Page 1

ISSUE NO: 3 Cover 3.indd 1

SUPPLIER OF SCREWS, FIXINGS, FASTENERS, POWERTOOL ACCESSORIES AND BUILDERS HARDWARE

SUPPLIED BY:

SU PPL I E R OF

SCREWS, FIXINGS, FASTENERS, POWER TOOL ACCESSORIES & BUILDERS HARDWARE

2016/17 22/09/2016 11:29:38


CONTENTS

TIMBER CONSTRUCTION SCREWS

07 - 24

DRYLINING CONSTRUCTION SCREWS

25 - 28

METAL CONSTRUCTION SCREWS

29 - 40

WINDOW FABRICATION SCREWS

41 - 46

NUTS, BOLTS, SETS AND WASHERS

47 - 58

FIXINGS AND FASTENERS

59 - 64

PLASTERBOARD FIXINGS 65 - 67 CONCRETE AND MASONRY FIXINGS

68 - 81

COLLATED AND LOOSE NAILS

82 - 95

BUILDERS METAL WORK 96 - 109 DRILLING 110 - 134 CUTTING 135 - 160 DRIVER BITS 161 - 166 HAND TOOLS AND ACCESSORIES

167 - 171

PROTECTION AND ADHESIVES

172 - 177

DOOR ACCESSORIES 178 - 181 SECURITY SOLUTIONS

182 - 188 1 1


CONTENTS

RECESS STYLES POZI / CROSS RECESS

TIM DRIVE RECESS

Standard recess for woodscrews, chipboard screws etc.

High performance recess on TIMco Multi-Fix and Velocity screws.

PHILLIPS RECESS

SQUARE RECESS / ROBERTSON DRIVE

Standard recess for self-drilling, drywall and window screws.

Recess on square drive pan self-drilling screws and solo screws.

COMBI RECESS A combination of a traditional slotted recess with a more common pozi recess.

HEAD TYPES COUNTERSUNK HEAD

BUGLE HEAD

Designed for countersinking into timber for a flush or recessed finish. May have ribs to assist countersinking.

A curved surface under the head to prevent damage or tearing to the plasterboard paper.

DOUBLE COUNTERSUNK

PAN / ROUND HEAD

Improved design on the countersunk head to give additional head strength and assist countersinking.

Head with a flat underside. Designed for application fixing against metal surfaces.

DOUBLE COUNTERSUNK WITH RIBS

WAFER / FLANGE HEAD

Ribs under head to assist with countersinking.

SHALLOW PAN COUNTERSUNK A special head designed to assist with clamping and countersinking.

2

Low profile head with a flat underside for applications where a large clamping area and an unobtrusive head is required.

HEXAGON HEAD Positive drive Hex Head with an integral washer to increase clamping effectiveness.


CONTENTS SOCKET BUTTON HEAD

SOCKET CAP HEAD

Designed for a raised finish with a flat underside to aid clamping.

An industry standard, requiring a hex key to loosen or tighten.

THREAD TYPES COARSE THREAD (up to 16 TPI)

TWIN THREAD

Also know as spaced threads, they are normally used for all timber applications.

Also known as twin lead threads, they are designed to give a fast insertion time in soft material.

FINE THREAD (over 16 TPI)

HI-LO THREAD

Also known as metric threads, they are only used in steel applications. Fine threads are for use with thicker steels. (5 - 12mm thickness).

Used in soft timbers, plastics and into thin sheet sections. Hi-Lo threads have superior holding power compared to a low TPI coarse thread in these types of material.

SELF TAPPING THREAD A common thread design mainly used in steel applications. (1-5mm)

POINT STYLES NEEDLE / GIMLET AND SUPER SHARP POINT (SS) Designed for piercing timber, MDF, plastic and light gauge metal up to 0.6mm without pre-drilling.

SELF DRILL POINT For drilling into metals without the need for pre-drilling.

AB POINT

C2 SLASH

For use in pre-drilled sheet material applications.

Twin cut for rapid "pick up" and reduced splitting.

B POINT

TYPE 17 POINT

For use in pre-drilled shallow holes.

Also known as slash point, they are used for fixing timber without the need to pre-drill. The cutting edge helps reduces splitting of the timber.

3


CONTENTS

GAUGE

MEASURING LENGTH

The gauge of the screw is determined by the size of the outside thread diameter.

Fasteners with the following head types are measured from the underside of the head to the point of the screw:

Gauge 0g 1g 2g 3g 4g 5g 6g 7g 8g 9g 10g 12g 13g 14g 15g 16g 18g 20g 24g

Metric (mm)

1.5 1.9 2.25 2.5 3.0 3.3 3.5 3.9 4.2 4.5 4.8 5.5 6.1 6.3 6.5 6.8 7.5 8.1 9.4

THREAD LENGTH

PAN / ROUND

WAFER / FLANGE

HEXAGON

Fasteners with the following head types are measured from the top of the countersunk to the point of the screw:

COUNTERSUNK

DOUBLE CS

BUGLE

RAISED HEAD

DCS WITH RIBS

TPI - THREADS PER INCH The TPI is the number of thread crests that can be counted within 1� (25.4mm)

TPI

Drill Tip

44


CONTENTS

METRIC/IMPERIAL SIZE COMPARISON CHART Listed beside the common imperial sizes are the metric equivalents. Also listed are common ‘even’ approximate metric equivalents in brackets. Imperial (inch)

Metric

Imperial (inch)

Metric

(mm)

1/64” 1/32” 3/64” 1/16” 5/64” 3/32” 7/64” 1/8” 9/64” 5/32” 11/64” 3/16” 13/64” 7/32” 15/64” 1/4” 17/64” 9/32” 19/64” 5/16” 21/64” 11/32” 23/64” 3/8” 25/64” 13/32” 27/64” 7/16” 29/64” 15/32” 31/64” 1/2” 17/32” 35/64” 9/16” 37/64” 19/32” 39/64” 5/8” 41/64” 21/32” 43/64” 11/16” 45/64” 23/32” 47/64” 3/4” 49/64” 25/32” 51/64”

0.40 0.79 1.19 1.59 1.98 2.38 2.78 3.17 (3.0) 3.5 3.97 (4.0) 4.5 4.76 (5.0) 5.16 5.5 5.95 6.35 (6.0) 6.75 7.14 7.54 7.94 (8.0) 8.33 8.73 9.13 9.52 (10.0) 9.92 10.32 10.72 11.11 11.51 11.91 12.30 12.70 (13.0) 13.49 13.89 14.29 (14.0) 14.68 15.08 15.48 15.88 (16.0) 16.27 16.67 17.06 17.46 17.86 18.26 18.65 19.05 (19.0) 19.45 19.84 20.24

13/16” 53/64” 27/32” 55/64” 7/8” 57/64” 29/32” 59/64” 15/16” 61/64” 31/32” 63/64” 1” 1-1/16” 1-3/32” 1-1/8” 1-5/32” 1-3/16” 1-7/32” 1-1/4” 1-1/2” 1-3/4” 2” 2-1/4” 2-1/2” 2-3/4” 3” 3-1/4” 3-1/2” 3-3/4” 4” 4-1/2” 5” 5-1/2” 6” 6-1/2” 7” 7-1/2” 8” 8-1/2” 9” 9-1/2” 10” 11” 12” 13” 14” 15” 16” 18”

20.64 21.03 21.43 21.83 22.23 (22.0) 22.62 23.02 23.42 23.81 24.21 24.61 25.00 25.40 (25.0) 26.99 27.78 28.58 (28.0) 29.37 30.16 (30.0) 30.96 31.75 (32.0) 38.10 (38.0) 45.45 (45.0) 50.80 (50.0) 57.15 (57.0) 63.50 (65.0) 69.85 (70.0) 76.20 (75.0) 82.55 (82.0) 88.90 (90.0) 95.25 (95.0) 101.60 (100) 114.30 (115) 127.00 (125) 139.70 (140) 152.40(150) 165.10 (165) 177.80 (175) 190.50 (190) 203.20 (200) 215.90 (215) 228.60 (230) 241.30 (240) 254.00 (250/255) 279.40 (280) 304.80 (305) 330.20 (330) 335.60 (350/355) 381.00 (380) 406.40 (400/405) 457.20 (455/460)

(mm)

5


CONTENTS

PLATING & FINISH GUIDE Yellow (CR6) - Zinc electrolytic plating and yellow passivated after treatment for enhanced corrosion. Zinc (CR3) - A bright Zinc electrolytic plating with a clear toxin free finish. Complies with restrictions of hazardous substances in electrical/electronic equipment (ROHS) directive (2002/95/EC). Zinc (CR6) plating.

- A bright zinc electrolytic

Black Pass. - A zinc electrolytic plating with a black passivation after treatment to enhance corrosion resistance. Black Phos. - An immersed black phosphate plating for corrosion resistance and lubrication.

Exterior -A superior organic finish which is environmentally friendly and offers excellent resistance to corrosion in outdoor applications. Exterior includes; nano technology, silver ruspert, green and brown finishes. A2/Aust. SS - A non-magnetic austenitic steel suitable for many day to day external or corrosive applications offering an excellent resistance to corrosion. A4 SS - Similar to the A2 SS but more suitable for extremely corrosive applications, including marine environments. Martensitic SS - A magnetic, martensitic stainless steel with moderate heat resistance, with silver ruspert plating.

Nickel - An electroplated, high lustre, corrosion resistant finis

Bright

- Polished only.

Sherardised bonded plating.

- A dry galvanised, zinc

Galv. - A post-manufacturing electrogalvanic plating applied to the product. Pre-Galv. - A pre-manufacturing electro-galvanic plating applied to the product. FirmaGalv plating.

- A electro-galvanic

FirmaGalv+ - Similar to the electrogalvanic plating on FirmaGalv. This plating provides better corrosion resistance. Hot Dipped - A galvanised zinc plating which gives excellent corrosion resistance.

APPLICATION GUIDE

6

HARDWOOD

SOFTWOOD

CHIPBOARD

MDF

WOOD PANEL

PLASTIC

PLASTERBOARD

BRICK

CONCRETE

STONE

HOLLOW BLOCK

BLOCK

REINFORCED CONCRETE

HARD CONCRETE

CONCRETE (15-30)

KERBS/SLABS

CONCRETE PAVIORS

VITRIFIED CLAY PRODUCTS

SOFT CLAY

ENGINEERING BRICK

MEDIUM FACING BRICKS

SOFT FACING BRICK

CLAY PAVIORS

HARD SANDSTONE

SANDSTONE

CONCRETE ROOFING TILES

HARD SLATE

CLAY ROOF TILES

CERAMIC TILE

GLASS

MARBLE

PORCELAIN

DAMP/WET HOLES

UNDERWATER

LOW VENTILATION

HEAVY DUTY FIXING

REBAR

STEEL

ALUMINIUM

NONFERROUS METAL

STAINLESS STEEL

CAST IRON

THIN SHEET METAL


TIMBER CONSTRUCTION SCREWS 08 - VELOCITY 09 - C2 MULTI-PURPOSE 10 - C2 FLOORING 11 - C2 EXTERIOR 11 - C2 TONGUE-FIX 12 - CLASSIC

15 - SOLO 17 - TWIN-THREADED 18 - BLACKJAX 19 - MIRROR SCREWS 19 - CARCASS SCREWS 19 - SCREW CAPS

20 - MIXED TRAYS 20 - MIXED PACKS 21 - DECKING SCREWS 22 - TIMBER SCREWS 24 - COACH SCREWS


VELOCITY MULTI-PURPOSE SCREWS

TIMBER CONSTRUCTION SCREWS

VELOCITY®

Materials

Premium multi-use screw Available in:

Yellow

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials whilst achieving exceptional pull out resistance. Designed to give the user a consistent and reliable product that can be used in a variety of applications.

VELOCITY -

Yellow

Double Countersunk Product Code

Size (Metric)

Size (Imp. equiv.)

3.0 x 16 3.0 x 20 3.0 x 30 3.0 x 40 3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 45 3.5 x 50 4.0 x 16 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 60 4.0 x 70 4.0 x 80 4.5 x 30 4.5 x 40 4.5 x 50

4 x 5/8 4 x 3/4 4 x 11/4 4 x 11/2 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 11/4 6 x 13/8 6 x 11/2 6 x 13/4 6x2 8 x 5/8 8 x 3/4 8x1 8 x 11/4 8 x 13/8 8 x 11/2 8 x 13/4 8x2 8 x 21/2 8 x 23/4 8x3 9 x 11/4 9 x 11/2 9x2

Product Code

Qty

Boxes

Size (Metric)

Size (Imp. equiv.)

Qty

45060VY 45070VY 45080VY 50030VY 50040VY 50045VY 50050VY 50060VY 50070VY 50075VY 50080VY 50090VY 50100VY 60040VY 60045VY 60050VY 60060VY 60070VY 60080VY 60090VY 60100VY 60120VY 60130VY 60150VY 60180VY 60200VY

4.5 x 60 4.5 x 70 4.5 x 80 5.0 x 30 5.0 x 40 5.0 x 45 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 75 5.0 x 80 5.0 x 90 5.0 x 100 6.0 x 40 6.0 x 45 6.0 x 50 6.0 x 60 6.0 x 70 6.0 x 80 6.0 x 90 6.0 x 100 6.0 x 120 6.0 x 130 6.0 x 150 6.0 x 180 6.0 x 200

9 x 21/2 9 x 23/4 9x3 10 x 11/4 10 x 11/2 10 x 13/4 10 x 2 10 x 21/2 10 x 23/4 10 x 27/8 10 x 3 10 x 31/2 10 x 4 12 x 11/2 12 x 13/4 12 x 2 12 x 21/2 12 x 23/4 12 x 3 12 x 31/2 12 x 4 12 x 4 12 x 51/8 12 x 6 12 x 71/4 12 x 8

200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 200 200 200 200 100 100 100 100 100 100 100

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

12 x 6 12 x 7¼ 12 x 8 16 x 8 16 x 9 16 x 10 16 x 107/8 16 x 12

100 100 100 50 50 50 25 25

Boxes

30016VY 30020VY 30030VY 30040VY 35012VY 35016VY 35020VY 35025VY 35030VY 35035VY 35040VY 35045VY 35050VY 40016VY 40020VY 40025VY 40030VY 40035VY 40040VY 40045VY 40050VY 40060VY 40070VY 40080VY 45030VY 45040VY 45050VY

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200

VELOCITY - TIM DRIVE -

Yellow

Double Countersunk

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

10 x 2 10 x 2½ 10 x 2¾ 10 x 3 10 x 4 12 x 3 12 x 4 12 x 4¾

200 200 200 200 100 200 100 100

Boxes (Driver bit included) 50050VYTX 50060VYTX 50070VYTX 50080VYTX 50100VYTX 60080VYTX 60100VYTX 60120VYTX

8

5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100 6.0 x 80 6.0 x 100 6.0 x 120

Boxes (Driver bit included) 60150VYTX 60180VYTX 60200VYTX 80200VYTX 80225VYTX 80250VYTX 80275VYTX 80300VYTX

6.0 x 150 6.0 x 180 6.0 x 200 8.0 x 200 8.0 x 225 8.0 x 250 8.0 x 275 8.0 x 300


C2 MULTI-PURPOSE ADVANCED SCREWS

TIMBER CONSTRUCTION SCREWS

C2® MULTI-PURPOSE

Materials

Advanced screw Available in: Yellow

Zinc (CR3)

The C2 has been re-engineered around the backbone of the Classic, one of Europe’s largest selling multi-purpose screws. Using the most modern manufacturing methods and design techniques, the C2 is a revolutionary high performance multi-purpose screw. Note: Partially threaded from 70mm.

C2 CLASSIC -

Yellow

Double Countersunk with Ribs Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

3.5 x 25 3.5 x 30 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 50 4.0 x 60 4.0 x 70 4.0 x 80 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 90 5.0 x 100 6.0 x 100

6x1 6 x 11/4 8x1 8 x 11/4 8 x 11/2 8x2 8 x 21/2 8 x 23/4 8x3 10 x 11/2 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 31/2 10 x 4 10 x 4

2,000 1,800 1,700 1,500 1,200 800 600 500 400 800 600 400 375 350 300 300 225

3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 40 3.5 x 50 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 60 4.0 x 70 4.0 x 80 4.5 x 30 4.5 x 40 4.5 x 50 4.5 x 60 4.5 x 70 4.5 x 80 5.0 x 30 5.0 x 40 5.0 x 45 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 75

4 x 1/2 4 x 5/8 6 x 3/4 6x1 6 x 11/4 6 x 11/2 6x2 8x1 8 x 11/4 8 x 13/8 8 x 11/2 8 x 13/4 8x2 8 x 21/2 8 x 23/4 8x3 9 x 11/4 9 x 11/2 9x2 9 x 21/2 9 x 23/4 9x3 10 x 11/4 10 x 11/2 10 x 13/4 10 x 2 10 x 21/2 10 x 23/4 10 x 27/8

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200

Tubs (V5 bit included) 35025C2TUB 35030C2TUB 40025C2TUB 40030C2TUB 40040C2TUB 40050C2TUB 40060C2TUB 40070C2TUB 40080C2TUB 50040C2TUB 50050C2TUB 50060C2TUB 50070C2TUB 50080C2TUB 50090C2TUB 50100C2TUB 60100C2TUB

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

50080C2 50090C2 50100C2 50120C2 60050C2 60060C2 60070C2 60080C2 60090C2 60100C2 60120C2 60130C2 60150C2 60180C2 60200C2

5.0 x 80 5.0 x 90 5.0 x 100 5.0 x 120 6.0 x 50 6.0 x 60 6.0 x 70 6.0 x 80 6.0 x 90 6.0 x 100 6.0 x 120 6.0 x 130 6.0 x 150 6.0 x 180 6.0 x 200

10 x 3 10 x 31/2 10 x 4 10 x 43/4 12 x 2 12 x 21/2 12 x 23/4 12 x 3 12 x 31/2 12 x 4 12 x 43/4 12 x 51/8 12 x 6 12 x 71/4 12 x 8

200 100 100 100 200 200 200 200 100 100 100 100 100 100 100

C2 MULTI-PURPOSE -

Boxes 35012C2 35016C2 35020C2 35025C2 35030C2 35040C2 35050C2 40025C2 40030C2 40035C2 40040C2 40045C2 40050C2 40060C2 40070C2 40080C2 45030C2 45040C2 45050C2 45060C2 45070C2 45080C2 50030C2 50040C2 50045C2 50050C2 50060C2 50070C2 50075C2

Zinc (CR3)

Advanced screw

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

8 x 11/4 8 x 11/2 8x2 8 x 21/2 8x3 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 4

1,500 1,200 800 600 400 600 400 375 350 300

Tubs (V5 bit included) 40030C2ZTUB 4.0 x 30 40040C2ZTUB 4.0 x 40 40050C2ZTUB 4.0 x 50 40060C2ZTUB 4.0 x 60 40080C2ZTUB 4.0 x 80 50050C2ZTUB 5.0 x 50 50060C2ZTUB 5.0 x 60 50070C2ZTUB 5.0 x 70 50080C2ZTUB 5.0 x 80 500100C2ZTUB 5.0 x 100

9 9


C2 TRADE CASE & C2 FLOORING SCREW

TIMBER CONSTRUCTION SCREWS

C2 CLASSIC® TRADE CASE

Materials

Advanced screw Available in: Yellow

A strong metal case containing nine of the most popular C2 Screws and five V5 impact driver bits.

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

Trade Case - Qty 1,800

C2SC

C2® FLOORING & MDF

3.5 x 16 6 x 5/8 3.5 x 25 6x1 4.0 x 30 8 x 11/4 4.0 x 40 8 x 11/2 4.0 x 50 8x2 5.0 x 60 10 x 21/2 5.0 x 70 10 x 23/4 5.0 x 80 10 x 3 5.0 x 100 10 x 4 V5 Impact Driver Bits

480 350 250 350 100 65 55 100 45 5

Materials

Twin cut flooring screw Available in: Yellow

To BS

EN ISO

14592:2

008

Designed for use in man made boards such as MDF and chipboard. The C2 twin-cuts ensure a rapid pickup and reduces the likelihood of splitting whilst the steep head design with self countersinking ribs ensures a flush finish. The plain shank enables the screw to pull the two substrates together with out the need to manually clamp.

C2 FLOORING & MDF SCREW Double Countersunk with Ribs Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

Tubs (T20 driver bit included) 42055C2MDF

10

4.2 x 55

8 x 21/4

250


C2 EXTERIOR & C2 TONGUE FIX

C2® EXTERIOR

TIMBER CONSTRUCTION SCREWS Materials

Twin cut exterior screw Available in:

Exterior

To BS

EN ISO

14592:2

008

The C2 Exterior screw has been plated with a multi-layer protection system that consists of an organic top coat barrier and a zinc base layer. Designed to provide excellent additional protection against corrosion in exterior applications.

C2 EXTERIOR SCREW

Double Countersunk with Ribs Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

Tubs (V5 impact bit included) 40030C2S 40040C2S 40050C2S 40060C2S 40070C2S 50050C2S 50060C2S 50070C2S 50080C2S 50100C2S

4.0 X 30 4.0 X 40 4.0 X 50 4.0 X 60 4.0 X 70 5.0 X 50 5.0 X 60 5.0 X 70 5.0 X 80 5.0 X 100

8 x 11/4 8 x 11/2 8x2 8 x 21/2 8 x 23/4 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 4

400 350 300 200 170 180 150 120 110 80

C2® TONGUE-FIX

Materials

Twin cut flooring screw Available in: Yellow

To BS

EN ISO

14592:2

008

Specifically designed for attaching tongue and groove floorboards to flooring joists. The C2 Tongue-Fix gives a secure hidden fixture through the tongue without causing damage, allowing a flush fit with the next board.

C2 TONGUE-FIX SCREW Reduced Head Countersunk Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

Tubs (T10 driver bit included) 35045C2TG

3.5 x 45

6 x 13/4

350

11


CLASSIC MULTI-PURPOSE SCREWS

TIMBER CONSTRUCTION SCREWS

CLASSIC

Materials

Single cut multi-purpose screw Available in: Yellow

Zinc (CR3)

Nickel

Black Pass.

A2/Aust. SS

Specifically designed as a multi-purpose product, the 25° sharp point, the new type 17 slash, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

CLASSIC -

Yellow

Double Countersunk

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

3.0 x 12 3.0 x 16 3.0 x 20 3.0 x 25 3.0 x 30 3.0 x 35 3.0 x 40 3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 45 3.5 x 50 4.0 x 12 4.0 x 16 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 55 4.0 x 60

4 x 1/2 4 x 5/8 4 x 3/4 4x1 4 x 11/4 4 x 13/8 4 x 11/2 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 11/4 6 x 13/8 6 x 11/2 6 x 13/4 6x2 8 x 1/2 8 x 5/8 8 x 3/4 8x1 8 x 1 1/4 8 x 13/8 8 x 11/2 8 x 13/4 8x2 8 x 23/8 8 x 21/2

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200

Boxes 30012CLAF 30016CLAF 30020CLAF 30025CLAF 30030CLAF 30035CLAF 30040CLAF 35012CLAF 35016CLAF 35020CLAF 35025CLAF 35030CLAF 35035CLAF 35040CLAF 35045CLAF 35050CLAF 40012CLAF 40016CLAF 40020CLAF 40025CLAF 40030CLAF 40035CLAF 40040CLAF 40045CLAF 40050CLAF 40055CLAF 40060CLAF

12

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

40070CLAF 40080CLAF 45016CLAF 45020CLAF 45025CLAF 45030CLAF 45035CLAF 45040CLAF 45045CLAF 45050CLAF 45055CLAF 45060CLAF 45070CLAF 45080CLAF 50020CLAF 50025CLAF 50030CLAF 50035CLAF 50040CLAF 50045CLAF 50050CLAF 50055CLAF 50060CLAF 50070CLAF 50075CLAF 50080CLAF 50090CLAF 50100CLAF 50120CLAF 60040CLAF 60045CLAF 60050CLAF 60060CLAF 60070CLAF 60080CLAF 60090CLAF 60100CLAF 60120CLAF 60130CLAF 60150CLAF 60180CLAF 60200CLAF

4.0 x 70 4.0 x 80 4.5 x 16 4.5 x 20 4.5 x 25 4.5 x 30 4.5 x 35 4.5 x 40 4.5 x 45 4.5 x 50 4.5 x 55 4.5 x 60 4.5 x 70 4.5 x 80 5.0 x 20 5.0 x 25 5.0 x 30 5.0 x 35 5.0 x 40 5.0 x 45 5.0 x 50 5.0 x 55 5.0 x 60 5.0 x 70 5.0 x 75 5.0 x 80 5.0 x 90 5.0 x 100 5.0 x 120 6.0 x 40 6.0 x 45 6.0 x 50 6.0 x 60 6.0 x 70 6.0 x 80 6.0 x 90 6.0 x 100 6.0 x 120 6.0 x 130 6.0 x 150 6.0 x 180 6.0 x 200

8 x 23/4 8x3 9 x 5/8 9 x 3/4 9x1 9 x 11/4 9 x 13/8 9 x 11/2 9 x 13/4 9x2 9 x 23/8 9 x 21/2 9 x 23/4 9x3 10 x 3/4 10 x 1 10 x 11/4 10 x 13/8 10 x 11/2 10 x 13/4 10 x 2 10 x 23/8 10 x 21/2 10 x 23/4 10 x 27/8 10 x 3 10 x 31/2 10 x 4 10 x 43/4 12 x 11/2 12 x 13/4 12 x 2 12 x 21/2 12 x 23/4 12 x 3 12 x 31/2 12 x 4 12 x 43/4 12 x 51/8 12 x 6 12 x 71/4 12 x 8

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 200 200 200 200 200 200 100 100 100 100 100 100 100


CLASSIC MULTI-PURPOSE SCREWS CLASSIC PAN HEAD -

TIMBER CONSTRUCTION SCREWS

CLASSIC -

Yellow

Pan Head

Zinc (CR3)

Double Countersunk

The Classic multi-purpose screw with pan head for extra clamping.

The Classic multi-purpose screw plated in zinc.

Product Code

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 4.0 x 16 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 50 5.0 x 30 5.0 x 50

6 x 1/2 6 x 5/8 6 x 3/4 6x1 8 x 5/8 8 x 3/4 8x1 8 x 11/4 8 x 13/8 8 x 11/2 8x2 10 x 11/4 10 x 2

200 200 200 200 200 200 200 200 200 200 200 200 200

Boxes

Size (Metric)

Size (Imp. equiv.)

Qty

3.0 x 12 3.0 x 16 3.0 x 20 3.0 x 25 3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 50 4.0 x 16 4.0 x 20 4.0 X 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 55 4.0 x 60 4.0 x 70 4.5 x 30 4.5 x 40 4.5 x 50 4.5 x 70 5.0 x 25 5.0 x 30 5.0 x 35 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 90 5.0 x 100 6.0 x 40 6.0 x 50 6.0 x 70 6.0 x 80 6.0 x 100

4 x 1/2 4 x 5/8 4 x 3/4 4x1 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 11/4 6 x 13/8 6 x 11/2 6x2 8 x 5/8 8 x 3/4 8X1 8 x 11/4 8 x 13/8 8 x 11/2 8 x 13/4 8x2 8 x 23/8 8 x 21/2 8 x 23/4 9 x 11/4 9 x 11/2 9x2 9 x 23/4 10 x 1 10 x 11/4 10 x 13/8 10 x 1 1/2 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 31/2 10 x 4 12 x 11/2 12 x 2 12 x 23/4 12 x 3 12 x 4

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 200 200 100

Boxes

35012CLAP 35016CLAP 35020CLAP 35025CLAP 40016CLAP 40020CLAP 40025CLAP 40030CLAP 40035CLAP 40040CLAP 40050CLAP 50030CLAP 50050CLAP

CLASSIC HINGE SCREW -

Yellow

Nickel

Classic multi-purpose screw with a reduced 5mm head for specific use in continuous/piano hinges.

