Page 1

2016

SPRING SUMMER

BENHDS27X 27,000Lb Capacity H.D. 4 Post Lift • CE

Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493 • Supersized 12” diameter cable sheaves

27,000 LB

CAPACITY

1,770

FT./LB MAX TORQUE

IRT285B-6 1” Drive Heavy Duty Air Impact Wrench with 6” Anvil

ATEML-4034BC 74,000 LB Capacity Battery Powered, Motor Column Lift System, ALI Certified • 5-year structural warranty • 3-year warranty on electronics and hydraulics

1

B 74,000 LCAPACITY


IRTG1621 IRTG1621 IRTG1621-K2

GET THE RIGHT JOB DONE RIGHT. The Ingersoll Rand IRTG1621 IQV12 Polisher/Sander is a multi-purpose surface prep and finish tool equipped with a 2-speed gearbox and 2-inch and 3-inch backing pads to give you maximum versatility. Whether you’re sanding brake rotors, removing gaskets, polishing bumpers or restoring headlights, the 12V Multi-Tool can go where no power tool has gone before. The quick-change spindlelock eliminates the need for additional tools so you can get REAL WORK done fast and easy. Learn more at www.irtools.com/IQV12

IRTG1621 - Tool with 1 battery IRTG1621-K2 – Kit including 2 batteries and accessories

FOLLOW US. #IRTOOLS 2

IRTOOLS.COM/IQV12


SFA COMPANIES, THE INDUSTRY LEADER IN HEAVY DUTY LIFTING OMEHW93662 OMEHW93718 OMEHW93776 The highest standards of quality and performance in the industry OMEHW93806 OME22101 OME23501 OMEHW93718 OMEHW93776 OMEHW93806 OME43000 BHKBP225 BHKBPM407 1 Ton 3 Ton 3 Ton Manual Engine Stand Engine Crane Floor Style Transmission Jack

OMEHW93662 10 Ton Air/Manual Long Chassis Service Jack

• Lifting trucks, trailers, and buses by the axle, differential, or frame • Dual piston action provides speed to contact and power to lift • Long chassis for hard to reach points

• Wishbone design allows unit more mobility • Tubular steel frame • 360° swivel casters • Load restraint chain

• Clearance in 360 degree rotation • 95 to 1 worm gear drive and long handle provides easy engine rotation • Floor lock keeps stand from moving during repairs

• Installation and removal of engines, radiators, differentials, gas tanks, etc. • Roller bearings in wheels for ease of movement • Swivel hook for full rotation of load

The professional line of lifting products and shop equipment

OME22101C

OME23501

OME43000

10 Ton Long Chassis Service Jack with Air

50 Ton Air Hydraulic Truck Jack

1-1/2 Ton Floor Style Transmission Jack

• High speed Air TurboMotor is equipped to raise the load to the desired height efficiently, effortlessly, and safely • Wide stance and low center of gravity provide optimum stability under load stress

• Quick rated capacity lift using air-actuated operation • User friendly, self-returning spring minimizes operators effort, greatly reducing fatigue • The adjustable head can be tilted forward, backward and side to side for optimum alignment of transmission bolt patterns and pins • Hydraulic system is protected from internal damage by a patented by-pass mechanism

Guaranteed longevity, superior quality and innovative designs with all Taiwan manufacturing Comes with a 5 year warranty with Electronic Registration.

BHKBPM407

P L AT I N U M S E R I E S

UP TO*

year W ARRANTY

BHKBP225 P L AT I N U M S E R I E S

1 1/2 Ton Floor Style Transmission Jack • Chrome plated ram • Improved bearing surfaces • High cycle durability • Long life seals • High/low temp functionality

UP TO*

year W ARRANTY

3/4 TON QUICK LIFT MANUAL TRANSMISSION JACK • Chrome plated ram • User Selected Dual Pump Pistons • High Cycle Durability • Longer Saddle Supports • Improved bearing surfaces

Industry leading safety, all products meet ASME/PASE 2014 standards Manufacturing in USA, Taiwan, and China to meet your heavy duty lifting needs at every price point Industry leading customer service and support after the sale with repair parts in stock when you need them

www.sfacompanies.com / 1-888-332-6419 3


AIR TOOLS

3/4

INCH DRIVE

IMPACT WRENCHES

IRT2161XP 3/4” Drive Ultra Duty Extra Performance Air Impact Wrench

• Most powerful 3/4” impact in the industry • Maximum torque: 1,250 ft./lbs. • Full power reverse • 3 position power regulator • 360 degree swivel inlet

IRT2161XP-6 3/4” Drive Ultra Duty Extra Performance Air Impact Wrench with 6” Extended Anvil

• Most powerful 3/4” impact in the industry • Maximum torque: 1,250 ft./lbs. • Full power reverse • 3 position power regulator • 360 degree swivel inlet

IRT2145QIMAX 3/4” Drive Composite Impact Wrench

ACA1770-XL 3/4” Super Duty Composite Impact Wrench

• 1400 ft-lbs maximum torque • E rgonomically designed grip and handle provides ultimate user comfort • 7.4 lbs • 2 year warranty on material and workmanship with POP

• 1350 ft-lb maximum reverse torque from a tool that weighs just 7.4 lbs and is compact enough to access tight spaces

IRT259 3/4” Drive Air Impact Wrench

• Delivers 1,050 ft-lb of maximum torque in both forward and reverse • New Ergonomic design for easy two-handed operation • Two power settings in forward and reverse • Silenced exhaust reduces tool noise to only 91.6 dbA while in use

ACA1600TH 3/4” Drive Composite Impact Wrench • “Super Clutch” new patented design with ball bearings between the hammers • 1400 ft. lbs. loosening torque and 200-1400 working torque • 7.9 lbs Lightweight composite body • High performance tuned exhaust to minimize noise, dust and debris • 1 year warranty on material & workmanship

IRT261 3/4” Drive Super Duty Air Impact Wrench

• Jumbo hammer mechanism • Up to 1,100 ft./lbs. of torque • Trouble-free, longer performance aided by the Pressure-Feed Lube System • Compact and only 8.8” long • Handle exhaust

MTN7245 3/4” Drive Composite Impact Wrench • Maximum Torque is 1150 ft./lbs. in forward and 1200 ft./lbs. in reverse • Lightweight at only 7.65 lbs • 1 year warranty on material & workmanship

IRT261-3 3/4” Drive Super Duty Air Impact Wrench with 3” Anvil

IRT261-6 3/4” Drive Super Duty Air Impact Wrench with 6” Anvil

4

SUNSX4355 3/4” Drive Impact Wrench

• 1400 ft./lbs. of quiet power • One hand forward/reverse • Quiet Tech™ exhaust system delivers 90 dBA • Weighs only 7.3 lbs. • Covered under a 2 year limited warranty


3/4

Air tools

INCH DRIVE

IMPACT WRENCHES

CPT7763 Heavy Duty High Power 3/4” Drive Air Impact Wrench

CPT7763-6 3/4” Drive Heavy Duty Impact Wrench WITH 6” ANVIL

• 1200 ft./lbs. of torque • Weighs less than 12 lbs. • 6 vane motor for speed - power with any 1/2” hose air supply

CPT772H 3/4” Drive Super Duty Air Impact Wrench

• Smoothest operating 3/4” impact on the market with unmatched durability • 4 position power settings in forward and ultimate power in reverse • Handle exhaust with 360 degree air inlet swivel keeps air hose from being twisted and kinked

CPT772H-6 3/4” Drive Super Duty Air Impact Wrench WITH 6” EXTENDED ANVIL

KDT88170 3/4” Drive Premium Air Impact Wrench

• Max Breakaway Torque 1800 ft-lb • Impacting mechanism with Advanced Triple Cycle Heat Treatment • One-hand push button Forward/Reverse; preferred by technicians • Variable-speed trigger for precise control • 2 year warranty • Impacting Sound Level* - dB(A) 90.4

CDOHDPRO

5


AIR TOOLS

1

INCH DRIVE AIR IMPACT WRENCHES

CPT797 1” Drive Super Duty Impact Wrench

• Truck tire tool of choice • Long known as the workhorse of the truck tire industry • Rocking dog clutch for smooth operation and extreme durability • Choice of professional mechanics for high volume tire work on trucks, buses and heavy equipment

CPT7782-SP6 1” Drive Heavy Duty Impact Wrench with 6” Extension and #5 Spline • 2,140 ft.lbs - of maximum torque in reverse • Pinless closed reinforced rocking dog impact mechanism • Socket retainer ring combined with hole retainer • Full teasing trigger • Regulator with integrated forward/reverse with 3-position power settings in both directions

CPT797-6 1” Drive Super Duty Impact Wrench with 6” ANVIL

CPT7780-6 1” Drive Lightweight Impact Wrench with 6” Extension

• EXTRA LIGHT: 17 Lbs. - less fatigue thanks to an aluminum housing • POWERFUL: 1700 ft.lbs of maximum torque in reverse • USEFUL: 4 positions power setting in both directions and on both sides of the tool • VERSATILE: Socket retainer ring combined with hole retainer • PRECISE CONTROL: Double stage trigger, inside for safe operation in tight areas

CPT894 1” Drive Heavy Duty Air Impact Wrench

• Oil bath clutch for smooth operation and extended durability • One hand push button forward/reverse power regulator - 3 positive power settings in forward and ultimate power in reverse • Maximum torque: 1,700 ft./lbs. • Adjustable side handle for support • Ideal for spring work, tractor pad removal and off road equipment

CPT7778-6 1” Drive Impact Wrench with 6” Anvil

• 1,450 ft-lbs. torque provides power to loosen rusted bolts • High performance clutch provides longer life under tough conditions • High efficiency 6 vane motor for maximum performance • Bottom exhaust directs exhaust away from the operator • Three position power regulator with directional control

CPT7773 1” Drive Heavy Duty Impact Wrench

• 1,200 ft/lbs of ultimate torque providing power to loosen the toughest fastener • Twin Hammer high performance clutch for longer life under tough conditions • Efficient 6 Vane Motor - power with any 1/2” hose air supply • 3 Position regulator and directional control - one lever for all controls with three positions in forward and full power reverse

CPT7782-6 1” Drive Heavy Duty Impact Wrench with Extended Anvil • 2,140 ft.lbs - of maximum torque in reverse • Regulator with integrated forward/reverse with 3-position power settings in both directions

6


Air tools

1

1 inch driveAIR IMPACT WRENCHES INCH DRIVE

IRT2171XP 1” Drive Ultra Duty Impact Wrench

IRT271 1” Drive Super Duty Air Impact Wrench

• Impressive power-to-size ratio • Up to 1,100 ft./lbs. of torque • Pressure-feed lube system for longer service life • Dead handle improves operator control • Free-speed 5,500 RPM

IRT2155QIMAX AIR IMPACT WRENCH 1” 2000FT-LB

• 1350 ft-lb (1830Nm) maximum reverse torque from a tool that weighs just 7.4lbs (3.36kg) and is compact enough to access tight places

• High power to weight ratio • Maximum torque: 1,250 ft./lbs • Full power reverse • 3 position power regulator • 360 degree swivel inlet

IRT2190TI 1” Drive Titanium Impact Wrench

• Perfect for applications where high-quality is essential • Reduced vibration • Maximum torque: 1,600 ft./lbs. • Free speed: 6,800 RPM Working torque: 150-1,200 ft./ lbs.; Average air consumption: 12 CFM; Air inlet size: 1/2”; sound dBA: 103.0/117.0; minimum hose size: 1/2”; weight: 13.5 lb.; length: 21.5.

IRT2190TI-6 1” Drive Titanium Impact Wrench with 6” Extended Anvil IRT290 1” Drive Super Duty Air Impact Wrench

• Designed for getting intocramped spaces with big power, the IRT290 has a three-way adjustable handle • It’s a good choice for spring work, tractor pads, bus maintenance, and off-road and farm equipment • Up to 1,600 ft/ lbs. of torque • Pressure-feed lube system for long life • Adjustable side handle for better control

IRT293 1” Drive Super Duty Air Impact Wrench

• Perfect for applications where high-quality is essential • Reduced vibration • Maximum torque: 1,600 ft./lbs. • Free speed: 6,800 RPM • Extended robust anvil bushing provides long life under heavy shop usage

IRT285B 1” Drive Heavy Duty Impact Wrench

• High efficiency, 6 vane air motor • 1,450 ft./lbs of maximum torque with a 5,000 rpm free speed • 3 position power regulator • Includes protective boot kit

• Up to 2,000 ft.-lbs. of torque • Most powerful 1” wrench • Long-lasting tool • Handle exhaust

IRT285B-S6 Air Impact 1” Sline Drive IRT295A 1” Drive Heavy Duty Air Impactool™

• Delivers 1,770 ft./lbs. maximum torque at 120 PSI with 5,250 rpm free speed and a high efficiency 6 vane motor • Fast torque delivers 1,000 ft./lbs. in 2 seconds • Handle exhaust directs air away from the work • Top mounted dead handle provides great leverage for difficult underbody work • 3 position power regulator provides torque management

• 1” 27.8 lb Impactool • 1,475 ft-lb Max Torque • 6” Spline Drive Anvil

IRT285B-6 1” Drive Heavy Duty Air Impact Wrench WITH 6” ANVIL

• Maximum torque: 1,770 ft./lbs. • New Fast-Torque feature delivers 1,000 ft./lbs. in 2 seconds • New increased pressure rating can withstand 120 PSI for better durability • Improved feather-touch trigger • Free chemical resistant protective boot helps prevent damage 7


air tools

1

INCH DRIVE

KTI81795 1” Drive Air Impact Wrench with 13 Piece SAE Socket Set

AIR IMPACT WRENCHES

MTN7190-6 1” Mini 6” Extended Anvil Impact Wrench

• Smallest impact wrench on the market • Lightest impact wrench on the market at 14 lbs. • Most compact impact wrench on the market • 1600 ft-lbs of torque • Fits into tight working areas

• 1500 ft./lb. ultimate torque • 3500 rpm • 8 cfm air consumption • 90 PSI air pressure (recommended)

KTI’s air tools are designed for reliability and superior performance. Includes 13-piece 1” drive short fractional impact socket set including sizes 3/4” to 3” (KTI-35113).

SUNSX556-6 1” Drive Impact Wrench with 6” Extended Anvil

• 1,600 ft.lbs. of torque • Only 24.5 lbs of weight, lightest in its class • Lower vibration and long last operation • Three forward and three reverse speeds

SAWS, GRINDERS, HAMMERS, SCALERS

CPT7125 Pistol Needle Scaler

CPT7110K Heavy Duty Air Hammer Kit

• General purpose needle scaler •R  ubber sleeve on handle for better comfort •D  elivered with 2 sets of needles: 19 x 1/8” (3 mm) and 29 x 5/64” (2 mm) for finer usage • Ideal for surface clean-up work • Great for rust or paint removal

• Includes (1) quick change retainer, (4) chisels, and heavy duty carrying case • Vibration isolation system for smoother operation and greater comfort

Air Hammers - Low Vibration • MAX Comfort: Anti-vibration feature reduces vibration by 30% over standard air hammers

IRT429 Heavy Duty Reciprocating Air Saw

• Excellent for body shop repair, muffler and exhaust work, and sun roof installations • Reduced vibration • Cuts flat and curved surfaces

IRT3445MAX 4.5” Wheel Heavy Duty Air Angle Grinder

•Featuring a mighty 0.88 horsepower motor this grinder has a best-in-class power-to-weight ratio • MAX safety: internal to the tool is a governor, a device used to prevent an over-speed condition and to maximize the speed of the tool while under load, protecting the operator during use • Built-in lubricating wick optimizes the life of the angle gear set by improving lubrication to the pinion and bevel gear set

IRT345MAX 5” Wheel Heavy Duty Air Angle Grinder 8

IRT122MAXK Short Barrel Kit

• 3,500 blows per minute • Quick change retainer, (5) chisels and carry case included

IRT118MAXK Long Barrel Kit

• 2,500 blows per minute • Quick change retainer, (5) chisels and carry case included

IRT125 Standard Duty Needle Scaler • 19 needles • Each needle: 1/8” (3.2mm) • 4,600 blows per minute at free speed


Most Complete Line ACDARM313-2A ACDARM315-3A ACDARM317-4A ACDARM303-4A ACDARM319-6A ACDARM321-6A ACDARM323-8A ACDARM329-4I ACDARM327-3I ACDARM325-2I ACDARM331-2I ACDARM601-3 ACDARM601-4 ACDARM605-4 ACDARM602-3 ACDARM602-4 ACDARM302-4S

9


cordless tools

MLW2720-21 M18™ FUEL™ Sawzall Kit with 1 Battery

• Superior performance: Delivers the fastest cutting speed in its class, increased power and the durability of corded saws • POWERSTATE™ Brushless Motor: Supplies constant power for faster cuts and reduced heat for extended life Includes: M18™ REDLITHIUM™ XC 4.0 Extended Capacity battery pack, M18™ and M12™ multi-voltage charger, blade and carrying case

MLW2764-22 M18™ FUEL™ 3/4” High Torque Impact Wrench Kit

• 750 ft-lbs of maximum fastening torque, up to 1,200 ft-lbs of nut-busting torque • P OWERSTATE™ Brushless Motor: Outpowers competitors yet runs cooler with no wearable components

MLW2764-20 M18™ FUEL™ 3/4” High Torque Impact Wrench (Bare Tool) MLW2780-21 M18™ FUEL™ 4-1/2” Grinder with Paddle Switch (1 Battery)

MAKXAG03M 4-1/2” 18V LXT® BL™ Brushless Motor Cut-Off/Angle Grinder Kit

• POWERSTATE™ Brushless Motor: delivers maximum power and up to 10X longer motor life Includes: M18™ REDLITHIUM™ XC4.0 Extended Capacity Battery Pack, M18™ and M12™ multi-voltage charger and a carrying case

3/4

INCH DRIVE

• BL™ Motor delivers 8,500 RPM • The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life

IMPACT SOCKET SETS

• Forged from the finest chrome molybdenum alloy steel – the best choice for strength and durability • Radius corner design - to extend the life of fasteners 17 Piece 3/4” Drive 6 Point Heavy Duty Impact Socket Sets

• Industrial strength, double latch blow molded case

SUN4683 - SAE Set contains: 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-9/16”, 1-5/8”, 1-11/16”, 1-3/4”, 1-13/16”, 1-7/8”, 1-15/16” and 2” SUN4684 - Metric Set contains: 26mm, 27mm, 28mm, 29mm, 30mm, 32mm, 33mm, 35mm, 35mm, 38mm, 40mm, 41mm, 42mm, 43mm, 44mm, 45mm and 46mm

29 Piece 3/4” Drive 6 Point SAE Impact Socket Sets

• Includes heavy duty blow molded case - over 30” tall • Includes wheel kit and grip handle for easy maneuvering Set contains: 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-9/16”, 1-5/8”, 1-11/16”, 1-3/4”, 1-13/16”, 1-7/8”, 1-15/16”, 2”, 2-1/16”, 2-1/8”, 2-3/16”, 2-1/4”, 2-5/16”, 2-3/8”, 2-7/16” and 2-1/2”

SUN4696 - Standard SUN4695 - Deep (Freight Delivery)

17 Piece 3/4” Drive 6 Point Deep Impact Socket Sets

• Included in a heavy-duty blow mold case

SUN4685 - SAE Set contains: 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-9/16”, 1-5/8”, 1-11/16”, 1-3/4”, 1-13/16”, 1-7/8”, 1-15/16” and 2”

5 Piece 3/4” Drive Hex Impact Socket Sets

SUN4686 - Metric

Set contains: 3/4”, 7/8”, 1”, 1-1/8” and 1-1/4”

Set contains: 26mm, 27mm, 28mm, 29mm, 30mm, 31mm, 32mm, 33mm, 35mm, 36mm, 38mm, 39mm, 40mm, 41mm, 42mm, 43mm and 44mm 10

• Included in a heavy-duty blow mold case

SUN4506 - SAE

SUN4507 - Metric

Set contains: 14mm, 17mm, 19mm, 22mm and 24mm


3/4 INCH DRIVE

Impact Sockets IMPACT SOCKET SETS

• Manufactured from heat-treated chrome-moly steel for wear in professional, rugged environments • Laser engraved for quick identification

KTI34101 12 Piece 3/4” Drive 6 Point SAE Impact Socket Set

KTI34100 8 Piece 3/4” Drive 6 Point SAE Impact Socket Set

Set includes sizes: 1-9/16” to 2-3/8”.

KTI34200 8 Piece 3/4” Drive 6 Point Deep SAE Impact Socket Set

Set includes sizes: 1” thru 1-1/2”.

KTI39100 15 Piece 3/4” Drive 6 Point Thin-Wall Short Metric Impact Socket Set

Set includes sizes: 1” to 1-1/2”.

KTI34201 8 Piece 3/4” Drive 6 Point Deep SAE Impact Socket Set

• Packaged in a convenient blow-molded case • Lifetime warranty Set includes: 17mm - 46mm

Set includes sizes: 1-9/16” to 2”.

• Made of high quality steel (chrome-molybdenum) • Engineered specifically for use with impact tools, using the most up to date industrial specifications • Made to transfer the pressure from the thinnest part of the socket wall toward the thicker section, resulting in increased strength • Lifetime Warranty

14 Piece 3/4” Drive SAE Impact Socket Set

• Packaged in a molded storage case Set contains: 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2 and 1-5/8”

GRE8038D - Deep GRE8038 - Standard 8 Piece 3/4” Drive Metric Impact Socket Set

• Packaged in a molded storage case Set contains: 26mm, 27mm, 29mm, 30mm, 32mm, 35mm, 36mm and 38mm

GRE8134MD - Deep GRE8134M - Standard

29 Piece 3/4” Drive SAE Impact Socket Set 8 Piece 3/4” Drive SAE Impact Socket Set

• Packaged in a molded storage case Set contains: 1”, 1-1/16”, 1-1/8”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, and 1-1/2”

• Packaged in a molded storage case Set contains: 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-9/16”, 1-5/8”, 1-11/16”, 1-3/4”, 1-13/16”, 1-7/8”, 1-15/16”, 2”, 2-1/16”, 2-1/8”, 2-3/16”, 2-1/4”, 2-5/16, 2-3/8”, 2-7/16”, and 2-1/2”

GRE8029D - Deep GRE8029 - Standard

GRE8034D - Deep GRE8034 - Standard

26 Piece 3/4” Drive Metric Impact Socket Set -Standard GRE8313 13 Piece 3/4” Drive SAE Impact Socket Set - 12 Point

• Sockets are included in a molded storage case Set contains the following sizes: 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-1/4”, 1-3/8”, 1-1/2”, 1-5/8”, 1-3/4”, and 1-7/8”.

• Packaged in a metal case Set contains: 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 25mm, 26mm, 27mm, 28mm, 29mm, 30mm, 31mm, 32mm, 33mm, 34mm, 35mm, 36mm, 38mm, 40mm, 41mm, 42mm, 43mm, 44mm, 46mm, 50mm

GRE8026MD - Deep GRE8026M - Standard 11


Impact Sockets

1

INCH DRIVE

IMPACT SOCKET SETS

• Made of high quality steel (chrome-molybdenum); thorough and exact heat treatment insures the correct balance of strength and durability • Engineered specifically for use with impact tools, using the most up to date industrial specifications • Made to transfer the pressure from the thinnest part of the socket wall toward the thicker section, resulting in increased strength • Lifetime Warranty

GRE9109D 8 Piece 1” Drive Deep Impact Socket Set

• Packaged in a metal case Set contains: 7mm, 30mm, 32mm, 33mm, 35mm, 36mm, 38mm and 41mm

GRE9116 16 Piece 1” Drive SAE Impact Socket Set - 12 Point (Freight Delivery)

• Comes in a high quality metal case Set includes sizes: 2-1/16”, 2-1/8”, 2-3/16”, 2-1/4”, 2-5/16”, 2-3/8”, 2-7/16”, 2-1/2”, 2-9/16”, 2-5/8”, 2-11/16”, 2-3/4”, 2-13/16”, 2-7/8”, 2-15/16” and 3”.

21 Piece 1” Drive SAE Impact Socket Set 8 Piece 1” Drive SAE Impact Socket Set

• Packaged in a molded storage case Set contains: 7/8’’, 15/16’’, 1’’, 1-1/16’’, 1-1/8’’, 1-3/16’’, 1-1/4’’ and 1-1/2’’

GRE9108D -Deep GRE9108 - Standard

• Packaged in a metal case Set contains: 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-9/16”, 1-5/8”, 1-11/16”, 1-3/4”, 1-13/16”, 1-7/8”, 1-15/16” and 2”

GRE9021D - Deep GRE9021 - Standard

GRE9159 9 Piece 1” Drive 6 Point Jumbo Fractional Impact Socket Set • Packaged in a metal case Set contains: 1”, 1-1/8”, 1-1/4”, 1-3/8”, 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8” and 2”

GRE9111 1” Drive 12 Point Fractional Impact 11 Piece Set

• Contains 12-point sizes 3-1/8” to 4-1/2” • Contains 11 pieces • 1” Drive • Metal Storage Case • Weight: 148.6 lbs

16 Piece 1” Drive SAE Impact Socket Set

• Packaged in a metal case Set contains: 2-1/16”, 2-1/8”, 2-3/16”, 2-1/4”, 2-5/16, 2-3/8”, 2-7/16”, 2-1/2”, 2-9/16”, 2-5/8”, 2-11/16”, 2-3/4”, 2-13/16”, 2-7/8”, 2-15/16” and 3”

GRE9016D - Deep (Freight Delivery) GRE9016 - Standard 12

GRE9026M 26 Piece 1” Drive Metric Impact Socket Set

• Complete with high quality metal case Set includes sizes: 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 25mm, 26mm, 27mm, 28mm, 29mm, 30mm, 31mm, 32mm, 33mm, 34mm, 35mm, 36mm, 37mm, 38mm, 39mm, 40mm, 41mm, 42mm, 43mm, and 44mm.

21 Piece 1” Drive SAE Impact Socket Set - 12 Point • Packaged in a metal case Set contains: 3/4”, 13/16”, 7/8”, 15/16”, 1’’, 1-1/16’’, 1-1/8’’, 1-3/16’’, 1-1/4’’, 1-5/16’’, 1-3/8’’, 1-7/16’’, 1-1/2’’, 1-9/16’’, 1-5/8’’, 1-11/16’’, 1-3/4’’, 1-13/16’’, 1-7/8’’, 1-15/16’’ and 2’’

GRE9121D - Deep GRE9121 - Standard


1

Impact Sockets

INCH DRIVE

IMPACT SOCKET SETS

No doubt, Sunex Tools offer one of the most complete and toughest Impact Socket lines around. These 1” drive impact socket sets are designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also each socket features a radius corner design, causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners, resulting in less wear on the fastener.

21 Piece 1” Drive 6 Point SAE Impact Socket Sets

• Forged from the finest chrome molybdenum alloy steel– the best choice for strength and durability • Fully guaranteed • Included in a heavy-duty blow mold case - over 30” tall • Includes wheel kit and grip handle for easy maneuvering Set contains: 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-9/16”, 1-5/8”, 1-11/16”, 1-3/4”, 1-13/16”, 1-7/8’, 1-15/16” and 2” SUN5692 - Standard SUN5693 - Deep

SUN5697M 7 Piece 1” Drive 6 Point Metric Deep Impact Socket Set

• Chrome molybdenum alloy steel for long life • Industrial strength, double latch blow molded case Set contains: 5 deep sockets 27mm, 33mm, 25mm, 26mm, 41mm; 2 square sockets 17mm and 21mm

SUN5699 9 Piece 1” Drive Standard SAE Jumbo Impact Socket Set • Chrome molybdenum alloy steel for long life • Designed with radius corners, this allows it to grab the sturdy wall of the fastener instead of grabbing the corners • Industrial strength, double latch blow mold case Set contains: 1”, 1-1/8”, 1-1/4”, 1-3/8”, 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, and 2”.

SUN5681 8 Piece 1” Drive 6 Point Deep SAE Impact Socket Set

• Chrome molybdenum alloy steel for long life • Designed with radius corners, this allows it to grab the sturdy wall o f the fastener instead of grabbing the corners • Industrial strength, double latch blow mold case Set contains: 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4” and 1-1/2”

6 Piece 1” Drive Impact Hex Driver Set

• Forged from the finest chrome molybdenum alloy steel – the best choice for strength and durability • Included in a heavy-duty blow mold case

SUN5606 - SAE Set contains: 3/4”, 7/8”, 1”, 1-1/8”, 1-1/4” and 1-3/8” SUN5607 - Metric Set contains: 14mm, 17mm, 19mm, 22mm, 24mm and 27mm

SKT88819 19 Piece 1” Drive 6 Point DEEP Impact Socket Set

• Improved black coating retains more rust preventative compound than black oxide • Neck down design provides improved access over tapered design • SureGrip® hex design drives the side of the fastener, not the corner • Made in the U.S.A. • Lifetime warranty

KTI35100 18 Piece 1” Drive Short Fractional Impact Socket Set

• Capable of handling larger applications • Manufactured from heat-treated chrome-moly steel • All sockets are laser engraved for quick identification • Packaged in a convenient blow-molded case • Lifetime warranty KTI’s 18-piece 1” drive impact socket set includes fractional sockets sized 3/4” to 2”; 7” and 13” extensions and replacement o-rings and pins. This set is capable of handling larger applications, such as removal of truck wheels and lug nuts. KTI sockets are designed to perform consistently and withstand even the most heavy-duty applications. Manufactured from heat-treated chrome-moly steel for wear in professional, rugged environments. All sockets are laser engraved for quick identification. 13


Impact Sockets

3/4 INCH DRIVE

WHEEL SERVICE IMPACT SOCKET SETS

• Made of high quality alloy steel (chrome-molybdenum) • Tested to the highest specifications to deliver outstanding performance at the competitive cost • Lifetime Warranty

GRE8030 9 Piece 3/4” Drive Truck Wheel Set

• Packaged in a metal case Set contains: Standard: 3/4”, 7/8” and 1”; Thin Wall Deep: 1-1/16”, 1/18” and 1-1/4”; Metric: 33mm; Deep: 1-1/2”; 4-Point Square: 13/16”

GRE8032 11 Piece 3/4” Drive Truck Wheel Service Set • Packaged in a metal case Set contains: Deep: 3/4”, 13/16”, 7/8”, 1”, 1-3/16”; Thin Wall Deep: 1-1/16”, 1-1/8”, 1-1/4”; Metric Deep: 33mm; Deep Length Budd: 1-1/2”; 4-Point Square: 13/16”

GRE8040 5 Piece 3/4” Drive Wheel Service Set

• Sockets are included on a metal rail Set contains: 6 point sizes: Metric Deep: 33mm; Deep: 1-1/8”, 1-1/4”, 1-1/2”; and 4-Point Square: 13/16”

GRE8153 10 Piece 3/4” Drive 4 and 6 Point Fractional and Metric Wheel Service Impact Socket Set • Lifetime Warranty Set contains: 6-Point sizes 1-1/16”, 1-1/8” and 1-1/4” thin-wall deep; 1-1/2” deep budd; 33mm, 35mm and 41mm deep; 4-Point sizes 13/16”, 17mm and 21mm square

GRE8133 11 Piece 3/4” Drive DEEP 4 and 6 Point Metric Wheel Service Impact Socket Set

• Packaged in a metal case Set contains: 27mm, 30mm, 32mm, 33mm, 35mm, 36mm, 38mm, 41mm in deep length and 4 Point (Square) sizes 17mm, 20mm and 21mm in standard length

GRE8370 7 Piece 3/4” Drive Truck Pinion Locknut Set

• Extra-thin wall deep length impact sockets for removing/ installing transmission and differential end yoke locknut’s • Can be used on a wide variety of trucks • Packaged in a metal case • Use caution and follow the manufacturer’s recommendations when servicing these parts • Lifetime Warranty Set contains: 2”, 2-1/8”, 2-1/4”, 2-3/8”, 2-1/2”, 2-5/8” and 2-3/4”

• Forged from the finest chrome molybdenum alloy steel – the best choice for strength and durability • Radius corner design - to extend the life of fasteners

SUN4682 11 Piece 3/4” Drive Truck Service Impact Socket Set

• Comes in an industrial strength, double latch blow molded case Set contains: 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-1/2” standard sockets and a 13/16’ square socket

SUN4011M 11 Piece 3/4” Drive Deep Metric Truck Impact Socket Set

• Comes in an industrial strength, double latch blow mold case Set includes: 8 deep sockets: 27mm, 30mm, 32mm, 33mm, 35mm, 36mm, 38mm, 41mm; 3 Square Sockets: 17mm, 20mm, 21mm.

SUN4050 5 Piece 3/4” Drive SAE and Metric Wheel Service Impact Socket Set

• Comes in an industrial strength, double latch blow mold case Set includes: 4 deep sockets, 1-1/16”, 1-1/4”, 1-1/2” and 33mm; and 1 square socket, 13/16”

SUN4050M 5 Piece 3/4” Drive Metric Wheel Service Impact Socket Set

• Comes in an industrial strength, double latch blow mold case Set includes: 2 standard sockets, 27mm and 30mm; 2 deep sockets, 33mm and 35mm and 1 square socket, 17mm.

SUN4070M 7 Piece 3/4” Drive 6 Point Metric Deep Truck Service Impact Socket Set

• Comes in an industrial strength, double latch blow mold case Set includes: 5 deep sockets 27mm, 30mm, 33mm, 35mm, 41mm; and 2 square sockets 17mm and 21mm

SUN4667 7 Piece 3/4” Drive Truck Pinion Locknut Impact Socket Set

• For removing or installing transmission and differential end yoke lock nuts on most trucks • Set includes: 2”, 2-1/8”, 2-1/4”, 2-3/8”, 2-1/2”, 2-5/8” and 2-3/4”.

3/4” Drive Square Impact Sockets 3/4” Drive 6 Point Pinion Locknut Sockets

• Socket is built to have the correct clearance for yoke and locknut assemblies on a variety of truck transmissions and differentials • Socket has 3” of usable depth and is 4” long • This socket is designed for use with 3/4” square drive manual tools only • Resist rounding out OTC1976 - 2-1/8” OTC1977 - 2-1/4” OTC1979 - 2-5/8” OTC1980 - 2-3/4” 14

• Forged from the finest chrome molybdenum alloy steel – the best choice for strength and durability • Radius corner design - to extend the life of fasteners • The design drives the side of the fastener instead of the corner • Provides increased strength, but also avoids rounding of rusted or damaged fasteners SUN419MS - 19mm SUN420MS - 20mm SUN421MSS - 21mm Double Square SUN426HDS - 12/16” SUN426S - 13/16”


Impact Sockets

1

INCH DRIVE

WHEEL SERVICE IMPACT SOCKET SETS

• Forged from the finest chrome molybdenum alloy steel – the best choice for strength and durability • Radius corner design - to extend the life of fasteners

SUN5685 5 Piece 1” Drive 6 Point SAE and Metric Wheel Service Impact Socket Set • Included in an industrial strength, double latch blow mold case Set contains: 2 deep sockets 1-1/2” and 33mm; 2 deep thin wall sockets 1-1/8” and 1-1/4”; 1 square socket 13/16”.

