Page 1

The durable, contemporary timber solution.

Internal


Cover photo: Guipuzcoan Football Federation Project: Izaskun Larzábal Photography: Susana Aréchaga and Luis M. Ambrós Parklex 2000, Eucalyptus


Indoor wood coverings. The natural wood used to manufacture Parklex provides a look of quality and comfort for building interiors from the very first moment. With Parklex, ceilings, walls and floors, in addition to any other surface, such as counter tops, bathrooms and even showers take on a new leading role. If you’re looking for quality and comfort, Parklex has a wide range of natural wood finishes that achieve both purposes. In addition, its variety of finishes allows decorators and architects to be creative with combinations on any type of surface, allowing them to decorate the floors, walls or ceiling in the same wood, providing the degree of quality and comfort that only natural, highquality materials can convey.


Floor, walls and ceiling.

The same colors and finishes throughout the interior.

Parklex paneling may be installed on any surface: floors, walls and ceilings, combining aesthetic elements or keeping the same colors and finishes throughout the interior, converting rooms into authentic enclosures, completely lined with natural wood panels.

Recommended products: 路 Floors:

2000 3000 路 Walls and ceiling: Dry areas:

500 Damp areas:

700


Quality at your feet.

Recommended products: 路 Floors:

2000 3000

The quality of Parklex comes from the materials and processes used to manufacture them. This quality is demonstrated precisely where the product suffers the most wear: floors, transit spaces and areas of intensive use, where any material suffers a high level of wear. Parklex, however, performs at top levels in these areas, with its properties remaining unchanged. Simple maintenance is all that is needed to prolong the life of these coverings, which makes them immediately economical.

It demonstrates its quality where it suffers the most wear.


Silence: another form of comfort.


Recommended products: 路 Walls and ceiling:

500

Noise and reverberation prevention is also a form of comfort. Parklex 500 is designed to be installed as an indoor wall and ceiling covering in locations with high acoustic absorption requirements: conference halls, presentation rooms, auditoriums, offices, etc., as well as furniture coverings. These panels insulate rooms from outside noise or that of nearby areas, providing an even greater feeling of comfort.

Coverings for locations with high acoustic absorption requirements.


Excellent fire behavior. Parklex means peace of mind.


Recommended products: 路 Floors:

2000 路 Walls and ceiling: Dry areas:

500 Damp areas:

700

In addition to being manufactured from natural wood, the entire Parklex line is tested according to the new European standard EN 13.501 regarding reaction to fire, obtaining the best results possible for organic materials. With Parklex, you are sure to make the right decision.

Natural wood with the best results for reaction to fire.


Bathrooms, gymnasiums, spas or pools: don’t relinquish comfort.

Cozy, moisture resistant spaces.

Moisture is a factor that generally determines the materials used in bathrooms. Thanks to the production and treatment processes Parklex uses on natural wood, it is now possible to use Parklex coverings in any area of the bathroom, even in the shower, transforming them into areas that are just as inviting as the rest of the interior. The Parklex line stands out for its moisture resistance, which also allows its problem-free use in gymnasiums, spas or pools, making these areas (and any other space where appearance, hygiene, resistance and cleanliness are important) exclusive places that are both pleasant and totally unique.

Recommended products: · Walls and ceiling: Damp areas:

700 · Floors (bathrooms and gymnasiums):

2000


Parklex Projects


Guggenheim Bilbao Bilbao, Spain. Architect: Frank O. Gehry Project manager: César Caicoya Parklex 2000, Museum Ash

Bilbao, May 14, 2007

Bilbao, 14 de mayo de 2007

Dear Sirs:

Estimados Señores: After ten years of intensive use, withstanding the regular heavy machinery traffic and the exposition of sculptures weighing many tons, we would like to express our satisfaction with the wood floors in the Guggenheim Museum galleries (Manufacturer: Composites Gurea, model Parklex 2000, lightened ash), with regards to both the ease of cleaning and their durability and strength.

Rogelio Diez Maintenance and Installations Supervisor

Tras diez años de funcionamiento intensivo de los suelos de madera en las Galerías del Museo Guggenheim (Fabricante Composites Gurea, modelo Parklex 2000, fresno clarificado), soportando el paso habitual de maquinaria pesada y la exposición de esculturas de gran tonelaje, comunicamos nuestra satisfacción con los mismos, tanto en su facilidad de limpieza como en su durabilidad y resistencia.


