MARINE LED FLOODLIGHTS & SENSORS MARINE LED FLOODLIGHTS
LED LIGHTING & SOLAR SOLUTIONS
ECOLight LED has proven its durability and performance in harsh outdoor and marine environments. Featuring Cermachrome Aluminium coating or Aluminum casings and mounting brackets.
CAT NO.
LUMENS
POWER
LEDFL11-25W
2250
25W
LEDFL11-40W
3600
40W
LEDFL17-70W
7200
70W
LEDFL18-140W
11,700
140W
SENSORS – LIGHT/MOTION MOTION SENSOR: Dual Range There are two different types of motion sensor in our range 1. The on/off sensors are used to turn the lights on for a set time (between 8sec-12min) when movement is detected. 2. The 0-10V sensors work directly with our dimmable lights, perfect when turning the lights off is not an option. No movement keeps the lights at maximum dim, when movement is detected the lights immediately change to full brightness.
LIGHT SENSOR
MOTION SENSOR
Both have a selectable light level to optimise energy savings. Above the set light level, the lights will not change state on detection of movement. This feature is most suited in applications with high ambient light levels during the day, and can be disabled.
LIGHT LEVEL SENSORS This range of light level sensors offers an analogue output signal depending on light level. Used to control dimming of lights these light level sensors make any smart relay or PLC that may already be in the plant or factory into a simple, intelligent lighting controller.
FEATURES Light Setting: 0–500 lux 360º detection Range: 1–18m adjustable Power Consumption: 0.5W Max Load: 1200W Time Setting: 8sec–12min last movement detection
Our technical staff are able to assist with specific programs for smart relays to control the lights. FEATURES – LIGHT LEVEL SENSORS Supply Voltage: 24V Output Signal: 0-10V or 4-20mA Range: 0-2000lux
CAT NO.
SENSOR TYPE
INPUT
OUTPUT
SENSORAO–IN
LIGHT LEVEL
24V
0-10V / 4-20MA
SENSORAO–OUT
LIGHT LEVEL
24V
0-10v / 4-20MA
CONTROLLER
LIGHT LEVEL
230V AC
0-10v Control signal
SENSORHZ-0-10V
MOTION
230V AC
0 volts on movement /10 volts no movement
SENSORHZ-OFF-ON
MOTION
230V AC
230 volts on movement /0 volts no movement
Note: SENSORHZ is made specifically to work with the 0-10V dimming capability on the ECOLight range
178
ECO LIGHT
www.transnet.co.nz