SUN5690A 10 Piece 1” Drive SAE / Metric Heavy Duty Wheel Impact Socket Set

• Comes standard with blow molded case Set contains: Deep-33mm, 1”, 1-3/16”,13/4”; Thin wall deep-1-1/16”, 1-1/8”, 1-1/4”; Square-13/16”, 15/16”; Controlled depth-1-1/2”.

• Made of high quality alloy steel (chrome-molybdenum) • Tested to the highest specifications to deliver outstanding performance at ­the competitive cost • Lifetime Warranty

SUN5688 8 Piece 1” Drive SAE and Metric Wheel Service Impact Socket Set

• Included in an industrial strength, ­double latch blow mold case Set contains: 3 standard sockets, sizes 7/8”, 1” and 33mm; 3 deep thin wall sockets, sizes 1-1/16”, 1-1/8” and 1-1/4”; 1 square socket size 13/16” and 1 controlled depth socket size 1-1/2”.

GRE9007 7 Piece 1” Drive Truck Wheel Set

• Packaged in a molded storage case Set contains: Standard 4 Point Square: 13/16”; Standard: 1-3/16”; Thin Wall Deep: 1-1/16”, 1-1/8”, 1-1/4”; Metric Deep: 33mm

GRE9151 10 Piece 1” Drive Heavy Duty Wheel Service Set

GRE9155 7 Piece 1” Drive Metric Wheel Service Set

• Packaged in a metal case Set contains: 6-Point sizes include 30mm, 33mm, 35mm 38mm and 41mm Deep. 4-Point sizes include 17mm and 21mm Square.

• Packaged in a metal case Set contains: 6 point sizes: Thin Wall Deep: 1-1/16”, 1-1/8”, 1-1/4”; Fractional Deep: 1”, 1-3/16”, 1-1/2”, 1-3/4”; Metric Deep 33mm and 4-point Fractional Standard Square: 13/16” and 15/16”

GRE9152 10 Piece 1” Drive Wheel Service Set

• Packaged in a molded storage case Set contains: 6 point sizes: 7/8”, 15/16”, 1” and 1-3/16” standard length; 33mm deep; 1-1/16”, 1-1/8” and 1-1/4” Thin Wall Deep; 1-1/2” Deep Budd; 4-Point : 13/16” square

GRE9157 11 Piece 1” Drive Metric Wheel Service Set

• Packaged in a metal case Set contains: 27mm, 30mm, 32mm and 33mm standard, 35mm, 36mm, 38mm and 41mm Deep, 17mm, 20mm and 21mm Square.

GRE9153 10 Piece 1” Drive Wheel Service Set

• Packaged in a molded storage case Set contains: 6-Point sizes include: 1-1/16’, 1-1/8’ and 1-1/4’ Thin Wall Deep; 1-1/2’ Deep Budd; 33mm, 35mm and 41mm Deep. 4-Point sizes include: 13/16’, 17mm and 21mm square

GRE9154 8 Piece 1” Drive SAE Wheel Service Set GRE9161D 9 Piece 1” Drive Large Truck/OTR Set

• Packaged in a molded storage case Set contains: 6-Point sizes include: 7/8”, 1” and 33mm Standard length; 1-1/16”, 1-1/8” and 1-1/4” Thin Wall Deep; 1-1/2” Deep. 4-Point size: 13/16” Square.

• Packaged in a metal case Set contains: 6-Point sizes include: 33mm, 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, 2” and 2-1/4” Deep. 4-Point sizes include: 13/16” and 15/16” Square. 15


Impact Sockets

BUDD WHEEL IMPACT SOCKETS Manufactured from heat-treated chrome-moly steel for wear in professional, rugged environments.

KTI39233 3/4” Drive 6 Point Deep Impact Budd Wheel Socket, 33mm Designed for outer cap nuts on Budd style truck wheels.

KTI34026 3/4” Drive Deep Budd Wheel Impact Socket, 13/16” Square

SUN5626 5 Piece 1” Drive Combination Budd Wheel Impact Socket Set

Designed for outer cap nuts on Budd style truck wheels

Set contains: 4 Square Budd Wheel Sockets: 1-1/2” x 13/16”, 35mm x 17mm, 38mm x 20mm, 41mm x 21mm and 1 Deep Socket: 33mm

1” Drive Combination Budd Wheel Impact Sockets SUN54121 - 41mm x 21mm SUN5826C - 1-1/2” x 13/16”

KTI34027 3/4” Drive Deep Budd Wheel Impact Socket, 13/16” Square x 1-1/2” Hex Designed for outer cap nuts on Budd style truck wheels. For most Americanmade trucks with dual rear wheels.

KTI35005 5 Piece 1” Drive Budd Wheel Service Kit

3/4” Drive Combination Budd Wheel Impact Sockets SUN4826C - 1-1/2” x 13/16” SUN4121C - 41mm x 21mm

• Metric sizes for Isuzu, Hino, Mitsubishi, Fuso, White Volvo, Mack Midliner and other imports • Fractional size for all U.S.A. made trucks • Fits both front and rear axle wheel, single and dual Set includes 33mm, 36mm, 38mm, 41mm and 1-1/2” hex.

1” Drive Budd Wheel Sockets

1” Drive 6 Point Impact Budd Wheel Sockets KTI35233 - 33mm Deep KTI35235 - 35mm Deep KTI35026 - 13/16” Shallow KTI35027 - 13/16” Square and 1-1/2” Hex Limited KTI35028 - 13/16” Square and 1-1/2” Hex

• Their extra deep design lets you remove both nut and stud with just the one socket OTC1947A – 41 mm Hex Socket OTC1948A – 33 mm Hex Socket Metric sizes for Isuzu, Hino, Mitsubishi Fuso, and import trucks; fit front and rear axle wheels. OTC1949A – 1-1/2” Hex Socket For American-made trucks with dual rear wheels.

IMPACT SOCKET

ACCESSORIES

SUN4304 3/4” Drive Universal Joint SUN5304 1” Drive Universal Joint • Forged from the finest chrome molybdenum alloy steel – the best choice for strength and durability • Radius corner design - to extend the life of fasteners • The design drives the side of the fastener instead of the corner • Provides increased strength, but also avoids rounding of rusted or damaged fasteners

1” Drive Adapters

• Ball/swivel action universal joints give sockets access to tight areas

• Re-engineered to dramatically increase durability • Virtually unbreakable SUN5305 - 1” Female x 3/4” Male

KTI34016 3/4” Female 1/2” Male Impact Socket Adapter

SUN4300 3/4” Female to 1” Male Impact Socket Adapter

KTI34032 3/4” Female 1” Male Impact Socket Adapter

SUN4305 3/4” Drive 3/4” Female x 1/2” Male Adapter

KTI35024 1” Female 3/4” Male Impact Socket Adapter

• Re-engineered to dramatically increase durability - virtually unbreakable

SUN5303 1” Drive 1” Female x 3/4” Male Impact Socket Adapter 16

KTI34050 3/4” Drive Impact Universal Joint


hand tools ADJUSTABLE

Adjustable Wrenches

• Longer jaws grip better, avoiding slippage or nut round off • Measurement scales (in. on front; mm on reverse) are handy for sizing nuts, pipe and tube diameters • Greater jaw capacity supports larger nuts and bolts • T hinner jaws for greater access in tight spaces • Precise jaw design grips tight the first time every time

CHA815 (15”) CHA818 (18”) CHA824 (24”)

WRENCHES

CROWFOOT

SUNEX Crowfoot Wrench Sets • Fully polished drop forged alloy steel • Reusable blow molded storage tray

Basic doesn’t have to be ordinary. Bringing you an exciting range of resources, Sunex hand tools put a new spin on handling fasteners. With the design and strength to work in most any situation, these tools will be right with you all of the way. There’s no sacrifice, you have strength and comfort!

SUN9720 - 7 Piece

•Set includes: 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-3/8, 1-1/2”

SUN9722 - 6 Piece

• Set includes: 1-5/8, 1-3/4, 1-7/8, 2, 2-1/8, 2-1/4”

SUN9740 7 Piece Jumbo Metric Straight Crowfoot Wrench Set

• Fully polished drop forged alloy steel • Mounted on storage rail for convenience • Also available individually • Set includes: 34mm, 35mm, 36mm, 38mm, 41mm, 42mm and 46mm

PIPE

WRENCHES

CHAIN

Aluminum Pipe Wrenches

Ratcheting Chain Wrenches

KTI49124 24” Aluminum Pipe Wrench Jaw Capacity: 3-1/2”

OTC7401

KTI49136 36” Aluminum Pipe Wrench Jaw Capacity: 4”

• 13” handle with capacity from 1/2” to 4-3/4” O.D. • Weight: 2lbs., 5oz.

• Cast aluminum housings make these wrenches considerably lighter and easier to handle than cast iron wrenches • Drop forged steel jaws

• Head design permits turning in either direction without removing wrench from the work • Ratcheting action also makes it possible to re-grip without removal • Handles parts of most any shape, round, square, hexagon, octagon • 19” handle with capacity from 3” to 6-3/4” O.D. • Weight: 5lbs., 3oz.

OTC7400

Pipe Wrenches

• Strong, durable and versatile • Constructed from the highest grade cast iron with drop forged steel jaws • Tough red enamel finish • 1-1/2” capacity

KTI49024 - 24” Pipe Wrench KTI49036 - 36” Pipe Wrench

CRSCW24 Crescent 24” Chain Wrench

• Double action allows use in either direction • Designed for confined areas when ordinary pipe wrenches will not fit • Excellent for pipe fittings • Concave cut teeth for improved gripping; easily resharpened if needed • Chrome plated to resist rust

17


hand tools NON-RATCHETING

Fractional Service Wrench Sets

WRENCHES

SUN9604 4 Piece Raised Panel SAE Combination Wrench Set

• Thin jaws with a short handles • Drop forged alloy steel • Fully polished • Include storage pouches • Popular for trucking, auto mechanics and industrial market

• High density, dropped forged steel for strength and comfort • Raised panel design • Comes with sturdy metal clip for storage • Wrenches guaranteed • Available individually

V8T9212 - 12 Piece Jumbo, 1-11/16 to 2-5/8” V8T9215 - 15 Piece, 3/4” to 1-5/8”

Set includes: 2-1/8”, 2-1/4”, 2-3/8”, and 2-1/2”

V8 Tools Angle Head Combination Wrench Sets • Drop forged alloy steel • Fully polished • Lifetime warranty

V8T214 14 Piece Angle Head Wrench Set

• 30/60 degree angles, allow the use of the wrench in 4 positions • 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1 /16”, 1-1/8”, 1-1/4”

V8T816 16 Piece Angle Head Wrench Combination Set

• 8mm-23mm • 30/60 degree angles, allow the use of the wrench in 4 positions

V8T819 9 Piece Jumbo Angle Head Open End Wrench Set

• 30° and 60° angles allow use of wrenches in 4 different positions • Made of drop-forged alloy-steel, and comes in a canvas pouch. • Includes sizes: 24mm to 32mm.

SUN9916 6 Piece Jumbo Angle Head Wrench Set

• High density drop forged alloy steel for strength • Raised panel design • 15 degree and 60 degree angled ends for easy access • Wrenches guaranteed and available as set or individually • Comes with convenient metal clips for storage Set includes: 1-3/8”, 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8” and 2”

Metric Jumbo Angle Head Wrench Sets

• Canvas pouch included • Fully polished drop forged alloy steel • 15 degree and 60 degree angled ends for easy access • Wrenches are fully guaranteed • Available as set or individually

SUN9926 - 6 Piece Set includes: 20mm, 21mm, 22mm, 23mm, 24mm and 25mm SUN9927 - 7 Piece Set includes: 26mm, 27mm, 28mm, 29mm, 30mm, 31mm, and 32mm

Metric Combination Wrench Sets Raised Panel Jumbo Combination Wrench Sets

• Made of drop forged steel, chrome plated and heat-treated to achieve maximum wear • Raised panel provides additional strength and durability • Jumbo wrenches are designed specifically to meet the needs of the professional who services heavy duty trucks and commercial equipment

KTI41006 - 6 Piece

Includes sizes: 1-3/8”, 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8” and 2”

KTI41004 - 4 Piece Includes sizes: 2-1/8”, 2-1/4”, 2-3/8” and 2-1/2” 18

• High polish, smooth finish • Heat treated chrome vanadium steel • Length allows access to hard to reach places • Laser engraved for easy identification • Packaged in a kit bag

KTI41801 - 9 Piece

Sizes include: 20mm, 21mm, 22mm, 23mm, 24mm, 25mm, 26mm, 27mm and 28mm

KTI41802 - 8 Piece

Sizes include: 29mm, 30mm, 31mm, 32mm, 33mm, 34mm, 35mm and 36mm


hand tools JIMMY BARS &

PRY BARS Jimmy Bars

OTC8203 3 Piece Striking Pry Bar Set

• Black chrome striking cap allows hitting the bar without damage to the handle • Set includes 12”, 18”, and 24” bar shank lengths packaged in a gray molded tray • Ergonomic handle • Polished tip with black oxide finish • Long-life finish resists rust and wear during use • OTC Marathon Lifetime Warranty

• Forged from chrome alloy steeland heat-treated to resist bending and breaking OTC7166 5/8” dia. 18” long OTC7167 3/4” dia. 24” long OTC7168 7/8” dia. 30” long OTC7420 7/8” dia. 46” long OTC7421 1” dia. 54” long

MAY40160 48” Dominator® Pry Bar

MAY40168 31” Dominator® Heavy Duty Curved Pry Bar

•The Blade is heat-treated the entire length •The handle is ergonomically designed to provide a more comfortable and secure grip •Curved blade style gives extra leverage •Length: 48” •Made in the USA

• Heavy duty stout pry bar for maximum leverage • Patented Dominator handle with strikeable end cap • Entire length of the bar is heat treated and tempered • Black Oxide for corrosion resistance • The shaft goes all the way through handle to metal cap

MAY40162 58” Dominator® Pry Bar

MAY40139 42” Dominator® with Curved End Pry Bar

• The Blade is heat-treated the entire length • The handle is ergonomically designed to provide a more comfortable and secure grip • Curved blade style gives extra leverage • Length: 58” • Made in the USA

• 5/8 square steel, the largest yet for the Dominators, hardened and tempered the entire length • Patented capped-end handle allows the user to strike the bar without damaging the handle • Two-composite handle designed for user comfort and reduced hand fatigue

HOOK AND PICK SETS

TIT17224 4 Piece Jumbo Bolstered Pick and Hook Set

•10-1/2” in length • Comfortable TPR Grips • Chrome plated Chrome-Vanadium steel shafts • 4 Picks: Straight, 90 degree, Offset, and Curved • Bolstered Shafts

MAY60000 4 Piece Dominator® Hook and Pick Set • Features a patented 2-composite handle with a capped end for solid striking • Set includes a 10” scratch awl, 10” 90-degree hook, 10” complex hook and 10” curved hook • Lifetime Warranty

MAY60027 4 Piece Dominator® X-Long Hook Set

• Extra length gives user access to previously unreachable areas • Hooks formed to fit into tight areas, allowing access over, around and behind wiring, hoses and other obstacles • 20-1/2” over all length • Includes extra long C-hook, complex hook, 90 degree hook, and cotter pin puller • Lifetime Warranty

19


hand tools

CHROME

SOCKET SETS

ARM15-705 29 Piece 12 Point 3/4” Drive Socket Set AST2134 21 Piece 3/4” Square Drive Socket Set

• Made of plated Chrome Molybdenum industrial drop forged, heat treated 45 steel • Comes in a plastic blow molded case Includes: (1) reversible ratchet, (1) flexible bar: 20”., (2) extension bars: 4” & 8”, (1) metal case, (16) sockets 3/4” dr., 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-5/8”, 1-3/4”, 1-13/16”, 1-7/8” & 2”

• 22 Sockets: 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-9/16”, 1-5/8”, 1-11/16”, 1-3/4”, 1-13/16”, 1-7/8”, 2”, 2-1/8”, 2-3/16”, 2-1/4”, 2-3/8” • 7 Drive Tools: 3/4” Drive Ratchet (19”), 3/4” Drive Breaker Bar (22”), 3/4” Drive Extension (5”), 3/4” Drive Extension (8”), 3/4” Drive Extension (16”), 3/4” Drive T-Handle, 3/4” Drive Universal Joint • Steel Case

ARM15-710 20 Piece 12 Point 3/4” Drive Socket Set

KTI24121 20 Piece 3/4” Drive 6 Point SAE Socket Set

• Includes 16 sockets from 3/4” to 2”, ratchet, t-handle and 4” and 8” extensions • All sockets are 6 point chrome vanadium • Packaged in blow molded plastic case

• 15 Sockets: 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-9/16”, 1-5/8”, 1-11/16”, 1-3/4”, 1-13/16”, 1-7/8”, 2” • 5 Drive Tools: 3/4” Drive Ratchet (19”), 3/4” Drive Breaker Bar (22”), 3/4” Drive Extension (8”), 3/4” Drive Extension (16”), 3/4” Drive T-Handle • Steel Case

ARM15-715 13 Piece 12 Point 3/4” Drive Socket Set • 11 Sockets: 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-9/16”, 1-5/8”, 1-11/16”, 1-3/4”, 1-13/16”, 1-7/8”, 2” • 2 Drive Tools: 3/4” Drive Ratchet (19”), 3/4” Drive Extension (8”) • Steel Case

SKT4721 21 Piece 3/4” Drive 12 Point Standard Fractional Socket Set • SuperKrome® finish provides long life and maximum corrosion resistance • SureGrip® hex design drives the side of the fastener, not the corner • Packaged in a molded plastic case • Made in the U.S.A. • Lifetime warranty

SKT4725 25 Piece 3/4” Drive 12 Point SAE Standard Complete Socket Set • SuperKrome® finish provides long life and maximum corrosion resistance • SureGrip® hex design drives the side of the fastener, not the corner • Packaged in a secure and portable storage case • Made in the U.S.A. • Lifetime warranty Set includes: 12 point socket sizes: 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-9/16”, 1-5/8”, 1-11/16”, 1-3/4”, 1-13/16”, 1-7/8”, 2”, 2-1/8” and 2-1/4”; 3/4” drive Pro Ratchet - 18”; 3/4” drive sliding T-handle - 18”; 3/4” drive extensions - 3”, 8”, 16”. Packaged in a blow molded case.

20

ARM15-735 16 Piece 12 Point 3/4” Drive Socket Set|

• 16 Sockets: 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-5/8”, 1-11/16”, 1-3/4”, 1-13/16”, 1-7/8”, 2” • (2) Socket Bars • (20) Socket Clips

ARM15-740 11 Piece 12 Point Deep 3/4” Drive Socket Set • 11 Sockets: 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-5/8” • (2) Socket Bars • (20) Socket Clips


hand tools

CHROME

SOCKET SETS ARM15-805 22 Piece 12 Point 1” Drive Socket Set

• 16 Sockets: 1-1/2”, 1-5/8”, 1-13/16”, 1-7/8”, 2”, 2-3/16”, 2-1/4”, 2-3/8”, 2-1/2”, 2-9/16”, 2-5/8”, 2-3/4”, 2-15/16”, 3”, 3-1/8”, 3-1/2” • 6 Drive Tools: 1” Drive Ratchet (30”), 1” Drive Breaker Bar (27”), 1” Drive Extension (9”), 1” Drive Extension (18”), 1” Drive Sliding Handle, Sliding Handle Adapter • Steel Case

ARM15-810 17 Piece 12 Point 1” Drive Socket Set

• 13 Sockets: 1-1/16”, 1-1/8”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-5/8”, 1-11/16”, 1-3/4”, 1-13/16”, 1-7/8”, 2” • 4 Drive Tools: 1” Drive Ratchet (30”), 1” Drive Breaker Bar (27”), 1” Drive Extension (9”), 1” Drive Extension (18”) • Steel Case

CHROME

ACCESSORIES

SKT47190 3/4” Drive Universal Joint

• SuperKrome® finish provides long life and maximum corrosion resistance • Added versatility • Spring loaded steel ball for ease of use • Made in the U.S.A. • Lifetime warranty This universal joint has a 1.5” diameter and is 3.69” in length.

3/4” Drive Socket Extensions

• SuperKrome® finish provides long life and maximum corrosion resistance • Improved access • Diamond knurled grip • Made in the U.S.A. • Lifetime warranty SKT47163 - 5” SKT47161 - 8” SKT47162 - 10”

SKT47170 3/4” Drive Professional Reversible Ratchet 18”

• SuperKrome® finish provides long life and maximum corrosion resistance • Triple tooth contact for smooth ratcheting action • Diamond knurled grip for sure handling • Lifetime Warranty

SKT47153 3/4” Drive 18” SuperKrome® Sliding T-Handle

• SuperKrome® finish provides long life and maximum corrosion resistance • Improved access • Easy sliding • Made in the U.S.A. • Lifetime warranty

TIT12048 3/4” Drive 40” Non-Ratcheting Breaker Bar

• Maximum torque:1000 ft./lbs. (138kg/m) • Lifetime Warranty

EZRMR34 3/4” Drive Extendable Ratchet • Telescopes from 24” to 39-3/4” • Quick-release drive head • Lifetime Warranty

KTI24500 3/4” Drive Universal Joint

• Chrome vanadium steel • Heat treated for wear and resistance • Built for rugged, professional environments • Laser engraved for easy identification • Economically priced Universal joint allows access to hard-to-reach fasteners.

KTI24050 3/4” Female to 1/2” Male Socket Adapter

• Heat treated for wear and resistance • Made of chrome vanadium • Laser engraved • Rugged style • Economically priced • Lifetime Warranty

3/4” Drive Socket Extensions

• Extension attaches to ratchet or other drive tool allowing easier access to tight spaces • Features high polish chrome finish and ball detent to fasten the socket to the handle without slippage • Manufactured with heat-treated chrome vanadium steel KTI24004 - 4” KTI24008 - 8” KTI24016 - 16”

KTI24090 3/4” Dr. Standard Ratchet KTI24092 3/4” Dr. Heavy Duty Pro Ratchet KTI24080 3/4” Breaker Bar • Length: 20”

KTI24070 3/4” Drive Sliding T-Handle Socket

21


hand tools

PLIERS & CUTTERS Individual Tongue and Groove Pliers

• SAFE-T-STOP prevents finger pinch • Right angle teeth grip in all directions • Undercut tongue and groove, won’t slip

Part Number

Description

Adjustments

CHA480

20” Big Azz tongue and groove plier

12

CHA460

16” tongue and groove plier

8

CHA444

12” Air Brake Tool

7

CHA442

12” curved jaw tongue and groove plier

7

CHA440

12” tongue and groove plier

7

CHA430

10” tongue and groove plier

7

CHA422

9-1/2” curved jaw tongue and groove plier

5

CHA420

9-1/2” tongue and groove plier

5

CHA428

8” tongue and groove plier

4

CHA426

5

CHA412

6-1/2” tongue and groove plier 22 and Groove Plier 6-1/2” V-Jaw Tongue

CHA424

4-1/2” tongue and groove plier

3

®

CHA908 Wiring Tool

• Strips wire with no damage to conductor • Crimps both insulated and non-insulated wire

5

CHA909 Crimping and Cutting Tool

• For use on both insulated and non-insulated solderless connections and terminals

CHA449 9” Curved High Leverage Cutting Plier • High carbon steel for superior performance

Iconic Code Blue® handle’s composite TPE core and over mold provide durability, comfort and secure grip

CHA911CB 9.5” Cable Cutter

CHA358CB 8” End Cutter

• Cuts up to 4/0 aluminum and 2/0 soft copper • Heavy-duty design, precision made of fine polished high carbon drop forged steel

• Precision made of fine polished, high carbon drop forged steel • Laser-hardened cutting edges provide longer life and greater ease of cut

CHA318CB 8” Long Nose Plier - Side Cutter

CHA338CB 8” Diagonal Plier - Lap Joint

• Channellock Permalock fasteners eliminate traditional nut-and-bolt failure or loosening • Laser heat treated cutting edges and teeth are cut cleaner and grip better while providing long life

• Laser-hardened cutting edges provide longer life and greater ease of cut • Precision made of fine polished, high carbon drop-forged steel

KTI57136 36” Heavy Duty Bolt Cutters KTI57124 24” Heavy Duty Bolt Cutters

• Features specially designed curved handles for more efficient strength application and comfortable rubber handles for firm and safe gripping • Chrome vanadium head is precisely heat treated and hardened for durability

• Features specially designed curved handles for more efficient strength application and comfortable rubber handles for firm and safe gripping • Chrome vanadium head is precisely heat treated and hardened for durability

KTI56209 9” Wire Stripper and Crimper Carded

• Can be used as wire stripper, machine screw cutter, wire cutter, insulated crimper or solderless terminal crimper 22


hand tools

PLIERS & CUTTERS

VGP1802536 5 Piece GrooveLock/ Traditional Pliers Roll Up Bag

OUR #1SET

S et includes one each: 6” GrooveLock V-Jaw, 8” Long Nose Plier, 8” Angled Diagonal Head Cutter, 9.5” Linemans Plier & 10” GrooveLock Straight Jaw.

VGP538KB 5-Piece Vise Grip Set

VGP2078711 3 Piece GrooveLock Kit Bag Set

Contains (1) each • 10R - 10” Straight jaw locking pliers • 10CR - 10” Curved jaw locking pliers. • 7WR - 7” Curved jaw locking pliers w/ wire cutters • 6LN - 6” Long nose locking pliers • 5WR - 5” Locking pliers. Curved jaw locking pliers with wire cutters.

VGP11SP 11” Locking C-Clamp with Regular Tip and Swivel Pads Jaw Capacity: 3-3/8”

VGP18R 18” Locking C-Clamp with Regular Tip Jaw capacity: 8”

VGP24R 24” Locking C-Clamp with Regular Tip Jaw capacity: 12-1/2”

Set includes one each: 8, 10, 12” GrooveLock Pliers. The specially engineered all purpose jaw grips round, hex, square and flat surfaces for incredible versatility

• Wide opening jaws provide greater versatility in clamping a variety of shapes • Swivel pads hold tapered work, awkward fabricating jobs and delicate projects without damaging the work surface • Turn screw to adjust pressure and fit work; stays adjusted for repetitive use • Constructed of high grade heat treated alloy steel for maximum toughness and durability • Guarded release trigger quickly unlocks and protects from accidental release

MTNC48 Quick Change Ratcheting Crimper Kit

• Patented design for changing jaw without a tool required • Jaws installed any side for left hand or right hand user • Adjustable crimping pressure • Includes 4 jaws for the most common automobile terminals • US Patent • 1 year warranty on material and workmanship

Patented quick change crimper including 4 jaws for the most common automobile terminals. Jaw A for insulated terminals AWG 22-18/16-14/12-10 Jaw B for non-insulated terminals AWG 20-18/16-14/12-10/8 Jaw C for open barrel terminals AWG 20-18/16-14/12-10 Jaw H for open barrel & V3.5 D-sub terminals AWG 14/22/8

HAMMERS KEN35423 TG35 Hammer-Fiberglass Handle

• HD Tire Hammer, with Rubber Head, 18” Long Fiberglass Handle, TG35, Handle # 35219

Double Face Sledge Hammers • Polished faces with generous bevels • Rust resistant black finish on sides

VAU18710 5 Piece Ball Pein Hammer Set

• Rust resistant black body and hickory handle • High quality - Made in the USA Contains 1 each of the following ball pein hammers: • VAUTC308 - 8 oz. • VAUTC2012 - 12 oz • VAUTC016 - 16 oz. • VAUTC224 - 24 oz. • VAUTC432 - 32 oz.

VAUSS4 - 4 Lb VAUSS8 - 8 Lb. VAUSS10 - 10 Lb. VAUSS12 - 12 Lb.

Double Face Engineers’ Hammers

• Patented hollow core handle and slipresistant, cushioned PVC grip absorbs shock

VAUSDF40 - 2-1/2 Lb. VAUSDF48 - 3 Lb.

23


hand tools

HAMMERS

• Steel face dead blow ball pein hammer heads • Shot filled canister provides dead blow action and reduces rebound effect • Steel reinforced handle

ARM68-524 - 24 Oz. Dead Blow Ball Pein Hammer ARM68-532 - 32 Oz. Dead Blow Ball Pein Hammer ARM69-532 - 21 Oz. Dead Blow Soft Face Hammer ARM69-533 - 42 Oz. Dead Blow Soft Face Hammer

KDT82303 5 Piece Hammer Set

• Contains the most striking tools for today’s applications • Highest quality forged alloy heads • Ergonomic comfort grip • Packaged in a durable storage tray • Lifetime warranty Set includes: 16 oz. ball pein, 3 lb. drilling, 12 oz. soft face, 16 oz. dead blow, and 16 oz. rubber mallet.

MTN4044 4 Piece Dead Blow Hammer Set

• Piston hammer features an extended head that allows the hammer to pass the deck of the engine block for piston installation • P iston hammer provides dead blow action and absorbs shock, reducing the chance of injury •C  omplete range for a wide variety of tasks • S oft face won’t mar surface • Includes 1/2 lbs. dead blow hammer, 1 lbs. dead blow hammer, 2 lbs. dead blow hammer, and 32 oz. piston hammer

Dead Blow Hammers • Rubber coated • Cushion grip TIT63124 - 24 oz. TIT63032 - 32 oz.

TMRTi261T Soft Face Dead Blow Slimline Hammer

• Face Diameter 1-1/4”, Head Length 4 3/16”, Overall Length 10 5/8” • Perfect For Wheel Weight Installation • Weight 18 oz • Made In USA

MTN4046 6 Piece Mountain Hammer Set

• 16 oz and 32 oz ball pein hammers with fiberglass handle • 3 lb cross pein hammer with fiberglass handle • 3 lb sledge hammer with fiberglass handle • 32 oz rubber mallet with fiberglass handle • 24 oz dead blow hammer

BASH Brass Sledge Hammers

BASH Sledge Hammers

• Unbreakable Handle Technology and steel core design • Hi-Vis green easily identifiable on jobsite and flat head to stand upright for easy reach • Safety plate locks head firmly to handle eliminating head dislodging • Non-slip grip textured handle and Lanyard hole to safely secure sledge to your wrist WIL20212 - 2-1/2 lb. Head, 12” WIL20416 - 4 lb. Head, 16” WIL20616 - 6 Ib. Head, 16” WIL20816 - 8 Ib. Head, 16” WIL21016 - 10 Ib. Head, 16” WIL20824 - 8 lb. Head, 24” WIL20836 - 8 lb. Head, 36” WIL21236 - 12 lb. Head, 36”

24

• Brass Head is non-sparking for use nearcombustible materials and non-marring to reduce work damage • Unbreakable Handle Steel core eliminates breaking during overstrikes • Safety Plate prevents head from dislodging • Anti-Vibe Neck with tapered design eliminates vibration from striking • No-Slip Grip made from vulcanized rubber ensures a secure hold The Wilton BASH backed by our $1,000 Guarantee, we put our money where our mouth is. WIL90212 - 2-1/2 lb Head, 12” WIL90412 - 4 lb. Head, 12” WIL90416 - 4 lb. Head, 16” WIL90616 - 6 lb. Head, 16”

WILBASH3PC 3 Piece BASH Hammer Set

• Unbreakable Technology steel core design eliminates breaking during overstrikes • Kit contains: - 1 Wilton BASH 2-1/2 lb sledge with 12” handle - 1 Wilton BASH 24oz Ball Pein with 14” handle - 1 Wilton BASH 32oz Cross Pein with 16” handle - Hard plastic carrying case


TORQUE

ESC10007 Torque Master II Hand Torque Wrench

• Extremely accurate • Consistent torque values +/- 4% • Designed to torque various ranges of wheel types and sizes • Use on single and dual wheels • Break type model reversible Includes molded high impact plastic case.

measurement WRENCHES

PREC4D600F 3/4” Dr. “Split Beam” Torque Wrench with Detachable Head (200-600 Ft/Lbs)

• Convenience: This tool does not have to be “turned down” after use • Speed: Innovative torque mechanism requires only fingertip force to adjust • Durability: All steel construction resists industrial fluids and abuse • 4% accuracy clockwise • No need to reset tool • 1 year warranty, with dated calibration compliance certificate

PREC5D600F 1” Drive, 600ft./lb. Click Wrench  (200-600 ft./lb.)

