Belt Kit (‘03-‘12, 5.9L & 6.7L) Kit includes heavy-duty replacement serpentine belt, belt tensioner/idler pulley assembly.

OEM Vacuum Pump Diaphragm for Jacobs Exhaust Brake (‘03-‘07, 5.9L) 1 year manufacturer warranty.

OEM Heavy-Duty Vacuum Pump Diaphragm for Jacobs Exhaust Brake (‘03-‘07, 5.9L)  1 year manufacturer warranty.

OEM Vacuum Pump for Jacobs Exhaust Brake (‘03-‘07, 5.9L) With pulley. Instructions included. 1 year manufacturer warranty.

DAYCO_89094 $20.45

4946708 $37.95

3947574 $94.95

NEW! GATES-90K38285 $165.95

SALE PRICE! GD_GG09_ DIPH_0307 $79.95

REBUILD KITS & REPLACEMENT PARTS

2003-2009 THIRD GENERATION

SALE PRICE! GD_GG09_HDDIPH $99.95

SALE PRICE! GD_GG09_ 0307_PUMP $219.00

MOPAR Battery Temperature Sensor  (‘03-‘09)

When diagnosing a Ram Diesel with a P0514 fault code, be aware that replacing the Battery Temperature Sensor will not always correct this. Software for 2006 applications is now available - see TSB 18-005-06 Rev. B. Software to correct 2005 and older applications is found on TSB 18-022-06. See your local dealer for software update.

MOPAR Transmissions Dipstick  (‘03-‘07, 5.9L) 47RE and 48RE

56041053AA $43.95

OEM Vacuum Pump with Heavy-Duty Diaphram for Jacobs Exhaust Brake (‘03-‘07, 5.9L) With pulley. Instructions included. 1 year manufacturer warranty.

SALE PRICE! GD_GG09_HDPUMP $224.00

53032605AB $19.95 DORMAN Windshield Washer Fluid Reservoir (‘03-‘09, 2500/3500)

DRM603214 $54.95

CUMMINS Engine Oil Dipstick/Handle  (‘03-‘07, 5.9L) Flat blade style. Length: 44.5”

3959009 $9.95

CUMMINS Engine Oil Dipstick/Handle  (‘07, 5.9L) Cable style. Length: 41”

3974104 $74.95

CUMMINS Replacement Oil Cap (‘98.5-‘18)

CUMMINS Engine Oil Dipstick and Handle  (‘07.5-‘18, 6.7L) Cable style. Length: 42”

4938970 $24.95

MOPAR Power Steering Pump Reservoir Cap (‘03-‘07)

CUMMINS Spring Hose Clamp (‘06-‘07, 5.9L) Use with heater hose #4939438 (page 4). (Mopar #5179115AA)

4930327 $4.00

MOPAR Hood Strut (‘03-‘09)

55276321AC $37.95 each

CUMMINS Spring Hose Clamp (‘03-‘07, 5.9L) Use with heater hose #3967022 & #3820663 (page 4). (Mopar #5086819AA)

3930310 $4.00

DORMAN Hood Pad Retaining Clip (‘94-‘18) These plastic hood insulation pad clips are constructed of high-quality materials for long-last durability.

NEW! DRM963571 $2.95 Sold as a pair.

Catalog good through October 2018 l Prices subject to change without notice.

3973511 $6.95

MOP-52106856AC $17.95

Order 770-886-2500 or genosgarage.com

l 31


REBUILD KITS & REPLACEMENT PARTS

2010-2018 FOURTH GENERATION

2010-2018 FOURTH GENERATION

CUMMINS Engine Heater  (‘98.5-‘18, 5.9L & 6.7L) This engine block heater is threaded directly into the engine block. Rated at 750w.

3975628 $33.00

CUMMINS Turbo Speed Sensor  (‘13-‘18, 6.7L)

4034198 $184.95

CUMMINS Crankcase Vent Filter  (‘07.5-‘18, 6.7L) Replace the filter on top of the valve cover assembly. The suggested change interval is 67,500 miles.

CV520010 $69.95

CUMMINS Turbo Speed Sensor  (‘07.5-‘12, 6.7L)

5327846 $187.95

CUMMINS DPF Pressure Sensor  (‘07.5-‘12, 6.7L)

4995187 $104.95

CUMMINS Turbo Speed Sensor Wiring Harness  (‘07.5-‘18, 6.7L) For speed sensors #5327846 & #4034198.

3164369 $28.00

CUMMINS Crankcase Pressure Sensor  (‘07.5-‘18, 6.7L) Mounted on top of valve cover behind CV filter.

4984575 $49.95

CUMMINS Oil Pressure Sensor  (‘07-‘18)

2882074 $49.95

CUMMINS Fuel Injector Harness to Valve Cover Harness (‘06 & ‘18, 5.9L & 6.7L)

4918587 $20.45

CUMMINS Lower Radiator Inlet Hose Adapter Ring Seal (‘94-‘18) For inlet hose to engine block.

3906697 $3.70

CUMMINS Engine Oil Dipstick and Handle  (‘07.5-‘18, 6.7L) Cable style. Length: 42”

4938970 $24.95

68RFE Transmission Oil Dipstick  (‘07.5-‘18, 6.7L)

53034117 $18.95

MOPAR Grid Heater Relay (‘06-‘18) One per vehicle.

CUMMINS Mass Flow Sensor  (‘07.5-‘18, 6.7L) Mounted on air filter housing.

MOPAR MAF Sensor Repair Connector  (‘07.5-‘18, 6.7L) Repair connector for Sensor #4984760.

5187880AC $51.95

4984760 $98.95

DAYCO Tensioner Pulley (‘03-‘18, 5.9L & 6.7L) 5013979AB $45.95

CUMMINS Intake Air Temp Sensor (‘07.5-‘18, 6.7L)

2897332 $49.95

CUMMINS Diesel MAP Sensor  (‘07.5-‘18, 6.7L) Mounted in intake plenum.

2897333 $35.95

CUMMINS Coolant Temperature Sensor  (‘98.5-‘02) & (‘04.5-‘18)

4954905 $10.95

CUMMINS 2-wire Connector Repair Kit  (‘98.5-‘02) & (‘04.5-‘18) Works with 4954905.

3163923 $32.95

CUMMINS Crank/Cam Position Sensor (‘03-‘18, 5.9L & 6.7L)

2872277 $23.95

MOPAR Wiring Repair Kit  (‘03-‘18, 5.9L & 6.7L) Works with 2872277.

5014010AB $26.95

CUMMINS Idler Pulley (‘03-‘18, 5.9L & 6.7L)

4946708 $37.95

GATES Idler Pulley (‘03-‘18)

GATES-36315 $54.95

GATES Tensioner Assembly (‘03-‘18, 5.9L & 6.7L)

GATES-38285 $79.95

CUMMINS Tensioner Assembly (‘03-‘18, 5.9L & 6.7L)

3947574 $98.95

GATES Accessory Drive Belt Kit (‘03-‘12, 5.9L & 6.7L) Kit includes heavy-duty replacement serpentine belt, belt tensioner assembly and idler pulley.

NEW! GATES-90K38285 $165.95

MOPAR Hood Strut (‘10-‘18) MOPAR EGR Exhaust Gas Temperature Sensor (‘13-‘18, 6.7L)

DAYCO_89094 $20.45

68085774AB $26.95 DORMAN Hood Pad Retaining Clip (‘94-‘18) These plastic hood insulation pad clips are constructed of high-quality materials for long-last durability.

5160343 $35.95 each NEW! DRM963571 $2.95 Sold as a pair.

MOPAR EGR Exhaust Gas Temperature Sensor (‘07.5-‘12, 6.7L)

5149085AC $39.95

CUMMINS EGR Exhaust Gas Temperature Sensor (‘07.5-‘18, 6.7L)

2872858 $47.95

GATES Tensioner Assembly (‘14-‘18)

GATES-39343 $149.95

CUMMINS Exhaust Pressure Sensor (‘07.5-‘18, 6.7L)

4928594 $109.00

GATES Idler Pulley  (‘14-‘18)

GATES-38018 $12.95

32 l Ram Turbo Diesel Parts & Accessories  #101

2014-2018 RAM 1500 ECODIESEL

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


80 GPH

Download the ‘TDR Buyer’s Guide’ in the Technical Information section of our website for more details.  igh-Performance H Adjustable Fuel Pump ‘10-‘14 FASS-FA-D05-095G: $521.55

Dodge Replacement Fuel Lift Pump (‘98.5-‘04.5)

(1/2” Fuel Line Kit, 1/2” Suction Tube Kit, and Wiring Harness)

‘05-‘09 FASS-FA-D07-095G: $521.55

(1/2” Fuel Line Kit, 1/2” Suction Tube Kit, and Wiring Harness)

‘98.5-‘02  FASS_DRP_02:  $278.35 ‘03-‘04.5  FASS_DRP_04:  $341.05

‘98.5-‘04.5 FASS-FA-D08-095G: $464.55

Includes: (6) banjo gaskets to make install easier.

FASS High-Performance Fuel Pump for ‘98.5-‘04.5 trucks DOES NOT include a draw straw for the fuel tank.

(1/2” Fuel Line Kit and Wiring Harness)

NOTE: The DRP is designed as a stock replacement pump. It will not meet the needs of hi-performance (over 300hp) applications.

The Dodge Replacement Pump (DRP) gives you the dependability of a FASS product without the cost of a complete system. An additional benefit is that fuel flow is increased by 33%. We’re excited to sell the FASS DRP product. Its availability allows us to offer several fuel transfer pump options to our customers. The DRP provides 80gph of fuel. The DRP-02 mounts in the stock location on the side of the engine. The DRP-04 relocates the pump to the side of the truck’s frame below the fuel cannister. The DRP kits come complete with all of the neccessary hardware for the relocation of the pump and instructions to make the installation straightforward. DRP fuel lift pumps are not compatible with waste vegetable oil (WVO) or biodiesel fuels. DRP pump comes with a 4-YEAR WARRANTY from FASS.

VULCAN DRAW STRAW AND THE DRP If the fuel transfer pump has been relocated to the in-tank design (per the Dodge Technical Service Bulletin recommendations), you will need to purchase the Draw Straw to bypass the in-tank module and provide your truck with a fuel pick up location. See page 20. FASS/VULCAN Relocation Bracket

Inline Fuel Filter Screen

FASS_VULCAN BRACKET:  $7.95

FF5079:  $8.50

If you have relocated the existing fuel transfer pump (see our “Vulcan Relo Kit”) you will need a FASS/ VULCAN Relocation Bracket for use with the DRP.

This filter is required when using the DRP with the Vulcan Relo Kit. 3/8” inlets.

FASS Suction Tube Kit (‘89-‘02 & ‘05-‘17) This suction tube kit is designed to help you bypass the in-tank pump. It also works well on older ‘89-‘02 Ram trucks with broken or rusted out fuel fittings. With the flexible straw design, you will not have issues with running out of fuel at 1/4 of a tank like kits with the hard suction tube. Kit works with 3/8” and 1/2” fuel lines.

FASS_STK_1003:  $94.05

 itanium Fuel Pump T and Double Filter

‘05-‘17 FASS-T-D07-095G:  $687.80 (1/2” Fittings, Fuel Line Kit, 1/2” Suction Tube Kit, Wiring Harness and Quick-Install Bolt-on Frame Mounting Bracket) ‘98.5-‘04.5 FASS-T-D08-095G:  $630.80 (1/2” Fittings, Fuel Line Kit and Wiring Harness and Quick-Install Bolt-on Mounting Bracket)

95 GPH

95 GPH

Many owners are concerned with fuel filtration and are wanting to add fuel filters that offer protection as fine as 3 microns. Finer filtration requires a higher capacity fuel transfer pump – a task that the factory transfer pump is not designed to do. This forces the concerned owner to source an aftermarket transfer pump and filter system. We’ve had great success with the FASS pump-only units, so it was a natural progression to add their pump and filter systems. The FASS fuel system offers a reliable high volume pump that provides a consistent flow of fuel (95 GPH) to your injection pump. Each kit comes with a 3 micron fuel filter and fuel/water separator. The FASS Fuel Pump and Filter will support horsepower levels from stock to 600 horsepower. Each kit comes with a LIFETIME WARRANTY from FASS. *See page 5 for FASS replacement fuel filters and fuel/water separators.

Catalog good through October 2018 l Prices subject to change without notice.

The FASS High-Pressure fuel pump kit allows you to place the fuel transfer pump underneath the truck bed frame rail. The kit includes: • Fuel pump • Fuel line • Wiring harness • Installation hardware • Built-in fuel pressure regulator The HPFP fuel pump will support stock to 600 horsepower levels. Fuel pump comes with a LIFETIME WARRANTY from FASS.

FASS Fuel Heater Kit FASS_HK1001:  $151.05

This kit works with FASS Titanium pumps.

FASS Fuel Systems now offer an optional Fuel Heater Kit for Ram Cummins owners who live in extremely cold climates. While the FASS fuel systems are built to start and operate in cold temperatures well below freezing, the FASS Fuel Heater Kit gives you the ability and peace of mind to heat the FASS System to help aid in starting.

Fuel Transfer Pump (‘94-‘98, 12V)  I PUMP_4988747:  $114.95 Includes gaskets and stud kit.

Lift Pump Primer Button Boot (‘94-‘98, 12V)

FUEL PUMPS & FUEL SYSTEM PARTS/ACCESSORIES

WHICH FUEL TRANSFER PUMP WORKS BEST FOR YOUR TRUCK?

LPB-1:  $7.99

FUEL DELIVERY PRODUCTS

‘11-‘18, 2500 & ‘11-‘18, 3500 Fuel Pump Module and Assembly

PUMP-P77037M $298.95

‘07-‘10, 3500 Chassis Cab ‘08-‘10, 4500/5500 Rear Mount Fuel Pump Module Assembly

PUMP-P76869M $348.95

‘07-‘10, 3500 Chassis Cab ‘08-‘10, 4500/5500 Front Mount Fuel Pump Module Assembly

PUMP-P76870M $119.95

‘05-‘09, Electric In-Tank Fuel Pump For long bed trucks with 35 gallon fuel tank. *Not compatible with Cab/Chassis trucks.

PUMP-P76611M $152.95

‘05-‘09, Electric In-Tank Fuel Pump For short bed trucks with 34 gallon fuel tank. *Not compatible with Cab/Chassis trucks.

PUMP-P76148M $132.95

‘03-‘04, Electric Fuel Pump Mounts on the back of the fuel filter cannister.

PUMP-P76110 $135.95

‘98.5-‘04, Electric In-Tank Fuel Pump For trucks with in-tank fuel pump conversion. 34 or 35 gallon fuel tank.

PUMP-P76473M $166.95

‘89-‘93 12V, Mechanical Fuel Pump Diaphragm type. Includes gasket and stud kit.

PUMP-M73060 $39.95

Order 770-886-2500 or genosgarage.com

l 33


FUEL PUMPS & FUEL SYSTEM PARTS/ACCESSORIES

New and Remanufactured Fuel Injectors

Lack of maintenance and poor fuel filtration can shorten injector life. If you have trouble with one, the other five will fail shortly thereafter. The labor for one is the same as the labor for six. The replacement parts decision involves serious money and repair time. We offer these new and reman injectors for ‘89-‘07 trucks. Now you have the best of both, a manufacturer and vendor you can rely on. Not Chassis Cab trucks.

REMAN

‘07.5-‘12, 6.7L BSH-0986435518: $439.95 Not Chassis Cab trucks.

REMAN

‘04.5-‘07, 5.9L BSH-0986435505: $368.00

REMAN

‘03-‘04, 5.9L BSH-0986435503: $368.00

NEW ‘98.5-‘02, 24V-RV (275HP) BSH-0432193635: $85.00 ‘00-‘02, 24V HO (245HP) BSH-0432193581: $102.00

2003 to 2018 injectors have a core charge of $150 each refundable upon return of the core.

NEW

No core charge for19892002 injectors.

NEW

Manual Transmission BSH-0432133844: $104.00

NEW

Automatic Transmission BSH-0432133860: $104.00 and California only.

NEW

Manual Transmission BSH-0432133860: $104.00

NEW

Automatic Transmission BSH-0432133859: $104.00

NEW

with Intercooler BSH-0432133877: $104.00

NEW

without Intercooler BSH-0432133888: $104.00

NEW

#1 4935981: $36.00 #2 4935982: $36.00

‘07.5-‘18 6.7L

#3  4935982: $36.00 #4 4935974: $36.00 #5 4935974: $36.00 #6 4935976: $36.00

‘13-‘18, 6.7L BSH-0986435621: $439.95

REMAN

NEW

Fuel Injector Lines (‘89-‘18)

Supply Line  4935980: $34.95 Injection pump to fuel rail. #1 3957081: $24.00 #2 4988810: $33.95

‘03-‘07 5.9L

#3  4988809: $34.95 #4 5289447 $34.95 #5 4988807: $31.00

‘98.5-‘02, 24V (235HP)

#6 4988806: $38.95

‘98.5-‘02, 24V (235HP)

Supply Line  3957079: $43.95 Injection pump to fuel rail.

Manual Transmission BSH-0432193629: $102.00

Automatic Transmission BSH-0432193630: $108.00

‘96-‘98 (215HP)

#1 3943765: $95.00 #2 3943767: $80.00

‘96-‘98 (180HP)

‘94-‘95 (175HP)

‘98.5-‘02, 5.9L, 24V

#4 3943771 $95.00 #5 3943773: $95.00

‘94-‘95 (160HP)

#6 3943775: $95.00

‘91.5-‘93

#1 3925805: $99.00 #2 3925806: $80.00

‘89-‘91

Your old injector cores are required back. Whatever you do, stay with OEM Reman injectors and “get it right” the first time around rather than going with an aftermarket injector and having to do the job twice. Our website has the full story on injectors (See the “Perfect Collection,” pages 19-31), along with the how-to to save you the labor time (about six hours) should you wish to do the job yourself.

#3  3943769: $95.00

‘94-‘98 5.9L, 12V

#3  3925807: $95.00 #4 3925808: $95.00 #5 3925809: $95.00 #6 3925810: $95.00 Return Line  3926103: $97.95 #1 3920233: $62.95 #2 3920234: $62.95

Crossover Tubes, Injector Seals & Gaskets

‘91.5-‘93 5.9L

‘98.5-‘02

#4 3920236: $62.95 #5 3920237: $62.95 #6 3920238: $62.95

‘03-‘18

CROSSOVER TUBE & INJECTOR SEALS CROSSOVER TUBES WITH O-RING ‘03-‘18, 5.9L & 6.7L  2872395:  $49.95 ‘98.5-‘02, 24V  3936953:  $39.95 CROSSOVER TUBE O-RING ‘03-‘18, 5.9L & 6.7L  4062328:  $1.95 ‘98.5-‘02, 24V  3867043:  $3.00 INJECTOR COPPER SEAL ‘03-‘18, 5.9L & 6.7L  3937142:  $3.15 ‘98.5-‘02, 24V  3906659:  $3.00 INJECTOR O-RING SEAL ‘03-‘18, 5.9L & 6.7L  4890926:  $13.95 ‘98.5-‘02, 24V  3029820:  $3.00

CROSSOVER TUBES WITH O-RING

#3 3920235: $62.95

Return Line  3909696: $89.95

GASKETS & GROMMETS FUEL RETURN LINE GROMMET ‘98.5-‘02, 24V  3905351:  $9.95 ‘89-‘93, 12V  3905391:  $9.95 FUEL SUPPLY LINE GROMMET ‘89-‘93, 12V  3905351A:  $9.95

GASKETS

INJECTOR RETURN BANJO BOLT ‘89-‘98, 12V 4942278:  $3.50

#1 3909438: $49.95 #2 3903486: $49.95

‘89-‘91, 5.9L

#3 3903487: $49.95 #4 3903488: $49.95 #5 3903489: $49.95

Horseshoe shaped gasket. 1 per injector.

#6 3903490: $49.95

Fuel Injector Install Kits for 5.9L and 6.7L Available Online.

Return Line  3909696: $89.95

‘03-‘18, 5.9L & 6.7L F00RJ01831:  $48.95

34 l Ram Turbo Diesel Parts & Accessories  #101

‘98.5-‘02, 5.9L, 24V F00ZR20002:  $22.95

You can find injector tools on page 60.

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


‘98.5-‘99, 24V FFK98599: $128.95 ‘97-‘98, 12V FFK9798: $124.95

Fuel Transfer Pump  Relocation Kits (‘98.5-‘02)

Has your ‘97-‘99 Turbo Diesel developed a leak at either the top of the fuel filter housing or at the O-ring area of the fuel heater due to years of use and material fatigue?