Navarran Government Press Room Pamplona, Spain. Architects: Javier Barcos Berruezo and Manolo EnrĂ­quez JimĂŠnez Parklex 500, Walnut Parklex 2000, Walnut


Marqués de Riscal Hotel The Luxury Collection. Alava, Spain. Architect: Frank O. Gehry Project manager: César Caicoya Parklex 500, Maple Parklex 2000, Maple


Cepa 21 Wineries Valladolid, Spain. Architects: BSA Arquitectos Interior design: TGA+Asociados and Javier Machimbarrena Parklex 500, Maple

Burlada Cultural Center Navarre, Spain. Architect: Miguel Ayate Bariain Parklex 500


Puerta de America Hotel Madrid, Spain. Architect: Jean Nouvel Parklex 2000


Zubieta XXI Sports Complex Guipuzcoa, Spain. Project: Izaskun Larzábal, Fernando Gárate and Agustín Oteiza Photography: Susana Aréchaga and Luis M. Ambrós Parklex 2000, Natural Beech


De la Pe単a Station Bilbao, Spain. Architect: GPD Studio Parklex 500


La Perla Hotel Pamplona, Spain. Architect: Javier MartĂ­nez Oroquieta Parklex 500, Walnut Parklex 2000, Walnut

Thermae Bath Spa The Minerva Bath. Bath, United Kingdom. Architect: Nicholas Grimshaw & Partners Photography: Matt Cardy Parklex 700, Maple


Guipuzcoan Football Federation Guipuzcoa, Spain. Project: Izaskun Larzábal Photography: Susana Aréchaga and Luis M. Ambrós Parklex 2000, Eucalyptus


Attic in San Sebastian Guipuzcoa, Spain. Interior design: Ver贸nica Conejos Parklex 2000, Museum Ash

COEC, Catalonian Odontologist and Stomatologist Association Barcelona, Spain. Architect: Pere Fosch i Alvarez Parklex 3000, Maple


Beroa Bar Guipuzcoa, Spain. Design: Formak Studio Parklex 2000 (floor) Parklex 3000, Zebrano (bar)

Home in Pamplona Navarre, Spain. Interior design: Héctor Elizaga Photography: Susana Aréchaga and Luis M. Ambrós Parklex 2000, Maple


Air France, VIP Lounge Narita International Airport. Tokyo, Japan. Architect: NoĂŠ Duchaufour-Lawrance Parklex 500, Reconstituted Oak Parklex 2000, Reconstituted Oak


Electronics Arts London, United Kingdom. Architect: Foster + Partners Photography: Nigel Young Parklex 2000, Natural Beech

Amrey Hotel Barcelona, Spain. Architect: Ram贸n Domenech Parklex 2000, Maple


Home in San Sebastian Guipuzcoa, Spain. Interior design: Javier Machimbarrena Photography: Susana Aréchaga and Luis M. Ambrós Parklex 2000, Walnut

Home in Puerto Pollença Majorca, Spain. Architect: Joan Riusech Photography: Susana Aréchaga and Luis M. Ambrós Parklex 2000, Maple


Technical characteristics


About Parklex Production process

Each type of Parklex is subjected to a different production process, depending on its final application: interiors, exteriors, damp areas, etc. The base is always high-density laminated wood with a paper fiber core that has been treated with thermosetting resins and compressed at high pressure and temperature.

Finishes

Perfect adaptation to the project design is an essential requirement. That’s why the technology used to manufacture Parklex allows us to apply different finishes, all in natural wood, to integrate them completely into the environment that is required for each project.

International

Providing service on an international level has meant establishing an extensive network of Parklex distributors on all five continents. This allows us to work more closely with our clients and offer them better service in a way that is more accessible to them. It also lets us understand their needs perfectly and first hand.

Guarantees / Quality Certificates

Rigorous testing guarantees Parklex’s excellent performance.

Natural wood

The surface is always made from 100% natural wood, treated according to its application: to resist special weather conditions or to perfectly resist the intensive use it might receive in interiors.