• No need to reset the tool to the bottom of the scale after use since there is no internal coil spring • Innovative torque measuring mechansim requires only fingertip force to adjust the reading •R  ugged construction resist industrial fluids and counters abuse • 4 % Accurate clockwise and counterclockwise direction

KTI72175 3/4” Drive Torque Wrench - 100-600 ft/lbs • Ratcheting torque wrench, micrometer style • 42” long

Ratcheting style torque wrench “”clicks”” when proper torque is achieved. Works only in clockwise direction. Packaged in blow molded case

KTI72176 3/4 Drive Ratcheting Torque Wrench, 100-600 ft/lb

•M  icrometer style torque wrench, adjustable, 41” long, USA, in case

KTI72145 3/4” Drive Click-Style Torque Wrench, 100-600 ft/lb

PREC4D600F36H 3/4” Torque Wrench and Breaker Bar Combo Pack

• This unique combo pack allows you to use your torque wrench for measurement and your ratcheting breaker bar to break bolts loose • Combo pack includes Split Beam Torque Wrench (PREC4D600F) and Breaker Bar Handle (PREXT36H) • Push button allows the user to select desired length up to 41”

PREC5D600F36H (1” Drive)

• Includes Split Beam Torque Wrench (PREC5D600F) and Breaker Bar Handle (PREXT36H)

• E Z-turn torque adjustment • P ush-button release for quick socket changes •W  orks in clockwise and counter-clockwise directions

Chicago Pneumatic™ Torque Wrenches

MTN16600 3/4” Drive Torque Wrench - 100-600 ft/lbs

• Click style torque wrench with PRO Ratchet Head • Micrometer style clicks and/or releases when preset torque is reached • Hardened steel body with knurled handles • Metric and english settings • 1 year warranty on material & workmanship

• 54 tooth fixed pear-shaped head ratchet with quick socket release • Simple torque adjustment with manual locking in front of the handle • Individually numbered and provided with Calibration certificate • Reliability of the mechanism up to 25,000 cycles • Includes a blow molded case for additional protection

CPTCP8920 3/4” Torque Wrench - 100-550 ft-lbs

CPTCP8920E 3/4” Torque Wrench - 150-750 Nm

AMN67000 Torqcheck

• Most affordable way to accurately check torque wrenches • Accurate within +/- 2% • Precision needle gauge measures from 0 – 180 ft. lbs. • For use with all ½” torque wrenches • Not to be used with impact wrenches

CPTCP8925 1” Torque Wrench - 100-750 ft-lbs CPTCP8925E 1” Torque Wrench - 200-1000 Nm 25


starting / charging

BOOSTER PACKS SOLES1224 Truck PAC 12/24 Volt Jump Starter • 3200 Peak Amps (12 Volt)/800 Cranking Amps (12 Volt) • 1500 Peak Amps (24 Volt) • Assembled in USA

SOLES8000K 1500 Peak Amp 24 Volt Truck Pac Jump Starter

• Long 54” cables for extra reach on large vehicles and implements • Industrial grade Hot Jaw clamps penetrate corrosion on battery terminals • 1 year limited warranty

SOLES6000KE Truck PAC 12 Volt Portable Battery Booster Pac - 800 Cranking Amps • 3000 peak amps • 54” cables and industrial grade heavy duty clamps

SCUPSJ-3612 ProSeries Jumpstarter with 2 18AH AGM Batteries

• Integrated 3 Amp Automatic Charger • 2 Gauge, 55” HD Welding Wire Cables • On/Off Switch w/ Polarity Warning for Added Safety • Built-In Voltmeter • 3600 Peak Amps, 470 Cranking & 385 Cold Cranking Amps • 12V DC Power Outlet

SOLJNC1224 Jump-N-Carry 12/24 Volt Jump Starter

• Delivers 3400 Peak Amps of jump starting power in 12 Volt mode, and 1700 Peak Amps of jump starting power in 24 Volt mode

SOLJNC950 Jump-N-Carry 12V Jump Starter - 2000 Peak Amps

• Long, 46” #2 gauge cables allow convenient positioning of the unit during jump starting, while Industrial-Grade Hot Jaw clamps penetrate battery terminal corrosion and provide maximum power transfer • Volt gauge provides an accurate, detailed state of charge for the onboard battery

SCUPSJ-4424 Portable Power ProSeries JumpStarter for 12 Volt and 24 Volt Batteries

• 2 x 22AH ProGrade H/O AGM Batteries • 2 Gauge, 55” HD Welding Wire Cables • On/Off Switch w/ Polarity and Voltage Warning for Added Safety • 4400 Peak Amps, 500 Cranking & 415 Cold Cranking Amps • 12V DC Power Outlet

POWER

INVERTERS

SOLJNCXF Jump-N-Carry X-Force 12 Volt Jump Starter

• Exceptional jump starting power – delivers 770 Crank Assist Amps • Extra-long 68” cable leads allow X-Force jump starters to be positioned in the ideal location during jump starting, even on larger vehicles

SOLPI20000X SOLAR 2000 Watt Power Inverter SOLJNCXFE Jump-N-Carry X-Force Extreme 12 Volt Jump Starter

• Exceptional jump starting power – delivers 1540 Crank Assist Amps • Extra-long 68” cable leads allow X-Force jump starters to be positioned in the ideal location during jump starting, even on larger vehicles 26

• Delivers 2000 Watts of continuous power and 4000 Watts peak • SOLAR Sonic Compression Technology ensures stable power delivery throughout the operating range of the inverter • Displays provides detailed information on input voltage and output wattage • Features three AC outlets and a wide variety of safety features, including overload protection, overheat protection, low voltage alarm, low voltage shut down and over voltage shut down

SOLPI30000X SOLAR 3000 Watt Power Inverter


starting / charging

BOOSTER CABLES

GDL12-375 Start-All, Plug Type 4-Gauge

• 20 ft. standard duty kit • 4 ga. with blue plug 5 ft. battery to plug, 15 ft. plug to 400 amp clamps with weather cap

ASO6139 Plug-In Starting System Cable

GDL12-400 30’ Start All® Plug to Plug Kit

• Stainless steel receptacle mounts onto a truck bumper and connects directly to a battery • Reaches stalled vehicles from front, back or side • Includes 25’ tangle free starting cables, side terminal adapters, and polarized LEXAN plug • 500 Amp clamp • Made in the U.S.A.

• 4 gauge with blue plug 5’ battery plug with weather cap, 25’ to 400 amp clamps • 30’ standard duty kit

GDL12-475 12-475 Plug-to-Plug Booster Cables Heavy Duty Kit 2 Ga 20 Ft • 20 ft. heavy duty kit • 2 ga. with blue plug 5 ft. battery to plug, 15 ft. plug to 500 amp clamps with weather cap

ASO6157 500 Amp 12 ft. Booster Cables

GDL12-500 30’ Start All Plug to Plug Kit

• 12’; 4 Gauge; 500 AMP • Side terminal adapters • Professional quality, heavy duty booster cables ensure quick and efficient connections • Associated Equipment has designed these cables with your safety in mind - from side terminal adapters and “Flexi-Spring” cable guards to insulated safety clamps and 100% copper jaws.

• 2 gauge with blue plug 5’ battery to plug with weather cap • 25’ plug to 500 amp clamps

GDL12-600 30’ Diesel Equipment Start All Plug to Plug Kit

ASO6202 500 Amp Replacement Battery Clamp

• 1/0 with red plug 5’ battery to plug, 25’ plug to 800 amp clamps with weather cap • 30’ diesel equipment kit

• Professional quality, heavy duty clamps for all booster cables • Fully insulated safety clamps won’t spark if tapped together • Solid copper jaws • 500 AMP • Bonded plastisol vinyl insulation • For use with cable 3, 4, 6 GA • Has flexi springs

GDL14-500 Booster Cable Clamps 500 Amp (1-pair) • Color identification for positive and negative • Solid copper jaws for starting units, heavy booster cables

GDL14-800 Booster Cable Clamps 800 Amp (2-pair)

FREE

• Two (2) pairs packaged on a merchandise card

FJC45215P 10 Gauge 12’ 250 Amp Light Duty Booster Cable

with purchase of either FJC45265 or FJC45255 $16.99 FREE Good Retail Value. While Supplies Last

Booster Cables

While Supplies Last

• Booster cables have a tangle-free design • Flexible to -40 degree Fahrenheit temperatures • Vinyl coated clamps help prevent rust and corrosion • For side and top battery post

HD & Parrot Clamp Booster Cables • Medium to Commercial duty • High/Low Temperature construction

KTI74510 16’ Medium Duty 6 Gauge Cables with 400 Amp Clamps KTI74530 25’ Extra Heavy Duty 2 Gauge Cables with 500 Amp Parrot Jaw Clamps

PLUS FREE Self Powered Light

KTI74510

• Tangle free design • Heavy duty jaws

FJC45265 2/0 Ga. Booster Cables with 800 Amp Commercial Grade Clamps • 25’ Cables KTI74530

FJC45255 1 Gauge 25’ 800 AMP HD Clamp Booster Cables 27


starting / charging BATTERY

MIDMDX-700HD Heavy Duty Battery/Electrical System Analyzer

• Battery Pack Testing (1-6 Batteries) for effective preventative maintenance testing • Special commercial battery algorithms for Group 31 batteries, 8D and 4D batteries • 15’ tester cable for efficient testing from the cab • New clamp designed specifically for HD and Commercial testing • Print capable with optional IR printer part # A087

TESTERS SOLBA327 Digital Battery and System Tester with Integrated Printer

• Tests 6 and 12 Volt Batteries (40 – 2000 CCA); Tests 12 Volt and 24 Volt Vehicle Starting and Charging Systems • Tests multiple battery types, including Conventional, Maintenance Free, AGM, Gel Cell, Marine and Deep Cycle batteries

MIDMDX-700P-HD HD Battery/System Analyzer with Integrated Printer • Battery Pack Test (1-6 Batteries) for effective preventative maintenance testing • Special commercial battery algorithms for Group 31 batteries, 8D and 4D batteries • 15’ field replaceable tester cable • Built in integrated printer

MIDEXP-1000-HD-AMP Digital Battery and Electrical System Analyzer with Inductive Amp-Clamp for Heavy Duty/Fleets MIDEXP-1000HD Advanced Battery and Electrical System Analyzer MIDEXP-1000HDAMPKIT Heavy-Duty Expandable Electrical Diagnostic Platform

• Cable voltage drop testing and mutimeter capabilities • AMP testing capabilities including parasitic draw • Tests Flooded, AGM, & AGM spiral batteries • Automotive & Commercial / Fleet Battery & Electrical System Analyzer with Heavy-Duty Clamps, DDM Leads & Clamps, Amp-Clamp, Printer, & Case

OTC3168-HD Heavy Duty Battery and Electrical System Diagnostic Tester Kit with Printer

• Heavy duty for 24 volt battery and electrical systems • Diagnose battery packs in series, parallel, or series/parallel • Test AGM/gell cell batteries • Includes infrared wireless printer Deluxe kit includes 24 volt heavy duty battery tester, 15’ test leads, instructional manual, molded plastic carrying case, and an infrared wireless printer.

OTC3167-HD Heavy Duty Battery and Electrical System Diagnostic Tester

• Heavy duty for 24 volt battery and electrical systems • Diagnoses battery packs in series, parallel, or series/parallel • Test AGM/gel cell batteries Deluxe kit includes 24 volt heavy duty battery tester, 15’ test leads, instructional manual, and molded plastic carrying case.

CHARGERS SCUPSW-61224 Heavy Duty 250/65/35/5 Amp Wheel Charger/Starter SCUINC812A 8 Bank Automatic Charging Station

• Fully automatic charging station for 1 - 8 batteries at a time • Includes 8 sets of 72” cables • Designed for standard, AGM and gel cell batteries • Charging currents from 12 to 2 amps • 110V powered

• Large face, clear-view amp meters and volt meters with easy-to-read graduated scales • 600 amp heavy duty, chrome plated steel ultra-grip clamps with plastic-coated handles and heavy-gauge spring for conductivity and long-term durability • Dual high performance transformer design • 6-foot heavy-duty, commercial gauge TPE welding-grade cables for minimal current loss and flexibility in cold temperatures • Tubular, chrome-plated handles with rubber grips and unique non-conductive clamp rests 6 volt 180/80/40 amp, 12 volt 250/65/35/5 amp, 24 volt 200/30/10 amp, manual battery charger and engine starter with a dual highperformance transformer design. Extra-long, 6-foot AC line cord for greater accessibility and reach. Durable, heavy-duty steel cabinet with wide-track rubber wheels.

28


starting / charging

CHARGERS

ASO6001A Heavy Duty Commercial 6-12 Volt Battery Charger

• 375 cold crank amps • 16 rates of charge 75 Amp continuous charge with 375 Amps crank assist at 12 volts • UL and CSA listed for indoor and outdoor use, “Safe in any Weather.” • UL continuous ratings-100/75 Amp; UL cranking assist rating-375 Amp • 500 amp, fully insulated, “Flexi-Spring” clamps

ASO6002B 6/12/18/24V Battery Charger

• The highest performance fleet charger on the market comes with our best manufacturer’s boost rating of 600 AMP • 400 cold crank amps • Charges 6, 12, 18, and 24 volt batteries • Heavy-duty transformer, patented ’Sub-Sil’ multidiode rectifiers, longer AC cord and DC leads are standard features for higher performance • UL listed for indoor and outdoor use, “Safe in any weather.” Heavy-duty chrome plated handle with clamp-holder/bar. Hinged steel cover to protect meters and knobs. Rugged 7” tires.

ASO6006 6/12/24V Battery Charger

SOLHT1224 Heavy Truck 12/24 Volt Commercial Charger/Starter • Automatic 10 Amp battery charger • 1400 cold cranking amps in 12 volt mode • 800 cold cranking amps in 24 volt mode • 10’ jumper cable leads • Ships with (2) Group 31 batteries

SOL2001 12 Volt Commercial Charger/Starter

• Automatic 10 Amp battery charger • Jump starting based on battery installed • 5’ retractable Jumper cable leads • Requires Group 31 battery (not included) • 1 Year Limited Warranty The 2001 is a commercial-grade, heavy duty battery charger and jump starter designed to maximize space and deliver convenience in the shop. It features 5’ retractable jumper cable leads made of #2 gauge welding cable and a heavyduty 10 amp charger, all in an easy to maneuver, space-saving design.

SOL3001 12 Volt Commercial Charger/Starter with Air Compressor

150 PSI air compressor with automatic shut-off switch and hands free clip on air chuck. Compressor can inflate a 14” car tire in less than 2 minutes. Includes 1 year limited warranty.

• Fleet charging power with a cranking assist rating higher than any other charger in its classification • This heavy-duty fleet charger rejuvenates all standard and maintenance-free, 6, 12, and 24 Volt batteries with five charging positions • UL continuous rating- 70/65/30 Amp; UL cranking assist rating - 280 Amp • UL rating indoor and outdoor - safety

SOLPL3750 6/12/24V 60/40/15/5/250A Pro-Logix Wheel Charger with Engine Start

ASOESS6011 12/24V, 70/35A, 200A Boost Wheel Charger/Analyzer

• 70 AMP Power Supply - Nominal 13.7V DC Output • AGM, GEL Cell, Sealed and STD Flooded Batteries • Dead Battery Override Control • 3 Year Limited Warranty - “Safe in Any Weather”

• Features three operational modes: automatic charging, manual charging and engine start • Provides the ability to properly charge virtually any lead acid battery type: Conventional, AGM, Gel Cell, Spiral Wound, Marine and Deep Cycle batteries • Electronic controls and LCD display make it easy to set up each operation and to monitor chargingprogress, the charger provides extensive feedback regarding charging progress • Advanced multi-phase charging process delivers a proper, beneficial charge every time, improving battery health and restoring reserve capacity • Features a Soft Start Mode for severely depleted batteries and a Recondition Mode to rejuvenate distressed batteries

29


starting / charging START-ALLS /

GENERATORS GDL11-605 12 Volt, Start-All®

12 VOLT 450 AMP

• 12 volt nominal, 450 amp cranking capacity • Volt and amp meter to monitor boosting output • Voltage regulated to protect on-board electronics • Antizap® voltage surge protection for safer boosting • 30 ft., 1/0 gauge welding cable allows convenient access to vehicles This small, compact, gasoline powered, heavy duty starter has 1000 amp full-power jaw clamps that allow higher amperage flow. Polarity and low battery LED indicators confirm proer connections. Features an electric start Briggs and Stratton Vanguard OHV engine with single switch for easy operation. Ideal for small fleets, in town trucks, rental and agricultural equipment. Dimensions are 12”L x 27-1/2”W x 26”H and weighs 315 lbs.

GDL11-610 12 Volt, Start-All®

12 VOLT 700 AMP

• 12 Volt jump starting • 700 Amp output • Full voltage regulation • Volt and amp meter • Single cable, single switch for easy operation This Electric Start, air cooled Briggs and Stratton Vanguard OHV V-Twin gasoline engine with 2-1/4 gallon fuel tank has the output necessary for starting heavy-duty vehicles and equipment. Performance you can rely on - start after start, year after year, and power that will crank engines in cold weather climates vehicle after vehicle. Powerful 12 volt jump starting in a compact size.

GDL11-620 12/24 Volt, Start All®

12/24 VOLT P 700/350 AM

• Voltage regulated - controls output voltage to a safe level for today’s vehicles • Surge protected with AntiZap provides safer boosting • Volt and amp meter to monitor boosting output • 30’ 1/0 gauge. cable allows flexibility and ease of use • 1000 amp full power clamps allow higher amperage flow The 11-620 has the output necessary for starting heavy duty vehicles and equipment. Performance you can rely on - start after start, year after year - and power that will crank engines in cold weather climates vehicle after vehicle. Powerful 12/24 volt jump starting in a compact size. Electric start, air cooled Briggs and Stratton Vanguard OHV V-Twin gasoline engine with 2-1/4 gallon fuel tank.

GDL11-621 12/24 Volt, Start All® with AC Generator

12/24 VOLT P 700/400 AM 30

• Output: 12 volt nominal, 700 amp; 24 volt nominal, 400 amp • Cables and Clamps: 30ft., 1/O ga. welding cables; 1000 amp full-power clamps • AC Generator: 2000 watt, 1 duplex 120 volt, 20 amp outlet • V oltage regulator with reverse polarity protection controls output voltage to a safe level for today’s electronics • Surge protection with Antizap provides safer boosting • P olarity and low battery LED indicators confirm proper connections • Engine: Electric start, air cooled Briggs and Stratton Vanguard OHV V-Twin gasoline engine with 2-1/4 gallon fuel tank


starting / charging START-ALLS /

GENERATORS

CMF100219 7500/9375 Watt Portable Gas-Powered Electric Start

• 7500 running watts/9375 starting watts • 439cc OHV Champion single cylinder, 4-stroke air-cooled engine • Includes 25 foot power generator cord • Convenient electric and easy pull recoil start • 120V/240V AC Load The Champion Power Equipment 100219 gasoline powered, electric start portable generator is powered by a 439cc Champion single cylinder, 4-stroke OHV engine that produces 7500 running watts and 9375 starting watts. With a 6.1 gal. fuel tank this unit can run up to 8 hours at 50% load. Our OHV engine is equipped with a low oil shut-off sensor and designed for long life and easy maintenance. This unit is ideal for large RV’s, trailers, power tools, jobs around the house, or home back-up power during emergencies.

BATTERY CHARGING

SOLFMB1224 12/24V Fixed Box Commercial Jump Starter • 1800 CCA in 12 Volt mode • 900 CCA in 24 Volt mode • Includes 3 Group 31 batteries • Automatic 7Ax3 charging system • 16’ 4/0 jumper cable leads

Providing endless jump starts for commercial fleets or heavy construction equipment, this unit will start any 12 Volt or 24 Volt engine. Recharge using AC cord or connect permanently to service vehicle’s 12 Volt alternator harness.

RACK

GDL13-438 Super Boost All Battery Box with Connection Cables ASO6086 Battery RACK 10 Pair Leads

• Stores up to 15 batteries at once • Includes 10 pairs of charging leads • Polypropylene sheets protects shelfs from battery acid • Made in the USA

• (4) Group 31 AGM batteries • 925 Cold Cranking Amps per battery • With connecting cables • For use with any Super Boost All control box

31


diagnostics

SCAN TOOLS AND SOFTWARE

NRS263025 JPRO Professional Diagnostic Toolbox

• Reads, displays and clears 44,000+ fault codes • Now with expanded bi-directional coverage for Heavy-Duty (Mack, Volvo, Detroit, Cummins) and Medium-Duty vehicles • Laptop comes loaded with JPRO® Professional™ Software Bundle with 12 months of support and annual subcriptions for Mack and Volvo, Cummins & Detroit Diesel • Shortens repair time, increases uptime, and lowers maintenance costs • Simultaneous diagnostic assessment of the ENTIRE truck in less than one minute

P

NEXT STE NRS263025-NS JPRO Professional Diagnostic Toolbox with Next Step

• JPRO Professional Heavy-Duty Command Bundle covers class 7-8 vehicles • Includes JPRO Command Modules for Ford, GM, and Sprinter Vehicles • Annual subscriptions for Mack & Volvo, Detroit Diesel, and Cummins engines • Provides Next Step Service Information • 6-pin, 9-pin, Mack & Volvo OBDII Vehicle Cables, USB cable, DLA+ 2.0 Adapter with 3 CAN support

P

NEXT STE

32

NRS212100 JPRO Professional Software Bundle

• Covers all major Heavy-Duty OEMs (Class 7&8) 1997 - present • All makes, all models for class 3-8 vehicle coverage • Bi-directional controls and proprietary information for Mack, Volvo, Detroit Diesel, Cummins, Ford, GM and Sprinter • Reads, displays and clears 44,000+ fault codes • Next Step service and repair information for engines, ABS, transmissions and more

NRS212100-NS JPRO Professional Diagnostic Software with Next Step

• Most comprehensive and powerful all makes, all models diagnostic software • Performs service and repair information with bi-directional functionality • Reads, displays and clears 44,000+ fault codes • Now with expanded bi-directional coverage for Heavy-Duty (Mack, Volvo, Detroit Diesel and Cummins) and Medium-Duty vehicles (Ford, GM, Sprinter) • Also includes Next Step Service Information


diagnostics

SCAN TOOLS AND SOFTWARE NRS232125 JPRO Professional Diagnostic Software and Adapter Kit

• Now with Medium-Duty Coverage for Ford, GM, & Sprinter vehicles clears 44,000+ fault codes • Shortens repair time, increases uptime, and lowers maintenance costs • Reads displays and clears 44,000+ fault codes • Comes with JPRO DLA+ 2.0 Adapter, 6-pin, 9-pin cables, Mack & Volvo OBDII Cable for DLA+ 2.0, USB Cable, and Fleet Service Carry Case • Also contains JPRO® Professional™ Diagnsostic Software

NRS232125-NS JPRO Professional Diagnostic Software and Adapter Kit • Includes: JPRO Professional Heavy-Duty Command software Bundle • Annual subscriptions for Mack & Volvo, Detroit Diesel, Cummins • Also includes Next Step Service Information • 6-pin, 9-pin, USB, and Mack & Volvo OBDII Vehicle Cables • JPRO DLA+ 2.0 Adapter with 3 CAN support

TRAILOR

NRS122061 JPRO DLA+ 2.0 Adapter Kit

• Provides 3 CAN channel support • 9-pin vehicle cable • 6-pin vehicle cable • USB cable • C  arrying case The DLA+ 2.0 adapter kit features a heavy-Duty Diagnostic communication device that interfaces the vehicle to a PC via USB cable for diagnostic and vehicle information, re-programming or parameter adjustments.

NRS122511 Noregon Trailer Diagnostic Adapter with Power Cable • Includes J560 Power Supply Cable which allows connection directly to the trailer using a secondary power source • Compatible with JPRO Professional Diagnostic Software • Also compatible with Bendix - ACom Trailer, Haldex ABS, Meritor WABCOTOOLBOX, and Wabash ABS for PLC • Kit includes: 7-pin J560 T-Connector cable, and USB cable • Adapter kit comes in convenient carrying case

NRS40106 Set-Up/Installation and Testing for Customer Computer

• Required Service To Install OEM Software on customer supplied computers • Includes shipping insurance for customer supplied computer • Set-up and testing ensures that all JPRO applications open and run properly • “On Truck” testing also ensures all OEM applications open and run properly • Let Noregon’s experts get your computer shop ready!

NRS32135 Heavy Duty ABS Software Bundle NRSVEROPT2 Verizon/Noregon Service Bundle 33


diagnostics

SCAN TOOLS

AND SOFTWARE

BOS3824 ESI Heavy Duty Truck Multi-brand Diagnostics System

• All major HD OEM’s covered • DPF re-burn • Bi-directional control • Cylinder cut-out • Key special tests • Injector Coding • RP1210 compatible VCI/VDA • Auto ID • Reads and clears fault codes • Data stream • Full parameter access • Kit includes Bosch DCU100 hand-held tablet • Contains Trouble shooting and repair information • Provides electrical wiring diagrams and component locations

BOS3824BSC

Multi-Brand HD Truck Diagnostics for PC • PC Version of ESI Truck • Multi-Brand HD Truck Diagnostics • All major HD OEM’s covered • Read and clear fault codes • Key special tests, bi-directional tests • Provides electrical wiring diagrams • Contains repair information • Full parameter access

OTC3418 Heavy Duty Code Reader Kit

• HD J1587 / J1708 and J1939 CAN, Engine, Transmission/ABS coverage and more for diagnostic trouble codes • Provides on screen DTC definitions for heavy duty standard codes • Applications: Tow trucks, recreational vehicles, cement trucks, dump trucks, garbage trucks, buses, step vans, municipal vehicles, refrigerated trucks, and conventional trucks • Battery powered for off vehicle use • Internet update capable

OTC3075 Ez-Tap Wireless Diagnostic Hardware Kit

OTC3417 HD Scan - Heavy Duty Scan Tool

• Class 4 – Class 8 truck coverage featuring “Automatic Protocol Search”. HD J1587 / J1708 and J1939 CAN, Engine, Transmission/ABS coverage and more! • Live vehicle data such as: engine speed, engine ECU temperature, percent acceleration pedal position, engine intercooler temperature, engine coolant temperature, battery volts, alternator volts, ambient air temperature, and air inlet temperature • Fast Global OBD II Quick Test; Gasoline and diesel engine coverage; Vehicle data communication and power LED indicators • Demo mode permits operation without vehicle connection; supports multiple Global OBD II trouble code requests, generic codes (mode 3), pending codes (mode 7), enhanced codes, and GM DTC status • Automatic recording of data; customize data views in line graph, LED, or digital format with the push of a button

LAU301050175 CR-HD Plus Heavy Duty Code Scanner

• Covers Class 4 through Class 8 HD Trucks and OBDII LD vehicles • Includes 6 pin and 9 pin Deutsch connectors • Covers J1587, J1939, and J1708 protocols • Covers engine, transmission, brakes and more • Monitor all data and view LIVE data streams

34

• Ez-Tap truck access point hardware supports diagnostic modes of operation for J1939, J1708 and CAN protocols using a shops OEM software. This fully RP-1210a compliant access point communicates with the vehicle and transfers vehicle information to your PC. A 9-pin connector is built into the device, eliminating the need for a cable. Connection to the truck is accomplished in only a few seconds. Kit includes: Ez-Tap wireless (non-locking) VCI, Ez-Base wireless adapter, Ez-Tap 9-pin to 6-pin adapter, USB cable and Ez-Tap CD. Note: OEM diagnostic software not included.

OTC3085 Ez-Tap Fleet Telematic Wireless Starter Kit

• A truck access point providing telematics modes of operation for J1939, J1708 and CAN protocols. • Direct Diagnostics Mode – for use with OEM diagnostic software. • Fault Monitoring – Selective Fault Reporting. Kit includes: Ez-Tap wireless locking VCI, Ez-Base extended range wireless, USB cable, Ez-Suite software. Note: OEM diagnostic software not included.

CDOHDCODEPCAT Class 4-8 HD Truck Coverage for J1587, J1708 and J1939 Protocols

• Class 4-8 HD Truck Coverage for J1587, J1708 and J1939 Protocols • Access engine, transmission and brakes • Added capabilities for Caterpillar, International, Hino, Isuzu and Hybrid HD Trucks • A utomatic protocol search •N  ew CAT 9 Caterpillar Cable


diagnostics

SCAN TOOLS

AND SOFTWARE

MPS188001 Pro-Link IQ Diagnostic Scan Tool

• Saves time by automatically scanning for all vehicle ECUs to identify types and display active and inactive faults - no need to switch between an engine, transmission or brake application • OEM proprietary applications feature manufacturer specific terminology, additional fault codes, parameters, reprogramming and special tests if applicable • Intuitive, easy to use, color touch screen displays multiple codes, ECU data list parameters, graphs, and records at the push of a button

MPS181030 POCKET IQ W/CASE, HDS & ADAPTERS

MPS129048 Wireless Vehicle Link 2

• Monitors all vehicle data • Checks engine speed/load, pressures, temperatures, and other data • Reads active fault codes • Reads and clears inactive fault codes • Displays trip data • Collects and stores data from multiple vehicles • Stores data in PDF or text format • Provides J1587 and J1939 data

• Provides up to 300 ft. of wireless freedom • Comes with a 15 ft. USB cable (for connectivity and backup), drivers and utilities CD, Installation and Setup manual, and Quick Start Guide • Solves mixed-fleet challenges with broad protocol support • Minimizes investment in multiple brandspecific diagnostic interfaces

MPS855008 MPS124032 MPS124034

FIX TRUCKS FASTER SIMPLIFIED SOLUTIONS TO IMPROVE TECHNICIAN REPAIR EFFICIENCY.

COMMERCIAL VEHICLE PC-BASED DIAGNOSTICS Supports J1708, J1939, and HD OBD communication protocols with coverage for: Engines, Transmissions, Brakes, Trailers, Body Controllers, and Instrument Clusters • Features – Historical Data Maintenance – Vehicle Health Summary Report – Graphing and Data Recording … and much more • Obtain a free, 10-day trial version at: www.nexiq.com/eTechnician •

MPS 855008

USB-Link 2 ™

VEHICLE COMMUNICATION INTERFACE ADAPTER The most widely used and the most reliable vehicle interface in the Commercial Vehicle repair market just got better! • Our new and improved design includes improved processing power and provides the same great reliable connectivity. • Now with improved speed, and your choice of Bluetooth® or WI-FI connectivity. • A much more rugged plastic design also includes a more robust automotive grade USB connector. MAKE THE CHANGE IN 2016!

MPS 124032

MPS 124034

For more information, contact NEXIQ Technologies at 800-634-6774 or www.nexiq.com. APPLICATION SOFTWARE & VEHICLE INTERFACES

Engineered by NEXIQ Technologies™

©2016 IDSC Holdings LLC. All rights reserved. NEXIQ Technologies and USB-Link are trademarks of ISDC Holdings LLC. eTechnician is a registered trademark of IDSC Holdings LLC. All other marks are trademarks or registered trademarks of their respective holders. Pictures for illustration purposes only. Specifications subject to change without notice.

35


diagnostics

SCAN TOOLS MPS682020 Complete Abs Software Kit For Pro-Link Iq

• Read Fault Codes • Clear Fault Codes • View Brake Data • Coverages ABS Suite and Trailer ABS Suite • Includes: Complete ABS Kit PN 682020, Trailer Kit PN 682021, ABS Suite PN 682014, Trailer ABS Suite PN 882021, Meritor WABCO® Suite PN 888014, BENDIX® ABS Suite PN 889013 and J560 PLC Adapter PN 602020

MPS888014 Meritor WABCO Software Suite for Pro-Link IQ Scan Tool

• Display and clear ABS proprietary active and inactive fault codes • View or create data lists containing wheel sensor speeds, sensor voltages, vehicle voltages and switch status • Reprogram data on the ABS system for items • Command special test functions such as actuating valves, retarded relay and the lamp test • Graph or record on one screen the wheel speed sensors to quickly identify a defective component or eliminate it as the problem

MPS804014 Meritor Wabco ABS Air Brake Application Card for the MPC, Pro-Link®, Plus and Pro-Link Graphiq™ with PLC • Software provides the technician with functions necessary to service the tractor and trailer ABS brake systems • Read and clear fault codes • Component tests • Diagnostic data list • PLC test application

MPS804010 International NAVPAK Application Card for the MPC, Pro-Link® Plus and Pro-Link Graphiq™ • Displays diagnostic codes in Navistar or ATA format • Programmed with simple menus to easily navigate technicians through a variety of diagnostic functions • The service reprogramming function allows you to use the ProLink® Plus to download information from the vehicle’s ECM, send it by modem to Navistar and load the new command file into the vehicle’s ECM • View or reprogram selected operating parameters • Snapshot modes for recording data triggered by any key, any trouble code, specific trouble code, specific SID or specific PID for capturing intermittent problems

AND SOFTWARE MPS828005 Navistar® International® Diamond Logic® Builder Fleet

• Read Fault and clear diagnostic fault codes • View vehicle parameters and features • Bi-directional control of electrical components • View switch location and cluster configuration • Automatic module detection • Graph parameters • Record snapshots

MPS828009 MAXXFORCE™ and International® Engines 1995 - Current

• Read Fault and clear diagnostic fault codes • View, graph and save engine data • KOEO – Key On Engine Off • KOER – Key On Engine Running • KOEO – Injector Buzz Test • KOER – Injector Contribution Test • Cylinder Cutout Test (EPA 04’ and newer) • Injector Disable Tests (EPA 04’ and newer)

MPS880010 NEXIQ Technologies Pro-Link iQ International Engines

• KOEO—Key On Engine Off and KOEO—Injector Buzz Test • KOER—Key On Engine Running and KOER— Injector Contribution Test • Injector Disable Tests (Dual box ECMs only) • Cylinder Cutout Test (Dual box ECMs only) • Read Fault Codes, Clear Fault Codes, and View Engine Data

MPS880024 Caterpillar ACERT v 2.0

• Calibrations - Boost Calibration, Timing Calibration • Read Fault Codes and Clear Fault Codes • Diagnostic Test - Intake Valve Actuator Solenoid Test, Cylinder Cutout • Diagnostic Test - Injector Solenoid Test, Injector Actuation Pressure Test • View/Reset Trip Data, View EPA 07’ DPF Data Points, and View EPA 07’ DPF Fault Codes

MPS889024 Pro-Link iQ Caterpillar Engines

• Read Fault Codes, Clear Fault Codes, View/Reset Trip Data, and View Engine Data • Covers - 1990–2003 - 3116, 3126, 3176, 3406, C-9, C-10, C-12, C-15, C-16 • Calibrations • Diagnostic Tests and Special Tests • Display and change configurable parameters

MPS208040 Pro Link Plus MPC Cartridge

• Provides flexibility to provide diagnosis of engine and vehicle systems through the use of PC MCIA application cards (sold separately) • Works with vehicle protocols J1587, J1708, J1939, 160 baud • Easy application updates via RS232 port • Custom data list • Snapshot feature

• Printer support

The Multi-Protocol Cartridge (MPC) is an Intel-based Pro-Link Plus compatible cartridge designed to diagnose today’s J1708, J1939, 160 Baud, ISO 9141 vehicles. It provides anew platform that greatly enhances the flexibility of the Pro-Link Plus, and extends the life of this most versatile tool. To address advanced capabilities provided by manufacturers, the MPC uses PC MCIA cards. The cards are plugged into the back of the unit, and provide additional functions unique to each manufacturer. The following list contains features and functions that are available with this cartridge. 36


diagnostics

SPECIALTY

TESTERS PPR319FTC-FIRE Kit Shown

MPS807024 Software PCMCIA for Caterpillar ACERT Engines

Power Probe III Test Light and Voltmeters

• Reads fault codes, clears fault codes • View/reset trip data • View engine data list • Does Bi-Directional calibrations, special tests, diagnostic tests • Display and change configurable parameters

• Bad Ground Indicator and Short Circuit Indicator • 20’ Jumper Lead Set • Continuity Tester • Relay and Component Tester • Built in flashlight

MPS806008 Heavy Duty Standard Application Card for the MPC, Pro-Link® Plus and Pro-Link Graphiq™

PPR319FTC-RED PPR319FTC-BLU PPR319FTC-FIRE PPR319FTC-BLK PPRPP319CAMO PPR319FTC-CARB (Carbon Fiber)

• Display diagnostic codes and MIDs received • Simple menus direct the technician through diagnostic functions • Includes application card, manual, and MPS906008 NEXIQ Fault Code Guide • Power Line Carrier (PLC) test Application for Trailer ABS

PPRECT2000 Short/Open Circuit Finder

• Great for pinpointing short & open circuits, tracing wires & battery drains Includes: Transmitter, receiver, 15 min instructional video, 3 fuse adapters, 1 universal adapter, instruction booklet, case & 2AAA batteries

PPRPHPT1 Penetrator Tungsten Tip and Extender

• High performance Tungsten Alloy Tip drives through corrosion, oxidation, rust, paint, plastic coatings etc. for best ground/connectivity •D  esigned to be used with any PowerProbe • 4 mm standard plugs and jacks • P rovides accurate readings with DMM’s scopes meters •H  ardened tip– virtually indestructible

Shown Connected

TRATP9367 Marksman II Ultrasonic Diagnostic Tool • Internal noise control • Self-adjusting gain control enhances sensitivity

PPRPPH1 “The Hook” Ultimate Circuit Tester

• Measures and displays Amps as you power up components and circuits • Displays resistance in Ohms (up to 15 MegOhms) • Controls current from 2 to 65 amps (25 amps continuous) • Relay Tester (Test continuity and activate simultaneously) • Auto Sensing Probe automatically chooses Meter and Range for user

PPR219FTC Power Probe II Kit with Case

IPA9038 Fuel Pump Relay Bypass Master Kit

• Actuates fuel pump when the engine is not running • Plugs in place of relay • Controls fuel pump independent of “key on” systems • Operating range: 20 Amp continuous, 30 Amp surge (12V) • Covers most Domestic, Japanese, Korean, and German applications

• Tests the complete electrical system without constantly searching for a ground hook up

OTC4200 Nozlrater Diesel Injector Nozzle Tester PPRPPKIT03 Powerprobe Master Test Kit

• Includes Power Probe III, ECT2000, LS01 • The last Test Kit you will ever need • Compatible with both 319 and ECT2000

• Here is the ultimate tool for diagnosing a number of problems that affect diesel fuel injector nozzles • The Nozlrater tester enables you to check for leakage, pop-off pressure, spray pattern, and chatter. This tool will accommodate a wide range of injectors. We also offer adapters so you can troubleshoot nozzles used in popular automotive, agricultural, and construction engines. • Nozlrater features a rugged, lightweight reservoir that holds 7/10 of a gallon of fuel. It is equipped with a replaceable 2-micron filter. The large, dual-scale, high-pressure gauge is protected by a guard and includes an indicator needle to record maximum pressure reached. The tester is light enough to be easily carried for field use. Or you can benchmount it, using the holes in its base • Not designed for Cummins or Detroit injectors 37


diagnostics

SCAN TOOLS

TESTING

• Perform leak down test on service and emergency lines • Adjust slackers & measure pushrods using remote control • Power lights individually, all at once, via auto scan or remote control • Pulses power to shorted and overloaded circuits (patented Pulsar® technology) • ABS fault codes via Aux and brake circuit activation (i.e. Wabco/Bendix Tab-6 systems)

IPA9008-SE Super MUTT® Trailer Tester Standard Edition The Standard Equipment model includes 1 Remote, 1 Chassis Ground Cable, 1 7-way Pig tail and Glad Hand Hose attachments. The Super MUTT® Deluxe places a load on the trailer’s electrical circuits to identify wiring problems while providing remote control operation over both Air Brakes and Lights. Built to facilitate a one-man testing operation, the Super MUTT® reduces guesswork and inspection time to prevent failures that lead to expensive road calls and citations. The remote control allows for repetitive air brake actuation at each axle to reveal developing problems often missed by normal testing procedures.

