Issuu on Google+

2008-09 PERFORMANCE AND OFF ROAD PARTS AND ACCESSORIES


Welcome Truck Enthusiasts... The truck and SUV market is in a constant state of change. While conventional pickup trucks and sport utilities still maintain their popularity, a whole new breed of smaller utility vehicles called "crossovers" has made definite inroads to the market. We've also noted a resurgence of the interest in off-roading, especially in the so-called "hard core" areas. For these reasons, we have somewhat revamped our traditional truck and SUV catalog format to include many parts geared to the specialized needs of the serious off-roaders. To further steady growth in all of these disciplines, the market and its principal manufacturers must possess a great deal of resiliency. Remaining flexible and reacting in a timely manner are the keys to surviving. Keeping this spirit of flexibility in mind, we have created our latest catalog with an eye toward making sure that everyone stays updated on all of the latest product availability and information. This is our eighth Truck Parts and Accessories Catalog and, as in the past, it is dedicated to helping owners individualize their new trucks and sport utilities as well as improving and refurbishing the older ones. If you want a comprehensive truck, SUV and off road accessory catalog, look no further.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

1


manufacturers index

PERFORMANCE

PERFORMANCE

PERFORMANCE

TIRE AND WHEEL

A A-1 Products ...................................... 60 Accel Ignition .................................... 60 Advance Adapters ........................... 62 Advanced Engine Design ............. 63 AEM Brute Force............................... 64 Aero Race Wheels ...................72, 289 Aeromotive ........................................ 62 Aeroquip .......................................65-73 AFCO Racing Products .............74-75 AGR Steering ...............................76-77 Allstar Performance .................... 3-59 Airaid ..............................................80-83 Air Lift ............................................78-79 Air Ride Technologies..................... 84 American Autowire ......................... 85 AP Racing ........................................... 86 ARP .................................................87-88 ATL Fuel Cells .................................... 60 Alinabal ............................................... 79 Alumi-Lite ........................................... 96 Aurburn Gear ..............................89-90 Aurora ............................................90-91 Auto Meter ...................................92-97 Autolite................................................ 79 Auto-Rod Controls (ARC) .............. 84 B B&M ................................................98-99 Baer Brake Systems .......................100 Battery Tender ................................103 BD Diesel Performance.......101-102 Belltech .............................................103 Be Cool ..............................................110 Bilstein ......................................104-105 Borgeson ..........................................106 Borla ...................................................107 Bullydog...................................108-109 C Canton ......................................111-115 Centerforce ......................................108 Champion.........................................117 CNC ............................................116-117 Coleman............................................118 D Dan Press Industries (DPI) ..........118 Demon Carburetors ......................119 Denso.................................................119 Derale .......................................119-120 Design Engineering Inc ...............122 Detroit Locker ........................123-124 Diablo Sport ...........................125-126 Dynamat ...........................................127 Dynatech .................................128-129 Dynomax .................................130-134 E Earl’s...........................................135-139 Eaton ..................................................140 Edelbrock.................................140-143 Edge Products........................144-146 Eibach Springs .......................147-148 Energy Release ...............................245 Energy Suspension ..............149-160 F Fabtech.....................................161-162 Firebottle ..........................................163 Flaming River ..................................178 Flex-A-Lite ...............................164-166 Flowmaster .............................167-174 Fluidyne ............................................163 Fram ...................................................175 Fuel Safe Racing Cells..........176-178 G GM..............................................179-181 Gibson ......................................182-183 Granatelli Motor Sports ...............183 Grant .........................................184-185 Griffin .................................................181

H Hawk Performance ..............186-187 Hedman Hedders .................188-190 Hellwig Products, Inc ...................191 Hi-Lift Jacks ......................................192 Hitachi ...............................................196 Holley ........................................193-194 Howe .........................................195-196 Hurst..........................................197-198 Hypercoils ........................................201 Hypertech ...............................199-200 I Ideal Heated Knives ......................201 Intercomp................................202-203 Insulator ............................................203 J Jaz ..............................................204-205 Joes Racing Products ...................206 Jones Racing Products.................207 Joe Gibbs Driven Racing Oil ......208 Jet Performance Products ..........208 K K&N Filters ...............................209-215 Kluhsman Racing Components ......217 Koolmat.............................................215 KRC Power Steering ......................216 KYB ......................................................217 L Lakewood .........................................218 Longacre ..................................219-224 LizardSkin .........................................224 Lucas Oil Products, Inc ........225-226 M MagnaFlow Performance ....234-237 MagnaFuel .......................................238 Mallory .....................................239-240 March Performance ......................241 MasterCraft .............................242-243 Milodon....................................243-245 Moroso .....................................246-258 Mr. Gasket................................259-261 Motive Gear .....................................261 Motive Products .............................265 MSD Ignition ..........................226-233 N Nine-Plus ..........................................262 Nitrous Express (NX) .....................263 NGK Spark Plugs ............................263 O Optima Batteries ............................264 Outerwears ......................................264 Outlaw Racing Brakes ..................263 Out-Pace Racing Products..........265 Oval Craft..........................................264 P Painless Performance ..........266-269 Performance Accessories.....270-271 Performance Friction Brakes .....272 Perma-Cool .............................273-275 Pertronix ...........................................276 Peterson ...................................277-281 Pioneer ..............................................281 PJ1 .......................................................281 Poweraid ...........................................282 Powermaster ...................................283 Powertank ...............................284-285 Powertrax .........................................265 Power Slot ...............................286-287 Power Transfer Parts .....................289 Pressure, Inc. ....................................265 Pro Blend ..........................................292 Professional Products...................288 Pro-Form ..................................289-290 Pro-Wenks ........................................291 Prothane ..................................292-292 Q QA1 ............................................293-295

Q Quarter Master ...............................296 Quickcar Racing Products ....297-299 R Racing Optics ..................................296 Rancho Suspensions ...........300-301 Ratech ................................................302 Race Bolt ...........................................302 ReadyLift ..................................303-304 Rebco .................................................305 Redline .....................................306-307 Richmond Gear .....................308-309 Rock Batteries .................................299 Royal Purple.....................................310 Russell ................................................311 S S And B Filters ........................312-313 Safecraft ............................................314 Sanderson Headers.......................311 Scribner Plastic ...............................314 SCP ......................................................327 Seals-it ...............................................315 Skyjacker..................................316-319 Spal .....................................................321 Stage 8...............................................334 Stainless Steel Brake Capilers ........................321-324 Stewart Components ...................325 Stewart Warner...............................326 Superchips ..............................328-329 Supertrapp.......................................330 Superior ............................................331 Superwinch ............................332-333 Suspension Springs ......................334 Sweet ........................................335-336 T Tanner ................................................336 Taylor.........................................337-338 TCI .......................................................339 TeamTech..........................................344 ThermoTec ..............................344-345 Titon ...................................................346 Tilton Brake & Control .........347-348 Torco...................................................349 TransDapt ................................340-343 Trailmaster .......................................346 Tru-Cool ............................................351 Tuflex Strap ......................................346 Turbonetics ......................................350 Turbo Start .......................................351 U Ultra-Shield ......................................351 UB Machine ............................352-353 US Brake ............................................354 V Valco ...................................................355 Valvoline ...........................................356 VDO ....................................................357 VHT Chemicals................................358 W Warn ..........................................359-367 Wehrs Machine...............................368 Weiand ..............................................369 Wilwood Engineering .........370-376 X XRP.............................................377-381

A American Racing............................382 B Bassett ...............................................382 D Dick Cepek ..............................383-385 M Mickey Thompson ................385-389 S Super Swamper ..............................390

2

SAFETY B Bell Helmets............................391-392 G G-Force .....................................393-396 I Impact Racing ........................397-398 M Mechanix Wear ...............................399 P Paulson ..............................................394 R Ringers Gloves ................................400 R.J.S. ...........................................401-403 S Simpson ...................................404-409 Sparco ................................................410 ACCESSORIES A AutoLoc .............................................411 Auto Ventshade.....................450-453 B Bestop................................................412 Billet Specialties ....................413-416 Bushwacker ............................417-418 C California Car Duster ....................419 Covercraft ................................419-420 Cyclo...................................................420 D DeeZee .....................................421-423 G Gorilla .......................................424-425 G-Tech ................................................425 H Husky Liners ...........................426-429 HP Books...........................................430 I Innovate Motorsports ..................430 K KC Lites .....................................431-432 L Lokar .........................................433-434 LSD......................................................434 Lund ..........................................435-437 M McGard ..............................................437 N Nasta ..................................................439 Nify Products Inc............................438 Norstar ...............................................438 P PIAA ...........................................439-440 Putco .........................................441-443 R Reese .........................................445-446 S SA Design .........................................446 Shurtrax ............................................449 T Truxedo ....................................447-449 W Westin .......................................450-457 * ITEMS IN RED DENOTE NEW VENDOR

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Hand Rivet Gun

Pin Type Cleco Fasteners

ALL18206

Cleco pins permit quick, easy installation and removal of sheet metal during fitting. Pins will work with thicknesses up to 1/4".

Includes interchangeable nosepieces for 3/32", 1/8", 5/32", and 3/16" dia. rivets.

New Design!

Deluxe Hand Rivet Gun ALL18208 Deluxe rivet tool includes nosepieces for 3/32", 1/8", 5/32", and 3/16" rivets. Wrench stores inside handle for quick nosepiece changes.

Part No.

Description

ALL18222..............1/8" Diameter Pins, 10-Pack ALL18223..............1/8" Diameter Pins, 25-Pack ALL18224..............1/8" Diameter Pins, 100-Pack ALL18226..............3/16" Diameter Pins, 10-Pack ALL18227..............3/16" Diameter Pins, 25-Pack ALL18228..............3/16" Diameter Pins, 100-Pack

Clamp Type Cleco Fasteners ALL18230

Air Rivet Gun ALL18207 Heavy duty, for use with steel or aluminum rivets from 3/32" to 3/16".

New Design!

Rivet Gun For Cordless Drill ALL18205 An adapter for cordless drills, the Rivet Gun speeds up installation of “blind� rivets. A real hand and time saver. Includes nosepieces for 3/32", 1/8", 5/32 and 3/16" rivets.

3/16" Double Ended Drill Bits

Use when drilling is not an option. Smooth throat prevents paint damage, and spring exerts strong clamping pressure. Throat depth is 1" with a maximum clamping range of 1/2".

Cleco Pliers ALL18220 Unique tool readily installs and removes Cleco fasteners.

Quick Turn Fastener Wrench ALL19400 The quick turn fastener wrench fits slot head fasteners and reduces the risk of body or fastener damage from using screwdrivers for loosening or tightening. Non-slip hand grip.

ALL18204 A must for every toolbox. Package of 6.

Safety Wire Twister Pliers ALL10120 Never lose another bolt. Rugged pliers have an end bearing for smoother, faster twisting, especially in tight areas where a second pull is needed.

Safety Wire ALL10121 Stainless steel wire is .032" dia., 1 lb. spool.

Braided Hose Cutter ALL11000

Paul Holman

Photo By Jim Walbolt PhotoSports

Tired of the jagged edges left after cutting braided line with a hacksaw? Heavy-duty hose cutter makes clean, snag-free cuts every time.

Replacement Blades ALL11002

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

3

performance

TOOLS & ACCESSORIES


performance

TOOLS & ACCESSORIES Racer’s Tape

Tie Wraps

A hundred uses in the shop or in the "field". True “Racer’s Tape”.

Secure electrical wiring, gauge lines and roll bar padding. 100 per bag. Available in black, natural, red, blue, yellow and purple nylon.

Part No.

Description

ALL14140..............1" Silver x 90 Ft. ALL14141..............1" Black x 90 Ft. ALL14142..............3" White x 180 Ft. ALL14143..............3" Black x 180 Ft. ALL14150..............2" Silver x 180 Ft. ALL14151..............2" White x 180 Ft. ALL14152..............2" Red x 180 Ft. ALL14153..............2" Black x 180 Ft.

Part No.

Description

ALL14154 ...... 2" Yellow x 180 Ft. ALL14155 ...... 2" Blue x 180 Ft. ALL14156 ...... 2" Orange x 180 Ft. ALL14157 ...... 2" Green x 180 Ft. ALL14158 ...... 2" Burgundy x 180 Ft. ALL14159 ...... 2" Purple x 180 Ft. ALL14162 ...... 2" Teal x 180 Ft.

Gaffer’s Tape Vinyl coated gaffer’s tape has a dull appearance and is much stronger than standard racer tape. Part No.

Description

Part No.

Description

2" Wide x 180'

2" Wide x 45'

ALL14251..............White ALL14252..............Red ALL14253..............Black ALL14254..............Yellow ALL14255..............Navy Blue

ALL14145 ...... Fluorescent Green ALL14146 ...... Fluorescent Pink ALL14147 ...... Fluorescent Orange ALL14148 ...... Fluorescent Yellow

4" Wide x 180'

ALL14261..............White ALL14263..............Black

Non-Skid Tape ALL14165 Heavy duty, non-skid tape is long lasting and may be used anywhere. Tape will handle temperatures up to 220°F, 4" x 10' roll.

Black And White Checkered Tape ALL14149 Checkered tape has many uses such as signs, displays, trailers, etc. Rolls are 2" wide and 45' long.

Air Box Tape Metallized tape has special adhesives to secure and seal panels. Designed specifically for sealing air boxes and other high heat areas. Part No.

Part No.

Length

Part No.

Length

Black Nylon

Red Nylon

ALL14120...................3-3/4" ALL14122...................6" ALL14123...........7-1/4 " ALL14124...................11-1/4" ALL14125...................14-1/4"

ALL14126 .....................7-1/4" ALL14127 .....................14-1/4" Blue Nylon ALL14128 .....................7-1/4" ALL14129 .....................14-1/4"

Natural Nylon ..

Yellow Nylon

ALL14130...................3-3/4" ALL14132...................6" ALL14133...........7-1/4" ALL14134...................11-1/4" ALL14135...................14-1/4"

ALL14136 .....................7-1/4" ALL14137 .....................14-1/4" Purple Nylon ALL14138 .....................7-1/4" ALL14139 .....................14-1/4"

Fire Extinguishers Hand-held, dry chemical fire extinguishers include steel mounting bracket and strap, aluminum nozzle and hairpin safety pin. Rated ABC by Amerex, effective against electrical, liquid, grease, wood or paper fires. ALL10502 includes a hook to hang extinguisher on shop or trailer wall. Part No.

Description

ALL10500

ALL10501

ALL10502

ALL10500..............2-1/2 Lb., Red ALL10501..............2-1/2 Lb., Chrome ALL10502..............5 Lb., Red

Quick Release Fire Extinguisher Bracket ALL10510 Keeps extinguisher secure and allows quick access by pulling pin. Mounts most 2-1/2 lb. extinguishers to flat panel or tubing with supplied clamps. Extinguisher not included.

Description

ALL14270..............Silver 2" ALL14272..............Black 2"

Surface Guard Tape Clear protective polyurethane tape can be applied directly over painted surfaces or decals to help prevent scratching, chipping or other damage. Use on wheel well openings, rocker panels, headlight decals, door edges or anywhere added protection may be required. Tape is 8 mil thick and provides excellent resistance to ultra violet light. Will not yellow over time. Part No.

Description

ALL14275..............2" x 30' ALL14276..............3" x 30' ALL14277..............4" x 30' Ross Hoek

4

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Tie Downs, Straps And D-Rings Part No.

Deluxe Aluminum Mud Scraper ALL44165

Description

ALL10184..............2" x 8', 10,000 Lb. Tie Down (Flat Hook) ALL10188..............2" x 8', 10,000 Lb. Tie Down (Direct Hook) ALL10192..............2" x 8', 10,000 Lb. Tie Down (Twist Hook) ALL10196..............2" x 8', 10,000 Lb. Tie Down With Built-in Axle Strap (Twist Hook) ALL10200..............2" Wide Axle Tie Back Strap, 48" C/L To C/L Of Hooks, Adj. 24"-40" ALL10204..............21" Long Axle Strap ALL10208..............33" Long Axle Strap ALL10210..............Heavy Duty Recessed D-Ring

Remove the stickiest mud and clay without damaging paint or decals. Lightweight and 32" long to reach wings, deck lids and undercarriage. Use the convenient hole in end to hang scraper.

Mud Scraper Kits ALL10184

ALL10188

ALL10192

Beveled edges scrape even the stickiest mud and clay off without damaging expensive paint or lettering. Notched end of scraper will clean nerf bars and roll cages, and the flat end will clean body panels. Four-piece kits include a plastic extension handle for hard-to-reach areas. Part No.

ALL10196

Description

ALL44160..............Black ALL44161..............Red ALL44162..............Blue

ALL10200

ALL10204

ALL10208 Direct Hook Flat Hook

Twist Hook

Towels Soft, absorbent terry cloth towels can be used for polishing, wiping up spills or general detailing. Shop towels belong with every tool box as well as in the shop, garage or trailer. Part No.

ALL10210

Description

ALL12010..............Red Shop Towels, 25-Pack ALL12012..............White Terry Towels, 12-Pack

Vehicle Tie Down Package ALL10209 Axle Combo Ratchet Straps

Racing Goggles Axle Tie Back Straps

Includes two ALL10196 axle combo ratchet straps and two ALL10200 axle tie back straps. Enough tie downs to secure a vehicle to any trailer.

Ratchet Binder ALL10180 Secure extra equipment in the trailer with this 1" wide, 8 ft. long binder made of heavy duty nylon webbing. Easy, one-hand operation. Rated at 1200 lbs.

Retractable Tow Strap ALL10198 Easily secured to tow vehicle and vehicle to be towed. Automatically extends and retracts to prevent running over strap. Strap is 13 ft. long with a 4000 lb. towing capacity. Recoils when not in use for easy storage.

Durable goggles provide superior visibility and eye protection. Perfect for the spectator.. or the passenger in an open vehicle. Goggles are ventilated, with clear, smoke or amber lenses. Part No.

Description

ALL10261..............Smoke ALL10262..............Amber

Reusable Corded Earplugs ALL12000 Corded earplugs fit instantly without rolling squeezing. Made of a soft material that cleans up warm, soapy water.

or easily in

Stopwatch ALL10114 Accurate, durable and compact.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

5

performance

TOOLS & ACCESSORIES


performance

TOOLS & ACCESSORIES Hydraulic Space Saver Shop Hoist ALL10179

Shipped Via Truck Freight

ALL10173

When not in use, hoist may be folded up to save shop space. Folded dimensions are 30" x 34" x 60" high. Boom extends to three positions.

Universal cradle may be used on inline 4, 6, and 8 cylinder engines as well as older V8’s. Adjustable 9" risers are positioned under oil pan rails, then 8' x 1" ratcheting strap is used to secure the engine to the cradle. Remove the risers and the cradle may be used for transmissions, wheels, tires, etc. Heavy duty, 3" swiveling casters move easily over garage and shop floors.

Specifications:

Rear Base Width ........... 30" Front Base Width ......... 34" Base Length................... 68" Boom Position

1

2

Universal Engine Cradle

3

Capacity (Lbs.) ...........4000 ... 2000 ... 1000 Chain Distance From Floor

Maximum ....................86.5" .......90" .......98" Minimum .....................11.5" ......... 5" ......... 1" Boom Reach .................. 31" .......38" .......45"

Economy Engine Cradle ALL10171

Folded

Replacement Parts Part No.

Description

ALL10177

ALL10177..............8 Ton Ram For Shop Hoist

Engine Lift Plate ALL10123 Ease engine swaps with the Allstar Engine Lift Plate. Bolts to manifold in place of carburetor. Gold anodized plate fits standard Holley 4150/4160 and 4500 Dominator, Rochester Quadrajet, Carter, Motorcraft, Edelbrock, Edelbrock Q-Jet and Carter AFB carburetors.

Chevy LS Series Engine Lift Plate ALL10140

Engine cradles are available in Standard Duty or Heavy Duty, both with provisions for mounting wheels. Made of 1" square tubing with black powder coating. Stands include Grade 5 fasteners and may be easily disassembled for storage. Standard Duty cradles accept wheel kits with 3/8" studs. Heavy Duty cradles accept wheel kits with 1/2" studs. Wheel kits must be purchased separately. Description

Standard Duty Cradles

ALL10130..............SB and BB Chevy ALL10146..............SB Ford ALL10150..............SB Mopar Heavy Duty Cradles

Ford Engine Lift Plate ALL10125

ALL10132..............SB and BB Chevy ALL10144..............Pontiac V8 ALL10148..............SB Ford ALL10152..............SB Mopar ALL10154..............BB Ford ALL10156..............BB Mopar

Ease engine swaps with the Allstar Engine Lift Plate. Fits standard 5.0L/5.8L EFI intakes: OEM, GT-40, Cobra, Holley, Edelbrock.

Heavy Duty Engine Stands

Accepts Bolt-On Wheel Kits

Cradle Wheel Kits Hard rubber wheel kits may be mounted to Allstar engine cradles ALL10130 thru ALL10156. Kits are also available with locking wheels, ideal for storing spare engines in trailer. Standard duty kits feature 3/8" studs and heavy duty models use 1/2" studs. Four wheels per kit.

ALL10176

Part No.

ALL10162

Description

ALL10162..............Std. Duty 3" Dia. Kit ALL10163..............Std. Duty 3" Dia. With Locking Kit ALL10164..............Heavy Duty 3" Dia. Kit ALL10165..............Heavy Duty 3" Dia. With Locking Kit ALL10166..............Heavy Duty 5" Dia. Kit

ALL10175

Part No.

Max. Capacity.

Length

Width

Height

Weight

ALL10175 ALL10176

1000 1250

32" 32"

30" 30"

30" 32"

52 lbs. 59 lbs.

6

Does Not Accept Bolt-On Wheel Kits

Engine Cradles

Part No.

Designed for use with Chevy LS series engines.

Choice of ALL10175 with an I-shaped base with support through the center, or ALL10176 with a U-shaped base and an open center area. Both stands include heavy duty casters, 360° rotating head assembly and sliding handle.

Small block/big block Chevy cradle is made from 1" square tubing and powder coated black. No provisions for wheels.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Round Tubing Notchers Save time when fabricating roll cages. Notchers render precise joints for more consistent welds and stronger cages. Available in deluxe aluminum or economy steel versions, notchers accept up to 2" diameter stock and automatically align and center tubing. Use in drill press or with hand drill. Notchers adjust up to 45°. Part No.

Round Tubing Bender Bend roll cage and chassis tubing in the home shop. Portable round tubing bender with welded steel frame is equipped with a hand-operated, 8-ton hydraulic jack. Cast aluminum shoes are available with either a 7" radius for 1-1/2", 1-5/8" and 1-3/4" round tubing, or a 5" radius for 1" and 1-1/4" round tubing. Benders are easily converted by changing shoe and roller. Total weight is only 42 lbs. for easy transporting. Bend up to .134" wall thickness mild steel tubing or .120" wall thickness chrome moly tubing.

ALL10410

Part No. ALL10400

Description

ALL10400..............Deluxe Notcher ALL10410..............Economy Notcher

ALL10405

Replacement Parts

Replacement Parts

ALL10402..............5/8"-18 Thread Adapter ALL10403..............Arbor Support Bushings (Pair) ALL10404..............Arbor With 1/2"-20 Thread Optional Parts

ALL10402 ALL10406

ALL10405..............Arbor With 5/8"-18 Thread ALL10406..............Drill Press Mount (ALL10410 Only) ALL10403 ALL10407..............Arbor Support With Needle Bearings Note: Tubing notchers include 1/2"-20 arbor ALL10407 thread and 5/8"-18 adapter. Hole saws up to 1-1/8" diameter use 1/2"-20, larger hole saws use 5/8"-18 thread.

Hole Saw Set ALL10412 Use with tubing notchers. Does not include an arbor for a hand drill. Set includes one of each size: 3/4", 1", 1-1/8", 1-1/4", 1-1/2" 1-5/8" and 1-3/4".

Individual Hole Saws Part No.

Description

ALL10300..............1-3/4" x 7" Radius Bender ALL10310..............1-5/8" x 7" Radius Bender ALL10320..............1-1/2" x 7" Radius Bender ALL10330..............1-1/4" x 5" Radius Bender ALL10340..............1" x 5" Radius Bender

Size

ALL10413..............3/4" ALL10414..............1" ALL10415..............1-1/8" ALL10416..............1-1/4" ALL10417..............1-1/2" ALL10418..............1-5/8" ALL10419..............1-3/4" Note: Hole saws up to 1-1/8" diameter use 1/2"-20 thread, larger hole saws use 5/8"-18 thread.

Telescoping Magnet ALL14173 A strong (3 pound pull), telescoping magnet that will retrieve dropped tools or fasteners. Tool extends over 2 feet, and retracts to just 5" to fit in a shirt pocket.

ALL10305..............1-3/4" x 7" Radius Die Shoe and Roller ALL10315..............1-5/8" x 7" Radius Die Shoe and Roller ALL10325..............1-1/2" x 7" Radius Die Shoe and Roller ALL10335..............1-1/4" x 5" Radius Die Shoe and Roller ALL10345..............1" x 5" Radius Die Shoe and Roller ALL10390..............Jack For Tubing Benders ALL10391..............Jack Handle ALL10392 .............Lower Roller Shaft Notes: Die shoe should be well lubricated, when using tubing .095" and thinner, to prevent kinking. Bender should not be used with tubing beyond a .134" wall thickness.

Smart Tool ALL10113 The SMARTTOOL has dozens of uses around the shop. It can be used to ensure that chassis tubing is level and plumb. Helpful when building roll cages or checking driveshaft angles. A “hold” button allows “freezing” and “unfreezing” readings which can be displayed as degrees or percentages (slope), or in./ft. (pitch) at the push of a button. Plus and minus signs indicate when the pitch is slightly more or less than that shown on the display. Pitch readings are in 1/8 in./ft. increments. A listen and level feature emits an audible “beep” at level and plumb. The tool will shut off automatically if it’s left idle for more than six minutes. Powered by a standard 9 volt battery.

Telescoping Mirror ALL14174 A 1-1/4" multi-positional, telescoping mirror for inspecting hard-to-see areas or locating engine oil leaks. Mirror is 6-1/2" long and extends to over 19".

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

7

performance

TOOLS & ACCESSORIES


performance

TOOLS & ACCESSORIES Digital Calipers 0-6" With Case

Spark Plug Indexing Tool ALL96510

ALL96411

Indexing positions the ground strap of the spark plug for best piston dome clearance and unshrouds the electrode for a more even burn and possible gains of 5-15 horsepower. Works with flat gasket or taper seat 14mm spark plugs. Includes instructions.

Accurate measurements with less chance for error. Measure inside, outside and depth dimensions with easy to read Metric or SAE LCD display, in .001" increments up to 6". On/Off switch conserves battery and zero setting assures accurate readings. Plastic storage case offers protection and additional battery storage.

Dial Caliper ALL96410 Quality hardened stainless steel dial caliper is shockproof and capable of measuring items from .001" to 6" in increments of .001". Includes protective carrying case.

Spark Plug Gap Tool ALL96515 To set consistent plug gap. Insert plug into holder, put feeler gauge between ground strap and electrode, and the gently turn knurled knob until feeler gauge is snug.

Internal Thread Chaser Insert tool past damaged threads, expand, and, using undamaged threads as a guide, twist back out to restore damaged threads. The 14mm tool is perfect for repair of damaged spark plug threads without removing cylinder head. Part No.

Dial Indicator With Magnetic Base ALL96414 Dial indicator with magnetic base has dozens of uses in race car shop. A necessity when degreeing a camshaft, checking crankshaft end play, deck heights, dome heights, transmission end play or ring and pinion backlash. Universal magnetic base may be mounted anywhere. Shockproof dial indicator has 1" of travel in .001" increments. Magnetic base and dial indicator may also be purchased separately. Part No.

Description

ALL96415..............Dial Indicator Only ALL96416..............Magnetic Base Only

Pilot Bearing Driver ALL26115 Driver eases the installation of pilot bushings or bearings.

Taper Reamers Repair or enlarge tapered holes to accept tie rod ends or ball joints. Reamer may be used in a drill with a 1/2" chuck by removing the T-handle. Part No.

Description

ALL11170..............Reamer, 7.15째, 1-1/2" Taper Per Ft. ALL11172..............Reamer, 9.56째, 2" Taper Per Ft.

Description

ALL96430..............10mm ALL96432..............12mm ALL96434..............14mm ALL96438..............18mm ALL11010

Tubing Cutters

Cut plastic, aluminum, copper or steel tubing without distorting or crushing. Standard cutter works with tubing from 1/8" up to 1-1/8" ALL11011 and has wide rollers for even tracking of cutter wheel, built in reamer for cleaning inside of tubing and an extra cutting wheel. Mini-cutter can cut tubing from 1/8" to 5/8" in tight areas. Part No.

Description

ALL11010..............Mini ALL11011..............Standard

Double Flare Tool ALL11015 Double flares 3/16", 1/4", 5/16", 3/8" and 1/2" steel or aluminum and .040" copper tubing at 45 degrees, the most common flare used in custom brake and fuel lines. Includes detailed instructions and a convenient plastic storage case.

Swivel Head Brake Pressure Gauge ALL11020 Gauge replaces the bleeder screw in brake calipers and measures brake pressure. Swivel head positions the gauge for easy viewing. Part No.

Description

ALL11022..............Adapter To Use Brake Pressure Gauge With GM Metric Calipers ALL11022

8

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Funnels

Caps And Plugs ALL40109

A must for keeping debris out of lines and hoses on dry sump pumps, fuel pumps, pressure regulators, etc. Caps and plugs fit 37째 flared fittings and straight threaded ports. Available in plastic and aluminum.

ALL40108

ALL50801

ALL50811

Cap Part No. ALL40100

ALL40102

ALL40104

ALL40106

Heavy duty plastic funnels are perfect for topping off fuel or other liquids. Available in several sizes. Part No.

Description

Plug Part No.

ALL50821

ALL50831

AN Size

Thread Size

No. Per Pkg.

-3 -4 -6 -8 -10 -12 -16

3/8"-24 7/16"-20 9/16"-18 3/4"-16 7/8"-14 1-1/16"-12 1-5/16"-12

20 20 20 20 10 10 10

-3 -4 -6 -8 -10 -12 -16

3/8"-24 7/16"-20 9/16"-18 3/4"-16 7/8"-14 1-1/16"-12 1-5/16"-12

20 20 20 20 10 10 10

Plastic Caps And Plugs

ALL50801 ALL50802 ALL50803 ALL50804 ALL50805 ALL50806 ALL50807

ALL50811 ALL50812 ALL50813 ALL50814 ALL50815 ALL50816 ALL50817

ALL40100..............6 Qt. Funnel With Brass Screen, Most Common Fuel Funnel ALL40102..............2 Qt. Funnel With Brass Screen ALL40104..............1 Pint Funnel With Brass Screen ALL40106..............4 Oz. Mini Funnels, Sold In Pairs (One With And One Without Screen) ALL40108..............1 Pint Extended Funnel, For Automatic Transmissions And Other Hard-To-Reach Applications ALL40109..............Funnel Fill Adapter (Reduces Outlet Size)

Aluminum Caps And Plugs

Mini Quick Fill Can ALL10098

Cap And Plug Kits

ALL50821 ALL50822 ALL50823 ALL50824 ALL50825 ALL50826 ALL50827

ALL50831 ALL50832 ALL50833 ALL50834 ALL50835 ALL50836 ALL50837

Molded plastic, 2-1/2 gallon mini quickfill will conveniently fill generators, golf carts, mini-bikes, etc. Can is 26" tall.

Kits include 5 of each size, -3 to -16.

Carb Stand ALL26200

Part No.

Description

ALL50800..............Plastic Cap Kit ALL50810..............Plastic Plug Kit ALL50820..............Aluminum Cap Kit ALL50830..............Aluminum Plug Kit

Aluminum stand simplifies carb maintenance and will hold carb off of work bench surface. Works with Edelbrock, Quadrajet, and Holley 2- and 4-barrel carbs.

Carb Hats Use when air cleaner must be removed. Screen type hat is recommended when adjusting valves. Black plastic. Part No.

Description

ALL26040

ALL26042

ALL26040..............Carb Hat Without Screen ALL26042..............Carb Hat With Screen

Wyatt Kelley

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

9

performance

TOOLS & ACCESSORIES


performance

TOOLS & ACCESSORIES Steel -12 Wrench ALL11180

Tie Rod Socket With Extension 26"

Twelve point wrench has a rubber hand grip and is a must for tightening -12AN hose ends on a dry sump pump. Tighten all hose ends in seconds.

ALL10243 A socket and an extension to tighten inner tie rod end bolts on most rack and pinions, 15/16" hex head socket and a 1/2" drive.

Toe Plates ALL10117

Aluminum Adjustable Wrenches Eliminate guessing which wrench is needed to tighten, remove or check steel braided hose fittings. Aluminum wrenches prevent damage to fitting and are available in two sizes: 8" for fittings up to a -10, and 10" for fittings up to -20. Part No.

Size

ALL11152..............8" Wrench ALL11153..............10" Wrench

Easily set toe in/out with two tape measures. Plates are 11" x 32". Sold two per set.

Toe Gauge ALL10118 Adjust toe-in /out quickly and easily. Adjustable to all tread widths, measures from 49" to maximum width of 89".

Set-Up Plates Aluminum Wrench Set ALL11100 Five piece, aluminum wrench set for use with aluminum ANstyle, braided hose fittings. Sizes include: -6, -8, -10, -12, and -16. Each wrench is finished in different color anodizing for easy identification. Also sold individually.

Individual Wrenches Part No.

Size

Part No.

Size

ALL11106..............-6 ALL11112 .......-12 ALL11108..............-8 ALL11116 .......-16 ALL11110..............-10 ALL11118 .......-20 Note: -20AN wrench not included in set.

Double-Ended Aluminum Wrench Set ALL11120 Wrenches make quick work of checking both halves of a fitting when the line is installed. Fittings need no longer be marred by steel wrenches. Wrenches are also sold individually.

Set-up plates help square, string, and check axle tubes for straightness and accurate chassis set-up. Sold individually Part No.

ALL10660

ALL10662

Description

ALL10660..............5x5, 7" x 28" ALL10662..............Wide 5, 12" x 28"

Aluminum Pit Jack Lightweight, 3,000 lb. capacity floor jack has a low profile to roll under the lowest slung chassis. Made of high quality aluminum, jack incorporates a patented hydraulic system to reach maximum height of 17-1/2". Large, two-piece handle has a spring detent to stop it at the 12 o’clock position. Rolls easily on heavy duty rear caster 2-Piece Handle With wheels. Optional dirt wing adapts Spring Detent jack for use in unpaved areas. Part No.

Description

ALL10422..............3 Pump Red ALL10425..............6 Pump Silver Replacement Parts

ALL10427..............Jack Seal Kit ALL99046..............Caster

Notched Spring Cup With Removable Rubber Insert

Individual Double-Ended Wrenches Size

Hose Wrenches (Red) Part No.

Fitting Wrenches (Blue) Part No.

-4, -6 -8, -10 -12, -16

ALL11124 ALL11128 ALL11132

ALL11126 ALL11130 ALL11134

Dirt Wing For Pit Jack ALL10426 Provides a sturdy base for the pit jack when used on a dirt surface.

Tool Tray ALL14170 Tool tray measures 12" x 18" x 3", with hooks on one side to fasten to chassis or body. The 6" stands on the opposite side keep tray level. Tray has 16 holes for spark plug and nozzle holder use.

10

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Jack Stands ALL10124

Quick Spin Lug Wrench ALL10107

Jack stands with unitized frame will support 3 tons. The ratchet locking mechanism assures safe, positive height control. Adjustable from 11-5/8" to 16-1/2". Sold in pairs.

Stack Stands Support stands can be stacked together to conserve valuable space in the trailer or the shop. Stands are 14" tall with a sturdy 12" x 15" base. Choose aluminum stands, rated at 3,000 lbs., or steel versions, rated at 3,500 lbs. Sold in pairs. Part No.

Sturdy lug wrench is made of 7/8" diameter tubing with a deep 1" socket welded to one end and a sealed bearing pressed on the other. Overall length is 18" with 7-1/2" handles. Gray powder coated finish.

Description

ALL10254 .............Steel, Red ALL10255 .............Aluminum, Silver

Economy Quick Spin Lug Wrench ALL10108

ALL10255

ALL10254

Stacked

Stacked

Lug wrench is a 1" diameter tube with a shallow 1" socket welded to one end and rotating piece of plastic pipe attached to the other. The 10" handles are angled with rubber grips and the overall length is 23".

Super Sockets

Wheel Dollies

The same pit sockets used by the race teams in NASCAR, ASA and other racing series. Super Sockets are available in steel or Kryptonite. Part No. ALL10129 ALL10134

Move cars easily to make more room in garage or shop. Dollies, in steel or aluminum, have rounded lower sections to safely cradle the tire. Steel dollies are 14-1/2" wide x 23-1/2" long with standard casters for use with cars weighing less than 2,500 lbs. Aluminum dollies are 10" wide x 15-3/4" long with standard casters for cars up to 3,500 lbs. or deluxe ball bearing swivel casters to accommodate cars up to 5,000 lbs. Deluxe casters also include one wheel brake per dolly. All dollies are sold in pairs. Part No.

Description

ALL10129..............Steel, Std. Casters, For Cars Up To 2,500 Lbs. ALL10134..............Aluminum, Std. Casters, For Cars Up To 3,500 Lbs. ALL10135..............Aluminum, Deluxe Casters, For Cars 3,500-5,000 Lbs.

Developed to meet popular demand, extension is welded on. No more extensions slipping off. 1" socket is 12" long. Clears beadlock ring on Weld Wheels.

Pit sockets are available with 5" or 11" extensions and include our Super Socket for fast wheel changes without jamming lug nuts. Sockets fit 1" lug nuts and are used with 1/2" drive impact guns.

Mats fold for easy storage and are ideal for use on asphalt, dirt, or on the garage floor. Vinyl covered pad measures 51" x 24" unfolded, 12" x 24" folded.

Part No.

Description

ALL10242..............5" Pit Socket ALL10241..............11" Pit Socket

Description

ALL10126................ Black ALL10127................ Red ALL10128................ Blue

Pit Socket With Extension ALL10240

Super Sockets With Extension

Track Mats

Part No.

Description

ALL10230..............1" Short Steel ALL10232..............1" Long Steel ALL10234..............1" Short Kryptonite ALL10236..............1" Long Kryptonite

Folded

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

11

performance

TOOLS & ACCESSORIES


performance

TOOLS & ACCESSORIES Safety Note: Use caution, these tools need to be handled with extreme care.

Pit Guns

Heated Tire Groover

Durable Allstar 60/40 ratio air impact guns have twin hammer impact mechanisms, side exhausts and billet reverse buttons. Standard impact gun is perfect for the Saturday night ALL10430 racer. The Deluxe version has a steel forward-reverse valve and is highly modified for 10,000 RPM operation and quick pit stops.

ALL10270

Part No.

Description

ALL10430 .............Standard Impact Gun ALL10432 .............Deluxe Impact Gun ALL10436 .............Whip Hose 2 Ft. ALL10438 .............Manifold For Two Impact Guns

ALL10432

Groover by Van Alstine adds extra traction in minutes. Tapered, razor sharp blade grooves fast and easy. To operate, insert a blade into the groover, set blade height with a tire depth gauge and set the power level. Place the cutting edge against the tire surface and apply pressure. Includes 4/32", 6/32", 8/32" and 10/32" flat blades. Part No.

Description

Part No.

Description

Replacement Blades (12-Pack)

ALL10436 ALL10438

Air Regulator ALL10435 Fully modified regulator is used by professional race teams everywhere. Rated at 700 CFM, the regulator permits the use of two impact guns on one bottle.

ALL10267..............#1 Round, 1/32" ALL10268..............#2 Round, 2/32" ALL10269..............#3 Round, 3/32" ALL10271..............#3 Flat, 3/32" ALL10272..............#4 Flat, 4/32" ALL10273..............#6 Flat, 6/32"

ALL10274 ......#8 Flat, 8/32" ALL10275 ......#10 Flat, 10/32" ALL10276 ......#4 Round, 4/32" ALL10277 ......#6 Round, 6/32" ALL10278 ......#8 Round, 8/32" ALL10279 ......#10 Round, 10/32"

Replacement Parts

ALL99105..............Head Assembly ALL99106..............Front Pads With Screws, 3-Pair ALL99107..............Rear Pads With Screws, 3-Pack

Tire Sander Tire Equalization Gauge ALL44040 Adjust air pressures in two tires at the same time. Large, easily read gauge face makes precise adjustments from 0-15 lbs easy. Gauge has built in fill and bleed-off valves and hoses with quick disconnect ends.

Extend the life of used tires by removing the thin layer of hardened rubber. Heavy duty 7" Milwaukee sander has a 0-6000 adjustable RPM range, to compensate for varying tire hardness, and a 10 ft. detachable cord. Backing pad and discs are sold separately. Part No.

Description

Replacement Gauge ALL44041

ALL44185..............7" Tire Sander ALL44186..............7" Backing Pad ALL44187..............7", 36 Grit Discs, 5-Pack

Tire Spoons

Tire Sipers

Steel Tire Spoon will separate tire from rim after breaking tire bead.

New 6-blade and 14-blade sipers quickly and precisely sipe tires for better traction. Units have adjustable sipe depth. Lightweight sipers use standard utility blades and are made for heavy duty use.

Part No.

Description

ALL10103..............Straight, 24" Long ALL10104..............Curved For Initial Tire Dismounting, 16-1/2" Long

Bead Breakers

Part No.

Part No.

Description

ALL10105..............Standard ALL10106..............Wide Jaw

Description

ALL10265..............6-Blade Tire Siper, Black ALL10264..............14-Blade Tire Siper, Red

Tire Grinding Discs Grind off the hardened outer “skin� on used tires and create round, aggressive sipes. Part No.

Convenient tools make quick work of breaking down even the most stubborn ALL10105 ALL10106 tire beads. Durable steel construction with rubber hand grips. Wide jaw bead breaker works well with soft sidewall tires. For use with 15" wheels.

ALL10265

Description

ALL44180..............4" Dia., 23 Grit, 5/8" Hole ALL44182..............7" Dia., 16 Grit, 7/8" Hole Safety Note: To prevent bodily injury the tire must be mounted on the car or secured in a tire holder. Eye and hand protection is required.

Tire Siper ALL10109 Cutting tires is easy with this handy tool. Push across tire; no heat required. Includes #4 head and blade.

Replacement Blade Part No.

Description

IHKBL04 .................#4 Flat Blades, 12-Pack

12

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Valve Core Tool

Paint Markers

ALL44030

Oil-based markers resist weather, washing and peeling. Perfect for writing on tires.

Easily remove and install new valve cores. Base of handle has a machined pattern to aid with grip. Ergonomically designed and crafted from stainless steel. Measures 3" in overall length.

Aluminum Ford 9" Gear Tote ALL14168 Keep Ford 9" third member neat and clean. Built-in handles ease carrying.

Part No.

Description

ALL12050..............Aluminum Tire Marker ALL12051..............Yellow Tire Marker ALL12052..............White Tire Marker ALL12053..............Red Tire Marker ALL12054..............Blue Tire Marker ALL12055..............Light Blue Tire Marker

Tire Crayons Ideal for temporary tire marking. 1/2" x 4-5/8". Part No.

Description

ALL12060..............White Tire Crayon ALL12061..............Yellow Tire Crayon

Ford 9" Set Up Carrier ALL14169 Set up carrier takes the place of the gear set on Ford 9" rear end housings and will keep dirt and debris out of the housing. A pinion bracket can be attached to the cover so the J-bar or Panhard bar can be mounted for car transportation. The tip of the handle matches the centerline of the driveshaft U-joint so driveshaft length can be easily measured. Gloss red powder coated finish.

Axle Spline Tool ALL66104 Tool clamps in a vise to hold 31-spline axles. Assures perfect alignment for maintenance or installation of axle plugs used with Gold-Trac differentials.

T-Handle Axle Puller ALL66115 All-in-one T-handle puller threads into axle for easy installation or removal. Tool includes adapters for fine or coarse 3/8" threaded solid axles, and 3/4" coarse threads for gun drilled axles.

Tire Tape Measures

ALL10111

Ten foot long tapes. Part No.

Description

ALL10111..............Economy ALL10112..............Deluxe

ALL10112

Blue Blower ALL30002 Compact, plastic blower moves up to 300 CFM of air. The quiet electric blue blower has three speeds and can be adjusted to move cooling air wherever it’s needed, up to 30 ft. away. Weighs just 8 lbs. with two built-in receptacles and a 12' long power cord.

Blue Blower Heater Accessory ALL30003 Optional heater accessory attaches to front of blower and plugs into one of the receptacles to transform blower into a heater.

Pinion Centering Jig ALL68370 Pinion centering jig locates pinion centerline when building or narrowing a rear end housing. Fits Ford 9", 12-bolt Chevy, 8-3/4 Mopar, and Dana 60 rear ends.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

13

performance

TOOLS & ACCESSORIES


performance

BODY & CHASSIS ACCESSORIES Aluminum 1" x 1" Square Tubing ALL22257*

Steel End Caps

Square tubing is 6061-T6 grade alOver 8 Foot Shipped Via Truck Freight loy with .125" wall thickness and sold in pre-cut lengths of 4', 8', 12' and 20'. Ideal for fabricating rub rails or building shop, trailer or pit equipment like ladders, pit carts and tire racks. *Add pre-cut length to the end of part number. Example: ALL22257-8 = 8 foot length

Over 8 Foot Shipped Via Truck Freight

Aluminum stock is ideal for fabricating mounting brackets, etc. Flat stock is 6061-T6, the angled aluminum is 6063-T5. 4' Length Part No.

Flat, 1" Wide x 1/8" Thick Flat, 1" Wide x 3/16" Thick Angled, 1"x1" x 1/16" Angled, 1"x1" x 1/8" Thick Angled, 1"x1" x 3/16"

ALL22250-4 ALL22251-4 ALL22253-4 ALL22254-4 ALL22255-4

Part No.

Description

Part No.

Description

Round End Caps

Square End Caps

ALL22280..............7/8" O.D. ALL22281..............1-1/4" O.D. ALL22282..............1-1/2" O.D. ALL22283..............1-5/8" O.D. ALL22284..............1-3/4" O.D.

ALL22290 ...... 1" x 1" ALL22292 ...... 2" x 2" ALL22294 ...... 2" x 3"

Gussets

Aluminum Flat And Angled Stock

Description

Cap off frame, bumpers or any tubing member. Steel caps are sold in packs of ten.

8' Length Part No.

12' Length Part No.

16' Length Part No.

ALL22250-8 ALL22250-12 – ALL22251-8 ALL22251-12 – ALL22253-8 – ALL22253-16 ALL22254-8 – ALL22254-16 ALL22255-8 – ALL22255-16

Gussets are 1/8" thick steel. Used to strengthen roll cages and chassis tubing. Part No.

Description

ALL22192..............Solid, 100-Pk. ALL22194..............With One Hole, 100-Pk. ALL22196..............With Three Holes, 100-Pk. ALL22198..............Reinforced Gusset, 10-Pk.

Wrap Around Gussets ALL22199 Gussets fit 1.50" to 1.75" tubing and can be used to join tubing from 70° to 110°. More support and rigidity than a standard flat gusset. Sold in packs of ten.

Upper A-Arm Brackets ALL60025 Steel Tubing Sold only in pre-cut lengths (4, 8, 12, or 20 ft.). We stock an assortment of round, square and rectangular chrome moly and mild steel tubing. Wall thicknesses may vary, so always check before cutting or welding, especially if the car is to be certified.

Chrome Moly (4130) Part No.

Description

ALL22000..............1/4" x .035" Round ALL22005..............3/8" x .058" Round ALL22010..............1/2" x .049" Round ALL22012..............1/2" x .058" Round ALL22015..............5/8" x .049" Round ALL22017..............5/8" x .058" Round ALL22020..............3/4" x .049" Round ALL22022..............3/4" x .058" Round ALL22024..............3/4" x .095" Round ALL22026..............3/4" x .120" Round ALL22028..............3/4" x .156" Round ALL22030..............7/8" x .058" Round ALL22032..............7/8" x .095" Round ALL22040..............1" x .049" Round ALL22042..............1" x .058" Round ALL22044..............1" x .065" Round ALL22046..............1" x .095" Round ALL22050..............1-1/8" x .058" Round ALL22060..............1-1/4" x .058" Round ALL22062..............1-1/4" x .065" Round ALL22063..............1-1/4" x .095" Round ALL22064..............1-1/4" x .120" Round ALL22070..............1-3/8" x .058" Round ALL22072..............1-3/8" x .095" Round ALL22080..............1-1/2" x .058" Round ALL22082..............1-1/2" x .065" Round ALL22084..............1-1/2" x .083" Round ALL22086..............1-1/2" x .095" Round ALL22090..............1-5/8" x .083" Round ALL22095-5.... 2-1/4" x .120" x 5' Rnd.

14

Mild Steel (1018) Part No.

Description

ALL22120..............1/2" x .065" Round ALL22124..............3/4" x .065" Round ALL22128 .............1" x .065" Round ALL22132..............1-1/4" x .083" Round ALL22133† ............1-1/2" x .083" D.O.M. ALL22134..............1-1/4" x .120" Round ALL22135† ............1-1/2" x .095" D.O.M. ALL22136..............1-1/2" x .065" Round ALL22137..............1-1/2" x .120" Round ALL22138..............1-1/2" x .095" Round ALL22139..............1-5/8" x .120" Round ALL22140† ............1-5/8" x .120" D.O.M. ALL22144..............1-3/4" x .065" Round ALL22145† ............1-3/4" x .095" D.O.M. ALL22146..............1-3/4" x .095" Round ALL22147† ............1-3/4" x .120" D.O.M. ALL22160..............1/2" x .065" Square ALL22164..............3/4" x .065" Square ALL22169..............1" x .083" Square ALL22175..............1-1/2" x .083" Square ALL22182..............2" x .083" Square ALL22183..............1" x 2" x .120" Rect. ALL22184..............2" x 3" x .083" Rect. † Tubing is Drawn Over Mandrel (D.O.M.) and has a tighter wall thickness tolerance. Note: When ordering, please add a dash and pre-cut length to end of part number. Example: ALL22044-8 is an 8' length. Only 4 ft. and 8 ft. Tubing lengths are UPSable.

Stamped, 3/16" thick mild steel brackets weld to chassis to provide a mounting point for upper control arm. Brackets are sold in pairs and have two 5/8" mounting holes, spaced 7/8" apart for adjustment. May be trimmed to desired height.

Upper A-Arm Mount ALL60190 Mount is flame cut from 1/2" thick steel, with a 6" bolt spacing. Welds to frame and accepts upper A-arm.

Coil-Over Brackets

ALL60101 ALL60100

ALL60104 ALL60103

ALL60106

Coil-Over brackets are available in five configurations: left- or right-hand notched brackets, for use where tubing runs at an angle; notched short or long straight, for easy welding to round tubing; and flat style, which is easily welded to square or rectangular tubing. Brackets include bolt, locknut and spacer. Part No.

Description

ALL60100........ Left Hand, Notched Style ALL60101........ Right Hand, Notched Style ALL60103........ Short Straight, Notched Style ALL60104........ Long Straight, Notched Style ALL60106........ Flat Mount Style ALL99100........ Replacement Bolt, Locknut And Spacer ALL99101........ Replacement Spacer Only ALL60108........ Shock Quick Pin With Shoulder, Steel ALL60109........ Shock Quick Pin Without Shoulder, Steel

ALL60108

ALL60109

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Chassis Brackets

Steering Column Brackets

Allstar offers a full selection of mild steel chassis brackets which can save time during car construction.

ALL60000

ALL60001 ALL60002

ALL60010 ALL60011

ALL60006

ALL60016

ALL60007 ALL60008 ALL60009

ALL60018 ALL60019

ALL60020

Stamped-steel brackets mount steering column in any circle track car. Brackets are 3-3/16" wide and available in four lengths. Adjustment slot fits 3/4" rod end. Part No.

Description

ALL52120..............2-1/2" Long ALL52122..............4" Long ALL52124..............8" Long ALL52126..............10" Long

Battery Boxes ALL60021

ALL60022

ALL60023

ALL60024

Universal, lightweight steel battery boxes may be welded or bolted to the frame. Boxes are available in two sizes and include hold down hardware. Part No.

Description

ALL76100..............Full Size, 11-3/4" Wide x 7-1/4" Deep ALL76101..............Short Style, 9-1/2" Wide x 7-1/4" Deep ALL60029 Part No.

ALL60000 ALL60001 ALL60002 ALL60006 ALL60007 ALL60008 ALL60009 ALL60010 ALL60011 ALL60016 ALL60018 ALL60019 ALL60020 ALL60021 ALL60022 ALL60023 ALL60024 ALL60029 ALL60030 ALL60031 ALL98120

ALL60030

ALL60031

ALL98120

Description

0.187" Chassis Tab, 2.750" Ht., No Hole 0.187" Chassis Tab 2.750" Ht., .375" Hole 0.187" Chassis Tab, 2.750" Ht., .500" Hole 0.187" Universal Flat Tab, 1.825" Ht., .500" Hole 0.250" Universal Flat Tab, 2.000" Ht., .375" Hole 0.250" Universal Flat Tab, 2.000" Ht., .500" Hole 0.125" Universal Flat Tab, 1.500" Ht., .250" Hole 0.125" Radius Tab, 1.500" Ht., .250" Hole, 1.250" Radius 0.125" Radius Tab, 1.500" Ht., .375" Hole, 1.250" Radius 0.125" Gusset Tab, 2.050" Ht., .375" Hole, 1.500" Radius 0.187" Seat Tab, 2.375" Long, .500" Hole 0.250" Seat Tab, 2.375" Long, .500" Hole 16 Gauge Window Frame Tab, 1" x 1" Steel 16 Gauge Window Frame Tab, .750" x .750" Steel 0.125" Bumper Tab, 1.250" Long, .250" Hole, .937" Flat To Center Of Hole 0.187" Rub Rail Flange, 1.250" Dia. Hole, .375" Small Holes, 2.250" Between Center Of Holes 0.085" Bell Crank Tab, 1.550" Ht., .375" Hole Brake Line Adapter Tab (Bolt-On) Brake Line Adapter Tab (Weld-On) 1.250" Ht., .650" Hole Double Shear Seat Belt Bracket Seat belt Mount Backing Plates

Quantity Per Pack

4 4 4 4 4 4 4 4 4 4 4 4 10 10 4 4 4 2 4 1 2

Lightweight Battery Box ALL76102 Designed to be quickly bolted in. Box is 11" wide x 7" deep and includes 3/8" hold down hardware. Zinc plated for corrosion resistance.

Stainless Steel Drop-Out Battery Box ALL76105 The perfect battery box for mounting under floor. Eases battery service and replacement. Box is 10-1/2" wide, 7" deep, and 9-1/2" tall and will accept most standard batteries.

Weld-On Nuts A strong and easy method of bolting brackets or accessories to chassis when the back side of the component is not accessible. Speeds up the installation and/or removal of chassis components. Nuts are offered in two coarse thread sizes, fit in a 3/4" hole and have a 1/4" shoulder to weld into place. Sold in packs of four. Part No.

Drag Race Style Battery Box ALL76106 Drag Race style battery box may be welded or bolted to any chassis. Lightweight box is 7-1/4" wide x 10-1/4" deep, and includes hold down.

Description

ALL18550..............3/8"-16 ALL18552..............1/2"-13

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

15

performance

BODY & CHASSIS ACCESSORIES


performance

BODY & CHASSIS ACCESSORIES 22"

Ribbon Window Nets

Mesh Window Nets

Durable polypropylene nets are ideal for a variety of vehicles. Webbing is double stitched with heavy nylon thread. All nets meet SFI 27.1 specifications and are appropriately tagged. Choose from square or rectangular nets in black, blue or red.

Durable, lightweight polyester mesh nets increase driver vision and stop smaller debris than conventional ribbon or string nets. Choose rectangular or angled styles in black, blue or red. NHRA, IHRA and ASA approved, meeting SFI 27.1 specs.

Border Style Part No.

Description

ALL10280..............18" x 18" Square, Black ALL10281..............18" x 18" Square, Blue ALL10282..............18" x 18" Square, Red ALL10285..............18" x 24" Rectangular, Black ALL10286..............18" x 24" Rectangular, Blue ALL10287..............18" x 24" Rectangular, Red

Part No.

18"

27"

Description

ALL10211..............22" x 18" Rectangular, Black ALL10212..............22" x 18" Rectangular, Blue ALL10213..............22" x 18" Rectangular, Red ALL10214..............22" x 27" x 18" Angled, Black ALL10215..............22" x 27" x 18" Angled, Blue ALL10216..............22" x 27" x 18" Angled, Red

Loop Style Window Nets

18"

22"

Window Net Installation Kits 18"

Round Bar ALL10217

18"

Lever latch release has a 7/16" round upper support rod for use with border style nets. Mounting brackets are included. 24" Part No.

18"

Description

ALL10290..............18" x 18" Square, Black ALL10291..............18" x 18" Square, Blue ALL10292..............18" x 18" Square, Red ALL10295..............18" x 24" Rectangular, Black ALL10296..............18" x 24" Rectangular, Blue ALL10297..............18" x 24" Rectangular, Red

Latch Type Flat Bar ALL10218 Lever latch release has a 1" x 3/16" x 29" steel bar to securely anchor the window net. Complete with mounting brackets. Part No.

Description

ALL99070..............Replacement Mounting Tabs

22"

Oblong Net ALL10288 Oblong net with border style mounting encloses more of the driver side window opening for additional protection.

18"

29"

Spring-loaded tube eliminates the latch lever release for easy entry and exit. Pushing against the handle releases or fastens the window net. Includes top spring tube, 3/4" flat aluminum for bottom of net, chassis mounting hardware, handle and instructions.

24"

Drag Style Net ALL10289 Drag style net with border style mounting attaches to 24" the diagonal door bar of most drag cars.

Spring Loaded Round Tube ALL10219

18"

Part No.

Description

ALL99071..............Replacement Mounting Tabs

Clamp-On Kits Clamp-on kit eliminates welding. Designed to clamp the ALL10219 window net installation kit to chassis tubing. Part No.

Description

ALL10221..............Kit For 1-1/2" Tubing ALL10222..............Kit For 1-3/4" Tubing ALL10219 Sold Separately

16

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


New Color!

4'x8' Plastic Sheets

Aluminum Aluminum sheets are 4 ft. x 10 ft., .040" thick, and available in most popular colors. Part No.

Sheet plastic is available in two thicknesses, .070" and .100". The .070" thick sheets are the same thickness as our rolled plastic and are available in black or white. The .100" thick sheets are available in many of the same colors as our rolled plastic. Part No.