STANDARD KIT (3/8” DIA. FUEL HOSE) VULCANRELOKIT:  $74.95 ‘BIG LINE’ KIT (1/2” DIA. FUEL HOSE) VULCAN_VPPS9802-KIT:  $110.95

This kit enables owners of ‘98.5-‘02 trucks to relocate the engine’s problematic fuel transfer pump. The kit consists of a bracket; 3/8” diameter B-20 bio-diesel compatible fuel hose rated at 50 psi; electrical extension; and custom fittings. The benefits of relocation: the transfer pump is not subjected to continual engine vibration; the transfer pump is closer to the fuel tank and operates more like a pusher pump; and should the pump fail, the pump is now very easy to access. The optional ‘Big Line’ Kit with 1/2” fuel line is a high-performance version of the Standard Kit designed for use in high horsepower trucks. Detailed instructions are included which show you how to move the fuel transfer pump from the engine to the frame rail. NOTE: Fuel transfer pump is not included in Relocation Kit. Airtex brand fuel pumps available at your local parts store will work with these fuel transfer pump relocation kits. The Airtex fuel pump mounts horizontally rather than vertically like the OEM fuel pump. (see photo.) To mount the pump, simply flip the bracket so that the short tab is mounted to the frame.

Have you tried to source a replacement kit from Chrysler or Cummins only to find it is no longer available or ridiculously priced? Here is a cost-effective solution: use a replacement filter head and corresponding filter/water separator from the ‘94 to ‘96 vintage truck. The Fuel Filter Kit includes: Billet aluminum filter head • 3831852 water-in-fuel sensor • 4 banjo fitting gaskets • FS1253 fuel filter for ‘97-98, 12V and FS19519 for ‘98.5-99, 24V To make the water-in-fuel sensor operative you simply cut and splice into the existing wire leads to the sensor. •

NOTE: This kit does not have provisions for the fuel heater unit on ‘98.5-‘99 trucks, see kit GG-FC98599.

If the fuel heater unit on your ‘98.5-‘99 truck is leaking, we have a Fuel Heater Block Off that solves the problem. See page 36.

Fuel Filter CANISTER Kit (‘98.5-‘99) ‘98.5-‘99, 24V GG-FC98599: $179.95  V

Has your ‘98.5-‘99 Dodge Diesel developed a leak at the top of the fuel filter housing or at the O-ring area of the fuel heater due to years of use and material fatigue?

THROTTLE CABLE AND LINKAGE REPAIR Kit (‘94-’98, 12v)

Have you tried to source a replacement kit from Chrysler or Cummins only to find it is no longer available or ridiculously priced?

GG-TLK9498:  $69.95

This kit contains most of the parts you’ll need to repair your truck’s throttle linkage.

The Fuel Filter Kit includes: • Replacement Fuel Filter Canister • Fuel Heater Connector • FS19855 Filter Installed • Hose Clamps

 THROTTLE LINKAGE ROD Kits ‘94-‘98 3932317:  $69.95

Banjo Bolt Gaskets Gates Fuel Hose • WIFS Connector • •

‘94-‘98

BILLET ALUMINUM FUEL FILTER HEAD KIT (‘94-’96)

FUEL PUMPS & FUEL SYSTEM PARTS/ACCESSORIES

Fuel Filter Kit (‘97-‘99)

GG-3925600KIT:  $89.95

‘91-‘93

(Threaded rod measures 4-7/8”)

‘94-‘96 Dodge Cummins fuel filter heads are no longer available from Chrysler so we sourced our own. Made from billet aluminum, this filter head is a direct bolt-on replacement of the OEM part.

‘91-‘93

4089077:  $48.95 ‘89-‘91

(Threaded rod measures 4-1/4”)

‘89-‘91

It can also be used on other applications.

4089076:  $54.95

The Fuel Filter Head Kit includes:

Replace a worn throttle linkage with either of these new kits from Cummins and restore proper throttle function.

Replacement Filter Head  • (4) Banjo Bolts & Gaskets  • Filter Nipple If you would like to upgrade banjo bolts or add fuel pressure, see the fittings on page 37. •

Please compare to your original throttle linkage rod before ordering.

BILLET ALUMINUM

 THROTTLE RETURN SPRINGS (‘94-’98, 12V) HEAVY SPRING TWO CLIPPED ENDS 3933130:  $31.95

FUEL CANISTER CAP

‘10-‘18 LT-67FUELCAP:  $80.95

 THROTTLE ROD endS (‘91-’98, 12V)

LIGHT SPRING TWO CLIPPED ENDS 3931510:  $18.95

RIGHT HAND THREAD 3990093:  $11.95

STD. SPRING - CLIPPED/ METAL HOOK ENDS 3925377:  $9.95

LEFT HAND THREAD 3990094:  $9.95

STD. SPRING METAL HOOK ENDS 3923058:  $7.95

OEM throttle rod ends have short threads.

Catalog good through October 2018 l Prices subject to change without notice.

Is your plastic fuel filter canister cap showing the signs of aging? You know, the rounded-off shoulders of the 28mm hex head. We’ve also seen the caps over-torqued and cracked. Here is a stylish and functional solution. A billet aluminum fuel cap that fits the 2010-newer Ram 6.7-liter Cummins Diesel engines.

FUEL FILTER CAP WITH FUEL PRESSURE TEST PORT ‘00-‘07, 5.9L LT-59FUELCAP:  $69.50

Black anodized billet aluminum with 1/8” pressure port and a 3/4” hex head for easy removal.

Order 770-886-2500 or genosgarage.com

l 35


FUEL PUMPS & FUEL SYSTEM PARTS/ACCESSORIES

FUEL SYSTEM ACCESSORIES Fuel Pressure Test Kit (‘98.5-‘02, 5.9L)  This kit is a 2-1/2” liquid filled 0-30 psi gauge in a stainless steel housing with a built in snubber, Weatherhead 250 psi hose, brass push-lock fittings and brass schraeder valve actuator for ‘00-‘02 trucks (with rubber seal and knurled thumb screw). Ships with 1/8 NPT fitting for use with ‘98.5-‘99 trucks. NOTE: Purchase the FPADPT-KIT to allow you to check the fuel pressure on all ‘89-‘97, 12V and ‘03-‘07, 24V trucks.

VULCAN_TEST_KIT:  $58.00

VULCAN Draw Straw I (‘94-‘04)  The CNC machined billet Draw Straw I features dual ports which allows the user to install a regulated return fuel system without drilling the top of the module or cutting the filler neck tube for a second return line. This makes for a clean and secure installation. Works with 3/8” and 1/2” fuel line. NOTE: Will not work on trucks equipped with and in-tank pump.

VULCAN-DS1:  $75.00

VULCAN Draw Straw II (‘98.5-‘17)  The Draw Straw II allows trucks with in-tank fuel pumps to use an external pump. Some drilling is required to fit in the fuel tank. Works with 3/8” fuel line.

VULCAN-DS2:  $31.99

VULCAN Draw Straw V (‘98.5-‘17)  The Draw Straw V HiFlow allows for greater fuel volume by using 1/2” plumbing. The DSV installs inside the tank module in place of the factory pump on fuel systems/tanks in ‘05-‘09 trucks. You can use the original OEM supply connection as the FASS return line putting more fuel back into the module for low fuel level situations. No tank drilling! A simple 5/8” inch hole in the module is all that’s required to insert the DSV HF fitting. Works with 3/8” fuel line.

VULCAN-DS5:  $67.99

VULCAN Filter to Injection Pump Hose Kit (‘98.5-‘07, 5.9L) This hose connects the fuel filter outlet to the injection pump. It is great for those with a FASS HPFP or other systems who want to completely eliminate the restrictions in the fuel supply circuit.

VULCAN-VP02:  $40.00

VULCAN Universal Fit Fuel Pressure Line (‘98.5-‘02) This hose is 1/4” diameter (inside diameter), 30” in length, and is rated for 100 psi. The assortment of fittings for each end of the hose allow you to add a fuel pressure sending unit to the fuel system. Purchase a tapped banjo bolt to use this

VULCAN-FH:  $23.00

fuel pressure line on other year trucks.

Adjustable Fuel Pressure Gauge Needle Valve/Snubber Kit (‘89-‘07, 5.9L)  This kit works with the VULCAN Univer-

sal Fit Fuel Pressure Line (VULCAN-FH).

GG-FPSNUB-KIT: $26.95

VULCAN Push Lock Banjo Connector - M12  M12 x 3/8 push lock barb.

VULCAN-B1206:  $7.49

VULCAN Push Lock Banjo Connector - M14  M14 x 3/8 push lock barb.

VULCAN-B1406:  $7.49

Fuel Pressure Test Adapter (‘89-‘07, 5.9L)  The Fuel Pressure Test Adapter allows for a quick and easy fuel pressure check on all Ram trucks with the Cummins Turbo Diesel engine. Testing the fuel pressure is a must when diagnosing fuel delivery problems. Kit includes: banjo fitting, gaskets, and Schraedar valve with cap.

FPADPT-KIT:  $19.95 5/16” DIAMETER

GATES Barricade® Fuel Line Heavy Duty replacement fuel hose. Will work with Diesel, Bio-Diesel, gas and other fuel types. We also offer 5/16” diameter fuel hose to repair/replace the problematic fuel return hose used on ‘94-‘98, 12-valve engines.

GATES-27324:  $2.00/ft. 3/8” DIAMETER

GATES-27325:  $2.00/ft. 1/2” DIAMETER

GATES-27326:  $225/ft. CUMMINS Banjo Snubber 14MM x 1.5 thread (‘94-‘98)  Designed specifically for Cummins 5.9L diesel engines and dampens the pressure spikes of the lift pump. The snubber takes the place of a 14mm banjo bolt and makes fuel pressure gauge installation easy. (Gaskets included.)

CUMMINS Banjo Snubber 12MM x 1.5 thread (‘89-‘93 & ‘98.5-‘07, 5.9L)  Dampens the pressure spikes of the Cummins lift pump. The snubber takes the place of a 12mm banjo bolt and makes fuel pressure gauge installation easy. (Gaskets included.) 1/8 NPT RLT Snubber  It is highly recommend that you use this snubber on trucks with the VP-44 injection pump to dampen the fuel pulsations (hydraulic hammering) created by the injection pump. Individual Tapped (M12) Banjo Fittings (‘89-‘93 & ‘98.5-‘07, 5.9L)  These Banjo Fittings feature a large diameter (.187” vs. .130”) fuel port. The fittings are SAE (3/4” hex) vs. the stock 17mm hex design. The fitting on the left is the standard fitting, while the fitting on right has a built-up hex that is drilled to accept a 1/8 NPT male threaded fuel pressure sensor. (Requires 2 replacement gaskets) Vulcan Performance Jacobs Brake Fuel Line Adapter  This 1/2” 12MM adapter is designed for use with trucks equipped with a Jacobs Brake. When fitting a fuel line to the injection pump there is a clearance issue. Allows for pump clearance without using a restrictive banjo fitting.

‘94-‘98 BF-CBS010: $23.49 14MM CUMMINS GASKET

BF-3963988: $3.95 each ‘89-‘93 & ‘98.5-‘09, 5.9L BF-BBS010: $22.95 12MM CUMMINS GASKET

BF-3963983: $2.25 each RLT-SNUBBER: $8.00 BF-LONG-TAPPED: $7.00 BF-LONG-UNTAPPED: $4.50 12MM CUMMINS GASKET

BF-3963983: $2.25 each VULCAN_PBF: $13.99

Fuel Pressure Tee  Inline fuel pressure tee available in either 1/2”, 3/8” or 5/16” diameter barbed fittings with 1/8 NPT threaded fitting. Works well with aftermarket FASS fuel systems.

1/2” DIA. FPT_1/2: $12.50 3/8” DIA. FPT_3/8: $12.50 5/16” DIA. FPT_5/16: $12.50

Fuel Heater Block-Off (‘98.5-‘99)  The fuel heater block-off allows you to remove the leaky fuel heater from the discontinued fuel filter top. Includes 2 Viton o-rings.

GG-FHBO: $16.95

Fuel Heater Block-Off (‘98.5-‘99)  The fuel heater block-off allows you to remove the leaky fuel heater from the discontinued fuel filter top.

FHB09899: $55.00  V

36 l Ram Turbo Diesel Parts & Accessories  #101

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


1994-2002 SECOND GENERATION

CUMMINS Fuel System Bleed Screw and Captive Washer (‘89-‘98, 12V)

3939570

CUMMINS Return Check Valve (‘89-‘98, 12V) (Requires 2 #3918188 washers.)

3924726

CUMMINS Fuel Heater Seal (‘89-‘93)

CUMMINS Fuel Pre-Heater Delete Nipple (‘89-‘93)

AFTERMARKET Fuel Shut-Off Solenoid (‘89-‘93)

$6.95

$10.95

FS15 $19.95

MOPAR Fuel Module Tank Seal (‘90-‘06) Works with OEM fuel modules.

52018808 $14.95

1994-2002 SECOND GENERATION

04897669AB $82.95

* NOTE: A lot of early trucks have had the fuel level sending units replaced or updated in the past. We recommend removing the module and confirming which sending unit is installed before ordering. MOPAR Fuel Module Tank Seal (‘90-‘06) Works with OEM fuel modules.

52018808 $14.95

‘98-‘02, MOPAR Fuel Tank Module and Sending Unit For trucks with no fuel pump. Includes tank seal.

4897668AF $439.95

3918188 $3.95

P7100 to Gearhousing O-ring (‘94-‘98, 12V)

NEW! 3969698 9.95

FLEETGUARD Wiring Harness and Thermostat for Fuel Heater/Pre-filter (‘94-‘98, 12V)

3843722S $58.95

MOPAR Fuel Pre-Heater & Lift Pump – Fuel Elbow Hose  (‘94-‘98, 12V)

MOP-04746638 $32.95

MOPAR Lift Pump Spacer  (‘94-‘98, 12V) Used when removing fuel heater. (2) 3939258 gaskets required. See page 6.

3914284 $14.95

CUMMINS Fuel Pre-Heater/Strainer Assembly (‘94-‘98, 12V) (2) 3939258 gaskets required. See page 6.

3847102S $219.95

FLEETGUARD Fuel Heater Thermostat (‘00-‘07, 5.9L)

3900349S $14.95

AFTERMARKET Lift Pump Primer Button Boot (‘94-‘98)

DORMAN Fuel Filter Cap (‘00-‘07, 5.9L) ‘96-‘97, Fuel Tank Module and Sending Unit For trucks with a 34 or 35 gallon fuel tank. Includes tank seal.

GG-FHORING $1.00

8MM Sealing Washer (‘94-‘98, 5.9L)  For fuel filter bleed screw and fuel injector return lines. V

3925954 $19.95

3831852-S $29.95

Will not work on trucks with “in tank” fuel pump conversions.

o-ring is an upgrade from an OEM part and will provide a longer lasting seal. V

3913695 $5.50

CUMMINS Water-in-Fuel Sensor (‘89-‘96)

MOPAR Fuel Level Sending Unit  (‘00-‘02) 2500/3500

Fuel Filter Heater O-Ring (‘98.5-‘99)  This Viton

FUEL PUMPS & FUEL SYSTEM PARTS/ACCESSORIES

1989-1993 FIRST GENERATION

LPB-1 $7.99

DRM904301 $14.95

P74699R $182.95

FLEETGUARD Fuel Heater (‘00-‘07, 5.9L)

3959448S $40.95

FLEETGUARD Service Kit for Fuel Heater/Prefilter (‘94-‘98, 12V) Service kit includes strainer screen, locknut, and gasket.

3845400S $8.95

FLEETGUARD Heater Element for Fuel Heater/Prefilter  (‘94-‘98, 12V) Upper gasket included.

3907766S $40.95

CUMMINS Fuel Pre-Heater Upper Gasket (‘94-‘98, 12V)

3834185S $2.25

Catalog good through October 2018 l Prices subject to change without notice.

FLEETGUARD Fuel Canister Drain (‘00-‘02)

3959453S $13.95

AFTERMARKET Fuel Filter Canister Drain Valve (‘97-‘99)

GG-9799DV $53.95

CUMMINS Fuel System Bleed Screw and Captive Washer (‘89-‘98, 12V)

3939570

CUMMINS Return Check Valve (‘89-‘98, 12V) (Requires 2 #3918188 washers.)

3924726

$6.95

$10.95

Order 770-886-2500 or genosgarage.com

l 37


FUEL PUMPS & FUEL SYSTEM PARTS/ACCESSORIES

1994-2002 SECOND GENERATION BOSCH VP44 Fuel Overflow Valve Kit (‘98.5-‘02, 24V) This kit comes complete with the fuel overflow valve and two sealing washers.

2003-2009 THIRD GENERATION 1467445003 $29.95

BOSCH Fuel Overflow Valve Kit (‘94-‘98, 12V) This kit comes complete with the fuel overflow valve and two sealing washers.

2-417-413-101 $82.95

AFTERMARKET Water-in-Fuel Sensor Viton O-ring (‘97-‘99, 5.9L) This viton o-ring provides a superior seal compared to a standard rubber o-ring.

GG-OR9799WS $.75

FLEETGUARD Water-in-Fuel Sensor (‘00-‘07, 5.9L) 10mm thread.

3959454S $8.95

FLEETGUARD Water-in-Fuel Sensor (‘89-‘96, 12V)

3831852-S $29.95

BD LED Low Fuel Pressure Indicator (‘98.5-‘07, 5.9L) Indicator lights up when fuel pressure descreases to 5 psi. Tapped banjo bolt and gaskets included.

BD-1081130 $74.00

BOSCH Fuel Injection Rail (‘07.5-‘12, 6.7L) Comes complete with rail pressure sensor and fuel pressure limiting valve.

CUMMINS Fuel Injection Rail (‘07.5-‘12, 6.7L) Comes complete with rail pressure sensor and fuel pressure limiting valve.

BOSCH Fuel Injection Rail (‘03-‘07, 5.9L) Comes complete with rail pressure sensor and fuel pressure limiting valve.

CUMMINS Fuel Injection Rail (‘03-‘07, 5.9L) Comes complete with rail pressure sensor and fuel pressure limiting valve.

BOSCH Rail Pressure Relief Valve (‘07.5-‘18, 6.7L)

CUMMINS Rail Pressure Relief Valve (‘07.5-‘18, 6.7L)

BOSCH Rail Pressure Relief Valve (‘03-‘07, 5.9L) Fuel Shutoff Solenoid, Bracket & Relay (‘94-‘98) The P7100 pump on the ‘94-‘98 Dodge/Cummins 12-valve engine utilizes a 12-volt electric solenoid that, over time, may stop functioning.

SA-4981-12 $85.95 CUMMINS Rail Pressure Relief Valve (‘03-‘07, 5.9L)

SPECIAL: Mounting Bracket and Fuel Shutoff Relay included.

Fuel Solenoid Replacement Boot (‘94-‘98) Replace a torn boot on the fuel shutoff solenoid and help prevent damage to it.

SA-4153 $9.95

AFTERMARKET Fuel Shutoff Relay (‘94-‘98) This 70 amp relay activates the fuel solenoid.

SS70A $13.95

AFTERMARKET Fuel Solenoid Saver Diode (‘94-‘98)  Save the fuel solenoid from burning up if the starter sticks on.

SS99 $24.50

BOSCH Rail Pressure Sensor  (‘07.5-‘12, 6.7L)

CUMMINS Rail Pressure Sensor  (‘07.5-‘12, 6.7L)

BOSCH Rail Pressure Sensor (‘03-‘07, 5.9L)

CUMMINS Rail Pressure Sensor (‘03-‘07, 5.9L) AFTERMARKET 65 amp Fusible Link (‘94-‘98)  Protection for the power supply to the fuel shutoff solenoid.

MOPAR Rail Pressure Sensor Connector Repair Kit (‘03-‘07, 5.9L)

BD-1081130 $74.00

FLEETGUARD Fuel Heater (‘00-‘07, 5.9L)

3959448S $40.95

FLEETGUARD Fuel Heater Thermostat (‘00-‘07, 5.9L)

3900349S $14.95

38 l Ram Turbo Diesel Parts & Accessories  #101

4937282 $379.00

BSH-0445226014 $259.95

4929618 $380.00

BSH-F00R000632 $130.00

4938005 $285.00

BSH-1110010029 $125.00

3947799 $279.95

BSH-0281006327 $124.95

5297640 $210.00

BSH-0281006325 $79.95

3949988 $228.00

FL90 $13.85

2003-2009 THIRD GENERATION BD LED Low Fuel Pressure Indicator (‘98.5-‘07, 5.9L) Indicator lights up when fuel pressure descreases to 5 psi. Tapped banjo bolt and gaskets included.