IPA9004A Smart Mutt® (7 Spade Pin)

• Powers lights individually or all at once via auto scan or by remote control • Ground failure detection: differentiates between wire and chassis ground • Identifies open circuits and cross-wired circuits • Pulses power to shorted and overloaded circuits (patented Pulsar® technology) • Operates electric brakes by remote control

IPA9007A Smart Mutt® (7 Round Pin)

• Power lights individually, all at once, via auto scan or remote control • Ground failure detection: differentiates between wire and chassis ground • Identifies open circuits and cross-wired circuits • ABS fault codes via Aux and brake circuit activation (i.e. Wabco/Bendix Tab-6 systems) • Pulses power to shorted and overloaded circuits (patented Pulsar® technology)

IPA8048 HD Fleet Technician’s Electrical Terminal Maintenance Set

• Clean male and female electrical connections • Reduce diagnostic guesswork • Extend harness life • Maintain proper continuity • For Deutsch, Cannon, 7-way round, bullet, weather pack, trailer light connectors and more 38

IPA9008-DL Super MUTT® Trailer Tester Deluxe Edition The DL Model Kit includes the 7-way pig tail, glad hand hoses, 4 remote controls, steel face shield and rain cover. The Super MUTT® Deluxe DL Model places a load on the trailer’s electrical circuits to identify wiring problems while providing remote control operation over both Air Brakes and Lights.

IPA9101 Light Duty Ranger MUTT® Trailer Tester

• Tests 7-spade, 6-round and 4/5-flat pin type trailer harnesses • Short circuit protectionTurn signal simulation and power verification LED • Water resistantTests lights and electric brakes

IPA9102 Heavy Ranger MUTT® Trailer Tester • Test 7–way Round pin • Short circuit protection • Turn signal simulation and Power verification LED • Internal battery compartment • Water resistant • 5000m • A Battery Charger incuded

IPA7865 7 Round Pin Tractor Trailer Circuit Tester

• Plugs in line to the trailer to allow the truck to power the trailer while you test each circuit • Troubleshoots tractor trailer circuits • One person can test all the lighting alone • Allows you to bypass troubled circuits while on the road • Eliminates guesswork • Comes with an extra jumper connector


diagnostics

SPECIALTY TESTERS OTCJ-39700 WTEC III Universal Breakout Box

STATU15-70 Diesel Compression Test Set With Tester and Adapters

• Adapters are required for each application, such as 39700-25 for the 1996 C/H ABS/TCS System • Individual circuits can be monitored for voltage and resistance using a DVOM, such as J 39200 Fluke meter • This breakout box is used with several adapters to support ABS/TCS diagnostics on current and past models • Can be connected to any vehicle electronic system that requires dynamic testing • Kit includes extension tube and frame lifting bracket

• Contains tester and all the most popular adapters needed to test heavy-duty trucks and equipment • includes our TU-15 gauge with easy to read red and black dial and snap-in lens

TM

OTC6522 Leak Tamer

• Put better technology and portability in your shop with OTC’s new and improved smoke machine • 80% of top codes can be diagnosed with smoke technology • This unit is half the size of its predecessor, but twice as mighty with more powerful features • UltraTrace UV® Dye - the only OE approved solution • New smoke flow control adjusts for specific applications • Detects microleaks to and below .010”

WAE76600 Hi-Vis VoltPRO Voltage Tester • Dynamic voltage drop testing • Voltage snapshot • Min/Max Glitch Capture • Power and ground LED indicators • Computer safe

INSPECTION JSP78684 Bluetooth® ChassisEar

• Wirelessly aids in pinpointing noise, vibration, and harshness anywhere in a vehicle • Comes with 4 Bluetooth® Modules, 4 sound sensor clamps, and one sound wand (wireless stethoscope) • Visualizer, equalizer, and recording capability enable higher level analysis of noises • Email sound files to other technicians for a second opinion or to the customer to ensure the proper noise is being fixed • Works with Windows 7 & 8 and most Android Devices with free downloadable app

AULMV105 MaxiVideo Digital Inspection Camera 5.5MM

JSP97202

Wireless ChassisEAR® • Detects squeaks and rattles throughout a car or truck’s chassis • Noises can be transmitted up to 50 foot from transmitter to receiver allowing Wireless ChassisEAR® to be used on larger vehicles • No messy wires to string • Hear noises that can not be duplicated in the stall • Quickly pin-points source and location of noise

• 5.5MM Head • Turns your MaxiSys tablet into a video inspection scope •U  SB connector • No external power source needed • Still image or video capture The MV105 Digital Inspection Camera is designed to work with MaxiSys Series products or PC based products. It turns your MaxiSys tablet into a video inspection scope, allowing you to examine difficult-to-reach areas. Records digital still images and videos. Provides an economical solution for inspection.

AULMV108 MaxiVideo Digital Inspection Camera 8.5MM

• 8.5MM Head

39


engine service OTC5039 Charged Air Cooler Tester

• This is the easy way to find air leaks in the charged air cooler systems used on class 7 and 8 truck engines • Features a large 2-1/2”, 0-60 PSI pressure gauge, regulator and relief valve, and two safety cables • Also has quick disconnect air fittings that attach to a 3”, 3-1/2”, or 4” cooler hose

OTC7319 Pilot Bearing Puller 7/8” to 2”

• Capacity: 7/8” to 2”. I. D. reach: 1”. • Weight: 3 lb., 8 oz. Designed to pull flywheel pilot bearings in close quarters where a slide hammer cannot be used. Operates on many models with engine in chassis.

OTC6770 Ford 6.0L Diesel Service Tool Kit

OTC5071 Cummins Water Pump Pulley Remover / Installer

• 8 of our popular 6.0L diesel service tools in one convenient kit • Properly test vehicle systems for leaks and blockage • Safely remove and re-install harnesses without damage • Includes fuel filter cap wrench as well as glow plug and injector harness release tools • Also includes oil line disconnect tool, EGR removal tool, IPR controller, IPR socket tool, and fuel rail pressure adapters

OTC5079 Heavy Duty Power Steering Pump Analyzer

• Troubleshoots problem components in a heavy-duty power steering system • Flow and pressure reading meter measures both 1 to 10 gallons oil flow and up to 3,000 PSI of pressure • When connected in line, this universal analyzer will isolate the failed components in just minutes - there is no wasted time as in trial and error methods

LTi890 Truck Brake Spring Tool

• Easily connects rear drum brake return springs • Easy one hand operation • Slotted ends on tool always hold spring at correct work angle • No need to leverage tool against a solid surface during spring installationFast, easy, and safe

KTI70306 6” Two/Three Jaw 5 Ton Reversible Puller

• Reversible jaws feature a wide face on one end and a narrow face on the other - it’s like two tools in one • Grip tightens as pressure is applied • Manufactured with heat-treated, drop-forged, alloy steel • Spread: 7”; reach: 3-1/4”

40

• This heavy duty tool is designed to remove or install water pump pulleys on Cummins L10 and M11 engines, 1991 and newer • The installer has a rugged thrust bearing that allows for friction-free pulley installation without damaging pump components

OTC7402 Universal Outside Thread Chaser

• The die cast alloy V-pad will not damage the threads • V-pads and dies can be replaced when worn out • Capacity: from 1 1/4” to 5” O.D. • Weight: 2 lbs., 13 oz. • Thread chaser, complete with 6 dies: threads per inch - 4, 5, 6, 7, 71/2, 8, 9, 1 0, 11, 11 1/2, 12, 14, 16, 18, 20,24

OTC6005A Diesel Glow Plug Removal Tool

• Removes damaged, stuck-in glow plugs on diesel engines without having to remove cylinder head, saving hours of service time • When glow plug tip is melted and plug cannot be removed without breaking it off, this tool is the only answer • Services diesels in popular 3/4 and 1/2 ton pickups • Comes in plastic storage case

LTI599 9 Piece Metric Shockit Socket Kit • Shock loose frozen nuts and bolts • Ideal for hard to reach work areas • Custom punch designed for air hammer useIncludes 9 popular metric sizes • Custom see-through blow molded case

SUN3909 10 Ton Hydraulic Gear Puller

• CR-MO alloy steel jaws for greater strength and performance • Provides up to 10 tons of pulling force with hydraulic ram • Makes 8 different pulling combinations for total versatility • Packaged in a blow molded case for ease of transportation

MLK600240 Glow Plug Drill Kit - M10x1

• Safely and effectively removes broken glow plugs in 5 easy steps 1. B  reak the electrode by turning counter clockwise with socket 2. D  rill pitch away with special 3 fluted step drill 3. T ap the left thread inside the remaining glowplug piece 4. E xtract the last pitches with thread tap and clean up the hole 5. Remove  remaining portion of glow plug with extractor and slide hammer

MLK600121 Small Slide Hammer for use with the MLK600240 • Regular M10 tread


engine service

TRANSMISSION

TOOLS

OTC5044 Self-Adjusting Clutch Rotating Tool

• This handy tool replaces the self-adjuster mechanism on Spicer self-adjusting clutches, allowing you to manually adjust them with a wrench or socket • 3/4” hex drive

Truck Clutch Alignment Shaft O.D. Pilots

• Designed for use on heavy duty single, two-plate, push/pull, manual, and self-adjust clutches • Shaft is constructed of lightweight fiberglass-reinforced nylon that won’t hang up in clutch disc splines • Rugged and will easily support the weight of heavy pressure plates OTC7073A - 1-3/4” OTC7074A - 2”

OTC7028 Clutch Adjusting Wrench for Spicer Clutches • Adjusting wrench • For internal adjustment of multiple lever and angle- spring clutches.

OTC7057 U-Joint Remover Tool Set

OTC7075 Transmission Output Shaft End Yoke Remover

• Works on 16N, 17N, 18N and 1710 series U-joints and spicer 1600-1610 to 1180 series U-joints • Includes plastic storage box, No 1036 2-jaw puller and instructions • Weight: 16 lbs., 3 oz

• Transmission Output Shaft End Yoke Remover • Will remove end yokes from 600/1610-1810 series transmissions • Works on Fuller twin-countershaft transmissions • Lifetime limited warranty

OIL CHANGE LIS53250

Swivel Style Oil Filter Wrenches CHA212

Part# Size Style LIS53250 4-1/8” - 4-1/2” Swivel LIS54200 4-5/16” - 4-3/4” Cummins & Detroit Diesel LIS54300 5-1/4” - 5-3/4” Caterpillar

CAL291

Oil Filter Pliers Part#

Size

CHA212

4-1/4” - 108mm

CHA215

5-1/2” - 140mm

CAL291

3-1/4” - 7”

CAL302

2-1/4” - 5-3/4”

IPA7899

1.5” - 12”

IPA7899

CHAOF1 2 Piece Oil Filter Plier Set

• Fits Davco Diesel filter models, 232-233-234 • Durable, stainless steel construction • Opens vent cap also

FUEL

• Works on any diesel engine to test compression up to 1000 PSI and 7000 kPa • Features include a check valve, push button compression release, and a quick disconnect fitting on the hose end • Straight and 45 degree hose connectors are included

• All metal wrench to remove and install bowls on newer Paccar Chassis Mounted Fuel Filter Assemblies •H  alf-moon design allows easier access to the fuel filter found on Kenworth, Peterbilt, and Cummins diesels • Laser-cut steel provides strength to loosen even the toughest bowls • Thick padded grip for comfort

OTC6914 Davco Diesel Filter Wrench

• CHA212 - Oil Filter Pliers: Capacity 2-3/4” - 4-1/4” • CHA215 - Oil Filter Pliers : Capacity 2-1/2” - 5-1/2” • Channellock blue comfort grips

OTC5021 Universal Diesel Engine Compression Gauge

LIS61060 Diesel Filter Wrench for Paccar

OTC6915 Davco Diesel Filter Wrench

• Fits Davco Fuel filters 382 and 384

SYSTEMS

OTC6067 Ford Injector Remover/ Installer Kit

• Removes and installs injectors without damaging the injector or cylinder head Application: 1994–2003 Ford 3/4and 1-ton trucks, Super Duty trucks, and vans with 7 .3L direct-injected turbocharged (DIT) diesel engine.

OTC6069 Cummins Diesel Fuel Injector Remover Kit

• Kit contains a fuel injector connector tube remover and fuel injector puller • T he fuel injector connector tube must be removed before removal of the injector, or both will be damaged Application: 1998-1/2–2002 Dodge pickups and vans with 5.9L 24-valve Cummins diesel turbo engine. 41


lubrication & FLuid handling FILTER

OTC1877 25 Ton Capacity Heavy Duty Oil Filter Crusher

• Handles the big filters (up to 6” diameter and 12-1/2” long) found in trucks, construction equipment, farm implements • Crushes filters to 1/4 of original size, removing up to 95 percent of filter’s oil capacity • Automatic cycle feature: load the filter, push a button, and walk away • Air/hydraulic pump works on standard shop air (requires 9 CFM at 100 psi) • Built-in floor stand (completely assembled)

OTC1896 25 Ton Capacity Air/Hydraulic Automotive Oil Filter Crusher

• Crushes automotive and heavy-duty filters up to 15-1/4” long and 6” diameter • Filters are reduced to 20 percent of original size, with 95 percent of residual oil removed • Automatic cycle feature lets you load the filter, push a button, and walk away • Powered by 2 hp electric/hydraulic pump, 230 volt, 20 amp, 60 cycle, single phase, 3,450 rpm • Has 2-gallon reservoir

CRUSHER

DOWHDC150 Heavy-Duty Truck Filter Crusher

• Heavy-duty aluminum frame cabinet surrounds the high pressure hydraulic hose for added safety and shields components from damage • Handles filters 13” in height; 6” in diameter • Unitized construction allows for easy maintenance • Easy to operate: Load the filter and close the door to activate the crushing cycle • S pecially designed door channel prevents drips and leakage, keeping oil in the chamber and not on the floor

DOWFS400 Deluxe Floor Stand

• For AFC-100-94 and HDC-150-94 • Accommodates a 16-gallon drum • Measures 28”W x 23”D x 38”H.

DOWFRL1 Filter Regulator/Lubricator

• Required with use of filter crusher • Easily attaches to air-fitting on wall of either filter crusher

OTC1821 10 Ton Capacity Air Operated Oil Filter Crusher

• Crushes up to four automotive filters (3-7/8” diameter x 9” high) at one time, in approximately 20 seconds • Engineered and built for dependable operation • 100 percent air operation eliminates electrical connections • Generous size of crushing chamber easily accommodates the largest automotive spin-on filters • Includes mounting stand, No wall mounting or time consuming installation required

FILTER

• Save on disposal costs and storage space • Fulfills EPA and other mandated environmental standards • No mess design operates clean and efficiently to lessen spill hazards • Single control valve operation • Exclusive X-shape bevel in press head prealigns filters for absolute vertical press

EVACUATION

LIN3639 25 Gallon Used Fluid Combo Drain / Evacuator • Powerful compressed-air operated venturi vacuum quickly draws fluids from reservoirs • Includes Mercedes, BMW, and VW dipstick tube adapters, and six evacuation wands of varying flexibility • Convenient tool tray for storing vital tools and drain plugs, also includes tank-mounted clip and handle hook to secure discharge and evacuation hoses • Powerful compressed-air operated venturi vacuum quickly draws fluids from reservoirs • Supported by heavy-duty 4” swivel casters and 6” fixedaxle wheels 42

BENRP20FC Oil Filter Crusher

UNRUFC850 Pneumatic Pail and Oil Filter Crusher • Reclaims up to 95% of oil from used oil filter • Reduces trash volume up to 75% • 7 ton force at 120PSI • Crushes filters and cans up to 12.6 inches and 16.5 inches high • Safety door locks before crushing cycle begins


lubrication & FLuid handling FLUID

DRAINAGE & WASTE

DOWJDI-22DCX 22 Gallon Oil Change Station

LIN3626 Black Polyethylene Used Fluid Drain, 26-Gallon

• Built-in filter drains easily holds 4 to 5 standard automotive filters, eliminating the need to transfer filters to separate container for draining prior to disposal • 2” port opening allows easy access from the top of the drain for oil evacuation • 16” heavy duty polypropylene funnel

• Durable, lightweight, corrosion resistant polyethylene • Durable 4” swivel casters and 10” fixed-axle wheels • Large 17” diameter offset funnel rotates to catch streaming oil and includes a removable filter screen • Funnel height adjusts from 50 to 75 inches and a 3/4” male camlock style connector extends from the top of the tank for quick, clean fluid extraction using a diaphragm pump or other fluid transfer system • Three large pocket recesses are ideal for allowing used filters to drain. Built-in, easy-to-read fluid level sight gauge

DOWJDI-27GFD 27-Gallon Portable Poly Oil Drain

• Polypropylene tank with 4” Heavy Duty casters • 16” deep drain funnel with expanded metal screen - height adjustments from 45” to 70” • Built-in fluid sight-glass shows fluid level in tank • Empties by gravity valve or pump assistance

LIN3635 25 Gallon Used Fluid Drain

• Convenient tool tray for storing vital tools and drain plugs, tank-mounted clip and handle hook to secure discharge hose • 15” (380 mm) diameter drain bowl with removable filter screen and 24” (610 mm) wide-mouth funnel extension • Welded steel tank supported by heavy-duty 4” (100 mm) swivel casters and 6” (150 mm) fixed-axle wheels • Funnel height adjusts from 51” to 76” (130 to 195 cm) • 7’ long nylon-reinforced discharge hose with steel J-hook and tethered drip plug • LTL Shipping Only

DOWI25HDC 25 Gallon Self Evacuating Oil Drain • Uses air pressure to empty tank • Removeable 6 ft. Quick-Disconnect discharge hose • 16” deep drawn offset funnel with expanded metal screen • Swivel base on funnel makes positioning easy

Hit the road with

pig truck spill kits!

NPGKIT624 NPGKIT622 NPGKIT626

Be ready for leaks and spills on the go with these kits designed just for trucks. • Styles and sizes to fit any truck, including big rig, box truck or pickup; store in cabs, compartments, beds & more

• Packed with PIG Absorbents and other spill response supplies for cleaning up oil, gasoline and other vehicle fluids

• Super-durable, hi-viz fabric and rugged construction won’t rip or tear; tough enough to refill and reuse

Also available in oil-only versions, heavy-duty buckets and large storage boxes!

NPGKIT622 Stowaway Bag

NPGKIT624 Tote Bag

World’s #1 Absorbent Brand

NPGKIT626 Duffel Bag (Small)

330758 ©2014 New Pig Corporation. All rights reserved.

43


lubrication & FLuid handling FLUID

DRAINAGE & WASTE

$75 REBATE

OTC5077A 15 Gallon Transfer Tanker with Electric Pump

• Pump moves 5 gallons of liquid per minute through 8 ft. hose (110V) • New fully enclosed electric motor

with purchase of either OTC5077A OR OTC5097 Visit boschrebates.com to participate/redeem Offer good April 1 through December 31, 2016

OTC5097 Lo-Profile Transfer Tanker with Pneumatic Pump • Same features as the OTC5077, but with Pneumatic Pump

DOWJDI-17PLP 17-Gallon Poly Low-Profile Oil Drain • T-Handle folds for handy storage • (4) 5” heavy-duty casters • Expanded metal shield • Gravity drain valve • Lightweight and dent resistant

DOWJDI-17PK Pump Kit for the DOWJDI-17PLP 17 Gallon Poly Low Profile Oil Drain

LIN3669

Low Profile Truck Drain with Electric Pump • Includes 120v electric discharge pump for fluid evacuation • Low profile design can be easily positioned under high-clearance vehiclesLarge 17 gallon (65 liter) capacity reservoir • Reservoir molded of high-impact polypropylene and four large 4” (100 mm) diameter swivel casters • 6 ft (1.8 m) long discharge hose with 3/4” male camlock connector for external pump Collection of used fluids including motor oil, transmission fluid, and coolant from under high clearance vehicles.

• 110v Electric Pump • 8’ Evacuation Hose • All Necessary Fittings to Assemble to DOWJDI-17PLP • Allows for easier evacuation of fluid • Complete pump kit

DOWJDI-LP4 Low Boy Oil Drain 17 Gallon Capacity

• 48” long x 25” wide x 9 high • 9 low profile • 6” casters • G  ravity or pressure drain

LIN3665

Low Profile Truck Drain

LIN3667

Low Profile Truck Drain with Manual Pump

DOWJDI-EK Evacuation Kit for DOWJDI-LP4

• Includes all parts necessary to empty DOWJDI-LP4 with Air Pressure • Includes air regulator and safety valve, 10 ft. hose, drain plug and mounting hardware • Drain not included

LIS19202 60 Quart Low Profile Truck Drain with Lid

• For large capacity crank cases or radiator systems • The drain holds 60 quarts and is equipped with four rollers and a handle for transport and easy positioning under trucks • Cover and curved side design help keep oil from spilling during movement • Convenient handles and pour spout facilitate oil evacuation • Supersedes 19122

44


lubrication & FLuid handling FLUID

DISPENSING LIN2424 3:1 55 Gallon Drum Series 25 Pump

LIN4417 Grease Pump Assembly - #120 Drum

• 40:1 ratio professional quality pump assembly for the automotive repair shop • Includes 7’ hose, control valve, universal swivel for easy operation, drum cover • Flexible follower plate for positive prime • 4 caster band-dolly for easy mobility around the shop

LIN6917 Air-Operated Portable Grease Pump Package

• Lincoln’s time tested 50:1 double acting grease pump is at the heart of the package • High volume and pressure to handle additional hose length and/or adapt to hose reel • Smooth, easy to use and quiet for improved environment, ergonomics

LIN989 Heavy Duty Grease Pump for 25-50 lb. Drum

• Steel cover securely clamps to any 25-50 lb refinery container • Follower plate assures positive prime at lowest temperatures • Cover is rust-proofed and finished in Lincoln red Bucket shown is NOT included.

LIN9917 Heavy Duty PMV Grease Pump with Caster Base for 50:1 - 120 lb. Drums

• Twice the output of standard pumps, for longer life on the same job • Smooth and quiet, improves the environment for the shop as well as customers

LIN1387 Premium 3-Vane Rotary Fuel Pump with Hose • FM APPROVED • Fluid Types: Gasoline, Diesel, Kerosene, Coolant, NonCorrosive materials, Medium viscosity petroleum based fluids, hydraulic oils, ATF

LIN1385 Premium 3-Vane Rotary Pump without Hose

• Graphite Three-Vane Design for exceptionally smooth fluid flow for no-splash fills • High-tolerance micro-finished bore and vanes provide outstanding pump life

• Motor oil, ATF, gear lube and other fluid lubricants • Balanced double-acting pump design provides uniform output and stroke for less pulsation • Lightweight, corrosion– resistant zinc head casting design incorporates uniform wall thickness

LIN1385H Premium 3-Vane Rotary Pump with Hose

• Internal-check prevents drain-back assures immediate restart • Approx 1 Gallon per 12 Revolutions • Self Priming / Outstanding vacuum

LIN9989 Heavy Duty PMV Grease Pump for 50: 1, 25 - 50 lb.

• Twice the output of standard pumps, for longer life on the same job • Smooth and quiet, improves the environment for the shop as well as customers • Reduced cost of ownership for the life of the pump

LIN917 Air Operated Grease Pump

• Will dispense 45 ounces or 80 cubic inches of NLGI 0-2 grease per minute at 150 PSI. • Assures ­­­ positive prime at lowest temperature • Drum cover 46007 finished in Lincoln red; roll-a-round base 80895 base in black; air motor cover in white • Height 43-1/8” • Base 17” square Drum not included.

LIN82050 Chassie H Pres Pump

• Grease Pump-Bare For 120Lb • L ightweight, corrosion-resistant zinc head casting design incorporates uniform wall thickness and an integral patented muffler which keeps noise level below OSHA standards • 1 50 psi pre-lubricated air motor requires no external oiler

LIN1550 Heavy Duty 12V DC Fuel Transfer Pump, 15 GPM

• Safely transfers Diesel, Kerosene and Mineral spirits, delivering up 15 gal./min • T hree-piece telescoping pick-up tube supports a very wide range of tank depths • Pre-wired electrical box allows for easy set-up. Fully serviceable. 18 ft. (5,5 m) cable for operator convenience • Weatherproof cast-iron design with high-flow 1” inlet and outlet • 360 degree locking 2-inch bung for perfect nozzle positioning 45


lubrication & FLuid handling FLUID

DISPENSING

MTNHR250 1/4” x 50’ Grease Hose Reel

• 5000 lb. operating pressure • All brass main shaft and swivel • 5-1/4” width and 14-7/8” diameter • 2 Wire braided hose • Works for grease • Owner serviceable • Cartridge style spring • Fully closed bead • Excellent for off-road truck mounted applications • 1 year warranty on material and workmanship

MTNHRM550 1/2 in. x 50 Ft. Air, Water and Heavy Oil Hose Reel

• 2500 lb. operating pressure • Works for air, water and heavy oil • All brass main shaft and swivel • 5-1/4” W and 14-7/8” diameter • Owner serviceable • Cartridge style spring • Fully closed bead • 1 year warranty on material and workmanship

LIN94354 Medium Pressure Oil Reel Assembly 50’ x 1/2”

• Made in the U.S.A. - all steel construction • Inlet/Outlet swivel fully ported for unrestricted maximum flow, dispensing higher volumes of liquid • Dual needle bearing design provides a smooth balanced operation • 1 80 degree double ratchet teeth provide solid latch to lock hose in multiple positions • Powder coated finish for longer life in your shop

FILFR112 Complete Hand Rotary Pump • 10 gallons per 100 revolutions • UL approved • Cast iron rotor • Can be used to pump in reverse

DOWJDI-35-UL UL Listed, 2 Way Rotary Hand Pump • Self-priming • Heavy duty cast iron design • Pumps one gallon per 12 revolutions

Cast aluminum Fill-Rite pump provides smooth, continuous transfer of medium viscosity liquids, as well as oil, gasoline and diesel fuel. Improved seal keeps water out. Built-in check valve and strainer. Pump easily mounts to a standard drum with 2in. NPT. Antisiphoning device, hose with static wire and a 22” to 40” telescoping suction pipe. Padlockable pump can be set up for reverse flow and is adaptable for drums, kegs or storage tanks. U.S.A.

FILFR152 Piston Style Hand Pump

• Stainless steel inner liner • “Easy mount” 2” tank adapter • Pump flow can be reversed by rotating piston 180° • Anti-siphoning device

FILSD62 Rotary Vane Hand Pump

MLW2446-21XC M12™ Grease Gun Kit

• Delivers over 8,000 PSI for heavy duty applications • Superior run-time - up to 7 grease cartridges per battery charge • M12™ XC LITHIUM-ION Battery Pack - 20+ Tools in the M12™ Cordless System • M12™ Grease Gun Kit Includes: grease gun, (1) XC Battery, charger and carrying case.

MLW2446-20 M12™ Grease Gun Only

• 2” NPT threaded bung adapter • 1” polymer suction pipe adjusts for 15 to 55 gallon drums • S moothly pumps medium-viscosity oils, diesel fuel and non-corrosive fluids

FILFR1210G 12 Volt DC Pump with Manual Nozzle • Up to 15 GPM • 1/4 HP motor • Diesel/Gasoline/Kerosene/E15/BD up to B20 • 2” Threaded base for tank mounting • Heavy duty cast iron construction

FILSD602G 115V AC Pump with Manual Nozzle

• 13 GPM (49 LPM) • 1/4 HP Motor • UL/cUL listed pump and motor • Heavy duty cast iron construction • Diesel/Gasoline/Kerosene/E15/BD up to BD20

MLW2646-21CT M18™ Cordless 2-Speed Grease Gun Kit with 1 Battery

• Industry leading 10,000 PSI max operating pressure • New to world precision through pre-set grease c­­­ounter lbs • Best in class 48” flexible hose The kit includes (1) M18 battery and the new multi-voltage charger, so you can charge all M12 and M18 lithium-ion batteries with one charger. 46

FILFR1612 DC Power Cast Iron Rotary Vane Pump • Self Priming • Includes battery cable with clips and 30 amp fuse • Inlet and outlet size ¾” NPT • Compatible with Diesel and Antifreeze

This light duty rotary vane transfer pump is portable and self priming. The pump is cast iron and produces a flow rate of 10 GPM. It is powered by DC voltage. Battery cable with clips is included. The pump is compatible with diesel and antifreeze fluids.


lubrication & FLuid handling FLUID

DWTDCGG570K 18V Grease Gun Kit

DISPENSING

• Powerful Motor and Pump Delivers 10,000 psi @ 5.0oz/min Delivers HiPressure for clogged grease fittings and Hi-Volume for fast applications • Extra-Long (42”) Grease Hose For reaching hard to access grease fittings • Bright LED Light Assists in locating tucked away and hard to find grease fittings

IRTW7150-K1 IQv20 Lithium-Ion 1/2” Drive Impact Wrench Kit with Charger and One Battery • 1,100 ft/lbs of Nut Busting Torque from a tool weighing only 6.8 lbs • DURABILITY – High power Lithium-Ion battery with all-metal drive train and reinforced housing • COMFORT – Optimized balance combined with ergonomic handle and rubber over-molded grip •B  acked up by Ingersoll Rand’s industry leading 1-2-3 Warranty

LIN3665 LIN3667 LIN3669

Models 3665, 3667 and 3669 low-profile truck drains • 17 gal. (65 liter) capacity with large 20 x 29 in. (508 x 737 mm) fluid collection area • 7 3/4 in. (195 mm) overall height • 6 ft. (1,8 m) long discharge hose • Long, pivoting t-handle aids positioning 3 • /4 in. camlock style connector with leak proof cap • Removable metal screen • Molded high-impact polypropylene construction

• Recessed pockets for filter and plug storage • Four 4 in. (101,6 mm) diameter swivel casters • Three discharge methods – Connect to a diaphragm pump or other fluid transfer system – Manually-operated rotary hand pump – 120 V electric pump

Model 3665 Model 3667

with rotary hand pump

Model 3669

with 120 V electric pump

An SKF Group Brand

47


lubrication & FLuid handling FLUID

LIN1244 12 Volt Cordless PowerLuber® Grease Gun with Battery Kit • Powerful 12 volt motor • Planetary gear drive • High capacity 12 volt NiCad battery • Machined and hardened piston

Kit includes: 110 volt fast charger, (2) 12 volt Ni-Cad rechargeable batteries, 30” flex hose with spring guard and custom carrying case.