Description

ALL22246..............0.070" Thick, White ALL22248..............0.070" Thick, Black ALL22460..............0.100" Thick, White ALL22461..............0.100" Thick, Black ALL22462..............0.100" Thick, Red ALL22463..............0.100" Thick, Pepsi Blue (Light) ALL22464..............0.100" Thick, Chevron Blue (Med.) ALL22465..............0.100" Thick, Orange ALL22466..............0.100" Thick, Yellow

ALL22240

Quality 24" wide by .070" thick plastic can be used for fender extensions, skirts, body patchwork, etc. Sold in pre-cut lengths (10, 25 and 50 ft.).

4' x 8' sheets are .063" thick and provide an attractive, shiny, non-slip finish for trailer floors, steps, etc.

10 Ft. Roll Part No.

25 Ft. Roll Part No.

50 Ft. Roll Part No.

ALL22400 ALL22405 ALL22410 ALL22415 ALL22420 ALL22425 ALL22430 ALL22440

ALL22401 ALL22406 ALL22411 ALL22416 ALL22421 ALL22426 ALL22431 ALL22441

ALL22402 ALL22407 ALL22412 ALL22417 ALL22422 ALL22427 ALL22432 ALL22442

Black White Red Pepsi Blue (Light) Orange Yellow Purple Chevron Blue (Med.)

Aluminum And Diamond Plate Shipped Freight Truck, Six Sheet Minimum.

Diamond Plate Aluminum

Rolled Plastic

Color

Description

ALL22200..............Plain ALL22201..............Chrome (Bright Clear) ALL22202..............White ALL22203..............Xtreme Red ALL22204..............Red ALL22205..............Bright Gold ALL22206..............Gloss Black ALL22207..............Black On Black ALL22208..............Flat Black ALL22210..............Shell Gray (Med.) ALL22211..............Xtreme Green ALL22212..............Pepsi Blue (Light) ALL22213..............Chevron Blue (Med.) ALL22214..............Heron Blue (Dark) ALL22215..............Orange ALL22216..............Yellow ALL22217..............Xtreme Purple ALL22218..............Maroon

Stainless Wire Screen Use Screen to protect radiators, oil coolers or other items. Size referenced is the approximate opening of the screen. Part No.

Description

5/64" (.025" Wire Diameter)

ALL22260..............12" x 36" ALL22262..............36" x 36" 1/8" (.035" Wire Diameter)

Polycarbonate Sheeting

ALL22265..............12" x 36" ALL22267..............36" x 36" ALL22268..............36" x 48" 3/16" (.047" Wire Diameter)

Scratch Proof – Material does not scratch easily when hit by debris, or when cleaned. Most popular for windshields, but also may be used for side and rear windows. Standard – Less expensive, commonly used for side and rear windows. Can also be used for windshields, but scratches easily. Part No.

Description

ALL22220..............36" x 72", 0.118" Thick Scratch Proof, 2-Sides ALL22223..............40" x 72", 0.118" Thick Scratch Proof, 2-Sides ALL22222..............72" x 96", 0.118" Thick Scratch Proof, 2-Sides ALL22228..............40" x 72", 0.093" Thick Standard ALL22224..............40" x 72", 0.118" Thick Standard ALL22226..............72" x 96", 0.118" Thick Standard Note: Scratch-proof sheets are UPSable with a $5.00 box charge.

5/64"

1/8"

ALL22270..............12" x 36" ALL22272..............36" x 36" ALL22273..............36" x 48" 3/16"

Body Bolt Kits Bolts are designed for easy installation and removal, have 1/4"-20 thread, are 3/4" long and have a captured washer. Nuts have serrations to prevent loosening. Body bolts may be used anywhere a bolt with a captured washer is needed. Black phosphate coated. Part No.

Description

ALL18560..............Body Bolts, 10-Pack ALL18560-50 .......Body Bolts, 50-Pack

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

17

performance

BODY & CHASSIS ACCESSORIES


performance

BODY & CHASSIS ACCESSORIES Quick Turn Fasteners and Accessories Cadmium plated fasteners speed removal of body panels and are available in two body lengths to accommodate various material thickness.

A

H

B

I

J D

F

G

K

L

1"

Description

10 Pack Part No.

50 Pack Part No.

Steel Fasteners A Small Head .400" Long Body* ALL18990 ALL18992 A Small Head .450" Long Body* ALL18996 ALL18998 A Small Head .500" Long Body* ALL19000 ALL19002 A Small Head .550" Long Body* ALL19006 ALL19008 A Small Head .650" Long Body* ALL19010 ALL19012 A Large Head .500" Long Body* ALL19100 ALL19102 A Large Head .550" Long Body* ALL19110 ALL19112 B Small Wing Head .400" Long Body*† ALL19040 ALL19042 B Small Wing Head .450" Long Body*† ALL19046 ALL19048 B Small Wing Head .500" Long Body*† ALL19050 ALL19052 B Small Wing Head .550" Long Body*† ALL19056 ALL19058 B Small Wing Head .650" Long Body*† ALL19060 ALL19062 C Flush Head .400" Long Body ALL19190 ALL19192 C Flush Head .500" Long Body ALL19200 ALL19202 C Flush Head .550" Long Body ALL19210 ALL19212 D Oval Head .400" Long Body ALL19216 ALL19218 D Oval Head .500" Long Body ALL19220 ALL19222 D Oval Head .550" Long Body ALL19230 ALL19232 E Wing Head .400" Long Body ALL19236 ALL19238 E Wing Head .500" Long Body ALL19240 ALL19242 E Wing Head .550" Long Body ALL19250 ALL19252 Aluminum Fasteners C Flush Head .400" Long Body ALL19260 ALL19262 C Flush Head .500" Long Body ALL19266 ALL19268 C Flush Head .550" Long Body ALL19270 ALL19272 D Oval Head .400" Long Body ALL19280 ALL19282 D Oval Head .500" Long Body ALL19286 ALL19288 D Oval Head .550" Long Body ALL19290 ALL19292 Springs F Small Head Spring .250" Reach ALL19300 ALL19302 F Small Head Spring .325" Reach ALL19310 ALL19312 G Large Head Spring .325" Reach ALL19320 ALL19322 G Large Head Spring .375" Reach ALL19330 ALL19332 G Large Head Spring .425" Reach ALL19336 ALL19338 Brackets .0625" Thick H Small Head Bracket-No Spring ALL19340 ALL19342 H Small Head Bracket w/ALL19300 Spring ALL19350 ALL19352 I Left Hand Weld-On Tab ALL19380 ALL19382 J Right Hand Weld-On Tab ALL19384 ALL19386 K Left Hand Rivet-On Tab ALL19390 ALL19392 L Right Hand Rivet-On Tab ALL19394 ALL19396 Lightweight Quick Turn Brackets .0625" Thick M Lightweight Bracket For Large Spring ALL19360 ALL19362 N Lightweight Bracket For Small Spring ALL19364 ALL19366 *Self-ejecting body. †Small wing head fasteners come with an under head spring.

C

E

Key

1-3/8"

M

N

Quick Turn Wrench ALL19400 Fits slot head fasteners and reduces the risk of body or fastener damage.

TECH TIP

Quick Turn Fastener Measurement Guidelines To find (A) Fastener Length, add together (B) Spring Reach and (C) Material Thickness (including bracket if applicable). A=B+C Quick Turn Fastener Selection • Determine the total thickness of the panels being joined including mounting brackets and the space between the panels, if any. • Select the body length and spring height combination that provides the proper thickness range.

18

Part No. and (B) 1" Springs

(A) .400"

.450" .500" .550" (C) Total Material Thickness Range

.600"

ALL19300 .250" .165"-.200" .215"-.250" .265"-.300" .315"-.350" .365"-.400" ALL19310 .325" .098"-.133" .148"-.183" .198"-.233" .248"-.283" .348"-.383" 1-3/8" Springs

(C) Total Material Thickness Range

ALL19320 .325" .105"-.148" .155"-.198" .205"-.248" .255"-.298" .355"-.398" ALL19330 .375" .055"-.098" .105"-.148" .155"-.198" .205"-.248" .305"-.348" ALL19336 .425" .005"-.048" .055"-.098" .105"-.148" .155"-.198" .255"-.298"

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Aluminum Head Rivets And Back-Up Washers

Cleco Fasteners

Small rivets have 3/8" dia. aluminum heads and large rivets have 5/8" dia. aluminum heads.

Reusable Cleco Pins temporarily connect pieces of sheet metal up to 1/4" thick during fitting.

Part No.

Quantity

Color

Pin Type

Head Size

Grip Range

Mandrel

3/16" Rivets ALL18101 250 Silver Small 1/8" To 1/4" Steel ALL18103 250 Silver Small 1/4" To 3/8" Steel ALL18105 250 Silver Small 3/8" To 1/2" Steel ALL18107 250 Silver Small 1/8" To 1/4" Aluminum ALL18109 250 Silver Small 1/4" To 3/8" Aluminum ALL18114 250 White Small 1/4" To 3/8" Steel ALL18120 250 Red Small 1/4" To 3/8" Steel ALL18126 250 Black Small 1/4" To 3/8" Steel ALL18132 250 Pepsi Blue Small 1/4" To 3/8" Steel ALL18136 250 Orange Small 1/4" To 3/8" Steel ALL18138 250 Yellow Small 1/4" To 3/8" Steel ALL18141 250 Silver Large 1/8" To 1/4" Steel ALL18143 250 Silver Large 1/4" To 3/8" Steel ALL18145 3000 Silver Large 1/4" To 3/8" Steel ALL18147 250 Silver Large 3/8" To 1/2" Steel ALL18149 250 Silver Large 1/8" To 1/4" Aluminum ALL18151 250 Silver Large 1/4" To 3/8" Aluminum ALL18153 250 Silver Large 3/8" To 1/2" Aluminum ALL18156 250 White Large 1/4" To 3/8" Steel ALL18162 250 Red Large 1/4" To 3/8" Steel ALL18168 250 Black Large 1/4" To 3/8" Steel ALL18174 250 Pepsi Blue Large 1/4" To 3/8" Steel ALL18176 250 Blue Large 1/4" To 3/8" Steel ALL18178 250 Orange Large 1/4" To 3/8" Steel ALL18180 250 Yellow Large 1/4" To 3/8" Steel 1/8" Rivets ALL18190 500 Silver Small 1/8" To 1/4" Aluminum ALL18191 25 Silver Small 1/8" To 1/4" Aluminum ALL18192 500 Silver Small 1/4" To 3/8" Aluminum ALL18194 25 Silver Small 1/8" To 3/8" Aluminum ALL18196 500 Silver Small 1/8" To 1/4" Stainless ALL18197 25 Silver Small 1/8" To 1/4" Stainless Back-Up Washers ALL18200 1/8" I.D. X 1/2" O.D. Aluminum - PKG. Of 500 ALL18202 3/16" I.D. X 1/2" O.D. Aluminum - PKG. Of 500

Small Head Flange Type

Small Head Multi-Grip

Description

ALL18222..............1/8" Diameter Pins, 10 Pack ALL18223..............1/8" Diameter Pins, 25 Pack ALL18224..............1/8" Diameter Pins, 100 Pack ALL18226..............3/16" Diameter Pins, 10 Pack ALL18227..............3/16" Diameter Pins, 25 Pack ALL18228..............3/16" Diameter Pins, 100 Pack

CLECO TECH TIP Drill holes to install Clecos one drill size smaller to assure a tight fit.

Clamp Type ALL18230 A very strong spring clamp will hold pieces together when drilling is not an option. The 1" deep smooth throat prevents paint damage and has a maximum clamping range of 1/2". Works with ALL18220 Cleco pliers.

Cleco Pliers ALL18220 Unique tool readily installs and removes Cleco fasteners.

Hand Rivet Gun ALL18206 Includes interchangeable nose pieces for 3/32", 1/8", 5/32", and 3/16" dia. rivets.

Deluxe Hand Rivet Gun ALL18208

Multi-Grip and Flange Style Rivets New style rivets require no back-up washers. Boxes of 250.

Part No.

Medium Head Flange Type

Part No.

Description

Quantity

Color

Head Size

Grip Range

Mandrel

ALL18110 ALL18182 ALL18183 ALL18184 ALL18186 ALL18187 ALL18188 ALL18189

Multi-Grip Flange Style Flange Style Flange Style Flange Style Flange Style Flange Style Flange Style

250 250 250 250 250 250 250 250

Silver Silver Silver Silver Black Black White Red

Small Medium Medium Small Small Medium Medium Medium

3/16" to 3/8" 1/8" to 3/8" 1/8" to 3/8" 1/8" to 3/8" 1/8" to 3/8" 1/8" to 3/8" 1/8" to 3/8" 1/8" to 3/8"

Steel Steel Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum

Gun's contoured grips are designed for comfort. Hideaway storage area in bottom grip secures nosepieces and wrench. Includes nose pieces for 3/32", 1/8", 5/32" and 3/16" dia. rivets.

Air Rivet Gun ALL18207 Heavy duty gun can be used with steel or aluminum rivets from 3/32" to 3/16".

Rivet Gun For Cordless Drill ALL18205

Replacement Parts

Gun fits cordless drills to speed up installation of “blind” rivets. Recommended drill: 500 watt minimum.

ALL18209..............Jaws ALL18210..............Jaw Case ALL18211..............Jaw Spring ALL18212..............Jaw Nose ALL18213..............O-Ring

3/16" Double Ended Drill Bits ALL18204 Double ended 3/16" bits are a must for every toolbox. Package of 6.

Part No.

Description

ALL18209

ALL18211 ALL18210

ALL18212

ALL18213

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

19

performance

BODY & CHASSIS ACCESSORIES


performance

BODY & CHASSIS ACCESSORIES Ludwig Clamps ALL18232

Nyloc Nuts

Use clamps to secure dash access panels, deck lids and other items. Sold in packs of four.

Thin Nyloc nuts have the same features as standard size, but weigh up to 50 percent less. Nylon insert allows nut to be installed and removed many times without damaging threads. Sold in packages of ten.

Access Panels

Part No.

Aluminum panels can be mounted to provide easy access to dry sump pump tanks, fuel cells or other under panel items. Kits include frame, access door, hinge, quick turn fastener and quick turn fastener spring. Part No.

Steel Hood Pin Kits Kits include two each: 1/2" dia. chrome steel pins, chrome steel scuff plates, clips, and four nuts. Available with flip-over or hairpin-style clips.

Description

ALL18530..............6" x 6" Panel ALL18532..............6" x 14" Panel

Part No.

Use steel hinge kits on hoods and deck lids for quick, one person inspection of engine compartment or trunk area. Kits include two complete hinges. Description

ALL18522..............Universal Hinge 2-1/4" Long, 5/8" Tall, 1/4" Hole ALL18523..............Universal Hinge 3" Long, 1-1/4" Tall, 1/4" Hole, Radiused Edges For Added Strength

Add weight where it’s needed. Available in 25, 30 and 40 pound blocks.

Part No.

Blue anodized aluminum brackets allow mounting ballast quickly. Brackets are tapped with a 1/2"-13 hole for a ballast mounting stud. Mounting stud and nut must be purchased separately.

ALL14195

Description

ALL18506..............1/4" Flip-Over Clip ALL18507..............Silver Pin ALL18508..............Red Pin ALL18509..............Blue Pin

ALL18510 .......Black Pin ALL18511 .......Gold Pin ALL18518 .......Aluminum Scuff Plate

Kits include two aluminum 3/8" dia. pins, two aluminum scuff plates, two flip over style 3/16" dia. steel clips, and four nuts. Clip flips over stud and locks into place. Over-center action keeps clip in place.

Mount ballast or components. Black brackets have a 1/2"-13 tapped hole for a mounting stud. Stud and nut must be purchased separately. Description

Part No. ALL14189 ALL14190

Description

ALL18480..............Silver (Plain) Kit ALL18481..............Red Anodized Kit ALL18482..............Blue Anodized Kit

Part No.

Description

ALL18483 ...... Gold Anodized Kit ALL18484 ...... Black Anodized Kit

Replacement Parts

ALL18487..............Silver Pin ALL18488..............Red Pin ALL18489..............Blue Pin ALL18490..............Gold Pin

Hood Pin Mounts Mounts ease hood pin installation. Choose from 1/2"-20 or 3/8"-24 thread.

20

Description

ALL18503 .......Gold Anodized Kit ALL18504 .......Black Anodized Kit

Aluminum Hood Pin Kits 3/8" Pins And 3/16" Clips

ALL14187

ALL14178..............Fits 1" O.D. Round Tubing ALL14183..............Fits 1-1/4" O.D. Round Tubing ALL14184..............Fits 1-3/8" O.D. Round Tubing ALL14185..............Fits 1-1/2" O.D. Round Tubing ALL14187..............Fits 1-3/4" O.D. Round Tubing ALL14188..............Fits 2" O.D. Round Tubing ALL14189..............Fits 2" x 2" Square Tubing ALL14190..............Stud And Nut, 1/2"-13 x 6" Long

Part No.

Replacement Parts

ALL14195..............Fits 1-1/2" O.D. Round Tubing ALL14197..............Fits 1-3/4" O.D. Round Tubing ALL14190..............Stud And Nut, 1/2"-13 x 6" Long

Ballast Brackets

Description

ALL18500..............Silver (Plain) Kit ALL18501..............Red Anodized Kit ALL18502..............Blue Anodized Kit

Economy Ballast Brackets

Part No.

ALL18506..............1/4" Flip-Over Clip ALL18515..............3/16" Flip-Over Clip ALL18516..............5/32" Hairpin Clip ALL18517..............Chrome Scuff Plate ALL18518..............Aluminum Scuff Plate

Kits include two each: 1/2" dia. aluminum pins, aluminum scuff plates, flip over style, 1/4" dia. steel clips, and four nuts. Clip flips over stud, locks into place and over-center action keeps pin in place.

Description

ALL14180..............25 Lb. 4" x 8" x 2" ALL14179..............30 Lb. 2-1/2" x 2-1/2"x12" ALL14182..............40 Lb. 12" x 3-1/2" x 2-1/2"

Part No.

Replacement Parts

Aluminum Hood Pin Kits 1/2" Pins And 1/4" Clips

Ballast Part No.

Description

ALL18512..............Kit With 3/16" Dia. Flip-Over Clips ALL18513..............Kit With 1/4" Dia. Flip-Over Clips ALL18514..............Kit With 5/32" Dia. Hairpin Clips

Hinge Kits

Part No.

Description

ALL18238-10 .......1/2"-20 RH ALL18240-10 .......5/8"-18 RH ALL18242-10 .......3/4"-16 RH

ALL18491 ...... Black Pin ALL18515 ...... 3/16" Flip-Over Clip ALL18519 ...... Alum. Scuff Plate 3/8" Hole

Lightweight Hood Pin Kits

Part No.

Description

Quantity Per Package

ALL18521 ALL18521-50 ALL18520 ALL18520-50

3/8" Hood Pin Boss 3/8" Hood Pin Boss 1/2" Hood Pin Boss 1/2" Hood Pin Boss

2 50 2 50

Part No.

Description

ALL18472..............3/8" Silver ALL18473..............3/8" Black ALL18476..............1/2" Silver ALL18477.......1/2" Black

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Jam Nuts

Head Rests

Allstar Jam Nuts secure rod ends on linkages, suspension and steering components. Available in steel or aluminum in many thread sizes.

Fits 1-3/4" upper roll cage hoop to provide head support. Enclosed clamps permit easy horizontal and vertical adjustment. MIG-welded stem is padded for safety and has adjustment holes spaced 1/2" apart. Cover is attached to 4-3/4" diameter headpiece with a drawstring.

Size

Steel Part No.

Alum. Part No.

1/4" RH ALL18250 – 1/4" LH ALL18251 – 5/16" RH ALL18252 – 5/16" LH ALL18253 – 3/8" RH ALL18254 – 3/8" LH ALL18255 – 7/16" RH ALL18256 – 7/16" LH ALL18257 – 1/2" RH ALL18258 – 1/2" LH ALL18259 – 5/8" RH ALL18260 ALL18280 5/8" LH ALL18261 ALL18281 3/4" RH ALL18262 ALL18282 3/4" LH ALL18263 ALL18283 3/4" RH ALL18264* – 7/8"-10 RH ALL18266 (Sway Bar Adj. Nut) – 1"-8 RH ALL56110 (Jack Bolt Nut) – *Commonly used with UBM35-1107, 3/4"-10 Jack Bolt

Description

ALL10224..............6" Support ALL10226..............8" Support ALL10227..............Replacement Pad With Cover

Helmet Hooks Lightweight aluminum hook clamps on roll cage tubing and provides an anchor for attaching helmet strap. Part No.

Description

ALL10228..............Hook For 1-1/2" Tubing ALL10229..............Hook For 1-3/4" Tubing ALL10445..............Reducer Bushing 1-3/4" To 1-5/8"

Radio Boxes

Steel Jam Nut Assortments Left and right hand assortments contain five each of 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" and 3/4" nuts. Part No.

Part No.

Description

ALL18290..............35 Asst. RH Jam Nuts ALL18291..............35 Asst. LH Jam Nuts

Aluminum radio box has a padded insert to absorb vibration. Clamps to roll bar tubing and fits most racing radios. Measures 4"W x 2.5"D x 7"H. Part No.

Description

ALL10440..............Box For 1-3/4" Tubing ALL10442..............Box For 1-1/2" Tubing

Aluminum Line Clamps

Reducer Bushing 1-3/4" To 1-5/8" ALL10445

Clamps have removable neoprene cushions to protect brake/ fuel/oil lines, ignition wires or battery cables. Mounting hole is 1/4". Sold in packages of 10.

Allows Allstar Radio Box (ALL10440) to be clamped to 1-5/8" tubing.

Part No.

Clamp Size

Tachometer Brackets

ALL18300..............3/16" ALL18301..............1/4" ALL18302..............3/8" ALL18303..............1/2" ALL18304..............5/8" ALL18305..............3/4" ALL18306..............7/8" ALL18307..............1" ALL18308..............1-1/4"

Lightweight, anodized aluminum bracket clamps to roll bar tubing. Part No.

Universal Brackets Universal aluminum brackets may be drilled, and tapped, to custom mount just about anything.

Nylon Line Clamps Nylon line clamps are tough, resistant to aging and are easily cleaned. Clamps are black, and sold in packages of 10. Part No.

Clamp Size

ALL18310.............3/16" ALL18311..............1/4" ALL18312..............3/8" ALL18313..............1/2"

Description

ALL10450..............Bracket For 1-1/2" Tubing ALL10451..............Bracket For 1-3/4" Tubing

Part No.

Clamp Size

ALL18314 .................5/8" ALL18315 .................3/4" ALL18316 .................7/8" ALL18317 ...................1"

Hanging Brake Pedal Mount ALL54060

Part No.

Description

ALL10452..............Bracket For 1-1/4" Tubing ALL10453..............Bracket For 1-1/2" Tubing ALL10454..............Bracket For 1-3/4" Tubing

Nomex Shifter Boot ALL54130 Black, thermal Nomex boot keeps fire out of driver compartment. Boot is 7" tall with Velcro strap closure at top. Base is 5" x 7".

Welds to chassis for Wilwood style hanging pedals.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

21

performance

BODY & CHASSIS ACCESSORIES


performance

BODY & CHASSIS ACCESSORIES High Back Poly Seat

Race Mirror

High back poly seats are an excellent choice for off-road, street or drag race vehicles. The high back gives full support and the optional cushions and vinyl cover are very comfortable. Six 3/8"-16 threaded inserts accept mounts or tracks. Formed openings accommodate a 5-point safety harness. Cushions are available in soft, 1-1/2" thick and firm 3/4" thick, both are 33" long to cover seat and back.

ALL76404

Part No.

Description

ALL98102..............High Back Poly Seat ALL98103..............Poly Seat Cushion, 1-1/2" Low Density (Soft), Gray ALL98104..............Poly Seat Cushion, 3/4" High Density (Firm), Black ALL98106..............Poly Seat Cover, Black Vinyl

Seat Track Assembly

Full view, four panel tinted mirror is 27-3/4" x 2-3/8" to eliminate blind spots. Includes mounting bracket.

Natural Action Throttle Pedal Kit ALL54102 Aluminum pedal matches the ankle’s natural motion. Three adjustable linkage points permit 27 different motion combinations. Bolts to the floor and has a self-contained return spring and adjustable stop. Solid links and built-in pull back help eliminate stuck throttle. Cross shaft fits various footboxes and welds in place.

ALL98100

Replacement Parts

Mount aftermarket seats quickly and easily. Includes two seat tracks, adjustment handle and hardware. Fits Allstar Poly Seat.

ALL54103..............Linkage Kit ALL54104..............Pedal Only ALL54105..............Cross Shaft With Mounting Bracket

Part No.

Description

ALL54100

ALL54101

Gas Pedals Seat Belts A wise addition to any hot rod or antique car not originally equipped with seat belts. Available in two-point, nonretractable or three-point retractable. Non-retractable lap belts are manually tightened and mount to two points on the vehicle floor. Retractable systems have three anchoring points, two on the vehicle floor and one on the B-pillar. Both have easy push-button release and are sold individually. Choose from four colors.

Non-Retractable 2-Point Seat Belts Part No.

Description

ALL98110..............Black ALL98112..............Charcoal ALL98111..............Gray ALL98113..............Tan

Retractable 3-Point Seat Belts Part No.

Description

ALL98115..............Black ALL98117..............Charcoal ALL98116..............Gray ALL98118..............Tan

Seat Belt Anchors ALL98120 Anchor plates are for use with seat belt systems. Sold per pair.

22

Flat and roller pedals can be pulled back if throttle sticks. Both mount through the foot box panel. The roller pedal, uses a nylon roller for smooth throttle control and has three linkage holes or adjustment. Part No

Description

ALL54100..............Standard Pedal Assembly ALL54101..............Roller Pedal Assembly

Throttle Pedal Assembly ALL54106 Rugged aluminum pedal may be mounted to the floor pan or lower frame rail for smooth, safe throttle control. Includes return spring bracket and fasteners.

Throttle Cable ALL54145 Throttle cable fits injected or carbureted sprint cars. Cable is 5 ft. long with 10/32" threaded ends.

Floor Pedal Plate ALL54050 Weld-in plate is 19" x 5" x 1/8" and provides proper spacing for mounting pedal/master cylinder assemblies.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Cool Shirt™ Personal Cooling Systems

Cool Shirts

Eliminate heat-induced fatigue and gain a competitive edge with a Cool Shirt system. Maintaining a comfortable core body temperature reduces dehydration and increases mental awareness for faster decision making and reaction time. Add ice and water to the cooling unit, and the pump will supply cool water to 40% of the body. Includes eight feet of insulated hose with quick disconnects. Choice of four systems. Shirts are sold separately.

Compatible with all Cool Shirt systems, shirts are available in three styles: white cotton short sleeved, blue cotton short sleeved, and Firewear long sleeved. Firewear’s unique fiber emits a noncombustible gas when exposed to flame which smothers the flame much like a fire extinguisher. Up to 50 ft. of medical grade capillary tubing is securely stitched to the front and back of each shirt. Part No.

Square System ALL13030 The 12 qt. Platinum System™ maximizes driver comfort. • Dimensions: 14"L x 9-1/2"W x 11"H • Cooling Time: 3+ Hours • Power Requirements: 2 AMP/12V

Round System ALL13032 The Round System has a smaller “footprint” and is designed for limited space. The threaded lid eases filling and draining and eliminates spills. Very portable. • Dimensions: 13"H x 8 -1/2" Diameter • Cooling Time: 2 Hours • Power Requirements: 2 AMP/12V

Standard

Size

Standard Cotton Short Sleeve

ALL13050..............Small ALL13051..............Medium ALL13052..............Large ALL13053..............X-Large ALL13054..............XX-Large

Blue

Blue Cool Shirt

ALL13070..............Small ALL13071..............Medium ALL13072..............Large ALL13073..............X-Large ALL13074..............XX-Large Firewear Cool Shirt

ALL13080..............Small ALL13081..............Medium ALL13082..............Large ALL13083..............X-Large ALL13084..............XX-Large

Firewear

Mounting Tray With Strap ALL13040 Portable 6Pk Bag System ALL13036 The portable bag system can easily be secured to any driver compartment. The double insulated pump can be connected to any switched 12 volt power source. Bag dimensions are 11"L x 7"W x 10"H.

Port-A-Cool Sys tem Kit ALL13034 The Port-A-Cool System Kit uses freeze spray supplied from an aerosol can. The system can be activated as often as needed by the user. Depress the valve on the spray can for a few seconds, and the spray will circulate through the Cool Shirt™ for several minutes of immediate heat relief. Basic system includes all fittings and tubing to supply the freeze spray, one can of spray and a can holder with belt loop. Additional cans of freeze spray are available. Part No.

Description

ALL13041..............Replacement Freeze Spray

14" x 9" tray secures round or square Cool Shirt system. Mount to chassis. Strap eases removal for cleaning.

Temperature Control Switch ALL13042 Turn the system on and off and control the speed of the pump to regulate the coolant cycled through the system.

Safety Connector Kit ALL13046 Convert standard Cool Shirt fittings to quick disconnect. Connectors pull apart for a safe, speedy exit from vehicle.

Fitting Kit ALL13043 Kit includes four male and two female connectors to replace damaged or leaking Cool Shirt system fittings.

Drain Kit ALL13045 Use the kit with the circulating pump to drain water from the Cool Shirt system without removing cooler.

8' Replacement Hose ALL13044 Hose connects the cooler assembly to the Cool Shirt. Replace damaged or leaking hoses, or use one cooling system in multiple vehicles without moving water lines. Includes a supply and return line.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

23

performance

BODY & CHASSIS ACCESSORIES


performance

BODY & CHASSIS ACCESSORIES Components Sold Individually

Driver Air System

Drink Bottle Kit Drink bottle clamps to roll bar in any convenient spot. Great for circle track drivers during pit stops or yellow flags. Lightweight aluminum holder includes replaceable, insulated bottle. Part No.

Helmet Not Included

The driver air system draws filtered air from inside the driver compartment or outside the vehicle, depending upon which motor assembly is used. Air travels through the cool pack and then to the helmet. The cool pack holds blocks of ice to cool the air via an aluminum exchanger. Part No.

Description

Part No.

Description

ALL13003.......Cooler Pack (13"x9.5"x9"H) ALL13007...........2-1/2" To 1-1/4" Hose Adapter ALL13004.......4' Helmet Hose With Ends ALL13006...........10' Helmet Hose With Ends ALL13005.......6' Helmet Hose With Ends Note: Do not use dry ice in cooler unit. It can cause severe burns. ALL13000

Air System Motor Assemblies The two speed, 12 volt motor has a red (low speed), orange (high speed), and a black wire (ground), that need to be wired to a three way switch. Like other fine equipment, motor assemblies will work better and longer with reasonable care. Part No.

Description

C/L of clamp measures 2.500" from bottom of holder.

Description

ALL10475..............Kit For 1-1/2" Tubing ALL10480..............Kit For 1-3/4" Tubing ALL10482..............Replacement Bottle

Roll Bar Padding Closed-cell foam does not absorb moisture, but progressively absorbs shock (gets more dense as it is compressed). Offset inside diameter allows easy installation, with thicker padding toward driver. Available in 3 ft. lengths. Part No.

Description

ALL14100..............Black ALL14101..............Red ALL14102..............Blue ALL14103..............Orange ALL14104..............Yellow ALL14105..............Gray ALL14106..............Purple

ALL13001

ALL13000..............Motor Assy. (Pulls Air From Inside Of Car) ALL13001..............Motor Assy. (Pulls Air From Outside Of Car) Replacement Parts

ALL99022..............Top For ALL13001 ALL99023..............Top For ALL13000 ALL13014..............Filter ALL99024..............Squirrel Cage ALL99025..............Motor Assembly

In-line Duct Blower ALL13010 Many uses include cooling brake systems.

Parker Pumper Jr. ALL13002

SFI Roll Bar Padding Manufactured by BSCI, this padding meets SFI 45.1 specs. Available in two sizes, 3/4" thick for 1-1/8" to 1-1/2" O.D. tubing and 1" thick for 1-5/8" to 2" O.D. tubing. Available in black, 3 ft. lengths. Part No.

Description

ALL14110..............1-1/8" To 1-1/2" O.D. Tubing ALL14111..............1-5/8" To 2" O.D. Tubing

Self-contained, 12 volt fan has a reusable filter and an RF connector for easy helmet removal without restriction. A nine volt battery pack may be purchased separately when alternate power source is required. Part No.

Description

ALL13013..............Replacement Filter ALL13015..............9 Volt Battery Pack ALL13016..............Replacement Female With Pigtail

Electric Helmet Breather ALL13012 Self-contained, 12 volt fan has a reusable filter and an RF connector for easy unrestricted helmet removal. A 14" fan wire accepts the 24" pigtail (included). Pigtail has simple red (+) and black (-) wire hook-ups. Part No.

Description

ALL13013..............Replacement Filter

24

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


SB Chevy Power Steering Kits

Aluminum SB Chevy Reduction Pulleys Specifically for short or Corvette water pumps, pulleys work with power steering pump and pulley to provide a ratio within the GM specified RPM range. Race engine RPM differs greatly from street engines. For 30% less water pump speed and reduced weight and inertia, the crankshaft and water pump pulleys are smaller in diameter than standard reduction pulleys. Acceleration capabilities are greatly enhanced.

Kits include all the major components of a power steering system: power steering pump fitted with a lightweight aluminum pulley, power steering tank, tank mounting bracket, and choice of head or block mounted pump bracket. Part No.

Description

Part No.

ALL48240..............Kit With Head Mount Bracket Kit ALL48242..............Kit With Block Mount Bracket Kit Note: For use with short water pumps.

Description

ALL31030..............Crankshaft Pulley (4-3/4" Diameter) ALL31040..............Water Pump Pulley, Short Pump With 5/8" Pilot Hole (6-5/8" Dia.) ALL31050..............Water Pump Pulley, Corvette Pump With 3/4" Pilot Hole (6-5/8" Dia.) Belts

ALL86120..............Belt, Crank to Water Pump, 31.5" ALL86122..............Belt, Crank/Water Pump/Block Mount P/S Pump, 39" ALL86124..............Belt, Crank/Water Pump/Head Mount P/S Pump, 42" Note: Lower pulley will work with either water pump pulley without spacers.

Power Steering Pump With Pulley ALL48250 Steel pump provides smooth, consistent steering. Includes pulley.

Replacement Pulley ALL48251

SB Chevy Power Steering Pump Bracket Kits

ALL48500

ALL48500 mounts pump to left cylinder head; ALL48502 mounts to lower left of engine block. Part No.

Description

ALL48500..............Head Mount Kit ALL48502..............Block Mount Kit Replacement Parts

ALL48502

Related Components

ALL31084..............1:1 Crank Pulley ALL31085..............1:1 Water Pump Pulley ALL86121..............Belt, Crank To Water Pump, 34" ALL86123..............Belt, Crank/Water Pump/Block Mount P/S Pump, 41" ALL86125..............Belt, Crank/Water Pump/Head Mount P/S Pump, 44"

V-Belts ALL31064

Premium quality V-belts are perfect replacements for worn or cracked belts. Part No.

Description

ALL86120..............Belt, 31.5" ALL86121..............Belt, 34" ALL86122..............Belt, 39"

Description

ALL31064..............Water Pump Shims, 1/16", 1/16", 1/8" ALL31066..............Crankshaft Shims, 1/16", 5/64", 1/8"

Description

ALL31080..............Kit For Block Mount Power Steering Pump ALL31082..............Kit For Head Mount Power Steering Pump

Crankshaft And Water Pump Pulley Spacers

Part No.

Double groove ALL31080 aluminum pulley kits include belts and can be used with block or head mount power steering pumps and short water pumps. Water pump pulley has a 5/8" diameter hole. Components are also sold separately. Part No.

ALL48505..............Bracket To Head Bolt Kit ALL48506..............Bracket To Block Bolt Kit ALL48507..............Pump To Bracket Bolt Kit ALL48508..............Adjuster T-Nut Note: For use with short water pumps.

Use shim kits to properly align pulleys. Water pump shims have dual bolt hole pattern to fit most GM and Ford water pumps. Crank pulley spacers are for small block Chevys. Kits include three shims.

Small Block Chevy 1:1 Ratio Pulley Kits

Part No.

Description

ALL86123 .............Belt, 41" ALL86124 .............Belt, 42" ALL86125 .............Belt, 44"

ALL31066

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

25

performance

STEERING & SUSPENSION ACCESSORIES


performance

STEERING & SUSPENSION ACCESSORIES Economy Power Steering Tank With Bracket ALL36130

Power Steering Hose Kits Mount a remote power steering pump to most cars.

Aluminum tank has no internal baffles, and is 8" tall by 3" in diameter with a -6 return fitting on the side and a -10 fitting on the bottom. A mounting bracket for 1-3/4" round tubing is included. Part No.

Part No.

Description

ALL36126 .............Tank Only ALL36124..............Replacement Cap

Power Steering Tank With Bracket ALL36120 Aluminum tank is 8-1/2" tall overall by 3-1/2" in diameter with a -6 return fitting on the side and a -10 fitting on the bottom. A baffle in the return fitting prevents foaming and cavitation. A mounting bracket for 1-3/4" round tubing is included. Part No.

Description

ALL48200..............Front Kit For Cars With A Rack And A Power Steering Pump Mounted On Engine. 16' Of -6 P/S Hose, 8 -6 P/S Fittings (1-45°, 7-Straight), 3' Of -10 Steel Braided Hose, 2 -10 Fittings (1-90°, 1-Straight). ALL48202..............Rear Kit For Cars With A Rack And A Power Steering Pump Mounted On Rear End. 26' of -6 P/S Hose, 8 -6 P/S Fittings (1-45°, 7-Straight), 3' Of -10 Steel Braided Hose, 2 -10 Fittings (1-90°, 1-Straight). ALL48204..............Kit For Early Stock Gear Box (Modified, Camaro, Street Stock). 6' Of -6 P/S Hose, 4 -6 P/S Fittings (1-45°, 1-Straight, 2-90°), 3' Of -10 Steel Braided Hose, 2 -10 Fittings (1-90°, 1-120°) And 2 Fittings For Steering Box. ALL48206..............Universal Short P/S Kit, 5' Of -6 P/S Hose, 4 -6 P/S Fittings (2-45°, 2-90°), 3' Of -10 Hose, 2 -10 Fittings (1-45°, 1-90°). ALL48208..............Universal Long P/S Kit, 12' Of -6 P/S Hose, 4 -6 P/S Fittings (3-90°, 1-Straight), 3' Of -10 Hose, 2 -10 Fittings (1-45°, 1-90°).

Power Steering Fittings

Description

ALL36121..............Tank Only ALL36124..............Replacement Cap ALL48210

Power Steering Tank Brackets

ALL36124

ALL48211

ALL48212

ALL48214

ALL48215

ALL48217

Allstar fittings convert most power steering boxes and racks to -6 fitting. Part No.

Description

O-Ring Style Fittings

ALL48210*............-6 Male To 16mm Fitting With O-Ring ALL48211..............-6 Male To 14mm Fitting With O-Ring ALL48212*............-6 Male To 18mm Fitting With O-Ring ALL36122

ALL36123

ALL36125

Brackets secure 3" or 3-1/2" diameter power steering tanks to round tubing, or flat surface such as firewalls. Tanks fasten to brackets with hose clamps or band clamps (not included). Part No.

Description

ALL36122..............Horizontal Mount (1.75" Tubing) ALL36129..............Vertical Mount (1.75" Tubing) ALL36123*............Horizontal Mount (Alum. Angle) ALL36125..............Flat Mount *Bracket may be clamped to round tubing or bolted to the firewall.

26

Non O-Ring Style Fittings

ALL48214..............-6 Male To 9/16"-18 Fitting ALL48215..............-6 Male To 5/8"-18 Fitting ALL48217..............-6 Male To 11/16"-18 Fitting *These are the two most common fittings when O-rings are needed.

In-Line Oil Cooler ALL52100 Cooler can cool transmission or power steering fluid by 30 degrees. Easily mounts with two 1/4" bolts or tie wraps. Suitable for most classes of circle track cars and even the tow vehicle. Includes -6 fittings. Cooler is 14-1/2" long and 1-3/4" in diameter.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Steering Wheel Disconnects

Collapsible Steering Shaft Assemblies

Aluminum hub mates with the steel coupler which must be welded to a 3/4" steel steering shaft (ALL22190). Steering wheel can then be quickly removed and replaced. Choose button style or 360° flange style release. Part No.

Description

ALL52302..............Button Style, Hex ALL52304..............360° Flange Style, Splined

ALL52302

Replacement Components

ALL52303..............Hex Coupler For ALL52302 ALL52305..............Spline Coupler For ALL52304

ALL52304

Steering Wheel Extensions

When mounted between steering box and firewall, the collapsible shaft will compress in a frontal crash, safely absorbing much of the impact. The heavy wall, 1.140" diameter tubular steel shaft has 3/4"-20 splines on both ends. The durable rubber boot keeps the sliding mechanism free of dirt and debris. Available in two lengths. Part No.

Description

ALL52170..............Long Assembly, 25", Collapses 9" ALL52171..............Short Assembly, 13-1/2", Collapses 5"

Aluminum steering wheel extensions fit between steering wheel and quick disconnect so the distance between driver and steering wheel can be adjusted. Includes fasteners.

Related Components

Part No.

U-Joints

Description

ALL52310.............. 1/2" Thick ALL52312.............. 1" Thick ALL52314.............. 1-1/2" Thick ALL52316.............. 2" Thick

Part No.

Description

Coupler

SWE301-30160 ...3/4"- 20 x 3/4" Smooth SWE401-50621 ...3/4"-20 x 3/4" Smooth SWE401-51021 ...3/4"-20 x 3/4"-48 Sweet Spline SWE401-51121 ...3/4"-20 x 13/16"-36 Chevy Power SWE401-51221 ...3/4"-20 x 3/4"-36 Chevy Manual SWE401-51521 ...3/4"-20 x 13/16"-30 New-Chevy Power

Steering Wheel Pad ALL52320 Black vinyl covered pad fastens to most racing steering wheels with three Velcro straps.

Steering Column Brackets

Rod End Kit ALL52132 Mounts to steering column bracket to hold steering shaft in place. Kit includes one rod end and two steel 3/4" RH jam nuts. Rod end is .757" I.D. (.007 oversized) to slide over a 3/4" O.D. shaft.

Steering Shaft Tubing Stamped-steel brackets are 3-3/16" wide and available in four lengths to mount steering column in any race truck. Adjustment slot fits 3/4" rod end. Part No.

Description

Part No.

ALL52120..............2-1/2" Long ALL52122..............4" Long ALL52124..............8" Long ALL52126..............10" Long

Related Component

ALL52140..............3/4" Shaft Collar

Aluminum, 2-piece shaft collars are used on sway bars and steering column assemblies. Description

ALL52140..............3/4" I.D. ALL52142..............7/8" I.D. ALL52144..............1" I.D.

Description

ALL22190..............5 Ft. ALL22191..............6 Ft.

Shaft Collars

Part No.

Seamless D.O.M. tubing with 3/4" O.D. and a .120" wall thickness is ideal for building assemblies to connect steering wheel to steering box or rack and pinion.

Part No.

Description

ALL52145 ............ 1-1/16" I.D. ALL52146 ............ 1-1/8" I.D. ALL52148 ............ 1-1/4" I.D.

Flange Bearing ALL52130 Self-aligning flange bearing has a .757" I.D. and fits in the firewall to accept the steering shaft. Locking collar. Bearing angles up to 40 degrees.

“Double D” Steering Shafts

3/4" O.D. “Double D” steel shafts have two flats to retain stock steering joints. Two indents must be drilled for set screw retention. Three lengths are available. Part No.

Description

ALL52175..............24" Shaft ALL52176..............30" Shaft ALL52177..............36" Shaft

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

27

performance

STEERING & SUSPENSION ACCESSORIES


performance

STEERING & SUSPENSION ACCESSORIES Pivot Assembly ALL56160

Aluminum Suspension Tubes

Rubber assembly mounts on top of rear end housing (3rd link) and absorbs energy from tires to increase traction.

Replacement Parts Part No.

Description

ALL18262..............3/4"-16 Jam Nut ALL18440..............Washer ALL56161..............Bushing

Gold anodized tubes have a machined wrench flat on one end for ease of adjustment. Tubes have .156" thick walls and are available in two diameters and a variety of lengths. The 56400 Series tubes are 7/8" in diameter and both ends are tapped 5/8", one RH and one LH. The 56500 Series tubes are 1" in diameter and both ends are tapped 3/4", one RH and one LH.

Rubber Bushings Bushings absorb torque from rear end and may also be used in other applications. Part No.

Description

ALL56161..............3" O.D., 1-1/2" Tall, 5/16" Shoulder ALL56162..............3" O.D., 1-1/2" Tall, No Shoulder

ALL56161

ALL56162

Ford 9" Upper Link Brackets Use Ford 9" housing brackets with ALL56160 pivot assembly and ALL56163 adapter. Brackets have 1" diameter holes. Part No.

Description

ALL60160..............Weld-On (2 Required, Sold Individually) ALL60161..............Weld-On (One Required) ALL60166..............3/4" Dia. Holes, Weld-On (Sold in Pairs)

Length

5/8" Thread 56400 Series

3/4" Thread 56500 Series

Length

5/8" Thread 56400 Series

3/4" Thread 56500 Series

5" 6" 7" 8" 9" 10" 11" 12" 13" 14" 15" 16" 17"

ALL56405 ALL56406 ALL56407 ALL56408 ALL56409 ALL56410 ALL56411 ALL56412 ALL56413 ALL56414 ALL56415 ALL56416 ALL56417

ALL56505 ALL56506 ALL56507 ALL56508 ALL56509 ALL56510 ALL56511 ALL56512 ALL56513 ALL56514 ALL56515 ALL56516 ALL56517

18" 19" 20" 21" 22" 23" 24" 25" 26" 27" 28" 29" 30"

ALL56418 ALL56419 ALL56420 ALL56421 ALL56422 – – – – – – – –

ALL56518 ALL56519 ALL56520 ALL56521 ALL56522 ALL56523 ALL56524 ALL56525 ALL56526 ALL56527 ALL56528 ALL56529 ALL56530

Unthreaded 72" Suspension Tubes Part No.

Description

ALL56472..............72" Long, 7/8" Dia. x .156" Wall For 5/8" Rod Ends ALL56572..............72" Long, 1" Dia. x .156" Wall For 3/4" Rod Ends

ALL60160

ALL60161

ALL60164

ALL60166

Threaded Tubing Ends Fine threaded steel tubing ends are ideal for building custom length suspension tubes. Available in RH and LH threads. Thread Size

Tubing Size

RH Part No.

LH Part No.

10-32 5/16"-24 3/8"-24 3/8"-24 1/2"-20 1/2"-20 1/2"-20 1/2"-20 5/8"-18 5/8"-18 5/8"-18 5/8"-18 3/4"-16 3/4"-16 3/4"-16

3/8" x .058" 1/2" x .058" 5/8" x.058" 3/4" x .058" 7/8" x .058" 1" x .058" 1" x .065" 1-1/8" x .058" 1" x .058" 1" x .095" 1-1/4" x .095" 1-1/4" x .120" 1-1/4" x .095" 1-1/4" x .120" 1-3/8" x .095"

ALL22500 ALL22504 ALL22508 ALL22512 ALL22518 ALL22522 ALL22526 ALL22530 ALL22534 ALL22538 ALL 22542 ALL22546 ALL22550 ALL22554 ALL22558

– – ALL22509 ALL22513 ALL22519 ALL22523 ALL22527 ALL22531 ALL22535 ALL22539 ALL22543 ALL22547 ALL22551 ALL22555 ALL22559

Aluminum Hex Suspension Tubes Used in steering and suspension systems, hex tubes are easy to install and adjust. Available in 7/8" hex with 5/8" threads tapped RH and LH, and 1-1/8" hex with 3/4" threads tapped RH and LH, tubes are black anodized for appearance and corrosion resistance. Length

5/8" Thread 56600 Series

3/4" Thread 56700 Series

7" 8" 9" 10" 11" 12" 13" 14" 15" 16" 17" 18" 19" 20" 21" 22"

ALL56607 ALL56608 ALL56609 ALL56610 ALL56611 ALL56612 ALL56613 ALL56614 ALL56615 ALL56616 ALL56617 ALL56618 ALL56619 ALL56620 ALL56621 ALL56622

ALL56707 ALL56708 ALL56709 ALL56710 ALL56711 ALL56712 ALL56713 ALL56714 ALL56715 ALL56716 ALL56717 ALL56718 ALL56719 ALL56720 ALL56721 ALL56722

Length

5/8" Thread 56600 Series

3/4" Thread 56700 Series

23" 24" 25" 26" 27" 28" 29" 30" 32" 34" 36" 38" 40" 42" 44"

– – – – – – – – – – – – – – –

ALL56723 ALL56724 ALL56725 ALL56726 ALL56727 ALL56728 ALL56729 ALL56730 ALL56732 ALL56734 ALL56736 ALL56738 ALL56740 ALL56742 ALL56744

Unthreaded 72" Length Hex Suspension Tubes Part No.

Description

ALL56672..............72" x 7/8" Hex. For 5/8" Rod Ends ALL56772..............72" x 1-1/8" Hex. For 3/4" Rod Ends

28

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Cast Aluminum Valve Covers ALL26139 Small block Chevy polished tall aluminum valve covers are sold in pairs. One cover has two 1-3/8" baffled tubes. Order breathers separately.

Steel Valve Covers Small block Chevy steel valve covers are sold in pairs. One cover has two 1-1/2" baffled breather tubes both feature reinforced rails. Order breathers separately. Part No.

Description

ALL26140..............Zinc Plated, Tubes Welded In ALL26143..............Unpainted, Tubes Pressed In ALL26145..............Zinc Plated, Tubes Pressed In ALL26147..............Black Painted, Tubes Pressed In

Breathers Shielded or non-shielded clampon breathers will fit valve cover tubes. Part No.

SB Ford 302/351 Replacement Timing Covers New cast aluminum stock replacement timing covers are available in several styles. Part No.

Description

ALL90014..............Early Style, With Fuel Pump Mounting Boss And Dipstick Tube Opening ALL90015..............’95 Mustang/’96-01 Explorer/ Mountaineer Rev. Rotation With Short Water Pump ALL90016..............’83-89 Cars/Trucks/SUV’s, With ECC Sensor Mount And Fuel Pump Boss ALL90017..............’85-94 Mustang With EFI Rev. Rotation ALL90018..............’87-96 Trucks

Timing Pointers Black anodized, billet aluminum timing pointers are adjustable to precise timing increments. Part No.

Description

ALL90023..............SB Chevy 6-1/4" Dia. Fluidampr Balancers ALL90020..............SB Chevy 6-3/8" Dia. ATI Balancers ALL90021..............SB Chevy 7" Dia. ATI Balancers ALL90024..............SB Chevy 7-1/4" Dia. Fluidampr Balancers ALL90025..............SB Chevy 8" Dia. Fluidampr Balancers ALL90026..............BB Chevy 6-1/4" Dia. Fluidampr Balancers ALL90022..............BB Chevy 7" Dia. ATI Balancers ALL90027..............BB Chevy 8" Dia. Fluidampr Balancers ALL90034..............SB Ford SVO Block B, 11 O’clock Tab Position, 3/8" Bolt ALL90035..............SB Ford SVO Block C, 10 O’clock Tab Position, 3/8" Bolt ALL90036..............SB Ford SVO Stock Block B, 11 O’clock Tab Position, 5/16" Bolt ALL90037..............SB Ford SVO Stock Block C, 10 O’clock Tab Position, 5/16" Bolt

Description

ALL36202..............Non-Shielded Breather, 1-1/2" ALL36203..............Shielded Breather, 1-1/2" ALL36204..............Non-Shielded Breather, 1-3/8" ALL36205..............Shielded Breather, 1-3/8"

Aluminum Gear Drive ALL90000

SB Chevy Timing Cover ALL90010 Excellent replacement for distorted, leaky timing cover. Fits small block Chevrolets and has a reinforced cam thrust area and gasket flange. Attractive silver iridite finish.

SB Chevy Timing Cover (BB Chevy Seal)

Accurate valve timing is assured with the Allstar aluminum gear drive for the small block Chevrolet V8. Plate with built-in idler gear fits under most two-piece timing covers and includes crankshaft and cam gears, needle bearing sets for the front and rear of cam gear, four camshaft dowel pins, and five camshaft gear offset bushings for precise timing adjustments. Gear drive is commonly used with KSEKSD1002 cover, will fit under most stock-type covers such as ALL90010 with slight modifications.

ALL90012

Replacement Components

Black cover fits small block Chevy and is used with a big block seal.

ALL90001..............Cam Gear New! ALL90002..............Crank Gear New! ALL90003..............Idler Gear New! ALL90007..............Thrust Washer Set New!

Part No.

Description

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

29

performance

ENGINE ACCESSORIES


performance

ENGINE ACCESSORIES Cam Button Spacers

Chevy HEI Performance Distributors

Buttons limit lateral movement of the camshaft in engines without cam thrust plates and reduce friction for “free” horsepower. Machining of the cam sprocket may be required. ALL90054 ALL90050 ALL90052

Distributors have high output coils and adjustable vacuum advances, perfect for upgrading stock HEI distributors for higher RPM. Fit small and big block Chevy (except 348 and 409). Housings are CNC-machined 6061-T6 aluminum with an upper support bearing to provide accurate timing at higher RPM. Include snap-on spark plug wire retainer and instructions.

Part No.

Description

ALL90050..............SB Chevy Aluminum, Early With Flat Timing Cover ALL90052..............SB Chevy Aluminum, Late With Indented Cover ALL90054..............SB Chevy Roller Bearing ALL90053..............BB Chevy Aluminum ALL90055..............BB Chevy Roller

Chevy V8 Camshaft Degree Bushing Kit

Part No.

Description

ALL81200..............HEI Distributor With Coil And Red Cap ALL81202..............HEI Distributor With Coil And Black Cap Replacement Components

ALL81204..............HEI Distributor Cap, Red ALL81205..............HEI Distributor Cap, Black ALL81206..............HEI Distributor Rotor ALL81207..............HEI Coil ALL81208..............HEI Module

ALL90062 Use machined, color-coded degree bushings to adjust valve timing when degreeing the cam. Includes one of each bushing (0°, 2°, 4°, 6° and 8°).

Chevy Cam Lock Plate And Bolts ALL90060 Kit includes camshaft retaining plate with locking tabs and three alloy steel, 150,000 PSI bolts. Fits all small and big block Chevys.

Chevy Performance Distributor With Mechanical Advance ALL81220 The mechanical advance distributor works with an aftermarket control box and an external coil. Fits small and big block Chevy (except 348 and 409). Housing is CNC-machined 6061-T6 aluminum with an upper support bearing to provide accurate timing at higher RPM. Distributor includes advance springs, advance stop bushings, manifold gasket, O-rings, spark plug wire retainer cap with screws and instructions. Part No.

HEI Advance Curve Kit ALL81300 Advance kit fits all ’74-79 GM HEI distributors except those that are computer controlled. Includes two weights, center plate, three sets of color-coded springs, two pairs of nylon bushings and complete instructions.

Description

Replacement Components

ALL81224..............Distributor Cap ALL81225..............Distributor Rotor

Chevy Performance Distributor Ready-To-Run With Vacuum Advance ALL81222 The ready-to-run unit has a vacuum advance with an electronic ignition and the size of a point style distributor. Perfect for early GM cars without clearance for an HEI unit. Distributor can use any external stock or performance coil and fits small and big block Chevy (except 348 and 409). Housing is CNC-machined 6061-T6 aluminum with an upper support bearing to provide accurate timing at higher RPM. Distributor includes vacuum advance lock out, three-pin wire harness, advance springs, advance stop bushings, manifold gasket, O-rings, spark plug wire retainer cap with screws and instructions. Part No.

Description

Replacement Components

ALL81224..............Distributor Cap ALL81225..............Distributor Rotor

30

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Precision Bronze Distributor Gears

6 Qt. Claimer Oil Pans And Pick-Up

Gears have .005" oversized contact area to reduce backlash for more accurate timing. CNC-machined from 630 bronze for longer life and compatibility with roller camshafts. Thrust spacer is integral with gear, eliminating additional spacers. Each gear is drilled and tapped for set screws and drilled for a 3/16" roll pin. Set screw and roll pin are included.

Small block Chevy pans have a 6 quart capacity and are 7" deep. Two swinging trap doors and a built in baffle provide consistent oil control. Stock starter may be used. Part No.

ALL26132

Description

ALL81312..............0.491" Dia. Shaft ALL81313..............0.500" Dia. Shaft

ALL26132..............L.H. (Driver’s Side) Dipstick ALL26133..............R.H. (Passenger’s Side) Dipstick ALL26134..............Pick-Up For Use With SB Chevy 4-Bolt Oil Pump Cover

Bronze Distributor Gears

SB Chevy Rear Main Seal Adapters

When installing a steel billet roller camshaft, a bronze distributor gear must be installed in place of the original cast iron gear. Gears made of premium aluminum bronze offer high strength to withstand the stresses created by high pressure oil pumps. Roll pins are included.

May be used to convert one-piece rear main seal on 1986 and newer Chevy small blocks to the old style, two-piece rear ALL26125 ALL26126 ALL26127 seal in order to install a pre-’86 crankshaft. Billet aluminum adapters include hardware. Alignment tool is available for quick, easy adapter installation.

Part No.

Part No.

Description

Description

ALL81310..............0.491" Dia. Shaft ALL81311..............0.500" Dia. Shaft ALL81315..............Replacement Distributor Gear Roll Pin

Part No.

Iron Distributor Gears A direct replacement for Allstar distributor gears. Part No.

Description

ALL26125..............Seal Adapter For Early (Pre-’86) Oil Pan ALL26126..............Seal Adapter For Late (’87-Up) Oil Pan ALL26127..............Alignment Tool

SB Chevy Oil Filter Adapter

Description

ALL81308..............0.491" Dia. Shaft ALL81309..............0.500" Dia. Shaft

ALL92000

Chevy Distributor Hold Down

Part No.

Aluminum hold-down keeps distributor secured at high RPM. Fits small or big block Chevy V8 and 90° Chevy V6. Stainless steel stud, nut and washer are included. Choose blue, clear or red anodized.

Rod Guide Tool ALL96480

Stock replacement adapter bolts to the engine block and accepts oil filter. Description

ALL92001..............Two Fasteners For ALL92000

Description

Blue

Clear

Red

Chevy Distributor Hold Down

ALL27502

ALL27503

ALL27504

Titanium Distributor Hold Down ALL27506 Solid titanium hold down is very strong and only weighs 30 grams. It will keep distributor locked in place to ensure accurate timing and fits small and big block Chevy engines. Mounting hardware not included.

Chevy Distributor/Magneto Hold Down ALL27500 Aluminum hold down fits most aftermarket distributors and magnetos. An Allen head bolt prevents distributor from turning in the clamp so distributor can be removed and reinstalled without resetting the timing. Fits all Chevy V8 except 348-409. Will not fit Mallory magnetos.