BSH-0445226044 $325.00

NEW! 5143781AB $33.95

CUMMINS Fuel Injector Harness to Valve Cover Harness (‘06 & ‘18, 5.9L & 6.7L)

4918587 $20.45

CUMMINS Fuel Injector Harness Retaining Clips (‘03-‘05, 5.9L) Sold individually. (6 required per engine.)

3963736 $2.50

CUMMINS Replacement Fuel Injection Harness with Plug (‘03-‘05, 5.9L) Attaches to rocker housing. (3) required per engine. Sold individually.

3966805 $51.95

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


I

I

2010-2018 FOURTH GENERATION

CUMMINS Fuel Injector Return Check Valve (‘03-‘07, 5.9L) Requires: (1) #3963988 14MM gasket - $3.95 ea. (1) #3963983 12MM gasket - $2.25 ea.

3957290 $12.95

BOSCH Rail Pressure Sensor  (‘13-‘18, 6.7L)

CUMMINS Fuel Control Actuator (‘07.5-‘18, 6.7L) Replacement mounting hardware included.

4936097 $124.95

CUMMINS Rail Pressure Sensor  (‘13-‘18, 6.7L)

4306993 $131.95

CUMMINS Fuel Control Actuator (‘03-‘07, 5.9L) Replacement mounting hardware included.

4932457 $114.95

BOSCH Rail Pressure Sensor  (‘07.5-‘12, 6.7L)

BSH-0281006327 $124.95

CUMMINS Water-in-Fuel Sensor (‘07.5-‘18, 6.7L)

3911940S $12.95

CUMMINS Rail Pressure Sensor  (‘07.5-‘12, 6.7L)

5297640 $210.00

FLEETGUARD Water-in-Fuel Sensor (‘00-‘07, 5.9L) 10mm thread.

3959454S $8.95

CUMMINS Fuel Injector Harness to Valve Cover Harness (‘06 & ‘18, 5.9L & 6.7L)

4918587 $20.45

FLEETGUARD Water-in-Fuel Sensor (‘04.5-‘07, 5.9L) 14mm thread.

3953517S $11.95

MOPAR Fuel Canister Drain  (‘10-‘18, 6.7L)

68065611AA $19.95

CUMMINS Fuel Control Actuator Repair Harness (‘03-‘18, 5.9L & 6.7L)

3164098 $39.95

MOPAR Fuel Filter Cap  (‘10-‘18, 6.7L) *Want something a little more robust than this tool made of plastic? See page 35 for the Billet Aluminum cap.

68065612AA $69.95

BOSCH Fuel Rail Pressure Relief Valve (‘07.5-‘18, 6.7L)

F-OON-200-798 $37.63

BOSCH Cascade Overflow Valve  (‘03-‘07, 5.9L)

MOPAR Fuel Canister Drain  (‘03-‘07, 5.9L)

5080552AB $27.95

DORMAN Fuel Filter Canister Top and Gasket  (‘00-‘07, 5.9L)

DRM904301 $14.95

I

BSH-F00RL01029 $225.00

STEERING, SUSPENSION & BRAKES

2003-2009 THIRD GENERATION

BSH-1110010013 $130.00

CUMMINS Fuel Rail Pressure Relief Valve  (‘07.5-‘18, 6.7L)

4938005 $285.00

CUMMINS Fuel Control Actuator (‘07.5-‘18, 6.7L) Replacement mounting hardware included.

4936097 $124.95

CUMMINS Fuel Control Actuator Repair Harness (‘03-‘18, 5.9L & 6.7L)

3164098 $34.95

CUMMINS Water-in-Fuel Sensor (‘07.5-‘18, 6.7L)

3911940S $12.95

2010-2018 FOURTH GENERATION BOSCH Fuel Injection Rail (‘13-‘18, 6.7L) Comes complete with rail pressure sensor and fuel pressure limiting valve.

CUMMINS Fuel Injection Rail (‘13-‘18, 6.7L) Comes complete with rail pressure sensor and fuel pressure limiting valve.

BOSCH Fuel Injection Rail (‘07.5-‘12, 6.7L) Comes complete with rail pressure sensor and fuel pressure limiting valve.

CUMMINS Fuel Injection Rail (‘07.5-‘12, 6.7L) Comes complete with rail pressure sensor and fuel pressure limiting valve.

BSH-0445226126 $325.00

5295117 $450.00

MOPAR Water-in-Fuel Sensor  (‘13-‘18, 6.7L) Replacement for chassis-mounted fuel filters. BSH-0445226044 $325.00

68197868AA $32.95

2014-2018 RAM 1500 ECODIESEL

4937282 $369.00

Catalog good through October 2018 l Prices subject to change without notice.

MOPAR Fuel Filter Canister

68394482AA $34.95

Order 770-886-2500 or genosgarage.com

l 39


STEERING, SUSPENSION & BRAKES

LEARN MORE: TYPES OF BRAKE PADS genosgarage.com/downloads/TechPDF/ TDR51_BrakePadSpottersGuide.pdf H TDR43, p14-17

Power Brake Bleeder Kits & Accessories

Brake Pads Our local Dodge dealer introduced the MOPAR brake pads to us, and we believe they are a great value. If you are happy with the OEM brake pads on your truck, you will be happy with these. FRONT DISC BRAKE PADS

Brake Bleeder Kit (Rectangular/Oblong Reservoir Cap)

Brake Bleeder Kit (Round 3-tab Twist Reservoir Cap)

Kit includes: 2qt capacity tank and tubing for bleeder valve.

Kit includes: 2qt capacity tank, metal rectangular adapter plate, machined billet aluminum adapter cap and clamping hardware.

MP-0113:  $67.46

MP-0105:  $67.46

(‘09-‘17) 2500/3500 BRAKE-2AMV1148AA:  $65.95 (‘09-‘16) 1500 BRAKE-2AMV1350AB:  $68.95 (‘08-‘18) 4500/5500 BRAKE-68034093AA:  $145.00 (‘03-‘08) 2500/3500 BRAKE-2AMV1267AA:  $66.95 (‘00-‘02) 2500/3500 BRAKE-2AMV1254AA:  $69.95

EXTRA ADAPTERS Metal Rectangular Adapter Plate

Aluminum Adapter

For older style rectangular reservoir. Includes clamping hardware.

Round aluminum adapter for Chrysler Ram trucks.

MP-1105:  $34.16

MP-1113:  $34.16

(‘97-‘99) 2500 4WD - 7500LB AXLE BRAKE-V1012364AB:  $68.95 (‘97-‘99) 2500 4WD - 8800LB AXLE BRAKE-V1016279AB:  $66.95 (‘94-‘99) 2500 2WD BRAKE-V1012364AB:  $68.95 (‘94-‘99) 3500 2WD/4WD BRAKE-V1016279AB:  $66.95 (‘94-‘96) 2500 4WD - 3500LB AXLE BRAKE-V1012364AB:  $68.95 (‘94-‘96) 2500 4WD - 4500LB AXLE BRAKE-V1016279AB:  $66.95 (‘89-‘93) 2500/3500 BRAKE-V1011777AB:  $66.95

REAR DISC BRAKE PADS

ACCESSORIES

(‘09-‘16) 2500/3500 BRAKE-2AMV2158AB:  $79.95 (‘01.5-‘08) 2500/3500 BRAKE-2AMV2257AA:  $66.95

16oz. Catch Bottle

(‘09-‘16) 1500 BRAKE-2AMV2563AA:  $65.95

Kit includes: 16oz. catch bottle with tubing to attach to bleeder valves.

MP-1810:  $12.56

DOT 5.1 Hi-Performance Brake Fluid MOTUL_5.1 (500 ml/17 oz.):  $12.25

DOT 5.1 fluid provides a high boiling point and relatively stable viscosity over a wide range of temperatures. It is also compatible with DOT 3 or 4 fluid and can be mixed without concern. We recommend two bottles to fill your truck’s brake system.

DORMAN ABS Brake Sensor - Front (‘06-‘08)

DRM970052 $28.95

DORMAN ABS Brake Sensor - Front (‘03-‘05)

DRM970088 $39.95

DORMAN ABS Brake Sensor - Front (‘00-‘02)

NEW! DRM695882 $40.95

DORMAN ABS Brake Sensor - Rear (‘98-‘05)

DRM970024 $17.95

DORMAN ABS Brake Sensor - Rear (‘89-‘97)

DRM970012 $12.95

40 l Ram Turbo Diesel Parts & Accessories  #101

Brake Pads SUPER-DUTY (‘14-‘17) 2500/3500 FRONT BRAKE-HB633790P: $119.00 REAR BRAKE-HB634750P: $119.00

(‘97-‘99) 2500 4WD FRONT (7500lb axle) BRAKE-HB296670P: $81.00 FRONT (8800lb axle) BRAKE-HB298787P: $81.00

(‘09-‘13) 2500/3500 FRONT BRAKE-HB633790P: $119.00 REAR BRAKE-HB634750P: $119.00

(‘94-‘99) 2500/3500 FRONT (2500 2WD) BRAKE-HB296670P: $81.00 FRONT (3500 2WD/4WD) BRAKE-HB298787P: $81.00

(‘03-‘08) 2500/3500 FRONT BRAKE-HB552722P: $86.00 REAR BRAKE-HB299650P: $98.00

(‘94-‘96) 2500 4WD FRONT (3500lb axle) BRAKE-HB296670P: $81.00 FRONT (4500lb axle) BRAKE-HB298787P: $81.00

(‘01.5-‘02) 2500/3500 REAR BRAKE-HB299650P: $98.00 HEAVY-DUTY (‘00-‘02) 2500/3500 FRONT HB-487.733F: $83.95

Brake pad compounds are a compromise. If you choose the HAWK Super-Duty pad (suffix “P”) you can expect a higher operating temperature and less fade than stock brake pads. They will also have a higher initial “bite” than the stock pad. The trade-off: moderate dust and moderate noise as compared to the stock pad which is low dust and low noise. Hawk advises that Super-Duty brake pad wear is comparable to the street brake pad. *The HB-487.733F brake pad listed for the ‘00-‘02 trucks is only available in “F” compound which is Hawk’s designation for Street. This compound is much like a stock Mopar pad.

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


B6 B8 B8 5100 Series

(For STOCK RIDE HEIGHT.)

(For STOCK RIDE HEIGHT up to 2.25” lift.)

If you’re looking for suspension performance, the B6 4600 Series shock absorber is the best solution to improve your truck’s ride.

BILSTEIN B8 5100 series are designed specifically to help your lifted Dodge Ram truck, supplying the correct tuning and length for your specific lift. • Monotube gas pressure technology • Easy to install; direct bolt-on; no modification required • Multi-layer zinc finish is the most durable in the industry • Limited Lifetime Warranty

Monotube gas pressure construction • Improved ride and handling Added traction and enhanced stability Increased performance when hauling or towing. Limited Lifetime Warranty

‘14-‘18, 2500 2WD: $72.95 each FRONT BIL-24-269421 REAR  BIL-24-269439 ‘13-‘18, 3500 4WD: $84.95 each

‘13-‘18, 3500 4WD

(Excludes air leveling suspension - rear only.)

FRONT (2”-2.25” lift) BIL-24-251747: $89.95 each REAR (0-1” lift)  BIL-33-238555: $89.95 each

FRONT BIL-24-238526 REAR  BIL-24-238533

(Excludes air leveling suspension - rear only.)

‘14-‘18, 2500 4WD

‘13-‘18, 2500 4WD

(Excludes air leveling suspension - rear only.)

‘14-‘18, FRONT (2”-2.25” lift) BIL-24-251754: $89.95 each ‘14-‘18, REAR (0-1” lift)  BIL-24-239455: $89.95 each

FRONT BIL-24-240390: $84.95 each REAR  BIL-24-239462: $80.95 each

(Excludes air leveling suspension - rear only.)

‘13, 2500 4WD:  $79.95 each One Piece Aluminum Rod Guide & Seal Keeps dirt out and maintains a nearly friction-free surface for longer life.

FRONT BIL-24-186070 REAR  BIL-24-186094

‘03-‘12, 2500/3500 2WD:  $79.95 each FRONT  BIL-24-186063 REAR  BIL-24-186087

‘94-‘02, 2500/3500 4WD:  $72.95 each Massive Self-Adjusting Digressive Piston Instantly reacts and adjusts for any condition...smooth road, rough road or no road. Provides maximum vehicle body motion control while maintaining superior comfort.

FRONT  BIL-24-185172 REAR  BIL-24-188036

‘94-‘02, 2500/3500 2WD:  $72.95 each FRONT  BIL-24-184847 REAR  BIL-24-184854

‘89-‘93, W250/W350 4WD:  $79.95 each FRONT  BIL-33-248097

High Pressure Nitrogen Gas & “Floating” Dividing Piston Eliminates the possibility of oil foaming and performance loss.

‘13, FRONT (0-2.25” lift)  BIL-24-185776: $81.95 each ‘13, REAR (0-2” lift)  BIL-24-191203: $81.95 each

FRONT BIL-24-186070 REAR  BIL-24-186094

‘03-‘12, 2500/3500 4WD:  $79.95 each

STEERING, SUSPENSION & BRAKES

B6 4600 Series

Massive Self-Adjusting Digressive Piston Instantly reacts and adjusts for any condition... smooth road, rough road or no road. Provides maximum vehicle body motion control while maintaining superior comfort.

High Pressure Nitrogen Gas and “Floating” Dividing Piston Eliminates the possibility of oil foaming and performance loss.

‘89-‘93, W250/W350 4WD:  $79.95 each

‘03-‘12, 2500/3500 4WD

FRONT (0-2.25” lift)  BIL-24-185776: $81.95 each REAR (0-2” lift)  BIL-24-191203: $81.95 each

‘94-‘02, 2500/3500 4WD

FRONT (0-2.25” lift)  BIL-24-185776: $81.95 each REAR (0-1” lift)  BIL-24-185783: $81.95 each REAR (0-2” lift)  BIL-24-191203: $81.95 each

‘89-‘93, 2500/3500 4WD

FRONT  BIL-33-185590: $81.95 each REAR  BIL-33-185569: $81.95 each

RAM 1500 EcoDiesel B8 5100 Series (For STOCK RIDE HEIGHT up to 2.75” lift.)

REAR  BIL-24-248105

‘09-‘17, 1500 4WD

‘89-‘93, D250/D350 2WD:  $72.95 each

RIDE HEIGHT ADJUSTABLE  (Excludes air leveling suspension.)

FRONT  BIL-24-185165

FRONT (0-2.75” lift)  BIL-24-187367: $105.95 each REAR  (0-1” lift)  BIL-24-187374: $84.95 each

‘89-‘93, D250/D350 2WD:  $79.95 each REAR  BIL-24-185158

“What is the difference between the 4600 Series and 5100 Series shocks?” The answer: other than the color, the 5100 Series shocks are for trucks that have up to a 2” lifted suspension and feature stiffer valving. Contrary to folklore, they are not designed for a specific Ram application.

B6 4600 Series RAM 1500 EcoDiesel

‘14-‘18, RAM 2500 4X4 POWER HOP KIT

(For STOCK RIDE HEIGHT.)

Monotube gas pressure technology • Easy to install; direct bolt-on; no modification required • Improved control and stability, precise handling, ultimate performance, and incredible comfort • BILSTEIN’s unique piston design offers greater sensitivity and superior vehicle control • Limited Lifetime Warranty

GG-PHOPKIT:  $250.00

This kit dampens axle harmonics under power and allows for extra load carrying capacity. Fits 2500 4x4 trucks only. Kit includes: H TDR 98, pg. 7

• Bilstein Damper • Axle Mounting Bracket • Mounting Hardware

‘09-‘17, 1500 4WD

(Excludes air leveling suspension.)

FRONT BIL-24-187343: $96.95 each REAR  BIL-24-187350: $73.95 each

‘09-‘17, 1500 2WD

(Excludes air leveling suspension.)

FRONT BIL-24-187480: $84.95 each REAR  BIL-24-187510: $73.95 each

Catalog good through October 2018 l Prices subject to change without notice.

NOTE: Will not work on Power Wagon. Please make sure you have the 4 mounting holes on the top of the differential.

Order 770-886-2500 or genosgarage.com

l 41


STEERING, SUSPENSION & BRAKES

HOW TO CORRECT YOUR TRUCK’S STEERING WOES

Download the ‘TDR Buyer’s Guide’ in the Technical Information section of our website for more details. Sway Bar END Links FRONT - STANDARD HEIGHT TRUCKS ‘13-‘18, 3500 4WD & ‘14-‘18, 2500 SMX-1315: $116.23 (Newer style chassis.) ‘06-‘18, 1500 4WD (non-Mega Cab) SMX-1300: $125.55 ‘03-‘12, 2500/3500 2WD w/IFS SMX-1229: $125.55 ‘11-‘12, 2500/3500 4WD & ‘13, 2500 SMX-1311: $85.05 ‘06-‘10, 4WD including 1500 Mega Cab SMX-1227: $85.05 ‘03-‘05, 4WD SMX-1226: $80.55 ‘00-‘02, 4WD Manufacturer SMX-1225: $85.05 lifetime warranty on the steel April ‘95-‘99, 4WD axle pin. SMX-1224: $85.05 ‘94-March ‘95, 4WD SMX-1222: $85.05

Sway Bar End Links sold as a pair.

Front Sway Bar End Links (‘00-‘09 2500/3500) BD-1032050: $129.00

Due to the heavy demands put on the ‘00-‘09 Dodge Ram 4WD 2500/3500 pick-ups, the front sway bar end links are prone to wearing or even breaking when the truck is lifted due to the stress of the axle dropping. BD’s Sway Bar End Links have a Dual Pivot Design that allows for greater amount of articulation and less stress. Long life urethane bushing design allows for greater flex without breaking and won’t seize due to the elements. NOTE: Designed for use on trucks with stock or up to a 3” lift.

FRONT - TRUCKS WITH LIFT KITS (up to 3” lift) ‘13-‘18, 3500 4WD & ‘14-‘18, 2500 4WD SMX-1315L: $116.57 (Newer style chassis.) ‘06-‘18, 1500 4WD (non-Mega Cab) SMX-1300L: $134.55 ‘11-‘12, 2500/3500 4WD & ‘13, 2500 SMX-1311L: $89.55 ‘06-‘10, 4WD including 1500 Mega Cab SMX-1227L: $85.05 ‘03-‘05, 4WD SMX-1226L: $85.05 ‘00-‘02, 4WD SMX-1225L: $80.55 April ‘95-‘99, 4WD SMX-1224L: $85.05

4 WHEEL-DRIVE 2 WHEEL-DRIVE Steering Box Stabilizer

FRONT

‘13-‘18, 4WD

REAR ‘07-‘12, 2WD & 4WD

REAR - STANDARD HEIGHT TRUCKS ‘07-‘12, 2WD & 4WD 4500 SMX-7382: $152.55 ‘94-‘02, 4WD w/Factory Sway Bar SMX-7371: $134.96

‘03-‘17, 2500/3500 4WD BD-1032003:  $201.00 ‘94-‘02, 2WD BD-1032002:  $201.00 ‘94-‘02, 4WD BD-1032004:  $201.00

BD’s Steering Box Stabilizer (SBS) eliminates steering wander and wobble caused by excessive shaft play in the steering box of latemodel Dodge trucks. Designed for easy, bolt-in installation (about one hour). The SBS virtually eliminates frame flex at the steering box mounting point, resulting in more positive steering feel. The BD SBS is black powder coated for corrosion resistance and features a greasable, high-quality bearing for reliable operation.

These links are self aligning and constantly preloaded, maintenance free, and impervious to salt and debris. MAXX Links replace the wear-prone stabilizer link completely. The sway bar end link kit contains: • Two link pin axle studs manufactured from heat treated 4140 alloy steel • Four high-performance urethane bushings • Two vertical bolts sleeves • Sway bar end link bushings • All fasteners

2-Low Transfer Case Kit

Adjustable Track Bar Kits (‘94-‘12) ‘03-‘12, 4WD BD-1032013: $399.00

‘94-‘02, 4WD BD-1032011: $585.00

With the OEM ball joint design on ‘94-‘12 trucks, frequent maintenance is required to prevent side-to-side movement of the front axle which can cause wear, hammering, wandering and the dreaded “Death Wobble.” BD’s Track Bar is a good solution for steering stability and is a great complement to BD’s Steering Box Stabilizer. Plus, it is adjustable to accomodate up to 3”-4” lifts.

42 l Ram Turbo Diesel Parts & Accessories  #101

‘13-‘18, Ram 3500, ‘14-‘18, Ram 2500 ‘09-‘18, Ram 1500 BD-1030705:  $148.00

‘94-‘01, Ram 2500/3500 BD-1030703:  $148.00

This kit is designed to allow the truck owner to manually disable the front wheel drive mechanism by holding the hubs free (2WD) mode with the transfer case in 4WD-Low range. With this BD kit installed, the front wheels will NOT be driven through the transfer case.