LIN1242 Kit with 1 Battery

DISPENSING

LIN1884 20-Volt Lithium Ion PowerLuber Kit (Dual Battery) • LCD identifies: Empty Cartridge, Loss of Prime, Grease Output and Blocked fitting • Lithium Technology, Powerful, Efficient and Long -Lasting • Built-in LED light illuminates dimly lit areas • Electronically controlled two-speed motor • Stable 3-point stance keeps the tool upright and within reach • Balanced, lightweight design

LIN1215 12 Volt Charger For PowerLuber

LIN1013 Heavy Duty Grease Gun with 16 oz. Bulk/14.5 oz. Cartridge

• High-output setting delivers twice the grease per stroke and high-pressure setting for high-tolerance joints and bearings • Has a unique extension that can rotate 360° for hard-to-reach areas • Exceeds 7000 psi pressure

LIN1134 Extra Heavy Duty Pistol Grip Grease Gun • Same features as LIN1133 except with Extra Heavy Duty Pistol Grip and 6” tube

LIN1844 18 Volt Cordless Grease Gun with 2 Batteries

• New 18-volt high-capacity battery delivers up to 10 grease cartridges • 2-speed transmission provides high-volume or high-pressure output • High-strength composite body and casting provide outstanding durability without weight penalty • Dual overload protection

LINAC2440 120-Volt Corded Grease Gun

• Variable speed trigger combines with the 2-speed transmission for excellent flow controlHigh-efficiency combination valve purges trapped air

LIN1142 Heavy Duty Lever Gun

• Rugged cast iron pump head • Jam proof toggle mechanism • Capacity: 16 oz. bulk or 14.5 oz cartridge

LIN1162 Fully Automatic Pneumatic Grease Gun

• 30” high-pressure hose with coupler and attachment clip • Air operating range 40-150 psi, and has greasing capabilities of 6000 psi

LIN1147 Heavy Duty Lever Gun • Same features as LIN1142 but with 18” whip hose

48

The pump ratio: 40:1 at 150 psi Maximum Grease Pressure: 6,000 psi (414 bar) Air Pressure Range: 40- 150 psi (2.8 - 10.3 bar)


lubrication & FLuid handling

TRUCK SPILL KITS

• Durable fabric and rugged construction won’t rip or tear; tough enough to refill and reuse • Designed just for trucks! Packed with PIG® Absorbents and essential spill supplies for cleaning up oil, gas and other vehicle fluids • Hi-viz yellow bag with reflective striping is easy to find; increases driver visibility and safety during spill response

NPGKIT631 PIG Oil-Only Truck Spill Kit in Bucket

• Oil-only absorbents soak up small leaks and spills of motor oil, gasoline and other oil-based vehicle fluids - but not water • 6.5-gallon bucket kit is ideal for placement in truck beds and large external compartments on a truck or other vehicles • Can be mounted to your truck’s exterior using an aluminum Truck Mounting Bracket (BKT213, sold separately); helps save floor space and secure bucket in place during transport • Black color won’t show road grime and helps protect contents from UV degradation • Polyethylene bucket with gasketed screw-on lid can be used to ship or temporarily store used absorbents (UN Rating 1H2/Y30/S for Packing Groups II and III)

NPGKIT626 PIG® Truck Spill Kit in Duffel Bag

• Compact duffel bag design fits in the cab or inside a long, narrow external compartment of a truck or other vehicles • End strap and carrying straps make it easy to pull bag from its storage space and take supplies to the spill Kit Includes: • (3) 3” x 48” L PIG® Blue Absorbent Socks • (15) 15” W x 20” L PIG® Absorbent Mat Pads • (1) 3.25” x 1.75” H PIG® Plug-N-Seal® No-Freeze Patching Paste • (1) 13” L Showa-Best Chem Master(TM) Neoprene Gloves • (5) 18” W x 30” H Polyethylene Disposal Bags

• (1)  Collapsible Container • (1) Economy Goggles • (1)  Apron • (1)  Lightstick • (1) Instructions

NPGKIT625 PIG Oil-Only Truck Spill Kit in Tote Bag

• Oil-only absorbents soak up small leaks and spills of motor oil, gasoline, and other oil-based vehicle fluids - but not water • Cube-shaped tote bag design fits in a mounted storage box or large external compartment of a truck or other vehicles • Carrying straps and shoulder strap make it easy to pull bag from its storage space and take supplies to the spill

NPGKIT624 PIG® Truck Spill Kit in Tote Bag

• Cube-shaped tote bag design fits in a mounted storage box or large external compartment of a truck or other vehicles • Carrying straps and shoulder strap make it easy to pull bag from its storage space and take supplies to the spill Kit Includes: • (4) 3” x 48” PIG® Blue Absorbent Socks • (25) 15” W x 20” L PIG® Absorbent Mat Pads • (1) PIG® LITE-DRI® Loose Absorbent • (1) 10” W x 12” L PIG® Premoistened Hand and Surface Wipers • (2) 3.25” x 1.75” PIG® Plug-N-Seal® No-Freeze Patching Paste • (5) 18” W x 30” H Polyethylene Disposal Bags • (1) 13” Showa-Best Chem Master(TM) Neoprene Gloves

• (1)  Dustpan/Broom • (1) Economy Goggles • (1) Collapsible Container • (1) Apron • (1) Lightstick • (1)  Instructions

NPGKIT629 PIG Oil-Only Truck Spill Kit in Duffel Bag

• Oil-only absorbents soak up small leaks and spills of motor oil, gasoline and other oil-based vehicle fluids - but not water • Duffel bag design fits inside a long, narrow external compartment of a truck or other vehicles • End strap and carrying straps make it easy to pull bag from its storage space and take supplies to the spill

NPGKIT622 PIG® Truck Spill Kit in Stowaway Bag

• Space-saving, suitcase-style spill kit stashes behind or underneath your truck seat to keep you prepared for spills on the road Kit Includes: • (3) 3” x 48” PIG® Blue Absorbent Socks • (40) 15” W x 20” PIG® Absorbent Mat Pads • (2) 3.25” x 1.75” PIG® Plug-N-Seal® No-Freeze Patching Paste • (1) 13” Showa-Best Chem Master(TM) Neoprene Gloves • (5) 18” W x 30” H Polyethylene Disposal Bags

• (1) Apron • (1) Economy Goggles • (1) Lightstick • (1) Instructions • (1) Collapsible Container

NPGKIT623 PIG Oil-Only Truck Spill Kit in Stowaway Bag

• Oil-only absorbents soak up small leaks and spills of motor oil, gasoline, and other oil-based vehicle fluids - but not water • Suitcase-style stowaway bag is designed to fit behind or underneath the seat of a truck or other vehicles to keep you prepared for spills on the road • Three interior compartments help segregate contents for faster response 49


lubrication & FLuid handling

FUEL CADDY

DIESEL DOWFC-P30A-UL 30-Gallon UL Listed Steel Gas Caddy - Air Operated

• UL Listed and complies with OSHA guidelines • 30-Gallon capacity steel tank • 4-way directional valve • For use with gasoline, diesel, kerosene, bio-diesel and transmission fluid

IPADTP20 Industrial Fuel Cleaner and Transfer System

• DC Powered, includes Filter and Water Seperator, two 6’ hoses and manual fuel dispenser • For Truck Service and Repair, scrapyards, emergency recovery and more! • Secure and save fuel prior to repairs, scrap, storage or sale • Uses two group 31 batteries (not included) • 1000 Gallon flow meter, voltage and amperage meters

TRANSFER

LIN3675 25 Gallon Fuel Caddy

• Large capacity 25-gallon heavy-duty welded steel tank • 2-way rotary pump dispenses or extracts fuel at a rate of 1 gallon per 12 revolutions • Easy-to-read sight gauge clearly indicates fuel volume in tank • 7’ (2.1 m) wire-reinforced fluid transfer hose with anti-spark tip and internal ground wire • Screened filler neck allows fuel to be poured in manually

LIN3677 25 Gallon Fuel Caddy with 2 Way Filter System

• Large capacity 25-gallon (95 liter) heavy-duty welded steel tank with automatic 2-way filter system uses two common spin-on filters to remove particulates • Premium 2-way rotary pumpdispenses or extracts fuel at a rate of 1 gallon per 12 revolutions • Easy-to-read sight gauge clearly indicates fuel volume in tank and a screened filler neck allows fuel to be poured-in manually

DEF THX108 DEF-CHEK Professional Tester

• Test Urea Concentrate of Diesel Exhaust Fluid • ­If mixture is 0.7% off, mfg suggest replacing the DEF and identifying the problem • Temperature compensating discs test DEF hot or cold • Tester is a cost effective tool to test DEF • IF DEF is not tested, it will cause harm to the vehicle

FILFRAP32V DEF Air Operated Pump

• 2” NPT bung adapter • Telescoping suction tube • Fluorocarbon seals • 6.5 GPM maximum, 100 PSI maximum • Polypropylene construction

FILFRHMN075S 3/4” Manual Nozzle with Hook

• Compatible with gasoline and diesel • 3/4” aluminum nozzle • Integral hanging hook compatible with all Fill-Rite products • Minimal spray pattern to reduce foaming and false shut offs • Made in the U.S.A.

FILFRHP32V DEF Hand Pump

• Hand action lever • Polypropylene construction • 2” NPT bung adapter

• 11 oz. per stroke • Telescoping suction tube

FILSP100-05N-PP-SSS 1/2” Polypropylene Air Operated Diaphragm Pump

• Ceramic Air Valve • Most efficient AOD on the market • Reinforced manifold • Santoprene elastomers • Five Year Warranty 50

PLW55-155 $174.50 DEF Rotary Barrel Pump

• Fits all 5-55 gallon pails/ drums with standard bung • Ryton® construction - Teflon® and Viton® Seals • Delivers 7 gallons per 100 revolutions

DOWDEF-1A DEF (Diesel Emission Fluid) 55 Gallon Drum Dispensing System

• The Fuel Chief System is one of the industry’s first “all inclusive” service systems for refilling a vehicle’s onboard Urea system tank • Maximum head 12’ Pumping DEF @ 5.7psi • 120 Volts, 60 Hz, 2 full load amps The Fuel Chief line has been specifically designed for the convenient and safe service of the new SCR (Selective Catalyst Reduction) systems that require filling during normal service operations. The Fuel Chief Systems were the first in the industry to receive any domestic vehicle OE approval, and in many circles are considered the leader in Urea dispensing today!

OTC5025 OTC UREA DEF Refractometer

• DEF-unique calibrated scale with 32.5% • Enables operators to clearly determine if the DEF in their vehicle consists of a 32.5% Urea / Water solution • 15-40% variance on scale • 0.5% line graduations • Complete kit provides operators everything they need to calibrate and use DEF Refractometer


DPF OTCJ47399 Horizontal DPF Handler

• The Universal mounting assembly adjusts, front to back and side to side for easy DPF handling • The height range of 6-1⁄2” to 29-1⁄2” is usable for most of today’s trucks • Safety strap holds the load securely while moving about the shop • Size allows for handling of all known DPFs Overall length: 34-1/2”; Overall width: 19-3/8”; max. height: 29-3/4”; Min. height: 7-1/2”; Side: 30 degrees; Tilt front: 15 degrees; Back: 15 degrees.

OTC5286 Portable Diesel Particulate Filter Cleaner

• Lightweight and highly portable - ideal cleaning system for use in the shop or on a service truck • Flexibility - clean DPFs from 6” to 15.5” in diameter using shop or compressed air of at least 100 PSI • No internal filters to clean or replace • Focused Air Jet Technology™ - concentrates a precise high pressure stream of air directly into every cell • Rugged design provides maximum durability

OTC5281 DPF Thermal Processing Unit

• The 5281 DPF Thermal Processing Unit is a device which will thermally regenerate a DPF unit at a controlled, pre-programmed rate. S ometimes, the DPF cannot be regenerated on the truck due to a failure with the vehicle’s own regeneration system, or in the case of retrofit applications, a lack of an on-vehicle regeneration system. Thermal regeneration of DPFs is used in conjunction with the OTC 5280 DPF Cleaner, and maximizes the cleaning efficiency of the cleaner. Designed to facilitate the cleaning of dirty filters – especially those with high amounts of wet soot, and unburned hydrocarbons. • Pre-programmed thermal profile controls temperature ‘ramp up’ and ‘cool down’ to protect DPF from thermal shock, reducing the risk of DPF cracking. • Holds temperature constant for two hours to ensure complete regeneration of filter. • Built-in safety door lock and electronic door switch prevent unauthorized opening of the door when temperatures exceed 200 degrees F. • Large chamber accommodates various DPF sizes and shapes. Front access door allows for easy access to the thermal chamber. • Includes both standard cycle and “pre heat” cycle for oil-soaked filters. • Internal chamber dimension: 24” (L) x 24” (W) x 26” (H).

OTC5280 (DPF) Cleaner

• OE tested and Dealer recommended – By many major diesel engine manufacturers. • Robust design – For long shop life. Can be used as part of a preventative maintenance program. • High Pressure cleaning process for thorough cleaning of ash from DPF – produces 10 times the burst energy of competitive low pressure units. • Initial Burst Quick check – To identify filters too plugged for proper cleaning. • Movable with locking wheels – For placement throughout the shop. • Computer Controlled Process Based on OE Requirements – for “Start to End”cleaning without constant technician monitoring. • Containment of hazardous ash – For easy disposal. • HEPA Filter Air Exhaust System – To exceed environmental air standards for shop. • Operates on standard 115V outlet. • Proven to clean to over 92% efficiency. (3) (3) Third-party OEM test results using pin gauge measurement with approved SPX adapters and burst cycles. Actual results may vary.

51


lifting & hydraulics

BENHDS-35 35,000 Lb. Capacity / Standard

• CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493 • Supersized 12” diameter cable sheaves • Stainless steal lifting cables • Grease nipples • Single hydraulic under-runway cylinder • Integrated flow restrictor • Durable powder coat • Spring-loaded safety locks

BENHDS27X 27,000Lb Capacity H.D. 4 Post Lift

BENHDS-35X 35,000 Lb. Capacity / Extended

• CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493 • Extended length runways • Single hydraulic under-runway cylinder • Integrated flow restrictor • Spring-loaded safety locks • Second lock system on constant guard • Fully enclosed lifting cables • Multiple adjustable height locking positions • Maintenance-free electric hydraulic power system • Conveniently positioned operator controls • 12” x 12” base plates Features extra-wide runways to accommodate a wide variety of vehicle configurations.

• CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493 • Supersized 12” diameter cable sheaves • Stainless steal lifting cables • Grease nipples • Single hydraulic under-runway cylinder • Integrated flow restrictor • Durable powder coat • Spring-loaded safety locks • Second lock system on constant guard • Fully enclosed lifting cables • Multiple adjustable height locking positions • 12” x 12” base plates

52


lifting & hydraulics

ATEATTD-MC11HYD 44,000 lb. Capacity Single Phase Hydraulic Mobile, 4 Columns • 11,000 lb. capacity per column (44,000 lb. capacity total) • Adjustable forks accommodate tire diameters from 19 1/2”- 47 1/4”220V/60Hz, 1 phase power to each column • Shipping weight: 4,400 lb. • 1 year warranty on material and workmanship

The Atlas® MC11000 1-Phase Adjustable mobile column lift system includes 4 (11,000 lb. capacity each) mobile columns. This 44,000 lb. capacity may be increased by adding more columns. The original lifting 44,000 lb. capacity (4 columns) can be increased (by purchasing additional columns and connection plugs) to either a 66,000 lb. six (6) column system or a 88,000 lb. eight (8) column system.

ATEML-4034BC 74,000 LB Capacity Battery Powered, Motor Column Lift System, ALI Certified

• 18,500 lb. capacity per column (74,000 lb. capacity total) • Simultaneous operation of all columns • Electronic system ensuring synchronization of all columns • 5-year structural warranty • 3-year warranty on electronics and hydraulics The 74,000 lb. capacity battery powered, four (4) piece mobile column lift system (ML-4034BC) is now available. This 24V DC motor and battery powered ALI Certified system works anywhere; it is not dependent on a wall socket. This system is designed and engineered for bus, RV, and truck lifting applications that require high quality and reliability.

AIR LIFTS

INT3400A 10 Ton Capacity Air Lift Jack

• 10 ton capacity achieved at 200 PSI air supply • Heavy duty air valve offers accurate lift control • Removable “T” handle for easy storage • Extension tubes offer multiple lifting and locking positions

SUN6710 10 Ton Portable Air Lift Jack

• 8” pneumatic wheels for easy maneuverability • Air valve for proper speed control • T-handle & 8’ air hose for safe positioning & operation • Extension tubes & detent pins for multiple lift heights & support • Ridged saddle with locating lugs for gripping load 53


lifting & hydraulics

AIR & END LIFTS

OMEHW93690C 10 Ton Air Operated End Lift with High Lift 10 Ton Stands

• Lifts 10 tons at 200 psi • 2-12” pneumatic rear tires and 2-6” casters for easier transport and positioning under load • Less maintenance with one large cylinder • Pin style column adjust in 2 inch height intervals on jack stands • Ideal for fleet, agricultural and construction maintenance

OTC1520 10 Ton Mobile Vehicle Lift System

• System can be rolled to the vehicle anywhere in the shop or outside on a level surface • Unique design provides lift from the tires, not the frame or axle members - Ideal for situations where limited ground clearance or a lack of clear access complicates lifting • Single controller operates both sides of the system for a smooth, level lift up to two full feet from the bottom of the tires to the ground • Units can double as support stands when retention pin is inserted • Covered by OTC Lifetime Marathon Warranty

PREPAID FREIGHT

OTC1590 10 Ton Air Lift for Trucks and Trailers

• Adjustable lifting saddles and an extra wide stance for extra stability • 10 ton lifting capacity at 200 PSI air supply • Lifting range is 13” to 52” with a 14” reach • An automatic mechanical safety catch engages in five height positions, it must be manually released to lower the load • Two large swivel casters and pneumatic tires make it easy to maneuver, even on loose gravel

PREPAID FREIGHT

INT3598-SP3 10 Ton Air End Lift With 10 Ton Truck Stands

• 10-ton capacity achieved at 200-psi air supply • 4” x 6” steel saddles adjust between 36” and 50” widths • Saddle arms reversible for low height • Three-way air valve • Automatic mechanical safety lock 54


lifting & hydraulics SERVICE

JACKS

OTC1507B Stinger 5-Ton Air/Hydraulic Service Jack

4 Ton Long Chassis Service Jack with 6 Ton Jackstands

• Dual piston action provides speed to contact and power to lift • Cast lift arm for heavy loads • T handle with release knob for ease of positioning and load control • Legs on jack stands have folded metal footing to spread weight more evenly protecting parking lot surfaces and significantly reducing setting while working under the vehicle • Multi position ratchet bar on jackstands provides strength and durability • Set includes the HW93657 and HW93506.

OTC5106 6-ton Capacity Air/Hydraulic Service Jack • Huge steel front wheels are mounted in bearings for trouble-free service life • Spring-loaded handle can be locked in three positions

OTC5206 6-Ton Heavy-Duty Service Jack

• Rugged steel frame members • Rear swivel casters make spotting the jack easy • Spring-loaded handle may be locked in three positions • Air pressure: 80-120 PSI, lifting range: 5-7/8”-22”, saddle dia.: 6-5/8”, overall reach: 87”, frame height: 8”, handle length: 40” •B  ring the versatility of air-assist operation to your shop’s lifting tasks. • T he 10-ton model can also be operated manually, when shop air is not available.

OTC1505B 5 Ton Hydraulic Floor Jack

• Material: Steel • Min. height: 6” • Max. height: 22” • Net weight: 250 lbs. • Foot pedal provides easy way to pump to load

SUN6604 5 Ton Floor Jack

• Heavy gauge steel side plates prevent twisting • Hydraulic power unit is Uniweld constructed for increased strength and leak prevention • Front wheels with roller bearings & ball bearing mounted rear caster wheels provide stability & easy maneuverability.

• Ergonomic handle for user comfort and easy mobility • Built-in tray for fasteners and tools • CE marked – ASME/PALD tested

OTC1510B 10 Ton Hydraulic Service Jack

Service Jacks

• 45.75” long pump handle with release knob works independently of handle position • Load-limiting and bypass valves prevent jack from being used beyond rated capacity and over-extension of ram • Complies with ASME PALD/2009 safety standards • 2 Year Warranty on material and workmanship

KTI63155 - 5 Ton (Freight Delivery)

• 5 ton capacity service jack with a lift range from 5.75” to 22”

KTI63186 - 10 Ton

• 10 ton capacity service jack with a lift range from 6.25” to 22.5”

• A built in safety overload prevents using the jack beyond its rated capacity • Convenient foot pedal speeds the lifting operation • Has a spring loaded 40” handle Lifting range: 6-1/4” to 22”; Saddle diameter: 6”; Overall reach: 51”; Frame height: 9-3/4”. Floor space: 18” to 60”

OTC1511B Stinger 10-Ton Air/Hydraulic Service Jack • Bring the versatility of air assist operation to your shop’s lifting tasks • Can also be operated manually, when shop air is not available • Huge front wheels mounted in bearings provide trouble free service life • Rear swivel casters make spotting the jack easy

Spring loaded handle may be locked in three positions, from horizontal to vertical. Air pressure: 80-120 PSI; lifting range: 6-3/8” to 22”; saddle diameter: 7-3/8”; overall reach: 90”; frame height: 12-3/4”; handle length: 42”. 55


lifting & hydraulics SERVICE

OMEHW93660C 10 Ton Hydraulic Service Jack and Jack Stands

JACKS

OTC5210 10-Ton Heavy-Duty Service Jack

• Lifting trucks, trailers, and buses by the axle, differential, or frame • Dual piston action provides speed to contact and power to lift • Long chassis for hard to reach points • Pin style column jack stands adjust in 2 inch height intervals • Heavy duty square tubing on jack stands

• Ergonomic handle for user comfort and easy mobility • Foot pedal for quick approach of the lifting saddle to load • Built-in tray for fasteners and tools. • CE marked – ASME/PALD tested

OTC1512 20 Ton Stinger Floor Service Jack OMEHW93660 10 Ton Manual Service Jack

• Lifting trucks, trailers, and buses by the axle, differential, or frame • Dual piston action provides speed to contact and power to lift • Long chassis for hard to reach points • Handle adjusts to three pumping positions • T handle with release knob for exact positioning of a load Sealed hydraulic unit keeps out grit, grime and moisture. Large full swivel saddle and ball bearing caster make positioning easy. Cast lift arm for heavy loads. Made in the U.S.A. Comes with 2 year warranty.

OMEHW93662 10 Ton Air/Manual Service Jack

Operates manually or with air. Patented “Speed Pak™” reduces handle pumping. Uses standard shop air 110-175 psi pressure (140-175 psi for rated load).

• The 20-ton capacity with a lifting range of 7-1/2” to 24” • Low-profile stance and the extended height add to versatility • Wheels and swivel casters feature internal bearings • The foot pedal or jack handle can be used for pumping action • Counter-balanced, spring assisted handle has a three-position lock • Saddle diameter: 7-1/2”; overall reach: 97”; frame height: 10-1/4”; handle length: 42”; floor space: 18-1/8” to 61-3/8”.

OME22201 20 Ton Long Chassis Service Jack with Air

• High speed Air TurboMotor is equipped to raise the load to the desired height efficiently, effortlessly, and safely •W  ide stance and low center of gravity provide optimum stability under load stress • Heavy gauge, steel frame helps prevent distortion or twisting •H  andle actuated release valve provides precise metered control of lowering speeds • Convenient foot pedal designed for fast, no load lifts

TRANSMISSION OTC1793A Stinger 1,000 Lb. Capacity High Lift Transmission Jack

• Universal saddle tilts front to back and side to side; features adjustable corner brackets and safety chain for optimum positioning of the load • Flash-chromed rams inhibit rust from entering the hydraulic system • Foot-operated pump and lowering pedal for ease of control when positioning or removing a transmission • Wide leg base with 4” polyurethane swivel wheels that provide stability and easy maneuvering (brakes on two of the wheels) • Safety overload system to prevent jack from being used beyond its rated capacity

56

JACKS

KTI63515 1,200 Lb Low Profile Transmission Jack

• 1200 pound capacity transmission jack with a lift range from 5.75” to 31.5” • For automotive use up to pickup truck transmissions • Wide front-open chassis for lower profile when loaded • Full swivel pump handle can be accessed in any work position • Complies with ASME PALD/2009 safety standards • 2 Year Warranty on material and workmanship


lifting & hydraulics

TRANSMISSION

JACKS

INT3180-SP1 2- Ton Heavy Duty Transmission Jack Promo

KTI63517 1.5 Ton Truck Transmission Jack

• 1.5 ton capacity truck transmission jack with lift range from 8.62” to 36.625” • Front and back swivel casters allow for trouble-free positioning and maneuverability • Pump handle rotates 360 degrees for multiple work positions • Universal saddle with tilt features • Complies with ASME PALD/2009 safety standards • 2 Year Warranty on material and workmanship

• Includes INT3181 transmission adapter set FREE • Maximum tilt on saddle for easier alignment • Rugged 4” casters Jack is a heavy 375 pounds to safely remove and lift heavy transmissions without the fear of tipping over. 2” handle pivots a full 360 degrees around pump. Fully adjustable saddle with maximum tilt for easier alignment. Adjustable corner brackets.

OTC5078 Air Assisted 2,000 lb. Capacity High Lift Transmission Jack for Trucks and Buses

• For shops with in-ground or above-the-floor vehicle hoists • Low height of 41-1/2” allows transmission to be rolled out from under bus or other vehicle’s frame, a clearance problem with competitor’s jacks • Metered, foot-operated air pump allows effortless lifting of the transmission into place, controlling the load precisely during removal and installation • Operation is twice as fast as competitive jacks powered by a hand pump, and it costs less • A dedicated adapter that fits the popular Allison 500 and 600 series automatic transmissions in included Safety bypass prevents damage caused by a system overload. Covered by OTC Lifetime Marathon Warranty®.

OTC1522A

OTC1522A 2,000 lb. Capacity Low-Lift Transmission Jack (Freight Delivery)

• Rugged, stable unit is ideal for handling heavy transmissions • Includes adapter plate for Eaton® Fuller® Road Ranger® transmissions • Low profile design gets under the lowest clearance trucks, making it ideal for clutch repair work • Pump handle rotates 360° for operator convenience • Safety overload prevents use beyond its rated capacity • Height range 6-7/8” to 35-1/4”

OTC5019A 2,200 lb. Capacity Low-Lift Transmission Jack (Freight Delivery)

• The 8-1/4” low height is perfect for aerodynamic trucks with low ground clearance • Special mounting adapter (No. 540231) fits popular Eaton® Fuller® RoadRanger® transmissions used on nearly all Class 7 and 8 heavy-duty trucks. Mounting plate angle is adjusted with the turn of a wrench •D  egree of tilt: 20° back, 15° forward, 12° side to side • S wiveling pump handle permits ease of operation in restricted working spaces. • Fast-acting pump quickly raises lifting arm.

OTC528150 Adapter

• Eaton® ‘Lightning” adapter. Used with the No. 5019A transmission jack OTC5019A

OTC543284 RoadRanger Transmission Adapter

• RoadRanger® transmission adapter for Model series FRO-11210C to FRO-18210C that is equipped with an integrated cooler • Used with the No. 5019A transmission jack.

OTC553516 Differential Mounting Adapter

• Differential mounting adapter mounts easily using existing bolt patterns • Fits the most common differentials currently in use on Category 7 and 8 Heavy Duty Trucks, including: Eaton, Fuller, Rockwell, Meritor, Spicer, International, and Mack • For use on OTC 5019A / 5078 and Stinger 1522A Transmission Jacks 57


lifting & hydraulics

AXLE / TRUCK HYDRAULIC JACKS

FREE SUN6722 22 Ton Premium Air Hydraulic Truck Jack

AMN14140 22 Ton Air Service Jack

FREE 1” Drive Impact Wrench SUNSX556-6 with SUN6722 purchase While supplies last

• Full air actuation lifts saddle to lift point rapidly, eliminating downward resistance from springs • Spring-less design eliminates weathering, rusting of springs and risk of damage • Weather-proof durability with enclosed power unit • Meets ASME-PALD 2009 standards

• Air operated and easy to maneuver • Single piece handle - will not break • Extension saddles include: 1 of each, 1”, 2”, and 4” • Operates with only 80 psi of air pressure •Minimum height - 9” (185 mm); stroke length – 6” (15 cm) Backed by one year manufacturer’s warranty.

OTC1788B 22-Ton Under Axle Jack

SUN6622 22 Ton Air / Hydraulic Jack

• Narrow chassis design fits easily between tandem wheels • Release knob on top of handle operates independently of handle locking lever • Contoured chassis base to prevent damage when under a heavy load

• One pull of the handle activates the self-retracting 22-ton capacity ram without having to crawl underneath the vehicle • Long 49-1/2” T-handle lets you easily position jack under vehicles with long overhangs • Improvements include advanced seal ring material and one-piece piston air pump • Minimum Lifting Height: 8 1/4” • Maximum Lifting Height with 3/4” Saddle:  17-3/4”, 3-7/8” Saddle: 20-7/8”

SUN6744 44 Ton Truck Axle Jack W/ Air Return

• Full air actuation-raise and lower the ram with simple turn the variable speed control knob • Sturdy one piece handle ekiminates wobble and reaches 54” for safe operation • Rust prohibitive flash chromed ram for smooth operation and protection against weathering • 3.0” and 4.7” stacking adapters provide up to an additional 7.7” or each for maximum reach

ASTAJ22FE2A 22 Ton Capacity Air Over Jack with Quick Springs

• Large 8” (203mm) diameter hard rubber tires • Includes quick springs for fast ram retraction • Safety overload system prevents jack from being used beyond its rated capacity • Meets ANSI standard for performance and safety

58

OTC5093B Long Reach Under Axle Jack

• Three-stage lift capacity – 22, 38.5 and 71.5 ton • Air-driven cylinder with pressure control knob for maximum user safety • 4-position handle: horizontal, 45 degrees, vertical, or collapsed • 7-inch minimum height for l ow clearance vehicles • Complies with ASME / PALD test requirements

OTC5292 27.5 Ton Under Axle Jack

• Robust design with completely sealed piston • New lever design and pneumatic release valve allows for more precise release control, does not require separate valve operation step • Four position handle includes ‘stow away’ position • Spring return piston • Includes two height adapters, ANSI/PALD certified


lifting & hydraulics

AXLE / TRUCK HYDRAULIC JACKS Air Hydraulic Truck Jacks OMEHW93735AC 25 Ton Axle Jack with 25 Ton Jack Stands

• Jack has 8” low height allows lifting from axle or suspension • Compact, powerful design of jack quickly lifts rated capacity • Pin style jack stand column adjusts in 1½” height intervals • Heavy duty square tubing • Jack stands sold in pairs

OMEHW93735A 25 Ton Axle Jack with 3” Adapter • 8” Low height allows lifting from axle or suspension • Compact, powerful design quickly lifts rated capacity • Specially coated ram prevents rust and extends jack life • Air assisted ram retract • 3” adapter for added height

• Narrow width fits between tandem wheels • Load-limiting and bypass valves prevent use beyond rated capacity and overextension of ram • Spring activated self retracting ram • Complies with ASME PALD/2009 safety standards • 2 Year Warranty on material and workmanship

KTI63194 - 22 Ton

• 22 ton capacity truck jack with a lift range from 8.9” to 17.5”

KTI63198 - 50 Ton

• 50 ton capacity truck jack with lift range from 11.4” to 21.25”

ESC10448 Yellow Jackit 22 Ton Air Hydraulic Floor Jack

• 22 ton capacity • 8-1/4” minimum height; 20-3/4” maximum lift height • Self retracting shop jack • Chrome-plated pump and piston and ram for added rust resistance • Welded base and cylinder to assure strength and eliminate leaks It has a chrome-plated pump and piston and ram for added rust resistance. It is a shop jack that is self retracting with a welded base and cylinder to assure strength and eliminate leaks.

INT551 50 Ton Air / Hydraulic Axle Jack

• Heat treated cylinder wall and chromed piston give added stability and longer jack life • Alloy steel lifting mechanism for added durability and operator saftey • In line filiter to protect air motor from contaminents • Ram extention kit included with 3/4”, 2-3/8”, and 4” extentions • Large 8-5/8” wheels for easy positioning

ESC10771 Yellow Jackit 50 Ton 3 Stage Air/ Hydraulic Jack • 3 Stage Jack 50T/25T/10T • Power up / power down • Handle length: 57.5” • Easy to roll jack • Air over hydraulic for smooth heavy lifting

Extremely low minimum height 5.5”. Designed for lifting low buses and other low clearance vehicles. Maximum stability.

OME23227 22/35 Ton Air Hydraulic Truck Jack INT565E 22 Ton Air/Hydraulic Axle Jack with 3 Pc. Ext Kit

• Heat treated cylinder wall and chromed piston • Automatic in-line oiler to lubricate air motor The 22 ton air/hydraulic axle jack includes the 3 piece RAM extension kit. This extension kit includes 3/4”, 2-3/4” and 4” extensions.

• Compact, low profile design for maximum access, which fits easily and safely between wheels of tandem axle vehicle • Large steel wheels for easy positioning and smooth motion • Sturdy one piece handle assembly • Handle-top metered control release valve for easy height adjustment, safely away from load

OME23221 22 Ton Air Actuated Hydraulic “Axle” Jack with Extension Screw • Material: Steel • Min. height: 9-7/8” • Max. height: 22-1/2” (with 2-1/2” adapter) • Net weight: 100 lbs

59


lifting & hydraulics

SPECIALTY JACKS ESC92015 5.5/9.9 Ton Hydraulic Jack with Hand Pump • Very flexible thanks to 9 different positions for maximum stroke • 3 year warranty

OTC5214 4-Ton Capacity Fork Lift Jack

• 8,000 lb capacity (4 tons) with a low starting height of 2-5/32” • 10,000 lb capacity (5 tons) when lifting from cylinder saddle– ideal for agriculture and industrial applications • Unique shape of primary saddle allows for handling of all lift truck configurations with flat or edged surfaces.

AIR PUMP OTC1540 4-Ton Capacity Fork Lift Jack

• Low starting height of 2-5/8” • Two-position lift pad permits handling of all lift truck configurations with flat or edged surfaces • Minimum low lift: 2-1/4”. Maximum high lift: 16-1/4” • 30” long handle

OTC4020 Air/ Hydraulic Pump

• 3/8” NPTF oil port • Weight: 15 lbs., 3 oz. • Develops 10,000 PSI at 100 PSI air pressure • 98 cu.in. usable oil capacity in plastic reservoir With shop air as the energy source, these pumps have the power and oil capacity (80 cu. in. usable oil) to drive even the large 55-ton rams. They are ideal all-around power sources for dozens of body, frame, and alignment applications. Also can be used with a variety of rams, presses, and hydraulic pullers operating at up to 10,000 PSI.

AMN13000 100 Ton Aluminum Jack

• Includes “Shut-Off Valve” which allows the pump to be removed while ram is extended • Retracted Height: 11.75” (30 cm). Max. Height: 17.75” (45 cm)

ESC10312 55 Ton Air Hydraulic Aluminum Jack

• Unit has a collapsed height of 10.5”, extended height of 16.5” • Uses any 10,000 PSI pump

ESC10300 100 Ton Aluminum Ram

OTC4140 60-Ton Single Acting Ram

• Ideal for push/pull applications found in off-highway construction mining and other industries where heavy equipment is maintained • Center hole permits extending screws, cables, etc., straight through the ram for versatility of application • 60-Ton capacity 6 inch stroke and a 2-1/8 inch center hole diameter

60

• For use with 10,000 psi pump • Jack 6” stroke • Min Height: 11-3/4” • Max Height: 17-3/4”


lifting & hydraulics

HANDLER CLUTCH / FLYWHEEL OTC5018A Truck Clutch and Flywheel Handler

OTC5015A Truck Clutch/Flywheel Handler

• Replaces 14” and 15-1/2” clutch assemblies • Lifting range of 9” to 37” • Swivel casters provide easy maneuverability • Makes the task an easy, one-person job • Carries a Lifetime Marathon Warranty® • Includes a 2” spline shaft with a1-1/4” pilot to aid in alignment.

