Page 1

A ALUMINIUM PRODUCTS B BOLSTER SYSTEM C CARGO RESTRAINT D DRAWBARS E

FRAME FURNITURE

F

GAS SPRINGS

G HINGES H LIGHTS AND LIGHTING SYSTEMS I

LOCKING DEVICES

J

RUBBER AND PLASTIC PRODUCTS

K SCREWS, NUTS AND RIVETS L

SIGNS AND TAPES

M SLIDING ROOFS AND SIDE CURTAINS N TOOLBOXES O UNDERRUN PROTECTION


TABLE OF CONTENTS A

B

C

ALUMINIUM PRODUCTS: PROFILES 1 Body profiles 2 Drawer profiles 3 Dropside profiles 25 mm 4 Dropside profiles 30 mm 5 Floor profiles 6 Light body profiles 7 Standard profiles 8 Profiles 30-50 mm 9 Steel profiles 10 Subframes

D

DRAWBARS 1 Air operated telescopic drawbars 2 Bolt-on drawbars 3 Drawbar accessories 4 Fixed drawbars

E

FRAME FURNITURE 1 Anti-spray • Mudflap saddles and holders • Mudflaps • TMT-Rensi anti-spray mats

2 3 4 5

BOLSTER SYSTEM 1 Bulkheads 2 Timber bunks 3 Winches and other accessories

Body clamps Body mounting fittings Ladders Mudguard stays • • • •

CARGO RESTRAINTS 1 Cargo keepers 2 Cargo restraint and captive tracks 3 Load restraints

Accessories for stays Flat mudguard stays Tube stays U and V stays

6 Mudguards • • • • • • •

• Bolt-on load restraints • Weld-on load restraints

4 Load straps and tighteners

Three-piece mudguards Parlok ½Supra mudguards Parlok Supra mudguards Parlok White Line mudguards Parlok Flat Top mudguards Tandem mudguards Parlok color mudguards

7 Swap body equipments

• Belt keepers • Load straps • Tighteners

• Container locks • Support legs • Swap body hooks

5 Pole brackets 6 TIR cables and rivet-on staples

8 Wheel chocks and holders

F

2

GAS SPRINGS 1 Gas spring accessories 2 Gas springs


TABLE OF CONTENTS G

HINGES 1 Continuous hinge elements 2 Door hinges 3 Dropside hinges 4 Hinge pins for dropside hinges

H

LIGHTS AND LIGHTING SYSTEMS 1 Fasteners for positions lights 2 Junction boxes and wires 3 Light accessories 4 Light consoles 5 Lights • • • • • • •

Interior lights LED marker lights License plate lamps Multifunctional lights Position lights Rubber arm lights Work lights

J

RUBBER AND PLASTIC PRODUCTS 1 Door seals 2 Rubber and plastic products 3 Rubber corners 4 Seal fastening 5 Sealings

K

SCREWS, NUTS AND RIVETS

L

SIGNS AND TAPES 1 ADR signs 2 Conspicuity tapes 3 Signs and marker boards 4 Special transport

M

SLIDING ROOFS AND SIDE CURTAINS 1 Combiliner 2 Megaliner 3 Sesam components and accessories 4 Side curtain accessories

N

TOOLBOXES 1 Aluminium toolboxes 2 Other toolboxes 3 Spare wheel boxes 4 Stainless steel toolboxes 5 Toolbox support

O

UNDERRUN PROTECTION 1 Rear underrun protection 2 Side protection 3 Underrun protection fasteners

6 P-Light systems 7 Reflectors

I

LOCKING DEVICES 1 Adjustable fasteners 2 Dropside fittings 3 Flat bed accessories 4 Locking devices • • • •

Back door locks Door retainers Other locks Side door locks

5 Locking pillars • • • •

Armaton locking pillars DG locking pillars Kinnegrip locking pillars Minimatic locking devices

Version 5/2018 3


4


A ALUMINIUM PRODUCTS BODY PROFILES A-1 DRAWER PROFILES A-2 DROPSIDE PROFILES 25 MM A-3 DROPSIDE PROFILES 30 MM A-4 FLOOR PROFILES A-5 LIGHT BODY PROFILES A-6 PROFILES 30-50 MM A-7 STANDARD PROFILES A-8 STEEL PROFILES A-9 SUBFRAMES A-10


A-1 №

BODY PROFILES Product name LOWER CORNER SECTION 11620 • Weight: 2,85 kg/m

35100

LOWER CORNER SECTION 11620 • Length: 7,6 m

35101

LOWER CORNER SECTION 11620 AN • Anodized • Length: 7,5 m

35110

LOWER SECTION 376892 • Length: 7,6 m • Weight: 2,64 kg/m

LOWER SECTION 376893 • Length: 7,6 m • Weight: 2,34 kg/m

35102

LOWER SECTION 376893

35122

LOWER SECTION 376893 AN • Anodized

35110

6

35102, 35122


BODY PROFILES №

Product name

35106

LOWER PROFILE 10007 AN • Anodized • Length: 7,1 m • Weight: 2,02 kg/m

35111

LOWER PROFILE 17667 AN • Anodized • Length: 7,1 m • Weight: 2,11 kg/m

LOWER CORNER SECTION 358228 • Length: 7,6 m • Weight: 1,77 kg/m

35280

LOWER CORNER SECTION 358228

35281

LOWER CORNER SECTION 358228 AN • Anodized

7

A-1


A-1 №

BODY PROFILES Product name CORNER SECTION 11411

• Weight: 0,55 kg/m

35115

CORNER SECTION 11411 • Length: 6,2 / 7,5 m

35116

CORNER SECTION 11411, PERFORATED • Length: 6,2 / 7,5 m • Hole spacing: Ø 5 mm / 200 mm

35117

CORNER SECTION 11411 AN • Anodized • Length: 7,5 m

35108

CORNER SECTION 368009 AN • • • •

Suitable lid profile 35104 Anodized Length: 7,5 / 8,6 m Weight: 1,83 kg/m

35104

35113

CORNER SECTION 20030 AN • Anodized • Length: 7,1 m • Weight: 1,73 kg/m

8


BODY PROFILES №

Product name CORNER SECTION 9988 • Length: 7,5 m • Weight: 1,53 kg/m

35120

CORNER SECTION 9988

35121

CORNER SECTION 9988 AN • Anodized

35123

CORNER SECTION 9988 AN, PERFORATED • Hole spacing: Ø 5 mm / 200 mm

CORNER SECTION 9989 • Length: 7,5 m • Weight: 1,05 kg/m

35130

CORNER SECTION 9989

35131

CORNER SECTION 9989 AN • Anodized

35133

CORNER SECTION 9989 AN, PERFORATED • Anodized • Hole spacing: Ø 5 mm / 200 mm

CORNER SECTION 13875 • Length: 7,5 m • Weight: 1,90 kg/m

35135

CORNER SECTION 13875

35136

CORNER SECTION 13875 AN • Anodized

9

A-1


A-1

BODY PROFILES

Product name

35103

LOWER PROFILE 348096 AN • • • •

Suitable lid profile 35104 Anodized Length: 7,5 m Weight: 2,16 kg/m

35104

35107

LOWER PROFILE 355505 AN • • • •

Suitable lid profile 35104 Anodized Length: 6,3 / 7,5 m Weight: 2,27 kg/m

35104

35271

LOWER PROFILE 357936 AN • • • •

Suitable lid profile 35104 Anodized Length: 8,0 / 9,2 m Weight: 2,50 kg/m

35104

35104

LID PROFILE AL 350488 AN • • • •

Suitable for profiles 35103, 35107, 35108 and 35271 Anodized Length: 4,3 m Weight: 0,12 kg/m

10


BODY PROFILES №

Product name

35132

CONNECTING SECTION 15964 AN • Anodized • Length: 6,3 m • Weight: 1,12 kg

35159

DROP PROFILE AN • Anodized • Length: 2,6 m • Weight: 0,99 kg

35182

DROP PROFILE 3086 AN • Anodized • Length: 5,2 m • Weight: 0,22 kg/m

35180

BODY PROFILE 00027 AN, PERFORATED • • • •

Anodized Hole spacing: Ø 5 mm / 100 mm Length: 5,0 m Weight: 0,15 kg/m

• Available also unanodized and unperforated model 35180-R.

35185

SEAL PROFILE 5103 • Length: 6,0 m • Weight: 0,19 kg/m • Suitable seals: Sealings J-5: • 58270 Door seals J-1: • 58266 • 58267 • 58268

35158

58266 58270 58267 58268

COVER PROFILE 17668 AN • Anodized • Length: 6,2 m • Weight: 0,83 kg/m

11

A-1


A-2 №

DRAWER PROFILES Product name

High

Low

DRAWER PROFILES, AN • Anodized • Length: 6,0 m

37501

SIDE SECTION 11167 AN • Weight: 1,67 kg/m

37502

CORNER SECTION 2-288 AN • Weight: 1,39 kg/m

37505

RAIL SECTION 11168 AN • Weight: 1,35 kg/m

37502

37505

12

37501


DRAWER PROFILES №

Product name

37506

SLIDING RAIL 400 MM, PAIR • Length: 400 mm • Weight: 1,35 kg

37508

RAIL SECTION 2,0 M - POLYETHEN • Length: 2,0 m • Weight: 1,35 kg

13

A-2


A-3 №

DROPSIDE PROFILES 25 MM

Product name

25 MM DROPSIDE PROFILES WITH REINFORCED WALLS 33105

UPPER SECTION 374338 AN • Anodized • Length: 7,0 m • Weight: 3,82 kg/m

33133

INTERMEDIATE SECTION 15716 AN • Anodized • Length: 7,5 m • Weight: 3,26 kg/m

33164

LOWER SECTION 378305 AN • • • •

Anodized Length: 7,0 m Weight: 3,65 kg/m Suitable seal 58262 (Sealings J-5)

33105

58262

33133

14

33164


DROPSIDE PROFILES 25 MM №

Product name UPPER SECTION 8703 • Weight: 2,48 kg/m

33100

UPPER SECTION 8703 • Length: 7,6 m

33101

UPPER SECTION 8703 AN • Anodized • Length: 7,5 m

UPPER SECTION 9027 • Weight: 1,33 kg/m

33110

UPPER SECTION 9027 • Length: 7,6 m

33111

UPPER SECTION 9027 AN • Anodized • Length: 7,5 m

INTERMEDIATE SECTION 8706 • Weight: 1,40 kg/m

33140

INTERMEDIATE SECTION 8706 • Length: 7,6 m

33141

INTERMEDIATE SECTION 8706 AN • Anodized • Lenght: 7,5 m

15

A-3


A-3 №

DROPSIDE PROFILES 25 MM

Product name INTERMEDIATE SECTION 334227 • Weight: 2,02 kg/m

33134

INTERMEDIATE SECTION 334227 • Length: 7,6 m

33135

INTERMEDIATE SECTION 334227 AN • Anodized • Length: 6,3 m

INTERMEDIATE SECTION 8705

33134, 33135

• Weight: 2,53 kg/m

33130

INTERMEDIATE SECTION 8705 • Length: 7,6 m

33131

33130, 33131

INTERMEDIATE SECTION 8705 AN • Anodized • Length: 6,3 / 7,5 m

LOWER SECTION 8704 • Weight: 2,72 kg/m

33160

LOWER SECTION 8704 • Length: 7,6 m

33161

LOWER SECTION 8704 AN • Anodized • Length: 6,3 / 7,5 m

16


DROPSIDE PROFILES 25 MM №

Product name

33165

LOWER SECTION 332332 AN • • • •

Anodized Length: 7,5 m Weight: 3,01 kg/m Suitable seal 58279 (Sealings J-5)

58279

33185

LOWER SECTION 15460 AN • Anodized • Length: 6,3 m • Weight: 2,65 kg/m

17

A-3


A-3

DROPSIDE PROFILES 25 MM

Product name

33171

LOWER SECTION 10117 AN • Anodized • Length: 7,5 m • Weight: 3,33 kg/m Suitable seals (Sealings J-5): • 58276 • 58278

58276 58278

LOWER SECTION 344655 • Weight: 3,11 kg/m Suitable seals (Sealings J-5): • 58276 • 58278

33182

LOWER SECTION 344655 • Length: 7,6 m

33183

LOWER SECTION 344655 AN • Anodized • Length: 6,3 / 7,5 m

33171

18

33182, 33183


DROPSIDE PROFILES 25 MM № 33193

Product name BOARDCONSOLE PROFILE 15386 AN • Anodized • Length: 7,5 m • Weight: 1,95 kg/m

33151

TIR SECTION 8707 AN • Anodized • Length: 7,5 m • Weight: 2,07 kg/m

33193

33151

37125

FRONT WALL PROFILE 23596 AN, PERFORATED • Anodized • Length: 6,6 m • Weight: 2,42 kg/m

19

A-3


A-3 №

DROPSIDE PROFILES 25 MM

Product name END SECTION 4877 • Length: 7,1 m • Weight: 0,54 kg/m

33200

END SECTION 4877

33201

END SECTION 4877 AN • Anodized

END SECTION 9032 • Length: 7,1 m • Weight: 0,63 kg/m

33210

END SECTION 9032

33211

END SECTION 9032 AN • Anodized

END SECTION 12760 • Length: 6,6 m • Weight: 0,75 kg/m Suitable seals (Door seals J-1): • 58258 • 58259 • 58260

33220

END SECTION 12760

33221

END SECTION 12760 AN

58258 58259 58260

• Anodized

20


DROPSIDE PROFILES 25 MM №

Product name END SECTION 12759 • Length: 6,6 m • Weight: 0,84 kg/m Suitable seals: Sealings J-5: • 58276 • 58278 Door seals J-1: • 58266 • 58267 • 58268 • 58269 • 58296

33230

END SECTION 12759

33231

END SECTION 12759 AN

58276 58278 58266 58267 58268 58269 58296

• Anodized

33226

END SECTION 18833 AN • Anodized • Length: 3,6 m • Weight: 1,51 kg/m

21

A-3


A-3

DROPSIDE PROFILES 25 MM

Product name

33225

END SECTION 24597 • Anodized • Length: 7,1 m • Weight: 0,87 kg/m

END SECTION 15200 • Length: 6,6 m • Weight: 0,99 kg/m • Suitable seal 58428 (Door seals J-1)

33227

END SECTION 15200

33228

END SECTION 15200 AN

58428

• Anodized

33229

END SECTION 16071 • Length: 6,6 m • Weight: 0,99 kg/m • Suitable seal 58428 (Door seals J-1)

58428

33241

END SECTION 17559 AN • Anodized • Length: 7,1 m • Weight: 0,89 kg/m

22


DROPSIDE PROFILES 25 MM №

Product name END SECTION 17560 • Length: 7,1 m • Weight: 0,91 kg/m

33245

END SECTION 17560

33246

END SECTION 17560 AN • Anodized

END SECTION 345907 T • Length: 7,1 m • Weight: 0,95 kg/m Suitable seals (Sealings J-5): • 58276 • 58278

33247

END SECTION 345907 T

33248

END SECTION 345907 T AN

58276 58278

• Anodized

END SECTION 35812 • • • •

End section for side protection profiles For K5, K20 and DG locking pillars Length: 7,1 m Weight: 1,02 kg/m

Suitable seals (Sealings J-5): • 58276 • 58278

33275

END SECTION 35812

33276

END SECTION 35812 AN

58276 58278

• Anodized

23

A-3


A-3

DROPSIDE PROFILES 25 MM

Product name

33278

END SECTION K20 41509 AN • • • • • •

33280

End section for side protection profiles For K-20 locking pillar Anodized Length: 7,1 m Weight: 1,50 kg/m Suitable seal 58286 (Sealings J-5)

58286

END SECTION K20 023239 AN • • • • • • •

End section for dropside For K-20 locking pillar Anodized Length: 6,0 m Weight: 1,23 kg/m Suitable seal 58286 (Sealings J-5) Suitable counter piece 23080 (Kinnegrip locking pillars I-5)

58286

23080

33256

CORNER PROFILE 15865 AN • Anodized • Length: 7,1 m • Weight: 1,30 kg/m

24


A-4

DROPSIDE PROFILES 30 MM №

Product name

34101

UPPER SECTION 36064 AN • Anodized • Length: 5 m • Weight: 4,80 kg/m

34105

UPPER SECTION 39742 AN • Anodized • Length: 5 m • Weight: 2,80 kg/m

34107

INTERMEDIATE SECTION 36065 AN • Anodized • Length: 5 m • Weight: 2,00 kg/m

34105

34109

34107

INTERMEDIATE SECTION 36091 AN • Anodized • Length: 5 m • Weight: 2,5 kg/m

34113

INTERMEDIATE SECTION 27042 AN • Anodized • Length: 5 m • Weight: 4,24 kg/m

34109 34113

25


A-4

DROPSIDE PROFILES 30 MM

Product name

34115

LOWER SECTION 36086 AN • Anodized • Length: 5 m • Weight: 2,13 kg/m

34117

LOWER SECTION 36087 AN • Anodized • Length: 5 m • Weight: 2,30 kg/m

34119

34115

END SECTION 36069 AN • Anodized • Length: 5,2 m • Weight: 2,00 kg/m

34121

END SECTION 36076 AN • Anodized • Length: 5,2 m • Weight: 1,83 kg/m

34127

SUPPORT PROFILE 36079 AN • Anodized • Length: 5,2 m • Weight: 3,30 kg/m

26

34117


FLOOR PROFILES №

Product name

37133

FLOOR PROFILE 13496 AN • Anodized • Length: 5,2 m • Weight: 2,59 kg/m

FLOOR PROFILE 349969 • Weight: 2,75 kg/m

37137

FLOOR PROFILE 349969 • Length: 7,5 m

37136

FLOOR PROFILE 349969 AN • Anodized • Length: 5,2 m

37144

FLOOR PROFILE 15690 • Length: 7,5 m • Weight: 5,79 kg/m

37146

FLOOR PROFILE 13551 • Length: 7,5 m • Weight: 4,46 kg/m

37152

FLOOR PROFILE 355358 • Length: 6,8 / 7,5 m • Weight: 3,54 kg/m

27

A-5


A-5

FLOOR PROFILES

Product name

37154

FLOOR PROFILE 18236 • Available in several lengths • Weight: 2,36 kg/m

28


LIGHT BODY PROFILES №

Product name

35172

CORNER PROFILE 13849 AN • • • •

35173

CORNER PROFILE 5780 AN • • • •

35177

Material: polyurethane Color: grey Counter piece for the outer corner piece 35178 Weight: 0,03 kg Suitable for profile 35173

CORNER PIECE 13849 OUTER, MONOVAN • • • • •

35200

Anodized Length: 6,8 / 7,2 m Weight: 0,60 kg/m Compatible corner piece 35177

CORNER PIECE 5780 INNER, MONOVAN • • • • •

35178

Anodized Length: 6,8 / 7,2 m Weight: 1,67 kg/m Compatible corner piece 35178

Material: polyurethane Color: grey Counter piece for the inner corner piece 35177 Weight: 0,12 kg Suitable for profile 35172

LOWER PROFILE MONOVAN 355838 AN • • • •

Anodized Length: 4,7 / 5,3 / 7,2 m Weight: 2,90 kg/m Compatible threshold 35206

35206

29

A-6


A-6

LIGHT BODY PROFILES

Product name

35202

FIXING PROFILE MONOVAN 355839 • Length: 4,6 m • Weight: 0,36 kg/m

35206

THRESHOLD MONOVAN • • • • • •

35290

Material: POM Color: white Measurements: 20 x 30 x 1000 mm Weight: 0,90 kg Suitable for DMG R-16 locking cam 25122 and TMT door locks Suitable for profile 35200

CORNER PROFILE 19805 AN • Anodized • Length: 7,1 m • Weight: 2,75 kg/m

35292

END SECTION 19806 AN • Anodized • Length: 7,1 m • Weight: 0,77 kg/m

30


PROFILES 30-50 MM №

Product name

35119

RECESSED SECTION 24158 AN • Anodized • Length: 7,5 m • Weight: 1,63 kg/m • Compatible lashing track 60121 (Cargo restraints and captive tracks C-2)

60121

END SECTION 11839 • Length: 7,1 m • Weight: 1,14 kg/m Suitable seals (Door seals J-1): • 58258 • 58259 • 58260 • 58269 • 58296

35160

END SECTION 11839

35161

END SECTION 11839 AN

58258 58259 58260 58269 58296

• Anodized

35151

END SECTION 11619 AN • Anodized • Length: 7,1 m • Weight: 1,23 kg/m Suitable seals: Door seals J-1: • 58266 • 58267 • 58268 • 58269 • 58296

58266 58267 58268 58269 58296 58276 58278

Sealings J-5: • 58276 • 58278

31

A-7


A-7 №

PROFILES 30-50 MM Product name DOOR PROFILE 30 MM 24609

• Length: 7,1 m • Weight: 1,02 kg/m • Suitable seal 58277 (Door seals J-1)

35147

DOOR PROFILE 30 MM 24609

35148

DOOR PROFILE 30 MM 24609 AN

58277

• Anodized

35164

DOOR PROFILE 30 MM 24610 AN • Anodized • Length: 7,1 m • Weight: 1,17 kg/m

END SECTION 15809/30 • Length: 7,1 m • Weight: 0,69 kg/m Suitable seals (Door seals J-1): • 58258 • 58259 • 58260 • 58269 • 58296

35170

END SECTION 15809/30

35171

END SECTION 15809/30 AN

58258 58259 58260 58269 58296

• Anodized

32


PROFILES 30-50 MM №

Product name

35153

END SECTION 15566 AN T • Anodized • Length: 7,1 m • Weight: 0,90 kg/m Suitable seals (Door seals J-1): • 58266 • 58267 • 58268

35193

58266 58267 58268

CONNECTING SECTION 23973 AN • Anodized • Length: 7,1 m • Weight: 1,12 kg/m

35225

END SECTION U-50 5101 AN • Anodized • Length: 7,6 m • Weight: 1,65 kg/m Suitable seals: Sealings J-5: • 58270 Door seals J-1: • 58266 • 58267 • 58268

35230

58266 58270 58267 58268

END SECTION 5102 AN • Anodized • Length: 7,6 m • Weight: 1,48 kg/m Suitable seals (Door seals J-1): • 58271 • 58274 • 58275

58271 58274 58275

33

A-7


A-8

STANDARD PROFILES

Product name

37170

U-SECTION 6581/80 X 40 X 5 • Length: 5,0 m • Weight: 2,05 kg/m

37175

U-SECTION 22/50 X 30 X 4 • Length: 6,0 m • Weight: 1,12 kg/m

37370

CORNER PROFILE 30 X 20 X 2 • Length: 5,0 m • Weight: 0,26 kg/m

FLAT BAR 15 X 3 • Weight: 0,12 kg/m

37400

FLAT BAR 15 X 3 • Length: 5,0 m

37401

FLAT BAR 15 X 3, PERFORATED • Length: 5,0 / 6,0 m • Hole spacing: 100 mm

37410

FLAT BAR 25 X 5 • Length: 5,0 m • Weight: 0,34 kg/m

37420

FLAT BAR 40 X 5 • Length: 6,0 m • Weight: 0,54 kg/m

37422

FLAT BAR 60 X 8 • Length: 5,3 m • Weight: 1,3 kg/m

34


STEEL PROFILES №

Product name SIDE RAVE • Material: DOMEX 355 MC • Unprimed • Length: 6,0 m

30106

SIDE RAVE 3 • Weight: 11,0 kg/m

30108

SIDE RAVE 4 • Weight: 13,7 kg/m

30111

30106

SIDE RAVE 6 • Weight: 11,4 kg/m

30113

SIDE RAVE 9 • Weight: 13,3 kg/m

30108

30111

30113

35

A-9


A-9 №

STEEL PROFILES

Product name

SIDEBOARD PILLAR GRP

• Pillars are delivered primed with back plates • Bushing is not included

SIDEBOARD PILLAR GRP-1000 30150

SIDEBOARD PILLAR GRP-1000, SIDE • Weight: 13,8 kg

30160

SIDEBOARD PILLAR GRP-1000, BACK-R/H • Weight: 12,2 kg

30161

SIDEBOARD PILLAR GRP-1000, BACK-L/H • Weight: 12,2 kg

SIDEBOARD PILLAR GRP-1200 • Weight: 16,0 kg

30165

SIDEBOARD PILLAR GRP-1200, SIDE

30166

SIDEBOARD PILLAR GRP-1200, BACK-R/H

30167

SIDEBOARD PILLAR GRP-1200, BACK-L/H

30142

SUPPORT WEDGE GRP-400 • Unprimed • Weight: 2,6 kg

30143

BUSHING GRP-400 • Unprimed • Weight: 2,1 kg

36

SIDE

BACK-R/H


SUBFRAMES №

Product name

37157

MAIN RUNNER 15003 AN • Anodized • Length: 4,7 / 7,5 m • Weight: 3,74 kg/m

37181

MAIN RUNNER 356530 • Length: 4,3 / 5,3 / 6,0 m • Weight: 3,80 kg/m

37188

U-SECTION 342570 • Length: 4,7 / 6,5 / 7,5 m • Weight: 5,82 kg/m

37

A-10


â„–

Product name

38


B BOLSTER SYSTEM BULKHEADS B-1 TIMBER BUNKS B-2 WINCHES AND OTHER ACCESSORIES B-3


B-1 №

BULKHEADS Product name TMT BULKHEAD • • • • •

Bolt kit, supports and support sleeves are included Height: 2925 mm Width: 2504 mm Weight: 209,0 kg Other sizes available on request

75603

TMT BULKHEAD 2925 MM

75613

TMT BULKHEAD WITH RECESS 2925 MM

40


BULKHEADS №

Product name

75605

BULKHEAD SUPPORT SLEEVES • Material: galvanized steel • Weight: 16,2 kg

75605-B BENT BULKHEAD SUPPORT SLEEVES • Material: hot-dip galvanized steel • Weight: 18,0 kg

75616

BULKHEAD SUPPORT • Weight: 22,8 kg

LEFTHANDED SUPPORT

41

B-1


B-1

BULKHEADS

Product name

75608

BRACKET FOR WORK LIGHT ZP • Weight: 0,9 kg Includes: • 2 pcs. bracket for work light Zp (75608-1) • 4 pcs. hexagon screw 10 x 25 ZP (64344) • 4 pcs. Nylock nut M10 Zn (64423)

75609

BRACKET FOR SHOVEL AND BRUSH ZP Weight: 1,2 kg Includes: • 1 pc. bracket for showel/brush, upper (75609-1) • 1 pc. bracket for showel/brush, lower (75609-2) • 2 pcs. plastic plug 105 (58470) • 1 pc. curtain keeper 101/375 (58462) • 2 pcs. socket head cap M6x25 Zn (64362) • 2 pcs. Nylock nut M6 Zn (64416) • 5 pcs. hexagon screw M10x25 Zn (64344) • 5 pcs. Nylock nut M10 Zn (64423)

75614

CRANE TRIPOD ZP • Material: hot-dip galvanized steel • Bolt mounting • Weight: 42,0 kg

42


TIMBER BUNKS №

Product name

TMT-TIMBER TIMBER BUNK

• Utility model protected • Frame height: 160 mm • Clamps are included in the delivery

Materials: • bunk frame and stakes: anodized aluminium • stake fasteners: painted steel

TMT-TIMBER 2600-2800 MM • Stake length: 2600-2800 mm • Weight: 128,0 kg

75036

TMT-TIMBER 2600-2800 MM + FIXED CLAMPS

75037

TMT-TIMBER 2600-2800 MM + SLIDING CLAMPS

75040

TMT-TIMBER 2600-2800 MM + QUICK SNAP CLAMPS

TMT-TIMBER 2850-3250 MM • Stake length: 2850-3250 mm • Weight: 137,0 kg

75038

TMT-TIMBER 2850-3250 MM + FIXED CLAMPS

75039

TMT-TIMBER 28500-3250 MM + SLIDING CLAMPS

75041

TMT-TIMBER 28500-3250 MM + QUICK SNAP CLAMPS

43

B-2


B-2 №

TIMBER BUNKS Product name

75029-5 FRAME COVER, SS • Used to protect the frame when the bunk frame is moved with a grab. • Material: stainless steel • Weight: 4,1 kg

44


TIMBER BUNKS №

B-2

Product name TMT-TIMBER CLAMPS Different frame widths has been considered when designing the clamps. Used components, except lower grabbers, are same between sliding and fixed clamp which makes installation easy. Used materials: • aluminium • steel • stainless steel • POM plastic

FIXED CLAMP

SLIDING CLAMP

45

QUICK SNAP CLAMP


B-3 №

WINCHES AND OTHER ACCESSORIES Product name WINCH 15055-K

• • • • •

For 50 mm wide/12 m long strap Fastening by welding or with bolts (M16, 12.9) 22 mm hole for clamp arm Break/nominal strength: 50 kN/25 kN Weight: 5,0 kg

60403

WINCH 15055-K, PAINTED RAL7024

60403MU

WINCH 15055-K, UNTREATED

60403ZN

• Delivered as components

WINCH 15055-K, GALVANIZED

46


WINCHES AND OTHER ACCESSORIES №

Product name

60405

WINCH 1885-D • Not suitable for preservation of the strap • Breaking strength: 5500 kg • Weight: 5,0 kg

60408

WINCHBAR 785 MM • Extension arm for the winch • Weight: 5,0 kg

75030

QUICK RELEASER • Includes wire • Material: hot-dip galvanized steel • Weight: 2,3 kg

47

B-3


B-3

WINCHES AND OTHER ACCESSORIES

Product name

75031

CHAIN HOLDER • • • • • •

Includes rack for lifting hook Lifting hook is sold separately Handedness can be changed Material: hot-dip galvanized steel Bolt fastening Weight: 3,0 kg

75031-3 LIFTING HOOK • Material: elastomer • Frost resistance: -40 °C • Weight: 0,2 kg

48


C CARGO RESTRAINT CARGO KEEPERS C-1 CARGO RESTRAINT AND CAPTIVE TRACKS C-2 LOAD RESTRAINTS C-3 LOAD STRAPS AND TIGHTENERS C-4 POLE BRACKETS C-5 TIR CABLES AND RIVET-ON STAPLES C-6


C-1

CARGO KEEPERS

Product name

60078

CARGO KEEPER TRAKO • • • • • •

Gas spring assisted tightening Can be mounted both vertically and horizontally Hinged feet Length: 2350-3350 mm Material: steel, aluminium Weight: 8,5 kg

60078-1 GAS SPRING FOR CARGO KEEPER 60078 • Weight: 0,3 kg

60078-2 SHOE FOR CARGO KEEPER • Weight: 0,3 kg

LOADLOK CARGO KEEPER 1867 • Pipe: Ø 38 mm • Material: steel, aluminium

60080

CARGO KEEPER 1867-WS

60080-1

• Length: 2350-2720 mm • Weight: 4,0 kg

60082

CARGO KEEPER 1867-WS-EL

60080-2

• Length: 2565-2935 mm • Weight: 4,5 kg

60080-1 HANDLE FOR CARGO KEEPER 1867 • Weight: 0,3 kg

60080-2 SHOE FOR CARGO KEEPER 1867 • Weight: 0,4 kg

60080, 60082

50


CARGO KEEPERS №

Product name

60083

LOADLOK ERGO CARGO KEEPER 2,3-2,8M • • • •

Length: 2300-2800 mm Pipe: 40x40 mm Material: steel, aluminium Weight: 4,0 kg

LOADLOK DECKING BRACKET • Weight: 0,4 kg Suitable for tracks (Cargo restraint and captive tracks C-2): • 60116 • 60117 • 60121

60084

DECKING BRACKET 1845

60085

DECKING BRACKET 1844

60084

60085

60116 60117 60121

51

C-1


C-1

CARGO KEEPERS

Product name

60095

LOADLOK CARGO-PLANK 1850 ALU • • • • • •

Adjustable length Material: aluminium Height: 125 mm Width: 30 mm Length: 2400-2700 mm Weight: 9,5 kg

LOADLOK DECKING BEAM 1841 • Material: aluminium • Length: 2380-2690 mm Suitable for tracks (Cargo restraint and captive tracks C-2): • 60113 • 60114

60113 60114

60098

LOADLOK DECKING BEAM 1841 • Allowed load perpendicular to the beam: 1000 kg • Weight: 7,5 kg

60108

LOADLOK DECKING BEAM 1841 HD • Allowed load perpendicular to the beam: 1350 kg • Weight: 9,1 kg

60098, 60108

52


CARGO KEEPERS №

Product name LOADLOK SHORING POLE • Material: galvanized steel

60090

SHORING POLE 1818 • • • • •

60092

SHORING POLE 1818-EL • • • • •

60094

Length: 2085-2485 mm Outer diameter: 45 mm Cargo space width: 2000-2400 mm Carrying capacity: 450 kg Weight: 9,5 kg

SHORING POLE 1811-EL • • • • •

60097

Length: 2590 mm Outer diameter: 42 mm Cargo space width: 2460-2560 mm Carrying capacity: 375 kg Weight: 8,0 kg

SHORING POLE 1811 • • • • •

60096

Length: 2505 mm Outer diameter: 42 mm Cargo space width: 2380-2480 mm Carrying capacity: 375 kg Weight: 8,0 kg

Length: 2445-2845 mm Outer diameter: 45 mm Cargo space width: 2360-2760 mm Carrying capacity: 450 kg Weight: 10,0 kg

SHORING POLE 1812-HD • • • • •

Length: 2345-2680 mm Outer diameter: 50 mm Cargo space width: 2250-2650 mm Carrying capacity: 675 kg Weight: 10,1 kg

53

C-1


C-2 №

CARGO RESTRAINT AND CAPTIVE TRACKS Product name LASHING TRACK • • • •

Recessed track for sliding lashing points Also available with pre-machined holes Material: anodized aluminium Length: 7,6 m

• Compatible sliding lashing points 60052 and 60055 (Bolt-on load restraints C-2)

60051

60052 60055

LASHING TRACK 5830 AN • Weight: 3,81 kg/m

60053

60051

LASHING TRACK 5831 AN • Weight: 3,42 kg/m

60053

60100

LASHING TRACK 25/5000 AL • Length: 5,0 m • Material: aluminium • Weight: 0,71 kg/m

60107

END CAP FOR TRACK 60100 • • • •

Material: plastic Color: grey Weight: 0,01 kg Suitable for track 60100

54


CARGO RESTRAINT AND CAPTIVE TRACKS №

Product name

60101

LASHING TRACK 20/4000 AL • • • • •

60103

LASHING TRACK 25/4000 • • • • •

6010366

60104

Recessed lashing track, mounting depth 20 mm Holes for water drainage, hole spacing 800 mm Material: anodized aluminium Length: 4,0 m Weight: 1,40 kg/m

Compatible end cap 60104 Breaking strength: 1,5 kN Material: electrogalvanized steel Length: 4,0 m Weight: 1,54 kg/m

60104

LASHING TRACK 25/3000-66 • Material: galvanized steel • Length: 3,0 m • Weight: 1,54 kg/m

END CAP FOR TRACK 60103 • Material: electrogalvanized steel • Weight: 0,05 kg • Suitable for track 60103

55

C-2


C-2

CARGO RESTRAINT AND CAPTIVE TRACKS

Product name

60113

CAPTIVE TRACK LL 5050, SINGLE • • • •

60114

CAPTIVE TRACK LL 5052, DOUBLE • • • •

60121

Material: anodized aluminium Length: 1,96 m Weight: 2,07 kg Suitable for decking beams 60098 and 60108

Material: anodized aluminium Length: 1,96 m Weight: 4,31 kg Suitable for decking beams 60098 and 60108

HD FLAT TRACK 3008/3 M, HORIZONTAL • Length: 3,00 m • Weight: 6,50 kg

56


CARGO RESTRAINT AND CAPTIVE TRACKS №

Product name COMBI TRACK 3009 • Material: galvanized steel • Length: 3,0 m

60116

COMBI TRACK 3009, HORIZONTAL • Compatible end cap 60105 • Weight: 7,90 kg

60117

60105

COMBI TRACK 3009, VERTICAL • Weight: 5,10 kg

60116

60117

60105

END CAP FOR TRACK TYPE 3008/3009 • • • •

Material: plastic Color: grey Weight: 0,01 kg Suitable for track 60116

57

C-2


C-3 №

BOLT-ON LOAD RESTRAINTS Product name LASHING RING U-80, BOLT-ON

• Break/nominal strength 40 kN/20 kN • Bolt mounting or/and weld attachment • Weight: 0,28 kg