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


Front End Control Arm Bushing Set, 4WD ‘03-‘09, 2500/3500 ES_53142G:  $129.27

(To check proper fit, see website for dimensions.)

‘99-‘02, 2500/3500* ES_53131G:  $111.38 ‘99-‘02, 2500/3500* ‘94-‘99, 2500/3500 ES_53120G:  $109.95

RP28444:  $379.00

Rare Parts, Inc. manufactures this direct replacement, adjustable heavy duty track bar for Dodge Ram trucks. Pregreased with synthetic lubricant. Direct bolt-on. No conversion brackets to install.

*NOTE: ‘99-‘02 model trucks can use either 5.3131G or 5.3120G kits. It depends on the diameter of the bottom mounting bolt. If the bottom mounting bolt is 9/16” you will need 5.3120G. If the bolt is 5/8” you will need the 5.3131G kit.

Leaf Spring Bushing Set, 4WD REAR ‘03-‘09, 2500/3500 ES_52118G:  $112.25 REAR ‘94-‘02, 2500/3500 ES_52119G:  $79.09 FRONT/REAR ‘89-‘93, 2500/3500 ES_52102G:  $25.38

It features: • 1.25” full ball stud Made in USA. • 5x bigger housing • 47% increased wear surface • 13.36 degrees increased stud swing and twice the strength of OEM. • Adjustable to center the axle.

STEERING PITMAN ARM, (‘03-‘08, 2500/3500)

DRM531727:  $29.95

Direct replacement part for a worn or bent center link. Eliminates loose steering and alignment issues related to a worn pitman arm.

NOTE: Does not include frame shackle bushings. NOTE: For 1” eye only.

REPLACEMENT TRACKBAR BUSHING (‘08-‘12) RP22442:  $17.95 each

Sway Bar Frame Bushings

STEERING, SUSPENSION & BRAKES

DIRECT REPLACEMENT TRACKBAR (‘94-‘02)

Fits like OEM. 2 required. Sold individually.

‘94-‘12 (34MM)  ES_55159G: $22.13** ‘94-‘12 (33MM)  ES_95186G: $25.43* ‘94-‘12 (32MM)  ES_55126G: $25.35 ‘94-‘12 (30MM)  ES_55127G: $25.35

Luke’s Link Replacement Trackbar Bushings

NOTE: M  easure sway bar diameter before ordering. Bushings not available for all sizes. **NOTE: R  eplacement metal brackets and washers not included with 34mm kit. You must re-use OEM brackets and washers. *NOTE: E nd link bushings not included with 33mm kit. Sold separately.

‘03-‘07 - RED BUSHINGS

LUKESLINK_BUSHINGKIT2:  $42.00/pair NOTE: Fits 2007 trucks built prior to 3/18/2007.

‘03-‘07

Sway Bar End Link Bushing

Factory hardware is reused to install the bushings.

‘94-‘02 - BLACK BUSHING

‘94-‘18, 2500/3500 ES_8084G:  $1.50

LUKESLINK_BUSHING_IND:  $18.00

Sold individually.

‘94-‘02

(Only 1 bushing required.)

One of the weakest points on the ‘94-‘07 Ram 4WD truck suspension is the trackbar and tie rod ends. Install these polyurethane bushings to tighten up the bar-to-frame connection. Cab Mount Bushing Set

Luke’s Link Trackbar & Tie-Rod End Rebuild Kit (‘94-‘02, 4WD only)

‘03-‘05, 2WD & 4WD Regular Cab ES_54116G:  $229.93 ‘03-‘05, 2WD & 4WD Quad Cab ES_54115G:  $305.41 ‘94-‘02, 2WD & 4WD Regular Cab ES_54107G:  $112.25 ‘94-‘02, 2WD & 4WD Quad or Extended Cab ES_54109G:  $147.03

Motor Mount REINFORCEMENTS ‘98.5-‘02, 24V ES_51116G:  $46.25 ‘94-‘98, 12V ES_51114G:  $54.54 Motor mount inserts sold in Black only. NOTE: These are not replacement bushings, just reinforcements.

INDIVIDUAL LUKESLINK_TBRKIT:  $72.00 SET OF 4 LUKESLINK_TBRKIT:  $249.95

Use Luke’s Link’s heavy-duty kit to rebuild ‘94-‘02 trackbars and tierod ends to better than new. The installation of this kit should last the life of the truck. It is greaseable and adjustable if it ever comes loose. Luke’s Link will also rebuild any of the four tie-rod ends.

REAR

NOTE: Does not work on trucks with MOOG track bars. Will not fit over 2-1/16” diameter bar.

FRONT Axle Bump Stops, 4WD

‘03-‘09, 2500/3500 (FRONT) ES_59105G: $30.84 ‘03-‘09, 2500/3500 (REAR) ES_59104G: $80.18

Catalog good through October 2018 l Prices subject to change without notice.

Control Arm Bump Stop, 2WD (‘03-‘13, 2500/3500) 52113300AB:  $33.95

Eliminate suspension “crash” by replacing worn out bump stops with a set of OEM bump stops. Sold individually.

Order 770-886-2500 or genosgarage.com

l 43


STEERING, SUSPENSION & BRAKES

3-year manufacturer warranty.

NEW Steering Box (‘03-‘08, 4WD) ‘03-‘08 (6 BOLT) BORG-800123:  $659.99

NOTE: Does not work with aftermarket steering box braces.

NOTE: A Borgeson Steering Shaft (BORG-000950 or BORG-000945) is recommended for the installation of this steering box.

Borgeson has sourced and adapted a brand new Delphi 684 series power steering box for the ‘03-‘08 Ram trucks. The Borgeson/Delphi 684 series “Dodge Box” offers the largest piston diameter for the most available power assist and a modern variable valve for stable highway driving.

NEW! NOT REBUILT! 3-year manufacturer warranty.

Fits all OEM and dropped pitman arms. Uses OEM pitman arm.

REMAN Steering Box (‘94-‘02 4WD) BORG-800112:  $429.00

The 800112 steering box offered for ‘94-‘02 trucks is a reman unit. Your truck’s original steering box was engineered in the 1960s, called a Series 700, and was made by Delphi. The replacement unit is also made by Delphi, but it was designed in the 2000s and it is called a Series 680. So what makes the Delphi Series 680 a better mousetrap?  odern internal valving provides a variable assist feel to the driver’s steering M input. The further you turn the wheel the greater the assist. The benefits to you: the power assist is limited in the centered position to help the vehicle track straight on the highway. • The Borgeson replacement steering box is a 13:1 ratio. The old box was a 16:1. The benefit to you: effectively 3.5 turns from lock-to-lock compared to 4.5 turns. • L arger internal piston diameter (80mm) for greater power assist. • L arger diameter bearings support the output/Pittman shaft. •

If you use a Borgeson Replacement Steering Shaft (part numbers 000950 or 000945), the steering box installation is a simple bolt-inplace operation. The Borgeson box and shaft are a full-circle spline design. To use the steering box with your truck’s existing steering shaft (a female, D-shaped spline design), the Borgeson input shaft adapter (male, O-shaped) will have to be cut-down with a grinding wheel.

“Call Scott with Questions” or see our website for more information about this PSC steering box.

“BIG BORE xd” Steering Box (‘94-‘02, 4WD) ‘94-‘99 with “Y” style linkage PSC-SG852K1: $695.00 ‘98-‘02 with “T” style linkage PSC-SG852K3: $695.00 NOTE: Does not work with aftermarket steering box braces.

The second generation Dodge 2500/3500 4WD truck steering gears have always had failures to the lower sector shaft bearing and seals due to the single bearing design. PSC now offers a brand new extreme duty gear box replacement that offers a 45MM bearing and sector shaft to eliminate any side to side flex. The PSC Dodge XD steering gear features a 13:1 ratio for easier parking and less turns lock to lock along with a modern variable valve for stable highway driving and effortless maneuvering. The factory pitman arm can be reused. NOTE: Due to the increased overall size of the BIG BORE XD steering box, spacers are included in the kit to space the gear box off the frame. There is a 1” difference from the OEM steering gear. We suggest trimming the draglink and tie-rod at the pitman arm 1/2” to clear for alignment. ‘79-‘93 w/U-joints

High-Flow Power Steering Pump (‘94-‘02)

‘95-‘02

BORG-800328:  $185.25

Second Generation truck owners take note: Are you looking for a power steering pump that gives better performance than the OEM unit at a lower price? The Borgeson power steering pump is a direct replacement for ‘94-‘02 Dodge Turbo Diesel 2500 and 3500 trucks. Pump output pressure/flow is increased from 1,450 psi to 1,550 psi and from 3.5 gpm to 4.5 gpm. When replacing the power steering pump, steering box or hoses, it is mandatory to flush the power steering system and to bleed the system. Failure to do so will result in damage to these parts and void the manufacturer warranty. Instructions on how to bleed the power steering system are included.

1997-2002 Hydro-Boost Brakes BORG-925117:  $99.75

Replacement Steering Shaft  (‘03-‘08) 2WD

BORG-000952: $305.00

Replacement Steering Shaft  (‘03-‘08) 4WD

BORG-000951: $270.00

Replacement Steering Shaft  (‘95-‘02)

BORG-000950: $270.00

Replacement Steering Shaft  (‘94)

BORG-000945: $270.00

Replacement Steering Shaft  (‘79-‘93)

1994-1996 Vacuum Brakes BORG-925116:  $61.75

An OEM-style rubber hose kit for ‘94-‘02 Dodge ram trucks. If you are installing a new power steering pump it is a good idea to replace the power steering hoses to avoid contamination of the new pump. Kits include pressure and return hoses and all clamps.

44 l Ram Turbo Diesel Parts & Accessories  #101

Steering Shafts

Depending on usage, the Dodge steering coupler can show signs of wear in as little as 50,000 miles. This wear, which causes play in the truck’s steering, is even more noticeable if your truck is used for plowing, towing or if oversized tires have been installed. Replacing the worn steering shaft with another OEM shaft only gives you a temporary fix. Borgeson has replacement steering shaft assemblies with precision needle bearing u-joints available for ‘79-‘08 Dodge trucks. APPLICATION

Power Steering Hose Kits

‘79-‘93 w/Rag Joint Flange

Steering column must have removable rag joint. Full-Size Dodge with 2 U-Joints

Replacement Steering Shaft  (‘79-‘93)

Full-Size Dodge with Rag Joint Flange

Replacement Rubber Rag Joint Disk  (‘79-‘93)

BORG-000943: $236.00 BORG-000940: $189.00 BORG-000941: $16.62

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


3500 DRW TRUCKS ‘12-‘18 SAST-D1215DRW:  $1750.00 ‘10-‘11 SAST-D1011DRW:  $1750.00 ‘09 SAST-D09DRW:  $1750.00 ‘00-‘08 SAST-D0008DRW:  $1750.00 2500/3500 SRW TRUCKS ‘12-‘18 SAST-D1215:  $1550.00 ‘10-‘11 SAST-D1011:  $1550.00 ‘09 SAST-D09:  $1550.00 ‘00-‘08 SAST-D0008:  $1550.00 ‘94-‘99 SAST-D9499:  $1550.00 (no ABS)

SINGLE REAR WHEEL HUB KIT

NOTE: ‘13-‘18 2500/3500 SRW truck (Bighorn or Longhorn) hub conversion will not work on trucks with OEM aluminum wheels with small Ram center cap without modifying the wheels. They need a minimum clearance of 4.224”.

With greater frequency we have listened as customers have asked for manual locking front hubs.

STEERING LINKAGE UPGRADE KIT, T-STYLE (‘03-‘12) RAM 2500/3500 LINKAGE MOP-52122362AL:  $450.00 LINKAGE KIT NUT (3 REQUIRED FOR INSTALL) MOP-6505623AA:  $2.95 each NOTE: If replacing the steering linkage or drag link inner tie rod assembly at the pitman arm on a vehicle built before February 14, 2008, verify that the pitman arm part# is 68039930AA. If not, it must be replaced with our part# DRM531727. NOTE: Steering damper sold separately. ‘03-‘07 model trucks will need the ‘08-‘12 model steering damper.

In recent Turbo Diesel Register magazines there have been articles on these products (Issue 82 and Issue 62) that discussed the pros and cons of this accessory, the primary benefit being reduced wear on the front drivetrain: the axle shafts and corresponding differential gearing are disengaged. Other benefits: fuel economy thanks to the elimination of 150-pounds of rotating mass, universal joint wear is all but eliminated and a user-serviceable set of wheel bearings.

Steering Dampers

We’re thrilled to offer you the SpynTec designed front manual hubs.

STEERING, SUSPENSION & BRAKES

DUAL REAR WHEEL HUB KIT

Front Manual Locking Hub Conversions

Front Axle Universal Joints

SPICER ‘10-‘18, Ram 2500/3500 SAST-UJ68065428AC:  $125.95

 Steering Box Stabilizer (‘94-‘17)

‘09-‘17, 4WD 2500/3500 PPM-8559-04:  $170.00

SPICER ‘03-‘09, Ram 2500/3500 SAST-UJ5006813:  $62.00

SPICER ‘94-‘02, Ram 2500/3500 SAST-UJSPL55-3X:  $55.90

B8 5100 DUAL STEERING DAMPER KIT RAM 2500 (‘14-‘18, 2500 4WD)  RAM 3500 (‘13-‘18, 3500 4WD) BIL-53-264817:  $205.95

‘03-‘08, 4WD 2500/3500 PPM-8558-04:  $170.00

‘94-‘02, 4WD 2500/3500 PPM-8557-04:  $170.00

Ties frame horns together to help eliminate steering box “wander.” Bolt-in.

RAM 2500 (‘13, 4WD) RAM 2500/3500, Cab & Chassis (‘08-‘12, 4WD) BIL-33-170794:  $80.95

Adjustable Track Bar Kit (‘03-‘12)

RAM 2500/3500, Cab & Chassis (‘03-‘07, 4WD) BIL-24-164870:  $89.95

4WD 2500/3500  PPM-8550-01:  $300.00 • Bent to clear most aftermarket differential covers • Made from high quality 1-3/8” 1045 solid tubing • Allows centering of front axle when running a suspension lift • FK Bearing heavy duty heat treated 7/8” chromoly rod end at axle end • Synergy Suspension double adjuster sleeve & pinch bolt assembly allows for adjustment of track bar length without removing control arm mounting bolt • 100% bolt-on components assures a trouble free installation with the use of basic hand tools

Track Bar Conversion Kit (‘94-‘02)

Help dampen steering vibrations and restore the steering control of your ‘03-‘18 Dodge Ram truck. NOTE: If the Mopar steering upgrade has been performed, you will need the ‘08-‘13 steering damper.

HEAVY-DUTY 4WD Steering Dampers (‘00-‘18)

‘13-‘18

4WD 2500/3500  PPM-TBCK-0002:  $475.00

*Pinch bolt on track bar faces up. • Eliminates the weak link in the otherwise stout 4x4 Ram chassis which has been plagued for years due to its poor track-bar design • Converts the stock ball-joint style TB to the newer ‘03-current bushing style track-bar • Compatible on trucks with -1” lift to +3” of lift • Tightens up steering and suspension feel and helps eliminate dreaded “Death Wobble” • Includes all hardware for a bolt-on installation

Catalog good through October 2018 l Prices subject to change without notice.

‘08-‘13

‘00-‘07

‘14-‘18, RAM 2500 ‘13-‘18, RAM 3500, Cab & Chassis MOP-68232449AC:  $157.95 ‘13, RAM 2500 ‘08-‘12, RAM 2500/3500, Cab & Chassis MOP-5154661AB:  $109.95 ‘03-‘07, RAM 2500/3500, Cab & Chassis MOP-52106909AE:  $85.95 ‘00-‘02, RAM 2500/3500 MOP-52106909AC:  $81.95 NOTE: If the Mopar steering upgrade has been performed, you’ll need the ‘08-‘13 steering damper.

Order 770-886-2500 or genosgarage.com

l 45


DRIVERTRAIN PARTS & ACCESSOIRES

(‘03-‘18) Adj. HYD-X-750: $315.00 SOUTH BEND CLUTCH Heavy-Duty Hydraulic Clutch Slave and Master Cylinder Assembly No bleeding of master cylinder required.

‘07.5-‘12 10304

(‘98-‘02) Adj. HYD-X-150: $315.00 (‘94-‘97 ) Non-Adj. HYD-X-HD: $315.00 (‘89-‘93) Non-Adj. HYD-GEN1: $242.50 OEM style.

DORMAN Automatic Transmission Pressure Transducer (‘11-‘18) Trucks with 68RFE transmission.

NEW! DRM601215 $52.95

DORMAN Automatic Transmission Pressure Transducer (‘00-‘07) Trucks with the 47RE and 48RE transmissions.

DRM601016 $54.00

DORMAN Automatic Transmission Output Speed Sensor (‘94-‘07)

DRM917602 $14.95

MOPAR Front Axle Locker (‘13-‘18, 4x4) ‘13-‘18 Ram 3500 ‘14-‘18 Ram 3500 Chassis/Cab ‘14-‘18 Ram 2500

  transmission pans 68216944AA $395.00

DORMAN Transfer Case Shift Motor  (‘13-‘18, 6.7L) Trucks with transfer case Model BW44-46

DRM600908 $139.95

DORMAN NV273 Transfer Case Shift Motor (‘06-‘12)

DRM600935 $236.00

For Ram 2500/3500/4500/5500 trucks.

‘89-‘07 9393

STANDARD TRANSMISSION PANS ‘13-‘18, 6.7L 3500/4500/5500 Aisin AS69RC (+3qt to 4qt. w/4WD & 2WD) PML11142:  $345.00

‘07.5-‘12, 6.7L Chassis Cab only. Aisin AS68RC PML11139:  $395.00

‘07.5-‘18, 6.7L 68RFE (+2.5qt. w/4WD; +3qt. w/2WD)

‘89-‘07, 5.9L (47RE or 48RE) PML9393  $220.00

(Will not work in trucks equipped with Aisin transmission.)

PML10304:  $245.00

EXTRA-DEEP TRANSMISSION PAN DORMAN Transfer Case Shift Linkage with Grommets (‘11-‘12) For Ram 1500/2500/3500 trucks with 271 transfer case.

NEW! DRM926884 $25.95

‘07.5-‘12, 6.7L 68RFE (+4qt. w/4WD; +4.5qt. w/2WD)

(Will not work in ‘13-‘18 trucks equipped with Aisin transmission.)

PML11039:  $244.95

DORMAN Transfer Case Shift Linkage Grommet (‘03-‘08) For use with 241 and 271 transfer cases.

DRM14078 $6.95 each

NOTE: PML pans are designed to work with the OEM reusable gasket. Depending upon the number of times you have already changed the fluid, it may require the purchase of a new transmission pan gasket.

DORMAN Transfer Case Indicator Mode Switch (‘03-‘13)

DRM600555 $41.95

The cast aluminum PML pans feature a magnetic drain plug and 1/4” fins for cooling. The pans have a flat area where you can drill and tap for a 1/8 NPT to 1/2 NPT transmission temperature sender.

DORMAN Transfer Case Switch (‘97-‘02)

DRM600550 $9.95

DORMAN Transfer Case Switch (‘94-‘00)

DRM600553 $13.95

For trucks with 271 Series transfer case.

DORMAN Axle Actuator Housing, 4WD (‘94-‘02)

DRM917500 $19.95

DORMAN Axle Actuator, 4WD (‘94-‘02)

DRM600202 $98.95

MOPAR Transmission Kickdown Cable Return Spring (‘90-‘04)

53009055 $4.95

DORMAN G56 Manual Transmission Inner Shift Boot (‘05-‘18) Low-cost CV axle boot alternative.

DRM614002 $25.00

MOPAR 8HP70 8-Speed Automatic Transmission Fill Plug  (‘14-‘18)

68145443AA $15.95

MOPAR Aisin AS69RC Transmission Drain Plug Gasket (‘13-‘18)

46 l Ram Turbo TurboDiesel DieselParts Parts&&Accessories  Accessories #101 #101

68085955 $5.95

TRANS-COOL Manual TransMISSION Coolers DUAL COOLERS KIT

‘05-‘18, G56 TRANSCOOL_2:  $239.95 ‘94-‘05, NV4500/NV5600 TRANSCOOL_3:  $239.95 ‘89-‘93, Getrag 360 TRANSCOOL_1:  $239.95

SINGLE COOLER KIT

‘05-‘18, G56 TRANSCOOL_SGL_2:  $126.95 ‘94-‘05, NV4500/NV5600 TRANSCOOL_SGL_3:  $126.95 ‘89-‘93, Getrag 360 TRANSCOOL_SGL_1:  $126.95 Specify truck year and transmission when ordering.