Range

The variety of finishes and colors in natural and dyed panels sets Parklex apart as a result of its versatility, making it the ideal covering from any type of project.

Architects

The best architects in the world use Parklex in their most emblematic creations. Why is this so? Because they feel comfortable and at ease, and because the results do not disappoint them. Without a doubt, it is because at Parklex we have been working for over 15 years on a daily basis with architects from all over the world, including, for example, Santiago Calatrava, Frank Gehry, Norman Foster, Jean Nouvel and Nicholas Grimshaw, adapting our range to their requirements. This has made Parklex the natural wood covering of choice in many of the best quality and best-known projects in the world. This can only be achieved by a brand with an absolute guarantee, capable of offering the perfect product, totally adapted to their needs, with problem-free application.


Parklex – The ideal solution Quality and performance are only the most visible results of Parklex. As if this weren’t enough, the advantages offered by Parklex are evident from the moment it is installed, up to its long-term maintenance.

Characteristics

Ease of installation.

Maintenance.

The floating flooring system is simple and low-cost. The rest of the products may be easily installed, following clear, professional instructions.

Parklex does not require any sort of scraping or varnishing as part of its maintenance. It need only be lightly cleansed with a mop, using liquid ph-neutral soap and water.

Acoustic absorption.

Service.

Parklex 500 and Parklex 700 may be perforated, making them the ideal materials for acoustic absorption. They have been manufactured specifically for interiors where the acoustic factor is important.

Parklex has a technical support department to answer any questions regarding product assembly and to give advice on the most appropriate type of covering to meet every need.

Strength.

Quality.

Material for intensive use indoor areas is made with the highest quality natural wood panels that have been impregnated using the Gureprex system, which provides a series of benefits with regards to abrasion, moisture resistance, hardness, scratch resistance and dimensional stability that are far superior to any of the varnish-treated products currently found on the market.

Parklex means quality. All our products have earned the CE mark and carry an absolute guarantee. Exterior panels are manufactured according to the European standard EN 438, which applies to HPL (high pressure laminates). This is why Parklex is the covering preferred by the world’s most prestigious architects.

Moisture resistance.

Fire behavior.

The technology used by Parklex to manufacture the exterior coverings completely guarantees them against extreme weather conditions: rain, sun, humidity and heat. This same technology allows us to provide a material for interiors with identical resistance properties. Parklex therefore provides the ideal product for damp areas.

The entire Parklex line is classified according to the new European standard EN 13.501-1:2002 regarding reaction to fire, obtaining the best results possible for organic materials.


Parklex product guide

Damp areas

700 Stratified timber panels for internal use, with high resistance to humidity.

Walls and ceilings

Dry areas

500 Natural timber ceiling and wall finishes.

Internal

Floating parquet

2000 Natural timber floor for extreme wear environments.

Floors

Raised flooring

3000 Natural timber finish for full access raised floors.

External

Faรงades

Facade High-density stratified timber panels for external use.


700

Stratified timber panels for internal use, with high resistance to humidity. Parklex 700 is a high-density stratified natural timber panel, made from kraft paper that has been treated with thermoset resins compressed under high pressures and temperatures, finished with natural timber veneers.

Finish range (1) Panels manufactured from joined timber

veneers. There may be as many as 12 veneer pieces in each full panel (16 in the case of stained finishes).

Ambar (2)

Antra (2)

Ayous Natural

Black

Cherry (1)

Copper (2)

Eucalyptus (1)

Museum Ash (1)

Gold (2)

Grey Beech (1)

Natural Beech (1)

Green Beech (1)

Maple (1)

Walnut (1)

Onix (2)

Quartz (2)

Natural Oak (1)

Reconstituted Oak (1)

Rubi (2)

Sapelli (1)

Silver (2)

Wengue (1)

Natural Zebrano (1)

Surface characteristics (2) Available only in a Smooth surface finish.

Woodskin速. A finish that allows you to feel the grain and subtlety of natural timber.

Special finishes Smooth. Traditional Parklex finish. Reveals the simple, natural beauty of the wood it is manufactured with.

Assembly systems * Chequerplate Rubber

Exposed fastening. The Parklex panels are fastened with stainless steel screws or rivets to the treated wood or metal substructure.

Hidden fastening, with special hanging profiles. The Parklex panels are attached to the aluminum substructure, using guide profiles and hanging pins.

