2023 Titus T-type Hinge PushOpen Solutions - catalogue 01.1 ENG by Titus Group

Titus Group Technical Catalogue

2023

T-type Hinge PushOpen Solutions

Technical information

While every effort has been made in the production of this catalogue to ensure the accuracy of information, our products are continually being revised and users should confirm the up to date specification before ordering. Due to constant improvement of products presented in the catalogue, we can make changes at any time and without notice.

Responsibility

It is the responsibility of the user to ensure the fitness of hardware for the intended purpose. We recommend assessment by appropriate testing in the application and by technical enquiry to our representatives.

Intellectual property

Titus Group owns the intellectual property rights in its products worldwide whether as trademarks, patents, intellectual, copyright, designs, illustrations, drawings and the ‘know how’ contained in their design and production. Titus Group respects the equivalent rights in competitors and all other relevant product design rights. To our knowledge our products do not infringe any intellectual property rights of competitors or other parties. Titus Group takes infringements of its rights seriously and will rigorously defend these rights to the full extent of the law.

*Non preferred articles

All Item numbers in the catalogue marked with * are for non preferred items available on extended delivery times.

Trademarks

Titus and Titusonic are registered trademarks of Titus International Ltd. Lama is a registered trademark of Titus d.o.o. Dekani, WoodWelding is a registered trademark of WW SA.

1.3 Important

Information

T-type Hinges

T-type PressTo

Quick and easy tool-less mounting and reliable door attachment

· Effortless snap-on locking

· Closing action with an audible click when pressed to lock

· Expanding sleeve on the cup spreads and engages into the wood material creating a secure joint

Rigidity

· Rigid hinge-to-plate attachment assures door stability

· Tight hinge-to-plate joint improves hinge stability and reduces door sag

· Smooth performance

1.4

Highly tolerant

· Efficient performance in edge value of tolerances

· Reliable door closing in case of accidental misalignment

· ConfidentClose assured

Easy door installation even in cases of 3-5 hinges per door

Easy door installation even in cases of 4-5 hinges per door

· Easy and quick assembly and disassembly

Highly tolerant

Adjustable damping

· Consistent performance on doors of different dimensions and weights

· Intuitive adjustment

Reliable door closing in ca se of accide ntal mis alignme nt ‘Conﬁde ntClose’ a s sure d Ef ﬁcie nt pe r for mance in ma rginal value s of tole rance s

Rigidity

1.5

T-type Hinges

Door Overlay

How to Achieve the Desired Door Overlay?

By choosing the hinge of appropriate cranking

Concealed hinges with specific hinge arms are available for different door overlays. The most common overlays are:

Cabinet side Door

1. Full overlay Use a hinge with 0mm cranking

3. Inset door Use a hinge with 15mm or 17mm cranking

By choosing the mounting plates of appropriate thickness

To achieve the desired overlay (x) while using a determined drilling distance (K), a mounting plate of appropriate

2. Partial overlay for double doors Use a hinge with 5mm or 9mm cranking

By choosing the appropriate drilling distance K

To achieve the desired door overlay (x) while using a determined mounting plate thickness (D), an appropriate drilling distance K must be chosen.

thickness (D) must be chosen from the enclosed table or calculated with given formula.

1.6

SAMPLE SAMPLE

x 4 5 6 7 8 9 K 3 3 2 1 0 4 3 2 1 0 5 3 2 1 0 D D=4+K-x x 4 5 6 7 8 9 D 0 3 4 5 1 3 4 5 2 3 4 5 3 3 4 5 K D x K D x K

Through side adjustment

Side adjustment is made by rotating the appropriate screw on the hinge arm.

Door clearance and gap

Door clearance (F≥Fmin) and gap (Z) represent the minimal necessary space needed for the correct opening and closing of the door. The minimal required values depend on the cup drilling distance (K), door thickness (V)

and the type of hinge. The minimum clearance scale can be found on product pages > see Door clearance chart. When using hinges with partial overlay the door clearance must be twice as large (F≥2Fmin).

SAMPLE

T-type Hinges 1.7

V 16 17 18 19 20 21 22 K 3 0.3 0.5 0.7 1.0 1.3 1.7 2.5 4 0.3 0.5 0.7 0.9 1.2 1.6 2.1 5 0.3 0.5 0.7 0.9 1.2 1.5 2.0 FMIN Gap ZMIN=0 Z V K F

T-type Hinges

Hinge Cup Types

How to Mount the Hinge on the Door?

There are cup type symbols listed on product pages beside item numbers. Below you can find their explanation.

No pre-mounting

The hinge is fixed on the door with two screws. 3mm pilot holes recommended.

PressTo tool-less mounting

The hinge is inserted into cup hole and installed without tools

EasyFix

Quarter turn fixing for 8mm holes (interaxis 45/9.5) or 10mm holes (interaxis 48/6 and 52/5.5).

1.8

90º

How to Mount the Hinge on the Door?

Machine insertion ready hinge cup

Pre-mounted dowels suitable for machine insertion into 8mm holes (interaxis 45/9.5) or 10mm holes (interaxis 48/6 and 52/5.5)

FastFix

Pre-mounted expanding dowels with triple-start screw for fast fixing, suitable for 8mm holes.

T-type Hinges 1.9

T-type Hinges

Drilling Details

Drilling Patterns for Hinge Cup

Interaxis

45mm, 48mm and 52mm* T-type

*Available on special request > see page 1.3 Interaxis is the distance between two holes center for fixing screws on the hinge cup. Hinge cup type

Ø4.5mm

1.10

Interaxis 45mm Interaxis 48mm Interaxis 52mm* Drilling

Drilling

Drilling pattern

pattern

Tool-less mounting 45 9.5 Ø 35 48 6 Ø 35 52 5.5 Ø 35 45 35 8 9.5 48 35 10 6 45 35 5 9.5 48 35 5 6 52 35 5 5.5 45 35 9.5 48 35 6 52 35 5.5 52 35 10 5.5 45 35 5 9.5

Screw-on ready Pre-mounted

screws Machine insertion ready FastFix EasyFix Pre-mounted euro screws

T-type Hinges

Mounting Plate Type

How to Fix the Mounting Plate on the Cabinet Side?

There are mounting plate type symbols listed on product pages beside item numbers. Below you can find their explanation.

Chipboard screw-on ready

Mounting plate is fixed with two chipboard screws or equivalent. 3mm pilot holes recommended.

Euro screw ready

Machine insertion ready

Fixing with 6.3mm euro screws into pre-drilled 5mm holes. To choose appropriate head and length for use with this mounting plate is recommended.

Pre-mounted dowels for machine insertion into pre-drilled holes.

Pre-mounted euro screws

Euro screws for 5mm holes are pre-mounted on the mounting plate. Available lengths: 11mm, 13mm and 15mm

Pre-mounted expanding dowels

Pre-mounted expanding dowels for 5mm holes. Available lengths: 7.5mm and 10.5mm

Pre-mounted

Ø4.5mm screws

Mounting plate is fixed with two pre-mounted chipboard screws. 3mm pilot holes recommended.

T-type Hinges 1.11

T-type Hinges

Hinge-to-plate

How to Assemble the Hinge and the Mounting Plate?

T-type

3Way snap-on

3Way snap-on mounting for intuitive hinge-to-plate assembly in three directions:

from the hinge arm front from the hinge arm rear from the top front assembly rear assembly

top assembly

disassembly: for disassembly pull rear lever on the hinge arm.

1.12

Mounting

T-type Hinges Loadings

How Many Hinges per Door?

Check the enclosed recommendation for the number of recommended hinges per door by considering door height and weight.

Recommendation:

Use the appropriate number of hinges, not exceeding door height and weight as shown below.

Concealed hinges with Ø 35mm hinge cup diameter

Standard hinges

· Hinges with integrated damping

Hinges with integrated damping can be combined with non-damped hinges from standard hinge range. A trial mounting is always recommended.

T-type Hinges 1.13

height (cm) weight (kg)

T-type T-type-i height (cm) weight (kg) 2 3 4 5 2-8 8-15 13-20 17-25 50 100 150 200 250 2 3 4 5 2-8 8-15 13-20 17-25 50 100 150 200 250

T-type Hinges Adjustment

Side Adjustment

By rotating the adjustment screw

· T-type

Side adjustment is made by rotating the

Adjustment range can be found on every product page.

Adjustment range

1.14

Side adjustment aligns the door with the side of the cabinet. screw on the hinge arm.

Height Adjustment

By rotating the cam adjuster

T-type with cam adjustable cruciform mounting plate

Height adjustment is necessary to achieve optimal vertical door position.

Height adjustment is made by rotating the cam adjuster on the mounting plate.

By releasing the fixing screws

T-type, with cruciform mounting plate

For height adjustment the two mounting plate fixing screws have to be temporarily released while making the manual adjustment.

Hinges 1.15 +2 +2 -2 -2 +2 +2 -2 -2 -2 -2 +2 +2 +2 +2 -2 -2 +2 -2

T-type

T-type Hinges Adjustment

Depth Adjustment

By rotating the cam adjuster

T-type

The system enables easy adjustment of the gap between door and cabinet.

Rotate the cam adjuster on the hinge arm.

Adjustment range

+4/-1+4/-1

1.16 -2 +2 +4/-1 -2 +2 +4/-1

T-type Hinges Damping Adjustment

Damping Adjustment

T-type-i

The damping action can be adjusted to fit different door weights and sizes which enables optimal door functioning.

Damping is factory pre-set to the medium damping value. Turn towards longer bar to increase and shorter bar to decrease the damping.

Hinges 1.17

T-type

T-type Hinges

Key Design Choices

ConfidentClose

The hinge is designed to provide consumer preferred way of soft closing action.

Based on results of Titus researches made in UK, Germany and Slovenia

One-for-all efficiency principle

Damping on the hinge cup

Damper, positioned transversal to the hinge cup allows for easy introduction of hinge versions

Damped and non-damped version on one mounting plate platform

Adjustable damping

Flexibility to tune performance for all applications

Consistent performance over a wide range of doors of different sizes and weights

· Easy accessible adjustment button for intuitive and quick adjustment

Efficient damping at any closing speed Reliable closing Damping force consistency

1.18

Titus Damper Inside Adjustable damping zone and force Fast closing Late start of deceleration action Quiet landing with SoftTouch

1.19

T-type Hinges

T-type Hinges Product Guide

1.20

Cranking Opening angle Cup type Page

T-type-i 110 0mm 110° for wood door 1.22 5mm 110° for wood door 1.22 9mm 110° for wood door 1.24 17mm 110° for wood door 1.24 T-type-i 110/15° 15°, 9mm 110° for wood door 1.26 T-type-i 110/30° 30 °, 9mm 110° for wood door 1.28 T-type-i 110/45° 45°, 9mm 110° for wood door 1.30 45°, 17mm 110° for wood door 1.32 45° , 23 mm 110° for wood door 1.34 T-type-i 110/90° for blind corner 90 °, 17mm 110° for wood door 1.36 T-type-i 120 0mm 120° for wood door 1.38 T-type-i 95 0mm 95° for wood door 1.40 5mm 95° for wood door 1.40 9mm 95° for wood door 1.42 17mm 95° for wood door 1.42 T-type-i 170 0mm 170° for wood door 1.44 5mm 170° for wood door 1.46 9mm 170° for wood door 1.46 T-type 110 0mm 110° for wood door 1.48 5mm 110° for wood door 1.48 9mm 110° for wood door 1.50 17mm 110° for wood door 1.50 T-type 110/15° 15°, 9mm 110° for wood door 1.52 T-type 110/30° 30 °, 9mm 110° for wood door 1.54 T-type 110/45° 45°, 9mm 110° for wood door 1.56 45°, 17mm 110° for wood door 1.58 T-type 110/90° for blind corner 90 °, 17mm 110° for wood door 1.60

T-type

PushOpen Solutions

Hinges 1.21 Cranking Opening angle Cup type Page

T-type

T-type 120 0mm 120° for wood door 1.62 T-type 95 0mm 95° for wood door 1.64 5mm 95° for wood door 1.64 9mm 95° for wood door 1.66 17mm 95° for wood door 1.66 T-type 110 PushOpen Hinge 0mm 110° for wood door 1.68 5mm 110° for wood door 1.68 9mm 110° for wood door 1.70 T-type 170 0mm 170° for wood door 1.72 5mm 170° for wood door 1.74 9mm 170° for wood door 1.74 T-type for pie-cut corner cabinet for wood door 1.76 T-type mounting plates 1.78 Accessories Hinge Angle Restrictor 1.82 Cover caps 1.84

