Page 1

Rev 2:1

186E

FLANGE NECK

Powder Coated Finish

Components Code

Quantity

F

1

Bolt Kit

Description Flange Neck

Code

Quantity

A

2

12x100 Bolts, Nuts & Grip Washers

G

2

16x50 Set Screws, Nuts & Grip Washers

w493

Description

1. Loosely attach flange neck F using bolts A. 2. Loosely attach type approved towball (not supplied) using set screws G. 3. Tighten all fixings using a calibrated torque tool to the torque settings specified on the towbar drawing.

PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.

Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com

www.towsure.com


Rev 2:3

186E 186ED 186ES

Powder Coated Finish

SKODA FABIA 2 HATCHBACK & ESTATE VW POLO AUDI A1 HATCHBACK 2010-2015 e11*94/20*8311*00 w218

Components

Mainframe

Code

Quantity

CB

1

Description Crossbar

Bolt Kit Code

Quantity

Description

WA

4

10mm Large Round Washers

B

4

10x40 Bolts & Grip Washers

(Neck Type) Detachable 'D'

Please See Detachable Neck Box Contents List

Please See Detachable Neck Box Contents List

Swan Neck 'S'

Please See Swan Neck Box Contents List

Please See Swan Neck Box Contents List

Flange Neck 'F'

Please See Flange Neck Box Contents List

Please See Flange Neck Box Contents List

1.

Skoda Fabia Hatchback: Remove bumper. (Remove light clusters to reveal 2 screws under each, 2 screws on lower edge of bumper, 4 screws around each wheel arch, 2 tip screws behind each arch liner).

2.

Skoda Fabia Estate: Remove bumper. (Remove light clusters to reveal 2 screws under each, 3 plastic plugs on lower edge of bumper, 4 screws around each wheel arch, 1 tip screw behind each arch liner).

3.

VW Polo: Remove bumper. (Remove light clusters: 4 screws on bottom edge and remove 1 plastic plug in centre, 2 screws around each wheel arch, 1 tip screw behind each arch liner). Pull bumper tips outward and gently pull bumper rearwards. Remove 2 number plate light plugs by rotating anti clockwise and disconnect.

4.

Locate fixing point holes on outside of the chassis rails. (These may be covered in tape).

5.

Remove inner bumper beam and refit original bolts into panel. Insert crossbar CB into chassis and loosely attach using bolts B with washers WA. Tighten all bolts.

6.

Cut bumper as in bumper cut detail — according to vehicle type. Refit bumper, number plate lights, and light clusters.

Detachable Neck: Attach to crossbar CB using fasteners Z. Swan Neck: Attach to crossbar CB using fasteners A. Flange Neck: Attach to crossbar CB using bolts A. 7.

Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.

PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.

Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com

www.towsure.com


Rev 2:3

186E 186ED 186ES

Powder Coated Finish

SKODA FABIA 2 HATCHBACK & ESTATE VW POLO AUDI A1 HATCHBACK 2010-2015

Bolt Torque Settings Bolt Size (mm)

Pitch Torque Setting (mm) (Nm) 8.8 Tensile

5

0.80

6.09

6

1.00

10.50

8

1.25

25.30

10

1.25

46.00

10

1.50

50.90

12

1.25

83.00

12

1.50

87.81

12

1.75

87.27

14

2.00

139.00

16

2.00

213.00

PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.

Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com

www.towsure.com

186E  
186E  
Advertisement