Hidden fastening, using adhesive. The Parklex panels are fastened using adhesive to the treated wood or metal substructure.

Hidden fastening, with caps. The Parklex panels are attached with screws hidden by caps with a diameter of 10,75mm and a section of 2mm, using the same material and finish as the panel.

* For more information on installation, consult the Internal Parklex Assembly Catalogue or our web page (www.parklex.com).

Smooth Rubber

Chequerplate (3)

Perforated

Panel construction Moisture resistant overlay Natural timber veneer HPL core Natural timber veneer Balancing film HPL core

Parklex is manufactured from fine timber veneers, therefore the colour and grain of different batches will exhibit natural variations. Due to the limitations of printed media, the finishes printed in this catalogue are merely an approximation of their real color. For this reason, before placing any order, Parklex recommends consulting our sales personnel to request actual samples.


Technical characteristics Thickness ≥ 6mm

Tests

Stand

Property or attribute

Measurement unit

1. Inspection Colour, pattern and surface finish

Result Parklex 700 CGS (Standard)

Parklex 700 CGF (Fire Class)

Rev: 03 (09.2009)

Rev: 03 (09.2009)

EN 438-8 Part 5.2.2.3

Due to the fact that wood is a natural product, each veneer may be considered as unique. Colour and structure differences are considered as normal. Singularities such as knots and resin inclusions are not considered as defects, but as a part of the décor. There are differences in light fastness performances depending on the wood species and the source of the wood.

EN 438-2 Part 5

6,0 ≤ t < 8,0

2. Dimensional tolerances Thickness (t)

± 0,40

mm

8,0 ≤ t < 12,0

± 0,50

12,0 ≤ t < 16,0

± 0,60

16,0 ≤ t < 20,0

± 0,70

20,0 ≤ t < 25,0

± 0,80

Length and width

EN 438-2 Part 6

mm

+10 / - 0

Edge straightness

EN 438-2 Part 7

mm/m

1,5

Edge squareness

EN 438-2 Part 8

mm/m

1,5

EN 438.-2 Part 17

Cumulative dimensional change (t≥6_mm)

% max Longrain

0,3

3. Physical properties Dimensional stability at elevated temperatures

% max Crossgrain Resistance to impact with large diameter ball

EN 438-2 Part 21

Maximum height for which no visible surface cracking or imprint greater than 10mm (t≥ 6mm)

Tensile strength

EN ISO 527-2

Longrain

0,6

mm

≥ 1.800

MPa

≥ 60

µ

110

N

> 2.000

Crossgrain

4. CE Safety requirements Water vapour permeability

EN 438-7 Part 4.4

Wet cup method Dry cup method

Resistance to fixings

EN 438-7 Part 4.5

Screw holding value t ≥ 6_mm

250

FScrew holding value t ≥ 8_mm

> 3.000

Screw holding value t ≥ 10_mm

> 4.000

Release of formaldehyde

EN 438-7 Part 4.11

Classification

Rating

E1

Flexural strength

EN ISO 178

Longrain

MPa

≥ 80

MPa

≥ 9.000

≥ 80

Crossgrain Flexural Modulus

EN ISO 178

Resistance to inmersion in boiling water

EN 438-2 Part 12

Longrain

≥ 9.000

Crossgrain

Density

EN ISO 1.183

Moisture absorbed

%

≤2

Moisture absorbed

%

≤2

Appear

Degree

Density

g/cm3

Euroclass t ≥ 6_mm

Classification

Thickness* - Smooth finish

3, 6, 8, 10, 12,14, 18 & 22 mm

Thickness* - Chequerplate finish

10, 12,14, 18 & 22 mm

≤3 ≤6 ≥4 ≥ 1,35

5. CE Safety requirements - Reaction to fire Reaction to fire

EN 13.501-1

Panel dimensions Length (grain direction) x width

2440 x 1220 mm

* 3 and 6 mm can only be used for special applications. Other thicknesses may be available upon request.

C-s2,d0

B-s2,d0


500

Natural timber ceiling and wall finishes.

Parklex 500 is a timber panel manufactured from 100% natural timber fibres, pressed under high temperatures and impregnated with thermoset resins using our exclusive Gureprex system.