CLASSIC HINGE SCREW -

Yellow

5mm Reduced Head

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

3.0 x 12 3.0 x 16 3.0 x 20 3.0 x 25

4 x 1/2 4 x 5/8 4 x 3/4 4x1

200 200 200 200

Boxes 30012CLAH 30016CLAH 30020CLAH 30025CLAH

CLASSIC HINGE SCREW 5mm Reduced Head

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

3.0 x 12 3.0 x 16 3.0 x 20

4 x 1/2 4 x 5/8 4 x 3/4

200 200 200

Nickel

30012CLAZ 30016CLAZ 30020CLAZ 30025CLAZ 35012CLAZ 35016CLAZ 35020CLAZ 35025CLAZ 35030CLAZ 35035CLAZ 35040CLAZ 35050CLAZ 40016CLAZ 40020CLAZ 40025CLAZ 40030CLAZ 40035CLAZ 40040CLAZ 40045CLAZ 40050CLAZ 40055CLAZ 40060CLAZ 40070CLAZ 45030CLAZ 45040CLAZ 45050CLAZ 45070CLAZ 50025CLAZ 50030CLAZ 50035CLAZ 50040CLAZ 50050CLAZ 50060CLAZ 50070CLAZ 50080CLAZ 50090CLAZ 50100CLAZ 60040CLAZ 60050CLAZ 60070CLAZ 60080CLAZ 60100CLAZ

Boxes 30012CLAHN 30016CLAHN 30020CLAHN

13


CLASSIC MULTI-PURPOSE SCREWS

TIMBER CONSTRUCTION SCREWS

CLASSIC -

A2/Aust. SS

Product Code

Double Countersunk

Size (Metric)

Size (Imp. equiv.)

Qty

3.5 x 30 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100

6 x 11/4 8x1 8 x 11/4 8 x 11/2 8x2 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 4

30 25 20 15 14 10 8 7 6 4

Packs

The Classic multi-purpose screw in stainless steel for added corrosion resistance. Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

3.0 x 12 3.0 x 16 3.0 x 20 3.0 x 25 3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 50 4.0 x 16 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 60 4.0 x 70 4.5 x 25 4.5 x 30 4.5 x 40 4.5 x 50 4.5 x 60 5.0 x 25 5.0 x 30 5.0 x 35 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 90 5.0 x 100 6.0 x 40 6.0 x 50 6.0 x 60 6.0 x 70 6.0 x 80 6.0 x 100 6.0 x 130 6.0 x 150

4 x 1/2 4 x 5/8 4 x 3/4 4x1 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 1 1/4 6 x 1 3/8 6 x 1 1/2 6x2 8 x 5/8 8 x 3/4 8x1 8 x 1 1/4 8 x 1 3/8 8 x 1 1/2 8 x 1 3/4 8x2 8 x 2 1/2 8 x 2 3/4 9 x 5/8 9 x 1 1/4 9 x 1 1/2 9x2 9 x 2 1/2 10 x 1 10 x 1 1/4 10 x 1 3/8 10 x 1 1/2 10 x 2 10 x 2 1/2 10 x 2 3/4 10 x 3 10 x 3 1/2 10 x 4 12 x 1 1/2 12 x 2 12 x 2 1/2 12 x 2 3/4 12 x 3 12 x 4 12 x 5 12 x 6

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 200 200 200 100 100 100

Boxes 30012CLASS 30016CLASS 30020CLASS 30025CLASS 35012CLASS 35016CLASS 35020CLASS 35025CLASS 35030CLASS 35035CLASS 35040CLASS 35050CLASS 40016CLASS 40020CLASS 40025CLASS 40030CLASS 40035CLASS 40040CLASS 40045CLASS 40050CLASS 40060CLASS 40070CLASS 45025CLASS 45030CLASS 45040CLASS 45050CLASS 45060CLASS 50025CLASS 50030CLASS 50035CLASS 50040CLASS 50050CLASS 50060CLASS 50070CLASS 50080CLASS 50090CLASS 50100CLASS 60040CLASS 60050CLASS 60060CLASS 60070CLASS 60080CLASS 60100CLASS 60130CLASS 60150CLASS

14

35030CHSSP 40025CHSSP 40030CHSSP 40040CHSSP 40050CHSSP 50050CHSSP 50060CHSSP 50070CHSSP 50080CHSSP 50100CHSSP

CLASSIC -

Black Pass.

Double Countersunk

The Classic multi-purpose screw in black passivated. Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

3.5 x 16 3.5 x 25 4.0 x 25 4.0 x 30 4.0 x 40 4.5 x 30 5.0 x 30 5.0 x 40

6 x 5/8 6x1 8x1 8 x 11/4 8 x 11/2 9 x 11/4 10 x 11/4 10 x 11/2

200 200 200 200 200 200 200 200

Boxes 35016CLAB 35025CLAB 40025CLAB 40030CLAB 40040CLAB 45030CLAB 50030CLAB 50040CLAB


SOLO WOODSCREWS

TIMBER CONSTRUCTION SCREWS

SOLO

Materials

Single threaded woodscrew Available in:

Yellow

Zinc (CR3)

To BS

EN ISO

14592:2

008

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with a plastic plug.

SOLO -

Yellow

Double Countersunk Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

3.5 x 25 3.5 x 30 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100

6x1 6 x 11/4 8x1 8 x 11/4 8 x 11/2 8x2 10 x 11/2 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 4

2,000 1,800 1,700 1,250 1,000 800 800 525 400 375 325 250

3.0 x 12 3.0 x 15 3.0 x 17 3.0 x 20 3.0 x 25 3.0 x 30 3.5 x 12 3.5 x 15 3.5 x 17 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 50 4.0 x 15 4.0 x 17 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 60 4.0 x 70 4.5 x 20 4.5 x 30 4.5 x 35 4.5 x 40 4.5 x 45

4 x 1/2 4 x 5/8 4 x 43/64 4 x 3/4 4x1 4 x 11/4 6 x 1/2 6 x 5/8 6 x 43/64 6 x 3/4 6x1 6 x 11/4 6 x 13/8 6 x 11/2 6x2 8 x 5/8 8 x 43/64 8 x 3/4 8x1 8 x 11/4 8 x 13/8 8 x 11/2 8 x 13/4 8x2 8 x 21/2 8 x 23/4 9 x 3/4 9 x 11/4 9 x 13/8 9 x 11/2 9 x 13/4

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200

Tubs 35025STUBY 35030STUBY 40025STUBY 40030STUBY 40040STUBY 40050STUBY 50040STUBY 50050STUBY 50060STUBY 50070STUBY 50080STUBY 50100STUBY

Boxes 30012SOLOC 30015SOLOC 30017SOLOC 30020SOLOC 30025SOLOC 30030SOLOC 35012SOLOC 35015SOLOC 35017SOLOC 35020SOLOC 35025SOLOC 35030SOLOC 35035SOLOC 35040SOLOC 35050SOLOC 40015SOLOC 40017SOLOC 40020SOLOC 40025SOLOC 40030SOLOC 40035SOLOC 40040SOLOC 40045SOLOC 40050SOLOC 40060SOLOC 40070SOLOC 45020SOLOC 45030SOLOC 45035SOLOC 45040SOLOC 45045SOLOC

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

45050SOLOC 45060SOLOC 45070SOLOC 45080SOLOC 50025SOLOC 50030SOLOC 50035SOLOC 50040SOLOC 50045SOLOC 50050SOLOC 50060SOLOC 50070SOLOC 50075SOLOC 50080SOLOC 50090SOLOC 50100SOLOC 60040SOLOC 60050SOLOC 60060SOLOC 60070SOLOC 60080SOLOC 60090SOLOC 60100SOLOC 60120SOLOC 60130SOLOC 60150SOLOC

4.5 x 50 4.5 x 60 4.5 x 70 4.5 x 80 5.0 x 25 5.0 x 30 5.0 x 35 5.0 x 40 5.0 x 45 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 75 5.0 x 80 5.0 x 90 5.0 x 100 6.0 x 40 6.0 x 50 6.0 x 60 6.0 x 70 6.0 x 80 6.0 x 90 6.0 x 100 6.0 x 120 6.0 x 130 6.0 x 150

9x2 9 x 21/2 9 x 23/4 9x3 10 x 1 10 x 11/4 10 x 13/8 10 x 11/2 10 x 13/4 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 3 10 x 31/2 10 x 4 12 x 11/2 12 x 2 12 x 21/2 12 x 23/4 12 x 3 12 x 31/2 12 x 4 12 x 43/4 12 x 51/8 12 x 6

200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 200 200 200 100 100 100 100 100

3.5 x 15 3.5 x 30 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 50 4.0 x 60 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100 6.0 x 80 6.0 x 120 6.0 x 150

6 x 5/8 6 x 1 1/4 8x1 8 x 1 1/4 8 x 1 3/8 8 x 1 1/2 8x2 8 x 2 1/2 10 x 1 1/2 10 x 2 10 x 2 1/2 10 x 2 3/4 10 x 3 10 x 4 12 x 3 12 x 4 3/4 12 x 6

750 500 470 430 380 350 280 230 230 180 160 140 120 90 90 50 35

Bags 35015CHYB 35030CHYB 40025CHYB 40030CHYB 40035CHYB 40040CHYB 40050CHYB 40060CHYB 50040CHYB 50050CHYB 50060CHYB 50070CHYB 50080CHYB 50100CHYB 60080CHYB 60120CHYB 60150CHYB

15


SOLO WOODSCREWS

TIMBER CONSTRUCTION SCREWS

SOLO -

Yellow

Double Countersunk

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

3.5 x 15 3.5 x 30 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 50 4.0 x 60 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100 6.0 x 80 6.0 x 120 6.0 x 150

6 x 5/8 6 x 1 1/4 8x1 8 x 1 1/4 8 x 1 3/8 8 x 1 1/2 8x2 8 x 2 1/2 10 x 1 1/2 10 x 2 10 x 2 1/2 10 x 2 3/4 10 x 3 10 x 4 12 x 3 12 x 4 3/4 12 x 6

45 35 30 25 22 20 16 12 10 12 10 8 6 4 4 2 2

Packs 35015CHYP 35030CHYP 40025CHYP 40030CHYP 40035CHYP 40040CHYP 40050CHYP 40060CHYP 50040CHYP 50050CHYP 50060CHYP 50070CHYP 50080CHYP 50100CHYP 60080CHYP 60120CHYP 60150CHYP

SOLO -

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

40050SOLOZ 40060SOLOZ 40070SOLOZ 40080SOLOZ 45040SOLOZ 45050SOLOZ 45060SOLOZ 45070SOLOZ 45080SOLOZ 50025SOLOZ 50030SOLOZ 50040SOLOZ 50045SOLOZ 50050SOLOZ 50060SOLOZ 50070SOLOZ 50080SOLOZ 50090SOLOZ 50100SOLOZ 60050SOLOZ 60060SOLOZ 60080SOLOZ 60100SOLOZ 60120SOLOZ 60150SOLOZ

4.0 x 50 4.0 x 60 4.0 x 70 4.0 x 80 4.5 x 40 4.5 x 50 4.5 x 60 4.5 x 70 4.5 x 80 5.0 x 25 5.0 x 30 5.0 x 40 5.0 x 45 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 90 5.0 x 100 6.0 x 50 6.0 x 60 6.0 x 80 6.0 x 100 6.0 x 120 6.0 x 150

8x2 8 x 21/2 8 x 23/4 8x3 9 x 11/2 9x2 9 x 21/2 9 x 23/4 9x3 10 x 1 10 x 11/4 10 x 11/2 10 x 13/4 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 31/2 10 x 4 12 x 2 12 x 21/2 12 x 3 12 x 43/4 12 x 51/8 12 x 6

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 200 100 100 100

SOLO SQUARE RECESS -

Zinc

Double Countersunk

Zinc (CR3)

Double Countersunk

Product Code

Size (Metric)

Size (Imp. equiv.)

Product Code Qty

Tubs 40030STUBZ 40040STUBZ 40050STUBZ 50050STUBZ 50060STUBZ 50070STUBZ 50080STUBZ 50100STUBZ

4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100

8 x 11/4 8 x 11/2 8x2 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 4

1,250 1,000 800 525 400 375 325 250

3.0 x 12 3.0 x 15 3.5 x 15 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 50 4.0 x 15 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45

4 x 1/2 4 x 5/8 6 x 5/8 6 x 3/4 6x1 6 x 11/4 6 x 13/8 6 x 11/2 6x2 8 x 5/8 8 x 3/4 8x1 8 x 11/4 8 x 13/8 8 x 11/2 8 x 13/4

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200

16

Size (Imp. equiv.)

Qty

4.0 x 20 4.0 x 25 4.0 x 40 5.0 x 40 5.0 x 50 5.0 x 80

8 x 3/4 8x1 8 x 11/2 10 x 11/2 10 x 2 10 x 3

200 200 200 200 200 200

Boxes 40020SQSZ 40025SQSZ 40040SQSZ 50040SQSZ 50050SQSZ 50080SQSZ

SOLO SQUARE RECESS -

Boxes 30012SOLOZ 30015SOLOZ 35015SOLOZ 35020SOLOZ 35025SOLOZ 35030SOLOZ 35035SOLOZ 35040SOLOZ 35050SOLOZ 40015SOLOZ 40020SOLOZ 40025SOLOZ 40030SOLOZ 40035SOLOZ 40040SOLOZ 40045SOLOZ

Size (Metric)

Pan Head

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

4.0 x 20 4.0 x 25 4.0 x 40 5.0 x 40

8 x 3/4 8x1 8 x 11/2 10 x 11/2

200 200 200 200

Boxes 40020SQPSZ 40025SQPSZ 40040SQPSZ 50040SQPSZ

Zinc


TWIN-THREADED WOODSCREWS

TIMBER CONSTRUCTION SCREWS

TWIN-THREADED

Materials

Woodscrew

Available in: Zinc (CR3) To BS

EN ISO

14592:2

008

A traditional sharp point screw with a twin-thread for a fast installation, mainly used in soft timber applications or into masonry with a plastic plug.

TWIN-THREADED Double Countersunk Product Code

Size (Imp.)

Size (Metric)

Qty

4 x 1/2 4 x 5/8 4 x 3/4 4x1 5 x 5/8 5 x 3/4 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 1 1/4 6 x 1 1/2 6 x 1 3/4 6x2 7 x 5/8 7 x 3/4 7x1 7 x 11/4 7 x 11/2 8 x 1/2 8 x 5/8 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8 x 13/4 8x2 8 x 21/4 8 x 21/2 8x3 8x3 10 x 3/4 10 x 1 10 x 11/4 10 x 11/2 10 x 13/4 10 x 2 10 x 21/4 10 x 21/2 10 x 3 10 x 3 10 x 31/2

3.0 x 12 3.0 x 16 3.0 x 20 3.0 x 25 3.3 x 16 3.3 x 19 3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 40 3.5 x 45 3.5 x 50 3.9 x 16 3.9 x 20 3.9 x 25 3.9 x 30 3.9 x 40 4.0 x 12 4.0 x 16 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 55 4.0 x 60 4.0 x 75 4.0 x 75 5.0 x 20 5.0 x 25 5.0 x 30 5.0 x 40 5.0 x 45 5.0 x 50 5.0 x 55 5.0 x 60 5.0 x 75 5.0 x 75 5.0 x 90

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 200 200 200 200 200 200 200 200 100 100

Boxes 00412CWZ 00458CWZ 00434CWZ 00041CWZ 00558CWZ 00534CWZ 00612CWZ 00658CWZ 00634CWZ 00061CWZ 06114CWZ 06112CWZ 06134CWZ 00062CWZ 00758CWZ 00734CWZ 00071CWZ 07114CWZ 07112CWZ 00812CWZ 00858CWZ 00834CWZ 00081CWZ 08114CWZ 08112CWZ 08134CWZ 00082CWZ 08214CWZ 08212CWZ 00083CWZ 00083CWZ100 01034CWZ 00101CWZ 10114CWZ 10112CWZ 10134CWZ 00102CWZ 10214CWZ 10212CWZ 00103CWZ 00103CWZ100 10312CWZ

Product Code 00104CWZ 00121CWZ 12114CWZ 12112CWZ 00122CWZ 12212CWZ 00123CWZ 00123CWZ100 12312CWZ 00124CWZ

Size (Imp.)

Size (Metric)

Qty

10 x 4 12 x 1 12 x 11/4 12 x 11/2 12 x 2 12 x 21/2 12 x 3 12 x 3 12 x 31/2 12 x 4

5.0 x 100 6.0 x 25 6.0 x 30 6.0 x 40 6.0 x 50 6.0 x 60 6.0 x 75 6.0 x 75 6.0 x 90 6.0 x 100

100 200 200 200 200 200 200 100 100 100

6 x 5/8 6 x 3/4 6x1 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8x2 8 x 21/2 8x3 10 x 11/2 10 x 2 10 x 21/2 10 x 3 10 x 4

3.5 x 15 3.5 x 20 3.5 x 25 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 50 4.0 x 60 4.0 x 80 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 80 5.0 x 100

700 620 500 540 470 390 350 270 200 180 250 190 160 140 90

6 x 5/8 6 x 3/4 6x1 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8x2 8 x 21/2 8x3 10 x 11/2 10 x 2 10 x 21/2 10 x 3 10 x 4

3.5 x 15 3.5 x 20 3.5 x 25 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 50 4.0 x 60 4.0 x 80 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 80 5.0 x 100

45 40 35 35 30 25 20 16 12 10 15 12 10 8 6

Bags 00658CWZB 00634CWZB 00061CWZB 00834CWZB 00081CWZB 08114CWZB 08112CWZB 00082CWZB 08212CWZB 00083CWZB 10112CWZB 00102CWZB 10212CWZB 00103CWZB 00104CWZB

Packs 00658CWZP 00634CWZP 00061CWZP 00834CWZP 00081CWZP 08114CWZP 08112CWZP 00082CWZP 08212CWZP 00083CWZP 10112CWZP 00102CWZP 10212CWZP 00103CWZP 00104CWZP

17


TWIN-THREADED & BLACKJAX SCREWS

TIMBER CONSTRUCTION SCREWS

ROUNDHEAD TWIN-THREADED

Materials

Woodscrew

Available in: Zinc (CR3)

To BS

EN ISO

14592:2

008

A traditional sharp point screw with a twin-thread for a fast installation, mainly used in soft timber applications or into masonry with a plastic plug.

TWIN-THREADED Roundhead Product Code

Size (Imp.)

Size (Metric)

Qty

Product Code

4 x 1/2 4 x 5/8 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 11/4 8 x 1/2 8 x 5/8 8 x 3/4 8x1

3.0 x 12 3.0 x 16 3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 4.0 x 12 4.0 x 16 4.0 x 20 4.0 x 25

200 200 200 200 200 200 200 200 200 200 200

08114CRWZ 08112CRWZ 00082CRWZ 00101CRWZ 10114CRWZ 10112CRWZ 00102CRWZ 10212CRWZ 00103CRWZ 12112CRWZ 00122CRWZ

Boxes

Size (Imp.)

Size (Metric)

Qty

8 x 11/4 8 x 11/2 8x2 10 x 1 10 x 11/4 10 x 11/2 10 x 2 10 x 21/2 10 x 3 12 x 11/2 12 x 2

4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 25 5.0 x 30 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 75 6.0 x 40 6.0 x 50

200 200 200 200 200 200 200 200 200 200 200

Boxes

00412CRWZ 00458CRWZ 00612CRWZ 00658CRWZ 00634CRWZ 00061CRWZ 06114CRWZ 00812CRWZ 00858CRWZ 00834CRWZ 00081CRWZ

BLACKJAX

Materials

Roundhead woodscrew Available in: Black Phos.

To BS

EN ISO

14592:2

008

A twin-threaded wood screw with a black japanned finish designed to be used with black ironmongery.

BLACKJAX Roundhead Product Code

Size (Imp.)

Size (Metric)

Qty

6 x 5/8 6 x 3/4 6x1 8 x 5/8 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8x2 10 x 1 10 x 11/4 10 x 11/2 10 x 2

3.5 x 16 3.5 x 20 3.5 x 25 4.0 x 16 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 25 5.0 x 30 5.0 x 40 5.0 x 50

200 200 200 200 200 200 200 200 200 200 200 200 200

Boxes 00658BJC 00634BJC 00061BJC 00858BJC 00834BJC 00081BJC 08114BJC 08112BJC 00082BJC 00101BJC 10114BJC 10112BJC 00102BJC

18

Product Code

Size (Imp.)

Size (Metric)

Qty

6x1 8x1 8 x 1 1/2 10 x 1 1/2

3.5 x 25 4.0 x 25 4.0 x 40 5.0 x 40

45 40 35 35

Packs 00061BJCP 00081BJCP 08112BJCP 10112BJCP


CARCASS, MIRROR SCREWS & CAPS

TIMBER CONSTRUCTION SCREWS

CARCASS SCREWS

Materials

Woodscrew

Available in: Black Phos.

Designed for construction of furniture carcasses.

CARCASS SCREWS Countersunk Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

4.0 x 33 4.0 x 45

7 x 11/4 7 x 13/4

500 500

Boxes 40033CARC 40045CARC

MIRROR SCREWS

PLASTIDOME SCREW CAPS

Dome head

Two piece cap and washer which provides a decorative finish and a protective cap.

For hanging a mirror where an aesthetic finish is required. Product Code

Screw Size (Imp.)

Finish

Qty

Packs 08114CMIRP 08112CMIRP

8 x 11/4 8 x 11/2

Chrome Chrome

10 8

8x1 8 x 11/4 8 x 11/2 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8x2

Chrome Chrome Chrome Polished Brass Polished Brass Polished Brass Polished Brass Polished Brass

200 200 200 200 200 200 200 200

Boxes 00081CMIR200 08114CMIR200 08112CMIR200 00834BMIR200 00081BMIR200 08114BMIR200 08112BMIR200 00082BMIR200

HINGED COVER CAPS

Finish

Qty

3.5 - 4.2 3.5 - 4.2 3.5 - 4.2 3.5 - 4.2

White Chrome Brown Black

100 100 100 100

SCREW CUPS A surface screw cup designed to allow the head of the screw to sit proud giving a decorative finish.

To Fit (mm)

Finish

Qty

6 8 10 6 8 10

Brass Brass Brass Nickel Nickel Nickel

60 55 50 60 55 50

Packs

To Fit (mm)

Colour

Qty

3.5 - 5 3.5 - 5 5 - 10 5 - 10

White Black White Black

100 100 50 50

Bags SHCCWHITEP SHCCBLACKP LHCCWHITEP LHCCBLACKP

To Fit (mm)

Bags WHITEPLAST CHROMEPLAST BROWNPLAST BLACKPLAST

Product Code

For cosmetic use to conceal screws. Product Code

Product Code

6BCUPP 8BCUPP 10BCUPP 6NCUPP 8NCUPP 10NCUPP

19


MIXED TRAYS & MIXED PACKS

TIMBER CONSTRUCTION SCREWS

MIXED TRAYS - ASSORTED SIZES Classic / Twin-Threaded / Self-Tapping

Product Code CLASSIC TRAY STST TRAY WOOD TRAY STS TRAY

895

Qty

Classic Yellow Classic A2 Stainless Steel Zinc Twin-Threaded Zinc Self-Tapper

895 895 1,140 1,305

895

pcs

1140

pcs

Classic® A2 SS

3.5 x 16mm

4.0 x 40mm

3.5 x 16mm

4.0 x 40mm

8 x 11/4

6 x 1/2

200 pcs

70 pcs

200 pcs

70 pcs

85 pcs

180 pcs

3.5 x 25mm

4.0 x 50mm

3.5 x 25mm

4.0 x 50mm

6 x 3/4

8 x 11/2

100 pcs

60 pcs

100 pcs

60 pcs

130 pcs

65 pcs

3.5 x 30mm

4.0 x 60mm

3.5 x 30mm

4.0 x 60mm

100 pcs

50 pcs

100 pcs

50 pcs

4.0 x 20mm

5.0 x 40mm

4.0 x 20mm

5.0 x 40mm

30 pcs

100 pcs

30 pcs

4.0 x 25mm

5.0 x 50mm

4.0 x 25mm

5.0 x 50mm

10 x 21/2

6 x 1/2

60 pcs

40 pcs

60 pcs

40 pcs

35 pcs

190 pcs

4.0 x 30mm

5.0 x 60mm

4.0 x 30mm

5.0 x 60mm

8x1

8x2

50 pcs

35 pcs

50 pcs

35 pcs

60 pcs

50 pcs

A boxed assortment of popular sizes sold together for your convenience.

1400 psc

pcs

Twin-Threaded

MIXED PACKS - ASSORTED SIZES

Classic® Yellow

1305

pcs

Classic® Yellow

100 pcs

20

Description

Solo Yellow

Self-Tapping

10 x 2

6x1

35 pcs

100 pcs

8 x 3/4

100 pcs

8 x 1/2

8 x 1/2

180 pcs

100 pcs 8x1

6 x 1/4

50 pcs

100 pcs

10 x 1/2

120 pcs

6 x 11/4

8 x 11/2

110 pcs

45 pcs

8x1

80 pcs

8 x 3/4

6 x 3/4

115 pcs

140 pcs

6 x 1/2

8 x 3/4

165 pcs

140 pcs

Product Code

Description

Qty

CLAFMP SOLOMP CWZMP

Classic Multi-Purpose Screws Solo Chipboard Screws Twin-Threaded Woodscrews

1,400 1,400 1,400

1400

10 x 5/8

70 pcs

psc

Twin-Threaded

1400 psc

Size (Metric)

Qty

Size (Metric)

Qty

Size (Imperial)

Qty

3.5 x 25 4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100

200 200 200 200 200 100 100 100 100

3.5 x 25 4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100

200 200 200 200 200 100 100 100 100

8x1 8 x 11/4 8 x 11/2 8x2 8 x 21/2 10 x 11/2 10 x 2 10 x 3 10 x 4

200 200 200 200 200 100 100 100 100


DECKING SCREWS

TIMBER CONSTRUCTION SCREWS

DECKING SCREWS

Materials

For decking platforms Available in:

C2 DECKING SCREW -

Exterior

To BS

A2/Aust. SS

EN ISO

14592:2

008

Exterior

Double Countersunk

A premium decking screw using the C2 twin cut technology. Coated with a patented multi-layer corrosion resistant plating to withstand up to 1000 hrs in a salt spray cabinet. This new and innovative design enables the screw to rapidly penetrate the timber, cleanly countersink and securely clamp the decking board to the joists. Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

4.5 x 50 4.5 x 65 4.5 x 75 4.5 x 65

9x2 9 x 21/2 9 x 27/8 9 x 21/2

250 250 250 1000

Tubs 50C2D250 65C2D250 75C2D250 65C2D1000

CLASSIC DECKING SCREW A2/Aust. SS

SOLO DECKING SCREW

- Double Countersunk

Exterior

- Double Countersunk

Used for attaching decking board to a timber substrate. Coated with a patented multi-layer corrosion resistant plating this screw is ideal for outdoor applications.