Push Latch S2 1.88 Push Latch 1.90 PushOpen Short 1.92 PushOpen Long 1.94

T-type-i 110

Cranking 0mm

1.22 42.5 K 11 7 1 1 4 26.1 65.4 42.5 K 11 7 1 1 4 26.1 65.4

For wood doors Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number

701-0AT0-054 701-0AS0-054 701-0AT1-054 701-0AS1-054

Pcs Made of steel EasyFix 701-0AT4-054 701-0AS4-054 701-0AT6-054

hinge

701-0BT0-054 701-0BS0-054 701-0BT1-054 701-0BS1-054

Made of steel EasyFix 701-0BT4-054 701-0BS4-054 701-0BT6-054 Drilling patterns for hinge cups > see page 1.10 110° 45 9.5 Ø 35 48 6 Ø 35 4 16 7.5 Mounting plates Hinge cup screws If not pre-mounted Cam adjustable cruciform mounting plate

see page 1.78 Cruciform mounting plate

Cam

Face frame

Accessories Hinge angle restrictor > see page

Cover caps for hinge arm > see page 1.84 820-6328-050 10000 Pcs Legend of hinge cup symbols Screw-on ready < screws EasyFix system Machine insertion ready PressTo PressTo Opening angle 110˚ Drilling diameter for hinge cup 35mm Drilling depth D 12mm

depth D for PressTo

plate mounting system

snap-on PressTo Tool-less mounting

150

Drilling patterns for

cups > see page 1.10 Cranking 5mm

150 Pcs

> see page 1.80

adjustable linear mounting plate > see page 1.78

adapter plate > see page 1.80

1.82

Drilling

13mm Hinge on

3Way

Mounting details

Drawings show application on D=0mm mounting plate

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 1.6

Drawings show application on D=0mm mounting plate

T-type Hinges 1.23 37 37 X 13 14 15 16 17 18 19 K 3 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 D D=13+K-X X 8 9 10 11 12 13 14 K 3 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 D D=8+K-X 18.5 10.6 67.5 37 X Z F>Fmin S D V K Side adjustment +3/-1mm Height adjustment +2/-2mm Depth adjustment +4/-1mm For

further explanation > see pages 1.14-1.16

Door adjustment

Door clearance at

further explanation > see page 1.7 V 16 17 18 19 20 21 22 23 24 25 26 K 3 0.5 0.7 0.8 1 1.2 1.5 1.7 2.1 2.8 4.1 5.5 4 0.4 0.7 0.8 1 1.2 1.5 1.7 2.1 2.3 3.1 4.5 5 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 3.5 6 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 2.9 FMIN Gap ZMIN=0 For further explanation > see page 1.17 Damping adjustment Push opening PushOpen Solutions > see pages 1.88-1.95 15.6 V K 23.5 S 67.5 37 Z X F>Fmin D

R=1mm For

T-type-i 110

1.24 42.5 K 11 7 1 1 4 26.1 65.4 42.5 K 11 7 1 1 4 26.1 65.4

For wood doors Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number

701-0CT0-054 701-0CS0-054 701-0CT1-054 701-0CS1-054 150 Pcs Made of steel EasyFix 701-0CT4-054 701-0CS4-054 701-0CT6-054

hinge

Cranking

701-0DT0-054 701-0DS0-054 701-0DT1-054 701-0DS1-054

Pcs Made of steel EasyFix 701-0DT4-054 701-0DS4-054 701-0DT6-054 Drilling patterns for hinge cups > see page 1.10 110° 45 9.5 Ø 35 48 6 Ø 35 4 16 7.5 Mounting plates Hinge cup screws If not pre-mounted Cam adjustable cruciform mounting plate

see page 1.78 Cruciform mounting plate

Cam adjustable linear mounting

Face frame adapter

Accessories Hinge angle restrictor > see page

Cover caps for hinge arm > see page 1.84 820-6328-050 10000 Pcs Legend of hinge cup symbols Screw-on ready < screws EasyFix system Machine insertion ready Opening angle 110˚ Drilling diameter for hinge cup 35mm Drilling depth D 12mm

depth D for PressTo

on plate mounting system

snap-on PressTo Tool-less mounting PressTo PressTo

Cranking 9mm

Drilling patterns for

cups > see page 1.10

17mm

150

> see page 1.80

plate > see page 1.78

plate > see page 1.80

1.82

Drilling

13mm Hinge

3Way

Mounting details

Drawings show application on D=0mm mounting plate

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 1.6

Drawings show application on D=2mm mounting plate

T-type Hinges 1.25 37 37+V X 4 5 6 7 8 9 10 K 3 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 D D=4+K-X V 16 17 18 19 20 21 22 23 24 K 3 0 0 0 0 1 1 1 1 2 4 1 1 1 1 2 2 2 2 3 5 2 2 2 2 3 3 3 3 4 6 3 3 3 3 4 4 4 4 D D= -4+K+F Side adjustment +3/-1mm Height adjustment +2/-2mm Depth adjustment +4/-1mm For further explanation

1.14-1.16

> see pages

Door adjustment

Door clearance at

For further explanation > see page 1.7 V 16 17 18 19 20 21 22 23 24 25 26 K 3 0.5 0.7 0.8 1 1.2 1.5 1.7 2.1 2.8 4.1 5.5 4 0.4 0.7 0.8 1 1.2 1.5 1.7 2.1 2.3 3.1 4.5 5 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 3.5 6 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 2.9 FMIN Gap ZMIN=0 For further explanation > see page 1.17 Damping adjustment Push opening PushOpen Solutions > see pages 1.88-1.95 Z Z 27.5 19.6 67.5 37 X F>2Fmin S D V K 29.6 V K 37.5 S 68.5 37 F>Fmin D

R=1mm

T-type-i 110/15°

15° angled application for wood doors

· Opening angle 110˚

· Drilling diameter for hinge cup 35mm

· Drilling depth 12mm

· Hinge on plate mounting system 3Way snap-on

Drilling patterns for hinge cups > see page 1.10 100 Pcs Cup made of steel, arm made of zinc

Mounting plates

Cam adjustable cruciform mounting plate > see page 1.78

Cruciform mounting plate > see page 1.80

Cam adjustable linear mounting plate > see page 1.78 Face

1.26 42.5 K 11 7 1 1 4 26.1 65.4

Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number

701-0D64-650 701-0D66-650 701-0D70-650

EasyFix 701-0D76-650 701-0D78-650

110°

Cranking 9mm

701-0D72-650

45 9.5 Ø 35 48 6 Ø 35 4

16 7.5

Hinge cup screws If not pre-mounted

adapter

Accessories Hinge angle restrictor

see page

Cover caps for hinge arm > see page 1.84 820-6328-050 10000 Pcs Legend of hinge cup symbols Screw-on ready < screws EasyFix system Machine insertion ready

frame

plate > see page 1.80

1.82

Mounting details

Drawings show application on D=0mm mounting plate

L=45 for thickness D=0

L=44 for thickness D=1 L=43 for thickness D=2

L=42 for thickness D=3 L=41 for thickness D=4

For further explanation > see pages 1.14-1.16

Mounting plate thickness table For further explanation > see page 1.6

T-type Hinges 1.27 L 37 Side adjustment +3/-1mm Height adjustment +2/-2mm Depth adjustment +2.5/-2.5mm

Door adjustment

distance Door clearance at R=1mm For further explanation > see page 1.7 V 16 17 18 19 20 21 22 23 24 25 26 K 3 0.5 0.7 0.8 1 1.2 1.5 1.7 2.1 2.8 4.1 5.5 4 0.4 0.7 0.8 1 1.2 1.5 1.7 2.1 2.3 3.1 4.5 5 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 3.5 6 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 2.9 FMIN Gap ZMIN=0 For

Damping adjustment

Mounting plate drilling

further explanation > see page 1.17

P 11 12 13 14 15 16 17 18 K 3 4 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 D P 6 7 8 9 10 11 12 13 K 3 4 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 D Push opening PushOpen Solutions > see pages 1.88-1.95 27 14.2 67.6 37 P 15° K D S V 14.2 K 27 S 71.6 L P D K x 15° V

T-type-i 110/30°

30° angled application for wood doors

· Opening angle 110˚

· Drilling diameter for hinge cup 35mm

· Drilling depth 12mm

· Hinge on plate mounting system 3Way snap-on

Drilling patterns for hinge cups > see page 1.10 100 Pcs Cup made of steel, arm made of zinc

Cam adjustable cruciform mounting plate > see page 1.78

Cruciform mounting plate > see page 1.80

Cam adjustable linear mounting plate > see page 1.78

1.28 42.5 K 11 7 1 1 4 26.1 65.4

110° Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number

701-0E52-650 701-0E54-650 701-0E58-650 701-0E60-650 EasyFix 701-0E64-650 701-0E66-650

Cranking 9mm

45 9.5 Ø 35 48 6 Ø 35 4 16 7.5

Mounting plates Hinge cup screws If not pre-mounted

adapter

Accessories Hinge angle restrictor

see page

Cover caps for hinge arm > see page 1.84 820-6328-050 10000 Pcs Legend of hinge cup symbols Screw-on ready < screws EasyFix system Machine insertion ready

Face frame

plate > see page 1.80

1.82

For further explanation > see page 1.17

For further explanation > see pages 1.14-1.16

Mounting details

701-0957-054-00

Hinge T110 30° ID C9 45-9.5 SO

701-0957-054-00

Hinge T110 30° ID C9 45-9.5 SO

Drawing show application on D=0mm thick mounting plate

Drawings show application on D=0mm

Drawings show application on D=0mm mounting plate

Drawing show application on D=0mm thick mounting plate

L=41 for thickness D=0

L=41 for thickness D=1

L=40 for thickness D=2

L=41 for thickness D=0

L=40 for thickness D=2

L=41 for thickness D=0

L=40 for thickness D=3

L=41 for thickness D=0

L=40 for thickness D=3

L=41 for thickness D=1

L=39 for thickness D=4

L=41 for thickness D=1

Drawing show application on D=0mm thick mounting plate

L=39 for thickness D=4

L=40 for thickness D=2

L=40 for thickness D=3

L=39 for thickness D=4

Mounting plate drilling distance Door clearance at R=1mm

Mounting plate thickness table For further explanation > see page 1.6

L=39 for thickness D=4

T-type Hinges 1.29 L 37

Side adjustment +3/-1mm Height adjustment +2/-2mm Depth adjustment +2.5/-2.5mm

Door adjustment

Damping adjustment

mounting

X 2 3 4 5 6 7 8 9 K 3 4 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 D P 1.5 2.5 3.5 4.5 5.5 6.5 7.5 8.5 K 3 4 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 D Push

PushOpen

32.1 14.5 67.6 37 P 30° K D S V 14.2 K 27 S 71.6 L P D K x 30° V

plate

opening

Solutions > see pages 1.88-1.95

T-type-i 110/45°

45° angled application for wood doors

· Opening angle 110˚

· Drilling diameter for hinge cup 35mm

· Drilling depth 12mm

· Hinge on plate mounting system 3Way snap-on

Drilling patterns for hinge cups > see page 1.10 100 Pcs Cup made of steel, arm made of zinc

Mounting plates

cup screws If not pre-mounted Cam adjustable cruciform mounting plate > see page 1.78

Cruciform mounting plate > see page 1.80 Cam adjustable linear mounting plate > see page 1.78

1.30 42.5 K 11 7 1 1 4 26.1 65.4

110° Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number

701-0D82-650 701-0D84-650 701-0D88-650

EasyFix 701-0D98-650 701-0E32-650

Cranking 9mm

701-0D90-650

45 9.5 Ø 35 48 6 Ø 35 4 16 7.5

Hinge

adapter

Accessories Hinge angle restrictor

see page

Cover caps for hinge arm > see page 1.84 820-6328-050 10000 Pcs Legend of hinge cup symbols Screw-on ready < screws EasyFix system Machine insertion ready

Face frame

plate > see page 1.80

1.82

701-0933-054-00

Mounting details

701-0933-054-00

Drawings show application on D=0mm mounting plate

Drawing show application

Drawings show application on D=0mm mounting plate

Hinge T110 45° ID C9 45-9.5 SO on D=0mm thick mounting plate

Drawing show application

Hinge T110 45° ID C9 45-9.5 SO on D=0mm thick mounting plate

Drawing show application

Hinge T110 45° ID C9 45-9.5 SO on D=0mm thick mounting plate

plate

Mounting

T-type Hinges 1.31 L 37

25.1 3.7 67.6 37 P 45° K D S V V 3.7 25.1 S 79.6 L P D K x 45° Side adjustment +3/-1mm Height adjustment +2/-2mm Depth adjustment +2.5/-2.5mm For

1.14-1.16 Door adjustment

further explanation > see pages

page 1.6

plate thickness table For further explanation > see

L=49 for thickness D=0 L=48 for thickness D=1 L=47 for thickness D=2 L=46 for thickness D=3 L=45 for thickness D=4

distance X 10 11 12 13 14 15 16 17 K 3 4 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 D

1.7 V 16 17 18 19 20 21 22 23 24 25 26 K 3 0.5 0.7 0.8 1 1.2 1.5 1.7 2.1 2.8 4.1 5.5 4 0.4 0.7 0.8 1 1.2 1.5 1.7 2.1 2.3 3.1 4.5 5 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 3.5 6 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 2.9 FMIN Gap ZMIN=0 For further explanation > see page 1.17 Damping adjustment