Plastic tool slips over 3/8" or 7/16" rod bolts to aid piston installation and eliminates rod bolts hitting the crank. A must for any engine builder’s toolbox. Part No.

Description

ALL96481..............Rod Guide Tool Extensions 4.5", 1-Pair

Intake Bolt Kit ALL87010 Grade 8, 12-point flange gold-finished bolts are 3/8" x 1-1/8" long to fit small block Chevys and Chrysler “A” and “B” engines where clearance is insufficient for standard hex head bolts. Sets of 12 include heat treated washers.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

31

performance

ENGINE ACCESSORIES


performance

ENGINE ACCESSORIES Bearing Spacer Kit ALL26124

Polished Round Dry Sump Tanks

Use main bearing spacers to install Chevy 350 crank in a 400 block.

Linear Engine Oil Coolers Finned aluminum coolers have 3/4"NPT ends and T-slots for easy mounting. Part No.

Length

ALL30142..............3 Ft. ALL30143..............4 Ft. ALL30144..............5 Ft.

Oil Inlet Fittings Aluminum fittings in -10 or -12 ease oil line installation. Part No.

Description

ALL90043..............-10 To 1/2"NPT, 3.00" Long ALL90044..............-12 To 1/2"NPT, 3.00" Long ALL90046..............-10 To 1/2"NPT, 4.00" Long ALL90048..............-10 To 3/8"NPT, 3.00" Long

ALL90048

Aluminum tanks are available in four sizes and capacities. All are 6" in diameter with a removable top for thorough cleaning. Tanks have two 3/8"NPT tapped outlets on top cover, two 3/4"NPT ports near the top, and one 3/4"NPT port located at the bottom. Polished to a brilliant finish, tanks are ideal for use on any dry sump-equipped vehicle. Mounting bracket must be purchased separately. Three internal baffles are drilled and fastened to the lid for easy removal and cleaning. Part No.

Description

ALL36095..............16" Tall, 7-1/2 Qts. ALL36096..............18" Tall, 8-1/2 Qts. ALL36097..............20" Tall, 9 Qts. ALL36098..............22" Tall, 10 Qts. ALL99075..............Replacement O-Ring

ALL36098

Ported Oil Inlet Fitting ALL90045 Aluminum -12 x 1/2"NPT fitting is 3.500" long with two 1/8"NPT ports for plumbing valve spring oilers.

Inline Oil Temperature Tees Adapt a probe for oil temp gauge in the pump to tank return. All tees have 1/2"NPT threads and 1/4" mounting holes. Part No.

ALL36094 Mounting with front motor plate on left side of engine, bracket angles outward slightly for extra clearance, and its non-slip material protects the tank. Mounting straps and tank protectors are included.

Description

ALL90040..............-10 ALL90041..............-12 ALL90042..............-16

Polished Rectangular Dry Sump Tank ALL36100 Polished rectangular aluminum tank is completely washable. With removable top, three -12AN male fittings (two located near the top, one near the bottom), and two 3/8"NPT female outlets (one top, one bottom), it’s perfect for use on trucks, or even on dynamometers. Internally baffled, the tank is 5" deep x 7" wide x 19" tall with an 11 quart capacity. Three internal baffles are drilled and fastened to the lid for easy removal and cleaning.

Breather Tanks Aluminum breather tanks include mounting bracket, 1-1/2" breather with washable element, drain, and one or two 3/8"NPT bung(s). ALL36109 can vent two systems. Ideal for dry sumps and rear ends. Part No.

Round Dry Sump Tank Mounting Kit

Description

ALL36108..............Tank With One Bung ALL36109..............Tank With Two Bungs Replacement Parts

ALL99030..............1/4" Petcock ALL99031..............3/8"NPT To 1/4"NPT Fitting ALL36202..............1-1/2" Washable Breather

ALL36109 ALL36108

Mini Breather Tanks Small capacity, spun aluminum tank will vent dry sump tank, transmission or rear end. Tank has a 1/4"NPT bung on bottom and a clamp style bracket for mounting to chassis tubing. Part No.

Description

ALL36140..............Clamps To 1-1/2" Dia. Tubing ALL36141..............Clamps To 1-3/4" Dia. Tubing

32

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Flexplates

Chevy Motor Mounts

Stock replacement and SFI-approved flexplates are available for small and big block Chevy engines. Gold iridite plated, SFI-approved plates meet 29.1 specs., are .035" thicker than stock and have dual converter bolt patterns. SFI flexplates have ring gears welded on both sides.

ALL38108

Front Motor Mounts Available in centered or 1", 2" or 3-3/8" offsets. Part No.

Stock Replacement Part No.

SFI Part No.

Description

ALL26835 ALL26805

ALL26830 ALL26800

ALL26815

ALL26810

ALL26825

ALL26820

153-Tooth 168-Tooth SB Chevy 400, 168-Tooth BB Chevy 454, 168-Tooth

ALL38109

Description

ALL38100..............Centered, Each ALL38108..............1" Offset, Pair ALL38109..............2" Offset, Pair ALL38110 .............3-3/8" Offset, Pair ALL38110

Rear Motor Mounts Available with a tab welded on, or in kit form so tab can be welded on at any location or angle. Part No.

ALL38101

Description

ALL38102

ALL38101..............Welded, Each ALL38102..............Unwelded Universal Kit, Each

Torque Converters Ideal for mild performance, economical converters are completely remanufactured with new pump drive hubs and thrust washers. Exact stall speeds will vary depending upon displacement, torque and vehicle weight.

Chevy Motor Mount Pads ALL38090

Part No.

Description

Stall Speed

ALL26900 ALL26902 ALL26904 ALL26906 ALL26908 ALL26910 ALL26912 ALL26920 ALL26922 ALL26930

TH-350/400 10" Converter, 10-3/4" B.C. TH-350/400 10" Converter, 10-3/4" B.C. TH-350/400 10" Converter, 10-3/4" B.C. TH-350/400 11" Converter, 10-3/4" B.C. TH-350/400 12" Converter, 10-3/4" B.C. GM 700-R4 12" Lock-Up, ’84-Up (30-Spline) GM 700-R4 12" Lock-Up, ’84-Up (30-Spline) Chrysler TF-727 10", 10" B.C., ’67-Up (24-Spline) Chrysler TF-727 11", 10" B.C., ’67-Up (24-Spline) C-6 Ford 11", 11-7/16" B.C.

2700-3000 3200-3500 3500+ 2200-2600 2000-2200 2000-2400 2400-2800 2800-3200 2000-2400 2400

Install between crankshaft flange and flexplate to use a Chevy 350 flexplate or flywheel with a 400 crank.

For use with motor mounts, adapters or mid-plates where distance between the engine and bellhousing is increased. Roller bearing reduces parasitic drag, prevents premature bearing failure and maintains alignment of the clutch disc to flywheel. Description

ALL26112

Chevy Solid Motor Mount ALL38080 Solid motor mount is 1/4" thick steel and replaces stock Chevy rubber mount to eliminate torque loss and prevent engine movement. Sold individually.

GM Motor Mount ALL38114 Replacement stock mount for most GM engines. Mount bolts to chassis. Fits: ’70-88 Monte Carlo, ’70-87 El Camino, ’71-92 Camaro, ’77-87 Regal, ’70-73 Chevelle, ’73-87 Cutlass, ’74-83 Malibu, ’70-79 Nova, ’70-85 Impala, ’70-95 Corvette

GM Motor Mount ALL38115

GM Motor Mount Kit ALL38082

Long Pilot Bushings

ALL26112..............Extra Long Bronze ALL26114..............Extra Long Roller ALL26115..............Pilot Bushing Driver, Aids Bushing Installation

Traditionally used as shims to gain extra oil pan or header clearance and for building custom motor mounts or homemade engine stands. Sold in pairs.

Replacement rubber mount for Allstar S-10 V8 conversion kit.

Balancing Plate ALL26120

Part No.

ALL38100

ALL26114

Steel mounts for GM metric chassis bolt to crossmember and accept Allstar ALL38100. A “captured” 1/2"-13 nut eases engine installation.

Ford Motor Mounts Steel mounts now fit newer and original 302-351W blocks. Sold in pairs. Part No.

Description

ALL38112

ALL38112..............Rear Motor Mount ALL38113..............Front Motor Mount

ALL38113

New Design!

Ford Motor Mount ALL38116 Replacement rubber mount for Allstar Ford Ranger V8 conversion kit.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

33

performance

ENGINE ACCESSORIES


performance

ENGINE ACCESSORIES Solid Transmission Mount

Ford V8 Engine Conversion Kit ALL38200

ALL38070 Solid 3/16" steel mount fits most TH350, TH400, Powerglide, and all Borg Warner, Muncie, and Chrysler 4-speed transmissions. Eliminates twisting, flex, and distortion. Not recommended for use with rubber engine mounts.

Transmission Mount Bracket ALL38072 May be welded to chassis to support manual or automatic transmissions. Steel bracket is 1/8" thick with 1" x 7/16" slots for mounting bolts.

SB Chevy “Ram Horn” Exhaust Manifolds ALL34200

Install a 289 or 302 V8 with C-4 transmission in place of original 4 or 6 cylinder engine in most 1982-04 2WD Ranger pick-ups.

“Ram Horn” manifolds have increased exhaust flow over traditional manifolds and added steering shaft clearance. Ideal for classes requiring cast iron exhaust manifolds. Sold in pairs.

Kit Includes: • Engine Mount Adapter Set • Filter Adapter • Radiator • Headers

O2 Sensor Plug And Bung

Chevrolet/GM V8 Engine Conversion Kits

Hard-to-find O2 sensor fittings work in a variety of uses. Part No.

• Oil Pump Pick-Up Tube • Engine Mount • Oil Pan • Fuel Pump

Description

ALL34150..............18mm Sensor Plug ALL34152..............18mm Sensor Bung-Angled ALL34153..............18mm Sensor Bung-Straight ALL34150

ALL34152

ALL34153

Header Tab Kit ALL60040 Weld to headers to hold slip-on collectors in place. Kit includes one pair of tabs and one 1/4" bolt and hex nut. Tabs are .085" thick, 2-1/2" long (when combined are 4" long) and 1" tall.

Dual Chamber Mufflers Mufflers are welded to prevent blowout and aluminized to resist corrosion. Swaged inlet and outlet smooth the tranALL34170 sition to maximize exhaust flow. Dual chambers reduce decibel level for a deep mellow tone. Case is 4" H x 9-3/4" W x 14" L (20" overall length). Part No.

Description

ALL34170.......2.25" Offset In/Center Out ALL34173.......2.25" Offset In/Offset Out

Part No.

Description

ALL34174 .........2.50" Offset In/Offset Out ALL34175 .........3" Center In/Dual 2.25" Out

Install a V8 in place of original 4 or 6 cylinder engine. Chevrolet/GMC Kits adapt a 265-400 small block Chevrolet/Turbo 350 combination to most 1982-03 S10 or S15 2 or 4WD pick-ups or Blazers.

ALL38250 Conversion Kit 2WD Kit Includes: • Engine Mount Set • Engine Mounts

• Headers

ALL38251 Conversion Kit 2WD Kit Includes:

Auger-Style Mufflers Fits 3-1/2" diameter exhaust collector. Part No.

Description

ALL34160..............12" Long (4" O.D. Body) ALL34162..............16-1/2" Long (4" O.D. Body)

Crankcase Evacuation System ALL34145 Reduce crankcase pressure for optimum piston ring seal, fewer oil leaks and better engine performance. System includes two of each: chrome plated push-in breathers, check valves, weld-in 3.5" long threaded pipe adapters, rubber breather grommets and four hose clamps. Evacuation hoses not included.

34

• Engine Mount Set • Engine Mount

• Headers • Radiator

ALL38260 Conversion Kit 4WD (Pre 1986 Two-Piece Rear Seal) Kit Includes: • • • • •

Transfer Case Adapter Engine Mount Set Headers Radiator Remote Filter Mount Kit

• • • •

Oil Pan Oil Pump Pick-up Oil Pump Dipstick Tube

ALL38262 Conversion Kit 4WD (’86 Newer Block With One-Piece Rear Seal) Kit Includes: • • • • •

Transfer Case Adapter Engine Mount Set Headers Radiator Remote Filter Mount Kit

• • • •

Oil Pan Oil Pump Pick-up Oil Pump Dipstick Tube

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Aluminum Radiators Excellent quality at an affordable price. Filler necks are machined, not stamped, and water tanks are furnace brazed, not epoxied, eliminating two prime sources of leakage! The lightweight 1" tubes, arranged in two rows, offer outstanding cooling in Ford and GM powered race cars, offroad vehicles and street machines. Standard 1-1/2" inlets and 1-3/4" outlets have beaded hose fittings. Radiators are available in 22", 24", 26", 28", and 31" overall widths (including tanks) to fit a wide variety of chassis and engine compartment configurations.

GM

Ford

Part No.

Description

ALL30010...................19" x 22" ALL30011...................19" x 24" ALL30012...................19" x 26" ALL30014...................19" x 28" ALL30016...................19" x 31" ALL30042...................16" x 28"

Part No.

Description

ALL30020 ................19" x 22" ALL30021 ................19" x 24" ALL30022 ................19" x 26" ALL30024 ................19" x 28" ALL30026 ................19" x 31" ALL30043 ................16" x 28"

Chevy Dual Pass Radiators Water is circulated across the top half of the radiator, then back across the bottom half for 15-20% more heat dissipation. Radiators include furnace brazed tanks, two rows of 1" tubes, billet machined filler neck with overflow and a standard 1-3/4" outlet. Radiators have universal inlets for 1-1/2" standard hose and -16 or -20AN fittings (fittings sold separately). Available in 26" and 28" overall widths (including tanks). Part No.

Radiator Shaker Screen ALL30160 Universal shaker screen mounts in front of the radiator and includes black powder coated aluminum frame, screen, 1/2" x 32" cross rod, springs and retaining clips. Frame dimensions are 17" tall and 25" wide.

High Pressure Radiator Caps Higher pressure raises the boiling point of coolant, reducing the risk of overheating. Part No.

Description

ALL30124..............16 PSI Small Diameter Stant ALL30125..............19-21 PSI Small Diameter Stant ALL30127..............22-24 PSI Hexagon Cap Without Lever ALL30128..............28-32 PSI Stant Cap Without Lever ALL30129..............29-31 PSI Hexagon Cap Without Lever ALL30130..............19-21 PSI Stant Cap With Lever ALL30131..............21-25 PSI Stant Cap With Lever ALL30134..............19-21 PSI Stant Cap Without Lever ALL30135..............21-25 PSI Stant Cap Without Lever ALL30136*............22-24 PSI Hexagon Stant Cap Without Lever ALL30137*............22-24 PSI Octagon Stant Cap Without Lever *Caps have two rubber seals for use with recovery systems.

ALL30130

ALL30124

ALL30125

Radiator Hoses Green stripe, two-ply coolant hose is flexible and adapts to a variety of applications. Abrasion resistant cover. Part No.

Description

ALL30035..............19" x 26" Radiator ALL30036..............19" x 28" Radiator

Description

Part No.

Description

1-1/2" Dia. Upper Hose

1-3/4" Dia. Lower Hose

ALL30200............12" Long ALL30202............14" Long ALL30204............15-1/2" Long ALL30206............17" Long ALL30208............20" Long ALL30210............22" Long ALL30212............25" Long

ALL30220..................11" Long ALL30222..................13-1/2" Long ALL30224..................16-1/2" Long ALL30226..................19" Long ALL30228..................23-1/2" Long

Hose Clamps

Inlet Fittings*

ALL18330............1/2" OD, 2-Pack ALL18332............1" OD, 2-Pack ALL18334............2" OD, 2-Pack ALL18336............2-1/4" OD, 2-Pack

ALL30038..............1-1/2" Fitting (Std. Radiator Hose) ALL30039..............-16AN Fitting ALL30040..............-20AN Fitting *O-ring is included with each fitting.

ALL18338..................2-1/2" OD, 2-Pack ALL18340..................3-1/2" OD, 2-Pack ALL18342..................4-1/2" OD, 2-Pack

Billet Fan Spacers ALL30038

Upper Radiator Support ALL30120 Universal support can be used with any chassis. Hole is 3/16".

ALL30039

ALL30040

Includes 5/16"-24 bolts and reducer bushing for 5/8" or 3/4" water pump shafts. Part No.

Description

ALL30080..............1/2" ALL30082..............1" ALL30084..............1-1/2" ALL30086..............2" ALL30088..............2-1/2" ALL30090..............3" ALL99027..............Replacement Reducer Bushing

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

35

performance

ENGINE COOLING ACCESSORIES


performance

ENGINE COOLING ACCESSORIES 4-Blade Steel Fans

2-Speed Dual Electric Fan Kits

Steel high RPM fans are available in 15", 18" or 19". All have a universal bolt pattern with a 5/8" pilot hole. Riveted reinforcement plate adds strength and high pitch 32 degree blades increase airflow. Painted black to resist corrosion. Part No.

Description

ALL30104..............15" Dia. ALL30105..............18" Dia. ALL30101..............19" Dia.

6-Blade Fans Heavy-duty, 6-blade fans, in aluminum or steel, can move the volume of air needed to keep race engines cool. Universal bolt pattern with a 5/8" Pilot hole. Part No.

Description

ALL30096..............15" Dia. Aluminum ALL30097..............17" Dia. Aluminum ALL30102..............15" Dia. Steel ALL30103..............17" Dia. Steel

Manually control fan speed to meet the cooling needs of the vehicle. Large size assures nearly complete coverage of radiator for very efficient cooling under the most severe conditions. A slim 3-5/8" deep, the fan unit is 26-1/2" wide by 15-1/4" tall and has a maximum air flow of 2,340 CFM. Fans are available with a universal wiring harness. Part No.

Description

ALL30067..............2-Speed Dual Fan ALL30068..............2-Speed Dual Fan Kit With Universal Wiring Harness ALL99091

Replacement Components

ALL99090..............Universal Wiring Harness Only

ALL99090

Molded Nylon Fans Lightweight, 6-blade fans are economical and very durable. Universal bolt pattern with a 5/8" pilot hole. Part No.

Description

ALL30091..............14" Dia. ALL30092..............15" Dia. ALL30093..............16" Dia. ALL30094..............17" Dia. ALL30095..............18" Dia.

Curved Blade Electric Fans Electric fans require very little amperage and are set up as “puller” units, to be mounted behind the radiator. By flipping blades, reversing wires, and mounting in front of radiator, fans will operate in “pusher” configuration. Each unit includes a mounting kit. Part No.

Fan Shrouds Fan will pull more air through the radiator for increased cooling. Aluminum and impact-resistant plastic shrouds fit fans up to 17" dia. Part No.

Description

ALL30074

ALL30070..............10" Dia., 750 CFM @ 9.4 Amps, 10.87" W. x 10.36" H. x 3.44" D. ALL30072..............11" Dia., 1080 CFM @ 12.3 Amps, 12.4" W. x 11.75" H. x 3.51" D. ALL30074..............13" Dia., 1350 CFM @ 9.2 Amps, 14.5" W. x 13.85" H. x 3.75" D. ALL30076..............16" Dia., 1820 CFM @ 17.1 Amps, 16.75" W. x 15.75" H. x 4.23" D. ALL30085..............Replacement Mounting Kit

Description

ALL30107..............18-1/4" W. x 19" H. x 9-3/4" D., Fits 22" Allstar Radiator ALL30109..............21-1/4" W. x 19" H. x 9-3/4" D., Fits 26" Allstar Radiator ALL30110..............22-1/2" W. x 19" H. x 9-3/4" D., Fits 28" Allstar Radiator ALL30115..............26" W. x 19" H. x 9-3/4" D., Fits 31" Allstar Radiator ALL30106..............22" W. x 19" H. x 11" D., Fits 26" Griffin Radiator ALL30108..............23" W. x 19" H. x 11" D., Fits 28" Griffin Radiator ALL30111..............26" W. x 19" H. x 11" D., Fits 31" Griffin Radiator ALL30114..............22" W. x 19" H. x 11" D., Fits 26" Howe Radiator ALL30116..............23" W. x 19" H. x 11" D., Fits 28" Howe Radiator ALL30118..............26" W. x 19" H. x 11" D., Fits 31" Howe Radiator

36

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Aluminum SB Chevy Water Pumps

Water Pump Spacer Kits Kits provide additional clearance needed for belt or gear drive timing systems. Gaskets are included.

Short, lightweight pumps dissipate heat more rapidly and equalize water flow to both sides of the engine. Billet steel fan hub and bosses for external water lines are included. Part No.

Part No.

Specifically for short or Corvette water pumps, pulleys work with power steering pump and pulley to provide a ratio within the GM specified RPM range. Race engine RPM differs greatly from street engines. For 30% less water pump speed and reduced weight and inertia, the crankshaft and water pump pulleys are smaller in diameter than standard reduction pulleys. Acceleration capabilities are greatly enhanced. Description

ALL31030..............Crankshaft Pulley (4-3/4" Diameter) ALL31040..............Water Pump Pulley, Short Pump With 5/8" Pilot Hole (6-5/8" Dia.) ALL31050..............Water Pump Pulley, Corvette Pump With 3/4" Pilot Hole (6-5/8" Dia.) Belts

ALL86120..............Belt, Crank To Water Pump, 31.5" ALL86122..............Belt, Crank/Water Pump/Block Mount P/S Pump, 39" ALL86124..............Belt, Crank/Water Pump/Head Mount P/S Pump, 42" Note: Lower pulley will work with either water pump pulley without spacers.

Small Block Chevy 1:1 Ratio Pulley Kits Double groove aluminum pulley kits include belts and can be used with block or head mount power steering pumps and short water pumps. Water pump pulley has a 5/8" diameter hole. Components are also sold separately.

Pulley Shim Kits

ALL31066

Aluminum SB Chevy Reduction Pulleys

Part No.

ALL31072

Description

ALL31100*............SB Chevy Pre-1969, 5/8" Shaft Dia. ALL31105..............SB Chevy 1971-82 Corvette, 3/4" Shaft Dia. *This pump is not recommended for use with mechanical fans over 5000 RPM. Above this RPM, use the ALL31105 pump with a 3/4" bearing. Note: Water pumps may need to be clearanced for use with 8" dampers.

Part No.

Description

ALL31070..............1/8" Spacer Kit ALL31071..............1/4" Spacer Kit ALL31072..............3/8" Spacer Kit ALL31073..............1/2" Spacer Kit

ALL31064

Use shim kits to properly align pulleys. Water pump shims have dual bolt hole pattern to fit most GM and Ford water pumps. Crank pulley spacers are for small block Chevys. Each kit includes three shims. Part No.

Description

ALL31064..............Water Pump Shims, 1/16", 1/16", 1/8" ALL31066..............Crankshaft Shims, 1/16", 5/64", 1/8"

Gilmer Belt Pulleys Black anodized, aluminum heat-treated pulleys accept 1" wide, 3/8" pitch drive belts. The 28T water pump pulley (ALL26460) ALL26440 ALL26420 ALL26460 is most commonly used with the 17T crank pulley (ALL26442) and a 22.5" Gilmer belt (ALL86132) for a 40% pump speed reduction. Part No.

Description

ALL26420..............28-Tooth Oil Pump Pulley, 5/8" Bore And 3/16" Keyway ALL26440..............16-Tooth Crank Pulley, 1" Bore And 1/8" Keyway ALL26442..............17-Tooth Crank Pulley, 1" Bore And 1/8" Keyway ALL26460..............28-Tooth Water Pump Pulley, 2" Wide

Gilmer Belts 1" Wide, assorted lengths. Part No. ALL31080

Description

ALL86130..............21.0" ALL86132..............22.5" ALL86134..............24.0" ALL86136..............25.5" ALL86138..............27.0"

Description

ALL31080..............Kit For Block Mount Power Steering Pump ALL31082..............Kit For Head Mount Power Steering Pump Related Components

ALL31084..............1:1 Crank Pulley ALL31085..............1:1 Water Pump Pulley ALL86121..............Belt, Crank to Water Pump, 34" ALL86123..............Belt, Crank/Water Pump/Block Mount P/S Pump, 41" ALL86125..............Belt, Crank/Water Pump/Head Mount P/S Pump, 44"

V-Belts Premium quality V-belts are perfect replacements for worn or cracked belts. Part No.

Description

ALL86120..............Belt, 31.5" ALL86121..............Belt, 34" ALL86122..............Belt, 39"

Part No.

Description

ALL86123...............Belt, 41" ALL86124...............Belt, 42" ALL86125...............Belt, 44"

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

37

performance

ENGINE COOLING ACCESSORIES


performance

ENGINE COOLING ACCESSORIES

Crank Mandrel Breakdown

Crank Pulley Mandrel Kit ALL31031 Kit prevents mandrel bolt breakage and is made specifically for use with Allstar ALL31030 crank pulley. Mandrel is attached to the crankshaft pulley with three bolts, while the vibration damper is retained with the stock bolt. The mandrel bolt is then connected to the mandrel – not to the crankshaft – to reduce engine harmonics (helps prevent loosening or breaking). Kit includes spacers, pulley guides, and bolts to work effectively with most 3, 4, and 5 stage Dry Sump Pumps, alone or with belt driven fuel pumps. Pulleys sold separately.

Replacement Parts Part No.

Billet aluminum bracket mounts JAZ overflow tanks to 1-1/2" or 1-3/4" round tubing. Bracket pivots to any angle. Mounting holes are 1/4" dia. Part No.

Description

ALL14200..............Bracket For 1-1/2" Tubing ALL14201..............Bracket For 1-3/4" Tubing

Description

ALL31032..............Crank Pulley Mandrel ALL31033..............Mandrel End Washer ALL31034..............Stepped Washer ALL31035..............Pulley Guide ALL31036..............Mandrel Key, 1/8" ALL31037..............Mandrel Bolt, 5/16"-18 x 1" (3-Pack) ALL31038..............Mandrel End Bolt, 1/2"-13 x 4"

Mandrel Spacers Aluminum spacers properly space and align pulleys when used with a 1/8" keyed mandrel. The same spacers are found in the ALL31031 Mandrel Kit. Sold individually. Part No.

Overflow Tank Brackets

Description

ALL31020..............1/4" Thick Spacer ALL31022..............1/2" " Thick Spacer ALL31024..............3/4" " Thick Spacer ALL31026..............1" Thick Spacer ALL31028..............1-1/4" Thick Spacer

Overflow Tanks Aluminum tanks are available in one or two quart capacities, and can be used in many forms of competition. Mandated by most sanctioning bodies to prevent coolant from spilling on the racing surface. Part No.

Description

ALL36112

Pulley Guide ALL31035

Overflow Tanks with Filler Neck

Hard-coated aluminum pulley guides help retain drive belt. Guides are .085" thick with a 1.00" ID, 1/8" keyway slot, and a 2.500" OD. The same guides are found in ALL31031 Mandrel Kits. Sold individually.

One quart aluminum tank is for cars with the manifold filler neck higher than the radiator top tank. Tank can be easily mounted as the highest point of the cooling system. Features a heavy duty aluminum neck designed to seal without compression of neck ring. Tapped with 1/8"NPT bung for overflow, 3/8"NPT bung on side, and 1/2"NPT bung on bottom.

Petcock ALL99030 Replacement petcock for Allstar breather and overflow tanks is also perfect for draining coolant from engines. 1/4"NPT threads.

38

ALL36114

ALL36112..............1 Quart Capacity, One 3/8"NPT Bung On Side, One 1/2"NPT Bung On Bottom With Fitting And Petcock ALL36114..............2 Quart Capacity, Two 3/8"NPT Bungs 90° Apart ALL99032..............Replacement Fitting For ALL36112

Part No.

Description

ALL36115..............Overflow Tank With Filler And Welded-On Bracket ALL36116..............Overflow Tank With Filler And Separate Bracket

ALL36115

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Aluminum Air Cleaners

Paper Air Filter Elements

Low profile, spun aluminum air cleaners have 5-1/8" necks and O-ring spacers for a positive seal. Plain aluminum or black powder coated tops are available. Offset bases clear HEI distributors. Elements also available separately.

ALL26020..............14" x 3" ALL26021..............14" x 3.5" ALL26022..............14" x 4" ALL26023..............14" x 5" ALL26028..............16" x 3" ALL26029..............16" x 3.5" ALL26030..............16" x 4"

Part No.

High performance paper air filter elements increase air flow. Part No.

Description

Washable Air Filter Elements

Description

14" Air Cleaners

ALL26094..............Standard Height Plain With 1/2" Spacer ALL26097..............Standard Height Black With 1/2" Spacer ALL26095..............Standard Height Offset Base Plain With 1/2" Spacer ALL26098..............Extra Height Plain With 1" Spacer ALL26099..............Extra Height Black With 1" Spacer ALL26096..............Standard Height Plain With 1/2" Spacer

Washable air filter elements offer better engine protection and increase air flow for more power and torque. After cleaning, elements may be re-used. Elements are pre-oiled and available in four heights.

Replacement Components

Part No.

16" Air Cleaner

ALL26090..............14" Air Cleaner Top Plain ALL26088 .............14" Air Cleaner Top Black ALL26092..............14" Air Cleaner Bottom ALL26091..............14" Air Cleaner Bottom Offset ALL26089..............16" Air Cleaner Top Plain ALL26093..............16" Air Cleaner Bottom ALL26085..............1/2" Spacer And O-ring ALL26086..............1" Spacer And O-ring ALL26087..............1-1/2" Spacer And O-ring

Air Cleaner Adapter ALL26080 Use the more readily available 4bbl. air cleaner on a Rochester 2bbl. carburetor. Accessorize with aftermarket air cleaner and retain stock 2bbl. carb. and intake. Racing classes using a 2bbl. can benefit from the higher flow of a 4bbl. air cleaner. Made of high strength ABS plastic. Adapter has a 3" I.D. and a 5-1/8" O.D.

Description

ALL26000..............14" x 3" ALL26002..............14" x 4" ALL26004..............14" x 5" ALL26006..............14" x 6"

Air Pans ALL26091

Lightweight aluminum air pans fit between the carburetor and cowl area to keep engine heat away from, and direct cool air to the carburetor. Cooler intake air means extra horsepower. Carb mounting flange is uncut. Part No.

Description

ALL26100

ALL26101

ALL26100..............Stepped Plenum ALL26101..............Flat Plenum

Air Cleaner Top Element ALL26010 Unique 14" dia. element replaces traditional metal lid to increase air flow for more horsepower and torque. Washable element may be cleaned and used over and over. Top element is pre-oiled and ready for installation.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

39

performance

ENGINE COOLING ACCESSORIES


performance

FUEL SYSTEM ACCESSORIES ALL25981

Air Cleaner Hold Down Seal Hold down seal prevents dirt from collecting in the “cup” of the air cleaner lid, which can fall into the carburetor causing major engine damage. This is specially designed to fit Allstar aluminum air cleaner lids. Available to fit 1/4" or 5/16" carburetor studs. Part No.

Description

ALL26050..............1/4"-20 Threads ALL26051..............5/16"-18 Threads

O-Ring Carb Nuts Seal air cleaner and eliminate using a wrench to remove air cleaner assembly. Available in 1/4" and 5/16" thread. Part No.

Short

Description

ALL26045..............Short, 1/4" Thread ALL26046..............Tall, 1/4" Thread ALL26047..............Short, 5/16" Thread ALL26048..............Tall, 5/16" Thread

Tall

ALL26057

Straight and offset studs (for use with Allstar offset base air cleaners) are 6" long with 1/4"-20 threads and a wing nut. ALL26056 also has an adapter for carbs with 5/16"-18 threads. ALL26057 has a 1-1/2" offset. Part No.

Description

ALL26056..............Straight Stud With Adapter ALL26057..............Offset Stud 1/4" x 6"

Carburetor Hats Use when air cleaner is removed. Screen type hat is recommended when adjusting valves. Black plastic hats are 2-1/2" tall for use with 5-1/8" diameter carb necks. Part No.

Description

ALL26040..............Carb Hat ALL26042..............Carb Hat With Screen

ALL25984

Spacers isolate carburetor from manifold, preventing horsepower-robbing heat transfer and increasing distance from the bottom of the carburetor to the manifold plenum for better air flow. Spacers are CNC-machined in the U.S. from a polymer compound that can withstand temperatures up to 400°F. Available in open or four hole versions for 4150 and 4500 series Holley and Holley style carburetors in 1/2", 1" and 2" thicknesses. Tapered four hole spacers have specially contoured holes to increase air velocity under the carburetor. Part No.

Air Cleaner Studs ALL26056

Hi-Flow Carburetor Spacers

Description

Part No.

ALL25986 Description

4150 Series

4500 Series

ALL25980.............Open, 1/2" Thick ALL25981.............Open, 1" Thick ALL25982.............Open, 2" Thick ALL25983.............4-Hole, 1/2" Thick ALL25984.............4-Hole, 1" Thick ALL25985.............4-Hole, 2" Thick ALL25986.............Tapered 4-Hole, 1" Thick ALL25987.............Tapered 4-Hole, 2" Thick

ALL25990 ............. Open, 1/2" Thick ALL25991 ............. Open, 1" Thick ALL25992 ............. Open, 2" Thick ALL25993 ............. 4-Hole, 1/2" Thick ALL25994 ............. 4-Hole, 1" Thick ALL25995 ............. 4-Hole, 2" Thick ALL25996 ............. Tapered 4-Hole, 1" Thick ALL25997 ............. Tapered 4-Hole, 2" Thick

Double-Ended Aluminum Wrench Set ALL11120 Wrenches make quick work of checking both halves of a fitting when the line is installed on the vehicle. Fittings need no longer be marred by steel wrenches. Wrenches are also sold individually.

Individual Double-Ended Wrenches Size

Hose Wrenches (Red) Part No.

Fitting Wrenches (Blue) Part No.

-4, -6 -8, -10 -12, -16

ALL11124 ALL11128 ALL11132

ALL11126 ALL11130 ALL11134

Carb Stand ALL26200

Aluminum stand simplifies carb maintenance and will hold carb off of work bench surface. Works with Edelbrock, Quadrajet, and Holley 2- and 4-barrel carbs.

40

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Fuel Lines

Performance 2-Valve Fuel Pumps

Allstar Fuel New Design! Lines, designed Fitting hex nuts are moved for Holley dual down for easier installation. feed carburetors, feature braided -8 line with a -8AN inlet and -4AN fitting with cap for a fuel pressure gauge.

Pumps have aluminum housings and 1/4"NPT inlet and outlet fittings, heavy duty diaphragms, anti-float springs, and “clockable” lower halves for rotation of inlet and outlet. Pumps deliver 6-1/2 to 8 PSI with 120 GPH free flow.

Part No.

Description

ALL26156..............Holley Double Pumper Dual Feed Line, 9-5/16" Center Distance ALL26157..............Barry Grant/Demon Fuel Line, 9-5/8" Center Distance ALL26158..............Holley Dominator Dual Feed Line, 13-5/8" Center Distance ALL26159*............Holley Double Pumper Dual Feed Line, 9-5/8" Center Distance *Used with a customized metering block carb (Willy’s And Bo-Laws).

Economy Fuel Log ALL26152 Fuel log includes -8 fitting for use with slip-on hose and housing is tapped 1/8"NPT for fuel pressure gauge. Compatible with Holley dual-feed carburetors. Fuel log is most commonly adapted to carburetor with two Aeroquip FCM2110 fittings.

Aluminum Carb Fittings Blue anodized, extra long fittings are commonly used with fuel logs. Overall length is 3.5", spaces fitting 3" from carburetor and includes sealing washer. Sold individually. Part No.

New Design! Fitting hex nuts are moved down for easier installation.

Description

ALL50900..............Holley Carb Adapter Fitting, 7/8"-20 Male To -8AN Female ALL50901..............Barry Grant/Demon Fitting, 9/16"-24 Male To -8AN Female

Holley Aluminum Carb Fitting ALL50905 7/8"-20 male to -8AN male fitting. The hex has been moved down and away from the carburetor for improved wrench access. Includes sealing washer.

Carb Sealing Washer ALL50910 Replacement 7/8" sealing washer fits Holley carburetors with 7/8"-20 inlet fittings. May be used as replacement washer for ALL26156, ALL26158 or ALL26159 fuel lines, and ALL50900 or ALL50905 carb fittings. Sold in packs of ten.

GM T.P.I. Fuel Injection Fittings Special tube O-ring fittings convert GM Tuned Port Injection fuel systems to -6AN fittings. Part No.

Description

ALL50951..............TPI Inlet Fitting ALL50950..............TPI Return Fitting

Part No.

Description

ALL40260..............SB Chevy, 6.5-8 PSI ALL40261..............BB Chevy, 6.5-8 PSI ALL40262..............SB Ford 289-351W, 6.5-8 PSI ALL40263..............SB Ford 351C, 351M, 400M, 6.5-8 PSI ALL40265..............BB Ford 352, 390, 427, 428, 6.5-8 PSI ALL40264..............Pontiac V8, 6.5-8 PSI

High Performance 6-Valve Fuel Pumps Pumps produce 6-1/2 to 8 PSI of fuel pressure and 110 GPH free flow. Inlet and outlet fittings are 3/8"NPT. Part No.

Description

ALL40270..............SB Chevy, 6.5-8 PSI ALL40272 .............BB Chevy, 6.5-8 PSI ALL40274 .............SB Ford 289-351W, 6.5-8 PSI ALL40276 .............BB Ford 429-460, 6.5-8 PSI

Racing 6-Valve Fuel Pumps With six valves and 1/2"NPT fittings, pump is capable of 130 GPH free flow. Use with gasoline or alcohol. Output is 13-16 PSI. Regulator is required. Part No.

Description

ALL40271..............SB Chevy, 13.0-16.0 PSI ALL40273..............BB Chevy, 12.0-16.0 PSI ALL40275..............SB Ford, 289-351W, 13.0-16.0

Compact Electric Fuel Pump ALL40320 High flow, low pressure electric fuel pump has 5/16" inlet/outlet and flows 18 GPH at 4.0 PSI, 5.5 PSI maximum. Popular mini-sprint pump includes a rubber-padded mounting bracket and two heavy duty hose clamps. Rated 12 volt/5 amps.

SB Chevy Fuel Pump Block Off Plate ALL40255 Zinc plated 1/8" thick steel plate covers fuel pump opening in block.

Billet Aluminum Fuel Pump Block-Off Plates Plates cover the mechanical pump opening in the block and include a gasket. Description

Blue Part No. Clear Part No. Red Part No.

SB Chevy ALL40300 BB Chevy, SB/BB Ford*, SB/BB Chrysler ALL40303 *Will not fit Ford 351C, 351M-400.

ALL40301 ALL40304

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

ALL40302 ALL40305

41

performance

FUEL SYSTEM ACCESSORIES


performance

FUEL SYSTEM ACCESSORIES Inline Aluminum Fuel Filters

Hi-Flow Chrome Fuel Filter ALL40250

Anodized, high flow inline filters are available with no element or with a stainless or paper element. Choose correct bracket and mount to chassis tubing along fuel line. Filter elements are 8" long and fit in a 9" housing. Overall length is 12" and outside diameter is 2". Filter flows enough fuel for any race car.

Canister-type filter has 3/8"NPT inlet and outlet, a replaceable 10 micron element and 90 gallons per hour flow.

Part No.

Description

Part No.

ALL40216..........-8 Ends And Paper Element ALL40217..........-10 Ends And Paper Element ALL40240..........-12 Ends And Paper Element

Replacement Parts Part No.

Description

ALL40251..............Element And Seals

Description

ALL40218............. -8 Ends And Stainless Element ALL40219............. -10 Ends And Stainless Element ALL40242............. -12 Ends And Stainless Element

Funnels Heavy duty plastic funnels are perfect for topping off fuel or other liquids. Available in several sizes.

Inline Aluminum Fuel Filters Without Element

ALL40244.........-8 Ends ALL40245.........-10 Ends ALL40246.........-12 Ends Replacement Parts

ALL40109

ALL40220.........Paper Element (10 Micron) ALL40222.........Stainless Element (63 Micron) ALL40224.........-8 End Cap ALL40226.........-10 End Cap ALL40225.........-12 End Cap ALL40236.........Spring ALL40237.........O-Ring 2-Pack Inlet

Outlet ALL40108

Filter Fact:

ALL40100

Filter element must be installed with the closed end and the spring toward the INLET end of housing. The open end faces the OUTLET.

Fuel Filter Brackets Brackets mount Allstar inline aluminum fuel filters to round or square tubing and flat surfaces. Flush mount bracket fastens to flat panels like a frame rail or firewall. A locking set screw holds filter in place. Brackets for round and square tubing clamp with caps secured by Allen head screws. Sold individually with hardware. Part No.

Part No.

ALL40104

ALL40106

Description

ALL40100..............6 Qt. Funnel With Brass Screen. Most Common Fuel Funnel ALL40102..............2 Qt. Funnel With Brass Screen ALL40104..............1 Pint Funnel With Brass Screen ALL40106..............4 Oz. Mini Funnels, Sold In Pairs (1 With Screen, 1 Without Screen) ALL40108..............1 Pint Extended Funnel. Designed For Automatic Transmissions And Other Hard-To-Reach Applications ALL40109..............Funnel Fill Adapter

Fuel Cell Hose Clear vent and filler hose is sold in pre-cut lengths of 5', 10' and 20'.

Description

ALL40227..............1-3/8" Round Tubing ALL40228..............1-1/2" Round Tubing ALL40230..............1-3/4" Round Tubing ALL40232..............2" x 2" Square Tubing ALL40234..............2" x 3" Square Tubing ALL40235..............Flush Mount ALL40228

ALL40232

ALL40235

Shockproof Pressure Gauges Gauges are 1-1/2" diameter with stainless steel cases and bezels. Available glycerinfilled, dry, or ALL80200 ALL80210 engine turned with brass internal parts and 1/8"NPT connections on back.

Description

5' Part No.

10' Part No.

20' Part No.

1" I.D. Vent Hose 1-1/4" I.D. Vent Hose 1-1/2" I.D. Vent Hose 2-1/4" I.D. Vent Hose 2-1/2" I.D. Vent Hose

ALL40160-5 ALL40161-5 ALL40162-5 ALL40168-5 ALL40170-5

ALL40160-10 ALL40161-10 ALL40162-10 ALL40168-10 ALL40170-10

ALL40160-20 ALL40161-20 ALL40162-20 ALL40168-20 ALL40170-20

Aluminum Fuel Line ALL80220

Description

Glycerin Filled

Dry Type

Engine Turned

0-15 PSI 0-30 PSI 0-60 PSI 0-100 PSI 0-1500 PSI NOS

ALL80200 ALL80202 ALL80204 ALL80206 ALL80208

ALL80210 – ALL80214 ALL80216 ALL80218

ALL80220 ALL80222 ALL80224 ALL80226 –

42

ALL40102

Allstar Aluminum Fuel Line is seamless and available in three diameters. 25 foot coil. Part No.

Description

ALL40180..............3/8" Dia. ALL40185..............1/2" Dia. ALL40186..............5/8" Dia.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Quick Fill Can ALL10100

Fuel Cell Container And Lid

Aluminum fill cans have an 11 gallon capacity and 45° necks to eliminate unnecessary elbows and assure quick flow.

For added protection, enclose the fuel cell with an economical, sheet metal container. Holes may be cut where they’re needed for fill plate and fuel lines. Lid fasteners are not included. 20 gauge steel. Part No.

Dry Break Valves

ALL40204

Description

ALL40138..............8 Gal., 17.5" x 13.5" x 9.25", Fits RJS11020S ALL40140..............12 Gal., 20.5" x 18" x 9.375" H., Fits Fuel Safe CT-112 ALL40142..............11 Gal., 18.5" x 18" x 9" H., Fits RJS11005 And 11 Gal. Cells ALL40144..............15 Gal., 25.75" x 17.5" x 9.5" H., Fits RJS11102, JAZ200-016-01, Fuel Safe CT-115 And 15 Gal. Cells ALL40146..............16 Gal., 25.75" x 18-1/8" x 10.25" H., Fits JAZ200-116-01 And 16 Gal. Cells ALL40148..............22 Gal., 33.25" x 18" x 9.25" H., Fit RJS11105, Fuel Safe CT122A And 22 Gal. Cells ALL40150..............22 Gal., 25.5" x 17.25" x 14.5" H., Fits JAZ200-222-01, Fuel Safe CT122B And 22 Gal. Cells ALL40152..............32 Gal., 26.25" x 18 x 18.5" H., Fit Fuel Safe CT132A, CT132AL And RJS10999OS

ALL40205

Female dry break valve bolts to rear quarter and replaces conventional filler cap. Male dry break mounts to quick fill can. Both flow 2 gals. per second and fit 2-1/2" fuel hose.

Fuel Cell Mounting Brackets

ALL40204..............Female Dry Break ALL40205..............Male Dry Break

Steel brackets are .085" thick, 1-3/4" wide and available in three lengths. All have 3/8" holes.

Replacement Parts

Part No.

Part No.

Description

ALL40206..............Rubber Boot ALL40207..............Flange ALL40208..............O-Ring For Female Dry Break ALL40209..............Cloth Boot ALL40210..............Rubber Nose For Male Dry Break

ALL40209

ALL40210

Description

ALL60060..............2" Long ALL60061..............3" Long ALL60062..............4-3/4" Long

Overflow Catch Can ALL10102 Aluminum can will catch overflow when refueling. Includes 6" rod for use with check valve and clear hose splash guard. 1.5 gallon capacity.

Overflow Check Valves Valves are 9-3/4" long and available in two styles. Use with ALL10102 overflow catch can. Part No.

ALL40200

Description

ALL40200..............1" Flapper Style ALL40201..............1-1/4" Flapper Style ALL40202..............1" Spring-Loaded ALL40203..............1-1/4" Spring-Loaded

ALL40202

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

43

performance

FUEL SYSTEM ACCESSORIES


performance

BRAKE SYSTEMS & ACCESSORIES Scalloped Brake Rotor ALL42011

Caliper Brackets

Lightweight solid rotor reduces unsprung weight and is scalloped to provide maximum weight reduction without compromising braking performance or rotor durability. Rotor is steel 8-bolt with a 7" bolt circle, 11.75" dia. and .250" thickness.

ALL42104

ALL42100

ALL42101

ALL42108

Made from 1/4" thick steel, brackets fit 3" diameter axle housings and work with 11.75" diameter rotors. Available for many setups.

Directional Vane Rotor

Part No.

Description

Rotor has 36 directional cooling vanes and is 1-1/4" thick x 11-3/4" diameter. Directional cooling vanes let brakes run much cooler. Rotor fits solid mounting brake hat or hub. Available in 8- or 10-bolt.

Clamp-On Brackets

Part No.

ALL42100..............For GM Style Calipers, 7" Spacing ALL42102..............For GM Metric Calipers, 5-1/2" Spacing ALL42104..............For Wilwood Dynalite And Sierra Mini GN Dual Calipers, 5-1/4" Spacing ALL42108..............For Wilwood Superlite And Sierra XL Calipers, 3-1/2" Spacing

ALL42101..............For GM Style Calipers, 7" Spacing ALL42103..............For GM Metric Calipers, 5-1/2" Spacing ALL42105..............For Wilwood Dynalite Calipers, 5-1/4" Spacing ALL42109..............For Wilwood Superlite Calipers, 3-1/2" Spacing Weld-On Brackets

Description

ALL42000..............LH 1.25" x 11.75" 8-Bolt ALL42001..............RH 1.25" x 11.75" 8-Bolt ALL42002..............LH 1.25" x 11.75" 10-Bolt ALL42003..............RH 1.25" x 11.75" 10-Bolt

Mustang II Caliper Brackets

Stamped Steel Rotor Hat ALL42120

Install 11" Granada rotors and intermediate GM metric style calipers on stock height or lowered spindles. Heavy duty cast iron brackets weigh 3 lbs. each, are sold in pairs and include mounting hardware. Lightweight steel brackets weigh just 1.25 lbs each, are sold individually and do not include mounting hardware.

Brake hat fits 8-bolt rotors with 7" bolt circle mount. Made of stamped steel with a 3" offset and drilled for 4-1/2", 4-3/4" and 5" bolt circles. Hat has 3.060" diameter centering hole and fits axle flanges with up to 5.75" diameter.

Part No.

Cast Rotor Hats

Brake hats are offered in cast iron or cast aluminum construction. Hats, which are available in two offsets, fit 8-bolt rotors with 7" bolt circle mount, have a 3.060" dia. centering hole and fit axle flanges with up to 6.050" dia. Part No.

Description

ALL42106..............Cast Iron Caliper Brackets, 1-Pair ALL42110..............LH Lightweight Steel Caliper Bracket, Each ALL42111..............RH Lightweight Steel Caliper Bracket, Each

New Design!

ALL42106

ALL42111 ALL42110

Brake Calipers Stock style calipers are perfect replacements on most GM vehicles and will fit up to 1" wide rotor. Metric inlet thread is 10mm x 1.50 pitch. Big GM inlet thread is 7/16"-20. ALL42126

Description

Cast Iron Rotor Hats

ALL42126..............2-1/2" Offset, 6.4 Lbs. ALL42121..............3" Offset, 7.4 Lbs. Aluminum Rotor Hats

ALL42129..............2-1/2" Offset, 2.2 Lbs. ALL42128..............3" Offset, 2.5 Lbs.

Part No.

Description

ALL42081..............RH 1973-77 Big GM ALL42082..............LH 1973-77 Big GM ALL42083..............RH 1978-87 Metric GM ALL42084..............LH 1978-87 Metric GM Note: We reference RH (right-hand) or LH (left-hand) based on the caliper being mounted behind the rotor, however, all calipers may be mounted on the front or backside of the rotor.

ALL42129

Rotor Bolt Kit ALL42026

Caliper Bolts ALL42080

Grade 5, 5/16" bolts fasten disc brake rotors to rotor hat or hub. Includes ten bolts, ten washers and ten self-locking nuts.

Unique caliper bolts for most GM calipers have a 5/8" hex head for easy installation and removal. The 1-1/8" sleeves permit extra caliper travel. Sold two per pack.

Aluminum Caliper Bracket ALL42134

Aluminum Caliper Spacers

Lightweight bracket is CNC-machined from 6061-T6 aluminum. 3-1/2" spacing will fit Wilwood Superlite Calipers.

44

Use spacers with thin rotors, most aftermarket (Wilwood and Howe) and some stock calipers. Spacers are .190" thick and sold individually. Part No.

Description

ALL42040..............GM Metric (5-1/2" Bolt Spacing) ALL42041..............Big GM (7" Bolt Spacing)

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Corvette Style Master Cylinder

Floor Pedal Plate ALL54050 Weld-in pedal plate is 19" x 5" x 1/8" and speeds up race car construction by providing the proper spacing for mounting pedal/master cylinder assemblies.

ALL41010 New, not remanufactured, dual reservoir, 1" bore master cylinder has 3/16" inverted flare outlets on either side for plumbing brake lines. Compatible with power or manual brake systems.

Power Brake Boosters Boosters are available in 7" or 8" diameter and fit the Allstar brake pedals as well as other aftermarket units. For use with ALL41010 master cylinder. The 7" booster is 3-5/8" deep, the 8" booster is 4-1/4" deep. Part No.

Nylon Brake Line Kit ALL48030 Quickly plumb any race car using an Allstar nylon brake line kit. Kit extends from the master cylinder to the caliper and includes 35 feet of 3/16" line, compression ends, unions, tees and 1/8"NPT fittings. Race proven for years. Not for street use.

Description

ALL41005..............7", Single Diaphragm, Universal ALL41006..............8", Dual Diaphragm, Universal ALL41007..............’55-64 Chevy, 7", Single Diaphragm, Standard Finish ALL41008..............’55-64 Chevy, 7", Single Diaphragm, Chrome ALL41009..............’55-64 Chevy, 8", Dual Diaphragm, Standard Finish

Part No.

Description

Replacement Line

Master Cylinder Remote Reservoirs

ALL48026..............10 Ft. ALL48027..............50 Ft. ALL48028..............100 Ft.

High-impact plastic remote reservoirs simplify brake bleeding, especially when master cylinder is mounted low in the chassis. Available with single or dual outlet and may be connected to master cylinder with a 5/16" hose. Part No.

Replacement Brass Fittings For Nylon Brake Line Kit

ALL48032..............1/8"NPT Straight ALL48033..............1/8"NPT 90° ALL48034..............3/16" Male Union ALL48032 ALL48034 ALL48036 ALL48035..............3/16" Male Tee ALL48036..............3/16" Captured End Caps, 10-Pack ALL50040..............Caliper Fitting 10mm-1.5 Male To 1/8"NPT Female 2-Pk. (Not Included In Kit. Needed For Use With Metric GM Calipers To Nylon Brake Line)

Description

ALL42045..............Single Outlet ALL42046..............Dual Outlet

Brake Hose Kits

Hanging Brake Pedal Mount

Kits include everything needed to complete the connection from 3/16" steel brake line to brake caliper. Choose kit to fit metric or big GM calipers.

ALL54060 Welds to chassis for Wilwood style hanging pedals.

Kit Components:

Proportioning Valve ALL48025 Adjust front-to-rear brake bias with the twist of a knob. Provides up to 57% reduction. Fitting ports are 1/8"NPT. Valve includes two fittings to adapt to 3/16" brake line. 1" long, 1-3/4" wide and 3-5/16" tall.

Brake Shut-Off Valve ALL48010 Valve has 1/8"NPT inlet and outlet and is rated at 2,000 PSI. Use Allstar ALL50120 fitting for 3/16" inverted flare brake line. Dimensions: 1/2" W x 1-3/4" L x 1-9/16" H.

New Design!

• Two 15" Long Hoses With -3AN Ends • Two Banjo Bolts • Four Crush Washers • Two Brake Line Clips • Two -3AN To 3/16" Steel Brake Line Adapters • Two -3AN Banjo Fittings • Two Brake Line Tabs Part No.

Description

ALL42025..............Metric Kit With 10mm-1.50 Fittings ALL42027..............Big GM Kit With 7/16"-20 Fittings

Brake Line Deflectors Deflectors mount on caliper or spindle to protect brake lines and fittings from damage. Sold individually. Part No.

ALL50250

Description

ALL50250..............LH Deflector ALL50251..............RH Deflector ALL50251

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

45

performance

BRAKE SYSTEMS & ACCESSORIES


performance

BRAKE SYSTEMS & ACCESSORIES Steel Brake Line

ALL48040

3/16" steel brake line is available in lengths from 8" to 25' for plumbing brake systems. Standard galvanized zinc coating. Part No.

Description

Part No.

ALL48048..............8" Brake Line ALL48050..............12" Brake Line ALL48052..............20" Brake Line ALL48054..............30" Brake Line ALL48056..............40" Brake Line

Update and greatly improve braking power by converting standard drum brake rear ends to disc brakes. Universal rotor hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt patterns. Caliper mounting brackets weld onto 3" axle tubes. Rotor hats included in these kits will not work with some aftermarket axles. Axles with flanges larger than 5-3/4" must use cast iron or cast aluminum rotor hats, ALL42121-ALL42129. Kits Do Not Have Provisions For Parking Brake.

Description

ALL48058 .......51" Brake Line ALL48060 .......60" Brake Line ALL48062 .......72" Brake Line ALL48040 .......25' Coil Brake Line

ALL42019

Powder Coated Brake Lines

Kit includes rotors (.810" x 11.75"), universal rotor hats, rotor bolt kits, caliper mounting bolts and brackets for GM intermediate metric style calipers (ALL42083 and ALL42084).

Steel powder coated lines easily bend without flaking. Six colors to choose from, each 3/16" diameter. Available in 5' (straight) or 25' (coiled) lengths. Brake lines do not include flare nuts (sold separately). Black Part No.

Silver Part No.

Red Part No.

Blue Part No.

Green Part No.

Yellow Part No.

5' Straight Brake Line ALL48064 ALL48065 ALL48066 ALL48067 ALL48068 ALL48069 25' Coiled Brake Line ALL48041 ALL48042 ALL48043 ALL48044 ALL48045 ALL48046

3/16" Inverted Flare Nuts Used with our 3/16" coiled, straight or powder coated steel brake line for building custom length lines. Nuts have 3/8"-24 thread and are sold in packs of ten. Part No.

Description

ALL50110..............Zinc Plated, 10-Pack ALL50112..............Black Anodized, 10-Pack

Tubing Cutters Cut plastic, aluminum, copper or steel tubing without distorting or crushing. Standard cutter works with tubing from 1/8" up to 1-1/8" and has wide rollers for even tracking of cutter wheel, built in reamer for cleaning inside of tubing and an extra cutting wheel. Mini cutter can cut tubing from 1/8" to 5/8" in tight areas. Part No.

Rear Disc Brake Kits

Description

ALL11010..............Mini Tubing Cutter ALL11011..............Standard Tubing Cutter

ALL42020 Kit includes rotors (1.250" x 11.75"), universal rotor hats, rotor bolt kits, caliper mounting bolts and caliper mounting brackets for big GM style aftermarket calipers. ALL42021 Kit includes rotors (1.250" x 11.75"), universal rotor hats, rotor bolt kits, caliper mounting bolts, mounting brackets and Wilwood billet calipers.

ALL42022 ALL11010

ALL11011

Kit includes rotors (.810" x 11.75"), universal rotor hats, rotor bolt kits, caliper mounting bolts and brackets for big GM style calipers (ALL42081 and ALL42082).

Double Flare Tool ALL11015

ALL42023

Double flares 3/16", 1/4", 5/16", 3/8" and 1/2" steel or aluminum and .040" copper tubing at 45 degrees, the most common flare used in custom length brake and fuel lines. Includes instructions and a plastic storage case.

Kit includes rotors (.810" x 11.75"), universal rotor hats, rotor bolt kits, caliper mounting bolts and mounting brackets, big GM calipers, and Wilwood Green Gator brake pads.

46

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Braided Steel Lines Allstar has a full selection of braided steel lines in lengths from 6" to 48" and a choice of three different ends. The inner hose is Teflon, which is compatible with all brake fluids. Braided stainless steel outer covering resists abrasion and corrosion. Ideal for use where bending and flexing occur. More durable than rubber hose. Choose from -3 line with -3 or -4 hose ends and -4 line with -4 hose ends in straight, 45 degree or 90 degree configurations. Hose Size and End Type

-3 Hose with Two -3 Straight Ends

12"

15"

18"

21"

24"

30"

ALL48101 ALL48102 ALL48103 ALL48104 ALL48105 ALL48106

-3 Hose with One -3 45° End One -3 Straight End

ALL48112 ALL48113

-3 Hose with One -3 90° End One -3 Straight End

ALL48122 ALL48123 ALL48124 ALL48125 ALL48126

-3 Hose with One -4 Straight End One 10mm Banjo

-3 Hose with Two -4 Straight Ends

-3 Hose with One -4 90° End One -4 Straight End

-4 Hose with Two -4 Straight Ends

36"

42"

48"

ALL48108

ALL48128 ALL48129

ALL48195

ALL48132 ALL48133 ALL48134 ALL48135

ALL48115

32"

ALL48153

ALL48161 ALL48162 ALL48163 ALL48164 ALL48165 ALL48166 ALL48167 ALL48168 ALL48169 ALL48170

-4 Hose with One -4 45° End One -4 Straight End

ALL48172 ALL48173

-4 Hose with One -4 90° End One -4 Straight End

ALL48182 ALL48183 ALL48184 ALL48185 ALL48186 ALL48187 ALL48188 ALL48189

-4 Hose with One -4 Straight End One 10mm Banjo

ALL48175

ALL48194

Note: The -3 line with the more popular -4 hose ends provides the higher brake pressure of the -3 line. Lines are available straight-tostraight, or straight-to-90 degree.