An economic but highly effective softwood decking screw. Plated to withstand up to 500 hrs in a salt spray cabinet and designed to give a rapid installation and a secure fixing.

Product Code

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

4.5 x 50 4.5 x 65

9x2 9 x 21/2

250 250

Tubs 50DEXSS250 65DEXSS250

Size (Metric)

Size (Imp. equiv.)

Qty

4.5 x 50 4.5 x 60 4.5 x 70

9x2 9 x 21/2 9 x 23/4

200 200 200

4.5 x 60

9 x 21/2

1000

Boxes 50SOLOD200 60SOLOD200 70SOLOD200

Tubs 60SOLOD1000

21


IN-DEX TIMBER SCREWS

TIMBER CONSTRUCTION SCREWS

IN-DEX TIMBER SCREWS For timber constructions Available in:

Exterior

A4 SS

To BS

A2/Aust. SS

EN ISO

14592:2

008

Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Coated with a patented multi-layer corrosion resistant plating this screw is ideal for outdoor applications. Also available with a wafer head for improved clamping or a low profile finish.

HEX HEAD -

WAFER HEAD -

Exterior

8mm Hex Head

Size

Product Code

T30/T40 Recess

A/F

Qty

6.7 x 60 6.7 x 75 6.7 x 87 6.7 x 100 6.7 x 125 6.7 x 150 6.7 x 200 6.7 x 250

8 8 8 8 8 8 8 8

50 50 50 50 50 50 50 50

6.7 x 100 6.7 x 150 6.7 x 200

8 8 8

50 30 20

(Metric)

Exterior

Boxes

Size

Product Code

(Metric)

Bit Type

Qty

Boxes (T30 & T40 bit included)

60IN 75IN 87IN 100IN 125IN 150IN 200IN 250IN

Bags 100INDEXTB 150INDEXTB 200INDEXTB

Packs 100INDEXP 150INDEXP

6.7 x 100 6.7 x 150

HEX HEAD -

8 8

6 4

95INW 125INW 150INW 175INW 200INW 225INW 250INW 275INW 300INW 350INW 400INW

6.7 x 95 6.7 x 125 6.7 x 150 6.7 x 175

8mm Hex Head

50 50 50 50

50 50 50 25 25 25 25

6.7 x 95 6.7 x 125 6.7 x 150

T30 T30 T30

50 30 20

6.7 x 95 6.7 x 125 6.7 x 150

T30 T30 T30

6 5 4

Bags 95INDEXWB 125INDEXWB 150INDEXWB

Packs 95INDEXWP 125INDEXWP 150INDEXWP

A4 SS

8.0 x 200 8.0 x 225 8.0 x 250 8.0 x 275 8.0 x 300 8.0 x 350 8.0 x 400

T30 T30 T30 T30 T40 T40 T40 T40 T40 T40 T40

WAFER HEAD -

A2/Aust. SS

T40 Recess Product Code

Size (Metric)

A/F

Qty

8 8 8 8

25 25 25 25

Telescopic Tubes 75INDEXSST 100INDEXSST 125INDEXSST 150INDEXSST

6.7 x 75 6.7 x 100 6.7 x 125 6.7 x 150

Product Code

Bit Type

Qty

T40

25

Boxes (Driver Bit Included) 80INDEXWSS

22

Size (Metric)

8.0 x 80


IN-DEX SCREWS & CARRIAGE BOLTS

TIMBER CONSTRUCTION SCREWS

HEAVY DUTY TIMBER SCREWS For heavy duty timber constructions Available in:

To BS

Exterior

EN ISO

14592:2

008

The heavy duty in-dex screw dramatically decreases installation time as it doesn’t require a pilot hole into most wood types and can be installed with a power tool. Coated with patented multi-layer corrosion resistant plating to achieve 1,000 hours salt spray test. This screw is ideal for outdoor applications or where extra strength is required.

HEX HEAD -

Exterior

10mm Hex Head Product Code

Size (Metric)

A/F

Qty

10 10 10 10 13 13 13

10 10 10 10 10 10 10

Bags (Socket driver Included) 875INH 8100INH 8150INH 8200INH 10100INH 10150INH 10200INH

8.0 x 75 8.0 x 100 8.0 x 150 8.0 x 200 10.0 x 100 10.0 x 150 10.0 x 200

COACH SCREWS

CARRIAGE BOLTS

Exterior woodscrew Available in:

Exterior bolt & nut

Exterior

Available in: To BS

EN ISO

Exterior To BS

14592:2

008

A traditional way of fastening timber applications, but has the added advantage of a corrosion resistant plating finish for external applications. Product Code

Size (Metric)

A/F

Qty

10 10 10 13 13 13 13 17 17 17

10 10 10 10 10 10 10 10 10 10

Bags 640INCSB 650INCSB 675INCSB 850INCSB 875INCSB 8100INCSB 8120INCSB 10100INCSB 10130INCSB 10150INCSB

EN ISO

14592:2

008

A heavy duty bolt used for fastening timbers. It has an impact resistant dome head and the square under the head locks into the timber to stop the bolt from spinning. Product Code

Size (Metric)

A/F

Qty

Bags 6 x 40 6 x 50 6 x 75 8 x 50 8 x 75 8 x 100 8 x 120 10 x 100 10 x 130 10 x 150

10100INCB 10150INCB 10160INCB 10200INCB 10220INCB

10 x 100 10 x 150 10 x 160 10 x 200 10 x 220

17 17 17 17 17

10 10 10 10 10

23


COACH SCREWS & NYLON PLUGS

TIMBER CONSTRUCTION SCREWS

COACH SCREWS

Materials *

Used in wood & brick (with nylon plugs) Available in:

Zinc (CR3)

To BS

EN ISO

14592:2

008

A traditional heavy duty woodscrew used for timber to timber applications, attaching ironmongery to timber and into masonry with a nylon plug. Product Code

Thread x Length

A/F

(mm)

(mm)

Qty

Boxes 0625CSC 0630CSC 0640CSC 0650CSC 0660CSC 0670CSC 0675CSC 0680CSC 06100CSC 0830CSC 0840CSC 0850CSC 0860CSC 0865CSC 0870CSC 0875CSC 0880CSC 0890CSC 08100CSC 08120CSC 08150CSC 1040CSC 1050CSC 1060CSC 1070CSC 1075CSC 1080CSC 10100CSC 10120CSC 10130CSC 10150CSC 10160CSC 10200CSC 1250CSC 1275CSC 1280CSC 12100CSC 12150CSC

6 x 25 6 x 30 6 x 40 6 x 50 6 x 60 6 x 70 6 x 75 6 x 80 6 x 100 8 x 30 8 x 40 8 x 50 8 x 60 8 x 65 8 x 70 8 x 75 8 x 80 8 x 90 8 x 100 8 x 120 8 x 150 10 x 40 10 x 50 10 x 60 10 x 70 10 x 75 10 x 80 10 x 100 10 x 120 10 x 130 10 x 150 10 x 160 10 x 200 12 x 50 12 x 75 12 x 80 12 x 100 12 x 150

10 10 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13 13 13 13 13 17 17 17 17 17 17 17 17 17 17 17 17 19 19 19 19 19

250 250 200 200 200 200 100 100 200 200 200 100 100 100 100 100 100 50 50 50 50 100 100 100 100 100 50 50 50 50 25 25 20 100 50 25 25 25

6 x 50 6 x 70 6 x 100 8 x 50 8 x 60 8 x 80 8 x 100 10 x 50 10 x 80 10 x 100 10 x 120 10 x 130

10 10 10 13 13 13 13 17 17 17 17 17

120 100 70 75 65 48 40 45 30 35 24 23

Bags 0650CSCB 0670CSCB 06100CSCB 0850CSCB 0860CSCB 0880CSCB 08100CSCB 1050CSCB 1080CSCB 10100CSCB 10120CSCB 10130CSCB

24

Product Code 10150CSCB 1280CSCB 12100CSCB 12150CSCB

Thread x Length

A/F

(mm)

(mm)

10 x 150 12 x 80 12 x 100 12 x 150

17 19 19 19

18 25 20 12

6 x 50 6 x 70 6 x 100 8 x 50 8 x 60 8 x 80 8 x 100 10 x 50 10 x 80 10 x 150 12 x 75

10 10 10 13 13 13 13 17 17 17 19

10 10 10 5 5 5 5 4 4 2 2

Qty

Packs 0650CSCP 0670CSCP 06100CSCP 0850CSCP 0860CSCP 0880CSCP 08100CSCP 1050CSCP 1080CSCP 10150CSCP 1275CSCP

COACH SCREWS & NYLON PLUGS

Used In Brick *

Product Code

Thread x Length

A/F

(mm)

(mm)

6 x 60 6 x 80 8 x 100

10 10 13

40 30 12

6 x 60 6 x 80 8 x 100

10 10 13

2 2 2

Qty

Bags 0660CSCNB 0680CSCNB 08100CSCNB

Packs 0660CSCNP 0680CSCNP 08100CSCNP

NYLON PLUGS Product Code

Drill Hole 0

Length (mm)

Qty

10 10 12

30 40 50

200 100 70

10 10 12

30 40 50

20 10 5

Bags 06NLPB 08NLPB 10NLPB

Packs 06NLPP 08NLPP 10NLPP


DRY LINING CONSTRUCTION SCREWS 26 - DRYWALL SCREWS 28 - COLLATED SCREWS


DRYWALL SCREWS

DRY LINING CONSTRUCTION SCREWS

DRYWALL SCREWS

Coarse, fine and reverse thread available Available in: Black Phos.

Zinc (CR3)

Yellow

To BS

EN ISO

14592:

2008

Phillips Bugle Head drywall screws have a bugle head to prevent damage or tearing of the plasterboard.

COARSE THREAD -

FINE THREAD -

Black Phos.

For board to timber

Used to secure plasterboard to timber stud work.

Used to secure plasterboard to drywall track and ceiling track systems (Max 0.7mm)

Product Code

Product Code

Size (Metric)

Qty

3.5 x 32 3.5 x 38

2,000 1,500

00032DRYT 00038DRYT

3.5 x 25 3.5 x 32 3.5 x 35 3.5 x 38 3.5 x 42 3.5 x 50 4.2 x 65 4.2 x 75 4.8 x 100

1,000 1,000 1,000 1,000 1,000 1,000 500 500 500

3.5 x 32 3.5 x 38 3.5 x 50

400 350 250

00025DRY 00032DRY 00038DRY 00042DRY 00045DRY 00050DRY 00055DRY 00060DRY 00065DRY 00075DRY 00090DRY 00100DRY

Tubs

Size (Metric)

Qty

3.5 x 32 3.5 x 38

2,000 1,500

3.5 x 25 3.5 x 32 3.5 x 38 3.5 x 42 3.5 x 45 3.5 x 50 3.5 x 55 3.5 x 60 4.2 x 65 4.2 x 75 4.8 x 90 4.8 x 100

1,000 1,000 1,000 1,000 1,000 1,000 500 500 500 500 500 500

3.5 x 25 3.5 x 32 3.5 x 38 3.5 x 42 3.5 x 45 3.5 x 50 3.5 x 60 4.2 x 65 4.2 x 75 4.8 x 100

200 200 200 200 200 200 200 200 200 200

3.5 x 32 3.5 x 38 3.5 x 42 3.5 x 50 3.5 x 60 4.2 x 75 4.2 x 90

400 350 320 250 200 130 70

Tubs

00032DRYCT 00038DRYCT

Boxes

Boxes

00025DRYC 00032DRYC 00035DRYC 00038DRYC 00042DRYC 00050DRYC 00065DRYC 00075DRYC 00100DRYC

Bags 00032DRYCB 00038DRYCB 00050DRYCB

COARSE THREAD -

Yellow

For board to timber

Used to secure plasterboard to timber stud work. Product Code

Size (Metric)

Qty

4.8 x 125 4.8 x 150

100 100

Boxes 00125DRYCY 00150DRYCY

26

Black Phos.

For board to light steel

Boxes of 200’s 00025DRYS 00032DRYS 00038DRYS 00042DRYS 00045DRYS 00050DRYS 00060DRYS 00065DRYS 00075DRYS 00100DRYS

Bags 00032DRYB 00038DRYB 00042DRYB 00050DRYB 00060DRYB 00075DRYB 00090DRYB


DRYWALL SCREWS FINE THREAD -

DRY LINING CONSTRUCTION SCREWS

REVERSE THREAD -

Zinc (CR3)

For board to steel (0.9mm)

Used to secure plasterboard to drywall track and ceiling track systems (Max 0.7mm) Product Code

Size (Metric)

Qty

3.5 x 25 3.5 x 32 3.5 x 38 3.5 x 42 3.5 x 45 3.5 x 50 3.5 x 55 3.5 x 60 4.2 x 65 4.2 x 75 4.8 x 90 4.8 x 100 4.8 x 125 4.8 x 150

1,000 1,000 1,000 1,000 1,000 1,000 500 500 500 500 500 500 100 100

Boxes 00025DRYZ 00032DRYZ 00038DRYZ 00042DRYZ 00045DRYZ 00050DRYZ 00055DRYZ 00060DRYZ 00065DRYZ 00075DRYZ 00090DRYZ 00100DRYZ 00125DRYZ 00150DRYZ

SELF-DRILL -

Product Code

Product Code

Qty

00025PSDD 00032PSDD 00038PSDD 00042PSDD 00050PSDD 00055PSDD 00065PSDD 00075PSDD 00100PSDD 00125PSDD

3.5 x 25 3.5 x 32 3.5 x 38 3.5 x 42 3.5 x 50 3.5 x 55 3.9 x 65 4.2 x 75 4.8 x 100 4.8 x 125

1,000 1,000 1,000 1,000 1,000 500 500 500 500 100

3.5 x 32 3.5 x 42

400 320

Bags 00032PSDDB 00042PSDDB

3.9 x 25 3.9 x 38 3.9 x 42

1,000 1,000 1,000

Black Phos.

For dense board to timber

Product Code

Size (Metric)

Qty

3.9 x 30 3.9 x 45 3.9 x 55

1,000 1,000 1,000

Boxes 00030DRYD 00045DRYD 00055DRYD

SHARP POINT WAFER HEAD -

Zinc (CR3)

(Max Drill Thickness: 0.9mm) Product Code

Size (Metric)

Qty

4.2 x 13

1,000

Boxes 08916WHSP

Boxes

Qty

DENSE BOARD -

Zinc (CR3)

Size (Metric)

Size (Metric)

Boxes 00025DRYR 00038DRYR 00042DRYR

For board to steel (2.5mm)

Used to secure plasterboard to drywall track and ceiling track systems (Max 2.5-3.0mm)

Black Phos.

For dense board to steel (0.9mm)

SELF-DRILL WAFER HEAD -

Zinc (CR3)

(Max Drill Thickness: 2.5mm) Product Code

Size (Metric)

Qty

4.2 x 13 4.2 x 16 4.2 x 19 4.2 x 25

1,000 1,000 1,000 1,000

Boxes 08916WHSD 00016WHSD 00019WHSD 00025WHSD

27


DRY LINING CONSTRUCTION SCREWS

COLLATED SCREWS

COLLATED SCREWS A variety of collated fasteners to suit multiple applications. Available in:

COARSE THREAD -

Black Pass.

Zinc (CR3)

Yellow

Product Code

Size (Metric)

Qty

3.5 x 35 3.5 x 38 3.5 x 45 3.5 x 55

1,000 1,000 1,000 800

3.5 x 25 3.5 x 32 3.5 x 35 3.5 x 38 3.5 x 45 3.5 x 50 3.5 x 55 4.2 x 65 4.2 x 75

1,000 1,000 1,000 1,000 1,000 1,000 1,000 500 500

Tubs 00035CDRYTUB 00038CDRYTUB 00045CDRYTUB 00055CDRYTUB

To BS

EN ISO

14592:

2008

Zinc (CR3)

For board to steel (2.5mm)

Product Code

Size (Metric)

Qty

3.5 x 35 3.5 x 45 3.5 x 50

1,000 1,000 1,000

Boxes 00035COLLSD 00045COLLSD 00050COLLSD

SELF-DRILLING WING TIP - Exterior

Boxes 00025COLDYS 00032COLDYS 00035COLDYS 00038COLDYS 00045COLDYS 00050COLDYS 00055COLDYS 00065COLDYS 00075COLDYS

Exterior

SELF-DRILL -

Black Pass.

For board to timber

Used to secure plasterboard to timber stud work.

A2/Aust. SS

Zinc (CR3)

For light section steel

Size

Product Code

(Metric)

Plating

Qty

Exterior Zinc

1,000 1,000

Boxes 00044COLLW 4865COLLW

4.8 x 44 4.8 x 65

FLOORING SCREW Flooring to timber joists

FINE THREAD -

Zinc (CR3)

For board to steel (0.9mm)

Product Code

Size (Metric)

Qty

4.2 x 55

1,000

Boxes 00055COLLF

Used to secure plasterboard to drywall track and ceiling track systems (Max 0.9mm) Product Code

Size (Metric)

Qty

3.5 x 25 3.5 x 32 3.5 x 35 3.5 x 38 3.5 x 42 3.5 x 50 3.5 x 55

1,000 1,000 1,000 1,000 1,000 1,000 1,.000

CLASSIC -

A2/Aust. SS

Timber to timber

Boxes 00025COLDZYS 00032COLDZYS 00035COLDZYS 00038COLDZYS 00042COLDZYS 00050COLDZYS 00055COLDZYS

28

Product Code

Size (Metric)

Qty

4.0 x 40 4.0 x 50

1,000 1,000

Boxes 4040CLASSCOL 4050CLASSCOL

Yellow


METAL CONSTRUCTION SCREWS 30 - SELF-DRILLING SCREWS 31 - STITCHING SCREWS 32 - COMPOSITE PANEL SCREWS 32 - SLASH POINT SCREWS 33 - WING-TIP SCREWS 34 - COVER CAPS 34 - EPDM WASHERS

35 - SELA COVERS 35 - CORRUGATED SHEET FIXINGS 36 - METAL FRAMING SCREWS 37 - SELF-TAPPING SCREWS 38 - MACHINE SCREWS 39 - SOCKET SCREWS


SELF-DRILLING SCREWS

METAL CONSTRUCTION SCREWS

SELF-DRILLING SCREWS

For joining roofing sheet to section steel Available in:

Exterior

Zinc

Self-drilling hexagon head, for joining roofing sheets to light and heavy gauge steel. With or without EPDM washer. The exterior (Silver Ruspert) plating for a reliable and durable corrosion resistant coating which resists over 1,000 hours salt-spray.

FOR LIGHT SECTION STEEL 6*/8mm Head, Coarse Thread

Max Drilling Thickness 3-5mm

For joining roofing sheets to light gauge steel.

EXTERIOR SCREWS Product Code

Size

ZINC SCREWS -

Exterior

F Washer EPDM MCT

Qty

(mm)

(mm)

(mm)

(mm)

5.5 x 25 5.5 x 25 5.5 x 32 5.5 x 32 5.5 x 38 5.5 x 38 5.5 x 50 5.5 x 50 5.5 x 70 5.5 x 70 5.5 x 100 5.5 x 100

8 8 8 8 8 8 8 8 8 8 8 8

N/A 16 N/A 16 N/A 16 N/A 16 N/A 16 N/A 16

12 9 19 16 25 22 36 33 63 60 93 90

100 100 100 100 100 100 100 100 100 100 100 100

5.5 x 25 5.5 x 25 5.5 x 32 5.5 x 32 5.5 x 38 5.5 x 38 5.5 x 50 5.5 x 50 5.5 x 70

8 8 8 8 8 8 8 8 8

N/A 16 N/A 16 N/A 16 N/A 16 N/A

12 9 19 16 25 22 36 33 63

35 49 35 49 35 49 35 49 35

Boxes L25B L25W16B L32B L32W16B L38B L38W16B L50B L50W16B L70B L70W16B L100B L100W16B

F Washer EPDM MDT

(mm)

(mm)

(mm)

(mm)

4.2 x 13 4.2 x 19 4.8 x 13 4.8 x 16 4.8 x 19 5.5 x 19 5.5 x 25 5.5 x 32 5.5 x 38 5.5 x 45

12 12 12 12 12 12 12 12 12 12

N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

2.5 2.5 3 3 3 5 5 5 5 5

Qty

Boxes

Bags L25BB L25W16BB L32BB L32W16BB L38BB L38W16BB L50BB L50W16BB L70BB

Size

Product Code

Zinc (CR6)

MCT = Maximum clamping thickness.

00812HWSD* 00834HWSD* 01012HWSD 01058HWSD 01034HWSD 01234HWSD 00121HWSD 12114HWSD 12112HWSD 12134HWSD

1,000 1,000 1,000 1,000 1,000 500 500 500 500 500

MDT = Maximum drill thickness. Product Code

Size

F Washer EPDM

MCT

(mm)

(mm)

(mm)

(mm)

5.5 x 19 5.5 x 25 5.5 x 32 5.5 x 38 5.5 x 50 5.5 x 60 5.5 x 70

11 11 11 11 11 11 11

16 16 16 16 16 16 16

6 12 19 25 37 47 57

Qty

Bags ZL19W16 ZL25W16 ZL32W16 ZL38W16 ZL50W16 ZL60W16 ZL70W16

35 49 35 49 35 49 35

MCT = Maximum clamping thickness.

30


SELF-DRILLING & STITCHING SCREWS

METAL CONSTRUCTION SCREWS

FOR HEAVY SECTION STEEL 8mm Head, Fine Thread

Used for attaching metal to heavy gauge steel (max 12mm) without the need to pre-drill a hole.

EXTERIOR SCREWS Product Code

Size

F Washer EPDM

ZINC SCREWS -

Exterior MCT

Max Drilling Thickness 12mm

Product Code

Qty

(mm)

(mm)

(mm)

(mm)

5.5 x 32 5.5 x 32 5.5 x 38 5.5 x 38 5.5 x 55 5.5 x 55 5.5 x 65 5.5 x 80 5.5 x 100 5.5 x 100

12 12 12 12 12 12 12 12 12 12

N/A 16 N/A 16 N/A 16 16 16 N/A 16

16 13 18 15 35 32 42 57 80 77

100 100 100 100 100 100 100 100 100 100

H38W16BB 5.5 x 38

12

16

15

49

F Washer EPDM MCT

(mm)

(mm)

(mm)

(mm)

5.5 x 32 5.5 x 38 5.5 x 55 5.5 x 80

10.5 10.5 10.5 10.5

16 16 16 16

9 15 32 57

Qty

Bags

Boxes H32B H32W16B H38B H38W16B H55B H55W16B H65W16B H80W16B H100B H100W16B

Size

Zinc (CR6)

ZH32W16 ZH38W16 ZH55W16 ZH80W16

35 49 35 49

MCT = Maximum clamping thickness.

Bags MCT = Maximum clamping thickness.

STITCHING SCREWS For joining cladding sheets Available in:

Exterior

Zinc

Used for stitching sheet metal without the need to pre-drill a hole. Self-drilling point and tapered shank, with a washered hexagon head. The exterior (silver ruspert) plating for a reliable and durable corrosion resistant coating, which resists over 1,000 hours salt-spray.

STITCHING SCREWS 8mm Head, Coarse Thread

EXTERIOR SCREWS Product Code

Size

F Washer EPDM

ZINC SCREWS -

Exterior MCT

Qty

(mm)

(mm)

(mm)

(mm)

6.3 x 22 6.3 x 25

12 12

16 16

10 10

100 100

S25W16BB 6.3 x 25

12

16

10

22

Boxes S22W16B S25W16B

Product Code

Size (mm)

Max Drilling Thickness 1.7mm

Zinc (CR6)

F Washer EPDM MCT (mm)

(mm)

(mm)

13

16

10

Qty

Bags

Bags

ZS22W16 6.3 x 22

22

MCT = Maximum clamping thickness.

MCT = Maximum clamping thickness.

31


COMPOSITE PANEL & SLASH POINT

METAL CONSTRUCTION SCREWS

COMPOSITE PANEL ROOFING SCREWS For joining composite panel to light section steel Available in:

Exterior

Specifically designed to attach composite panel to light section steel. Self-drilling point with hexagon head.

COMPOSITE PANEL TO LIGHT SECTION STEEL 8mm Head, Coarse Thread 6.3 Ø

5.5 Ø

Size

Product Code

(mm)

EPDM (mm)

5.5/6.3 x 82 5.5/6.3 x 98 5.5/6.3 x 115 5.5/6.3 x 115

16 16 16 19

Min PT

Max PT Qty

(mm) (mm)

Boxes LH82W16B LH98W16B LH115W16B LH115W19B

32 48 65 65

63 78 95 95

100 100 100 100

Max Drilling Thickness 5mm

Min PT = Approximate minimum panel thickness Max PT = Approximate maximum panel thickness

SLASH POINT ROOFING SCREWS For joining sheet metal to wood Available in:

Exterior

Zinc

Designed to attach sheet metal (max 0.9mm) to timber. Hexagon head with slash point for easy pick up.

Max Drilling Thickness For Steel 0.9mm

SLASH POINT FOR TIMBER 8mm Head, Coarse Thread

EXTERIOR SCREWS Product Code

Size (mm)

ZINC SCREWS -

Exterior

F Washer EPDM MFT Qty (mm) (mm) (mm)

Boxes 12 12 12 12 12 12 12 12

16 16 19 16 19 16 16 16

0.9 5 5 17 17 37 57 110

100 100 100 100 100 100 100 100

12 12

16 16

0.9 5

45 45

Bags

32

Size (mm)

F Washer EPDM MFT Qty (mm) (mm) (mm)

Bags

DS32W16B 6.3 x 32 DS45W16B 6.3 x 45 DS45W19B 6.3 x 45 DS60W16B 6.3 x 60 DS60W19B 6.3 x 60 DS80W16B 6.3 x 80 DS100W16B 6.3 x 100 DS150W16B 6.3 x 150 DS32W16BB DS45W16BB

Product Code

Zinc (CR6)

6.3 x 32 6.3 x 45

ZDS25W16 6.3 x 25 ZDS32W16 6.3 x 32 ZDS45W16 6.3 x 45 ZDS60W16 6.3 x 60 ZDS90W16 6.3 x 80 ZDS100W16 6.3 x 100

13 13 13 13 13 13

16 16 19 16 19 16

0.9 0.9 5 17 37 57

MFT = Maximum fixture thickness.

100 100 100 100 100 100


WING TIP SELF-DRILLING SCREWS

METAL CONSTRUCTION SCREWS

WING TIP SELF-DRILLING SCREWS For joining wood to section steel Available in:

Zinc (CR6)

Exterior

Winged roofing screws, for fixing timber to light and heavy section steel. Countersunk head, winged with a self-drilling point. Light section steel thickness 5mm and heavy section steel thickness 12mm.

