Bellhousing Bert, Brinn, Lakewood, McLeod, Quartermaster, Quick-Time, Tilton LAKEWOOD STEEL BELLHOUSING For use when a steel bellhousing is required; 1/4” thick. Block plate not included, starter bolts directly to housing. 302, 351W, 351C Not SFI approved, but IMCA legal.
BER/7F Coupler........................$72.99 For a Bert or a Brinn transmission with a Ford flexplate. (Requires socket head bolts)
FLYWHEEL BOLT KITS 7/16-20 SOCKET HEAD- Set of 6 FAS/23855 1” long. For clutches without a spacer FAS/23856 1 1/4” long. For clutches with a spacer FAS/23857 1 1/2” long. For Bert coupler with a spacer
$6.99 $6.99 $6.99
PILOT BUSHINGS LWI/77200 for Ford transsions LWI/77205 adapts Bert, Brinn, or Chevy transmissions to Ford block
$277.99 $299.99
THROWOUT FORK
NUP/DOTZ7515A $19.99 (Requires stock retainer clip form a 1979 and older Ford bellhousing.) HOW/8288 Hydraulic throwout bearing $119.99 (Requires bearing retainer to be turned down to Chevy dimensions.) TNH/106 1/4” clutch spacer for use with motor plate $29.99 TNH/102 Bearing retainer adapter sleeve $29.99 Centers up bearing retainer of Bert, Brinn or Chevy tran to a Ford bell housing
OEM Flexplates- Can also be used with triple disc clutches 157 Tooth Neutral NUP/AF424
157 Tooth 28 oz. $35.99
PIO/PB50H Extra long pilot bushing for Ford transmissions TRA/5005 Pilot bushing for Chevy transmissions TMI/PB-1 Special bushing for Ford crankshaft/Chevy
transmission/ Extra long.
$9.99 $12.99 $19.99
The clutches listed below use an automatic flexplate. Note; when used along with a motorplate, the clutch may need to be spaced back to allow the input shaft of the transmission to engage all three discs.
RAM ASSAULT WEAPON TRIPLE DISC CLUTCH
RAM/9355S 302-351 RAM/9955 Replacement disc (each) RAM/497 Release bearing for stock throw out arms
164 tooth Neutral
164 Tooth 28 oz.
$592.62 $98.90 $64.99
164 tooth 50 oz.
NUP/AF414
$35.99
NUP/AF415
$35.99
NUP/AF483
$35.99
NUP/AF684
$40.00
SCA/302-1
$45.99
SCA/302-4
$47.99
SCA/302-2
$45.99
SCA/302-3
$45.99
Call for $$$
QTM/RM951 ***
SFI Flywheels Light Weight Flywheels 2.1-2.8 lbs. QTM/RM952
Call for $$$
QTM/RM950
Call for $$$
***Ford Center with Chevy 153 tooth lightweight ring gear
FLYWHEELS
Steel manual flywheel, 157 tooth for 10” clutch. Use with steel bell housings with dual starter mounting patterns (use the inner pattern) or with factory 157 tooth bell housings. Will not work with the large 164 tooth housings. RPM/FPH302 $159.99 RPM/FPH302-28 $159.99 RPM/FPH302-50 $159.99
www.tmeyerinc.com 507-238-4141
27