Actual Size Reference

-4AN Straight -3AN Straight

-4AN 45° -3AN 45°

-4AN 90° -3AN 90°

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

47

performance

BRAKE SYSTEMS & ACCESSORIES


performance

BRAKE SYSTEMS & ACCESSORIES Fittings We carry a large selection of quality brake fittings to meet all brake plumbing needs. Quantity Per Package

Part No.

Description

ALL50000 ALL50001 ALL50010 ALL50011 ALL50020 ALL50021 ALL50030 ALL50032 ALL50035 ALL50036 ALL50040 ALL50061 ALL50062 ALL50063 ALL50066 ALL50067 ALL50068 ALL50070 ALL50072 ALL50076 ALL50077 ALL50080 ALL50082 ALL50100 ALL50101 ALL50110 ALL50112 ALL50120 ALL50125 ALL50130 ALL50136 ALL50150 ALL50180 ALL50200 ALL50300 ALL50310

Steel Adapter -3 To 1/8"NPT Wilwood Caliper Steel Adapter -4 To 1/8"NPT Wilwood Caliper 45° Steel Fitting, 1/8"NPT To -3 45° Steel Fitting, 1/8"NPT To -4 Tall 90° Steel Fitting, 1/8"NPT To -3 Tall 90° Steel Fitting, 1/8"NPT To -4 3/8"-24 x -4 Caliper (Fitting And Crush Washer) 7/16"-20 x -4 Caliper (Fitting And O-Ring) 90° Steel Fitting, 7/16" SAE To -4 10mm-1.50 x -4 Caliper (Fitting & Crush Washer) 10mm-1.50 Male To 1/8" Female Caliper Fitting 3/8" Banjo To -4 7/16" Banjo To -3 7/16" Banjo To -4 10mm Banjo To -4 10mm Banjo To -3 10mm Banjo To -4 3/8" SAE Banjo Bolt 7/16" SAE Banjo Bolt 10mm-1.25 Banjo Bolt 10mm-1.50 Banjo Bolt 7/16" Crush Washer 10mm Or 3/8" Crush Washer Steel Adapter -3 To 3/16" Brake Line Steel Adapter -4 To 3/16" Brake Line 3/16" Inverted Flare Nut Black Anodized 3/16" Inverted Flare Nut 1/8"NPT To 3/16" Inverted Flare 1/8"NPT To 3/16" Inverted Flare 90° 3/16" Inverted Flare Union 3/16" Inverted Female Tee Brake Line Clip 1/8"NPT Bleeder Screw 1/8" Female Pipe To -4 Gauge Fitting -3 Tube Nut For 3/16" Steel Brake Line -3 Tube Sleeve For 3/16" Steel Brake Line

2 2 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 10 10 2 2 10 10 4 4 4 2 4 4 1 4 4

ALL50000

ALL50021

ALL50036

ALL50063

ALL50001

ALL50010 ALL50011

ALL50030

ALL50040

ALL50020

ALL50032

ALL50035

ALL50061 ALL50068

ALL50066

ALL50062 ALL50067

ALL50070

ALL50076

ALL50077

ALL50100

ALL50101

ALL50072

ALL50080

ALL50150

ALL50120

ALL50125

ALL50130

ALL50180

ALL50200

ALL50300

ALL50082

ALL50110

ALL50112

ALL50136

ALL50310

Brake Line Adapter Mounting Brackets Secure brake line adapters with bolt-on or weld-on brackets. Bolt-on bracket has two 3/16" holes. Part No.

Description

ALL60029

ALL60030

ALL60029..............Bolt-On, 2-Pack ALL60030..............Weld-On, 4-Pack

TECH TIP

Hookup Reference Braided Steel Line

Mounting Tab ALL60029 Or ALL60030

48

Brake Line Clip ALL50150 Rigid Brake Line

-3AN Or -4AN To 3/16" Brake Line Adapter ALL50100 (-3AN) ALL50101 (-4AN)

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Lug Nuts

Description Aluminum Lug Nuts

5/8"-11 (Coarse) Double Chamfer 5/8"-11 (Coarse) Double Chamfer*

Large diameter, open end lug nuts will not pull through the wheel. Choose steel or aluminum, SAE or metric threads. Nuts fit 1" socket and are sold in packs of 10, or in boxed quantities.

Steel Lug Nuts 5/8"-11 (Coarse) Double Chamfer

5/8"-11 (Coarse) 5/8"-18 (Fine) 1/2"-20 (Fine) 7/16"-20 (Fine) 12mm - 1.5 (Metric) *Hard Coated

Pack Of 10 Part No.

Box Of 100 Part No.

Box Of 350 Part No.

Box Of 400 Part No.

ALL44096 ALL44097

ALL44096-100 ALL44097-100

– –

– –

ALL44098

ALL44098-100

ALL44106 ALL44104 ALL44102 ALL44100 ALL44101

ALL44106-100 ALL44104-100 ALL44102-100 ALL44100-100 ALL44101-100

– – ALL44102-350 – ALL44101-350

ALL44106-400 ALL44104-400 – ALL44100-400 –

Wheel Studs

Pit Sockets

Larger-than-stock studs require redrilling of stock flanges. Check sanctioning body for wheel stud requirements. Sold in packs of five.

Allstar has assembled the best selection of wheel sockets available. For use with 1" lug nuts.

1.700"

Part No.

Description

ALL10230

Super Sockets

ALL44110 1/2"-20 x 2" Long, Fine Thread, .589" Dia. Knurl

.650" 1.900"

ALL44112

ALL10230..............1" Short Steel ALL10232..............1" Long Steel ALL10234..............1" Short Kryptonite ALL10236..............1" Long Kryptonite

ALL10234

ALL10240 ALL10241

Pit Socket With Extension

1/2"-20 x 2-1/4" Long, Fine Thread, .619" Dia. Knurl

ALL10240..............12" Pit Socket Super Sockets With Extensions

.650"

ALL10241..............11" Pit Socket ALL10242..............5" Pit Socket

ALL44114 5/8"-18 x 2" Long, Fine Thread, .685" Dia. Knurl

Tire Tape Measures

.560"

Ten foot long tapes are ideal for measuring tire diameters.

ALL44118 5/8"-18 x 2" Long, Fine Thread, .655" Dia. Knurl

ALL10242

Part No.

.825"

Description

ALL10111..............Economy ALL10112..............Deluxe

ALL10111

.750"

ALL44120

Brass Valve Stem

5/8"-18 x 2-1/2" Long, Fine Thread, .645" Dia. Knurl, .672 Dia. Shoulder

ALL10112

ALL44134 .250"

ALL44115

Brass bolt-in valve stem resists cutting during contact.

Snap-In Rubber Valve Stem

5/8"-11 x 2" Long, Coarse Thread, .690" Dia. Knurl .375"

ALL44117

Economical rubber valve stem pulls through wheel for easy installation. Fits a 5/8" hole. Part No.

.375"

ALL44116

5/8"-11 x 3-3/4" Long, Coarse Thread, .690" Dia. Knurl

Flush Mount Valve Stem Kit ALL44137

5/8"-11 x 2-3/4" Long, Coarse Thread, .690" Dia. Knurl

ALL44119

Description

ALL44136..............Rubber Valve Stem 4-Pack ALL44136-50 .......Rubber Valve Stem 50-Pack

5/8"-11 x 2-3/4" Long, Coarse Thread, .690" Dia. Knurl

.725"

Steel valve stem remains flush with the outside of the wheel. Retaining nut attaches from the inside of wheel. Includes extension filler tube and dust cap. Four per package. Fits 1/2" valve stem hole.

Replacement Filler Tube ALL44138

Valve Core Tool ALL44030 .725"

Easily remove and install valve cores. Base of handle has a machined pattern for grip. Crafted from stainless steel. 3" in overall length.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

49

performance

TIRE & WHEEL ACCESSORIES


performance

REAR END ACCESSORIES Heavy Duty Ford 9" Floater Housing Assemblies

Custom Width Ford 9" Housing ALL68710

Heavy duty housings are jig welded for alignment and furnished with vent, fill and drain plugs. Assemblies include a select used center section, new axle tubes, steel or aluminum 8-bolt 5x5 hubs, Wilwood .810" or 1-1/4" rotors, bearing and seal kit, and rotor bolts. Axles are now sold separately. Custom housings are also available. Housing Width/Offset

Bare Housing

Assembly With Steel Hub

Assembly With Aluminum Hub

60"/Centered 60"/2" Offset 61"/Centered 62"/Centered 62"/1" Offset 62"/2" Offset 63"/Centered 63"/2" Offset 64"/Centered

ALL68700 ALL68702 ALL68703 ALL68704 ALL68705 ALL68706 ALL68707 ALL68708 ALL68709

ALL68720 ALL68722 ALL68723 ALL68724 ALL68725 ALL68726 ALL68727 ALL68728 ALL68729

ALL68740 ALL68742 ALL68743 ALL68744 ALL68745 ALL68746 ALL68747 ALL68748 ALL68749

9" Non Floater Housing Kit For GM Intermediate Metric Chassis

Housings, for stock or floating axles, can be built to any width and pinion location. Floating axle housings are available with Allstar/Howe/Port City, SCP or AFCO 5x5, or Wide 5 Pins. Stock housings can be ordered with small Ford, big Ford, or new style big Ford ends. Select used center sections, as well as new Heavy Duty or “Hot Rod” style center sections, may be specified. “Hot Rod” center section provides clearance for brackets or exhaust systems in street rods and other vehicles with limited space. All housings have select used centers, new axle tubes installed and are jig-welded for straightness. To order please call and request a special order form, fill in all of the required information and return to us with a signature attached. Housings are non-returnable and offered on a special order basis only.

TECH TIP

Housing Measuring Diagram (60"*) (28"*)

(32"*)

Top View Front Of Vehicle

Example: Bare housing ALL68702 is 60" from hub face to hub face and the pinion is located 2" to the left of the housing centerline when viewed from rear of housing.*

Replace the stock 1978-88 GM metric 7.5" intermediate rear end with a much stronger Ford 9". The upper and lower trailing arm mounting brackets are welded in place. Kit includes a select used center section, new axle tubes with large bearing late Ford/Torino style ends, 31-spline axles with bearings and seals installed, drilled for 1/2"-20 wheel bolts with 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles and 1/2"-20 wheel studs. Two widths are available, 58" and 60" axle flange to axle flange. Part No.

Notes: Please measure and inspect housing before welding brackets or painting. Housing is non-returnable if modified or custom. Welding suspension brackets on rear end housings can cause warping. Check for straightness after welding. These housings use Allstar ALL72100 inner grease seals. *Dimensions for example only.

Description

ALL68752**..........Ford 9" Housing Kit 58" ALL68754..............Ford 9" Housing Kit 60" **Axles will require approximately 1" cut and beveled from spline end.

Pinion Centering Jig ALL68370 Accurately locates pinion centerline when building or narrowing a rear end housing. Fits Ford 9", 12-bolt Chevy, 8-3/4 Mopar, and Dana 60 rear ends.

50

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Steel Axle Tubes

Aluminum Axle Tubes

Allstar Steel Axle Tubes are 3" in diameter and may be shortened. Available in 24" to 34" lengths.

Allstar Aluminum Axle Tubes are 3" in diameter and may be shortened. Available in 25" to 35" lengths.

Part Number

Tube Length To Inner Bearing

Overall Tube Length

Wide 5 ALL68216 25" ALL68218 26" ALL68220 27" ALL68222 28" ALL68224 29" ALL68226 30" ALL68228 31" ALL68230 32" ALL68231 32.5" ALL68232 33" ALL68234 34" 5x5, 2.5" Pin, SCP, Winters, AFCO, D&M ALL68246 25" ALL68252 28" ALL68256 30" ALL68258 31" ALL68260 32" 5x5, 2.0" Pin, Allstar, Howe, Port City ALL68264 24" ALL68266 25" ALL68268 26" ALL68270 27" ALL68272 28" ALL68274 29" ALL68276 30" ALL68278 31" ALL68280 32"

Axle Length

19.5" 20.5" 21.5" 22.5" 23.5" 24.5" 25.5" 26.5" 27" 27.5" 28.5"

31" 32" 33" 34" 35" 36" 37" 38" 38.5" 39" 40"

22.5" 25.5" 27.5" 28.5" 29.5"

31.5" 34.5" 36.5" 37.5" 38.5"

20.5" 21.5" 22.5" 23.5" 24.5" 25.5" 26.5" 27.75" 28.75"

30" 31" 32" 33" 34" 35" 36.5" 37.5" 38.5"

TECH TIP

How To Measure Axle Tube Length Sidebell Or Housing

Part Number

Overall Tube Length

Tube Length To Inner Bearing

Axle Length

25" 26" 26-5/8" 27" 28" 29" 30" 32" 35"

19.5" 20.5" 21-1/8" 21.5" 22.5" 23.5" 24.5" 26.5" 29.5

31" 32" 32-1/2" 33" 34" 35" 36" 38" 41"

Wide 5 ALL68200 ALL68202 ALL68203 ALL68204 ALL68206 ALL68208 ALL68210 ALL68212 ALL68213

Universal Ford 9" Axle Housing Seal ALL72098 Internal seal keeps lube in the center section where it belongs to eliminate premature rear end failure. Bellows style seal fits most 3" O.D. axle tubes regardless of wall thickness. Internal seal diameter of .950" works with most 28- and 31-spline axles.

Ford 9" Axle Housing Seals Internal seals prevent gear lube from leaking into axle tube to eliminate premature rear end failure. Seal housings are O-ring type with spring-loaded seals. For use with 3" O.D. axle tubes and most 31-spline axles. Measure I.D. of tube for proper fit. Part No.

Description

ALL72100*............2.625" O.D. Fits 3/16" Wall, 3" Tube, Red ALL72102..............2.562" O.D. Fits 7/32" Wall, 3" Tube, Blue ALL72104..............2.500" O.D. Fits 1/4" Wall, 3" Tube, Gold

Axle Tube

Replacement Parts

5" Overall Tube Length Axle tube should extend 5" into side bell or aluminum housing.

Weld-On Snouts

Axle Tube Oil Seal ALL72140

Weld-on snouts may be used for repairing existing axle tubes or custom building new tubes. Three hub styles are available. Part No.

Description

ALL68300..............Wide 5 ALL68302..............Howe, Allstar, PCR, 5x5, 2.0" Pin ALL68304..............RH SCP, AFCO, Winters, D&M, 2.5" Pin ALL68305..............LH SCP, AFCO, Winters, D&M, 2.5" Pin

ALL72101..............O-Rings For ALL72100, 3-Pack ALL72103..............O-Rings For ALL72102, 3-Pack ALL72105..............O-Rings For ALL72104, 3-Pack ALL72108..............Inner Seal *Use with Allstar steel axle tubes.

ALL68300

Also called a spool seal, it fits Frankland, Winters, and other quick change rear ends. Seal is pressed into side bell or axle tube and seats against the bearing flange of the spool to prevent lube from leaking into axle tubes. Seal has a 1.85" I.D. and a 2.625" O.D.

ALL68302

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

51

performance

REAR END ACCESSORIES


performance

REAR END ACCESSORIES Axles

Steel Driveshafts

Allstar Axles fit most quick change and Ford 9" rears. Available in solid 28- or 31-spline or lightweight, gun-drilled 31-spline styles. Use with 24-spline drive flanges. Length

28-Spline Solid

31-Spline Gun-Drilled

31-Spline Solid

26.5" 27" 27.5" 28" 28.5" 29" 29.5" 30" 30.5" 31" 31.5" 32" 32.5" 33" 33.5" 34" 34.5" 35" 35.5" 36" 36.5" 37" 37.5" 38" 38.5" 39" 39.5" 40"

ALL67266 ALL67271 ALL67276 ALL67281 ALL67286 ALL67291 ALL67296 ALL67301 ALL67306 ALL67311 ALL67316 ALL67321 ALL67326 ALL67331 ALL67336 ALL67341 ALL67346 ALL67351 ALL67356 ALL67361 ALL67366 ALL67371 ALL67376 ALL67381 ALL67386 ALL67391 ALL67396 ALL67401

ALL66265 ALL66270 ALL66275 ALL66280 ALL66285 ALL66290 ALL66295 ALL66300 ALL66305 ALL66310 ALL66315 ALL66320 ALL66325 ALL66330 ALL66335 ALL66340 ALL66345 ALL66350 ALL66355 ALL66360 ALL66365 ALL66370 ALL66375 ALL66380 ALL66385 ALL66390 ALL66395 ALL66400

ALL66266 ALL66271 ALL66276 ALL66281 ALL66286 ALL66291 ALL66296 ALL66301 ALL66306 ALL66311 ALL66316 ALL66321 ALL66326 ALL66331 ALL66336 ALL66341 ALL66346 ALL66351 ALL66356 ALL66361 ALL66366 ALL66371 ALL66376 ALL66381 ALL66386 ALL66391 ALL66396 ALL66401

Aluminum Axle Plug ALL66100 Axle plug threads into the end of a gundrilled Allstar, Ford 9", or quick change axle to keep rear end lube out of the axles. 3/8"-24 internal thread for correct axle spacing.

Balanced 2-1/2" lightweight D.O.M. steel driveshafts feature heavy duty U-joints with grease fittings, and TH-350 or Powerglide slip yoke. Shafts are painted white and available in 30.5" and 31.5" lengths. Uses 1310 (3-1/4") U-Joint. Yoke measures 5.50" from U-Joint centerline to end, with 3.50" of slip length. Part No.

Description

ALL69020..............30.5" Steel Driveshaft ALL69022..............31.5" Steel Driveshaft ALL69015..............U-Bolt Kit For ALL69020 And ALL69022 Yoke (Pair) ALL69030..............1310 U-Joint ALL72152

Tailshaft Seal And Bushing The tailshaft bushing is a regular wear item, located inside the transmission tailshaft housing. It should be replaced when replacing the tailshaft seal or when a driveshaft failure has occurred. A worn bushing will cause excessive side-to-side movement of the slip yoke and create a vibration or leak. Replacement bushing and seal fits GM Powerglide, Turbo 350, Saginaw, Muncie, Bert and Brinn transmissions. Part No.

Description

ALL72150..............Seal ALL72152..............Seal With Bushing

Driveshaft Loop ALL69000 Universal driveshaft loop contains the driveshaft if a yoke or U-joint fails. Loop is 1/4" thick x 2" wide mild steel and fully adjustable to fit most cars.

Axle Spline Tool ALL66104

Unwelded Driveshaft Loop

Tool clamps in a vise to hold 31-spline axles for maintenance or installation of axle plugs. Assures perfect spline alignment when installing lock-up plugs used with Gold-Trac differentials.

ALL69004

T-Handle Axle Puller ALL66115

Made from 3/16" flat steel, loop is 9-1/2" tall, 5-1/2" wide with a 16" wide mounting strap that can be cut and welded for each installation.

180째 Driveshaft Loop ALL69002 Sturdy 1" dia., .120" wall loop is engineered for chassis type cars.

All-in-one T-handle puller threads into axle for easy installation or removal. Tool includes adapters for fine or coarse 3/8" threaded solid axles, and 3/4" coarse threads for gundrilled axles.

52

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Ford 9" Pinion Support

Ford 9" Set Up Carrier ALL14169

Allstar Ford 9" billet aluminum supports replace original equipment style cast iron supports. Pro support is for 35-Spline pinion, Pro Gear-equipped differentials. Standard “Daytona” support is for 28-Spline pinion rears. Supports are furnished with races installed.

Set up carrier takes the place of the gear set on Ford 9" rear end housings and will keep dirt and debris out of the housing. A pinion bracket can be attached to the cover so the J-bar or Panhard bar can be mounted for car transportation. The tip of the handle matches the centerline of the driveshaft U-joint so driveshaft length can be easily measured. Gloss red powder coated finish.

Part No.

ALL68390

ALL68395

Description

ALL68390 .............Pro, 35-Spline ALL68395 .............Standard “Daytona”, 28-Spline ALL68396 .............Black Anodized, Standard “Daytona”, 28-Spline ALL68396

Ford 9" Pinion Yokes Forged steel or billet aluminum Allstar Pinion Yokes are available for Ford 9". Part No.

Description

ALL68380 .............28-Spline Steel Pinion Yoke, Use With 1350 (3-5/8") U-Joint ALL68382 .............35-Spline Steel Pinion Yoke, Use With 1350 (3-5/8") U-Joint ALL68384 .............28-Spline Aluminum Pinion Yoke, Use With 1310 (3-1/4") U-Joint

Ring And Pinion Gear Sets

Pinion Seals

Quality differential components are suitable for race, street and off-road use. Lapped in matched sets for quiet operation.

Replace leaking or damaged seals. Part No.

Description

ALL72145 .............Quick Change ALL72146 .............Ford 9" Standard, 28-Spline ALL72147 .............7.5" GM ALL72148 .............8.5" GM

GM 7.5"

Pinion Nuts

Part No.

Sets fit 10-bolt with 7.5" ring gear, 1.438" dia. pinion stem and 27-spline pinion. Sets fit 3.23 and numerically higher ratio carriers.

Replace original worn or damaged nuts each time a gear set is changed. Nut secures driveshaft yoke to pinion gear. Part No.

Description

U-bolt kits for 1310 or 1350 series Ujoints secure driveshaft to pinion yoke. Sold in pairs with nuts and lock washers. Part No.

Description

ALL69015 .............U-Bolt Kit, 1310 (3-1/4") Series ALL69016 .............U-Bolt Kit, 1350 (3-5/8") Series

U-Joint with grease fitting and retaining clips fits Allstar steel driveshafts. Joint measures 3-1/4" across and has 1-1/16" caps.

Ford 9" Aluminum Gear Tote ALL14168 Keep Ford 9" third member neat and clean. Built-in handles ease carrying.

Ratio

ALL70116 ......4.10 ALL70118 ......4.56

Sets fit 10-bolt with 8.5" ring gear, 1.625" dia. pinion stem and 30-spline pinion. Part No. ALL69015

Ratio

ALL70120..............3.08 ALL70122..............3.42 ALL70124..............3.73

Part No.

Ratio

ALL70126 ......4.11 ALL70128 ......4.56

Ford 9" Sets fit 10-bolt with 9" ring gear, 1.313" dia. pinion stem and 28-spline pinion. Part No.

1310 Series U-Joint ALL69030

Part No.

GM 8.5"

ALL72155 .............Ford 8.8" And Standard 9" ALL72156 .............GM 7.5 And 8.5

U-Bolt Kits

Ratio

ALL70110..............3.23 ALL70112..............3.42 ALL70114..............3.73

Ratio

ALL70010..............3.50 ALL70012..............3.70 ALL70014..............3.89 ALL70016..............4.11 ALL70018..............4.33 ALL70020..............4.56 ALL70022..............4.71 ALL70024..............4.86 ALL70026..............5.00

Part No.

Ratio

ALL70028 ......5.14 ALL70030 ......5.29 ALL70032 ......5.43 ALL70034 ......5.67 ALL70036 ......5.83 ALL70038 ......6.00 ALL70040 ......6.20 ALL70042 ......6.33 ALL70044 ......6.50

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

53

performance

REAR END ACCESSORIES


performance

REAR END ACCESSORIES Ring And Pinion Installation Kits

Spools

Allstar Ring and Pinion Installation Kits are available with or without bearings. Kits contain all the hard-to-find individual parts for a quick, trouble-free installation.

Replace a troublesome positive traction unit with a high quality Allstar spool. Substantially lighter than conventional carriers, spools deliver equal power to both rear ALL68060 wheels. Ultra-lite steel spools have more lightening holes and a narrower ring gear flange than standard units.

Bearing Kits Include: • Pinion And Side (Carrier) Bearings • Pinion Seal • Pinion Depth Shims • Adjustable Side (Carrier) Shims • Crush Sleeve (Spacer) • Pinion Nut • One Ounce Tube Of Silicone Or Gasket • Gear Marking Compound • Ring Gear Bolts

Shim Kits Include: • Pinion Seal • Pinion Depth Shims • Adjustable Side (Carrier) Shims • Crush Sleeve (Spacer) • Pinion Nut • One Ounce Tube Of Silicone Or Gasket • Gear Marking Compound And Ring Gear Bolts Bearing Kit

Shim Kit

Application

General Motors Pass And Mini Trucks S-10 And Mini Blazer With 7-1/2" ALL68515 ALL68615 GM Ring, 1981-2001 And GMC 12-Bolt Truck And Blazer 8-7/8" Dia. ALL68518 ALL68618 Chevy Ring, 1964-82 Truck, Rear Axle, 8.50" 10-Bolt Carrier With 10-Bolt ALL68521 ALL68621 Light Cover, 30-Spline Pinion 1971-84 Pass. And G-10 Van, 10-Bolt 8.20" Dia. Ring, – ALL68622 Chevy 1964-72 Partial Chrysler Corp., 8-3/4" “Pig” type, 1-7/8" Dia. Tapered PinALL68531 ALL68631 Chrysler ion, 489 Casting (Lg. #9 On Left Side of Casting) 1969-73 Chrysler Corp., 8-3/4" “Pig” Type, 1-3/4" Dia. Pinion ALL68537 ALL68637 Straight Stem, 742 Casting (Lg. #2 on Left Side of Casting) 1957-68 Ford Motor Co. ALL68509 Ford 9" 3.062" Bearing, Complete Kit With Solid Spacer ALL68510 ALL68610 Ford 9" 2.893" Bearing, Complete Kit With Solid Spacer 9" “Pig” Uses LM102910 Side Bearings 2.893" ALL68511 ALL68611 Ford 28-Spline Axle 9" “Pig” Uses LM603011 Side Bearings 3.062" ALL68512 ALL68611 Ford 31-Spline Axle Ford, Salisbury Type With 10-Bolt Cover, ALL68513 ALL68613 8.8" Mustang 1985-98, Lt. Truck And Bronco 1981-98 9" With 3.062" Carrier Bearing, Crush Sleeve, DayALL68538 ALL68611 Ford tona Pinion, Std. And Pro Gear With 28-Spline Pinion Ford 9" With 3.062" Carrier Bearing, Solid Spacer, Daytona ALL68539 – Pinion, Std. And Pro Gear With 28-Spline Pinion Ford 9" With 3.250" Carrier Brng., No Crush Sleeve Or ALL68540 – Spcr., MW Or Strange Pinion Support, Std. And Pro Gear With 28-Spline Pin. Ford 9" With 3.250" Carrier Brng., No Crush Sleeve Or ALL68541 – Spcr., MW Or Strange Pinion Support, Std. And Pro Gear With 35-Spline Pin. Ford 9" With 3.250" Carrier Bearing, Crush Sleeve, DayALL68542 ALL68611 tona Pinion Support, Std. And Pro Gear With 28-Spline Pinion Ford 9" With 3.250" Carrier Bearing, Solid Spacer, Daytona ALL68543 – Pinion Support, Std. And Pro Gear With 28-Spline Pinion – ALL68639 8" Ford “Pig” Type, All Dana ALL68533 ALL68633 Dana-Spicer Model 44, All 1967-97 ALL68534 ALL68634 Dana-Spicer Model 60 And 61, All 1966-98

54

Part No.

Description

Ford 9" Steel Spools

ALL68060..............28-Spline, 8.9 Lbs. ALL68062..............28-Spline, Ultra-Lite, 6.2 Lbs. ALL68063..............28-Spline, Ultra-Lite Scalloped, 5.8 Lbs. ALL68064..............31-Spline, 8.6 Lbs. ALL68066..............31-Spline, Ultra-Lite, 6.0 Lbs. ALL68067..............31-Spline, Ultra-Lite Scalloped, 5.5 Lbs. ALL68070..............35-Spline, For 3.250" Case, 7.6 Lbs. ALL68072..............35-Spline, For 2.893" Or 3.062" Case, 7.9 Lbs. ALL68074..............40-Spline, For 3.250" Case, 7.9 Lbs. Aluminum Spools

ALL68110..............Ford 9", 28-Spline Axles, 4.9 Lbs. ALL68111..............Ford 9", 31-Spline Axles, 3.7 Lbs. ALL68114..............Q/C For Winters, 31-Spline, 2.030" Bearings ALL68115..............Q/C For Franklin, Tiger And Richmond, 31-Spline, 2" Bearings

ALL68110

Mini Spools Mini spools are precisely machined for proper fit, and then heat treated. Cross pins must be ordered separately. Available in the following styles:

ALL68122

ALL68164

• 1957-87 Ford 9" Rear Ends With 3/4" Cross Pin And Either 28- Or 31-Spline Axles • 1981-94 Ford 8.8" Rear Ends With 28-Spline Axles • 1970-76 GM 10-Bolt With 8.5" Dia. Ring Gear, 28-Spline Axles And Non-Positive Traction Case • 1964-72 GM 10-Bolt With 8.2" Dia. Ring Gear, 28-Spline Axles And Non-Positive Traction Case • t1965-76 GM 12-Bolt With 8.875" Dia. Ring Gear, 30-Spline Axles And NonPositive Traction Case • 1976-88 GM 7.5" With 7.5" Or 7.625" Ring Gear, 26-Spline Axles And Non-Positive Traction Case Part No.

Description

ALL68121..............Ford 9", (Lightweight) 28-Spline ALL68122..............Ford 9", (Lightweight) 31-Spline ALL68160..............GM 10-Bolt (8.5" Ring Gear), 28-Spline ALL68162..............GM 10-Bolt (8.2" Ring Gear), 28-Spline ALL68164..............GM 12-Bolt (8.875" Ring Gear), 30-Spline ALL68166..............GM 7.5" (Ring Gear), 26-Spline ALL68168..............Ford 8.8", 28-Spline

Cross Pins Part No.

ALL68120

Description

ALL68120..............Ford 8.8" And 9" Mini Spools (3/4") ALL68161..............GM 10-Bolt (8.5" Ring Gear) Mini Spools ALL68163..............GM 10-Bolt (8.2" Ring Gear) Mini Spools ALL68165..............GM 12-Bolt (8.875" Ring Gear) Mini Spools ALL68167..............GM 7.5" (Ring Gear) Mini Spool

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


ELECTRICAL SYSTEM ACCESSORIES

Street Performance Mini-Starter ALL80525

ALL72040

Small block Chevy clockable starter offers twelve mounting positions and is a good choice for street engines including crate motors. Starter has 1.4kw permanent magnet and weighs only 7.5 lbs. Clears most kickout oil pans and works with 153-tooth and 168-tooth flywheels or flexplates. Use with compression ratios up to 10.5:1.

Studs secure the center section to the housing and are installed by pulling through with a nut for a press fit. 3/8"-24 threads. Sold in packs of ten.

Ford 9" Backing Plate T-Bolts ALL72042 Unique 3/8"-24 x 1-1/4" T-head bolts are required to mount backing plates and brackets to late model Torino 9" housing ends. Eight to a pack.

SB Chevy Mini-Starter ALL80520

ALL36110

It’s smaller, lighter and offers several mounting options. Perfect for vehicles with clearance problems in the chassis or around header pipes. SB Chevy 153- and 168-tooth applications. Starter has 1.4kw permanent magnet, weighs just 9.6 lbs. and includes bolts and shims.

Aluminum fill tank has a -10AN outlet and recessed flange for flush mounting on rear deck.

Part No.

Ford 9" Gasket ALL72044 Paper gasket is precision die-cut to ensure a leak free seal.

Remote Fill Tanks

Replacement Parts

ALL36111 Designed for filling rear end, tank has a -10AN outlet and recessed mounting flange. Also has 3/8"NPT bung to accept a breather.

Description

ALL80521..............Starter Solenoid ALL80522..............Starter Drive Assembly ALL80523..............Starter Pinion Note: Also fits BB Chevy ALL36110 ALL36111

GM Single Wire Alternators

ALL80500

Mini Breather Tanks Small capacity, spun aluminum tank will vent dry sump tank, transmission or rear end. Tank includes 1/4"NPT on bottom and a clamp style bracket for mounting to chassis tubing. Part No.

Description

ALL36140..............Tank For 1-1/2" Tubing ALL36141..............Tank For 1-3/4" Tubing

Clamp-On Breathers Breathers are easily mounted to either 1-1/2" or 1-3/4" tubing. Breathers are 1" tall and 1-3/8" in diameter. Great for use on transmissions, differentials, etc. Bottom fitting is 1/4"NPT. Black anodized finish. Part No.

ALL80501

Completely remanufactured GM Delco single wire alternators are easily hooked-up. Housings are natural finish aluminum. Choose from 63 or 80 amp capacities. Part No.

Description

ALL80500..............63 Amp, Full Size, 10.3 Lbs. ALL80501..............80 Amp, Compact Size, 9 Lbs.

TECH TIP

Starter Troubles? If you’re experiencing starter troubles, try the following: If the pinion moves in and out, the solenoid is OK. If the pinion does not spin, it’s normally the hot feed wire either not having a good contact or not enough voltage from the battery.

Description

ALL36106..............Breather For 1-1/2" Tubing ALL36107..............Breather For 1-3/4" Tubing ALL36103..............Replacement Filter Only

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

55

performance

REAR END ACCESSORIES

Ford 9" Housing Studs


performance

ELECTRICAL SYSTEM ACCESSORIES Gauge Panels

Switch Panels

ALL80114

Pre-wired aluminum panels include gauges, indicator lights and installation template. Choose from Auto Meter Sport-Comp, Ultra-Lite, Pro-Comp liquid-filled, or Stewart Warner 2-5/8" gauges. Panels are available in two-, three- or fourgauge designs. • Two-Gauge Panels Are 4-1/2" Tall x 7-1/4" Long. Gauges: Oil Pressure And Water Temperature • Three-Gauge Panels Are 4-1/2" Tall x 10-1/2" Long. Gauges: Oil Pressure, Water Temperature And Oil Temperature Or Fuel Pressure • Four-Gauge Panels Are 4-1/2" Tall x 13-3/4" Long. Gauges: Oil Pressure, Water Temperature, Oil Temperature And Fuel Pressure. Note: Fuel pressure isolator such as Autometer ATM5282 or Mallory MAL29806 is always recommended when mounting a fuel pressure gauge inside vehicle. Part No.

ALL80140/ALL80150

ALL80141

ALL80142

ALL80146

Designed for racing, panels have well marked switches and indicator lights and are completely wired for installation. Part No.

ALL99066

Description

ALL80140..............Panel Without Light ALL80141..............Panel With Flip-Up Cover ALL80142..............Panel With Light ALL80146..............Panel With Two Switches ALL80150..............Magneto Ignition Panel

ALL99068

Replacement Components

ALL99066..............Ignition Indicator Light Red ALL99067..............Switch For Ignition And Accessory ALL99068..............Switch Cover Weatherproof ALL99069..............Starter Button

ALL99067 ALL99069

Description

ALL80100..............Stewart Warner 2-Gauge (OP/WT) ALL80102..............Stewart Warner 3-Gauge (OP/WT/OT) ALL80103..............Stewart Warner 3-Gauge (OP/WT/FP) ALL80110..............Auto Meter Sport-Comp 2-Gauge (OP/WT) ALL80112..............Auto Meter Sport-Comp 3-Gauge (OP/WT/OT) ALL80113..............Auto Meter Sport-Comp 3-Gauge (OP/WT/FP) ALL80114..............Auto Meter Sport-Comp 4-Gauge (OP/WT/OT/FP) ALL80115..............Auto Meter Ultra-Lite 2-Gauge (OP/WT) ALL80117..............Auto Meter Ultra-Lite 3-Gauge (OP/WT/OT) ALL80118..............Auto Meter Ultra-Lite 3-Gauge (OP/WT/FP) ALL80119..............Auto Meter Ultra-Lite 4-Gauge (OP/WT/OT/FP) ALL80120..............Auto Meter Pro-Comp Liquid-Filled 2-Gauge (OP/WT) ALL80122..............Auto Meter Pro-Comp Liquid-Filled 3-Gauge (OP/WT/OT) ALL80123..............Auto Meter Pro-Comp Liquid-Filled 3-Gauge (OP/WT/FP)

Battery Disconnect Switch Shut down the electrical and charging system with a quick twist of the knob. Switches are available with brightly screen printed aluminum mounting panel, or on/off decal for mounting through body panel. Part No.

Replacement Components

ALL80125..............2-Gauge Mounting Panel, 4-1/2" x 7-1/4" (OP/WT) ALL80126..............3-Gauge Mounting Panel, 4-1/2" x 10-1/2" (OP/WT/OT) ALL80127..............3-Gauge Mounting Panel, 4-1/2" x 10-1/2" (OP/WT/FP) ALL80128..............4-Gauge Mounting Panel, 4-1/2" x 13-3/4" (OP/WT/OT/FP) ALL80130..............Stewart Warner Oil Pressure Gauge ALL80131..............Stewart Warner Oil Temperature Gauge ALL80132..............Stewart Warner Water Temperature Gauge ALL99057 ALL80133..............Stewart Warner Fuel Pressure Gauge ALL80134..............Fuel Pressure Gauge Sport Comp 15 PSI ALL80135..............Fuel Pressure Gauge Ultra Lite 15 PSI ALL80136..............Fuel Pressure Gauge Pro Comp 15 PSI ALL99061 ALL99057..............Replacement Water Temperature Switch 235°F ALL99058..............Replacement Fuel Pressure Switch 4 PSI ALL99056..............Oil Temperature Switch 280°F ALL99059..............Oil Pressure Switch 20 PSI ALL99058 ALL99060..............Warning Light Housing Kit ALL99061..............Warning Light Socket Nut ALL99062..............Warning Light Amber ALL99063..............Warning Light Blue ALL99060 ALL99064..............Warning Light Green ALL99065..............Warning Light Red

ALL80156

ALL80158

Description

ALL80156..............Switch And On/Off Decal ALL80158..............Switch And Aluminum Mounting Panel ALL80159..............Switch And Aluminum Mounting Panel, Two Accessory Posts For Cars With Alternator ALL99045..............Replacement On/Off Decal

Coil Mounts Use this lightweight, anodized aluminum bracket to mount ignition coil to chassis quickly and securely. Part No.

ALL81322

Description

ALL81320..............Mount For 1-1/2" Tubing ALL81322..............Mount For 1-3/4" Tubing ALL81324..............Flat Mount

ALL81324

ALL99065

56

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Battery Boxes

Battery Quick Disconnects

Universal, lightweight steel battery boxes may be welded or bolted to the frame. Boxes are available in two sizes and include hold down hardware. Part No.

Disconnects provide a connection for battery charging, or for quick battery changes. Prevent accidental reverse polarity. Choose from 50 or 175 amp ratings. Sold in pairs with cable terminals.

Description

ALL76100..............Full Size, 11-3/4" Wide x 7-1/4" Deep ALL76101..............Short Style, 9-1/2" Wide x 7-1/4" Deep

Part No.

Description

ALL76320..............50 Amp Gray Disconnects, 1-Pair ALL76322..............175 Amp Red Disconnects, 1-Pair Replacement Components

Lightweight Battery Box ALL76102

ALL76321..............6 Gauge Terminals For ALL76320, 1-Pair ALL76323..............2 Gauge Terminals For ALL76322, 1-Pair

Designed to be quickly bolted in. Box is 11" wide x 7" deep and includes 3/8" hold down hardware. Zinc plated for corrosion resistance.

Battery Cable Kits Everything needed to connect a top post style battery to starter. The cable in these kits is fine stranded, rope-lay copper for the best current carrying capabilities.

Stainless Steel Drop-Out Battery Box ALL76105

ALL76110 And ALL76114 Include: • 15 Ft. Red Positive Cable • 2 Ft. Black Ground Cable

The perfect battery box where battery mounts under floor. Eases battery service and replacement. Box is 10-1/2" wide, 7" deep, and 9-1/2" tall and will accept most standard batteries.

• 1 Pr. Battery Terminals • 4 Pr. Crimp Power Rings

ALL76112 Includes: • 25 Ft. Red Positive Cable • 8 Ft. Black Ground Cable • 7 Pr. Crimp Power Rings Part No.

• 7 Pr. Shrink Tubing • 2 Pr. Battery Terminals

Description

ALL76110..............2 Gauge Kit (15' Positive Cable), Works With 1 Battery ALL76112..............2 Gauge Drag Kit (25' Positive Cable), Works With 2 Batteries ALL76114..............4 Gauge Circle Track Kit (15' Positive Cable), Works With 1 Battery

Drag Style Race Battery Box ALL76106

Gold Battery Terminals

Drag race style battery box may be welded or bolted to any chassis. Lightweight box is 7-1/4" wide x 10-1/4" deep, and includes hold down.

Machined from solid brass stock and 24k gold plated for maximum conductivity. Top mount terminals allow attachment of battery cable power rings while side mount terminals include nut and lock washers for 5/16" studs. Terminals are perfect as upgrades for battery cable kits. Sold in pairs.

Battery Charging Posts ALL76139 Posts mount through a body panel to provide remote access to battery terminals for quick, easy, battery charging. Color coded caps are a safety feature to prevent crossed cables. Part No.

Part No. ALL76140

ALL76141

Quick Connect Battery Charging Posts Two-piece, color-coded connectors make safe, out-of-car connection to battery charger quick and easy. Female ends connect to battery cables and pass through a body panel. Male ends of connectors fit on battery charger cables. Shafts are tapered for tight, secure connections. Part No.

Description

ALL76300..............Red ALL76310..............Black

ALL76120

ALL76122

Gold Cable Ends

Description

ALL76140..............Red Post Only ALL76141..............Black Post Only

Description

ALL76120..............Top-Mount ALL76122..............Side-Mount

24k gold plated connectors, machined from solid brass stock, offer the best electrical conductivity and resistance to corrosion. Closed-end provides waterproof connection. Available in 2 or 4 gauge with a 5/16" mounting hole. Sold in pairs. Part No.

Description

ALL76124..............2 Gauge ALL76126..............4 Gauge

Ring Terminals Use to repair or build custom length battery cables, or when installing a battery disconnect switch. Terminals may be crimped or soldered to wire. Sold in pairs with heat shrink sleeving for a waterproof connection. Part No.

Description

ALL76116..............2 Gauge 5/16" Hole ALL76117..............2 Gauge 3/8" Hole ALL76118..............4 Gauge 5/16" Hole ALL76119..............4 Gauge 3/8" Hole

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

57

performance

ELECTRICAL SYSTEM ACCESSORIES


performance

ELECTRICAL SYSTEM ACCESSORIES Solder Slugs

Crimping Pliers

Use solder slugs to secure ring terminal ends to battery cable. Individual pieces are the correct amount of solder to be used for each size of cable. Sold in packs of 10. Part No.

Description

ALL76131..............Slug For 2 Gauge Terminals ALL76132..............Slug For 4 Gauge Terminals

ALL76131

ALL76132

How To Use Solder Slugs:

ALL76220

1. Strip cable so the exposed copper reaches the bottom of the battery terminal. 2. Place the proper size slug in the battery terminal and secure terminal in vice. 3. Heat the base of the battery terminal with the slug inside using a propane torch or similar tool. As the battery terminal is heated, gently press cable into terminal. Allow time for the connection to cool. 4. Protective clothing and eyewear should be worn at all times.

Pro style pliers have a unique ratcheting feature to perform professional crimps on 22-10 gauge standard and reinforced terminals. Standard pliers strip insulation from solid and stranded wire, crimp solderless and ignition connectors, and even cut #4 to #10 screws. Part No.

ALL76135

Universal Wire Connectors

Excellent for permanently crimping standard cable ends to battery cables.

Molded connectors include a male and female end, joined by a loop of 16 gauge primary wire which may be cut to length. Useful for switch and gauge panels or accessories that are disconnected frequently.

Firewall Cable Bushing Mounts securely to the firewall and locks onto the wire for a waterproof and vibration proof seal.

Part No.

ALL76137..............2 Gauge ALL76138..............4 Gauge

Battery Cable Thru Stud

Starter Solenoid ALL76203

ALL76142

Ford-style solenoids are perfect for use with high torque racing starters. Flat base eases mounting, and a remote under-hood starter switch or timing light hook-up can be easily adapted. Solenoid is offered separately, or may be ordered with installation kit, which incudes the wiring, terminals and hardware for installation.

Run battery cable through firewall or any body panel safely. 3/8"-16 thread.

Terminal Kit ALL76224 An 82-piece terminal kit with a generous supply of the most commonly used connectors for automotive wiring. A sturdy plastic case with divided compartments keeps connectors organized.

Solenoid And Installation Kit ALL76202

Each Kit Includes:

58

16-14ga. 7 Butt Connectors 7 Ring Terminals #8 7 Ring Terminals #10 5 Ring Terminals 1/4" 7 Female Blade 1/4" 7 Male Blade 1/4"

Description

ALL76231..............One Wire With 12" Loop ALL76232..............Two Wire With 12" Loop ALL76233..............Three Wire With 48" Loop ALL76234..............Four Wire With 48" Loop ALL76235..............Five Wire With 48" Loop

Description

22-18ga. 7 Butt Connectors 7 Ring Terminals #6 7 Ring Terminals #8 – – –

Description

ALL76220..............Pro Crimp Pliers ALL76222..............Standard Crimp Pliers

Impact Crimper

Part No.

ALL76222

12-10ga. 7 Butt Connectors 7 Ring Terminals #10 7 Ring Terminals 3/8" – – –

Relocate starter solenoid away from direct engine heat to provide easy access and eliminate hot start problems common on General Motors vehicles. An under hood starter switch can also be added. Includes standard duty, Ford-style solenoid, mounting screws, terminals and wiring kit. Part No.

Description

ALL76201..............Installation Kit Only

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Oil Eater

Mud-X Concentrate ALL78230 Mix concentrate with up to ten quarts of water to produce a coating that prevents mud, dirt, oil, rubber and exhaust residue from sticking to body panels. Safe for metal, plastic, rubber, and painted surfaces. One quart container.

Mud-X Cleaner

Ground Shipment Only

ALL78232 ALL78211

ALL78213

ALL78212

The cleaner/degreaser that really works! Clean shop floors, degrease engine bays or trailer floors. Offered in a 32 oz. spray bottle or 1 gallon container. Convenient foam gun sprayer is the quickest and easiest way to dispense Oil Eater. Fill sprayer with Oil Eater, connect to a garden hose, select the desired mixture setting from 12:1 to 128:1 and spray. The sprayer creates a foaming action which sticks to surfaces. Part No.

Fogging Oil

Description

ALL78213..............32 Oz. Spray Bottle ALL78211..............1 Gallon Container ALL78212..............Foam Gun Sprayer

AP PRF Brake Fluid ALL78116

Cleans and shines plastic, polycarbonate, chrome, fiberglass, paint, vinyl and leather and leaves an invisible coating that protects surfaces and repels dirt, dust, fingerprints, smudges and bugs. Spray it on and wipe it off. Excellent anti-fog coating for helmet shields.

ALL78220

Ground Shipment Only

Developed for extreme, high temperature racing conditions (dry boiling point of 608°F). Exceeds DOT 4 specifications. Sold in 16.9 oz. bottle.

AP 600 Hi-Temp Racing Brake Fluid ALL78108 Designed for extreme, high temperature racing conditions with a dry boiling point in excess of 572°F. Exceeds DOT 3 standards. 16.9 oz. bottle. Ground Shipment Only

Ground Shipment Only

Spray aerosol lubricant (with special additives) into the intake and spark plug holes to coat and lubricate the cylinders, valves and valve seats. Prevents horsepower-robbing corrosion and eliminates scuffing at start-up after periods of storage. May be used in all 2- or 4-cycle, carbureted or fuel injected gasoline engines in cars, trucks, motorhomes, ATV’s, etc. Sold in 12 oz. cans.

Castrol SRF Brake Fluid ALL78115 Castrol SRF brake fluid has a wet boiling point of 518°F (270°C) which exceeds DOT 3 and 4 standards. Do not mix Castrol SRF and other brake fluids, as this will reduce the benefits of Castrol SRF. Sold in 1 liter cans (33.8 oz..)

Ground Shipment Only

Towels Soft, absorbent terry cloth towels can be used for polishing, wiping up spills or general detailing. Shop towels belong with every tool box as well as in the shop and garage. Part No.

Description

ALL12010..............Red Shop Towels, 25-Pack ALL12012..............White Terry Towels, 12-Pack

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

59

performance

CHEMICALS, ADDITIVES AND CLEANERS


performance

Suspension Tubes

Super Cells

Gold anodized aluminum tubes are threaded RH on one end and LH on the other, with a wrench flat on one end.

Series 100 Super Cells meet FIA FT3 specs. and have standard three layer fabric bladders, regular fillers with flap valves, and chrome caps. Series 200 Super Cells meet FIA FT3.5 specs. and have heavy duty rubberized fabric bladders and 45 degree quick fill flapper valve. Both styles are equipped with -8AN pickups, two Duck Foot fuel traps, foam baffling, and rugged 20 gauge steel containers. For use with gasoline only.

12000 Series: 7/8" Dia. x .156 Wall, Tapped 5/8" RH and LH 12100 Series: 1" Dia. x .156 Wall, Tapped 3/4" RH and LH 12000 Series

12100 Series

Part No.

Length

AAA12000-5.5 ..........................5.5" AAA12000-8 .............................. 8" AAA12000-9 .............................. 9" AAA12000-10 ...........................10" AAA12000-11 ...........................11" AAA12000-12 ...........................12" AAA12000-13 ...........................13" AAA12000-14 ...........................14" AAA12000-15 ...........................15" AAA12000-16 ...........................16" AAA12000-17 ...........................17" AAA12000-18 ...........................18"

Part No.

Length

AAA12100-13 .............................13" AAA12100-14 .............................14" AAA12100-15 .............................15" AAA12100-16 .............................16" AAA12100-17 .............................17" AAA12100-18 .............................18" AAA12100-19 .............................19" AAA12100-20 .............................20" AAA12100-21 .............................21" AAA12100-22 .............................22" AAA12100-23 .............................23" AAA12100-24 .............................24"

Unthreaded 6' Lengths To Make Your Own Tubes Part No.

Description

Sports Cells Cells meet FIA FT3 specs. and offer maximum protection at a modest cost. Cells are fully assembled with seamless molded bladders, foam baffling and precision fill plate. Other features include fill valves, vent check valves, twin -8AN fuel pickups and powder coated, 20 gauge steel containers. For use with gasoline or methanol.

AAA12050-72 .................1" Diameter With .225" Wall For 5/8" Heims

ATL Fuel Cell Specifications 2-1/2" Coil-Over Kits Made of aluminum, these kits have slotted tops and are available for Carrera/QA1, Koni, Pro-Shock, Bilstein and others. Part No.

Description

AAA12400 ............Carrera/QA1 5" Coil-Over Kit AAA12405 ............Carrera/QA1 7" Coil-Over Kit AAA12420 ............Pro Shock 5" Coil-Over Kit AAA12425 ............Pro Shock 7" Coil-Over Kit AAA12432 ............Koni 5" 30 Series Coil-Over Kit AAA12433 ............Koni 7" 30 Series Coil-Over Kit AAA12435 ............Bilstein 5" Series Coil-Over Kit AAA12436 ............Bilstein 7" Coil-Over Kit AAA12441 ............Monroe/AFCO 7" Coil-Over Kit AAA12445 ............Carrera/QA1 2-1/2" Coil-Over Kit, 61/81 Series Replacement Components AAA12450 ............5" Aluminum Sleeve, Carrera/QA1, Pro AAA12455 ............7" Aluminum Sleeve, Carrera/QA1, Pro AAA12460 ............Aluminum Adjusting Nut AAA12465 ............Slotted Coil Top, Carrera/QA1, Bilstein AAA12490 ............Coil Top Clip AAA12495 ............Snap Ring

Rod End Bushings Bushings reduce the diameter of the rod end bolt hole to allow use of existing mount when the mounting hole does not match. Sold individually. Part No.

Size

AAA10460 ............1/2" to 3/8" AAA10465 ............5/8" to 1/2" AAA10470 ............3/4" to 1/2" AAA10475 ............3/4" to 5/8" Reducer Bushing Assortment AAA10480

Assorted Sizes -10 pieces

Part No.

Gal.

Style Cell

Bladder

Fill Plate

ATLSP112 ATLSP115 ATLSU115 ATLSU117-FV ATLSP122B ATLSP122C ATLSU122C ATLSU222C ATLSU222E ATLSP126CLM-W ATLSP132BLM

12 15 15 17 22 22 22 22 22 26 32

Sport Sport 100 Series Super 100 Series Super Sport Sport 100 Series Super 200 Series Super 200 Series Super Sport Sport

Hard Rubber Hard Rubber Fabric Fabric Hard Rubber Hard Rubber Fabric HD Fabric HD Fabric Hard Rubber Hard Rubber

Straight w/Cap Straight w/Cap Straight w/Cap Straight w/Cap Straight w/Cap Straight w/Cap Straight w/Cap 45° Quick Fill 45° Quick Fill Straight w/Cap Straight w/Cap

Length Width Height

20.4" 24.4" 24.4" 34" 25" 34" 34" 34" 33" 25.25" 19"

17.75" 17.75" 17.75" 17.5" 16.75" 17.5" 17.5" 17.5" 17" 16.85" 26.12"

“Sports-LM” Fuel Cells Cells have molded, seamless rubber bladders. Includes a -10AN pickup, internal foam baffling, a 20 gauge powder coated steel container, grade 8 hardware, fill plate, “flap valve” and ball type rollover valve. Meets FIA FT3 specs. Part No.

Description

ATLSP126CLM-W .........26 Gallon, White Container ATLSP132BLM ...............32 Gallon, Red Container ATLSP132BLM-W..........32 Gallon, White Container

Duck Foot Fuel Trap Pickup lays flat against the bottom of the fuel cell. The Duck Foot retains fuel around the pickup strainer for constant feed to the engine. Part No.

Description

ATLTF239..................................-6AN ATLTF240..................................-8AN

60

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

9.5" 9.5" 9.5" 7" 13.62" 9.5" 9.5" 9.5" 9.25" 17.25" 17.18"


HEI Control Module

The perfect replacement for stock distributors, it has all new components, including housings, male tower caps, brass contacts, balanced rotors and iron or steel gears. Fits all Chevy V8’s (except 348 and 409) and plugs into factory connectors.

Module fits stock and modified 1974-87 GM HEI distributors. Solid state electronics promote reliable, high coil output while dwell control ensures long, consistent coil charging. Current control circuit protects against coil overheating.

ACL35361

Note: When installing HEI control modules, always use Thermal Joint Compound to minimize module temperature.

Performance Replacement Chevy HEI Distributor

GM HEI Cap and Rotor Kits

Plug-in replacement distributor has all new components including vacuum advance, high performance electronics, centerless ground shaft, iron or steel distributor gear, male tower distributor cap with brass contacts, and a balanced rotor. Fits all Chevy V8’s (except 348 and 409).

Caps and Rotors are made from 60 KVrated tan alkyd molding compound for superior protection from “arc-thru” and crossfire. Caps are stress-relieved for dimensional stability, fitted with high conductivity, corrosion-resistant brass inserts and stainless steel rotor springs for unrestricted spark energy flow.

Part No.

Part No.

Description

ACL59107 .............Chevy V8 HEI Distributor ACL59107C ..........Chevy V8 HEI Distributor, w/In-Cap Ignition Coil

Super Stock Coil Accel Super Stock Coil produces a long, intense spark for improved starting, acceleration and throttle response. Hardware and heavy duty coil wire boot are included. Part No.

Description

ACL8140................Bright Yellow Finish ACL8140C .............Hi-Luster Chrome

8.8mm 300+ Race Wire Ultra-low resistance wires deliver more spark current to the plugs. A much larger conductor is spiral wound around the core, effectively reducing internal resistance for a 325% increase in current flow. Part No.

Super Coil ACL140001 With over 50,000 volt capability, the Super Coil produces all the spark a racing engine needs. Extremely reliable, even in high temperature engine compartments.

HEI Super Coils Accel HEI Super Coil provides increased spark for crisper acceleration and better top end performance. High-strength, molded case is finned for maximum heat dissipation. Part No.

Description

ACL140003...........HEI Super Coil w/Red and Yellow Wires (Most Popular) ACL140005...........HEI Super Coil w/Red and White Wires Note: HEI Super Coil wires must match original HEI coil wire colors.

Description

ACL8122................GM HEI Performance Tan Kit ACL8123................GM HEI Heavy Duty Black Kit

Application

ACL7030................Universal 90° w/o HEI ACL7031................Universal 90° w/HEI ACL7032................Universal Straight w/o HEI ACL7033................Universal Straight w/HEI ACL7042................SBC w/o HEI, Wires Under Exhaust ACL7044................SBC w/o HEI, Wires Over Valve Cover ACL7048................SBC w/HEI, Wires Over Valve Cover Up To 1980 ACL7049................SBC w/HEI, Wires Over Valve Cover 1980-Up ACL7050................SBC w/HEI, Wires Under Exhaust ACL7047................SB Ford w/Female Post Distributor Cap ACL7054................SB Ford w/Male Post Distributor Cap Custom Tailored Race Applications w/Pro Sleeve ACL7001................SBC w/HEI, Under Headers ACL7004................SBC w/HEI, Over Valve Covers ACL7006................SB Ford Windsor, Over Valve Covers

U-Groove Spark Plugs The U-Groove is the only spark plug that is specifically manufactured for high performance and racing engines. It features the patented U-Groove ground electrode which develops a larger spark for more complete combustion and a copper core center electrode. Also available is the “shorty” plug, which is 1/4" shorter for more header to spark plug clearance.

Call for applications.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

61

performance

Blueprint Chevy HEI Distributor ACL9107


performance

GM 4.3 V6 and Small Block Chevrolet V8 into GM S-10 and S-15 4WD Motor Mounts

Ford 2WD Ranger/Bronco II V8 Conversion Motor Mounts

Mounts will make a difficult swap easier. There are many items that must be considered before the swap begins. For 1982-83 vehicles, the manual transmission is not recommended, but1984 and newer trucks have T-4 or T-5 transmissions which will hold up quite well. Vehicles with 700R-4 automatics require the transmission case to be changed to one originally coupled to the same bolt pattern as the engine being swapped. If changing to an automatic from a manual transmission, an adapter plate and linkage bracket must be purchased from a GM dealer. Mounts must be used with original GM V-6 frame mounts. Trucks originally equipped with four-cylinder engines must be changed over to the V6 frame mounts and the transmission must be changed as well. Oil pan will depend upon engine's year and dipstick location. A remote oil filter system must be used. A new computer PROM may be needed or the wiring must be bypassed around the stock PROM. A Turbo 400 may be used in this swap, but it must be adapted to the S-10 transfer case.