The TRANS-COOL cooling system is designed to transmit heat from the inner surfaces to the air-cooled outer fins which helps dissipate heat from the transmission. The coolers add an additional quart of trans fluid to the gearbox. Depending on the TRANS-COOL kit, it includes: aluminum cooler(s); PTO gasket(s); twelve or six PTO bolts and washers; and 1/8 NPT temperature gauge ports with plugs. Check for possible clearance problems with a larger aftermarket exhaust system before ordering. You will need a minimum of 4 inches of clearance from the base of the PTO mounting surface.

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


Magnetic drain plug 68RFE TranSMISSION Pan (‘07.5-‘18, 6.7L)

We include a transmission filter with your purchase.

MH-68RFE-A:  $299.95

Mag-Hytec’s high-capacity deep sump for the 68RFE transmission provides for an additional 3 qts. of fluid for maximum cooling from its finned aircraft aluminum construction. A 1/8 NPT temperature sender port lets you add a temperature gauge to keep tabs on fluid temperatures during heavy-duty use or long tows. When it is time for a fluid change, a magnetic drain plug makes draining the fluid easy and lets you see if there are any contamininants in the fluid. Freddie Frugal includes a replacement sump filter with the purchase of the 68RFE pan. The customer is responsible for the Mopar 5179267 spin-on filter (page 5).

Fast Coolers-Pair, ‘94-‘05 NV4500 & NV5600 FC-2FC300:  $169.00 Fast Cooler-Single, ‘94-‘05 NV4500 & NV5600 FC-1FC300:  $89.00 G56 Adapter Kit, ‘05-‘18 FC-G56-ADAPTER:  $28.00 G56 Single Side Adapter Kit, ‘05-‘18 FC-1G56:  $15.00 Filter Kit, ‘89-‘17 FC-FILTERKIT:  $39.00 Filter Kit Replacement Filter, ‘89-‘18 FC-REPFILT:  $12.00

Check for possible clearance problems with a larger aftermarket exhaust system before ordering. You will need a minimum of 3 inches of clearance from the base of the PTO mounting surface.

Looking for a way to dissipate heat from your 5-speed or 6-speed manual transmission? The answer is the Fast Cooler! Made from extruded aluminum, the finned coolers add gearbox fluid capacity by two quarts (one quart per side). The coolers also have a 1/4 NPT fitting to allow the owner to easily add a transmission temperature sending sensor. • Fast Coolers ship with sealant, hardware, and instructions. • Uses stock PTO covers on end of tubes. • For use with stock exhaust systems.

Cover with Sight Glass

SIGHT GLASS & BLANK COVER FC-SG-COVER-KIT:  $59.00 SIGHT GLASS ONLY FC-SG-COVER-SINGLE:  $39.00

Check the fluid level with a quick glance.

Catalog Prices subject to change change without Catalog good good through through October October2018 2018 l Prices withoutnotice. notice.

  I

Deep TranSMISSION Pan (‘89-‘07) ‘98-‘07 MH-727-9803:  $247.00 ‘89-‘97 MH-727-9497:  $247.00

DRIVETRAIN PARTS & ACCESSORIES

Cast of 356T6 Aluminum and black powercoated

NOTE: Also fits ‘03-‘07 HD 48RE transmission.

Use the Mag-Hytec Deep Pan to add capacity to your stock 727, 518, 47RE or 48RE automatic transmission. The pan for years ‘94-‘97 will increase the lube capacity by 1.5 quarts. The pan will not increase the capacity of the ‘98 and up model 47RE transmissions as Dodge enlarged the factory pan. The Mag-Hytec Deep Pan has a magnetic drain plug, pre-drilled 1/8 NPT fitting for a temperature sensor, transmission gasket, and mounting hardware.

Increased fluid and cooling capacity

Cast of 356T6 Aluminum and black powercoated

We include a transmission filter with your purchase of a pan.

  I

‘Double Deep’ Transmission Pan (‘89-‘07, 5.9L) ‘98-‘07 MH-727DD-9803:  $275.50 ‘89-‘97 MH-727DD-9497:  $280.25

Fits the stock 727, 518, 47RE or 48RE automatic transmission. The “Double Deep” pan has all the same features as the Deep Pan; magnetic drain plug, pre-drilled 1/8 NPT fitting for a temperature sensor, transmission gasket, and mounting hardware. In addition, with the “Double Deep” pan, the inside depth of the pan is increased from 3” to 5-1/4”, which adds another four quarts of fluid capacity to the system. The pan is still tucked 1/2” above the truck’s center frame cross-member. The kit includes spacer hardware to relocate the transmission filter deep into the sump.

Order Order 800-755-1715 770-886-2500 or genosgarage.com genosgarage.com

l 47


DRIVETRAIN PARTS & ACCESSORIES

‘13-‘18, Ram 1500 9518

Front DiffERENTIAL Covers

9.25 DIFF COVER (‘14-‘18, 2500 & 13-‘18, 3500) MH-AA12-925:  $295.00

Increases capacity from 2.5 quarts to 4.5 quarts.

9.25 DIFF COVER (‘03-‘12, 3500 & ‘03-‘13, 2500) MH-AA14-925: $280.25

‘03-‘12, 9.25 11118

Increases capacity from 2.5 quarts to 4.5 quarts. NOTE: Effective July 2012, Mag-Hytec redesigned the cover to alleviate interference with the trackbar and steering damper. However, it is possible that modifications will have to be made to the U-bolt bracket or to the cover itself for clearance issues. It is important to pay very close attention to detail during installation. Once the cover has been installed or modified to work it cannot be returned.

Dana 60 (‘89-‘02) MH-DA60: $270.75 Increases capacity from 3.5 to 4.5 quarts.

Dana 60 w/Vented Cover (‘02)  MH-DA60-VENT:  $270.75

(Only Fits ‘02 Trucks with Vented Cover) CAUTION: Installation of front cover is just a bit more involved than for Mag-Hytec rear differential covers. You need to pop the driver’s side tie-rod end loose from the steering knuckle to give clearance between the ring gear and the steering rod.

Mag-Hytec front differential covers increase the fluid capacity over the stock cover. They are a perfect match in appearance and function to the rear differential covers.

‘14-‘18, 14 bolt 11147

Perhaps the most important feature for off-road use of your four wheel drive Dodge Ram is the angled ramp on the bottom half of the cover instead of a flat mounting flange. The purpose for this ramp is that if you hit a rock or other obstruction on the trail, the differential will tend to ride up and over it instead of smashing the cover into the gears.

FRONT DIFFERENTIAL COVERS

REAR DIFFERENTIAL COVERS

‘13-‘18, 3500 & ‘14+, 2500 AAM 12-9.25   12 Bolt (+.50qt.) PML11136:  $195.00

‘03-‘13, 2500 & ‘03-‘18, 3500 AAM 11.5  14 Bolt (+.75qt.) PML10361:  $195.00

‘03-‘12, 3500 & ‘03-‘13, 2500 AAM 14-9.25 Low Profile   14 Bolt (+.50qt.) PML11118:  $195.00

‘03-‘13, 2500 & ‘03-‘18, 3500 AAM 11.5  14 Bolt (+.75qt.) PML10361:  $195.00

‘14-‘18, 2500 AAM 11.5  14 Bolt (+.50qt.) PML11147:  $195.00

‘03, 2500 AAM 10.5 14 Bolt (+.80qt.) PML10302:  $195.00 ‘94-‘02 Dana 80 10 Bolt (+.80qt.) PML9520:  $195.00

NOTE: PML pans are designed to work with the OEM reusable gasket. Depending upon the number of times you have already changed the fluid, it may require the purchase of a new differential cover gasket.

1/8 NPT temperature sending unit fitting Increased lubricant and cooling capacity

‘94-‘02 & ‘89-‘93 2500/3500 Dana 70 10 Bolt (+.80qt.) PML9426:  $195.00 ‘09-‘18 Ram 1500 12 Bolt (+.80qt.) PML9518:  $195.00

The PML differential covers feature a low profile for clearance and oil fill/level check and drain holes to make it easy to follow the 15K oil change interval. Extra capacity, fins, and aluminum construction aid in heat dissipation to keep fluid cool.

Rear Differential Covers

DIFFERENTIAL COVER AND TRANSMISSION GASKETS Differential Cover Gasket - REAR  (‘03-‘18) 11.5 and 11.8 American Axle  (ALL except ‘03 Automatic)

MOP-5086905AA

$34.95

Differential Cover Gasket - REAR  (‘03) 10.5 American Axle  (2500 Automatic)

MOP-5086777AA

$31.95

Differential Cover Gasket - FRONT  (‘13-‘18)  9.25 American Axle  (‘14-‘18, 2500/3500 & ‘13, 3500)

MOP-68216204AA

$29.95

Differential Cover Gasket - FRONT  (‘03-‘13)  9.25 American Axle  (‘03-‘12, 2500/3500 & ‘13, 2500)

MOP-5086682AA

$34.95

4799964AD

$5.00

MH-68RFE-GASKET

$10.00

68RFE Transmission Filter Lip Seal for Sump Filter  (‘07.5-‘18) Mag-Hytec 68RFE Transmission Pan Gasket  Not for use with OEM transmission pans. Mag-Hytec 727 Transmission Pan Gasket  Not for use with OEM transmission pans.

MH-GASKET

$6.00

Aisin Transmission Pan Gasket  (‘13-‘18)  For AS69RC Automatic transmissions.

68214914AA

$28.95

Aisin Transmission Drain Plug Gasket  (‘13-‘18)  For AS69RC Automatic transmissions. Aisin Transmission Pan Gasket (‘07.5-‘12, 4WD & 2WD)  Aisin AS68RC 6-speed Automatic Transmission Pan Gasket  (‘89-‘07)  5.9L engines. EcoDiesel Transmission Pan, Gasket, Filter and Drain Plug Kit  (‘14-‘18, 3.0L) For the 8HP70 8-speed transmission only.

68085955

$5.95

MOP-68020049AA

$40.95

MSI7784

$13.95

68225344AA

$184.95

EcoDiesel Transmission Pan Gasket  (‘14-‘18, 3.0L)  For 8HP70 8-speed transmission only.

68172556AA

$15.95

EcoDiesel Transmission Fill Plug  (‘14-‘18, 3.0L)  For 8HP70 8-speed transmission only.

68145443AA

$12.95

Find engine gaskets on page 6.

48 l Ram Turbo Diesel Parts & Accessories  #101

Lubricant reference plug

‘94-‘02 Dana 70 (6 qt.) ‘89-‘93, 2500/3500 MH-DA70: $247.00 ‘94-‘02 Dana 80 (8 qt.) MH-DA80: $251.75 ‘03, 10.5 American Axle (6 qt.) MH-AA10-5: $280.25 ‘14-‘18, 2500 11.5 American Axle (8 qt.)  MH-AA11-5CS:  $280.25 For trucks with coil springs.

‘03-‘12, 2500/3500 ‘13-‘18, 3500 without rear sway bar ‘13 2500, 11.5 American Axle (8 qt.)  MH-AA11-5:  $280.25 NOTE: DANA 80/2WD APPLICATIONS When ordering, please let us know if you have a two-wheel drive truck with a Dana 80 and a factory-installed sway bar or Hellwig sway bar so that a sway bar relocation kit can be included with your rear differential cover.

Universal Replacement Drain Plug MH-DRPLUG:  $15.00

If the original drain plug that came with the Mag-Hytec pan or cover gets damaged, we carry this universal replacement. Includes Allen tool.

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


DORMAN Tailgate Handle (‘03-‘09) Constructed of reinforced plastic for longlasting endurance.

DRM80165 $28.00

DORMAN Tailgate Handle Bezel (‘94-‘02) Bezel only.

DRM83200 $5.95

DORMAN Tailgate Hinge Bushing Kit (‘94-‘02)

DRM38641 $8.95

DORMAN Tailgate Hinge Kit (‘03-‘09) 2500/3500 Bushings sold separately.

DRM38650 $15.95

DORMAN Tailgate Hinge Bushing Right Side (‘09-‘17) 1500/2500/3500

NEW! DRM38713 $7.50

DORMAN Tailgate Support Cables (‘03-‘18), Left and Right Sold as a pair.

DRM38542 $15.95

DORMAN Tailgate Support Cable (‘94-‘02), Left or Right Sold individually.

DRM38535 $8.95 each

MOPAR License Plate Lamp Socket and Harness Assembly (‘94-‘02)

5179988AB $15.95

DORMAN License Plate Lamp Socket and Harness Assembly (‘94-‘02)

DRM645748 $11.95

NEW! DORMAN License Plate Light Assembly (‘11-‘15) Does not include light bulb.

RIGHT SIDE DRM68143 $36.95 LEFT SIDE DRM68142 $36.95

MOPAR License Plate Light Assembly (‘03-‘09) Includes light bulb.

RIGHT SIDE 55078094AE $53.95 LEFT SIDE 55078095AE $54.95

DORMAN License Plate Lense (‘94-‘02)

DORMAN Puddle Lamps (‘10-‘18) 1500/2500/3500 Sold as a pair.

DORMAN Tail Light Circuit Strip (‘03-‘06) If the tail lights in your truck stop working, it may not be the bulbs. Over time the contacts can get weak and they will not make good contact with the bulbs. Fix the problem with this replacement tail light strip. Sold individually.

DRM68164 $8.95

NEW! DRM926108 $40.95

EXTERIOR PARTS & ACCESSORIES

REPLACEMENT PARTS

F RE E

SHIPPING!

LiteRiders for trucks equipped with toolboxes and Ram boxes are available. Call for specific part numbers and pricing.

LiteRider Roll-Up  V Tonneau Cover

‘10-‘18, Ram Trucks Long Box LITE-LR34189:  $399.00 Short Box LITE-LR34179:  $389.00 ‘03-‘09, Ram Trucks Long Box LITE-LR4121DL:  $399.00 Short Box LITE-LR4131DS:  $389.00 ‘94-‘02, Ram Trucks Long Box LITE-LR4101DL:  $399.00 Short Box LITE-LR4111DS:  $389.00 Call for Ram 1500 applications.

Our experience with the Agri-Cover roll up tonneau cover has been outstanding and we’re confident this is an affordable product that you should consider as you look for a bed cover. The Agri-Cover fastens on the side rail with a 1” strip of heavy-duty Velcro instead of snaps that can be aggravating to use. Just run your finger down the side rail to fasten the cover on the sides and in less than five seconds, you can open or close the cover. Rubber seals on all three sides of the box helps keep the rain, snow and dirt out, but we don’t claim it to be completely waterproof. Experience has seen the occasional small leak, but for the most part, the cover keeps the entire bed contents well protected from the elements. The Agri-Cover “bows” are sturdy lightweight aluminum round stock that roll up with the cover and self-store at the front of the box. Inside mounted frame rail. The aluminum (no rust) side frames are mounted inside the truck’s side rail or grab rails. With garage door, roll-up type covers, you effectively lose 12 inches at the front of the box with the cover’s storage bin. While the Agri-Cover does have a 2” header bar that the roll rests on, you effectively have full use of the truck bed.

EZ Down, ‘03-‘09 EZ_DOWN:  $39.95

A sudden and uncontrolled drop of a truck tailgate is unsettling – WHAM! Free yourself from the frustration of juggling overflowing loads and properly bracing a dropping tailgate with the EZ Down tailgate damper. The EZ Down installs in minutes. All parts are included in the kit and there are no holes to drill. NOTE: The EZ Down does not help in bringing the tailgate upright to the closed position.

LEFT OR RIGHT SIDE DRM923030 $12.95

TRUCK BED/CARGO AREA LED LIGHT KIT - UNIVERSAL DRM87713:  $35.95

DORMAN Door Hinge Pin & Bushing Kit (‘89-‘93) Kit does two doors.

DRM703272 $5.95

DORMAN Door Striker Bolt (‘89-‘93)

DRM38442 $7.95

Catalog good through October 2018 l Prices subject to change without notice.

Add light to your truck bed or vehicle cargo area with Dorman’s Truck Bed Lighting Kit. This kit utilizes bright 5050SMD LEDs to cover your truck bed or vehicle cargo area in a brilliant white light. Everything needed to perform the installation is included.

Order 770-886-2500 or genosgarage.com

l 49


EXTERIOR PARTS & ACCESSORIES

F RE E

SHIPPING!

All PowerSteps ship with light kit. PowerStep RUNNING BOARDS 

I

  V

‘16-‘17, 2500/3500 - Plug-n-Play Model

AMP-76139-01A:  $1,499.00

‘10-‘15, 2500/3500 and ‘09-‘15, 1500

AMP-75138-01A:  $1,399.00

‘03-‘09, 2500/3500 and ‘02-‘08, 1500

AMP-75101-01:  $1,399.00

‘06-‘09, 2500/3500 and ‘06-‘08, 1500

AMP-75118-01:  $1,399.00

Plug-n-Play Conversion Kit (‘13-‘18) Factory Air Ride Air Tank Relocation Kit

AMP-76402-01A:  $175.00 AMP-10-79101-01A:  $33.00

Factory Air Ride Air Tank Relocation Kit

AMP-10-79102-01A:  $62.00

Plug-n-Play Pass Through Harness Kit

AMP-76404-01A:  $85.00

All Cabs - Regular, Quad, Crew, Mega All Cabs - Regular, Quad, Crew, Mega Quad Cab

Mega Cab

HEAVY-DUTY ‘SCRUBBLADE’ WINDSHIELD WIPERS

2500/3500 Crew Cab (Compatible only with 76139-01A and 75138-01A)

2500/3500 Mega Cab (Compatible only with 76139-01A and 75138-01A)

20” BLADE ‘94-‘02, 2500/3500 ‘94-‘01, 1500 SB2000: $16.95 Single / $30.00 Pair

24” BLADE ‘03-‘09, 2500/3500 ‘03-‘10, Chassis/Cab ‘02-‘08, 1500 SB2400: $16.95 Single / $30.00 Pair

18” BLADE ‘89-‘93, 150/250/350 SB1800: $16.95 Single / $30.00 Pair

We’re always on the lookout for products that represent the best value for your money. At the 2017 SEMA Show we discovered the Scrubblade.

Allows you to have an open OBDII port when AMP PowerStep is installed with the Plug-n-Play Kit (Freddy Frugal: see Auto Meter adapter on page 7.)

Dodge Quad Cab and Mega Cab owners have to look no further than the AMP Research PowerStep for a great accessory. Two Turbo Diesel Register writers installed and reviewed these steps. Based on their favorable comments, we ordered and installed the AMP PowerStep Kit, and we agree. These steps are outstanding. There are no holes to drill as the kit utilizes existing holes in the body. The factory instructions are thorough, and the installation was not difficult. We even have a video at our website that shows you how to install the steps. The fit and finish are flawless. 600 lbs. capacity. Form: The AMP Research design tucks up and under the truck’s side pinch rail. In the up position, they are out of sight, leaving your truck with a clean, uncluttered look. Function: In the down position (eight-inch drop), you can’t beat the full-length step board for ease-of-entry/exit access to your truck. NOTE: Additional shipping charges apply to steps shipping to Alaska and Hawaii.

22” BLADE ‘10-‘18, 2500/3500 ‘11-‘18, Chassis/Cab ‘09-‘18, 1500 SB2200: $16.95 Single / $30.00 Pair

We asked, “A rubber wiper blade is a rubber wiper blade, right?” As it turns out (a long story), rubber compounds greatly differ and you get what you pay for. With a closer look we noticed the Scrubblade’s dual blades, the patented scrub pattern and scrub “nibs.” These are three features that make these wiper blades worthy of your attention. Finally, the Scrubblade is competitively priced. So: premium rubber + great design + good price = best value.

“RAM 3500” 24V Emblem

“RAM 3500” 12V Emblem

MOPAR OEM emblem for ‘98.5-‘02 24-valve trucks.

MOPAR OEM emblem for ‘94-‘98 12-valve trucks.

“RAM 2500” 24V Emblem

“RAM 2500” 12V Emblem

MOPAR OEM emblem for ‘98.5-‘02 24-valve trucks.

MOPAR OEM emblem for ‘94-‘98 12-valve trucks.

55295314AC: $59.95

55295313AC: $56.95

Made in USA. Bed Step™

‘10-‘18, 2500/3500 AMP-75306-01: $240.00 ‘09-‘18, 1500 Standard Exhaust AMP-75306-01: $240.00 ‘09-‘18, 1500 Dual Exhaust AMP-75310-01: $260.00 ‘03-‘09, 2500/3500 AMP-75304-01: $240.00 ‘02-‘08, 1500 AMP-75304-01: $240.00

The AMP Research Bed Step gives easy access to pickup beds even with the tailgate down. It is made from high-strength aluminum alloy with a durable powdercoat finish to provide long-term durability. Rugged stepping platform supports up to 300 pounds of weight. Designed with a spring-loaded cam, the Bedstep stows away and deploys with a flip of the foot. Easy five-minute bolt-on installation. NOTE: Bed Step attaches to stock bumper only. Will not work with aftermarket bumpers.