60131

LASHING RING U-80 ZP • Material: electrogalvanized steel

60131RST

LASHING RING U-80 SS • Material: stainless steel

LASHING RING D-80 • • • •

60132

Break/nominal strength 40 kN/20 kN Bolt mounting or/and weld attachment Material: electrogalvanized steel Weight: 0,37 kg

LASHING RING D-80

60132- ROUND LASHING RING D-80 PYÖREÄ

60132PYÖREÄ

60132

58


BOLT-ON LOAD RESTRAINTS №

Product name SLIDING LASHING POINT • Break/nominal strength 40 kN/20 kN • Suitable for lashing tracks 60051 and 60053 • Weight: 0,20 kg

60051 60052

SLIDING LASHING POINT

60055

SLIDING LASHING POINT WITH D-RING

60052

60134

60055

LASHING RING A-50 SS • Break/nominal strength 16 kN / 8 kN • Material: stainless steel • Weight: 0,15 kg

60136

LASHING RING CH ZP • • • •

Break/nominal strength 20 kN/10 kN Bolt mounting, tightening torque 25 Nm Material: hot-dip galvanized steel Weight: 0,37 kg

59

60053

C-3


C-3

BOLT-ON LOAD RESTRAINTS

Product name

60137

ROPE RING 202 • Break/nominal strength 12 kN/6 kN • Material: electrogalvanized steel • Weight: 0,22 kg

60139

ROPE RING 304 • Break/nominal strength 18 kN/9 kN • Material: electrogalvanized steel • Weight: 0,18 kg

60149

HOOK 12 ZP • Material: electrogalvanized steel • Hole: Ø 8 mm • Weight: 0,01 kg

60153

CHAIN LOOP 504/21 • Mounting depth: 21 mm • Primed • Weight: 0,40 kg

60154

CHAIN LOOP 504/25 ZP • Mounting depth: 25 mm • Material: hot-dip galvanized steel • Weight: 0,43 kg

60


BOLT-ON LOAD RESTRAINTS №

Product name

60165

LASHING POINT B-125 ZP • • • •

60169

LASHING RING O-95 ZP • • • •

60175

Break/nominal strength 16 kN/8 kN Bolt mounting, spring-loaded Material: hot-dip galvanized steel Weight: 0,38 kg

Break/nominal strength 16 kN/8 kN Bolt mounting, spring-loaded Material: hot-dip galvanized steel Weight: 0,38 kg

SECURING HOOK 8T • Break/nominal strength 80 kN/40 kN • Material: untreated steel • Weight: 0,70 kg

60176

LASHING RING WITH BOLT • • • •

Break/nominal strength 40 kN/20 kN Material: hot-dip galvanized steel Includes M12x50 bolt Weight: 0,44 kg

61

C-3


C-3

WELD-ON RESTRAINTS

Product name

60119

LASHING RING R-45 • Material: untreated steel • Break/nominal strength 40 kN/20 kN • Weight: 0,70 kg

60122

LASHING RING R-125 • Material: untreated steel • Break/nominal strength 40 kN/20 kN • Weight: 0,90 kg

60124

LASHING RING 3,5 T • • • •

60125

Break/nominal strength 70 kN/ 35 kN Direct pull 90 kN Angular pull (60°) 78 kN Weight: 1,10 kg

LASHING RING K-75 • Break/nominal strength 40 kN/20 kN • Weight: 0,80 kg

62


WELD-ON RESTRAINTS №

Product name

60129

LASHING RING K-45 • Break/nominal strength 40 kN/20 kN • Weight: 0,65 kg

60130

LASHING RING K-100 • Break/nominal strength 70 kN/35 kN • Weight: 1,50 kg

60130-2 D-RING K-100 • Used in product 60130 • Weight: 0,30 kg

60130-3 BAND 90° K-100 • • • •

Used in product 60130 Untreated Width: 50 mm Weight: 0,05 kg

60130-5 BAND 180° K-100 • • • •

Used product 60130 Untreated Width: 50 mm Weight: 0,06 kg

63

C-3


C-3 №

WELD-ON RESTRAINTS Product name LASHING RING U-80

• Break/nominal strength 40 kN/20 kN • Weight: 0,28 kg

60133

LASHING RING U-80 • Untreated

60133RST

LASHING RING U-80 SS • Material: stainless steel

60133-2 D-RING U-80 • Used in product 60133 • Untreated • Weight: 0,30 kg

60133

60133-3 BAND 90° U-80 • • • •

Used in product 60133 Untreated Width: 30 mm Weight: 0,05 kg

60133-5 BAND 180° U-80 • • • •

Used in product 60133 Untreated Width: 30 mm Weight: 0,06 kg

60133-RST

64


WELD-ON RESTRAINTS №

Product name

60145

HOOK 12 • Untreated • Weight: 0,04 kg

60150

HOOK, CASTED • Untreated • Weight: 0,07 kg

60162

LASHING HOOK KG 65-03 • Break/nominal strength 60 kN/30 kN • Untreated • Weight: 0,33 kg

60164

LASHING HOOK KG 605 • Enclosed turning hook • Break/nominal strength 60 kN/30 kN • Weight: 1,12 kg

60166

LASHING HOOK 4T • Enclosed turning hook • Break/nominal strength 80 kN/40 kN • Weight: 1,28 kg

65

C-3


C-3

WELD-ON RESTRAINTS

Product name

60170

FERRY RING 12 T • Break/nominal strength 240 kN/120 kN • Is delivered with weldable band • Weight: 1,35 kg

60172

LASHING RING V-90 • Break/nominal strength 40 kN/20 kN • Untreated • Weight: 1,00 kg

60174

LASHING RING • Break/nominal strength 58 kN/29 kN • Untreated • Weight: 1,00 kg

66


LOAD STRAPS AND TIGHTENERS №

Product name

LOADLOK LASHING STRAPS LASHING STRAP WITH D-RING, 12 M • Length: 12 m • Width: 50 mm • Lashing strength LC=daN

60211

LASHING STRAP, 12 M - 1600 DAN • Breaking strength: 4000 kg • Weight: 1,2 kg

60212

60211, 60212

LASHING STRAP, 12 M - 2000 DAN • Breaking strength: 5000 kg • Weight: 1,4 kg

60216

LASHING STRAP, 12 M - 1600 DAN • Breaking strength: 4000 kg • Weight: 1,2 kg

60216

60213

LASHING STRAP WITH TENSIONER AND HOOKS, 10 M • • • • •

Length: 10 m Width: 75 mm Lashing strength LC=4500 daN Breaking strength: 10 000 kg Weight: 7,5 kg

67

C-4


C-4

LOAD STRAPS AND TIGHTENERS

Product name

60214

LASHING STRAP WITH TENSIONER AND HOOKS, 9 M - 4000 KG • • • • •

60215

LASHING STRAP WITH TENSIONER AND HOOKS, 9 M - 5000 KG • • • • •

60054

Length: 9 m Width: 50 mm Lashing strength LC=1600 daN Breaking strength: 4000 kg Weight: 2,4 kg

Length: 9 m Width: 50 mm Lashing strength LC=1600 daN Breaking strength: 5000 kg Weight: 3,3 kg

LASHING STRAP WITH HOOK, 0,4 M • • • • •

Band width: 50 mm Length: 0,4 m Lashing strength LC= 1600 daN Breaking strength: 4000 kg Weight: 0,3 kg

68


LOAD STRAPS AND TIGHTENERS №

Product name

60180

STAND FOR PALLET TRUCK • Bolt mounting • Material: galvanized steel • Weight: 0,7 kg

60182

STRAP HOLDER, SS • Bolt mounting • Material: stainless steel • Weight: 0,31 kg

60350

BELT KEEPER BAND I • • • • •

60351

SECURING PLATE BAND I • • • •

60356

Material: plastic Size: 36 x 263 x 1 mm Weight: 0,10 kg Spare part for belt keeper 60350

CORNER BRACKET FOR BELT KEEPER • • • • •

60360

Size: 87 x 315 mm Embedded mounting, depth 20 mm Mounting hole size: 275 x 27 mm Material: stainless steel Weight: 0,43 kg

Surface-mounting Material: galvanized steel Size: 80 x 300 x 53 mm Weight: 0,55 kg Suitable for product 60350

BELTSPADE WITH HOOK BAND I • Includes plate 60361 • Handle diameter 25 mm • Weight: 0,26 kg

69

C-4


C-4

LOAD STRAPS AND TIGHTENERS

Product name

60361

PLATE FOR BELTSPADE BAND I • Spare part for beltspade 60360 • Material: plastic • Weight: 0,10 kg

60362

ARM FOR BELTSPADE BAND I • • • •

60363

KEEPER FOR BELTSPADE BAND I • • • •

60365

Length: 2000 mm, Ø 25 mm Material: aluminium Weight: 0,56 kg Suitable for product 60360

Material: painted steel Size: 600 x 30 mm Weight: 1,00 kg Suitable for product 60362

BELT KEEPER BAND II • Material: anodized aluminium • Length: 4,1 m • Weight: 0,56 kg Suitable for profiles (Body profiles A-1): • 35115 • 35116 • 35117

60370

35115 35116 35117

STRAP HOLDER • Includes spring and holder • Weight: 0,20 kg

70


POLE BRACKETS №

Product name

60140

POLE BRACKET Ø 63 /140 MM • Welding attachment • Material: untreated steel • Weight: 2,1 kg

60141

LOCK FOR POLE BRACKET • Easy to open without tools • Material: galvanized steel • Weight: 0,2 kg

POLE • Bolts, nuts and the inner part are included in delivery • Material: aluminium

60146

POLE 1750 • Weight: 9,8 kg

60147

POLE 2000 • Weight: 11,1 kg

71

C-4


C-6

TIR CABLES AND RIVET-ON STAPLES

Product name

65200

TIR WIRE Ø 6 MM • Packaging size: 500 m • Weight: 0,03 kg/m

65202

WIRE-END SET FOR TIR WIRE 6 MM • Weight: 0,01 kg

65203

TOOL FOR TIR WIRE-END SET 6MM • Suitable for 6 mm wire • Weight: 0,95 kg

65208

RIVET-ON STAPLE COMBI 38/30 • • • •

65210

RIVET-ON STAPLE 68/25 • • • •

65212

Inner height: 30 mm Fastening hole spacing: 55 mm Material: galvanized steel Weight: 0,04 kg

Inner height: 25 mm Fastening hole spacing: 51 mm Material: galvanized steel Weight: 0,03 kg

RIVET-ON STAPLE 40/20 • • • •

Inner height: 20 mm Fastening hole spacing: 51 mm Material: galvanized steel Weight: 0,03 kg

72


TIR CABLES AND RIVET-ON STAPLES №

Product name

65213

RIVET-ON STAPLE 40/25 • • • •

65214

RIVET-ON STAPLE 40/32 • • • •

65215

Inner height: 45 mm Fastening hole spacing: 30 mm Material: galvanized steel Weight: 0,04 kg

RIVET-ON STAPLE 42/25 • • • •

65219

Inner height: 19 mm Fastening hole spacing: 51 mm Material: galvanized steel Weight: 0,04 kg

RIVET-ON STAPLE 42/45 • • • •

65217

Inner height: 32 mm Fastening hole spacing: 51 mm Material: galvanized steel Weight: 0,04 kg

TURNABLE RIVET-ON STAPLE • • • •

65216

Inner height: 25 mm Fastening hole spacing: 51 mm Material: galvanized steel Weight: 0,04 kg

Inner height: 25 mm Fastening hole spacing: 30 mm Material: galvanized steel Weight: 0,04 kg

EYE BOLT M8 ZP • Weight: 0,02 kg

73

C-6


â„–

Product name

74


D DRAWBARS AIR OPERATED TELESCOPIC DRAWBARS D-1 BOLT-ON DRAWBARS D-2 DRAWBAR ACCESSORIES D-3 FIXED DRAWBARS D-4


D-1

AIR OPERATED TELESCOPIC DRAWBARS

Product name

17237

DRAWBAR TRAKO 2008, 179 KN • • • •

D-value 179 kN Approved according to E4-55R Minimum length � 1600 mm Weight: 160 kg

The drawbar can be supplied with two types of mounting: • bushing for 32 mm bolt • tapered bushings for 51 mm axle, type Briab • Width between fixing centres c/c = 700 - 1300 mm • Inform the c/c measurement when placing the order. • Drawbars are delivired without finishing.

Front axle 10 t 18 t Trako № 0620-00 0620-01 0620-02 0620-03 0620-05 0620-07 0620-10 0620-11 0620-12 0620-13 0620-14 0620-99

C max 2800

C+T max 4000

1500

4000 C max 1000 1500 2000 2800

Additional hole Triangle Bar L=1500 Bar L=2000 Bar L=2500 Bar L=3000 Bar L=3500 Sign

76


AIR OPERATED TELESCOPIC DRAWBARS №

Product name

17278

DRAWBAR TRAKO K-2015, 155 KN • D-value 155 kN • Approved according to E4-55R • Weight: 400 kg Values: • DC= 155 kN • S = 1000 kg • V = 95 kN • Drawbars are delivired without finishing.

17254

DRAWBAR TRAKO DK-2006, 179 KN • • • •

D-value 179 kN (Dolly) Approved according to E4-55R Air operated drawbar for twinaxial center-axle trailer (Dolly) Weight: 300 kg

Values: • Dc=135 kN • S=1000 kg • V=max 95 kN E.g: • V-value 85 kN = overhang of the bar 1100 mm • V-value 43 kN = overhang of the bar 1900 mm (18 t dolly)

Trako № 0660-00 0660-99

DK-2006 for 20 t trailer Sign

77

D -1


D-1

AIR OPERATED TELESCOPIC DRAWBARS

Product name

17258

DRAWBAR TRAKO 2011, 179 KN • D-value 179 kN • Approved according to E4-55R • Weight: 200 kg The drawbar can be supplied with two types of mounting: • bushing for 32 mm bolt • tapered bushings for 51 mm axle, type Briab • Tmin=1000 mm • Min C+T = 1200 mm (if the wagon structures allow it) • Max C+T = 4800 mm • Width between fixing centres c/c = 700 - 1300 mm • Drawbars are delivired without finishing.

Front axle 11 t 18 t

C max 3600 2950

C+T max 4800 4800

Trako № 0611-00 0611-01 0611-02 0611-03 0611-04 0611-05 0611-09

Triangle

0611-10 0611-11 0611-12 0611-13 0611-14 0611-50 0611-51 0611-55 0611-99

Three-hole bar 1000 Three-hole bar 2000 Three-hole bar 2500 Three-hole bar 3000 Three-hole bar 3600 Additional hole Repair kit for 2008-B/2011/2015, product number: 17236 Also available in a short triangle for an additional fee Sign

C max 1000 1500 2000 2500 3000 3600

78


AIR OPERATED TELESCOPIC DRAWBARS №

Product name

17262

DRAWBAR TRAKO 2011-X, 152 KN • • • • • •

D-value 152 kN Compressed air operated automatic drawbar Approved according to E4-55R for 11 t front axle Mounted on the front of the inside Installation with cylindrical sleeve 32 mm bolts Weight: 175 kg

• Width between fixing centres c/c = 700 - 980 mm • Drawbars are delivired without finishing.

Trako № 0613-00 0613-01 0613-02 0613-03 0613-99

C max

C+T max

4000

4500

Bar C=3600 Bar C=2500 Triangle Sign

79

D -1


D-1 №

AIR OPERATED TELESCOPIC DRAWBARS Product name

DRAWBAR TRAKO 2015 • Approved according to E4-55R • Weight: 260 kg The drawbar can be supplied with two types of mounting: • bushing for 32 mm bolt • tapered bushings for 51 mm axle, type Briab • Width between fixing centres c/c = 980 - 1300 mm • Inform the c/c measurement when placing the order. • Drawbars are delivired without finishing.

17270

DRAWBAR TRAKO 2015, 200 KN • D-value 200 kN • Note! With Rockinger 50 mm HD or 57 mm drawbar eye

Trako № 0615-00 0615-01 0615-02 0615-03 0615-50 0615-99

17271

Three-hole bar C=1000 Three-hole bar C=1800 Triangle Additional hole Sign

DRAWBAR TRAKO 2015, 190 KN • D-value 190 kN • Note! Only with 50 mm drawbar eye

Trako № 0615-00

C max

C+T max

1800

4500

80

C max

C+T max

1800

4500


AIR OPERATED TELESCOPIC DRAWBARS №

Product name

17280

DRAWBAR TRAKO 2018, 179 KN • D-value: 179 kN • Approved according to E4-55R • Weight: 300 kg The drawbar can be supplied with two types of mounting: • bushing for 32 mm bolt • tapered bushings for 51 mm axle, type Briab • Max C = 4000 mm • Max C+T = 5450 mm • Width between fixing centres c/c = 700 - 1300 mm • Inform the c/c measurement when placing the order. • Drawbars are delivired without finishing.

81

D -1


D-2

BOLT-ON DRAWBARS

Product name

17195

DRAWBAR TRAKO 2005, 179 KN • D-value 179 kN • Approved according to E4-55R • Weight: 100 kg The drawbar can be supplied with two types of mounting: • bushings for 32 mm bolt • tapered bushings for 51 mm axle, type Briab • Width between fixing centres c/c = 900 - 920 - 1050 - 1100 - 1200 - 1300 mm • Inform the c/c measurement when placing the order. • Drawbars are delivired without finishing.

Trako № 0600-00 0600-01 0600-02 0600-03 0600-04 0600-05 0600-06 0600-07 0600-08 0600-10 060010-G 0600-11 0600-50 0600-99

T

Bar

1200 1300 1400 1450 1500 1600 1700 1950 2150 Bar Bar, galvanized Triangle Bolt kit Sign

1030 1030 1030 1030 1030 1030 1030 1030 1030

C+T 1500-2250 1600-2350 1700-2450 1750-2500 1800-2550 1900-2650 2000-2750 2250-3000 2450-3200 17196

82


BOLT-ON DRAWBARS №

Product name

17202

DRAWBAR TRAKO 2004, 152/175 KN • D-value: 152/175 kN • Approved according to E4-55R • Weight: 180 kg The drawbar can be supplied with two types of mounting: • bushings for 32 mm bolt • tapered bushings for 51 mm axle, type Briab • Max C + T [175 kN] = 4200 mm • Max C + T [151 kN] = 4600 mm • Max C = 3900 mm (-500 mm) • Width between fixing centres c/c = 700 - 900 - 920 - 1100 - 1200 mm • Inform the c/c measurement when placing the order. • Drawbars are delivired without finishing.

Trako № 0680-00 Drawbar 0680-01 Drawbar 0680-02 Drawbar 0680-03 Drawbar 0680-04 Drawbar 0680-05 Drawbar 0680-06 Drawbar 0680-07 Drawbar 0680-08 Drawbar 0680-09 Drawbar 0680-10 Drawbar 0680-11 Drawbar 0680-12 Drawbar 0680-13 Drawbar 0680-30 Bolt kit 2004/2007 0680-33 Bar C-1000 0680-36 Bar C-1500 0680-39 Bar C-2000 0680-42 Bar C-2500 0680-45 Bar C-3000 0680-46 Triangle 2004 0680-47 Bar C-3500 0680-99 Sign Additional fee from triangle smaller than 1000 mm

C max

D max

C+T max

1000 1000 1000 1000 1500 1500 2000 2000 2000 2000 2500 2500 3000 3500

175 175 152 175 175 152 175 152 175 152 175 152 175 152

3000 3500 4600 4200 3500 4600 3500 3500 4200 4600 4200 4600 4200 4600

83

D-2


D-2

BOLT-ON DRAWBARS

Product name

17235

DRAWBAR TRAKO 2007, 152/179 KN • D-value: 152/179 kN • Weight: 150 kg • Width between fixing centres c/c = 700 - 1300 mm

Trako № 0690-00 0690-01 0690-02 0690-03 0690-10 0690-11 0690-12 0690-13 0690-20 0690-99

17256

T

D max

C+T

179 179 179 152

1800-2600 2600-3400 3400-4200 4200-5000

1500 1500 1500 1500 Bar L=1300 incl. drawbar eye Bar L=2100 incl. drawbar eye Bar L=3000 incl. drawbar eye Bar L=3700 incl. drawbar eye Triangle 2007 Sign

DRAWBAR TRAKO 2010, 152 KN • • • • • • •

D-value 152 kN on 10 t front axle Approved according to E4-55R Draw lendth 3000–4300 mm Length adjustment of the bar between 100 mm Lowered bar Suitable for triaxial demountable trailer Weight: 200 kg

• Width between fixing centres c/c = 980 - 1200 mm • Inform the c/c measurement when placing the order. • Drawbars are delivired without finishing.

Trako № 0610-00 0610-01 0610-02 0610-03 0610-50 0610-99

Trako 2010 10 t front axle Trako 2010 lift Trako 2010 bar, includes bolt kit Rear part of the triangle Bolt kit Sign

84

C

T

400-1700

2600 17257


BOLT-ON DRAWBARS №

Product name DRAWBAR TRAKO 2012 • Width between fixing centres c/c = 980 - 1200 mm • Weight: 200 kg

17260

DRAWBAR TRAKO 2012, 200 KN • D-value: 200 kN • Note! With Rockinger 50 mm HD or 57 mm drawbar eye

Trako № 0612-00 0612-01 0612-03 0612-10 0612-50 0612-99

17261

C max

C+T max

900 1500

3500 4100

Triangle Bar with bolt kit Bolt kit Sign

DRAWBAR TRAKO 2012, 190 KN • D-value: 190 kN • Note! Only with 50 mm drawbar eye

Trako № 0612-00-190 0612-01-190

C max

C+T max

900 1500

3500 4100

85

D-2


D-2

BOLT-ON DRAWBARS

Product name

17264

DRAWBAR TRAKO 2013, 179 KN • D-value 179 kN • Approved according to E4-55R • Weight: 120 kg The drawbar can be supplied with two types of mounting: • bushings for 32 mm bolt • tapered bushings for 51 mm axle, type Briab • Width between fixing centres c/c = 900 - 920 - 980 - 1050 - 1100 - 1200 - 1300 mm • Inform the c/c measurement when placing the order. • Drawbars are delivired without finishing.

Trako № 0603-00 0603-01 0603-02 0603-04 0603-05 0603-06 0603-07 0603-08 0603-10 0603-10-G 0603-11 0603-50 0603-99

T

Bar

1200 1300 1400 1500 1600 1700 1900 2100 Bar with bolt kit Bar, galvanized with bolt kit Triangle Bolt kit Sign

1400 1400 1400 1400 1400 1400 1400 1400

86

C+T 1500-2600 1600-2700 1700-2800 1800-2900 1900-3000 2000-3100 2250-3300 2450-3500


BOLT-ON DRAWBARS №

Product name

17266

DRAWBAR TRAKO 2014, 179 KN • D-value: 179 kN • Approved according to E4-55R • Weight: 200 kg Lengths options: • 2500-3200 • 2700-3400 • Width between fixing centres c/c = 980 - 1200 mm • Drawbars are delivired without finishing.

Trako № 0614-00 0610-01 0614-02 0614-03 0614-50 0614-99

17274

C+T Bar 2014 Lift 2014 Bar with bolt kit Rear part of the triangle Bolt kit Sign

2500-3400

DRAWBAR TRAKO 2016, 190 KN • • • • •

D-value: 190 kN Approved according to E4-55R Short triangle (1000 mm) and long bar Note! With Rockinger 50 mm HD or 57 mm drawbar eye Weight: 200 kg

The drawbar can be supplied with two types of mounting: • bushings for 32 mm bolt • tapered bushings for 51 mm axle, type Briab • Width between fixing centres c/c = 980 - 1300 mm

Trako № 0616-00 0616-99

Trako 2016 Sign

C max

C+T max

3200

4200

87

D-2


D-3 №

DRAWBAR ACCESSORIES

Product name BRAKE CRANK 619 • Movement range: 200 mm

17100

BRAKE CRANK 619, FIXED HANDLE • Weight: 2,7 kg

17102

17100

BRAKE CRANK 619, TURNABLE HANDLE • Weight: 3,0 kg

17100, 17102

17101

ROPE PULLEY • • • •

Material: steel Finishing: primed Pulley: Ø 80 mm Weight: 0,65 kg

SPRING FOR DRAWBAR 17104

SPRING 10 X 50 X 350 MM • Measurements: 10 x 50 x 350 mm • Weight: 2,5 kg

17105

SPRING 9 X 55 X 580 MM • Measurements: 9 x 55 x 580 mm • Weight: 4,5 kg

88

17102


DRAWBAR ACCESSORIES №

Product name BEAM FOR DRAWBAR 2005 • Weight: 100,0 kg

17196

BEAM FOR DRAWBAR 2005, 50 MM LOOP

17198

BEAM FOR DRAWBAR 2005, 57 MM LOOP

17236

REPAIR KIT FOR PNEUMATIC DRAWBAR 2011/2008 B • Trako code: 07-0611-51 • Weight: 6,5 kg

17240

BUSHING FOR DRAWBAR Ø 32/63,5 • Trako code: 10-8304-00 • Weight: 0,6 kg

17241

BOLT KIT FOR 32 MM FASTENING • Trako code: 10-0197-00 • Weight: 0,6 kg Kit includes: • 2 pcs. bolt • 2 pcs. nut • 2 pcs. washer

17243

REPAIR KIT FOR PNEUMATIC DRAWBAR 2003/2008 • Trako code: 07-0650-51 • Weight: 6,5 kg

89

D-3


D-3

DRAWBAR ACCESSORIES

Product name

17244

BRONZE BUSHING FOR DRAWBAR LOCKING • Trako code: 10-0670-09 • Weight: 0,2 kg

17245

LOCKING PIN FOR PNEUMATIC DRAWBAR • Trako code: 10-0640-08 • Weight: 4,4 kg

17247

LOCKING PIN FOR DRAWBAR -95 • Weight: 4,4 kg

17248

REPAIR KIT FOR PNEUMATIC DRAWBAR -95 • Trako code: 10-0640-52 • Weight: 6,5 kg

17250

ADJUSTMENT GEAR FOR TRAKO DRAWBAR • • • • • • • •

17251

Tested and approved on 18-ton front axle D value of 171 kN Approval No e5*94/20*94/20*0004*00 Lifts pull tang and gate in the two-step Operated by compressed air Easy installation Suitable for drawbar 17195 Weight: 54,0 kg

MAINTENANCE KIT FOR ADJUSTMENT GEAR 2008-> • Trako code: 10-0645-55 • Weight: 6,5 kg

172511

AIR CYLINDER 300 FOR ADJUSTMENT GEAR • Weight: -

90


DRAWBAR ACCESSORIES №

Product name

17255

VALVE 07107900 • Trako code: 12-07-107900 • Weight: 1,0 kg

17257

LIFT FOR DRAWBAR 2010 - 2014 • Trako code: 07-0610-01 • Weight: 54,0 kg

17272

BRONZE BUSHING FOR DRAWBAR • Trako code: 10-0670-16 • Weight: 0,2 kg

17273

LOCKING PIN WITH GROOVE FOR PNEUMATIC DRAWBAR • Trako code: 08-4-3786 • Weight: 4,4 kg

91

D-3


D-4

FIXED DRAWBARS

Product name

17239

DRAWBAR TRAKO 2009, 179 KN • D-value 179 kN • Tested and approved according to EU-directive 94/20/EC • Approval nr e4*00-3893 The drawbar can be supplied with two types of mounting: • bushing for 32 mm bolt • tapered bushings for 51 mm axle, type Briab • Width between fixing centres c/c = 700 - 900 - 920 - 980 - 1100 - 1200 - 1300 mm • Inform the c/c measurement when placing the order. • Drawbars are delivired without finishing.

Trako № 0630-20

L max 2000

Weight (kg) 54

0630-21 0630-22 0630-23 0630-24 0630-25 0630-26 0630-27 0630-28 0630-29 0630-99

2100 2200 2300 2400 2500 2600 2700 2800 2900 Sign

54 54 55 55 56 57 58 59 60

92


E FRAME FURNITURE ANTI-SPRAY E-1 BODY CLAMPS E-2 BODY MOUNTING FITTINGS E-3 LADDERS E-4 MUDGUARD STAYS E-5 MUDGUARDS E-6 SWAP BODY EQUIPMENTS E-7 WHEEL CHOCKS AND HOLDERS E-8


E-1 №

MUDFLAP SADDLES AND HOLDERS Product name MUDFLAP SADDLES • Bolt kit for mudflap saddle 13035 is sold separately

13035

Length (mm)

13032 13033 13034 13038 13039 13046 13048 13047

420 555 565 500 520 615 645 2550

0,35 0,45 0,45 0,43 0,43 0,50 0,52 2,10

BOLT KIT FOR MUDFLAP SADDLE • • • • •

13141

Weight (kg)

3 pcs. lock screw M6x20 ZN 3 pcs. nut M6 ZN 3 pcs. washer M6 2 pcs. screw 4,8x19 ZN Weight: 0,03 kg

MOUNTING KIT FOR SUPRA MUDGUARDS • Weight: 0,5 kg

13052

MUDFLAP SUPPORT • • • •

13077

3 mm thick anodized aluminium plate Width: 615 mm Overhang: 150 mm Weight: 1,2 kg

INTEGRAL MUDFLAP FIXING BIT • Weight: 0,08 kg

94


MUDFLAPS №

Product name

PARLOK MUDFLAPS • Mounting kit is sold separately 13141 (Mudflap saddles and holders, in the previous page)

13141

SUPRA MUDFLAP • • • • •

Mudflap with anti-spray element for mudguard Approval number: e1*0018*00 Use for example for timber trucks/trailers Available also with custom logo printing Approved anti-spray can be achieved by combining mudguard with Supra mudflap

Mudguard width (mm)

L (mm)

B (mm)

Parlok code

Weight (kg)

13143 13144

405-430 450-455

820 820

370 420

5068405 5068455

1,5 1,5

13148 13155 13159 13165

480-500 550 595-630 650-680

720 720 820 820

445 515 560 615

5068480 5068550 5068595 5068650

1,6 1,9 2,1 2,3

13145 13164

(430) (650)

1080 1080

430 650

5314410 5316610

1,5 1,6

Note! Intermediate part with anti-spray for bogie mudguard.

13145, 13164

95

E-1


E-1 №

MUDFLAPS Product name PARLOK TIMBER SUPRA MUDFLAP • Use for example for timber trucks/trailers • Compatible mudflap saddles 13032-13047 (Mudflap saddles and holders) • Weight: 1,0 kg

Mudguard width (mm)

13032-13047

Parlok code

13340

405-430

5169405

13345

450-455

5169455

13348

480-500

5169480

13355

550

5169550

13359

595-630

5169595

13365

650-680

5169650

13372

720

5169672

TMT-RENSI MUDFLAP • • • • • •

Approval number: e5*91/226*2010/19*0001*00 Energy absorbent Color: black Available also with custom logo printing Compatible mudflap saddles 13032-13047 (Mudflap saddles and holders) Weight: 0,9 kg

Product name

Size (mm)

13171

Mudflap Rensi 6240-1

620 x 400

13173

Mudflap Rensi 6535-1

650 x 350

13175

Mudflap Rensi 6035-1

600 x 350

13177

Mudflap Rensi 6235-1

620 x 350

13179

Mudflap Rensi 5535-1

550 x 350

13181

Mudflap Rensi 4235-1

420 x 350

96

13032-13047


E-1

MUDFLAPS №

Product name TMT MUDFLAP • • • • •

Compatible mudflap saddles 13032-13047 (Mudflap saddles and holders) Lightweight and durable mudflap in polyethen with or without printing Very resistant against chemicals Cold resistant -40°C and moisture rejective Color: black

13032-13047

Product name

Size (mm)

13020 13030 13036 13042 13044 13049

Mudflap 21x30 Mudflap 4235-1 Mudflap 5035-1 Mudflap 6035-1 Mudflap 6240-1 Mudflap 6235-1

210 x 300 420 x 350 500 x 350 600 x 350 620 x 400 620 x 350

13074

Mudflap 6240-1 MAN

620 x 400

MAN

0,95

13067

Mudflap 6240-1 MB

620 x 400

MB

0,89

13061 13062

Mudflap 6240-1 Scania Mudflap 5035-1 Scania

620 x 400 500 x 350

Scania Scania

0,89 0,66

13063

Mudflap 6240-1 Sisu

620 x 400

SISU

0,89

13064 13065 13066

Mudflap 4235-1 Volvo Mudflap 6240-1 Volvo Mudflap 5035-1 Volvo

420 x 350 620 x 400 500 x 350

Volvo Volvo Volvo

0,51 0,89 0,66

13075 13076 13082 13083 13084

Mudflap 2400 x 350 Mudflap 2400 x 350 Integral Mudflap 2500 x 400 Int. LV Mudflap 2400 x 350 Scania Mudflap 2400 x 350 Volvo

2400 x 350 2400 x 350 2500 x 400 2400 x 350 2400 x 350

Long Vehicle Scania Volvo

3,80 3,80 4,00 4,00 4,00

97

Logo

Weight (kg) 0,28 0,51 0,66 0,75 0,88 0,77


E-1 №

MUDFLAPS Product name PRINTING ON MUDFLAPS • • • • •

Surface of the mudflap can be utilized for commercial purposes with custom printing Printing methods: silk screen printing and foil stamping Basic color of mudflap parison is black with white printing Possibility to choose from eight printing color options Printing area is determined by the flap size, which are defined in the table

Maximum printing area (mm)

13000 13001

415 x 330 - for mudflap 13030 457 x 290 - for mudflap 13036

Single wheel flap Dual tire flap

457 x 290 - for mudflap 13049 590 x 345 - for mudflap 13044 Length 1800 - for mudflap 13075 and 13076

Dual tire flap Dual tire flap Long mudflaps

13004 13002 13003

Print documents can be submitted in following formats: • JPG • PDF • Indesign • Photoshop • Illustrator • and other image editing software formats

Printing options for long mudflap 13075, 13076

98


TMT-RENSI ANTI-SPRAY MATS №

Product name TMT-RENSI SPRAY LINER • • • •

Approved together with TMT-Rensi mudflaps Approval number: e5*91/226*2010/19*0001*00 Is installed on the inner surface of a mudguard Weight: 0,88 kg

13200

RENSI SPRAY LINER 400 X 400 MM

13202

RENSI SPRAY LINER 560 X 400 MM

13204

RENSI SPRAY LINER 610 X 400 MM

99

E-1


E-2

BODY CLAMPS

Product name

16600

BODY CLAMP FG-105 • Screwable • Electrogalvanized • Weight: 0,5 kg

16600-1 WASHER FOR BODY CLAMP FG-105 • Weight: 0,05 kg

16601

ADJUSTING PLATE 2,5 MM • Weight: 0,03 kg

16602

ADJUSTING PLATE 4,0 MM • Weight: 0,02 kg

16614

BODY CLAMP FG-125 • • • • • •

16618

Good clamping properties in all circumstances Flexible, while still maintaining optimal clamping properties Compensates 4-14 mm height differences between the frame and bodywork Bolt fastening Hot dip galvanized Weight: 0,76 kg

BODY CLAMP 2-28 MM • • • • • • •

Bolt fastening (M12) Compensates 2-28 mm differences between the frame and bodywork Galvanized Width: 88 mm Length: 60 mm Height: 30 mm Weight: 0,7 kg

100


BODY MOUNTING FITTINGS №

Product name

SISU 16750

FASTENING PLATE M 750 • Finishing: primed • Weight: 1,49 kg

VOLVO

• Finishing: painted • Color: black

16727

UPPER FASTENER M 727 • FL 611-614-616 • FL 4-6-7-10 • Weight: 0,57 kg

16735

FASTENING PLATE M 735 • FL 6 • Weight: 1,64 kg

101

E-3


E-3 №

BODY MOUNTING FITTINGS Product name

VOLVO: FM, FH, NH VERSION 2

Product features: • finishing: painted • color: black

16500

LOWER BRACKET 21021372 • Weight: 0,92 kg • Suitable rubber damper 16529

16503

LOWER BRACKET 21021373 • Weight: 1,54 kg • Suitable rubber damper 16529

16529

ATTACHING PLATE 3172148 16511

ATTACHING PLATE 3172148 • Also suitable for Volvo FE model • Weight: 1,54 kg

16513

ATTACHING PLATE 3172148 W • Welding attachment • Weight: 1,58 kg

16515

ATTACHING PLATE 20392741 • Weight: 1,83 kg

102


BODY MOUNTING FITTINGS №

Product name

VOLVO: FM, FH, NH VERSION 2 Product features: • finishing: painted • color: black