Kit requires a dual sump oil pan and matching oil pickup tube, both available separately*. Oil filter must be removed replaced with a bypass adapter and a remote filter.

Part No.

ADV713015A

Transmissions recommended include the Ford Top Loader, the T-5 or the Ford C4 automatic. Other items needed include a 4-core radiator and a transmission cooler (if using an automatic). Driveshaft modifications may be necessary. Note: Any engine swap can become an expensive proposition before it’s completed. Advance Adapters recommends thoroughly researching the intended swap and lining up all needed components before dismantling the vehicle. Booklets are available which completely outline all the steps and parts needed for any particular swap. These are the same booklets that are included in the swap kits. Call us for more information. Advance Adapters manufactures a large variety of kits to swap engines, transmissions and transfer cases in all of the most popular trucks and sport utility vehicles. We can special order any kit.

Application

ADV713107 ................................. Chevy V8 to 2.8L Stock Frame Mounts ADV713123 ................................. Chevy V8 to stock 4.3 V6 Motor Mounts

GM 4.3 V6 and Small Block Chevrolet V8 into GM S-10 and S-15 2WD Motor Mounts Mount 4.3 V6 or small block Chevy V8’s into 1984 and newer 2 wheel drive “S” Series trucks. Conversion is quite involved and requires additional parts. Consider final engine location, transmission , driveshaft modifications, and computer compatibility. The mounts in this kit are adjustable laterally and vertically. Modifications to stock mounts may be needed . There are five transmission choices: Turbo 350, Turbo 400 and Turbo 700R-4 automatics, and the T-4 and T-5 manual transmissions. T-4 and T-5 manual transmissions with a hydraulic clutch control (recommended by Advance) require an ‘89 Chevy truck bellhousing with built-in slave cylinder. The bellhousing kit is offered as a complete assembly (Advance 712547) with bellhousing, release lever, slave cylinder, release bearing, ball pivot, spring and hose. Automatic transmission conversions other than Turbo 350 with 9" tailshaft may require driveshaft modifications. Will require that the driveshaft be shortened. Most S-10/S-15’s are computer controlled and PROM modifications or replacement may be required. Part No.

Application

ADV713111 .................................Chevy V8 to 2.8L Stock Frame Mounts ADV713123 .................................Chevy V8 to stock 4.3 V6 Motor Mounts

62

Carbureted Adjustable Regulator AFS13201 Ideal for circle track applications fitted with a high pressure mechanical or belt drive fuel pump. Regulator has -6AN inlet and outlet ports and is adjustable from 5-12 PSI for exceptional flow, quick response and less pressure creep.

Pro Series Fuel Filter AFS12302 Electroless nickel finished filter is 7" long x 2-1/2" diameter. 100 micron cleanable, stainless steel element and massive -12AN ports offer superior protection and performance.

Billet Inline Fuel Filter AFS12304 High flow inline filter has -10AN ports and installs between the fuel cell and pump. Filter has a reusable 100 micron stainless steel element and measures 5" long x 2" diameter.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Power Valve Block-Off Plug

Reusable white nylon washers will not absorb fuel or separate. 18 per package.

Blocks circuit on applications not using a power valve. An increase of 6 to 8 jet sizes is recommended to compensate for the loss of enrichment.

AED5086

See Through Bowl Sight Plugs AED5170 Make safe, quick and easy float level adjustments. Clear acrylic material plugs allow viewing float level without removal. Sold per pair.

AED5560 Tune accelerator pump volume and fuel delivery rate. Includes five pump cams.

Linkage and Spring Brackets

Carburetor Kits

Purple anodized aluminum linkage and return spring brackets will clean up any engine compartment. Kits contain all hardware for installation. Part No.

Description

AED6600 ...............4150 Chevy Throttle and Spring Bracket AED6601 ...............4150 Ford Cable Throttle and Spring Bracket

Power Valves The highest quality power valves available for Holley carburetors. All power valves listed are high flow and available in several vacuum ratings. Power valves for use with alcohol are also available. Vacuum Rating

Gas Part No.

Alcohol Part No.

2.5" 3.5" 4.5" 5.5" 6.5" 8.5"

AED5025 AED5035 AED5045 AED5055 AED5065 AED5085

AED5025A – – – AED5065A –

Hi-Flow Accelerator Pump Nozzle Screw AED5550 Hi-Flow, hollow discharge nozzle screws increase pump volume. Sold individually.

Accelerator Pump Diaphragms High quality replacement diaphragms are engineered for long, leakproof life. Description

AED5335 ...............30cc Diaphragm AED5337 ...............50cc Diaphragm

Base Gaskets AED5850 Thick, high quality gaskets fit all standard base 4-bbl. carbs. Ten per package.

Fuel Pressure Gauge Small, 1-1/2" diameter gauges are ideal for mounting in-line or on fuel pressure regulators. Chrome plated, shock resistant, stainless steel gauges have 1/8" NPT male fittings. Part No.

Description

AED6100 ...............0-15 PSI AED6101 ...............0-15 PSI Liquid-Filled AED6102 ...............0-30 PSI

AED Carburetor Kits, available in two versions, are ideal for rebuilding Holley 2300, 4150 and 4160 series carburetors. Ultimate Performance Kits include all float bowl, metering block and miscellaneous gaskets, accelerator pump diaphragms, needle and seat assemblies and small parts necessary to rebuild carburetor. Pro-Series Kits contain all Ultimate Performance Kit parts along with new bowl and carb screws as well as other small components to make carburetor not only run like new, but look like new again too. Application

AED5025

Part No.

Accelerator Pump Cam Kit

Holley 350-500 CFM 2BBL Holley 390-950 CFM 4BBL, Double Pumper Holley 390-950 CFM 4BBL, Double Pumper/Alcohol Holley 600-950 CFM 4BBL, Vacuum Secondary Holley 650-800 CFM 4BBL, Spread Bore/Dbl. Pumper Holley 650-800 CFM 4BBL, Spread Bore/Vac. Secondary

Ultimate Performance Kit

Pro-Series Kit

AED2300 AED23001 AED4150 AED41501 AED4150A – AED4160 AED41601 AED4165 – AED4175

Needle and Seat Assemblies Viton tipped needle and seat assemblies are offered in .110" (for Holley carbureted gasoline applications under 650 horsepower), and high flow .125" sizes. Stainless steel .150" assemblies are available for alcohol applications where optimum seating and fuel flow is required. Part No.

Description

AED5110 ...............0.110" Viton Needle and Seats, Pair AED5115 ...............0.125" Viton Needle and Seat, Each AED5117 ...............0.150" Stainless Steel (Alcohol) Needle and Seat, Each AED5120 ...............Needle and Seat Hardware Kit, 2 Pair AED5123 ...............Reusable Needle and Seat Gaskets, 4 Pair

Bowl and Metering Block Gaskets Replacement Holley gaskets are available in standard or blue reusable non-stick designs. Non-stick simplifies and eases jet changes. Standard gaskets are sold in packs of ten and non-stick gaskets are sold in packages of five. Part No.

Description

AED5829 ...............Std. Metering Block Gaskets (Holley 108-29), 10 pk. AED5833 ...............Standard Fuel Bowl Gaskets (Holley 108-33), 10 pk. AED5840 ...............Reusable Metering Block Gaskets (Holley 108-29), 5 pk. AED5847 ...............Resuable Fuel Bowl Gaskets (Holley 108-33), 5 pk.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

63

performance

Reusable Bowl Screw Washers AED5410


performance

Brute Force Intake Brute Force is a mandrel-bent aluminum intake that mounts with TIG-welded brackets and fittings to deliver more air to larger displacement engines. Air is drawn from safest and coolest locations and, thanks to resonance tuning by AEM engineers, is directly routed to the intake valves to create more horsepower and torque. A powder-coated heat shield shrouds the filter from engine heat and road dirt. The kit includes a dry filter element and hardware and is covered by a lifetime guarantee. Kits come in a polished tube or silver tube. Please add "P" for polished or "C" for silver to part number. Model

Year

Engines

AEM21-8013DP

Model

Year

"F" Series "F" Series Super Duty "F" Series Super Duty Diesel "F" Series Super Duty Diesel

1997-03 1999-03

Excursion Diesel

2000-03

Excursion Diesel Expedition F-150 F-150 GMC Canyon Sierra 1500/1500SS Classic Sierra 1500 & 2500 Sierra 1500HD & 2500HD Sierra 1500HD/ 2500HD/3500HD Classic Sierra 2500HD & 3500HD

2003-06 1997-03 2004 2004-06

Part No.

Engines

Part No.

Ford

Cadillac Escalade Escalade ESV Escalade EXT

2002-06 2002-06 2002-06

5.3L & 6.0L 6.0L 6.0L

AEM21-8000D AEM21-8000D AEM21-8000D

Avalanche Avalanche Avalanche Silverado "SS" 1500 Silverado "SS" 1500 Classic Silverado 1500 & 2500 Silverado 1500HD & 2500HD Silverado 1500HD & 2500HD Classic Silverado 2500HD & 3500HD

2000-06 2002-05 2007-08 2002-06 2007 2000-06 2000-06

5.3L 8.1L 5.3L/6.0L 6.0L 6.0L 4.8L & 5.3L 6.0L

AEM21-8000D AEM21-8014D AEM21-8023D AEM21-8000D AEM21-8000D AEM21-8000D AEM21-8000D

2007 2001-04

6.0L 8.1L 6.6L Duramax "LB7"

AEM21-8000D AEM21-8014D

Chevy

Silverado 2500HD & 3500HD 2001-04.5 AEM21-8013D Silverado 2500/2500HD & 3500HD 2004.5-05 6.6L Duramax "LLY" AEM21-8017D Silverado 1500 2007-08 5.3L, 6.0L AEM21-8023D Silverado 2500 Classic 2007 6.0L AEM21-8000D Silverado 3500 Classic 2007 6.0L AEM21-8000D 4.8L, Suburban 2000-06 5.3L & 6.0L AEM21-8000D Suburban 2007-08 5.3L AEM21-8023D 4.8L, Tahoe 2000-06 5.3L & 6.0L AEM21-8000D Tahoe 2007-08 5.3L AEM21-8023D Dodge Magnum R/T 2005-07 5.7L Hemi AEM21-8208D Ram 2006-07 5.7L Hemi AEM21-8212D Ram 1500 1994-01 5.2L & 5.9L AEM21-8202D Ram 2500 1994-02 5.9L AEM21-8202D Ram Diesel 1994-02 5.9L Cummins AEM21-8204D Ram Diesel 2003-05 5.9L Cummins AEM21-8206D Ram Hemi (Include Power Wagon) 2003-05 5.7L Hemi AEM21-8203D Add "C" for Silver or "P" for Polished after part number to indicate desire color

1999-03 2003-06

2005-06

3.5L I5

AEM21-8018D

2007 4.8L & 5.3L, 6.0L 2000-06 4.8L & 5.3L 2000-06 6.0L

AEM21-8000D AEM21-8000D AEM21-8000D

2007 2001-04

AEM21-8000D AEM21-8014D

2004.5-05 2007-08 2007 2000-06 2007-08

6.0L 8.1L 6.6L Duramax "LB7" 6.6L Duramax "LLY" 5.3L, 6.0L 6.0L 4.8L,5.3L & 6.0L 5.3L, 6.0L, 6.2L

2006

3.5L I5

Sierra 2500HD & 3500HD 2001-04.5 Sierra 2500HD & 3500HD Sierra 1500 Sierra 2500 Classic Yukon Yukon/Yukon XL Hummer H3 Jeep Commander Grand Cherokee

4.6L & 5.4L Excluding SD & Lightning AEM21-8100D 6.8L V10 AEM21-8115D 7.3L Power Stroke AEM21-8114D 6.0L Power Stroke AEM21-8104D 7.3L Power Stroke AEM21-8114D 6.0L Power Stroke AEM21-8104D 4.6L & 5.4L AEM21-8100D 5.4L AEM21-8107D,C, P 5.4L AEM21-8117D,C, P

AEM21-8013D AEM21-8017D AEM21-8023D AEM21-8000D AEM21-8000D AEM21-8023D AEM21-8018D

2006 2005

5.7L Hemi AEM21-8306D 5.7L Hemi AEM21-8306D 4.0L Inc. Wrangler 1997-06 Rubicon AEM21-8311D Add "C" for Silver or "P" for Polished after part number to indicate desire color

DRYFLOW Performance Panel Filters Element is cleanable and is guaranteed for the life of your vehicle. DRYFLOW air filter will NOT void your vehicle’s warranty. Delivers 99.53% cumulative filtration efficiency. AEM’s unique non-woven filter media never needs oil. Filter element is virtually impossible to collapse. Part No.

Description

AEM28-20042DK............ 1991-05 Chevrolet, GMC S-10 / Sonoma / 4.3L V-6 AEM28-20129DK............ 1999-07 Chevrolet/GMC Silverado, Sierra, Sub, Tahoe / 4.3L, 4.8L, 5.3L, 6.0L, 6.2L, 8.1L / 6.6L LLY-LB7 w-Panel AEM28-20056DK............ 1994-02 Dodge Ram 2500, 3500 / 5.9L TD AEM28-20084DK............ 1994-02 Dodge Ram 1500, 2500, 3500 PU / 5.2L, 5.9L V-8 AEM28-20247DK............ 2002-07 Dodge, Ram, 3.7L, 4.7L, 5.7L, 5.9L V-8, 8.0L V-10 AEM28-20776DK............ 2003-08 Dodge Ram 2500, 3500 / 5.9L, 6.7L TD AEM28-20248DK............ 1999-03 Ford F250 SD, F350 SD, F450 SD, F550 SD, Excursion 7.3 TD AEM28-20287DK............ 2004-06 Ford F150, F250HD, F350HD, Expedition, Navigator / 5.4L AEM28-20114DK............ 1997-06 Jeep Wrangler, 2.5L/4.0L AEM28-20144DK............ 2000-06 Toyota Tundra, Sequoia 4.7L V-8 / 4 Runner, 3.4L V-6

64

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


AQP racing hose is light, flexible, and its stainless steel cover resists corrosion and abrasion. Hose can operate at higher temperatures for longer periods of time and is compatible with petroleum or synthetic lubricants, hydrocarbon fuels and engine coolants. Sold in 3, 6, 10, 15 and 20 foot lengths. Aeroquip is the only performance plumbing supplier to manufacture their own hose and fittings. Hose Size

I.D.

O.D.

3 Feet

-04 -06 -08 -10 -12 -16 -20

.22" .34" .44" .56" .69" .88" 1.13"

.44" .55" .65" .80" .94" 1.15" 1.41"

AERFCA0403 AERFCA0603 AERFCA0803 AERFCA1003 AERFCA1203 AERFCA1603 AERFCA2003

AQP Racing Hose 6 Feet Part No.

AERFCA0406 AERFCA0606 AERFCA0806 AERFCA1006 AERFCA1206 AERFCA1606 AERFCA2006

Bulk Firesleeve and Support Clamps Listed in the right columns of the chart are the part numbers for Firesleeve and Support Clamps for each size hose. Firesleeve protects hose from fire damage and can be used as an insulator to keep fuel lines cool. Support clamps are the professional method to secure Aeroquip hose to chassis, frame rails, etc.

10 Feet Part No.

15 Feet Part No.

20 Feet Part No.

Firesleeve Part No.

Support Clamp Part No.

AERFCA0410 AERFCA0610 AERFCA0810 AERFCA1010 AERFCA1210 AERFCA1610 AERFCA2010

AERFCA0415 AERFCA0615 AERFCA0815 AERFCA1015 AERFCA1215 AERFCA1615 AERFCA2015

AERFCA0420 AERFCA0620 AERFCA0820 AERFCA1020 AERFCA1220 AERFCA1620 AERFCA2020

AERFCS09XX AERFCS11XX AERFCS12XX AERFCS14XX AERFCS18XX AERFCS20XX AERFCS24XX

AERFCM3482 AERFCM3484 AERFCM3485 AERFCM3487 AERFCM3488 AERFCM3536 AERFCM3538

Reusable Fittings For AQP Racing Hose Aeroquip steel or anodized aluminum reusable fittings are engineered to match Aeroquip hose tolerances to provide excellent performance and service. High quality one-piece fitting has no braze joints to break or leak. When methanol and nitromethane fuel mixtures are used, corrosion can occur. Check the fittings regularly for signs of corrosion and flush system after use. Size

Straight -4 Steel -6 -6 Steel -8 -8 Steel -10 -12 -16 -20 30° Elbow -6 -8 -10 -12 -16 45° Elbow -4 Steel -6 -8 -10 -12 -16 -20

Swivel

Non-Swivel

AERFCM1011 AERFCM1012 AERFCM1075 AERFCM1013 AERFCM1076 AERFCM1014 AERFCM1015 AERFCM1016 AERFCM1017

– – – – – – – – –

AERFCM4072 AERFCM4073 AERFCM4074 AERFCM4075 AERFCM4076

– – – – –

– AERFCM4022 AERFCM4023 AERFCM4024 AERFCM4025 AERFCM4026 –

AERFCM1021 AERFCM1022 AERFCM1023 AERFCM1024 AERFCM1025 AERFCM1026 AERFCM1027

Size

Swivel

60° Elbow -6 AERFCM4082 -8 AERFCM4083 -10 AERFCM4084 -12 AERFCM4085 -16 AERFCM4086 90° Elbow -4 Steel – -6 AERFCM4032 -8 AERFCM4033 -10 AERFCM4034 -12 AERFCM4035 -16 AERFCM4036 -20 – 120° Elbow -6 AERFCM4042 -8 AERFCM4043 -10 AERFCM4044 -12 AERFCM4045 150° Elbow -6 AERFCM4052 -8 AERFCM4053 -10 AERFCM4054 -12 AERFCM4055 180° Elbow -6 AERFCM4062 -8 AERFCM4063 -10 AERFCM4064 -12 AERFCM4065

Non-Swivel

– – – – – AERFCM1031 AERFCM1032 AERFCM1033 AERFCM1034 AERFCM1035 AERFCM1036 AERFCM1037 AERFCM1042 AERFCM1043 AERFCM1044 AERFCM1045 AERFCM1052 AERFCM1053 AERFCM1054 AERFCM1055 AERFCM1062 AERFCM1063 AERFCM1064 AERFCM1065

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

65

performance

AQP Racing Hose


performance

StartLite Hose and Fittings StartLite hose, with patented AQP elastomer inner tube and Nomex outer cover is 45% lighter than conventional high performance assemblies and when combined with aluminum, crimp-style fittings, can represent substantial weight savings. Use for fuel, lube, coolant and air systems. Sizes -04 through -20. Crimp with Aeroquip Pro Crimp FT1380-115 Assembly Machine. May also be used with reusable fittings.

Package Length and Part Number Hose Dash Size

I.D.

Max. Oper. Pressure (P.S.I.)

O.D.

Minimum Bend Radius

-04 .22" .43" 200 2.00" -06 .34" .55" 200 2.50" -08 .44" .64" 200 3.50" -10 .56" .80" 200 4.00" -12 .69" .93" 200*/100** 4.50" 200*/100** 5.50" -16 .88" 1.15" *Lightweight crimp fittings. **Reusable fittings.

Weight Per Ft.

Vacuum Service

6 Ft. Length

10 Ft. Length

15 Ft. Length

20 Ft. Length

.05 lbs. .08 lbs. .11 lbs. .14 lbs. .16 lbs. .20 lbs.

20" 20" 20" 20" 20" 20"

AERFCU0406 AERFCU0606 AERFCU0806 AERFCU1006 AERFCU1206 AERFCU1606

AERFCU0410 AERFCU0610 AERFCU0810 AERFCU1010 AERFCU1210 AERFCU1610

AERFCU0415 AERFCU0615 AERFCU0815 AERFCU1015 AERFCU1215 AERFCU1615

AERFCU0420 AERFCU0620 AERFCU0820 AERFCU1020 AERFCU1220 AERFCU1620

Lightweight Crimp Aluminum Fittings For AQP Racing or StartLite Hose

Straight Dash Size

45° Elbow Crimp Swivel

90° Elbow

Dash Size

-4 ........................AERFBM4211 -6 ........................AERFBM4212 -8 ........................AERFBM4213 -10 ......................AERFBM4214 -12 ......................AERFBM4215 -16 ......................AERFBM4216

Crimp Swivel

Dash Size

120° Elbow Crimp Swivel

Dash Size

Crimp Swivel

-6........................AERFBM4222 -6 .........................AERFBM4232 -6 .....................AERFBM4242 -8........................AERFBM4223 -8 .........................AERFBM4233 -8 .....................AERFBM4243 -10 .....................AERFBM4224 -10.......................AERFBM4234 -10 ...................AERFBM4244 -12 .....................AERFBM4225 -12.......................AERFBM4235 -12 ...................AERFBM4245 -16 .....................AERFBM4226 -16.......................AERFBM4236 -16 ...................AERFBM4246 Note: Lightweight crimp fittings must be assembled with ProCrimp crimp machines. Select AQP lightweight crimp fittings for ultimate weight savings. Select AQP reusable fittings for field serviceability.

Socketless Hose and Fittings AQP Socketless hose and fittings are easily assembled without tools, saving time and effort. Socketless hose is offered in blue or black and may be used for gasoline, alcohol, oils, air and water. Hose Dash Size

I.D.

Blue Socketless Hose -04 .25" -06 .38" -08 .50" -10 .63" -12 .75" Black Socketless Hose -06 .38" -08 .50" -10 .63"

O.D.

Max. Oper. Pressure (P.S.I.)

Min. Bend Radius

Vacuum Service

3 Ft. Length

6 Ft. Length

10 Ft. Length

15 Ft. Length

20 Ft. Length

.49" .62" .75" .91" 1.03"

250 250 250 250 250

3.00" 3.00" 5.00" 6.00" 7.00"

28" 28" 28" 18" 18"

AERFCV0403 AERFCV0603 AERFCV0803 AERFCV1003 AERFCV1210

AERFCV0406 AERFCV0606 AERFCV0806 AERFCV1006 AERFCV1210

AERFCV0410 AERFCV0610 AERFCV0810 AERFCV1010 AERFCV1210

AERFCV0415 AERFCV0615 AERFCV0815 AERFCV1015 AERFCV1215

AERFCV0420 AERFCV0620 AERFCV0820 AERFCV1020 AERFCV1220

.62" .75" .91"

250 250 250

3.00" 5.00" 6.00"

28" 28" 18"

– – –

– – –

– – –

AERFCN0615 AERFCN0815 AERFCN1015

AERFCN0620 AERFCN0820 AERFCN1020

Socketless Straight Fittings Hose Size

Aluminum

Nickel Plated Aluminum

Bulk

Brass Male Pipe Pipe Thread Size

AERFBM1200 -4 – – AERFBM1201 AERFBM1207 -6 AERFCM1512 AERFCE1512 AERFBM1202 AERFBM1206 AERFCM1513 AERFCE1513 -8 AERFBM1203 -10 AERFCM1514 AERFCE1514 AERFBM1204 -12 AERFCM1515 AERFCE1515 AERFBM1205 † Fittings mate with both 37° and 45° male flares.

66

1/8" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4"

Brass Male Flare

AERFCM1512

Brass Swivel

AERFCE1512

AERFBM1444 AERFBM1231

AERFBM1445 AERFBM1222 AERFBM1206

AERFBM1233†

– –

AERFBM1234† AERFBM1225

AERFBM1444

AERFBM1231

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Carburetor and Banjo Fittings AERFCM1066

AERFCM1522

AERFCE1524

AERFBM1439

Banjo fitting for Holley Single Feed 600-660 Series and all 2 barrel series with 9/16"-24 thread. Hose fitting size is -06. Replacement Crushwasher AERFCM3627.

AERFCM2110 Holley Dual Feed 750 thru Dominator 1350 Series and Quadrajet up to 1974 with 7/8"-20 thread. Hose fitting size is -08. Replacement Crushwasher AERFCM3516. AERFCM1532

AERFCE1532

AERFBM1441

AERFCM2113 Holley Single Feed 600-660 Series, 4010/4011 Series and all 2 barrel series with 9/16"-24 thread. Hose fitting size is -06. Replacement Crushwasher AERFCM3514. AERFCM1542 Hose Size

AERFCM1552

AERFCM1562

Aluminum

Nickel Plated Aluminum

Steel Swivel

AERFCM1522 AERFCM1523 AERFCM1524 AERFCM1525

AERFCE1522 AERFCE1523 AERFCE1524 –

AERFBM1439 AERFBM1440 – –

– AERFCM1532 AERFCM1533 AERFCM1534 AERFCM1535

– AERFCE1532 AERFCE1533 AERFCE1534 AERFCE1535

AERFBM1441 AERFBM1442 AERFBM1443 – –

45° -6 -8 -10 -12 90° -4 -6 -8 -10 -12

120°

150°

180°

Hose Size

Aluminum

Aluminum

Aluminum

-6 -8 -10 -12

AERFCM1542 AERFCM1543 AERFCM1544 AERFCM1545

AERFCM1552 AERFCM1553 AERFCM1554 AERFCM1555

AERFCM1562 AERFCM1563 AERFCM1564 AERFCM1565

AERFCM2114 Holley Dual Feed 750 thru Dominator 1350 Series and Quadrajet up to 1974 with 7/8"-20 thread. Hose fitting size is -06. Replacement crushwasher is AERFCM3516.

AERFCM2192 Holley Dual Feed 750 thru Dominator 1350 Series and Quadrajet up to 1974 with 7/8"-20 thread. Hose fitting size is -08. Replacement Crushwasher AERFCM3516.

AERFCM2193 Holley Dual Feed 750 thru Dominator 1350 Series and Quadrajet up to 1974 with 7/8"-20 thread. Hose fitting size is -06. Replacement Crushwasher AERFCM3516.

AERFCM2247 Socketless Fitting Assembly Tool AERFBM3632

Barry Grant Demon carburetor with 9/16"-24 threads. Long stem with -6AN female swivel.

Hand-held tool makes quick and easy work of installing fittings into FBV socketless hose. Works on hose sizes -04, -06 and -08.

AERFCM2248 Barry Grant Demon carburetor with 9/16"-24 threads. Long stem with -8AN female swivel.

AERFCM2249 Barry Grant Demon carburetor with 9/16"-24 threads. Short stem with -8AN male end.

AERFCM2961 Holley Dual Feed 750 thru Dominator 1350 Series and Quadrajet up to 1974 with 7/8"-20 thread. Hose fitting size is -08. Steel only. Replacement Crushwasher AERFCM3516.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

67

performance

Socketless Elbow Fittings


performance

Direct to Pipe/Port Fittings Bulk Part No.

Hose Size

AN Flare Adapters (continued)

Thread Size

Reusable Aluminum Swivel Male Pipe 90° ORB Fitting AERFCM1343 -6 3/8" NPTF AERFCM1344 -8 1/2" NPTF AERFCM1345 -12 3/4" NPTF Reusable Aluminum Swivel S.A.E. 37° (JIC/AN) 45° ORB Fitting AERFCM1353 -12 1-1/16"-12 90° ORB Fitting AERFCM1359 -12 7/8"-14 AERFCM1360 -12 1-1/16"-12

AN Flare Adapters Aluminum Part No.

Steel Part No.

B “A” Dash Size

“B” Dash Size

Aluminum or Steel Flare Union AERFCM2050 AERFCM2750 -3 AERFCM2051 AERFCM2751 -4 AERFCM2052 AERFCM2756 -6 AERFCM2053 AERFCM2759 -8 AERFCM2054 AERFCM2761 -10 AERFCM2055 AERFCM2763 -12 AERFCM2056 AERFCM2765 -16 Aluminum or Steel Union Reducer AERFCM2048 AERFCM2749 -4 AERFCM2156 – -6 AERFCM2049 AERFCM2757 -8 AERFCM2160 AERFCM2758 -8 AERFCM2188 – -10 AERFCM2162 – -10 AERFCM2163 AERFCM2760 -10 AERFCM2189 – -12 AERFCM2165 – -12 AERFCM2166 – -12 AERFCM2167 AERFCM2762 -12 AERFCM2169 – -16 AERFCM2170 AERFCM2764 -16 Aluminum Female Flare Swivel AERFCM2914 – -4 AERFCM2915 – -6 AERFCM2916 – -8 AERFCM2917 – -10 AERFCM2918 – -12 Aluminum or Steel O-Ring Boss to Male 37° AERFCM2953 AERFCM2957 -10 AERFCM2954 AERFCM2958 -10 AERFCM2955 AERFCM2959 -12 AERFCM2956 AERFCM2960 -12

-3 -4 -6 -8 -10 -12 -16 -3 -4 -4 -6 -4 -6 -8 -4 -6 -8 -10 -10 -12 -4 -6 -8 -10 -12 -10 -12 -12 -16

“A” Dash Size

Part No.

A

B

A

B

Aluminum 90° Elbow Union AERFCM2186 -3 AERFCM2119 -4 AERFCM2120 -6 AERFCM2190 -8 AERFCM2191 -12 Aluminum Union Tee AERFCM2060 -3 AERFCM2061 -4 AERFCM2062 -6 AERFCM2063 -8 AERFCM2064 -10 AERFCM2065 -12 Aluminum Female Flare Tee AERFCM2173 -4 AERFCM2174 -6 AERFCM2175 -8 AERFCM2176 -10 AERFCM2177 -12

“B” Dash Size

“C” Dash Size

-3 -4 -6 -8 -12

– – – – –

-3 -4 -6 -8 -10 -12

-3 -4 -6 -8 -10 -12

-4 -6 -8 -10 -12

-4 -6 -8 -10 -12

A

B

B

A

C B

C

A

AN Plugs Aluminum Part No.

Steel Part No.

“A” Dash Size

Aluminum or Steel Flare Plugs AERFCM3712 AERFCM3701 AERFCM3713 AERFCM3702 AERFCM3714 AERFCM3703 AERFCM3715 AERFCM3704 AERFCM3716 AERFCM3705 AERFCM3717 AERFCM3706 AERFCM3718 AERFCM3707 Aluminum O-Ring Boss Plug AERFCM3722 – AERFCM3723 – AERFCM3724 – AERFCM3725 – AERFCM3726 – AERFCM3727 –

-3 -4 -6 -8 -10 -12 -16 -3 -4 -6 -8 -10 -12

A

A

A B

A

Vise Jaw Inserts AERFCM3661 Keep Aeroquip fittings looking good even after assembly. Magnetic backed, aluminum inserts may be quickly set up and will firmly hold the hex of the fitting during assembly, without marring the finish. A horizontal pocket the entire length of the inserts holds braided hose in place, making straight cuts fast and simple.

Aluminum Dust Plugs and Caps Keeps dirt and contamination out of oil, fuel and cooling systems when not in use.

68

Dash Size

NPT

Plug Part No.

Cap Part No.

No. Per Pkg.

-04 -06 -08 -10 -12 -16

7/16"-20 9/16"-18 3/4"-16 7/8"-14 1-1/16"-12 1-5/16"-12

AERFBM3655 AERFBM3656 AERFBM3657 AERFBM3658 AERFBM3659 AERFBM3660

AERFBM3648 AERFBM3649 AERFBM3650 AERFBM3651 AERFBM3652 AERFBM3653

20 20 20 12 10 10

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Aluminum Part No.

Steel Part No.

“A” Dash Size

Aluminum or Steel Male Connector AERFCM2000 AERFCM2511 -3 AERFCM2001 AERFCM2512 -4 AERFCM2002 AERFCM2515 -4 – AERFCM2519 -4 – AERFCM2524 -4 AERFCM2003 AERFCM2514 -6 AERFCM2004 AERFCM2517 -6 AERFCM2005 AERFCM2521 -6 AERFCM2013 AERFCM2525 -6 – AERFCM2529 -6 AERFCM2006 AERFCM2518 -8 AERFCM2007 AERFCM2522 -8 AERFCM2008 AERFCM2526 -8 – AERFCM2530 -8 AERFCM2185 AERFCM2523 -10 AERFCM2009 AERFCM2527 -10 – AERFCM2531 -10 AERFCM2010 AERFCM2528 -12 AERFCM2011 AERFCM2532 -12 AERFCM2014 AERFCM2534 -12 AERFCM2015 AERFCM2533 -16 AERFCM2012 AERFCM2535 -16 – AERFCM2540 -16 – AERFCM2541 -20 Aluminum or Steel 45˚ Male Elbow AERFCM2020 AERFCM2581 -3 AERFCM2021 AERFCM2582 -4 – AERFCM2584 -4 AERFCM2022 AERFCM2586 -6 – AERFCM2589 -6 – AERFCM2592 -6 – AERFCM2587 -8 AERFCM2023 AERFCM2590 -8 – AERFCM2593 -8 – AERFCM2591 -10 AERFCM2024 AERFCM2594 -10 – AERFCM2597 -10 – AERFCM2595 -12 AERFCM2025 AERFCM2598 -12 – AERFCM2599 -16 AERFCM2026 – -16 Aluminum or Steel 90˚ Male Elbow AERFCM2030 AERFCM2610 -3 AERFCM2031 AERFCM2611 -4 AERFCM2032 AERFCM2614 -4 – AERFCM2618 -4 – AERFCM2624 -4 AERFCM2033 AERFCM2613 -6 AERFCM2034 AERFCM2616 -6 AERFCM2035 AERFCM2620 -6 – AERFCM2625 -6 AERFCM2036 AERFCM2617 -8 AERFCM2037 AERFCM2621 -8 AERFCM2038 AERFCM2626 -8 – AERFCM2629 -8 AERFCM2016 AERFCM2622 -10 AERFCM2039 AERFCM2627 -10 – AERFCM2630 -10 – AERFCM2623 -12 AERFCM2017 AERFCM2628 -12 AERFCM2040 AERFCM2631 -12 AERFCM2018 – -16 AERFCM2041 AERFCM2634 -16

B

“B” Pipe Size

1/8" 1/8" 1/4" 3/8" 1/2" 1/8" 1/4" 3/8" 1/2" 3/4" 1/4" 3/8" 1/2" 3/4" 3/8" 1/2" 3/4" 1/2" 3/4" 1" 3/4" 1" 1-1/4" 1-1/4" 1/8" 1/8" 1/4" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 3/8" 1/2" 3/4" 1/2" 3/4" 3/4" 1" 1/8" 1/8" 1/4" 3/8" 1/2" 1/8" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 3/4" 3/8" 1/2" 3/4" 3/8" 1/2" 3/4" 3/4" 1"

A

Aluminum or Steel Male Run Tee Aluminum Part No.

Steel Part No.

AERFCM2714 AERFCM2124 – AERFCM2125 – AERFCM2126 – – –

AERFCM2700 AERFCM2701 AERFCM2703 AERFCM2704 AERFCM2705 – AERFCM2707 AERFCM2708 AERFCM2710

C

A

“A” “B” “C” Dash Size Pipe Size Dash Size

-3 -4 -4 -6 -6 -8 -8 -10 -12

1/8" 1/8" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4"

-3 -4 -4 -6 -6 -8 -8 -10 -12

B

B

Aluminum Male Branch Tee Aluminum Part No.

“A” Dash Size

“B” Dash Size

“C” Pipe Size

AERFCM2187 AERFCM2121 AERFCM2122 AERFCM2123

-3 -4 -6 -8

-3 -4 -6 -8

1/8" 1/8" 1/4" 3/8"

C

A

Steel Female Pipe to Male AN

A

Steel Part No.

“A” Dash Size

“B” Pipe Size

AERFCM2719 AERFCM2720 AERFCM2721 AERFCM2723 AERFCM2725 AERFCM2726 AERFCM2727 AERFCM2728 AERFCM2730 AERFCM2731 AERFCM2732

-3 -3 -4 -4 -6 -8 -6 -8 -8 -10 -12

1/8" 1/4" 1/8" 1/4" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 1/2"

B

A

B

B

Steel Female Pipe Flare Tee

A

Aluminum Part No.

“A” Dash Size

“B” Dash Size

“C” Pipe Size

AERFCM2881 AERFCM2882 AERFCM2883 AERFCM2884 AERFCM2885

-3 -4 -4 -6 -8

-3 -4 -4 -6 -8

1/8" 1/8" 1/4" 1/4" 3/8"

C

A

B

Steel Flare to Braze

B

Part No.

“A” Dash Size

“B” Tube Size

“C” Counterbore Size

AERFCM2871 AERFCM2872 AERFCM2873 AERFCM2874 AERFCM2875 AERFCM2876 AERFCM2877 AERFCM2878 AERFCM2879

-4 -6 -6 -8 -10 -10 -12 -12 -16

1/4" 3/8" 1/2" 1/2" 5/8" 3/4" 3/4" 1" 1"

.16 .16 .16 .16 .16 .25 .25 .25 .25

C A B

AERFCM2831 (Male)

Steel Bulkhead Connectors Steel Part No.

“A” Dash Size

“B” Pipe Size

AERFCM2831 (Male) AERFCM2821 (Female)

-4 -4

1/4" 1/8"

A

B

AERFCM2821 (Female) A

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

69

performance

AN Flare to Pipe Adapters


performance

B

Pipe Adapters “A” Pipe Size

Part No.

AN Flare Bulkhead Adapters

“B” Pipe Size

Aluminum Pipe Coupling AERFCM2129 1/8" AERFCM2130 1/4" AERFCM2131 3/8" Aluminum Female to Male Pipe 90˚ Elbow AERFCM2147 1/8" AERFCM2148 1/4" AERFCM2149 3/8" Aluminum Pipe Bushing AERFCM2136 1/4" AERFCM2137 3/8" AERFCM2138 3/8" AERFCM2139 1/2" AERFCM2140 1/2" AERFCM2141 1/2" AERFCM2142 3/4" AERFCM2143 3/4" AERFCM2144 3/4" AERFCM2145 1" AERFCM2146 1"

Aluminum Part No.

1/8" 1/4" 3/8" 1/8" 1/4" 3/8" 1/8" 1/4" 1/8" 3/8" 1/4" 1/8" 1/2" 3/8" 1/4" 3/4" 1/2"

A

A

B

B

A

B

Aluminum Female Pipe Tee Part No.

“A” Pipe Size

“B” Pipe Size

“C” Pipe Size

AERFCM2150 AERFCM2151 AERFCM2152

1/8" 1/4" 3/8"

1/8" 1/4" 3/8"

1/8" 1/4" 3/8"

“B” Pipe Size

AERFCM2132 AERFCM2133 AERFCM2134 AERFCM2135

1/8" 1/4" 3/8" 1/2"

1/8" 1/4" 3/8" 1/2"

“B” Dash Size

Aluminum or Steel Bulkhead Union AERFCM2769 AERFCM2770 -3 AERFCM2071 AERFCM2771 -4 AERFCM2072 AERFCM2774 -6 AERFCM2073 AERFCM2775 -8 AERFCM2074 AERFCM2776 -10 AERFCM2075 AERFCM2777 -12 AERFCM2076 – -16 Aluminum or Steel 45˚ Elbow Bulkhead Union AERFCM2893 – -3 AERFCM2127 – -4 AERFCM2128 AERFCM2783 -6 – AERFCM2784 -8 – AERFCM2785 -10 Aluminum or Steel 90˚ Elbow Bulkhead Union AERFCM2799 AERFCM2790 -3 AERFCM2081 AERFCM2791 -4 AERFCM2082 AERFCM2793 -6 AERFCM2083 AERFCM2794 -8 AERFCM2084 AERFCM2795 -10 AERFCM2085 – -12 AERFCM2086 – -16

Aluminum Part No. A

Aluminum Male Pipe Nipple “A” Pipe Size

“A” Dash Size

-3 -4 -6 -8 -10 -12 -16 -3 -4 -6 -8 -10 -3 -4 -6 -8 -10 -12 -16

A

B

A

B A

C

C B

Part No.

Steel Part No.

B

Steel Part No.

“A” Dash Size

“B” Dash Size

“C” Dash Size

Aluminum or Steel Bulkhead Run Tee AERFCM2815 AERFCM2809 -3 -3 AERFCM2117 – -4 -4 AERFCM2118 – -6 -6 Aluminum or Steel Bulkhead Tee AERFCM2808 AERFCM2800 - 3 -3 AERFCM2091 AERFCM2801 - 4 -4 AERFCM2092 – -6 -6 AERFCM2093 – -8 -8

-3 -4 -6

A

B C

-3 -4 -6 -8

A

A

Aluminum or Steel Locknut Aluminum Allen Head Pipe Plug Part No.

“A” Pipe Size

No. Per Pkg.

AERFCM3684 AERFCM3685 AERFCM3686 AERFCM3687 AERFCM3749 AERFCM3750

1/16" 1/8" 1/4" 3/8" 1/2" 3/4"

2 2 2 2 1 1

A

Aluminum Part No.

Steel Part No.

“A” Dash Size

No. Per Pack

AERFCM3556 AERFCM2099 AERFCM2100 AERFCM2103 AERFCM2104 AERFCM2105 AERFCM2106

AERFCM2095 AERFCM2096 AERFCM2098 AERFCM3584 AERFCM3585 AERFCM3586 –

-3 -4 -6 -8 -10 -12 -16

2 2 2 1 1 1 1

B

A

Steel Reducer 37˚ Flare Swivel/37˚ Flare Steel Part No.

Hose Assembly Lube AERFBM3553 A specially compounded lubricant for use in hose assembly work. Suitable for hand or machine assembly. One pint container.

“A” Dash Size

AERFCM2408 -6 AERFCM2409 -8 AERFCM2410 -8 AERFCM2411 -10 AERFCM2413 -12 AERFCM2414 -12 Steel Reducer 37˚ Flare/37˚ Flare AERFCM2421 -10 AERFCM2422 -12

-4 -4 -6 -6 -6 -8

A B

-8 -10

A

70

B

“B” Dash Size

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Aluminum Part No.

Steel Part No.

Brake Fittings “A” Dash Size

Alum. No. Per Pkg.

Steel No. Per Pkg.

AN Tube Cap* AERFCM3751 AERFCM3479 -3 2 AERFCM3752 AERFCM3480 -4 2 AERFCM3740 AERFCM3602 -6 1 AERFCM3741 AERFCM3603 -8 1 AERFCM3742 AERFCM3604 -10 1 AERFCM3743 AERFCM3605 -12 1 AERFCM3744 AERFCM3566 -16 1 AN Tube Nut** AERFCM3554 AERFCM3591 -3 6 AERFCM3555 AERFCM3570 -4 6 – AERFCM3571 -5 – AERFCM3675 AERFCM3572 -6 2 AERFCM3676 AERFCM3573 -8 2 AERFCM3677 AERFCM3574 -10 2 AERFCM3678 – -12 2 AN Tube Sleeve** AERFCM3669 AERFCM3667 -3 6 AERFCM3670 AERFCM3668 -4 6 – AERFCM3679 -5 2 AERFCM3671 AERFCM3680 -6 2 AERFCM3672 AERFCM3681 -8 2 AERFCM3673 – -10 2 AERFCM3674 – -12 2 *Aluminum tube caps are two-piece. AN numbers for configuration reference. **For use with aluminum tubing. Tube nut and sleeve are to be used together.

Part No.

6 6 2 2 2 2 –

A

1 1 1 1 1 1 1

A

6 6 2 2 2 2 2 A

TFE Racing Hose Brake Lines

I.D.

-3 -4

.13" .25" .19" .30"

O.D.

Size

I.D.

-3 -4

.13" .25" .19" .30"

Hose and Fitting Dash Size

Straight Steel SAE 37˚ (JIC/AN) Swivel AERFCM1100.......................................... -3 AERFCM1101.......................................... -4 Steel 45˚ Tube Elbow 37˚ (JIC/AN) AERFCM1110.......................................... -3 AERFCM1111.......................................... -4 Steel 90˚ Tube Elbow 37˚ (JIC/AN) AERFCM1120.......................................... -3 AERFCM1121.......................................... -4 Straight Steel Crimp 37˚ (JIC/AN) AERFCM1130.......................................... -3 AERFCM1102.......................................... -4 45˚ Stainless Steel Forged Elbow SAE 37˚ (JIC/AN) Swivel AERFCM1140.......................................... -3 AERFCM1146.......................................... -4 90˚ Stainless Steel Forged Elbow SAE 37˚ (JIC/AN) Swivel AERFCM1150.......................................... -3 AERFCM1151.......................................... -4

Steel Male Pipe w/Brass Nipple

Aeroquip TFE Racing Hose for hydraulic brake applications has a bright stainless steel wire braid cover that resists abrasion and corrosion and an extruded Teflon inner liner that’s compatible with all brake fluids. Teflon hose is recommended for use only on off-highway brake systems. Temperature range of -100°F to +450°F. Size

performance

AN Tube Fittings

3'

6'

10'

AERFCC0303 AERFCC0403

AERFCC0306 AERFCC0406

AERFCC0310 AERFCC0410

O.D.

15'

20'

AERFCC0315 AERFCC0415

AERFCC0320 AERFCC0420

Part No.

Hose and Fitting Dash Size

Pipe Thread Size

AERFCM3088 AERFCM3089

-4 -4

1/8" 1/4"

Replacement Sleeve for TFE Fittings Brass Part No.

Stainless Part No.

Hose and Fitting Dash Size

AERFCM3720 AERFCM3721 AERFCM3823

AERFCM3821 AERFCM3822 –

-3 -4 -6

A

Replacement Aluminum Crushwashers

O-Rings Nitrile* Part No.

For use with banjo fittings and carburetor adapters. Five per package. Part No.

Dash Size

AERFCM3642....................-3 AERFCM3513....................-4 AERFCM3514....................-6

Part No.

Dash Size

AERFCM3515................. -8 AERFCM3516................-10 AERFCM3517................-12

B EPR** Part No.

Dash Size

“A”

“B”

AERFCM3472 – -3 .301" .064" AERFCM3473 AERFCM3463 -4 .351" .072" AERFCM3474 AERFCM3464 -6 .468" .078" AERFCM3475 AERFCM3465 -8 .644" .087" AERFCM3476 AERFCM3466 -10 .755" .097" AERFCM3477 AERFCM3467 -12 .924" .116" AERFCM3497 AERFCM3468 -16 1.171" .116" – AERFCM3469 -20 1.475" .118" *Nitrile O-rings are for use with gasoline (ten per package) **EPR O-rings are for use w/nitromethane and alcohol (five per package)

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

71


performance

Steel Inverted Flare Brake Adapters Part No.

“A” Hose Fitting Dash Sizes

“B” Brake Thread Size

SAE 37˚ Male Flare to 30˚ Inverted Flare (two per package) AERFCM2925 -4 7/16"-20 SAE 37˚ Male Flare to Female Inverted Flare (two per package) AERFCM2936 -3 3/8"-24 AERFCM2937 -4 3/8"-24 SAE 37˚ Male Flare to 42˚ Inverted Flare (short hex, two per package) AERFCM2926 -3 3/8"-24 AERFCM2927 -4 3/8"-24 AERFCM2928* -3 3/8"-24 AERFCM2929 -3 7/16"-24 AERFCM2930 -4 7/16"-24 AERFCM2931 -4 1/2"-20 SAE 37˚ Male Flare to Female Inverted Flare Tee (one per package) AERFCM2909 -3 3/8"-24 AERFCM2910 -4 3/8"-24 *Fitting has small hex.

Hydraulic Brake Coupling

A

B

A

B

“A” Hose Fitting Dash Sizes

A

B

B

A

A

“B” Brake Thread Size

SAE 37˚ Male Flare to Metric Flare (two per package) AERFCM2941 -3 10mm X 1" AERFCM2942 -3 10mm X 1.25" AERFCM2943 -4 10mm X 1" AERFCM2944 -4 10mm X 1.25" SAE 37˚ Male Flare to Female Metric Flare (two per package) AERFCM2945 -3 10mm x 1" AERFCM2946 -4 10mm x 1"

“A” Hose Fitting Dash Sizes

Part No.

“A” Thread Size

3000

Fluid Loss C.C. Max

Length (In.) Connected

.10

.05

3.52"

Hose Fitting Max. Oper. Dash Size Pressure (PSI)

-3 -4

3000 3000

Air Incl. C.C. Max

Fluid Loss C.C. Max

Length (In.) Connected

.02 .02

.10 .10

4.10" 4.25"

B

Aluminum Tank Welding Bungs Part No. A

B

“B” Brake Thread Size

SAE 37˚ Flare to Banjo (two per package) AERFCM2949 -3 3/8" AERFCM2938 -4 3/8" AERFCM2939 -3 7/16" AERFCM2940 -4 7/16"

-4

Air Incl. C.C. Max

Allows rapid connection/ disconnection of brake and clutch lines without fluid loss, air inclusion or the need to bleed the line. Coupling also includes a safety clip on lanyard to prevent accidental disconnection. Available with -3 or -4AN, S.A.E. 37° (JIC/AN) threads. Male half includes jam nut for bulkhead mounting. Temperature range -40°F to +250°F. For use with non-petroleum brake fluids. AERFBM1073 AERFBM1074

A

Hose Fitting Max. Oper. Dash Size Pressure (PSI)

Quick Disconnect Brake and Clutch Coupling

Steel Part No.

SAE Banjo Brake Adapters Part No.

Steel Part No.

AERFBM3079

Metric Brake Adapters Part No.

Hydraulic brake couplings seal themselves, allowing removal and reinstallation of brake lines without bleeding the lines. Both ends have -4AN, S.A.E. 37° (JIC/AN) threads.

“A” Dash Size

“B” Dim.

“C” Dim.

AERFCM2403 -06 1.56" .59" C AERFCM2404 -08 1.75" .68" A B AERFCM2405 -10 1.87" .75" AERFCM2406 -12 2.00" .90" AERFCM2407 -16 2.25" .93" Note: Use O-ring for sealing. Accepts male AN flare with hex or boss O-ring plug.

B

A

Crushwasher Part No.

SAE 37˚ Banjo Bolt (one per package) AERFCM2921 3/8"-24 AERFCM3642 AERFCM2922 7/16"-20 AERFCM3513

A

Rim Wrench Metric Banjo Brake Adapters Part No.

“A” Hose Fitting Dash Sizes

ARW54-500005 Engineered specifically for straightening the outer edges of a damaged wheel without cracking or creasing it.

“B” Brake Thread Size

SAE 37˚ Male Flare to Metric Banjo (two per package) AERFCM2947 -3 10mm AERFCM2948 -4 10mm Part No.

“A” Thread Size

Valve Core Wrench ARW54-500008

Crushwasher Part No.

Metric Banjo Bolt (one per package) AERFCM2923 10mm x 1.25" AERFCM3642

72

B

A A

Extended length, stainless steel tool removes cores from valve stems located behind the window of a wheel.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Related Components

AQP Power Steering Hose is for high pressure power steering, hydraulic, air, fuel and oil applications. Offered in blue or black, abrasion-resistant fabric cover surrounds a patented AQP synthetic rubber tube. -06AN AQP Hose has .31" I.D., .67" O.D., a maximum operating pressure of 2,250 psi, minimum bend radius of 4", vacuum service of 28 In/Hg and uses standard, reusable fittings. Sold in pre-cut lengths of 3, 6, 10, 15 and 20 feet. 3'

6'

10'

performance

AQP® Power Steering Hose

15'

20'

Blue Hose – AERFCG0606 AERFCG0610 AERFCG0615 AERFCG0620 Black Hose AER1503-6-3 AER1503-6-6 AER1503-6-10 AER1503-6-15 AER1503-6-20

Fittings For Power Steering Hose

Dual Feed Assemblies for Holley Carbs Dual Feed Assemblies are completely assembled and ready to install. Part No.

Application

AERFCP0101 Double Pumper Carbs AERFCP0102 Dual Feed Single Pump Carbs AERFCP0134 Double Pumper Carbs

Dist. Between Bowl Fittings

Hose and Fitting Dash

9-1/4" 8-5/8" 9-1/4"

-6 -6 -8

Aluminum Fuel Pump Adapters Part No.

Hose Fitting Dash Size

Application

AERFCM2108 AERFCM2111 AERFCM2185

-6 -6 -10

Inv. Flare 5/8"-18 Thread Inv. Flare 1/2"-20 Thread 3/8" Male Pipe To -10 Flare

Straight SAE 37° (JIC/AN) Swivel Part No.

Hose and Fitting Dash Size

AERFBM1302 .........................................-06 AERFBM1305 .........................................-08 45° SAE 37° (JIC/AN) Swivel Part No.

Hose and Fitting Dash Size

AERFBM1386 .........................................-06 AERFBM1384 .........................................-08 90° SAE 37° (JIC/AN) Swivel Part No.

Hose and Fitting Dash Size

Aluminum Fuel Block

A

Part No.

“A” Pipe Size

“B” Pipe Size

“C” Pipe Size

“D” Pipe Size

AERFCM2178 AERFCM2179

1/4" 3/8"

1/4" 3/8"

1/8" 1/8"

3/8" 1/2"

B

C D

Aluminum In-Line Fuel Pressure Adapters Part No.

“A” Dash Size

“B” Dash Size

“C” Pipe Size

AERFCM2183 AERFCM2184

-6 -8

-6 -8

1/8" 1/8"

A

AERFBM1389 ..........................................-06 AERFBM1387 ..........................................-08

B C

45° Elbow SAE Male Inverted Flare Part No.

Hose and Fitting Dash Size

AERFBM1382 ...........................................-06

Actual Thread Sizes Pipe Thread

90° Elbow SAE Male Inverted Flare Part No.

Hose and Fitting Dash Size

AERFBM1392 ........................................... -06

AN Fittings

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

73


performance

Shock Absorbers

E

AFCO has the ideal shock for any application, in fact many of today’s top teams rely solely upon AFCO for the winning set-up. AFCO shocks have a proven performance advantage. Part No.

Stroke

Valving

A Fixed Bearing Steel Body AFC1273FB 7" 3 AFC1274FB 7" 4 AFC1275FB 7" 5 AFC1275-3FB 7" 5/3 AFC1276FB 7" 6 AFC1276-2FB 7" 6/2 AFC1276-4FB 7" 6/4 AFC1277FB 7" 7 AFC1279-1FB 7" Damper AFC1293FB 9" 3 AFC1293-5FB 9" 3/5 AFC1294FB 9" 4 AFC1295FB 9" 5 AFC1296FB 9" 6 AFC1297FB 9" 7 B Small Steel Body AFC1573-5 7" 3/5 AFC1574 7" 4 AFC1575 7" 5 AFC1575-3 7" 5/3 AFC1576 7" 6 AFC1576-2 7" 6/2 C Steel Body AFC1073-5 7" 3/5 AFC1074 7" 4 AFC1074-6 7" 4/6 AFC1075 7" 5 AFC1075-3 7" 5/3 AFC1076 7" 6 AFC1079-1 7" Damper AFC1076-2 7" 6/2 AFC1076-4 7" 6/4 AFC1093 9" 3 AFC1093-5 9" 3/5 AFC1094 9" 4 AFC1095 9" 5 D Take-Apart Steel Body AFC1973-5 7" 3/5 AFC1974 7" 4 AFC1975 7" 5 AFC1976 7" 6 AFC1993 9" 3 AFC1993-5 9" 3/5 AFC1994 9" 4

Compression

F

Extension

12-3/8" 12-3/8" 12-3/8" 12-3/8" 12-3/8" 12-3/8" 12-3/8" 12-3/8" 12-3/8" 14-3/8" 14-3/8" 14-3/8" 14-3/8" 14-3/8" 14-3/8"

19-1/4" 19-1/4" 19-1/4" 19-1/4" 19-1/4" 19-1/4" 19-1/4" 19-1/4" 19-1/4" 23-1/4" 23-1/4" 23-1/4" 23-1/4" 23-1/4" 23-1/4"

12.70" 12.70" 12.70" 12.70" 12.70" 12.70"

19.70" 19.70" 19.70" 19.70" 19.70" 19.70"

12.75" 12.75" 12.75" 12.75" 12.75" 12.75" 12.75" 12.75" 12.75" 14.75" 14.75" 14.75" 14.75"

19.50" 19.50" 19.50" 19.50" 19.50" 19.50" 19.50" 19.50" 19.50" 23.50" 23.50" 23.50" 23.50"

12.75" 12.75" 12.75" 12.75" 14.75" 14.75" 14.75"

19.50" 19.50" 19.50" 19.50" 23.50" 23.50" 23.50"

A

B

C

D

Valving

Compression

Extension

E Aluminum Smooth Body/Smooth Rod End AFC1171-9S 7" Damper 13.00" 20.00" AFC1171-14S 7" Damper 13.00" 20.00" AFC1175S 7" 5 13.00" 20.00" AFC1175-3S 7" 5/3 13.00" 20.00" AFC1179-1S 7" Damper 13.00" 20.00" AFC1195S 9" 5 15.00" 24.00" F Aluminum Threaded Body AFC1373T 7" 3 13.00" 20.00" AFC1373-5T 7" 3/5 13.00" 20.00" AFC1374T 7" 4 13.00" 20.00" AFC1375T 7" 5 13.00" 20.00" AFC1375-3T 7" 5/3 13.00" 20.00" AFC1376T 7" 6 13.00" 20.00" AFC1390T 9" Dummy 15.00" 24.00" AFC1393T 9" 3 15.00" 24.00" AFC1393-5T 9" 3/5 15.00" 24.00" AFC1394T 9" 4 15.00" 24.00" AFC1395T 9" 5 15.00" 24.00" AFC1395-3T 9" 5/3 15.00" 24.00" G Aluminum Small/Smooth Body AFC1664S 6" 4 11.75" 17.75" AFC1665S 6" 5 11.75" 17.75" AFC1674S 7" 4 12.75" 19.75" AFC1675S 7" 5 12.75" 19.75" AFC1675-3S 7" 5/3 12.75" 19.75" AFC1676-2S 7" 6/2 12.75" 19.75" AFC1684S 8" 4 13.75" 21.75" AFC1684-7S 8" 4/7 13.75" 21.75"

Part No.

Rod ends listed are compatible with all shocks built after 3-1-03. Description

Stroke

G

Coil-Over Kits

Shock Absorber Replacement Rod Ends Part No.

Part No.

AFC1004

AFC1004................Aluminum Shock Rod End With Bearing AFCBR31036 ........Aluminum Double Adj. Shock Rod End w/Bearing AFCBR31036-1 ....Aluminum Adjustable Shock Rod End With Bearing, 1" Longer AFCBR31036-2 ....Aluminum Adjustable Shock Rod End With Bearing, 2" Longer AFC20179 .............Standard Aluminum Shock Rod End, 1" Longer AFC20179-1 .........Standard Aluminum Shock Rod End, 2" Longer

Description

AFC20125A-7K

5" OD Kit AFC20125A-7K.......... 5" Conversion Kits (7" Sleeve) 2.5" OD Kits AFC20124 ................... 2.5" Kit For Alum. Threaded Body Shocks (5" Sleeve) AFC20125A ................ 2.5" Kit For Steel Body/Take-Apart Shocks (5" Sleeve) AFC20125A-7 ............ 2.5" Kit For Steel Body/Take-Apart Shocks (7" Sleeve) 1.875" OD Kit AFC20125SB .............. 1.875" Kit For Steel Small Body Shocks (5" Sleeve) Replacement Components AFC20131A ................ Adjuster Nut For Aluminum Threaded Body Mono Tube Shocks AFC20128A ................ Spring Seat For AFCO Aluminum Shocks AFC10243 ................... Spring Clip For AFC20128A or AFC20129 AFC20144 ................... Coil-Over Adjuster Nut Bearing Kit, Pair

Spanner Wrench Shock Extensions

AFC20110

Part No.