• Handles 14” and 15-1/2” clutch assemblies weighing up to 250 lbs • 360º swivel head • Open stance with swivel casters • Eliminates any lifting of the clutch • Enables technician to pivot clutch to any position for removal and installation

OTC515686 Splined Shaft ( 1-3/4” dia.; 1-1/4” pilot)

OTC516159 Splined Shaft (1-3/4” dia.; 1” pilot) OTC516160 Flywheel Handling Attachment

LIFTS

POWER TRAIN

OTC1595 2,500 lb. Capacity Power Train Lift

• Powered by a quiet, 110 volt electric/hydraulic pump • Smooth, sturdy lifting and lowering motion controlled by hand-held remote • Two patent pending independent adjusting screws tilt the table + or - 15 degrees side to side, or fore and aft, and ensure maximum stability of the table in any position • Large casters accommodate heavy loads • A 30 ft. long retractable extension cord reel is mounted to frame

OTC1585A Power Train Lift with Tilting Plate • Compact design and swivel casters for easy maneuverability • Includes the tilting plate • Height range is 29-1/2” to 68-1/2” • Table size: 20-1/2” x 30-1/2” • Supports up to 1,250 lbs.

61


lifting & hydraulics

ENGINE

STANDS

OTC1735B Heavy-Duty Motor-Rotor® Repair Stand, 2000 Lb. Capacity

• Handles a wide variety of engines, transmissions, torque converters, and rear axles from trucks, tractors, and construction machinery • The 50:1 ratio gearbox allows full rotation of mounted unit with just a turn of the crank and locks in position. Easily maneuvered when loaded • Twin-post design, featuring laterally adjustable, 3-position outboard support; provides an extremely stable work-holding unit • 2,000 lb. Capacity Heavy-Duty Motor-Rotor® Repair Stand • Covered by OTC Lifetime Marathon Warranty®

OTC1750A 6,000 lb Capacity Revolver® Diesel Engine Stand with Adapter Assembly

• 96:1 ratio worm and gear set rotates components a full 360 degrees • Crank handle can be locked in any position • Integral 12 ton jack raises the work to provide the swing radius needed clearance • Includes universal engine adapter assembly • Two front wheels and two rear casters provide mobility Universal adapter assembly permits use with a wide variety of mounting plates for Caterpillar, Cummins, Mack, IH, and Detroit in-line or “V” series diesel engines, as well as Allison transmissions.

OMEHW93806 3 Ton Engine Crane

• Installation and removal of engines, radiators, differentials, gas tanks, etc. • Roller bearings in wheels for ease of movement • Swivel hook for full rotation of load • Side swivel of boom for ease of positioning load • Pry bar to remove weight from leg to ease movement of leg extension • 3 boom extension position PREPAID FREIGHT

62


lifting & hydraulics

CRANES

OTC1813 6,000 Lb. Capacity Heavy-Duty Mobile Floor Crane

• Telescoping boom adjusts to three different lengths for three different weight capacities • Boom swivels for vertical and lateral positioning • Equipped with two speed hydraulic pump for rapid, easy lifting • Legs extend to straddle the biggest tires • Usable reach is almost 92”

OTC1814 6,000 Lb. Heavy-Duty Mobile Floor Crane with Electric/Hydraulic Pump

• Telescoping boom adjusts to three different lengths for three different weight capacities • Boom swivels for vertical and lateral positioning • Equipped with electric/hydraulic pump (115V) with remote motor control • Legs extend to straddle the biggest tires • Usable reach is almost 92”

Steering dolly for easy maneuverability also serves as floor lock. Three boom positions give capacities of 4,000, 5,000, and 6,000 lb. to handle the biggest engines, and often the transmission right along with it!

Floor Cranes

• To conserve valuable floor space, crane folds into a compact package for storage • For “close-in” work, leg spread adjusts to clear vehicle’s wheels, telescoping boom extension gives additional reach • Roller bearing mounted wheels and steering dolly provide ease of mobility • A two-speed hydraulic hand pump provides fast boom travel; descent of boom is under precise control of operator

OTC1819 2200 lb. Capacity Heavy Duty Floor Crane • Includes 16-7/8” lifting chain

OTC1820 4400 lb. Capacity Heavy Duty Floor Crane (Freight Delivery) • Includes 18-3/8” lifting chain

63


lifting & hydraulics

SLINGS

& LOAD LEVELRS

OTC205050 Heavy-Duty Adjustable Sling

OTC1822 10,000 Lb. Capacity Load-Rotor® Load Leveler

• 4,000 lb capacity sling with 5/16” chain, 65” long • For lifting and positioning engines, transmissions, etc • Each chain can be adjusted independently for length; plate design enables chain to be “short-hooked” for correct tilt

BRAKE DRUM

BBD350B Back Buddy II

• Makes brake jobs easier and more profitable • Rolls under and bolts onto heavy drum and hub assembly, then handily rolls the assembly out and lays it over for servicing • Angles for perfect hub alignment, eliminating seal damage and costly fixes • A simple change of adapters transforms the tool in seconds from inboard to outboard application • 29” L x 48” W x 43” H; 165 lbs shipping weight

DOLLIES

OTC5017A Brake Drum Dolly

• Remove, install, and transport truck brake drums without physically having to lift them • Works on 15” and 16-1/2” drums found on most Class 7 and 8 tractor and trailer brake systems • Heavy-gauge steel construction, ten-inch pneumatic tires, and adjustable handle • Makes it a 1 person job • Covered by OTC Lifetime • Marathon Warranty®

WHEEL DOLLIES

OTC5090 Back Buddy™ II

• Fast-motion ratcheting jack with 14” of vertical lift • Tilting mechanism to achieve the exact angle necessary for precise reassembly • Fold down handle for open access to the work area • Pneumatic rear tires smoothly roll across any shop floor • Onboard lube tray and toolbox

/ WHEEL LIFTS

ATEATTC-AEZWL Pneumatic Portable Wheel Lift • 180 lb. capacity3” Poly casters • Operates on 120 PSI air pressure • 90 day warranty on material and workmanship

OMEHW93766 3/4 Ton Wheel Dolly

• For handling of dual wheels and large single wheels • Handles up to 52” diameter tires and wheels PREPAID FREIGHT • 2 swivel ball bearing casters for easy positioning • Wide frame and lifting carriage • C  arriage arm rollers with self-lubricating bearings 64


lifting & hydraulics

WHEEL DOLLIES / WHEEL LIFTS

OTC1770A 1500 lb. Capacity Truck Dual Wheel Dolly

• Remove, transport, and replace dual wheel and tire assemblies without strain or struggle • 1,500 lb. capacity and 3-1/2” swivel casters provide easy maneuverability • Hydraulic jack provides 0 to 5” of lift and tilts wheel assembly 4 degrees to prevent damage to wheel seal • Floor space is 45” by 41” • Includes a 6’ support chain to hold load in place

OTC1769A Stinger Truck Dual Wheel Dolly

• This 1,500 lb. capacity dolly will remove, transport, and replace dual wheel and tire assemblies without strain or struggle • S wivel casters, 3-1/2” front and 3” rear, provide easy maneuverability • Floor space is 43” x 42” •N  o. 1769 hydraulic jack provides over 6-1/2” of lift and tilts w  heel assembly 7 degrees to prevent damage to wheel seal • Includes a 6’ support chain to hold load in place

Easy Lever™ Wheel Dollies

• Our Easy Lever wheel dolly gives technicians the leverage they need to easily remove or install truck tire-and-wheel assemblies • Heavy-duty construction capable of toting 300 pounds • Features improved “bent arm” design to improve leverage and minimize back strain • Onboard rollers make stud-to-hole alignment a snap • Spring-loaded kickstand for handy parking • Rugged tubular steel construction

OTC5095A

• With a width of 22”, this dolly handles tire diameters of 24” to 36”.

OTC5096A

• With a width of 26”, this dolly handles tire diameters of 36” to 48”

INT3591 Large Capacity Truck Wheel Dolly

• Allows for a fast and efficient removal of the tire or wheel assembly • Wheel or tire assembly can be rotated left or right to line up stud holes for ease of wheel mounting on vehicle • Backed with the traditional AFF quality and one year warranty • 450lbs capacity and will handle wheels up to and including the new “Super Single” tire / Wheels that are becoming prevalent • 14” rollers, Distance between rollers:20 3/4”

ESC70130 Truck Wheel Dolly

• Works on truck tires 19.5” through 24.5” • Rolls truck wheels easily on 3” casters • Rotate wheel to align bolt holes on studs • 280 lb capacity • Reduces back injuries in shop

ESC70132 Heavy Duty Truck Wheel Dolly

• Heavy duty wheel dolly is designed specifically for super single and flotation tires • 14” wide rollers accommodate even the largest super single and flotation truck wheels • Lifting capacity of 450 lbs. • Reduces back injuries in the shop • Heavy duty tubular construction

ESC90538 Agricultural Wheel Dolly

• Easy mounting, demounting and handling of large wheels on agricultural and earth moving machinery • Double acting hydraulic system • Hands free switch between lifting and lowering action - safe and controlled lowering • Heavy duty construction • Capable of handling large wheels from 45.3” up to 84.7” in diameter and up to 41.3” in depth Top point wheel connection rod keeps the wheel in safe balance. Capacity: 3,306 lbs. Large 6” wheels for easy maneuverability. 65


lifting & hydraulics TRUCK

RAMPS INT3420ASD 20 Ton Wide Stance Truck Ramps

• 20 Ton capacity per pair • Long retractable handle • Wheels ease movement and stores easily out of the way • Comes with rubber non skid pad to prevent slippage • Suitable for large truck tires up to 16” maximum width

OME93200 20 Ton Truck Ramps (Pair) OTC5268 20-ton Truck Ramps (Pair)

• Long, 33” retractable T-handle enhances mobility. • Non-skid rubber matting prevents slippage during use. • Durable, heavy-duty rubber wheels. • Capacity per pair: 20 tons; overall length: 51”; tread width: 10” • Covered by OTC Lifetime Marathon Warranty®.

• Designed specifically for heavy-duty tasks • Large wheel designs for extra durability • Non-skid rubber matting enhances operation safety • Long retractable T-handle for easy positioning • Sold and to be used in pairs

OME93201 20 Ton Wide Truck Ramps (Pair) (Freight Delivery)

• Designed specifically for heavy-duty tasks • Large wheel designs for extra durability • Non-skid rubber matting enhances operation safety • Long retractable T-Handle for easy positioning • Extra wide treads for bigger trucks

SUN1520 20 Ton Truck Ramps

OTC5269 20-ton Wide Truck Ramps

• Application: Wider Front Wheels (cement, dump, garbage trucks) • Long, 33” retractable T-handle enhances mobility. • Non-skid rubber matting prevents slippage during use. • Durable, heavy-duty rubber wheels. • Capacity per pair: 20 tons; overall length: 51”; tread width: 16” • Covered by OTC Lifetime Marathon Warranty®.

• Retractable telescopic T-Handle for easy maneuverability and storage • Accepts up to 16” tire widths • Perforated holes in ramp for tire traction • Rubber surface base prevents slippage when loading/unloading of vehicle • Total weight capacity of 20 tons per pair Whether it’s the non-slip rubber surface base or the perforated holes on the ramps, features are what differentiate this product form other Truck Ramps in the market.

PORTA POWERS

OTC1515B Stinger 10 Ton Collision Repair Set

• Industry standard couplers are interchangeable with leading manufacturer’s units • Snap together design of extension tubes allows for easy assembly • Sturdy extension tubes hold up in even the toughest situations • Automatic overload system on pump protects against damage to equipment • 1/2-ton hydraulic spreader tool has 2” jaws that spread from 5/8” to 3-3/8” 66

BHKB65115 10 Ton Porto-Power Kit

• Automatic pump overload system protects against damage to rams and equipment • Heavy walled extension tubes stand up in tough situations • Flex head features permanently molded rubber pad-interlocked to prevent separation • 1/2 ton capacity hydraulic spreader features 2” jaws and spreads from 5/8” to 3-3/4” • Ram closed height: 13-5/8”; Ram extended height: 19-3/4” The 10 ton capacity model gives you the extra muscle you need to get the job done right. Long handles provide low pumping effort. Also includes custom fitted, rugged blow molded storage case with wheels for easy movement between jobs.


lifting & hydraulics

BOTTLE SUPPLIER

PART NUMBER

OTC

OTC9308

CAPACITY 8Ton

JACKS

MIN. HEIGHT 7-13/16”

MAX. HEIGHT 15-3/4”

AIR ASSIST

INT3512

12 Ton

8-1/2”

17”

N

WLMW1643

12 Ton

6-11/16”

13”

N

OTC

OTC9312

12 Ton

9-3/8”

18-5/8”

OTC

OTC9314

12 Ton

7-1/16”

13-5/8”

OTC

OTC5213

12 Ton

8-7/8”

17-3/4”

OTC

OTC5213T

12 Ton

9-5/8”

22-1/2”

Esco

ESC10446

20 Ton

9-5/8”

18-3/4”

American Forge Performance Tool

WLMW1644

20 Ton

7-1/4”

13-11/16”

OTC

OTC9320

20 Ton

10-5/8”

20-7/16”

OTC

OTC9322

20 Ton

7-3/16”

12-5/16”

OTC

OTC4321C

20 Ton

9-7/16”

17-11/16”

Y

OTC

OTC5221

20 Ton

Astro Pneumatic

AST5302A

20 Ton

10.375”

19.9”

Y

K Tool International

KTI63230

30 Ton

11.2”

18.27”

OTC

OTC9330

30 Ton

11”

17-5/8”

OTC

OTC9350 (Freight Delivery)

50 Ton

11-3/4”

18-15/16”

KTI63250

50 Ton

11.8”

18.8”

Performance Tool

K Tool International

(Freight Delivery)

OME32107

SUPPLIER

N

AST5302A

STANDS

OTC1779B

OTC1780

PART NUMBER

CAPACITY

MIN. HEIGHT

MAX. HEIGHT

STYLE

ESC10498

3 Ton

13.2”

21.5”

Pin Style

OME32107 (Freight Delivery)

10 Ton

28”

47”

Pin Style

Hein Werner

OMEHW93511 (Freight Delivery)

10 Ton

30”

52

Pin Style

Hein Werner

OMEHW93512 (Freight Delivery)

10 Ton

19-1/2”

31-1/2”

Pin Style

Omega

OME32126 (Freight Delivery)

12 Ton

19-3/4”

30-1/4”

Auto Ratchet

OTC

OTC1779B

12 Ton

33-3/4”

44-1/4”

Pin Style

OTC

OTC1783

20 Ton

15-1/4”

24”

Pin Style

AMN14400

22 Ton

9.5”

19.9”

Pin Style

KTI61222 (Freight Delivery)

22 Ton

11.825”

19.75”

Pin Style

OME32225

22 Ton

12-1/2”

19.875”

Pin Style

22 Ton

13.875”

19.875”

Pin Style

OMEHW93526F (Freight Delivery)

25 Ton

12-1/4”

20

Pin Style

OME32107

25 Ton

12-1/4”

20

Pin Style

Omega

AME Intl. K Tool International Omega OTC Hein Werner Omega

OTC1780

(Freight Delivery)

INT3512

KTI63230

JACK

ESCO

ESCO10446

OTC5213T

OMEHW93526F

ESC10498

KTI61222

67


Tire & wheel service

CHANGER

AMMCHD-9551 Coats® Heavy-Duty Tire Changer

• Offers the most automated features and widest range of fittings in the CHD line • Remote-controlled rotating tool head/arm for the fastest, easiest tool changes in the business • Optional wireless remote gives you freedom to move around the machine without cumbersome cables • Handles rims from 14” to 46” (up to 56” with clamp extensions) and tires up to 95” in diameter and 51” wide. • Weight (lbs): 2596.0000 • Operation:  4 Jaw Chuck • Wheel Handled: Budd & Dayton, Tube & Tubeless • Mount / Demount: Hook & Roller on Reversible Mount • Tool  Head Offset: Automatic Permanent Mounted • Table Shape: Moving Table (Side-Mounted) • Wheel Clamping Method: 4 Jaw Chuck • Wheel Lift: Clamp Arm Lifting • Frame Structure: Full Frame • Max Tire Diameter: 95” (2413mm) • Max Tire Width: 51” (1295mm) • Max Wheel Weight (lbs.): 3960 • Min / Max Rim Diameter: 14”-46” (47”-56” with clamping extensions)­

AMMHIT5000 H.D. Tire Changer

• Easy-to-use swing-arm houses all hydraulic controls with a dedicated lever for each powered function • Self-centering hydraulic clamping chuck • Heavy, tapered roller bearings and a dual-direction hydraulic motor provide smooth torque • Wheel Handled: Budd & Dayton, Tube & Tubeless • Mount / Demount: Independent Hook & Roller • Wheel Clamping Method: 3 Jaw Chuck • Wheel Lift: Clamp Arm Lifting • Max Tire Diameter: 76” (1930mm) • Max Tire Width: 25”+ (635mm+) • Min / Max Rim Diameter: 15”-38” • Electric Specifications: 220v / 1ph or 220v / 3ph, 60Hz • Air Required: No

$75 REBATE

with purchase of BOS1694100216810 or BOS169410 Visit boschrebates.com to particip0217810 Offer available April 1, 2016 thro ate/redeem ugh September 30, 2016.

BOS1694100216810 Premium Heavy Duty Hydraulic Tire Changer

• Premium Heavy Duty Hydraulic Tire Changer (220V 3 Phase) • Truck, bus and agricultural high volume tire service • Rim diameter 14”-26”, maximum width 31.4”, maximum diameter 64.5” • Remote control operation • 220  volt 3-phase

BOS1694100217810 TCE 5210, 1PH, HD Truck-Bus-Agr., 230V/3PH/60HZ

• Premium Heavy Duty Hydraulic Tire Changer (1 Phase) • Suit high volume truck, bus, agricultural applications. • 220V 20A 1Phase 68


Tire & wheel service

CHANGER / SPREADER ESC90451 Manual Tire Spreader

• New, adjustable tilting table makes service work faster and easier • Has tool tray to hold patches, etc. • Rotatable design allows for better positioning to work on tire • Arms are adjustable for wide range of tire sizes • Portable style unit

AMN73100 Pneumatic Tire Spreader with Stand

• Air Operated Tire Spreader • For passenger/RV/light truck tires • Wide platform gives stable work surface • Adjustable light • Weight: 131 lbs. (60 kg)

ESC90452 Portable Tire Spreader

• Easy operation with Hand and Extension Lever • Arm extends up to 10” • Portable design can be used with one hand • Air operated • Less Air - Recommend PSI 87-110 pounds

BRALR-EF Tire Spreader with Lift

BRA5120 Truck Tire Changer, 12” - 27” Max Tire Diameter 63”

• Handles rims from 3 3/8” to 27” and tire diameters in excess of 63”Changes tires with a maximum width of up to 30 1/2”5 different rim locking positionsPortable control unit220 Volt motor • Made in the U.S.A. at Branick’s manufacturing facility in Fargo, ND!

• The Model LR-EF is typically used for both passenger and truck tires • This spreader is air-powered and has an easy to use tire lift • It’s affordable and a simple solution for truck tires • It uses a CFL bulb that is RMA compliant, meaning our bulbs emit a minimum of 200 foot candles, which the RMA requires or proper tire repairs •M  ade in the U.S.A. at Branick’s manufacturing facility in Fargo, ND!

69


Tire & wheel service

CHANGER / SPREADER / BALANCER ATEATTC306 Truck Tire Changer, 14” - 46” • Handles rims from 4 1/4” to 56” and tire diameters in excess of 97” • Two-speed hydraulic chuck

• 5 different rim locking positions • Remote controlled tilting/shifting tool arm • Working tool with automatic rotation system This Super Duty Atlas® truck tire changer can easily accommodate tires with a maximum width of up to 53”.

ATEATTC301 Tire Spreader

• Handles rims from 3 3/8” to 27” and tire diameters in excess of 63” • Changes tires with a maximum width of up to 30 1/2”5 different rim locking positions • Portable control unit220 Volt motor

ATEATWBT-210 Heavy Duty Truck Tire Balancer

• Rim sizes: 10”-32”Max. tire diameter:  47”Max. wheel weight: 440 lb.220 V/1-phase •D  isplay in standard or metric units

$75 REBATE with purchase of BOS1694100051810

Visit boschrebates.com to participa te/redeem Offer available April 1, 2016 thro ugh September 30, 2016.

BOS1694100051810 WBE 5210 Heavy Duty Balancer with LED Display 230V/1PH/50-6

• Heavy duty manual digital display wheel balancer for medium and high performance shops • Superior accuracy with laser runout measurement. • Calculates optimal wheel placement on the vehicle for the straightest possible steering wheel • Includes Wheel Lift free of charge. Allows for effortless mounting and demounting of large wheels • Includes standard accessories for car, truck and bus • Rim diameter 6”-40”, rim width 1”-24”, maximum wheel diameter 47.25” 70


Tire & wheel service TIRE

CAGES

BRA2250 Inflation Tire Cage 5 Bar

• Works on commercial truck tires and super singles.
 • Added height of the 2200 series. • Stands 60” tall and comes with five bars.

 • Handle tires with a maximum width of 21.5” (cross section) and maximum diameter of 54”.

BRA2260 Insulated Large Tire Cage 6 Bar

• Insulated Large Tire Cage 6 Bar • Designed with a flat-top design • Engineered to handle extra bars • Stands nearly 62” tall • Handles tires with a maximum width of 29” (cross section) and maximum diameter of 59”

KEN36003 Passenger & Light Truck Tire Inflation Cage

• Works with run-flat, low-profile and other tires that are difficult to seat • Guards against blown lock rings and rims • Made of heavy-gauge steel tubing welded – to steel base

TMRWL98063 Bolt-On Work Lamp for Tire Spreaders

• Bolt-on style lamp • Works with Brannick Tire Spreaders

TIRE BEAD KEN31444 Mega Air Blast™ Bead Seater

• 5 gallon capacity • Handles up to 24.5” wheel size • Certified to ASME regulatory safety requirements • Used on auto, ATV, and truck tires.

TOOLS ATERM-DSR7 7 Gallon Portable Aluminum Bead Seater

• 7 Gallon lightweight aluminum air tank • Pop-off safety valve • Schrader valve allows quick filling of tank through standard air chuck • Shipping weight: 16 lb.

KEN35926 Heavy Duty Impact Bead Breaker

• The wedge foot is forced between the bead and rim flange • Breaker is designed for shop or road use

GAIGB-5ZA 5 Gallon Automatic Bead Booster

TSICH-5 Tire Bead Seating Tool

• 5 gallon capacity ASME certified tank • Pre-set safety release valve (160 psi) • 90 degree on/off ball style discharge valve • Large easy read air gauge

• Automatic valve releases air 20% faster than manual valves, therefore requiring less pressure and making it safer to use • Push-button trigger allows user to keep both hands on the tank, therefore maintaining control during use

GAIGB-5Z 5 Gallon Bead Booster

• Release valve safety lock prevents inadvertent discharge • Powder-coated inside and out to protect from rust and deterioration caused by moisture 71


Tire & wheel service

TIRE BEAD

TOOLS

ESC10100 ESCO Giant Tire/Earthmover Bead Breaker

• For use on 5 piece rims, 25” to 51” with pry bar/bead loosening pockets • 13.8 ton ram will break the toughest beads • Will use with any 10,000 PSI Hydraulic Pump • Known as the 1825D or “three fingered willy” • 4-1/4” stroke

ESC10821 Yellow Jackit Economy Bead Breaker Kit

• Works on single, two, and three piece wheel truck tires and rims • Works on some the newly styled wheels • Most popular tool for breaking beads on agricultural wheels • Can be used with any 10,000 psi air hydraulic pump • 3.75 inch stroke

ESC10209 Giant Tire Bead Breaker Kit

• Use on 5-piece rims 25” to 51” with pry bar/ bead loosening pockets. • Use with any 10,000 p.s.i pump • 4-1/4” stroke • 13.8 ton ram Includes: ESC10100: Bead Breaker ESC10592: Pump, Air Hydraulic, 5 quart ESC10604: Hose Assembly with Hose Coupler, 8’

ESC10221 Bead Breaker Kit Maxi

• Redesigned bead breaker, works on all 3 piece wheels that replace older 5 piece wheels. • Designed to work on front or back of wheel with no attachments or accessories. • Clamps easily to wheel - no setup time. Includes: ESC10102: bead breaker ESC10500: Turbo II Pump, Air Hydraulic, 3 1/2 quart ESC10604: Hose Assembly with Hose Coupler, 8’

ESCO Giant Tire/Earthmover Bead Breaker is used for breaking the beads on Giant Tire/Earthmover Tires/Rims.

ESC10107 European Style Bead Breaker

• Lightweight aluminum bead breaker • Hook clamp designed for 3 piece wheels • Specialty designed foot for pushing against bead • T- Handles for easy use • 13.8 tons of breaking force

ESC10101 Bead Breaker Head “Combi”

• Works on any 1, 2 and most 3 piece Rims including some new style wheels • Breaks beads in seconds using 10,000 lbs of force •N  ot for use in 5 piece rims. Use Model 10100 or 10105 • Uses any 10,000 PSI Hydraulic Pump • Can be used on vehicle with wheel still on Known also as an “Ag” bead breaker.

ESC70150 Slide Hammer

• Breaks stubborn truck tire beads with ease • Spring action design • Prevents kick back • Wedge foot is forced between the bead and the rim flange delivering a blow directly to the tip • Heavy duty tool

ESC10200 Bead Breaker Kit

• Works on one, two three piece rims • Consists of 10101 Bead Breaker Head, 10500 3-1/2 Qt.Hydraulic Pump, and 10604 Hose assembly • Works with regular compressor at 90-120 psi. • Uses 10,000 PSI hydraulic fluid force • Uses Hi Flow Couplers Will break beads in seconds using 10,000 lbs of force. Unit will not work on 5 piece rims.

ESC70160 Manual Bead Breaker

• Manual bead breaker loosens tire bead from rim • Works on tire without removing the wheel from the tractor • Will also handle 38” and 42” 14 ply farm tractor and backhoe tires • Use also on small ATV and lawnmower tires • Do NOT use with Air Impact Wrench 72


Tire & wheel service

TIRE BEAD

TOOLS

OTC5728 Tire Bead Breaker

• Excellent for damaged tires or tires with weak sidewalls where conventional bead breakers will not work • 9.5” handle keeps the head in position while keeping the hand away from the sticking surface

OTC5731 Tire Bead Locking Pliers

• Tire Bead Locking Pliers prevents the tire from slipping while mounting the top bead • Prevents tire from contacting costly TPM Sensors • Quick and easy universal clamping design • Reduces service time of mounting and demounting tires • Rugged rubber coated jaw to protect wheel finish

OTC5732 Tire Spoon Holding Pliers

OTC5713 Tire Bead Seater

• Equipped with unique configurations that enhance ease of use, productivity and safety for technicians • ASME certified 13-gallon tank is designed with a nozzle and valve connected via hose assembly, giving the user more control

OTC5700A Tire Bead Seater Accessory

• Tire Spoon Holding Pliers is the 3rd hand needed to ease mounting and demounting of tires using multiple tire spoons • Quick and easy universal clamping design • These simple locking pliers clamp to the wheel rim while mounting or demounting a tire on a tire changer or on the floor • Reduces service time of mounting and demounting tires • Rugged rubber coated jaw to protect wheel finish

OTC5733 Tire Bead Wedge Pliers

• Keeps the tire in the wheel drop center • Ease mounting and demounting of larger truck and agricultural tires • Quick and easy universal clamping design • Rugged rubber coated jaw to protect wheel finish • These simple locking pliers clamp to the wheel rim while mounting or demounting a tire on a tire changer or on the floor

• Long 6-1/2’ hose will reach all positions on the tire • Provides the ability to control the blast with both hands firmly on the nozzle assembly • Includes all the fittings to adapt the hose to most surge tanks found on tire changers • Lifetime warranty

OTC5702 Tire Bead Seater 2 Gal

• Provides many of the great features of its OTC5713 big brother, at a more economical price! • The trigger-style discharge valve allows for optimum airflow control while allowing both hands to firmly hold the tank/valve assembly, critical for effective and safe use. • Unique nozzle design significantly reduces “blowback recoil” and contains discharge holes strategically placed for optimum inflation of a wide range of tire sizes and wheel diameters. • Inline design allows for a comfortable distance from the tire and wheel while seating. • ASME approved 2-gallon tank with inlet valve, pressure gauge, and relief pressure valve for safety.

AMN12041 Titan Bead Breaker Hydraulic Pump Combo

• Compact design makes unit affordable option • Ideal for tire dealer who requires occasional use of bead breaker • 10 ton cylinder has enough force to break most beads, unit will break all single and 2 piece and most 3 piece wheels • Builds 10,000 PSI (700 BAR) Hydraulic Pressure • Operates with as little as 80 PSI (5.5 BAR) compressed air 73


Tire & wheel service

MOUNTING / DEMOUNTING TOOLS

OTC5724 Extending Tire Spoon

• Unique “Convex Slip Head” curved design allows the spoon to slide easily into the tire bead while the spoon bump limits the depth for quick-and-easy operation • 22” extends to 34”, 3/4” diameter • Twist-lock feature allows the spoon to be extended and locked into position with a twist of the collar • Limited Lifetime Warranty

Tire Spoons

• Unique “Convex Slip Head” curved design allows the spoon to slide easily into the tire bead while the spoon bump limits the depth for quick-and-easy operation • Handle knob enables easier spoon pick up • 3/4” diameter

OTC5735-35 35” Double End Curved and Flat Tip Curved Tire Spoon

OTC5736-24 24” Curved Tire Spoon OTC5736-30 30” Curved Tire Spoon

OTC5737-30 30” Flat Tip Curved Tire Spoon

OTC5739-24 24” Curved Shank Tire Spoon OTC5739-30 30” Curved Shank Tire Spoon

KEN35359 Heavy Duty Universal Wheel Weight Hammer

• 34% larger strike area than typical wheel weight hammers • 28 oz. cast steel head with anti-marring replaceable hammer faceReplaceable chromoly steel hook removes all clip-on wheel weights • Fiberglass handle with ergonomic industrial grip is chemical resistant and 4 times stronger than wood

KEN35323 T35 Heavy Duty Tire Hammer

• Used for mounting and demounting tires • Makes tire changing faster and easier for passenger car, truck, bus, farm tractor, and aircraft tires • Non-marring rubber end can be used for driving on lock rings • Wood handle • 16-1/2” length

KEN35453 4 Piece Serpent™ Tire Changing Set

• KEN35449 Demount Tool: demounts both beads, no more lifting the tire/wheel assembly off the ground • KEN35450 Mount Bar: wing shape is designed to stop against the rim, won’t slip into wheel well; small end of tool easily gets under the stretched bead for that last pull • KEN31710 Bead Holding Device: Holds the bead in place against the wheel while mounting a tire • KEN31810 Wheel Protector: Protects wheel rims from damage

TSITNT-100 Mount/Demount Tool

• Only one tool needed to demount tires and one tool needed to mount tires • Tools will not damage tire beads saving valuable casings for retreading • TNT-100-1 demount tool eliminates the need to lift the tire and rim to remove bottom tire bead • Some tubeless tires can be demounted and mounted without removing the wheel from the vehicle • Quickly demount tires 17.5” to 24.5” • Can be used on tubeless truck tires including Super Singles size 315 • TNT demount tools are ideal for Dayton type (center less) and Budd type disc wheels • 55” L x 11’ W x 11’ H; 33 lbs shipping weight

TSITNT100-1 Demount Tool

GAIG12300 Demount Tool, Super Single Use

GAIG12100 Demount Tool for 17.5” - 24.5”

• Demounts tire sizes 17.5”-24.5” • Only a single tool needed to demount tires. • Eliminates the need to lift the tire and wheel making a hard job easy and protecting against insurance claims. • Unique design protects valuable tire casings for retreading • Handle design protects against damage to the tool and other objects that may come in contact. 74

• Tool is designed to work on wide base super single tires • The first bead is dismounted by inserting the rollers and pulling the bar over • Take the bar back over to its original position so the rollers fall below the second bead. It may be necessary to use a block of wood to help prop up the second bead on super single tires • Pull the bar over again to fully dismount the second bead


Tire & wheel service

MOUNTING / DEMOUNTING KEN34647 41” Heavy Duty Truck Tubeless Tire Iron

• Patented one-piece design and heat treating assure durability • Rounded tip ends insert easily and will not cut or rip bead or sidewall • Stock: 7/8”

KEN34747 36” Straight Tubeless Mount/Demount Tool

• Length: 36” • Stock: 3/4” • Weight: 4-1/2 lbs Use on standard and large truck tires, including industrial, farm, buses and tractors.

KEN34847 52” Straight Mount / Demount Tire Iron

KEN34645 37” Truck Mount/Demount Tire Iron

• Standard tubeless - for use on truck, agricultural and industrial tires • Patented one-piece design & heat treated to assure durability

• Patented design offers one piece construction, and assures long life for many tire changing applications • Rounded tip ends insert easily and will not cut or rip bead or sidewall • The new design makes it easier to mount and demount tires without changing the way the tool is used

KEN34649 52” T45AS Super Duty Tubeless Truck Tire Iron

• Precision forged ends, heat-treated throughout for a tough, slip-free grip on the rim and bead •M  ount end has unique, trademarked curved design to always grab the bead • 7/8” shaft for strength and durability

KEN34648 37” Heavy Duty Lock Ring Tool

• Removes continuous side rings on two piece truck rims • Use for multi-piece wheels, especially hub type

KEN34644 37” Mount / Dismount Tire Tool

• 3/4” diameter bar special tip on one end for grabbing the rim • Design allows for less effort, provides excellent wheel/rim surface contact area for less side to side movement Ken-Tool 1/2 pg ad• 3-22-16.qxp_Layout 1 3/22/16 Tip on one end for ‘grabbing’ the rim 3:41 PM Page 1

NEW

AIR BRAKE SLACK ADJUSTERS KEN33205

2.5 tons of force!

Slack Adjusters for Haldex ®, Bendix ®, KEN33206 ® KEN33200 and Meritor Air Brake Systems

TM Demount Tool

DUAL WHEEL SEPARATION BAG The first wheel separation solution for steel, aluminum and chrome wheels! No metal on metal contact!

KEN33206

33205 Haldex ® Slack Adjuster Tool

Shark FinTM inflates to separate stuck or frozen wheels without damaging the wheel!