FOR LIGHT SECTION STEEL Coarse Thread

Max Drilling Thickness 5mm

Specifically designed to attach wood to metal (max 5mm)

EXTERIOR SCREWS Product Code

Exterior

Size

Max FT

(Metric)

(mm)

4.8 x 38 5.5 x 50 5.5 x 65 5.5 x 85 5.5 x 100

18 28 43 63 78

Qty

Boxes LW38S LW50S LW65S LW85S LW100S

NOTE: LW38B has a MDT of 4mm

ZINC SCREWS Product Code

Zinc (CR6)

Size

Max FT

(Metric)

(mm)

4.8 x 38 5.5 x 50 5.5 x 65 5.5 x 85 5.5 x 100 5.5 x 130 5.5 x 150

18 28 43 63 78 108 128

200 200 200 100 100 100 100

4.8 x 38 5.5 x 50 5.5 x 65

18 28 43

260 150 120

Qty

Boxes 200 200 200 100 100

Max FT = Maximum fixture thickness.

LW38B LW50B LW65B LW85B LW100B LW130B LW150B

Bags LW38BB LW50BB LW65BB

Max FT = Maximum fixture thickness.

FOR HEAVY SECTION STEEL Fine Metric Thread

Specifically designed to attach wood to metal (max 12mm)

ZINC SCREWS Product Code

Zinc (CR6)

Size

Max FT

(Metric)

(mm)

Qty Max Drilling Thickness 12mm

Boxes HW45B HW65B HW85B HW120B

5.5 x 45 5.5 x 65 5.5 x 85 5.5 x 120

13 29 49 84

200 200 100 100

Max FT = Maximum fixture thickness.

33


COVER CAPS & EPDM WASHERS

METAL CONSTRUCTION SCREWS

COVER CAPS AND EPDM WASHERS For sealing roofing and cladding screws

A selection of washers and cover caps for use with our range of roofing screws. Cover caps are a perfect way to blend in screws with coloured panels.

HEX HEAD COVER CAPS Bag Quantities of 1,000

Colour

Code (16mm)

Code (19mm)

1600E53CAP

1900E53CAP

1600E55CAP

1900E55CAP

1604C39CAP

1904C39CAP

1604D44CAP

1904D44CAP

1604E53CAP

1904E53CAP

Colour

Bags Black White Terracotta Petra Poppy Poppy Tangerine Beige Vandyke Brown Bamboo Goosewing Grey Mushroom Svelte Grey Honesty Aztec Meadowland Moorland Green Olive Green Juniper Green Sage Pinewood Eau de Nil Verona Albatross

Code (16mm)

Code (19mm)

1618B25CAP

1918B25CAP

Bags

29mm

Code: 2904E53CAP

1606E53CAP

1906E53CAP

1608B17CAP

1908B17CAP

1608B29CAP

1908B29CAP

1608C35CAP

1908C35CAP

1610A05CAP

1910A05CAP

1610B19CAP

1910B19CAP

1610B23CAP

1910B23CAP

1610C31CAP

1910C31CAP

1610E55CAP

1910E55CAP

1612B17CAP

1912B17CAP

1612B21CAP

1912B21CAP

1612B27CAP

1912B27CAP

1612B29CAP

1912B29CAP

1612D45CAP

1912D45CAP

1614C39CAP

1914C39CAP

1614E49CAP

1914E49CAP

1614E53CAP

1914E53CAP

1618B17CAP

1918B17CAP

EPDM WASHERS -

Galv. Steel

Merlin Grey Raven/Slate Blue Ocean Blue Solent Blue Britannia Cornflower Flame Red Burano Ultra Marine Sargasso Mid Blue Gentian Blue Heritage Squirrel Slate Grey Anthracite Oyster Quartz Hamlet White (Creamy) White Alum Pure White Metallic Silver

1618B29CAP

1918B29CAP

1618C39CAP

1918C39CAP

1618E53CAP

1918E53CAP

1618E58CAP

1918E58CAP

1620E51CAP

1920E51CAP

16RAL3000CAP 19RAL3000CAP 16RAL3004CAP 19RAL3004CAP 16RAL5002CAP 19RAL5002CAP 16RAL5003CAP 19RAL5003CAP 16RAL5005CAP 19RAL5005CAP 16RAL5010CAP 19RAL5010CAP 16RAL6002CAP 19RAL6002CAP 16RAL7000CAP 19RAL7000CAP 16RAL7012CAP 19RAL7012CAP 16RAL7016CAP 19RAL7016CAP 16RAL7035CAP 19RAL7035CAP 16RAL7039CAP 19RAL7039CAP 16RAL9002CAP 19RAL9002CAP 16RAL9003CAP 19RAL9003CAP 16RAL9006CAP 19RAL9006CAP 16RAL9010CAP 19RAL9010CAP 16S7500CAP

19S7500CAP

Aluminium

Metal Washer with Rubber (EPDM) Product Code

EPDM washer used where parts come in contact with water.

34

Washer

Hole

(mm)

(mm)

Washer Type

Bag Qty

16 19 29

6.8 5.8 6.8

Galv. Steel Galv. Steel Aluminium

100 100 100

Bags WG16 WG19 WA29


COVERS, WASHERS & FIXINGS

METAL CONSTRUCTION SCREWS

COVERS, WASHERS & FIXINGS For sealing roofing and cladding screws

Sela washers, Sela covers and Dowty type washers are a versatile product that are used to create a water tight seal for use with screws, bolts and nails.

SELA COVER AND WASHER SC

SW

Used when securing roofing sheets to create a watertight seal. When using spring head roofing nails just a washer is required as the head of the nail will cover the entire washer to provide a watertight seal. If using hook bolts you will also require a Sela Cover to cover the washer and nut to complete the seal. Product Code

(mm)

Bag Qty

28 M6 x 28 M8 x 28

75 75 75

Size

Bags 28SC 628SW 828SW

CORRUGATED SHEET FIXINGS

Designed for fixing plastic corrugated sheets to timber. The hinged cover cap provides a tight seal to prevent water ingress. Product Code

Colour

(Imp.)

Bag Qty

10 x 3 10 x 3

50 50

Screw Size

Bags CSFC CSFB

Clear Black

DOWTY TYPE WASHER

Perfect for Spring Head Nails and Drive Screws

Used mainly with drive screw nails and spring head roofing nails for attaching corrugated roofing sheets to wooden purlins. The washer provides a watertight seal when used correctly. Product Code

(mm)

Bag Qty

M6 M8

75 75

Size

Bags 6BPRS 8BPRS

COLLATED NAILS & FUEL CELLS DESIGNED FOR USE IN

CORDLESS GAS & PNEUMATIC NAILERS See page 83 35


METAL FRAMING SCREWS

METAL CONSTRUCTION SCREWS

METAL FRAMING SCREWS For fixing steel to steel applications Available in:

Exterior

Zinc

Used for stitching metal or attaching to metal without the need to pre-drill a hole.

PAN HEAD -

PAN HEAD -

Exterior

Low Profile

Product Code

(Metric)

MDT (mm)

Box Qty

Product Code

4.8 x 16

3

500

3

200

00658PPSD 00061PPSD 07716PPSD 00812PPSD 00834PPSD 00081PPSD

Size

Boxes LPP16

Size

Size

(Imperial)

(Metric)

MDT (mm)

Box Qty

6 x 5/8 6x1 7 x 7/16 8 x 1/2 8 x 3/4 8x1

3.5 x 16 3.5 x 25 3.9 x 11 4.2 x 13 4.2 x 19 4.2 x 25

2.5 2.5 2.5 2.5 2.5 2.5

1,000 1,000 1,000 1,000 1,000 1,000

4.2 x 13 4.2 x 19 4.2 x 25

2.5 2.5 2.5

200 200 200

Boxes

Boxes of 200’s 16LP

Zinc

Standard Profile

4.8 x 16

MDT = Maximum drill thickness.

WAFER HEAD -

Boxes of 200’s Exterior

812PSD 834PSD 81PSD

Low Profile

8 x 1/2 8 x 3/4 8x1

MDT = Maximum drill thickness.

Product Code

Size (Metric)

MDT (mm)

Box Qty

3

200

PAN HEAD -

Zinc

Standard Profile

Boxes of 200’s 22LPW

4.8 x 22

MDT = Maximum drill thickness.

Has serrations underneath the head.

PANCAKE HEAD -

Exterior

Low Profile

Product Code

Size

Size

(Imperial)

(Metric)

MDT (mm)

Box Qty

8 x 1/2

4.2 x 13

2.5

1,000

Boxes 00812SPSD

MDT = Maximum drill thickness. Product Code

(Metric)

MDT (mm)

Box Qty

5.5 x 19 5.5 x 26

5 5

500 500

5

200

Size

Boxes FP19 FP26

Boxes of 200’s 19FP

5.5 x 19

MDT = Maximum drill thickness.

36


SELF-TAPPING SCREWS

METAL CONSTRUCTION SCREWS

SELF-TAPPING SCREWS Available in:

Zinc

Black

Used for stitching metal or attaching to metal. A pre-drilled hole is required.

PAN HEAD -

Product Code

COUNTERSUNK -

Zinc

(Imperial)

Driver Bit Size

Qty

2 x 1/4 2 x 5/16 4 x 3/8 4 x 1/2 6 x 1/4 6 x 3/8 6 x 1/2 6 x 5/8 6 x 3/4 6x1 8 x 3/8 8 x 1/2 8 x 5/8 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8x2 10 x 1/2 10 x 5/8 10 x 3/4 10 x 1 10 x 11/4 10 x 11/2 10 x 2 12 x 1/2 12 x 1 12 x 11/2 14 x 3/4

No.1 No.1 No.1 No.1 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.3 No.3 No.3 No.3

1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 500 1,000 1,000 1,000 1,000 1,000 500 500 500 1,000 500 1,000

6 x 1/4 6 x 3/8 6 x 1/2 6 x 3/4 8 x 3/8 8 x 1/2 8 x 5/8 8 x 3/4 8x1 10 x 1/2 10 x 5/8 10 x 3/4

No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2

30 25 20 18 16 16 14 14 12 10 10 10

Size

Boxes 00214CPAZ 02516CPAZ 00438CPAZ 00412CPAZ 00614CPAZ 00638CPAZ 00612CPAZ 00658CPAZ 00634CPAZ 00061CPAZ 00838CPAZ 00812CPAZ 00858CPAZ 00834CPAZ 00081CPAZ 08114CPAZ 08112CPAZ 00082CPAZ 01012CPAZ 01058CPAZ 01034CPAZ 00101CPAZ 10114CPAZ 10112CPAZ 00102CPAZ 01212CPAZ 00121CPAZ 12112CPAZ 01434CPAZ

(Imperial)

Driver Bit Size

Qty

4 x 3/8 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 11/4 6 x 11/2 8 x 1/2 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8 x 13/4 8x2 10 x 3/4 10 x 1 10 x 11/4 10 x 11/2 10 x 2 12 x 11/2

No.1 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.3

1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 500 500 1,000 1,000 1,000 500 500 500

6 x 3/4 8 x 1/2 8 x 3/4 8x1 8 x 1 1/4 8 x 1 1/2 10 x 1 1/4

No.2 No.2 No.2 No.2 No.2 No.2 No.2

25 22 20 18 16 14 10

Size

Product Code

Zinc

Boxes 00438CCAZ 00612CCAZ 00658CCAZ 00634CCAZ 00061CCAZ 06114CCAZ 06112CCAZ 00812CCAZ 00834CCAZ 00081CCAZ 08114CCAZ 08112CCAZ 08134CCAZ 00082CCAZ 01034CCAZ 00101CCAZ 10114CCAZ 10112CCAZ 00102CCAZ 12112CCAZ

Packs 00634CCAZP 00812CCAZP 00834CCAZP 00081CCAZP 08114CCAZP 08112CCAZP 10114CCAZP

Packs 00614CPAZP 00638CPAZP 00612CPAZP 00634CPAZP 00838CPAZP 00812CPAZP 00858CPAZP 00834CPAZP 00081CPAZP 01012CPAZP 01058CPAZP 01034CPAZP

FLANGE HEAD -

Product Code

Black

(Imperial)

Driver Bit Size

Qty

6x1 8 x 1/2

No.2 No.2

1,000 1,000

Size

Boxes 00061CFAB 00812CFAB

37


MACHINE SCREWS

METAL CONSTRUCTION SCREWS

FLANGE HEAD -

(Imperial)

Driver Bit Size

Qty

6 x 1/2 6 x 3/4 8 x 3/8 8 x 1/2 8 x 5/8 8 x 3/4 8x1 8 x 11/4 10 x 3/4

No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2

1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000

Size

Product Code

Zinc

Boxes

(Imperial)

Driver Bit Size

Qty

8 x 3/8 8 x 1/2 8 x 3/4 8x1

No.2 No.2 No.2 No.2

16 16 14 12

Size

Product Code

Packs

00612CFAZ 00634CFAZ 00838CFAZ 00812CFAZ 00858CFAZ 00834CFAZ 00081CFAZ 08114CFAZ 01034CFAZ

00838CFAZP 00812CFAZP 00834CFAZP 00081CFAZP

MACHINE SCREWS Available in:

Zinc

Machine screws available in various sizes for use with a metric internal thread.

COUNTERSUNK -

Product Code

Size (mm)

Qty

Boxes 4008CPM 4010CPM 4012CPM 4020CPM 4025CPM 4040CPM 5010CPM 5012CPM 5016CPM 5020CPM 5025CPM 5030CPM 5040CPM 5050cpm 6010CPM 6012CPM 6016CPM 6020CPM 6025CPM 6030CPM 6040CPM 6050CPM

38

PAN HEAD -

Zinc

Product Code

Zinc

Size (mm)

Qty

M4 x 10 M4 x 12 M4 x 16 M4 x 20 M4 x 25 M4 x 30 M4 x 40 M4 x 50 M5 x 8 M5 x 10 M5 x 12 M5 x 16 M5 x 20 M5 x 25 M5 x 30 M5 x 40 M5 x 50 M6 x 12 M6 x 16 M6 x 25 M6 x 40

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Boxes M4 x 8 M4 x 10 M4 x 12 M4 x 20 M4 x 25 M4 x 40 M5 x 10 M5 x 12 M5 x 16 M5 x 20 M5 x 25 M5 x 30 M5 x 40 M5 x 50 M6 x 10 M6 x 12 M6 x 16 M6 x 20 M6 x 25 M6 x 30 M6 x 40 M6 x 50

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

4010PPM 4012PPM 4016PPM 4020PPM 4025PPM 4030PPM 4040PPM 4050PPM 5008PPM 5010PPM 5012PPM 5016PPM 5020PPM 5025PPM 5030PPM 5040PPM 5050PPM 6012PPM 6016PPM 6025PPM 6040PPM


SOCKET SCREWS

METAL CONSTRUCTION SCREWS

SOCKET SCREWS Available in:

A2/Aust/SS.

SOCKET COUNTERSUNK SCREWS -

A2/Aust/SS.

Designed for use in applications where the head is flush with joining parts. Conforms to ISO 10642. Size

Product Code

(mm)

A/F Drive Size

Qty

Product Code

M6 x 16 M6 x 16 M6 x 25 M8 x 25 M8 x 30

5 5 5 6 6

500 200 200 100 100

616CSKSSX 620CSKSSX 625CSKSSX 825CSKSSX 830CSKSSX

Boxes

Size (mm)

A/F Drive Size

Qty

M6 x 16 M6 x 16 M6 x 25 M8 x 25 M8 x 30

5 5 5 6 6

10 10 10 10 10

Packs

616CSKSS 620CSKSS 625CSKSS 825CSKSS 830CSKSS

SOCKET CAP SCREWS -

A2/Aust/SS.

Socket head cap screws are designed to be used with the head protruding. Conforms to ISO 4762. Size

Product Code

(mm)

A/F Drive Size

Qty

Product Code

M5 x 16 M5 x 20 M6 x 16 M6 x 20 M6 x 25 M8 x 20 M8 x 25

4 4 5 5 5 6 6

500 500 200 200 200 200 200

516CAPSSX 520CAPSSX 616CAPSSX 620CAPSSX 625CAPSSX 820CAPSSX 825CAPSSX

Boxes 516CAPSS 520CAPSS 616CAPSS 620CAPSS 625CAPSS 820CAPSS 825CAPSS

SOCKET BUTTON SCREWS -

Size (mm)

A/F Drive Size

Qty

M5 x 16 M5 x 20 M6 x 16 M6 x 20 M6 x 25 M8 x 20 M8 x 25

4 4 5 5 5 6 6

10 10 10 10 10 10 10

Packs

A2/Aust/SS.

Designed for applications that allow the head to protrude above the joining parts. The curved design of the button head is decorative and protects adjoining parts from scrapes or other damage. Conforms to ISO 7380. Product Code

Size (mm)

A/F Drive Size

Qty

Product Code

M6 x 12 M6 x 16 M6 x 20 M6 x 25 M6 x 30 M8 x 25

5 5 5 5 5 6

500 500 500 200 200 100

612BUTSSX 616BUTSSX 620BUTSSX 625BUTSSX 630BUTSSX 825BUTSSX

Boxes 612BUTSS 616BUTSS 620BUTSS 625BUTSS 630BUTSS 825BUTSS

Size (mm)

A/F Drive Size

Qty

M6 x 12 M6 x 16 M6 x 20 M6 x 25 M6 x 30 M8 x 25

5 5 5 5 5 6

10 10 10 10 10 10

Packs

39


TM

Concrete Screws DESIGNED TO REPLACE TRADITIONAL MASONRY FIXINGS. F

M RA

EF

IXI

NG F

T30 TIM Drive recess to reduce driver wear & prevent camming out

M RA

EA

NC

HO

R H

Serrated V-threads to achieve optimum insertion into all masonry types

‘IDEAL FOR FITTING WINDOWS AND DOOR FRAMES’

M AM

ER

FIX

ING

Zinc plated and yellow passivated for increased corrosion resistance

Available in:

Pan Head Countersunk

INSTALL IN JUST 2 EASY STEPS

1

Drill

Drill the hole 90° to the substrate. Always over-drill the hole depth for dust and debris.

2

Fix

Using a power tool, tighten the fixing firmly against the attachment.

SEE PAGE 73


WINDOW FABRICATION SCREWS 42 - FOR UNREINFORCED FRAMES 44 - MISCELLANEOUS SCREWS 45 - FOR REINFORCED FRAMES


WINDOW FABRICATION SCREWS

FOR UNREINFORCED FRAMES

FOR UNREINFORCED FRAMES (HARDWARE) Available in: Zinc (CR3)

Yellow

A2/Aust. SS

A comprehensive range of self piercing sharp point screws used for the construction of PVCu windows\doors and for attaching hardware to the frames. Also used to retain or attach to frames using modern day plastic reinforcement.

COUNTERSUNK HEAD WITH RIBS, SINGLE THREAD, GIMLET TIP Zinc (CR3)

Yellow

A2/Aust. SS

Zinc (CR3)

Yellow

Multiple uses for fitting a variety of hardware to frames where there is no steel or aluminium reinforcement present. The larger 4.8mm diameter items known as repair screws are frequently used in stripped holes. The Stainless Steel option should be used where there is a corrosive environment.

An alternative to the single thread range offering a slash point and High/Low thread. Can also be used when ‘pinning’ PVC reinforcement. The larger 4.8mm diameter items known as repair screws are frequently used in stripped holes.

Product Code

Product Code

(Metric)

Box Qty

4.3 x 16 4.3 x 20 4.3 x 25 4.3 x 30 4.3 x 35 4.3 x 40 4.3 x 45 4.3 x 55 4.8 x 25 4.8 x 38

1,000 1,000 1,000 1,000 1,000 1,000 500 500 1,000 1,000

4.3 x 16 4.3 x 20 4.3 x 25 4.3 x 30 4.3 x 35 4.3 x 40 4.3 x 45 4.3 x 55 4.8 x 25

1,000 1,000 1,000 1,000 1,000 1,000 500 500 1,000

4.3 x 16 4.3 x 20 4.3 x 25 4.3 x 30 4.3 x 35 4.3 x 40 4.8 x 25

1,000 1,000 1,000 1,000 1,000 1,000 1,000

Size

Zinc

Yellow 201Y 202Y 204Y 205Y 203Y 206Y 207Y 208Y 209Y*

Stainless Steel 201SS 202SS 204SS 205SS 203SS 206SS 209SS*

(Metric)

Box Qty

4.3 x 25 4.3 x 30 4.3 x 40 4.8 x 25

1,000 1,000 1,000 1,000

4.3 x 25 4.3 x 30 4.3 x 40 4.8 x 25

1,000 1,000 1,000 1,000

Size

Zinc

201Z 202Z 204Z 205Z 203Z 206Z 207Z 208Z 209Z* 210Z*

* REPAIR SCREWS FOR STRIPPED HOLES.

42

COUNTERSUNK HEAD, HI-LOW THREAD, SLASH TIP

104Z 105Z 106Z 109Z*

Yellow 104Y 105Y 106Y 109Y*

* REPAIR SCREWS FOR STRIPPED HOLES.


FOR UNREINFORCED FRAMES

WINDOW FABRICATION SCREWS

FOR UNREINFORCED FRAMES (FRICTION STAY) Available in: Zinc (CR3)

A2/Aust. SS

A comprehensive range of self piercing sharp point screws used for the construction of a PVCu window\door to fix friction stay on to PVCu.

SHALLOW PAN WITH SERRATIONS, SINGLE THREAD, GIMLET TIP Zinc (CR3)

A2/Aust. SS

Zinc (CR3)

For attaching friction stays to PVCu frames. The Stainless Steel option should be used where there is a corrosive environment or an increased risk of corrosion. Product Code

(Metric)

Box Qty

4.8 x 16 4.8 x 20 4.8 x 25 4.8 x 30

1.000 1.000 1.000 1.000

Size

Zinc 215Z 216Z 217Z 218Z

A2/Aust. SS

For attaching friction stays with countersunk holes to PVCu frames. The Stainless Steel option should be used where there is a corrosive environment or an increased risk of corrosion. (Metric)

Box Qty

4.3 x 16 4.3 x 20 4.3 x 25

1,000 1,000 1,000

4.3 x 16 4.3 x 20 4.3 x 25

1,000 1,000 1,000

Size

Product Code

Zinc

Stainless Steel 215SS 216SS 217SS 218SS

SHALLOW PAN COUNTERSUNK HEAD, SINGLE THREAD, GIMLET TIP

4.8 x 16 4.8 x 20 4.8 x 25 4.8 x 30

1.000 1.000 1.000 1.000

213Z 211Z 212Z

Stainless Steel 213SS 211SS 212SS

SHALLOW PAN COUNTERSUNK HEAD, HIGHLOW THREAD, SLASH TIP Zinc (CR3)

For attaching friction stays to PVCu frames. An alternative to the single thread range offering a slash point and a High/Low thread to aid speed of insertion and pull out, respectively. Product Code

(Metric)

Box Qty

4.3 x 20 4.3 x 25

1,000 1,000

Size

Zinc 111Z 112Z

43


WINDOW FABRICATION SCREWS

MISCELLANEOUS WINDOW SCREWS

ELEMENT SCREWS

MACHINE SCREWS

Yellow

Zinc (CR3)

Mechanical jointing screw with special truncated head for fixing either frame to frame or frame to mullions. The flat area underneath the head increases surface area to improve clamping. (Metric)

Box Qty

Product Code

4.8 x 55 4.8 x 65 4.8 x 80 4.8 x 95

200 200 200 200

520Z 530Z 540Z 545Z 550Z

Size

Product Code

A countersunk metric threaded machine screw used for fastening handles or espagnolettes into predefined holes in frames. A heavier gauge screw for what is normally a heavier duty requirement.

Yellow

(Metric)

Box Qty

M5 x 20 M5 x 30 M5 x 40 M5 x 45 M5 x 50

500 500 500 500 500

Size

Zinc

191Y 192Y 193Y 194Y

REINFORCED FRAME SCREWS Zinc (CR3)

BAYPOLE SCREWS

Martensitic SS

Zinc (CR3)

Used for attaching steel hardware to steel reinforced PVCu sections. The flat underside of the screws head allows it to clamp the materials together firmly. Size

Product Code

(Metric)

Box Qty

Zinc 130Z 131Z 132Z 133Z

4.2 x 13 4.2 x 16 4.2 x 19 4.2 x 25

1,000 1,000 1,000 1,000

4.2 x 13 4.2 x 16 4.2 x 19 4.2 x 25

1,000 1,000 1,000 1,000

Stainless Steel 130SS 131SS 132SS 133SS

Specifically designed for the joining of PVCu bay window sections but frequently used for other window and door fabrication purposes.

200 200 200 200 200 200 200

Zinc (CR3)

For use when attaching a weather bar or drip rail to PVCu window and door frames to prevent water ingress. Large head provides easy and secure clipping. (Metric)

Box Qty

4.0 x 13

1,000

Size

Zinc

44

4.8 x 40 4.8 x 50 4.8 x 60 4.8 x 70 4.8 x 80 4.8 x 90 4.8 x 100

CILL SCREWS

Zinc (CR3)

241Z

Box Qty

Zinc 289Z 290Z 291Z 292Z 293Z 294Z 295Z

WEATHER BAR SCREWS

Product Code

(Metric)

Size

Product Code

Used for attaching cills to the base of door or window frames. The self-drilling point permits the screw to drill through both reinforced and unreinforced frames. Product Code

(Metric)

Box Qty

4.2 x 50 4.2 x 55 4.2 x 65

500 500 200

Size

Zinc 225Z 226Z 227Z


FOR METAL REINFORCED FRAMES

WINDOW FABRICATION SCREWS

FOR REINFORCED FRAMES (HARDWARE) Available in: Zinc (CR3)

Yellow

Martensitic SS

A comprehensive range of self-drilling screws used for the construction of a PVCu window/door and for attaching hardware where there is a metal reinforcement.

COUNTERSUNK HEAD, SELF-TAPPING THREAD, SELF-DRILLING POINT Zinc (CR3)

Yellow

Martensitic SS

Multiple uses for fitting a variety of hardware to frames where there is a steel or aluminium reinforcement present. The smaller lengths with a ribbed countersunk head can also be used when pinning reinforcement. The Stainless Steel option should be used where there is a corrosive environment. Product Code

(Metric)

Box Qty

3.9 x 13 3.9 x 16 3.9 x 19 3.9 x 25 3.6 x 29 3.9 x 32 3.9 x 38 3.9 x 45

1,000 1,000 1,000 1,000 1,000 1,000 1,000 500

3.9 x 13 3.9 x 16 3.9 x 19 3.9 x 25 3.9 x 32 3.9 x 38 3.9 x 45

1,000 1,000 1,000 1,000 1,000 1,000 500

3.9 x 16 3.9 x 19 3.9 x 25 3.9 x 32 3.9 x 38

1,000 1,000 1,000 1,000 1,000

Size

Zinc 120Z# 121Z# 122Z# 123Z 126Z 124Z 125Z 127Z

Yellow 120Y# 121Y# 122Y# 123Y 124Y 125Y 127Y

COUNTERSUNK HEAD, METRIC THREAD, SELF-DRILLING POINT Zinc (CR3)

Yellow

An alternative to the self tapping thread version. This metric threaded screw has multiple uses for fitting a variety of hardware to frames where there is a steel reinforcement present.