Finish range (1) Panels manufactured from joined timber

veneers. There may be as many as 12 veneer pieces in each full panel (16 in the case of stained finishes).

Ambar

Antra

Ayous Natural

Bamboo (1)

Black

Cherry (1)

Eucalyptus (1)

Museum Ash (1)

Grey Beech (1)

Natural Beech (1)

Green Beech (1)

Maple (1)

Walnut (1)

Onix

Natural Oak (1)

Reconstituted Oak (1)

Rubi

Sapelli (1)

Wengue (1)

Natural Zebrano (1)

Surface characteristics

Panel construction

Woodskin速. A finish that allows you to feel the grain and subtlety of natural timber.

Gureprex wear resistant overlay Natural timber veneer Resin bonded WBP plywood core HPL balancer Wood

Acoustics

Assembly systems * Parklex 500 acoustic is designed for interior wall and ceiling finishes requiring high levels of acoustic absorption. It is machined in different forms and dimensions allowing for the desired level of acoustic performance.

Slots

Perforated

Exposed fastening. The Parklex panels are fastened with stainless steel screws or rivets to the treated wood or metal substructure.

Hidden fastening, with special hanging profiles. The Parklex panels are attached to the aluminum substructure, using guide profiles and hanging pins.

Hidden fastening, using adhesive. The Parklex panels are fastened using adhesive to the treated wood or metal substructure.

Hidden fastening, with caps. The Parklex panels are attached with screws hidden by caps with a diameter of 10,75mm and a section of 2mm, using the same material and finish as the panel.

* For more information on installation, consult the Internal Parklex Assembly Catalogue or our web page (www.parklex.com).

Parklex is manufactured from fine timber veneers, therefore the colour and grain of different batches will exhibit natural variations. Due to the limitations of printed media, the finishes printed in this catalogue are merely an approximation of their real color. For this reason, before placing any order, Parklex recommends consulting our sales personnel to request actual samples.


Technical characteristics Thickness ≥ 8mm

Tests

Standard

Property or attribute

Measurement unit

1. Inspection requirements Colour, pattern and surface finish

EN 438-8 Part 5.2.2.3

Result Parklex 500 VDS (Standard)

Parklex 500 VDF (Fire Class)

Rev: 03 (09.2009)

Rev: 03 (09.2009)

Due to the fact that wood is a natural product, each veneer may be considered as unique. Colour and structure differences are considered as normal. Singularities such as knots and resin inclusions are not considered as defects, but as a part of the décor. There are differences in light fastness performances depending on the wood species and the source of the wood

2. Dimensional tolerances Thickness (t)

EN 438-2 Part 5

t = 6,0

mm

+1,0 / -0,6

t = 8,0

+1,6 / -1

+1,0 / -0,7

t = 11,0

+1,4 / -1,1

+1,2 / -0,8

t = 14,0

+1,6 / -1,1

+1,3 / -0,9

t = 17,0

+1,3 / -1,3

+1,4 / -1,0

t = 20,0

+1,3 / -1,1

+1,6 / -1,2

t = 40,0

+2,0 / -1,6 mm

≤0,6

mm

+10 / - 0

mm/m

1,5

EN 438-2 Part 8

mm/m

1,5

EN 438-2 Part 10

Resistance to surface wear

Initial wear point

≥ 50

Wear resistance

≥ 150

Tolerance for thickness variations inside a panel

EN 315:1993

Length and width

EN 438-2 Part 6

Edge straightness

EN 438-2 Part 7

Edge squareness

t (nominal thickness)

3. Physical properties Revolutions Resistance to surface wear

Resistance to inmersion in boiling water

EN 438-2 Part 12

Aspect

Rating

≥4

Resistance to scratching

EN 438-2 Part 25

Force

Rating

≥2

Lightfastness (xenon arc)