16521

UPPER BRACKET 21190281 • Weight: 0,82 kg

16521 16523

UPPER BRACKET 21190282 • Weight: 0,56 kg

16525

UPPER BRACKET 21215378 • Weight: 0,88 kg • Suitable dampers 16529 and 75515

16523 16527

UPPER BRACKET 21021379 • Weight: 0,59 kg • Suitable dampers 16529 and 75515

16529

16525

16527

103

75515

E-3


E-3 №

BODY MOUNTING FITTINGS Product name

VOLVO: FL Product features: • finishing: powder-coated • color: black RAL9005

16501

VOLVO FL UPPER BRACKET • Weight: 0,80 kg

16504

VOLVO FL LOWER BRACKET • Weight: 1,00 kg

104


BODY MOUNTING FITTINGS №

Product name

VOLVO: FL Product features: • finishing: powder-coated • color: black RAL9005

16505

VOLVO FL UPPER BRACKET • Weight: 0,70 kg

16506

VOLVO FL UPPER BRACKET 16505

• Weight: 0,70 kg

16507

VOLVO FL UPPER BRACKET • Weight: 1,00 kg

16508

VOLVO FL UPPER BRACKET • Weight: 1,00 kg

16506

16507

16508

105

E-3


E-3 №

BODY MOUNTING FITTINGS Product name

SCANIA Product features: • finishing: painted • color: black

16729

LOWER BRACKET M 729 • FL 616 • FL 7-10 • Weight: 0,84 kg

16800

LOWER BRACKET, R-SERIE • Weight: 0,57 kg

16732

UPPER BRACKET M 732 • FL 611-614-616 • FL 4-6-7-10 • Weight: 0,85 kg

16740

UPPER BRACKET M 740 • Weight: 0,55 kg

106


BODY MOUNTING FITTINGS №

Product name

SCANIA Product features: • finishing: painted • color: black

16733

FILLING PLATE M 733 • Weight: 0,12 kg • Suitable for upper bracket 16732 • Compatible rubber pad 16734

16759

16734

ATTACHING PLATE M 759 • Weight: 2,64 kg

16802

ATTACHING PLATE, R-SERIES • Weight: 1,78 kg

107

E-3


E-3 №

BODY MOUNTING FITTINGS Product name

VOLVO, SCANIA Product features: • finishing: painted • color: black

16738

LOWER BRACKET M 738 • • • •

FH 12-16 FL 618 FS 7 Scania 4-series

• Compatible upper bracket M 743 (16743) • Weight: 0,42 kg

16743

UPPER BRACKET M 743 • FH 12-16 • FM 7-10-12 • Scania 4-series • Compatible lower bracket M 738 (16738) • Weight: 0,68 kg

108


BODY MOUNTING FITTINGS №

Product name

VOLVO, SCANIA Product features: • finishing: painted • color: black

16744

ATTACHING PLATE M 744 • FH 12-16 • Scania 4-series • Weight: 1,70 kg

1674412

ATTACHING PLATE M 744, 12 MM • FH 12-16 • Scania 4-series • Material thickness: 12 mm • Weight: 2,64 kg

VOLVO, SCANIA, MAN 16736

ATTACHING PLATE M 736 • Weight: 2,15 kg Suitable models: • FL 7-10 • FM 7-10-12 • MAN TG-A

16731

UPPER BRACKET M731 • Weight: 1,45 kg

109

E-3


E-3 №

BODY MOUNTING FITTINGS Product name

MERCEDES-BENZ

Product features: • finishing: painted • color: black

16767

LOWER BRACKET M 767 • Atego • Weight: 0,52 kg

16768

LOWER BRACKET M 768 • Atego • Weight: 0,25 kg

16773

LOWER BRACKET 058 • Axor • Actros • Weight: 0,38 kg

16769

ATTACHING PLATE M 769 • Atego • Weight: 0,48 kg

110


BODY MOUNTING FITTINGS №

Product name

MERCEDES-BENZ, VOLKSWAGEN

Product features: • material: 4 mm hot-dip galvanized steel

24632

BODY CLAMP • MB Sprinter • VW Crafter • Weight: 0,68 kg

24638

BODY CLAMP SPRINTER BM906, FRONT MONO • MB Sprinter • VW Crafter Weight: 0,57 kg

24639

FILLING PLATE FOR BODY CLAMP 24638 • Filling plate for body clamp 24638 • Rubber pad 16734 (sold separately) • Weight: 0,10 kg

CITROEN, FIAT, PEUGEOT, RENAULT, OPEL, NISSAN 24636

BODY CLAMP • • • • • •

Citroen Jumper Fiat Ducato Peugeot Boxer Renault Master Opel Movano Nissan Interstar

• Material: 4 mm hot-dip galvanized steel • Weight: 0,76 kg

111

E-3


E-3 №

BODY MOUNTING FITTINGS Product name

FORD 24633

BODY CLAMP TRANSIT 430,460 • Ford Transit 430, 460 • Material: 4 mm hot-dip galvanized steel • Weight: 0,71 kg

RENAULT, IVECO 24630

BODY CLAMP DAILY • Iveco • Renault: Mascott • Material: 4 mm hot-dip galvanized steel • Weight: 0,51 kg

16529

RUBBER DAMPER 40 X12 X 40 MM • Weight: 0,06 kg • Suitable for fasteners: 16527, 16500, 16525, 16503

75515

SPRING 15,5/30/45 • Weight: 0,02 kg • Suitable for fasteners: 16527, 16500, 16525, 16503

16734

RUBBER PAD M 734 • Weight: 0,09 kg

112


LADDERS AND RACKS №

Product name ALUMINIUM LADDER, FOLDABLE • • • • •

65480

Measurements for vehicular use Thickness when folded: 80 mm Quick locking Material: aluminum with steel parts Powder coated surface, RAL 9006 (gray)

ALUM. LADDER 255 X 1920 MM • Weight: 4,5 kg

65482

ALUM. LADDER 255 X 2520 MM • Weight: 6,0 kg

65484

ALUM. LADDER 255 X 2820 MM • Weight: 6,8 kg

65323

LADDER 650 X 350 MM • • • •

Lockable sliding and swivel mechanism Two ladders Material: hot-dip galvanized steel Weight: 5,5 kg

113

E-4


E-4

LADDERS AND RACKS

Product name

65324

LADDER 642 X 315 MM • • • •

65326

3-STEP LADDER + PLATFORM • • • •

65329

Lockable sliding and swivel mechanism Two steps Material: galvanized steel Weight: 9,5 kg

Lockable sliding and swivel mechanism Three steps and platform Material: galvanized steel Weight: 14,6 kg

2-STEP TELESCOPIC LADDER + PLATFORM • Two steps and platform • Material: electrogalvanized steel • Weight: 11,6 kg

114


LADDERS AND RACKS №

Product name

65325

FOLDABLE STEP 6710 SS • • • • • •

65327

Surface-mounting Material: stainless steel Thickness when folded: 40 mm Mounting hole spacing: 146 mm Step: 165 x 165 mm Weight: 1,3 kg

FOLDABLE STEP, RECESSED SS • Material: stainless steel • Step: 170 x 150 mm • Weight: 1,1 kg

65331

PLATFORM 200 X 100 MM • Material: stainless steel • Weight: 0,7 kg

115

E-4


E-4

LADDERS AND RACKS

Product name

65322

FOLDABLE STEP HD • • • •

65332

Grille surface Carrying capacity: 140 kg Material: hot-dip galvanized steel Weight: 14,6 kg

LADDER 370 X 340 • Lockable sliding and swivel mechanism • Material: hot-dip galvanized steel • Weight: 3,9 kg

116


LADDERS AND RACKS №

Product name

65333

P&L EUROTRUCK FOLDING LADDER HD • • • • • •

65336

Heavy duty ladder model Lockable mechanism Two steps and platform Material: hot-dip galvanized steel Pastore&Lombardi code: 034722710B Weight: 14,3 kg

P&L STEP H360 MM • Material: electrogalvanized steel • Pastore&Lombardi code: 034711232A • Weight: 1,6 kg

117

E-4


E-4

LADDERS AND RACKS

Product name

75050

STEPS FOR TIMBER TRUCK • • • •

Material: hot-dip galvanized steel Three steps Delivered as components Weight: 9,7 kg

Delivery content: • 1 pc side plate L/H • 1 pc side plate R/H • 3 pcs step • 12 pcs M8x20 HZn • 12 pcs M8 Nylock

RACK FOR LONG GOODS 24800

RACK, FRONT - SHORT FLANGE • Weight: 4,1 kg

24801

RACK, FRONT - LONG FLANGE • Weight: 4,1 kg

24802

RACK, REAR

24801

• Weight: 5,2 kg

24802

24800

118


ACCESSORIES FOR STAYS №

Product name

MOUNTING BRACKET

• NOTE! Installation supplies are not included • Bolt kit for installation 15023

15018

MOUNTING BRACKET, WELD-ON • Material: untreated steel • Weight: 0,6 kg

15018

MOUNTING BRACKET PK

150182IR

MOUNTING BRACKET, 2 FIX.

15018-2IR

MOUNTING BRACKET, BOLT-ON • Material: hot-dip galvanized steel • Weight: 0,8 kg

15019

MOUNTING BRACKET PK

150192IR

MOUNTING BRACKET, 2 FIX.

15019

15019-2IR

15019-2 SUPPORT PLATE FOR MOUNTING BRACKET • Bolts are not included in the delivery • Finishing: hot-dip galvanized • Weight: 0,20 kg

15023

BOLT KIT FOR MOUNTING BRACKET • • • •

1 pc. hex screw M10x40 Kzn 1 pc. nut M10 Kzn 1 pc. washer M10 Kzn Weight: 0,05 kg

119

E-5


E-5 №

ACCESSORIES FOR STAYS Product name TUBE CLAMP M8/45 MM • Weight: 0,02 kg

15020

TUBE CLAMP M8/45 MM • Material: electrogalvanized steel

15020RST

TUBE CLAMP M8/45 MM, SS • Material: stainless steel

15012

MOUNTING PLATE R-650 • • • •

15021

Material: galvanized steel Length: 250 mm Width: 45 mm Weight: 0,20 kg

PLASTIC PLUG • Suitable for galvanized tube stays • Weight: 0,01 kg

15031

PLASTIC PLUG FOR SS TUBE STAYS • Suitable for stainless steel tube stays • Weight: 0,01 kg

15028

PLASTIC BRACKET 82020 • • • •

15030

Material: black ABS plastic M8 fastening bolts included Suitable for tube with Ø 42 mm Weight: 0,10 kg

CONSOLE VR 42,4 ADJUSTABLE • • • • • • •

Parlok code: 29.0000.0150 Adjustment range: 150 mm Duplex-finishing (galvanized, coated) Compatible lock screw M18 Suitable for tube with Ø 42,4 mm Suitable for mudguards with radius R=500-700 mm Weight: 0,48 kg

120


ACCESSORIES FOR STAYS №

Product name

15029

FASTENER PARLOK MR 42 • • • • • • •

Parlok code: 5039700 Material: plastic Adjustment range: 150 mm Hole spacing: 305 mm Suitable for tube with Ø 42 mm Suitable for mudguards with radius R=500-700 mm Weight: 0,30 kg

15029-2 MR42 BOLT SET FOR MUDGUARD • • • •

Bolt set for fixing four pieces of 15029 Suitable for both Parlok White Line and Parlok Supra mudguards (includes alternative bolts) Parlok code: 503940SU Weight: 0,30 kg

BRACKET PARLOK UNIFIX • Material: polyamid (PA) • Weight: 0,11 kg

15032

BRACKET PARLOK UNIFIX 32-42 • Parlok code: 5039300 • Suitable for tube stays with Ø 32 - 42 mm

15033

BRACKET PARLOK UNIFIX 40-50 • Parlok code: 5039301 • Suitable for stube stays with Ø 40 - 50 mm

15034

BRACKET PARLOK P42 • • • • • • •

150372

Parlok-koodi: 5039650 Material: steel Adjustment range: 90 mm Ø 42 mm Color: black, powder-coated Suitable for mudguards with radius R=405-720 mm Weight: 0,36 kg

PLASTIC BRACKET 42 R650 • • • • •

Material: plastic Suitable for tube with Ø 42 mm Max torque 12 Nm Bolt set included Weight: 0.14 kg

121

E-5


E-5 №

FLAT MUDGUARD STAYS Product name MUDGUARD BRACKET • • • • • • • •

Specially developed product for timber cars and trailers Easy to assembly No dirt or snow collecting details, mounted below the mudguard Hot-dip galvanizing protects againt corrosion Fully compatible with TMT mounting bracket Flat bar of spring steel Mounting tube Ø 42,4 x 2,6 mm Bolt set 15048 for sealing flat rods and mounting tube is sold separately

15040 / 15042 + 15047

15040, 15042, 15044

15040

MUDGUARD BRACKET, 500 MM • Width: 500 mm • Weight: 2,1 kg

15042

MUDGUARD BRACKET, 540 MM • Width: 540 mm • Weight: 2,4 kg

15044

MUDGUARD BRACKET, 600 MM • Width: 600 mm • Weight: 2,8 kg

122


FLAT MUDGUARD STAYS №

Product name MOUNTING TUBE • Finishing: hot-dip galvanized

15043

MOUNTING TUBE, SHORT • Width: 88 mm • Weight: 1,0 kg

15046

MOUNTING TUBE, LONG • Width: 178 mm • Weight: 1,4 kg

15047

FLAT STAY SUPPORT • Suitable for 15040 and 15042 • Weight: 1,4 kg

15048

BOLT KIT FOR FLAT MUDGUARD STAY • • • •

15049

1 pc. hex screw HOT 16x40 2 pcs. Wurth Lock pair of locking plate M16 1 pc. nut KZN M16 Weight: 0,03 kg

BOLT KIT FOR FASTENING FLAT MUDGUARD STAY • • • • •

Bolt kit for fastening flat mudguard stay to mudguard 3 pcs. socket head screw M8x25 Zn 3 pcs. 4 angle washer Zn M8 3 pcs. Nyloc nut Zn M8 Weight: 0,02 kg

123

E-5


E-5

TUBE STAYS

Product name

TUBE STAYS • • • •

The mudguard can be easily adjusted to the right level with the help of eccentrically shaped rods (curved tube stays) TMT-mounting bush guarantees secure and easy assembly of the tube stay Hot-dip galvanizing guarantees good protection against corrosion Stainless steel option also available

15018

15019

TUBE STAY PK • Suitable plug 15021 (Accessories for stays) • Tube: Ø 42,5 mm, thickness 2,6 mm • Material: hot-dip galvanized steel

15021

STAINLESS STEEL TUBE STAY PK • Suitable plug 15031 (Accessories for stays) • Tube: Ø 42,5 mm, thickness 2 mm • Material: stainless steel

Product name

15006 15003 15013 15014 15016 15016-100

PK-650, straight PK-750, straight PK-650 PK-705 PK-760 PK-760 R100

95 95 95 95

355 460 465 480

650 760 650 705 760 760

15015

PK-705, SS

95

460

PK-760, SS

95

465

15017

A (mm)

15031

B (mm)

124

C (mm)

D (mm)

Weight (kg)

53 53 150 100

1,7 2,2 1,7 1,8 2,1 2,1

705

53

1,4

760

150

1,5


TUBE STAYS №

Product name

15005

TUBE STAY PK-760 M150 • Material: steel • Finishing: hot-dip galvanized • Weight: 2,00 kg

15011

TUBE STAY PK-580/34 • • • •

Material: steel Finishing: electrogalvanized Bolt, washer and end plug included Weight: 2,00 kg

125

E-5


E-5

U AND V STAYS

Product name

15007

FASTENER U-700 • • • • •

15009

Material: 3 mm steel plate Finishing: primed Includes two bolt sets (15009) Length: 700 mm Weight: 2,60 kg

BOLT SET FOR U-700 FASTENER • Weight: 0,09 kg Includes: • 1 pc. washer 4-edge (15009-T1) • 1 pc. locking screw M10x25 ZP (64402) • 1 pc. nut M10 Zn (64,411) • 1 pc. washer 30 * 11 * 3.0 Zn (64505)

15009T1

15010

WASHER FOR U-FASTENER • Compatible lock screw M10 • Size: 40 x 40 mm • Weight: 0,04 kg

BOTTOM PLATE U • Material: galvanized steel • Weight: 0,38 kg

15022

BRACKET V-750 • Material: painted steel • Weight: 2,50 kg

126


U AND V STAYS №

Product name

15024

BOTTOM PLATE FOR BRACKET V-750 • Finishing: galvanized • Weight: 0,59 kg

15027-4 MOUNTING PLATE, DETACHABLE 4 MM • Material: 4 mm aluminium • Weight: 0,89 kg

127

E-5


E-6 №

MUDGUARDS Product name PARLOK THREE-PIECE MUDGUARDS • • • • • •

№ 11270 11270-R 11280 11285 11290

Wide range to cover most tyre sizes Available with spray suspensions Center section is easy to remove Material HDPE Complete mudguard to meet the requirements of EC directive 91/226/ETY Delivered as a series-Axle (EXC. 11300 and 11305)

Length L

Length S

Width B

Radius R

1900 1900 1900 1800 1900

1260 1260 1300 1160 1260

405 405 430 480 650

635 635 650 580 630

Length H

Width B

910 660

670 660

№ 11300 11305

Top piece End piece

11270-R

11300

128

Parlok code

Weight (kg)

5124030 5164030 5126530 5124830 5120095

7,0 10,0 7,0 7,0 12,0

Parlok code

Weight (kg)

5036650 5010266

3,0 2,3

11305


MUDGUARDS №

Product name PARLOK ½SUPRA MUDGUARDS • • • •

Includes mudguard with integrated Supra anti-spray Use together with the Timber Supra mudflap Meets the requirements of directive 91/226/EEC Delivered in pairs

№ 11008-HS 11009-HS 11015-HS 11030-HS 11031-HS 11040-HS 11045-HS 11051-HS 11054-HS 11060-HS 11062-HS

Length L

Length S

Radius R

1900 2090 1900 1650 1850 1700 1900 1800 1700 1700 1800

680 670 650 630 630 595 550 405 500 480 480

630 670 630 580 580 550 650 580 500 500 580

129

Parlok code

Weight (kg)

5166819HS 5166721HS 5166519HS 5166316HS 5166318HS 5165917HS 5164319HS 5124018HS 5165517HS 5165014HS 5124818HS

7,0 7,3 6,1 3,5 3,5 3,5 4,1 4,0 3,2 2,7 3,8

E-6


E-6 №

MUDGUARDS Product name PARLOK SUPRA MUDGUARDS • • • • • •

Meets the requirements of directive 91/226/EEC Self-cleaning structure Lightweight and durable Wide range covers most common tire sizes Material: HDPE Delivered in pairs

Includes: • mudguard with integrated Parlok Supra mudflap

№ 11005-R 11007-R 11008-R 11009-R 11015-R 11029-R 11030-R 11031-R 11038-R 11040-R 11041-R 11044-R 11045-R 11051-R 11054-R 11055-R 11056-R 11058-R 11059-R 11062-R

Length L

Length F

Length S

Width B

Radius R

2575 2050 2300 2490 2300 1930 2050 2250 1870 2000 2490 2300 2200 2100 2000 2000 950 2000 2150 2100

400 400 400 400 400 400 400 300 300 400 400 300 300 300 300 300

1260 1160 1260 1320 1260 1160 1160 1000 1100 1370 1300 1160 1000 1100 1100 1160

680 680 680 670 650 630 630 630 595 595 455 450 430 405 550 550 550 500 550 480

630 580 630 670 630 530 580 580 500 550 685 650 650 580 500 550 550 550 550 580

Height H Parlok code Weight (kg) 1030 980 1030 1070 1030 980 980 800 850 1090 1050 890 800 850 850 890

5166825 5166822 5166823 5166724 5166523 5120953 5166320 5166322 5165918 5165920 5164524 5164522 5164322 5164026 5165519 5165520 5165509 5165021 5161555 5164821

4,0 6,0 7,0 7,3 6,1 3,5 5,8 5,9 5,2 5,5 4,4 0,9 4,1 4,0 3,5 5,1 2,5 3,2 4,0 4,4

Please note! The Parlok numbered tyre size charts for mudguards can be found end of this section. You can also use Parlok product codes in TMT webpage’s search.

130


E-6

MUDGUARDS №

Product name PARLOK WHITE LINE MUDGUARDS

№ 11005 11006 11007 11008 11009 11010 11015 11016 11020 11025 11026 11027 11029 11030 11031 11035 11036 11038 11039 11040 11041 11042 11043 11045 11046 11048 11050 11051 11054 11055 11056 11057

Length L

Length S

Width B

Radius R

Height H

2175 1650 1800 1900 2090 2175 1900 1900 1600 650 1650 1800 1630 1650 1850 1850 1930 1570 650 1700 2290 2090 650 1900 2175 1420 1900 1800 1700 1700 650 2140

1260 1150 1160 1260 1340 1260 1260 1260 630 1150 1160 1060 1150 1160 1160 1280 1000 1100 1370 1350 630 1300 1300 840 1270 1160 1000 1100 610 1370

680 680 680 680 670 650 650 720 650 650 650 650 630 630 630 600 610 595 595 595 455 455 430 430 430 415 405 405 550 550 550 500

630 580 580 630 670 630 630 630 630 630 580 580 530 580 580 580 640 500 500 550 685 685 650 650 650 420 635 580 500 550 550 685

730 495 580 590 660 730 590 590 120 495 580 515 495 595 595 610 500 530 755 655 120 580 720 460 595 580 550 530 120 670

131

Parlok code Weight (kg) 5110217 5110165 5110185 5110190 5110300 5120217 5120190 5112190 5020160 5120071 5120165 5120185 5120953 5120940 5120941 5121180 5121050 5122157 5021171 5122170 5125022 5125020 5126069 5126190 5126217 5126504 5126503 5124018 5123171 5123175 5123000 5124214

4,0 4,0 4,4 4,6 5,0 4,7 4,0 4,0 3,7 1,5 3,6 3,9 3,5 3,5 3,5 3,7 3,7 3,7 1,3 3,5 3,7 3,4 0,9 2,7 3,0 2,0 2,6 2,5 3,2 3,2 1,2 3,2


E-6 №

MUDGUARDS Product name PARLOK WHITE LINE MUDGUARDS

Length L

Length S

Width B

Radius R

Height H

11058 11059 11060 11061 11062 11063 11064 11065 11070

1700 1850 1700 650 1800 1600 1600 1400 1300

1100 1250 1000 600 1160 960 1000 840 -

500 550 500 500 480 455 500 450 240

550 550 500 500 580 480 500 420 420

530 530 550 120 580 525 500 450 -

Length L

Width B

Radius R

700 2560 2050 1950

680 430 430 480

630 650 650 580

11066 11252 11254 11256

Parlok code Weight (kg) 5124870 5121555 5124170 5124000 5124818 5125000 5124160 5125140 5027130

3,2 3,0 2,7 1,0 3,8 2,6 2,7 2,4 1,1

Parlok code

Weight (kg)

5110070 5300443 5121543 5121548

F400 F150 F150

2,4 3,8 3,8 3,8

Parlok code Weight (kg)

quarter steering axle steering axle steering axle

PARLOK FLAT TOP MUDGUARDS

№ 11308 11310 11400 11403 11405 11410

Length L

Length F

Length S

Width B

Radius R

Height H

1400 1570 1400 1570 1770 1880

400 500 400 440 550 650

840 900 840 900 1000 1150

260 260 450 450 510 550

360 410 360 410 450 510

440 480 440 480 560 570

5026565 5026560 5025135 5025137 5023950 5024188

1,7 1,7 3,4 3,6 3,9 3,7

Please note! The Parlok numbered tyre size charts for mudguards can be found end of this section. You can also use Parlok product codes in TMT webpage’s search.

132


MUDGUARDS №

E-6

Product name TANDEM MUDGUARDS • Made from High Density Polyethylene, HDPE (EXC. 11900) • Good resistance to impacts, chemicals and temperatures

№ 11100 11105 11110 11115 11125 11306 11306-R 11900

End piece, plastic End piece, plastic Flat part, plastic Flat part, plastic Tandem, supra Spat Spat, supra Tandem, aluminium

Length L/I

Length S

2120 2120 1000 1000 3880

1700 1700

3550

Width B

430 650 430 650 2680 650 see dimensional drawning see dimensional drawning 2650 650

Radius R 650 650

630

650

Parlok code

Weight (kg)

5304417 5306617 5304411 5306611 5316638 5024606 5024610 1865360011

4,0 5,2 2,0 2,4 12,0 2,1 2,5 19,4

11100, 11105

11110, 11115

11125

11900

11306

11306-R

133


E-6 №

MUDGUARDS Product name PARLOK COLOR MUDGUARDS • Material: HDPE Colour codes: • red: RAL 3000/3001 • blue: RAL 5010

Color

11008-PU 11008-SI 11010-PU 11015-PU 11030-PU 11030-SI 11031-PU 11031-SI 11040-PU 11040-SI 11045-PU 11045-SI 11050-SI 11051-PU 11062-PU 11062-SI

Red Blue Red Red Red Blue Red Blue Red Blue Red Blue Blue Red Red Blue

Length L

Width B

Radius R

Parlok code

Weight (kg)

1900 1900 2175 1900 1650 1650 1850 1850 1700 1700 1900 1900 1900 1800 1800 1800

680 680 650 650 630 630 630 630 595 595 430 430 405 405 480 480

630 630 630 630 580 580 580 580 550 550 650 650 635 580 580 580

5010190RED 5010190BLU 5020217RED 5120190RED 5120940RED 5120940BLU 5120941RED 5120941BLU 5022170RED 5022170BLU 5026190RED 5026190BLU 5126503BLU 5024018RED 5024818RED 5024818BLU

4,6 4,6 4,7 4,0 3,5 3,5 3,5 3,5 3,5 3,5 2,7 2,7 2,6 4,6 3,8 3,8

1700

595

550

5165917HSRED

3,5

2050

630

580

5166320RED

5,8

Parlok ½Supra mudguard 11040-HS-PU Red Parlok Supra mudguard 11030-R-PU

11120

Red

EXTENSION FOR MUDGUARD 3 X 300 X 2200 • Parlok code: 2053320 • Weight 2,4 kg

Please note! The Parlok numbered tyre size charts for mudguards can be found end of this section. You can also use Parlok product codes in TMT webpage’s search.

134


E-6

MUDGUARDS №

Product name PARLOK MUDGUARD TYRE SIZE CHART • Please note that the Parlok Supra mudguard tyre sizes are in a separate chart

Parlok code Tyre size 5123175 5023950 5122170 5023950 5026560 5125000 5023950 5124170 5024188 5123175 5024188 5123175 5123175 5024188 5120165 5124018 5123175 5024188 5026560 5125000 5023950 5124160 5023950 5124160 5023950 5024188 5123175 5024188 5122170 5120940 5125000 5025137 5026560 5023950 5124160 5026560 5124160 5023950

R 15 R 15 R 15 R 16 R 16 R 16 R 16 R 16 R 16 R 16 R 16 R 16 R 16 R 16 R 16 R 16 R 17 R 17 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5

Tyre width

Max width

Dual spacing

8.25 8.25 10.00 7.00 7.00 7.00 7.50 7.50 8.25 8.25 9.00 9.00 255/100 255/100 305/95 325/85 8.25 8.25 8 8 8 8.5 8.5 9 9 9.5 9.5 10 10 11 205/65 205/65 205/65 205/75 205/75 205/75 215/75 215/75

237 237 283 204 204 204 216 216 237 237 253 253 262 262 300 341 237 237 214 214 214 221 221 237 237 247 247 262 262 287 214 214 214 214 214 214 222 222

267 267 308 230 230 230 240 240 264 264 274 274 282 282 335

234 234 234 236 236 260 260 272 272 282 282 318 234 234 234 250 250 250 260 260

135

Max diam. Type 830 830 942 795 795 795 814 814 874 874 927 927 936 936 1010 980 900 900 794 794 794 813 813 831 831 854 854 870 870 914 721 721 721 765 765 765 779 779

Model

White Line Flat Top White Line Flat Top Flat Top White Line Flat Top White Line Flat Top White Line Flat Top White Line White Line Flat Top White Line White Line White Line Flat Top Flat Top White Line Flat Top White Line Flat Top White Line Flat Top Flat Top White Line Flat Top White Line White Line White Line Flat Top Flat Top Flat Top White Line Flat Top White Line Flat Top

Twin Twin Twin Twin Single Twin Twin Twin Twin Twin Twin Twin Twin Twin Twin Single Twin Twin Single Twin Twin Twin Twin Twin Twin Twin Twin Twin Twin Twin Twin Twin Single Twin Twin Single Twin Twin


E-6 №

MUDGUARDS Product name PARLOK MUDGUARD TYRE SIZE CHART • Please note that the Parlok Supra mudguard tyre sizes are in a separate chart

Parlok code Tyre size 5026560 5124170 5023950 5026560 5024188 5123171 5024188 5123171 5024188 5123171 5024188 5123171 5122170 5124018 5125000 5023950 5023950 5124170 5024188 5124870 5123175 5024188 5024188 5121180 5120940 5120185 5124018 5124018 5126190 5124214 5124214 5123175 5024188 5123171 5122157 5120953 5122170 5120940

R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5

Tyre width

Max width

Dual spacing

215/75 225/70 225/70 225/70 225/75 225/75 235/75 235/75 245/70 245/70 245/75 245/75 265/70 355/45 7 7 8 8 9 9 9.5 9.5 10 10 11 12 12 15 16.5 18 19.5 245/65 245/70 245/70 255/60 265/55 265/70 285/70

222 235 235 235 237 237 245 245 260 260 260 260 275 368 191 191 214 214 237 237 247 247 262 262 287 309 309 399 438 471 495 248 260 260 260 265 275 297

260 263 263 263 266 266 282 282 290 290 290 290 298 209 209 229 229 260 260 274 274 292 292 317 341 341

280 288 288 290 295 309 332

136

Max diam. Type 779 773 773 773 797 797 811 811 803 803 827 827 831 777 809 809 867 867 906 906 926 926 949 949 984 1023 1023 998 1063 1100 1134 814 853 853 813 799 881 911

Model

Flat Top White Line Flat Top Flat Top Flat Top White Line Flat Top White Line Flat Top White Line Flat Top White Line White Line White Line White Line Flat Top Flat Top White Line Flat Top White Line White Line Flat Top Flat Top White Line White Line White Line White Line White Line White Line White Line White Line White Line Flat Top White Line White Line White Line White Line White Line

Single Twin Twin Single Twin Twin Twin Twin Twin Twin Twin Twin Twin Single Twin Twin Twin Twin Twin Twin Twin Twin Twin Twin Twin Twin Single Single Single Single Single Twin Twin Twin Twin Twin Twin Twin


E-6

MUDGUARDS №

Product name PARLOK MUDGUARD TYRE SIZE CHART • Please note that the Parlok Supra mudguard tyre sizes are in a separate chart

Parlok code Tyre size 5124018 5110185 5110185 5124018 5124018 5124018 5124818 5124818 5124818 5124214 5023950 5124870 5124870 5024188 5024188 5124818 5121180 5024188 5121050 5121050 5126503 5120190 5126503 5126190 5110300 5126503 5110190 5125120 5126503 5126190 5126503 5126190 5123175 5126503 5126190 5126503 5125120 5124214

R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20

Tyre width

Max width

Dual spacing

305/70 305/70 315/70 315/70 385/55 385/65 425/55 435/50 445/45 445/65 6.50 6.50 7.00 7.00 7.50 7.50 8.25 8.25 9.00 10.00 10.00 11.00 11.00 12.00 12.00 12/80 12/80 13.00 13/80 14.75/80 14/80 15.5/80 225/90 335/80 365/80 365/85 395/85 475/60

320 320 328 328 400 405 442 460 458 477 186 186 204 204 216 216 237 237 266 283 283 295 295 319 319 314 314 346 336 381 361 396 240 350 382 382 405 475

354 354 362 362

216 216 222 222 243 243 273 273 296 319 319 339 339 358 358 349 349

276

137

Max diam. Type 941 941 937 937 936 1020 981 949 910 1097 871 871 904 904 941 941 976 976 1033 1068 1068 1099 1099 1140 1140 1023 1023 1196 1064 1142 1107 1177 926 1066 1116 1152 1206 1078

Model

White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line Flat Top White Line White Line Flat Top Flat Top White Line White Line Flat Top White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line

Single Twin Twin Single Single Single Single Single Single Single Twin Twin Twin Twin Twin Twin Twin Twin Twin Twin Single Twin Single Single Twin Single Twin Single Single Single Single Single Twin Single Single Single Single Single


E-6 №

MUDGUARDS Product name PARLOK MUDGUARD TYRE SIZE CHART • Please note that the Parlok Supra mudguard tyre sizes are in a separate chart

Parlok code Tyre size 5124214 5124818 5024188 5121180 5024188 5124870 5122300 5024188 5123175 5126503 5121050 5121180 5110190 5126503 5126503 5110190 5126503 5110190 5112190 5126190 5126503 5126503 5125120 5124214 5124870 5023950 5122170 5122170 5120940 5120190 5126503 5120940 5120185 5126503 5120190 5126503 5110190 5110190

R 20 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5

Tyre width

Max width

475/80 8 8 9 9/70 9/70 10 10/70 10/70 11 11 11/70 12 12 12/70 12/70 12/80 12/80 13 13 13/70 15 16.5 18 215/75 215/75 255/70 265/60 275/70 275/80 275/80 285/60 295/60 295/70 295/70 295/75 295/75 295/80

498 214 214 237 236 236 262 262 262 287 287 279 309 309 320 320 320 320 328 328 340 399 438 471 211 211 268 275 290 290 290 299 307 313 313 313 313 313

Dual spacing 247 247 260 257 257 286 286 286 318 318 322 342 342 346 346 344 344 360 360

246 246 297 300 322 324 324 327 333 330 330 348 348 348

138

Max diam. Type 1298 947 947 982 901 901 1033 938 938 1064 1064 973 1099 1099 1018 1018 1064 1064 1141 1141 1047 1089 1139 1176 894 894 944 890 973 1030 1030 928 940 1005 1005 1032 1032 1062

Model

White Line White Line Flat Top White Line Flat Top White Line White Line Flat Top White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line Flat Top White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line

Single Twin Twin Twin Twin Twin Twin Twin Twin Single Twin Twin Twin Single Single Twin Single Twin Twin Single Single Single Single Single Twin Twin Twin Twin Twin Twin Single Twin Twin Single Twin Single Twin Twin


E-6

MUDGUARDS â„–

Product name PARLOK MUDGUARD TYRE SIZE CHART • Please note that the Parlok Supra mudguard tyre sizes are in a separate chart

Parlok code Tyre size 5126503 5124018 5110185 5126503 5110190 5124018 5110185 5110190 5126503 5112190 5126503 5126503 5112190 5126503 5126503 5124018 5126503 5125122 5124018 5126190 5125120 5125122 5124818 5125120 5124818 5124818 5124818 5124214 5124214 5124818 5124818 5124818 5122300 5110300 5126190 5125120 5110300 5125120

R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 24 R 24 R 24 R 24 R 24,5

Tyre width

Max width

Dual spacing

295/80 305/60 305/60 305/70 305/70 315/60 315/60 315/70 315/70 315/75 315/75 315/80 315/80 345/75 350/75 355/50 365/70 375/90 385/55 385/65 385/80 385/95 415/45 425/65 435/45 445/40 445/50 445/65 445/75 455/40 455/45 455/55 495/45 11.00 11.00 12.00 12.00 14/80

313 312 312 320 320 319 319 328 328 328 328 328 328 365 364 375 380 387 401 408 405 398 433 452 457 453 463 477 462 471 471 470 519 295 295 319 319 361

348 348 348 349 349 360 360

360 360 363 363

342 342 350 350

139

Max diam. Type 1062 952 952 1018 1018 966 966 1032 1032 1063 1063 1096 1096 1111 1097 942 1104 1276 1012 1092 1212 1270 960 1146 980 936 1036 1174 1266 950 998 1092 1036 1199 1199 1244 1244 1209

Model

White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line White Line

Single Single Twin Single Twin Single Twin Twin Single Twin Single Single Twin Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single Twin Single Single Twin Single


E-6 №

MUDGUARDS Product name PARLOK MUDGUARD TYRE SIZE CHART • Please note that the Parlok Supra mudguard tyre sizes are in a separate chart

Parlok code Tyre size 5120190 5110300 5126503 5126503 5110190 5112190 5126503

R 24,5 R 24,5 R 24,5 R 24,5 R 24,5 R 24,5 R 24,5

Tyre width

Max width

285/75 295/80 295/80 305/75 305/75 315/75 315/75

283 313 313 320 320 328 328

Dual spacing 345 345 350 350 360 360

140

Max diam. Type 1050 1112 1112 1098 1098 1112 1112

Model

White Line White Line White Line White Line White Line White Line White Line

Twin Twin Single Single Twin Twin Single


MUDGUARDS â„–

Product name PARLOK SUPRA MUDGUARD TYRE SIZE CHART

Parlok code Tyre size 5165520 5165920 5165019 5165020 5165520 5165520 5165520 5166520 5164026 5165520 5165019 5165019 5165019 5165520 5165920 5166320 5165019 5165019 5165019 5165019 5165519 5165519 5165519 5165519 5165920 5164026 5165019 5165020 5165021 5165520 5166022 5166320 5166520 5164026 5164026 5164323 5165025 5165025 5165520 5165519

R 15 R 15 R 16 R 16 R 16 R 16 R 16 R 16 R 16 R 17 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 17,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5

Tyre width

Max width

Dual spacing

Max diam.