Product Code

(Metric)

Box Qty

M4 x 16 M4 x 19 M4 x 25 M4 x 32 M4 x 38

1,000 1,000 1,000 1,000 500

M4 x 16 M4 x 19 M4 x 25 M4 x 32 M4 x 38

1,000 1,000 1,000 1,000 500

Size

Zinc 150Z 151Z 153Z 154Z 155Z

Yellow 150Y 151Y 153Y 154Y 155Y

Stainless Steel 121SS# 122SS# 123SS 124SS 125SS

45


WINDOW FABRICATION SCREWS

FOR METAL REINFORCED FRAMES

FOR REINFORCED FRAMES (HARDWARE) COUNTERSUNK FACET HEAD, METRIC THREAD, SELF-DRILLING POINT Zinc (CR3)

COUNTERSUNK HEAD, SELF-TAPPING THREAD, SELF-DRILLING POINT

Martensitic SS

Zinc (CR3)

Frequently used with auto feed machines when ‘pinning’ steel reinforcement inside PVCu frames. (Metric)

Box Qty

M4 x 13 M4 x 16 M4 x 19

1,000 1,000 1,000

M4 x 16

1,000

Size

Product Code

Zinc 230Z 231Z 232Z

Stainless Steel 231SS

A heavier gauge screw, generally used where extra strength is required such as attaching hinges to a steel reinforced frame. Countersunk head to suit the pre-defined holes in standard hinges.

(Metric)

Box Qty

4.8 x 25 4.8 x 32 4.8 x 38 4.8 x 45 4.8 x 60

1,000 500 500 500 200

Size

Product Code

Zinc 423Z 424Z 425Z 427Z 429Z

FOR REINFORCED FRAMES (FRICTION STAY) Available in: Zinc (CR3)

Martensitic SS

A range of fasteners designed to fix friction stay on to PVCu with metal re-enforcement.

SHALLOW PAN, SELF-TAPPING THREAD, SELF-DRILLING POINT Zinc (CR3)

Martensitic SS

(Metric)

Box Qty

3.9 x 16 3.9 x 19 3.9 x 25 3.9 x 29 4.8 x 16 4.8 x 19 4.8 x 23

1,000 1,000 1,000 1,000 1,000 1,000 1,000

3.9 x 16 3.9 x 19 3.9 x 25 3.9 x 29 4.8 x 23

1,000 1,000 1,000 1,000 1,000

Size

Product Code

Zinc For attaching friction stays with countersunk holes to steel reinforced PVCu frames. The larger 4.8mm diameter items known as repair screws are frequently used in stripped holes. The Stainless Steel option should be used where there is a corrosive environment or an increased risk of corrosion.

135Z 136Z 137Z 138Z 141Z* 142Z* 143Z*

Stainless Steel 135SS 136SS 137SS 138SS 143SS*

* REPAIR SCREWS for stripped holes.

46


NUTS, BOLTS, SETS & WASHERS 48 - CARRIAGE BOLTS 50 - ROOFING BOLTS 50 - CABLE TRAY BOLTS 51 - THREADED BAR

52 - SETS 53 - NUTS 55 - WASHERS 58 - MIXED SET


CARRIAGE BOLT & NUT

NUTS, BOLTS, SETS & WASHERS

CARRIAGE BOLT & HEX NUT

Materials

Available in: Zinc (CR3) To BS

EN ISO

14592:2

008

A domed head bolt with a square anti spin shoulder mainly used for clamping timber or attaching ironmongery to timber. Fully threaded up to 150mm. Product Code

Boxes

0620CB 0625CB 0630CB 0640CB 0650CB 0660CB 0665CB 0670CB 0675CB 06100CB 06130CB 06150CB 0820CB 0825CB 0830CB 0835CB 0840CB 0845CB 0850CB 0860CB 0865CB 0870CB 0875CB 0880CB 0890CB 08100CB 08110CB 08120CB 08130CB 08150CB 08180CB 08200CB 1025CB 1030CB 1035CB 1040CB 1050CB 1065CB 1070CB 1075CB 1080CB 1090CB 10100CB 10110CB 10120CB 10130CB 10140CB 10150CB 10160CB 10180CB 10200CB 10220CB 10240CB 10260CB 10280CB 10300CB

48

Thread x Length

Nut A/F

(mm)

(mm)

M6 x 20 M6 x 25 M6 x 30 M6 x 40 M6 x 50 M6 x 60 M6 x 65 M6 x 70 M6 x 75 M6 x 100 M6 x 130 M6 x 150 M8 x 20 M8 x 25 M8 x 30 M8 x 35 M8 x 40 M8 x 45 M8 x 50 M8 x 60 M8 x 65 M8 x 70 M8 x 75 M8 x 80 M8 x 90 M8 x 100 M8 x 110 M8 x 120 M8 x 130 M8 x 150 M8 x 180 M8 x 200 M10 x 25 M10 x 30 M10 x 35 M10 x 40 M10 x 50 M10 x 65 M10 x 70 M10 x 75 M10 x 80 M10 x 90 M10 x 100 M10 x 110 M10 x 120 M10 x 130 M10 x 140 M10 x 150 M10 x 160 M10 x 180 M10 x 200 M10 x 220 M10 x 240 M10 x 260 M10 x 280 M10 x 300

10 10 10 10 10 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17

Qty

200 200 200 200 200 100 100 100 100 100 50 50 200 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 25 25 25 100 100 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25 10 10 10 10 10 10

Product Code

Thread x Length

Nut A/F

(mm)

(mm)

1250CB 1265CB 1275CB 1290CB 12100CB 12110CB 12120CB 12130CB 12140CB 12150CB 12160CB 12180CB 12200CB 12220CB 12240CB 12260CB 12280CB 12300CB 16100CB 16110CB 16150CB 16180CB 16200CB

M12 x 50 M12 x 65 M12 x 75 M12 x 90 M12 x 100 M12 x 110 M12 x 120 M12 x 130 M12 x 140 M12 x 150 M12 x 160 M12 x 180 M12 x 200 M12 x 220 M12 x 240 M12 x 260 M12 x 280 M12 x 300 M16 x 100 M16 x 110 M16 x 150 M16 x 180 M16 x 200

19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 24 24 24 24 24

25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5

M8 x 100 M8 x 110 M8 x 130 M8 x 150 M10 x 75 M10 x 100 M10 x 120 M10 x 130 M10 x 150 M10 x 180 M10 x 200 M12 x 75 M12 x 100 M12 x 130 M12 x 150 M12 x 200

13 13 13 13 17 17 17 17 17 17 17 19 19 19 19 19

40 35 30 24 28 24 20 20 14 12 10 14 14 12 10 5

M8 x 100 M8 x 110 M8 x 130 M8 x 150 M10 x 75 M10 x 100 M10 x 120 M10 x 130 M10 x 150 M10 x 180 M12 x 75 M12 x 100 M12 x 130

13 13 13 13 17 17 17 17 17 17 19 19 19

4 3 3 2 3 2 2 2 2 2 2 2 2

Bags

08100CBB 08110CBB 08130CBB 08150CBB 1075CBB 10100CBB 10120CBB 10130CBB 10150CBB 10180CBB 10200CBB 1275CBB 12100CBB 12130CBB 12150CBB 12200CBB

Qty

Packs 08100CBP 08110CBP 08130CBP 08150CBP 1075CBP 10100CBP 10120CBP 10130CBP 10150CBP 10180CBP 1275CBB 12100CBP 12130CBP


CARRIAGE / ROOFING BOLTS & NUT

NUTS, BOLTS, SETS & WASHERS

EXTERIOR CARRIAGE BOLT & HEX NUT Exterior bolt & nut

To BS

Available in:

EN ISO

14592:2

008

Exterior Product Code

(Metric)

Nut A/F (mm)

10 x 100 10 x 150 10 x 160 10 x 200 10 x 220

17 17 17 17 17

Size

Qty

Bags A domed head bolt with a square anti spin shoulder mainly used for clamping timber or attaching ironmongery to timber.

10100INCB 10150INCB 10160INCB 10200INCB 10220INCB

10 10 10 10 10

STAINLESS STEEL CARRIAGE BOLTS Available in: A2/Aust.SS

Materials

To BS

Product Code

Thread x Length (mm)

Qty

Product Code

200 200 200 200 50 50 100 100 100 50 50 50 25 25 50 50 50 25 25 25 25 50 50 25 25 25

0625CBSSX 0630CBSSX 0640CBSSX 0650CBSSX 0675CBSSX 06100CBSSX 0840CBSSX 0850CBSSX 0860CBSSX 0875CBSSX 0880CBSSX 08100CBSSX 08130CBSSX 08150CBSSX 1075CBSSX 1090CBSSX 10100CBSSX 10110CBSSX 10120CBSSX 10130CBSSX 10150CBSSX 1275CBSSX 12100CBSSX 12110CBSSX 12130CBSSX 12150CBSSX

Boxes 0625CBSS 0630CBSS 0640CBSS 0650CBSS 0675CBSS 06100CBSS 0840CBSS 0850CBSS 0860CBSS 0875CBSS 0880CBSS 08100CBSS 08130CBSS 08150CBSS 1075CBSS 1090CBSS 10100CBSS 10110CBSS 10120CBSS 10130CBSS 10150CBSS 1275CBSS 12100CBSS 12110CBSS 12130CBSS 12150CBSS

EN ISO

14592:2

008

A cup square carriage bolt & hex nut in A2 stainless steel. A full metric coarse thread. Thread x Length (mm)

Qty

Bags M6 x 25 M6 x 30 M6 x 40 M6 x 50 M6 x 75 M6 x 100 M8 x 40 M8 x 50 M8 x 60 M8 x 75 M8 x 80 M8 x 100 M8 x 130 M8 x 150 M10 x 75 M10 x 90 M10 x 100 M10 x 110 M10 x 120 M10 x 130 M10 x 150 M12 x 75 M12 x 100 M12 x 110 M12 x 130 M12 x 150

M6 x 25 M6 x 30 M6 x 40 M6 x 50 M6 x 75 M6 x 100 M8 x 40 M8 x 50 M8 x 60 M8 x 75 M8 x 80 M8 x 100 M8 x 130 M8 x 150 M10 x 75 M10 x 90 M10 x 100 M10 x 110 M10 x 120 M10 x 130 M10 x 150 M12 x 75 M12 x 100 M12 x 110 M12 x 130 M12 x 150

10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

49


CABLE TRAY BOLT / HEX NUTS & SETS

NUTS, BOLTS, SETS & WASHERS

ROOFING BOLT & NUT

Materials

Available in: Zinc (CR3)

Manufactured with a large flat head, making it ideal for clamping thin sheet metal, plastic and wood

Product Code

Thread x Length

Nut

(mm)

(mm)

M5 x 12 M5 x 30 M6 x 08 M6 x 12 M6 x 16 M6 x 20 M6 x 25 M6 x 30 M6 x 35 M6 x 40 M6 x 50 M6 x 60 M6 x 70 M6 x 80 M6 x 100 M8 x 25 M8 x 30 M8 x 40 M8 x 50 M8 x 60 M8 x 80 M8 x 100 M8 x 120 M8 x 140 M8 x 160 M8 x 180 M8 x 200

M5 M5 M6 M6 M6 M6 M6 M6 M6 M6 M6 M6 M6 M6 M6 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8

Qty

Boxes 0512RB 0530RB 0608RB 0612RB 0616RB 0620RB 0625RB 0630RB 0635RB 0640RB 0650RB 0660RB 0670RB 0680RB 06100RB 0825RB 0830RB 0840RB 0850RB 0860RB 0880RB 08100RB 08120RB 08140RB 08160RB 08180RB 08200RB

Product Code

Thread x Length

Nut

(mm)

(mm)

M6 x 12 M6 x 20 M6 x 25 M6 x 30 M6 x 40 M6 x 50 M6 x 60 M6 x 80

M6 M6 M6 M6 M6 M6 M6 M6

150 140 130 120 110 90 80 70

M6 x 12 M6 x 20 M6 x 25 M6 x 30 M6 x 40 M6 x 50 M6 x 60 M6 x 80

M6 M6 M6 M6 M6 M6 M6 M6

14 12 10 10 8 8 6 4

Qty

Bags 200 200 200 200 200 200 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50

0612RBB 0620RBB 0625RBB 0630RBB 0640RBB 0650RBB 0660RBB 0680RBB

Packs 0612RBP 0620RBP 0625RBP 0630RBP 0640RBP 0650RBP 0660RBP 0680RBP

CABLE TRAY BOLTS & HEX NUT Available in:

Materials

Zinc (CR3)

Product Code

Thread x Length

Nut

(mm)

(mm)

M6 x 12 M6 x 16 M6 x 20 M6 x 25

M6 M6 M6 M6

Qty

Boxes Specifically designed to provide a rapid and secure fixing when erecting cable trays. The combi recess or hex flange nut can be used with a power tool.

50

CTB612 CTB616 CTB620 CTB625

200 200 200 200


THREADED BAR / HEX NUTS & SETS

NUTS, BOLTS, SETS & WASHERS

THREADED BAR

SETS & HEX NUTS

Threaded Bar or rod has multiple industrial applications. Commonly used with drop in anchors for suspending cable trays from ceilings or can be cut to a required length and used with chemical resin. Metric thread for use with standard nuts and connectors.

ZINC THREADED BAR Product Code

Thread x Length (mm)

Qty

10 10 10 10 10

M6 x 1000 M8 x 1000 M10 x 1000 M12 x 1000 M16 x 1000 M20 x 1000

10 10 10 10 10 5

STAINLESS STEEL THREADED BAR A2/Aus.SS Product Code

Thread x Length (mm)

Qty

Packs (1000mm) 06TBSS 08TBSS 10TBSS 12TBSS 16TBSS 20TBSS

M6 x 1000 M8 x 1000 M10 x 1000 M12 x 1000 M16 x 1000 M20 x 1000

5 5 5 5 5 5

HIGH TENSILE THREADED BAR Zinc (CR3) Product Code

Thread x Length (mm)

Qty

Packs (1000mm) 06TBZHT 08TBZHT 10TBZHT 12TBZHT 16TBZHT 20TBZHT

A fully threaded high tensile bolt used in a wide variety of applications.

Product Code

Thread x Length

A/F

(mm)

(mm)

M6 x 16 M6 x 20 M6 x 25 M6 x 50 M8 x 20 M8 x 25 M8 x 40 M8 x 50 M8 x 70 M10 x 25 M10 x 30 M10 x 40 M10 x 50 M10 x 70 M10 x 100 M12 x 25 M12 x 30 M12 x 35 M12 x 40 M12 x 50 M12 x 70 M12 x 100

10 10 10 10 13 13 13 13 13 17 17 17 17 17 17 19 19 19 19 19 19 19

130 115 100 70 60 55 45 40 30 35 32 28 25 20 16 25 23 22 20 18 14 10

M6 x 16 M6 x 20 M6 x 25 M6 x 50 M8 x 20 M8 x 25 M8 x 40 M8 x 50 M8 x 70 M10 x 25 M10 x 30 M10 x 40 M10 x 50 M10 x 70 M10 x 100 M12 x 25 M12 x 30 M12 x 35 M12 x 40 M12 x 50 M12 x 70 M12 x 100

10 10 10 10 13 13 13 13 13 17 17 17 17 17 17 19 19 19 19 19 19 19

8 8 6 4 6 4 2 2 2 2 2 2 2 2 16 25 23 22 20 18 14 10

Qty

Bags M6 x 300 M8 x 300 M10 x 300 M12 x 300 M16 x 300

Packs (1000mm) 06TBZ 08TBZ 10TBZ 12TBZ 16TBZ 20TBZ

Zinc (CR3)

Zinc (CR3)

Packs (300mm) 06300TBZ 08300TBZ 10300TBZ 12300TBZ 16300TBZ

Available in:

M6 x 1000 M8 x 1000 M10 x 1000 M12 x 1000 M16 x 1000 M20 x 1000

10 10 10 10 10 5

616SNZB 620SNZB 625SNZB 650SNZB 820SNZB 825SNZB 840SNZB 850SNZB 870SNZB 1025SNZB 1030SNZB 1040SNZB 1050SNZB 1070SNZB 10100SNZB 1225SNZB 1230SNZB 1235SNZB 1240SNZB 1250SNZB 1270SNZB 12100SNZB

Packs 616SNZP 620SNZP 625SNZP 650SNZP 820SNZP 825SNZP 840SNZP 850SNZP 870SNZP 1025SNZP 1030SNZP 1040SNZP 1050SNZP 1070SNZP 10100SNZP 1225SNZP 1230SNZP 1235SNZP 1240SNZP 1250SNZP 1270SNZP 12100SNZP

51


SETS

NUTS, BOLTS, SETS & WASHERS

SETS (DIN 933) Available in:

Zinc (CR3)

A fully threaded high tensile bolt used in a wide variety of applications.

Product Code

Thread x Length

A/F

(mm)

(mm)

M6 x 12 M6 x 16 M6 x 20 M6 x 25 M6 x 30 M6 x 35 M6 x 40 M6 x 50 M8 x 16 M8 x 20 M8 x 25 M8 x 30 M8 x 35 M8 x 40 M8 x 50 M8 x 60 M8 x 70 M8 x 80 M8 x 100 M10 x 20 M10 x 25 M10 x 30 M10 x 35 M10 x 40 M10 x 50 M10 x 60 M10 x 70 M10 x 75 M10 x 80 M10 x 100 M12 x 25 M12 x 30 M12 x 35

10 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13 13 13 13 17 17 17 17 17 17 17 17 17 17 17 19 19 19

Qty

Product Code

500 500 500 500 500 500 200 200 200 200 200 200 200 200 200 200 200 200 100 200 200 200 100 100 100 100 100 100 100 50 100 100 100

S1240Z S1245Z S1250Z S1260Z S1270Z S1275Z S1280Z S12100Z S12120Z S1625Z S1630Z S1635Z S1640Z S1645Z S1650Z S1655Z S1660Z S1665Z S1670Z S1675Z S1680Z S16100Z S2040Z S2045Z S2050Z S2055Z S2060Z S2065Z S2070Z S2075Z S2080Z S2090Z S20100Z

Boxes S612Z S616Z S620Z S625Z S630Z S635Z S640Z S650Z S816Z S820Z S825Z S830Z S835Z S840Z S850Z S860Z S870Z S880Z S8100Z S1020Z S1025Z S1030Z S1035Z S1040Z S1050Z S1060Z S1070Z S1075Z S1080Z S10100Z S1225Z S1230Z S1235Z

52

Thread x Length

A/F

(mm)

(mm)

M12 x 40 M12 x 45 M12 x 50 M12 x 60 M12 x 70 M12 x 75 M12 x 80 M12 x 100 M12 x 120 M16 x 25 M16 x 30 M16 x 35 M16 x 40 M16 x 45 M16 x 50 M16 x 55 M16 x 60 M16 x 65 M16 x 70 M16 x 75 M16 x 80 M16 x 100 M20 x 40 M20 x 45 M20 x 50 M20 x 55 M20 x 60 M20 x 65 M20 x 70 M20 x 75 M20 x 80 M20 x 90 M20 x 100

19 19 19 19 19 19 19 19 19 24 24 24 24 24 24 24 24 24 24 24 24 24 30 30 30 30 30 30 30 30 30 30 30

Qty

Boxes 100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25 25 25 25 25 25 20 20


NUTS

NUTS, BOLTS, SETS & WASHERS

NUTS Available in: Zinc (CR3)

A2/Aust.SS

A range of metric threaded zinc and stainless steel nuts, includes the most popular types.

HEX FULL NUTS -

HEX FULL NUTS -

Zinc (CR3)

A traditional nut used for all bolting and fastening applications.

Product Code

Size

Height

A/F

(mm)

(mm)

(mm)

M4 M5 M6 M8 M10 M12 M16 M20

3.2 4 5 6.5 8 10 13 16

7 8 10 13 17 19 24 30

Qty

Boxes NH4Z NH5Z NH6Z NH8Z NH10Z NH12Z NH16Z NH20Z

A full hex nut in A2 stainless steel. Conforms to DIN 934.

Size

Height

A/F

(mm)

(mm)

(mm)

M4 M5 M6 M8 M10 M12 M16

3.2 4 5 6.5 8 10 13

7 8 10 13 17 19 24

1,000 1,000 500 200 100 100 100

NH4SSX NH5SSX NH6SSX NH8SSX NH10SSX NH12SSX NH16SSX

M4 M5 M6 M8 M10 M12 M16

3.2 4 5 6.5 8 10 13

7 8 10 13 17 19 24

10 10 10 10 10 5 5

Product Code

Size

Height

A/F

(mm)

(mm)

(mm)

M6 M8 M10 M12 M16

8 9.5 11.5 14 18

10 13 17 19 24

300 300 130 90 45

M6 M8 M10 M12 M16

8 9.5 11.5 14 18

10 13 17 19 24

20 10 4 4 2

Product Code

Qty

Boxes 1,500 1,000 500 200 100 100 100 50

Bags 6HNUTZB 8HNUTZB 10HNUTZB 12HNUTZB 16HNUTZB 20HNUTZB

A2/Aust.SS

M6 M8 M10 M12 M16 M20

5 6.5 8 10 13 16

10 13 17 19 24 30

600 300 130 90 45 20

M6 M8 M10 M12 M16 M20

5 6.5 8 10 13 16

10 13 17 19 24 30

40 30 20 10 4 2

NH4SS NH5SS NH6SS NH8SS NH10SS NH12SS NH16SS

Bags

Packs 6HNUTZP 8HNUTZP 10HNUTZP 12HNUTZP 16HNUTZP 20HNUTZP

NYLON INSERT NUTS (TYPE P) - Zinc (CR3) Also known as locking nuts designed to prevent the nut from loosening.

Product Code

Size

Height

A/F

(mm)

(mm)

(mm)

M6 M8 M10 M12 M16

8 9.5 11.5 14 18

10 13 17 19 24

Qty

Boxes NP6Z NP8Z NP10Z NP12Z NP16Z

Qty

Bags 6NPB 8NPB 10NPB 12NPB 16NPB

Packs 500 200 100 100 100

6NPP 8NPP 10NPP 12NPP 16NPP

53


NUTS

NUTS, BOLTS, SETS & WASHERS

NYLON INSERT NUTS (TYPE T) - Zinc (CR3) An economic nut thinner than Type P, designed to prevent the nut from loosening. Product Code

Size

Height

A/F

(mm)

(mm)

(mm)

Qty

Boxes NT6Z NT8Z NT10Z NT12Z NT16Z

M6 M8 M10 M12 M16

6 8 10 12 16

10 13 17 19 24

500 200 100 100 100

Zinc (CR3)

Ideal for protective or aesthetic uses.

Product Code

Size

Height

A/F

(mm)

(mm)

(mm)

M6 M8 M10 M12 M16 M20

12 15 18 22 28 34

10 13 17 19 24 30

Qty

Boxes ND6Z ND8Z ND10Z ND12Z ND16Z ND20Z

200 100 100 100 100 50

NYLON INSERT NUTS (TYPE T) - A2/Aust.SS

HEX DOME NUT-

A hexagonal nylon nut, Type T in A2 stainless steel. Sometimes known as a ‘thin nut’. A metric coarse thread. Conforms to ISO 10511.

A hexagonal dome nut, in A2 stainless steel, ideal for protective or aesthetic uses. A metric coarse thread. Conforms to DIN1587.

Product Code

Size

Height

A/F

(mm)

(mm)

(mm)

M5 M6 M8 M10 M12 M16

4 6 8 10 12 16

8 10 13 17 19 24

1000 500 200 100 100 100

M5 M6 M8 M10 M12 M16

4 6 8 10 12 16

8 10 13 17 19 24

10 10 10 10 5 5

Qty

Boxes NT5SS NT6SS NT8SS NT10SS NT12SS NT16SS NT5SSX NT6SSX NT8SSX NT10SSX NT12SSX NT16SSX

HEX SERRATED FLANGE NUTS - Zinc (CR3) Designed to provide a larger clamping and locking force than a standard hex nut. Product Code

Size

Height

A/F

(mm)

(mm)

(mm)

M6 M8 M10 M12 M16 M20

6 8 10 12 16 20

10 13 17 19 24 30

Qty

Boxes NF6Z NF8Z NF10Z NF12Z NF16Z NF20Z

Product Code

A2/Aust.SS

Size

Height

A/F

(mm)

(mm)

(mm)

M5 M6 M8 M10 M12

10 12 15 18 22

8 10 13 17 19

500 200 100 100 100

M5 M6 M8 M10 M12

10 12 15 18 22

8 10 13 17 19

10 10 10 10 5

Qty

Boxes

Bags

54

HEX DOME NUT -

300 200 100 100 100 50

ND5SS ND6SS ND8SS ND10SS ND12SS

Bags ND5SSX ND6SSX ND8SSX ND10SSX ND12SSX


NUTS & WASHERS HEX CONNECTOR NUT -

NUTS, BOLTS, SETS & WASHERS

WING NUT -

Zinc (CR3)

For extending the length of threaded bar. Product Code

Size

Height

A/F

(mm)

(mm)

(mm)

A light duty nut used to be fastened by hand where the nut is regularly removed.

Qty

Product Code

Boxes NC6Z NC8Z NC10Z NC12Z NC16Z NC20Z

M6 M8 M10 M12 M16 M20

18 24 30 36 48 60

10 13 17 19 24 30

Zinc (CR3)

Size

Height

A/F

(mm)

(mm)

(mm)

M6 M8 M10 M12 M16

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

Qty

Boxes

200 100 100 100 50 25

NW6Z NW8Z NW10Z NW12Z NW16Z

300 200 100 100 100

WASHERS Zinc (CR3)

Available in:

A2/Aust.SS

A variety of zinc and stainless steel plated washers to suit multiple applications.

FORM A WASHER -

Zinc (CR3)

FORM A WASHER -

A traditional and commonly used washer for clamping and spacing applications. Conforms to DIN 125-A.