EN 438-2 Part27

Contrast

Grey scale rating

≥4 < 4 (A) ≥ 70

Longitudinal direction Flexural strength

Flexural modulus

EN 310

MPa Transversal direction

≥ 60

Longitudinal direction

≥ 7000

EN 310

MPa

≥ 6000

Transversal direction Perpendicular tensile strength

ASTM C 297

Density

-

Adhesion force

MPa

Density

g/cm3

≥2 ≥ 0,75

≥ 0,80

4. CE Safety requirements Resistance to fixings

EN 438-7 Part 4.5

Force

N/mm

≥ 200

≥ 130

Bonding strength

EN 438-7 Part 4.7

Bond strength

MPa

≥ 1,42

≥ 2,64

Flexural tensile strength

EN 438-7 Part 4.8

Bond strength

MPa

≥ 1,42

≥ 2,64

Content of pentachlorophenol

EN 438-7 Part 4.10

Release of formaldehyde

EN 717-2

Glue-line quality

≤5

Content pentachlorophenol

ppm

Release of formaldehyde

Rating

EN 438-7 Part 4.13.3

Expression of results

Rating

Resistance to elevated temperature

EN 438-7 Part 4.13.3

Aspect

Result

Water resistance

EN 438-7 Part 4.13.3

Thickness increase

%

≤7

Euroclass t ≥ 8mm

Classification

D-s3,d0

Euroclass t ≥ 14mm

Classification

B-s2,d0

E1 5

3 No damage ≤ 2,5

(A) Maple; Bryna; Ayous Natural; Cherry; Natural Beech; Reconstituted Oak

5. CE Safety requirements - Reaction to fire Reaction to fire

EN 13.501-1

Panel dimensions Length (grain direction) x width * Other thicknesses may be available upon request.

2440 x 1220 mm

Thickness*

8, 11, 14, 17, 20 & 26 mm


2000

Natural timber floor for extreme wear environments. Parklex 2000 is a natural timber floating floor made from the highest quality veneers, impregnated using our exclusive Gureprex system. This provides extraordinary qualities of dimensional stability and resistance to both abrasion and humidity.

Finish range (1) Panels manufactured from joined timber

veneers. There may be as many as 12 veneer pieces in each full panel (16 in the case of stained finishes).

Ambar

Antra

Ayous Natural

Bamboo (1)

Black

Cherry (1)

Eucalyptus (1)

Museum Ash (1)

Grey Beech (1)

Natural Beech (1)

Green Beech (1)

Maple (1)

Walnut (1)

Onix

Natural Oak (1)

Reconstituted Oak (1)

Rubi

Sapelli (1)

Wengue (1)

Natural Zebrano (1)

Surface characteristics

Maintenance and cleaning

Matt. A finish that provides a high quality, comfortable surface appearance that only authentic natural timber can provide.

Resistance to abrasion Resistance to abrasion

Maintenance. The non-porous nature of the surface prevents the penetration of dirt. Parklex 2000 requires no specific stripping or re-finishing.

Cleaning. Mop with water and (neutral) gel soap.

Assembly systems *

AC4

Floating parquet. Floating installation of boards glued tongue-in-groove over a layer of insulation.

Glued. Installation of tongue-in-groove boards that are adhered to waterproof DM, using lines of adhesive.

Parquet over underfloor heating. Installation as floating parquet over underfloor heating.

Panel construction Gureprex wear resistant overlay Natural timber veneer

* For more information on installation, consult the Internal Parklex Assembly Catalogue or our web page (www.parklex.com).

Resin bonded WBP plywood core HPL balancer Wood

Parklex is manufactured from fine timber veneers, therefore the colour and grain of different batches will exhibit natural variations. Due to the limitations of printed media, the finishes printed in this catalogue are merely an approximation of their real color. For this reason, before placing any order, Parklex recommends consulting our sales personnel to request actual samples.


Technical characteristics Thickness ≥ 11 mm

Tests

Standard

Property or attribute

Measurement unit

Result Parklex 2000 HDS (Standard)

1. Inspection requirements Colour, pattern and surface finish

Rev: 04 (09.2009)

EN 438-8 Part 5.2.2.3

Due to the fact that wood is a natural product, each veneer may be considered as unique. Colour and structure differences are considered as normal. Singularities such as knots and resin inclusions are not considered as defects, but as a part of the décor. There are differences in light fastness performances depending on the wood species and the source of the wood

2. Dimensional tolerances Gap between pieces

EN 13.329

mm

≤ 0,2

Leap between pieces

EN 13.329

mm

≤ 0,15

3. Physical properties ≥ AC4

Resistance to surface wear

EN 438-2 Part10

Initial point (PI)