50 l Ram Turbo Diesel Parts & Accessories  #101

Grille emblem ‘10-‘12, 2500/3500 ‘09-‘12, 1500 68050754AA: $56.95

MOPAR OEM emblem. Measures 110mm wide.

Grille emblem ‘03-‘05, 1500/2500/3500 5073290AB: $44.95

MOPAR OEM emblem. Measures 61mm wide.

55295314AB: $60.95

55295313AB: $60.95

Grille emblem

‘10, 3500 Chassis Cab ‘03-‘09, 2500/3500 ‘03-‘08, 4500/5500 68139834AA: $48.95 NEW!

MOPAR OEM emblem. Measures XXmm wide.

Grille emblem ‘94-‘02, 2500/3500 ‘94-‘01, 1500 55295240: $44.95

MOPAR OEM emblem.

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


Manufactured by All-Sales and made in the USA. Brushed Aluminum  V

‘13-‘18  AS-6047BL - LOCKING Fuel Door:  $75.95** ‘10-‘12  AS-6042B - Fuel Door:  $70.95* ‘10-‘12  AS-6042BL - LOCKING Fuel Door:  $74.95* ‘03-‘09  AS-6041B - Fuel Door:  $79.95 ‘03-‘09  AS-6041BL - LOCKING Fuel Door:  $89.95 ‘94-‘02  AS-6040B - Fuel Door:  $74.95 ‘94-‘02  AS-6040BL - LOCKING Fuel Door:  $79.95 Polished Aluminum  V

‘13-‘18  AS-6047P - Fuel Door:  $84.95** ‘13-‘18  AS-6047PL - LOCKING Fuel Door:  $88.95** ‘10-‘12  AS-6042P - Fuel Door:  $89.95* ‘10-‘12  AS-6042PL - LOCKING Fuel Door:  $95.95* ‘03-‘09  AS-6041P - Fuel Door:  $89.95 ‘03-‘09  AS-6041PL - LOCKING Fuel Door:  $89.95 ‘94-‘02  AS-6040P - Fuel Door:  $85.95 ‘94-‘02  AS-6040PL - LOCKING Fuel Door:  $94.95

Aluminum Green ‘DIESEL’ FUEL FILL Cap

‘13-‘18, 6.7L LT-DIESEL-CAP: $23.95 ‘14-‘18, Ram 1500 EcoDiesel LT-DIESEL-CAP1: $23.95

This billet dust cap has an external O-ring that slides into the fuel fill neck. There is a magnet recessed into the base so that you can put the fuel cap on the back side of the door when filling the tank.

Aluminum ‘DEF’ Filler Cap ‘13-‘18, Ram 2500/3500 LT-DEF-CAP:  $35.00 ‘14-‘18, Ram 1500 EcoDiesel LT-DEF-CAP1:  $35.00

Flat Black

‘94-‘12  AS-6950K - Fuel Door:  $98.95** ‘94-‘12  AS-6950KL - LOCKING Fuel Door:  $98.95**

This blue anodized aluminum dust cap has DEF engraved into it and has two external O-rings that slide into the Diesel Exhaust Fluid fill neck. The cap can be attached to the original DEF cap tether.

Gloss Black

‘94-‘12  AS-6950GK - Fuel Door:  $98.95** ‘94-‘12  AS-6950GKL - LOCKING Fuel Door:  $98.95** ** NOTE: Installation on ‘13-‘18 trucks is more complicated than previous models. Instructions can be found on our website. Will not work on Mega Cab dually trucks, but will work on Regular and Crew Cab dually trucks. *NOTE: ‘10-‘12 fuel doors will not work on dual rear wheel trucks.

ALUMINUM GREEN LOCKING FUEL CAP, ‘13-up 

V

EXTERIOR PARTS & ACCESSORIES

Aluminum Fuel Doors

RAM 1500/2500/3500 GG-EZLC1:  $65.00  SALE $54.95

S  TANDARD ‘00-‘12 2500/3500 ‘08-’18 Cab/Chassis

LOCKING ‘00-‘12 2500/3500 ‘08-’18 Cab/Chassis

GATES_31838D: $9.95

GATES_31836D: $16.95

‘89-‘99 STANDARD

‘89-‘99 LOCKING

GATES_31615D: $9.95

GATES_31734D: $16.95

Green Fuel Caps (‘89-‘12)

The locking fuel caps are plastic with a stainless steel lock and key, the designs feature sturdy construction to meet Federal Fuel Safety Standards for fuel leakage. Locking gas caps include a quick on/off, quarter-turn, green locking gas cap and two keys. A standard fuel cap can be used with your truck’s plastic tether by drilling a 7/32” hole – then enlarging by hand to a 1/4” hole – in the top of the cap.

In 2013 the folks at Ram introduced a new fuel fill neck. The top of the neck is nonthreaded and this design made the traditional screw-in and locking fill cap obsolete. The new design is simply a flapper-on-a-spring. Ram responded to the market’s need for a fill cap by adding an 89¢ plastic plug. Outside vendors responded by making tethered and magnetic billet fuel caps. However, folks still wanted a locking fuel cap. Finally, TDR member Bob Woodward (hey, an ex-Cummins engineer) invented a locking fuel cap and we’re excited to help him bring this product to Turbo Diesel owners. This locking fuel cap is a simple design, a twist of the key lets you move the locking collar up to remove the fuel cap. Thanks Bob; Customers asked for it and you made it.

ALUMINUM LOCKING ‘DEF’ CAP, ‘13-up RAM 1500/2500/3500 GG-EZDEF1:  $49.00

‘13-‘18, “Cummins C” Chrome Emblem

‘15-‘18, “Cummins C” Black Emblem

MOPAR OEM emblem.

MOPAR OEM emblem.

68149701: $34.95

68276962: $37.95

The DEF-Loc is the locking/tamper-resistant DEF cap for Dodge Ram diesels. Locking up your DEF prevents unwanted matter from being put into your DEF tank. The DEF- Loc also features an EPDM U-Cup seal and also has a venting feature cut into the underside of the stainless steel Secure Screw head. Each DEF-Loc comes with the DEF-Loc cap and a fully machined stainless steel Secure Key. The locking DEF cap is not designed to work with the OEM tether.

ANODIZED BILLET ALUMINUM LOCKING FUEL CAP Ram 1500 EcoDiesel Emblem 68164914AA: $32.95

MOPAR OEM replacement emblem.

Catalog good through October 2018 l Prices subject to change without notice.

‘08-‘18, Ram 3500/4500/5500 Cab/Chassis ‘00-‘12, Ram 2500/3500 GG-EZCC4G:  $50.00

Heavy-duty anodized billet aluminum fuel cap. Each EZ-Loc comes with the EZ-Loc cap and a fully machined stainless steel Secure Key. The locking fuel cap is not designed to work with the OEM tether.

Order 770-886-2500 or genosgarage.com

l 51


EXTERIOR PARTS & ACCESSORIES

WEATHERSTRIPPING 1989-1993 FIRST GENERATION

1994-2002 SECOND GENERATION

Windshield Weatherstrip Seal with Trim Groove for Lock Strip This windshield seal goes first on the body then the glass is placed in the opening. A separate lockstrip (not included) inserts into the rubber and secures the glass in place. Made from ozone resistant EPDM rubber and from the same OE specs as the original for an authentic fit and finish.

Windshield Molding, ‘94-‘99 WCR-914 $49.95

Driver or Passenger Side Door Regular Cab, Extended Cab & Quad Cab (also fits ‘94-‘01, 1500)

Windshield Glass Seal Lockstrip This chrome lockstrip inserts into the weatherstrip to lock in the glass. Made from ozone resistant EPDM rubber and from the same OE specs as the original for an authentic fit and finish. For use with windshield seal WCR-914. Includes center clip/clamp. Does one application.

WLS-913/914-SP $19.95

This seal presses on the pinchweld lip on the body and fits either the driver or passenger doors. Made from the ozone resistant EPDM rubber and with the same OEM specs to install and fit for an authentic appearance. Kit does one door only. Order two kits to do both sides.

Driver or Passenger Side Door  V Regular or Extended Cab

(also fits ‘94-‘01, 1500) Seal presses on the pinchweld lip on the body and fits either the driver or passenger doors. Made from the ozone resistant EPDM rubber and the same OEM specs to install and fit for an authentic appearance.

Molding for windshields with 3 sides and welded corners. Fits 1500/2500/3500 trucks.

DWB-3110-78 $23.95

Kit does one door only. Order two kits to do both sides.

Quad Cab - Driver or Passenger Side Door Vertical Rear Door Seal V This door weatherstrip attaches with the preapplied clips to the vertical left rear side of the quad cab. It’s made from high quality ozone resistant EPDM rubber.

Driver and Passenger Side  V Glass Run Channel These beltlines mount with the pre-applied clips on the left & right doors to sweep the inside & outside of the glass. Made from the original specs and high quality ozone resistant materials to fit your vehicle.

WFK-3111-80 $79.95

Sold only as a kit.

Side Glass Run Channel

The glass run simply presses into the front, top & back section of the glass channel. A separate smaller run is installed inside the door in the back channel. This two-piece kit fits one side.

WFS-D1176-98A $14.95

REGULAR OR EXTENDED CAB DWB-3110-94 $29.95

QUAD CAB  V LEFT: DWL-3110-98 $35.95 RIGHT: DWR-3110-98 $35.95

DRIVER SIDE DWL-3120-98 $45.95

PASSENGER SIDE DWR-3120-98 $45.95

DRIVER SIDE

GRK-3110-94L $32.95

PASSENGER SIDE GRK-3110-94R $32.95

Rear Window Seal without Trim Groove for Lockstrip This rear window seal goes first on the glass and is installed using the rope-in method. It is a standard black gasket without trim groove. The seal is made from the original specs and from high quality ozone resistant materials. Will not work with OEM sliding windows.

WBL-1129 $46.95

WCR-1129 $46.95

WLS-1129-C $46.95

2003-2009 THIRD GENERATION

PRP-0002 $9.95

Fits: ‘03-‘09, 2500/3500 ‘08-‘10, 4500/5500 ‘02-‘08, 1500

Side Glass Run Channel Lockstrip Molding Center Joint Clamp This center joint is made from myler chrome and covers the seam where the two ends meet. Made from the OEM specs to install and fit for an authentic appearance. 1 required per vehicle.

52 l Ram Turbo Diesel Parts & Accessories  #101

WBL-DB8791 $44.95

Hood to Cowl Seal

Lockstrip Insert Tool It is specifically designed for self-sealing twopiece rubber weatherstripping. The eye of the tool threads locking strip into the groove and inserts it into the channel. For use with rear window seal WCR-1129.

WFK-3110-94 $46.95

Rear Window Seal without Trim Groove for Lockstrip

(also fits ‘94-‘97, 1500) This rear window seal fits the R-series models. This application goes first on the glass and is installed using the rope-in method. Made from ozone resistant EPDM rubber and from the same OE specs as the original for an authentic fit and finish Will not work with OEM sliding windows.

Glass Seal Lockstrip This chrome lockstrip inserts into the weatherstrip to lock in the glass for the rear window. It’s sold as a single piece to do one application. Our product is made from the original specs and high quality ozone resistant materials. For use with rear window seal WCR-1129.

These beltlines mount with the pre-applied clips on the left & right doors to sweep the inside & outside of the glass. Made from the original specs and high quality ozone resistant materials to fit your truck. Sold only as a kit.

Rear Window Seal with Trim Groove for Lockstrip This rear window seal goes first on the body then the glass is placed in the opening. A separate lockstrip (not included) inserts into the rubber and secures the glass in place. Made from ozone resistant EPDM rubber and conforms to the original OEM specs to fit your vehicle.

Driver and Passenger Side  V Window Beltline Seal Kit

LJC-914-C $1.95

The glass run simply presses into the front, top & back section of the glass channel. A separate smaller run is installed inside the door in the back channel. This two-piece kit fits one side.

CS-3110-02 $9.95

DRIVER SIDE

GRK-3110-94L $32.95

PASSENGER SIDE GRK-3110-94R $32.95

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


2” Hub Mudflaps Matte Black/Stainless Steel ROCKTAMERS-00108:  $279.00

Wheel Simulators

ROCK TAMERS™ are the premiere “Adjustable and Removable” Mudflap System designed to provide the ultimate protection for your towables from damage caused by rocks and road debris. They are the perfect solution for consumers who want the utility aspect of mudflaps and want to maintain their vehicle’s stylish and attractive appearance This mud flap system is easy to attach or remove from any standard 2” ball mount. The overall width is adjustable and easily fine-tuned to fit any Dodge Ram truck. The mudflap height is adjustable to maintain consistent ground clearance when towing various loads.

HUSKY LINER MUD GUARDS ‘10-‘18

‘03-‘14, 3500 DRW UniLiner 17” Front & Rear ‘Under-The-Lug’ Mounting WHEEL-SLD-1703:  $275.00

PART#

FRONT 2500/3500  without OEM Fender Flares

SG-DG-58171: $39.95

FRONT 2500/3500  with OEM Fender Flares

SG-DG-58181: $39.95

‘03-‘09

FRONT 2500/3500

SG-DG-56071: $39.95

FRONT 2500/3500

SG-DG-56001: $39.95

‘10-‘18 ‘06-‘09 ‘03-‘09

‘94-‘02

REAR SRW  2500/3500  without OEM Fender Flares

SG-DG-57151: $39.95

REAR SRW  2500/3500  with OEM Fender Flares

SG-DG-57161: $39.95

REAR DRW  3500  without OEM Fender Flares

SG-DG-57181: $79.95

REAR DRW  3500  with OEM Fender Flares

SG-DG-57191: $79.95

REAR DRW  3500  MEGA CAB without OEM Fender Flares

SG-DG-57121: $79.95

REAR SRW  2500/3500  without OEM Fender Flares

SG-DG-57061: $39.95

REAR DRW  3500  REGULAR/QUAD CAB without OEM Fender Flares

SG-DG-57071: $79.95

REAR SRW  2500

SG-DG-56001: $39.95

REAR DRW  3500

SG-DG-57051: $79.95

FRONT & REAR Mud Guards (‘94-‘18) 2500/3500

NOTE: These Husky Liner mud guards (Front and Rear) are custom-molded to fit the contour of the truck’s wheel well. They are pre-drilled and the holes line up with existing factory screw/trim hole locations. However, they do not extend as far below the bodywork as the Mopar splash guards.

MOPAR SPLASH GUARDS ‘10-‘18

‘10-‘18

‘10-‘18

‘94-‘98, 3500 DRW DOT Liner 16” Front & Rear ‘Over-The-Lug’ Mounting WHEEL-GD-816:  $224.00

These polished stainless steel center hubcovers complete the look of expensive aluminum wheels at a fraction of the cost. A protective rolled edge gives them strength and safety. Secure bolt-on installation means you won’t lose them because of a bump in the road.

‘94-‘02 ‘10-‘18

‘99-‘02, 3500 DRW DOT Liner 16” Front & Rear ‘Over-The-Lug’ Mounting WHEEL-ND-20:  $275.00

EXTERIOR PARTS & ACCESSORIES

F RE E

SHIPPING!

FRONT 2500/3500 with OEM Fender Flares  (DELUXE MOLDED PLASTIC)

PART# SG-DG-82214137: $45.95/pair

FRONT 2500/3500 without OEM Fender Flares  (DELUXE MOLDED PLASTIC)

SG-DG-82212287AC: $54.95/pair

FRONT 2500/3500 with OEM Fender Flares  (HEAVY-DUTY RUBBER)

SG-DG-82215779AB: $48.95/pair

FRONT 2500/3500 without OEM Fender Flares  (HEAVY-DUTY RUBBER)

SG-DG-82212288: $51.95/pair

REAR SRW  2500/3500 with OEM Fender Flares  (DELUXE MOLDED PLASTIC)

SG-DG-82214136: $45.95/pair

REAR SRW  2500/3500 without OEM Fender Flares  (DELUXE MOLDED PLASTIC)

SG-DG-82211228: $53.95/pair

REAR SRW  2500/3500 with OEM Fender Flares  (HEAVY-DUTY RUBBER)

SG-DG-82212289: $54.95/pair

REAR SRW  2500/3500 without OEM Fender Flares  (HEAVY-DUTY RUBBER)

SG-DG-82212290: $54.95/pair

‘10-‘18

REAR DRW  3500 with or without OEM Fender Flares  (HEAVY-DUTY RUBBER)

SG-DG-82212073AC: $67.95/pair

‘03-‘09

REAR SRW  2500/3500  (DELUXE MOLDED PLASTIC)

Catalog good through October 2018 l Prices subject to change without notice.

FRONT Heavy-Duty Rubber (‘10-‘18) 2500/3500

SG-DG-82207241: $49.95/pair

REAR Deluxe Molded Plastic (‘10-‘18) 2500/3500

EZ Install Order 770-886-2500 or genosgarage.com

l 53


TOWING ACCESSORIES

‘Rapid Hitch’ Towing Hitch

Ram 2500/3500 Air Bag Kit

(up to 6” drop) COMPLETE HITCHES

2-1/2” Receiver Hitch with Greaseless Alumiball Combo Ball (10,000/12,500 lb. GTWR; 1,500 lb. tongue) RAPIDHITCH-3405-25: $229.99

3405-25

2-1/2” Receiver Hitch with Plated Steel Combo Ball (10,000/12,500 lb. GTWR; 1,500 lb. tongue) RAPIDHITCH-3410-25: $209.99 2” Receiver Hitch with Greaseless Alumiball Combo Ball (6,000/8,000 lb. GTWR; 1,500 lb. tongue) RAPIDHITCH-3405: $199.99 2” Receiver Hitch with Plated Steel Combo Ball (8,000/10,000 lb. GTWR; 1,500 lb. tongue) RAPIDHITCH-3410: $179.99

RAM 2500/3500 Air Bag Kits

3410

The Rapid Hitch tow bar system is the perfect hitch for anyone who tows multiple trailers. You can flip the double ball over, change the drop to a rise, or adjust the height of the drop all by simply removing the hitch pin and putting it back in place. With the easy height adjustment you can make sure you are keeping your trailer level. With the 2” and 2-5/16” ball combo, you cover most trailers on the road today. The 1-7/8” ball is available individually if desired. The various balls are easily changed by removing a hidden pin which attaches the ball to the ball housing. The Rapid Hitch is made of an aluminum super alloy that will NEVER RUST!

‘14-‘18, 2500 (2WD/4WD) HP10206:  $315.00

‘14-‘18, 3500 (4WD) ‘03-‘13, 2500/3500 (4WD) HP10002:  $315.00

‘14-‘18, 3500 (2WD) ‘03-‘13, 2500/3500 (2WD) HP10089:  $305.00

‘89-‘02, 2500/3500 (2WD/4WD) HP10019:  $315.00

AXLE BREATHER RELOCATION KIT ‘07-‘09, RAM 3500 (Cab/Chassis) HP10136:  $13.50

Pacbrake’s air springs allow you to level out your truck’s stance for any towing/hauling situation. The product’s design gives you the ability to adjust the amount of air in each spring. The standard manual fill kit gives you easily accessible fill valves located near the rear license plate on your truck. It is important to note that by installing an air suspension kit, the max load capacity (GVWR) does not increase. NOTE: Even though we have rarely seen this, some vehicles equipped with 5th wheel hitches require brackets to be mounted to the frame in the same locations as the air spring brackets (if this is the case, modifications of the 5th wheel hitch brackets may be required to mount this kit).

The aluminum Alumiball Combo Ball option is light and surprisingly strong. It only weighs 15 lbs. with the greaseless ball option making it easy to handle and adjust. If you choose the Plated Steel Combo Ball, it is V5 certified with a strength rating of 10,000 lbs. and 1,500 tongue weight with the 2-5/16” steel ball.

BALL ASSEMBLY ONLY 1-7/8” Greaseless Single AlumiBall (3,500 lbs. towing capacity) RAPIDHITCH-3452:  $36.99 1-7/8” Single Ball (Plated) (7,500 lbs. towing capacity) RAPIDHITCH-3426:  $36.99

Trailer-Aid® PLUS TRAILER-AID:  $49.00

Trailer-Aid PLUS allows you to change a tandem axle trailer flat without the inconvenience of jacking up the trailer. Simply drive the good tire/wheel onto the Trailer-Aid and the height of the axle will be sufficient to change the bad tire.