Mounting

drilling

Door clearance at R=1mm For further explanation > see page

P 7 7.5 8 8.5 9 9.5 10 10.5 11 11.5 12 12.5 13 13.5 K 3 4 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0

Push opening PushOpen Solutions > see pages 1.88-1.95

T-type-i 110/45°

45° angled application for wood doors

· Opening angle

· Drilling diameter for hinge cup

· Drilling depth

· Hinge on plate mounting system 3Way

Drilling patterns for hinge cups > see page 1.10 100 Pcs Cup made of steel, arm made of zinc

Mounting plates

cup screws If not pre-mounted Cam adjustable cruciform mounting plate > see page 1.78

Cruciform mounting plate > see page 1.80

Cam adjustable linear mounting plate > see page 1.78

1.32 42.5 K 11 7 1 1 4 26.1 65.4

110° Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number

701-0B08-650 701-0B10-650 701-0C78-650 701-0C80-650 EasyFix 701-0C54-650 701-0C56-650

Cranking 17mm

110˚

35mm

12mm

45 9.5 Ø 35 48 6 Ø 35 4 16 7.5

snap-on

Hinge

adapter

Accessories Hinge angle restrictor

see page

Cover caps for hinge arm > see page 1.84 820-6328-050 10000 Pcs Legend of hinge cup symbols Screw-on ready < screws EasyFix system Machine insertion ready

Face frame

plate > see page 1.80

1.82

Mounting details

Drawings show application on D=0mm mounting plate

Mounting plate drilling distance

Mounting plate thickness table For

Drawings show application on D=0mm mounting plate L=45 for thickness D=0 L=44 for thickness D=1

Push opening

PushOpen Solutions > see pages 1.88-1.95

L=43 for thickness D=2

L=42 for thickness D=3 L=41 for thickness D=4

T-type Hinges 1.33 L 37 31.7 12.5 67.6 75.6 L P 45° K D S V V 12.5 31.7 S P D K x 45° Side adjustment +3/-1mm Height adjustment +2/-2mm Depth adjustment +2.5/-2.5mm

Door

For further explanation > see pages 1.14-1.16

adjustment

see page 1.6

further explanation >

X 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 6 K 3 2 1 0 4 2 1 0 5 3 2 1 0 6 4 3 2 1 0 D

Door clearance at R=1mm For

P 0 0.5 1 1.5 2 2.5 3 3.5 4 K 3 2 1 0 4 3 2 1 0 5 3 2 1 0 6 4 3 2 1 0 D

T-type-i 110/45°

45° angled application for wood doors

· Opening angle 110˚

· Drilling diameter for hinge cup 35mm

· Drilling depth 12mm

· Hinge on plate mounting system 3Way snap-on

Drilling patterns for hinge cups > see page 1.10 100 Pcs Cup made of steel, arm made of zinc

Mounting plates Hinge cup screws If not pre-mounted

Cam adjustable cruciform mounting plate > see page 1.78

Cruciform mounting plate > see page 1.80

Cam adjustable linear mounting plate > see page 1.78 Face

1.34 42.5 K 11 7 1 1 4 26.1 65.4

110° Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number

701-0W59-650 701-0W60-650 701-0W62-650 701-0W63-650 EasyFix 701-0W65-650 701-0W66-650

Cranking 23mm

45 9.5 Ø 35 48 6 Ø 35 4

16 7.5

Accessories Hinge angle restrictor

see page

Cover caps for hinge arm > see page 1.84 820-6328-050 10000

Legend of hinge cup symbols Screw-on ready < screws EasyFix system Machine insertion ready

frame adapter plate > see page 1.80

1.82

Pcs

Mounting details

Mounting plate drilling distance

Door adjustment

Mounting plate

T-type Hinges 1.35 37 P 45° K D V 38.5 17 67.5 Side adjustment +3/-1mm Height adjustment +2/-2mm Depth adjustment +2.5/-2.5mm

For further explanation > see pages 1.14-1.16

thickness table For further explanation > see page 1.6

Door clearance at R=1mm For further explanation > see page 1.7 V 16 17 18 19 20 21 22 23 24 25 26 K 3 0.5 0.7 0.8 1 1.2 1.5 1.7 2.1 2.8 4.1 5.5 4 0.4 0.7 0.8 1 1.2 1.5 1.7 2.1 2.3 3.1 4.5 5 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 3.5 6 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 2.9 FMIN Gap ZMIN=0 For further explanation > see page 1.17 Damping adjustment P 7.5 7 6.5 6 5.5 5 4.5 4 3.5 3 2.5 2 1.5 K 3 4 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0

Push opening PushOpen Solutions > see pages 1.88-1.95

T-type-i 110/90°

For wood door cabinets with blind panels

· Opening angle

Drilling patterns for hinge cups > see page 1.10

1.36 42.5 K 11 7 1 1 4 26.1 65.4

110°

Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number

701-0A96-650 701-0A98-650 701-0D36-650 701-0D38-650 EasyFix 701-0D30-650 701-0D32-650

Cranking 17mm

steel, arm made of zinc

100 Pcs Cup made of

110˚

· Drilling diameter for hinge cup 35mm

· Drilling depth 12mm

45 9.5 Ø 35 48 6 Ø 35 4 16 7.5

· Hinge on plate mounting system 3Way snap-on

Mounting plates Hinge cup screws If not pre-mounted Cam adjustable cruciform mounting plate > see page 1.78

Face frame adapter

Accessories Hinge angle restrictor > see page 1.82 Cover caps for hinge arm > see page 1.84 820-6328-050 10000 Pcs Legend of hinge cup symbols Screw-on ready < screws EasyFix system Machine insertion ready

Cruciform mounting plate > see page 1.80 Cam adjustable linear mounting plate > see page 1.78

plate > see page 1.80

Mounting details

Drawing shows application on D=2mm mounting plate

Mounting plate drilling distance

T-type Hinges 1.37 21.5 52 V 21 F K Side adjustment +2.5/-2.5mm Height adjustment +2/-2mm Depth adjustment +3/-1mm For further

1.14-1.16

explanation > see pages

Door adjustment

Door clearance at R=1mm For further explanation > see page 1.7 V 16 17 18 19 20 21 22 23 24 25 26 K 3 0.5 0.7 0.8 1 1.2 1.5 1.7 2.1 2.8 4.1 5.5 4 0.4 0.7 0.8 1 1.2 1.5 1.7 2.1 2.3 3.1 4.5 5 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 3.5 6 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 2.9 FMIN Gap ZMIN=0 For further explanation > see page 1.17 Damping adjustment Push opening PushOpen Solutions > see pages 1.88-1.95 F

T-type-i 120

Cam adjustable cruciform mounting plate

> see page 1.78

Cruciform mounting plate

> see page 1.80

Cam adjustable linear mounting plate > see page 1.78 Face

701-0UT4-054

Drilling patterns for hinge cups > see page 1.10

1.38 42.5 K 11 9 1 1 4 26.1 65.4

For wood doors Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number

701-0UT0-054

EasyFix

150

120°

angle 120˚

diameter

hinge

35mm

depth 12mm

plate mounting system 3Way snap-on 45 9.5 Ø 35 48 6 Ø 35 4 16 7.5

Cranking 0mm

701-0US0-054 701-0UT1-054 701-0US1-054

701-0US4-054

Pcs Made of steel

· Opening

· Drilling

for

cup

· Drilling

· Hinge on

Mounting plates Hinge cup screws If not pre-mounted

Accessories Cover caps for hinge arm

820-6328-050 10000 Pcs Legend of hinge cup symbols Screw-on ready < screws EasyFix system Machine insertion ready

frame adapter plate > see page 1.80

> see page 1.84

Mounting details Mounting plate thickness table

Drawings show application on D=0mm mounting plate

T-type Hinges 1.39 18.5 S 10.1 V K D F>Fmin Z 37 67.5 X 37 Side adjustment +3/-1mm Height adjustment +2/-2mm Depth adjustment +4/-1mm For

further explanation > see pages 1.14-1.16

For further explanation > see page 1.6 Door adjustment X 13 14 15 16 17 18 19 K 3 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 D D=13+K-X

Door

For further

> see page 1.7 V 16 17 18 19 K 3 1.1 0.4 0 0 4 2 1.4 0.7 0.1 5 3 2.3 1.6 1 FMIN Gap ZMIN =2

For further explanation > see page 1.17 Damping adjustment Push opening PushOpen

> see pages 1.88-1.95

clearance at R=1mm

explanation

Mounting plate drilling distance

Solutions

T-type-i 95 Thick Door Hinge

0mm

For wood doors

1.40 42.5 K 11 9 1 1 4 26.1 66.0 42.5 K 11 9 1 1 4 26.1 66.0 42.5 K 11 9 1 1 4 26.1 66.0

Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number

708-0XS1-054 150 Pcs

EasyFix 708-0XT4-054 708-0XS4-054 Drilling patterns for hinge cups

see page 1.10 Cranking

708-0YS0-054

EasyFix

708-0YS4-054 Drilling patterns for hinge cups > see page 1.10 95°

Opening angle 95˚ · Drilling diameter for hinge cup 35mm · Drilling depth 12mm · Hinge on plate mounting system 3Way snap-on 45 9.5 Ø 35 48 6 Ø 35 4 16 7.5 Mounting

Hinge

Face frame adapter plate

Accessories PushOpen Solutions > see pages 1.88-1.95 Cover caps for hinge arm > see page 1.84 820-6328-050 10000 Pcs Legend of hinge cup symbols Screw-on ready < screws EasyFix system Machine insertion ready Push opening

Cranking

708-0XT0-054 708-0XS0-054 708-0XT1-054

Made of steel

5mm 708-0YT0-054

708-0YT1-054 708-0YS1-054 150 Pcs Made of steel

708-0YT4-054

plates

cup screws

not pre-mounted Cam adjustable cruciform mounting plate > see page 1.78 Cruciform mounting plate > see page 1.80 Cam adjustable linear mounting plate > see page 1.78

> see page 1.80

Mounting details

Drawings show application on D=0mm mounting plate

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 1.6

Drawings show application on D=0mm mounting plate

T-type Hinges 1.41 37 Side adjustment +3/-1mm Height adjustment +2/-2mm Depth adjustment +4/-1mm

Door adjustment

X 8 9 10 11 12 13 14 15 16 17 K 3 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 7 4 3 2 1 0 8 4 3 2 1 0 9 4 3 2 1 0 D D=8+K-X X 13 14 15 16 17 18 19 20 21 22 K 3 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 7 4 3 2 1 0 8 4 3 2 1 0 9 4 3 2 1 0 D D=13+K-X Damping

37 For further explanation > see page 1.17 For further explanation > see pages 1.14-1.16

clearance at R=1mm

further explanation > see page 1.7 V 20 22 24 26 28 30 32 34 K 3 0.6 0.9 1.3 1.7 2.2 4.0 5.9 7.8 4 0.6 0.9 1.2 1.7 2.2 3.4 5.2 7.1 5 0.6 0.9 1.2 1.6 2.1 2.9 4.6 6.5 6 0.6 0.9 1.2 1.5 2.1 2.6 4.1 5.9 7 0.6 0.9 1.2 1.5 2.1 2.6 3.6 5.3 8 0.6 0.8 1.2 1.5 2.0 2.5 3.2 4.8 9 0.6 0.8 1.2 1.5 2.0 2.5 3.1 4.4 FMIN 18.5 23.5 67.5 67.5 37 37 11 16 D D S S X X F>Fmin F>Fmin Z Z K K V V

34 K 3 0 0 0 0 0 0 0 0

0 0 0 0 0 0 0 0

adjustment

Door

For

Gap Z

20 22 24 26 28 30 32

0 0 0 0 0 0 0 0

0 0 0 0 0 0 0 0 9 0 0 1.6 1.7 1.8 2.0 2.1 2.3 ZMIN

T-type-i 95 Thick Door Hinge

Cranking 9mm

708-0ZT0-054 708-0ZS0-054

708-0ZT1-054

708-0WT0-054 708-0WS0-054

708-0WT1-054

1.42 42.5 K 11 9 1 1 4 26.1 66.0 42.5 K 11 9 1 1 4 26.1 66.0

Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number

For wood doors

EasyFix

708-0ZS4-054 Drilling patterns

hinge

708-0ZS1-054 150 Pcs Made of steel

708-0ZT4-054

for

cups > see page 1.10 Cranking 17mm

EasyFix

708-0WS1-054 150 Pcs Made of steel

Drilling patterns for hinge cups > see page 1.10 95°

Opening angle 95˚ · Drilling diameter for hinge cup 35mm · Drilling depth 12mm · Hinge on plate mounting system 3Way snap-on 45 9.5 Ø 35 48 6 Ø 35 4 16 7.5 Mounting

Hinge cup screws If

pre-mounted Cam adjustable cruciform

frame adapter plate

708-0WT4-054 708-0WS4-054

plates

not

mounting plate > see page 1.78 Cruciform mounting plate > see page 1.80 Cam adjustable linear mounting plate > see page 1.78 Face