Revolutions

Resistance to inmersion in boiling water

EN 438-2 Part 12

Aspect

Rating

≥4

Impact resistance (small diameter ball)

EN 438-2 Part 20

Force resort

N

≥ 10

Resistance to scratching

EN 438-2 Part 25

Force

Rating

≥3

Resistance to stain

Lightfastness (xenon arc)

EN 438-2 Part26

EN 438-2 Part27

≥ 4.000

Rating (Group 1 & 2)

≥5

Rating (Group 3)

≥4

Aspect

Contrast

≥4

Grey scale rating

< 4 (B) Resistance to cigarettes burn

EN 438-2 Part 20

Flexural strength

EN 310

Aspect

≥4

Rating

≥ 70

Longrain

Flexural modulus

MPa Crossgrain

≥ 60

Longrain

≥ 7000

EN 310

MPa

≥ 6000

Crossgrain Density

-

Density

g/cm3

≥ 0,75

≤5

4. CE Safety requirements Pentachlorophenol content

EN 438-7 Part 4.10

Content pentachlorophenol

ppm

Release of formaldehyde

EN 717-2

Release of formaldehyde

Rating

E1

Electric resistance

EN 1.081

Vertical resistance

M_

825 (antiestático)

Tendency to accumulation electrostratic charges

EN 1.815

Potential difference

KV

<2

Thermal conductivity

EN 12.524

Conductivity

W/(m*K)

0,17

Water tightness

EN 13.553

Water penetration

Watertight

Slide

EN 13.893

Dynamic coefficient of friction

Classification _

Slip/skid resistance

UNE-ENV 12.633

Slip resistance value

USRV(Rd)

Clase 1

Euroclass t ≥ 11mm

Classification

Bfl-s1

0,73 (D5)

(A) Maple; Bryna; Ayous Natural; Cherry; Natural Beech; Reconstituted Oak

5. CE Safety requirements - Reaction to fire Reaction to fire

EN 13.501-1

Package measurements Contents per package Minimum no. Panels m2 Kg Maximum contents per pallet No. panels No. packages m2 Kg

2440 x 188 x 14 mm* 8 3,68 40

2440 x 290 x 14 mm* 1 0,71 9,5

2440 x 590 x 14 mm* 1 1,44 17

192 24 88,3 960

84 – 59,7 800

42 – 60,7 800

* Standard thickness 14mm. Other thicknesses may be available upon request.


3000

Natural timber finish for full access raised floors. Parklex 3000 is a high-density stratified timber panel, impregnated using our exclusive Gureprex system. It may be adhered to any type of support material (fibreboard, MDF, fibre cement, galvanised steel etc.) normally used to construct full access floors.

Finish range (1) Panels manufactured from joined timber

veneers. There may be as many as 12 veneer pieces in each full panel (16 in the case of stained finishes).

Ambar

Antra

Ayous Natural

Bamboo (1)

Black

Cherry (1)

Eucalyptus (1)

Museum Ash (1)

Grey Beech (1)

Natural Beech (1)

Green Beech (1)

Maple (1)

Walnut (1)

Onix

Natural Oak (1)

Reconstituted Oak (1)

Rubi

Sapelli (1)

Wengue (1)

Natural Zebrano (1)

Surface characteristics

Assembly systems *

Matt. A finish that provides a high quality, comfortable surface appearance that only authentic natural timber can provide.

Hidden fastening, using adhesive. The Parklex panels are attached to different types of supports, using adhesive. * For more information on installation, consult the Internal Parklex Assembly Catalogue or our web page (www.parklex.com).

Panel construction

Gureprex wear resistant overlay Natural timber veneer HPL balancer Wood

Parklex is manufactured from fine timber veneers, therefore the colour and grain of different batches will exhibit natural variations. Due to the limitations of printed media, the finishes printed in this catalogue are merely an approximation of their real color. For this reason, before placing any order, Parklex recommends consulting our sales personnel to request actual samples.