2” × 2-5/16” Combo Ball (Plated) (8,000- 10,500 lbs. towing capacity) RAPIDHITCH-3424:  $49.99

2-PIN LOCK KIT Locking Ball Pin Kit (1 for adjuster; 1 for receiver) RAPIDHITCH-3492:  $37.99

54 l Ram Turbo Diesel Parts & Accessories  #101

7-Spade RV Connector Maintenance Kit IPA-8028:  $36.95

The IPA-8028 kit cleans both the male and female sides of the 7-spade harness. The kit’s circuit tester has LED lights that show that the connection at the pin is good, giving you confidence to troubleshoot wiring or light bulbs on the trailer.

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


APPLICATION **Mirrors for 2010-newer coming soon.**

*Check the back of the mirror for mount type before ordering. Glass fits OEM mirrors only.* Not all styles of mirrors are available. APPLICATION

PART# LEFT KVDG42L

Manual

PART#

LEFT KVDG42EL

$10.95

RIGHT DRM56270

‘08-‘10

4500/5500

$23.95

Electric

2500/3500

LEFT DRM56324

‘02-‘08 1500

$28.95

RIGHT DRM56323

Manual Towing

NOTE: Attaches with 3 metal prongs.

‘05-‘09, TOWING • Manual NOTE: Attaches with 3 metal prongs.

Electric Towing

LEFT DRM56276

• Heated

$51.95

NOTE: Attaches with round spring band.

Manual

LEFT DRM56242

RIGHT KVDG44R LEFT KVDG44EL

$179.95

RIGHT KVDG44ER

$46.95

RIGHT KVDG33R

$46.95

$43.95

‘98-‘02

RIGHT DRM56243

2500/3500

‘98-‘01

$43.95

Electric • Heated

1500

• Heated NOTE: Mirror support brackets included.

$23.95

RIGHT DRM56241

‘94-‘02

Manual Towing

‘94-‘01

NOTE: Mirror support brackets included.

2500/3500

LEFT DRM56272

1500

$52.95

LEFT KVDG33EL

$55.95

RIGHT KVDG33ER

$55.95

Electric Towing

RIGHT DRM56273

$52.95

Manual

• Chrome

LEFT DRM56274 ‘03-‘04, SPORT • Heated

$119.95

LEFT KVDG33L

$50.95

$31.95

‘03-‘05, TOWING • Heated

LEFT KVDG44L

$179.95

RIGHT DRM56277

LEFT DRM56240 ‘03-‘06, SPORT • Non-Heated

RIGHT KVDG42ER

$119.95

$30.95

‘05-‘09, TOWING • Heated

$69.95 $69.95

‘03-‘09

‘05-‘09, SPORT • Heated

RIGHT KVDG42R

$49.95

LEFT DRM56271 ‘07-‘09, SPORT • Manual

$49.95

TOWING & REPLACEMENT MIRRORS

STOCK REPLACEMENT SIDE VIEW MIRRORS

Stock Replacement Mirror Glass Assemblies

LEFT KVDG49EL

$140.95

RIGHT KVDG49ER

$140.95

LEFT KVDG49L

$106.95

RIGHT KVDG49R

$106.95

LEFT KVDG13L

$46.95

RIGHT KVDG13R

$46.95

$32.95

RIGHT DRM56275

‘94-‘97

2500/3500 1500

$34.95

Electric

• Chrome

LEFT KVDG30EL

$58.95

RIGHT KVDG30ER

$58.95

LEFT DRM56216 ‘98-‘02, SPORT • Heated

$25.95

RIGHT DRM56217

$23.95

$31.95

Mirror support brackets included.

RIGHT KVDG66ER

Manual

• Chrome

$23.95

RIGHT DRM56257

LEFT KVDG66EL

$144.95 $144.95

LEFT KVDG68L

LEFT DRM56256 ‘98-‘02, SPORT • Non-Heated

Electric Towing

Electric

Catalog good through October 2018 l Prices subject to change without notice.

RIGHT KVDG68R

$96.95

‘89-‘93

350/250/150

* Modifications require purchase of Brite Box ‘Sport’ Headlight Conversion for either ‘94-‘98 or ‘99-‘02 truck.

$96.95

• Chrome

LEFT KVDG69EL

$106.95

RIGHT KVDG69ER

$106.95

Order 770-886-2500 or genosgarage.com

l 55


HEADLIGHTS • TAIL LIGHTS • FOG LIGHTS

MOPAR OEM REPLACEMENT HEADLIGHTS

‘10-‘12, 2500/3500 ‘09-‘12, 1500 Single Headlight

‘12-‘18, 2500/3500 For trucks built after 7/23/12.

‘13-‘18, 1500 Quad Headlights

‘10-‘12, 2500/3500 For trucks built up to 7/23/12.

‘09-‘12, 1500 Quad Headlights

LEFT 55277409AF $235.00 RIGHT 55277410AF $235.00 LEFT 68096439AG $179.95 RIGHT 68096438AG $179.95 LEFT 68001485AH $242.00 RIGHT 68001484AH $242.00

Brite Box  The Brite Box module plugs right into your Dodge Ram’s existing wiring harness and allows simultaneous operation of the high and low beams without placing any additional loads on the vehicle’s stock headlight switches or wiring. The Brite Box goes in-series to your existing wiring harness. Unplug the harness from the light (passenger side light is easiest to access) and plug it into the Brite Box. Take the pigtail plug from Brite Box and plug into the light. For those truck owners who want the high beams, low beams AND fog lights to be illuminated, you will need to purchase the Brite Box model for your truck that has Fog Light Control (FLC). Fogster  As you know, the lighting system will turn the fog lights off when the high beams are activated. The FOGSTER will keep the fog lights illuminated with the high beams on. Fogster-SD8 works with ‘06-‘09 trucks with factory fog lights; Fogster-SD7 works with ‘03-‘05 trucks. NOTE: This is a single unit.

Bulbzilla  Allows you to upgrade to a 9005 light bulb (1700 lumens each) in the

DEPO REPLACEMENT HEADLIGHTS ‘13-‘18, 1500/2500/3500 Halogen Projector w/Chrome Projector Ring

‘13-‘14, 1500/2500/3500 Halogen Projector w/Black Bezel and Chrome Projector Ring

‘07-‘09, 2500/3500

‘06, 2500/3500

‘03-‘05, 2500/3500

‘99-‘02, 2500/3500 w/Sport Package * Will not work on non-Sport trucks without modifications.

‘94-‘02, 2500/3500 Single bulb

‘89-‘93, 2500/3500

LEFT REPD-100168 $375.00 RIGHT REPD-100167 $375.00 LEFT DEP-3341137L-AS2 $275.00 RIGHT DEP-3341137R-AS2 $275.00 LEFT DEP-3341122L $85.00 RIGHT DEP-3341122R $85.00

fog lamp socket that is sized for a 9006 (1000 lumens each) bulb and increase light output by 70%.

‘94-‘02 “Sport” Headlight Conversion  H TDR77, p106-107 Second Generation truck owners have read about converting the stock single bulb (high and low filament) to a dual bulb “Sport” arrangement that Dodge offered in Sport models from ‘99-‘02. TDR 77, pages 106-107 has the details on the conversion. For wiring purposes you need a Brite Box “Sport” Headlight Conversion and the headlights from DEPO (‘99-‘02 with Sport Package). The Brite Box Headlight Conversion converts the stock ‘94-‘02 single bulb headlight to the ‘99-‘02 Sport two bulb headlight. APPLICATION Brite Box (‘06-‘09)

BB-SDK8: $209.99

Brite Box (‘06-‘09)

BB-SDK8-FLC-6: $249.99

Brite Box (‘03-‘05)

BB-SDK7: $209.99

Brite Box (‘03-‘05)

BB-SDK7-FLC-6: $249.99

with Fog Light Control

LEFT DEP-3341115L $95.00

with Fog Light Control

Brite Box (‘99-‘02)

BB-7B: $94.99

RIGHT DEP-3341115R $95.00

Brite Box (‘99-‘02)

BB-7B-FLC-U: $119.99

LEFT DEP-3341108L $115.00

Brite Box (‘99-‘02) without Sport Package

BB-4B: $94.99

Brite Box (‘99-‘02)

BB-4B-FLC-U: $119.99

Brite Box (‘94-‘98)

BB-4: $94.99

Brite Box (‘94-‘98)

BB-4-FLC-U: $119.99

Brite Box (‘89-‘93)

BB-4L: $94.99

Brite Box (‘89-‘93) with Fog Light Control

BB-4L-FLC-U: $119.99

Fogster (‘06-‘09)

BB-FOG-SD8-6: $109.99

Fogster (‘03-‘05)

BB-FOG-SD7-6: $109.99

RIGHT DEP-3341108R $115.00 LEFT DEP-3341102L $105.00 RIGHT DEP-3341102R $105.00 LEFT DEP-3331104L $85.00 RIGHT DEP-3331104R $85.00

LEFT or RIGHT DEP-PH105 $35.95

with Sport Package

with Sport Package and Fog Light Control

without Sport Package and with Fog Light Control

with Fog Light Control

Brite Box ‘Sport’ Headlight Conversion without Fog Light Control

Read about the headlight conversion in our ‘Tech Information’: genosgarage.com/downloads/TechPDF/TDR77_HeadlightConversion.pdf

Brite Box ‘Sport’ Headlight Conversion with Fog Light Control

‘94-‘98

BB-4274: $149.99

‘99-‘02

BB-4274B: $149.99

‘94-‘98

BB-4274-FLC-U: $178.99

‘99-‘02

BB-4274B-FLC-U: $178.99

Bulbzilla (‘03-‘09)

56 l Ram Turbo Diesel Parts & Accessories  #101

PART#

BB-BFH-6-5: $20.99

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


REPLACEMENT TAIL LIGHTS

‘13-‘18, Ram 1500

LEFT DEP-3342020L: $39.95 RIGHT DEP-3342020R: $39.95

‘10-‘18, 2500/3500

LEFT DEP-3342015L: $29.95 RIGHT DEP-3342015R: $29.95

‘03-‘09, 2500/3500

LEFT DEP-3342009L: $44.00 RIGHT DEP-3342009R: $44.00

‘99-‘02, 2500/3500 w/o Sport Package

‘99-‘02, 2500/3500 w/Sport Package

‘94-‘98, 2500/3500

MOPAR ‘03-‘09

Replacement plastic lense nuts included with purchase.

PLASTIC LENSE NUT, ‘03-‘09 Cab light lense 55077559AD for ‘03-‘09 trucks is the new updated style lamp with updated lense and gasket. You will need two of these plastic nuts per lense when replacing an older style lense with a foam gasket. Some trucks built after May 2006 may already have the updated lenses and plastic nuts.

MOPAR ‘10-‘18, 2500/3500 ‘09-‘18, 1500 Non-LED lights.

LEFT 55277415AE: $72.00 RIGHT 55277414AF: $72.95

DEPO ‘07-‘09, 2500/3500

LEFT DEP-3341916L: $33.00 RIGHT DEP-3341916R: $33.00

DEPO ‘03-‘06, 2500/3500

LEFT DEP-3341906L: $39.00 RIGHT DEP-3341906R: $39.00

LEFT DEP-3342011L: $28.00 RIGHT DEP-3342011R: $28.00 LEFT or RIGHT DEP-3342010: $46.00 LEFT DEP-3342005L: $28.00 RIGHT DEP-3342005R: $28.00

MOPAR OEM REPLACEMENT CAB LIGHT LENSES MOPAR ‘10-‘18

HEADLIGHTS • TAIL LIGHTS • FOG LIGHTS

DEPO REPLACEMENT FOG LIGHTS

See page 52 for ‘03-‘06 replacement tail light circuit strip.

DEPO ‘94-‘02, 2500/3500 w/Black Frame

LEFT DEP-3331909L: $46.00 RIGHT DEP-3331909R: $46.00

DEPO ‘89-‘93, 2500/3500

LEFT DEP-3331902L: $36.00 RIGHT DEP-3331902R: $36.00

68261677 $14.95 55077559 $18.95

J4000141 $1.00 each

MOPAR ‘99-‘02

55077067 $33.95

REPLACEMENT TAILGATE LAMPS

MOPAR ‘94-‘98

55054894 $25.95

55277299AB: $47.95

MOPAR ‘89-‘93

3738011 $14.50

MOPAR ‘06-‘16, 3500 DRW Complete lamp assembly. Includes bulbs. DORMAN ‘06-‘16, 3500 DRW Complete lamp assembly. Includes bulbs.

NEW! DRM923025: $39.95

MOPAR ‘03-‘09, 2500/3500

5072594: $122.95

MOPAR ‘03-‘06, 3500 DRW With 8 ft. bed. Lense only.

5086509AA: $112.95

REPLACEMENT SIDE MARKERS & TURN SIGNALS MOPAR ‘Fender Clearance Lamp 10-‘18, 3500 DRW Fender Clearance Lamp Bulb included.

DORMAN ‘03-‘09, 3500 DRW Red Fender Clearance Lamp Bulb included.

MOPAR ‘03-‘09, 3500 DRW Fender Clearance Lamp Bulb included.

MOPAR ‘94-‘02, 3500 DRW Fender Clearance Lamp Bulb included.

DEPO ‘91-‘93

Turn Signal/Parking Light Assembly

DEPO ‘89-‘93

Side Marker Assembly

RED 68042140AA: $42.95 AMBER 68042143AA: $42.95 NEW! LEFT or RIGHT DRM68204: $34.95 RED 55077458AA: $44.95 AMBER 55077459AA: $44.95 RED 55054956: $55.95 AMBER 55054958: $57.95 LEFT DEP-3331605L: $19.00 RIGHT DEP-3331605R: $19.00 LEFT or RIGHT DEP-3341401N: $6.00

Catalog good through October 2018 l Prices subject to change without notice.

MOPAR ‘94-‘02, 2500/3500 *This part is on long-term backorder.

MOPAR ‘94-‘02, 2500/3500

MOPAR ‘94-‘02, 2500/3500 Frame only.

MOPAR ‘94-‘02, 2500/3500 For tailgate lampbar. Will also fit ‘94-‘02 Dually fender.

Roof Mounted with Cargo Light

55077263: $89.95 Roof Mounted without Cargo Light

55077262AB: $96.95

Tailgate Lampbar 55054823: $41.95

55054819: $21.95

Order 770-886-2500 or genosgarage.com

l 57


SERVICE & OWNER’S MANUALS

RAM TRUCK Factory Service Manuals

Owner’s Manuals (‘89-‘04) If the Owner’s Manual for your Dodge Ram Turbo Diesel truck is missing or has seen better days, you can affordably replace it. YEAR & APPLICATION

PART#

One of our best selling items is the Haynes Repair Manual for the Dodge Ram pickups. The staff likens this manual to the “Cliff Notes” used by students in lieu of reading the entire book. However, there are times when you need the detail of the Dodge Factory Service Manual (yes, the same one you can order out of the back of your Owner’s Manual). The factory service manual CD is the authoritative source for specifications, reuse, wiring, and diagnostics. Every Dodge Turbo Diesel owner who does their own maintenance should have the factory manual. YEAR / PN

PRINT

CD

Haynes Repair Manuals These manuals cover the 5.9L and 6.7L engines.

Written for the Do-It-Yourselfer, good enough for the pros! These Haynes manuals cover Dodge pickups (2WD, 4WD, 1500, 2500, 3500) from ‘94-‘16 including the Turbo Diesel. The books are soft bound and available at one-fifth the cost of the factory manual. Everyone should own one for quick and easy reference.

*For service manuals for trucks newer than the ‘03 year model, there is only one source: www.techauthority.com

58 l Ram Turbo Diesel Parts & Accessories  #101

‘09-‘16, 2500 & 3500 ‘09-‘16, 1500 BOOK-30043:  $24.95

‘03-‘08, 2500 & 3500 ‘02-‘08, 1500 BOOK-30042:  $24.95

‘94-‘02, 2500 & 3500 ‘94-‘01, 1500 BOOK-30041:  $24.95

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


1-1/2” Needle Nose Grease Gun Adapter  Used for greasing the front axle Cardan Joint at the transfer case.

Throttle Pedal Depressor  Perfect for cold weather truck warm-up, the tool holds throttle at a constant rpm. Engage the nylon hook under the steering wheel. Then extend the depressor rod to the accelerator pedal. Use the adjustment screw to fine-tune the rpm level. Tool is 40” in overall length.

Telescoping Magnetic Pocket Pick Up  Adjustable telescoping action will extend from 4-1/2” to 16-1/4”. Super strong neodymium magnet picks up all ferrous metal objects up to 2 lbs.

$12.95

KTI73903

$5.95

LC48700

$21.95

ULL15X-DISP

$4.95

GG-TAPKIT

NPT Tap Kit  This NPT Tap Kit includes a 5/16” drill bit and a 1/8 NPT tap.

$6.00

Micro-V Heavy Duty Strap Wrench  Originally developed to grasp and hold automotive belt driven pulleys such as fan clutch pulleys, but will also help hold other items as well. Made with a heavy duty aluminum handle and highly durable composite locking head. Strong nylon belt. Dogbone Fuel Filter Cap Combo Wrench & WIF Sensor Wrench (‘13-‘18, 6.7L)  As the description reads, this nifty tool is a “2fer.” The curved end gives you extra leverage and clearance on the hard-to-reach fuel filter cap. The straight end fits over the WIF sensor on the chassis-mounted fuel filter. Billet Aluminum Oil Filter Removal Tool (‘89-‘18, 5.9L & 6.7L)  Use this tool to remove the oil filter on Ram Cummins Turbo Diesel trucks. Use a 19mm/3/4” socket or wrench. Fits 93mm filters with 15 flutes (LF3972 and LF16035). Billet Aluminum Oil Filter Removal Tool/Plug (‘13-‘18, 6.7L)  Screw this tool into the top of the oil filter to keep oil from spilling when removing the filter through the fender well. End Cap Oil Filter Wrench  Cup design allows easy filter removal and installation from the end of LF16035 and LF3972 oil filters, even in tight locations. Use with 3/8” square drive. Important: match fluted end of the oil filter with the filter wrench to ensure you have the proper wrench size.  (NOTE: Ratchet is not included.)

NEW! GATES-910131

$32.95

GG-DB1

$14.95

LT-93MM-SOCKET

$59.95

LT-OFC-TOOL

$29.95

LC61580

$6.95

‘Big Range’ Oil Filter Strap Wrench  Adjusts quickly to remove spin-on oil or fuel filters up to 6” in diameter. Use with 1/2” or 3/4” wrench. Strong nylon belt.

LC63500

Oil Filter Plug (‘13-‘18)  Used to plug the oil filter when changing oil on ‘13-‘18 Ram Cummins 2500/3500 Heavy Duty trucks. Threads into the filter for a secure seal so the filter can be removed or installed without spilling oil.

LC57180

Ram 1500 EcoDiesel 27mm Low Profile Oil Filter Cap Socket (‘14-‘18, 3.0L) Helps remove and install oil filters on ‘14-‘17 Ram 1500 EcoDiesel trucks.

LC13320

$6.95

$12.95

$6.95

Ram 1500 EcoDiesel Fuel Filter Removal Tool (‘14-‘18, 3.0L)  The wrench fits snugly on the bottom of the fuel filter canister and grabs the four tabs on the outside of it. The drain valve is installed after the first filter removal and drains all of the fuel so you won’t have fuel running down your arm when you take the canister down. Ram 1500 EcoDiesel C3M Fuel Filter Removal Tool (‘14-‘18, 3.0L)  Similar to our American-made, billet aluminum tool (LT-ECO-FUEL-TOOL). This tool is made from our proprietary process, C 3M (cheap Chinese cast metal). All joking aside, it is inexpensive, but it works. It even has a sporty/fast/sleek/racy orange color.

NEW!

THX312

LT-ECO-FUEL-TOOL

$59.95

C3M-ECO-FUEL-TOOL

$24.95

28mm Nut Grabber (‘10-‘18, 6.7L)  Are you tired of busted nuts? Try our new no-slip 28mm fuel filter cap socket which has no slop in the socket-to-plastic raised hex. 3/8” drive, 6-point socket. Black hard-annodized for durabililty. Made in the U.S.A.

NEW! GG-SOCKET28

Fuel Filter Socket, 29mm (‘00-‘07, 5.9L)  Helps remove and install fuel filters on ‘00-‘07, 5.9L Cummins engines. Use the low profile, 3/8” drive, 29mm socket on the raised hex on the fuel filter housing.

LC14600

Fuel Filter Socket, 28mm (‘10-‘18, 6.7L)  Helps remove and install fuel filters on ‘10-‘18, 6.7L Cummins engines. Use the 1/2” drive, 28mm socket on the raised hex on the fuel filter housing.

TOOL-KTI28128

Catalog good through October 2018 l Prices subject to change without notice.