8.25 10.00 7.00 7.50 8.25 9.00 255/100 305/95 325/85 8.25 8 8.5 9 9.5 10 11 205/65 205/75 215/75 225/70 225/75 235/75 245/70 245/75 265/70 355/45 7 8 9 9.5 10 11 12 12 15 16.5 18 19.5 245/65 245/70

237 283 204 216 237 253 262 300 341 237 214 221 237 247 262 287 214 214 222 235 237 245 260 260 275 368 191 214 237 247 262 287 309 309 399 438 471 495 248 260

267 308 230 240 264 274 282 335

830 942 795 814 874 927 936 1010 980 900 794 813 831 854 870 914 721 765 779 773 797 811 803 827 831 777 809 867 906 926 949 984 1023 1023 998 1063 1100 1134 814 853

234 236 260 272 282 318 234 250 260 263 266 282 290 290 298 209 229 260 274 292 317 341 341

280 288

141

Model Twin Twin Twin Twin Twin Twin Twin Twin Single Twin Twin Twin Twin Twin Twin Twin Twin Twin Twin Twin Twin Twin Twin Twin Twin Single Twin Twin Twin Twin Twin Twin Twin Single Single Single Single Single Twin Twin

E-6


E-6 â„–

MUDGUARDS Product name PARLOK SUPRA MUDGUARD TYRE SIZE CHART

Parlok code Tyre size 5165918 5166319 5165920 5166320 5164026 5166822 5164026 5166822 5164026 5164026 5164821 5164821 5164821 5165025 5165021 5165021 5164821 5166022 5166123 5164023 5166123 5166523 5164023 5164323 5166724 5164023 5166823 5164524 5164023 5164323 5164023 5164323 5165520 5164023 5164323 5164023 5164524 5165025 5165025 5164821

R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 19,5 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 20 R 22,5

Tyre width

Max width

Dual spacing

Max diam.

255/60 265/55 265/70 285/70 305/70 305/70 315/70 315/70 385/55 385/65 425/55 435/50 445/45 445/65 6.50 7.00 7.50 8.25 9.00 10.00 10.00 11.00 11.00 12.00 12.00 12/80 12/80 13.00 13/80 14.75/80 14/80 15.5/80 225/90 335/80 365/80 365/85 395/85 475/60 475/80 8

260 265 275 297 320 320 328 328 400 405 442 460 458 477 186 204 216 237 266 283 283 295 295 319 319 314 314 346 336 381 361 396 240 350 382 382 405 475 498 214

290 295 309 332 354 354 362 362

813 799 881 911 941 941 937 937 936 1020 981 949 910 1097 871 904 941 976 1033 1068 1068 1099 1099 1140 1140 1023 1023 1196 1064 1142 1107 1177 926 1066 1116 1152 1206 1078 1298 947

216 222 243 273 296 319 319 339 339 358 358 349 349

276

247

142

Model Twin Twin Twin Twin Single Twin Single Twin Single Single Single Single Single Single Twin Twin Twin Twin Twin Single Twin Twin Single Single Twin Single Twin Single Single Single Single Single Twin Single Single Single Single Single Single Twin


MUDGUARDS â„–

Product name PARLOK SUPRA MUDGUARD TYRE SIZE CHART

Parlok code Tyre size 5166022 5165021 5165823 5165520 5166123 5164023 5166022 5164023 5166823 5164023 5166823 5166823 5164023 5164323 5167223 5164023 5164023 5164524 5165025 5165021 5165920 5165920 5166320 5164023 5166523 5166320 5166520 5164023 5166523 5164023 5166823 5164023 5166823 5164026 5166822 5164023 5166823 5164026 5166822 5166823

R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5

Tyre width

Max width

Dual spacing

Max diam.

9 9/70 10 10/70 11 11 11/70 12 12 12/70 12/70 12/80 12/80 13 13 13/70 15 16.5 18 215/75 255/70 265/60 275/70 275/80 275/80 285/60 295/60 295/70 295/70 295/75 295/75 295/80 295/80 305/60 305/60 305/70 305/70 315/60 315/60 315/70

237 236 262 262 287 287 279 309 309 320 320 320 320 328 328 340 399 438 471 211 268 275 290 290 290 299 307 313 313 313 313 313 313 312 312 320 320 319 319 328

260 257 286 286 318 318 322 342 342 346 346 344 344 360 360

982 901 1033 938 1064 1064 973 1099 1099 1018 1018 1064 1064 1141 1141 1047 1089 1139 1176 894 944 890 973 1030 1030 928 940 1005 1005 1032 1032 1062 1062 952 952 1018 1018 966 966 1032

246 297 300 322 324 324 327 333 330 330 348 348 348 348 348 348 349 349 360 360

143

Model Twin Twin Twin Twin Twin Single Twin Single Twin Single Twin Twin Single Single Twin Single Single Single Single Twin Twin Twin Twin Single Twin Twin Twin Single Twin Single Twin Single Twin Single Twin Single Twin Single Twin Twin

E-6


E-6 â„–

MUDGUARDS Product name PARLOK SUPRA MUDGUARD TYRE SIZE CHART

Parlok code Tyre size 5164023 5167223 5164023 5167223 5164023 5164023 5164023 5164026 5164023 5164524 5164026 5164323 5164524 5164524 5164821 5164524 5164821 5164821 5164821 5165025 5165025 5164821 5164821 5164821 5165823 5164323 5166724 5164524 5166724 5164524 5166523 5166724 5164023 5166823 5164023 5167223 5164023

R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 22,5 R 24 R 24 R 24 R 24 R 24,5 R 24,5 R 24,5 R 24,5 R 24,5 R 24,5 R 24,5 R 24,5

Tyre width

Max width

315/70 315/75 315/75 315/80 315/80 345/75 350/75 355/50 365/70 375/90 385/55 385/65 385/80 385/95 415/45 425/65 435/45 445/40 445/50 445/65 445/75 455/40 455/45 455/55 495/45 11.00 11.00 12.00 12.00 14/80 285/75 295/80 295/80 305/75 305/75 315/75 315/75

328 328 328 328 328 365 364 375 380 387 401 408 405 398 433 452 457 453 463 477 462 471 471 470 519 295 295 319 319 361 283 313 313 320 320 328 328

Dual spacing 360 360 363 363

342 342 350 350

345 345 350 350 360 360

144

Max diam. 1032 1063 1063 1096 1096 1111 1097 942 1104 1276 1012 1092 1212 1270 960 1146 980 936 1036 1174 1266 950 998 1092 1036 1199 1199 1244 1244 1209 1050 1112 1112 1098 1098 1112 1112

Model Single Twin Single Twin Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single Twin Single Twin Single Twin Twin Single Twin Single Twin Single


CONTAINER LOCKS №

E-7

Product name

CONTAINER LOCK

• Suitable for ISO standard corner castings • Interchangeable locking components

16230

TWIST LOCK BLR 151/3 • Weight: 6,5 kg

16231

SPARE TRUNNION BLR 151/3 • Weight: 3,1 kg

16232

16230

16231

16232

16233

TWIST LOCK STL 1320 RS • Locking piston height is adjustable • Weight: 10,3 kg

16233

SPARE TRUNNION BLR 148/RS3 • Weight: 4,9 kg

16230

16232

145


E-7 №

CONTAINER LOCKS Product name

CONTAINER CORNER

• Meets the requirements of ISO 1161 / BSS 3951 and Lloyds • Material: cast steel • Weight: 10,7 kg

CONTAINER CORNER, LOWER 16240

CONTAINER CORNER, LOWER - LF/RR • Left front / right rear

16241

CONTAINER CORNER, LOWER - RF/LR • Right front / left rear

16240 Note! This image can be suited as mirror image also for product 16241.

146


CONTAINER LOCKS №

Product name

CONTAINER CORNER

• Meets the requirements of ISO 1161 / BSS 3951 and Lloyds • Material: cast steel • Weight: 10,7 kg

CONTAINER CORNER, UPPER 16242

CONTAINER CORNER, UPPER - LF/RR • Left front / right rear

16243

CONTAINER CORNER, UPPER - RF/LR • Right front / left rear

16243 Note! This image can be suited as mirror image also for product 16242.

147

E-7


E-7 №

CONTAINER LOCKS Product name LOCK FOR SWAP BODY • Material: primed steel • Weight: 38,7 kg

16255

LOCK FOR SWAP BODY UP-86 • External locking • Weight: 38,7 kg

16257

LOCK FOR SWAP BODY SP-86 • Internal locking • Weight: 25,0 kg

16258

SPRING FOR MV-86 • Spare part for swap locks • Material: spring steel • Weight: 0,5 kg

16259

HOOK FOR MV-86 • Spare part for swap body lock 16255 • Material: steel • Weight: 3,8 kg

16255

148


CONTAINER LOCKS №

Product name

16260

LOCK FOR SWAP BODY SP-TRAKO • • • • • •

Pneumatic locking Working pressure 6.0 bar, the pressure force of 2660 N Internal locking, frame width min 948 mm (inside measurement) Protection for the shank Weight: 19.5 kg Trako code: 10-0592-00

Includes: • 1 pc. the control unit (16261) • 2 pcs. wire wheel • 1 pc. wire (mechanical lock)

16261

LEVER FOR SWAP BODY LOCK - TRAKO • • • •

Is included in lock for swapbody 16260 Pressure (max): 10,0 bar Weight: 0,5 kg Trako code: 10-0595-01

149

E-7


E-7

SUPPORT LEGS

Product name

17450

SUPPORT LEG FOR SWAPBODY • • • • •

Material: untreated steel Meets the requirements of standard SFS 4417 The carrying capacity 4,5 tons/leg, whole weight tot. 18 t Welded to the platform base Weight: 38.0 kg

SUPPORT LEG RUNNER • Suitable for support leg 17450 • Weight: 23,0 kg

17454 OK 17454 VK

SUPPORT LEG RUNNER, R/H • Right-hand side runner for attaching support leg

SUPPORT LEG RUNNER, L/H • Left-hand side runner for attaching support leg

17454 OK

SOCKET FOR SUPPORT LEG STRUT • Suitable for support leg 17450 • Weight: 1,8 kg

17455 OK 17455 VK

SOCKET, R/H • Socket for right-hand side support leg strut

SOCKET, L/H • Socket for left-hand side support leg strut

150

17454 VK


SUPPORT LEGS №

Product name SUPPORT LEG FOR SWAPBODY 970-1320 MM • • • • •

Fulfills standard DIN EN 284 Includes counter bearing 17462 and support 17464 The carrying capacity 4,5 tons/leg, whole weight tot. 18 t Surface treatment: painted Weight: 45,1 kg

17460OK

SUPPORT LEG 970-1320 MM, R/H

17460VK

SUPPORT LEG 970-1320 MM, L/H

17462

COUNTER BEARING • Suitable for support legs 17460-OK and VK • Material: untreated steel • Weight: 1,1 kg

SUPPORT BEARING • Suitable for support legs 17460-OK and VK • Weight: 7,0 kg

17464OK

SUPPORT BEARING, RIGHT SIDE

17464VK

SUPPORT BEARING, LEFT SIDE

17464-OK

151

17464-VK

E-7


E-7 №

SUPPORT LEGS Product name LOCKING DEVICE FOR SUPPORT LEG • • • • • • •

Materials: body cast iron, other parts out of steel, galvanized bolt Includes grease nipple Ready for installation Finishing: primed Welding attachment Grease before use Weight: 1,2 kg

25300

LOCKING DEVICE 20 MM

25302

LOCKING DEVICE 25 MM

25300

152

25302


SWAP BODY HOOKS №

Product name

16266

TIPPER ROLLER Ø 200 MM • • • •

Material: untreated steel Roll: Ø 200 mm No grease nipple Weight: 18,8 kg

COUPLING JAW LEKO • • • • • • •

17300

Made out of cast iron Attaching the towbar with flange Maximum permissible traction force 108 kN (11 t) Boom angle max 22° vertically and horizontally up to 215° Pin in hardened steel Ø 40 mm Finishing: primed Weight: 13,2 kg

COUPLING JAW LEKO-11 • Hole spacing 160 x 100 mm, Ø 20,5 mm

17305

COUPLING JAW LEKO-11, SISU/MB • Hole spacing 140 x 80 mm, Ø 17,0 mm

17313

PIN FOR HOULING HOOK L-11 • Includes chain and locking pin • Material: galvanized steel • Weight: 1,7 kg

153

E-7


E-7 №

SWAP BODY HOOKS Product name

STEEL WIRE 17420

STEEL WIRE 12 T • • • •

17422

Max. load: 12t Length: 7,7 m Wire Ø 13 mm Weight: 6,0 kg

STEEL WIRE 16 T • • • •

Max. load: 16 t Length: 9,0 m Wire Ø 14 mm Weight: 8,2 kg

STEEL WIRE 20 T • Max. load: 20 t • Wire Ø 16 mm

17423

STEEL WIRE 20 T - 9,8 M • Length: 9,8 m • Weight: 11,3 kg

17426

STEEL WIRE 20 T - 11,8 M • Length: 11,8 m • Weight: 13,6 kg

17424

STEEL WIRE 18 T/1,5 M • • • •

Max. load: 18 t Length: 1,5 m Wire Ø 16 mm Weight: 2,5 kg

154


SWAP BODY HOOKS № 17400

E-7

Product name SWAP BODY HOOK, CASTED • Fastening with M16 bolts • Finishing: primed • Weight: 2,0 kg

17402

SWAP BODY HOOK, WELD-ON • Welding attachment • Weight: 2,0 kg

WIRE CABLE GUIDE, CASTED • Fastening with M16 bolts • Finishing: primed • Weight: 3,0 kg

17403

WIRE CABLE GUIDE, R/H • Right-hand

17404

WIRE CABLE GUIDE, L/H • Left-hand

Note! This image can be suited as mirror image also for product 17404.

17403

17404

155


E-8 №

WHEEL CHOCKS AND HOLDERS Product name

WHEEL CHOCK WHEEL CHOCK, GALVANIZED STEEL 17130

WHEEL CHOCK 6720/360 MM • 15” tyre • Width: 120 mm • Weight: 1,9 kg

17133

17130

WHEEL CHOCK 6721/460 MM • 19,5” tyre • Width: 160 mm • Weight: 2,9 kg

17136

17133

WHEEL CHOCK 6722/560 MM • 22,5” tyre • Width: 200 mm • Weight: 3,9 kg

17136 17134

WHEEL CHOCK R460 MM, RUBBER • Width: 150 mm • Weight: 4,2 kg

17134 WHEEL CHOCK, PLASTIC • 22,5” tyre • Width: 200 mm • Weight: 1,7 kg

17137

WHEEL CHOCK R560 MM • Color: black

17138

17137, 17138

WHEEL CHOCK R560 MM • Color: yellow

156


E-8

WHEEL CHOCKS AND HOLDERS №

Product name

HOLDER FOR WHEEL CHOCK HOLDER FOR WHEEL CHOCK, STEEL • Material: painted steel • Color: black

Product name

Suitable for:

A

B

C

D

E

F

G

17140 17143 17146

Holder 6730/360 mm Holder 6731/460 mm Holder 6732/560 mm

17130 (15”) 17133 (19,5”) 17136 (22,5”)

225 250 290

164 215 257

70 85 120

144 185 230

40 60 80

8,5 8,4 8,5

124 164 206

17139

HOLDER FOR WHEEL CHOCK, PLASTIC • Fastening with M14 bolts • Cmax = 25 N • Weight: 0,2 kg

157

Weight (kg) 0,6 0,9 1,4


â„–

Product name

158


F GAS SPRINGS GAS SPRING ACCESSORIES F-1 GAS SPRINGS F-2


F-1 №

GAS SPRING ACCESSORIES Product name GAS SPRING ACCESSORIES

74860

ASSEMBLY KIT 2860 • Suitable for gas springs with measurement 3D=8 mm • Material: aluminium, stainless steel • Weight: 0,2 kg

74870

BALL JOINT M8 • • • •

Suitable for gas springs with measurement D2=10 mm Material: steel Finishing: galvanized Weight: 0,2 kg

160


GAS SPRINGS №

Product name GAS SPRINGS Suitability: • The gas spring should not be subjected to transverse load. • If possible, the maximum load capacity of the gas spring should not be fully utilized. • If desired to re-paint the gas spring, the piston rod should be covered properly. • Do not use solvents upon purification. • Assembly kit (74860) and ball joint (74870) can be found from Gas spring accessories F-1. Installation: • Gas springs should be installed the piston rod facing downward. • The piston rod must be protected against voltage fluctuations, welding and grinding sparks, oxidizing chemicals and paints. • Never grap the rod with pliers or in a vice without using protective lead, aluminium or copper jaws. Operating conditions: • Operating temperature: -30ºC – +80ºC • Maximum number of cycles (full reciprocating motion)/min: 5 pcs Storing before use: • Gas springs can be stored horizontally at ambient temperature for up to three months. • For long-term storage gas springs must be stored vertically with the rod pointing down.

F (N)

A

B

A-B

D1

D2

D3

74809

150

345

240

105

22

10

8

0,30

74810 74811 74812 74813 74814 74820 74821 74822 74824 74826 74828 74829 74830 74831

250 250 400 300 650 250 350 500 650 750 1000 1230 350 250

445 345 445 405 445 503 503 503 503 503 503 503 650 650

295 240 295 255 295 303 303 303 303 303 303 303 400 400

150 105 150 150 150 200 200 200 200 200 200 200 250 250

22 22 22 18 22 22 22 22 22 22 22 22 22 22

10 10 10 8 10 10 10 10 10 10 10 10 10 10

8 8 8 8 8 8 8 8 8 8 8 8 8 8

0,46 0,46 0,46 0,46 0,46 0,50 0,50 0,40 0,50 0,50 0,50 0,50 0,62 0,62

161

Weight (kg)

F-2


F-2 №

GAS SPRINGS Product name GAS SPRINGS

F (N)

A

B

A-B

D1

D2

D3

Weight (kg)

74832 74834 74835 74836 74837 74838 74839 74840 74841 74842 74843 74844 74846 74848 74850 74851 74852 74853

500 750 350 1000 300 500 700 900 700 400 450 750 1000 1250 1500 750 1000 1500

650 650 650 650 600 600 600 600 700 600 600 750 750 750 750 900 900 900

400 400 400 400 350 350 350 350 450 350 350 450 450 450 450 500 500 500

250 250 250 250 250 250 250 250 250 250 250 300 300 300 300 400 400 400

22 22 22 22 22 22 22 22 22 22 22 28 28 28 28 28 28 28

10 10 10 10 10 10 10 10 10 10 10 14 14 14 14 14 14 14

8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10

0,62 0,62 0,62 0,62 0,62 0,62 0,62 0,55 0,55 0,55 0,55 0,62 0,65 0,65 0,62 1,34 1,34 1,34

162


GAS SPRINGS №

Product name GAS SPRING FORCE CALCULATION FORMULA • F = door weight (N) • L = door center distance from hinge • b = gas spring distance from hinge • Gas spring force = F x L b Example: • Door weight = 38 kg (380 N) • Door center distance from hinge = 500 mm • Gas spring distance from hinge = 200 mm Gas spring force = 380 x 500 = 950 N 200 Needed: 1 pc of 1000 N or 2 pcs of 500 N gas springs

RECOMMENDED INSTALLATION DISTANCE

Overall length (mm)

o = mm

445 503 650 750

125 155 200 245

163

F-2


â„–

Product name

164


G HINGES CONTINUOUS HINGE ELEMENTS G-1 DOOR HINGES G-2 DROPSIDE HINGES G-3 HINGE PINS FOR DROPSIDE HINGES G-4


G-1 №

CONTINUOUS HINGE ELEMENTS Product name TEHO-BELT

• • • • • • • •

Supplied by the meter, wholesale packaging 50 m Surface of the belt has been rubberized to increase friction Rubber products should not come into contact with solutions or semi-solid materials In particular, beware of solvents, volatile substances, oils and fats Elongation at break over 10% Width tolerance ± 2 mm Strength tolerance ± 0,3 mm Heat resistance -35 –­ +80 °C

Cleaning: • When cleaning vulcanized rubber products it is recommended to use neutral washing solution. • It is prohibited to use solvents, such as trichlorethylene, carbon tetrachloride or hydrocarbons. • The purified products are allowed to dry at room temperature.

41825

TEHO-BELT 160-63 • Width: 63 mm • Strength: 2,9 mm • Weight: 0,84 kg/m

41828

TEHO-BELT 200-44 • Width: 44 mm • Strength: 3,8 mm • Weight: 0,36 kg/m

41830

TEHO-BELT 200-63 • Width: 63 mm • Strength: 3,8 mm • Weight: 0,36 kg/m

41835

TEHO-BELT 200-80 • Width: 80 mm • Strength: 3,8 mm • Weight: 1,43 kg/m

41840

TEHO-BELT 200-120 • Width: 120 mm • Strength: 3,8 mm • Weight: 2,15 kg/m

166


CONTINUOUS HINGE ELEMENTS №

Product name

TE ALU CONTINUOUS HINGE TE-200 ALU CONTINUOUS HINGE • • • • • • • •

Suitable for heavy doors, hinge turnability 180° Seals the whole way along the hinge Completely maintenance-free Fastening to door and wall structures from the drilling groove Max. fastening dot pitch 100 mm Material: anodized aluminium/fabric-reinforced flat belt - No surface treatment necessary Perforating: Ø 6 mm, hole spacing 100 mm Belt locking

41859-S CONTINUOUS HINGE 2600 • Weight: 4,1 kg

41860-S CONTINUOUS HINGE 2800 • Weight: 4,5 kg

41862-S CONTINUOUS HINGE 3000 • Weight: 4,9 kg

41863-S CONTINUOUS HINGE 3100 • Weight: 5,0 kg

41864-S CONTINUOUS HINGE 3200 • Weight: 5,1 kg

41865-S CONTINUOUS HINGE 3300 • Weight: 5,2 kg

41866-S CONTINUOUS HINGE 3500 • Weight: 5,5 kg

Against frame

41868-S CONTINUOUS HINGE 3600 • Weight: 5,8 kg

41869-S CONTINUOUS HINGE 4000 • Weight: 6,4 kg

41857-S CONTINUOUS HINGE 5750 • Weight: 9,0 kg

167

G-1


G-1 №

CONTINUOUS HINGE ELEMENTS Product name TE-160 ALU CONTINUOUS HINGE

• • • •

Hinge turnability 180° Max. fastening dot pitch 100 mm Material: anodized aluminium/fabric-reinforced flat belt No surface treatment necessary

41870-S CONTINUOUS HINGE 2000 • Weight: 2,6 kg

41872-S CONTINUOUS HINGE 2300 • Weight: 3,0 kg

41874-S CONTINUOUS HINGE 2510 • Weight: 3,3 kg

41876-S CONTINUOUS HINGE 2800

Against frame

• Weight: 3,7 kg

41878-S CONTINUOUS HINGE 3050 • Weight: 4,0 kg

41882-S CONTINUOUS HINGE 3400 • Weight: 4,5 kg

41920

RIMFLEX CONTINUOUS HINGE, 3000 MM • • • • • • • • •

RIMFLEX element is designed for lightweight doors hinged at the top edge As building materials are two rigid PVC profiles joined with the elastic polymer (elastomer) Turnability 180 ° Seals along the entire length Completely maintenance-free Operating temperature: -40 – +50 °C Manufacturing length: 3000 mm UV-resistant Weight: 2,1 kg

168


CONTINUOUS HINGE ELEMENTS №

Product name CONTINUOUS TMT HINGE (PU) • • • • • •

41902

Material: anodized aluminium/polyurethane Screw mounting, perforated Ø 5 mm / 100 mm Completely maintenance-free Turnability 180° Cold tested in -36° C Max. tension allowed on the joint 10 N/mm²

CONTINUOUS HINGE 2400 • Weight: 3,7 kg

41904

CONTINUOUS HINGE 2700 • Weight: 4,3 kg

41905

CONTINUOUS HINGE 3000 • Weight: 4,6 kg

41912

Against frame

CONTINUOUS HINGE 3300 • Weight: 5,0 kg

41908

CONTINUOUS HINGE 3600 • Weight: 5,1 kg

41910

CONTINUOUS HINGE 4000 • Weight: 5,7 kg

169

G-1


G-2

DOOR HINGES

Product name

41401

DOOR HINGE FG-115 ZP • Material: electrogalvanized steel • Weight: 0,20 kg

DOOR HINGE TMT-105 • Openability 180°

41402

DOOR HINGE TMT-105, SS • Material: stainless steel AISI 304 • Weight: 0,40 kg

41403

DOOR HINGE TMT-105 ZP • Material: electrogalvanized steel • Weight: 0,20 kg

170


DOOR HINGES №

Product name DOOR HINGE FG-130 • Weight: 0,16 kg

41404

DOOR HINGE FG-130 SS • Material: stainless steel

41405

DOOR HINGE FG-130 ZP • Material: electrogalvanized steel

41407

DOOR HINGE FG-108 ZP • Material: electrogalvanized steel • Weight: 0,14 kg

171

G-2


G-2 №

DOOR HINGES Product name DOOR HINGE 1012

• • • •

41408

Cardan shaft with ball bearing Grease nipple, locking rings out of brass Openability 180° Weight: 0,56 kg

DOOR HINGE 1012 • Material: primed

41409

DOOR HINGE 1012 ZP • Material: electrogalvanized steel

41408

41409

P&L DOOR HINGE 30 • Openability 180°

41410

P&L DOOR HINGE 30 SS • Material: stainless steel • Pastore&Lombardi-kod: 070820809A • Weight: 0,15 kg

41411

P&L DOOR HINGE 30 ZP • Material: galvanized steel • Pastore&Lombardi-kod: 070920810A • Weight: 0,14 kg

41410 41411

172


DOOR HINGES №

Product name DOOR HINGE TMT-140 • Weight: 0,43 kg

41418

DOOR HINGE TMT-140 SS • Material: stainless steel

41419

DOOR HINGE TMT-140 ZP • Material: electrogalvanized steel

41421

DOOR HINGE FG-185 ZP • Material: electrogalvanized steel • Weight: 0,89 kg

173

G-2


G-2

DOOR HINGES

Product name

41423

DOOR HINGE FG-80 X 120 ZP • Material: electrogalvanized steel • Weight: 0,53 kg

41636

P&L HINGE 118 SS • • • •

Material: stainless steel Openability 180° Pastore&Lombardi code: 070822043A Weight: 0,51 kg

174


DOOR HINGES №

Product name

41500

P&L REAR HINGE 258 SS • • • • •

41503

Material: stainless steel AISI 304 Bolt mounting Openability 270° Pastore&Lombardi code: 070122685C Weight: 1,3 kg

HINGE BRACKET 262 ZP, WELD-ON - NARROW • Suitable for 262 model rear hinges 41504 and 41505 • Material: electrogalvanized steel • Weight: 0,18 kg

41504 41505

175

G-2


G-2 №

DOOR HINGES Product name REAR HINGE FG-262

• Compatible hinge brackets: 262 model brackets • Weight: 0,92 kg

41504

41503 41506 41509 41510

REAR HINGE FG-262 SS • Material: stainless steel

41505

REAR HINGE FG-262 ZP • Material: electrogalvanized steel

41504, 41505

176


DOOR HINGES № 41506

Product name HINGE BRACKET 262 SS, WELD-ON • Suitable for 262 model rear hinges 41504 and 41505 • Material: stainless steel • Weight: 0,27 kg

41504 41505

41509

HINGE BRACKET 262 SS, BOLT-ON - SLANTED • Suitable for 262 model rear hinges 41504 and 41505 • Material: stainless steel • Weight: 0,38 kg

41504 41505

177

G-2


G-2

DOOR HINGES

Product name

41510

HINGE BRACKET 262 SS, WELD ON - SLANTED • Suitable for 262 model rear hinges 41504 and 41505 • Weight: 0,25 kg

41504 41505

41511

HINGE PIN 262 SS, M10 • • •

Suitable for 262 model rear hinges 41504 and 41505 Material: stainless steel Weight: 0,09 kg

41504 41505

41514

HINGE BRACKET 262 SS, WELD-ON - NARROW • Suitable for 262 model rear hinges 41504 and 41505 • Material: stainless steel • Weight: 0,19 kg

41504 41505

178


DOOR HINGES №

Product name REAR HINGE FG-220 • Compatible hinge brackets: 220 model brackets • Weight: 0,56 kg

41516

41518 41519

REAR HINGE FG-220 SS • Material: stainless steel

41517

REAR HINGE FG-220 ZP • Material: galvanized steel

179

G-2


G-2 №

DOOR HINGES Product name HINGE BRACKET 220, WELD-ON

• Suitable for 220 model rear hinges 41516 and 41517 • Weight: 0,10 kg

41516 41517 41518

HINGE BRACKET 220 SS • Material: stainless steel

41519

HINGE BRACKET 220 ZP • Material: electrogalvanized steel

41521

HINGE PIN+NUT 220 ZP • • •

Suitable for 220 model rear hinges 41516 and 41517 Material: galvanized steel Weight: 0,08 kg

41516 41517

41610

P&L REAR HINGE 260 SS • • • • • • •

Compatible hinge brackets: 260 model brackets Pastore&Lombardi code: 070120783 Material: stainless steel Equipped with plastic bushings Openability 270° Bolt mounting Weight: 0,86 kg

41606 41609

180


DOOR HINGES №

Product name HINGE BRACKET KIT DMG-260 SS • Suitable for 260 model rear hinge 41610 • Material: stainless steel AISI 304 • Hinge pin and nut are included in the delivery

41610 41606

HINGE BRACKET KIT, WELD-ON • Weight: 0,33 kg

41609

HINGE BRACKET KIT, BOLT-ON • Weight: 0,53 kg

41606

41609

41610-1 HINGE BUSHING DMG • Weight: 0,01 kg • Suitable for product 41610

41610

181

G-2


G-2

DOOR HINGES

Product name

41612

P&L DOOR HINGE 117 SS • • • •

41618

Material: stainless steel Openability 180° Pastore&Lombardi code: 070822750B Weight: 0,16 kg

P&L DOOR HINGE 132 SS • • • •

Material: stainless steel Openability 180° Pastore&Lombardi code: 070822013A Weight: 0,44 kg

182


DOOR HINGES №

Product name

41620

P&L DOOR HINGE 165 SS • • • •

41624

Material: stainless steel Openability 180° Pastore&Lombardi code: 070822017A Weight: 0,43 kg

DOOR HINGE 185 SS • • • •

Material: stainless steel AISI 304 Bronze/PTFE joint surfaces Openability 180° Weight: 0,73 kg

183

G-2


G-2

DOOR HINGES

Product name

41626

P&L REAR HINGE 320, SS - WELD-ON • • • • • • •

41627

Material: stainless steel Equipped with plastic bushings Openability 270° Weld-on hinge bracket Includes a hinge bracket and a hinge pin Pastore&Lombardi code: 070116351A Weight: 1,47 kg

P&L HINGE BUSHING FOR HINGE 41626 • Weight: 0,01 kg • Suitable for product 41626 • Pastore&Lombardi code: 071915260

41626

41628

DMG HINGE BRACKET+PIN FOR HINGE 41626 • Weight: 0,30 kg • Suitable for product 41626

41626

184


DOOR HINGES №

Product name

41629

REAR HINGE TMT-320-ZP, COMPLETE • • • • • •

41632

Material: galvanized steel Equipped with plastic bushings Openability 270° Weld-on hinge bracket Includes hinge bracket and a hinge pin Weight: 1,45 kg

REAR HINGE DMG-244 SS, COMPLETE • • • • • •

Material: stainless steel AISI 304 Equipped with plastic bushings Openability 270° Weld-on hinge bracket Includes hinge bracket and a hinge pin Weight: 0,60 kg

185

G-2


G-3 №

DROPSIDES HINGES

Product name DROPSIDE HINGE 220 AL • Compatible hinge pins can be found from Hinge pins for dropside hinges section G-4 • Material: aluminium

41340-41345 41301

DROPSIDE HINGE 220 AL • Weight: 0,32 kg

41303

DROPSIDE HINGE 220 AL/AN • Anodized • Weight: 0,32 kg

41300

DROPSIDE HINGE 220 AL, PERFORATED • Bolt mounting, M8 DIN 7991 • Weight: 0,31 kg

41302

DROPSIDE HINGE 220 AL/AN, PERFORATED • Bolt mounting, M8 DIN 7991 • Anodized • Weight: 0,31 kg

41301, 41303

41300, 41302

186


DROPSIDES HINGES №

Product name DROPSIDE HINGE 146, ANODIZED • • • •

Compatible with hinge bushings 41348 and 41349 Installation dimension: 69 mm from the lower edge of the dropside to the middle of the hinge pin Material: anodized aluminium/stainless steel Bolt mounting, M8 DIN 7991

41348 41349

Suitable for dropside profiles: • 33182 • 33183

41305

DROPSIDE HINGE 146, LONG - L/H • Left-handed dropside hinge with long pin • Weight: 0,58 kg

41307

DROPSIDE HINGE 146, LONG - R/H • Right-handed dropside hinge with long pin • Weight: 0,58 kg

41309

DROPSIDE HINGE 146, SHORT - L/H • Left-handed dropside hinge with short pin • Weight: 0,55 kg

41311

DROPSIDE HINGE 146, SHORT - R/H • Right-handed dropside hinge with short pin • Weight: 0,55 kg

187

G-3


G-3 №

DROPSIDES HINGES

Product name DROPSIDE HINGE 132, ANODIZED • • • •

Compatible with hinge bushings 41348 and 41349 Installation dimension: 54 mm from the lower edge of the dropside to the middle of the hinge pin Material: anodized aluminium/stainless steel Bolt mounting, M8 DIN 7991

41348 41349

Suitable for dropside profiles: • 33182 • 33183

41313

DROPSIDE HINGE 132, LONG - L/H • Left-handed dropside hinge with long pin • Weight: 0,55 kg

41315

DROPSIDE HINGE 132, LONG - R/H • Right-handed dropside hinge with long pin • Weight: 0,55 kg

41317

DROPSIDE HINGE 132, SHORT - L/H • Left-handed dropside hinge with short pin • Weight: 0,52 kg

41319

DROPSIDE HINGE 132, SHORT - R/H • Right-handed dropside hinge with short pin • Weight: 0,52 kg

188


DROPSIDES HINGES №

Product name DROPSIDE HINGE 320 • • • •

Compatible hinge pins can be found from Hinge pins for dropside hinges section G-3 Material: hot-dip galvanized steel Bolt mounting, M8 DIN 7991 Weight: 0,88 kg