• 7/16" ratchet size • Extra long 14.5" handle adds leverage – makes overcoming the anti-reverse mechanism easier than ever

• 5000 lbs of static pressing force! • Works on 15" to 24.5" dual and single wheels and tires on trucks & trailers • Kevlar inner inflation bag is industrial grade and nearly puncture proof • 90 psi max pushing WATCH THE pressure – 150 psi SHARK FINTM maximum rated VIDEO pressure

Avoid costly fines and downtime – make sure your brakes are always operating at KEN33205 their best!

KEN33200

33206 Bendix ® Slack Adjuster Tool • 9/16" ratchet size • Deeper Hex allows reach to recessed slack adjusters KEN34555

33200 Automatic Slack Adjuster Set (Meritor ®) • 5/16" ratchet size with double square offset reversible wrench • Fork End tool holds release of anti-reverse pin during adjustment • No more prying and risking damaging the anti-reverse mechanism

Watch our videos at www.youtube.com/KenToolVideoMedia & www.kentool.com

Ken-Tool • Akron, OH • Toll Free: 855-821-7309 • E-mail: sales@kentool.com

75


Tire & wheel service

MOUNTING / DEMOUNTING TOOLS

Blue Cobra™ Truck Tire Demount Tool

• Quickly demount nearly any 20”, 22.5” and 24.5” tube-type and tubeless truck tire, up to a 13” wide wheel • Ergonomic shaped steel handle with no-slip grip for optimum leverage while reducing back injuries • Allows tire demounting without lifting the wheel assembly • Made of durable high-quality steel • Comes with 31810 Leather Rim Protector

KEN32114 2 Piece Small Tire Iron Set

• T5 (KEN32115) - Ideal for demounting small tires • T8 (KEN32118) - Ideal for mounting small tires • Sturdy, comfortable plastic handles • Rounded ends will not pinch tube • Length: 16”; Stock: 7/16”; Weight .8 lbs

ESC70100 Easy Way Truck Tire Demount Tool

• Demount tubeless truck tires in seconds • No damage to aluminum or painted wheels • Never lift tire to demount rear or bottom bead • Lifetime warranty • Never lift tire to demount rear or bottom bead Tubeless Truck Tire Demounting System. Demounts 16.5” to 24.5” Diameter Truck Tires in seconds. No damage to aluminum or painted wheels using the included rim protector 70103. Consists of the 70101 top bead demount tool, 70102 bottom bead demount tool and 70103 Rim Protector.

KEN35444 Deluxe Blue Cobra™ Truck Tire Service Set

• 10 Piece Set •C  ontains all of the tools you need to change most 22.5”and 24.5” tubeless truck tires quickly and easily • Ships in one carton Set Contains 1 - Blue Cobra™ Truck Tire Demount Tool 1 - Leather Rim Protector 1 - T11ES Bead Breaking Wedge 1 - T45A 37” Tubeless Tire Iron With Safety Handle 1 - 30” Double-End Tire Spoon 1 - T35 H.D. Tire Hammer 1 - 8# Bucket Euro Paste Lube 1 - Euro-Style Lube Applicator Brush 2 - Aluminum C-Lok™ Bead Holder

ESC90518-200M Mounting Tool

• Fits all rims for easy mounting • Works on all truck tires including Super Singles • Rubber coated handle for non-slip grip • Does not damage the wheel • Mount tire in less than 30 seconds

ESC90518-100-1 Tire Demount Tool

• Demounts tire sizes 17.5 up to 24.5 • Only lift tire once • Does not damage beads • Demounts tire in less than 30 seconds • Rubber coated handle for support

ESC60305 EZ Buster Torque Multiplier

PBT70867 3/4” Power Bar

• Heavy duty 3/4” square drive • Length: 580mm • Ideal for crankshaft bolt removal on troublesome DuraMax applications • Bidirectional for loosening or tensioning fasteners • Provides high impact force for breaking loose fasteners used in many industrial applications • Ideal for use in onsite heavy equipment service and repair • No compressed air required 76

• Safely removes corroded, rusted, overtightened, and lugs • Lightweight, weighs less than 20 lbs • Comes with 32 and 33mm nuts • EZ winder action allows for fast removal of stubborn nuts • Effortless design


Tire & wheel service TORQUE

OTC5745 Hands Free Air Chuck

• Perfect for applications where the tire valve is facing the floor while seating the tire bead, such as most dual wheel configurations • Hooks on the top bead seat of the wheel and the spring pressure holds the chuck on the tire valve pointing to the opposite side • Ball valve included to allow inflation only when needed • Limited Lifetime Warranty

BRA7600 Branick 7600 Strut Spring Compressor

• Doesn’t require adaptors • Heavy duty Acme thread • Multi-position hooks • Versatile mounting options • Easy to use

The multi-position upper spring hooks are adjustable up to 4 inches, in 1 inch increments, giving the Model 7600 the flexibility to fit difficult coil spring configurations while its long handles provide extra torque to make compression easier.

OTC7077 Axle Stud Cone Pliers

• Now you can easily remove the tapered cone from studs used on medium- and heavy- duty truck rear axles • This specially designed pliers gives you the leverage needed to expand the cone and remove it from the stud for axis removal

OTC6591 StrutTamer™ Extreme

• New frame includes cross bracing at arm mount locations - standard, this eliminates frame flex when compressing heavier springs • 2:1 reduction gearbox - standard, allows for a 2:1 torque compression increase when compressing struts • Lock rings to hold arms in position standard, this eliminates arms from spreading or sliding when compressing offset or unique strut configurations • Four-point locking jaws securely hold the spring in place

SOCKETS ACC20-4100 3/4” Drive Heavy Duty Torque Set

OTC6592 StrutTamer™ Extreme with Stand

OTC5085 Hub Oil Seal Puller

• Eliminates bearing and hub damage that can occur when a punch and hammer is used to remove the seal • Extra long 28” handle provides leverage, unique pulling head design quickly and easily removes the seal in one piece • Built from the highest quality heat treated steel • Removes hub seals on trailer and truck axles, including truck steering axles

• Patented strobe marks stop turning at precisely the correct torque on each and every job • Engineered for rugged professional environments, each torque stick is manufactured with heat treated Swedish spring steel and boasts a solid one piece design • Packaged in a convenient molded plastic carrying case • Includes color coded application chart • ISO 9001 certified Four-piece torque stick set includes: red; brown; black; yellow. Lifetime guarantee

ACC20-4000 4 Piece 1” Drive Heavy Duty Torque Socket Set

• Original HD-AT4 • 4-piece heavy-duty truck set: HD red, HD yellow, HD brown and HD black • Heavy-duty bracket included • The BEST raw materials, specially heattreated, make AccuTorq® the most accurate torque socket in the world

OTC7180 Universal Bearing Cup Installer

• Works on axles from 11,000 to 50,000 lb. capacity • Adjust to fit 3-5/8” to 6-1/2” O.D. bearing cups, which adds up to as many as 30 individual drivers

DIAL GAUGES PMS 300 BLUE

SGT65110 Tire Inflator with Dial Gauge

• EZ to read dual calibrated scales 0 - 120 PSI & 0 - 830 kPa • 6” dual head chuck • Protective rubber boot surrounds the gauge • 6” dual head chuck, 13” long hose with 360 degree swivel & 1/4” Female NPT inlet • Corrosion resistant brass pressure relief valve

SGT65130 Truck Tire Inflator with Dial Gauge

• Extra long reach 14” dual head chuck with internal lock on threads inflates in both straight and offset positions • Easy to read, dual calibrated scales (0-160 PSI and 0-1100 kPa) • Ideal for use with heavy duty trucks, buses, RV’s and motor homes 77


Tire & wheel service

AMN67300 Nut Buddy

IPA9062 Four-Tire Inflation Equalizer System

Comes with black Nut Buddy carrying case.

• Fast and accurate four-tire inflation, deflation, and equalization system • High flow, adjustable regulator system for drive axles • Highly accurate, glycerin-filled gauges •C  olor coded hoses with corresponding panel indicators • Optional lock on chucks

AMN71630 Complete Heavy Duty Wheel Puller Kit - Single Hook

Engineered for maximum air volume and the highest possible accuracy, the Four-Tire Inflation Equalizer System ensures repeatable and consistent tire inflation for every shop bay.

• Busts loose the most stubborn wheel nuts • Use on commercial or agricultural wheels • Gear ratio: 58:1 • Rated output torque: 2950 ft lbs • Two sockets included: 1-1/2” (38mm) and 1-5/16 (33mm)

• Eliminates need to crawl under vehicle • No need to use sledge hammer to seperate stuck wheels • Saves time and improves safety • High Chromium Steel Construction • Includes (2) pulling ends to ensure versatility on wheel types

AMN15300 Molded Rubber Wheel Chock

• Durable rubber construction • Features an eye bolt for chain or rope attachment • Ribbed pyramid design • Either side of wheel chock can be positioned against the tire • Sold individually. Weight - 10 lbs (4.5kg)

AMN51480 Snap On Style Wheel Weight Hammer

• Makes removing wheels weights effortless • Soft rubber head protects high-end wheels • Rubber grips offer comfort during repeated use • Strong steel construction • Limited warranty

AMN26140 AME Liquid Tire Balance, Twelve Bottles per Case

IPA9060 Mobile Tire Pressure Equalizer

• Inflate/deflate/equalize up to five tires at once • High flow dual regulator system for front and rear tires • Glycerin-filled high accuracy pressure gauges • Color coded hoses with corresponding panel indicators • Built on rugged mobile cart with pneumatic tires The IPA® Mobile Tire Pressure Equalizer introduces a new, fast and efficient method to accurately read and inflate tire pressure on multiple tires (up to five) at the same time. When added to your PM and Safety lane procedures, the IPA® Mobile Tire Pressure Equalizer provides a solution to maximize fuel mileage, extend tread life and reduce the risk of blowouts.

IPA9067 IPA® Tire Comparator™ (Type II)

• Extend tread life, reduce blow outs and tire decapitation • Most consistent caliper for comparing tread wear on dual mated tires • Fast, simple to use, no measuring and no guessing • Special tread wear adapter gauges available for any rim size

• Balance tires for the life of the tire • Cools tires & wheels • Detects leaks and cracks in the rim • Lubricates and conditions • EPA Approved Green Product

­ESC50147 Truck Wheel Weight Hammer

• Soft head • Hammer is ideal for hammering coated weights • Claw hook is replaceable • Solid wood shaft

ESC60301 Budd Nut Wrench (Pork Chop), 1-1/2” and 38mm

• Pork Chop style-New design; cannot slip out of the rim hole • Won’t damage aluminum wheels • Holds outer cap nut securely • Replaceable polymer covered tail

KEN32319 TR5A 30” Long Truck Wrench Handle

• Eight inches longer than standard TR5 (32318) Truck Wrench Handle • Longer length provides greater leverage

KEN35595 TC95 Heavy Duty Truck Lug Wrench • Combination wrench fits SAE and metric • 1-1/2”, 13/16” square, 30mm and 33mm • Use on heavy duty trucks, buses, and tractors • Center hole for a leverage bar

ESC40125 Skirt Nut

• Stops wheel/hub vibrations • No more loose wheels • Prevents wheel ‘clocking’ on hub piloted wheels • Meets and exceeds standards of SAEJ1965 for torque tension • Eliminates wasted fuel caused by rolling resistance ‘drag” Replaces all style of M22 Flange Nuts on hub piloted wheels. 78

MLK433918 Aluminum-Wheel Hub Grinder for Trucks • Special grinder used to clean the wheel rim contact surface, designed for vehicles with stud bolts • Stud Grinder for Trucks • 8 -point • Comes with 1-basic unit and 10 discs


Tire & wheel service

MLK609400-460 35 Piece Universal Press and Pull Sleeve Kit with XL C-Clamp with Vibro Impact Spindle

• The #1 Press & Pull Sleeve Kit on the market!! • Sleeves inner diameter from 34 - 72 mm • Universal tool for extracting and mounting the following: silent bearings, hydraulic bearings, ball bearings, rubber bearings, shift seals, bearing bushes, etc • Complementary universal base frame (for direct use on car) and other sizes sleeves and spindles available separately • Can also be used with 12 ton hydraulic spindle and baseframe (mueller 609 312, not included in offer) or Impact wrench for greater application of force • Includes Vibro impact spindle TR20K with ball bearing. To be used with Mueller Press and Pull Kit 609 400

OTC5080 Truck Front Leaf Spring and Bushing Service Set

• Delivers 10 tons of hydraulic force to remove and install truck front spring eye bushing assemblies quickly and easily • Services bushing with diameters from 1-1/4” through 1-1/8”; handles all popular OE and aftermarket components • All accessories are included except the hydraulic hand pump, which must be purchased separately

OTC4295 Wheel Stud Service Kit

• Remove and install 10 studs in only 10-15 minutes (compare to 20-30 minutes for more expensive competitive products) • Can be powered with an impact wrench • No need to remove hub from vehicle Includes: large C-frame with forcing screw, one set of installation adapters, two separate adapters for removal, extension adapter for increasing the range of travel, blow-molded storage case, and power thread lubrication.

KEN7326 New Super HubShark System

• Updated HubShark has greater capacity to handle larger bearings • Kit now includes a 3/4” Center Screw to accommodate smaller import axles • Now includes a thrust bearing to reduce friction between the main screw and the body, allowing smoother bearing removal and installation • Per your request, HubShark has been updated to meet your most challenging bearing requirements

KEN34549 Dual Wheel Separator

• Innovative “One-piece” Pusher won’t fall apart during use • Pusher is ball bearing-driven for near-zero turning resistance • Pusher is heat treated for long-lasting strength and durability • Forcing Screw and Pullers have powerful 1-1/8” diameter x 11 threads for years of reliable service • Includes two pullers to cover large and small dual wheel applications • Components have black oxide or bright nickel plating finish for rust and corrosion resistance

OTC4505 19 Piece Bushing Driver Set • Includes: Large, medium, and small driver handles with nuts and sixteen bushing adapters ranging from 3/8” to 1-3/8”

OTC4507 10 Piece Bearing Race and Seal Set

• Permits installation of tapered bearing races and seals without damage to the component or housing • Includes: Driver handle with bolt, plus these tool sizes: 1.565”, 1.750”, 1.965”, 2.325”, 2.470”, 2.555”, 2.830”, 2.995”, and 3.180”

KEN29980 reCore™ TPMS Sensor Saver System Starter Kit

• SIMPLE. Everything you need to repair the corroded valve core with a new, corrosionproof valve core • FAST: With a little skill, tech can install a new valve stem in 10-15 minutes • Repair TPMS sensors without even taking the tires off the vehicle • Packaged in blow molded storage case

OTC4526 Heavy-Duty Single Pressure Beam Bearing Splitter Set

• Single point of adjustment allows quick attachment of splitter to the application • Push Puller is thread matched to the splitter • Interchangeable legs shorten or lengthen the range of pull • For use on most bushing or bearing jobs up to 4” in diameter 79


pullers EZREZLINE Wheel Laser Alignment Tool

ALIGNMENT

TOOLS

• All measurements can be taken in under 10 minutes • E-Z precise axle and wheel alignment • For heavy trucks, all types of trailers • Compact design, easy transport and toolbox storage • Multipurpose measurement capabilities Introducing the most accurate, affordable, compact, portable laser alignment tool! The “EZ Line” has many other uses in the Automotive and Commercial Vehicle Industry. The EZ Line makes obtaining alignment readings on most trailer types very simple and fast, from RVs to commercial trailers. A straight steel bar and bungee cord are all you need in addition to the EZ line, to set the toe on any vehicle, including trucks, that have an “in” or “Out” toe setting. Includes: 4 magnetic self-centering lasers, measuring tape, 2 magnetic 5th wheel pin adapters and a durable storage/travel case.

SUN3909­ 10 Ton Hydraulic Gear Puller

• CR-MO alloy steel jaws for greater strength and performance • Provides up to 10 tons of pulling force with hydraulic ram • Makes 8 different pulling combinations for total versatility • Packaged in a blow molded case for ease of transportation

EZREZLINEB1SW Complete Alignment Tool Package With Software

• Includes everything shown above, plus software, hub and bar adapters

­­­­­Mechanical Grip-O-Matic® Pullers OTC4518 5 Ton Bar Style Puller Set

• Our two most popular bearing “splitters” (2” and 3”) • Four sets of hex push-puller legs • A bar-type puller head with a 9/16” forcing screw • Weight 10 lbs 8 oz Separator tools are used with bar puller and legs for a wide variety of pulling jobs.The 5” puller cross-bar with a 6-1/4” forcing screw or each of the bearing separators may also be used separately or in combination with other pullers or tools. All included in a blow-molded plastic storage case which keeps the set contents organized and protected from loss.

OTC4534 Multipurpose Bearing and Pulley Puller Set • 2 – Forcing Screws (Live Center): 3/4”-16 x 6-11/16” and 3/4”-16 x 5” • 2 – Cross-bar Yokes: 3 pin-hole at 3-1/4” to 5-1/2”, 2 pin-hole at 2-3/8” to 3-3/8” 2 – Clamp Bolts • 3 – Pairs of Puller Jaws: 1-3/8” Max, 1-5/8” Max, 1-3/4” Max • 1 – Pair of Jaw Pins with Ball Spring • 3 – Pairs of Capped Bolts • Spread: 3” to 5”, Reach: 1” to 2-1/4” • Housed in a blow-molded plastic storage case

Forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity

OTC1026 - 5-Ton, 2/3-Jaw OTC1027 - 5-Ton, Long 2/3-Jaw OTC1035 - 7-Ton, 2-Jaw OTC6574 Universal Hub Puller HD with Plate

• The ‘Final Answer” to frozen hubs, axle shafts, and other tough pulling applications • Adjustable sliding legs can be positioned anywhere • Wide range of 4” to 8”+ bolt circle • Forged puller assembly with 1” drive screw capable of 20 tons of force • Drive screw approved for use with an impact gun and can be struck with a hammer

OTCPA7 7 Ton Capacity Four-In-One™ Puller Set

• With the parts included in the PA7, you can quickly assemble a 2/3 jaw puller with standard or long reach • 7 ton capacity, the maximum reach of 8-3/4”, and maximum spread of 11” make it ideal for hundreds of pulling jobs

5 Ton Capacity 2/3 Jaw Reversible Pullers

• Can be assembled to make a two or three jaw puller when additional stability is needed • Reversible jaw design for added versatility and a broader range of pulling capability

5 Ton Reversible Pullers

• Reversible jaws feature a wide face on one end and a narrow face on the other - its like two tools in one • Grip tightens as pressure is applied • Manufactured with heat-treated drop-forged, alloy steel • Reach: 3-1/4” KTI70303 - 4” Two Jaw KTI70304 - 4” Two/Three Jaw KTI70305 - 6” Two Jaw KTI70306 - 6” Two/Three Jaw 80

SUN3907 - 4 Way • Maximum reach: 3.25” • Maximum spread: 4.75” SUN3908 - 8 Way • Maximum reach: 5.5” • Maximum spread: 7”


pullers

OTC5054 Air Brake Service Kit

• Works on manual or automatic slack adjusters • This kit has the tools needed to remove slack adjusters and push-rod clevis pins used in the S-cam brake systems of class 7 and 8 vehicles Kit includes: OTC5055 and OTC5056 slack adjuster pullers, OTC5057 brake clevis pin press, and a plastic storage case.

OTC314548 Replacement Hook Kit OTC5038 Brake Anchor Pin and Bushing Service Set

• No need to remove the bearing hub assembly to replace pins and bushings on 16-1/2” S-cam trailer and tractor “Q” brake systems • Special tooling and C-frame press get you past the hub assembly. Quick and professional without damaging other parts • Includes everything for removal and replacement

OTC5052 Brake Slack Checker

• This tool enables you to quickly check the brake adjustment on class 7 and 8 trucks and trailers having S-cam brakes • Features a sturdy four position handle to provide the leverage you need at the proper angle • Works on manual or automatic slack adjusters

OTC7071 Differential Housing Spreader

• Works on Dana axle models 30 through 70 • Weight: 34 lbs. Removing and installing differential ring gear assemblies is typically a difficult, time-consuming chore, unless you’re using the differential housing spreader. This device uses mechanical screw power to spread the housing, allowing easy removal of the differential assembly while eliminating damage often caused by makeshift methods.

OTC5190A Heavy Duty Universal Joint Puller

• Designed to fit all Class 7 and 8 trucks including a wide variety of drive-lines from Spicer and Meritor • Improved material and heat treat on major components • Larger diameter threaded shaft • Improved strength and durability • Compatible with: Spicer 1610, 1710, 1760, 1810, 1880, SPL 140, 170, 250. Meritor 16, 17, 18N, 1710, RPL20, 25

OTC5191 Heavy Duty Bearing Cup Installer

• Three individual adapters press bearings to the manufacturer’s recommended depths • Adapters fit Spicer SPL 140, 170, and 250 series drivelines • Pre-determined “installed heights” specified by the manufacturer are engineered into the components to ensure correct installation every time. • F or use on quick-disconnect universal joints only Installs bearing cups quickly and accurately into the Dana/Spicer SPL “Life Series” quick-disconnect universal joints, one at a time.

OTC5081 Air Brake Spring Tool

• Replacing brake shoes on heavy-duty tractors and trailers is now a snap thanks to OTC’s new No. 5081. This little tool eliminates unsafe methods, grip wrenches, pry bars, or screwdrivers to unhook and reconnect the two “Q” brake shoe retaining springs. • The unique design of the No. 5081 lets you use it as a lever against the axle to separate the spring loop from the brake shoe. Not only does it make the job easier than ever before, it takes very little effort! • Wt., 1 lb., 4 oz.

OTC5192 Heavy Duty Bearing Cup Installer

OTC5055 Slack Adjuster Puller

OTC7490 1/2” Drive U-Joint Remover Tool

• Puller fits many manual types

OTC5056 Slack Adjuster Puller

• Fits Driveline Series 1610 to 1880

• For use with 1/2” drive impact wrench • Easily removes stubborn heavy duty U-joints on Dana and Rockwell® driveshaft assemblies

• Works on Rockwell, Haldex, Gunite, and Bendix automatic adjusters

OTC7069A Heavy Duty Brake Spring Pliers

• Save time and effort when removing and installing return springs on the brake shoes of heavy duty vehicles • Specially designed pliers works for hydraulic wedge-type and “S” cam air brakes • Its 26-1/4” length gives the leverage easily, and the huge jaw opening accommodates even the widest brake shoes • Comes with replaceable tips 81


shop equipment DRILL

PRESSES JET354402 JET J-2550 20” Floor Model Drill Press

• Cast Iron head • Large quill • Head casting features a permanently lubricated ball bearing spindle assembly, using four heavy duty ball bearings in an enclosed quill for longer life • Massive T-slotted production work table (Model J-2550 only) • Table tilts 45 degrees

JET354401 JET J-2530 15” Bench Model Drill Press, 3/4HP, 115V

• Cast iron head • Large quill allows greater accuracy • Head casting features a permanently lubricated ball bearing spindle assembly, using four heavy duty ball bearings in an enclosed quill for longer life • Table tilts 45° • Large ground steel column diameter for maximum head and table support

The J-2550 20” Floor Drill Press boasts a 1HP motor and tilting table. Simple yet powerful, the J-2550 has a cast iron head and large quill allowing for greater accuracy.

The J-2530 15” Bench Drill Press boasts a 3/4HP motor and tilting table. Simple yet powerful, the J-2530 has a cast iron head and large quill - allowing greater accuracy.

JET354550 JET J-A5816 15” Variable Speed Floor Drill Press, 1 HP, 115-230V, 1 PH

JET354400 JET J-2500 15” Floor Model Drill Press

• Cast Iron head • Large quill •Head casting features a permanently lubricated ball bearing spindle assembly, using four heavy duty ball bearings mounted in an enclosed quill for extended life • Large ground steel column diameter for maximum head and table support • Table tilts 45 degrees

• Speeds from 400 to 5000 RPM • Handwheel adjustment sets the speeds • Large 2-1/4” quill allows greater accuracy • 3” column diameter for maximum head support

The J-2500 15” Floor Drill Press boasts a 3/4hp motor and tilting table.

BENCH

JET577101 JET JBG-6A 6” Bench Grinder

• Totally enclosed pre-lubricated ball bearings • Heavy-duty guarded toggle switch on 8” and 10” • Rubber mounts prevent movement • UL listed

JET577102 JET JBG-8A 8” Industrial Bench Grinder

• Sharpens, shapes, deburrs and removes material fast • Totally enclosed, pre-lubricated ball bearings • Heavy-duty guarded toggle switch on 8” • One-piece quick adjusting spark guards • Cast iron wheel guards and dust vents

GRINDERS SUN5002A 8” Bench Grinder with Light

• Bright, flexible work light • Has two 8” grit wheels: coarse 36 and medium 60 • Each wheel has protective spark guard and adjustable eye shield • Cast iron base for durability • Mounting holes and rubber feet make grinder easy to mount on a stand or use on an approved worktable or workbench Conveniently placed, easy to use on/off switch. Includes long 6’ power cord. Ball bearing construction for smooth operation. 5/8” arbor accepts standard wheel. UL ans CSA listed. Includes eye shields and tool rests.

The Jet 8-Inch Bench Grinder comes with industrial grade 36-grit and 60-grit 8-inch wheels for maximum working versatility. The 1-horsepower, 115-volt motor operates at 3450 RPM and will deliver plenty of power for heavy grinding. The grinder sits on a rubber foot to prevent unwanted movement and can be bolted down if desired for maximum stability. UL listed.

JET577172 JET JPS-2A Pedestal Stand for JET Bench Grinders

• Heavy-duty cast iron construction provides strength and durability • Wide stance base gives you a stable grinder workstation • Coolant tank and tool tray are on an adjustable platform for your convenience • Compatible with all JET Bench Grinders • 30.6”L x 20.5”W x 5.1”H. Weight: 51.81 lbs

82

DWTDW758 8” Bench Grinder

• Powerful 3/4 HP induction motor provides superior power for industrial grinding applications • Rugged cast iron base and motor housing provide durability and prolong life • Motor runs at 3,600 RPM for high speed material removal • Precision-machined aluminum tool rests allow the user to accurately position work •R  ear exhaust ports in wheel guards for smoother operation 12-1/2” distance between wheels for longer and larger grinding applications. Amps 120V AC: 4; Spindle diameter: 5/8”; Tool length: 16”. Includes 36 and 60 grit wheels, eye shields, spark deflectors, tool rests and adjusting wrench.


shop equipment ABRASIVE

ALC41500 Triple Door, Foot Pedal Cabinet with Dust Collector

• Top door and 2 side doors • Dust collector mounted on the rear of the cabinet • Foot pedal operated • Heavy duty blast gun • Easy assembly This cabinet has a full width top door and two side doors for easy access. It has a 90 cfm dust collector mounted on the back of the cabinet. It is foot pedal operated for more control. It has a heavy duty blast gun with long lasting nozzles. It can be assembled easily with nut and bolt assembly. No holes to drill, just use a screwdriver to assemble. Includes a fluorescent light.

BLASTING

ALC40390 30” x 20” Plastic Benchtop Cabinet Blaster

• Made of tough LDPE polymer • 30” x 20” work area • One piece construction (no leaks) • Self adhesive underlay • Pistol grip trigger gun with 1/4” nozzle Also features an overside top window/door. Weighs 34 lbs.

ALC40391 Plastic Floor Model Cabinet Blaster • Rubber gloves included • Recommended use with shop vacuum (not provided) • Requires 36” x 24” x 24” floor space • Rear support frame

This plastic model floor cabinet blaster is made of tough LDPE polymer. It has a unique clam shell design, with a top that opens. Also it’s made with durable construction, steel angle support legs, and a window lens: 15-1/2” x 33”. Made with quality and durability to last!

ALC40403 36” x 24” Top and Side Door Foot Pedal Abrasive Blasting Cabinet

• 100 cfm dust collector included with all steel cabinets • Heavy duty 14 gauge steel - welded seams • Full width top drawer • Rubber gloves included Work area: 36”W x 24”H x 24”D. Height: 60”. Cushioned foam armholes.

ALC40413 60”W x 24”H x 24”D Blaster Cabinet with Double Doors and Foot Pedal • 100 cfm dust collector included • HD 14 gauge steel with welded seams • Full width top door • High quality lined 24” gloves • Cushioned foam armholes

ALC40416 Soda Blast Conversion Kit ALC40411 48” x 24” Steel Floor Model Cabinet Blaster with Foot Pedal

• 100 cfm dust collector included with all steel cabinets • Heavy duty 14 gauge steel - welded seams • Full width top drawer • High quality lined 24” gloves

• Converts regular blaster to a soda blaster • Removes paint and graffiti without harming surface • Safe to use on aluminum and fiberglass • Will not cause pitting or warping like abrasives • Environmentally friendly This conversion kit will creat a soda blaster from an abrasive blaster. Can be used back and forth. Abrasive removes rust and corrosion. 83


shop equipment SHOP

INT850SD 20 Ton Super Duty Shop Press

• Ideal for heavy duty truck applications, spring shops, industrial, or every day shops that find themselves in need of a step up from a regular duty press • A movable press head assembly and included V-blocks add versatility to these work horses • These come complete with foot operated air motor assist pin, press adapter kit and mountable/removable retracting guard for added safety • Overall Dimensions: 35 in. W x 64 in. H Bed Depth: 7 in. Bed Width: 19.25 in. Throat Depth: 5.75 in. Throat Width: 10.75 in.

PRESSES OMEHW93300C 25 Ton Press with Accessory Kit

• Excellent for bending, bonding PREPAID FREIGHT or straightening applications • Multi-position bed for work height adjustment • Heavy steel welded construction • Includes hand winch for easy bed adjustments • Includes 25 ton press accessory kit and arbor plates

OMEHW93401 55 Ton Shop Press with PA2000 Air Pump

ASTTS22A Hydraulic Press - 20 Ton Capacity

• Heavy duty return springs for fast ram retraction • Reinforced head plate • Arbor plates included • Safety bypass valve assures unit will not exceed rated capacity The Astro Pneumatic Tool TS22A Hydraulic Press - 20 Ton Capacity is built with heavy duty return springs for fast ram retraction, and a reinforced head plate. This item includes arbor plates, and a safety bypass valve which assures the unit will not exceed its rated capacity. It meets ANSI standards for performance and safety.

• Excellent for bending, bonding, or straightening applications • Multi-position bed for work height adjustment • Heavy gauge, welded steel construction • Includes hand winch for easy bed adjustments • Industrial grade rams and hydraulic pumps The Hein-Werner HW93401 is an American Made 55 ton shop press with a powerful air motor. It is made from heavy gauge steel with all welded construction for years of dependable service in even the highest volume applications.

PREPAID FREIGHT

SUN5730 30 Ton Manual Hydraulic Shop Press SUN5720 20 Ton Manual Hydraulic Shop Press

• Fully welded design for superior durability and strength • Includes 3 piece punch kit, bed plates, and bearing shield • Ideal for straightening, bending, removing/ installing gears, bearings and bushings

SUN5720AH 20 Ton Air/Hydraulic Shop Press

84

• Fully welded design for superior durability and strength • Includes bed plates and bearing shield, ideal for straightening, bending, and removing/installing gears, bearings and bushings • Proudly made in the USA • Overall Height (in.)70.5; Base Width (in.)29.875; Vertical Throat Opening (in.)3.5to44; Throat Width (in.)28; Ram Stroke (in.)6.375; Ram Dia. (in.)2.25; Cylinder Bore (in.)3.15


shop equipment SHOP

PRESSES SUN5740EP 40 Ton Electric Hydraulic Shop Press

SUN5740 40 Ton Hydraulic Shop Press

• Fully welded design for superior durability and strength • Versatile sliding head adapts to project needs • Includes bed plates and bearing shield • Ideal for straightening, bending, and removing/installing gears, bearings and bushings

• Proudly made in the USA • Top-of-the-line electric motor design allows simple, handsfree operation • Includes bed plates and bearing shield • Capacity (tons) 40; Overall Height (in.)76.25; Base Width (in.)32; Vertical Throat Opening (in.)1 to 40; Throat Width (in.)32; Ram Stroke (in.)8.25; Ram Dia. (in.)2; Cylinder Bore (in.)6

SUN5740AH 40 Ton Air/Hydraulic Shop Press

• Sliding head allows for offset pressing providing more room on one side if needed when pressing irregular objects • Convenient air motor design eliminates need for pumping • Proudly made in the USA • Capacity (tons) 40 @ 100 PSI; Overall Height (in.)76.25; Base Width (in.)32; Vertical Throat Opening (in.)1 to 40; Throat Width (in.)32; Ram Stroke (in.)6.75; Ram Dia. (in.)2; Cylinder Bore (in.)3.5

SUN57100AH 100 Ton Air/Hydraulic Shop Press

• Convenient air motor eliminates manual pump operation • Sliding head allows for offset pressing providing more room on one side if needed when pressing irregular objects • Capacity (tons) 100 @ 100 PSI; Overall Height (in.)78; Base Width (in.)36; Vertical Throat Opening (in.)1 to 32; Throat Width (in.)34; Ram Stroke (in.)7; Ram Dia. (in.)2.5; Cylinder Bore (in.)5.5

SUN5750AH 50 Ton Air/Hydraulic Shop Press

• Convenient air motor eliminates need for manual pumping • Sliding head allows for offset pressing providing more room on one side if needed when pressing irregular objects • Capacity (tons) 50 @ 100 PSI; Overall Height (in.)74; Base Width (in.)35; Vertical Throat Opening (in.)1.5 to 34; Throat Width (in.)35; Ram Stroke (in.)6.75; Ram Dia. (in.)2; Cylinder Bore (in.)3.5

SUN5750EP 50 Ton Electric Hydraulic Shop Press • Top-of-the-line electric motor design allows simple, hands-free operation • Includes bed plates and bearing shield • Capacity (tons) 50; Overall Height (in.)74; Base Width (in.)35; Vertical Throat Opening (in.)1.5 to 34; Throat Width (in.)35; Ram Stroke (in.)8.25; Ram Dia. (in.)2; Cylinder Bore (in.)6

SUN57100EP 100 Ton Electric Hydraulic Shop Press

• Fully welded design for superior durability and strength • Top-of-the-line electric motor design for simple, hands-free operation • Includes shock-absorbant glycerin gauge and includes bed plates and bearing shield • Proudly made in the USA • Overall Height (in.) 78; BaseWidth (in.) 36; Vertical Throat Opening (in.) 1 to 32; Throat Width (in.) 34; Ram Stroke (in.)7; Ram Dia. (in.) 3; Cylinder Bore (in.) 6

85


shop equipment SHOP

OTC1825 17-1/2 Ton Open Throat with Hand Pump Floor Press

• Head is movable from side-to-side for full off-center load pressing. • Ram-to-work distance is adjusted by a forcing screw that’s extended or retracted with a speed crank. • “Open Throat” feature is great for bulky jobs, and allows ram to be mounted outside press frame. • 17 1/2-ton “Open Throat” press with 201832 ram with 2” stroke, 4002 hydraulic hand pump, 9650 gauge, 9767 hose (1/4” I.D. X 6’), 32118 adjusting screw, 24814 speed crank, 28228 ram cap, and 42733-WH2 pump mounting bracket.