SPECIALTY TOOL BIN

Plug-All Vacuum & Fuel Stoppers  An assortment of plugs and caps. Plugs fit 1/8”, 3/16”, 1/4”, 5/16”, 3/8” and 1/2” hoses. Tapered caps close tubes from 1/8” to 1/2”.

$15.95

$6.95

$7.95

Order 770-886-2500 or genosgarage.com

l 59


SPECIALTY TOOL BIN

DEF Tester  Had a bottle of Diesel Exhaust Fluid sitting around for awhile? Nervous about putting it in your truck’s DEF tank? Check it first with this handy DEF tester.

THX108 $18.25

Threaded Super Funnel  Perfect for hands-free filling on threaded valve cover openings. This two-piece funnel can be used separately or threaded together for a long super funnel. The larger section screws into threaded oil filler openings found on many Dodge Ram trucks, holding the funnel upright for quick, mess free oil fills.

LC19802 $4.95

Jay’s EZ Funnel  This multi-use funnel is perfect for all applications. Replace the lubricant cap with Jay’s EZ Funnel. Dispense the liquid using only Jay’s EZ Funnel or attach the flex tubing for hard to reach places. Place Jay’s EZ Funnel into the lubrication port (orifice). Gently squeeze the bottle to dispense the lubricant. When you have dispensed the desired amount of liquid, simply stop squeezing the bottle. The lubricant will retract.

JAYS-EZ-FUNNEL $8.95

17mm Allen-Head Tool  For NV5600 Transmission Fill Plug Removal.

17MM_TOOL

14mm Allen-Head Tool  For G56 Transmission Fill Plug Removal.

14MM_TOOL

6.7L Turbocharger Removal Wrench (‘07.5-‘18)  A 15mm x 1/2” drive wrench made specifically for removing the turbocharger in ‘07.5-current 6.7L Ram Cummins Turbo Diesel trucks. SCHLEY Flare Nut Wrench - 24mm  The 24mm flare nut wrench is designed to fit into the confined area of the Cummins cylinder head and hold the 24mm fuel line flare nut while the 19mm fuel coupler nut is loosened. For use with ‘03-‘17 HPCR engines.

$8.95 $8.95

GG-TURBOWR15

$12.95

SCH66150

$44.95

SCHLEY Injection Pump and Idle Lock Nut Wrench - 10mm (‘89-‘98, 12V)  This offest wrench is designed to remove and install the 10mm injection pump mounting bolts and idle lock nuts found on the 5.9L engines.

SCH89150

SCHLEY Injection Pump and Idle Lock Nut Wrench - 13mm (‘89-‘98, 12V)  This offest wrench is designed to remove and install the 13mm injection pump mounting bolts and idle lock nuts found on the 5.9L engines.

SCH89100

Fuel Injection Flare Nut Socket (3/4”)  The area surrounding the injection pumps on ‘94-‘17, 5.9L and 6.7L engines is very difficult to access when removing the fuel supply lines. This tool is designed with a slim configuration and 3/8” drive to fit into this confined area. Tork Tool Injection Pump Gear Puller (VE, P7100, VP44, CP3)  Removing the gear from a Cummins VE, P7100, VP44 or CP3 injection pump requires a specialized tool and this tool from Tork Tool works great. Don’t risk damaging the pump by using a pry bar or similar tool. Tork Tool Injection Pump Gear Puller (VE, P7100, VP44)  Removing the gear from a Cummins VE, P7100, or VP44 injection pump requires a specialized tool and this tool from Tork Tool works great. Don’t risk damaging the pump by using a pry bar or similar tool. Tork Tool Injector Puller (‘89-‘98, 12V)  Pulls Cummins injectors fast! This heavy-duty tool was designed to remove Cummins 6BT and 4BT injectors without damaging the injector ball or indent groove in the head. This tool will remove even the most rusted injector. Tork Tool Injector Puller (‘98-‘02, 24V)  This heavy-duty tool was designed to make injector changing on a Cummins engine a simple project. The CIP040 features a thick wall tube and a custom washer that is machined to center on the tube. This automatically centers the tool over the injector body.

$27.95

$27.95

SCH99100

$36.95

CGP020

$37.95

CGP010

$24.95

CIP030

$23.45

CIP040

$37.95

Tork Tool Injector Crossover Tube Puller (‘98.5-‘02, 5.9L)  This tool is made to be used on ‘98.5-‘02 Dodge Cummins Turbo Diesel trucks to make pulling the crossover tube an easier job.

24VCTR010

Tork Tool Common Rail Crossover Tube Remover (‘03-‘18, 5.9L & 6.7L)  This tool is designed to be used on ‘03-‘16 Dodge Cummins Turbo Diesel trucks to make pulling the common rail connector tube an easier job.

CRCTR010

$17.95

$18.49

Fuel Rail Pressure Test Cap (‘07.5-‘18, 6.7L)  Use this tool to block off fuel injector lines at the injection rail to help isolate a leaking or faulty fuel injector.

LT-TESTCA2

Fuel Rail Pressure Test Cap (‘03-‘07, 5.9L)  Use this tool to block off fuel injector lines at the injection rail to help isolate a leaking or faulty fuel injector.

LT-TESTCA

60 l Ram Turbo Diesel Parts & Accessories  #101

$19.95

$19.95

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


Tork Tool 24-Valve Spring Compressor  The Cummins Valve Spring Compressor features a tapered design that reduces the chance of losing a valve keeper. Included in the Tork Teknology kit are hex head bolts for the bridge, custom machined bridge, compressor plate, washer, flange nut and detailed instructions. Tork Tool 12-Valve Spring Compressor  Compress two valve springs at one time with this Cummins 12-valve spring compressor. This tool features tapered cones on the top plate which makes installation of the keepers super easy. You simply adjust the height of the plate, place a keeper on the ramp, and slide the keeper onto the valve stem. Valve Spring Compressor  For the Turbo Diesel 12-valve owners who need to change out the exhaust valve springs to the heavy-duty spring used with exhaust brakes, this is the tool! Unlike other turn-to-compress tools, the Lisle 16750 makes compressing the spring as easy as lifting the cam lever. For cylinders #5 and #6, you replace the cam handle with a bolt, and turn it with a socket. Flat Band Hose Clamp  This tool removes and installs flat band hose clamps used on heater and radiator hoses. Tips screw in and out to fit all clamp sizes. Ratcheting lock mechanism holds the clamp in an open position for each removal and installation. Tips can be switched to accommodate different applications. Offset jaws allow access in hard-to-reach areas.

GG-FPRKIT

44.95

CVSC010

$84.95

CVSC020

$43.95

LC16750

$26.95

LC17100

$20.95

Scissor Disconnect Tool (3/4”, 5/8”, 1/2”, 3/8” Lines)  Disconnnect tool for metal lines used on air conditioning lines with spring lock connectors. It makes disconnecting the lines a quick and easy job.

LC63730

Scissor Disconnect Tool (5/16” and 3/8” Lines)  Disconnnect tool for metal lines used on fuel and air conditioning lines with spring lock connectors. It makes disconnecting the lines a quick and easy job.

LC39930

Condenser Fin Comb  Straighten bent condenser fins and improve cooling efficiency. NOTE: Does not work on condensers with wavy-type fins.

MTN8300

$11.95

$6.95

$10.95

Oil Pressure Switch Socket  Fits 1-1/16” oil pressure sending unit (gauge type), found on most all ‘87 and newer Chrysler vehicles with combination light and gauge oil pressure switches. Use with 3/8” drive ratchet.

Engine Barring Tool (‘89-‘18, 5.9L & 6.7L)  Get this tool to turn the engine over when servicing the valves. Insert this metal barring tool into the flywheel housing to engage the flywheel ring gear. The engine can then be turned by hand using a 1/2-inch drive ratchet or breaker bar. 10mm Wrench  This 10mm wrench has a 12-point box end and is a must use tool to remove the top bolt on the starter on the Dodge/Cummins Turbo Diesel 5.9L and 6.7L engines.

LC13250

$6.95

TOOL_LTBT

$34.95

WRENCH-10MM

$6.25

Quick Quad Brake Pad Spreader  This tool can be used while the brake caliper is on the vehicle or hanging free. Works on single, double, quad and six piston calipers.

LC29100

Brake Bleeder  The kit has everything needed to bleed your brakes with no mess. The plastic bottle collects the fluid, and three adapters fit common bleeder screws.

LC19200

Handy Bearing Packer  Quickly flushes out old grease and repacks bearings with less mess. The Handy Packer works on bearings up to 3-1/2” OD. To pack a bearing, place the bearing on the piston. Press down on the cap until the old grease is forced out and the new grease shows on top of the bearing. Brake/Hydraulic Clutch Fluid Tester  Quickly determine the percentage of moisture in brake fluid or hydraulic clutch fluid. The tool uses red, yellow, and green indicator lights for easy readings. Includes a handy pocket clip and AAA battery.

Catalog good through October 2018 l Prices subject to change without notice.

SPECIALTY TOOL BIN

HPCR Fuel Pump Return Flow Test Kit (‘03-‘07, 5.9L) This kit allows you to check the operation of a rail pressure relief valve and check for excessive return fuel flow from the CP3 pump. The individual tools may also be used for tests specified in your shop manual. Kit includes: (1) 12mm & (1) 14mm test fitting, gaskets, fuel line and a 1000cc glear plastic beaker.

$49.95

$7.95

LC34550

$19.95

MTN5140

$26.95

Order 770-886-2500 or genosgarage.com

l 61


SPECIALTY TOOL BIN

GATES Serpentine Belt Guide Tool Works great when you’re installing a serpentine belt in a very narrow location with not a lot of room to maneuver the belt. Serpentine Belt Tension Tool Helps release the tension on spring loaded pulley tensioners in tight locations. Fits idler pulleys requiring 15mm, 16mm, or 18mm hex, and 3/8” or 1/2” square drive. Also includes 13mm, 14mm and 15mm crowfoot wrenches. Fan Clutch Wrench Set (‘13-‘18, 6.7L)  This specialty wrench set will allow you to remove the fan clutch faster and without possibly damaging other parts in the process. Kit includes wrench and fan hub pulley holder. Fan Clutch Wrench Set (‘89-‘12, 5.9L & 6.7L)  You can probably figure out a workaround to get the fan clutch off with the tools you have, but this specialty wrench set will allow you to do it faster and without possibly damaging other parts in the process. 46MM Drive Impact Socket (3/4” Drive - 6-point)  For removing pitman arm on 2009 and up Ram trucks.

1-7/8” Drive Impact Socket (3/4” Drive - 6-point)  For removing Dana 80 axle nut.

43MM Drive Impact Socket (3/4” Drive - 6-point)  Great socket for removing hub nuts.

NEW! GATES-91209

$16.95

WLMW84010

$23.95

GG-FANWR13

$21.95

WRENCHSET1

$36.00

SUN446M

$26.50

SUN460

$26.50

SUN443M

$24.95

1-11/16” Drive Impact Socket (3/4” Drive - 6-point)  Great socket for removing hub nuts.

SUN454

1-5/8” Drive Impact Socket (3/4” Drive - 6-point)  For removing RWD axle nut on ‘94-‘02 Ram trucks.

SUN452

Dodge Hub Remover Set  Separates a frozen hub assembly from the steering knuckle. The tool drives on the bolt flange against loosened retaining bolts to separate assembly. Prevents damage to the knuckle and complete hub assembly. Tool drives on the bolt flange, so the head of the retaining bolt is not destroyed. Kit contains 39300 for older, smaller applications and 39250 for 2003-newer 4WD 3/4 ton and 1 ton pickups.

$24.95

$19.95

LC38210

$28.95

15/16” Impact Socket (3/4” Drive - 6-point)  Use this socket to remove the lug nuts on your Dodge Ram truck. A great tool to keep in your Boonie Box.

SUN430D

Impact Socket Adapter (1/2” female × 3/4” male)  This adapter allows you to use your 1/2” drive ratchet with the 3/4” impact sockets so you don’t have to buy an expensive 3/4” drive ratchet.

SUN2302

E10 Torx Socket  For external torx bolts on 11.8 differential cover used on ‘13-‘16 Ram trucks. 3/8” drive.

LC26820

Hog Ring Pliers  Instead of fighting with a regular set of pliers to install hog rings on a new seat cushion cover, make the job easier with a set of these hog ring pliers. They have an indentation that keeps the hog ring in place while squeezing it closed. Plastic Fastener Remover  Perfect for removal of door trim that is held in place with plastic fasteners. Emblem/Wheel Weight Remover  This plastic pry tool has sharp edges designed to get under the emblem or wheel weight to make removal easy.

5 Pc. Fastener & Trim Remover Set  All the tools you will need to remove interior and exterior trim on your truck.

Battery Brush  Cleans dirt and corrosion from battery terminals and cable clamps. The external brush cleans cable clamps and internal brush cleans terminal posts. Case is made of high impact plastic that will not weaken in cleaning solutions. “Handy Hooker” Circuit Tester Hook Tool  Have you pricked your finger with one of those electrical probe tools? How about grounding out the wire you were testing? The spring loaded hook pulls the wire into the sharp probe. Perfect for hard-to-reach locations. No more pricked fingers.

62 l Ram Turbo Diesel Parts & Accessories  #101

$16.95

$10.95

$2.95

HOGRINGPL

$16.95

LC35400

$6.95

MLK282230

$11.95

AST4505

$9.50

LC11120

$4.95

LC25600

$9.95

Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info


T-SHIRTS, DECALS & FUN STUFF

of s grille The y dream m

Geno’s Garage Vintage Logo long SLEEVE Shirt

Geno’s Garage ‘GRILLE OF MY DREAMS’ T-Shirt

Geno’s Garage eat, sleep, drive t-Shirt

Geno’s GARAGE ‘LONG BED DIESEL TRUCK’ t-shirt

MED, LRG, XLRG, 2XLRG TS-DRIVE:  $9.95

MED, LRG, XLRG, 2XLRG, 3XLRG TS-LBDT:  $8.95

Specify SIZE when ordering.

Specify SIZE when ordering.

Specify SIZE when ordering.

Specify SIZE when ordering.

MED, LRG, XLRG, 2XLRG TS-GS14C:  $14.95

MED, LRG, XLRG, 2XLRG TS-GRILL:  $9.95

BUBBA® CLASSIC TRAVEL MUG

Cummins Koozie

MUG-1437444:  $22.95 NEW!

KOOZIE-1244310:  $2.95

Get a Cummins koozie to keep your drinks cool.

Geno’s GARAGE Mesh Cap

CAP-GS14: $12.00 One size fits all.

Made of stainless steel with double-wall insulation to keep your hot or cold beverages at just the right temperature, it has the Cummins C logo front and center. Holds 20 ounces.

Cummins JUMBO JOE CERAMIC MUG

Cummins Stainless Vacuum Tumbler

The DIESEL ODYSSEY of Clessie Cummins

MUG-1429641:  $10.95

Grab a big cup of getyour-day-started with this mega ceramic mug. Two-tone interior-exterior and comfortable C-handle. Holds 14 oz.

MUG-1426695:  $17.95

Clessie Cummins was the father of the American truck diesel and founded the company bearing his name. This book tells of his successes and adversities.

16 oz. double wall 18/8 stainless steel thermal tumbler vacuum insulated with threaded 360 drink-thru easy clean lid. Hand wash recommended.

8-in-1 Multi-Tool Kit TOOL-1426702:  $4.95

SOFTCOVER BOOK-885000:  $25.00

This convenient pen-shaped multi-tool houses four flat-head and four Philips-head met screwdriver bits. Measures 4.25” long.

“Grille of my dreams” keychain KEYCHAIN-GRILL4G:  $7.50

CUMMINS CHROME-PLATED License Plate FRAME 1429677:  $21.95

This die-cast chrome-plated zinc license plate frame has an epoxy-filled Cummins text at top; Cummins “C” logo at the bottom.

Authentic “Reserved” Parking Signs PARKING RESERVED FOR CUMMINS OWNERS SIGN-CUMOWN:  $19.95 PARKING RESERVED FOR (insert your name) CUMMINS SIGN-CUMCUSTOM:  $29.95 Measures: 12” x 18”

EcoDiesel Decal DECAL_ECO:  $6.00

Available: White only.

Measures: 8-3/4”× 1-3/4”.

“CUMMINS Logo” License Plate DIAMOND PATTERN LP-CI3741:  $7.95

Catalog good through October 2018 l Prices subject to change without notice.

Stainless steel keychain in the shape of the Fourth Generation Ram truck grille.

Cummins Carabiner Key Fob

KEYCHAIN-C191205:  $4.50

Carabiner key holder with a split ring on strap. Black strap and white Cummins logo. NOTE: Not for climbing.

‘Cummins C’ Decal

10” × 10” DECAL DECAL_CUMM:  $9.00 6” × 6” DECAL DECAL_SM_C:  $6.00 Available: Black or White

Order 770-886-2500 or genosgarage.com

l 63


CALL TO ORDER AT 770-886-2500 OR SHOP US ONLINE AT GENOSGARAGE.COM

CUMMINS CONTRAST Cap CAP-1433873:  $9.95

CUMMINS DEPENDABLE DIESEL T-Shirt MED, LRG, XLRG TS-1433408:  $15.95 2XLRG, 3XLRG TS-1433408:  $17.95

Cummins DEPENDABLE DIESEL POWER T-Shirt MED, LRG, XLRG TS-1502006:  $17.95 2XLRG TS-1502006:  $19.95

Specify SIZE when ordering.

Specify SIZE when ordering.

CAP-1506587:  $16.95 NEW!

CUMMINS olive TWILL Cap

CAP-1506590:  $9.95 NEW!

CUMMINS softstyle T-Shirt

MED, LRG, XLRG TS-1500639:  $14.95 NEW! 2XLRG TS-1500639:  $16.95 NEW! 3XLRG TS-1500639:  $17.95 NEW!

CUMMINS Red Ball Trucker Cap

Specify SIZE when ordering.

‘CUMMINS Oil Engine’ T-Shirt

CUMMINS VINTAGE LABEL Cap

CAP-CI0057:  $9.95

CUMMINS Trucker Cap CAP-400195:  $9.95

Cummins ‘1919’ T-Shirt

CUMMINS cHINO TWILL VISOR CAP

CUMMINS TITANIUM SPORT Cap

CAP-1506589:  $16.95 NEW!

CAP-1042051:  $12.95

CUMMINS QUARRY Cap

CUMMINS MICROFIBER Cap

CUMMINS ‘1919’ Cap

CUMMINS Historical Oil Engine Mesh Cap

CAP-400327:  $12.95

CAP-1501990:  $14.95

CUMMINS Diesel Cross Mesh Cap CAP-1042043:  $10.95

MED, LRG, XLRG TS-400114:  $14.95 2XLRG TS-400114:  $16.95

MED, LRG, XLRG TS-1153101:  $15.95 2XLRG TS-1153101:  $17.95

Specify SIZE when ordering.

Specify SIZE when ordering.

CUMMINS Mossy Oak® Cap CAP-181185:  $11.95

CUMMINS HEATHERED Cap

CUMMINS STRIPED beanie

CAP-1429729:  $11.95

CUMMINS Denim/Mesh Cap CAP-400325: $11.95

CAP-1244166:  $11.95

CAP-1433870: $12.95

CAP-1244162:  $12.95

TURBO DIESEL REGISTER

Logo Items

2” TDR Grille Badge

TDR-GRILLE-BDG:  $17.50

Identify your TDR affiliation with this grille badge.

BLACK WITH GRAY FLAME CAP-TDR-FLAME-87478 $14.95

HIGH PROFILE CAP-TDR (Gray):  $13.95 CAP-TDR (Red):  $13.95

LOW PROFILE CAP-TDR-LORED:  $13.95

GROUND SHIPPING FEES SHIPPING & HANDLING (ORDER AMOUNT / SHIPPING COST):

$0 – $19.99 $7.95

$20 – $24.99 $8.95

$25 – $49.99 $9.95

$50 – $74.99 $10.95

$75 – $99.99 $12.95

$100 – $149.99 $14.95

$150 – $194.99 $16.95

$195+ 6% of order total

ACTUAL SHIPPING CHARGES WILL APPLY FOR ALL AREAS OF ALASKA AND HAWAII. INTERNATIONAL CUSTOMERS CONTACT US FOR TOTAL PRIOR TO SHIPPING. EXPEDITED SHIPPING AVAILABLE. PLEASE CALL US FOR A SHIPPING QUOTE.

Geno's Garage Catalog #101 - Summer 2018  

Dodge Cummins Turbo Diesel and Ram 1500 EcoDiesel Parts and Accessories catalog.

Geno's Garage Catalog #101 - Summer 2018  

Dodge Cummins Turbo Diesel and Ram 1500 EcoDiesel Parts and Accessories catalog.