41340-41345

41321

DROPSIDE HINGE 320 S

41322

DROPSIDE HINGE 320 AS

41321

41322

41323

41325

• Hinge with external bushing

41323

DOOR HINGE 320 TAS • Bent rear dropside hinge with larger bending

41325

DROPSIDE HINGE 320 BS • Hinge with internal bushing

41329

DROPSIDE HINGE 320 BAS • Hinge with internal bushing

41329

189

G-3


G-3 №

DROPSIDES HINGES

Product name DROPSIDE HINGE 14506 • • • •

Compatible hinge pins 41340 and 41341 can be found from Hinge pins for dropside hinges section G-4 Material: aluminium Bolt mounting, M8 DIN 7991 Weight: 0,19 kg

41334

DROPSIDE HINGE 14506 ALU

41335

DROPSIDE HINGE 14506 ALU AN

41340 41341

• Anodized

41348

HINGE BUSHING 57 X 25 X 3,6 • • • •

41349

HINGE BUSHING 45 X 30 X 6,25 • • • •

41718

Material: untreated steel Wall thickness: 3,6 mm Weldable Weight: 0,11 kg

Material: untreated steel Wall thickness: 6,25 mm Weldable Weight: 0,16 kg

DROPSIDE HINGE 90 AS • • • •

Pin and socket are galvanized steel Stainless steel counter plate Screws for counter plate are not included Weight: 0,4 kg

Fastening holes: • pin M8x25 DIN 7991 • counter plate M8x25 DIN 7991 • socket M8 DIN 7991

190


DROPSIDES HINGES №

Product name

41720

DROPSIDE HINGE 90 DACROMET • • • • • •

Dropside hinge with DACROMET finish Good installability, does not form an electrochemical pair with aluminum Includes counter plate Screws for counter plate are not included Paintable Weight: 0,39 kg

Fastening holes: • pin M8x25 DIN 7991 • counter plate M8x25 DIN 7991 • socket M8 DIN 7991

41720T1

41720T2

41723

PIN FOR DROPSIDE HINGE 90 DACROMET • Fastening holes: M8x25 DIN 7991 • Weight: 0,22 kg

SOCKET FOR DROPSIDE HINGE 90 DACROMET • Fastening holes: M8 DIN 7991 • Weight: 0,17 kg

DROPSIDE HINGE 120 AS Material: • pin: hot-dip galvanized steel • socket: untreated steel • plate: electrogalvanized steel • Includes counter plate • Screws for counter plate are not included • Weight: 0,94 kg Fastening holes: • pin M8x25 DIN 912 • counter plate M8x25 DIN 912 • socket M8 DIN 7991

191

G-3


G-4 №

HINGE PINS FOR DROPSIDE HINGES

Product name HINGE PIN 16 MM • Material: untreated steel

41340

41340

HINGE PIN 16 MM - SHORT • Weight: 0,16 kg

41341

HINGE PIN 16 MM - LONG 41341

• Weight: 0,18 kg

41342

HINGE PIN 16 MM - HIGH • Weight: 0,27 kg

41342 HINGE PIN 16 MM SS • Material: stainless steel

41344

HINGE PIN 16 MM SS - SHORT • Weight: 0,16 kg

41345

41344

HINGE PIN SS 16 MM - LONG • Weight: 0,20 kg

41345

41340, 41344

41341, 41345

41342

192


H LIGHTS AND LIGHTING SYSTEMS FASTENERS FOR POSITION LIGHTS H-1 JUNCTION BOXES AND WIRES H-2 LIGHT ACCESSORIES H-3 LIGHT CONSOLES H-4 LIGHTS H-5 P-LIGHT SYSTEMS H-6 REFLECTORS H-7


H-1 №

FASTENERS FOR POSITION LIGHTS

Product name FASTENER FOR POSITION LIGHTS • Material: hot-dip galvanized steel • Places for two position lights • Weight: 2,6 kg

15008OK

FASTENER R/H

15008VK

FASTENER L/H

15008-OK

194


FASTENERS FOR POSITION LIGHTS № 50560

H-1

Product name MARKER LIGHT ASSEMBLY, FRONT • Fastening to Ø 42 mm pipe • Delivered as pairs L/H and R/H • Weight: 0,4 kg Delivery content: • lights to front and side (531174-230 and 531174-330) • guard plate (50560-3) • clamp (15020) • brackets (50560-1 ja 50560-2)

50560-1 BRACKET FOR MARKER LIGHTS, FRONT-R/H • Weight: 0,2 kg

50560-2 BRACKET FOR MARKER LIGHTS, FRONT-L/H • Weight: 0,2 kg

50560-1

50560-3 POLYCARBONATE GUARD • Weight: 0,1 kg

195

50560-2


H-1 №

FASTENERS FOR POSITION LIGHTS

Product name ASSEMBLY ARM • • • • • •

Material: galvanized steel Length: 385 mm Vertically adjustable: 0-90° Holder 63233 included Lights and reflectors are sold separately Weight: 2,2 kg

63230

ASSEMBLY ARM 1187 L/H

63231

ASSEMBLY ARM 1189 R/H

63233

LIGHT HOLDER FOR ASSEMBLY ARM • Material: aluminium • Size: 120 x 490 mm • Weight: 0,5 kg Suitable for products: • 63230 • 63231

63236RST

ASSEMBLY ARM, SS • Material: stainless steel • Lights and reflectors are sold separately • Weight: 7,50 kg

196


JUNCTION BOXES AND WIRES №

Product name

50330

CABLE KIT AMP, 4 M • • • •

51660

JUNCTION BOX ADR/16 FITTINGS • • • • • • • • • •

51708

Proplast code: 50120000 Cable length: 4,0 m With AMP-coupling Weight: 0,75 kg

For GGVS / ADR use TÜV approved: TÛ.EGG.028-96 IP69K Material: PA 6 GF 30 Removable connector block: flat pin 11x8 + 8x4 The lid sealed with tape or screws (4) Dimensions 167 x 157 x 99 mm Installation: 4 Ø 5,5 mm, spacing 65/110 mm 16 pcs. PG-boxes: 10xPG9, 5xPG13.5, 1xPG16 Weight: 0,89 kg

CABLE AJMY 2 X 1.0 • Length: 50 m • Weight: 0,05 kg/m

51710PU

CABLE AJ 1.5 RED • Length: 100 m • Weight: 0,02 kg/m

CABLE AJMY 2 X 1.5 • Length: 50 m • Weight: 0,06 kg/m

51712MU

AJMY 2 X 1.5 BLACK

51712PU

AJMY 2 X 1.5 RED

51712VA

AJMY 2 X 1.5 VIT

197

H-2


H-2

JUNCTION BOXES AND WIRES

Product name

51713

CABLE AJMY 2 X 2.5 • Length: 50 m • Weight: 0,08 kg/m

51714

CABLE AJMY 3 X 1.5 • Length: 100 m • Weight: 0,09 kg/m

51716

CABLE AJMY 4 X 1.5 • Length: 100 m • Weight: 0,11 kg/m

51718

CABLE AJMY 5 X 1.5 • Length: 100 m • Weight: 0,14 kg/m

51720

CABLE AJMY 5 X 1.5 + 2 X 2.5 • Length: 100 m • Weight: 0,22 kg/m

51721

CABLE AJMY 6 X 1.5 + 5 X 2.5 • Sold by meter • Weight: 0,22 kg/m

51723

CABLE AJMY 7 X 1.5 • Length: 100 m • Weight: 0,18 kg/m

51724

BLACK AJMY 8 X 1.5 + 5 X 2.5 • Length: 50 m • Weight: 0,38 kg/m

198


JUNCTION BOXES AND WIRES №

Product name ADR-CABEL • Color: black • Length: 50 m

51750

ADR-CABEL 2 X 1 • Weight: 0,05 kg/m

51752

ADR-CABEL 6 X 1 + 1 X 2 • Weight: 0,02 kg/m

51755

ADR-CABEL 9 X 1 + 1 X 2 • Weight: 0,22 kg/m

199

H-2


H-3 №

LIGHT ACCESSORIES

Product name SPARE GLASS FOR RUBBER ARM LIGHT • Suitable for rubber arm lights 50580, 50582 and 50593 • Weight: 0,03 kg

50585

SPARE GLASS A 60 MM, RED

50586

SPARE GLASS B 60 MM, WHITE

50588

SPARE GLASS C 60 MM, ORANGE

50589

LAMP SOCKET FOR RUBBER ARM LIGHT • Suitable for rubber arm lights 50580 and 50582 • Weight: 0,01 kg

SPARE LED UNIT FOR RUBBER ARM LIGHT • Suitable for rubber arm lights 50580, 50582 and 50593 • Cable length: 5,0 m • Weight: 0,22 kg

50595

A, RED

50596

B, WHITE

50597

C, ORANGE

200


LIGHT ACCESSORIES №

H-3

Product name ACCESSORIES FOR LED LIGHT 1174 • Suitable for all products starting with 531174

531174-010

L-BRACKET FOR LED LIGHT 1174

LED 1174 LIGHTS

• Plastic rivets included in the delivery • Weight: 0,02 kg

531174-028

SEALING FOR LED LIGHT 1174 • Weight: 0,03 kg

532700-32

PLASTIC RIVET 6 X 21 • Weight: 0,001 kg

531230-011

SPARE GLASS 12301 AC • Color: red, orange • Suitable for light 11301/AC (531130-001) • Weight: 0,07 kg

531130-001

531240-001

SPARE GLASS 1240 • Suitable for light 1140 (531140-000) • Weight: 0,03 kg

531140-000

531257-001

SPARE GLASS 1171 • Suitable for light 1171 (531171-101) • Weight: 0,04 kg

531171-101

531273-001

SPARE GLASS 1273 • Spare glass for lights 1173, e.g. for product 531173-001 • Weight: 0,52 kg

531173-001

201


H-4 №

LIGHT CONSOLES

Product name LIGHT CONSOLE TMT 2015 • End pieces and fastening plates are included in the delivery

37213-B LIGHT CONSOLE FRAME TMT 2015 • • • • • •

37213FT

1 pc. lamp console frame 2 pcs. plastic end pieces Stainless steel fasteners for position lights Attachment plates Background plate Weight: 15,0 kg

LIGHT CONSOLE TMT 2015 FT • Weight: 23,0 kg Includes: • 1 pc. console frame 37213-B • 4 pcs. parking light/brake light/indicator (LED) 50113 • 1 pcs. parking light/fog light (LED) 50111 • 1 pcs. parking light/reversing light (LED) 50112 • 2 pcs. license plate lamp (LED) 50026 • 2 pcs. clearance light (LED) 50009 • 1 pc. junction box ADR/16L 51660

37213PC

LIGHT CONSOLE TMT 2015 PC • Weight: 22,0 kg Includes: • 1 pc. console frame 37213-B • 2 pcs. rear combination lamp (LED) 50332 and 50334 • 2 pcs. license plate lamp (LED) 50480 • 2 pcs. clearance light (LED) 50599 • 1 pc. junction box ADR/16L 51660

202


LIGHT CONSOLES №

Product name COMBI LIGHT CONSOLE • End pieces and fastening plates are included in the delivery

37217-B COMBI LIGHT CONSOLE FRAME • • • • • •

37217FT

1 pc. lamp console frame 2 pcs. plastic end pieces Stainless steel fasteners for position lights Attachment plates Background plate Weight: 22,0 kg

COMBI LIGHT CONSOLE FT • Mudflap is sold separately • Weight: 28,2 kg Includes: • 1 pc. combi console frame 37217-B • 4 pcs. parking light/brake light/indicator (LED) 50113 • 1 pcs. parking light/fog light (LED) 50111 • 1 pcs. parking light/reversing light (LED) 50112 • 2 pcs. license plate lamp (LED) 50026 • 2 pcs. clearance light (LED) 50009 • 1 pc. junction box ADR/16L 51660

37217PC

COMBI LIGHT CONSOLE PC • Weight: 27,2 kg Includes: • 1 pc. console frame 37217-B • 2 pcs. rear combination lamp (LED) 50332 and 50334 • 2 pcs. license plate lamp (LED) 50480 • 2 pcs. clearance light (LED) 50599 • 1 pc. junction box ADR/16L 51660

203

H-4


H-4 №

LIGHT CONSOLES

Product name LIGHT CONSOLE DOUBLE HEIGHT TMT • End pieces and fastening plates are included in the delivery • Width: 2412 mm • Height: 400 mm • Depth: 100 mm

37219-B LIGHT CONSOLE FRAME DOUBLE HEIGHT • • • • • •

37219FT

1 pc. lamp console frame 2 pcs. plastic end pieces Stainless steel fasteners for position lights Attachment plates Background plate Weight: 15,0 kg

LIGHT CONSOLE DOUBLE HEIGHT FT • Length sign and reflectors are sold separately • Weight: 24,2 kg Includes: • 1 pc. light console 37219-B • 8 pcs. parking light/brake light/indicator (LED) 50113 • 2 pcs. parking light/fog light (LED) 50111 • 2 pcs. parking light/reversing light (LED) 50112 • 2 pcs. license plate lamp (LED) 50026 • 2 pcs. clearance light (LED) 50009 • 1 pc. junction box ADR/16L 51660

37204

CONSOLE FOR LIGHTS 2435 • Length: 2450 mm • Weight: 15,0 kg Includes: • profile • cable tray cover plate • 2 pcs. end-pieces + fastening screws

37211

PLASTIC END FITTING C • Weight: 0,3 kg Suitable for products: • 37204 • 37205

204


INTERIOR LIGHTING №

Product name

50606

TMT INTERIOR LIGHT LED, RECESSED • • • • • • • • • • •

50607

Suitable for transport cargo space interior lighting 6x3 effectively grouped LEDs IP 66, EMC-protected 12 V / 4 W = 0,33 A 24 V / 4 W = 0,14 A Luminous flux: 600 lm (max) Color temperature: white (4000 K) Theoretical operating time: 50 000 h Installation hole: 20 x 140 mm Diameter: 180 mm Weight: 0.25 kg

TMT INTERIOR LIGHT LED, SURFACE-MOUNTING • • • • • • • • • • • • •

Suitable for transport cargo space interior lighting 6x3 effectively grouped LEDs IP 66, EMC-protected 12 V / 4 W = 0,33 A 24 V / 4 W = 0,14 A Luminous flux: 600 lm (max) Color temperature: white (4000 K) Theoretical operating time: 50 000 h Surface-mounting Opal polycarbonate glass Height: 12 mm Diameter: 160 mm Weight: 0,25 kg

50034-B INTERIOR LAMP FT-034 B LED, WHITE • • • • • • • • •

Changeable polarity Shockproof, PC lampshade EMC certification, electromagnetic compatibility Color: white Input voltage: 12-36V DC Working temperature: -40 °C – + 55 °C Power consumption: 12 V / 24 V = 0,3 A / 0,15 A Power consumption (nominal): 3,6 W Weight: 0,13 kg

205

H-5


H-5

INTERIOR LIGHTING

Product name

50602

TMT LIGHT SWITCH Functions: • short press (less than 2 s) switches on the lights for 15 minutes • long press (more than 2 s) switches on the lights for 30 minutes • single press and hold to turn off the lights • button has a backlight that lights while the power is switched on • • • • • • • • • •

The button has a bypass function. The light button can be controlled from the cabin with push-button, allowing the same functions to be accessed from the cabin. The button can be connected 10 pieces of TMT interior lights (50606 or 50607) Supply voltage: 9 - 32 VDC Power consumption 10 mA Load: 2,5 A max 30 W - 12 V 60 W - 24 V Operating temperature: -25 °C – +40 °C Cable length: 3 m Weight: 0,7 kg

206


INTERIOR LIGHTING №

Product name INTERIOR LIGHT FT-046 • • • • •

Luminous flux equivalent to 35 W halogen lamp, 420 lm Operating time of the light source around 50 000 hrs Color temperature: warm white Changeable polarity Weight: 0.09 kg

Certifications: • waterproof (IP68) • shockproof (K03) • Supply voltage: 12-36 V • Power rating: 5 W Power consumption: • 12 V - 0,38 A • 24 V - 0,14 A

50046B 50046S

50046ZL

FT-046 B, WHITE • White frame

FT-046 S, SILVER • Silver frame

FT-046 ZL, GOLD • Gold frame

207

H-5


H-5

LED MARKER LIGHTS

Product name REVERSING LIGHT FT-036-REV LED • • • •

Fully waterproof IP68 Electromagnetic compatibility (EMC certificate) Lightweight construction, shockproof and easy to install Weight: 0,60 kg

• Rated power: 3,5 W • Operating temperature: - 40°C - +55°C • 12-36 VDC • Power consumption: • 12 V = 0,28 A • 24V = 0,14 A

50036-REV

FT-036-REV - 2X0,75 MM² CABLE

50036-REVM25

FT-036-REV - 2,5 M CABLE

50041

REVERSING LAMP FT-041 LED • • • • • • •

Operating temperature: -40 °C – +55 °C Weather-proof and airtight Operating voltage: 12-36 VDC Power consumption: 12 V/24 V = 0,12 A/0,06 A Power consumption (nominal): 1,5 W Cable: 2x0,75 mm² Weight: 0,14 kg

208


LED MARKER LIGHTS №

H-5

Product name REAR LAMP • Color: red • Weight: 0,25 kg

531145-120

STOP LAMP 11452 A

531145-161

REAR LAMP 1145 A 531145-120

531145-161

531145-331

531145-341

FLASHER LAMP • Color: orange • Weight: 0,25 kg

531145-331

FLASHER LAMP, BACK 1145 C

531145-341

FLASHER LAMP, FRONT 11454 C

531145-120 531145-161 531145-331 531145-341

209


H-5 №

LICENSE PLATE LAMPS Product name LICENSE PLATE LAMP FT-026 LED • • • • • • •

Changeable polarity Operating time of the light source � 50 000 h 12-30 V Operating temperature: -40 °C – +55 °C Weight: 0,15 kg 12 V = (0,04 A)/0,5 W 24 V = (0,04 A)/1,0 W

50026

FT-026 - WITHOUT CABLE

50026-M25

FT-026 - 2,5 M CABLE

50480

LICENSE PLATE LAMP LED • • • • • • •

531165-401

Proplast code: 40027004 Black plastic housing Surface-mounting ADR approved Voltage: 12 / 24VDC Cable length: 0,5 m Weight: 0,25 kg

LICENSE PLATE LAMP 1165 • • • •

Black plastic housing Surface-mounting Two holes for M5 screws Weight: 0,25 kg

Bulbs: • 12 V / R10 W / BA15s • 24 V / R10 W / BA15s

210


LICENSE PLATE LAMPS №

Product name

531169-401

LICENSE PLATE LAMP 1169 • • • • •

Black plastic housing Surface-mounting The glass attachment with one Philips head screw Two holes for M6 screws Weight: 0,05 kg

Bulbs: • 12 V / C5 W / SV 8,5 • 24 V / C5 W / SV 8,5

211

H-5


H-5 №

MULTIFUNCTION LIGHTS

Product name

REAR LIGHT, LED

• • • • •

Water and dust-proof construction, hermetically sealed housing Weatherproof, -40 °C – +55 °C Supply voltage: 12-36 VDC, LED Changeable polarity Weight: 0,5 kg

REAR LIGHT FT-111 LED • Functions: rear light, fog light • Rear light: 12-24 VDC = 1,5 W/3 W • Fog light: 12-24 VDC = 3 W/6 W • Approvals: E9 ECE R38

50111 50111-M25

50111

REAR LIGHT FT-111 LED - 1,0 M CABLE

50111M25

REAR LIGHT FT-111 LED - 2,5 M CABLE

REAR LIGHT FT-112 LED • Functions: rear light, reversing light

50112 50112-M25

• Rear light: 12-24 VDC = 1,5 W/3 W • Reversing light: 12-24 VDC = 2,4 W/4,8 W • Apoprovals: E9 ECE R23

50112

REAR LIGHT FT-112 LED - 1,0 M CABLE

50112M25

REAR LIGHT FT-112 LED - 2,5 M CABLE

50113M25

REAR LIGHT FT-113 LED - 2,5 M CABLE • Functions: rear light, brake light, turn signal • Y and D approved - Suitable for serial mounting (2 or 3 lamps in a row) • E9 ja EMC approved • Rear light: 12 V/ 24 V = 0,6 W/ 1,2 W • Brake light: 12 V/ 24 V = 1 W/ 2 W • Turn signal: 12 V/ 24 V = 1 W/ 2 W

50113-M25

212

50111, 50111-M25 50112, 50112-M25


MULTIFUNCTION LIGHTS №

Product name

50032

REAR LIGHT LED FT-032, GREY • • • • • • • •

Approved maintenance free LED light Suitable for vertical and horizontal installation Brake light, rear light and turn signal Weather resistant (such as rain, frost, snow) Operating time of up to 50 000 hours Working temperature: -40 °C – +55 °C Supply voltage: 12-36V Weight: 0,34 kg

• Brake light: 12-36V = 3,0 W • Rear light: 12-36V = 0,5 W • Turn signal: 12-36V = 3,5 W

50122

REAR LIGHT FT-122 LED • Functions: brake light, rear light, turn signal • • • • • • •

Approval E9 ECE R06 / R07 Can be mounted vertically or horizontally Air-tight, weatherproof Working temperature: -40 °C – +55 °C Supply voltage: 12-36 V Cable: 1,0 m Weight: 0,26 kg

• Brake light 12 V/24 V = 1,0 W/2,0 W • Rear light 12 V/24 V = 0,75 W/1,5 W • Turn signal 12 V/24 V = 1,0 W/2,0 W

213

H-5


H-5 №

MULTIFUNCTION LIGHTS

Product name REAR LIGHT FT-130 LED • Water and dust proof design, airtight housing • Weight: 0,5 kg

50130

REAR LIGHT FT-130 LED PM • Functions: rear, brake, license plate and fog light, turn signal • • • •

50130COF

Rear light, license plate light: 12/24 V = 3,5 W/ 5,5W Brake light; 12 V/24V = 1 W/ 2 W Fog light: 12 V/24 V = 12/24 V = 1,8 W Turn signal: 12 V/ 24 V = 12/24V = 1,5 W/ 3 W

REAR LIGHT FT-130 LED COF • Functions: rear, brake, license plate and reversing light, turn signal • • • •

Rear light, license plate light: 12/24 V = 3,5 W/ 5,5 W Brake light: 12 V/ 24 V = 1 W/ 2 W Reversing light: 12/24 V = 3,6 W Turn signal: 12 V/24 V = 12/24 V = 1,5 W/ 3 W

50130

50130-COF

214


MULTIFUNCTION LIGHTS №

H-5

Product name LED REAR LAMP FT-170 TB • Functions: rear light, license plate light, brake light, fog light, reversing light, turn signal, reflector • • • • • •

E9 ja EMC approved Shock and weather-resistant Changeable polarity 12-36 V DC Operating temperarture: -40 °C - +55 °C Weight: 0,5 kg

• • • • •

Rear light + license plate light: 12 V/ 24 V = 3 W/ 5 W Brake light: 12 V/ 24 V = 1 W/ 2 W Reversing light: 12 V/ 24 V = 2,5 W/2,5 W Fog light: 12 V/ 24 V = 2 W/2 W Turn signal: 12 V/ 24 V = 1,5 W/ 3 W

50170L-TB

REAR LAMP FT-170 L TB, LEFT - 1,0 M CABLE

50170-LTB-M25

REAR LAMP FT-170 L TB, LEFT - 2,5 M CABLE

50170P-TB

REAR LAMP FT-170 P TB, RIGHT - 1,0 M CABLE

50170-PTB-M25

REAR LAMP FT-170 P TB, RIGHT - 2,5 M CABLE

50170-L-TB 50170-L-TB-M25

50170-P-TB 50170-P-TB-M25

215


H-5 №

MULTIFUNCTION LIGHTS

Product name LED REAR COMBINATION LAMP PRO-CURVE • Brake, rear, parking and fog lights, triangular reflector • • • • •

50332

ECE and ADR approvals, IP6K9K Unbreakable polycarbonate lens Waterproof housing 12/24 V-15 W Weight: 1,20 kg

50332 50336

PRO-CURVE 2,0 M CABLE, LEFT • Proplast code: 40292011

50334

PRO-CURVE 2,0 M CABLE, RIGHT • Proplast code: 40292012

50336

PRO-CURVE WITH AMP CONNECTOR, LEFT • Proplast code: 40292211

50338

PRO-CURVE WITH AMP CONNECTOR, RIGHT • Proplast code: 40292212

216

50334 50338


MULTIFUNCTION LIGHTS №

Product name

531130-001

TWO-CHAMBER LAMP 11301/AC • • • • • • •

531140-000

Turn signal, rear, brake and license plate light Suitable for right and left side, direction of turn signal upward or outward Can be used with or without license plate, when using without, lens is replaced with red spare lens (included) Screw mounting, hole spacing 45 mm, Ø 5,7 mm Color: orange, red Spare glass 531230-011 (Light accessories H-3) Weight: 0,17 kg

H-5

531230-011

3-CHAMBER LAMP 1140 • • • • • • •

Orange turn signal, red rear and brake lights Surface-mounting or embedded mounting Suitable for right and left side, installed either vertically or horizontally with the direction of the turn signal upward or outward Hole spacing 110 mm Screw mounting with two M8 screws Spare glass 531240-001 (Light accessories H-3) Weight: 0,69 kg

531240-001

217


H-5

MULTIFUNCTION LIGHTS

Product name

531171-101

3-CHAMBER LAMP 1171 • • • • • • • •

531191-357

Turn signal, rear, brake and license plate light Suitable for right and left side Direction of turn signal upward or outward Can be used with or without license plate, when using without, lens is replaced with red spare lens (included) Base plate out of grey plastic Screw mounting M6, hole spacing 45 mm Spare glass 531257-001 (Light accessories H-3) Weight: 0,23 kg

LED LIGHT 1191 24 V • • • •

Brake light, rear lights and turn signal Waterproof ADR/GGVS approved Weight: 0,40 kg

218

531257-001


MULTIFUNCTION LIGHTS №

H-5

Product name 7-CHAMBER LAMP 1173 • • • • • • • •

531173-001

Surface-mounting or embedded mounting horizontally or vertically Red rear reflector, position, rear, brake and fog lights Orange side reflectors and reversing light White reversing and license plate lights Screw mounting with two M8 screws, hole spacing 152 mm Rubber grommet ja 6,3 mm flat-pin Spare glas 531273-001 and reflector 531273-300 (Light accessories H-3) Weight: 1,20 kg

531273-001

LAMP 1173-IL, RV R/H • Turn signal, parking, brake, reversing, fog and position light

531173-011

LAMP 1173-RV, L/H • Turn signal, parking, brake, reversing, fog, position and license plate light

219

531273-300


H-5 №

POSITION LIGHTS Product name CLEARANCE LAMP FT-013 LED • • • • • • •

Changeable polarity Operating temperature: -40 °C – +55 °C Cable: 0,5 m, 2 x 0,75 mm² 12-36 VDC 12 VDC = 0,02 A / 0,5 W 24 VDC = 0,02 A / 0,5 W Weight: 0,05 kg

50013-B

FT-013 LED B, WHITE

50013-C

FT-013 LED C, RED

50013-Z

FT-013 LED Z, ORANGE

220


POSITION LIGHTS №

Product name CLEARANCE LAMP FT-015 LED • • • • • • • • •

Weatherproof Airtight housing Operating temperature: - 40 °C – +55 °C Reverse polarity protection 12-36 VDC Cable: 0,5 m, 2 x 0,75 mm² 12 V = 0,02 A/0,25 W 24 V = 0,02 A/0,5 W Weight: 0,05 kg

50015-B

FT-015 B, WHITE

50015-C

FT-015 C, RED

50015-Z

FT-015 Z, ORANGE

221

H-5


H-5 №

POSITION LIGHTS

Product name CLEARANCE LAMP FT-017 LED • • • • • •

Includes reflector Changeable polarity Operating temperature: -40 °C – +55 °C Integrated cable: 2 x 0,75 mm² Supply voltage: 12-36 V Weight: 0,05 kg

Power consumption (nominal): • 12 V = 0,04 A / 0,5 W • 24 V = 0,04 A / 1,0 W

50017-B FT-017 B, WHITE 50017-C FT-017 C, RED 50017-Z FT-017 Z, ORANGE

CLEARANCE LAMP FT-019 LED • • • • • •

Includes reflector Changeable polarity Operating temperature: -40 °C – +55 °C Supply voltage: 12-36 VDC Integrated cable: 2 x 0,75 mm² Weight: 0,05 kg

Power consumptions (nominal): • 12 VDC = 0,04 A/0,5 W • 24 VDC = 0,04 A/1,0 W

50019-B FT-019 B, WHITE 50019-C FT-019 C, RED 50019-Z FT-019 Z, ORANGE

222


POSITION LIGHTS №

Product name CLEARANCE LAMP FT-020 LED • • • • • •

Includes reflector Operating temperature: -40 °C – +55 °C Changeble polarity Supply voltage: 12-36 VDC Cable: 0,5 m, 2 x 0,75 mm² Weight: 0,07 kg

Power consumption: (nominal): • 12 VDC = 0,04 A/0,5 W • 24 VDC = 0,04 A/1,0 W

50020-B FT-020 B, WHITE 50020-C FT-020 C, RED 50020-Z FT-020 Z, ORANGE

223

H-5


H-5 №

POSITION LIGHTS

Product name CLEARANCE LAMP FT-029 LED • • • • • • • •

Water, shock and weatherproof Changeable polarity Operating temperature: 40°C - +55°C Cable: 2x0,75 mm² Supply voltage: 12-36V DC Power consumption: 12V/24 V = 0,08 A/0,08 A Rated power: 12V/24 V = 1 W/2 W Weight: 0,09 kg

50029-B FT-029 B, WHITE 50029-C FT-029 C, RED 50029-Z FT-029 Z, ORANGE

50080

CLEARANCE LAMP WITH INDICATOR FT-080 LED • • • • • • • • •

3-functional LED clearance lamp Low power consumption European E9 homologation Shock-resistant PC lampshade Three power cords: ground = white, clearance lamp function = black, indicator lamp function = yellow Operating temperature: -40 °C - 55 °C Supply voltage: 12-36 VDC Power consumption / Rated power: clearance light: 12V/24V = 1,0W/2,0W indicator: 12V/24V = 1,0W/2,0W Weight: 0,11 kg

533106-521

EXTRA BRAKE LIGHT 3106 THINLITE, RED • • • • •

Additional brake light with 10 LEDs ECE and SAE approved Tape or screw mounting Cable: 3,0 m Weight: 0,12 kg

224


POSITION LIGHTS №

H-5

Product name CLEARANCE LAMP 1174 • • • •

Maintenance-free LED-lamp with reflector Coupling with shrink tube (Duraseal or equivalent) Mounting directly to the surface or with bracket Bracket 531174-010, seal 531174-028 and plastic rivet 532700-32 are sold separately (Light accessories H-3)

Power consumption: • 12 V/0,7 W • 24 V/1,3 W

531174-120

1174 A, RED 24 V - 5,0 M • Cable length: 5,0 m • Weight: 0,25 kg

531174-230

1174 B, WHITE 24 V - 5,0 M • Cable length: 5,0 m • Weight: 0,25 kg

531174-310

1174 C , ORANSSI 12 V - 0,5 M • Cable length: 0,5 m • Weight: 0,20 kg

531174-320

1174 C , ORANGE 24 V - 0,5 M • Cable length: 0,5 m • Weight: 0,15 kg

531174-330

1174 C , ORANGE 24 V - 5,0 M • Cable length: 5,0 m • Weight: 0,30 kg

531174-350

1174 C , ORANGE 24 V - 10,0 M • Cable length: 10,0 m • Weight: 0,48 kg

225

531174-010

531174-028

532700-32


H-5 №

RUBBER ARM LIGHTS

Product name RUBBER ARM CLEARANCE LIGHT FT-009 LED • Changeable polarity • Operating time of the light source around 50 000 h • 12-36V DC • 12 V = (0,04 A)/0,5 W • 24 V = (0,02 A)/0,5 W • Operating temperature: -40 °C – +55 °C • Cabel: 2,5 m, 2x0,75 mm² • Weight: 0,40 kg

50009-A RUBBER ARM LIGHT, SHORT

50009-B RUBBER ARM LIGHT, LONG

226


RUBBER ARM LIGHTS №

Product name RUBBER ARM CLEARANCE LIGHT FT-009 LED • Changeable polarity • Operating time of the light source around 50 000 h • 12-36V DC • 12 V = (0,04 A)/0,5 W • 24 V = (0,02 A)/0,5 W • Operating temperature: -40 °C – +55 °C • Cabel: 2,5 m, 2x0,75 mm² • Weight: 0,40 kg

50009-C RUBBER ARM LIGHT, SHORT SLANTED

50009-D RUBBER ARM LIGHT, LONG L

227

H-5


H-5 №

RUBBER ARM LIGHTS

Product name RUBBER ARM CLEARANCE LIGHT FT-009 LED • Changeable polarity • Operating time of the light source around 50 000 h • 12-36V DC • 12 V = (0,04 A)/0,5 W • 24 V = (0,02 A)/0,5 W • Operating temperature: -40 °C – +55 °C • Cabel: 2,5 m, 2x0,75 mm² • Weight: 0,40 kg

50009-E RUBBER ARM LIGHT, LONG SLANTED

50009-F RUBBER ARM LIGHT, LONG L

228


RUBBER ARM LIGHTS №

Product name CLEARANCE LAMP FT-140 • • • •

50140AL

50140AP

50140FL

50140FP

Three-function LED rubber arm light Color: red, clear, yellow Cable: 2,5 m, 2 x 0,75 mm² Weight: 0,40 kg

50140-AL

CLEARANCE LAMP FT-140 L/H • Left-hand • Short

CLEARANCE LAMP FT-140 R/H • Right-hand • Short

50140-AP

CLEARANCE LAMP FT-140 L/H • Left-hand • Long

CLEARANCE LAMP FT-140 R/H • Right-hand • Long

50140-FL

50140-AL, 50140-AP 50140-FP

50140-FL, 50140-FP

229

H-5


H-5 №

RUBBER ARM LIGHTS

Product name POSITION LIGHT • Color: white, red • Non-corrosive lamp base 5W BA15 • E-approved Available as spare parts (Light accessories H-3): • spare glasses 50585, 50586, 50588 • LED units 50595, 50596, 50597 • lamp socket 50589

50580

50585 50586 50588

50589

50595 50596 50597

POSITION LIGHT L 195 MM • Arm length: 195 mm • Weight: 0,28 kg

50582

POSITION LIGHT L 110 MM • Arm length: 110 mm • Weight: 0,17 kg

50580

POSITION LIGHT LED • Color: clear, red • E-approved

50593

POSITION LIGHT L 195 • • • • •

Arm length: 195 mm 12 diods 12-24 V Cable length: 5,0 m Weight: 0,50 kg

50593

Available as spare parts (Light accessories H-3): • spare glasses 50585, 50586, 50588 • LED units 50595, 50596, 50597

50599

POSITION LIGHT L 182 • • • • •

50598

50599

Proplast code: 40167004 Arm length: 182 mm IP 68, 24 V 0,85 W Cable length: 1,75 m Weight: 0,50 kg

POSITION LIGHT L 116 • • • • •

Proplast code: 40168004 Arm length: 116 mm IP 68, 24 V 0,85 W Cable length: 1,75 m Weight: 0,50 kg

50598

230

50582


WORK LIGHTS № 50036

Product name WORK LIGHT FT-036 LED • • • • • • •

Compact and easy to install even to confined places Made out of high quality impact and heat resistant materials Fixed polarisation: ground = white wire, (+) = black wire Waterproof - IP68 (DIN EN 60529) Electromagnetic compatibility (EMC certificate) Uses of OSRAM 9-diode technology Weight: 0,6 kg

• • • • • •

Working temperature: -40 °C - + 35 °C Supply voltage: 12-55 VDC Rated power: 13,5 W Luminous flux: 1300 lm Color temperature: 6000 K Cable length: 1,5 m

Power consumption: • 12 V = 1,1 A • 24V = 0,55 A • 48 V = 0,28 A

231

H-5


H-5 №

WORK LIGHTS

Product name WORK LIGHT FT-036 LED • • • • • •

Aluminum frame Shock resistant and waterproof - IP68 (DIN EN 60529) Fixed polarization: country = white wire (+) = black wire Electromagnetic compatibility (EMC certificate) Uses of OSRAM 9-diode technology Weight: 0,8 kg