Relax the spring pressure and use the wrench to adjust coilover nuts.

Description

AFC20180 .............Standard Shock, 9/16", 1" Extension AFC20180-1 .........Standard Shock, 9/16", 2" Extension

74

AFC20180

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Steering Quickener

Each yellow Afcoils spring is engraved with the specified rate and includes warranty card.

Lightweight, slotted housings permit backlash adjustment for smoother operation, and are fitted with thrust bearings and heat treated gears.

Rate

10" Tall

12" Tall

14" Tall

125 150 175 200 225 250 275 300 325 350 375 400 425 450 475 500 525 550 600 650

AFC23125 AFC23150 AFC23175 AFC23200 AFC23225 AFC23250 AFC23275 AFC23300 AFC23325 AFC23350 AFC23375 AFC23400 AFC23425 AFC23450 AFC23475 AFC23500 AFC23525 AFC23550 AFC23600 AFC23650

AFC22125 AFC22150 AFC22175 AFC22200 AFC22225 AFC22250 AFC22275 AFC22300 AFC22325 AFC22350 AFC22375 AFC22400 AFC22425 AFC22450 AFC22475 AFC22500 AFC22525 AFC22550 AFC22600 –

AFC24125 AFC24150 AFC24175 AFC24200 AFC24225 AFC24250 AFC24275 AFC24300 AFC24325 AFC24350 – – – – – – – – – –

Part No.

performance

2-5/8" Dia. Coil-Over Springs

Description

AFC38051 .............Steering Quickener, 2:1

Racing Radiators Aluminum radiators have furnace brazed cores with 16 fins per inch for maximum air flow and cooling. Each radiator has “mount type flanges” for simplified installation. Part No.

Description

AFC80100N Chevy 22" x 19" AFC80100FN Ford 22" x 19" AFC80101N Chevy 27-1/2" x 19" AFC80101FN Ford 27-1/2" x 19" AFC80102N Chevy 31" x 19" AFC80103N Chevy 26" x 19" AFC80103FN Ford 26" x 19"

Inlet

Outlet

Filler Location

Dry Weight

Left, 1-1/2" Right, 1-1/2" Left, 1-1/2" Right, 1-1/2" Left, 1-1/2" Left, 1-1/2" Right, 1-1/2"

Right, 1-3/4" Left, 1-3/4" Right, 1-3/4" Left, 1-3/4" Right, 1-3/4" Right, 1-3/4" Left, 1-3/4"

Right Left Right Left Right Right Left

12.3 lbs. 11.2 lbs. 14.7 lbs. 13.6 lbs. 15.5 lbs. 14.4 lbs. 13.2 lbs.

Leaf Spring Accessories U-Bolts U-bolts have 4" of threads and fit 3" axle tubes. Include tall nuts for maximum thread engagement and safety. Part No.

Lightweight Racing Radiators Single 1" row, aluminum radiators weigh just 6.3 lbs. and are ideal for cars with limited cooling requirements including those with alcohol fed engines.

Description

AFC20238 .............8" U-Bolts, Pair AFC20238-9 .........9" U-Bolts, Pair

Shackles Part No.

Part No.

Inlet

Outlet

AFC80100LWN Chevy 22" x 19" Left, 1-1/2" Right, 1-3/4"

Description

AFC20235-2 .........Shackle Bolt Kit, Eliminates Rubber AFC20235-2 Bushing in Chrysler Springs AFC20235 .............Aluminum Shackle Plates, Pair AFC20281 .............Steel Shackle Plates, Pair

Leaf Spring Pivot Bushing AFC20229P Replaces rubber bushing in Chrysler leaf springs so front spring eye can rotate and twist for more consistent handling. Leaf Spring Slider AFC20236S Use with Chrysler springs. Replaces traditional shackles so rear spring eye can rotate and twist for improved handling.

AFC20281

Filler Location

Dry Weight

Right

6.3 lbs.

Double Pass Radiators Superior efficiency is delivered by first passing coolant over the top half of the radiator and then the bottom half, allowing the radiator to dissipate more heat than conventional designs. Part No.

Description

AFC80125N AFC80123N

26" x 19" 27-1/2" x 19"

Inlet

Outlet

Filler Location

Dry Weight

Left Left

14.9 lbs. 15.4 lbs.

Right, 1-1/2" Right, 1-3/4" Right, -16AN Right, 1-3/4"

Four Blade Fan AFC80183 The 17-1/2" diameter fan’s blades have a special pitch for maximum air flow. Fits most water pumps with dual bolt pattern.

Lower Spring Plates Steel Plate with shock mount. Part No.

Description

Description

AFC20249 .............LH Spring Plate AFC20250 .............RH Spring Plate AFC20249

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

75


performance

Racing Power Steering Pumps Pumps are modified to reduce horsepower loss and lower operating temperatures while producing the power required for offroading. Assemblies are available in steel and aluminum and are complete with reservoir and lightweight aluminum pulley. Part No.

Description

AGR802226P Steel Pump Assemblies AGR802226P........High Flow Assembly, 1250 PSI AGR802314P........Medium Flow Assembly, 1100 PSI Aluminum Pump Assemblies AGR804226P........High Flow Assembly, 1250 PSI AGR804314P........Medium Flow Assembly, 1100 PSI Note: High Flow Assemblies listed are engineered for use with steering quickeners.

Power Steering Reservoir AGR960250 Replacement reservoir is designed for AGR power steering pumps.

Racing Steering Boxes Tri-Bearing design offers precise handling and superior durability. GM 3-bolt style boxes are built with billet aluminum end caps and polished top covers. The GM 4-bolt box is a heavier unit. All boxes have 13/16" x 36-Spline. Part No.

Rock Ram System Off the road or on the highway, AGR Rock Ram Performance Power Steering Systems provide superior handling and outstanding durability thanks to the exclusive AGR Tri-Bearing Design. Light valving and quick 16:1 ratio produce 100% more power and excellent handling characteristics. Purchase the entire system, or individual components.

Super Pump - SP Pump Bolt-on replacement for Saginaw Type “P” pumps, which are easily identified because the pump is actually fitted in the reservoir. Pump produces the highest pressure and flow without compromising durability and is required with Super Boxes 1 and 2. Reservoir is not included and a fluid cooler is recommended.

Super Box - SB2 Series Box has firmer valving and a variable ratio for better driveability at highway speeds. For the off-roader who also uses the vehicle as a daily driver.

S Box - S Series Light valving and a 20:1 ratio offer the off-road enthusiast reduced steering effort and maximum power assist.

Description

AGR2012B250 ......................GM 3-Bolt, 12:1, .250 Valve AGR2012B280 ......................GM 3-Bolt, 12:1, .280 Valve AGR2014B220 ......................GM 3-Bolt, 14:1, .220 Valve AGR2112B235 ......................GM 4-Bolt, 12:1, .235 Valve SWE401-50611 ....................Sweet U-Joint 13/16 x 36-Spline

SV Box - SV Series A steering gear with the firm feel of the new GM trucks and excellent driveability at highway speeds. Valving is firm and the ratio is variable between 17:1 and 13:1.

Stealth Racing Steering Boxes Stock appearing steering box has custom internals, billet aluminum top covers and caps. 13/16" x 36-Spline. Part No.

Description

AGR2512B220 ......................12:1 .220 Valve AGR2512B250 ......................12:1 .250 Valve AGR2512B280 ......................12:1 .280 Valve, (Hard, Most Feel) AGR2514B250 ......................14:1 .250 Valve AGR2516B185 ......................16:1 .185 Valve, (Soft, Less Feel) SWE401-50611 ....................Sweet U-Joint 13/16 x 36-Spline

SEE NEXT PAGE FOR SPECIFIC VEHICLE APPLICATIONS

“Budget Steering Box” AGR2914A210 Economical box lacks the tri-bearing design and AN fittings but is ideal for use with a quickener. Unit is remanufactured, with 3/4" 30-Spline, 14:1 ratio and .210 valving.

76

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


performance

Chevrolet/GMC Truck and SUV Applications A direct replacement with improved reliability and driveability for Chevy/GMC 4-wheel drive pickups, Suburbans and SUV’s.. Year

Description

SP Pump

1980-91

All

AGR807256

1988-98

All w/ Old Body Style

AGR807256

SP Pump

Note: If replacing the old style pump (pre-75) with a pulley retained by a nut, it must be replaced by press-on style pulley.

Dodge Truck and SUV Applications Originally developed for ‘94-’01 Cummins Diesel applications, the S Series/Super Pump package will also work on gas powered models from the same years and provide more reliability, durability, and handling. Year

Description

S Pump

1994-01

Gas Engine

AGR807256

S Series

Ford Truck and SUV Steering Boxes AGR only offers a remanufactured OEM steering box for Ford trucks, limiting offerings for high performance use. The best way to improve performance is to supplement the AGR steering gearbox with an AGR Super Pump. The only other components needed for the swap are the Saginaw type pump mounting brackets and a pulley which can be found on 1975-88 Ford Econolines. Year

Description

Ford Box

Ford Pump

1980-89

w/o Hydroboost

AGR213678

1990-96

w/o Hydroboost

AGR213678

AGR809156

SV Series

Jeep Applications F/S Cherokee, F/S Wagoneer, J-10, J-20 Year

Description

SB 2

SP Pump

Ram System

1980-92

All

AGR262352

AGR807256

w/o Remote Reservoir

AGR262352

AGR807256

AGR362251K07

w/Remote Reservoir

AGR262352

2.5L engine

AGR262352

AGR362251K07

4.0L engine

AGR262352

AGR362251K07

2.5L engine

AGR262352

AGR362551K07

XJ Cherokee, MJ Comanche 1984-86

1987-90

1991-96

1997-99

4.0L engine

AGR262352

AGR362551K07

2.5L engine

AGR262352

AGR362251K07

4.0L engine

AGR262352

AGR362251K07

AGR362256K07

CJ5, CJ7, Commando, Wrangler YJ & TJ 1980-86

All

AGR262357

AGR807256

1987-90

All

AGR262352

AGR807256

AGR362251K07

1991-96

All

AGR262352

AGR362251K07

w/4 cyl. engine

AGR262352

AGR362251K07

w/6 cyl. engine

AGR262352

AGR362251K07

1997-98

SB2 Series

*Note If replacing the old style pump (pre 75) with a nut retained pulley it must be replaced by a new press on pulley. **Note The Rock Ram system includes a Super pump that must be used. If stock motor is still in place, brackets will need to be fabricated to accept Super Pump.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

77


performance

Revolutionary On Board Air Control

57000 Series The Air Lift Super Duty system is ideal for Class A, B, & C motor homes, and 3/4 and 1 ton pickups. Maximize ride comfort and Increase capacity. Kits include: air springs, inflation valves, lines, fittings, brackets, hardware and illustrated instructions. Air adjustable from 5 to 100 psi for up to 5,000 lbs. of leveling capacity. Lifetime Warranty

59500 Series The Air Lift Ride Control System fits leaf springs applications and is ideal for mini and 1/2 ton pickups, SUVs, and vans used for light to medium hauling. Alignment tool provided for accurate and easy installation. Kits include: air springs, lines, fittings, brackets, hardware and illustrated instructions. Air adjustable from 10 to 100 psi for up to 2,000 lbs. leveling capacity. *59600 Series Kits include an on-board compressor kit. Lifetime Warranty

60000-80000 Series Fits coil spring (front and rear) for minivans, SUVs and motor homes (front) used for hauling cargo or light towing. Adds excellent front end support for pickups with snowplows and improves ride and handling. Kits include: air springs, lines, fittings, brackets, hardware and illustrated instructions. Air adjustable for up to 1,000 lbs. of leveling capacity. *Lifetime Warranty *Never exceed manufacturer’s Gross Vehicle Weight Rating.

AIR72000 • Easiest installation ever — no lines or wires to the cab! • Wireless handheld unit for convenient operation in or outside the vehicle • Automatically maintains set pressures • Two user-defned memory buttons allow for frequently used settings • Kit includes compressor, manifold and control box — everything you need!

AIR25812-Dual Gauge (Manual System) Air Lift’s most popular accessory for cars, pickups and vans. Allows side-to-side as well as front to-rear leveling and contains a 5 psi Low Pressure Sensor. Ready air supply - no need to hunt for a service station. Level the vehicle with a flick of the finger. Kit includes: 12 volt compressor, dual lighted dash panel with separate inflate/deflate controls and 0-100 psi gauge, air line, fittings, all hardware for complete installation, and detailed illustrated instructions.

AIR25655 - Single Gauge (Manual System) Similar to AIR25651, uses a single gauge panel to adjust both air springs at the same time for the front-to-rear leveling.

AIR25592-Single Gauge (Manual System) Similar to AIR25812, but with one air gauge and control panel. Inflates both air springs with equal pressure. Includes an LPS, keeping pressure at a safe minimal level 5 psi.

SmartAir Automatic Leveling System AIR25430 - Dual Sensor (Automatic System) The first “SMART” selfcontrolled rear air spring leveling system for ., slidein campers, work trucks and others where front-toback control is important. Electronically determines the change in level ride height and adds or releases air pressure accordingly. Easy to install: 2-3 hours. Kit includes all necessary components with detailed illustrated instructions.

Standard limited lifetime air spring warranty— no mileage restriction! Air Lift Company warrants that Air Lift 1000, RideControl and LoadLifter 5000 air springs systems will be free from defects in workmanship or materials for the lifetime of the vehicle of original installation. This does not include installation or other service charges for replacement.

No-risk ride satisfaction guarantee exclusively from Air Lift. Ride on Air Lift’s air springs for 60 days. We guarantee you’ll be happy with the improvement in road comfort and load handling. If you’re not satisfied, you may remove the products and return to your dealer for a full refund of your purchase price within the first 60 days after your purchase.

78

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Description

Rear Part No.

Chevrolet/GMC 1999-07

Silverado/Sierra 1500 Classic • 2 And 4WD

AIR59501

2007-08

Silverado/Sierra 1500 New Body (Not long box) • 2 And 4WD

AIR59565

1999-04

Silverado/Sierra 2500 3/4 Ton Pickup (Except 2500 HD) • 2 And 4WD

AIR57250

2001-08

Silverado/Sierra 2500 HD And 3500 1 Ton Pickup • 2 And 4WD

AIR57275

Dodge 2002-08

Ram 1500 1/2 Ton Pickup • 2 And 4WD

AIR59551

1994-02

Ram 2500 And 3500 4WD (Single And Dual Rear Wheel) • 2 And 4WD

AIR57215

2003-08

Ram 3500 (Single And Dual Wheel) • 2WD

AIR57297

2003-08

Ram 2500 And 3500 (Single And Dual Rear Wheel) • 4WD

AIR57295

2004-07

F-150 1/2 Ton Pickup (New Body) • 2 And 4WD

AIR59544

1997-04

Heritage F-150 1/2 Ton Pickup • 2 And 4WD

Standard limited lifetime air spring warranty— no mileage restriction! Air Lift Company warrants that Air Lift 1000, RideControl and LoadLifter 5000 air springs systems will be free from defects in workmanship or materials for the lifetime of the vehicle of original installation. This does not include installation or other service charges for replacement.

Ford AIR59501

1997-04

Heritage F-150 with 5th wheel hitch • 2 And 4WD

1999-08

F250 And F350 Underframe kit (Fits all bed hitches) • 2 And 4WD

AIR59542

1969-04

F-250 3/4 Ton And F-350 1Ton Pickup • 2 And 4WD

AIR57215

2005-08

F-250 And F-350 • 2 And 4WD

AIR57212

No-risk ride satisfaction guarantee exclusively from Air Lift. Ride on Air Lift’s air springs for 60 days. We guarantee you’ll be happy with the improvement in road comfort and load handling. If you’re not satisfied, you may remove the products and return to your dealer for a full refund of your purchase price within the first 60 days after your purchase.

AIR57294

Toyota 2007-08

Toyota Tundra • 2 And 4WD

Kits available for all popular tow vehicles – call for your application!

Rod Ends The Pro-Line combines high performance with economy. Includes low carbon, hardened and plated ball for corrosion resistance and a carbon fiber race that is integrally molded around the ball. Maintenance-free, Pro-Line rod ends are ideal for suspension and other components. Other Alinabal rod end series are available on a special order basis. Part No.

AIR57299 = no-drill application

Autolite Spark Plugs use a copper center electrode sheathed in nickel chromium alloy to provide superior heat dissipation. A multi-rib insulator reduces the chances of “flash-over”, and a longer insulator, pioneered by Autolite, resists carbon fouling, allowing combustion deposits to burn away.

Call for applications.

Bore x Thread Size

ALI30004722 ....................................5/8" X 5/8" RH Steel ALI30004723 ....................................1/2" X 5/8" RH Steel ALI30004724 ....................................3/4" X 3/4" RH Steel ALI30004730 ....................................5/8" X 5/8" LH Steel ALI30004731 ....................................1/2" X 5/8" LH Steel ALI30004732 ....................................3/4" X 3/4" LH Steel ALI30005063 ....................................1/2" X 1/2" RH Aluminum ALI30005064 ....................................1/2" X 1/2" LH Aluminum ALI30005067 ....................................5/8" X 5/8" RH Aluminum ALI30005068 ....................................5/8" X 5/8" LH Aluminum ALI30005108 ....................................1/2" X 5/8" LH Aluminum ALI30005107 ....................................1/2" X 5/8" RH Aluminum ALI30005073 ....................................3/4" X 3/4" RH Aluminum ALI30005074 ....................................3/4" X 3/4" LH Aluminum ALI30005077 ....................................5/8" X 3/4" RH Aluminum ALI30005078 ....................................5/8" X 3/4" LH Aluminum

Spark Plug Gap Tool ALL96515 To set consistent plug gap. Insert plug into holder, put feeler gauge between ground strap and electrode, and the gently turn knurled knob until feeler gauge is snug.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

79

performance

Year


performance

AIRAID® INTAKE SYSTEMS are specifically designed to take full advantage of today’s vehicle technology. The greater the efficiency level, the greater the horsepower output! All AIRAID® kits are installer-friendly. Usually 30 minutes or less is all it takes, with no drilling, cutting or fabrication to contend with. A few common hand tools are all that’s necessary to complete an AIRAID® upgrade.

Model

Part Number

System Type

Intake Tube Included

Year

Engine

Escalade

1999-00

5.7L Vortec

ARA200-102

AC

Y

Escalade

2002-04

5.3L, 6.0L

ARA200-112-1

CAD

N

Escalade

2002-04

5.3L, 6.0L

ARA200-145

CAD

Y

Escalade ESV

2003-04

6.0L

ARA200-145

CAD

Y

Cadillac

Escalade EXT

2002-04

6.0L

ARA200-145

CAD

Y

Escalade ESV, EXT

2005-06

5.3L & 6.0L**

ARA200-185

CAD

Y

Escalade ESV, EXT

2005-06

5.3L & 6.0L**

ARA200-112-1

CAD

N

Escalade ESV, EXT

2007-08

6.2L

ARA200-196

CAD

N

Escalade ESV, EXT

2007-08

6.2L**

ARA200-197

CAD

Y

Avalanche 1500

2002-04

5.3L

ARA200-112-1

CAD

N

Avalanche

2005-06

5.3L**

ARA200-185

CAD

Y

Avalanche

2005-06

5.3L**

ARA200-112-1

CAD

N

Avalanche

2007-08

5.3L

ARA200-196

CAD

N

Avalanche

2007-08

5.3L**

ARA200-197

CAD

Y

Avalanche 2500

2002-06

8.1L Vortec

ARA200-112-1

CAD

N

Blazer

1996-04

4.3L V6

ARA200-108

AC

Y

AIRAID Classics improve vehicles with limited airflow to the original filter. The key to performance is moving the filter to a location with maximum airflow.

ARA200-102

Chevrolet

Blazer

1996-04

4.3L V6

ARA200-108

QF

N

S10 PU

1996-04

4.3L V6

ARA200-108

AC

Y

S10 PU

1996-04

4.3L V6

ARA200-133

QF

N

Silverado

1999-04

4.3L, 4.8L, 5.3L, 6.0L, 8.1L

ARA200-112-1

CAD

N

Silverado

1999-04

4.8L, 5.3L, 6.0L

ARA200-145

CAD

Y

Silverado 1500, SS, Vortec Max Models

2005

4.8L, 5.3L, 6.0L

ARA200-196

CAD

Y

Silverado 1500, SS, Vortec Max Models

2005

4.3L, 4.8L, 5.3L, 6.0L

ARA200-112-1

CAD

Y

Silverado 1500, SS, Vortec Max Models

2006-07

4.8L, 5.3L, 6.0L**

ARA200-197

CAD

Y

Silverado 1500, SS, Vortec Max Models

2006-07

4.3L, 4.8L, 5.3L, 6.0L**

ARA200-168

CAD

Y

Silverado 1500 (New Body Style)

2007-08

4.3L, 4.8L, 5.3L, 6.0L

ARA200-196

CAD

N

Silverado 1500 (New Body Style)

2007-08

4.3L, 4.8L, 5.3L, 6.0L**

ARA200-197

CAD

Y

Silverado HD 1500, 2500, And 3500

2005-07

5.3L, 6.0L

ARA200-169

CAD

Y

Silverado HD 1500, 2500, And 3500

2005-07

5.3L, 6.0L, 8.1L

ARA200-168

CAD

N

Silverado HD 2500/3500 Diesel

2004

6.6L Duramax LLY

ARA200-154

CAD

Y

Silverado HD 2500/3500 Diesel

2005

6.6L Duramax LLY

ARA200-167

CAD

Y

Silverado HD 2500/3500 Diesel

2006-07

6.6L Duramax LLY & LBZ

ARA200-187

CAD

N

Silverado

2007-08

6.6L Duramax LLM

ARA200-215

CAD

N

The CAD series is setting new standards in automotive performance and innovation for vehicles with an original filter location that provides maximum airflow. The CAD helps keep hot air away from the filter for a much denser airflow charge.

ARA200-123

The QF series intakes are based on a CAD design, but are engineered to fit in the original filter base using the stock mounting clips and clamps. The QF installs in just minutes with the ease of replacing a stock filter.

ARA350-160

System Types: AC = Airaid Classic. CAD = Cool Air Dam. QF = Quick Fit. **- With Electric Fan. ++- Will not fit with optional AWT Performance Package

80

Note A*- Fits Duramax equipped vehicles manufactured before 12/15/2003.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


System Type

Intake Tube Included

ARA200-112-1

CAD

N

ARA200-145

CAD

Y

4.8L, 5.3L**

ARA200-185

CAD

Y

4.8L, 5.3L**

ARA200-112-1

CAD

N

2007-08

4.8L, 5.3L, 6.0L

ARA200-196

CAD

Y

Suburban, Tahoe

2007-08

4.8L, 5.3L, 6.0L

ARA200-197

CAD

Y

Suburban, 2500

2007-08

4.8L, 5.3L, 6.0L

ARA200-197

CAD

Y

Tahoe

1999-04

4.8L, 5.3L

ARA200-112-1

CAD

N

Tahoe

1999-04

4.8L, 5.3L

ARA200-145

CAD

Y

Model

Year

Engine

Part Number

Suburban

2000-04

5.3L, 6.0L, 8.1L

Suburban

2000-04

5.3L, 6.0L

Suburban

2005-06

Suburban

2005-06

Suburban (New Body Style)

Chevrolet - Cont.

AIRAID Classics improve vehicles with limited airflow to the original filter. The key to performance is moving the filter to a location with maximum airflow.

ARA200-102

Tahoe

2005-06

4.8L, 5.3L**

ARA200-185

CAD

Y

Tahoe

2005-06

4.8L, 5.3L**

ARA200-112-1

CAD

N

Tahoe (New Body Style)

2007-08

5.3L, 6.0L

ARA200-196

CAD

Y

Dakota

1997-03

3.9L V6

ARA300-107

AC

Y

Dakota

1997-03

5.2L, 5.9L

ARA300-107

AC

Y

Dakota

2005-08

4.7L

ARA300-175

QF

Y

Durango

1997-03

5.2L, 5.9L

ARA300-107

AC

Y

Durango

2000-03

4.7L

ARA300-151

QF

Y

Durango

2004-07

5.7L Hemi

ARA300-156

QF

Y

Magnum

2005-07

5.7L Hemi

ARA350-160++

QF

N

Magnum, SRT8

2005-07

5.7L Hemi, 6.1L Hemi

ARA350-199

CAD

Y

Ram

2006-07

4.7L

ARA300-191

QF

Y

Ram

1994-01

3.9L, 5.2L, 5.9L

ARA300-106

CAD

Y

Ram

2002-05

3.7L, 4.7L

ARA300-125-1

QF

N

Dodge

Ram

2002-03

5.9L Gas Engine

ARA300-125-1

QF

N

Ram

2003-08

5.7L Hemi

ARA300-190

QF

N

Ram

2003-08

5.7L Hemi

ARA300-192

QF

Y

Ram

2006-08

4.7L

ARA300-192

QF

N

Ram

2006-08

4.7L,5.7L Hemi

ARA300-190

QF

Y

Ram

2006-08

5.7L Hemi

ARA300-192

QF

N

Ram Cummins Diesel

1994-02

5.9L

ARA300-139

QF

N

Ram Cummins Diesel

2003-04

5.9L

ARA300-128

QF

N

Ram Cummins Diesel

2003-04

5.9L

ARA300-147

QF

Y

Ram, Cummins Diesel

2004-07

5.9L “600 Series

ARA300-159

CAD

Y

Ram Cummins Diesel

2007-08

6.7L

ARA300-209

CAD

Y

The CAD series is setting new standards in automotive performance and innovation for vehicles with an original filter location that provides maximum airflow. The CAD helps keep hot air away from the filter for a much denser airflow charge.

ARA200-123

The QF series intakes are based on a CAD design, but are engineered to fit in the original filter base using the stock mounting clips and clamps. The QF installs in just minutes with the ease of replacing a stock filter.

System Types: AC = Airaid Classic. CAD = Cool Air Dam. QF = Quick Fit. **- With Electric Fan. ++- Will not fit with optional AWT Performance Package

ARA350-160

Note A*- Fits Duramax equipped vehicles manufactured before 12/15/2003.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

81

performance

AIRAID® INTAKE SYSTEMS are specifically designed to take full advantage of today’s vehicle technology. The greater the efficiency level, the greater the horsepower output! All AIRAID® kits are installer-friendly. Usually 30 minutes or less is all it takes, with no drilling, cutting or fabrication to contend with. A few common hand tools are all that’s necessary to complete an AIRAID® upgrade.


performance

SYNTHAFLOW - ALL AIRAID速 Premium Filters use a synthetic filtration media called SynthaFlow速. A synthetic micro-fiber material that traps the smallest dirt particles that ordinary cotton-gauze "performance" filters can't capture. Based on SAE standards, AIRAID速 Premium Filters, with SynthaFlow, capture almost twice the percentage of 2 micron particulates, and more than six times the amount of 0.5 micron particulates compared to our competitors' filters. Constructed using the finest materials available today. It utilitizes a hand-poured urethane body that won't crack, curl or shrink like other rubber or t units used by our competitors. They have material and multiple cotton gauze layers. 100% washable and reusable, have Lifetime "No-Hassle" Warranty.

Model

Year

Engine

Part Number

System Type

Intake Tube Included

Ford Excursion

2000-04

5.4L, 6.8L

ARA400-222

QF

N

Excursion

2000-03

7.3L Power Stroke Diesel

ARA400-122

QF

N

Excursion

2003-05

6.0L Power Stroke Diesel

ARA400-131-1

QF

Y

Expedition w/Black Tube

1997-04

4.6L, 5.4L

ARA400-109

AC

Y

F-150 (Black Tube)

1997-03

4.6L, 5.4L

ARA400-109

AC

Y

F-150 (Black Tube)

2004

4.6L, 5.4L Heritage Only

ARA400-109

AC

Y

F-150

2004-06

4.6L, V8

ARA400-162

CAD

Y

F-150

2007-08

4.2L, 4.6L

ARA400-141-1

CAD

Y

F-150

2007-08

5,4L, Triton V8

ARA400-140-2

CAD

Y

F-150 (Silver Tube)

2004

5.4L 24V Triton

ARA400-140-1

CAD

Y

F-250 Super Duty

1999-04

5.4L, 6.8L

ARA400-114

QF

N

F-250/350 Super Duty

1999-03

7.3L Power Stroke Diesel

ARA400-222

CAD

Y

F-250/350 Super Duty

1999-03

7.3L Power Stroke Diesel

ARA400-122

QF

N

F-250/350 Super Duty

2003-07

6.0L Power Stroke Diesel

ARA400-131-1

CAD

N

F-250/350 Super Duty

2005-07

6.8L V10

ARA400-203

CAD

N

F-250/350 Super Duty

2008

6.4L Power Stroke Diesel

ARA400-614

CAD

N

Canyon

2004-07

2.8L, 2.9L, 3.5L, 3.7L

ARA200-142

QF

Y

Envoy

2002-05

4.2L 6 Cyl

ARA200-126-1

CAD

Y

S15 Sonoma

1996-04

4.3L V6

ARA200-108

AC

Y

S15 Sonoma

1996-04

4.3L V6

ARA200-108

QF

N

Jimmy

1996-04

4.3L V6

ARA200-108

AC

Y

Jimmy

1996-04

4.3L V6

ARA200-108

QF

N

S15 4X4 Crew Cab

2001-01

4.3L V6

ARA200-108

AC

Y

S15 4X4 Crew Cab

2001-01

4.3L V6

ARA200-108

QF

N

Sierra 1500

1999-04

4.3L, 4.8L, 5.3L, 6.0L

ARA200-112-1

CAD

N

Sierra 1500

1999-05

4.8L, 5.3L, 6.0L

ARA200-196

CAD

Y

Sierra 1500

2005-07

4.3L, 4.8L, 5.3L, 6.0L **

ARA200-112-1

CAD

N

Sierra 1500

2005-07

4.8L, 5.3L, 6.0L **

ARA200-197

CAD

Y

Sierra (New Body Style)

2007-08

4.8L, 5.3L, 6.0L

ARA200-196

CAD

N

Sierra (New Body Style)

2007-08

4.8L, 5.3L, 6.0L**

ARA200-197

CAD

Y

Yukon

2000-05

4.8L, 5.3L, 6.0L

ARA200-112-1

CAD

N

Yukon

2000-05

4.8L, 5.3L, 6.0L

ARA200-145

CAD

Y

Yukon XL 2500

2000-06

6.0L

ARA200-145

CAD

Y

Yukon XL 2500

2007-08

6.0L

ARA200-196

CAD

N

Yukon Denali

2001-04

6.0L

ARA200-112-1

CAD

N

Yukon Denali

2001-04

6.0L

ARA200-145

CAD

Y

Yukon Denali XL

2002-04

6.0L

ARA200-112-1

CAD

N

GMC

AIRAID Classics improve vehicles with limited airflow to the original filter. The key to performance is moving the filter to a location with maximum airflow.

ARA200-102

The CAD series is setting new standards in automotive performance and innovation for vehicles with an original filter location that provides maximum airflow. The CAD helps keep hot air away from the filter for a much denser airflow charge.

ARA200-123

The QF series intakes are based on a CAD design, but are engineered to fit in the original filter base using the stock mounting clips and clamps. The QF installs in just minutes with the ease of replacing a stock filter.

System Types: AC = Airaid Classic. CAD = Cool Air Dam. QF = Quick Fit. **- With Electric Fan. ++- Will not fit with optional AWT Performance Package ARA350-160

Note A*- Fits Duramax equipped vehicles manufactured before 12/15/2003.

82

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Model

Year

Engine

Part Number

System Type

Intake Tube Included

GMC - Cont. Yukon Denali XL

2002-04

6.0L

ARA200-145

CAD

Y

Yukon Denali, XL

2005-06

4.8L, 5.3L, 6.0L**

ARA200-185

CAD

Y

Yukon Denali, XL

2005-06

4.8L, 5.3L, 6.0L**

ARA200-112-1

CAD

N

Yukon Denali, XL , New Body Style

2007-08

5.3L, 6.0L, 6.2L

ARA200-196

CAD

N

Denali XL

2007-08

4.8L, 5.3L, 6.2L

ARA200-197

CAD

Y

Sierra 2500/3500

1999-06

6.0L, 8.1L

ARA200-112-1

CAD

N

Sierra HD 2500/3500

1999-06

6.0L

ARA200-145

CAD

Y

Sierra 2500/3500

2004-05

6.6L Duramax “LLY”

ARA200-154

CAD

Y

Sierra HD 2500/3500

2006-07

6.6L Duramax LLY & LBZ

ARA200-189

CAD

N

Sierra 2500/3500

2007-08

6.6L Duramax, LMM

ARA200-215

CAD

N

2003-07

6.0L

ARA200-146

CAD

Y

Hummer H2 H2, SUT

2005-06

6.0L

ARA200-146

CAD

Y

H3

2006-07

3.5L

ARA200-180

QF

N

H3

2007

3.5L, 3.7L

ARA200-180

QF

N

Cherokee (XJ)

1991-01

4.0L 6 Cyl.

ARA310-136

QF

Y

Jeep Commander

2006-08

5.7L Hemi

ARA310-200

QF

Y

Grand Cherokee (WJ)

1999-04

4.0L 6 Cyl.

ARA310-127

QF

N

Grand Cherokee (WJ)

1999-04

4.7L Except H.O.

ARA310-127

QF

N

Grand Cherokee (WJ)

1999-04

4.7L Incl. H.O.

ARA310-148

QF

Y

Grand Cherokee

2003-04

4.7L Except H.O.

ARA310-127

QF

N

Grand Cherokee

2005-08

5.7L Hemi

ARA310-170

QF

N

Grand Cherokee

2006-08

6.1L Hemi

ARA310-170

QF

N

Wrangler (TJ)

1997-03

2.5L 4 Cyl

ARA310-110

AC

Y

Wrangler (TJ)

1997-06

4.0L 6 Cyl

ARA310-110

AC

Y

Wrangler (TJ)

1997-02

2.5L

ARA310-164

CAD

Y

Wrangler (JK)

2007-08

3.8L 6 Cyl

ARA310-208

CAD

Y

2007-08

5.7L

ARA510-213

CAD

Y

AIRAID Classics improve vehicles with limited airflow to the original filter. The key to performance is moving the filter to a location with maximum airflow.

ARA200-102

The CAD series is setting new standards in automotive performance and innovation for vehicles with an original filter location that provides maximum airflow. The CAD helps keep hot air away from the filter for a much denser airflow charge.

ARA200-123

Toyota Tundra

System Types: AC = Airaid Classic. CAD = Cool Air Dam. QF = Quick Fit. **- With Electric Fan. ++- Will not fit with optional AWT Performance Package

The QF series intakes are based on a CAD design, but are engineered to fit in the original filter base using the stock mounting clips and clamps. The QF installs in just minutes with the ease of replacing a stock filter.

ARA350-160

Note A*- Fits Duramax equipped vehicles manufactured before 12/15/2003.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

83

performance

SYNTHAFLOW - ALL AIRAID® Premium Filters use a synthetic filtration media called SynthaFlow®. A synthetic micro-fiber material that traps the smallest dirt particles that ordinary cotton-gauze "performance" filters can't capture. Based on SAE standards, AIRAID® Premium Filters, with SynthaFlow, capture almost twice the percentage of 2 micron particulates, and more than six times the amount of 0.5 micron particulates compared to our competitors' filters. Constructed using the finest materials available today. It utilitizes a hand-poured urethane body that won't crack, curl or shrink like other rubber or plastisol units used by our competitors. They have material and multiple cotton gauze layers. 100% washable and reusable, have Lifetime "No-Hassle" Warranty.


performance

The CoolRide®

RidePro e2®

System consists of an airspring, a shock absorber, and all of the necessary mounting brackets and hardware. The front system shock is usually relocated to the outboard side of the lower control arm. A weld-on or bolt-on bracket mounts the top of the shock to the frame rail. Complete with control arms and bolt on shock mounts.

The RidePro e2 air suspension control system uses voltage based air pressure sensors, a VFD control panel and programming access features to accurately and quickly control ride height adjustments. Ride-height-on-start and three 1 touch ride heights are also featured. Kit includes ECU, air pressure sensors, air tank(s), compressor(s), air line, wiring harness and hardware. Ride Pro e2 can be converted to Leverpro with a simple upgrade kit,

Description

Part No.

1982-03 S10 Chevy Truck................................................................ARTARF5000-LUCA

AirBAR® Dramatically improve the handling and ride quality of rear leaf springequipped muscle cars and pickup trucks. Direct bolt-in replacement AirBAR four link rear suspension attaches to the OEM leaf spring mounts, and no cutting or fabrication is required. Combine an AirBAR system with the Shockwave or CoolRide front suspension for all of the benefits of modern handling and ride technology. Description

Part No.

1982-03 S10 Chevy Truck................................................................ARTABAR11003 1999-06 Silverado/Sierra Includes C Notches .........................ARTABAR11007

Part No.

ARTARC4000e2 ARTARC4100e2 ARTARC4700e2 ARTARC4800e2

Demanding sports car performance and ride from their everyday drivers, today’s sport truck enthusiast has turned to Air Ride Technologies for the best air suspension components available. ShockWaves and CoolRide systems both include Air Ride’s outstanding tubular control arms and the engineering that has made them the class of the field. Part No.

84

Rise Size

Time

Thomas 327 (2) Thomas 327 Viair 400 (2) Viair 400

1/4" 1/4" 3/8" 1/2"

5 Sec. 3 Sec. 2 Sec. 1 Sec.

Advanced air suspension control system incorporates a combination of ride height sensors and air pressure sensors to quickly achieve the selected ride height. LevelPro system features an extruded aluminum ECU with backlit, soft touch buttons for easy programming. Ride-height-on-start and three 1 touch ride heights are also featured. Includes ECU, ride height and air pressure sensors, air tank(s), compressor(s), air line, wiring harness and hardware. Tank Size

ARTARC4000L 3-Gallon ARTARC4100L 5-Gallon ARTARC4700L 5-Gallon ARTARC4800L (2) 5-Gallon

Line Compressor

Rise Size

Time

Thomas 327 (2) Thomas 327 Viair 400 (2) Viair 400

1/4" 1/4" 3/8" 1/2"

5 Sec. 3 Sec. 2 Sec. 1 Sec.

Description

Silverado - 1999-06 ARTARF5007-LUCA

Line Compressor

3-Gallon 5-Gallon 5-Gallon (2) 5-Gallon

LevelPro™

Part No.

StrongArms™

Tank Size

CoolRide® Tubular Upper And Lower Control Arms Bushings, Ball Joints, Airsprings, Shocks, Bolt-on Shock Mounts And All Necessary Fasteners And Mounting Brackets

Battery Disconnect Switch ARC4200 In case of an electrical short or accident, a quick twist of the knob shuts off current to the electrical system. Switch could prevent a fire in the engine compartment or wiring harness. Also makes a good theft deterrent.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Built with ease of installation in mind, each of the major branch circuits has a quick connect plug close to the fuse panel for easy mounting. Once panel is located, connect the wires with the quick connect plugs. Kit includes all wiring, flashers, relays and tie wraps. Description

Part No.

Power Plus 18 Circuit Wiring System ..................... AAW500232 Power Plus 12 Circuit Wiring System ..................... AAW500230

performance

Power Plus Integrated Fuse Box Systems

Accessories Universal Relay Kit AAW500142 Protects sensitive switches that cannot ordinarily handle high amperage. This relay protects sensitive switches and still gets the job done.

Universal WaterProof Relay Kit AAW500093

Highway 15 Modular System AAW500703 The same high quality but with 15 output connections, protected by 9 fused circuits and secured by a self-locking screw terminal. MicroRelays are provided for horn and turn signal flasher and the headlight circuit is protected by an internal circuit breaker. The Highway 15 Modular Panel includes all the high temperature, XLPE wire, terminals and connectors to do the job right. It's the perfect replacement harness for the pre-1980 truck and fits easily behind kick panels or under seats.

Water-resistant 5 contact relay can be used underhood for electric fan and fuel pump. Includes wiring for normally closed circuit making it adaptable as an anti-theft relay.

Temperature Controlled Fan Relay System When ignition switch is on, relay will trigger fan at 190 degrees and turn it off at 180 degrees. Switch has 3/8”-18 threads to fit cylinder head or intake manifold. Complete with 30 amp fuse and instructions. Description

Highway 22 Modular System

AAW500067

Part No.

Fan Relay.........................AAW500067 Sending Unit .................AAW500491 AAW500491

AAW500695 Between old age and years of amateur splicing (and dicing), the original wiring harness is probably not only non-functional, but downright unsafe. The Highway 22 Modular Panel Wiring System offers 22 output connections protected by no less than 9 fused circuits. EFI-ECM feeds provide easy connection to most electronic fuel injection systems. Heavy gauge lead wires are provided for headlights, taillights, ignition, accessories, etc. and all wires are secured by a self-locking screw terminal. With this kit, every truck project can become a turn key adventure! The Highway 22 Modular Panel System, designed to promote flexibility and easy installation, can be mounted anywhere.

Miscellaneous Electrical Components Description

Part No.

Headlight Switch w/Billet Knob ...................................................AAW500341 Billet Knob for 3/16” dia. Shaft ......................................................AAW500236 HD Blade Type Ignition Switch w/Terminals............................AAW500456 4 Position Ignition Switch w/Billet Knob and Bezel ..............AAW500006 Universal Relay Kit w/Mounting Base and Wiring .................AAW500142 Universal Waterproof Relay Kit w/Wiring..................................AAW500093 Add-A-Fuse 4 Circuit Block .............................................................AAW500267 Under Dash Courtesy Light Kit w/Wiring..................................AAW500081 Inline Waterproof Fuse Holder for ACT/ATO Fuses ................AAW500094 GM HEI Distributor Ignition Terminal .........................................AAW500204 GM HEI Distributor Tach Terminal................................................AAW500205 Red 5/32” dia. L.E.D. Light ...............................................................AAW500215 Green 5/32” dia. L.E.D. Light...........................................................AAW500214 Amber 5/32” dia. L.E.D. Light .........................................................AAW500213 Ultra-Bright 1157 Tail Light Bulb (Ea.).........................................AAW500051 Ultra-Bright 1156 Tail Light Bulb (Ea.).........................................AAW500052

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

AAW500215/16/17

AAW500051

85


performance

SC400 4-Piston Billet Aluminum Brake Calipers

Recirculation Tubes Part No.

Rigid, billet aluminum calipers with 1.87"/1.75" pistons have low deflection, improved pedal feel and exceptional performance. Designed for 1.25" thick rotors with PFR 7751/Hawk 101 pad shape. Part No.

Description

Piston Dia.

Rotor Thickness

APB1902750 APB1902751

SC400 Caliper, RH SC400 Caliper, LH

1.87"/1.75" 1.87"/1.75"

1.25" 1.25"

SC200/SC300 4-Piston Brake Calipers Calipers provide increased brake stiffness, low deflection characteristics, improved pedal feel and reliability. Calipers incorporate the latest high temperature piston seals for durability, stainless steel pistons prevent heat transfer to the brake fluid, stainless steel pad abutments and bridge bolt protection. Available for .810" and 1.25" thickness rotors; both use the popular Performance Friction 7751/Hawk 101 pad. Part No.

Description

Piston Dia.

APB1902750 SC300 Front Caliper, RT 1.87"/1.75" APB1902751 SC300 Front Caliper, LT 1.87"/1.75" APB1902844 SC200 Rear Caliper, RT-LL 4/1.25" APB1902845 SC200 Rear Caliper, LT-RL 4/1.25" Note: Refer to brake caliper usage chart below.

Rotor Thickness

1.25" 1.25" 1.25" 1.25"

Description

APB1906054 ........Fit RH Caliper w/1.25" Rotor, Sold Individually APB1906055 ........Fit LH Caliper w/1.25" Rotor, Sold Individually

60-Vane “J-Hook” Brake Rotors Exclusive “J-hook” rotors improve braking performance and are thermally stable with very high cooling efficiency. Rotors use 60 full length vanes that support the entire face of the rotor for excellent strength. Rotors are 1.25" thick and available in 11.75" Dia. (11.1 lbs.) and 12.19" Dia. (12.5 lbs.). Part No.

Description

Thickness

Dia.

Mtg. Holes

APB1901722 APB1901723 APB1901726 APB1901727

60-Vane Rotor, RH J-Hook 60-Vane Rotor, LH J-Hook 60-Vane Rotor, RH J-Hook 60-Vane Rotor, LH J-Hook

1.25" 1.25" 1.25" 1.25"

11.75" 11.75" 12.19" 12.19"

8 8 8 8

28-Vane Brake Rotors Economical 28-vane rotors are precisely ground, heat treated and machine balanced for best performance. Offered in 11.75" dia. only. Part No.

Description

APB1901780 28-Vane Rotor, LH APB1901781 28-Vane Rotor, RH

Thickness

Dia.

Mtg. Holes

Bolt Circle

1.25" 1.25"

11.75" 11.75"

8 8

7.00" 7.00"

LCV Brake ts

BRAKE CALIPER USAGE CHART RT = Right Hand Trailing

RL = Right Hand Leading

LT = Left Hand Trailing

LL = Left Hand Leading

“Trailing” or “Leading” refers to the caliper position in relation to the front of the car. A Right Hand Leading caliper (RL) will mount on the right side of the car, on the front edge of the brake rotor; a Right Hand Trailing caliper (RT) will mount on the rear edge of the brake rotor. Equal bore size calipers (calipers with all four pistons the same size) may be mounted either way. For example: A Right Hand Trailing can be used as a Left Hand Leading, and a Left Hand Trailing can be used as a Right Hand Leading.

Lightweight, yet durable LCV (Long Curved Vane) Brake Rotors feature 28- or 36-vanes, are fully heat treated, ground and balanced for optimum reliability and performance. Part No.

Description

APB1901734 ........RH 12.19" x 1.250", 8-Bolt, 36-Vane APB1901735 ........LH 12.19" x 1.250", 8-Bolt, 36-Vane

AP 600 Hi-Temp Racing Brake Fluid ALL78108

Ground Shipment Only

Designed for extreme, high temperature racing conditions with a dry boiling point in excess of 572°F. Exceeds DOT 3 standards. 1 pint.

AP PRF Brake Fluid ALL78116 Developed for extreme, high temperature racing conditions (dry boiling point of 608° F). Exceeds DOT 4 specifications. Sold in 16.9 oz. bottle. Ground Shipment Only

86

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Drive Flange Bolt Kit ARP200-3401

Kits include the required studs, washers and hex or 12-point nuts. Black oxide coated or stainless steel studs have a unique nut starter radius to prevent cross-threading. The 300-series stainless material is not affected by extreme heat, eliminating retempering. Stud kits listed are rated at 170,000 PSI tensile strength.

ARP’s premium grade chrome moly alloy 12-pt. Drive Plate Bolts are heat treated to 190,000 PSI, gun drilled for light weight and threaded using the J-form thread rolling process. Bolts are 7/16"-14 x 1.500". Kit contains eight bolts and precision-ground washers.

performance

Engine Accessory Stud Kits

Valve Cover Stud Kits Hex Nuts Black Oxide

Application

Stamped Steel Valve Covers 1/4" 8 pcs. w/Nut and Washer 1/4" 14 pcs. w/Nut and Washer Cast Aluminum Valve Covers 1/4" 8 pcs. w/Nut and Washer 1/4" 14 pcs. w/Nut and Washer 1/4" 16 pcs. w/Nut and Washer

Hex Nuts Stainless

ARP200-7603 12-Pt. Nuts Black Oxide

Application

12-Pt. Nuts Stainless

Oil Pan Stud Kits Hex Nuts Black Oxide

Application

SB Chevy 289-302, 351C and 351W Ford

Hex Nuts Stainless

ARP234-1901 ARP434-1901 ARP254-1901 ARP454-1901

Oil Pump Stud Kits Hex Nuts Black Oxide

12-Pt. Nuts Black Oxide

ARP230-7001 ARP230-7002 ARP230-7003 ARP230-7004 ARP154-7005 – ARP150-6902 –

Timing Cover Stud Kits Application

Chevy V8’s w/Hex Nuts

ARP Wheel Studs are made from the finest materials, with up-to-date manufacturing techniques to meet exacting quality standards. ARP Wheel Studs will withstand extreme shear loads up to 190,000 PSI. Sold in packs of five.

ARP200-7603 ARP400-7603 ARP200-7604 ARP400-7604 ARP200-7606 ARP400-7605

SB Chevy, 3/8" dia., 1.670", 12 pc. ARP100-1402 ARP400-1402 Ford, 3/8" dia., 1.670", 16 pc. ARP100-1404 –

SB Chevy SB Chevy 3.125" High Volume Ford, Oil Pump To Pickup Ford, 5/16", 4pcs

Wheel Stud Kits

ARP200-7601 ARP400-7601 ARP200-7602 ARP400-7602

Header Stud Kits

Application

ARP200-7602

Hex Nuts Black Oxide

Hex Nuts Stainless

ARP200-1401 ARP400-1401

Application

Length Thread Size

Knurled Dia.

Part No.

Late GM Drum Brake Late GM Disc & Early Drum Brake Late GM Metric Speedway Eng. Ford Rear Disc Brake/Chrysler Front

3-1/4" 7/16"-20 3-1/4" 7/16"-20 2-1/2" m12 x 1.5 2-15/16" 1/2"-20 3" 1/2"-20

.486" .580" .509" .568" .625"

ARP100-7701 ARP100-7702 ARP100-7708 ARP100-7706 ARP100-7703

Speed Studs Studs have J-form threads, exclusive longer-than-standard nut-starter, and a bullet shaped radius to prevent cross-threading. 5/8"-18 fine thread studs are shot-peened, coated with baked-on dry lube, and double magnafluxed. Rated at 190,000 PSI tensile strength. Sold in packs of five. Application

Length

Part No.

Front w/o Spacer Front w/o Spacer Front w/o Spacer Front w/Spacer Rear w/o Spacer Rear w/o Spacer Rear w/Spacer Extra Long Rear

2.550" 2.650" 2.750" 2.900" 3.150" 3.250" 3.400" 3.600"

ARP300-7711 ARP300-7712 ARP300-7705 ARP300-7706 ARP300-7716 ARP300-7707 ARP300-7708 ARP300-7709

Distributor Stud Kits Application

Black Oxide Chevy Stainless Chevy Ford

Hex Nuts

12-Pt. Nuts

ARP130-1702 ARP130-1701 ARP430-1702 ARP430-1701 ARP450-1702 ARP450-1701

Standard 5/16" x 1.700" OAL Std. w/1-1/2" Spacer, 2.900" OAL 1/2" Spacer, 5/16" x 2.225" 1" Spacer, 5/16" x 2.700" OAL 1-1/4" Moroso Spacer, 3.200" OAL 2" Spacer, 5/16" x 3.700" OAL

5/8"-18 fine thread chrome moly nuts include precision J-formed threads and are profile faced for easy installation and quicker socket releases. Nuts are rated at 190,000 PSI tensile strength and coated with Alumotef III gold coating. Sold in packs of ten.

Fuel Pump Push Rod ARP134-8701

Carburetor Stud Kits Application

Speed Nuts ARP300-7801

Hex Nuts Black Oxide

Hex Nuts Stainless

ARP200-2401 ARP200-2412 APR200-2403 ARP200-2402

ARP400-2401 ARP400-2412 APR400-2403 ARP400-2402

For small block Chevy, 1/2" x 5.750" overall length. Made from aerospace chrome moly and centerless ground after heat treatment. Hollow construction results in light weight and quicker response.

ARP200-2408 ARP400-2408 ARP200-2404 –

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

87


performance

Starter Bolt Kits

Engine Accessory Bolt Kits Kits include the required number of bolts for a particular application, hardened washers and either hex or 12-point nuts. Bolts are either black oxide coated or stainless. The 300 series stainless material is not affected by extreme heat, eliminating the possibility of retempering due to exhaust temperature cycles. All accessory bolt kits are rated 170,000 PSI tensile strength unless specified.

Intake Manifold Bolt Kits High Performance Intake Bolts feature generous flanged bolt heads for even loading and a precisionground, hardened washer to prevent galling and promote accurate torque readings. Hex Black Oxide

Application

SBC 265-400 SBF 289-351W

12-Point Black Oxide

Hex Stainless

Header Bolt Kits Choose from 300-stainless steel, or Black Oxide in either hex or 12-point heads. The 300-stainless material is not affected by extreme heat, eliminating the possibility of retempering due to exhaust temperature cycles. Rated 170,000 psi tensile strength. Application

12-Point Black Oxide

Hex Stainless

Oil Pan Bolt Kits Premium grade fasteners are offered in black oxide or 300-stainless steel, include washers. Hex Black Oxide

SBC Ford 289-351W (Late)

12-Point Black Oxide

Hex Stainless

12-Point Stainless

Flywheel/Flexplate Bolt Kits ARP Flywheel and Flexplate Bolts are forged from aerospace alloy and heat-treated prior to thread rolling and machining. An exclusive 12-point head design, and larger-than-stock shank diameter offer improved register of crank to flywheel/flexplate. High Performance Series rated at 170,00 PSI, Pro Series at 190,000 PSI. Application

ARP100-2801.......Chevy and Ford Flywheel, 7/16"-20 x 1.00", 6 Pcs. (High Perf.) ARP100-2901.......Chevy and Ford Flexplate, 7/16"-20 x .680", 6 Pcs. (High Perf.) ARP200-2802.......Chevy and Ford Flywheel, 7/16"-20 x 1.00", 6 Pcs. (Pro Series) ARP200-2902.......Chevy and Ford Flexplate, 7/16"-20 x .680", 6 Pcs. (Pro Series)

Torque Converter Bolt Kits High performance, 200,000 PSI steel fasteners are engineered for superior torque converter to flexplate retention. Three per pack. Part No.

Application

Thread Lubricants and Sealers Assembly Lubricant

Quality moly-based lubricant resists rust and corrosion, has an effective lubrication range of -30째F to 750째 F., and a load range of 500,000 PSI. Applications include: assembly lube for engine components, press fitting, gear trains and general machining. Thread Sealer

ARP234-1802 ARP234-1801 ARP434-1802 ARP434-1801 ARP254-1802 ARP254-1801 ARP454-1802 ARP454-1801

Balancer Bolt Kits Manufactured from the finest aerospace-quality material, each bolt has a larger diameter, extra tall 12-point head for improved accessibility and easy wrenching. Rated 190,000 psi tensile strength. Part No.

12-Point Stainless

ARP230-7303*.....TH-350/400 10" Conv., ARP230-7301.......TH-350, 11" Conv., 3/8"-24 x .750"

12-Point Stainless

SBC 3/8" Dia. .750" U.H.L., 12 pc. ARP100-1101 ARP100-1201 ARP400-1101 ARP400-1201 SBC 3/8" Dia. .750" U.H.L., Drilled, 12 pc. ARP100-1103 ARP100-1203 ARP400-1103 ARP400-1203 Ford 3/8" Dia. .750" U.H.L., 16 pc. ARP100-1102 ARP100-1202 ARP400-1102 ARP400-1202

Application

Hex Stainless

SBC Stock Starter ARP430-3502 ARP430-3501 SBC High Torque Mini Starter ARP430-3504 ARP430-3503

Part No.

12-Point Stainless

ARP134-2001 ARP134-2101 ARP434-2001 ARP434-2101 ARP154-2001 ARP154-2101 ARP454-2001 ARP454-2101

Hex Black Oxide

Application

Teflon-based lubricant resists rust and corrosion, has an effective lubrication range from -30째F to 550째 F. and a sealant range of 10,000 PSI. Creates a flexible, seal in aluminum, steel, stainless steel and plastic. Coolant, water, gasoline, natural gas and LP Gas resistant. Part No.

Application

ARP100-9902.......Assembly Lubricant 0.5 fl. oz. ARP100-9903.......Assembly Lubricant 1.69 fl. oz. ARP100-9905.......Assembly Lubricant 1 Pint Tube ARP100-9906.......Assembly Lubricant 1/2 Pint Brush Top Can ARP100-9904.......Thread Sealer 1.69 fl. oz.

Application

ARP134-2501.......SBC 7/16" w/5/8" 12-Point Head ARP234-2501.......SBC 7/16" w/13/16" 12-Point Head ARP150-2501.......Ford 5/8" w/5/8" 12-Point Head

Engine and Accessory Fastener Kits Each kits contains: 12-point or hex head bolts and washers for valve covers, oil pan, intake manifold, headers, fuel pump, water pump, front cover, thermostat housing, alternator brackets, coil and distributor brackets, and motor mounts. Black Oxide

Application

Hex

SB Chevy 350-400 SB Ford 289-302 Ford 351W

ARP534-9801 ARP554-9801 ARP554-9803

88

Stainless

12-Point

Hex

ARP534-9701 ARP554-9701 ARP554-9703

ARP534-9601 ARP554-9601 ARP554-9603

12-Point

ARP534-9501 ARP554-9501 ARP554-9503

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


High Performance Series Size

Application

Ratios

Side Gear Spline

Model Years

AUB542072

8-1/4

All Chrysler w/8-1/4 ring

2.71 / up

27 Teeth

1968-Present

AUB542070

9-1/4

All Chrysler w/9-1/4 ring

2.71 / 4.10

31 Teeth

1984-Present

AUB542079

8.8

Fits All 8.8 Car And Truck Axle Appl.

All ratios

28 Teeth

1979-Present

AUB542025

8.8

All Trucks

All ratios

31 Teeth

1983-Present

Part No.

Chrysler

Ford

AUB542051

General Motors AUB542057

7-1/2 & 7-5/8

S-trucks,M-Van

3.23 / up

AUB542058 AUB542040 AUB542041

26 Teeth

1976-1988

7-1/2 & 7-5/8

Same As Above

3.08 / down

26 Teeth

1976-1988

7-1/2 & 7-5/8

Same as above; also 1991 & later Isuzu Rodeo

3.23 / up

28 Teeth

1988-Present

7-1/2 & 7-5/8

Same as above; also 1991 & later Isuzu Rodeo

3.08 / down

28 Teeth

1988-Present

AUB542018

8-1/2

All 8-1/2 10 - Bolt Axles

2.73 / up

28 Teeth

1988 & Prior

AUB542022

8-1/2

Same as above

2.73 / up

30 Teeth

1989-Present

Pro Series Part No.