> see page 1.80

Mounting details

Drawings show application on D=0mm mounting plate

Damping adjustment

adjustment

Drawings show application on D=2mm mounting plate

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 1.6

T-type Hinges 1.43 Side adjustment +3/-1mm Height adjustment +2/-2mm Depth adjustment +4/-1mm

Door

V 20 22 24 26 28 30 32 K 3 0 0 1 1 2 3 4* 4 1 1 2 2 3 4 4* 5 2 2 3 3 4 4 4* 6 3 3 4 4 4* 4* 7 4 4 4* 4* 4* 4* D D=-4+K+F *Hinge adjustment needed X 4 5 6 7 8 9 10 11 12 13 K 3 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 7 4 3 2 1 0 8 4 3 2 1 0 9 4 3 2 1 0 D

D=4+K-X X

V 20 22 24 26 28 30 32 34 K 3 0 0 0 0 0 0 0 0 4 0 0 0 0 0 0 0 0 5 0 0 0 0 0 0 0 0 6 0 0 0 0 0 0 0 0 7 0 0 0 0 0 0 0 0 8 0 0 0 0 0 0 0 0 9 0 0 1.6 1.7 1.8 2.0 2.1 2.3 ZMIN For further explanation > see page 1.17 For further explanation > see pages 1.14-1.16 Door clearance at R=1mm For further explanation > see page 1.7 V 20 22 24 26 28 30 32 34 K 3 0.6 0.9 1.3 1.7 2.2 4.0 5.9 7.8 4 0.6 0.9 1.2 1.7 2.2 3.4 5.2 7.1 5 0.6 0.9 1.2 1.6 2.1 2.9 4.6 6.5 6 0.6 0.9 1.2 1.5 2.1 2.6 4.1 5.9 7 0.6 0.9 1.2 1.5 2.1 2.6 3.6 5.3 8 0.6 0.8 1.2 1.5 2.0 2.5 3.2 4.8 9 0.6 0.8 1.2 1.5 2.0 2.5 3.1 4.4 FMIN Z Z 27.5 37.5 67.5 68.5 37 37 37 37+V 20 30 D D S S X F>2Fmin F>Fmin V V K K

Gap Z

Gap

T-type-i 170

Cruciform mounting plate

> see page 1.80

1.44

Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number Cranking 0mm 701-0ET0-054 701-0ES0-054 701-0ET1-054 701-0ES1-054 EasyFix

701-0ES4-054

patterns for hinge

see page

Made of steel and zinc 170°

Opening angle 165˚

Drilling diameter for hinge cup 35mm

Drilling depth 12mm · Hinge on plate mounting system 3Way snap-on For wood doors 45 9.5 Ø 35 48 6 Ø 35 64 11 5 2 5 37,4 K 4 16 7.5

Hinge

701-0ET4-054

Drilling

cups >

1.10

Pcs

Mounting plates

cup screws If not pre-mounted

Cam adjustable cruciform mounting plate

> see page 1.78

Face frame adapter plate

Accessories Hinge angle restrictor > see page 1.82 820-6328-050 10000 Pcs Legend of hinge cup symbols Screw-on ready < screws EasyFix system Machine insertion ready

Cam adjustable linear mounting plate > see page 1.78

> see page 1.80

Mounting details

Mounting plate drilling distance

Door adjustment

For further explanation > see pages 1.14-1.16

Mounting plate thickness table For further explanation > see page 1.6

Drawings show application on D=0mm mounting plate

No door protrusion in 90° position Door clearance at R=1mm For further explanation > see page

Soft closing systems

Glissando CR > see page 2.195 in Furniture Fitting Systems catalogue

Push opening

PushOpen Solutions > see pages 1.88-1.95

C value with D=0 mounting plates

T-type Hinges 1.45 37 Side adjustment +3/-1mm Height adjustment +2/-2mm Depth adjustment +4/-1mm

X 13 14 15 16 17 18 19 20 K 3 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 7 4 3 2 1 0 D

D=13+K-X

V 16 17 18 19 20 21 22 23 24 K 3 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 4 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 5 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 6 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 2.6 7 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 5.1 FMIN Gap ZMIN=0.5

1.7

K 3 4 5 6 7 C -9.0 -8.1 -7.1 -6.1 -5.2 D C K -1.4 90 F>Fmin X 52 S D 37 67 V C K -1.4 90 F>Fmin X 52 S D 37 67 V

T-type-i 170

Cranking 5mm

50 Pcs Made of steel and zinc

50 Pcs Made of steel and zinc

> see page 1.78 Cruciform mounting plate > see page 1.80 Cam adjustable linear mounting plate > see page 1.78 Face frame adapter plate > see page 1.80

1.46

Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number

701-0FT0-054 701-0FS0-054 701-0FT1-054 701-0FS1-054

EasyFix 701-0FT4-054 701-0FS4-054

patterns for hinge cups > see page 1.10

701-0GT0-054 701-0GS0-054 701-0GT1-054 701-0GS1-054

Drilling

Cranking 9mm

EasyFix 701-0GT4-054 701-0GS4-054 Drilling

170°

Opening angle 165˚

Drilling diameter for hinge cup 35mm

Drilling depth 12mm

Hinge on plate mounting system 3Way snap-on For wood doors 45 9.5 Ø 35 48 6 Ø 35 64 11 5 2 5 37,4 K 64 11 5 2 5 37,4 K 4 16 7.5 Mounting plates Hinge cup screws If not pre-mounted Cam

plate

Accessories Hinge angle restrictor

820-6328-050 10000 Pcs Legend of hinge cup symbols Screw-on ready < screws EasyFix system Machine insertion ready

patterns for hinge cups > see page 1.10

adjustable cruciform mounting

> see page 1.82

Mounting details

Drawings show application on D=0mm mounting plate

Mounting plate drilling distance

Mounting plate thickness table

Drawings show application on D=0mm mounting plate

Drawing show application on D=0mm mounting plate

Soft closing systems

Glissando CR > see page 2.195 in Furniture Fitting Systems catalogue Push opening

T-type Hinges 1.47 37 V 67 F>2Fmin D 61 S V 67 70 S 79 S V 67 C K 7.6 F>Fmin 61 19 D x 37 67 19 90˚ X 1 2 3 4 5 6 7 8 9 10 11 K 3 6 3 2 1 0 4 6 3 2 1 0 5 6 3 2 1 0 6 6 3 2 1 0 7 6 3 2 1 0 D D=4+K-X X 8 9 10 11 12 13 14 K 3 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 D D=8+K-X Side adjustment +3/-1mm Height adjustment +2/-2mm Depth adjustment +4/-1mm For further

1.14-1.16

explanation > see pages

For further explanation > see page 1.6 Door

Door clearance at R=1mm For further explanation > see page 1.7 V 16 17 18 19 20 21 22 23 24 K 3 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 4 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 5 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 6 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 2.6 7 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 5.1 FMIN Gap ZMIN=0.5

adjustment

PushOpen Solutions

see pages 1.88-1.95 90 K C 3.6 57 S D F>Fmin X 67 V 37 90˚ K C 3.6 57 S D F>Fmin X 67 V 37 F>Fmin 37 X 90 7.6 67 61 S D V C K F>Fmin 37 X 90˚ 7.6 67 61 S D V C K

Cranking 0mm

1.48 37.4 62.1 K 3.2 11.7 37.4 62.1 K 3.2 11.7

For wood doors Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number

T-type 110

702-0AK0-054 702-0AL0-054

702-0AL1-054

EasyFix 702-0AK4-054 702-0AL4-054 Drilling patterns for hinge cups > see page 1.10

702-0BK0-054 702-0BL0-054 702-0BK1-054 702-0BL1-054

EasyFix 702-0BK4-054 702-0BL4-054 Drilling

hinge

110°

Opening angle 110˚

Drilling diameter for hinge cup 35mm

Drilling depth 12mm · Hinge on plate mounting system 3Way snap-on 45 9.5 Ø 35 48 6 Ø 35 4 16 7.5 Mounting plates Hinge cup screws If not pre-mounted Cam adjustable cruciform mounting plate

702-0AK1-054

150 Pcs Made of steel

Cranking 5mm

150 Pcs Made of steel

patterns for

cups > see page 1.10

> see page 1.78 Cruciform mounting plate > see page 1.80 Cam adjustable linear mounting plate > see page 1.78 Face frame adapter plate > see page 1.80

Mounting details

Drawings show application on D=0mm mounting plate

Drawings show application on D=0mm mounting plate Mounting plate drilling

Soft closing systems

Glissando TT > see page 2.189 in Furniture Fitting Systems catalogue

Glissando CR > see page 2.195 in Furniture Fitting Systems catalogue

Mounting plate thickness table For further explanation > see page 1.6 Door adjustment

For further explanation > see pages 1.14-1.16

T-type Hinges 1.49 37 37 Side adjustment +3/-1mm Height adjustment +2/-2mm Depth adjustment +4/-1mm

X 13 14 15 16 17 18 19 K 3 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 D D=13+K-X x 8 9 10 11 12 13 14 K 3 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 D D=8+K-X

Door clearance at R=1mm For further

V 16 17 18 19 20 21 22 23 24 25 26 K 3 0.5 0.7 0.8 1 1.2 1.5 1.7 2.1 2.8 4.1 5.5 4 0.4 0.7 0.8 1 1.2 1.5 1.7 2.1 2.3 3.1 4.5 5 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 3.5 6 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 2.9 FMIN Gap ZMIN=0

distance

explanation > see page 1.7

Push opening PushOpen Solutions > see

S V K D 67.5 37 X F>Fmin V K S 67.5 37 X S 18.5 V K 10.6 D 67.5 37 X F>Fmin V K S 23.5 15.6 67.5 37 X

pages 1.88-1.95

Cranking 9mm

1.50 37.4 62.1 K 3.2 11.7 37.4 62.1 K 3.2 11.7

For wood doors Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number

T-type 110

702-0CL0-054

702-0CK0-054

702-0CK1-054 702-0CL1-054

EasyFix 702-0CK4-054 702-0CL4-054

hinge

702-0DK0-054 702-0DL0-054 702-0DK1-054 702-0DL1-054

EasyFix 702-0DK4-054 702-0DL4-054

110°

Opening angle 110˚

Drilling diameter for hinge cup 35mm

Drilling depth 12mm · Hinge on plate mounting system 3Way snap-on 45 9.5 Ø 35 48 6 Ø 35 4 16 7.5 Mounting plates Hinge cup screws If not pre-mounted Cam adjustable cruciform mounting plate

Hinge angle restrictor

10000

Legend of hinge cup symbols Screw-on ready < screws EasyFix system Machine insertion ready Cover caps for hinge arm > see page 1.84

150 Pcs Made of steel

Drilling patterns for

cups > see page 1.10 Cranking 17mm

150 Pcs Made of steel

Drilling patterns for hinge cups > see page 1.10

> see page 1.78 Cruciform mounting plate > see page 1.80 Cam adjustable linear mounting plate > see page 1.78 Face frame adapter plate > see page 1.80

> see page 1.82 820-6328-050

Pcs

Mounting details

Drawings show application on D=0mm mounting plate

Mounting plate drilling distance

Drawings show application on D=2mm mounting plate

systems Glissando TT > see page 2.189 in Furniture Fitting Systems catalogue Glissando CR > see page 2.195 in Furniture Fitting Systems catalogue

For further explanation > see pages 1.14-1.16

Mounting plate thickness table For further explanation > see page 1.6

T-type Hinges 1.51 37 37+V Side adjustment +3/-1mm Height adjustment +2/-2mm Depth adjustment +4/-1mm

X 4 5 6 7 8 9 10 K 3 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 D D=4+K-X V 16 17 18 19 20 21 22 23 24 K 3 0 0 0 0 1 1 1 1 2 4 1 1 1 1 2 2 2 2 3 5 2 2 2 2 3 3 3 3 4 6 3 3 3 3 4 4 4 4 D

Door adjustment

D=-4+K+F

Door

see page 1.7 V 16 17 18 19 20 21 22 23 24 25 26 K 3 0.5 0.7 0.8 1 1.2 1.5 1.7 2.1 2.8 4.1 5.5 4 0.4 0.7 0.8 1 1.2 1.5 1.7 2.1 2.3 3.1 4.5 5 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 3.5 6 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 2.9 FMIN Gap ZMIN=0 Soft

Push opening PushOpen Solutions

V K S 27.5 19.6 D 67.5 37 X F>2Fmin V K S 37.5 D 68.6 37 F>Fmin V K S 27.5 19.6 D 67.5 37 X F>2Fmin V K S 37.5 29.6 D 68.6 37 F>Fmin

clearance at R=1mm For further explanation >

closing

> see pages 1.88-1.95

T-type 110/15°

15° angled application for wood doors

· Opening angle

· Drilling diameter for hinge cup

· Drilling depth 12mm

· Hinge on plate mounting system 3Way snap-on

Cranking 9mm

Drilling patterns for hinge cups > see page 1.10 100 Pcs Cup made of steel, arm made of zinc

Cruciform mounting plate > see page 1.80 Cam adjustable linear mounting plate > see page 1.78