PRESSES OTC1872 55-Ton Heavy-Duty Press

• Includes double-acting ram with 13” stroke • Includes electric/hydraulic hand pump, gauge, hoses, and pump mounting bracket • Covered by OTC Lifetime Marathon Warranty • Side-to-side positioning of ram allows full capacity pressing along entire bolster length without buckling or bending.

OTC1845 55-Ton Capacity Heavy Duty Press with Electric / Hydraulic Pump

OTC1834 25 Ton Capacity Shop Press

• Tough, economical press is ideal for pressing rear axle bearings, piston pins, and much more • Large 30” x 46” work area under ram makes positioning of even bulky work easy • Press bed is easily raised and lowered by a dependable lifting mechanism • Press complete with air-driven No. 4020 hydraulic pump; No. 9652 gauge; No. 21815 tee; No. 9768 hose and hydraulic ram with 6-1/4” stroke

OTC1833 25 Ton Capacity Floor Press with Hand Pump

• Covered by OTC Lifetime Marathon Warranty®. • Hydraulic ram features 13” of stroke. • Includes single-acting ram No. 52380 with 13” stroke; No. 4044 electric/hydraulic pump; No. 9651 gauge; No. 303563 hose (3/8” ID x 8’); and pump mounting bracket.

OTC1847 55-Ton Capacity Heavy Duty Press with Air / Hydraulic Pump

• Includes single-acting ram No. 52380 with 13” stroke; No. 4022 air/hydraulic pump; No. 9651 gauge; No. 9781 hose (3/8” ID x 10’).

• 4002 hydraulic hand pump, 9652 gauge, 24815 tee, 9767 hose (1/4” I.D. x 6’), ram with 6-1/4” stroke, and 42733-WH2 ump mounting bracket. Floor space: 41-1/2” x 28”.

OTC1850 55-Ton Capacity Economy Shop Press

OTC1826 25-Ton Capacity Heavy-Duty “Open Throat” Press with Hydraulic Hand Pump

• “Open throat” feature enables ram to be positioned outside of press frame for fast axle bearing removal and installation, as well as other tasks • Press bed is raised or lowered with a hand crank, and a spring-return hydraulic ram is laterally adjustable for off-center work at full capacity Includes 25-ton press. No. 4016 hydraulic hand pump; No. 52025 hydraulic ram with 14” stroke; No. 9652 gauge; No. 303563 hose (3/8” ID x 8’); and pump mounting bracket. Rugged press is covered by OTC Lifetime Marathon Warranty®

OTC1826A 25-Ton Capacity Heavy-Duty ‘Open Throat” Press with Air/Hydraulic Hand Pump 86

• Durable steel frame resists buckling and bending • Hand-operated winch and cable mechanism adjusts lower press bolster • Includes hydraulic ram with 6-1/4” stroke • Also includes; hydraulic hand pump, gauge, hose, and pump mounting bracket • Covered by OTC Lifetime Marathon Warranty

OTC1851 55 Ton Capacity Economy Shop Press with Air/Hydraulic Pump


shop equipment SHOP

PRESSES

OTC1854 100-Ton Capacity Economy Shop Press with Electric/Hydraulic Pump

• Includes hydraulic ram with 10” stroke • Includes electric/hydraulic pump, gauge, hose, and pump mounting bracket • Covered by OTC Lifetime Marathon Warranty

OTC1857 100-Ton Capacity Heavy-Duty Shop Press

• Ram head glides smoothly on rollers for easy horizontal adjustments; rugged press frame will withstand a full capacity load with the ram head in any position across the upper bolster. • Covered by OTC Lifetime Marathon Warranty® Includes single-acting No. 52434 ram with 10” stroke; No. 4008 hydraulic hand pump; No. 9651 gauge; No. 9781 hose (3/8” ID x 10’); and pump mounting bracket.

OTC1858 100-Ton Capacity Heavy-Duty Shop Press

• Upper bolster can be lowered for convenient positioning during repetitive jobs • Includes double-acting ram with 13” stroke, 3-phase, 220V, 3450 rpm electric/hydraulic pump, and two hoses • Covered by OTC Lifetime Marathon Warranty®

HOISTS

/ CHAIN PULLERS

1 Ton Electric Chain Hoists

• Single-phase, 115/230 voltage (AC), 16.0 amps at low voltage • 1 ton rated load, 16 ft./min. lifting speed • Built-in, multiple-disc, magnetic brake provides positive load holding and spotting • Adjustable upper and lower limit switches for maximum flexibility in regulating load travel All Milwaukee Professional Electric Chain Hoists offer an array of load lift and height options. With 1/2 to 2 Ton capacities and 10 ft. to 20 ft. lifting heights, you can order a Milwaukee Electric Chain Hoist to meet your roughest needs. All offer a multi-disc magnetic brake for positive load holding and spotting. Adjustable upper and lower limit switches, overload limiting clutch and latch-type ridged top hook. You can get single or three-phase voltage motors to meet your operation power requirements. The 24-volt pushbutton station fits easily in your hand to allow thumb, trigger or two-handed operation. MLW9565 10 Foot Lift Height MLW9567 15 Foot Lift Height

JET S90 Series Hand Chain Hoists

• Weston Style Dual Pawl Brake System – Dual Pawl design increases safety by splitting the opposite sides of the ratchet gear for greater load security • Alloy Steel Hooks – Industrial rated hooks rotate 360 degrees for easy rigging, hooks slowly stretch to indicate an overload situation increasing jobsite safety • Needle Bearing Design

JET101910 - 1 Ton 10’ Lift JET101930 - 2 Ton 10’ Lift JET101941 - 3 Ton 15’ Lift

AMG660 6 Ton Chain Puller (Freight Delivery)

• Rated capacity: 6 Ton • Standard lift: 5’ • Chain diameter: 13/32” • Handle length: 16-3/8”

AMG420 2 Ton Chain Block / Hoist

• 5/16” Chain, 10’ Lift • 2 Ton Capacity • .9 pounds • D  rop Forged Safety Hooks • Thick Steel Construction and Heat Treated • Triple Geared An extensive line of chain block hoists matches up with the many and varied needs in industrial, automotive, farm and marine uses. Every model in the line is specially heat-treated. Maintenance costs are low because of interchangeable parts. All are fully warranted for one year. 87


shop equipment MATERIAL HANDLING /

AMG3400-1 600 lb. Capacity Hand Truck

CARGO CONTROL

ACR557 Flat Bed Trailer Ratcheting Strap with Flat Hooks - 2” x 27’

• 10” ball bearing wheels • Vertical or horizontal loading • Easy storage, standing up or hung from handle • 5 year warranty

• High UV Resistance • Wide Handle Ratchet • Flat Hook Features Radius Pad Technology • High Capacity Polyester Webbing • Meets DOT and WSTDA Requirements

AMG13050 3/8” Chain Load Binder

• Electric welded chain link for flexibility • Drop forged one piece fork lugs and handle • Drop forged ball and socket • Drop forged and heat treated

ACR557WHK Flat Bed Trailer Ratcheting Strap with J Hooks - 2” x 27’

Size/grade-5/16”/70---3/8”/40 Approx. weight. Each pounds-7-3/4 Handle length-15-1/2” Take up-4” Working load permit-5,400 Proof test load-10,800 Minimum breaking strength-19,000

MTNCM-3000-0DLB 3000 PSI Cold Water Pressure Washer

• Mi-T-M Series 208cc OHV Engine with low oil shutdown • Direct drive Mi-T-M crankshaft pump • Powder coated steel base plate • 1” powder coated steel tube handles • 25’ x 3/8” wire braided pressure hose

PARTS

WASHERS

MTMHSP-3504-3MGH Honda Gas Hot Water Pressure Washer • 13 HP Honda motor • 3500 PSI • 3.3 GPM

WASHER CABINETS

The cut-away sides under the door allow you to wheel your engine crane right over the table for easy loading and unloading. 19 high pressure spray jets quickly clean the greasiest engine components. Each cabinet includes a 60 minute timer and requires no harmful solvents — using only hot water and biodegradable detergents for an environmentally safe operation.

• Automatic cleaning • 1,000 lb. load capacity • Includes parts basket and tree • 1 year warranty on material and workmanship The SWC-500’s 1000 LB capacity turntable is strong enough for any size auto or light truck engine.

88

• 6000 pound capacity • 200 degree turning radius allows room to maneuver in tight quarters • Solid steel push rods never need adjustment • Articulating 7” poly-over-aluminum steer wheels ensure continual contact with uneven floors • One-piece cast pump features high quality seals, hardened and chroma plated ram and piston, top-of-stroke and overload safety bypass valves Height: 18”, width: 27”, length: 59”. This low cost Pallet jack is full of features. With a tight turn radius and low profile, this work horse will serve you for years to come.

PRESSURE

ATESL-STD-500 550 LB / 50 GAL Capacity Spray Wash Cabinet

JET140175 JET PTW-2748 27” x 48” 6000 lb. Pallet Jack

ATESL-STD-750 1250 LB / 53 GAL Capacity Spray Wash Cabinet

• Includes parts basket and tree • 1,250 lb. load capacity • 1 year warranty on material and workmanship The SWC-750’s 1,250 LB capacity turntable is designed to handle light diesel engines and engine parts for the truck repair and maintenance trade.


shop equipment

VISES

Tradesman Vises

• Wider Jaws provide greater clamping surface • Fully enclosed spindle and nut increases the life of the vise • 360° swivel base with double lockdowns WIL1755 - 5-1/2” WIL1765 - 6-1/2”

WIL10010 Wilton All Terrain Vise

• Fits a standard 2” hitch and includes a hitch pin for security • Lightweight with an integrated carrying handle for easy transport • Patented 360 degree locking handle secures handle while driving or repositions it while working

WIL648HD 8” Utility Vise

• 7-1/2” jaw opening • 4-1/2” throat depth • Swivel base

WIL675 6” Utility Vise

• 6” jaw opening • 4-3/16” throat depth • Swivel base

Mechanic’s Vise

• Large anvil work surface WIL745 (5”)

WIL21500A Special Edition 746 Mechanics Vise

SPECIAL EDITION Steel Bench Vises

• Lockable swivel bases. 10 year warranty.

• Swivel base rotates 360° and has double lockdowns ensuring maximum stability • Replaceable hardened steel top and pipe jaws • Heavy-duty 30,000 PSI iron casting

PART NO. WIDE Opens to KTI64105.........5 inch ................7 inches KTI64106 ........6 inch ................8 inches KTI64108 ........8 inch ................9 inches

WELDING

MTNTIG6155 155-Amp DC Inverter Portable (230-Volt) TIG Welding System

• Welds mild, stainless and chrome moly steels from 28 gauge to 3/16” with AR/CO2 shield gas • Infinitely adjustable output power 5-155 amps allows precise control on all material thicknesses • Compact 17V torch with 12.5’ dinse connect flex-cable for fatigue free operation in tight areas Portable professional 155-amp dc inverter TIG welding system features infinitely adjustable output from 5-155 amps and lift-arc ingnition on 230-volt single phase line and is capable of welding all steel alloys from 28 gauge to 3/16”. Inverter power supply weighs less than 30 lbs. making this the perfect unit for automotive and light industrial applications. Package includes 17V torch and wide jaw clamp with UV/IR dinse connect cables, dual gauge gas regulator and hose, AK-2 torch kit and operator manual.

LEWK1297 AC/DC 225/125 60HZ Arc Welder

• AC welding output range of 40-225 amps and a DC welding output range of 30-125 amps • Easy to install. Comes with attached input power cable and plug. • Easy to operate with front mounted AC/DC polarity switch and full range amperage selector switch for accurate and dependable procedure setting • Traditional design provides long-life and low cost operation • Compact size allows for easy storage and handling

MTNMIG6160 160-Amp Commercial Portable (230-Volt) MIG Welder • Gas (MIG) and no gas (flux cored) capable with 4 step output power • Welds from 24 gauge to 1/4” MIG and to 5/16” flux-cored wire . 023” - .035” diameter • Adjustable wire speed 50-300 IPM with 4 step output power

Package includes TW1-M torch 8.5’, work clamp, adjustable gas regulator, mild steel .030” wire, mask, chipper hammer and operator manual.

FPW0384-2682 Firepower Oxyfuel 350 Heavy Duty Outfit

• Flexible: Cutting torch and handle are ready for multiple gas options; Oxy-Acetylene, Propane, Butane, Natural and LP Gases •H  igh Capacity: Cut 1/8” (3.2 mm) to 6” (152 mm) with optional tips. Heat using multiple heat nozzles. Weld up to 1/2” Steel. Optimized to cut 1”, weld 1/8” out of the box Includes: 350 Series cutting attachment and handle, 350 Series Oxygen/ Acetylene regulators, flashback arrestors, dual R-grade hose 12.5’ long, #1 cutting tip, #2 welding nozzle, striker, protective eye-wear, and manual. 89


shop equipment

KING PIN

& ANCHOR PIN PUSHER OTC4241 Kingpin and Brake Anchor Pin Pusher without Hydraulics OTC6492 Engine Preluber Kit

OTC4240 Kingpin and Brake Anchor Pin Pusher Set with Hydraulics

• Ensures oil is present to internal engine components on the first start of a new or rebuilt engine, or after major engine work is performed • Required to prime the oil pump and fill the oil galleries and internal engine components with clean, new oil • Connects to engine oil system at the oil pressure sensor on a variety of domestic and import engines • Oil pressure sensor adapters included

• Five special collars and two pins allow this unit to work on both straight and tapered kingpins and accommodates sizes from 7/8” to 2” in diameter and up to 11-1/4” long • Tool delivers 30 tons of hydraulic force to push out even the most corroded kingpins • The anchor pin can be removed quickly by using the special adapter installed in the pusher’s base block and the unit positioned over the brake’s spider • Works on many models of trucks and buses • 27-1/2” high X 8-1/2” wide; 30 ton capacity ­ With this pin remover, hydraulic force and precision tooling replace torch-and-hammer methods for getting the job done quickly and easily. Set includes No. 4002 hydraulic hand pump, No. 9767 hose, No. 9798 hose-half coupler, No. 4121 Power Twin 30-ton ram, and No. 29424 anchor pin adapter.

BLOW GUNS CRD63050 Truckers Air Seat Blow Gun Kit

IPA8052 36 Air Comb® Filter & Radiator Cleaner

• Nylon 12 ft hose, coiled, burst pressure up to 120 PSI • 1/4” NTA air line tee • Meets DOT Standards • SAE approved

• Clean cylindrical type air filters • Clean radiators and AC condensers • 36” focused high-pressure output • Long reach 90º air flow • 5x the air volume

IPA8053 Air Comb® Filter & Radiator Cleaner

EXHAUST SYSTEMS CRU19MADF30 Door Ports

• Allows hose to be vented through the door • 3” aluminum

CRU16LDF25 2-1/2” Rubber Door Port

Tailpipe Adapters CRU16LRY25 2-1/2” Y Connector

• Allows 3 hoses to be joined together

CRU16LRY30 3” Y Connector

• Allows 3 hoses to be joined together

90

• Designed for easy adapting to all sorts of vehicle tailpipes • 2-1/2” Rubber connector

CRU17AF300 - Straight adapter

• With hook & chain fits tailpipes up to 2-1/2”

CRU17AF475 - Oval adapter (3” x 6” oval) • Fits tailpipes oval 2-1/2” x 5-1/2” • 3” Rubber connector

CRU17ARA250 - Tailpipe/Stack Adapters


shop equipment CREEPERS &

SEATS engineered products

OME92450 450 Lbs. Creeper Seat Tool Box • 450 lbs rated capacity • 4 full bearing 3” casters along with polyurethane wheels • (3) 12-3/4” x 7-1/2” x 2 -1/4” drawers

TRX1-100 ProGear Wide Body Creeper

• Wide Body Deck for increased comfort and productivity • Low profile, with 5” rubber casters that roll over most common shop items • Contoured deck provides extra padding and lumbar support

$49.35 SUN8507 17” x 14” x 14” Creeper Seat with Lower Shelf

• Powder coated black frame • 2.5” Casters • Includes convenient 1” deep parts tray: 11.5” x 12.5” • Frame dimensions: 17” deep x 14” long x 14” high

SUN8509 EZ Set™ Pneumatic Professional Shop Seat • Air cylinder for easy height adjustment • Five 2.5” casters for ease of mobility • Cushioned black vinyl cover • Large, reinforced 15.25” diameter 1” deep tool tray • Individual replacement casters available

WHIHRS2WS Flame Resistant Weld Seat

• 1” round tube frame with flame resistant plywood, foam, and fabric • Flame resistant fabric comes in orange • Wide base for better stability • 3” oil resistant rollers • 15” x 15” storage tray with magnetic strip to hold small parts and tools

WHIMTLV6WC 40” Weld Creeper

• 40” metal frame creeper with flameresistant, plywood, and fabric • Flame resistant material comes in orange • “V” drop in shoulder area for comfort • Six 2-1/2” oil resistant rollers • Powder coated to resist rusting

TRX3-100 Foldable TopSide Creeper

• Adjustable from 48” to 64” • Slip resistant steps • Durable powder coated steel frame construction

TRX3-700 ProGear TopSide Creeper

• New and improved design, safe and productive engine access for 3/4 ton, 1 ton and up trucks • Fully padded ergonomic sling deck, forms to your body • Easy 15 minute assembly • Takes up 54% less space than the original design • 17% higher reach, 18% wider steps, I frame design give 20% more access under the hood

TRX3-120 Topside Jr. Creeper

• Heavy-duty steel frame • 10” x 13” padded chest rest • 300 lb work capacity • Height adjustable from 35” to 39” • Comfortable and safe • Weighs just 21lbs. for easy transport from car to car • Stores compactly It helps take the work out of the work place. The Topside Jr. protects the vehicle and your back when working over the engine compartment.

OTC1734A Heavy-Duty Wheel Step

• Fits heavy duty vehicles (Class 7/8) • 300 lb. capacity • Installs in seconds, adjusts to fit 22-1/2” to 24” wheel sizes • Non-skid platform surface • Comes with OTC’s Lifetime Marathon Warranty® 91


shop equipment AIR

COMPRESSORS

IRTUP6-7.5TAS-150 7.5 HP Rotary Compressor, TAS Pkg, 230-1-60,80 gallon

• 7.5hp, 25CFM @ 150 PSI, 230-1-60, 80 gallon tank • Total Air System Package includes integrated refrigerated air dryer, after-cooler and dual filter system •Quiet operation - fully enclosed units operating at 65 dBA • Tank-mounted Design for easy Installation - “Plug and Play” • Nation-wide Service Coverage

IRTC2475F13GH Two-Stage Gas Powered Air Compressor

• Durable cast iron for 100% continuous duty application • Honda engine • Precisioned engineered components for over 15,000 hours of trouble free use • Extended 2 year warranty when used with Ingersoll Rand’s all season select synthetic lubricant • Advanced safety features including low oil-level shutodwn for gas engines

IRT2475F14G 14 HP Gas Drive Air Compressor - Kohler Engine

• 14HP Kohler Engine, 25 CFM @ 175 PSI • 30 gallon tank - great for truck-mounting • Alternator Charging System included • Electric ignition and pull cord operation • Two-Year warranty on pump with purchase of IR Start up Kit

IMC3G3HH 11 HP 30 Gallon Horizontal Two Stage Gas Driven Air Compressor

• 12 volt electric start and recoil start • Start key / panel • Honda engine • Fully enclosed belt guard • ASME tank and safety valves

IMC3G3HHL 13 HP Honda Two Stage Engine Powered Compressor

• Two year warranty • 12 volt electric and recoil start • Unique E-Z pull tank drain • Fully enclosed belt guard • 12 volt charging system 92


shop equipment / AC

AIR CONDITIONING Evaporative Cooling Units • Lowers ambient temperatures an average 20º F

PORPACJS2401A1 16” Portacool Jetstream 240

3 YEAR WARRANTY

ON ALL ELECTRICAL COMPONENTS

• Large, easy-roll casters make moving this evaporative cooler around a breeze • Liquid level indicator with automatic pump shutoff protects your product and investment • Equipped with KUUL evaporative media, the highest-quality evaporative media available and made in the USA exclusively for Portacool products • Lifetime warranty on evaporative cooler housing

PORPACJS2701A1 48” Portacool Jetstream 270

3 YEAR WARRANTY

ON ALL ELECTRICAL COMPONENTS

• Cools the largest area in the Portacool Jetstream™ series • Liquid level indicator with automatic pump shutoff protects your product and investment • Equipped with KUUL evaporative media, the highest-quality evaporative media available and made in the USA exclusively for Portacool products In Stock NOW • Lifetime warranty on evaporative cooler housing

Freight Pre-Paid

PMS-185 and black

ROB75700 CoolTech Coolant Exchanger

• Engine Off feature removes pulleys, belts and fan blades from the safety equation • No additional ventilation required •PMS-185 Vacuum mode creates a “push/pull” exchange process allowing and black technician to safely remove high pressure in a hot system • “Hands-off” transfer of used coolant to a bulk tank prevents spills and helps protect the technician

ROB17800B Refrigerant Recovery/Recycling/Recharge Machine for Multiple Refrigerants

Recovers, recycles, evacuates, and recharges R-12, R-134a, R-22, R-502 MP and HP blends, and many more • Ideal for refrigerated trailers, buses, RVs with refrigerants • Lockout panel prevents mixing of refrigerants • Comes with two 50-pound tanks • Internal clearing

1-2-5 YEAR WARRANTY

CPSFX1234 Advanced 1234 Refrigerant Management Center

• 7” Color touch screen control panel • P atented oil-less compressor • Patented motor-controlled ball valves • S AE J2843 CPS Automotive presents the latest in ease and endurance with its FX Series line of AC RRR equipment. The new Management Center quickly and efficiently recovers, recycles, and recharges automotive AC systems.

In Stock NOW Freight Pre-Paid 93


manufacturer index AC Delco (ACD)...........................................................9 Accu-Torq (ACC).......................................................77 Aircat (ACA)................................................................4 ALC Keysco (ALC).....................................................83 AME International (AMN).......25, 58, 60, 67, 69, 73, 78 American Forge & Foundry (INT)..................53, 54, 57, .............................................................. 59, 65-67, 84 American Imc (IMC)..................................................92 American Power Pull (AMG)................................ 87-88 Ammco (AMM)....................................................68, 96 Ancra / S Line (ACR).................................................88 Armstrong (ARM).......................................... 20-21, 24 Associated Equipment (ASO).........................27, 29, 31 Astro Pneumatic Tool (AST).....................20, 58, 67, 84 Atlas Automotive Equipment (ATE)1, 53, 64, 70-71, 88 Autel Tech (AUL).......................................................39 Back Buddy (BBD).....................................................64 Bend-Pak (BEN)..............................................1, 42, 52 Blackhawk / Shinn Fu Company (BHK)..................3, 66 Bosch (BOS)..................................................34, 68, 70 Branick Industries, Inc. (BRA)........................69, 71, 77 Cal Van / Horizon Tool (CAL)......................................41 Cando Int’l (CDO)............................................5, 34, 96 Carrand (CRD)...........................................................90 Champion Fulfillment (CMF)......................................31 Channellock Inc. (CHA)..................................17, 22, 41 Chicago Pneumatic (CPT)..............................5, 6, 8, 25 Cooper Tools (CRS)...................................................17 CPS Products, Inc. (CPS)...........................................93 Crushproof Tubing (CRU)...........................................90 DeWalt (DWT).....................................................47, 82 Esco Equipment (ESC)............................25, 59, 60, 65, ........................................................67, 69, 72, 76, 78

E-Z Red Company (EZR)......................................21, 80 Firepower (FPW).......................................................89 FJC, Inc. (FJC)..........................................................27 Gaither Tool (GAI)................................................71, 74 Gearwrench (KDT).................................................5, 24 Goodall Mfg. (GDL)........................................ 27, 30-31 Grey Pneumatic (GRE)............................. 11, 12, 14-15 Ingersoll Rand (IRT)......................... 1, 2, 4, 7-8, 47, 92 Innovative Products Of America (IPA)................. 37-38, ..............................................................41, 50, 78, 90 J S Products, Inc. (Steelman)....................................39 John Dow Industries (DOW).............. 42, 43-44, 46, 50 K Tool International (KTI).........8, 11, 13, 16-18, 20-22, ................................ 25, 27, 40, 55-57, 59, 67, 80, 89 Ken-tool (KEN).......................23, 71, 74-76, 78-79, 96 Launch Tech USA (LAU)............................................34 Lincoln Electric (LEW)...............................................89 Lincoln Lubrication / Industrial (LIN)........ 42, 43-48, 50 Lisle Corp (LIS)...................................................41, 44 Lock Technology, Inc. (LTI).......................................40 Makita (MAK)............................................................10 Mayhew Tools (MAY)................................................19 Midtronics Inc. (MID).................................................28 Milwaukee (MLW).........................................10, 46, 87 Mi-t-m Corporation (MTM)........................................88 Mountain (MTN).........................4, 8, 23-25, 46, 88-89 Mueller-Kueps (MLK).................................... 40, 78-79 New Pig Corp (NPG)............................................43, 49 Nexiq Technologies (MPS)................................... 35-37 Noregon Systems (NRS)................................ 32-33, 95 Omega (OME).................................... 3, 54-56, 59, 62, .................................................. 64, 66-67, 84, 91, 96

OTC (OTC).................................. 14, 16-17, 19, 28, 34, ................................ 37, 39, 40-42, 44, 50-51, 54-58, ................ 60-68, 73-74, 77, 79, 80-81, 86-87, 90-91 Plews (PLW)..............................................................50 Port-A-Cool (POR).....................................................93 Power Probe Inc. (PPR).............................................37 Precision Instruments, Inc. (PRE)...............................25 Private Brand Tools (PBT)..........................................76 Robinair (ROB)..........................................................93 S and G Tool Aid (SGT)..............................................77 Schumacher/DSR (SCU)......................................26, 28 SK Hand Tools (SKT)..................................... 13, 20-21 Solar / Clore Automotive (SOL)................ 26, 28-29, 31 Spectronics Corp / Tracer (TRA)................................37 Star Products (STA)...................................................39 Sunex International (SUN)........ 4, 8, 10, 13-18, 40, 53, ...................................... 55, 58, 66, 80, 82, 84-85, 91 The Main Resource (TMR)...................................24, 71 Thexton Mfg Co. (THX)..............................................50 Tire Service Equipment (TSI)...............................71, 74 Titan (TIT).....................................................19, 21, 24 Traxion Engineered Products (TRX)...........................91 Tuthill Transfer Systems (FIL)..............................46, 50 Uni-Ram Corp (UNR).................................................42 V-8 Tools (V8T).........................................................18 Vaughan & Bushnell Mfg. (VAU).................................23 Vise Grip (VGP)..........................................................23 Waekon Corporation (WAE).......................................39 Whiteside Mfg. (WHI)................................................91 Wilmar/Performance Tool (WLM)...............................67 Wilton (WIL)........................................................24, 89 Wilton-Jet (JET)............................................ 82, 87-88

Descriptive index 4-Post Lifts.............................. 1, 52-53 Abrasive Blasting...............................83 AC (Air Conditioning)..........................93 Adjustable Wrenches.........................17 Air & End Lifts..............................54, 96 Air Compressors................................92 Air Conditioning (AC)..........................93 Air Lifts Jacks....................................53 Air Pumps..........................................60 Air Saws..............................................8 Air Tools.......................................... 2-9 Alignment Tools.................................80 Aluminum Jacks and Rams................60 Axle Jacks................................... 58-59 Barrel Kits............................................8 Battery Charging Racks.....................31 Battery Testers..................................28 Bench Grinders..................................82 Blow Guns.........................................90 Booster Cables..................................27 Booster Packs....................................26 Bottle Jacks.......................................67 Brake Drum Dollies............................65 Cargo Control.....................................88 Chain Pullers.....................................87 Chain Wrenches.................................17 Charging / Starting...................... 26-31 Chrome Accessories..........................21 Chrome Sockets Sets.........................20 Clutch & Flywheel Handlers...............61 Cordless Tools...................................10 Creepers & Seats...............................91 Crowsfoot Wrenches..........................17 Cutters..............................................22

DEF (Diesel Emission Fluids)..............50 Demounting / Mounting Tools...... 74-76 Diagnostics.................................. 32-39 Dial Gauges.......................................77 Diesel Emission Fluids (DEF)..............50 Diesel Particulate Filters (DPF)...........51 DPF (Diesel Particulate Filters)...........51 Drill Presses......................................82 Engine Cranes......................... 3, 62-63 Engine Service Tools.................... 40-41 Engine Stands................................3, 62 Exhaust Systems...............................90 Filter Crushers...................................42 Filter Evacuation................................42 Floor Cranes......................................63 Floor Jacks........................................55 Fluid Dispensing &Waste............. 44-48 Fluid Transfer.............................. 43-44 Fork Lifts...........................................60 Fuel Caddy Transfer...........................49 Fuel Drainage & Waste......................43 Fuel Systems Tools............................41 Generators................................... 30-31 Grease Guns................................ 46-48 Grease Pumps...................................45 Grease Reels.....................................46 Grinders.........................................8, 10 Hammers........................... 8, 23-24, 74 Hand Tools.................................. 12-24 Hoists................................................87 Hooks Pick Sets.................................19 Hydraulic Jacks................. 3, 55, 58-59 Impact Socket Accessories................16 Impact Sockets............................ 10-16

Impact Sockets (Budd Wheel)............16 Impact Sockets (Wheel Service)... 15-14 Impact Wrenches....................... 1-9, 12 Inspection..........................................39 Inverters............................................26 Jack Stands.................................55, 67 Jimmy Bars & Pry Bars......................19 King Pin & Anchor Pin Pushers...........90 Lifting & Hydraulics...................... 52-67 Load Levelers & Slings......................64 Lubrication & Fluid Handling........ 42-50 Material Handling..............................88 Measurements...................................25 Mounting / Demounting......... 74-76, 96 Needle Scalers.....................................8 Non-Ratcheting Wrenches...........18, 21 Nut Buddy..........................................78 Oil Change Tools................................41 Pipe Wrenches...................................17 Pliers and Cutters........................ 22-23 Polishers..............................................2 Porta Powers.....................................66 Power Invertors.................................26 Power Trains.....................................61 Pressure Washers..............................88 Pry Bars & Jimmy Bars......................19 Puller Sets................................... 80-81 Refrigerant Recyclers.........................93 Sanders...............................................2 Scan Tools and Software........ 4, 32-36, 95-96 Scan Tools Testing............................38 Service Jacks.......................... 3, 55-56 Shop Equipment.......................... 82-83

Shop Presses............................... 84-87 Slings & Load Levelers......................64 Sockets Sets......................................20 Specialty Jacks..................................60 Specialty Testers.........................37, 39 Start-Alls / Generators................. 30-31 Starting / Charging...................... 26-31 Tire & Wheel Service................... 68-79 Tire Balancers...................................70 Tire Bead Tools............................ 71-73 Tire Cages.........................................71 Tire Changers........................ 68-70, 96 Tire Hammers....................................74 Tire Irons..................................... 75-76 Tire Pressure Equalizers....................78 Tire Spoons.......................................74 Tire Spreaders............................. 69-70 Torque Sockets..................................77 Torque Wrenches..................... 9-10, 25 Train Lifts..........................................61 Transfer Tanks..................................49 Transmission Jacks................. 3, 56-57 Transmission Tools............................41 Truck Lifts................................... 58-59 Truck Ramps.....................................66 Truck Spill Kits...................................49 Vises.................................................89 Washer Cabinets Parts.......................88 Welding.............................................89 Wheel Dollies............................... 65-66 Wheel Lifts.................................. 65-66 Wheel Service Sets............................15 Work Lights.......................................71 Wrenches.................................... 17-18

Freight Terms • Freight delivery shipments must be inspected for damage and loss. • Inspect for obvious damage and concealed damage. • Confirm carton/pallet count. • Refuse shipment or notate damage/loss on delivery document. • Accepting and signing for a damaged or a short shipment releases the carrier and distributor from any claim responsibility. • Additional services provided by the carrier such as, lift-gate, residential delivery or special handling will incur additional freight charges. 94


N E W ! f r o m NOREGON

NRS263025-NS NRS232125-NS NRS212100-NS

A more power ful multi-brand diagnostic solution now includes: + Expanded bi-directional controls and tests (Mack, Volvo, Detroit, and Cummins)

+ All make, all model coverage for class 7-8 heavy-duty vehicles

#1

+ Medium-duty coverage for Ford, GM & Sprinter

+ Over 44,000 OEM level fault

DIAGNOSTIC TOOL

chosen most by the PRO’s.

code descriptions

+ Next Step ser vice & repair for engines, ABS and Eaton Fuller transmissions

JPRO® Professional D i a g n o s t i c To o l b o x

NRS263025-NS

Already have a computer?

Only need software?

JPRO Professional Diagnostic Software & Adapter Kit

JPRO Professional Diagnostic Software

w/ Next Step

NRS232125-NS

JPRO is a registered trademark of Noregon Systems, Inc. Picture for illustration purposes only. ©2016 Noregon Systems, Inc. All rights reserved.

w/ Next Step

NRS212100-NS

Proudly offering the Panasonic Toughbook® CF-53 in JPRO® Professional Diagnostic Toolbox

95


2016

PRESORTED STANDARD U.S. POSTAGE PAID PERMIT #75 LAKELAND, FL

SPRING SUMMER OMEHW93690C 10 Ton Air Operated End Lift with High Lift 10 Ton Stands

P.O Box 90009 Lakeland, Fl 33804

PREPAID FREIGHT

This advertisement was prepared in advance, therefore merchandise availability is subject to delivery by manufacturers as scheduled. All advertised items are not stocked by all stores. Not responsible for typographical or pictorial errors. Quantities limited. CAUTION: Always wear appropriate safety equipment and observe safety advice and proper use of equipment as instructed in warning and caution labels and operational instructions.

KEN35440 Blue Cobra™ Truck Tire Demount Tool

MOUNTING DEMOUNTIN / G

CDOHDCODEPCAT Class 4-8 HD Truck Coverage for J1587, J1708 and J1939 Protocols

AMMCHD-9551 Coats® Heavy-Duty Tire Changer

• Offers the most automated features and widest range of fittings in the CHD line • Remote-controlled rotating tool head/arm for the fastest, easiest tool changes in the business

96

Profile for David Pentecost

Heavy Duty Spring 2016 Non Priced  

Newest in Heavy Duty Automotive tools and Equipment for Spring 2016

Heavy Duty Spring 2016 Non Priced  

Newest in Heavy Duty Automotive tools and Equipment for Spring 2016

Profile for toolweb