A traditional and commonly used washer for clamping and spacing applications. Product Code

Size

Outer Thickness

(mm)

(mm)

(mm)

M4 M5 M6 M8 M10 M12 M14 M16 M20 M24

9 10 12.5 17 21 24 24 30 37 44

0.8 1 1.6 1.6 2 2.5 2.5 3 3 4

1,250 1,000 500 200 100 100 100 100 100 100

M6 M8 M10 M12 M16 M20

12.5 17 21 24 30 37

1.6 1.6 2 2.5 3 3

500 350 200 130 75 50

M6 M8 M10 M12 M16 M20

12.5 17 21 24 30 37

1.6 1.6 2 2.5 3 3

60 30 20 15 8 4

Qty

Boxes WA4Z WA5Z WA6Z WA8Z WA10Z WA12Z WA14Z WA16Z WA20Z WA24Z

Product Code

Size

Outer Thickness

(mm)

(mm)

(mm)

M4 M5 M6 M8 M10 M12 M16

9 10 12 16 20 24 30

0.8 1 1.6 1.6 2 2.5 3

1000 1000 1000 500 500 200 100

M4 M5 M6 M8 M10 M12 M16

9 10 12 16 20 24 30

0.8 1 1.6 1.6 2 2.5 3

50 50 20 20 10 10 10

Qty

Boxes

Bags 6WHAZB 8WHAZB 10WHAZB 12WHAZB 16WHAZB 20WHAZB

A2/Aust.SS

WA4SS WA5SS WA6SS WA8SS WA10SS WA12SS WA16SS

Bags WA4SSX WA5SSX WA6SSX WA8SSX WA10SSX WA12SSX WA16SSX

Packs 6WHAZP 8WHAZP 10WHAZP 12WHAZP 16WHAZP 20WHAZP

55


WASHERS

NUTS, BOLTS, SETS & WASHERS

FORM B WASHER -

SPRING WASHER -

Zinc (CR3)

An economic washer thinner than a Form A, used for clamping and spacing applications. Product Code

Size

Outer

Thickness

(mm)

(mm)

(mm)

M6 M8 M10 M12 M16 M20

12 17 21 24 30 27

0.8 1 1.25 1.6 2 2

Qty

Boxes WB6Z WB8Z WB10Z WB12Z WB16Z WB20Z

Designed to prevent the nut from loosening. Also has square section. Product Code

500 200 100 100 100 100

A2/Aust.SS

Size

Outer Thickness

(mm)

(mm)

(mm)

M6 M8 M10 M12 M16

12 16 20 24 30

0.8 1 1.25 1.6 2

1000 500 500 200 100

Bags M6 M8 M10 M12 M16

12 16 20 24 30

FORM C WASHER -

0.8 1 1.25 1.6 2

20 20 10 10 10

Zinc (CR3)

A wider diameter washer than the Form A & B used to increase the clamping area. Product Code

Size

Outer Thickness

(mm)

(mm)

(mm)

M6 M8 M10 M12 M16 M20

14 21 24 28 34 39

1.6 1.6 2 2.5 3 4

Qty

Boxes WC6Z WC8Z WC10Z WC12Z WC16Z WC20Z

56

Qty

M6 x 9.9 x 3.2 x 1.6

500

WSP8Z

M8 x 12.7 x 4 x 2

250

WSP10Z

M10 x 16 x 5 x 2.5

200

WSP12Z

M12 x 18 x 5 x 2.5

200

WSP16Z

M16 x 24.4 x 7 x 3.5

100

SQUARE PLATE WASHER -

Zinc (CR3)

Designed to provide a large clamping surface and therefore spreading the load of a fastening.

Qty

Boxes

WB6SSX WB8SSX WB10SSX WB12SSX WB16SSX

(mm)

WSP6Z

Thinner than a Form A, used for clamping and spacing applications. Conforms to DIN 125-B.

WB6SS WB8SS WB10SS WB12SS WB16SS

Size Hole x L x W x D

Boxes

FORM B WASHER -

Product Code

Zinc (CR3)

500 200 100 100 100 100

Product Code

Size Hole x L x W x D (mm)

Qty

Boxes WS8403Z

M8 x 40 x 40 x 3

WS8405Z

M8 x 40 x 40 x 5

100 100

WS10403Z

M10 x 40 x 40 x 3

100

WS10405Z

M10 x 40 x 40 x 5

100

WS10503Z

M10 x 50 x 50 x 3

100

WS12503Z

M12 x 50 x 50 x 3

100

WS16503Z

M16 x 50 x 50 x 3

100

1050WHSPZB

M10 x 50 x 50 x 3

30

1250WHSPZB

M12 x 50 x 50 x 3

30

Bags Packs 1050WHSPZP

M10 x 50 x 50 x 3

2

1250WHSPZP

M12 x 50 x 50 x 3

2


WASHERS PENNY/REPAIR WASHER -

Zinc (CR3)

NUTS, BOLTS, SETS & WASHERS

PENNY/REPAIR WASHER -

A large diameter washer ideal for spreading the clamping load, reducing a hole diameter and packing out. Size

Outer Thickness

(mm)

(mm)

(mm)

WP525Z

M5

25

1.5

100

WP620Z

M6

20

1.5

100

WP625Z

M6

25

1.5

WP630Z

M6

30

WP640Z

M6

WP825Z WP830Z

A2/Aust.SS

Conforms to DIN 9054.

Size

Outer Thickness

(mm)

(mm)

(mm)

WP525SS

M5

25

1.5

200

WP625SS

M6

25

1.5

200

100

WP825SS

M8

25

1.5

200

1.5

100

WP835SS

M8

35

1.5

200

40

1.5

100

WP1025SS

M10

25

1.5

200

M8

25

1.5

100

WP1035SS

M10

35

1.5

200

M8

30

1.5

100

WP1235SS

M12

35

1.5

200

WP840Z

M8

40

1.5

100

WP1025Z

M10

25

1.5

100

Bags

WP1030Z

M10

30

1.5

100

WP1040Z

M10

40

1.5

100

WP1240Z

M12

40

1.5

100

Product Code

Qty

Boxes

Product Code

Qty

Boxes

Bags

WP525SSX

M5

25

1.5

10

WP625SSX

M6

25

1.5

10

WP825SSX

M8

25

1.5

10

WP835SSX

M8

35

1.5

10

WP1025SSX

M10

25

1.5

10

625WHPZB

M6

25

1.5

160

WP1035SSX

M10

35

1.5

10

825WHPZB

M8

25

1.5

160

WP1235SSX

M12

35

1.5

10

1040WHPZB

M10

40

1.5

60

WP1240Z

M12

40

1.5

50

625WHPZP

M6

25

1.5

10

640WHPZP

M6

40

1.5

4

825WHPZP

M8

25

1.5

8

840WHPZP

M8

40

1.5

4

1040WHPZP

M10

40

1.5

4

Packs

57


WASHERS

NUTS, BOLTS, SETS & WASHERS

MIXED BOLTS, NUTS AND WASHERS SET - 500PCS Nuts, bolts and washer set in a zinc finish presented in a re-usable plastic carry case. Set contains 500 pieces.

Product Code

Description

Size (mm)

Case Qty

Hex Nut DIN934 Hex Nut DIN934 Hex Nut DIN934 Form A Washer Form A Washer Form A Washer Hex Bolt DIN933 Hex Bolt DIN933 Hex Bolt DIN933 Hex Bolt DIN933 Hex Bolt DIN933 Hex Bolt DIN933 Hex Bolt DIN933 Hex Bolt DIN933 Hex Bolt DIN933

M6 M8 M10 M6 M8 M10 M6 x 16 M6 x 20 M6 x 25 M8 x 30 M8 x 40 M8 x 50 M10 x 60 M10 x 70 M10 x 75

75 30 20 150 60 50 30 20 20 10 10 5 10 6 4

CASE MIXBNWS

SDS Plus Drill Bits Features Twin V flute design for increased drilling performance and dust extraction. Large range of sizes for most applications, including direct fix anchors.

High quality Tungsten Carbide tip. P.G.M. approved and marked.

SDS Plus Steels

Point

58 58

Tile

Spade

Gouge

SEE PAGE

111


FIXINGS & FASTENERS 60 - CABLE TIES 61 - HOOKS AND EYES

62 - SANITARY FIXINGS 64 - PIPE CLIPS


CABLE TIES

FIXINGS & FASTENERS

CABLE TIES Available in:

Nylon

An economic and convenient solution designed to bundle and secure wires, cables, hoses and more. Available in multiple colours. Manufactured from nylon with operational temperature range of -40°c to 85°c.

NATURAL CABLE TIES

Product Code

BLACK CABLE TIES

(mm)

Tensile Strength

Qty

Product Code

2.5 x 100 3.6 x 140 3.6 x 200 4.5 x 180 4.5 x 200 4.5 x 300 4.8 x 160 4.8 x 200 4.8 x 250 4.8 x 300 4.8 x 370 4.8 x 430 7.6 X 250 7.6 x 300 7.6 x 370 7.6 x 540 9.0 x 530

8.10 18.20 18.20 22.20 22.20 22.20 22.20 22.20 22.20 22.20 22.20 22.20 54.40 54.40 54.40 54.40 79.40

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

25100CTB 36140CTB 36200CTB 45180CTN 45200CTN 45300CTN 48160CTB 48200CTB 48250CTB 48300CTB 48370CTB 48430CTB 76250CTB 76300CTB 76370CTB 76540CTB 90530CTB

Size

Bags 25100CTN 36140CTN 36200CTN 45180CTN 45200CTN 45300CTN 48160CTN 48200CTN 48250CTN 48300CTN 48370CTN 48430CTN 76250CTN 76300CTN 76370CTN 76540CTN 90530CTN

2.5 x 100 3.6 x 140 3.6 x 200 4.5 x 180 4.5 x 200 4.5 x 300 4.8 x 160 4.8 x 200 4.8 x 250 4.8 x 300 4.8 x 370 4.8 x 430 7.6 X 250 7.6 x 300 7.6 x 370 7.6 x 540 9.0 x 530

8.10 18.20 18.20 22.20 22.20 22.20 22.20 22.20 22.20 22.20 22.20 22.20 54.40 54.40 54.40 54.40 79.40

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Size

Tensile Strength

Qty

A simple solution for attaching a cable tie to masonry or timber.

2.5 x 100

22.20

200

Product Code

* 50 of each colour (Yellow, Green, Red & Blue)

(mm)

Drill Hole Size (mm)

Qty

8 x 40

8

100

Size

Bags 840CTP

60

Qty

CABLE TIE PLUGS

Bags 48200CTMIX

Tensile Strength

Size

Bags

COLOURED CABLE TIES*

Product Code

(mm)


HOOKS & EYES

FIXINGS & FASTENERS

HOOKS & EYES PICTURE HOOK SET

SCREW HOOKS -

For hanging pictures.

A medium duty versatile solution for either hanging or attaching items to timber or masonry with the use of a plug.

Product Code

Part

Qty

Wire (Ø 0.92mm x 3.5m) No.2 Single Hook No.3 Double Hook No.2 & No.3 Mixed Hooks

1 12 4 8

Packs 35BWP 2PHSP 3PHDP MPHP

ROUND CUP HOOKS

Size

Colour

(mm)

Qty

Packs 19SHBP 25SHBP 25SHWP 38SHBP 38SHWP

19 25 25 38 38

Brass Brass White Brass White

15 10 6 5 4

A light duty horizontal hook to be used into wood for hanging small items. Product Code

Size (mm)

Product Code

60 80 100

4 3 2

Zinc

Size (mm)

Qty

Packs 30SEP 40SEP 45SEP 55SEP

30 40 45 55

15 10 5 4

Zinc

There are multiple uses but commonly used to thread string or wire to train plants up fences or walls with the use of a plug.

Qty

Product Code

16 8

75VEP 100VEP

Size (mm)

Qty

Packs

Packs 25SQBP 38SQBP

Qty

A medium duty versatile solution for either hanging or attaching items to timber or masonry with the use of a plug.

VINE EYES -

SQUARE CUP HOOKS

Size (mm)

Packs 60SHP 80SHP 100SHP

SCREW EYES -

A light duty horizontal or vertical hook to be used into wood for hanging small items such as keys. Available in a brass or white finish. Product Code

Product Code

Zinc

25 38

4.3 x 75 4.3 x 100

4 2

61


SANITARY FIXINGS

FIXINGS & FASTENERS

Materials

SANITARY FIXINGS For fixing bathroom fixtures

Complete fixing kits for quick and easy installation of sanitary ware including wash basins, toilets and bidets. Suitable for use with a variety of solid building materials including concrete, natural stone, brick and timber.

BASIN FIXING KITS

PAN/BIDET FIXING KITS

Installation Guide

Installation Guide

Designed to securely mount washbasins to a variety of solid building materials. Countersunk nylon bushes designed to ensure no damage is done to the basin during installation. *Can also be used into wood without nylon plugs.

Designed for floor fixing pan/bidets into a variety of solid building materials. Countersunk nylon bushes designed to ensure no damage is done to the fixture during installation. Flat caps for a concealed finish. *Can also be used into wood without nylon plugs.

LIGHT DUTY Product Code

Description

Size (mm)

Item Qty

Nylon Plugs Stud Screws Nylon Bushes Washers Hex Full Nuts

10 M8 x 100 M8 M8 M8

2 2 2 2 2

Bags LDBK

Description

Size (mm)

Item Qty

Nylon Plugs Stud Screws Nylon Bushes Washers Hex Full Nuts

14 M10 x 140 M10 M10 M10

2 2 2 2 2

Bags HDBK

62

Description

Size (mm)

Item Qty

Nylon Plug Hex Slotted Coach Screws Nylon Bushes White Flat Caps

10 6 x 80 6 18

2 2 2 2

Bags

HEAVY DUTY Product Code

Product Code

PBK


SANITARY FIXINGS

FIXINGS & FASTENERS

CLOAKROOM BASIN FIXING KITS

ADJUSTABLE WC FIXING KITS

Installation Guide

Installation Guide

Designed to fix cloakroom basins to a variety of solid building materials. *Can also be used into wood without nylon plugs.

Designed to fix WC pan/bidets to a variety of solid building materials. Fully adjustable for a quick easy installation. Countersunk nylon bushes designed to ensure no damage is done to the fixture during installation. *Can also be used into wood without nylon plugs.

Product Code

Description

Size (mm)

Item Qty

Basin Brackets Nylon Plugs Washers Hex Head Coach Screws

10 7 7 x 60

2 2 2 2

Bags CBK

Product Code

Description

Size (mm)

Item Qty

Nylon Support Bracket Nylon Plug Hex Slotted Coach Screws Nylon Bushes Washers Screws Chrome Cover Caps

10 6 x 70 5 6 4.5 x 40 18

2 2 2 2 2 2 2

Bags

WCBK

63


PIPE CLIPS

FIXINGS & FASTENERS

PIPE CLIPS Designed and manufactured to accommodate today’s standard pipe sizes. Manufactured in the UK using a high quality polypropylene to prevent snapping and to give a secure fixing.

SINGLE QUICK LOCK PIPE CLIP

QUICK LOCK SPACER

A robust range of clips designed to withstand repeated opening and closing offering 360° degree pipe retention. The clips provide a very secure grip when the pipe is in place and the snap tight locking top offers complete security of the pipe. The high standoff allows for lagging and heat circulation.

The Quick Lock spacer is designed to suit all single clips to allow a greater stand-off where site conditions apply or where thicker lagging is used.

Product Code

Product Code

Screw Size (Imp.)

Size (mm)

Qty

3.5 - 4.5

6, 7, 8

13

50

Bags QSP1

Screw Size (mm)

Screw Size (Imp.)

Size (mm)

Qty

3.5 - 4.5 3.5 - 4.5 3.5 - 4.5

6, 7, 8 6, 7, 8 6, 7, 8

15 22 28

50 50 50

Bags QS15 QS22 QS28

Screw Size (mm)

SINGLE OPEN PIPE CLIP The single open clip provides a strong and reliable snap fit pipe fixing, installed using either No.8 or No.10 woodscrews.

NAIL IN PIPE CLIP Product Code

Zinc plated hardened and tempered nail suitable for all types of masonry.

Size (mm)

Qty

10 15 22

50 50 50

Size (mm)

Qty

3.5 - 4.5 3.5 - 4.5 3.5 - 4.5

6, 7, 8 6, 7, 8 6, 7, 8

15 22 28

50 50 50

SINGLE HINGED PIPE CLIP

Bags NCW10 NCW15 NCW22

Screw Size (Imp.)

Bags OPS15 OPS22 OP28

Product Code

Screw Size (mm)

The single hinged clip is available in sizes to fit MDPE pipe, in blue to match the pipe colour.

Product Code

Screw Size (mm)

Screw Size Size (Imp.) (mm)

To Fit Qty (mm)

Bags TMS20 TMS25 TMS35

64

3.5 - 4.5 3.5 - 4.5 3.5 - 4.5

6, 7, 8 6, 7, 8 6, 7, 8, 10

20 25 35

19 - 21 10 25 - 27.4 10 31.8 - 35 10


PLASTERBOARD FIXINGS 66 - SPRING TOGGLES 66 - HAMMER-IN FIXINGS

67 - METAL CAVITY ANCHORS 67 - SPEED PLUGS


PLASTERBOARD FIXINGS

HAMMER-IN & SPRING TOGGLES

HAMMER-IN FIXINGS

Materials

Light duty fixtures into plasterboard

A rapid light duty plasterboard fixing for use in a wide range of applications. Serrated point for easy hammering and quick installation. Supplied with screws. Installation Guide

Product Code

Screw ØxL

MFT (mm)

Qty

4 x 30

6

100

Boxes HPF30

MFT = Max Fixture Thickness

Materials

SPRING TOGGLES

Ideal for ceiling installations A cavity fixing that is ideal for overhead installations. The wings spread the load over a wider area making them more suited for heavier loads. Product Code

Thread Drill Screw Ø Hole Ø Length

WFT

Qty

Boxes Installation Guide

TOG350 TOG550 TOG575 TOG5100 TOG675

M3 M5 M5 M5 M6

11 14 14 14 18

50 50 75 100 75

30 20 45 70 45

100 100 100 100 100

M5 M5

14 14

50 75

20 45

55 50

Bags TOG550B TOG575B

WFT = Wall and Fixture Thickness

66


CAVITY ANCHORS & SPEED PLUGS

PLASTERBOARD FIXINGS

METAL CAVITY ANCHORS

Materials

For a secure fixing into plasterboard

A cavity fixing that is ideal for hanging radiators, brackets, hand rails and shelving units. When installing multiple anchors a setting tool is recommended. Installation Guide

SETTING TOOL A handy and efficient tool used to set cavity anchors. TIMco Code: SETOOL

Product Code

Screw ØxL

Drill Hole Ø

FCH Ø

Grip Board

Qty Product Code

Boxes 40038CA 40045CA 40060CA 50037CA 50052CA 50065CA 60052CA 60065CA

M4 x 45 M4 x 50 M4 x 65 M5 x 45 M5 x 60 M5 x 70 M6 x 60 M6 x 70

8 8 8 10 10 10 12 12

4 4 4 5 5 5 6 6

8-16 16-23 31-38 6-13 7-16 17-32 7-16 17-32

100 100 100 100 100 100 100 100

FCH = Fixture Clearance Hole

SPEED PLUGS

Light duty applications into plasterboard. Installation Guide

Materials

Screw ØxL

Drill Hole Ø

FCH Ø

Grip Board

Qty

10 10 12

5 5 6

6-13 7-16 17-32

70 60 40

10 10

5 5

6-13 7-16

4 3

Bags 50037CAB M5 x 45 50052CAB M5 x 60 60065CAB M6 x 70

Packs 50037CAP M5 x 45 50052CAP M5 x 60

A rapid light duty plasterboard fixing for use in a wide range of applications. Cross-recess head, allows simple installation with a screw driver. Metal plugs comes complete with screws.

METAL SPEED PLUGS With screws

NYLON SPEED PLUGS

Ideal for electrical installations

Product Code

Plug Length (mm)

Screw Ø x L (mm)

(mm)

31.5

4.5 x 30

6

300

31.5

4.5 x 30

6

100

31.5

4.5 x 30

6

75

31.5

4.5 x 30

6

5

MFT

Qty

Tubs TBAZST

Boxes TBAZS Product Code

Plug Length (mm)

Qty

TBAZSB

Packs

Boxes TBAN*

Bags

42

100

*6mm pre-drilled hole may be required in harder plasterboards.

TBAZSP

MFT = Max Fixture Thickness

67


CONCRETE & MASONRY ANCHORS 69 - PLASTIC PLUGS 69 - EXPRESS NAILS 69 - FLANGE CLIP 70 - CEILING ANCHORS 70 - NAIL IN ANCHORS 70 - WIRE HANGER ANCHORS 71 - INSULATION FIXINGS

72 - NYLON FIXINGS 73 - MULTI-FIX SCREWS 74 - MULTI-FIX BOLTS 75 - THROUGHBOLTS 75 - DROP IN ANCHORS 76 - SHIELD ANCHORS 77 - EYES & HOOKS

78 - THREADED BAR 78 - CHEMICAL STUDS 79 - MULTI-FIX RESIN 80 - GUNS 81 - RESIN ACCESSORIES


PLASTIC PLUGS & EXPRESS NAILS

PREMIUM PLASTIC PLUGS

CONCRETE & MASONRY ANCHORS

EXPRESS NAILS

Light duty general purpose anchor

Improved pull-out loads Materials An underestimated rapid hammer-set anchor for concrete and masonry, ideal for interior timber-work such as battens and frames. Large trade bags of premium plugs with improved pull-out loads when compared to standard plugs. Anti-rotation fins to prevent spinning. Loose and off the sprig for quicker and more convenient installation on site

Materials

Installation Guide Installation Guide 2 Hammer express

Product Code

Length Screw Ø Screw Colour Qty (mm) (Imp.) Ø (mm)

Bags RPLUGPREM Red BPLUGPREM Brown

34 42

6-10 10-14

3.5-4.8 1000 4.8-6.3 1000

PLASTIC PLUGS

nail through fixture into hole.

ØxL

Drill Hole Ø

MFT

FCH Ø

Qty

6 x 50 6 x 60 6 x 80 8 x 70 8 x 90 8 x 110 8 x 130 8 x 150 8 x 180

6 6 6 8 8 8 8 8 8

20 30 50 30 50 70 90 110 140

7 7 7 9 9 9 9 9 9

200 100 100 100 50 50 50 50 50

00660ENB 6 x 60 00680ENB 6 x 80 00890ENB 8 x 90 08110ENB 8 x 110 08150ENB 8 x 150

6 6 8 8 8

30 50 50 70 110

7 7 9 9 9

90 70 40 35 30

Product Code

Boxes 00650EN 00660EN 00680EN 00870EN 00890EN 08110EN 08130EN 08150EN 08180EN

Bags

All-purpose, cost effective fixing

VERTICAL FLANGE CLIP High strength fixing to steel Suitable for all kinds of concrete and masonry substrate materials. Ideal for medium and lightweight applications. It may be beneficial to reduce drill diameter in soft materials. Length Screw Product Colour Code (mm) Ø (Imp.)

Screw Ø (mm)

Qty

3.0 - 4.5 3.5 - 5.0 4.5 - 6.0 6.0 - 8.0

100 100 100 40

Boxes YPLUG RPLUG BPLUG BLPLUG

Yellow Red Brown Blue

25 30 36 48

4-8 6 - 10 8 - 12 12 - 15

High strength vertical flange clip for fixing suspended wire and lighting to steel profiles. Product Code

Size (mm)

Qty

20 x 42

100

Bags VFC2042

69


CONCRETE & MASONRY ANCHORS

CEILING, NAIL IN & WIRE HANGER ANCHORS

CEILING ANCHORS

Materials

Ideal for brackets on suspended ceilings

A rapid light duty hammer-set anchor for attaching sheet metal, plastic or wood to concrete or masonry. Made from steel making it ideal for overhead applications. Installation Guide

Product Code

ØxL

Drill Hole Ø

MFT

FCH Ø

Qty

6 x 40 6 x 65

6 6

5 30

6.5 6.5

100 100

Boxes 2 Push ceiling anchor into hole.

3 Hammer

wedge into anchor to secure.

0640CAM 0665CAM

MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole

NAIL IN ANCHORS

Materials

Light duty general purpose anchor

A rapid light duty hammer-set anchor for attaching sheet metal, plastic or wood to concrete or masonry. Note: Not suitable for overhead applications. Installation Guide

Product Code

ØxL

Drill Hole Ø

MFT

FCH Ø

Qty

6 x 30 6 x 40 6 x 50 6 x 65

6 6 6 6

5 15 25 40

6.5 6.5 6.5 6.5

100 100 100 100

Boxes 0630ZNA 0640ZNA 0650ZNA 0665ZNA

MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole

WIRE HANGERS

Materials

Mainly for fixing lightweight ceilings

Specifically designed for use in the suspended ceiling industry when securing suspension wires to concrete beams.

Installation Guide

Product Code

ØxL

Drill Hole Ø

Eye Ø

Qty

6 x 60

6

6.3

100

Boxes 0660WH

MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole

70


INSULATION FIXINGS

CONCRETE & MASONRY ANCHORS

METAL INSULATION FIXINGS

LARGE METAL INSULATION DISC

Designed for fixing insulation

Specifically used with MIF.

Designed to anchor insulation material to concrete and masonry substrate materials.

Provides a larger surface area when using metal insulation fixings to hold lighter or softer insulation to masonry. Simply slide the fixing through, prior to installation.

Materials

Product Code

Head Ø (mm)

Hole Size Ø

Qty

80

5.0

50

Bags MID80

Installation Guide

METAL INSULATION DISC Product Code

ØxL

Drill Hole Ø

MFT

Qty

8 x 60 8 x 90 8 x 110 8 x 140 8 x 170 8 x 200

8 8 8 8 8 8

10 40 60 90 120 150

100 100 100 100 50 50

Bags MIF60 MIF90 MIF110 MIF140 MIF170 MIF200

MFT = Max Fixture Thickness

PLASTIC INSULATION FIXINGS

Large diameter head for use with screws to hold insulation material to battens. Also used for ceiling crack repairs. Product Code

Head Ø (mm)

Hole Size Ø

Qty

35

5.0

100

Bags MID35

Designed for fixing insulation

PLASTIC COVER CAP FOR METAL INSULATION FIXINGS

Designed to anchor insulation material to concrete and masonry substrate materials. One piece impact resistant copolymer. Product Code

ØxL

Drill Hole Ø

MFT

Qty

8 x 50 8 x 70 8 x 90 8 x 110 8 x 130

8 8 8 8 8

1-20 20-40 50-60 70-80 90-100

100 100 100 100 100

For aesthetics, where metal insulation fixing heads are left exposed after installation. Used for attaching insulation to timber..

Bags PIF50 PIF70 PIF90 PIF110 PIF130

Product Code

Head Ø (mm)

Qty

38

100

Bags MIFC

71


NYLON FIXINGS

CONCRETE & MASONRY ANCHORS

NYLON FIXINGS

Materials

Fixes multiple applications into masonry/brick. Installation Guide

Installation Guide

HAMMER FIXINGS

FRAME FIXINGS

A versatile and reliable fixing for attaching to brick, block, stone, masonry and concrete. Product Code

ØxL

Drill Hole Ø

MFT

Qty

8 x 80 8 x 100 8 x 120 10 x 80 10 x 100 10 x 120 10 x 140 10 x 160

8 8 8 10 10 10 10 10

40 60 80 30 50 70 90 110

100 100 100 100 100 100 100 100

8 x 80 8 x 100 10 x 100 10 x 120 10 x 140 10 x 160

8 8 10 10 10 10

40 60 50 70 90 110

50 40 30 25 20 15

8 x 80 8 x 100 10 x 100 10 x 120 10 x 140 10 x 160

8 8 10 10 10 10

40 60 50 70 90 110

5 4 3 2 2 2

Boxes 08080NFF 08100NFF 08120NFF 10080NFF 10100NFF 10120NFF 10140NFF 10160NFF

Packs 08080NFFP 08100NFFP 10100NFFP 10120NFFP 10140NFFP 10160NFFP

FRAME ANCHORS

A traditional fixing for attaching doors and window frames to masonry. Product Code

ØxL

Drill Hole Ø

MFT

Qty

8 x 100 8 x 120 8 x 140 10 x 100 10 x 120 10 x 140

8 8 8 10 10 10

50 70 90 50 70 90

100 100 100 100 100 100

Boxes 08100NFA 08120NFA 08140NFA 10100NFA 10120NFA 10140NFA

72

Product Code

ØxL

Drill Hole Ø

MFT

Qty

5 x 30 5 x 50 6 x 40 6 x 50 6 x 60 6 x 70 6 x 80 8 x 60 8 x 80 8 x 100 8 x 120 8 x 140

5 5 6 6 6 6 6 8 8 8 8 8

5 25 15 25 35 45 55 20 40 60 80 100

200 200 200 200 200 200 200 100 100 100 100 100

6 x 40 6 x 60 6 x 80 8 x 100

6 6 6 8

15 35 55 60

135 100 80 40

6 x 40 6 x 60 6 x 80 8 x 100

6 6 6 8

15 35 55 60

10 10 10 8

Boxes

Bags 08080NFFB 08100NFFB 10100NFFB 10120NFFB 10140NFFB 10160NFFB

A light duty hammer-set through fixing for masonry.