1.52 37.4 62.1 K 3.2 11.7

110° Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number

702-0D63-650 702-0D65-650 702-0D69-650 702-0D71-650 EasyFix 702-0D75-650 702-0D77-650

110˚

35mm

45 9.5 Ø 35 48 6 Ø 35 4 16 7.5

Mounting plates Hinge cup screws If not pre-mounted Cam adjustable cruciform mounting plate > see page 1.78

Face frame adapter

plate > see page 1.80

Mounting details

further explanation > see pages 1.14-1.16

Mounting plate drilling distance Mounting plate thickness table

T-type Hinges 1.53 L 37 Side adjustment +3/-1mm Height adjustment +2/-2mm Depth adjustment +2.5/-2.5mm

For

Door adjustment

For further explanation > see page 1.6 Door clearance at R=1mm For further explanation > see page 1.7 V 16 17 18 19 20 21 22 23 24 25 26 K 3 0.5 0.7 0.8 1 1.2 1.5 1.7 2.1 2.8 4.1 5.5 4 0.4 0.7 0.8 1 1.2 1.5 1.7 2.1 2.3 3.1 4.5 5 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 3.5 6 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 2.9 FMIN Gap ZMIN=0 Soft closing

Glissando TT > see page 2.189 in Furniture Fitting Systems catalogue Push opening PushOpen Solutions > see pages 1.88-1.95 P 11 12 13 14 15 19 17 18 K 3 4 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 D X 6 7 8 9 10 11 12 13 K 3 4 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 D

L=40 for thickness

L=39 for thickness

L=38 for thickness

24 14.2 67.6 37 P 15° K D S V V 14.2 27 79.6 L P D S K x 15°

system

Drawings show application on D=0mm mounting plate Drawings show application on D=0mm mounting plate

D=0

D=1

D=2

D=3

D=4

T-type 110/30°

30° angled application for wood doors

· Opening angle

· Drilling diameter for hinge cup

· Drilling depth 12mm

· Hinge on plate mounting system 3Way snap-on

Drilling patterns for hinge cups > see page 1.10 100 Pcs Cup made of steel, arm made of zinc

Mounting plates Hinge cup screws If not pre-mounted Cam adjustable cruciform mounting plate > see page 1.78

Cruciform mounting plate > see page 1.80 Cam adjustable linear mounting plate > see page 1.78

1.54 37.4 62.1 K 3.2 11.7

Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number

702-0E51-650 702-0E53-650 702-0E57-650 702-0E59-650 EasyFix 702-0E63-650 702-0E65-650

110°

Cranking 9mm

110˚

35mm

45 9.5 Ø 35 48 6 Ø 35 4 16 7.5

Face frame adapter

Accessories Hinge angle restrictor > see page 1.82 Cover caps for hinge arm > see page 1.84 820-6328-050 10000 Pcs Legend

hinge cup symbols Screw-on ready < screws EasyFix system Machine insertion ready

plate > see page 1.80

701-0956-054-00

Hinge T110 30° SD C9 45-9.5 SO

701-0956-054-00

Mounting details

Hinge T110 30° SD C9 45-9.5 SO

Mounting plate drilling distance

Drawings show application on D=0mm mounting plate

Drawing show application on D=0mm thick mounting plate

Drawings show application on D=0mm mounting plate

Drawing show application on D=0mm thick mounting plate

L=41 for thickness D=0

L=41 for thickness D=1

L=40 for thickness D=2

For further explanation > see pages 1.14-1.16

Drawing show application on D=0mm thick mounting plate

L=41 for thickness D=0

L=40 for thickness D=3

L=41 for thickness D=0

L=40 for thickness D=3

L=41 for thickness D=1

L=39 for thickness D=4

L=41 for thickness D=1

L=39 for thickness D=4

L=40 for thickness D=2

L=40 for thickness D=3

L=39 for thickness D=4

L=40 for thickness D=3 L=39 for thickness D=4

T-type Hinges 1.55 L 37

Side adjustment +3/-1mm Height adjustment +2/-2mm Depth adjustment +2.5/-2.5mm

Door

adjustment

further explanation > see page 1.6

thickness D=0 L=41 for thickness D=1 L=40 for thickness D=2 L=40 for thickness D=3 L=39 for thickness D=4 Door clearance at

Mounting plate thickness table For

L=41 for

R=1mm

P 1.5 2.5 3.5 4.5 5.5 6.5 7.5 8.5 K 3 4 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 D P 2 3 4 5 6 7 8 9 K 3 4 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 D

Glissando

Push opening PushOpen Solutions > see pages

31.8 14.5 67.6 37 P 30° K D S V V 14.5 71.6 L P D S K x 30°

Soft closing system

TT > see page 2.189 in Furniture Fitting Systems catalogue

1.88-1.95

T-type 110/45°

45° angled application for wood doors

· Opening angle

· Drilling diameter for hinge cup

· Drilling depth 12mm

· Hinge on plate mounting system 3Way

Cranking 9mm

1.56 37.4 62.1 K 3.2 11.7

110° Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number

702-0D81-650 702-0D83-650 702-0D87-650 702-0D89-650 EasyFix 702-0D97-650 702-0E18-650

Drilling patterns for hinge cups > see page 1.10 100 Pcs Cup made of steel, arm made of zinc

110˚

35mm

45 9.5 Ø 35 48 6 Ø 35 4 16 7.5

Face frame adapter plate

snap-on

Mounting plates Hinge cup screws If not pre-mounted Cam adjustable cruciform mounting plate > see page 1.78 Cruciform mounting plate > see page 1.80 Cam adjustable linear mounting plate > see page 1.78

> see page 1.80

701-0932-054-00

Hinge T110 45° SD C9 45-9.5 SO

701-0932-054-00

Hinge T110 45° SD C9 45-9.5 SO

701-0932-054-00

Hinge T110 45° SD C9 45-9.5 SO

Mounting details

Hinge T110 45° SD C9 45-9.5 SO

Drawing show application on D=0 tick mounting plate

Drawings show application on D=0mm mounting plate

Drawing show application on D=0 tick mounting plate

Mounting plate drilling distance

Mounting plate thickness table For

Drawing show application on D=0 tick mounting plate

Drawings show application on D=0mm mounting plate

Drawing show application on D=0 tick mounting plate

Soft closing system

L=49 for thickness D=0

L=48 for thickness D=1

L=49 for thickness D=0

L=47 for thickness D=2

L=48 for thickness D=1

L=47 for thickness D=2

L=48 for thickness D=1

L=49 for thickness D=0

L=48 for thickness D=1

L=46 for thickness D=3

L=47 for thickness D=2

L=48 for thickness D=1

L=45 for thickness D=4

L=46 for thickness D=3

L=47 for thickness D=2

L=46 for thickness D=3

L=45 for thickness D=4

L=46 for thickness D=3

L=45 for thickness D=4

TT > see page 2.189 in Furniture Fitting Systems catalogue

T-type Hinges 1.57

L 37

Side adjustment +3/-1mm Height adjustment +2/-2mm Depth adjustment +2.5/-2.5mm

Door adjustment

For further explanation > see pages 1.14-1.16

1.6

further explanation > see page

Door clearance at R=1mm For further explanation > see page 1.7

X 10 11 12 13 14 15 16 17 K 3 4 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 D P 7 7.5 8 8.5 9 9.5 10 10.5 11 11.5 12 12.5 13 13.5 K 3 4 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0

Glissando

Push opening PushOpen Solutions

25 3.7 25 67.6 37 P K D S V V 3.7 79.6 L P D S K x 45° 45°

> see pages 1.88-1.95

T-type 110/45°

45° angled application for wood doors

· Opening angle

· Drilling diameter for hinge cup

· Drilling depth

Drilling patterns for hinge cups > see page 1.10 100 Pcs Cup made of steel, arm made of zinc

1.58 37.4 62.1 K 3.2 11.7

110° Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number

702-0B07-650 702-0B09-650 702-0C77-650 702-0C79-650 EasyFix 702-0C53-650 702-0C55-650

Cranking 17mm

110˚

35mm

12mm

45 9.5 Ø 35 48 6 Ø 35 4 16 7.5

Face frame adapter

· Hinge on plate mounting system 3Way snap-on

plate > see page 1.80

Mounting details

Drawings show application on D=0mm mounting plate

Mounting plate drilling distance

Drawings show application on D=0mm mounting plate

For further explanation > see pages 1.14-1.16

Mounting plate

T-type Hinges 1.59 L 37 Side adjustment +3/-1mm Height adjustment +2/-2mm Depth adjustment +2.5/-2.5mm

Door adjustment

D=0

D=4 X 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 6 K 3 2 1 0 4 2 1 0 5 3 2 1 0 6 4 3 2 1 0 D Door

thickness table For further explanation > see page 1.6 L=45 for thickness

L=44 for thickness D=1 L=43 for thickness D=2 L=42 for thickness D=3 L=41 for thickness

clearance at R=1mm For further explanation > see page

P 0 0.5 1 1.5 2 2.5 3 3.5 4 K 3 2 1 0 4 3 2 1 0 5 3 2 1 0 6 4 3 2 1 0 D

Glissando

> see page 2.189 in Furniture

Systems catalogue Push opening PushOpen

31.7 12.5 31.7 67.6 P K D S V V 12.5 75.6 L P D S K X 45° 45°

Soft closing system

Fitting

Solutions > see pages 1.88-1.95

T-type 110/90°

For wood door cabinets with blind panels

· Opening angle

· Drilling diameter for hinge cup

· Drilling depth 12mm

· Hinge on plate mounting system 3Way snap-on

Drilling patterns for hinge cups > see page 1.10

1.60 37.4 62.1 K 3.2 11.7

110°

Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number

702-0A95-650 702-0A97-650 702-0D35-650 702-0D37-650 EasyFix 702-0D29-650 702-0D31-650

Cranking 17mm

100

Pcs Cup made of steel, arm made of zinc

110˚

35mm

45 9.5 Ø 35 48 6 Ø 35 4 16 7.5

Face frame adapter plate

> see page 1.80

Mounting details

Drawing shows application on D=2mm mounting plate

further explanation > see pages 1.14-1.16 Door adjustment

Mounting

T-type Hinges 1.61 K 52 V 21 F 21.5 Side adjustment +3/-1mm Height adjustment +2/-2mm Depth adjustment +4/-1mm

For

clearance

plate drilling distance Door

at R=1mm

> see page 2.189 in Furniture

Systems catalogue

PushOpen

Soft closing system Glissando TT

Fitting

Push opening

Solutions > see pages 1.88-1.95

T-type 120 For wood doors

Cam adjustable cruciform mounting plate

> see page 1.78

Cruciform mounting plate

> see page 1.80

Cam adjustable linear mounting plate > see page 1.78 Face frame

1.62 37.4 K 3.2 11.9 62.1

Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number

702-0UK0-054 702-0UL0-054

702-0UL1-054 EasyFix

702-0UL4-054

150

Made of steel 120°

Opening angle 120˚ · Drilling diameter for hinge cup 35mm · Drilling depth 12mm ·

on plate mounting system 3Way snap-on 45 9.5 Ø 35 48 6 Ø 35 4 16 7.5

Cranking 0mm

702-0UK1-054

702-0UK4-054

Drilling patterns for hinge cups > see page 1.10

Pcs

Hinge

Mounting plates Hinge cup screws If not pre-mounted

Accessories Cover caps for hinge arm

page

820-6328-050 10000 Pcs Legend of hinge cup symbols Screw-on ready < screws EasyFix system Machine insertion ready

adapter plate > see page 1.80

> see

1.84

Mounting details

Drawings show application on D=0mm mounting plate

Glissando TT > see page 2.189 in Furniture Fitting Systems catalogue

Glissando CR > see page 2.195 in Furniture Fitting Systems catalogue

For further explanation > see pages 1.14-1.16

Mounting plate thickness table

further explanation > see page 1.6 Door adjustment

T-type Hinges 1.63 37 Side adjustment +3/-1mm Height adjustment +2/-2mm Depth adjustment +4/-1mm

14 15 16 17

19 K 3 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 D D=13+K-X

For

distance Door clearance

For further explanation > see page 1.7 V 16 17 18 19 K 3 1.1 0.4 0 0 4 2 1.4 0.7 0.1 5 3 2.3 1.6 1 FMIN Gap ZMIN

Mounting plate drilling

at R=1mm

=2 Soft closing systems

18.5 67.5 37 10.1 D S X F>Fmin K V Push opening PushOpen Solutions

> see pages 1.88-1.95

T-type 95 Thick Door Hinge

1.64 37.4 62.0 K 3.2 11.9 37.4 62.0 K 3.2 11.9

Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number

707-0XL0-054

707-0XL1-054

Pcs Made of steel EasyFix 707-0XK4-054 707-0XL4-054 Drilling patterns for hinge cups > see page 1.10 Cranking