• • • • • •

Rated power: 34 W Working temperature: -40 °C – + 55 °C Supply voltage: 12-55 VDC Luminous flux: 2800 lm Color temperature: 6000 K Cable length: 1,5 m

50036-ALU

Power consumption: • 12 V = 2,8 A • 24V = 1,4 A • 48 V = 0,7 A

50036- WORK LIGHT FT-036 LED ALU 2800 ALU • Available with blue or black frame • Cable length: 1,5 m

50036- WORK LIGHT FT-036 DS LED DS

50036-DS

• Built-in Deutsch Stecker socket

232


WORK LIGHTS №

H-5

Product name WARNING LAMP FT-100 LED • • • • •

Approved as special warning lamp according to ECE regulation 65 (TA1) Waterproof (IP68) Shockproof 20 LEDs Supply voltage: 12-55 V

Peak/average power consumption: • 12 V = 2 A / 0,8 A • 24 V = 1A / 0,4 A • 48 V = 0,5 A / 0,2 A

50100-3S

• Peak/average power: 12-55V 25 W / 10 W • Flashing frequency: f = 2.0 Hz (+/- 0,1Hz) • Operating temperature: -40 °C – +55 °C

50100- WARNING LAMP FT-100 3S 3S • Cabel length: 1,5 m • Screw mounting • Weight: 0,7 kg

50100- WARNING LAMP FT-100 MAG M30 MAG • Cable length: straight 3,0 m / spiral 0,6 m M30 • Magnet fastening • Weight: 1,4 kg

50100-3S, 50100-MAG M30

50100-MAG M30

233


H-6

P-LIGHT SYSTEMS

Product name

521008

P-LIGHT CHARGER 2-CIRCUIT 24 V • Weight: 0,5 kg

521165

P-LIGHT MIDI • • • • • • • • •

For parking and position lights Material: 3 mm electropolished stainless steel Width: 210 mm (260 mm with fasteners) Height: 190 mm (210 mm with fasteners) Depth: 240 mm Mounting to body or in toolbox Battery: 24 VDC / 17 Ah (maintenance-free) Charge: <5 A (≈ 120 W) while driving (switching min 2x1,5 mm² wires) Weight: 20,0 kg

Output: • 2 x 25 W (parking lights) • 1 x 50 W (AUX, e.g. radio-control) Operating time (fully charged batteries at +20 °C): • 10 W ≈ 40 h • 20 W ≈ 20 h • 50 W ≈ 8 h

521405

P-LIGHT MAXI • • • • • • • •

Material: 3 mm electropolished stainless steel Width: 430 mm (490 mm with fasteners) Height: 230 mm (260 mm with fasteners) Depth: 250 mm Mounting to body or in toolbox Battery: 24 VDC / 40 Ah (maintenance-free) Charge: < 10 A (≈ 240 W) while driving (switching min 2x2,5 mm² wires) Weight: 45,0 kg

Output: • 2 x 100 W (parking lights) • 1 x 200 W (e.g. cargo area lighting) Operating time (fully charged batteries at +20 °C): • 20 W ≈ 48 h • 50 W ≈ 19 h • 100 W ≈ 9 h • 200 W ≈ 4 h

234


P-LIGHT SYSTEMS №

Product name

521715

P-LIGHT MAGNUM 150AH • • • • • • • • • •

For large power levels, carriage bridges, steering axles etc. Material: powder-coated steel/stainless steel Width: 880 mm Height: 450 mm Depth: 550 mm Installation in toolbox or equivalent Battery: 24 V / 150 Ah Charge: <1 x 6 mm² conductors Power: 1 x 200 A Weight: 100,0 kg

Output: • 2 x 100 W (parking lights) • 1 x 200 W (e.g. cargo area lighting) • 1 x 200 W (AUX, e.g. radio-control)

521720

P-LIGHT SOLENOID • Weight: 1,0 kg

P-LIGHT HYDRO 521812

P-LIGHT HYDRO 2,2KW-9L-120AH • • • • • • • •

521920

All-in-one Integrated 2,2 kW electric motor Integrated hydraulic pump 200 bar + 9 l tank Includes 2-way hydraulic valve Battery: 24 V / 120 Ah Output: 2x100 W, 1x200 W, 1x200 W Dimensions: 880 x 525 x 550 mm Weight: 125,00 kg

521812, 521920

P-LIGHT HYDRO 3,0KW-25L-200AH • • • • •

All-in-one Integrated 3,0 kW electric motor Tank 25 l Battery: 24 V / 200 Ah Weight: 145,00 kg

235

H-6


H-6 №

P-LIGHT SYSTEMS

Product name REMOTE CONTROL • Includes a transmitter, receiver and antenna • Weight: 0,79 kg

521903

REMOTE CONTROL, 3 CHANNELS

521908

REMOTE CONTROL, 8 CHANNELS 521903

521953

ANTENNA WITH 3 M CABLE • Weight: 0,24 kg

521955

DIPOLE ANTENNA • Weight: 0,04 kg

522170

P-LIGHT BATTERY 17AH • Weight: 5,56 kg

236

521908


P-LIGHT SYSTEMS №

Product name

522900

P-LIGHT PUSH BUTTON • Weight: 0,02 kg

522905

P-LIGHT SWITCH • Weight: 0,02 kg

523008

P-LIGHT ELBOX POWER, 63AH-> • Weight: 0,50 kg

523166

P-LIGHT ELBOX MIDI, 17AH • Weight: 0,57 kg

237

H-6


H-7

REFLECTORS

Product name

50030

TRIANGLE REFLECTOR DOB-030A • Color: red • Screw fastening • Weight: 0,12 kg

50031

TRIANGLE REFLECTOR DOB-031 • Color: red • Screw fastening • Weight: 0,12 kg

538301-100

REFLECTOR 8301 A • • • •

For vehicle combination Color: red Screw fastening Weight: 0,06 kg

238


REFLECTORS №

Product name ROUND REFLECTOR 6301/1 • Diameter: 84,0 mm • Screw fastening • Weight: 0,03 kg

536301-110

6301/1A, RED

536301-210

6301/1B, WHITE

REFLECTOR 6801 • Screw fastening • Weight: 0,04 kg

536801-100

6801 A, RED

536801-200

6801 B, WHITE

536801-300

6801 C, ORANGE

239

H-7


H-7 №

REFLECTORS Product name ROUND REFLECTOR 7301 • Diameter: 68,2 mm • Weight: 0,04 kg

537301-100

7301 A, RED

537301-200

7301 B, WHITE

537301-300

7301 C, ORANGE

ROUND REFLECTOR 7702, SCREW FASTENING • Diameter: 55,0 mm • Screw fastening, M5x12 • Weight: 0,01 kg

537702-100

7702 A, RED

537702-200

7702 B, WHITE

537702-300

7702 C, ORANGE

537702-310

ROUND REFLECTOR 7702 C, ADHESIVE TAPE - ORANGE • Diameter: 55,0 mm • Adhesive base without screw • Weight: 0,01 kg

240


REFLECTORS №

Product name

537901-220

REFLECTOR 7901 B, SCREW FASTENING - WHITE • Weight: 0,04 kg

REFLECTOR 7901, ADHESIVE TAPE • Weight: 0,04 kg

537901-100

7901 A, RED

537901-200

7901 B, WHITE

537901-300

7901 C, ORANGE

241

H-7


â&#x201E;&#x2013;

Product name

242


I LOCKING DEVICES ADJUSTABLE FASTENERS I-1 DROPSIDE FITTINGS I-2 FLAT BED ACCESSORIES I-3 LOCKING DEVICES I-4 LOCKING PILLARS I-5


I-1 №

ADJUSTABLE FASTENERS Product name ADJUSTABLE FASTENER 91 • The lock can be secured with padlock • Weight: 0,04 kg

22091

ADJUSTABLE FASTENER 91 • Material: electrogalvanized steel Suitable counterpieces: • 22201 • 22202

22092

22201

22202

ADJUSTABLE FASTENER 91 SS • Material: stainless steel • Suitable SS-counterpiece 22203

22203

22091

22092

Please note! Counterpieces can be found from the end of this section I-I.

244


I-1

ADJUSTABLE FASTENERS №

Product name ADJUSTABLE FASTENER 105 • The lock can be secured with padlock • Weight: 0,15 kg

22105

ADJUSTABLE FASTENER 105 • Material: electrogalvanized steel Suitable counterpieces: • 22208 • 22217 • 22239

22106

22208

22217

22203

22207

ADJUSTABLE FASTENER 105 SS • Material: stainless steel Suitable SS-counterpieces: • 22203 • 22207

22105

22106

245

22239


I-1 №

ADJUSTABLE FASTENERS Product name ADJUSTABLE FASTENER 107 • The lock can be secured with padlock • Weight: 0,24 kg

22107

ADJUSTABLE FASTENER 107 • Fastening holes: Ø 7 mm • Material: electrogalvanized steel Suitable counterpieces: • 22205 • 22206 • 22217 • 22239

22108

22205

22206

22217

ADJUSTABLE FASTENER 107 SS • Fastening holes: Ø 6,5 mm • Material: stainless steel • Suitable SS-counterpiece 22207

22207

22107

22108

Please note! Counterpieces can be found from the end of this section I-I.

246

22239


ADJUSTABLE FASTENERS №

Product name

22109

P&L SLAM BOLT 109 • Material: electrogalvanized steel • Pastore&Lombardi code: 020500868A • Weight: 0,20 kg

247

I-1


I-1 №

ADJUSTABLE FASTENERS Product name COUNTERPIECES FOR ADJUSTABLE FASTENERS • Material: galvanized steel • Weight ≤ 0,08 kg

22201

COUNTERPIECE 19 • Fastening holes: Ø 5,0 mm • Counterpiece for 22091

22202

COUNTERPIECE 10 • Fastening holes: Ø 4,5 mm • Counterpiece for 22091

22205

COUNTERPIECE 25 • Counterpiece for 22107

22206

COUNTERPIECE 14 • Fastening holes: Ø 5,5 mm • Counterpiece for 22107

248


ADJUSTABLE FASTENERS №

Product name COUNTERPIECES FOR ADJUSTABLE FASTENERS • Material: electrogalvanized steel • Weight ≤ 0,08 kg

22208

COUNTERPIECE 11 • Fastening holes: Ø 6,0 mm • Counterpiece for 22105

22217

COUNTERPIECE 17 • Fastening holes: Ø 6,0 mm Counterpiece for: • 22105 • 22107

22239

COUNTERPIECE 39 • Fastening holes: Ø 5,5 mm Counterpiece for: • 22105 • 22107

249

I-1


I-1 №

ADJUSTABLE FASTENERS Product name SS-COUNTERPIECES FOR ADJUSTABLE FASTENERS • Material: stainless steel

22203

COUNTERPIECE 10 RST • Fastening holes: Ø 4,5 mm • Weight: 0,01 kg Counterpiece for: • 22092 • 22106

22207

COUNTERPIECE 14 RST • Fastening holes: Ø 5,5 mm • Weight: 0,04 kg Counterpiece for: • 22106 • 22108

250


DROPSIDE FITTINGS №

Product name OVERCENTRE LOCK 120 • • • •

21120

Surcface-mounting with screws Suitable lock for boxes The lock can be secured with padlock Weight: 0,54 kg

OVERCENTRE LOCK 120 • Untreated

21121

OVERCENTRE LOCK 120 S • Hot-dip galvanized • Suitable counterpiece 21122

21122

COUNTERPIECE 202 • • • •

21324

Surcface-mounting with screws Galvanized Weight: 0,18 kg Counterpiece for 21121

OVERCENTRE LOCK 23S • • • •

Recessed overcentre lock for 25 mm dropside Galvanized Includes counterpiece Weight: 1,02 kg

251

I-2


I-2

DROPSIDE FITTINGS

Product name

21141

OVERCENTRE LOCK 14 S • • • • •

21483

Molded locking piston Surface-mounting with screws Galvanized Counter piece included Weight: 1,02 kg

OVERCENTRE LOCK SECUR 685-1 • Galvanized • Weight: 1,05 kg

COUNTERPIECE • Weld mounting • Untreated • Weight: 0,05 kg

21144

COUNTERPIECE S-17

21146

COUNTERPIECE S-23

21144

252

21146


DROPSIDE FITTINGS №

Product name COMBI LOCK • Screw mounting • Electrogalvanized • Weight: 1,85 kg

21700

COMBI LOCK 132 V, L/H

21701

COMBI LOCK 172 H, R/H

21702

COUNTERPIECE K 16 • Weld mounting • Weight: 0,12 kg

21700, 21701

21700

21701

21702

OVERCENTRE LOCK RAPID • Weld mounting • Untreated • Weight: 1,70 kg

21800

OVERCENTRE LOCK RAPID, R/H

21802

OVERCENTRE LOCK RAPID, L/H

21804

COUNTERPIECE FOR OVERCENTRE LOCK RAPID

21800, 21802

• Weight: 0,22 kg

21804

253

I-2


I-3

FLAT BED ACCESSORIES

Product name

16250

PLATFORM FASTENER K-80 • • • •

Break/nominal capacity of 80 kN/40kN Unprimed Weld mounting Weight: 11,3 kg

Includes: • 1 pc. bottom (16250-3) • 1 pc. counter plate (16251) • 1 pc. welded on high cone, 110 mm (16253) • 1 pc. accessory kit (16254)

16250-3 BOTTOM FOR PLATFROM FASTENER K-80 • Weight: 5,6 kg

16251

COUNTER PLATE K-80 • Weight: 2,7 kg

254


FLAT BED ACCESSORIES №

Product name

16252

CONE K-80, LOW • Height: 80 mm • Weight: 2,1 kg

16253

CONE K-80, HIGH • Height: 110 mm • Weight: 2,7 kg

16254

ACCESSORY KIT K-80 • Weight: 0,9 kg Includes: • 1 pc. wedge chain • 1 pc. pin chain • 1 pc. wedge

255

I-3


I-4

BACK DOOR LOCKS

Product name

25002

DOOR LOCK TMT-S-27 • Galvanized • The pipe is not included in the delivery • Weight: 5,50 kg • Compatible pipe 25003

2501002

2501101

2501201

25003

KEEPER FOR LOCKING GEAR SS, WELD-ON • Material: stainless steel • Weight: 0,60 kg

CAM FOR LOCKING GEAR SS • Material: stainless steel • Weight: 0,62 kg

CAM FOR LOCKING GEAR L, SS • Material: stainless steel • Weight: 0,8 kg

256


BACK DOOR LOCKS №

Product name

2501102

KEEPER FOR LOCKING GEAR SS, BOLT-ON

2501103

2501104

2501105

2501107

2501108

• Material: stainless steel • Weight: 0,67 kg

GUIDE PLATE FOR PIPE • Material: stainless steel • Weight: 0,40 kg

BACKPLATE FOR GUIDE PLATE • Weight: 0,01 kg

PIPE HOLDER • Material: stainless steel • Weight: 0,20 kg

LEVER RETAINER • Material: stainless steel • Weight: 0,40 kg

LEVER • Weight: 0,80 kg

257

I-4


I-4

BACK DOOR LOCKS

Product name

2501109

GUIDE PLATE WITH RUBBER

2501117

2501118

25003

• Material: stainless steel • Weight: 0,4 kg

MOUNTING PIECE FOR LEVER • Material: stainless steel • Weight: 0,2 kg

FASTENING RIVET • Spare part for 25011-17 • Weight: 0,20 kg

PIPE S-27 X 2,8 • Galvanized • Length: 6,0 m • Weight: 11,40 kg

25013

PIPE R-27 X 2,5 • Material: polished stainless steel • Length: 6,75 m • Weight: 9,5 kg

25016

25003

25013

PIPE R-16 X 2,0 • Material: polished stainless steel • Length: 6,0 m • Weight: 4,3 kg

25016

258


BACK DOOR LOCKS №

Product name

25019

PIPE S-34 X 2,25 • Galvanized • Length: 6,0 m • Weight: 14,5 kg

25025

DOOR LOCK TMT-S-34 • Galvanized • Weight: 4,4 kg • The pipe is not included in the delivery • Compatible pipe 25019

25019

259

I-4


I-4

BACK DOOR LOCKS

Product name

25026

DOOR LOCK TMT-S-16-BR • Material: hot-dip galvanized steel • The pipe is not included in the delivery • Weight: 2,7 kg • Compatible pipe 25016

25500

25016

DOOR LOCK ZN • Suitable for Ø 18 mm pipe • Galvanized • Weight: 2,9 kg

260


BACK DOOR LOCKS №

Product name

25392

P&L DOOR LOCK HANDLE 16 MM • Material: stainless steel • Pastore&Lombardi code: 071925949B • Weight: 1,0 kg • Compatible pipe 25016

25016

25394

P&L EXTERNAL LOCKING KIT 16 MM • • • • •

Material: stainless steel Washer is welded to the pipe by user, measurement x is undefined The pipe is not included in the delivery Pastore&Lombardi code: 071222163A Weight: 1,1 kg

• Compatible pipe 25016

25016

261

I-4


I-4 №

BACK DOOR LOCKS Product name LOCKING GEAR TMT-R • • • •

Manufactured out of stainless steel AISI 304 Lower pipe holder is provided with rubber Complete door lock consist of locking gear, handle and pipe The pipe is not included in the delivery

• Compatible pipe 25013 • Compatible handles 25428, 25430 and 25432

25420

LOCKING GEAR TMT-R-27

25013

• Set with screwable keepers • Weight: 4,10 kg Set includes following components: • 2 pcs. short cam for locking gear (25011-01) • 2 pcs. bolt-on keeper for locking gear (25011-02) • 1 pc. guide plate for pipe (25011-03) • 1 pc. guide plate with rubber (25011-09) • 2 pcs. backplate for guide plate (25011-04) • 2 pcs. pipe holder (25011-05)

25422

LOCKING GEAR TMT-R-27-W • Set with weldable keepers • Weight: 5,60 kg Set includes following components: • 2 pcs. short cam for locking gear (25011-01) • 2 pcs. weld-on keeper for locking gear (25010-02) • 1 pc. guide plate for pipe (25011-03) • 1 pc. guide plate with rubber (25011-09) • 2 pc. backplate for guide plate (25011-04) • 2 pcs. pipe holder (25011-05)

262

25428 25430 25432


BACK DOOR LOCKS №

Product name LOCKING GEAR TMT-R • • • •

Manufactured out of stainless steel AISI 304 Lower pipe holder is provided with rubber Complete door lock consist of locking gear, handle and pipe The pipe is not included in the delivery

• Compatible pipe 25013 • Compatible handles 25428, 25430 and 25432

25424

25013

LOCKING GEAR TMT-R-27-L • Set with screwable keepers and long cam • Weight: 5,60 kg Set includes following componenets: • 1 pc. short cam for locking gear (25011-01) • 1 pc. long cam for locking gear “L” (25012-01) • 2 pcs. screw-on keeper for locking gear (25011-02) • 1 pc. guide plate for pipe (25011-03) • 1 pc. guide plate with rubber (25011-09) • 2 pc. backplate for guide plate (25011-04) • 2 pcs. pipe holder (25011-05)

25426

LOCKING GEAR TMT-R-27L-W • Set with weldable keepers • Weight: 5,60 kg Set includes following componenets: • 1 pc. short cam for locking gear (25011-01) • 1 pc. long cam for locking gear “L” (25012-01) • 2 pcs. weld-on keeper for locking gear (25010-02) • 1 pc. guide plate for pipe (25011-03) • 1 pc. guide plate with rubber (25011-09) • 2 pc. backplate for guide plate (25011-04) • 2 pcs. pipe holder (25011-05)

263

25428 25430 25432

I-4


I-4

BACK DOOR LOCKS

Product name

25428

PUSH HANDLE DMG-R-27 • • • • • • • •

Handle is equipped with two return springs Cylinderlock is included in the delivery Option for padlock Push handle increases user comfort by enhancing the door openability Suitable for TMT R locking gears with pipe Ø 27 mm Material: stainless steel Screw and weld mounting Weight: 1,4 kg

25013

25420 25422 25424 25426

• Compatible pipe 25013 Suitable for locking gears: • 25420 • 25422 • 25424 • 25426

25430

LOCKING HANDLE SET TMT-R-27 PRO • • • • • •

The handle grip is ergonomically shaped and plastic coated Mounting pad is designed to improve installability Suitable for TMT R locking gears with pipe Ø 27 mm Material: stainless steel AISI 304 Screw and weld mounting Weight: 1,5 kg

Set includes following componenets: • 1 pc. lever Pro (25011-08) • 1 pc. lever retainer (25011-07) • 1 pc. mounting piece for lever (25011-17) • 1 pc. fastening staple (25011-18) • Compatible pipe 25013 Suitable for locking gears: • 25420 • 25422 • 25424 • 25426

264

25013

25420 25422 25424 25426


BACK DOOR LOCKS №

Product name

25432

PUSH HANDLE BP-R-27 • • • • • • • •

Handle is equipped with two return springs Cylinderlock is included in the delivery Option for padlock Push handle increases user comfort by enhancing the door openability Suitable for TMT R locking gears with pipe Ø 27 mm Material: stainless steel Screw and weld mounting Weight: 1,4 kg

• Compatible pipe 25013 Suitable for locking gears: • 25420 • 25422 • 25424 • 25426

25434

P&L PUSH HANDLE 27 SS • Material: stainless steel • Pastore&Lombardi code: 071925189F • Weight: 2,3 kg • Compatible pipe 25013

25013

265

25013

25420 25422 25424 25426

I-4


I-4

BACK DOOR LOCKS

Product name

25436

P&L LEVER SS • • • •

Compatible retainers 25436-1 and 25436-2 Material: stainless steel Pastore&Lombardi code: 071915128 Weight: 0,7 kg

25436-1 P&L LEVER RETAINER SS - BOLT-ON • • • • •

Retainer for lever 25436 Material: stainless steel Bolt fastening Pastore&Lombardi code: 071920299A Weight: 0,3 kg

25436-2 P&L LEVER CLAMP SS - WELD-ON • • • • •

Clamp for lever 25436 Material: stainless steel Welding attachment Pastore&Lombardi code: 071921602 Weight: 0,2 kg

266


DOOR RETAINERS №

Product name

25298

DOOR RETAINER 12/40 • Material: galvanized steel • Screwable • Weight: 0,32 kg

25299

DOOR RETAINER 16/60 • Material: galvanized steel • Screwable • Weight: 0,82 kg

2529845

DOOR RETAINER 12/45 • Material: galvanized steel • Screwable • Weight: 0,4 kg

267

I-4


I-4

DOOR RETAINERS

Product name

25301

DOOR RETAINER 1380 SS • Material: stainless steel • Weight: 0,06 kg

25309

COUNTER PLATE FOR RETAINER 1380B • Material: stainless steel • Surface-mounting • Weight: 0,04 kg

25312

COUNTER PLATE FOR RETAINER 1380A • Material: stainless steel • Embedded mounting • Weight: 0,06 kg

268


DOOR RETAINERS №

Product name

25320

DOOR RETAINER 800, COMPLETE • Material: plastic • Both parts are included in the delivery • Weight: 0,06 kg

25340

DOOR RETAINER 865 • Material: rubber, plastic inner part • Weight: 0,06 kg

25350

SPRING LOADED SLAM BOLT • Material: galvanized steel • Weight: 0,14 kg

25333

DOOR RETAINER SWAP BODY • Weight: 3,50 kg

269

I-4


I-4 №

DOOR RETAINERS Product name TMT DOOR RETAINER

№ 25330 25336

25334

Door retainer mini, galvanized Door retainer midi, SS

A (mm)

B (mm)

C (mm)

D (mm)

E (mm)

321,5 - 491,5 519,5 - 879,5

256,6 369.5

60 110

12 16

53 57

TMT DOOR RETAINER MIDI • Material: galvanized steel • Weight: 3,4 kg

270

Weight (kg) 1,1 3,5


DOOR RETAINERS №

Product name

25335

TMT DOOR RETAINER MAXI • Material: galvanized steel • Weight: 3,7 kg

25331

P&L DOOR RETAINER SS • Material: stainless steel • Pastore&Lombardi code: 072325816 • Weight: 1,80 kg

25339

DOOR RETAINER, WIRE • Weight: 1,40 kg

271

I-4


I-4 №

DOOR RETAINERS Product name P&L DOOR RETAINER PU-L103/123/143 SS • • •

25345

Material: stainless steel and polyurethane Surface-mounting Door retainer and counter plate are included in the delivery

DOOR RETAINER PU-L103 SS • Weight: 0,12 kg

25345-1 SPARE LATCH FOR 25345 • Weight: 0,03 kg • Spare part for 25345

25347

DOOR RETAINER PU-L123 SS • Weight: 0,12 kg

25347-1 SPARE LATCH FOR 25347 • Weight: 0,03 kg • Spare part for 25347

25349

DOOR RETAINER PU-L143 SS • Weight: 0,13 kg

25349-1 SPARE LATCH FOR 25349 • Weight: 0,03 kg • Spare part for 25349

272


DOOR RETAINERS №

Product name

25344

P&L PLATE FOR PU DOOR LATCH • Weight: 0,03 kg • Spare part for 25345, 25347 and 25349

25348

COUNTER PLATE FOR PU DOOR LATCH • Weight: 0,03 kg • Spare part for 25345, 25347 and 25349

25346

WASHER FOR PU DOOR LATCH • Weight: 0,03 kg

273

I-4


I-4 №

OTHER LOCKS Product name COMPOSITE DOOR LOCK • • • • • •

25274

Glass-fiber reinforced polyamide body and roll Metal handle - rotation 90°, to left 4 mm compression function to the closure Cylinder lock The lock can be secured with padlock Weight: 0,3 kg

COMPOSITE DOOR LOCK

25274

• Screw mounting • Includes sealing

25276

COMPOSITE DOOR LOCK WITH INTEGRATED SCREWS • Includes sealing

25270-1 DOOR LOCK SEALING • Suitable for door lock 25274 • Weight: 0,03 kg

274

25276


OTHER LOCKS №

Product name

25278

DOOR LOCK - BLACK, T-HANDLE • • • • • • •

Glass-fiber reinforced polyamide body and roll Metal handle - rotation 90°, to left 4 mm compression function to the closure Cylinder lock The lock can be secured with padlock Integrated screws Weight: 0,3 kg

275

I-4


I-4

OTHER LOCKS

Product name

25286

DOOR LOCK SS, 2-PIECES • • • •

25287

Material: stainless steel Sealing included Keylock Weight: 0,5 kg

ROTARY LATCH LOCK SS • • • •

Material: stainless steel Sealing included Keylock Weight: 0,50 kg

276


OTHER LOCKS №

Product name

25288

DOOR LOCK SS • • • •

Material: stainless steel Sealing included Keylock Weight: 0,5 kg

LOCKING DEVICE FOR SUPPORT LEG • • • • • • •

Materials: body cast iron, other parts out of steel, galvanized bolt Includes grease nipple Ready for installation Finishing: primed Welding attachment Grease before use Weight: 1,2 kg

25300

LOCKING DEVICE 20 MM

25302

LOCKING DEVICE 25 MM

25300

277

25302

I-4


I-4 №

OTHER LOCKS Product name

DOOR LOCK 408

• Sealing included • Weight: 0,5 kg

DOOR LOCK 408 ZP • Electrogalvanized

25290

DOOR LOCK 408 ZP

25292

DOOR LOCK 408 ZP, INTERLOCK • Includes cylinder lock

DOOR LOCK 408 SS • Material: stainless steel

25291

DOOR LOCK 408 SS

25293

DOOR LOCK 408 SS, INTERLOCK • Includes cylinder lock

278


OTHER LOCKS №

Product name

25295

DOOR LOCK 1501 SS • • • •

Surface material: stainless steel Mechanism material: galvanized steel Includes shielded cylinder lock and seal Weight: 0,7 kg

25295-1 SEALING FOR DOOR LOCK 1501 SS • Weight: 0,05 kg

25295-2 LOCK CORE FOR DOOR LOCK 1501 SS • Weight: 0,7 kg

279

I-4


I-4

OTHER LOCKS

Product name

25296

DOOR LOCK 1561C SS WITH RODS • • • • • • • •

25297

3-point locking possible Locking rods are included in delivery Includes shielded cylinder lock and seal Lock handing changeable Surface material: stainless steel Mechanism material: galavnized steel Guides and rods out of galvanized steel. Weight: 0,7 kg

DOOR LOCK 1561 SS • • • • •

Includes shielded cylinder lock and seal Lock handing changeable Delivery does not include locking rods Material: stainless steel (also the mechanism) Weight: 0,5 kg

25296-1 GUIDE PLATE • Electrogalvanized • Weight: 0,02 kg

25296-2 LOCKING ROD • Electrogalvanized • Weight: 0,1 kg

280


SIDE DOOR LOCKS №

Product name KEEPER DMG-R-16 • • • •

Material: AISI 304L Bolt mounting Weight: 0,23 kg Compatible locking cam 25122

25118

KEEPER DMG-R-16-R/H

25120

KEEPER DMG-R-16-L/H 25118

25118

25120

25122

25120

LOCKING CAM DMG-R-16 • Material: AISI 304L • Welding attachment • Weight: 0,07 kg Suitable for: • 25118 • 25120

281

I-4


I-4

SIDE DOOR LOCKS

Product name

25195

DOOR LOCK TMT-R-16 MINI • • • • • • • •

25205

Material: stainless steel Molded handle Lockable with key Measurements for embedding: 220 x 97 x 27 mm Embedding depth: 27 mm For 16 mm rod 25206 or pipe 25016 Compatible locking cam 25201 Weight: 0,86 kg

25210

P&L RECESSED LOCK R-29/16 • • • • • •

Material: AISI 316 Plastic-coated handle Key lock option available Embedding depth: 29 mm Pastore&Lombardi code: 071425952C Weight: 1,55 kg

282


SIDE DOOR LOCKS №

Product name

25208

P&L RECESSED LOCK R-27,5/16 • • • • • •

25209

Material: AISI 316 Plastic-coated handle Key lock option available Embedding depth: 27,5 mm Pastore&Lombardi code: 071425951C Weight: 1,20 kg

P&L SEAL FOR RECESSED LOCK • Suitable for recessed Pastore&Lombardi locks 25205 and 25208 • Pastore&Lombardi code: 071923503 • Weight: 0,26 kg

283

I-4


I-4

SIDE DOOR LOCKS

Product name

25210

LOCKING CAM TMT SS • Material: stainless steel • Welding attachment • Weight: 0,04 kg Suitable for: • 25195 • 25198 • 25200 • 25201

2520104

SECURING LATCH FOR TMT DOORLOCK, WIDE • Weight: 0,10 kg Suitable for TMT door locks: • 25198 • 25200 • 25201

2520105

SECURING LATCH SPRING, WIDE • Weight: 0,05 kg Suitable for TMT door locks: • 25198 • 25200 • 25201

2520106

2520107

SECURING LATCH FOR TMT-DOORLOCK, NARROW • Suitable for the old model of TMT door locks • Weight: 0,1 kg

SPRING FOR HANDLE, NARROW • Suitable for the old model of TMT door locks • Weight: 0,01 kg

284


SIDE DOOR LOCKS №

Product name

2520111

SPRING FOR HANDLE

25202

• Suitable for the old model of TMT door locks • Weight: 0,03 kg

CYLINDER LOCK FOR TMT DOOR LOCK • Weight: 0,06 kg Suitable for TMT door locks: • 25198 • 25200 • 25201

25204

DOOR LOCK SEAL FRAME 2 MM • Material: EVA • Weight: 0,05 kg Suitable for TMT door locks: • 25198 • 25200 • 25201

252062,5

ROD SS 16 MM, 2,5 M • • • •

Material: stainless steel Length: 2,5 m Thickness: 16 mm Weight: 1,6 kg/m

285

I-4


I-5 №

ARMATON LOCKING PILLARS Product name

ARMATON 4000 XF

• •

Aluminium locking pillar for light truck dropsides (up to 3,5 t) Armaton pillars are suitable to most platform bed types

Compatible fastener: • 24544 for side pillars • 24540 for rear pillars

24544 24540

ARMATON 4000 XF 300 • Side height: 300 mm

24300

4000 XF 300, FRONT L/H • Weight: 0,7 kg

24302

4000 XF 300, FRONT R/H

FRONT

• Weight: 0,7 kg

24304

4000 XF 300, SIDE • Weight: 1,4 kg

24306

4000 XF 300, REAR • Weight: 1,5 kg

ARMATON 4000 XF 400 • Side height: 400 mm

24400

SIDE

4000 XF 400, FRONT L/H • Weight: 0,9 kg

24402

4000 XF 400, FRONT R/H • Weight: 0,9 kg

24404

4000 XF, 400 SIDE • Weight: 1,7 kg

24406

4000 XF 400, REAR • Weight: 1,7 kg

REAR

286


ARMATON LOCKING PILLARS № 24518

Product name ARMATON 5000 XF REAR PILLAR R/H / L/H 600 MM • Compatible fastener 24540 • Weight: 2,2 kg

24540

24519

SPARE HANDLE FOR ARMATON XF • Suitable for Armaton locking pillars • Spare handle with installation kit • Weight: 0,1 kg

24300-24518

24540

PILLAR FASTENER, REAR • • • •

Suitable for Armaton rear pillars Material: aluminium Bolt mounting Weight: 0,3 kg

287

I-5


I-5

ARMATON LOCKING PILLARS

Product name

24544

SIDE PILLAR FASTENER • • • •

Suitable for Armaton side pillars Material: aluminium Bolt mounting Weight: 0,1 kg

END PROFILE FOR SIDEBOARD 4000 XF

• Suitable for aluminium Armaton locking pillars • Material: aluminium • End profiles include end caps and wearing piece

END PROFILE 300

24300-24518

• Sideboard height: 300 mm • Weight: 0,3 kg

24550

END PROFILE 300-L/H

24552

END PROFILE 300-R/H

END PROFILE 400 • Sideboard height: 400 mm • Weight: 0,4 kg

24554

END PROFILE 400-L/H

24556

END PROFILE 400-R/H

288


DG LOCKING PILLARS №

Product name

230510

DG SIDEBOARD POCKET, SCREW-ON • Material: galvanized steel • Screws and counster plate included • Weight: 0,16 kg Suitable for profiles: • 33275 • 33276

23120001

DG ADAPTER FOR FASTENER • For diagonal lower profile • Material: untreated steel • Weight: 1,12 kg

23120002

DG PILLAR FASTENER, WELD-ON • Material: untreated steel • Weight: 1,27 kg

289

I-5


I-5

DG LOCKING PILLARS

Product name

23120003

DG PILLAR FASTENER, BOLT-ON • Galvanized • Weight: 1,27 kg

23120008

DG EXTENDER, RIVET • Galvanized • Weight: 1,15 kg

23120009

DG EXTENDER PIECE • Material: untreated steel • Weight: 1,00 kg

290


DG LOCKING PILLARS №

Product name

DG LOCKING PILLARS

• • • •

DG locking pillars for vehicles over 3,5 t DG steel pillars are extremely durable and easy-to-use Manufactured out of high-grade steel and treated with cataforetic paint Material choise results reduced weight

DG 400 and 600: • the rear pillar includes housing for rear dropside catch • supplied with bolt-on pillar supports DG 800 and 1000: • supplied with weld-on pillar supports • Material: painted steel • Color: black

23124000 DG 400 23124000

DG 400, SIDE • Weight: 6,8 kg

23124001

DG 400, REAR-R/H • Weight: 6,6 kg

23124002

DG 400, REAR-L/H • Weight: 6,6 kg

23124003

DG 400, FRONT-R/H • Weight: 3,5 kg

23124004

23124001

23124002

23124003

23124004

DG 400, FRONT-L/H • Weight: 3,5 kg

291

I-5


I-5 №

DG LOCKING PILLARS Product name

DG LOCKING PILLARS

• • • •

DG locking pillars for vehicles over 3,5 t DG steel pillars are extremely durable and easy-to-use Manufactured out of high-grade steel and treated with cataforetic paint Material choise results reduced weight

DG 400 and 600: • the rear pillar includes housing for rear dropside catch • supplied with bolt-on pillar supports DG 800 and 1000: • supplied with weld-on pillar supports • Material: painted steel • Color: black