50030HF 50050HF 60040HF 60050HF 60060HF 60070HF 60080HF 80060HF 80080HF 80100HF 80120HF 80140HF

Bags 60040HFB 60060HFB 60080HFB 80100HFB

Packs 60040HFP 60060HFP 60080HFP 80100HFP


MULTI-FIX SCREWS

CONCRETE & MASONRY ANCHORS

MULTI-FIX SCREWS

Materials

Fixes into multiple materials Available in:

Installation Guide

Yellow

Zinc (CR3)

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and hammer fixings.

CONCRETE SCREW -

CONCRETE SCREW -

Yellow

Countersunk with high/low start thread

FCH Qty Ø

Pan Head with high/low start thread

ØxL

Drill Hole Ø

MFT

7.5 x 40 7.5 x 50 7.5 x 60 7.5 x 70 7.5 x 80 7.5 x 90 7.5 x 100 7.5 x 110 7.5 x 120 7.5 x 130 7.5 x 150 7.5 x 180 7.5 x 200

6 6 6 6 6 6 6 6 6 6 6 6 6

5 15 25 35 30 40 50 60 70 80 100 130 150

8 8 8 8 8 8 8 8 8 8 8 8 8

100 100 100 100 100 100 100 100 100 100 100 100 100

7580MFPAN 7.5 x 80 75100MFPAN 7.5 x 100 75120MFPAN 7.5 x 120

00080TCONB 7.5 x 80 00100TCONB 7.5 x 100 00120TCONB 7.5 x 120 00200TCONB 7.5 x 150

6 6 6 6

30 50 70 150

8 8 8 8

65 55 45 30

Product Code

Product Code

Boxes 00040TCON 00050TCON 00060TCON 00070TCON 00080TCON 00090TCON 00100TCON 00110TCON 00120TCON 00130TCON 00150TCON 00180TCON 00200TCON

Zinc (CR3)

Product Code

ØxL

Drill Hole Ø

MFT

6 6 6

30 50 70

FCH Qty Ø

Boxes 8 8 8

MASONRY SCREW -

100 100 100

Zinc (CR3)

Countersunk

Bags

Packs 00080TCONP 7.5 x 80 00100TCONP 7.5 x 100 00120TCONP 7.5 x 120 00200TCONP 7.5 x 200

6 6 6 6

30 50 70 150

8 8 8 8

5 4 3 2

ØxL

Drill Hole Ø

MFT

FCH Ø

Qty

6 x 40 6 x 60 6 x 80 6 x 100

5 5 5 5

15 35 55 63

6.5 6.5 6.5 6.5

100 100 100 100

Boxes 640MFCSK 660MFCSK 680MFCSK 6100MFCSK

Cover Caps CAPW100 CAP0100 CAPM100

White Light Oak Mahogany

100 100 100

MASONRY SCREW -

MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole

MIXED PACK -

Yellow

Product Code

Size ØxL

Qty

Product Code

7.5 x 80 7.5 x 100 7.5 x 120 6 x 160 - SDS Drill Bit T30 TIM Driver Bit

100 100 100 1 1

640MFPAN 6 x 40 660MFPAN 6 x 60 680MFPAN 6 x 80 6100MFPAN 6 x 100

Boxed TCONPACK

Zinc (CR3)

Pan Head

Boxes

ØxL

Drill Hole Ø

MFT

FCH Ø

Qty

5 5 5 5

15 35 55 63

6.5 6.5 6.5 6.5

100 100 100 100

MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole

73


CONCRETE & MASONRY ANCHORS

MULTI-FIX BOLT

MULTI-FIX BOLT

Materials

Heavy duty non-expansion anchor Available in:

Exterior

This stress free, non-expansion through fixing is the new solution for heavy duty anchoring into concrete, brick, stone, wood and concrete block replacing the need for traditional anchors such as throughbolts, shield, sleeve and drop-in anchors. Installation Guide Product Code

ØxL

Drill Hole Ø

6 x 50 6 x 75 6 x 100 6 x 130 6 x 150 8 x 60 8 x 75 8 x 100 8 x 130 8 x 150 10 x 60 10 x 75 10 x 100 10 x 130 10 x 150 12 x 75 12 x 100 12 x 130 12 x 150 12 x 200 16 x 100 16 x 150

6 6 6 6 6 8 8 8 8 8 10 10 10 10 10 12 12 12 12 12 16 16

MFT

FCH Ø

Qty

20 45 55 85 105 20 35 60 90 110 10 25 50 80 100 15 40 70 90 140 20 70

8 8 8 8 8 10 10 10 10 10 12 12 12 12 12 14 14 14 14 14 18 18

100 100 100 100 75 100 100 50 50 50 50 50 50 50 25 50 25 25 25 25 10 10

Boxes MF650 MF675 MF6100 MF6130 MF6150 MF860 MF875 MF8100 MF8130 MF8150 MF1060 MF1075 MF10100 MF10130 MF10150 MF1275 MF12100 MF12130 MF12150 MF12200 MF16100 MF16150

MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole

MULTI-FIX BOLT - PAN HEAD

Product Code

ØxL

Drill MFT Hole Ø

FCH Ø

Qty

10 10 10 12 12 12

100 100 50 50 50 50

Boxes MF860P MF875P MF8100P MF1060P MF1075P MF10100P

ØxL

Drill Hole Ø

MFT

FCH Ø

Qty

6 x 50 8 x 60 8 x 75 8 x 100 10 x 60 10 x 75 10 x 100 10 x 150 12 x 75 12 x 100 12 x 130 12 x 150

6 8 8 8 10 10 10 10 12 12 12 12

20 20 35 60 10 25 50 100 15 40 70 90

8 10 10 10 12 12 12 12 14 14 14 14

64 30 26 18 14 12 8 12 8 6 6 6

Bags MF650B MF860B MF875B MF8100B MF1060B MF1075B MF10100B MF10150B MF1275B MF12100B MF12130B MF12150B

MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole

MULTI-FIX BOLT - COUNTERSUNK

Product Code

ØxL

Drill MFT Hole Ø

FCH Ø

Qty

10 10 10 12 12 12

100 100 50 50 50 50

Boxes 8 x 60 8 x 75 8 x 100 10 x 60 10 x 75 10 x 100

8 8 8 10 10 10

20 35 60 10 25 50

MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole

74

Product Code

MF860C MF875C MF8100C MF1060C MF1075C MF10100C

8 x 60 8 x 75 8 x 100 10 x 60 10 x 75 10 x 100

8 8 8 10 10 10

20 35 60 10 25 50

MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole


THROUGHBOLTS & DROP IN ANCHORS

CONCRETE & MASONRY ANCHORS

THROUGHBOLTS

DROP IN ANCHORS

Heavy duty applications into concrete

Materials

Materials

The versatile through fixing for use in a wide range of anchoring applications into concrete.

An internally threaded hammer set expansion anchor for heavy duty anchoring into concrete.

Installation Guide

Installation Guide

Product Code

Thread ØxL

Drill Hole Ø

MFT

FCH Ø

Qty

M8 x 50 M8 x 65 M8 x 80 M8 x 100 M8 x 130 M10 x 65 M10 x 75 M10 x 100 M10 x 120 M12 x 80 M12 x 100 M12 x 120 M12 x 140 M12 x 180 M16 x 105 M16 x 125 M16 x 150 M16 x 175 M20 x 130 M20 x 160 M20 x 215

8 8 8 8 8 10 10 10 10 12 12 12 12 12 16 16 16 16 20 20 20

5 10 25 45 75 5 10 35 55 5 25 45 65 105 5 20 45 70 5 30 85

9 9 9 9 9 12 12 12 12 14 14 14 14 14 18 18 18 18 22 22 22

100 100 50 50 50 50 50 50 50 50 25 25 25 25 25 25 15 15 10 10 8

M8 x 50 M10 x 100 M12 x 100 M12 x 120 M12 x 140

8 10 12 12 12

5 35 25 45 65

9 12 14 14 14

40 18 12 10 8

SETTING TOOL

M8 x 50 M10 x 100 M12 x 100 M12 x 140

8 10 12 12

5 35 25 65

9 12 14 14

4 2 2 2

Product Code

Boxes 0850TB 0865TB 0880TB 08100TB 08130TB 1065TB 1075TB 10100TB 10120TB 1280TB 12100TB 12120TB 12140TB 12180TB 16105TB 16125TB 16150TB 16175TB 20130TB 20160TB 20215TB

Product Code

Thread Drill Ø Hole Ø

Anchor Length

FCH Ø

Qty

25 30 40 50

8 10 12 14

100 100 50 50

Anchor Length

FCH Ø

Qty

30 30

10 12

100 50

Boxes 06WA 08WA 10WA 12WA

M6 M8 M10 M12

8 10 12 16

LIPPED

Product Code

Thread Drill Ø Hole Ø

Boxes 08LWA 1030LWA

M8 M10

10 12

Bags 0850TBB 10100TBB 12100TBB 12120TBB 12140TBB

Packs 0850TBP 10100TBP 12100TBP 12140TBP

MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole

To Fit Anchor Size

Qty

M6 M8 M10 M12

1 1 1 1

Boxes 06WAS 08WAS 10WAS 12WAS

75


SHIELD ANCHORS CONCRETE & MASONRY ANCHORS FORGED EYES & HOOKS

SHIELD ANCHORS Available in:

Materials

Yellow

Installation Guide A traditional metal expansion anchor designed for anchoring into masonry and concrete.

LOOSE BOLTS

PROJECTING BOLTS

A three segmented expansion anchor used in concrete, brick or stone. Grade 8.8. Thread ØxL

Drill Hole Ø

MFT

FCH Ø

Qty

M6 x 50 M6 x 65 M8 x 60 M8 x 75 M8 x 90 M10 x 70 M10 x 85 M10 x 110 M10 x 135 M12 x 90 M12 x 105 M12 x 120 M12 x 140 M16 x 135 M16 x 165

12 12 14 14 14 16 16 16 16 20 20 20 20 24 24

10 25 10 25 40 10 25 50 75 10 25 40 60 30 60

8 8 10 10 10 12 12 12 12 14 14 14 14 18 18

100 50 50 50 25 25 25 25 25 10 10 10 10 10 10

0610LSHB M6 x 50 0625LSHB M6 x 65 0810LSHB M8 x 60 0825LSHB M8 x 75 0840LSHB M8 x 90 1010LSHB M10 x 70 1025LSHB M10 x 85 1050LSHB M10 x 110 1075LSHB M10 x 135 1260LSHB M12 x 140

12 12 14 14 14 16 16 16 16 20

10 25 10 25 40 10 25 50 75 60

8 8 10 10 10 12 12 12 12 14

48 46 26 24 22 22 16 14 14 10

12 12 14 14 14 16 16 16 16 20

10 25 10 25 40 10 25 50 75 60

8 8 10 10 10 12 12 12 12 14

4 4 4 4 4 4 2 2 2 2

Product Code

Boxes 0610LSH 0625LSH 0810LSH 0825LSH 0840LSH 1010LSH 1025LSH 1050LSH 1075LSH 1210LSH 1225LSH 1240LSH 1260LSH 1630LSH 1660LSH

Bags

Packs 0610LSHP M6 x 50 0625LSHP M6 x 65 0810LSHP M8 x 60 0825LSHP M8 x 75 0840LSHP M8 x 90 1010LSHP M10 x 70 1025LSHP M10 x 85 1050LSHP M10 x 110 1075LSHP M10 x 135 1260LSHP M12 x 140

76

A three segmented expansion anchor used in concrete, brick or stone. Grade 5.8. Thread ØxL

Drill Hole Ø

MFT

FCH Ø

Qty

M6 x 110 M8 x 70 M8 x 85 M8 x 120 M10 x 85 M10 x 100 M10 x 130 M12 x 105 M12 x 120 M12 x 165

12 14 14 14 16 16 16 20 20 20

60 10 25 60 15 30 60 15 30 75

8 10 10 10 12 12 12 14 14 14

50 50 50 50 25 25 25 10 10 10

0825PSHB M8 x 85 0860PSHB M8 x 120 1015PSHB M10 x 85 1030PSHB M10 x 100 1060PSHB M10 x 130 1230PSHB M12 x 120

14 14 16 16 16 20

25 60 15 30 60 30

10 10 12 12 12 14

26 22 16 15 14 8

14 14 16 16 16 20

25 60 15 30 60 30

10 10 12 12 12 14

4 4 2 2 2 2

Product Code

Boxes 0660PSH 0810PSH 0825PSH 0860PSH 1015PSH 1030PSH 1060PSH 1215PSH 1230PSH 1275PSH

Bags

Packs 0825PSHP M8 x 85 0860PSHP M8 x 120 1015PSHP M10 x 85 1030PSHP M10 x 100 1060PSHP M10 x 130 1230PSHP M12 x 120

MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole


FORGED EYES & HOOKS INSULATION THROUGHBOLTS FIXINGS

CONCRETE & MASONRY ANCHORS

FORGED EYES & HOOKS Available in:

Materials

Yellow

FORGED EYES

FORGED EYES WITH SHIELDS

A useful threaded eye bolt for attaching ropes or cables.

Complete with three segment shield anchors, a forged eye for extra strength.

Product Code

Product Code

Thread Ø

Thread Length

Eye Ø

Qty

M6 M8 M10 M12

50 60 73 95

8 10 12 16

50 50 50 25

Boxes 06EYE 08EYE 10EYE 12EYE

Thread Ø

Thread Length

Eye Ø

Qty

M6 M8

50 60

8 10

18 14

M6 M8

50 60

8 10

2 2

Bags 06EYEB 08EYEB

Packs 06EYEP 08EYEP

FORGED HOOKS

FORGED HOOKS WITH SHIELDS

A useful threaded hook bolt for attaching ropes or cables.

A useful threaded hook bolt with shield for attaching ropes or cables.

Product Code

Product Code

Thread Ø

Thread Length

Qty

M6 M8 M10 M12

50 60 73 90

50 50 50 25

Boxes 06HOOK 08HOOK 10HOOK 12HOOK

Thread Ø

Thread Length

Qty

M6 M8

50 60

20 16

06HOOKP 08HOOKP

M6 M8

50 60

2 2

Product Code

Thread Ø

Shield Length

Qty

M6 M8 M10 M12

45 50 60 75

50 50 50 25

Bags

SHIELD ONLY

06HOOKB 08HOOKB

Packs

Boxes

A three segmented expansion anchor used in concrete, brick or stone with most types of metric threaded component.

06SH 08SH 10SH 12SH

77


CONCRETE & MASONRY ANCHORS

THREADED BAR & ANCHOR STUDS

THREADED BAR

HIGH TENSILE THREADED BAR - Used with drop in anchors

Available in:

Available in:

Used with drop in anchors Zinc

A2/Aust.SS

Zinc

1 METER LENGTHS Product Code

A versatile fully threaded bar used for hanging, connecting or fixing.

1 METER LENGTHS Product Code

Thread x Length (mm)

Qty

Thread x Length

Qty

(mm)

Packs M6 x 1000 M8 x 1000 M10 x 1000 M12 x 1000 M16 x 1000 M20 x 1000

06TBZHT 08TBZHT 10TBZHT 12TBZHT 16TBZHT 20TBZHT

10 10 10 10 10 5

Packs 06TBZ 08TBZ 10TBZ 12TBZ 16TBZ 20TBZ

M6 x 1,000 M8 x 1,000 M10 x 1,000 M12 x 1,000 M16 x 1,000 M20 x 1,000

10 10 10 10 10 5

CHEMICAL ANCHOR STUDS Used with Multi-Fix resin Available in:

Zinc

Galv

SHORTER LENGTHS (300mm) Product Code

Thread x Length (mm)

Qty

Packs 06300TBZ 08300TBZ 10300TBZ 12300TBZ 16300TBZ

M6 x 300 M8 x 300 M10 x 300 M12 x 300 M16 x 300

THREADED BAR -

External hex drive. Can be used with Multi-Fix resin. Embedment depth mark. Zinc plated and passivated (3-5 microns) or hot dipped galvanised finishes. Chisel point prevents the rod turning when tightening. *Chisel point nut setter included.

10 10 10 10 10

CHEMICAL ANCHOR STUDS -

A2/Aust.SS

Product Code

1 METER LENGTHS Product Code

Thread x Length (mm)

Qty

Packs (1000mm) 06TBSS 08TBSS 10TBSS 12TBSS 16TBSS 20TBSS

M6 x 1000mm M8 x 1000mm M10 x 1000mm M12 x 1000mm M16 x 1000mm M20 x 1000mm

5 5 5 5 5 5

Thread Ø x Length

MFT

M8 x 110 M10 x 130 M12 x 160 M16 x 190 M20 x 270

13 20 25 35 55

Zinc

Clearance Qty Hole Ø

Boxes 08110CS 10130CS 12160CS 16190CS 20270CS

10 12 14 18 24

10 10 10 10 4

MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole

CHEMICAL ANCHOR STUDS Product Code

Thread Ø x Length

MFT

M8 x 110 M10 x 130 M12 x 160 M16 x 190 M20 x 270

13 20 25 35 55

Galv

Clearance Qty Hole Ø

Boxes 08110CSG 10130CSG 12160CSG 16190CSG 20270CSG

10 12 14 18 24

10 10 10 10 4

MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole

78


MULTI-FIX RESIN

CONCRETE & MASONRY ANCHORS

MULTI-FIX RESIN Multi-Fix resin range offers an effective anchoring system for fixing into concrete and masonry. The stress-free nature of this solution gives greater flexibility when anchoring closer to a substrate edge such as balustrade installation.

Materials

VINYLESTER STYRENE FREE

FIRE RATED R240

1501537

European Technically Approved (ETA) low odour resin to be used in safety critical fixing. For enclosed, poorly ventilated, damp and wet environments. This high performance resin will give consistent results in a wide range of environments and conditions, whilst offering exceptional tensile strength.

Product Code

410ml

ETA / CE

Materials

Product Code

Size

Approval

300ml

ETA / CE

Singles PESF310

(Not suitable in concrete that is or may become damp).

Materials

POLYESTER RESIN

Product Code

An economic resin ideal for day to day non-safety critical applications that are well ventilated at the time of installation.

Approval

Singles VESF410

POLYESTER STYRENE FREE RESIN

European Technically Approved (ETA) low odour resin, for day to day non-safety critical fixing. For enclosed or poorly ventilated environments.

Size

Size

Approval

300ml 410ml

N/A N/A

Singles PE310 PE410

(Not suitable in concrete that is or may become damp).

79


CONCRETE & MASONRY ANCHORS

SEALANT & RESIN GUNS

SEALANT & RESIN GUNS A range of guns used with syringe type cartridge for dispensing sealants, caulk, chemical resins and adhesives.

RESIN GUN

A 64mm heavy duty resin applicator gun with twin 5mm gripper plates providing four point contact with the plunger rod. There is also a non-drip mechanism. Product Code

Description

Max Cartridge Dia (mm)

Chemical Resin Tool - 410ml

64

Singles RESINGUN

PROFESSIONAL GUN

A 48mm heavy duty sealant and caulking gun with a convenient hook end for hanging. Ergonomically designed for ease of use and a swivel action barrel for easy application into tight corners. Patented non-drip mechanism. Product Code

Description

Max Cartridge Dia (mm)

Professional Gun - 310ml

48

Singles PROGUN

SKELETON GUN

A 48mm gun for dispensing sealants, caulk and adhesives from standard syringe type cartridges. It has strengthened side plates and a 6mm gripper plate with a convenient hook end for hanging. The front cap is riveted for reinforcement and the gun comes with an integrated cleaning pin. Product Code

Description

Max Cartridge Dia (mm)

Skeleton Gun

48

Singles SKELGUN

MULTI-FIX RESIN ACCESSORY CASE Ideal for on-site storage to keep your cartridges and ancillaries safe and in one place. Product Code

To Fit

Case MFCASE300 MFCASE410

80

300ml 410ml

• 1x Resin Gun • 3x Hole Cleaning Brushes • 6x Mixer Nozzles • 4x Nylon Sleeves • 1x 190mm Blow Pump


RESIN ACCESSORIES

CONCRETE & MASONRY ANCHORS

RESIN ACCESSORIES The cleaning of drill holes prior to injecting resin is essential in order to ensure a safe fixing. Our range of accessories include the tools required to ensure effective hole cleaning. Nylon Sleeves assist with fixing into hollow block or brick and spare mixer nozzles are useful for smaller applications where a full cartridge of resin is not extruded. Resin can then be used for subsequent applications.

MIXING NOZZLES

Product Code

BLOW-OUT PUMP

Description

Qty

Product Code

Nozzle

12

PUMP

Bags

Singles

TNOZ

PLASTIC SLEEVES

Product Code

Thread Ø x L (mm)

M8 - M10 M8 - M10

Socket Hole Ø Qty Ø x L (mm) (mm)

16 x 85 16 x 130

280

HOLE CLEANING BRUSHES

Bags 1585CPS 15130CPS

Size (mm)

16 16

100 100

Product Code

Size (mm)

Qty

13 15 22

10 10 10

Bags B13 B15 B22

INTERNALLY THREADED SOCKETS Zinc

Product Code

Thread Ø x L (mm)

Socket Ø x L (mm)

Hole Ø

M10 x 25

14 x 80

16

(mm)

Qty

Boxes 10ITS

50

81


COLLATED & LOOSE NAILS 83 - CLIPPED HEAD NAILS 84 - BRAD NAILS 85 - FUEL CELLS 85 - POLYMER HEADED

86 - BRIGHT NAILS 89 - GALVANISED NAILS 92 - SHERARDISED NAILS 93 - ALUMINIUM NAILS

94 - COPPER NAILS 94 - COPPER DISC RIVETS 95 - STAINLESS STEEL NAILS 96 - MASONRY NAILS


CLIPPED HEAD COLLATED NAILS

COLLATED & LOOSE NAILS

FIRMAHOLD CLIPPED HEAD NAILS For structural applications

To BS

Available in: Bright

FirmaGalv

FirmaGalv+

Hot Dipped

EN ISO

14592:2

008

A2/Aust. SS

Tested by

*

For use in structural applications using high quality paper collation for reduced nail jams. Various levels of rust protection to comply with building regulation and meet with all service classes.

CLIPPED HEAD - GAS Product Code

Dia.

Length

Coating Type

CLIPPED HEAD - GAS Shank Type

Product Code

Boxes of 3,300 & 3 Fuel Cells

Dia.

Length

Coating Type

Shank Type

Boxes of 3,300

CBRT50G

2.8

50

Bright

Ringed

CBRT50

2.8

50

Bright

Ringed

CFGT50G

2.8

50

FirmaGalv

Ringed

CFGT50

2.8

50

FirmaGalv

Ringed

CPLT50G

2.8

50

FirmaGalv +

Ringed

CPLT50

2.8

50

FirmaGalv +

Ringed

CHDT50G

2.8

50

HDGV

Ringed

CHDT50

2.8

50

HDGV

Ringed

CBRT63G

2.8

63

Bright

Ringed

CBRT63

2.8

63

Bright

Ringed

CFGT63G

2.8

63

FirmaGalv

Ringed

CFGT63

2.8

63

FirmaGalv

Ringed Ringed

CPLT63G

2.8

63

FirmaGalv +

Ringed

CPLT63

2.8

63

FirmaGalv +

CHDT63G

2.8

63

HDGV

Ringed

CHDT63

2.8

6.3

HDGV

Ringed

CPLT63RG

3.1

63

FirmaGalv +

Ringed

CPLT63R

3.1

63

FirmaGalv +

Ringed

Boxes of 2,200 & 2 Fuel Cells

Boxes of 2,200

CBRT75G

3.1

75

Bright

Ringed

CBRT75

3.1

75

Bright

Ringed

CFGT75G

3.1

75

FirmaGalv

Ringed

CFGT75

3.1

75

FirmaGalv

Ringed

CPLT75G

3.1

75

FirmaGalv +

Ringed

CPLT75

3.1

75

FirmaGalv +

Ringed

CHDT75G

3.1

75

HDGV

Ringed

CHDT75

3.1

75

HDGV

Ringed

CFGT85PG

3.1

85

FirmaGalv

Part Ring

CBRT90

3.1

90

Bright

Plain

CBRT90G

3.1

90

Bright

Plain

CFGT90

3.1

90

FirmaGalv

Plain

CFGT90G

3.1

90

FirmaGalv

Plain

CPLT90

3.1

90

FirmaGalv +

Plain

CPLT90G

3.1

90

FirmaGalv +

Plain

CHDT90

3.1

90

HDGV

Plain

CHDT90G

3.1

90

HDGV

Plain

CPLT90PG

3.1

90

FirmaGalv +

Part Ring

Boxes of 1,100 & 1 Fuel Cell

Boxes of 1,100 CFGR50

2.8

50

FirmaGalv

Ringed

CSSR50

2.8

50

A2 SS

Ringed

CFGR50G

2.8

50

FirmaGalv

Ringed

CFGR63

2.8

63

FirmaGalv

Ringed

CFGR63G

2.8

63

FirmaGalv

Ringed

CSSR63

2.8

63

A2 SS

Ringed

CFGR75G

3.1

75

FirmaGalv

Ringed

CFGR75

3.1

75

FirmaGalv

Ringed

CFGR90G

3.1

90

FirmaGalv

Plain

CFGR90

3.1

90

FirmaGalv

Plain

CPLR63RG

3.1

63

FirmaGalv+

Ringed

CSSR50G

2.8

50

A2 SS

Ringed

CSSR63G

2.8

63

A2 SS

Ringed

*Notified Test Laboratory 2389 for EN 14592 Timber Structures - Dowel Type Fasteners - Requirements

83


COLLATED BRAD NAILS

COLLATED & LOOSE NAILS

FIRMAHOLD BRAD NAILS Perfect for indoor use Galv.

Available in:

A2/Aust. SS

Ideal for internal applications such as skirting, architrave, tongue and groove fixing, with a T head for a concealed finish. Also available in stainless steel for hardwood applications.