707-0YL0-054

707-0YL1-054

EasyFix 707-0YK4-054 707-0YL4-054 Drilling patterns for hinge cups > see page 1.10 95° · Opening angle 95˚ · Drilling diameter for hinge cup 35mm · Drilling depth 12mm · Hinge on plate mounting system 3Way snap-on 45 9.5 Ø 35 48 6 Ø 35 PushOpen Solutions > see pages 1.88-1.95 4 16 7.5 Mounting plates Hinge cup screws If not pre-mounted Cam adjustable cruciform mounting plate > see page 1.78 Cruciform mounting plate > see page 1.80 Cam adjustable linear

plate

see page 1.78 Face frame adapter plate > see page 1.80 820-6328-050 10000 Pcs Legend of hinge cup symbols Screw-on ready < screws EasyFix system Machine insertion ready Soft closing systems Push opening Glissando CR > see page 2.199 in Furniture Fitting Systems catalogue Glissando TT > see page 2.199 in Furniture Fitting Systems catalogue Accessories Cover caps for hinge arm > see page 1.84

For wood doors

Cranking 0mm 707-0XK0-054

707-0XK1-054

150

5mm 707-0YK0-054

707-0YK1-054

150 Pcs Made of steel

mounting

Mounting details

Drawings show application on D=0mm mounting plate

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 1.6

Drawings show application on D=0mm mounting plate

T-type Hinges 1.65 Side adjustment +3/-1mm Height adjustment +2/-2mm Depth adjustment +4/-1mm

Door

adjustment

X 8 9 10 11 12 13 14 15 16 17 K 3 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 7 4 3 2 1 0 8 4 3 2 1 0 9 4 3 2 1 0 D D=8+K-X X 13 14 15 16 17 18 19 20 21 22 K 3 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 7 4 3 2 1 0 8 4 3 2 1 0 9 4 3 2 1 0 D D=13+K-X

Z F For further explanation > see pages 1.14-1.16

clearance

further explanation > see page 1.7 V 20 22 24 26 28 30 32 34 K 3 0.6 0.9 1.3 1.7 2.2 4.0 5.9 7.8 4 0.6 0.9 1.2 1.7 2.2 3.4 5.2 7.1 5 0.6 0.9 1.2 1.6 2.1 2.9 4.6 6.5 6 0.6 0.9 1.2 1.5 2.1 2.6 4.1 5.9 7 0.6 0.9 1.2 1.5 2.1 2.6 3.6 5.3 8 0.6 0.8 1.2 1.5 2.0 2.5 3.2 4.8 9 0.6 0.8 1.2 1.5 2.0 2.5 3.1 4.4 FMIN 37 37 18.5 23.5 67.5 67.5 37 37 11 16 D S S X X F>Fmin K K V V Gap Z V 20 22 24 26 28 30 32 34 K 3 0 0 0 0 0 0 0 0

0 0 0 0 0 0 0 0

0 0 0 0 0 0 0 0 9 0 0 1.6 1.7 1.8 2.0 2.1 2.3 ZMIN

Door

at R=1mm For

T-type 95 Thick Door Hinge

Cranking 9mm

707-0ZK0-054 707-0ZL0-054

707-0ZK1-054 707-0ZL1-054 150 Pcs Made of steel

707-0WK0-054 707-0WL0-054

1.66 37.4 62.0 K 3.2 11.9 37.4 62.0 K 3.2 11.9

Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number

For wood doors

EasyFix

707-0ZL4-054 Drilling patterns for hinge cups > see page 1.10

707-0ZK4-054

Cranking 17mm

EasyFix

Drilling patterns for hinge cups > see page 1.10 95°

Opening angle 95˚

Drilling diameter for hinge cup 35mm · Drilling depth 12mm · Hinge on plate mounting system 3Way snap-on 45 9.5 Ø 35 48 6 Ø 35 PushOpen Solutions > see pages 1.88-1.95 4 16 7.5 Mounting

Hinge

pre-mounted Cam

Cruciform

Face

10000

Legend of hinge cup symbols Screw-on ready < screws EasyFix system Machine insertion ready Soft closing systems Push opening Glissando CR > see page 2.199 in Furniture Fitting Systems catalogue Glissando TT > see page 2.199 in Furniture Fitting Systems catalogue Accessories Cover caps for hinge arm > see page 1.84

707-0WK1-054 707-0WL1-054 150 Pcs Made of steel

707-0WK4-054 707-0WL4-054

plates

cup screws

not

adjustable cruciform mounting plate > see page 1.78

mounting plate > see page 1.80 Cam adjustable linear mounting plate > see page 1.78

frame adapter plate > see page 1.80 820-6328-050

Pcs

Mounting details

Drawings show application on D=0mm mounting plate

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 1.6

Drawings show application on D=2mm mounting plate

T-type Hinges 1.67 Side adjustment +3/-1mm Height adjustment +2/-2mm Depth adjustment +4/-1mm

Door

adjustment

X 4 5 6 7 8 9 10 11 12 13 K 3 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 7 4 3 2 1 0 8 4 3 2 1 0 9 4 3 2 1 0 D D=4+K-X V 20 22 24 26 28 30 32 K 3 0 0 1 1 2 3 4* 4 1 1 2 2 3 4 4* 5 2 2 3 3 4 4 4* 6 3 3 4 4 4* 4* 7 4 4 4* 4* 4* 4* D D=-4+K+F *Hinge adjustment needed

further

> see pages 1.14-1.16

further

> see page 1.7 V 20 22 24 26 28 30 32 34 K 3 0.6 0.9 1.3 1.7 2.2 4.0 5.9 7.8 4 0.6 0.9 1.2 1.7 2.2 3.4 5.2 7.1 5 0.6 0.9 1.2 1.6 2.1 2.9 4.6 6.5 6 0.6 0.9 1.2 1.5 2.1 2.6 4.1 5.9 7 0.6 0.9 1.2 1.5 2.1 2.6 3.6 5.3 8 0.6 0.8 1.2 1.5 2.0 2.5 3.2 4.8 9 0.6 0.8 1.2 1.5 2.0 2.5 3.1 4.4 FMIN 37+V Z 37 27.5 37.5 68.5 37 20 30 D D S S X F>2Fmin F>Fmin K K V V Gap Z V 20 22 24 26 28 30 32 34 K

0 0 0 0 0 0 0 0 4 0 0 0 0 0 0 0 0

For

explanation

Door clearance at R=1mm For

explanation

0 0 0 0 0 0 0 0

0 0 0 0 0 0 0 0 9 0 0 1.6 1.7 1.8 2.0 2.1 2.3 ZMIN

T-type 110 Unsprung Hinge

· Opening angle 110˚

· Drilling diameter for hinge cup 35mm

· Drilling depth 12mm · Hinge on plate mounting system 3Way snap-on

Cranking 0mm 704-0593-054

704-0553-054

Drilling patterns for hinge cups > see page 1.10

150 Pcs Made of steel

Cranking 5mm 704-0661-054 704-0673-054

Drilling patterns for hinge cups > see page 1.10

150 Pcs Made of steel

Mounting plates

Cam adjustable cruciform mounting plate > see page 1.78

Cruciform mounting plate

> see page 1.80

Hinge cup screws If not pre-mounted

820-6328-050 10000 Pcs

Cam adjustable linear mounting plate > see page 1.78 Face frame adapter plate > see page 1.80 Accessories

of hinge cup symbols

ready < screws

1.82

1.68 37.4 62.1 K 3.2 11.7 37.4 62.1 K 3.2 11.7

Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number

For wood doors

EasyFix

704-0672-054

EasyFix 704-0604-054

110°

Touch 45 9.5 Ø 35 48 6 Ø 35 4 16 7.5

Hinge

Cover

angle restrictor > see page

caps for hinge arm > see page 1.84

Screw-on

EasyFix

Legend

system

· Concealed hinge without spring to be used with PushOpen mechanisms with magnet >

adjustment

Mounting details Mounting plate thickness table

T-type Hinges 1.69 37 37 V V Side adjustment +3/-1mm Height adjustment +2/-2mm Depth adjustment +4/-1mm

For further explanation > see page 1.6 Door

X 13 14 15 16 17 18 19 K 3 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 D D=13+K-X X 8 9 10 11 12 13 14 K 3 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 D D=8+K-X

plate drilling distance Door clearance at R=1mm For further explanation > see page 1.7 V 16 17 18 19 20 21 22 23 24 25 26 K 3 0.5 0.7 0.8 1 1.2 1.5 1.7 2.1 2.8 4.1 5.5 4 0.4 0.7 0.8 1 1.2 1.5 1.7 2.1 2.3 3.1 4.5 5 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 3.5 6 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 2.9 FMIN Gap ZMIN=0

For further explanation > see pages 1.14-1.16 Push opening PushOpen Solutions > see pages 1.88-1.95 37 37 23.5 18.5 67.5 67.5 37 37 15.6 10.6 D X X S S V V K K F>Fmin

Mounting

see pages 1.90-1.95

T-type 110 Unsprung Hinge

Cam adjustable cruciform mounting plate

> see page 1.78

Cruciform mounting plate

> see page 1.80

Cam adjustable linear mounting plate

> see page 1.78

For wood doors

1.70 37.4 62.1 K 3.2 11.7

Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number

704-0595-054 704-0674-054 EasyFix

hinge

see

150

steel 110°

Cranking 9mm

704-0697-054 Drilling patterns for

cups >

page 1.10

Pcs Made of

angle 110˚

diameter

hinge

35mm

Drilling depth 12mm

on plate mounting system 3Way snap-on Touch 45 9.5 Ø 35 48 6 Ø 35 4 16 7.5

· Opening

· Drilling

for

cup

· Hinge

Mounting plates Hinge cup screws If not pre-mounted

Accessories Hinge angle restrictor > see page 1.82 Cover caps for hinge arm > see page 1.84 820-6328-050 10000 Pcs Legend of hinge cup symbols Screw-on ready < screws EasyFix system

Face frame adapter plate > see page 1.80

· Concealed hinge without spring to be used with PushOpen mechanisms with magnet

Mounting details

adjustment

> see pages 1.90-1.95 For further explanation > see pages 1.14-1.16 Push opening PushOpen Solutions > see pages 1.88-1.95

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 1.6

T-type Hinges 1.71 Side adjustment +3/-1mm Height adjustment +2/-2mm Depth adjustment +4/-1mm

X 4 5 6 7 8 9 10 K 3 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 D

Door

D=4+K-X

Door clearance at R=1mm

For

37 27.5 67.5 37 19.6 D X S V K F>2Fmin

T-type 170

1.72

Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number Cranking 0mm 702-0EK0-054 702-0EL0-054

EasyFix

patterns

hinge

page

Made of steel and zinc 170°

Opening angle 165˚

Drilling diameter for hinge cup 35mm · Drilling depth 12mm · Hinge on plate mounting system 3Way snap-on For wood doors 45 9.5 Ø 35 48 6 Ø 35 64 11 5 2 5 37,4 K 4 16 7.5

Hinge

702-0EK1-054 702-0EL1-054

702-0EK4-054 702-0EL4-054 Drilling

for

cups > see

1.10

Pcs

Mounting plates

cup screws If not pre-mounted Cam adjustable cruciform mounting plate > see page 1.78

Cruciform mounting plate > see page 1.80

frame adapter plate

Accessories Hinge angle restrictor > see page 1.82 820-6328-050 10000 Pcs Legend of hinge cup symbols Screw-on ready < screws EasyFix system Machine insertion ready

Cam adjustable linear mounting plate > see page 1.78 Face

> see page 1.80

Mounting details

Drawings show application on D=0mm mounting plate

No door protrusion in 90° position

Mounting plate

drilling distance Soft closing systems

Glissando TL 170 > see page 2.191 in Furniture Fitting Systems catalogue

Glissando CR > see page 2.195 in Furniture Fitting Systems catalogue Push opening PushOpen

Door adjustment

For further explanation > see pages 1.14-1.16

Mounting plate thickness table For further explanation > see page 1.6

C value with D=0 mounting plates

Door clearance at R=1mm

For further explanation > see page 1.7

T-type Hinges 1.73 37 Side adjustment +3/-1mm Height adjustment +2/-2mm Depth adjustment +4/-1mm

37 C 52 D 7 37 67 F>Fmin S V K -1.4 90° X 13 14 15 16 17 18 19 20 K 3 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 7 4 3 2 1 0 D D=13+K-X

Solutions > see pages 1.88-1.95

K 3 4 5 6 7 C -9.0 -8.1 -7.1 -6.1 -5.2 D

T-type 170

Cranking 5mm

50 Pcs Made of steel and zinc

Cranking 9mm

50 Pcs Made of steel and zinc

Cruciform mounting plate > see page 1.80

Cam adjustable linear mounting plate > see page 1.78

Face frame adapter plate > see page 1.80

Drilling patterns for hinge cups > see page 1.10

1.74

Technical details Cup type Interaxis 45mm Interaxis 48mm Item number Item number

702-0FK0-054 702-0FL0-054

702-0FK1-054 702-0FL1-054

EasyFix 702-0FK4-054 702-0FL4-054

hinge cups

Drilling patterns for

> see page 1.10

702-0GL0-054 702-0GK1-054 702-0GL1-054

702-0GK0-054

EasyFix 702-0GK4-054 702-0GL4-054

170°

depth 12mm

Hinge on plate mounting system 3Way snap-on For wood doors 45 9.5 Ø 35 48 6 Ø 35 64 11 5 2 5 37,4 K 64 11 5 2 5 37,4 K 4 16 7.5 Mounting plates Hinge cup screws If not pre-mounted

plate

· Opening angle 165˚ · Drilling diameter for hinge cup 35mm · Drilling

Cam adjustable cruciform mounting

> see page 1.78

Accessories Hinge angle restrictor

820-6328-050 10000 Pcs Legend of hinge cup symbols Screw-on ready < screws EasyFix system Machine insertion ready