23126000 DG 600 23126000

DG 600, SIDE • Weight: 8,4 kg

23126001

DG 600, REAR-R/H • Weight: 8,1 kg

23126002

DG 600, REAR-L/H • Weight: 8,1 kg

23126003

DG 600, FRONT-R/H • Weight: 5,1 kg

23126004

23126001

23126002

23126003

23126004

DG 600, FRONT-L/H • Weight: 5,1 kg

292


I-5

DG LOCKING PILLARS №

Product name

DG LOCKING PILLARS DG 800 23128000

DG 800, SIDE • Weight: 9,9 kg

23128003

DG 800, FRONT-R/H • Weight: 6,7 kg

23128004

DG 800, FRONT-L/H • Weight: 6,7 kg

23128007

23128000

DG 800, REAR-R/H • Weight: 9,6 kg

23128008

DG 800, REAR-L/H • Weight: 9,6 kg

23128003

23128004

23128007

23128008

293


I-5 №

DG LOCKING PILLARS Product name

DG LOCKING PILLARS

• • • •

DG locking pillars for vehicles over 3,5 t DG steel pillars are extremely durable and easy-to-use Manufactured out of high-grade steel and treated with cataforetic paint Material choise results reduced weight

DG 400 and 600: • the rear pillar includes housing for rear dropside catch • supplied with bolt-on pillar supports DG 800 and 1000: • supplied with weld-on pillar supports • Material: painted steel • Color: black

23128010 DG 800 WITH TWO LOCKS 23128010

DG 800, SIDE • Weight: 9,9 kg

23128013

DG 800, FRONT-R/H • Weight: 6,7 kg

23128014

DG 800, FRONT-L/H • Weight: 6,7 kg

23128017

DG 800, REAR-R/H • Weight: 9,6 kg

23128018

23128013

23128014

23128017

23128018

DG 800, REAR-L/H • Weight: 9,6 kg

294


I-5

DG LOCKING PILLARS №

Product name

DG LOCKING PILLARS DG 1000 23121000

DG 1000, SIDE • Weight: 12,6 kg

23121003

DG 1000, FRONT-R/H • Weight: 8,2 kg

23121004

DG 1000, FRONT-L/H • Weight: 8,2 kg

23121007

23121000

DG 1000, REAR-R/H • Weight: 12,2 kg

23121008

DG 1000, REAR-L/H • Weight: 12,2 kg

23121003

23121004

23121007

23121008

295


I-5

KINNEGRIP LOCKING PILLARS

Product name

23012155

KEEPER K20 • Welding attachment • Material: untreated steel • Weight: 0,5 kg

23012156

KEEPER K20, RECESSED - LONG SIDE • Welding attachment • Material: untreated steel • Weight: 1,2 kg

23012157

KEEPER K20, RECESSED - SHORT SIDE • Welding attachment • Material: untreated steel • Weight: 1,3 kg

23012270

SIDE RAVE KEEPER K20 - FLAT • Welding attachment • Weight: 1,0 kg

296


KINNEGRIP LOCKING PILLARS №

Product name

24012277

SIDE RAVE KEEPER K20 - BOLT-ON • Weight: 0,6 kg

23034140

KINNEGRIP EXTENDENER K5, 120-325 • Material: untreated steel • Weight: 1,8 kg

23035010 -KBS

23035010

PILLAR FASTENER K5, 120 MM - SHORT SIDE • Material: untreated steel • Weight: 1,27 kg

PILLAR FASTENER K5, 120 MM - LONG SIDE • Material: untreated steel • Weight: 1,32 kg

297

I-5


I-5

KINNEGRIP LOCKING PILLARS

Product name

23035011

PILLAR FASTENER K5, 60 MM • Material: untreated steel • Weight: 0,9 kg

23080

SIDEBOARD CATCH K20 • • • •

23082

Material: painted steel Screws and counter plate included Suitable for profile 33280 Weight: 0,2 kg

SIDEBOARD CATCH K5, SS • Material: stainless steel • Screws and counter plate included • Weight: 0,2 kg

23083

SIDEBOARD CATCH K5 • Material: primed steel • Screws and counter plate included • Weight: 0,2 kg

24032164

END FITTING K20, FRONT • Weight: 0,01 kg

24032165

END FITTING K20, SIDE/REAR • Weight: 0,01 kg

298


KINNEGRIP LOCKING PILLARS №

Product name

23030250

KINNEGRIP K5 END FITTING, SIDE/REAR • Weight: 0,01 kg

23030260-H

KINNEGRIP K5 END FITTING, NARROW - RIGHT • Weight: 0,01 kg

23030260-V

KINNEGRIP K5 END FITTING, NARROW - LEFT • Weight: 0,01 kg

24730005

23030260-H

KINNEGRIP T50 300 MM, RIGHT • Weight: 0,55 kg

24730006

KINNEGRIP T50 300 MM END PIECE, RIGHT • Weight: 0,29 kg

24730055

KINNEGRIP T50 300 MM, LEFT • Weight: 0,55 kg

24730056

KINNEGRIP T50 300 MM END PIECE, LEFT • Weight: 0,29 kg

24730005

24730006

24730055

299

24730056

I-5


I-5 №

KINNEGRIP LOCKING PILLARS Product name

KINNEGRIP K20 LOCKING PILLARS KINNEGRIP K20-400 23204201

K20-400, SIDE • Weight: 7,9 kg

23204301

K20-400, FRONT-L/H • Weight: 2,5 kg

23204401

K20-400, FRONT-R/H • Weight: 2,5 kg

23204701

K20-400, REAR-L/H • Weight: 7,6 kg

23204801

K20-400, REAR-R/H • Weight: 7,6 kg

23204201

23204301

71

23204401

23204701

300

23204801


KINNEGRIP LOCKING PILLARS №

Product name

KINNEGRIP K20 LOCKING PILLARS KINNEGRIP K20-600 23206201

K20-600, SIDE • Weight: 9,8 kg

23206301

K20-600, FRONT-L/H • Weight: 3,1 kg

23206401

K20-600, FRONT-R/H • Weight: 3,1 kg

23206701

K20-600, REAR-L/H • Weight: 9,5 kg

23206801

K20-600, REAR-R/H • Weight: 9,5 kg

23206201

23206401

23206701

301

23206301

23206801

I-5


I-5 №

KINNEGRIP LOCKING PILLARS Product name

KINNEGRIP K20 LOCKING PILLARS KINNEGRIP K20-800 23208201

K20-800, SIDE • Weight: 12,0 kg

23208301

K20-800, FRONT-L/H • Weight: 4,0 kg

23208401

K20-800, FRONT-R/H • Weight: 4,0 kg

23208701

K20-800, REAR-L/H • Weight: 11,7 kg

23208801

K20-800, REAR-R/H • Weight: 11,7 kg

23208201

23208401

23208701

302

23208301

23208801


KINNEGRIP LOCKING PILLARS №

I-5

Product name

KINNEGRIP K20 LOCKING PILLARS KINNEGRIP K20-1000 23210201

K20-1000/2, SIDE • Weight: 14,2 kg

23210301

K20-1000, FRONT-L/H • Weight: 4,9 kg

23210401

K20-1000, FRONT-R/H • Weight: 4,9 kg

23210701

K20-1000, REAR-L/H • Weight: 13,5 kg

23210801

K20-1000, REAR-R/H • Weight: 13,5 kg

24210202

K20-1000 ALU, SIDE

23210201

23210301

• Weight: 7,6 kg

23210701

23210801

303

24210202

23210401


I-5 №

KINNEGRIP LOCKING PILLARS Product name

KINNEGRIP K20 LOCKING PILLARS KINNEGRIP K20-1200 23212201

K20-1200, SIDE • Weight: 16,8 kg

23212301

K20-1200, FRONT-L/H • Weight: 5,7 kg

23212401

K20-1200, FRONT-R/H • Weight: 5,7 kg

23212701

K20-1200, REAR-L/H • Weight: 15,7 kg

23212801

K20-1200, REAR-R/H • Weight: 15,7 kg

23212201

23212401

23212701

304

23212301

23212801


KINNEGRIP LOCKING PILLARS №

Product name

KINNEGRIP K5 LOCKING PILLARS KINNEGRIP 400/K5 23504201

400/K5, SIDE • Weight: 12,0 kg

23504301

400/K5, FRONT-L/H • Weight: 13,4 kg

23504401

400/K5, FRONT-R/H • Weight: 5,8 kg

23504701

KINNEGRIP 400/K5, REAR WIDE-L/H • Weight: 11,8 kg

23504801

KINNEGRIP 400/K5, REAR WIDE-R/H • Weight: 11,8 kg

23504201

23504301

23504401

23504701

305

23504801

I-5


I-5 №

KINNEGRIP LOCKING PILLARS Product name

KINNEGRIP K5 LOCKING PILLARS KINNEGRIP 600/K5 23506201

600/K5, SIDE • Weight: 12,0 kg

23506231

600/K5, SIDE - EXTENDABLE • Weight: 13,4 kg

23506301

600/K5, FRONT-L/H • Weight: 5,8 kg

23506401

600/K5, FRONT-R/H • Weight: 5,8 kg

23506201

23506231

23506301

306

23506401


KINNEGRIP LOCKING PILLARS №

Product name

KINNEGRIP K5 LOCKING PILLARS KINNEGRIP 600/K5 23506701

600/K5, REAR WIDE-L/H • Weight: 11,8 kg

23506801

600/K5, REAR WIDE-R/H • Weight: 11,8 kg

23506501

600/K5, REAR NARROW-L/H • Weight: 8,6 kg

23506601

600/K5, REAR NARROW R/H • Weight: 8,6 kg

23506701

23506501

23506801

307

23506601

I-5


I-5 №

KINNEGRIP LOCKING PILLARS Product name

KINNEGRIP K5 LOCKING PILLARS KINNEGRIP 800/K5 23508201

800/K5, SIDE • Weight: 13,6 kg

23508231

800/K5, SIDE - EXTENDABLE • Weight: 15,0 kg

23508261

800/K5/2, SIDE • Weight: 13,8 kg

23508271

800/K5/2, SIDE - EXTENDABLE • 15,0 kg

23508301

800/K5, FRONT-L/H • Weight: 7,4 kg

23508361

800/K5/2, FRONT-L/H

23508201

23508231

• Weight: 6,5 kg

23508261

23508271

23508301

308

23508361


KINNEGRIP LOCKING PILLARS №

Product name

KINNEGRIP K5 LOCKING PILLARS KINNEGRIP 800/K5 23508401

800/K5, FRONT-R/H • Weight: 7,4 kg

23508461

800/K5/2, FRONT-R/H • Weight: 6,5 kg

23508701

800/K5, REAR WIDE-L/H • Weight: 13,4 kg

23508761

800/K5/2, REAR WIDE-L/H • Weight: 13,4 kg

23508401

23508461

23508701

309

23508761

I-5


I-5 №

KINNEGRIP LOCKING PILLARS Product name

KINNEGRIP K5 LOCKING PILLARS KINNEGRIP 800/K5 23508801

800/K5, REAR WIDE-R/H • Weight: 13,4 kg

23508861

800/K5/2, REAR WIDE-R/H • Weight: 13,4 kg

23508561

800/K5/2, REAR NARROW-L/H • Weight: 6,5 kg

23508661

800/K5/2, REAR NARROW-R/H • Weight: 6,5 kg

23508801

23508861

23508561

310

23508661


KINNEGRIP LOCKING PILLARS №

Product name

KINNEGRIP K5 LOCKING PILLARS KINNEGRIP 1000/K5 23510201

1000/K5, SIDE • Weight: 16,0 kg

23510231

1000/K5, SIDE - EXTENDABLE • Weight: 16,9 kg

23510301

1000/K5, FRONT-L/H • Weight: 7,8 kg

23510401

1000/K5, FRONT-R/H • Weight: 7,8 kg

23510201

23510231

23510301

311

23510301

I-5


I-5 №

KINNEGRIP LOCKING PILLARS Product name

KINNEGRIP K5 LOCKING PILLARS KINNEGRIP 1000/K5 23510501

1000/K5, REAR NARROW-L/H • Weight: 8,6 kg

23510601

1000/K5, REAR NARROW-R/H • Weight: 8,6 kg

23510701

1000/K5, REAR WIDE-L/H • Weight: 15,5 kg

23510801

1000/K5, REAR WIDE-R/H • Weight: 15,5 kg

23510501

23510601

23510701

312

23510801


KINNEGRIP LOCKING PILLARS №

Product name

KINNEGRIP K5 LOCKING PILLARS KINNEGRIP 1200/K5 23512201

1200/K5, SIDE • Weight: 18,5 kg

23512301

1200/K5, FRONT-L/H • Weight: 9,1 kg

23512401

1200/K5, FRONT-R/H • Weight: 9,1 kg

23512701

1200/K5, REAR WIDE-L/H • Weight: 18,2 kg

23512801

1200/K5, REAR WIDE-R/H • Weight: 18,2 kg

23512201

23512401

23512701

313

23512301

23512801

I-5


I-5 №

MINIMATIC LOCKING DEVICES Product name

MINIMATIC LOCKING DEVICES • The number in the product name = dropside height • Used materials: aluminium and steel • Handle, mechanism and rod made out of steel

MINIMATIC 300 • Weight: 1,09 kg

24240

MINIMATIC 300-R/H

24241

MINIMATIC 300-L/H

R/H

MINIMATIC 400

L/H

• Weight: 1,27 kg

24260

MINIMATIC 400-R/H

24261

MINIMATIC 400-L/H

MINIMATIC 600 • Weight: 1,47 kg

24280

MINIMATIC 600-R/H

24281

MINIMATIC 600-L/H

MINIMATIC 800 • Weight: 1,68 kg

24290

MINIMATIC 800-R/H

24291

MINIMATIC 800-L/H

R/H MODELS Note! This image can be suited as mirror image also for L/H models.

314


MINIMATIC LOCKING DEVICES №

Product name

24295

COUNTERPIECE MINIMATIC I • Material: galvanized steel • Weight: 0,17 kg

24296

COUNTERPIECE MINIMATIC L • Material: galvanized steel • Weight: 0,09 kg

24297

COUNTERPIECE MINIMATIC, WELD-ON • Material: untreated steel • Weight: 0,05 kg

315

I-5


â&#x201E;&#x2013;

Product name

316


J RUBBER AND PLASTIC PRODUCTS DOOR SEALS J-1 RUBBER AND PLASTIC PRODUCTS J-2 RUBBER CORNERS J-3 SEAL FASTENING J-4 SEALINGS J-5


J-1 №

DOOR SEALS Product name DOOR SEAL • Packaging: 30 m Suitable for profiles: Dropside profiles 25 mm A-3: • 33220 • 33221 Profiles 30-50 mm B-8: • 35160 • 35161 • 35170 • 35171

58258

58258

DOOR SEAL 29 X 43 (147) • Weight: 0,4 kg/m

58259

DOOR SEAL 29 X 48 (147K ) • Weight: 0,4 kg/m

58260

DOOR SEAL 29 X 63 (147L) • Weight: 0,7 kg/m

58271

DOOR SEAL 44 X 90, 4500 MM • • •

Length: 4500 mm Weight: 1,0 kg/m Suitable for profile 35230 (Profiles 30-50 mm B-8)

35230

58272

DOOR SEAL 70 X 52 • Packaging: 30 m • Weight: 0,9 kg/m

58273

DOOR SEAL 80 X 51 • Packaging: 30 m • Weight: 0,8 kg/m

318

58259

58260


J-1

DOOR SEALS №

Product name DOOR SEAL • Packaging: 30 m Suitable for profiles: Dropside profiles 25 mm A-3: • 33230 • 33231 Profiles 30-50 mm B-8: • 35151 • 35153 • 35225

58266

58266

58267

DOOR SEAL 33 X 58 (8007) • Weight: 0,5 kg/m

58267

DOOR SEAL 33 X 90 F • Weight: 0,9 kg/m

58268

DOOR SEAL 30 X 43 (8244) • Weight: 0,5 kg/m

58269

DOOR SEAL 33 X 90 • Packaging: 30 m • Weight: 1,0 kg/m Suitable for profiles (Profiles 30-50 mm B-8): • 33230 • 33231 • 35151 • 35160 • 35161 • 35170 • 37171

58296

DOOR SEAL 33 X 75 • Packaging: 30 m • Weight: 0,5 kg/m Suitable for profiles (Profiles 30-50 mm B-8): • 33230 • 33231 • 35151 • 35160 • 35161 • 35170 • 37171

319

58268


J-1 №

DOOR SEALS Product name DOOR SEAL • Packaging: 30 m

58270

DOOR SEAL 16 X 32 • Weight: 0,2 kg/m • Suitable for profile 35225 (Profiles 30-50 mm B-8)

35225 58274

DOOR SEAL 50 X 44 • Weight: 0,6 kg/m • Suitable for profile 35230 (Profiles 30-50 mm B-8)

35230

58275

DOOR SEAL 40 X 44 • Weight: 0,6 kg/m • Suitable for profile 35230 (Profiles 30-50 mm B-8)

35230

58277

DOOR SEAL 33 X 20/13 • Packaging: 50 m • Weight: 0,3 kg/m Suitable for profiles (Profiles 30-50 mm B-8): • 35147 • 35148

58428

35147 35148

DOOR SEAL 27 X 25 • Length: 4,5 m • Weight: 0,17 kg/m Suitable for profiles (Dropside profiles 25 mm A-3): • 33227 • 33228 • 33229

33227 33228 33229

320


RUBBER AND PLASTIC PRODUCTS №

J-2

Product name

RUBBER BUFFER 58300

RUBBER BUFFER 255 • Weight: 0,61 kg

58302

RUBBER BUFFER 320/35 X 60 • Weight: 0,85 kg

58303

RUBBER BUFFER 450 X 40 X 60

RUBBER BUFFER 270 58305

RUBBER BUFFER 270 • Weight: 1,14 kg

58306

58305

RUBBER BUFFER 270/T • Includes steel reinforcement • Weight: 1,60 kg

RUBBER BUFFER 270/M

58306

• Weld mounting • Weight: 1,27 kg

58307

RUBBER BUFFER 270/M • Background plate out of untreated steel

58308

RUBBER BUFFER 270/RST • Background plate out of stainless steel

58307, 58308

321


J-2

RUBBER AND PLASTIC PRODUCTS

Product name

58309

RUBBER BUFFER 196X58X54 • Fastening holes Ø: 13 mm • Hole spacing: 115 mm • Weight: 0,61 kg

RUBBER BUFFER RE-ROLL • Hot-dip galvanized frame • Bolt mounting

58311

RUBBER BUFFER RE-ROLL • 2 adjacent rubber rolls • Weight: 6,1 kg

58313

RUBBER BUFFER RE-ROLL VERTICAL 2R • 2 overlapped rubber rolls • Weight: 5,5 kg

322


RUBBER AND PLASTIC PRODUCTS №

Product name

58310

ELASTIC RUBBER 171/95 • Bolt mounting • Weight: 0,81 kg

58314

AXLE FOR RE-ROLL • Includes pin and washer • Weight: 0,9 kg Spare part for products: • 58311 • 58313

58312

RUBBER ROLL FOR RE-ROLL • Roll: Ø 100 mm, width 80 mm • Hole: Ø 25,5 mm • Weight: 1,0 kg Spare part for products: • 58311 • 58313

58321

RUBBER HOLDER 216 • Suitable for Ø 35 mm pipe • Weight: 0,1 kg

58322

PLATE FOR RUBBER HOLDER 217 • Suitable for rubber holder 58321 • Weight: 0,2 kg

323

J-2


J-2 №

RUBBER AND PLASTIC PRODUCTS Product name RUBBER BUFFER D

58330

RUBBER BUFFER D 33 X 46 • A x B x C x D = 46 x 33 x 30 x 15 mm • Storage length: 5,0 m • Weight: 1,3 kg

58331

RUBBER BUFFER D 50 X 80 • A x Bx C x D = 80 x 50 x 35 x 18 mm • Storage length: 5,0 m • Weight: 2,7 kg

58333

RUBBER BUFFER D 94 X 114 • A x B x C x D = 114 x 94 x 50 x 44 mm • Storage length: 2,6 m • Weight: 18,0 kg

FLAP RUBBER • • • • •

58410

Width: 600 mm Length:10 m Color: black Rubber quality SBR Hardness 70 Shore A

FLAP RUBBER 5/600 • Thickness: 5 mm • Weight: 5,0 kg/m

58411

FLAP RUBBER 6/600 • Thickness: 6 mm • Weight: 6,0 kg/m

324


RUBBER AND PLASTIC PRODUCTS №

Product name CURTAIN KEEPER 101

58460

CURTAIN KEEPER 101/275 • Overall length: 275 mm • Weight: 0,04 kg

58462

CURTAIN KEEPER 101/375 • Overall length: 375 mm • Weight: 0,05 kg

58470

PLASTIC PLUG 105 • Weight: 0,01 kg Counterpiece for curtain keepers: • 58460 • 58462

58471

HOOK 106 • Weight: 0,01 kg Counterpiece for curtain keepers: • 58460 • 58462

65308

VENTILATOR G1 - WHITE • • • • •

Surface-mounting Waterproof Material: glass fiber reinforced nylon Size: 265 (200) x 208 x (145) x 24 mm Weight: 0,50 kg

325

J-2


J-2

RUBBER AND PLASTIC PRODUCTS

Product name

65314

VENTILATOR 67 X 203 • • • • •

65316

Equipped with surge plates Surface-mounting Color: white Material: PVC Weight: 0,07 kg

STEEP HANDLE • Material: steel-reinforced PUR • Color: black • Weight: 0,41 kg

65320

DOCUMENT TUBE • • • •

65321

Shockproof and freezeproof Color: black, red cap Material: PE Weight: 0,95 kg

PLASTIC HANDLE • • • • •

Sustainable, max load 500 kg Includes installation screws and protection caps Material: steel-reinforced TPE Color: black Weight: 0,16 kg

326


RUBBER CORNERS №

Product name CORNER FITTING TMT • • • • • •

35124

Mounting on profile Fast and easy to install Invisible joints Material: polyurethane (PU) Color: grey, RAL 9006 Weight: 0,15 kg

35124

CORNER FITTING, 100 X 100 Suitable for profiles: • 35120 • 35121 • 35130 • 35131

35125

CORNER FITTING, 125 X 125

35126

CORNER FITTING, 155 X 155

35125

35126

Suitable for profiles: • 35120 • 35121 • 35130 • 35131

35127

CORNER FITTING, 155 X 95 MM R/H

35127

• Right side

35128

CORNER FITTING, 155 X 95 MM L/H • Left side

35128

35129

CORNER FITTING WITH LIGHT BASE 140 X 90 • Corner fittings and light bases can be installed horizontally or vertically • Weight: 0,42 kg • Suitable for profile 35108

327

J-3


J-4

SEAL FASTENING

Product name

58285

FASTENING RAIL 32 X 9 • Material: aluminium • Length: 2,6 m • Weight: 0,6 kg/m Compatible sealings (Sealings J-5): • 58283 • 58284 • 58297

58295

58283 58284 58297

FASTENING RAIL FOR THRESHOLD SEAL • Length: 2585 mm • Material: galvanized steel • Weight: 4,2 kg • Compatible sealing 58294 (Sealings J-5)

58294

328


SEALINGS №

Product name SIDEBOARD GASKET Suitable for profiles: Profiles 30-50 mm A-8: • 35151 Dropside profiles 25 mm A-3: • 33171 • 33182 • 33183 • 33275 • 33276 • 33247 • 33248 • 33230 • 33231

58276

SIDEBOARD GASKET 16 X 9,5 • Packaging: 60 m • Weight: 0,1 kg/m

58278

SIDEBOARD GASKET 22 X 19 • Packaging: 30 m • Weight: 0,2 kg/m

58262

SIDEBOARD GASKET 18 X 12 • • •

Packaging: 30 m Weight: 0,1 kg/m Suitable for profile 33164 (Dropside profiles 25 mm A-3)

33164

58279

SIDEBOARD GASKET 15 X 25,5 • • •

Packaging: 30 m Weight: 0,1 kg/m Suitable for profile 33165 (Dropside profiles 25 mm A-3)

33165

329

J-5


J-5

SEALINGS

Product name

58286

SIDE BOARD GASKET K-20 • Weight: 0,1 kg/m Suitable for profiles (Dropside profiles 25 mm A-3): • 33278 • 33280

58283

33278 33280

REAR BOARD GASKET 33 X 37 • • •

Packaging: 30 m Weight: 0,5 kg/m Suitable for fastening rail 58285 (Seal fastening J-4)

58285

58284

REAR BOARD GASKET 33 X 51 • • •

58297

58285

PLATFORM SEAL 44 X 50 • • •

58293

Packaging: 30 m Weight: 0,8 kg/m Suitable for fastening rail 58285 (Seal fastening J-4)

Packaging: 30 m Weight: 1,4 kg/m Suitable for fastening rail 58285 (Seal fastening J-4)

58285

GASKET FOR ALUBOX • Weight: 0,1 kg/m

330


SEALINGS №

Product name

58294

TRESHOLD SEAL 42 X 70 • • •

Length: 2,6 m Weight: 3,2 kg Suitable for fastening rail 58295 (Seal fastening J-4)

58295

331

J-5


â&#x201E;&#x2013;

Product name

332


K SCREWS, NUTS AND RIVETS


K-1 №

№ 64302 64334 64335 64336 64343 64400 64405

№ 64410 64413 64424

№ 64425 64426 64427 64428 64429 64430 64435 64440 64442

SCREWS, NUTS AND RIVETS Product name

Product name Platescrew 4,8 x 19 Socket head cap M8 x 25 Socket head cap M8 x 20 Socket head cap M8 x 16 Socket head cap M10 x 40 Kzn Cup square bolt M6 x 20 Selfdrilling screw M 6,3 x 60-ZP

Product name Nut M6 Zn, DIN 934 Nut M10 Kzn, DIN 934 Tee nut M8

Product name Distance nut M8 x 17 Al Distance nut M8 x 22.3 Al Distance nut M8 x 22.3 ZP Distance nut M8 x 25 Al Distance nut M8 x 45 Al Distance nut M8 x 13 Al Distance nut - MonoLock Distance nut M8 x 27 Al Distance nut M8 x 32 Al

L (mm)

AV (mm) Description

19,0 25,0 20,0 16,0

5,0 5,0 5,0 5,0

40,0

17,0

20,0

10,0

galvanized countersunk head countersunk head countersunk head hot-dip galvanized DIN 933 8.8 galvanized

60,0

5,0

electrogalvanized

AV (mm) Description 10,0 17,0

B (mm) 17,0 22,3 22,3 25,0 45,0 13,0 23,5 27,0 32,0

galvanized DIN 934 hot-dip galvanized DIN 934

AV (mm) ØA (mm) Description 5,0 5,0 5,0 5,0 5,0 5,0 6,5 5,0 5,0

12,5 12,5 12,5 12,5 12,5 12,5 17,5 12,5 12,5

D-measurement of distance nut is B+3,5 mm.

334

electrogalvanized

slotted plastic

Packing size

Weight (kg)

200 pcs. 100 pcs. 100 pcs. 100 pcs.

0,01 0,01 0,01 0,01

100 pcs.

0,01

200 pcs.

0,01 0,01

Packing size

Weight (kg)

200 pcs. 100 pcs.

0,01 0,01 0,01

Weight (kg) 0,02 0,02 0,02 0,01 0,02 0,02 0,01 0,02 0,02


SCREWS, NUTS AND RIVETS №

Product name

Product name

64501 64506

Body plate 6 x 20 Zn Body plate M12 x 40 ZP

64510

Washer M10 Kzn, DIN 126

№ 64600 64607 64609 64610 64611 64700 64701

№ 64612 64613 64614 64615 64616 64617 64650 64652

K-1

Product name Tension rivet 4.9 x 10 SS Tension rivet 5 x 12 Al Tension rivet 4,9 x 24 Al Tension rivet 4,9 x 12 Al An Tension rivet 4,9 x 16 Al flange 14 Tension rivet Monopan 4,8 x 24 Al Tension rivet Monopan 5,0 x 22,6 Al

Product name Rivet 5,0 x 28,0 Al Rivet 5,0 x 30,0 Al Rivet 6,0 x 30,0 Al Rivet 5,0 x 30,0 steel Rivet 6,0 x 30,0 steel TIR rivet 4,9 x 16,5 Al/SS Monobolt rivet 6,4 x 15 Monobolt rivet 6,4 x 20

Length (mm)

Ø

Description

Packing size

Weight (kg)

20,0 40,0

6,0 12,0

galvanized electrogalvanized

100 pcs.

0,01 0,01

10

hot-dip galvanized DIN 126

100 pcs.

0,01

Length (mm)

Ø

Description

Weight (kg)

10,0 12,0 24,0 12,0 16,0 24,0 22,6

4,9 5,0 4,9 4,9 4,9 4,8 5,0

stainless steel

anodized

0,01 0,01 0,01 0,01 0,02 0,01 0,01

Length (mm)

Ø

Description

Weight (kg)

28,0 30,0 30,0 30,0 30,0 16,5 15,0 20,0

5,0 5,0 6,0 5,0 6,0 4,9 6,4 6,4

aluminium aluminium aluminium steel steel aluminium/stainless steel

0,01 0,01 0,01 0,005 0,01 0,01 0,009 0,011

335


â&#x201E;&#x2013;

Product name

336


L SIGNS AND TAPES ADR SIGNS L-1 CONSPICUITY TAPES L-2 SIGNS AND MARKER BOARDS L-3 SPECIAL TRANSPORT L-4


L-1 №

ADR SIGNS Product name

ADR SIGNS • Width: 400 mm • Height: 300 mm

63310

ADR SIGN, SS • Weight: 0,8 kg

HORIZONTALLY FOLDABLE ADR SIGN • Weight: 0,6 kg

63306

HORIZONTALLY FOLDABLE, AL

63307

HORIZONTALLY FOLDABLE, SS

63309

HORIZONTALLY FOLDABLE, PV-MODEL

ADR-SIGN, VERTICALLY FOLDABLE • Weight: 0,6 kg

63308

VERTICALLY FOLDABLE, AL

63313

VERTICALLY FOLDABLE, AL + SS HINGES

63311

ADR SIGN 30/1202-33/1203, SS • 30-1202: diesel fuel, diesel oil, gasoil - unspecified • 33-1203: gasoline, petrol, motor spirit, motor fuel • Weight: 2,0 kg

63334

ADR SIGN, VARIOUS, SS • Available with multiple number combinations • Weight: 0,8 kg

338


ADR SIGNS №

Product name

63320

ADR SIGN 3-IN-1 • Manufactured by request with desired number combinations • Material: stainless steel • Weight: 0,8 kg

63302

BASE PLATE FOR ADR SIGN • Material: stainless steel • Weight: 0,4 kg

63330

ADR DIGIT SET • Material: stainless steel • Weight: 2,2 kg Package includes: • 1 pc: X • 3 pcs: 1, 2, 3, 4, 5, 7, 8, 0 • 4 pcs: 6 • 4 pcs: blank 47 mm wide • 6 pcs: blank 94 mm wide

63335

ADR DIGITS, SINGLE • Material: stainless steel • Weight: 0,1 kg

339

L-1


L-1 №

ADR SIGNS Product name ADR SIGN FRAME • Weight: 0,6 kg • Width: 400 mm • Height: 300 mm

63300

FRAME, STAINLESS STEEL • Includes ADR sign holder 63305

63303

FRAME, PAINTED STAINLESS STEEL • Bicma code: 91295 • Color: black

63305

HOLDER FOR ADR SIGN • Weight: 0,01 kg • As strandard in ADR sign frame 63300

63322

INTERCHANGEABLE ADR SIGN • Weight: 3,03 kg

63341

COVER FOR INTERCHANGEABLE ADR SIGN • Weight: 0,30 kg

63304

TURNSTILE FOR FOLDABLE ADR-SIGN • Weight: 0,01 kg • Two options: small (Bicma) or large (Mazon) model

340


CONSPICUITY TAPES №

Product name CONSPICUITY TAPES • • • • • • •

Adhesive tape for vehicle contour marking Complies with ECE 104 category C requirements Roll size: 50 mm x 50 m Material: treated polyester Installation temperature 15-38 ° C, drying time 1 hour Storage at room temperature Weight: 1.0 kg

• For side and rear marking • NOTE! Red tapes (63703, 63710 and 63763) are suitable only for rear marking

63701

YELLOW

63702

SILVER

63703

RED

CONSPICUITY TAPE FOR TANKS 63712

YELLOW

63711

SILVER

63710

RED

CONSPICUITY TAPE FOR CURTAIN 63761

YELLOW

63762

SILVER

63763

RED

341

L-2


L-3

SIGNS AND MARKER BOARDS

Product name

63010

REAR MARKING E-1132 • • • •

63011

Material: aluminium + plastic ends Width: 1132mm Height: 197 mm Weight: 0,90 kg

REAR MARKING E-1132 K • • • • •

Straight model, does not include end pieces Material: aluminium Width: 1130 mm Height: 196 mm Weight: 0,80 kg

REAR MARKING E-566 K, PAIR • Width: 565 mm • Height: 196 mm • Includes two signs

63016

REAR MARKING E-566 K, AL • Weight: 0,80 kg

63017

REAR MARKING E 566K, ADHESIVE • Weight: 0,02 kg

63021

REAR MARKING E-283 K, SET • • • •

Material: aluminium Size: 285 x 196 mm Includes four signs Weight: 1,39 kg

342


SIGNS AND MARKER BOARDS №

Product name

63026

REAR MARKING T-1132 K • • • •

Material: aluminium Width: 1130 mm Height: 132 mm Weight: 0,47 kg

REAR MARKING T-566 K, PAIR • Width: 565 mm • Height: 132 mm

63031

REAR MARKING T-566 K, ALU • Weight: 0,89 kg

63032

REAR MARKING T-566 K, ADHESIVE • Weight: 0,01 kg

REAR MARKING T-283, SET • • • • •

Material: aluminium Width: 282 mm Height 132 mm Set includes two right-hand and two left-hand side plates Weight: 0,85 kg

63035

REAR MARKING T-283 WITH EDGING

63040

REAR MARKING T-283

63104

LENGTH SIGN RED/WHITE • • • • •

Material: aluminium Delivered in pairs Length: 705 mm Width: 140 mm Weight: 0,80 kg

343

L-3


L-3 №

SIGNS AND MARKER BOARDS Product name SPEED SIGN STICKER • Weight: 0,01 kg

63114

SPEED SIGN, 40 KM/H

63116

SPEED SIGN, 50 KM/H

63118

SPEED SIGN, 60 KM/H

63120

SPEED SIGN, 80 KM/H

63122

SPEED SIGN, 100 KM/H

63130

ADHESIVE SIGN, NARROW CARGO SPACE • Size: 200 x 200 mm • Weight: 0,01 kg

BASE PLATE FOR WARNING SIGN

63158

BASE PLATE, STAINLESS STEEL 250 X 250 • Weight: 0,35 kg

63158 63155

BASE PLATE, ALUMINIUM 300 X 300 • Weight: 0,30 kg

63157

BASE PLATE, STAINLESS STEEL 300 X 300 • Weight: 0,40 kg

63155, 63157

344


SIGNS AND MARKER BOARDS №

Product name WARNING SIGN • Adhesive PVC sign • Size: 30 x 30 cm • Weight: 0,03 kg

63150-1

63150-1,4

63150-1,5

63150-1,6

63150-2,1

63150-2,2

63150-2,3

63150-3

63150-4,1

63150-4,2

63150-4,3

63150-5,1

63150-5,2

63150-6,1

63150-6,2

63150-7D

63150-8

63150-9

63150-MP

63150-TMP

345

L-3


L-3

SIGNS AND MARKER BOARDS

Product name

63110

SMW-PLATE, ALUMINIUM • • • •

63111

Material: aluminium Width: 365 mm Height: 365 mm Weight: 0,35 kg

PLATFORM FLAG SET • For tail lifts • Weight: 0,05 kg Includes: • 1 pc. flag to left 250 x 400 mm • 1 pc. flag to right 250 x 400 mm • 2 pcs. fastening rail 250 mm

CONSOLE FOR WARNING SIGN 63153

CONSOLE 250 X 250 • Material: stainless steel • Size: 250 x 250 mm • Weight: 0,65 kg

CONSOLE 300 X 300 • Size: 300 x 300 mm

63152

CONSOLE, ALUMINIUM • Weight: 0,28 kg

63154

CONSOLE, STAINLESS STEEL • Weight: 0,65 kg

63151

KEEPER FOR WARNING SIGN CONSOLE • Spare part for consoles 63152 and 63154 • Weight: 0,01 kg

346


SIGNS AND MARKER BOARDS №

Product name

63153VR

CONSOLE FOR WARNING SIGN, SS

63221

• Material: stainless steel • Weight: 1,22 kg

WIDE, YELLOW LICENSE PLATE FRAME • • • •

Material: PVC Size: 165 x 490 x 5 mm Suitable for EU signs Weight: 0,14 kg

347

L-3


L-4

SPECIAL TRANSPORT

Product name

63209

SIGN BOARD CONSOLE, TWO-SIDED • • • • • •

Suitable for acrylic special transport signs Size: 1005 x 505 x 120 mm Weight: 3,8 kg Material: aluminium Approval number: Tp-12/1991 Bulbs: 8 pcs. BA15s, 15 W

SPECIAL TRANSPORT SIGN PLATE • Suitable for sign board console 63209 • Material: acrylic • Weight: 1,8 kg

63216

KORKEA KULJETUS

63213

PITKÄ KULJETUS

63217

LEVEÄ KULJETUS

63216

63213

63217

63140

SIGN: VARNING, ACRYLIC • Weight: 1,8 kg

348


SPECIAL TRANSPORT №

Product name SIGN: BRED LAST • Width: 1000 mm • Height: 500 mm • Weight: 1,80 kg

63227

BRED LAST, ACRYLIC

63228

BRED LAST, ALUMINIUM - REFLECTIVE

349

L-4


â&#x201E;&#x2013;

Product name

350


M SLIDING ROOFS AND SIDE CURTAINS COMBILINER M-1 MEGALINER M-2 SESAM COMPONENTS AND ACCESSORIES M-3 SIDE CURTAIN ACCESSORIES M-4


M-1 №

COMBILINER Product name

SESAM COMBILINER EC4 SLIDING ROOF Sliding roof with opening from back to front. Delivery includes: • folding plates (56284 / 56285 / 56286) * • cross members; model Universal * • 1 pc. accessory kit (56200) for rails 56099, 56100, 56102 and 56103 • 1 pc. accessory kit (56202) for rail 56104 • 1 pc. opening handle 8925, 2400 mm (56330) • rear header (56249 / 56250) with collapsible back beam: 40 x 80 mm *) quantity depends on the total length of the roof Please provide your roof width 2550 / 2600 and total length when placing the order.