Size

Applications

Ratios

Side Gear Spline

Model Years

8-3/4

All Chrysler Products With 8-3/4 Ring Gear

2.76-6.14

30 Teeth

1957-1973

Chrysler AUB542051

Ford AUB542054

8.8”

Fits all 8.8 Truck

All ratios

31 Teeth

1983-Present

AUB542036

9”

All Cars And Trucks

All ratios

31 Teeth

1957-1985

AUB542043

9”

All Cars And Trucks

All ratios

28 Teeth

1957-1985

Note: (Ford 8” and 9” PRO SERIES models use Ford Part No. D802-4216-B Ring Gear Bolts or equivalent)

General Motors AUB542050

8-1/2

All 8-1/2 10-bolt axles

2.73 / up

28 Teeth

1988 & Prior

AUB542052

8-1/2

Same As Above

2.73 / up

30 Teeth

1989-Present

AUB542032

8-7/8

12-Bolt Series 4-Truck

3.73 / up

30 Teeth

1964-1982-1/2

AUB542034

8-7/8

12-Bolt Series 3-Truck

2.76 / 3.42

30 Teeth

1964-1982-1/2

AUB542082

Non-C Clip

2.92 / 5.89

30 Teeth

1967-Present

AUB542083

Non-C Clip

2.72 / 3.73

30 Teeth

1967-Present

Dana 44

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

89

performance

Cure traction problems with an Auburn Gear positive traction differential. The High Performance Series delivers superb weight transfer, with more torque delivered to the high traction wheel, even when there is zero traction at the loose wheel. The Pro Series offers ultimate Hi-Bias differential to deliver more torque, traction and faster engagement, even under changing load conditions.


performance

Part No.

(Electronic Controlled Traction Enhancing Differential) Select “limited slip” or “locker” traction modes right from the driver’s seat via a simple “on/off ” switch. Ideal for street/strip applications. When switch is in the “off ” position, the unit operates in conventional limited slip mode where heavy acceleration energizes the clutch pack, directing bias torque to the high traction wheel. When switched to the “on” position, an electromagnetic coil within the unit causes the differential to instantly become a true “locker” unit, with equal power to both rear wheels. Includes on/off switch, wiring harness, coil retainer, friction modifier additive, and installation instructions.

Size

AMC AUB545006 AUB545007 Ford AUB545002 8.8" General Motors AUB545009 8-7/8" AUB545011 8-7/8" Dana 30 AUB545016 AUB545017 Dana 35 AUB545012 AUB545013 AUB545014 AUB545015

Applications

Ratios

Side Gear Spline

Model Years

All AMC 20 Axles All AMC 20 Axles

2.73-Down 3.07-Up

All All

1966-86 1966-86

All 8.8" Except IRS

All

31

1983-Up

30 30

1964-82-1/2 1964-82-1/2

All with 8-7/8" Ring Gear 2.76-3.42 All with 8-7/8" Ring Gear 3.73-Up Without "C" Clips Without "C" Clips

3.55-Up 3.73-Up

27 27

1967-01 1967-01

Dana 35 Models Dana 35 Models Dana 35 Models Dana 35 Models

3.31-Down 3.55-Up 3.31-Down 3.55-Up

27 27 30 30

1987-Up 1987-Up 1987-Up 1987-Up

Aurora Bearing Company manufactures two- and three-piece spherical rod ends. Both use a solid, one-piece race. The two-piece version consists of a body and precision ground, oil impregnated, sintered steel ball which allows the rod end body to carry a greater static load. The ball is self lubricating under normal conditions. The three-piece rod end consists of a body, ball and race and features a fully swaged bearing for maximum spherical conformity between the ball and race.

Jam Nuts

Rod End Part Numbers Thread Size

Hole Size

CM, CB, CW, CG

VCM, VCB, VCW, VCG

MM, MB, MW, MG

10-32 RH Male 10-32 LH Male 10-32 RH Female 1/4" RH Male 1/4" LH Male 1/4" RH Female 1/4" LH Female 5/16" RH Male 5/16" LH Male 5/16" RH Female 5/16" LH Female 3/8" RH Male 3/8" LH Male 3/8" RH Female 3/8" LH Female 7/16" RH Male 7/16" LH Male 7/16" RH Female 7/16" LH Female 1/2" RH Male 1/2" LH Male 1/2 RH Female 1/2" LH Female 5/8" RH Male 5/8" RH Male 5/8" LH Male 5/8" LH Male 5/8" RH Female 5/8" LH Female 3/4" RH Male 3/4" RH Male 3/4" LH Male 3/4" LH Male 3/4" RH Female 3/4" LH Female

3/16" 3/16" 3/16" 1/4" 1/4" 1/4" 1/4" 5/16" 5/16" 5/16" 5/16" 3/8" 3/8" 3/8" 3/8" 7/16" 7/16" 7/16" 7/16" 1/2" 1/2" 1/2" 1/2" 5/8" 1/2" 5/8" 1/2" 5/8" 5/8" 3/4" 5/8" 3/4" 5/8" 3/4" 3/4"

AURCM-3 AURCB-3 AURCW-3 AURCM-4 AURCB-4 AURCW-4 AURCG-4 AURCM-5 AURCB-5 AURCW-5 – AURCM-6 AURCB-6 AURCW-6 AURCG-6 AURCM-7 AURCB-7 AURCW-7 – AURCM-8 AURCB-8 AURCW-8 AURCG-8 AURCM-10 – AURCB-10 – AURCW-10 AURCG-10 AURCM-12 – AURCB-12 – AURCW-12 AURCG-12

– – – – – –

– – – AURMM-4Y AURMB-4 – – AURMM-5Y AURMB-5 AURMW-5 – AURMM-6Y AURMB-6Y – – AURMM-7Y AURMB-7Y AURMW-7 – AURMM-8Y AURMB-8Y AURMW-8 – AURMM-10Y – AURMB-10Y – – – AURMM-12Y – AURMB-12Y – AURMW-12 –

90

AURVCM-5 AURVCB-5 AURVCW-5 AURVCG-5 AURVCM-6 AURVCB-6 AURVCW-6 – – – – – AURVCM-8 AURVCB-8 AURVCW-8 AURVCG-8 AURVCM-10 – AURVCB-10 – AURVCW-10 AURVCG-10 AURVCM-12 – AURVCB-12 – AURVCW-12 –

AM, AB AW, AG

XM, XB

XAM, XAB

– – – – – – – – – AURAM-4 – – AURAB-4 – – – – – – – – AURAM-5 – – AURAB-5 – – AURAW-5 – – – – – AURAM-6 – – AURAB-6 – – AURAW-6 – – – – – AURAM-7 – – AURAB-7 – – AURAW-7 – – – – – AURAM-8 – – AURAB-8 – – AURAW-8 – – – – – AURAM-10 – – – AURXM-8 AURXAM-8 AURAB-10 – – – AURXB-8 AURXAB-8 AURAW-10 – – – – – AURAM-12 – – – AURXM-10 AURXAM-10 AURAB-12 – – – AURXB-10 AURXAB-10 AURAW-12 – – – – –

ALB, ALM

– – – – – – – – – – – – – – – – – – – – – – – AURALM-10 – AURALB-10 – – – AURALM-12 – AURALB-12 – – –

Size

Steel Part No.

Aluminum Part No.

1/4" RH 1/4" LH 5/16" RH 5/16" LH 3/8" RH 3/8" LH 7/16" RH 7/16" LH 1/2" RH 1/2" LH 5/8" RH 5/8" LH 3/4" RH 3/4" LH

ALL18250 ALL18251 ALL18252 ALL18253 ALL18254 ALL18255 ALL18256 ALL18257 ALL18258 ALL18259 ALL18260 ALL18261 ALL18262 ALL18263

– – – – – – – – ALL18278 ALL18279 ALL18280 ALL18281 ALL18282 ALL18283

Jam Nut Assortment ALL18290 35 Asst. RH Jam Nuts ALL18291 35 Asst. LH Jam Nuts

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


performance

Aurora Bearing Company manufactures two- and three-piece spherical rod ends. Both use a solid, onepiece race. The two-piece version consists of a body and precision ground, oil impregnated, sintered steel ball which allows the rod end body to carry a greater static load. The ball is self lubricating under normal conditions. The three-piece rod end consists of a body, ball and race and features a fully swaged bearing for maximum spherical conformity between the ball and race.

Rod End Specifications Description

Body

Low carbon steel, protective coated for corrosion resistance Low carbon steel, protective coated for corrosion resistance, PTFE lined. Low carbon steel, protective coated for MM, MB, MW and MG Series, 3 Pc. General corrosion resistance, No. 16 series standard Purpose-Precision body is 4130 steel, non heat treated AM and AB Series, 3 Pc. 4130 steel alloy, heat treated and High Strength Alloy-Precision protective coated for corrosion resistance XM and XB Series, 3 Pc. Low carbon steel, protective coated Extra Strength-Heavy Duty Shank for corrosion resistance. XAM and XAB Series, 3 Pc. Steel alloy heat treated and protective High Strength Alloy-Heavy Duty Shank coated for corrosion resistance. *Popular use as tie rod ends

Race

CM, CB, CW and CG Series, 2 Pc. General Purpose-Economy VCM, VCB, VCW and VCG Series, 2 Pc. General Purpose-Economy*

Ball

Sintered steel, heat treated, oil impregnated Sintered steel, heat treated, oil impregnated

– – Low carbon steel, protective coated for corrosion resistance

Alloy steel, heat treated and hard chrome plated

Steel alloy heat treated and coated for corrosion resistance Steel alloy heat treated and coated for corrosion resistance Steel alloy heat treated and coated for corrosion resistance.

Alloy steel, heat treated and hard chrome plated Alloy steel, heat treated and hard chrome plated Alloy steel, heat treated and hard chrome plated

Steering Shaft Rod End AURCM-12OS Specially built Aurora 3/4" rod end has a slightly oversize 3/4" hole to fit 3/4" O.D. steering shaft tubing.

Mono Ball Bearing AURCOM-12 Race is carbon steel with protective coating. Ball is hardened steel, heat treated and hard chrome plated. ID is .750", OD is 1.4375"

Rod Ends with Studs

Commercial Economy Series Rod Ends

Perfect for throttle linkage and other applications.

Economically-priced rod ends with low carbon steel bodies are protective coated for corrosion resistance. Steel ball is heat-treated and oilimpregnated.

Size

Male

Female

1/4" RH 5/16" RH 3/8" RH 1/4" LH 5/16" LH 3/8" LH

AURCM-4S AURCM-5S AURCM-6S AURCB-4S AURCB-5S AURCB-6S

AURCW-4S AURCW-5S AURCW-6S AURCG-4S AURCG-5S AURCG-6S

Part No.

Thread Size

Hole Size

AURCEM-8 AURCEB-8 AURCEM-10 AURCEB-10 AURCEM-12 AURCEB-12

1/2" RH Male 1/2" LH Male 5/8" RH Male 5/8" LH Male 3/4" RH Male 3/4" LH Male

1/2" 1/2" 5/8" 5/8" 3/4" 3/4"

Jam Nuts Size

Steel Part No.

Aluminum Part No.

1/4" RH 1/4" LH 5/16" RH 5/16" LH 3/8" RH 3/8" LH 7/16" RH 7/16" LH 1/2" RH 1/2" LH 5/8" RH 5/8" LH 3/4" RH 3/4" LH

ALL18250 ALL18251 ALL18252 ALL18253 ALL18254 ALL18255 ALL18256 ALL18257 ALL18258 ALL18259 ALL18260 ALL18261 ALL18262 ALL18263

– – – – – – – – ALL18278 ALL18279 ALL18280 ALL18281 ALL18282 ALL18283

High Misalignment Rod Ends AURHXAM-6T 3/8" x 7/16"-20 RH.

Jam Nut Assortment ALL18290 35 Asst. RH Jam Nuts

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

91


performance

Autometer has lots of styles to choose from no matter what your needs

User Selectable Seven Color Led Through The Dial

Perimeter Incandescent Perimeter Incandescent

Green LED Full Dial

Perimeter Incandescent Blue LED Full Dial Perimeter Incandescent Blue LED Through The Dial Perimeter Incandescent

White LED Through The Dial Perimeter Incandescent

White LED Through The Dial

White LED Through The Dial

Perimeter Incandescent

Glow in the Dark

Perimeter Incandescent

92

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


5” Monster Tachometer Perfect bolt-on for monitoring high-powered street or off-road engines. The classic steel case tachometer includes a fast action air core meter movement that measures engines to 10,000 RPM. A redline shift marker can be ATM3900 ATM3980 adjusted to time shifts with the horsepower curve and to prevent damage from over-revving.

ATM233902 Pedestal mount 10,000 RPM tachometer is easy to read and includes Memory/Peak Recall to record and display highest RPM reached during a race. Economical Tach has a black 5" dia. dial face, silver bezel and bright red pointer. Compatible with most standard/electronic ignitions.

Description

Part No.

10,000 RPM Monster Tachometer.................................... ATM3900 8,000 RPM Monster Tachometer ...................................... ATM3980

Sport-Comp 5" Memory Tachometer ATM3906

5” Tachometers

Pedestal mount, 10,000 RPM tach includes Peak RPM/Memory feature for recording and viewing the highest RPM attained during the last race. Tach has a silver bezel, black dial face and bright red pointer. Compatible with most standard/electronic ignitions.

Traditional Auto Meter gauges feature race quality mechanisms and familiar black dial faces with fluorescent red pointers and chrome bezels for a nostalgic touch. ATM3903, ATM3904, ATM3905, ATM3906 feature dial-in-exactness which utilizes the tach’s pointer to indicate a chosen RPM. ATM3906 has peak memory recall to recall highest RPM reached.

Sport-Comp Silver 5" Tachometer ATM3910 Sport-Comp Silver 10,000 RPM tach utilizes an attractive silver bezel and dial face, and bright red pointer for easy reading. Pedestal mount tach includes an adjustable shock strap for optimum positioning. Compatible with most standard/electronic ignitions.

Description

In-Dash Tachometers Sport-Comp 5" Tachometer ATM3990

Pro-Comp Memory tachometers’ rugged air core meter movements offering superior monitoring accuracy. Pedestal mount, large 5" dia. and 3-3/4" models are available for most electronic and magneto style racing ignitions. Each tach features Peak RPM Memory recall, which displays the highest RPM attained during the last race to help determine ideal gear ratio.

Large, 10,000 RPM in-dash tach includes a black dial face and bright red pointer for easy reading. Compatible with most standard/ electronic ignitions.

Pro-Comp Ultra-Lite 5" Tachometers

Description

ATM6601 ...............3-3/4", 10,000 RPM, Std./Elec. Ignitions ATM6809 ...............5", 9,000 RPM, Std./Elec. Ignitions ATM6811 ...............5", 11,000 RPM, Std./Elec. Ignitions ATM6821 ...............5", 11,000 RPM, Internal Coil Magnetos

Part No.

10,000 RPM Shift-Lite Tachometer .................................. ATM3903 10,000 RPM Shift-Lite Tachometer .................................. ATM3904 8,000 RPM Monster Tachometer ...................................... ATM3905

Pro-Comp 3-3/4" and 5" Memory Tachometers

Part No.

ATM3904

ATM6811

Satin finished aluminum in-dash Ultra-Lite, 10,000 RPM tachs have bright red pointers for quick, easy reading. Available Peak RPM Memory feature allows recalling the highest RPM attained during the last race. Part No.

Description

ATM4498 ...............Ultra-Lite 10,000 RPM Tachometer ATM4494 ...............Ultra-Lite 10,000 RPM Memory Tachometer

ATM4494

Ultra-Nite 5" Memory Tachometer ATM4594 Ultra-Nite, in-dash 10,000 RPM tachometer includes a luminescent dial, which requires no power connections for lighting. The Memory feature allows recording and viewing the highest RPM attained during the last race. Water resistant case makes post-race clean-up easy. Compatible with most standard/electronic ignitions.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

93

performance

Pedestal Mount Tachometers Auto Gage 5" Memory Tachometer


performance

In-Dash Tachometers - Cont. Carbon Fiber 5" Tachometers

2-1/16" Gauges Traditional Chrome

Part No.

Competition look and affordable price make these gauges popular with racers.

ATM4894 ...............Carbon Fiber 10,000 RPM Memory Tachometer ATM4898 ...............Carbon Fiber 10,000 RPM Tachometer

Sport-Comp

Pro-Comp 5" Tachometers

ATM6801

Description

5” Tach & Speedometer For In-Dash Mounting Traditional mechanical speedometers are available in 120 or 160 mile per hour versions complement the 10,000 RPM tach. For in-dash installation only.

Description

Traditional Chrome

Z-Series

Sport-Comp

Ultra-Lite

Fuel Pressure, 0-15 PSI/Mech. Oil Pressure, 0-100 PSI/Mech. Oil Pressure, 0-200 PSI/Mech. Oil Pressure, 0-150 PSI/Mech. Water Temp., 140-280°F., 6' Tubing Water Temp., 120-240°F., 6' Tubing Water Temp., 120-240°F., 12' Tubing Water Temp., 100-250° F./Elec. Oil Temp., 140-280°F., 6' Tubing Oil Temp., 140-340°F., 2' Tubing Fuel Pressure, 0-15 PSI/Elec. Voltmeter, 8-18 Volts

ATM2411 ATM2421 ATM2422 – ATM2431 ATM2432 ATM2433 ATM2532 ATM2441 – – ATM2592

ATM2603 ATM2604 ATM2605 – ATM2606 ATM2607 – ATM2635 ATM2609 – ATM2661 ATM2645

ATM3311 ATM3321 ATM3322 ATM3323 ATM3331 ATM3332 ATM3333 ATM3337 ATM3341 – ATM3361 ATM3391

ATM4311 ATM4321 ATM4322 ATM4323 ATM4331 ATM4332 ATM4333 ATM4337 ATM4341 ATM4346 ATM4361 ATM4391

ATM3994

Pro-Lite gives an unmistakable warning in the midst of racing action, when there is no time to monitor gauges. Works great with gauges to give first alert to possible problems. 12 volt power and sender required. Part No.

Memory Switch ATM5225 Replacement rotary memory switch for Pro-Comp tachs with remote memory recall. Switch only, mounting plate not included.

ATM4311

Pro-Lite Warning Lights

Part No.

120 MPH In-Dash Mechanical Speedometer *............ ATM3994 160 MPH In-Dash Mechanical Speedometer *............ ATM3995 *Includes trip odometer

ATM3321

Lightweight, quality gauges have satin aluminum dial faces and bright red pointers.

ATM5160 ...............Pro-Comp 10,000 RPM Tachometer ATM6801 ...............Pro-Comp 10,000 RPM Memory Tachometer

Description

Competition gauges have easy-toread black dial faces and bright red pointers.

Ultra-Lite

Dependable, accurate in-dash tachometers feature silver bezels, black dial faces and bright red pointers for quick, easy reading. Memory tach allows recording and viewing the highest RPM attained during the last race. Compatible with most standard/electronic ignitions. Part No.

ATM2623

Z-Series ATM4894

Description

ATM2592

Economical gauges with black dial faces, bright red pointers and bright chrome bezels for a high performance look.

In-dash tachometers have real carbon fiber dial faces, super bezels and bright aluminum pointers. Memory tachometer (ATM4894) records and displays the highest RPM attained during race. Compatible with most standard/electronic ignitions.

Description

ATM3240 ...............Pro-Lite w/Red Lens and Red Night Cover, Requires Sender ATM3241 ...............18 PSI Sender ATM3242 ...............30 PSI Sender ATM3243 ...............50 PSI Sender ATM3246 ...............170-200° Sender ATM3247 ...............190-220° Sender ATM3250 ...............Blue Lens Kit w/Lens and Night Cover ATM3251 ...............Yellow Lens Kit w/Lens and Night Cover ATM3252 ...............Red Lens Kit w/Lens and Night Cover

Mini Pro-Lite Warning Lights Lightweight aluminum miniature warning lights operate the same as the ProLite. Bright red bulb gives instant warning of a problem. 12 volt power and sender required. Select from senders listed under Pro-Lite Warning Lights. Part No.

Description

ATM3238 ...............Mini Pro-Lite Warning Light, Ultra Lite Silver ATM3239 ...............Mini Pro-Lite Warning Light, Black

94

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Sport-Comp Widely used gauges have black dial faces, bright red pointers and silver bezels.

Mount tachometers or gauges directly to roll cage tubing with Roll Pods. ATM3421

Ultra-Lite

ATM4421

Aluminum construction with satin aluminum dial face and bright fluorescent red pointer.

Ultra-Nite Gauges have blue anodized bezels and glow-in-the-dark luminescent dial (no bulbs). Water resistant case makes clean-up easy.

Part No.

Gauge Panels

Top-of-the-line liquid-filled gauges for steady, easy gauge reading.

Black, aluminum panels.

ATM5421

Part No.

Description

SportComp

Ultra-Lite

Ultra-Nite

Pro-Comp

Fuel Pressure, 0-15 PSI/Mech.

ATM3411

ATM4411

ATM4511

ATM5411

Fuel Pressure, 0-100 PSI/Mech.

ATM3412

ATM4412

ATM5412

Fuel Pressure, With Isolator, 0-15 PSI/Mech. ATM3413

ATM4413

ATM5413

Oil Pressure, 0-100 PSI/Mech.

ATM3421

ATM4421

ATM4521

ATM5421

Oil Pressure, 0-200 PSI/Mech.

ATM3422

ATM4422

ATM5422

Oil Pressure, 0-150 PSI/Mech.

ATM3423

ATM4423

ATM4523

ATM5423

Water Temperature, 140-280°F., 6' Tubing

ATM3431

ATM4431

ATM4531

ATM5431

Water Temperature, 120-240°F., 6' Tubing

ATM3432

ATM4432

ATM4532

ATM5432

Water Temp., 120-240°F., 12' Tubing

ATM3433

ATM4433

ATM5433

Temperature, 140-340°F., 6' Tubing

ATM3435

ATM4435

ATM4535

ATM5435

Oil Temperature 140-280°F., 6' Tubing

ATM3441

ATM4441

ATM4541

ATM5441

Oil Temp., 140-280°F., 12' Tubing

ATM3443

ATM5443

Trans. Temperature 140°-280°F, 8' Tubing

ATM3451

ATM4451

ATM5451

Fuel Level, 0 to 90 Ohms, GM '65-Up/Elec.

ATM3514

ATM4414

ATM5415

Fuel Level, E to 10 Ohms, Ford Before 1987/Elec.

ATM3515

ATM4415

ATM5416

Fuel Level, 16 E to 158 Ohms, Ford '87-Up/Elec.

ATM3518

ATM4418

Oil Pressure 0-100PSI/Elec.

ATM3522

ATM4427

ATM5427

Water Temperature 100°-250°F/Elec.

ATM3531

ATM4437

ATM4837

Oil Temperature 0°-100°F/Elec.

ATM3542

Oil Temperature 140°-300°F/Elec.

ATM3543

ATM4447

ATM5447

Trans. Temperature 100°-250°F

ATM3552

ATM4457

ATM5457

Fuel Pressure, 0-15 PSI/Elec. ATM3561

ATM4461

ATM5461

ATM4491

ATM5492

Description

For All 2-1/16" Gauges ATM2236 ...............1-Hole ATM2237 ...............2-Hole ATM2238 ...............3-Hole For All 2-5/8" Gauges ATM3231 ...............1-Hole ATM3232 ...............2-Hole ATM3233 ...............3-Hole

Replacement Bulbs And Sockets Part No.

Description

ATM3211 ...............For All Steel Case 2-5/8" Gauges and Tachs ATM3219 ...............Twist-In For Some Pro-Comp and SportComp Gauges

Braided Stainless Steel and Copper Gauge Tubing Tubing for all gauge series. Part No.

Description

ATM3224 ...............6' Copper, 1/8" Dia., Mech. Pres. Ga. ATM3227 ...............3' Braided Stainless -4AN, 3/16 I.D. Mech. Pres. Ga. ATM3228 ...............6' Braided Stainless -4AN, 3/16 I.D. Mech. Pres. Ga. ATM3229 ...............4' Braided Stainless -4AN, 3/16 I.D. Mech. Pres. Ga.

Temperature Adapter Fittings Hard-to-find fittings for use with Auto Meter mechanical oil, water and transmission temperature gauges. Extension Adapters are also available where extra water passage clearance is needed. Part No.

ATM3592

Description

ATM48001 ............2-5/8" Roll Pod, Mounts 2-5/8" Dia. Gauge To 1-1/2" Dia. Tubing ATM48003 ............2-1/16" Roll Pod, Mounts 2-1/16" Dia. Gauge To 1-5/8" Dia. Tubing ATM48004 ............2-5/8" Roll Pod, Mounts 2-5/8" Dia. Gauge To 1-5/8" Dia. Tubing ATM48002 ............Tachometer Roll Pod, Mounts Tach To 1-1/2" Dia. Tubing ATM48005 ............Tachometer Roll Pod, Mounts Tach To 1-5/8" Dia. Tubing ATM48008 ............Tachometer Roll Pod, Mounts Tach To 1-3/4" Dia. Tubing

ATM4521

Pro-Comp

Voltmeter, 8-18 Volts

performance

Mounting Solutions Roll Pods

2-5/8" Gauges

Description

ATM2263 ...............3/8" Brass NPT Adapter ATM2264 ...............1/2" Brass NPT Adapter ATM2270 ...............1/2" NPT Temperature Extension ATM2271 ...............3/8" NPT Temperature Extension

ATM2263

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

ATM2270

95


performance

Gauge Pods and Pillars There is a definite need for more detailed systems information on most new trucks, but there is very little space available to mount auxiliary gauges. Auto Meter Gauge Pods and Gauge Pillars solve the problem of where to mount the gauges and still keep them within view. Pillars replace stock pillar for a factory installed look. Gauges not included. Year/Model

Dual Pods 2-1/16”

Single Pods 2-1/16”

Dual Pillar 2-1/16”

Triple Pillar 2-1/16”

ATM17106

ATM17107

Chevrolet/GM - Full Size 2000-05 Full Size Truck/Durmax With Speaker

2000-05

ATM15104

ATM15105

ATM17104

ATM17105

2000-05 Duramax

ATM15104

ATM15105

ATM17104

ATM17105

1994-02 S10 Pickup

ATM15110

ATM15111

ATM17110 1994-98

1995-02 Blazer

ATM15110

ATM15111

ATM17110 1994-98

Dual Gauge Pod

Year/Model

Dual/Single Gauge Pod

Dual Pods 2-1/16”

Single Pods 2-1/16”

Dual Pillar 2-1/16”

Triple Pillar 2-1/16”

1997-01 F150 And Expedition

ATM15303

ATM15304

ATM17304

ATM17305

2002-03 F 150

ATM17310

ATM17311

Ford

Dodge

2004-05 F150

ATM15312

1999-02 Ford Super Duty

ATM15306

ATM15307

ATM17306

ATM17307

2003-07 Ford Super Duty

ATM15318

ATM17306

STM17307

ATM17203

ATM15309

ATM17213

1993-02 Ford Ranger

ATM15308

ATM17212

ATM15212

ATM17212

ATM17213

ATM15207

1998-02 Ram With Speaker (Except 2002 1500)

ATM17204

ATM17205

1998-02 Ram Except 2002 1500

ATM15203

ATM15204

ATM17202

2002 Ram1500

ATM15212

2003-05 Ram

1997-02 Dakota/Durango

ATM15206

Gauges are not included with Gaugeworks products.

Gauges are not included with Gaugeworks products.

Diesel Truck Gauge Kits Year/Model

Single A-Pillar

Dual A- Pillar

Triple A-Pillar Single A-Pillar

Ultra-Lite (Silver) 2000-06 Chevy Duramax/Silverado Kits

ATM7084

1998-02 Dodge Ram Kits

ATM7093

ATM7094

ATM7095

1999-02 Ford Powerstroke/SD

ATM7073

ATM7074

ATM7075

2003-06 Ford Powerstroke/SD

ATM7074

ATM7075

2000-06 Chevy Duramax/Silverado Kits

ATM7080

ATM7081

1998-02 Dodge Ram Kits

ATM7090

ATM7091

ATM7092

2003-06 Ford Powerstroke/SD

ATM7070

ATM7071

ATM7072

ATM7097

ATM7098

Z-Series (Black)

Phantom (White) 2003-05 Dodge Ram Kits Taupe

Notes • Single Pillar includes transmission temperature gauge. • Dual Pillar includes boost and pyrometer gauge. • Triple Pillar includes boost, pyrometer and transmission temperature gauge. • Dual and Triple Pillars for Dodge Ram included hole for speaker.

96

Dual A-Pillar

A-Pillar Triple

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


performance

Steering Column Pods Mounts gauges on top of the steering column. Gauges not included. Year

Description

Part No.

1994-02

(All), Single 2-1/16"

ATM15012*

2003-05

(All), Single 2-1/16"

ATM15013

2003-05

(All), Dual 2-1/16"

ATM15014

F250/F350 Auto. Trans., Single 2-1/16"

ATM15010

Dodge

Ford 1999-04

1997-01 F-150 Auto. Trans., Single 2-1/16" *Except 2002 1500, use ATM15013

ATM15004

Overhead Console Pods for 2-1/6" Gauges Year/Model

Dual Pods

Triple Pods

Quad Pads

2000-05 Chevy/GM Full Size

ATM18022

ATM18023

–

2003-05 Dodge Ram

ATM18016

ATM18017

ATM18018

1999-04 Ford Super Duty

ATM18016

ATM18017

ATM18018

Edge Attitude Pods And Pillar Mounts Full Pillars replace A-Pillar for a factory, installed look. Mount gauges for maximum visibility. Year/Model

Dash Pods for 2-1/6" Gauges

Edge Attitude Pods

Gauges not included. Year

Description

Part No.

Part No.

Dodge Ram 1998-02 Except 2002 1500

Triple Pod

ATM15002

2003-05

Triple Pod

ATM15020

1999-02 Ford Super Duty

ATM13000

2003-06 Ford Super Duty

ATM13001

2003-05 Dodge Ram

ATM13005

Edge Attitude Full Pillars 1999-05 Chevy/GM

ATM13003

1999-05 Chevy/GM With Speaker

ATM13004

Triple Console Bezel for 2-1/6" Gauges Gauges not included. Year

Description

Part No.

Triple Pod

ATM15021

Dodge Ram 2003-05

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

97


performance

Unimatic Automatic Shifter The B&M Unimatic Shifter is an ideal replacement for a stock column shifter. The Unimatic is cable activated for quick installation and accurate shifting. Includes neutral safety switch and black T-handle. Back-up light switch not available for this shifter. Part No.

Description

BMM80775 ................................. GM TH400, 350, 250, 200, 700-4R and 200-4R BMM80775 ................................. FORD C4, C6 and AOD* BMM80775 ................................. CHRYSLER 66 and later Torqueflite 727** or 904 BMM80775 ................................ ‘62-73 Aluminum Powerglide*** Note * Requires #40496 AOD Installation Kit ** Requires Cable #80740 *** Requires Powerglide Installation Kit #70497 Tech Notes Secure the cable as far away from the exhaust as possible using tie wraps and fabricate a heat shield out of thin sheet metal and attach it to the exhaust pipe with muffler clamps.

Diesel Torque Converter Ideal for stock to modified diesel engines in light trucks! These converters provide the performance you need for your diesel powered light truck. Includes the latest in converter technology and is suitable for highly modified diesel powered applications. If you are towing a trailer with a combined vehicle and trailer weight of 20,000 lbs or more, this converter is perfect for your vehicle! Part No.

Tork Master™ Torque Converters The best "value priced" street performance converters available. New precision pump drive tube pressure tested & fully balanced. Tork Master converters are not recommended for big blocks or supercharged engines. Tork Master™ 2000 - 1900 to 2100 RPM Tork Master™ 2400 - 2300 to 2500 RPM Year

Light Truck Megashifter Universal floor mount base can be trimmed to fit any floor. Shifter is cable operated for quick installation and accurate shifting. It’s impossible to miss a gear. Reverse lockout feature includes neutral safety switch, backup light switch, lighted gear indicator and polished aluminum T-Handle and cable. Part No.

Description

BMM80680 ...........GM TH400, 350, 250, 200, 700-R4, 200-4R BMM80680 ...........Ford C4, C6 and AOD (AOD req. 40496 inst. kit.)

T-Handles B&M T-Handles are available in four finishes; chrome, satin, black and carbon fiber. They fit all B&M Shifters, as well as most aftermarket and OEM shifters with SAE threads. Button T-Handles can be used to activate launch controls, trans brakes and nitrous systems. All T-Handles are packaged with thread adapter inserts to fit 1/2”-20, 3/8”-24, 3/8”-16 and 5/16”-18 threads. Part No.

Description

BMM20503 ...........Chevrolet/GMC, 2003 & Later, Allison 1000 Transmission With Duramax BMM10504 ...........Dodge Converter, 1994-04, A618 With 23 Spline BMM40503 ...........Ford Converter, 1990-03 E40D/4R100 With 7.3L Diesel With 6-Lug

Model

Tork Master 2000 5

Tork Master 2400

1965-91

GM TH400, TH425, TH3754

BMM20400

BMM20404

1968-81

GM TH350, TH375B6, Will Not Fit TH-350C

BMM204005

BMM20404

1984-93

GM TH-700R4, 30 Spline, All Trucks

BMM704207

BMM704187

1993-96

GM 4L60E, 30 Spline, V8s Only

BMM7042011

BMM7041811

Footnotes: 4 - GM vehicles with variable-pitch trans (some ’65-’67 Olds, Buick & Cadillac) must have pump and input shaft changed to fixedpitch design to use B&M converter. 5 - Requires small (10-3/4”) bolt circle flexplate or dual pattern flexplate 6 - Will not fit lock-up converter or clutch converter models. 7 - V8’s only, retains lockup feature. Can be run as lockup or nonlockup. This converter won’t fit V6 or 4 cyl. (exc. 4.3L V6). 11 - Retains lockup feature.

Description

BMM80643 ...........Universal T-Handle, Chrome Aluminum BMM80659 ...........Universal T-Handle, Chrome Aluminum w/Button BMM80641 ..........Universal T-Handle, Brushed Aluminum BMM80658 ...........Universal T-Handle, Brushed Aluminum w/Button

98

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Light Truck Shift Improver Kit

Kit offers 2 levels of performance. One for RV/towing, 4x4 and heavy duty use, the second level for performance sport truck enthusiasts who want the firmest possible shift for their automatic transmission. Includes easy to follow step-bystep instructions. A filter is included with most kits.

A Shift Improver Kit for light truck/ towing and RV’s. These new kits offer a nice firm shift and eliminate between shift overlap and flair, but are not harsh. Kits improve the life of almost any automatic transmission by reducing clutch slippage! Kit includes the necessary components to improve the shifting performance of automatic transmission. Easy to follow step-by-step instructions are provided.

The difference between a Transpak™and a Shift Improver Kit is that a Shift Improver Kit improves up shift only. A Transpak gives more manual control, up and downshifting and includes a low micron filter on most applications. Year

Description

Part No.

Year

Description

Part No.

TH-400, 375, and M40

BMM20260

1988-94

TH-400 (3L80)

BMM20261

1968-81

TH-350, 375B, and M38 (For TH-350C, use Transpak BMM30235)

BMM30262

performance

Light Truck Transpak™

Chevrolet/GMC

Chevrolet/GMC

1965-87

1982-93

TH-700R4 (4L60)

BMM70235

1965-87

TH-400, 375 and M40

BMM20228

1968-81

TH-350, 375B and M38

BMM30228

1980-86

TH-350-C

BMM30235

1982-93

TH-700R4/4L60

BMM70239

1962-73

Powerglide

BMM70228

1993-01

4L60E

BMM70360

1993-01

4L60E

BMM70365

Ford 1967-91

C6

BMM40262

1980-92

AOD (Except 1992 & Later With Electric Shift)

BMM40227

1980-92

AOD

BMM40263

1970-82

C4

BMM50262

1967-91

C6

BMM40228

1992-95

AODE/4R70W

BMM40264

1970-82

C4

BMM50229

1996-99

4R70W

BMM40266

1989-97

E4OD

BMM10025

Ford

Chrysler, Dodge, Plymouth 1966-77

TF A-727 & A-904

BMM10228

1978-96

TF 727, 518, 46RH & 47RH

BMM10227

1978-96

TF 904, 999, 32RH, 42RH & 500

BMM10227

Chrysler, Dodge and Plymouth 1971-77

TF A-727

BMM10225

1978-79

TF A-727 With Non-Lock-Up Converter

BMM10232

Shiftplus™ Electronic Shift Improver

1968-70

TF A-904 With V8 Engine

BMM10226

The B&M Shift Improver Kit is the most reasonably priced transmission performance kit on the market. Easy to install, the B&M Shift Improver Kit eliminates soft sluggish shifts and shift overlap. Extend transmission life by preventing excess wear on clutches and bands caused by slippage. The B&M Electronic Shift Improver Kit offers two stages: RV/Heavy Duty and Street/Strip, either of which can be turned on or off with the flip of a switch. In the off position, transmission shifts in stock manner. B&M’s ShiftplusTM can be installed in minutes!

1971-77

TF A-904 With V8 Engine

BMM10225

1978-79

TF A-904 With V8 Engine & Non-Lock-Up Converter

BMM10232

Stage 1. Ideal for street performance, RV and towing use, or for anyone who simply wants a better shifting transmission. Stage 2 For those who want serious performance in a very firm shifting transmission. Also ideal for towing very heavy loads where transmission slippage could create excessive heat and wear. Year

Description

Part No.

1993-98

GM RWD/4WD w/4L60E & 4L80E Transmissions

BMM70380

1994-97

F-Series w/E40D Transmissions

BMM70381

SuperCooler™ Transmission Coolers The SuperCooler’s rigid stackedplate design resists damage from rocks and other debris, making it the most efficient cooler for its size and weight. Pressure tested to 200 PSI, the cooler includes an installation kit. Size

BTU Rating

Part No.

11” x 5-3/4” x 3/4”

9,800

BMM70255

11” x 7-1/4” x 3/4”

13,000

BMM70268

11” x 5-3/4” x 1-1/2”

14,400

BMM70264

11” x 8” x 1-1/2”

20,500

BMM70266

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

99


performance

Baer Brake Systems are committed to the design and manufacture of brake systems and components that deliver the highest levels of technology, quality, and performance.

AlumaSport™

DecelaRotors

With the advent of 18” and 20” wheel options for modern pickup trucks, it soon became apparent that, even with the lightest wheels, there was a significant increase in wheel/tire weight - often as much as a 30 lbs.- and a decrease in braking ability. Baer Inc., in a cooperative engineering effort with PBR, Ltd. of Australia, developed the Alumasport Brake System to offset the mass rotational inertia of larger wheels and tires to increase the braking capability of trucks fitted with larger wheel and tire combos. The goal was to design an affordable system that was easy to install, generated at least a 20% improvement in brake performance and delivered a dramatic visual impact. The system includes: four AlumaSport 2-piston calipers, OE proven performance pads and four 355mm (14”) diameter EradiSpeed directional rotors.

Direct replacement DecelaRotors provide superior braking and dynamic visual impact, using the same counter-rotational drilling and slotting as competition racing units. They provide superior bite and equalized pad wear. Backed by a 50,000 mile limited warranty against warpage and cracking. Sold in axle set pairs.

Year/Model

Description

Part No.

1999-07 GM Trucks, 1/2 Ton

Front System

BAE4301038

2001-07 GM SUV, 1/2 Ton

Rear System

BAE4302035

Call for applications. EradiSpeed+1 EradiSpeed+1 indicates a set of rotors a size larger that still work with the OEM calipers. The result is increased performance by virtue of the augmented leverage of the larger rotor. Baer provides all the hardware necessary to move OEM calipers outward. EradiSpeed+1 rotors may work with OEM wheels but usually require larger wheels, see application notes. Note: All BAER EradiSpeed™ rotors are cross-drilled, slotted, and zinc washed. They exhibit faster thermal recovery, increased heat absorption, increased friction and low wear characteristics. Because of the quality craftsmanship, Baer backs all EradiSpeed™ rotors with a limited lifetime warranty against warping, an industry first.

BAER Claw Brake Systems BAER Claw Systems feature the finest calipers in the world from PBR and Alcon. Proper dust and weather seals make them appropriate for use on streets and highways. BAER Systems include everything needed: the finest calipers, rotor, hoses, mounting hardware, and other components.

Call for applications.

BAER BRAKE SYSTEMS APPLICATION GUIDE

Chevrolet/GMC Year

Description

EradiSpeed (Front Application)

EradiSpeed (Rear Application)

BAER Brake Systems (Rear Application)

1988-98

1/2 Ton Pickup 2WD

BAE4302011[Touring]AMQ

1999-07

1/2 Ton Pickup 2WD

BAE2301028 [ES+1]D

See Aluma Sport

1988-98

1/2 Ton Pickup 4WD

BAE4302015[Touring]AMQ

1999-07

1/2 Ton Pickup 4WD

BAE2301028[ES+1]D D

2000-01

Suburban/Yukon 2WD

BAE2301028[ES+1]

2002-07

Suburban/Yukon 2WD

BAE2301028[ES+1]D

2000-07

Suburban/Yukon 4WD

D

2000-01

Tahoe/Yukon 2WD/2Door

2002-07

Tahoe/Yukon 2WD/2Door

D

2000-01

Tahoe/Yukon 2WD/4Door

2002-07

Tahoe/Yukon 2WD/4Door

D

2000-07

Tahoe/Yukon 4WD/2Door Tahoe/Yukon 4WD/4Door

D

2000-07

100

– BAE2302024[ES+1]

See Aluma Sport dD

See Aluma Sport See Aluma Sport

BAE2301028[ES+1]

BAE2302024[ES+1]

dD

See Aluma Sport

BAE2301028[ES+1]D

BAE2302024[ES+1] dD

See Aluma Sport

BAE2301028[ES+1]

See Aluma Sport

BAE2301028[ES+1]D

BAE2302024(ES+1] dD

See Aluma Sport

BAE2301028[ES+1]

See Aluma Sport

BAE2301028[ES+1]D

BAE2302024[ES+1] dD

See Aluma Sport

dD

See Aluma Sport

BAE2301028[ES+1]

BAE2302024[ES+1]

Note The BAER Touring Brake System contains a 12” rotor with a single piston caliper. Footnote A-Fits 15” wheel - verify with template. B-Requires 16” wheel or larger - verify with template. d-PBR rear caliper (BLACK caliper bracket) D-Requires 18” wheel or larger - verify with template. M-Rear caliper anti-groan dampener kit available. Q-Park brake mechanism not suitable. for towing or heavily loaded use.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Turbocharger Kits

Cool-It Intercoolers

A bigger turbocharger not only increases power, but also lowers EGT, reduces exhaust emissions and improves fuel economy. BD turbos are specifically designed for diesel applications for optimum performance.

With 57% more cooling surface area and a 33% thicker core, the Cool-It increases cooling effectiveness to approximately 90%, compared to only 70% for the stock intercooler. The 36% larger inlet and discharge tubes can handle up to 100 psi of boost and over 1500 cfm, while holding pressure drop to less than 1 psi. A direct, boltin replacement for the stock unit, the Cool-It is the best-looking, best performing intercooler on the market.

Part No.

Description

Vehicle

1994–02 250–425 HP 2003–04 250–425 HP 2004.5–07 5.9L 250–425 HP 2003–04 6.0L 325–500 HP 2005-07 6.0L 325–500 HP 2001–04 LB7 275–550 HP 2004–07 LLY/LBZ 275–550 HP

Dodge Dodge Dodge Ford Ford Chevy Chevy

Single Turbo Kits BDD1045220 BDD1045230 BDD1045235 BDD1047061 BDD1047067 BDD1046200 BDD1046210

Part No.

Description

Vehicle

BDD1042520 BDD1042525 BDD1042700 BDD1042710 BDD1042600

1994-02 5.9L 2003-07 5.9L 1999-03 7.3L 2003-07 6.0L 2001-04 6.6L LB7/LLY

Dodge Dodge Ford Ford Chevy

X-Flow Power Intake Elbows

Turbo Cool Down Timer

BD’s new X-Flow Power Intake Elbow features a larger plenum for increased airflow, and smooth radius turns to reduce turbulence and intake pressure losses. Two convenient ports make it easy to monitor boost and/or inject nitrous or other power adder.

Shutting your engine down after a heavy haul when the exhaust gas temperature (EGT) is above normal can result in turbo bearing damage. Protect your turbo with the BD Cool Down Timer that works with any K-Type EGT probe commonly found in most pyrometer gauge kits. Part No.

Description

Vehicle

BDD1081150 BDD1081151

Cool Down Timer Kit K-Type Exhaust Probe Kit

All All

Part No.

BDD1041550 BDD1041555 BDD1041570 BDD1041577

Turbo Boost Control

Polished

BD’s Heavy Duty waste gate kits replaces the weak factory unit and increases turbine speed while decreasing drive pressure and preventing waste gate “creep”. It bolts up to your factory turbo and is adjustable, so you can set the desired boost level and hold it.

BDD1041550-P BDD1041555-P BDD1041570-P BDD1041577-P

Part No.

Description

Vehicle

BDD1047150 BDD1047151 BDD1047154 BDD1047160 BDD1047170

1994–98 w/HX35 Turbo 1999–02 Auto w/HY35 Turbo 2003–07 5.9L 2001–04 LB7 Duramax 1999.5–03 7.3L PowerStroke

Dodge Dodge Dodge Chevy Ford

Description

Vehicle

1998–02 24-valve 2003–07 5.9L 2003–04 6.0L 2005-07 6.0L

Dodge Dodge Ford Ford

1998–02 24-valve 2003–07 5.9L 2003–04 6.0L 2005-07 6.0L

Dodge Dodge Ford Ford

Black Powder Coated

Electronic Boost Builders Installed in-line with the MAP sensor, the Electronic Boost Builder increases boost pressure and intercepts the message to the ECM, preventing it from setting an over boost trouble code that can cost between 50-80 hp.

Intake Hoses and Clamps Eye-catching blue Nomex silicone hoses can withstand over 100 psi of boost, and are secured by rugged, spring-loaded, stainless steel T-bar clamps. Engineered for each individual application, BD hose and clamp kits are a must for any modified turbo diesel. Part No.

Description

Vehicle

BDD1045210 BDD1045215 BDD1047020

1994–02 Intercooler Hose And Clamp Kit 2003–07 5.9L Intercooler Hose And Clamp Kit 1999-03 7.3L Clamp Kit

Dodge Dodge Ford

Part No.

Description

Vehicle

BDD1515931

1998–00 24-valve w/Round MAP Plug

Dodge

BDD1515932

2001 w/Oval MAP Plug

Dodge

BDD1515933

2002 w/Flat MAP Plug

Dodge

BDD1515935

2003–2004

Dodge

BDD1515936

2004.5–07 5.9L 600/610 Series

Dodge

BDD1516000

2003–07 6.0L PowerStroke

Ford

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

101

performance

BD Diesel Performance has the most comprehensive line of diesel performance products, ranging from electronic controls to turbochargers, exhaust brakes and complete transmission assemblies. Choose the leader in diesel innovation.


performance

Dodge Pulse Exhaust Manifold

Transmission Pans

Cast from high silicon ductile iron, these manifolds feature expansion joints that prevent cracking or exhaust leaks and are “pulse tuned” to assist in combustion chamber evacuation and increased exhaust flow. The result is quicker turbo spool-up, reduced backpressure, increased power and better fuel economy. Gaskets sold separately.

High volumes of cool oil equate to long transmission life. BD’s transmission pans increase oil capacity, while their aluminum construction and heat-dissipating fins keep temperature down. As an added bonus, the pan’s increased rigidity prevents case twisting. Kit includes a magnetic drain plug and a port for temperature sending unit.

Part No.

Description

Vehicle

Part No.

Description

Vehicle

BDD1045980 BDD1045981 BDD1045985 BDD1045987 BDD1045986

1988–98 12-Valve Manifold 1988–98 12-Valve Gasket Set 1998–02 24-Valve Manifold 2003–07 5.9L 24-Valve Manifold 1998–07 5.9L 24-Valve Gasket Set

Dodge Dodge Dodge Dodge Dodge

BDD1061500 BDD1061710 BDD1061600

1989–07 5.9L 727/518/47RH/47RE/48RE 1989–07 E4OD/4R100/5R110 2001–05 Duramax Allison 1000/2000

Dodge Ford Chevy

Duramax Full Bore Exhaust Manifold The factory driver’s side exhaust manifold is pinched down to allow for steering shaft clearance which results in a 80% flow restriction. BD’s Full Bore exhaust manifold restores exhaust flow balance, improving power and reducing EGT. Made from high-silicon ductile iron, the Full Bore is drilled and tapped to accept the most popular EGT probes. Part No.

BDD1041460

Description

2001–2008 Duramax Exhaust Manifold

Vehicle

Chevy

Exhaust Brakes Increase slowing power, reduce wear on your truck’s brakes with the original BD Exhaust Brake. Patented Variable Orifice Technology provides peak performance throughout the engine’s RPM range, not just at high rpm. Part No.

Description

Vehicle

BDD2023330 BDD2023139 BDD2023138 BDD1027335 BDD2033137 BDD1027145AP BDD1027145 BDD2023144 BDD1027144 BDD1024118 BDD1024318 BDD1024310

2006-07 5.9L 2004.5-05 Turbo Mount 2003-04 Turbo Mount 2003-05 Remote Mount for 4” Exhaust 1999-02 2003–07 6.0L Auto Transmission 2003–2007 6.0L Manual Transmission 1999-03 7.3L 1994-03 7.3L Remote Mount for 4" Exhaust 2001-04 Duramax LB7 2004-05 Duramax LLY 2006-08 Duramax LLY/LBZ/LMM

Dodge Dodge Dodge Dodge Dodge Ford Ford Ford Ford Chevy Chevy Chevy

Dodge FleX-Plate The BD FleX-Plate is guaranteed to be the industry’s strongest –reliably handle over 1,500 lbs.-ft. of torque. Featuring twice the material of the stock flex plate, these units are forged billet, precision-balanced, SFI approved and Black Oxide coated to resist corrosion and prevents hydrogen embrittlement that can cause cracking. Part No.

Description

Vehicle

BDD1041210

1994–07 5.9L

Dodge

102

Lift Pump Kits The OEM lift pump is barely adequate for the stock engine—so when you start adding the latest performance electronics and bolt-ons, it can soon be overwhelmed by fuel demand, placing additional strain on the injection pump. With BD’s auxiliary Lift Pump Kits, you can add with a proven lift pump to ensure that your injection pump has ample fuel to support over 600 horsepower and/or replace or bypass the OEM pump for more efficient flow. Part No.

Description

Vehicle

BDD1050226 BDD1050224 BDD1050227 BDD1050230 BDD1050229

1998.5–07 5.9L Auxiliary Pump Kit 1998.5–02 OEM Replacement Pump Kit 2003–04 OEM Replacement Pump Kit 1998.5–99 OEM Bypass Pump Kit 2000–04 OEM Bypass Pump Kit

Dodge Dodge Dodge Dodge Dodge

Low Pressure LED Alarm Kit Keep tabs on your truck’s fuel system with the BD low fuel pressure alarm kit, which incorporates a red or amber LED that illuminates if lift pump pressure falls below spec. Inexpensive protection and easy installation! Part No.

Description

Vehicle

BDD1081130 BDD1081133

1998.5–07 5.9L - Red LED 1998.5–07 5.9L - Amber LED

Dodge Dodge

Dodge VP44 “Stealth” Cover For the 1998-2002 Dodge 24V fits onto the VP44 injection pump, providing a secure, sealed connection instead of notching the pump wire for power mods like an Edge Comp or TST box. The Stealth Cover makes for a clean install and easy removal of racing performance boxes, it provides a more reliable connection. Part No.

Description

Vehicle

BDD1050201

1998–02 24-valve 5.9L

Dodge

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Designed to build a truck or SUV to suit the personality and lifestyle of the owner through the use of matched components. Using Belltech suspension components for front drops from 1 to 5 inches and rear drops ranging from 1 to 8 inches, anyone can build a custom sport truck to meet personal objectives. Model

Description

Chevrolet Trucks 1994-03 S10/S15, 4 Cyl.

3" Front Drop, 3" Rear Drop, Complete Lowering Kit Without Shocks

1994-03 S10/S15, 4 Cyl.

3" Front Drop, 3" Rear Drop, Complete Lowering Kit With Front & Rear Nitrodrop 2 Shocks

2005-06 1⁄2 Ton Silverado

3-4" Front Drop, 4" Rear Drop, Complete Lowering Kit Without Shocks

2001-06 1⁄2 Ton Silverado

3" Front Drop, 4" Rear Drop, Complete Lowering Kit With Front & Rear Nitro Drop 2 Shocks

Ford Trucks 1997-03 F-150

2" Front Drop, 4" Rear Drop, Complete Lowering Kit Without Shocks

1997-03 Harley Series

2" Front Drop, 3" Rear Drop, Complete Lowering Kit With Front & Rear Nitro Drop 2 Shocks

Dodge Trucks 1997-04 Dakota

2" Front Drop, 4" Rear Drop, Complete Lowering Kit Without Shocks

2002-05 Ram 1500

2" Front Drop, 5" Rear Drop, Complete Lowering Kit With Front & Rear Nitro Drop 2 Shocks

Motorsports 16v/12v 20/40 Amp Battery Charger BAT021-1158

Portable Power Tender BAT022-0142-DL-WH Portable Power Tender performs 4-step automatic charging, producing 2.5 or 5 amps @ 12 volts. Unit has an LED state of charge indicator and a 72 hour safety timer to protect marginal batteries.

4-Bank Battery Management System BAT022-0148-DL-WH Capable of maintaining up to four auto, motorcycle or ATV batteries at once with 1.25 amps @ 12 volts. Provides four-step charging and a 72 hour safety timer.

Charge 12 or 16 volt batteries. Includes 4-step charging and a rigid steel chassis with short circuit and reverse polarity protection.

Battery Tender Junior BAT021-0123 3-step, fully automatic charging and will maintain all types of batteries. Unit produces 750 milliamps @ 12 volts and has a two-color LED state of charge indicator.

Battery Tender Plus BAT021-0128 4-step, fully automatic charging, produces 1.25 amps @ 12 volts to maintain all types of batteries. Two LED’s monitor battery condition and a 72 hour safety timer protects marginal batteries.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

103

performance

The Belltech Stance


performance

6100 Series With a success rate unequalled in off-road racing history, the 6100 series is still the shock of choice for many off roaders. From sand sports and Baja Bugs to competition buggies the 6100 series out performs the competition. • Self-Adjusting Deflective Disk Valving • 14mm Piston Rod • 1/2” Heim Ends (German Graphite) • High Flow Piston Reduces Harshness Part Number

Travel

Description

Valving

Reservoir

Ext. Length

Col. Length

BILB46-0349-H1

8"

Standard Body

275/78

Y

22.05"

13.82"

BILB46-0359R

8"

Standard Body

180/75

Y

22.05"

13.82"

BILB46-0360R

10"

Standard Body

275/78

Y

25.82"

15.79"

BILB46-1362R

10"

Standard Body

170/60

Y

25.82"

15.79"

BILB46-0360-H1

10"

Standard Body

275/78

N

25.82"

15.79"

BILB46-0350R

12"

Standard Body

360/80

Y

31.1"

19.37"

BILB46-1353R

12

Standard Body

170/60

Y

31.1"

19.37"

8” Travel

10” Travel

12” Travel

Coilover Shocks BILB46-1103†

10"

Coilover With Hardware

255/100

Y

26.65"

17.44"

BILB46-0204-HO

5"

Coilover With Hardware

Custom

N

16.25"

11.25"

(†) Light weight shock recommended for front buggy applications only.

7100 Series Body: 2" Seamless Extruded Tube Rod: 14mm Centerless Ground, Case Hardened, Chromed and Super Polished Piston: 46mm Bilstein Racing Piston Valving: “Self-Adjusting” Deflective Disc Independent Rebound & Compression Coil Over Hardware: 2-1/2" Part Number

Travel

Description

Reservoir

Ext. Length

Col. Length

8"

Reservoir Shock

Y

22.20"

14.21"

8” Travel BILAK7108R

10” Travel BILAK7110R

10"

Reservoir Shock

Y

25.77"

16.10"

BILAK7110S

10"

Schrader Valve Shock

N

25.77"

16.10"

BILAK7110SB

10"

Short Body Reservoir

Y

24.31"

14.29"

BILAK7112R

12"

Reservoir Shock

Y

31.10"

19.53"

BILAK7112SB

12"

Short Body Reservoir

Y

33.84"

19.45"

12” Travel

14” Travel BILAK7114R

14"

Reservoir Shock

Y

35.22"

20.83"

BILAK7114SB

14"

Short Body Reservoir

Y

35.84"

19.45"

*Optional Valvings Ordering

When ordering 7100 Series with an ”AK” prefix, valving must be specified with an optional suffix code shown below. Suffix Code

01

02

03

04

05

06

99

Optional Valvings

150/50

170/60

180/75

255/70

275/78

360/80

Custom

104

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


performance

ACCESSORIES 9100 Rock Crawler Series

Coilover Hardware Kits

The 9100 bridges the gap between the full race and the recreational application. Utilizing a Baja proven 2” 9100 Series damper, the shock is mated with a new, lightweight 2.5”x12” reservoir and is perfect for coil over or non-coil over, long travel, rock-buggy, jeep, and truck use.

Billet aluminum coil hardware kits are available in 2-1/2", 3" and 3-5/8", and include the following: spring hat, lock ring, spring slider (Delron), spring seat and 2 spring stops. Part No.

Decription

BIL192126.............2-1/2" Spring Hardware Kit BIL192124.............3" Spring Hardware Kit BIL192125.............3-5/8" Spring Hardware Kit

Part Number

Travel

Description

Reservoir

Ext

Col

BILB46-9115RCS

14.14

14” Travel 2” Threaded Body

2.5”x 12”

38.87

24.51

BILB46-9118RCS

17.14

17” Travel 2” Threaded Body

2.5”x 12”

43.36

26.22

Digressive Competition Valving Bilstein RCS is now available with an optional Digressive “Rebound Check Valve” Piston. Designed specifically for Rock crawling Competition, valving will greatly enhance vehicle stability while reducing impact harshness. With digressive valving, wheel hop, front to rear/side to side weight transfer, spring unloading and sway will be greatly reduced. Suffix: Digressive Front (10) Digressive Rear (11)

9100 "Rock Crawler" Hardware

2" Coilover Kits Convert your conventional body 7100 and 6100 series 6", 8" and 10" travel shocks to a coilover with the 2" Coilover Kit. Comes with an aluminum threaded sleeve, lock ring, 2-1/2" spring seat and 2-1/2" spring hat. Part No.

Description

BIL193117.............2" Coilover Kit BIL522880.............Circlip BIL193287.............Rod End For Spring Hat Kit requires a circlip to be installed on the shock body and a special rod end to accommodate the spring hat.