> see page 1.82

Mounting details

Drawings show application on D=0mm mounting plate

Mounting plate

Drawings show application on D=0mm mounting plate

Drawing show application on D=0mm mounting plate

Glissando TL 170 > see page 2.191 in Furniture Fitting Systems catalogue

Glissando CR > see page 2.195 in Furniture Fitting Systems catalogue Push opening

PushOpen Solutions > see pages 1.88-1.95

T-type Hinges 1.75 37 V 67 F>2Fmin D 61 S V 67 70 S 79 S V 67 C K 7.6 F>Fmin 61 19 D x 37 67 19 90˚ 37 V 67 F>2Fmin D 61 S V 67 70 S 79 S V 67 C K 7.6 F>Fmin 61 S D x 37 67 V 90˚ 37 V 67 F>2Fmin D 61 S V 67 70 S 79 S V 67 C K 7.6 F>Fmin 61 19 D x 37 67 19 90˚ X 1 2 3 4 5 6 7 8 9 10 11 K 3 6 3 2 1 0 4 6 3 2 1 0 5 6 3 2 1 0 6 6 3 2 1 0 7 6 3 2 1 0 D D=4+K-X X 8 9 10 11 12 13 14 K 3 3 2 1 0 4 4 3 2 1 0 5 4 3 2 1 0 6 4 3 2 1 0 D D=8+K-X Side adjustment +3/-1mm Height adjustment +2/-2mm Depth adjustment +4/-1mm For further explanation > see pages 1.14-1.16

For further explanation > see page 1.6 Door adjustment

further

1.7 V 16 17 18 19 20 21 22 23 24 K 3 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 4 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 5 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 6 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 2.6 7 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 5.1 FMIN Gap ZMIN=0.5

Mounting plate thickness table

Door clearance at R=1mm For

explanation > see page

drilling distance

C K 3.6 F>Fmin V 90˚ C K 57 D 19 37 67 Soft

closing systems

T-type for Pie-cut Corner Cabinet

· Opening angle

· Drilling diameter for hinge cup 35mm

· Drilling depth

· Hinge on plate mounting system

721-0PK4-650 721-0PL4-650

Drilling patterns for hinge cups > see page 1.10 50 Pcs Cup made of zinc, arm made of steel

Mounting plates

Hinge cup screws If not pre-mounted

Cam adjustable cruciform mounting plate

> see page 1.78

Cruciform mounting plate

> see page 1.80

Cam adjustable linear mounting plate

> see page 1.78

Face frame adapter plate > see page 1.80

1.76

Cup type Interaxis 45mm Interaxis 48mm Item number Item number Corner

EasyFix

For wood doors

cabinet 721-0PK0-650 721-0PL0-650

70˚/25°

11mm

3Way

45 9.5 Ø 35 48 6 Ø 35 10.9 3.6 37,4 K 65.8 4 16 7.5

snap-on

Accessories Cover

hinge

10000

Legend of hinge cup symbols Screw-on ready < screws EasyFix system

caps for

arm > see page 1.84 820-6328-050

Pcs

For further explanation > see pages 1.14-1.16

Mounting details Adjustments

Push opening

PushOpen Solutions > see pages 1.88-1.95

Any T-type mounting plate can be used

The adjustment of the gap between two doors is done by rotating the adjustment screw as shown on the drawing

Drawings show application on D=2mm mounting plate

T-type Hinges 1.77 V = 16 - 22 mm K = 3 - 5 mm K 32 35 37 D=3 +3 -1 v 11.5 +6 -2 +5 -1.5 19 19 D=2 -6 +6 -1 +3 -2.5 +2.5 70°

K=3-6 25° V

V=16-25mm

Side adjustment +2.5/-2.5mm Height adjustment +2/-2mm Depth adjustment +3/-1mm

Mounting plate drilling distance

Door adjustment

· Use in pair with 170° hinge

T-type Mounting Plates

3Way snap-on mounting

1.78

Cam adjustable cruciform mounting plate 37mm 150 Pcs Made of steel Cam adjustable linear mounting plate

Drilling pattern Dimensions 53 57.2 19.9 65.2 37 32 20 32

150 Pcs Made of steel and zinc

0mm 700-0KC0-054 700-0KB0-054 700-0KF0-054 700-0KA0-054

1mm 700-0KC1-054 700-0KB1-054 700-0KF1-054 700-0KA1-054

2mm 700-0KC2-054 700-0KB2-054 700-0KF2-054 700-0KA2-054

3mm 700-0KC3-054 700-0KB3-054 700-0KF3-054 700-0KA3-054

4mm 700-0KC4-054 700-0KB4-054 700-0KF4-054 700-0KA4-054

0mm 700-0LC0-650 700-0LB0-650 700-0LF0-650

2mm 700-0LC2-650 700-0LB2-650 700-0LF2-650

3mm 700-0LC3-650 700-0LB3-650 700-0LF3-650 Legend of mounting plate type symbols

T-type Hinges 1.79

Mounting plate thickness

15 10.5 15

Item number Item number Item number no pre-drilling required Item number

Mounting plate type

Mounting plate thickness (D)

15 10.5 15

Pre-mounted

expanding dowels Pre-mounted chipboard screw Height adjustment +2/-2mm Height adjustment +2/-2mm Ø5 min 11.5 15 Ø10 min 10.5 D Ø5 min 10.5 Ø5 min 11.5 min 10.5 min 15 Ø5 min 11.5 min 10.5 min 15

Pre-mounted 15mm euro screws Machine insertion ready

10.5mm

T-type Mounting Plates

Cruciform mounting plate 37mm

150 Pcs Made of steel Cam adjustable face frame mounting plate

150 Pcs Made of steel and zinc

Fixing screw for cruciform mounting plate If not pre-mounted

3Way snap-on mounting

1.80 67.7 58 4 16 7.5

Drilling pattern Dimensions Chipboard screws 820-6328-050 10000 Pcs

37 32 11 Ø3 40 53 57.2

0mm

1mm 700-0NA1-054 700-0NC1-054 700-0NB1-054 700-0NF1-054 700-0NE1-054

2mm 700-0NA2-054 700-0NC2-054 700-0NB2-054 700-0NF2-054 700-0NE2-054

3mm

4mm

0mm

3mm

6mm

700-0KW0-650

700-0KW3-650

700-0KW6-650

T-type Hinges 1.81

15 10.5 14.5

Item number Item number Item number Item number Item number Item number

Mounting plate thickness Mounting plate type

Mounting plate thickness (D)

700-0NA0-054 700-0NC0-054 700-0NB0-054 700-0NF0-054 700-0NE0-054

700-0NA3-054 700-0NC3-054 700-0NB3-054 700-0NF3-054 700-0NE3-054

700-0NA4-054 700-0NC4-054 700-0NB4-054 700-0NF4-054 700-0NE4-054

15 10.5 14.5 Screw-on ready for chipboard screws < screws Pre-mounted 15mm euro screws Machine insertion ready Pre-mounted 10.5mm expanding dowels Pre-mounted chipboard screw Height adjustment +2/-2mm Height adjustment +2/-2mm Ø5 min 12 15 Ø5 min 10.5 3.9 D Ø10 min 10.5 Ø3 min 11.5 min 14.5

Legend of mounting plate type symbols

Hinge Angle Restrictors

Pcs Made of plastic

200 Pcs Made of plastic

For

1.82 16 13.5 Technical details Item number Light grey 80° Hinge Angle Restrictor T-type For all T-type 110° 728-4669 > 380 200

135° Hinge Angle Restrictor For all 170° hinges 248-4672 > 380

80° 135°

all

110°

170° opening angle

Titus Hinges with

and

Hinge angle restrictor limits opening angle

Prevents door damage

Easy and quick mounting and dismounting

Mounting details

Open the door to approximately 75° and position angle restrictor below links to follow the hinge cup form

Slightly open the door to hear the click meaning angle restrictor is in the right position

Hinge must be in closed position

Insert angle restrictor into the hinge cup

Recommended to insert angle restrictor while doors are not mounted on the cabinet

When angle restrictor is in the right position push it down

T-type Hinges 1.83 75° 75° 75°

Close the door to remove the restrictor holder (cracks by itself while closing the door)

Cover Caps

Rectangular cover cap for T-type

5000 Pcs Made of steel

Rounded cover cap for T-type

5000 Pcs Made of steel

For hinge arms

> 054

steel 728-1283 > 054

Only for T-type 110 0mm, 120 0mm, 110/15°, 110/30°, 110/45° 9mm, 17mm and 23mm, 110/90° 17mm

> 054

For all T-type range

1.84 36.5 12 34.1 10.6

Technical details Plate type Material/ surface Item number Nickel plated

Titus

neutral

steel 728-1286

Titus steel 728-1287

neutral steel 728-1284

1.85

T-type Hinges

PushOpen Solutions

Push Latch S2

· Damping system controls the outward motion, making the door opening decisive but soft, silent and bounceless

· Ensures soft landing of the door using damped or non-damped hinges

Safety detachment

· Push Latch easily disengages from the mounting plate in case of accidental hits

· Secure detachment

Push

Effortless touch opening

· Easy opening with minimum effort

· Gentle, reliable closing with just a light louch

1.86

Reliable performance

· Reliable door opening and closing throughout the life-time

Toolless door gap adjustment

· Easy to compensate any door gaps that might occur during installation

· Simple turn of the adjustment button by hand

· Ensures reliable closing and opening of doors or drawers

1.87

Push Latch S2

1.88 6.3 L 8 4 12 7.5

Item number Silver grey Push Latch S2 Titus logo 915-0W34 > 381 Set consists of: 100 Sets Made of steel and plastic Push

For

screws for mounting plates Euro screws 821-6323-050 5000 Pcs Chipboard screws 820-6328-050 10000 Pcs 13 16

Push Latch S2

wood doors 100 Sets + Fixing

Linear mounting plate with lip

Bounceless and reliable door opening and closing

Safety detachment feature of the mechanism from its mounting plate

Depth adjustment assures reliable and consistent push-to-open action

Compatibility with damped or non-damped hinges ensures soft landing of the door

Push Latch S2 works with standard hinges with and without damping.

Drilling pattern Mounting

Depth adjustment

Depth adjustment -1/+4mm

Recommended position on the cabinet

Adjustment range

Minimum activation gap required

Close to the ‘touch opening point’ on the side opposite to hinges

For application on cabinets with more than 2 hinges and cabinets with narrow doors we recommend a trial mounting.

PushOpen Solutions 1.89 i 2. min. 2mm 1. -1mm +4mm 37 32 20 Ø6.4(3x)

Push Latch

1.90 B 11 A 4 12 7.5 6.3 L 8 A B 10.5 1 Fixing

Accessories

(Nickel

steel) Counter

A = Ø15 915-7159-050 500 Pcs Counter

A = Ø10 B = Ø5 915-7196-050 500 Pcs A = Ø15 B = Ø8 915-7190-050 500 Pcs Knock-in Counter plate A = Ø10 B = Ø2.8 915-7199-050 500 Pcs Spring force [N] (released) Spring force [N] (loaded) Item number Silver grey Push

With bumper 10 20 915-0X59

381 With bumper 13 27 915-0320

With magnet 10 20

Linear m. plate 915-4175

Cruciform m. plate

381 With bumper Sets:

plate Linear m. plate

200

200 Sets With magnet

200

screws for mounting plates

for Push Latch with magnet

plated

plate self adhesive

plate

Latch

> 381

915-0D22 > 381

> 381

915-4183 >

Cruciform m.