Technical characteristics Thickness 1 mm

Tests

Standard

Property or attribute

Measurement unit

Result Parklex 3000 HGS

1. Inspection requirements Colour, pattern and surface finish

Rev: 03 (09.2009)

EN 438-8 Part 5.2.2.3

Due to the fact that wood is a natural product, each veneer may be considered as unique. Colour and structure differences are considered as normal. Singularities such as knots and resin inclusions are not considered as defects, but as a part of the décor. There are differences in light fastness performances depending on the wood species and the source of the wood

2. Dimensional tolerances Thickness (t)

EN 438-2 Part 5

t = 1 mm

mm

± 0,15

Length and width

EN 438-2 Part 6

mm

+10 / - 0

Edge straightness

EN 438-2 Part 7

mm/m

1,5

Edge squareness

EN 438-2 Part 8

mm/m

1,5

Planimetry

EN 438-2 Part 9

mm/m

120

Revolutions

0

EN 438-2 Part 10

Resistance to surface wear

Abrasion class

AC4

Initial point

≥ 4.000

Delamination

Pass/ No pass

Pass

Longitudinal

% max

0,75

Transversal

% max

1,25

N

≥ 10

3. Physical properties

Resistance to surface wear

Resistance to inmersion in boiling water

EN 438-2 Part 12

Dimensional stability at high temperatures

EN 438-2 Part17

Impact resistance (small diameter ball)

EN 438-2 Part 20

Force ressort

Resistance to scratching

EN 438-2 Part 25

Force

Resistance to stain

Lightfastness (xenon arc)

EN 438-2 Part26

Rating

≥3

Grupos 1 & 2

≥5

Grupo 3

≥4

Aspect

EN 438-2 Part27

Contrast

Grey scale rating

≥4 < 4 (A)

Resistance to cigarette burns

EN 438-2 Part 30

Aspect

Rating

≥2

Density

EN ISO 1.183

Density

Classification

≥ 1,1

Euroclass

Classification

D-s2,d0 (B)

(A) Maple; Bryna; Ayous Natural; Cherry; Natural Beech; Reconstituted Oak

4. Reaction to fire Reaction to fire

EN 13.501-1

(B) Composite panels made by a non FIRE RETARDANT HPL adhered to a non fireproof wood substrate.

Panel dimensions * Standard - Length (grain direction) x width

610 x 610 mm

Maximum - Length (grain direction) x width

2440 x 1220 mm

* Special dimensions available for other applications, upon request.

Thickness

1 mm


Other Parklex products

Facade

External

High-density stratified timber panels for external use. Parklex Facade is a high-density stratified timber panel manufactured from kraft paper treated with resins thermoset under high pressure and temperature, finished with natural timber veneers highly resistant to UV radiation and atmospheric agents.

Parklex Facade includes Everlook速, a special overlay that dramatically increases the normal life of the panel, improving UV resistance and colour stability. It also allows for the development of new panels with an extensive range of finishes.

Finish range

Ambar

Antra

Copper

Gold

Surface characteristics

Onix

Quartz

Rubi

Silver

Panel construction PVDF Antigraffiti overlay

Smooth. Traditional Parklex finish. Reveals the simple, natural beauty of the wood it is manufactured with.

Everlook

Natural timber veneer HPL core Natural timber veneer Balancing film HPL core

NOTE. For more information about this product, consult the External Parklex Catalogue, the External Parklex Assembly Catalogue or our web page (www.parklex.com).

Parklex is manufactured from fine timber veneers, therefore the colour and grain of different batches will exhibit natural variations. Due to the limitations of printed media, the finishes printed in this catalogue are merely an approximation of their real color. For this reason, before placing any order, Parklex recommends consulting our sales personnel to request actual samples.


Applications

1.

2.

3.

1. Semilcos

head office

Vicenza, Italy. Architect: Pollini+Smania 2. Hospital

Korea. Architect: Seo hae-cheon 3. Children

Museum

Ireland. Architect: Traynor O’Toole 4. Alhambra

4.

Information points

Granada, Spain. Architect: Francisco Martínez Manso, Rafael Soler Márquez


Facade 700 500 2000

EN/v04/0912

3000

ER-0370/2003

www.parklex.com COMPOSITES GUREA, S.A. [t ] +34 948 625 045 [f ] +34 948 625 015 Zalain auzoa, 13

31780 Vera de Bidasoa Navarra (Spain)

parklex@parklex.com

cat-int_en-v04  
Read more
Read more
Similar to
Popular now
Just for you