BIL192198 2.5” I.D. Spring Hardware Kit

Package will limit shock travel by .74" and includes an aluminum spring seat and lock ring, a Delron slider for dual rate springs and a T6 7075 aluminum spring hat. Description

Part No.

Reservoir Mounting Hardware Urethane Reservoir Buffer ...........................BIL1949244 Reservoir Clamp ..............................................BIL1910644

VW Steering Damper Part Number

Travel

Valving

Reservoir

Ext. Length

Col. Length

Shaft Dia.

BILB22-0028

6.3 VW

35/35

N

16.54

10.24

8mm

Understanding Bilstein Valve Ratings Damping forces of Bilstein valvings for off-road are measured in Newtons at a velocity of 0.52 m/s (approx. 20 inches/sec). The ratings shown correspond to those measurements; rebound force is the first number, followed by compression force (rebound / compression) Higher numbers mean higher (firmer) damping forces. For example, 360/80 has more control (is firmer) than 275/78, while 170/60 has less control (is softer) than 275/78.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

105


performance

Steering You Forward

Double Steering Universal Joints-Steel

Single Steering Universal Joints-Steel Box/Column

Shaft

Part No.

Box/Column

Shaft

Part No.

Box/Column

Shaft

Part No.

3/4” 9/16”-17 5/8”-36 11/16”-36 3/4”-30 3/4”DD 1”DD 1”-48 1”-48 3/4”-36

3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4-”36 3/4”DD 5/8”-36

BRG016464 BRG010964 BRG011864 BRG012564 BRG013164 BRG014964 BRG015264 BRG014334 BRG014349 BRG013418

3/4”-36 3/4”-36 3/4”-36 3/4”-36 3/4”-36 3/4’DD 3/4”DD 3/4”DD 3/4”DD 3/4”DD 1”DD

3/4”-30 3/4”-36 13/16”-36 3/4”DD 1”DD 9/16”-26 5/8”-36 13/16”-36 3/4”DD 1”DD 3/4”-30

BRG013431 BRG013434 BRG013440 BRG013449 BRG013452 BRG014909 BRG014918 BRG014940 BRG014949 BRG014952 BRG015231

3/4”-36 3/4”DD 3/4”DD

3/4”-36 3/4”DD 1”DD

BRG023434 BRG024949 BRG024952

Single Steering Universal JointsStainless Steel Box/Column

Shaft

Part No.

1”-48 3/4”-36 3/4”-36 3/4”-36 3/4”DD 3/4”DD 3/4”DD

3/4”DD 9/16”-26 3/4”-36 3/4”DD 9/16”-26 5/8”-36 3/4”DD

BRG114349 BRG113409 BRG113434 BRG113449 BRG114909 BRG114918 BRG114949

Vibration Reduction Universal Joints-Steel Note: On vibration reduction joints, the spline size of the reduction end is listed first, followed by the spline of the yoke. Description

Part No.

3/4”-36 x 3/4”-36 .............BRG033434 3/4”DD x 3/4”-36 .............BRG034934 3/4”DD x 3/4”DD .............BRG034949 3/4”DD x 1”DD .................BRG034952

Splined Shafts-Steel Note: Shafts are splined 2” on each end. Description

Part No.

Description

Part No.

3/4”-36 x 6” Long ..................BRG409206 3/4”-36 x 12” Long ................BRG409212 3/4”-36 x 8” Long ..................BRG409208 3/4”-36 x 14” Long ................BRG409214 3/4”-36 x 10” Long ................BRG409210 3/4”-36 x 16” Long ................BRG409216

Splined Shafts-Stainless Steel Note: Shafts are splined 1” on each end. Description

Single Steering Universal JointsPolished Stainless Steel Box/Column

Shaft

Part No.

3/4”-36 3/4”-36 3/4”-36 3/4”DD 3/4”DD 3/4”DD

9/16”-26 3/4”-36 1”DD 9/16”-26 3/4”DD 1”DD

BRG123409 BRG123434 BRG123452 BRG124909 BRG124949 BRG124952

Part No.

3/4”-36 x 10”Long..................BRG419210 3/4”-36 x 12” Long .................BRG409212 3/4”-36 x 16” Long .................BRG409216

Replacement Steering Shafts Borgeson offers a number of replacement steering shafts for old, worn out assemblies. All shafts are easily installed with common hand tools and have needle bearing U-joints. Part No.

Description

Chevrolet ⁄GMC BRG934 1979-91 All Models with 3-1/4" Diameter Rag Joint Only

Double “D” Shafts-Steel Description

Part No.

3/4”DD x 18” Long ................BRG409418 3/4”DD x 36” Long ................BRG409436

BRG937 1999-05 All Models, Includes Vibration Reducer BRG938 1999-05 All Models Dodge BRG940 1979-93 Full Size BRG950 1995-04 Full Size Ford BRG970 1970-79 Full Size

3/4”DD x 22” Polished Stainless Steel Double “D” Shaft BRG429422

Jeep BRG873 1997-06 Wrangler TJ, Upper Shaft, Power And Manual BRG874 1997-03 Wrangler TJ, Lower Shaft, Power And Manual BRG875 1997-02 Wrangler TJ, Lower Shaft, Power BRG876 2003-06 Wrangler TJ, Lower Shaft, Power And Manual BRG910 1976-86 CJ w/Power Steering BRG925 1987-95 Wrangler Pwr. Or Man. Steering w/Vibration Reducer BRG926 1987-95 Wrangler Pwr. Or Man. Steering, w/o Vibration Reducer

106

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Borla exhaust systems are built of 100% T-304 Aircraft-quality stainless steel, not mild steel, not aluminum, not coated aluminum. All systems are Cat Back bolt-ons and include muffler, hangers and clamps. Year

Application

Part No.

1999-06

GM Pickup 1500 4.8/5.3l 2&4WD Ext. Cab Short Bed Round Single Tip Angle Cut Phantom Split Rear Exit

BOR14824

2007-08

Tahoe 4.8L/5.3L V8, 2/4WD, AT, 4DR, Dual Round Rolled Angle Cut, Side Exit

BOR140193

2007-08

Yukon, 4.8L/5.3L V8, 2/4WD, AT, 4DR, Dual Round Rolled Angle Cut, Side Exit

BOR140193

2007-08

Silverado/Sierra 1500, V8, 4.8L/5.3L, AT/MT, 2/4WD, 2DR, RC, LB (97.6"), 4DR,EC, SB(69.3"), Single Round Rolled Angle Cut Tip, Split Rear Exit

BOR140215

2007-08

Silverado/Sierra 1500, V8, 4.8L/5.3L, AT/MT, 2/4WD, 2DR, EC, SB (78.7"), CC, SB (69.3"), Single Round Rolled Angle Cut Tip, Split Rear Exit

BOR140231

2007-08

Subur/Aval/Yukon XL, 5.3L/6.0L, V8, AT, 2/4WD, 4DR, Dual Oval Rolled Angle Cut Tip, Split Side Exit

BOR140232

2007-08

Silverado/Sierra 1500, V8, 4.8L/5.3L, AT/MT, 2/4WD, 2DR, EC, SB (78.7"), CC, SB (69.3"), Single Round Rolled Angle Cut Tip, Split Side Exit

BOR140232

Ram 1500, 5.7L V8 Hemi, 2/4WD, AT/MT/, RC,EC,CC,SB, Single Oval Rolled Angle Cut Lined Resonated, Split Side Exit

BOR140068

Ram 1500, 5.7L V8 Hemi, 2/4WD, AT/MT/,CC,SB, Single Round Rolled Angle Cut, Split Rear Exit

BOR140187

1999-04

Ford Lightning 5.4L V8, Dual Round Angle-Cut Phantom Side Exit

BOR14872

2003-06

F-250/350 Diesel Trucks, 6.0L V8, 2/4WD, EC,LB,CC,SB, Single Round Rolled Angle Cut

BOR140095

2000-06

Wrangler, 2.5L 4 Cyl./4.0L 6 Cyl. Inc. Rubicon, 4WD, AT/MT, (With or Without Trailer Hitch), Single Square Angle Cut Phantom

BOR14924

2004-06

4.0L 6 Cyl. Unlimited, 2/4WD, AT/MT, 2DR (With or Without Trailer Hitch), Single Square Angle Cut Phantom

BOR140103

Chevrolet/GMC

2006-08

Borla's R&D engineers have incorporated the patented Borla multi core XR-1™ muffler into 4” CNC mandrel bent oversized, stainless steel, Cat-Back™ and turbo-back systems for diesel trucks. Made from T-304 stainless steel, systems combine maximum flow with awesome sound, lighter weight and solid construction. System includes a massive 5” polished tip. Year/

Model

Part No.

Chevrolet/GMC - Diesel Trucks Only 2003-05

Silverado/Sierra 2500/3500, 6.6L, V8, AT/MT, 2&4WD, 4DR, CRC,SB

BOR140097

2006-07

Silverado 2500/3500, Diesel, 6.6L V8, 2+4WD, AT/ MT, 2+4DR,CC,SB, Single Round Rolled Angle Cut

BOR140181

EC- Extended Cab. CRC - Crew Cab. LB - Long Bed. SB - Short Bed

Dodge 2003-05

Diesel Systems

XR-1 Raceline Racing Mufflers High-flow, one-piece straight-through mufflers will actually outflow a straight piece of pipe. Completely welded, 100% T-304 stainless steel assemblies will maintain their performance, even under the most severe racing conditions. Designed to meet the most stringent noise requirements.

XR-1 Sportsman

Ford

Jeep

Borla’s #1 selling race muffler. Lightweight, compact high flowing muffler satisfies most racing requirements at a competitive price, and works equally well on gasoline or alcohol vehicles. Part No.

In

Out

Body Dimensions

BOR40941 BOR40942 BOR40943 BOR40944 BOR40945 BOR40946

2-1/2" 2-1/2" 3" 3" 3-1/2" 3-1/2"

2-1/2" 2-1/2" 3" 3" 3-1/2" 3-1/2"

4-1/2" H x 7-7/8" W x 12" L 4-1/2" H x 7-7/8" W x 16" L 4-1/2" H x 7-7/8" W x 12" L 4-1/2" H x 7-7/8" W x 16" L 4-1/2" H x 7-7/8" W x 12" L 4-1/2" H x 7-7/8" W x 16" L

XR-1 Stainless Racing Sportsman Round Muffler Lightweight, compact mufflers fulfill the needs for most racing applications and have the highest flow in their class. Perfect for when space is limited. Part No.

In

Out

Body Dimensions

BOR40085 BOR40086

3" 3-1/2"

3" 3-1/2"

5" Dia. x 15" L 5" Dia.. x 15" L

Dual Round Rolled Angle Cut

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

107

performance

BOR14924

Cat-Back Systems


performance

®

Triple Dog Downloader

Triple Dog Gas Downloader

Works on Ford (6.0L), Dodge (5.9L) and GM diesel pickups and includes industry exclusives like on-the-fly horsepower adjustment (50 to 140hp), Internet upgrades and it can be transferred to a different vehicle.

The Triple Dog Gas Downloader is a programmer/tuner that downloads horsepower and performance enhancing programs into three different vehicle makes of pickup trucks in one SKU (stock keeping unit). The downloader offers two different Engine Tunes above stock to accomodate various driving conditions; read below for recommended use.

Model

HP/Torque

Part No.

+120hp/200 Lbs./Ft.

BUL40502

Triple Dog Downloader 1999-03 Ford 3.7L 2003-07 Ford, 6.0L, F250-F550

+115hp/175 Lbs./Ft.

BUL40502

2001-07 GM, 6.6L, 2500-3500

+110hp/200 Lbs./Ft.

BUL40502

2003-07 Dodge, 5.9L, 2500-3500

+140hp/209 Lbs./Ft.

BUL40502

Triple Dog OutLook Combo Downloader Plus OutLook 2003-07 Ford, 6.0L, 2006-07 GM, 2006-07 Dodge

+115hp/175 Lbs./Ft.

BUL41500

2003-05 Dodge

+140hp/209 Lbs./Ft.

BUL42500

2001-05 GM

+110hp/200 Lbs./Ft.

BUL43500

The engine tuning options below describe what tunes are available through the Triple Dog and their recommended use. • Stock: Choosing the Stock engine tune will result in no change to engine horsepower output. All other downloader features can still be accessed if the Stock engine tune is chosen. • Regular: This engine tune is recommended for use with 85 or 87 octane gasoline. For maximum effectiveness end users should increase shift firmness and shift points. This tune can be used for everyday driving and towing. Dynamometer testing results have shown a 10-12hp increase in rear wheel horsepower. • Premium: This engine tune is recommended for use with 91 or 93 octane gasoline. It is recommended that shift firmness and shift points be raised with this engine tune. This tune can be used for everyday driving, towing and racing. Year

Description

HP/Torque Increase

Part No.

2003-08

Dodge Ram, 5.7L Hemi 1500, 2500, 3500

+22 hp/24 Lbs./Ft.

BUL40510

2004-08

Ford F-150, (4.6L, 5.4L)

+23.5 hp/30 Lbs./Ft.

BUL40510

1999-07

GM Pickups and SUV, (4.8L, 5.3L, 6.0L, 8.1L)

+21 hp/18 Lbs./Ft.

BUL40510

OutLook In-Cab Monitor Take control over power levels by pressing a button. Set emergency de-fueling points based on exhaust temperatures. When temperatures reach set levels, the OutLook Monitor will automatically engage and de-fuel to prevent excessive exhaust gas temperatures. The monitor is designed to work with Triple Dog, Bully Dog’s Rapid Power, Dyno Dominator performance modules and the Power Pup downloader, but is also compatible with most diesel chips, performance modules and/or downloaders available on the market.

Features: • On-the-fly Adjustability • 1/4 Mile Calculations, Except On the 7.3L Fords • Option for Two Pyrometer Readings • Engine RPM • Battery Voltage • Adjusts for Aftermarket Tire Sizes • Set Emergency De-Fueling Point Safety Features • Monitors Transmission Slippage on Duramax

• Horsepower Readings • 0-60 Times (MPH) • Accurate Speed Display (MPH) • Induction Temperature • Records 0-60 Times Except on the 7.3L Fords

Year

Description

Part No.

2001-05

GM Duramax, 6.6L, For Use With Triple Dog

BUL40366

1999-03

Ford Power Stroke, 7.3L

BUL40173*

2003-07

Ford Power Stroke, 6.0L, 2006-07 GM, 2006-07 Dodge , All For Use With Triple Dog

BUL40166

2003-05

Dodge Cummins, 5.9L , For Use With Triple Dog

BUL40266

* - Not for use with Rapid Power or Dyno Dominator

108

BLD41573

Power Pup Downloaders Increases horsepower and torque by re-flashing the vehicle’s Engine Control Unit (ECU). Plug the Power Pup into the OBDII port. Provides four horsepower settings to choose from : Stock, towing (50-70 hp), performance (75-90 hp) or extreme (95-230 hp). The Power Pup retains the stock program so the truck can be returned to the original settings. Year

Description

BLD42573

HP/Torque Increase

Part No.

Power Pup Diesel Downloaders 2003-08

Dodge Cummins, 5.9L/6.7L

+130 hp/250 Lbs./Ft.

BUL42573

2003-08

Ford Power Stroke 6.0L/6.4L

+115 hp/175 Lbs./Ft.

BUL41562

2001-08

GM Duramax, 6.6L (LB7,LLY,LBZ,LMM)

+120hp/+230 Lbs./Ft.

BUL43569

N/A

BUL42590

Power Pup Gas Downloaders 2003-06

Dodge, Hemi 5.7L

2004-08

Ford, 4.6L/5.4L

N/A

BUL41590

1998-06

GM, Full Size Truck & SUV 4.3L, 5.3L, 5.7L, 6.0L & 8.1L

N/A

BUL43590

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


performance

®

Rapid Flow Exhaust Systems

A-Pillar Pods For Outlook Monitor

Rapid flow Exhaust Systems have the lowest degree mandrel bends for free flow, low back pressure and lower exhaust temperatures (as much as 200°). Provides a 10-20 horsepower increase, dependent upon upgrade and current output. All systems are down pipe-back unless noted.

Pods mount on the A-Pillar giving a convenient, easy-to-read place for gauges. These pods are all custom molded to fit each model of diesel truck. OutLook monitor sold separately.

Year

Description

HP/Torque Increase

Part No.

4” T-409 Stainless Steel Exhaust Systems 2003-07

Ford 6.0L Power Stroke

+13 hp/27 Lbs./Ft.

BUL181446

2004.5-07

Dodge Cummins, 5.9L - Catback

+14 hp/28 Lbs./Ft.

BUL182447

2004.5-07

GM Duramax LLY, 6.6L - Catback

+14 hp/28 Lbs./Ft.

BUL183440

2001-04

GM Duramax, LB7

+14 hp/28 Lbs./Ft.

BUL183446

4” Aluminized Exhaust Systems 1999-03

Ford 7.3L Power Stroke

+14 hp/28 Lbs./Ft.

BUL181010

2003-07

Ford 6.0L Power Stroke

+13 hp/27 Lbs./Ft.

BUL181050

1994-02

Dodge Cummins, 5.9L

+14 hp/28 Lbs./Ft.

BUL182010

2003-04

Dodge Cummins, 5.9L

+13 hp/27 Lbs./Ft.

BUL182050

2001-04

GM Duramax LB7, 6.6L

+14 hp/28 Lbs./Ft.

BUL183010

2004.5-07

GM Duramax LLY, 6.6L - Catback

+14 hp/28 Lbs./Ft.

BUL183040

Part No.

Description

Dodge BUL32300 .............2003-07 Ford BUL31301 .............2003-07

General Motors BUL33300 .............1999-07 With Speaker BUL33301 .............1999-07 Without Speaker

Gauges 2” high quality gauges are extremely accurate. Pyrometer (Exhaust Gas Temperature), Turbo Boost Pressure and Transmission Oil Temperature gauges are available. Three bezel choices. Part No.

Description

BUL30162

Aluminized Bezel BUL30162 .............Pyrometer Gauge - White Faced BUL30502 .............Boost Gauge - White Faced BUL30503 .............Boost Gauge - Black Faced BUL30302 .............Transmission Gauge - White Faced BUL30303 .............Transmission Gauge - Black Faced BUL30500

Performance Management Tool

5” Aluminized Exhaust Systems 2004.5-07

Dodge Cummins Catback

+15-20 hp/30-40 Lbs./Ft.

BUL182022

1999-03

Ford 7.3L Power Stroke

+15-20 hp/30-40 Lbs./Ft.

BUL181020

2003-07

Ford 6.0L Power Stroke

+15-20 hp/30-40 Lbs./Ft.

BUL181052

2001-04

GM Duramax, LB7

+15-20 hp/30-40 Lbs./Ft.

BUL183020

The revolutionary PMT is an adjustable on the fly downloader, monitor and gauge all packaged into one unit and is available exclusively from Bully Dog. The easy to use interface offers both push button or touch screen navigation; both navigation styles come with each unit and are active all the time. The PMT can be updated over the Internet with ease and speed using the Update Agent™; the simple to use software program developed by Bully Dog Technologies.

Rapid Flow Cold Air Induction

Model

Hp/Torque

Part No.

Dodge, 5.9L, 2003-07

+115 hp/+175 Ft./Lbs.

BUL40300

The RFI is an advanced airflow induction that replaces stock setup to increase horsepower, torque, fuel efficiency and decrease exhaust gas temperatures.

Ford, 6.0L/6.4L, 2003-08

+130 hp/+180 Ft./Lbs.

BUL40300

GM, 6.6L, 2001-08

+140 hp/+209 Ft./Lbs.

BUL40300

Propane Injection System BUL10800

Year

Description

HP/Torque Increase

Part No.

1994-02

Dodge Cummins, 5.9L

+10 hp/15 Lbs./Ft.

BUL52100

2003-07

Dodge Cummins, 5.9L

+10 hp/15 Lbs./Ft.

BUL52101

2003-07 Except 2005

Ford Power Stroke 6.0L

+10 hp/15 Lbs./Ft.

BUL51100

2001-05

GM Duramax, 6.6L

+10 hp/15 Lbs./Ft.

BUL53100

2006-07

GM Duramax, 6.6L Except LLM

+10/15 LBs./Ft.

BUL53101

Realize increases of 80 horsepower, 160 lbs. /ft. of torque, and better diesel mileage. Exhaust temperatures are only slightly increased or may even be decreased. Tank is available separately.

Propane Injection Tank BUL20853 8” x 42”, 8.5 gallon Tank

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

109


performance

Module Assemblies

Aluminum Radiators

Be Cool’s Power Cooling Module Assemblies take the guesswork out of proper cooling. Each Be Cool Module assembly includes a genuine Be Cool Crossflow aluminum radiator, a high-torque electric fan or fans as horsepower requires in Euro black finish, aluminum fan mounting brackets, electric fan wiring harness, a diamond-cut vented coolant recovery tank, a billet Be Cool radiator cap and all necessary fan mounting hardware included. All of the included components have been carefully matched for peak efficiency and every assembly guarantees a minimum 20° coolant temperature drop. A wide variety is available to offer guaranteed cooling results for 400, 700 and 1,000 horsepower applications. If the goal is complete temperature control, regardless of horsepower or ambient conditions, why try anything else? Be Cool guarantees temperature control or money back!

No radiator available could adequately cool a high horsepower, high performance street machine through both comfortable cruising and full-throttle bursts. Using special advanced technology, created the ultimate line of vehicle specific aluminum radiators for high-horsepower vehicles, grueling towing applications or for medium-powered vehicles operating in high ambient temperatures. With over 400 applications, Be Cool products are guaranteed to perform under the most extreme conditions. Call For Applications

11'' Shrouded Dual Paddle-Style Puller Fan BEC95007 11'' Dual Puller Fan Module Assembly Black. 2780 CFM @ 25 amps. Includes Wiring Kit and Mounting Brackets. Overall dimensions: 23-1/2 x 16

BEC70003

BEC70001

BEC70002

Cooling Accessories Part No.

Description

BEC70058

BEC70001 .............Round-Style Billet Radiator Cap With Be Cool Logo BEC70002 .............Octagon-Style Billet Radiator Cap With Be Cool Logo BEC70003 .............Diamond-Cut, Vented Recovery Tank, 7" x 3" With Inlet Fitting And Mounting Bracket BEC70004 .............Diamond-Cut, Vented Recovery Tank, 10" x 2-1/4" With Inlet Fitting And Mounting Bracket BEC70005 .............Stainless Steel Covered Radiator Cap With Be Cool Logo BEC70006 .............Sure-Grip Machined Aluminum Radiator Cap With Embossed Be Cool Logo BEC70058 .............Diamond-Cut, Vented Recovery Tank 7" x 3" With Inlet Fitting And Mounting Bracket

Centerforce I

Centerforce DFX Series Clutches Aimed at “high end” clutch users looking for more holding power and higher integrity, the DFX is engineered for and proven in competition. Choose DFX packages engineered expressly for street strip or full competition.

Centerforce Flywheels Centerforce uses highstrength steel and aluminum billets to manufacture SFI approved flywheels. Steel 700 Series and the steel friction surfaces on aluminum 800 and 900 series flywheels have been heat treated for long life and all flywheels have been CAD/CAM designed and CNC-machined to strict tolerances.

110

The original - offers up to 30% more holding capacity than a stock clutch while maintaining a stock pedal feel. The Centerforce I is recommended as the finest quality upgrade from the original equipment clutch.

Centerforce II Provides up to 60% greater holding capacity than a standard factory clutch. It is recommended for use with mildly modified vehicles used for street and strip.

Centerforce Dual Friction Generates up to a 90% increase in holding capac- ity over stock systems. En- gineered for use with engines producing high horsepower and torque and any radically altered high performance street vehicles.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Adapters simplify the installation of external oil pumps (wet or dry sump systems) or Accusumps by eliminating the remote oil filter and associated hardware. Adapter replaces the stock Chevy bypass so the engine receives filtered oil all the time. Include O-rings, hardware and two oil input ports: one before filtration (for an external oil pump) and one after (for an Accusump). Adapter lowers the filter by 1-1/2". Part No.

Description

CAN22-550...........SB Chevy Oil Input Adapter CAN22-560...........BB Chevy Oil Input Adapter CAN98-002...........Replacement O-Ring Kit

Chevy Billet Remote Oil Cooler Sandwich Adapter Use a remote oil cooler and retain the stock oil filter with Canton’s Billet Aluminum Sandwich Adapter. Adapter lowers the filter 1-1/2" and accepts 1/2" NPT fittings. Includes O-rings and hardware. Part No.

Description

CAN22-540...........SB Chevy Remote Oil Cooler Adapter CAN98-002...........Replacement O-Ring Kit

Chevy Oil Bypass Eliminator CAN22-570 Billet Chevy Block-to-Filter Mount replaces the stock oil filter mount and does not have a bypass to prevent unfiltered oil entering the engine. Replacement O-Ring Kit CAN98-003

Chevy Billet Remote Oil Filter Adapter Aluminum adapter is ideal for wet sump systems where a remote filter must be used. Inlet and outlet ports are 1/2" NPT. O-rings and hardware are included. Part No.

Description

CAN22-580...........SB and BB Chevy w/Straight Inlet and Outlet Ports CAN98-002...........Replacement O-Ring Kit

Heavy Duty Oil Accumulators

CAN24-006

Surge Protection

Accusump Oil Accumulators provide an extra margin of protection against engine damage caused by lack of oil pressure. As the oil in the pan sloshes, the pickup can become uncovered, causing a loss of oil pressure. The Canton Accusump provides oil during these times, reducing the chance of damage. Pre-Oiling

Research indicates the majority of wear occurs during start-up, before oil pressure is established. The Accusump delivers oil under pressure before engine is spun over. Rugged Construction

Built from 4-1/4" dia. aluminum tube with a roller burnished, Teflon coated inside, double O-ring piston, screw-in aluminum end caps, air pressure gauge, air pre-charge valve, safety blowoff and a manual or electric valve. Manual or Electric Operation Valves

The manual valve provides positive control and can be mounted on the Accusump or in the feed line. The electric control valve simplifies the operation of the Accusump and can provide automatic pre-oiling when tied into the ignition switch. The electric valve units are ideal where it is difficult to access a manual valve.

3 Qt. Accusump CAN24-006 16" long, 4-1/4" dia.. Accusump is recommended for large cubic inch engines or when severe oil pressure fluctuation problems are experienced. Manual or electric valve kit sold separately.

2 Qt. Accusump CAN24-026 12" long, 4-1/4" dia.. Accusump is recommended for surge control on small block V-8, V-6 and 4 cylinder engines. Ideal for use in applications where mounting space is restricted. Manual or electric valve kit sold separately.

Mounting Clamps CAN24-200 Stainless steel, T-clamp mounting brackets will mount all 4-1/4" Accusumps.

90° Rotating Billet Remote Oil Filter Adapters

Accusump Manual Valve Kit

The aluminum adapter’s 90°, 1/2" NPT inlet and outlet ports can be rotated, simplifying hose and fitting connections. Ideal when stock filter location cannot be used. Includes O-rings and hardware.

Manual Accusump ball valve has 1/2" NPT fittings and a pipe nipple.

Part No.

CAN24-270

Description

CAN22-592...........Chevy, 13/16"-16 Thread and 3-1/4" Seal CAN22-595...........Ford/Chrysler, 3/4"-16 Thread and 2-5/8" Seal CAN98-004...........Replacement O-Ring Kit

Remote Oil Filter Mounts Cast filter mount has one 1/2" NPT inlet, two 1/2" NPT outlet ports and an extra 1/2" NPT port. Billet mounts have two 1/2" NPT input and two 1/2" NPT outlet ports. Part No.

CAN24-260

Accusump Electric Valve Kit Electric Valve Kit is useful when the Accusump is mounted in a hard-to-reach location or where a manual valve is not practical. When wired directly into the ignition switch, the Accusump automatically activates when switch is on to provide pre-oiling. All manual Accusumps with 1/2" NPT can be converted. Kit includes electric control valve, 1/2" NPT nipple, toggle switch, wire and terminals.

Description

CAN22-600...........Cast, Accepts Chevy Spin-On Filters, 13/16"-16 CAN22-620...........Billet, Accepts Chevy Spin-On Filters, 13/16"-16 CAN22-625...........Billet, Accepts Ford Spin-On Filters, 3/4"-16

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

111

performance

Chevy Billet Oil Input Sandwich Adapters


performance

Accusump Electric Pressure Control Valving CAN24-273 E.P.C. valving combines the convenience of an electric valve with the rapid refill rate of a manual valve. The Accusump will discharge oil when oil pressure drops below 35 PSI and only refill when the pressure rises above 40 PSI. Includes regulator, toggle switch and hardware.

Check Valve CAN24-280 Check valve insures that oil being discharged from Accusump lubricates the engine bearings and is not fed back to the pump. A must in system where a remote filter or cooler is used. 1/2" NPT inlet and outlet.

Remote Canister Oil Filter CAN25-106 Extruded aluminum remote oil filter is 6" tall x 3-1/4" square with 1-1/16"-12 straight Oring ports. Includes stainless mounting clamp.

Canister Fuel Filter Extra high flow filter has a 3-1/4" square x 4" tall extruded aluminum housing with an 8 micron element. Stainless mounting clamp included. Part No.

Description

CAN25-912...........Canister Fuel Filter CAN26-602...........Replacement Element

SB Chevy Tall Valve Covers w/Cross-Over Breathers Valve covers are connected by a crossover tube with two 5" breather stacks for effective crankcase ventilation. Tube is positioned ahead of water neck. Use Canton CAN65-500, CAN65-190 or similar breathers. Covers and tubes clear stud girdles and valvetrain assemblies. Connecting hoses and clamps are included. Choice of steel or aluminum covers. Part No.

Description

CAN65-190...........SBC Tall Steel Valve Covers w/o Canton logo

112

SB Chevy Short Water Pump Pulley Set For Wet Sump Circle Track, Road Race and High Performance Street small block Chevy engines operating in the 3000 to 6500 RPM range. Part No.

Description

CAN75-110................. Crank Pulley, 5.50" Double Groove CAN75-130................. Water Pump Pulley, 7" CAN76-415................. Crank Drive Mandrel, 2.35" Aluminum CAN75-284................. Power Steering Pump Bracket CAN77-500................. Alternator CAN75-208................. Alternator Pulley CAN75-209................. Alternator Pulley For Low RPM Use CAN75-220................. Alternator Bracket Other Accessories CAN76-545................. Balancer Bolt CAN74-900................. Crank Pulley Shim Kit CAN74-910................. Water Pump Shim Kit CAN75-610 to CAN75-635................. Fan Spacers Belts NAPA 25-08253 ........ Crank-Water Pump NAPA 25-10303 ........ Crank-Water Pump-Alternator w/CAN75-208 NAPA 25-10803 ........ Crank-Water Pump-Alternator w/CAN75-209 NAPA 25-07383 ........ Crank-Power Steering Note: Crank pulley ratios: Water Pump-78%, Power Steering-58%, Alternator w/CAN75-208-70%, Alternator w/CAN75-209-108%

SB Chevy Long Water Pump Pulley Set Pulleys change water pump and alternator speed to the proper level for small block Chevy engines operating in the 3500 to 7500 RPM range, saving horsepower. 2-3/4" pump drive groove on the crank pulley underdrives the power steering pump to insure longevity for pump and hoses. Part No.

Description

CAN74-160 ...................... Crank Pulley, Dual 5.5" Grooves, One 2.75" Inner Groove CAN74-570 ...................... Water Pump Pulley, Dual 7" Grooves CAN75-204 ...................... Alternator Pulley For Low RPM Use Other Accessories CAN76-527 ...................... Balancer Bolt CAN74-900 ...................... Crank Pulley Shim Kit CAN74-910 ...................... Water Pump Shim Kit CAN75-610 ...................... 1" Fan Spacer CAN75-635 ...................... 3-1/2" Fan Spacer Note: Crank pulley ratios: Water Pump-78%, Power Steering-92%, Alternator w/CAN75-200-110%, Alternator w/CAN75-204.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Canton’s 74-000 series racing pulleys have the same belt spacing as stock GM pulleys and are configured for use on long water pumps with stock accessories. Pulleys can be interchanged individually or as a set while keeping proper belt alignment and retaining stock accessories. Crankshaft Pulley CAN74-160 SB Chevy 5-1/2" and 2-3/4" 3-Groove Crank Pulley. Two 5-1/2" grooves align with CAN74-570 or GM two-groove water pump pulleys. An inboard 2-3/4" groove drives the power steering pump. Use with CAN74-610, CAN74-622 or GM 2-groove power steering pulley. Use balancer bolt CAN76-542. Crankshaft Pulley CAN74-170 SB Chevy 5-1/2" 2-Groove Crank Pulley replaces larger GM 2-groove crank pulleys to reduce the speed of accessories. Use balancer bolt CAN76-527. Water Pump Pulley CAN74-570 Chevy 7" 2-Groove Water Pump Pulley lines up with CAN74-000 or GM pulleys. Reduces water pump speed on high RPM engines and works well with short or long water pumps.

SB Chevy Racing Pulleys for Short Water Pumps CAN75-000 series crank pulleys align with CAN75-000 series pulleys. Shim Kits CAN74-900 or CAN74-910 may be required to achieve correct alignment with some aftermarket water pumps and other style pulleys. Crankshaft Pulley CAN75-110 5.50" Dia.. SB Chevy Double Groove Crank Pulley can be used with Canton’s Alignment Bushing CAN75-500, Balancer Bolt CAN76-527 or a Canton drive mandrel. Water Pump Pulleys 75-000 series water pump pulleys are designed to work with a standard short water pump. Pulleys include adapter bushing, enabling them to be used on water pumps with either a 5/8" or 3/4" shaft. When used with aftermarket pumps, crank pulley shim CAN74-900 may be required to achieve alignment. Part No.

Description

CAN75-130...........Double 7" Dia.. Groove Pulley CAN75-135...........Double 7" Dia.. Groove w/third 4-1/2" Accessory Drive Groove Pulley CAN75-150...........Double 5.875" Dia.. Groove Pulley

Water Pump Mounted Drive Pulley CAN75-280 An excellent way to add an extra drive pulley. 3-3/4" diameter drive pulley mounts on the front of the water pump pulley and can be used to drive the power steering pump or alternator. Works with 5/8" or 3/4" shaft water pumps.

SB Chevy Pulley Shim Kits Compensate for variances in pulleys for perfect belt alignment. Each kit includes aluminum shims in thicknesses of 1/16", 1/8" and 3/16". Part No.

Description

CAN74-900...........Crank Pulley Shim Kit CAN74-910...........Water Pump Pulley Shim Kit

Chevy Water Necks CAN80-006 Lightweight, billet aluminum water neck may be flipped so that the -16AN outlet faces right or left. Flange filler top accepts standard radiator caps. Machined with two 3/8" NPT ports for cooling lines and a 1/2" rear port for a temperature sender. CAN80-090 Filler neck accepts a standard radiator cap and may be used as a replacement top for Canton water necks. CAN80-116 Billet aluminum riser plate features O-Ring seals at the top and bottom, a 1/2" NPT front port for a temperature sender and two 3/8" NPT ports for cooling lines. CAN80-000 Filler neck works on cars where the engine is the highest point. Necks fill point allows air to escape the system. Note: An extra high pressure cap should be used with this water neck.

CAN80-010 Bleeder water neck provides a positive way to make sure all air is bled out of the engine. Works with systems where an expansion tank is used as a fill point.

Power Steering Reservoir Tank CAN77-250 Use lightweight aluminum power steering tank with remote fluid reservoir. Tank has 3-1/4" diameter and 8" height, including the top. Bottom outlet is 1/2" NPT and return line fitting is 3/8" NPT. Tank is baffled for better fluid control and is complete with heavy duty stainless steel mounting clamp.

Coolant Expansion/Fill Tank CAN80-200 Lightweight aluminum expansion tank has a 1/2" NPT bottom fitting and a 3/8" NPT side fitting. Tank has a 1-1/4 quart capacity with a built-in mounting bracket and accepts standard radiator caps. Recommended when the top of the radiator is mounted lower than the engine. Mounting this tank higher than the engine ensures a complete fill and provides an air space for expansion.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

113

performance

SB Chevy Racing Pulleys for Long Water Pumps


performance

Phenolic Carburetor Spacers and Adapters Spacers effectively extend the carburetor barrels for improved fuel mixture and distribution. Phenolic material insulates the carburetor from engine heat, providing a denser fuel mixture and improved performance.

Rochester and Holley 2BBL Carburetor Spacers

Holley 2BBL Carb Adapter To Holley 4BBL Intake CAN85-060

Two hole carb spacers have Rochester and Holley 2BBL carburetor mounting patterns and are for use with matching intakes.

Our most popular carb spacer. Adapts Holley R4412 2BBL carburetor to 4BBL manifolds with the Holley bolt pattern.

Part No.

Holley 2BBL Carb Adapter To GM 2BBL Intake CAN85-050

Description

CAN85-030...........Rochester 2BBL, 1" Thick (Use CAN85-520 Mounting Studs) CAN85-032...........Rochester 2BBL, 1/2" Thick (Use CAN85-510 Mounting Studs) CAN85-040...........Holley 2BBL, 1" Thick (Use CAN85-520 Mounting Studs)

Rochester Quadrajet 4BBL 4-Hole Carburetor Spacers Part No.

Description

CAN85-250...........1" Thick (Use CAN85-520 Mounting Studs) CAN85-252...........1/2" Thick (Use CAN85-510 Mounting Studs)

Adapts popular R4412 carburetor to stock GM 2-barrel intake, delivering improved performance.

Holley 2BBL Carb Adapter To Edelbrock Performer Intake CAN85-065

Holley 4BBL 4-Hole Carburetor Spacers

Used to adapt popular R4412 carburetor to Edelbrock Performer and other 4BBL manifolds using standard 4BBL bolt pattern.

Spacers, are designed for use with popular 4150/4160 Holley 4BBL 600 CFM and larger carburetors.

Holley 2BBL Carb Adapter To Q-Jet 4BBL Intake CAN85-070

Part No.

Phenolic spacer adapts Holley R4412 2BBL carburetor to Rochester Quadrajet 4BBL intake manifolds.

Description

CAN85-150...........1" Thick (Use CAN85-520 Mounting Studs) CAN85-152...........1/2" Thick (Use CAN85-510 Mounting Studs) CAN85-155...........2" Thick (Use CAN85-530 Mounting Studs)

Holley 4BBL Open Style Carburetor Spacers Open style spacers increase the plenum area under the carburetor, improving fuel distribution. Part No.

Description

CAN85-160........... 1" Thick, Holley 4150/4160, (Use CAN85-520 Mounting Studs) CAN85-162...........1/2" Thick, Holley 4150/4160, (Use CAN85-510 Mounting Studs)

Holley 4BBL 4-Hole Blended Carburetor Spacer CAN85-158 Specially contoured 1" thick spacer is designed for 4150/4160 Holley 4BBL carbs and aids air flow and fuel distribution.

Lightweight Compact Alternator CAN77-500 Lightweight compact alternator is built to deliver the amps required by high energy ignition systems at high RPM. Completely rebuilt to racing specifications with a self exciting, spike-resistant regulator. Alternator is rewired for one wire operation and works well with Canton’s Universal Alternator Bracket CAN75-220 and Alternator Pulleys CAN75-208 or CAN75-209.

114

Carb Mounting Studs Stainless steel stud kits include four studs with locking flange nuts. Part No.

Description

CAN85-510...........2" Long 5/16"-18, Use With 1/2" Carb Spacers CAN85-520...........2-1/2" Long 5/16"-18, Use With 1" Carb Spacers CAN85-530...........4" Long 5/16"-18, Use With 2" Carb Spacers

SB Chevy Phenolic Fuel Pump Plate CAN85-000 Directly replaces steel plate between fuel pump and block to limit heat transfer.

Chevy Universal Alternator Mounting Bracket CAN75-220 Gold anodized billet aluminum bracket is compatible with GM, Honda, ND or Mitsubishi alternators. May be used on right or left side of the engine in the high or low position and includes hardware.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Designed for Chevy small block V8 swapped into the S-10/S-15 pickup and Blazer 4x4 chassis. Pan has a crank scraper, screen windage tray, slosh baffle, magnetic drain plug, and a provision for Canton's pan mounted dipstick (CAN20-850). Part Nos.

Description

CAN16-100...........Oil Pan For Pre-1986 Blocks CAN16-100T ........Oil Pan For 1986-Up Blocks With One Piece Seal CANM211S ...........Pickup For Use With SB High Volume Pumps, MELM155HV

Ford 351W And 429-460 Rear Sump Truck Pans Designed for Ford 4WD trucks, pan features slosh baffle, magnetic drain plug, crank scraper, and a provision for Canton's pan mounted dipstick (CAN20-850). CAN16-774 Ford 429-460 pan has a trap door baffle. Part Nos.

Description

CAN16-674...........For 351W With 2 Bolt Rear Mains CAN16-675...........Pickup For CAN16-674 With MELM83 Or MEL83HV Pumps CAN20-953...........Main Cap Pickup Bolt CAN16-774...........Oil Pan For All 429-460 Blocks CAN16-775...........Pickup For CAN16-774 With MELM84D Or MEL84DHV Pumps CAN20-956...........Main Cap Pickup Bolt Will not clear crossover exhaust. Designed for use with long tube headers.

SB Chevy Pro Plus Windage Tray CAN20-908 An integral part of the Pro Plus oil recovery system, windage tray mounts on main caps to seal the pickup area and prevent oil from splashing out. Mount with CAN20-921 stud kit

Screen Style Windage Trays Reduces windage and improves oil control for more power. Oil drains into sump, rather than splashing on rotating assembly. Part No.

CAN20-911

Description

CAN20-906...........Universal Screen Windage Tray Kit, 22" x 12" CAN20-910...........SB Chevy, Short Style Tray, LH Dipstick, Use CAN20-920 Stud Kit CAN20-911...........SB Chevy, Full Length Tray, LH Dipstick, Use CAN20-920 Stud Kit CAN20-932...........SB Ford 351W, Rear Sump Applications, Use CAN20-942 Stud Kit

Chevy Pressure Balanced Oil Pumps New pumps are reworked to provide a smooth, continuous flow of oil throughout the RPM range. The bypass passages are enlarged and a feeder groove is added to limit cavitation (for high RPM racing operation). Pump housings bleed some of the high pressure back into the gears for smoother operation and more constant pressure. Part No.

Oil Pan Accessories

performance

SB Chevy S-10 V8 Conversion Oil Pan

Description

CAN21-500...........SB Chevy Std. Volume CAN21-540...........SB Chevy High Volume CAN21-560...........SB Chevy High Volume w/3/4" Inlet CAN21-640...........BB Chevy High Volume

CAN21-500

For Chevy SB Oil Pans Part Nos.

Description

CAN20-850...........Dipstick Kit For Oil Pans With Oil Pan Mounted Dipstick Provision CAN88-100...........Gasket Set For Pre-1985 SBC Blocks CAN22-300...........Chevy SB Oil Pan Stud Kit

For Ford Oil Pans Part Nos.

Description

CAN20-850...........Dipstick Kit For Oil Pans With Oil Pan Mounted Dipstick Provision Windage Trays CAN20-932...........Rear Sump Windage Trays For 351W Engines CAN20-936...........One-Way Screen Front And Rear Sump Windage Tray For 429-460 Engines CAN20-942...........Windage Tray Mounting Kit For 351W Engines CAN20-946...........Windage Tray Mounting Kit For 429-460 Engines Mounting Kits CAN22-360........... Oil Pan Stud Kits For 351W And 429-460

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

115


performance

Floor Mount Dual Cylinder

Master Cylinders

Pedal assembly has an adjustable balance bar for dialing in front/rear pressure ratios. Standard pedal length is 10-1/4" for a 5:2:1 ratio.

Extremely lightweight master cylinders feature an American alloy casting by CNC, with 1/8" pipe thread and standard 2-1/4" mounting pattern. Overall height at reservoir is 4" on rectangular cylinders. Includes clevis and fitting.

Part No.

Description

Series 204 CNC204ADTE-3/4 ..........With Aluminum Pedal Tall Master Cylinder And Easy Fill Lid 3/4" Bore CNC204SDTE-3/4 ...........With Steel Pedal Tall Master Cylinder And Easy Fill Lid 3/4" Bore

Bore Size

Reservoir Style

Cylinder Part No.

Repair Kit No.

3/4" 7/8" 1"

Rectangular Rectangular Rectangular

CNC705F-3/4 CNC705F-7/8 CNC705F-1

CNC907S CNC911S CNC915S

Swing Mount Dual Cylinder Swing pedal has an adjustable balance bar for dial-in of front and rear pressure ratios. Pedal length is 15" for a 8.4:1 Ratio Part No.

Blue anodized replacement clevis assembly fits all CNC assemblies.

Description

Series 214 CNC214SDTE15-3/4 ......With Steel 15" Pedal Tall Master Cylinder With Easy Fill Lid 3/4" Bore CNC214SDSA15-3/4 .....With Aluminum 15" Pedal Aluminum Non Reservoir Master Cylinder 3/4" Bore

Reverse Swing Mount Dual Cylinder Assembly has an adjustable balance bar for dial in of front and rear pressure ratios. Pedal length is 16-1/4" for a 8.7:1 ratio. Part No.

Clevis and Pin CNC1457B

Description

Series 224 CNC224SDTE1614-3/4 .......With 16.25" Pedal Tall Master Cylinder And Easy Fill Lid 3/4" Bore

Single Cylinder and Steel Pedal Assembly CNC254S Includes floor-mount lightweight cast aluminum bracket, steel pedal and 3/4" bore rectangular reservoir master cylinder. Accepts 3/16" brake line. Pedal is 10-1/4" long for a 5.2:1 ratio.

Master Cylinder Accessories Part No.

Description

CNC1458 ...............Rectangular Cover w/Twist Cap and Gasket CNC870-2 .............2 Lb. Residual Pressure Valve ALL50000..............Straight Fitting 1/8"NPT To -3AN ALL50001..............Straight Fitting 1/8"NPT To -4AN ALL50120..............Straight Fitting 1/8"NPT To 3/16" Inv. Flare ALL50125 ALL50125..............90° Fitting 1/8"NPT To 3/16" Inv. Flare

CNC1458

ALL50000

Balance Bar Adjuster Adjust the brake balance bar on dual master cylinder brake systems from the driver seat. By turning the knurled knob in 1/4 rotation “clicks” the front/rear brake pressure can be adjusted for changing track conditions. Part No.

Description

CNC830-2 .............With 2' Cable CNC830-3 .............With 3' Cable CNC830-5 .............With 5' Cable

Balance Bar CNC1215 Space saving design permits ideal front/rear braking ratio. Part No.

Description

CNC1215 ...............Balance Bar CNC1216 ...............Replacement Rod Ends For CNC1215

Throttle Cables and Accessories Brake Pedal CNC204SLMC Floor mount pedal assembly consists of a sturdy lightweight cast aluminum bracket and a steel pedal. Accommodates two master cylinders with standard 2-1/4" bolt patterns and includes an adjustable balance bar for dial-in of front to rear bias. Pedal is 10-1/4" long for a 5.2:1 ratio. Master cylinders must be purchased separately.

116

Supreme cables are made for tight radius applications. Available in 3', 4', 5', 6', 7', 8', 10', or 12' lengths. Part No.

Description

CNC820-* ..............Supreme Throttle Cable CNC841 .................Aluminum Half Clamp CNC842 .................3/16" Ball Joint-Quick Release Cable End CNC843 .................3/16" Rod End-Cable End CNC845 .................Clevis and Pin-Cable End CNC846 .................Hook Clamp-For Quick Cable Removal CNC847 .................Cable Clamp and Shim *Specify Length

CNC842

CNC846

CNC847

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Series 631 Six Piston Calipers

• Hub machined from 7075T6 billet aluminum. • Complete ready to use assembly includes 14mm x 1.5 studs and nuts. • Seals, bearings and races included. • Brake pads included. • Caliper is machined from billet aluminum. • 11” Diameter .300 thick steel rotors. • 1.75” stainless steel pistons.

631 Series calipers are a 6-piston design and weigh 5.2 pounds each. Piston diameters are 1.375” , 1.5” and 1.74”. Rotor diameter can range from 9” to 14”. Caliper mounting bracket hole spacing is 6” and the brake pad size is 6” like Hawk's HB102. • Strongest available but still lightweight. • Machined from billet aluminum. • Internal crossover passage - No external tube assemblies to break. • Uses grade 8 bolt to hold pads, not a clevis pin. • Stainless steel pistons.

Part No.

Description

CNC654W ...............................4 Piston Calipers Standard Wright Spindles CNC656W ...............................2 Piston Calipers Standard Wright Spindles

Rear Disc Brake Kit • Hub machined from 7075T6 billet aluminum. • Complete ready to use assembly includes 14mm x 1.5 lug studs and nuts. • Brake pads included. • Caliper is machined from billet aluminum. • 11” Diameter .300 thick steel rotors. • Four 1.75” stainless steel pistons. • Seals, Bearings, And Races Included. Part No.

Part No.

performance

Front Disc Brake Kit

Description

CNC631R .................................Right, 1.375", 1.5", 1.74" CNC631L .................................Left, 1.375", 1.5", 1.74"

Description

CNC664L .................................VW Long 2-1/2" CNC664S .................................VW Short 2"

Long and short refers to the length of spline.

Micro Stub Rear Disc Brake Kit 5 Lug CNC643N-CNC • Hub machined from 7075T6 billet aluminum. • Complete ready to use assembly includes 4mm x 1.5 lug studs and nuts. • Brake pads included. • Caliper is machined from billet aluminum. • 11.5” Diameter .300 thick steel rotors. • Bearing assembly included. • Includes adapter hub, mounting and caliper brackets. • Micro stub shafts are not included in any of the kits below, but can be purchased separately. Specify CV Size.

Spark Plug Indexing Tool ALL96510 Indexing positions the ground strap of the spark plug for best piston dome clearance and unshrouds the electrode for a more even burn and possible gains of 5-15 horsepower. Works with flat gasket or taper seat 14mm spark plugs. Includes instructions.

Aluminum Gas Pedal Pedal has a built-in side foot rest, non-skid surface, three location mounting points, throttle stop and a builtin return spring. Overall height is 8-1/4". Part No.

Description

CNC174S .................................Straight Up Gas Pedal CNC174 ...................................12° Angle Gas Pedal

Spark Plugs Provide spark for a Truck or a 400+ cubic inch Off-Road An exclusive chromium-nickel ground electrode offers superior erosion resistance and extended life. The copper core center electrode enhances thermal capacity for peak performance at all engine speeds. Call for applications.

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES

117


performance

Rear View Mirror with Mounting Bracket COL7328 Large 5" diameter, flat face mirror gives optimal side and rear vision.

Wide Angle Mirror and Clamp-On Brackets Mirror has up to three times more visibility than most standard mirrors. Part No.

Description

COL16741 .............Wide Angle Mirror with 1-3/4" Brackets COL16742 .............Wide Angle Mirror, No Brackets

Aluminum Driveshafts Driveshafts are made from 3.0" O.D. x .125" wall aluminum tubing, fitted with super durable 6061-T6 billet aluminum end yokes and GM 1310 series (1-1/16" x 3-7/32") u-joints, and can reduce rotating weight by up to 8 lbs. Slip yoke must be purchased separately. Driveshaft measurements are from u-joint center line to u-joint center line. Part No.

Length

COL16603 ...............36" COL16604 .......... 36-1/2" COL16605 ...............37" COL16606 .......... 37-1/2" COL16607 ...............38" COL16608 .......... 38-1/2" COL16609 ...............39"

Part No.

Length

COL16610 ...........39-1/2" COL16612 ...............40" COL16613 ...........40-1/2" COL16614 ...............41" COL16615 ...........41-1/2" COL16616 ...............42" COL16617 ...........42-1/2"

Part No.

Length

COL16618 .............. 43" COL16619 .......... 43-1/2" COL16620 .............. 44" COL16621 .......... 44-1/2" COL16622 .............. 45"

Rotor COL140-753 Heavy duty straight vane rotor is 1" x 10-1/2" Dia.., 10-bolt pattern (36 vanes). Use with billet steel hub and stock caliper.

2:1 Brake Bias Adjusters Available in two versions, clampon mounts to 1-3/4" dia.. tubing, while the universal bolt-on mounts to a roll bar or bracket. CNC-machined billet aluminum housings have extra long handles with bearings, billet aluminum cranks and heavy duty bronze gears and bushings. The smoothest brake adjusters, ideal for race cars requiring constant brake adjustments. Part No.

Description

COL20791 .............2:1 Brake Adjuster, Bolt-On, 4' Cable Length COL20795 .............2:1 Brake Adjuster, Clamp-On, 2' Cable Length

“Rod Ruler” COL21790 Quickly and accurately measure tie rods, trailing arms, upper third links or any linkages fitted with rod ends. Stepped boss automatically aligns the rod end on center for a perfect measurement. Compatible with 5/16", 3/8", 7/16", 1/2", 5/8" and 3/4" rod ends, linkages up to 36" long, or torque absorbers with up to 5-1/2" dia. springs.

Slip Yokes The perfect complement to a Coleman driveshaft. COL1330-351 is extra long for use with extended suspension travel. Part No.

Description

COL853-Y* ...................Fits GM Powerglide, Saginaw 3/4 Speed, 26-Spline, 5.500" Long COL1310-400* ...........Fits GM TH-400, Muncie M-22, Jerico, 32-Spline, 5.500" Long COL1330-351† ............Fits GM Powerglide, Saginaw 3/4 Speed, 26-Spline, 6.750" Long *1310 (3-7/32"). †1330 (3-7/32" x 3-5/8").

Sure Stop II Brake Recirculator DPI2160 Aluminum Steering Coupler DPI2225 Body and slider made of aircraft-quality 6061 aluminum. The DPI Auto Hub is pinless, and spring-loaded for quick disconnects. The splined steel shaft must be welded to steering column.

Quick Lift Jack Oil DPI2000

With the Sure Stop II SelfBleeding Brake Fluid Recirculator and Master Cylinder Equalizer, the rear master cylinder feeds the front until the pressure rises. Then the front and rear master cylinders work separately. The result: reduced pedal travel, reduced rear wheel lock-up, and consistent brake balance throughout the entire race.

For faster lifting action without foaming. Jack oil should be changed every three months for maximum performance.

Sure Stop Brake Recirculator

Cross Over Tube DPI2108

Recirculator continuously circulates the brake fluid through the calipers and back to the master cylinder, eliminating heat build-up and fluid boiling. Includes a built-in closed loop system safety feature to prevent brake loss, a common problem with open line return systems. NASCAR approved.

Fits Sierra XL or Wilwood Superlite calipers when using 1.25" rotors. One required per caliper. Features -3AN brake line end. Sold in pairs.

118

DPI2150

2008-09 PERFORMANCE AND OFF ROAD TRUCK PARTS AND ACCESSORIES


Road Demon Jr. Carburetors

Exceptional air flow capabilities, accurate fuel metering and precise fuel curve make it the ideal street/strip carburetor. Available in twin squirter or vacuum secondary configurations. Electric Choke mechanism is available separately.

An ideal performance upgrade for street driven small blocks with mild cam profiles less than 220 degrees at 0.050”. The Jr. delivers crisp throttle response, easy tuning and great fuel economy. Choose among 525, 625 and 725 cfm standard models, all with manual choke (electric choke is optional), 2-corner idle, MaxDensity-cast baseplate and metering blocks. Short overall length makes the Road Demon Jr. perfect for inline, dual quad setups, too.

Part No.

Description

DEM1282010............................... Mechanical Secondary 650 CFM DEM1282010VE.......................... Vacuum Secondary 650 CFM DEM1282010VFE ....................... Vacuum Secondary 650 CFM with Ford Kickdown Linkage DEM1402010............................... Mechanical Secondary 750 CFM DEM1402010VE.......................... Vacuum Secondary 750 CFM DEM1402010VFE ....................... Vacuum Secondary 750 CFM with Ford Kickdown Linkage DEM1563010............................... Mechanical Secondary 850 CFM DEM1563010VE.......................... Vacuum Secondary 850 CFM DEM1563010VFE ....................... Vacuum Secondary 850 CFM with Ford Kickdown Linkage DEM421440 ................................. Electric Choke Kit

Road Demon Carburetors The Road Demon is an impressive performer with a remarkably smooth choke tower design, vacuum secondaries and patented air entries. It offers extremely smooth operation with strong throttle response. Part No.

Description

DEM1181230E ............................. 350 2 BBL. Demon Electric Choke DEM1181230M ............................ 350 2 BBL. Demon Manual Choke DEM4282010VE........................... 625 CFM Gas with Vacuum DEM4282010VFE ........................ 625 CFM Gas with Vacuum and Ford Kickdown Note: Some Demon Carburetors have letters after the part number ( Ex. VFE ) V=Vacuum Secondaries F= Ford Kickdown E= Electric Choke

Part No.

performance

Speed Demon Carburetors

Description

DEM6282020VM ......................... 525 CFM Road Demon Jr. w/Manual Choke DEM6282020VE........................... 525 CFM Road Demon Jr. w/Electric Choke DEM6282020VFE ........................ 525 CFM Road Demon Jr. w/Ford Kickdown, Electric Choke DEM6282010VM ......................... 625 CFM Road Demon Jr. w/Manual Choke DEM6282010VFM ....................... 625 CFM Road Demon Jr. w/Ford Kickdown, Manual Choke DEM6282010VE........................... 625 CFM Road Demon Jr. w/Electric Choke DEM6282010VFE ........................ 625 CFM Road Demon Jr. w/Ford Kickdown, Electric Choke DEM6402020VM ......................... 725 CFM Road Demon Jr. w/Manual Choke DEM6402020VE........................... 725 CFM Road Demon Jr. w/Electric Choke DEM6402020VFE ........................ 725 CFM Road Demon Jr. w/Ford Kickdown, Electric Choke

How To Tune and Win Demon Carburetion Book SAB68 Written by Ray Bohacz, the 160 page book is a detailed, easily understood look at the Demon carburetor and how it functions. Includes tuning tips for track and street, plus information about the basics of combustion, air flow, fuel systems, etc. Has over 400 pictures, illustrations and graphs.

Braided Stainless Fuel Inlet Lines Demon float bowls use special 9/16” x 24 TPI inlet fittings. Here are the most popular fuel line kits with this special fitting. Part No.

Description

BGG140006 .................................. 9/16”-24 Fits Demon Carburetors (8 Braided Inlet Kit) BGG140039 .................................. 9/16”-24 Fits Demon Carburetors (6AN or 3/8” Hose)

Feeler Gauges Valuable tools to have around the shop or trailer. Use in engine assembly to check connecting rod side clearance, piston ring end gap, spark plug gap and valve lash. Gauges have Metric and SAE sizing designations etched in each blade. Choose straight or angled sets. Part No.

Description

ALL96420..............Standard ALL96421..............An