915-0X59-381-K1 915-0X59-381-K2 200 Pcs Made of steel and plastic

Sets

915-0D22-381-K1 915-0D22-381-K2

Sets

Push Push Push

Cruciform

Linear mounting

For wood

0.8 A + + + +

Latch

mounting plate

plate

doors and drawers Euro screws 821-6323-050 5000 Pcs Chipboard screws 820-6328-050 10000 Pcs 13 16

Effortless opening with just a light touch

Depth adjustment ensures reliable closing and consistent performance in case of inaccurate drilling

‘Safety click’ feature for easy detachment of the mechanism from its mounting plate

Push Latch with bumper works with standard hinge

Push Latch with magnet works with reverse spring or unsprung hinges

PushOpen Solutions 1.91 37 37 32 32 Ø6.4(3x) Ø6.4 Ø6.4 Ø5 20 16.5 2 43 2 43 i 11.2 Drilling pattern Dimensions Depth adjustment Positioning Minimum activation gap required Adjustment range +4.5/-1mm

Close to the ‘touch opening point’ on the side opposite to hinges On the cabinet side; gap between drawer and cabinet side 12mm min

Depth adjustment +4.5/-1mm Door adjustment

On the drawer bottom; in the middle of drawer

PushOpen Short

1.92 +4 14 47 Ø 9.8 Ø 9.8 +4 14 60 22 14.5 15.5 16 Ø 4,5 Ø 8 Technical details Stroke [mm] Item number White Grey Lead grey Black PushOpen Short With bumper 14 915-7187 > 350 380 383 390 With magnet 14 915-7185 > 350 380 383 390

Pcs Made of steel and plastic Housing Short 915-7192 > 350 380 383 390 100 Pcs Made of plastic

100

4 16 7.5 Fixing screws for housing Accessories for PushOpen with magnet (Nickel plated steel) Counter plate self adhesive A = Ø15 915-7159-050 500 Pcs Counter plate A = Ø10 B = Ø5 915-7196-050 500 Pcs A = Ø15 B = Ø8 915-7190-050 500 Pcs Knock-in Counter plate A = Ø10 B = Ø2.8 915-7199-050 500 Pcs A B 10.5 1 A A B 11 0.8 Chipboard screws 820-6328-050 10000 Pcs Push

Effortless opening with just a light touch

Depth adjustment ensures reliable opening

PushOpen with bumper works with standard hinge

PushOpen with magnet works with reverse spring or unsprung

Door adjustment

hinges Depth adjustment +4/0mm

Drilling pattern and mounting procedure Depth adjustment

Without housing

With housing

Adjustment made by rotating the depth adjustment screw

PushOpen Solutions 1.93 i 8 15 37 ø3 spotdrilling B Ø10 min.50

on door for

on door for Counter plate with double side tape and knock-in counter plate

Application

Counter plates Application

Positioning

Close to the ‘touch opening point’ on the side opposite to hinges Sticking or knock-in position

ØB

Pre-drilled hole x 10mm

PushOpen Long

1.94 +4 37 89 22 14.5 32 15.5 16 Ø 4,5 Ø 8 +4 37 80 Ø 9.8 Ø 9.8 4 12 7.5 16 Technical details Stroke [mm] Item number White Grey Lead grey Black PushOpen Long With bumper 37 915-7188 > 350 380 383 390 With magnet 37 915-7186 > 350 380 383 390 100 Pcs Made of steel and plastic Housing Long 915-7193 > 350 380 383 390 100 Pcs Made of plastic

Fixing screws for housing Accessories for PushOpen with magnet (Nickel plated steel) Counter plate self adhesive A = Ø15 915-7159-050 500 Pcs Counter plate A = Ø10 B = Ø5 915-7196-050 500 Pcs A = Ø15 B = Ø8 915-7190-050 500 Pcs Knock-in Counter plate A = Ø10 B = Ø2.8 915-7199-050 500 Pcs A B 10.5 1 A A B 11 0.8 Push Chipboard screws 820-6328-050 10000 Pcs

Effortless opening with just a light touch

Depth adjustment ensures reliable opening

PushOpen with bumper works with standard hinge

PushOpen with magnet works with reverse spring or unsprung

hinges

Adjustment made by rotating the depth adjustment screw

Application on door for Counter plates

Application on door for Counter plate with double side tape and knock-in counter plate

Positioning

Depth adjustment +4/0mm

Sticking or knock-in position

Close to the

PushOpen Solutions 1.95 i 8 15 37 47 B

Ø10 min.83

Drilling pattern and mounting procedure Depth adjustment Without housing With housing

Pre-drilled hole ØB x 10mm

adjustment

Door

ø3

spotdrilling ‘touch opening point’ on the side opposite to hinges

The Titus Group Profile

Titus Group

Titus focuses on the design, manufacture and distribution of connectors, concealed hinges drawers and soft closing mechanisms in furniture and household appliances.

Titus Group is owned and managed from its headquarters in United Kingdom. We are able to provide products and services to every customer around the world based on manufacturing and distribution facilities in Europe, North America, China, SE Asia, Australia and New Zealand.

1973

Titus established 1975 Revolution in particleboard panel processing productivity

1977

Titus launches concealed cabinet connector

Quickfit technology makes Titus the World leader in connectors for RTA furniture

1980

Titus USA office and manufacturing established

2005

Titusonic ultrasound fastening technology

2006 Merger with Lama d.d. Launch of Glissando

2017 Launch of T-type full hinge programme 2019 Launch of TeraBlack product range

2007

Titus becomes Titus+ Specialist in precision components’ engineering

2009

Damper’s development and engineering

1990

Inovative Quickfit technology launched

2020

Acquisition of Simon Kinetics

2022 Acquisition of Titus Precision

2014 Acqusition of Tekform, Australia

2023 Launch of T-type PressTo tool-less mounting

1.98

Vision

The world’s best engineering for precision components

Mission

To provide manufacturers with components’ solutions that improve competitiveness

Titus Business Philosophies and Principles

· Gain total knowledge of our customers and their markets

Focus on identifying and creating high volume component niches

Meet our customers’ expectations with global consistency

Build long term associations with customers, suppliers, colleagues and shareholders

Die casting

Invest in the abilites of individuals at every level

· Continuously enhance input efficiency and sustainability

Precision Components Technologies

Damped components

Furniture Hardware

Cabinet connectors

Concealed hinges

Soft closing systems

Drawers and drawer systems

Kitchen accessories

RV hardware

Furniture Hardware Tooling Dampers

Automated assembly systems

Drawers Connectors

Damped hinges

Components

Hydraulic dampers

Precision components

Precision die castings

Damped mechanisms

Titusonic FastFit

Technologies

Automated assembly systems

Die casting technologies

Tooling

Titusonic - Ultrasound fastening FastFit technology

5.4

‘Totally Integrated Engineering’

Product Design

Design and engineering of unique components

Consistent and repeatable product quality

Manufacturing Technologies

To improve productivity and product quality

Product Design

Precision Components

Manufacturing Operations

A wide array of technologies and services required for high volume production of precision components available in-house

Fittings for purpose

Unique product advantages for better value for money and lower ‘total installed cost’

Manufacturing Operations

Innovations that improve

Manufacturing Technologies

With less parts, less different parts, less preparation actions, faster assembly Fast time-to-market

1.100

Die casting Forging Combi casting Surface treatment Conventional casting Heat treatment Stamping Assembly Moulding Packing

Continuous Improvement

The Titus Group Mission, to improve the competitiveness of our customers, encourages us to continuously improve our products, services, processes and competencies of our employees.

Quality

We believe that the Titus Mission is achieved most effectively through the management of our design, manufacturing and service activities in conformance with the ISO 9001 standard for quality management. Quality has a broad meaning for us: it is our guide to the selection of materials, work, processes, internal relations and cooperation with partners.

Products

Our integrated quality system produces technically optimized products of high quality. They are assessed regularly in our own test labs as well as by internationally renowned institutions, such as LGA from Germany, CTBA from France, FIRA from United Kingdom, CATAS from Italy, AIDIMA from Spain, and others.

1.101 Quality

Worldwide Design, Manufacturing and Distribution Capabilities

Europe

Titus d.o.o. Dekani

Dekani 5

SI-6271 Dekani

Slovenia

+386 5 6690 101

+386 5 6690 205 Fax info@titusplus.com

Titus Technologies d.o.o. Dekani 5 SI-6271 Dekani

Slovenia

+386 5 6690 422 technologies@titusplus.com

Titus Technologies d.o.o., PE Kozina

OIC Hrpelje 36 SI-6240 Kozina

Slovenia

+386 5 6690 422 technologies@titusplus.com

Titus Plus Adria d.o.o. Ulica Kreše Golika 3 HR-10090 Zagreb

Croatia

+385 1 3323 033 +385 1 3323 233 Fax croatia@titusplus.com

Titus Polska Sp. z o.o. Ul. Stefańskiego 17 A PL-62-002 Suchy Las/Poznań

Poland

+48 61 811 5402 Phone/Fax +48 61 811 5684 Phone/Fax

+48 61 821 9362 poland@titusplus.com

TitusPlus Italia S.r.l. Via Aquileia 9 Frazione Olmi

IT-31048 San Biagio di Callalta (TV)

Italy

+39 04 221 650 120

+39 04 221 650 136 Fax italia@titusplus.com

TitusPlus Iberia SLU C/ Luxemburg 16

ES-08520 Les Franqueses del Valles

Spain

+34 938 715 404 +34 938 605 498 Fax iberia@titusplus.com

Titus GmbH

Lübberlindenweg 12 DE-32049 Herford Germany + 49 5221 1024880 germany@titusplus.com

Titus Tool Company Ltd. 10 blackburn Industrial Estate Enterprise Way Sherburn in Elmet LS256NA

United Kingdom + 44 1977 682582 + 44 1977 680481 Fax uk@titusplus.com

Australia and New Zealand

Titus Tekform Pty Ltd 83 Jedda Road

Prestons NSW 2170

Australia

+61 2 9286 0007

+61 2 9826 0074 info@titustekform.com.au www.titustekform.com.au

Stefano Orlati Ltd 34 Waipareira Avenue

Henderson

Auckland

New Zealand

+64 9 837 0886

+64 9 837 8003 Fax

stefano-orlati@titusplus.com www.stefano-orlati.co.nz

America

Titus Precision LLC

900 W Connexion Way

Columbia City, IN 46725

USA

+1 260 244 6114

+1 425 746 2080

+1 425 746 2344 Fax usa@titusplus.com

Asia

Titus Tool Co. Pte. Ltd.

5004 Ang Mo Kio Ave 5 Techplace II #04-01

Singapore 569872

Singapore

+65 6383 3922

+65 6383 3178 Fax singapore@titusplus.com

Titus Guangdong Components Co. Ltd. Room 101, Building No. 1 No. 358 Daxing Road

Yangwu Village, Dalingshan Town Dongguan City

Guangdong Province

China

+86 769 85659801 803 china@titusplus.com

Titus Shenzhen Components Co. Ltd.

1st Floor Building No. 2

Heng Changrong High-tech

Industrial Park

ShangNan South Road

Shangjin Street

Bao'an District

Shenzhen City

Guangdong Province

China

+86 755 8348 0916

+86 8359 2676 china@titusplus.com

Titus Tekform Indonesia, PT Taman Teknoblok L2 No. 7

Bumi Serpong Damai Sektor XI

15314 Tangerang

Indonesia

+62 21 70753578

+62 21 75873574 Fax indonesia@titusplus.com

Headquarters

Titus International Ltd

28 Fitzroy Square

W1T 6DD London

United Kingdom

+44 20 8004 8083

info@titusplus.com www.titusplus.com

1.102

Croatia Titus

Sp. z o.o.,

Poland New Zealand

Titus

Plus Adria d.o.o., Zagreb

Polska

Suchy Las, Poznan

United

Titus Tekform, Pty. Ltd., Sydney Australia Titus Tekform: Sydney Newcastle Brisbane Townsville Adelaide ModulR Plus Pty. Ltd., Sydney Melbourne Wodonga Hobart Canberra Perth Stefano Orlati Ltd., Auckland Stefano Orlati Ltd., Christchurch Indonesia Titus Tool Co. Pte. Ltd., Singapore China / Hong Kong SAR TitusPlus Italia S

, San

Italy Titus International Ltd., London Titus Tool Company Ltd, Sherburn in Elmet United Kingdom Spain TitusPlus Iberia S.L.U., Les Franqueses del

Barcelona Titus GmbH, Herford Germany

Titus Precision LLC, Columbia City, IN

States

r.l

Biagio Callalta (T V )

Valles,

Hong Kong Ltd., Hong Kong

Furniture Fittings Trading (Shenzhen) Co., Ltd., Baoan District, Shenzhen Province

Shenzhen Components Co. Ltd., Shenzhen

Guangdong Components Co. Ltd., Dongguan City, Guangdong Province Titus

Dekani Titus Technologies d.o.o., Dekani Titus Technologies d.o.o.,

Slovenia Malaysia Singapore PT Titus

Distribution point Production Headquarters Distribution point Production Headquarters New Zealand Titus Precision LLC, Columbia City, IN Titus Tekform, Pty. Ltd., Sydney Australia Titus Tekform: Sydney Newcastle Brisbane Townsville Adelaide ModulR Plus Pty. Ltd., Sydney Melbourne Wodonga Hobart Canberra Perth Stefano Orlati Ltd., Auckland Stefano Orlati Ltd., Christchurch TitusPlus Italia S.r.l., San Biagio di Callalta (TV) Titus

SDN. BHD., Johor Bahru Malaysia PT Titus Tekform Indonesia, Tangerang

Titus Tekform (Malaysia) SDN. BHD., Johor Bahru

Titus

d.o.o. Dekani,

Kozina, Kozina Tekform Indonesia, Tangerang

Tekform (Malaysia)

1.104 Titus Group www.titusplus.com T-type PushOpen Solutions 01.1 ENG Apr23 Your authorized dealer