56011

COMBILINER EC4 2600 X 6000-7199 MM

56012

COMBILINER EC4 2600 X 7200-7999 MM

56013

COMBILINER EC4 2600 X 8000-9999 MM

56014

COMBILINER EC4 2600 X 10000-11999 MM

56015

COMBILINER EC4 2600 X 12000-12999 MM

56016

COMBILINER EC4 2600 X 13000-13999 MM

352


COMBILINER №

Product name

SESAM COMBILINER EC5 SLIDING ROOF Sliding roof with opening to two directions. Delivery includes: • folding plates (56284 / 56285 / 56286) * • cross members, model Universal * • 1 pc. opening handle 8925, 2400 mm (56330) • rear header (56249 / 56250) with collapsible back beam: 40 x 80 mm • front header EC5 (56232 / 56233) • accessory kit for front header EC5 Combliliner ’02 (56337) *) quantity depends on the total length of the roof Please provide your roof width 2550 / 2600 and total length when placing the order.

56051

COMBILINER EC5 2600 X 6000-7199 MM

56052

COMBILINER EC5 2600 X 7200-7999 MM

56053

COMBILINER EC5 2600 X 8000-9999 MM

56054

COMBILINER EC5 2600 X 10000-11999 MM

56055

COMBILINER EC5 2600 X 12000-12999 MM

56056

COMBILINER EC5 2600 X 13000-13999 MM

353

M-1


M-2 №

MEGALINER Product name

SESAM MEGALINER SLIDING ROOF Sliding roof with opening from back to front. Delivery includes: • folding plates (56284 / 56285 / 56286) * • cross member, model Megaliner * • 1 pc. accessory kit Megaliner (56203) • 1 pc. opening handle 8925, 2400 mm (56330) • rear header (56243 / 56245) with collapsible back beam: 40 x 80 mm • fixed front header Megaliner (56230 / 56231) • if installing against bulkhead: mounting pieces for track (56342 / 56343) • steel track 8360, 7200 mm (56112) * • track extension (56362) * and locking device (56364) * *) quantity depends on the total length of the roof Please provide your roof width 2550 / 2600 and total length when placing the order.

56061

MEGALINER 2600 X 6000-7199 MM

56062

MEGALINER 2600 X 7200-7999 MM

56063

MEGALINER 2600 X 8000-9999 MM

56064

MEGALINER 2600 X 10000-11999 MM

56065

MEGALINER 2600 X 12000-12999 MM

56066

MEGALINER 2600 X 13000-13999 MM

354


SESAM COMPONENTS AND ACCESSORIES №

Product name

COMBILINER COMPONENTS COMBILINER RAIL 88,5 X 98 MM • Material: untreated aluminium • Structure height: 128 / 112 mm

56099

RAIL, 8500 MM • Length: 8500 mm • Weight: 59,0 kg

56100

RAIL, 13700 MM • Length: 13700 mm • Prestressed: bend 450 mm • Weight: 93,0 kg

COMBILINER ROOF RAIL • Material: aluminium

56104

ROOF RAIL 354804 AL, 8500 MM • Length 8500 mm • Weight: 18,3 kg

56106

56104

ROOF RAIL 20544 AL, 8500 MM • Length 8500 mm • Weight: 64,6 kg

56107

ROOF RAIL 20544 AL, 13700 MM • Length 13700 mm • Weight: 102,6 kg

56106, 56107

355

M-3


M-3

SESAM COMPONENTS AND ACCESSORIES

Product name

56200

ACCESSORY KIT FOR CL • Kit is included in Combiliner sliding roof delivery • Suitable for Combiliner rails 56099 and 56100 • Weight: 2,4 kg Delivery content: • 4 pcs. of the rear trolley locking wedge • 2 pcs. retainer chain 500 mm • 2 pcs. clamp for rear balk • 2 pcs. of wear plate Combiliner • bolts and nuts for attaching components • 30 pcs. of blanket rivets / washers

56202

ACCESORY KIT FOR EC4 • Kit is included in Combiliner-sliding roof delivery • Suitable for rail 56104 • Weight: 2,4 kg Delivery content: • 4 pcs. of the rear trolley locking wedge • 2 pcs. retainer chain 500 mm • 2 pcs. ckano for rear balk • 2 pcs. of wear plate • bolts and nuts for attaching components • 30 pcs. of blanket rivets / washers

56337

ACCESSORY KIT FOR CL EC5 • Suitable for Combiliner rails 56099 and 56100 • Weight: 1,4 kg

356


SESAM COMPONENTS AND ACCESSORIES №

Product name

56308

SAFE PILLAR 2350-3000 MM • • • • • •

Easy to handle, patented locking mechanism Pillars are delivered without plank holders Meets the standard VDI 2700 up to 2800 mm pole length Length: 2350-3000 mm Suitable for Combi Liner rails Weight: 26,60 kg

PLANK HOLDER SESAM • For safe pillar 56308 • Weight: 0,14 kg

56500

PLANK HOLDER, SHORT - L/H

56501

PLANK HOLDER, SHORT - R/H

56502

PLANK HOLDER, LONG - PAIR

56340

MOUNTING SET FOR CL • Mounting kit for Sesam Combiliner rails • Weight: 9,00 kg

357

M-3


M-3 №

SESAM COMPONENTS AND ACCESSORIES

Product name FRONT HEADER CL & HL, EC5 • Weight: 20,0 kg

56232

FRONT HEADER - 2600

56233

FRONT HEADER - 2550

56249

MOVING PART HL&CL - 2550 • Weight: 34,0 kg

56260

CROSS MEMBER TUBE CL EC4/EC5 • Weight: 2,80 kg

56264

BEARING FOR ROOF BRACKET EC4/EC5 • M6x30 mm, 609Z • Weight: 0,05 kg

358


SESAM COMPONENTS AND ACCESSORIES №

Product name

56265

DOUBLE BEARING FOR EC4/EC5 • M8x28 mm, 2 x 609Z • Weight: 0,05 kg

56267

BEARING FOR ROOF BRACKET EC4/EC5 • M6x23 mm, 609Z • Weight: 0,05 kg

56301

PILLAR BRACKET CL • • • • •

56310

Material: aluminium / steel Weight: 2,80 kg Bracket for pole included Steel bearing Not suitable for Safe pillars

CURTAIN SIDE ROLLER 8956 CL • Suitable for Combiliner rails • Material: steel • Weight: 0,2 kg

359

M-3


M-3

SESAM COMPONENTS AND ACCESSORIES

Product name

56345

CURTAIN SIDE ROLLER 4800 • Suitable for Sesam Combiliner rails • Material: steel • Weight: 0,1 kg

56335

RUBBER PELMET 8960, 6 MM • • • • •

56351

Material: PVC Color: black Length: 28,0 m Sesam CL ’00 compatible Weight: 0,8 kg/m

LOCKING WEDGE FOR REAR HEAD, CL • Weight: 0,3 kg

360


SESAM COMPONENTS AND ACCESSORIES №

Product name

MEGALINER COMPONENTS 56203

ACCESSORY KIT FOR ML • Kit is included in Megaliner sliding roof delivery • Weight: 2,4 kg Delivery content: • 2 pcs. retainer chain 500 mm (56346) • 1 pc. locking device - R/H front (56354) • 1 pc. locking device - L/H front (56356) • 1 pc. lock piece for rear support - R/H (56368) • 1 pc. lock piece for rear support - L/H (56370)

REAR HEADER ML, COMPLETE 56243

REAR HEADER 40 X 80 / 2550 MM • Weight: 34,0 kg

56245

REAR HEADER 40 X 80 / 2600 MM • Weight: 36,0 kg

56112

STEEL TRACK ML 8360 WITH NOSE, 7200 MM • • • •

56261

Material: steel Length: 7200 mm Weight: 27,5 kg Note! Tracks are included in the Megaliner sliding roof delivery

CROSS MEMBER TUBE ML • Weight: 2,9 kg

361

M-3


M-3

SESAM COMPONENTS AND ACCESSORIES

Product name

56266

BEARING FOR ROOF BRACKET ML • M6x30, 6300Z • Weight: 0,05 kg

56270

END BRACKET/REAR HEADER ML, R/H • Weight: 5,67 kg

56293

SLIDING BRACKET ML, PUSH-IN • Weight: 0,70 kg

MOUNTING BRACKET FOR TRACK/BULKHEAD ML • Weight: 0,37 kg

56342

MOUNTING BRACKET - R/H

56343

MOUNTING BRACKET - L/H

56362

TRACK BRACKET ML • Weight: 0,10 kg

362


SESAM COMPONENTS AND ACCESSORIES №

Product name

56364

TRACK BRACKET LOCKING ML • Weight: 0,40 kg

363

M-3


M-3 №

SESAM COMPONENTS AND ACCESSORIES

Product name

ACCESSORIES FOLDING PLATE • Weight: 0,2 kg

56281

FOLDING PLATE 400 MM

56282

FOLDING PLATE 500 MM

56284

FOLDING PLATE 400 MM, PUSH-IN

56285

FOLDING PLATE 500 MM, PUSH-IN

56286

FOLDING PLATE 600 MM, PUSH-IN

56287

FOLDING PLATE 700 MM, PUSH-IN

56281, 56282

56284, 56285, 56286, 56287

56289

SLIDING BRACKET UNIVERSAL, PUSH-IN • Weight: 0,7 kg

56297

WASHER FOR ROOF CANOPY • Weight: 0,1 kg

56312

CURTAINSIDE TENSIONER 40 • • • •

Material: steel Weld mounting Measurements: 40 x 40 x 73 mm Weight: 0,62 kg

364


SESAM COMPONENTS AND ACCESSORIES №

Product name

56311

CAM FOR TENSIONER 40 • • • •

56317

Suitable for curtainside tensioner 56312 Material: yellow zinc chromate plated steel Measurements: 228 x 114 x 18 mm Weight: 0,60 kg

CURTAINSIDE TENSIONER, TELESCOPE • Adjustable handle length • Screw mounting • Weight: 2,6 kg

56318

SECTION FOR TENSIONER 56317 • Material: untreated aluminium • Length: 3250 mm • Weight: 14,0 kg

56330

DRAWBAR 8925, 2400 MM • Suitable for all Sesam sliding roofs • Weight: 2,7 kg

56334

RUBBER PELMET UNIVERSAL • • • •

56344

Material: silicone rubber Color: black Length: 9,0 and 14,0 m Weight: 0,6 kg/m

BUMPER/ASSEMBLING SETS • Weight: 0,1 kg

365

M-3


M-3 №

SESAM COMPONENTS AND ACCESSORIES

Product name OVERCENTER BUCKLE 1031 • Length: 650 mm

56320

BUCKLE 1031 COMPLETE, SS • Material: stainless steel • Weight: 0,43 kg

56321

BUCKLE 1031 COMPLETE, ZP

56320

• Material: galvanized steel • Weight: 0,46 kg

56324

STRAP 1031 ZP+ BUCKLE SS

56321

• Material: galvanized steel, stainless steel • Weight: 0,46 kg

56322

STRAP 1031, ZP

56324

• Material: galvanized steel • Weight: 0,15 kg

56323

STRAP 1031, SS • Material: stainless steel • Weight: 0,15 kg

56332

STRAP 1031, ZP • Material: galvanized steel • Weight: 0,15 kg

56333

56322

56323

56332

PLASTIC FIXING PLATE • Weight: 0,02 kg

56333-2 WASHER FOR FIXING PLATE • Weight: 0,12 kg

56333

366

56333-2


SESAM COMPONENTS AND ACCESSORIES №

M-3

Product name OVERCENTER BUCKLE 1032 • Weight: 0,20 kg

56325

BUCKLE 1032, SS • Material: stainless steel

56326

BUCKLE 1032, ZP

56325

• Material: galvanized steel

56319

56326

CURTAIN SIDE FASTENING PROFILE • Material: untreated aluminium • Length: 3300 mm • Weight: 2,75 kg/m

56328

TENSION PROFILE FOR SIDE CURTAIN • Material: untreated aluminium • Length: 3300 mm, Ø 27 mm • Weight: 3,0 kg/m

END PIECE • Suitable for profile 56328 • Weight: 0,1 kg

56331

LOWER PIECE 27 MM

56327

UPPER PIECE 27 MM

56329

LOWER PIECE 27 / 35 MM • Adapter Ø 27 / 35 mm

56331

367

56327

56329


M-3

SESAM COMPONENTS AND ACCESSORIES

Product name

56303

MOUNTING KIT • • • • •

56304

3 pcs. M10 x 25 8.8 ISO 7380 3 pcs. M10 8.8 DIN 985 2 pcs. bushing 20 4 pcs. rivet 6,4 x 23,7 Weight: 0,3 kg

LP-2 ROLLER • Weight: 0,27 kg

56305

CHASSIS HOOK 6115 • Weight: 0,83 kg

56514

LP3 TOP PIECE • Weight: 0,60 kg

56516

LP3 TOP PIECE SCREW SET • Weight: 0,30 kg

368


SESAM COMPONENTS AND ACCESSORIES №

Product name GAS SPRING FOR REAR HEAD MECHANISM

56377

GAS SPRING 400 N • Length: 92 / 147 mm • Weight: 0,1 kg

56379

GAS SPRING 600 N • Length: 105 / 157 mm • Weight: 0,2 kg

56378

GAS SPRING 700 N • Length: 134 / 205 mm • Weight: 0,4 kg

56600

C STEEL TRACK 50 X 40 X 2 • Material: untreated steel • Length 6,0 m • Weight: 2,2 kg

56606

SLIDING BRACKET, HIGH • • • •

Bearings made of steel Suitable for C steel track 56600 Material: electrogalvanized steel Weight: 0,3 kg

369

M-3


M-4

SIDE CURTAIN ACCESSORIES

Product name

27110

SLIDE SL-31314E • • • •

27116

SLIDE SL-31315E • • • •

27118

Material: stainless steel Stainless steel bearings as wheels Capacity: 250 kg Weight: 0,86 kg

Material: stainless steel Stainless steel bearings as wheels Capacity: 250 kg Weight: 0,40 kg

SLIDE SL-31314B • Weight: 0,70 kg

27100

RAIL SL-3000 SS • Material: stainless steel • Length: 6,0 m • Weight: 2,58 kg

370


SIDE CURTAIN ACCESSORIES №

M-4

Product name DOOR MECHANISM • Weight: 3,86 kg

27120

DOOR MECHANISM SHORT - L/H

27122

DOOR MECHANISM SHORT - R/H

56295

EYELET 16 MM, BRAZEN • • • • • •

27120

27122

Available only by prior arrangement Package size: 1000 pcs. Inner Ø: 16 mm Outer Ø: 30 mm Height: 8,4 mm Weight: 0,02 kg

TENSIONER WITH HANDLE • Weight: 1,6 kg

56313

TENSIONER, R/H

56314

TENSIONER, L/H 56313

56314

371


M-4 №

SIDE CURTAIN ACCESSORIES

Product name PVC STRIP F=1300 • Width: 50 mm • Weight: 0,05 kg/m

65204

PVC STRIP, WHITE

65205

PVC STRIP, GREY

65206

PVC STRIP, BLACK • Available only by prior arrangement

372


N TOOLBOXES ALUMINIUM TOOLBOXES N-1 OTHER TOOLBOXES N-2 SPARE WHEEL TOOLBOXES N-3 STAINLESS STEEL TOOLBOXES N-4 TOOLBOX SUPPORT N-5


N-1 №

ALUMINIUM TOOLBOXES

Product name

TMT-ALUBOX • • • • • • • •

Housing made out of marine grade aluminium, frame out of anodized aluminium Box cover made out of stainless steel, supported with gas springs Effective ventilation due to new air valve Composite hinges and lockable composite lock Lock can be tightened when closed, also option for padlock Grille mat on the bottom of the box Alubox 1000 and 1200 are equipped with two locks When installed according to instructions, meets the requirements of regulation E73

№ 17800 252516 17800 306060S 17800 505050 17800 603537 17800 605050 17800 605050S 17800 606060 17800 705050 17800 705050S 17800 805050 17800 805050S 17800 806060 17800 1005050 17800 1005050S 17800 1006060 17800 1205050 17800 1206060

Product name Valve box 250x250x160 Alubox 300x600x600 Side opening Alubox 500x500x500 Alubox 600x350x370 Alubox 600x500x500 Alubox 600x500x500 Side opening Alubox 600x600x600 Alubox 700x500x500 Alubox 700x500x500 Side opening Alubox 800x500x500 Alubox 800x500x500 Side opening Alubox 800x600x600 Alubox 1000x500x500 Alubox 1000x500x500 Side opening Alubox 1000x600x600 Alubox 1200x500x500 Alubox 1200x600x600

374

Width 250 300 500 600 600 600 600 700 700 800 800 800 1000 1000 1000 1200 1200

Height 250 600 500 350 500 500 600 500 500 500 500 600 500 500 600 500 600

Depth 160 600 500 370 500 500 600 500 500 500 500 600 500 500 600 500 600

Weight (kg) 2,0 12,9 12,9 11,2 13,5 13,5 12,0 16,5 16,5 18,5 18,5 19,0 22,6 22,6 23,2 26,5 29,0


ALUMINIUM TOOLBOXES №

N-1

Product name TMT TOOLBOX SHELVES • See compatibility from the images below • Material: aluminium

17800-8 400X500 TMT TOOLBOX SHELF 400X500 • Weight: 2,0 kg

17800-8 500X500 TMT TOOLBOX SHELF 500X500 • Weight: 2,3 kg

17800-8 600X500 TMT TOOLBOX SHELF 600X500 • Weight: 2,6 kg

17800-8 700X500 TMT TOOLBOX SHELF 700X500 • Weight: 2,9 kg

17800-8 800X500 TMT TOOLBOX SHELF 800X500 • Weight: 3,2 kg

17800-8-VS 250X500

TMT TOOLBOX INTERMEDIATE WALL 250X500 • Weight: 1,8 kg

500, 600, 700, 800 WIDE TOOLBOXES

17800-8 17800-8 17800-8 17800-8

1000, 1200 WIDE TOOLBOXES

500x500 600x500 700x500 800x500

17800-8 17800-8 17800-8 17800-8

500x500 600x500 700x500 800x500

17800-8 400x500 17800-8 500x500 17800-8 600x500

17800-8-VS 250x500

375


N-1 №

ALUMINIUM TOOLBOXES

Product name COLLAR FOR TOOLBOX • • • • •

1792511 1793011

Material: aluminium Two-piece Bolt fastening to top of the toolbox Height: 110 mm Weight: 2,1 kg

COLLAR 800 X 500 X 110 MM • Suitable for products 17800 805050 and 17800 805050S

COLLAR 1000 X 500 X 110 MM • Suitable for products 17800 1005050 and 17800 1005050S

1793211

COLLAR 1200 X 600 X 110 MM • Suitable for products 17800 1205050 and 17800 1206060

17887

TMT BOARD BOX 600 X 400 X 2400 • Weight: 55,0 kg

Stepless adjustment

376


ALUMINIUM TOOLBOXES №

Product name

17002

ALUBOX DOOR BELT • Multiple length options for different toolbox sizes • Weight: 0,1 kg

17004

ALUBOX DOOR BELT KEEPER • Delivered in pairs • Weight: 0,08 kg

17003

ALUBOX RADIANT HEATER 90W • • • • • • • • •

17060

Powerful tool for moisture removal in combination with good ventilation Low surface temperature Over temperature protection Freely placeable Power: 24 V/90 W Width: 300 mm Height: 150 mm Depth: 20 mm Weight: 0,76 kg

ALUBOX VENTILATOR • Screws are not included in the delivery • Weight: 0,02 kg

17061

VENTILATOR FOR TOOLBOX • Weight: 0,02 kg

377

N-1


N-2 №

OTHER TOOLBOXES

Product name PARLOK TOOLBOXES • • • • • • • •

Made from recycled polyethylene plastic (HDPE and LDPE) Contemporary design, lightweight structure Easy to install Good resistance to impact, chemicals and temperatures Stainless steel structure - does not require painting Brackets included Approved as side guard: E1 73R Presented dimensions are outer dimensions (mm)

SL2-MODEL

SL4-MODEL

Model

B

H

T

Parlok code

Weight (kg)

550 SL2

550

450

450

side brackets

50

5042500

6,5

11503 550 SL4

550

450

450

535

250

50

5044500

6,5

11505 600 SL2

600

450

450

side brackets

50

5042600

7,5

11506

600 SL4

600

450

450

590

265

50

5044600

7,5

11513

700 SL4

700

450

450

685

265

100

5044701

8,5

11514

700L SL4

700

300

300

630

150

30

5044700

5,0

11520

800T SL4

840

480

550

820

320

100

5044800T

13,0

11525

800 SL2

840

480

485

side brackets

100

5042800

18,0

11526

800 SL4

840

480

485

820

290

100

5044800

13,0

11527

1000 SL4

1000

500

460

970

290

100

5044100

16,0

11529

1000 SL2

1000

500

460

side brackets

100

5042100

21,0

11501

mh 1

mh 2

378

Max load (kg)


OTHER TOOLBOXES №

Product name

11510

TOOLBOX 700 MARK 1 • Volume: 70 l • Weight: 9,5 kg

11511

BRACKETS FOR TOOLBOX 700 MARK 1 • Delivered in pairs • Weight: 7,0 kg

11550

LOCK FOR PARLOK TOOLBOX • Parlok code: 5942559 • Weight: 1,0 kg

11552

T-GRIP FOR PARLOK SL-TOOLBOX • Weight: 1,0 kg

379

N-2


N-2

OTHER TOOLBOXES

Product name

11602

EXTINGUISHER CASE, TPE • • • • • • •

11612

3 hinges, 2 quick couplings, belts for fire extinguishers Optional openability to the left or to the right Material: TPE, polycarbonate window Frost resistance: -20 °C Waterproof Parlok code: 5042036 Weight: 2,10 kg

EXTINGUISHER CASE TPE 9 • • • • • • • •

Suitable for 9 kg extinguisher Material: TPE Bands for extinguisher included Can be mounted directly on the surface Size: 320 x 780 x 240 Volume: 65 l Parlok code: 5042039 Weight: 4,15 kg

380


SPARE WHEELS TOOLBOXES №

Product name

17890

SPARE WHEEL BOX 1270 X 430 X 2450 • • • • • • • • • •

16730

Box housing made out of marine grade aluminium plate Polished stainless steel cover Sustainable composite casting locks Fasteners 17095 and 16730 are included in the delivery (4 + 4) Length: 2450 mm Width: 1270 mm Height: 430 mm Cover width: 1385 mm Cover height: 544 mm Weight: 135 kg

UPPER CLAMP • • • • •

Flexible attachment to the box Mounts directly to the frame Finishing: hot-dip galvanized Weight: 0,9 kg NOTE! Fasteners must be reserved 4 pcs. per box

LOWER CLAMP • Includes all necessary mounting hardware • Finishing: hot-dip galvanized • NOTE! Fasteners must be reserved 4 pcs. per box

17095

LOWER CLAMP 430 MM • Weight: 3,9 kg

17096

LOWER CLAMP 530 MM • Weight: 4,5 kg

381

N-3


N-4 №

STAINLESS STEEL TOOLBOXES

Product name

STAINLESS STEEL BOX • • • • • • • • • •

Housing and box cover made out of stainless steel Box cover supported with gas springs Frame made out of anodized aluminium Marine grade aluminium back plate Effective ventilation due to new air valve Composite hinges and lockable composite lock Lock can be tightened when closed, also option for padlock Grille mat on the bottom of the box Sizes 1000 and 1200 are equipped with two locks When installed according to instructions, meets the requirements of regulation E73

№ 17810 403025 17810 605050 17810 605050S 17810 805050 17810 805050S 17810 1005050 17810 1005050S 17810 1205050 17810 1206060

Product name Stainless steel box 400x300x250 Stainless steel box 600x500x500 Stainless steel box 600x500x500 Side opening Stainless steel box 800x500x500 Stainless steel box 800x500x500 Side opening Stainless steel box 1000x500x500 Stainless steel box 1000x500x500 Side opening Stainless steel box 1200x500x500 Stainless steel box 1200x500x500

382

Width 400 600 600 800 800 1000 1000 1200 1200

Height 300 500 500 500 500 500 500 500 500

Depth 250 500 500 500 500 500 500 500 500

Weight (kg) 20,9 20,9 20,9 23,9 23,9 28,6 28,6 33,0 33,0


STAINLESS STEEL TOOLBOXES №

Product name

17919

TMT-TRIANGLEBOX • • • • • •

17061

Cover and frame made out of stainless steel 2 pcs. SS adjustable fasteners Width: 200/500 mm Height: 300 mm Depth: 500 mm Weight: 13,2 kg

VENTILATOR FOR TOOLBOX • Weight: 0,02 kg

COLLAR FOR TOOLBOX • • • • •

1792511 1793011 1793211

Material: aluminium Two-piece Bolt fastening to top of the toolbox Height: 110 mm Weight: 2,1 kg

COLLAR 800 X 500 X 110 MM • Suitable for products 17810 805050 and 17810 805050S

COLLAR 1000 X 500 X 110 MM • Suitable for products 17810 1005050 and 17810 1005050S

COLLAR 1200 X 500 X 110 MM • Suitable for products 17810 1205050 and 17810 1206060

383

N-4


N-4

STAINLESS STEEL TOOLBOXES

Product name TMT TOOLBOX SHELVES • See compatibility from the images below • Material: aluminium

17800-8 400X500 TMT TOOLBOX SHELF 400X500 • Weight: 2,0 kg

17800-8 500X500 TMT TOOLBOX SHELF 500X500 • Weight: 2,3 kg

17800-8 600X500 TMT TOOLBOX SHELF 600X500 • Weight: 2,6 kg

17800-8 700X500 TMT TOOLBOX SHELF 700X500 • Weight: 2,9 kg

17800-8 800X500 TMT TOOLBOX SHELF 800X500 • Weight: 3,2 kg

17800-8-VS 250X500

TMT TOOLBOX INTERMEDIATE WALL 250X500 • Weight: 1,8 kg

600, 800 WIDE TOOLBOXES

1000, 1200 WIDE TOOLBOXES

17800-8 17800-8 17800-8 17800-8

17800-8 600x500 17800-8 800x500

500x500 600x500 700x500 800x500

17800-8 400x500 17800-8 500x500 17800-8 600x500

17800-8-VS 250x500

384


TOOLBOX SUPPORT №

Product name

17043

L-SUPPORT SET 700 X 680 • • • •

Support for aluminium toolboxes Material: hot-dip galvanized steel Delivered in pairs Weight: 4,0 kg

BRACKET FOR STAINLESS STEEL BOXES • Material: stainless steel • Weight: 3,0 kg

17044-1 BRACKET, RIGHT

17044-1

17044-2 BRACKET, LEFT

385

N-5


N-5 №

TOOLBOX SUPPORT

Product name

17046-5 L-SUPPORT 720 X 680 • • • •

Console for larger and heavier toolboxes Can be used alone or multiple parallelly Material: hot-dip galvanized steel Weight: 11,7 kg

• Also lower and upper supports available 17046-3 and 17046-7.

17046-3

17046-3 LOWER SUPPORT FOR L-SUPPORT • Weight: 0,7 kg

17046-5

17046-7 UPPER SUPPORT FOR L-SUPPORT • Weight: 0,7 kg

386

17046-7


TOOLBOX SUPPORT №

Product name

170465M

L-SUPPORT 720 X 680, UNTREATED • • • •

Support for larger and heavier toolboxes Can be used alone or multiple parallelly Material: untreated steel Weight: 10,3 kg

387

N-5


N-5

TOOLBOX SUPPORT

Product name

17047

TOOLBOX BRACKET, PAIR • • • •

Delivery includes two brackets Mounting supplies are not included in the delivery Material: hot-dip galvanized steel Weight: 5,0 kg

388


O UNDERRUN PROTECTION REAR UNDERRUN PROTECTION O-1 SIDE PROTECTION O-2 UNDERRUN PROTECTION FASTENERS O-3


O-1 №

REAR UNDERRUN PROTECTION

Product name UNDERRUN GUARD INTEGRAL TMT • • • •

37212

UNDERRUN GUARD INTEGRAL TMT-2400 • • • •

37214

Approval number E4-58R-020343 Mounting rail for mudflap integrated in the profile Material: anodized aluminium Includes 2 pcs. M16 mounting pieces (37212-2) and end plugs (37212-1)

Width: 100 mm Height: 129 mm Length: 2400 mm Weight: 17,0 kg

UNDERRUN GUARD INTEGRAL TMT-2550 • • • •

Width: 100 mm Height: 129 mm Length: 2550 mm Weight: 18,1 kg

37212-1 END PLUG FOR UNDERRUN GUARD INTEGRAL • • • •

Material: plastic Delivered in pairs Includes mounting screws Weight: 0,2 kg

37212-2 MOUNTING PIECE M16 • Suitable for products 37212, 37214 and 37215 • Weight: 0,2 kg

UNDERRUN GUARD GP-2400 • • • • • • • •

Approval number e4-70/221-2006/20-0914-00 Material: anodized aluminium Width: 100 mm Height: 130 mm Length: 2400 mm Weight: 17,1 kg Includes M16 counterparts and end plugs with screws NOTE! Integrated mounting rail is not suitable for standard mudflaps

37215-1 END PLUG FÖR UNDERRUN GUARD GP • Material: anodized aluminium • Weight: 0,2 kg

390


SIDE GUARD ACCESSORIES №

Product name

SIDE GUARD LEG • Approval E4-73R-010054

SIDE GUARD LEG 738 • Pipe length: 700 mm

17510

SIDE GUARD LEG 738 • Material: galvanized steel • Locking pin with cotter • Weight: 3,4 kg

17512

SIDE GUARD LEG 738 SS • Material: stainless steel • Locking pin with band • Weight: 2,3 kg

17520

SIDE GUARD LEG 365 • • • • • • •

Suitable for side protection profile fastening Fastening with M8 bolts Easy to handle - no tools required Locking pin with band and chain Material: galvanized steel Pipe length: 365 mm Weight: 1,9 kg

17512-8 LOCKING PIN WITH BAND • Suitable for side guard legs 17512 and 17520 • Weight: 0,1 kg

391

O-2


O-2

SIDE GUARD ACCESSORIES

Product name

17500

SIDE PROTECTION BRACKET, SLIDING • • • •

17522

Simple structure and easy to handle without tools Material: galvanized steel Adjustable length: 763 / 713 / 663 / 613 / 563 mm Weight: 3,83 kg

SIDE PROTECTION BRACKET, FIXED • • • •

Suitable for side protection profile fastening Fastening with M10 bolts Material: galvanized steel Weight: 1,76 kg

Note! Approval E4-73R-010054 applies to all products in this double page spread.

392


SIDE GUARD ACCESSORIES №

O-2

Product name SIDE PROTECTOR BRACKET • Material: hot-dip galvanized steel Suitable mounting brackets for fastening (Accessories for stays E-5): • 15018 • 15019

17525

15018

15019

SIDE PROTECTOR BRACKET 90° • Weight: 3,5 kg

17526

SIDE PROTECTOR BRACKET 60° • Weight: 3,6 kg

17525 17529

SIDE GUARD CLAMP • Material: hot-dip galvanized steel • Includes M10 bolts and nuts • Weight: 0,2 kg

17527

BRACKET FOR SUPPORT • • • • • •

Suitable for reinforcing the side protector tube bracket Material: hot-dip galvanized steel For Ø 42 mm pipe bracket Inludes M10 boltand nut Includes bracket pair Weight: 0,42 kg

393

17526


O-2 №

SIDE GUARD ACCESSORIES

Product name END PLUG FOR 37222 • • • •

Material: plastic Color: grey Weight: 0,02 kg Suitable for profile 37222

37224 37224

END PLUG

37224-1 ENG PLUG

37224-1

END PLUG FOR 37226 • • • •

Material: plastic Color: black Weight: 0,03 kg Suitable for profiles 37226 and 37227

37226-2 37226-2 END PLUG L/H 37226-3 END PLUG R/H

37229-1 END PLUG FOR 37229 • • • •

Material: plastic Color: grey Weight: 0,03 kg Suitable for profile 37229

394

37226-3


SIDE GUARD PROFILES №

Product name

37222

SIDE PROTECTOR 30 X 100 • • • • • • •

Approval E4-73R-010054 Material: anodized aluminium Length: 4,0 / 6,0 / 7,1 m Weight: 1,2 kg/m Packaging 20 pcs. Fastening with M10 bolts Suitable end plug 37224 (in Side guard accessories)

37224

END PROFILE FOR SIDE PROTECTOR 7264 AN • • • •

Approval E4-73R-010054 For N3, N4 - O3, O4 category vehicles Material: anodized aluminium Weight: 1,7 kg/m

37226-2 37226-3

Suitable end plugs (in Side guard accessories): • 37226-2 • 37226-3

37226

END PROFILE 7264 AN • Length: 4,1 / 7,1 m • Weight: 1,7 kg/m

37227

END PROFILE 7264 AN 500 MM • Length: 500 mm • Weight: 0,85 kg/pc.

END PROFILE FOR SIDE GUARD PROTECTOR 11876 AN • Approval E4-73R-010054 • Material: anodized aluminium • Suitable end plug 37229-1 (in Side guard accessories)

37229

37229-1

END PROFILE 11876 AN • Length: 4,1 / 7,1 m • Weight: 1,7 kg/m

37229500

END PROFILE 11876 AN 500 MM • Length: 500 mm • Weight: 0,85 kg/pc.

395

O-2


O-3 №

UNDERRUN PROTECTION FASTENERS

Product name END PLATE R+L • • • •

17600

Approval number E4-58R-020343 Material: 10 mm steel plate Surface treatment: painted RAL 7024 Delivered in pairs

END PLATE 155 X 500 • Size: 155 x 500 mm • Weight: 20,5 kg/pc.

17602

END PLATE 200 X 600 • Size: 200 x 600 mm • Weight: 26,7 kg/pc.

396

TMT Product Catalogue  
TMT Product Catalogue  
Advertisement