Page 1

Rellok Floor Saws RSF 90


Rellok RSF 90 floor saw

The RSF 90 is a compact floor saw for light cuts and repair jobs in asphalt or concrete surfaces. In designing the machine we paid special attention to stability and durability. This makes the RSF 90 suitable as small equipment for the fleet of professional cutting services or tool rentals. The concrete saw is powered by the time-tested Honda GX-390 petrol engine with a low-maintenance cyclonic air filter. Power is transmitted to the cutting shaft directly through the V-belt. The cut depth and removal are adjusted via low-maintenance linkage. The generously sized crank handle is located directly within the operator’s reach and features a mechanical lock to prevent accidental adjustment. An adjustable display with easy to read scale is used to control the depth of the cut. The height adjustable sliding handle is quadruple rubber-cushioned for particularly low vibration. The grip panel features a built-in emergency shut-off and tool holders. The guide adjustment is extra sturdy and features a roller guide. When changing cutting sides the guide tip can simply be switched over. Petrol and water tank inlets are accessible at all times. The water tank features a very large filler opening and a handle makes it easy to transport. The water tank support has a frame-style design. This eliminates the need for additional retention through the use of straps or similar. A trapezoidal blade guard bracket alleviates attaching the guard. The front portion of the blade guard can be flipped up to make cuts close to walls or curbs.

Low-maintenance cyclonic air fliter.

Foot-operated parking brake prevents the machine from accidentally rolling away.

Traxx Construction Products Pty Ltd Unit 4/1 Rocklea Drive, Port Melbourne, Victoria 3207, Australia T +61 (0) 3 9646 9200 | F +61 (0) 3 9645 6942 | E please visit

Rellok RSF 90 Floor Saw Specifications Technical Data

RSF 90

Max. Cutting depth

200 mm

Blade/bevel disk Ă˜

350 - 500 mm

Cutting shaft speed

2660 rpm

Receiving bore bevel disk

25.4 mm

Intake side bevel disk

right or left

Direction of blade rotation

down cut

max. clamping width

10 mm

Cutting shaft drive

V-belt 3x XPZ 875 direct


manually via linkage

Drive engine output

8.7 kW at (3,600 rpm)

Drive engine model

Honda GX-390

Engine start

Recoil start

Petrol tank volume

6.1 L

Feed rate


Water tank volume

20 L

dimensions* (l / b / h)

1,200 / 610 / 1,070 mm



Rellok RSF90 Floor Saw  
Read more
Read more
Similar to
Popular now
Just for you