16 GAUGE STRAIGHT BRADS - GAS Product Code

Gauge

Length

Coating Nails Type Per Strip

Boxes of 2,000 & 2 Fuel Cells BG1619G BG1625G BG1632G BG1638G BG1645G BG1650G BG1664G BSS1638G BSS1650G

16 16 16 16 16 16 16 16 16

19 25 32 38 45 50 64 38 50

Galv. Galv. Galv. Galv. Galv. Galv. Galv. A2 SS A2 SS

50 50 50 50 50 50 50 50 50

16 GAUGE STRAIGHT BRADS - GAS Product Code

Gauge

Length

Coating Nails Type Per Strip

Boxes of 2,000 BG1619 BG1625 BG1632 BG1638 BG1645 BG1650 BG1664 BSS1638 BSS1650

16 16 16 16 16 16 16 16 16

19 25 32 38 45 50 64 38 50

Galv. Galv. Galv. Galv. Galv. Galv. Galv. A2 SS A2 SS

50 50 50 50 50 50 50 50 50

18 GAUGE STRAIGHT BRADS - GAS Product Code

Gauge

Length

Coating Nails Type Per Strip

Boxes of 5,000 BG1816 BG1819 BG1825 BG1832 BG1838 BG1845 BG1850

84

18 18 18 18 18 18 18

16 19 25 32 38 45 50

Galv. Galv. Galv. Galv. Galv. Galv. Galv.

100 100 100 100 100 100 100

16 GAUGE ANGLED BRADS - GAS Product Code

Gauge

Length

Coating Nails Type Per Strip

Boxes of 2,000 & 2 Fuel Cells ABG1632G ABG1638G ABG1645G ABG1650G ABG1664G ABSS1638G ABSS1650G

16 16 16 16 16 16 16

32 38 45 50 64 38 50

Galv. Galv. Galv. Galv. Galv. A2 SS A2 SS

50 50 50 50 50 50 50

16 GAUGE ANGLED BRADS - GAS Product Code

Gauge

Length

Coating Nails Type Per Strip

Boxes of 2,000 ABG1632 ABG1638 ABG1645 ABG1650 ABG1664 ABSS1638 ABSS1650

16 16 16 16 16 16 16

32 38 45 50 64 38 50

Galv. Galv. Galv. Galv. Galv. A2 SS A2 SS

50 50 50 50 50 50 50


FUEL CELLS & POLYMER HEADED NAILS

COLLATED & LOOSE NAILS

FUEL CELLS

For use with framing & finishing nail guns Manufactured to European standards. Cleaned propane and butane gas for improved the working environment. Fully synthetic oil for reduced carbon deposition. High quality propellant to prevent leakage and increase shelf life. Gas filled in accordance with European Regulations (75/324/EWG).

Description

Size (ml)

Qty

Framing Nailer Fuel Cell Finishing Nailer Fuel Cell

80 30

2 2

Product Code

Packs CFC BFC

CFC

BFC

POLYMER HEADED NAILS & PINS Available in:

White

Oak

Mahogany

Black

A4 SS

A coloured poly headed marine grade stainless steel pin or nail designed to secure fascia, soffit and window boards.

POLYMER HEADED NAILS

Product Code

Finish

POLYMER HEADED PINS

Size

Head Ø

(mm)

(mm)

Box Qty

Product Code

40 50 50 50 50 65 65 65

12 12 12 12 12 12 12 12

100 100 100 100 100 100 100 100

PP25M PP25W PP25BEIGE PP30W PP30O PP30BR PP30BL PP40W PP40O PP40BR PP40BL

Boxes PN40W PN50W PN50O PN50BR PN50BL PN65W PN65BR PN65BL

Size

Head Ø

(mm)

(mm)

Box Qty

25 25 25 30 30 30 30 40 40 40 40

6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4

250 250 250 250 250 250 250 250 250 250 250

Boxes White White Oak Mahogany Black White Mahogany Black

CLAD PINS

Product Code

Finish

Size

Shank Ø

Head Ø

(mm)

(mm)

(mm)

Box Qty

30

2.1

4

250

Mahogany White Beige White Oak Mahogany Black White Oak Mahogany Black

Boxes CP30

85


BRIGHT LOOSE NAILS

COLLATED & LOOSE NAILS

BRIGHT LOOSE NAILS Bright loose nails covering all aspects of internal uses. Available in a wide variety of packaging options to suit any job size.

ANNULAR RINGSHANK

PANEL PINS

Annular rings provide additional holding power, where additional grip is required.

A light weight nail, commonly used for cabinet making and light duty applications.

Product Code

Product Code

For additional strength

Length (mm)

Shank Dia. (mm)

For light duty applications

Qty

Packs BAR25P BAR50P BAR65P

25 50 65

2.00 2.65 3.35

150 50 30

20 25 30 40 50 65 75

2.00 2.00 2.36 2.36 2.65 3.35 3.75

500g 500g 500g 500g 500g 500g 500g

20 25 30 40 50 65 75

2.00 2.00 2.36 2.36 2.65 3.35 3.75

1kg 1kg 1kg 1kg 1kg 1kg 1kg

20 25 30 40 50 65 75

2.00 2.00 2.36 2.36 2.65 3.35 3.75

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

500g Bags BAR20MB BAR25MB BAR30MB BAR40MB BAR50MB BAR65MB BAR75MB

1kg Bags BAR20B BAR25B BAR30B BAR40B BAR50B BAR65B BAR75B

2.5kg Bags BAR20LB BAR25LB BAR30LB BAR40LB BAR50LB BAR65LB BAR75LB

2.5kg Tubs BAR20T BAR25T BAR30T BAR40T BAR50T BAR65T BAR75T

20 25 30 40 50 65 75

2.00 2.00 2.36 2.36 2.65 3.35 3.75

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

20 25 30 40 50 65 75

2.00 2.00 2.36 2.36 2.65 3.35 3.75

25kg 25kg 25kg 25kg 25kg 25kg 25kg

25kg Boxes BAR20 BAR25 BAR30 BAR40 BAR50 BAR65 BAR75

86

(mm)

Shank Dia. (mm)

Qty

25 30 40 50

1.60 1.60 1.60 1.60

250 200 100 50

25 30 40 50

1.60 1.60 1.60 1.60

500g 500g 500g 500g

25 30 40 50

1.60 1.60 1.60 1.60

1kg 1kg 1kg 1kg

25 30 40 50

1.60 1.60 1.60 1.60

2.5kg 2.5kg 2.5kg 2.5kg

25 30 40 50

1.60 1.60 1.60 1.60

2.5kg 2.5kg 2.5kg 2.5kg

25 30 40 50

1.60 1.60 1.60 1.60

25kg 25kg 25kg 25kg

Length

Packs PPB25P PPB30P PPB40P PPB50P

500g Bags BPP25MB BPP30MB BPP40MB BPP50MB

1kg Bags BPP25B BPP30B BPP40B BPP50B

2.5kg Bags BPP25LB BPP30LB BPP40LB BPP50LB

2.5kg Tubs BPP25T BPP30T BPP40T BPP50T

25kg Boxes BPP25 BPP30 BPP40 BPP50


BRIGHT LOOSE NAILS

COLLATED & LOOSE NAILS

ROUND WIRE

OVAL NAILS

General use with full round head for clamping.

Oval head for a concealed finish.

General purpose nail

Product Code

Where appearance is important

(mm)

Shank Dia. (mm)

Qty

40 50 65 75 100 125 150

2.65 2.65 3.35 3.75 4.50 5.60 6.00

500g 500g 500g 500g 500g 500g 500g

40 50 65 75 100 125 150

2.65 2.65 3.35 3.75 4.50 5.60 6.00

1kg 1kg 1kg 1kg 1kg 1kg 1kg

Length

500g Bags BRW40MB BRW50MB BRW65MB BRW75MB BRW100MB BRW125MB BRW150MB

1kg Bags BRW40B BRW50B BRW65B BRW75B BRW100B BRW125B BRW150B

2.5kg Bags BRW40LB BRW50LB BRW65LB BRW75LB BRW100LB BRW125LB BRW150LB

40 50 65 75 100 125 150

2.65 2.65 3.35 3.75 4.50 5.60 6.00

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

40 50 65 75 100 125 150

2.65 2.65 3.35 3.75 4.50 5.60 6.00

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

40 50 65 75 100

2.65 2.65 3.35 3.75 4.50

10kg 10kg 10kg 10kg 10kg

40 50 65 75 100 125 150

2.65 2.65 3.35 3.75 4.50 5.60 6.00

25kg 25kg 25kg 25kg 25kg 25kg 25kg

2.5kg Tubs BRW40T BRW50T BRW65T BRW75T BRW100T BRW125T BRW150T

10kg Tubs BRW40LT BRW50LT BRW65LT BRW75LT BRW100LT

25kg Boxes BRW40 BRW50 BRW65 BRW75 BRW100 BRW125 BRW150

Product Code

Length (mm)

Qty

500g Bags BON40MB BON50MB BON65MB BON75MB BON100MB

40 50 65 75 100

500g 500g 500g 500g 500g

40 50 65 75 100

1kg 1kg 1kg 1kg 1kg

40 50 65 75 100

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

40 50 65 75 100

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

40 50 65 75 100

25kg 25kg 25kg 25kg 25kg

1kg Bags BON40B BON50B BON65B BON75B BON100B

2.5kg Bags BON40LB BON50LB BON65LB BON75LB BON100LB

2.5kg Tubs BON40T BON50T BON65T BON75T BON100T

25kg Boxes BON40 BON50 BON65 BON75 BON100

87


BRIGHT LOOSE NAILS

COLLATED & LOOSE NAILS

ROUND LOST HEAD

CUT FLOORING BRADS

For second fix applications, where the head can be punched below the surface for a concealed finish.

A traditional nail used for fixing floor boards.

For a concealed finish

Perfect for floor boards

Product Code

Length (mm)

Qty

500g Bags CFB50MB CFB65MB

50 65

500g 500g

50 65

1kg 1kg

50 65

2.5kg 2.5kg

50 65

2.5kg 2.5kg

50 65

25kg 25kg

1kg Bags CFB50B CFB65B

2.5kg Bags CFB50LB CFB65LB

2.5kg Tubs CFB50T CFB65T

25kg Boxes CFB50 CFB65

CUT CLASP NAILS Product Code

(mm)

Shank Dia. (mm)

Qty

40 50 65

2.36 3.00 3.35

500g 500g 500g

40 50 65

2.36 3.00 3.35

1kg 1kg 1kg

40 50 65

2.36 3.00 3.35

2.5kg 2.5kg 2.5kg

Length

A traditional nail

500g Bags BLH40MB BLH50MB BLH65MB

1kg Bags BLH40B BLH50B BLH65B

2.5kg Bags BLH40LB BLH50LB BLH65LB

2.5kg Tubs BLH40T BLH50T BLH65T

40 50 65

2.36 3.00 3.35

2.5kg 2.5kg 2.5kg

25kg Boxes BLH40 BLH50 BLH65

40 50 65

2.36 3.00 3.35

25kg 25kg 25kg

Cut clasps nails provide a more traditional fixing into timber. Product Code

Length (mm)

Qty

500g Bags BCN50MB BCN65MB BCN75MB BCN100MB

50 65 75 100

500g 500g 500g 500g

50 65 75 100

1kg 1kg 1kg 1kg

50 65 75 100

2.5kg 2.5kg 2.5kg 2.5kg

50 65 75 100

2.5kg 2.5kg 2.5kg 2.5kg

50 65 75 100

25kg 25kg 25kg 25kg

1kg Bags BCN50B BCN65B BCN75B BCN100B

2.5kg Bags BCN50LB BCN65LB BCN75LB BCN100LB

2.5kg Tubs BCN50T BCN65T BCN75T BCN100T

25kg Boxes BCN50 BCN65 BCN75 BCN100

88


GALVANISED LOOSE NAILS

COLLATED & LOOSE NAILS

GALVANISED LOOSE NAILS Mechanically galvanised for external use covering a wide variety of applications. Available in a wide variety of packaging options to suit any job size.

SQUARE TWIST

ELH CLOUT

For use with joist hangers

Extra large head

For use with all types of builders metal work. Product Code

Length (mm)

Shank Dia. (mm)

Qty

Product Code

500g Bags GST30MB GST40MB

30 40

3.75 3.75

500g 500g

30 40

3.75 3.75

1kg 1kg

30 40

3.75 3.75

2.5kg 2.5kg

30 40

3.75 3.75

2.5kg 2.5kg

30

3.75

10kg

1kg Bags GST30B GST40B

2.5kg Bags GST30LB GST40LB

2.5kg Tubs GST30T GST40T

10kg Tubs GST30LT

25kg Boxes GST30 GST40

30 40

3.75 3.75

25kg 25kg

SLAB NAILS

For fixing insulation slabs to wood.

Product Code

(mm)

Shank Dia. (mm)

Qty

100 125 150 180 200

82 71 60 38 36

500g 500g 500g 500g 500g

100 125 150 180 200

82 71 60 38 36

1kg 1kg 1kg 1kg 1kg

100 125 150 180 200

82 71 60 38 36

10kg 10kg 10kg 10kg 10kg

Length

500g Bags SLN100MB SLN125MB SLN150MB SLN180MB SLN200MB

1kg Bags SLN100B SLN125B SLN150B SLN180B SLN200B

10kg Boxes SLN100 SLN125 SLN150 SLN180 SLN200

Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard. (mm)

Shank Dia. (mm)

Qty

30 40 50

3.00 3.00 3.00

100 75 50

13 20 25 30 40 50

3.00 3.00 3.00 3.00 3.00 3.00

500g 500g 500g 500g 500g 500g

13 20 25 30 40 50

3.00 3.00 3.00 3.00 3.00 3.00

1kg 1kg 1kg 1kg 1kg 1kg

13 20 25 30 40 50

3.00 3.00 3.00 3.00 3.00 3.00

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

13 20 25 30 40 50

3.00 3.00 3.00 3.00 3.00 3.00

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

13 20

3.00 3.00

10kg 10kg

13 20 25 30 40 50

3.00 3.00 3.00 3.00 3.00 3.00

25kg 25kg 25kg 25kg 25kg 25kg

Length

Packs GEC30P GEC40P GEC50P

500g Bags GEC13MB GEC20MB GEC25MB GEC30MB GEC40MB GEC50MB

1kg Bags GEC13B GEC20B GEC25B GEC30B GEC40B GEC50B

2.5kg Bags GEC13LB GEC20LB GEC25LB GEC30LB GEC40LB GEC50LB

2.5kg Tubs GEC13T GEC20T GEC25T GEC30T GEC40T GEC50T

10kg Tubs GEC13LT GEC20LT

25kg Boxes GEC13 GEC20 GEC25 GEC30 GEC40 GEC50

89


GALVANISED LOOSE NAILS

COLLATED & LOOSE NAILS

CLOUT

ROUND WIRE

Perfect for roofing applications.

General use with full round head for clamping.

General purpose nail

Product Code

Packs

GCN30P GCN40P GCN50P GCN75P

500g Bags

GCN25MB GCN30MB GCN40MB GCN33540MB GCN50MB GCN33550MB GCN26565MB GCN65MB GCN75MB

1kg Bags

GCN25B GCN30B GCN40B GCN33540B GCN50B GCN33550B GCN26565B GCN65B GCN75B

2.5kg Bags

GCN25LB GCN30LB GCN40LB GCN33540LB GCN50LB GCN33550LB GCN26565LB GCN65LB GCN75LB

2.5kg Tubs

GCN25T GCN30T GCN40T GCN33540T GCN50T GCN33550T GCN26565T GCN65T GCN75T

10kg Tubs

GCN30LT GCN40LT

25kg Boxes

GCN25 GCN30 GCN40 GCN33540 GCN50 GCN33550 GCN26565 GCN65 GCN75

90

General purpose nail

(mm)

Shank Dia. (mm)

Qty

30 40 50 75

2.65 2.65 2.65 3.75

125 100 50 25

25 30 40 40 50 50 65 65 75

2.65 2.65 2.65 3.35 2.65 3.35 2.65 3.75 3.75

500g 500g 500g 500g 500g 500g 500g 500g 500g

25 30 40 40 50 50 65 65 75

2.65 2.65 2.65 3.35 2.65 3.35 2.65 3.75 3.75

1kg 1kg 1kg 1kg 1kg 1kg 1kg 1kg 1kg

25 30 40 40 50 50 65 65 75

2.65 2.65 2.65 3.35 2.65 3.35 2.65 3.75 3.75

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

25 30 40 40 50 50 65 65 75

2.65 2.65 2.65 3.35 2.65 3.35 2.65 3.75 3.75

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

30 40

2.65 2.65

10kg 10kg

25 30 40 40 50 50 65 65 75

2.65 2.65 2.65 3.35 2.65 3.35 2.65 3.75 3.75

25kg 25kg 25kg 25kg 25kg 25kg 25kg 25kg 25kg

Length

Product Code

Packs

GRW40P GRW50P GRW65P GRW75P GRW100P GRW125P GRW150P

500g Bags

GRW40MB GRW50MB GRW26565MB GRW65MB GRW75MB GRW100MB GRW125MB GRW150MB

1kg Bags

GRW40B GRW50B GRW26565B GRW65B GRW75B GRW100B GRW125B GRW150B

2.5kg Bags

GRW40LB GRW50LB GRW26565LB GRW65LB GRW75LB GRW100LB GRW125LB GRW150LB

2.5kg Tubs

GRW40T GRW50T GRW26565T GRW65T GRW75T GRW100T GRW125T GRW150T

10kg Tubs

GRW40LT GRW50LT GRW26565LT GRW65LT GRW75LT GRW100LT

25kg Boxes

GRW40 GRW50 GRW26565 GRW65 GRW75 GRW100 GRW125 GRW150

(mm)

Shank Dia. (mm)

Qty

40 50 65 75 100 125 150

2.65 2.65 3.35 3.75 4.50 5.60 6.00

75 50 40 25 15 10 8

40 50 65 65 75 100 125 150

2.65 2.65 2.65 3.35 3.75 4.50 5.60 6.00

500g 500g 500g 500g 500g 500g 500g 500g

40 50 65 65 75 100 125 150

2.65 2.65 2.65 3.35 3.75 4.50 5.60 6.00

1kg 1kg 1kg 1kg 1kg 1kg 1kg 1kg

40 50 65 65 75 100 125 150

2.65 2.65 2.65 3.35 3.75 4.50 5.60 6.00

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

40 50 65 65 75 100 125 150

2.65 2.65 2.65 3.35 3.75 4.50 5.60 6.00

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

40 50 65 65 75 100

2.65 2.65 2.65 3.35 3.75 4.50

10kg 10kg 10kg 10kg 10kg 10kg

40 50 65 65 75 100 125 150

2.65 2.65 2.65 3.35 3.75 4.50 5.60 6.00

25kg 25kg 25kg 25kg 25kg 25kg 25kg 25kg

Length


GALVANISED LOOSE NAILS JAGGED PLASTERBOARD For fixing plasterboard

Product Code

500g Bags

JPN30MB JPN40MB

1kg Bags

JPN30B JPN40B

2.5kg Bags

JPN30LB JPN40LB

2.5kg Tubs

JPN30T JPN40T

25kg Boxes

JPN30 JPN40

Length (mm)

Traditional alternative to the drywall screw.

Shank Dia. (mm)

Qty

30 40

2.65 2.65

500g 500g

30 40

2.65 2.65

1kg 1kg

30 40

2.65 2.65

2.5kg 2.5kg

30 40

2.65 2.65

2.5kg 2.5kg

30 40

2.65 2.65

25kg 25kg

COLLATED & LOOSE NAILS

PRESSER POINT STAPLES For fencing applications

Used for fixing fencing and wire mesh. Product Code

Packs

PPS20P PPS25P PPS30P PPS40P

500g Bags

PPS20MB PPS25MB PPS30MB PPS40MB PPS50MB

1kg Bags

PPS20B PPS25B PPS30B PPS40B PPS50B

2.5kg Bags

DRIVE SCREW

For roofing applications

Fixing roofing and cladding sheets to timber purlins.

PPS20LB PPS25LB PPS30LB PPS40LB PPS50LB

2.5kg Tubs

Product Code

500g Bags

DSN50MB DSN65MB DSN75MB DSN100MB DSN125MB DSN150MB

1kg Bags

DSN50B DSN65B DSN75B DSN100B DSN125B DSN150B

2.5kg Bags

DSN50LB DSN65LB DSN75LB DSN100LB DSN125LB DSN150LB

2.5kg Tubs

DSN50T DSN65T DSN75T DSN100T DSN125T DSN150T

25kg Boxes

DSN50 DSN65 DSN75 DSN100 DSN125 DSN150

(mm)

Shank Dia. (mm)

Qty

50 65 75 100 125 150

5.40 5.40 5.40 5.40 6.40 6.40

500g 500g 500g 500g 500g 500g

50 65 75 100 125 150

5.40 5.40 5.40 5.40 6.40 6.40

1kg 1kg 1kg 1kg 1kg 1kg

50 65 75 100 125 150

5.40 5.40 5.40 5.40 6.40 6.40

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

50 65 75 100 125 150

5.40 5.40 5.40 5.40 6.40 6.40

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

50 65 75 100 125 150

5.40 5.40 5.40 5.40 6.40 6.40

25kg 25kg 25kg 25kg 25kg 25kg

Length

PPS20T PPS25T PPS30T PPS40T PPS50T

25kg Boxes

PPS20 PPS25 PPS30 PPS40 PPS50

(mm)

Shank Dia. (mm)

Qty

20 25 30 40

2.00 2.65 3.35 4.00

75 60 30 20

20 25 30 40 50

2.00 2.65 3.35 4.00 4.00

500g 500g 500g 500g 500g

20 25 30 40 50

2.00 2.65 3.35 4.00 4.00

1kg 1kg 1kg 1kg 1kg

20 25 30 40 50

2.00 2.65 3.35 4.00 4.00

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

20 25 30 40 50

2.00 2.65 3.35 4.00 4.00

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

20 25 30 40 50

2.00 2.65 3.35 4.00 4.00

25kg 25kg 25kg 25kg 25kg

Length

SPRING HEAD

For fixing corrugated sheeting

Twisted shank gives a very strong purchase. Product Code

500g Bags

GSN65MB

1kg Bags

GSN65B

2.5kg Bags

GSN65LB

2.5kg Tubs

GSN65T

10kg Boxes

GSN65

(mm)

Shank Dia. (mm)

Qty

65

3.35

500g

65

3.35

1kg

65

3.35

2.5kg

65

3.35

2.5kg

65

3.35

10kg

Length

91


SHERARDISED LOOSE NAILS

COLLATED & LOOSE NAILS

SHERARDISED NAILS For medium duty rust protection. Available in a wide variety of packaging options to suit any job size.

ANNULAR RINGSHANK

PANEL PINS

For additional strength

For light duty applications

Annular rings provide additional holding power, where additional grip is required.

A light weight nail, commonly used for cabinet making and light duty applications.

Product Code

Product Code

Length (mm)

Shank Dia. (mm)

Qty

500g Bags

500g Bags SAR40MB SAR50MB SAR65MB SAR75MB SAR100MB

40 50 65 75 100

2.65 2.65 3.35 3.75 5.0

500g 500g 500g 500g 500g

40 50 65 75 100

2.65 2.65 3.35 3.75 5.0

1kg 1kg 1kg 1kg 1kg

40 50 65 75 100

2.65 2.65 3.35 3.75 5.0

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

40 50 65 75 100

2.65 2.65 3.35 3.75 5.0

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

1kg Bags SAR40B SAR50B SAR65B SAR75B SAR100B

2.5kg Bags SAR40LB SAR50LB SAR65LB SAR75LB SAR100LB

2.5kg Tubs SAR40T SAR50T SAR65T SAR75T SAR100T

25kg Boxes SAR40 SAR50 SAR65 SAR75 SAR100

40 50 65 75 100

2.65 2.65 3.35 3.75 5.0

25kg 25kg 25kg 25kg 25kg

SPP25MB SPP30MB SPP40MB SPP50MB

1kg Bags

SPP25B SPP30B SPP40B SPP50B

25kg Boxes

SPP25 SPP30 SPP40 SPP50

Shank Dia. (mm)

Qty

25 30 40 50

1.60 1.60 1.60 2.00

500g 500g 500g 500g

25 30 40 50

1.60 1.60 1.60 2.00

1kg 1kg 1kg 1kg

25 30 40 50

1.60 1.60 1.60 2.00

25kg 25kg 25kg 25kg

SQUARE TWIST For use with joist hangers

For use with all types of builders metal work. Product Code

500g Bags

SST30MB SST40MB

1kg Bags

SST30B SST40B

2.5kg Bags

SST30LB SST40LB

2.5kg Tubs

SST30T SST40T

10kg Tubs

SST30LT SST40LT

25kg Boxes

SST30 SST40

92

(mm)

Length

(mm)

Shank Dia. (mm)

Qty

30 40

3.75 3.75

500g 500g

30 40

3.75 3.75

1kg 1kg

30 40

3.75 3.75

2.5kg 2.5kg

30 40

3.75 3.75

2.5kg 2.5kg

30 40

3.75 3.75

10kg 10kg

30 40

3.75 3.75

25kg 25kg

Length


ALUMINIUM & COPPER LOOSE NAILS

COLLATED & LOOSE NAILS

ALUMINIUM NAILS

COPPER NAILS

Manufactured using high quality aluminium. These nails are ideal for all types of roofing work including slate. Providing high levels of rust protection.

Manufactured using high quality copper. These nails and straps are ideal for all types of roofing work including slate. Providing high levels of rust protection.

CLOUT

CLOUT

Large diameter head, commonly used for tile hanging.

Large diameter head, perfect for attaching roofing felt, slate and shingles

Product Code

Product Code

For roofing applications

For roofing applications

(mm)

Shank Dia. (mm)

Qty

30 40 50 65

2.65 3.35 3.35 3.35

250g 250g 250g 250g

30 40 50 65

2.65 3.35 3.35 3.35

1kg 1kg 1kg 1kg

30 40 50 65

2.65 3.35 3.35 3.35

1kg 1kg 1kg 1kg

30 40 50 65

2.65 3.35 3.35 3.35

10kg 10kg 10kg 10kg

Length

250g Bags ACN30B ACN40B ACN50B ACN65B

1kg Tubs ACN30T ACN40T ACN50T ACN65T

10kg Boxes ACN30 ACN40 ACN50 ACN65

Shank Dia. (mm)

Qty

25 25 30 30 38 38 50

2.65 3.35 2.65 3.35 2.65 3.35 3.35

500g 500g 500g 500g 500g 500g 500g

25 25 30 30 38 38 50

2.65 3.35 2.65 3.35 2.65 3.35 3.35

1kg 1kg 1kg 1kg 1kg 1kg 1kg

25 25 30 30 38 38 50

2.65 3.35 2.65 3.35 2.65 3.35 3.35

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

25 25 30 30 38 38 50

2.65 3.35 2.65 3.35 2.65 3.35 3.35

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

500g Bags

1kg Bags ACN30LB ACN40LB ACN50LB ACN65LB

(mm)

Length

COP225MB COP325MB COP230MB COP330MB COP238MB COP338MB COP350MB

1kg Bags COP225B COP325B COP230B COP330B COP238B COP338B COP350B

2.5kg Bags COP225LB COP325LB COP230LB COP330LB COP238LB COP338LB COP350LB

2.5kg Tubs COP225T COP325T COP230T COP330T COP238T COP338T COP350T

93


MASONRY LOOSE NAILS

COLLATED & LOOSE NAILS

COPPER DISC RIVETS

COPPER STRAPS

Large diameter head, perfect for attaching fibre cement slates

Used to prevent slate and shingles from slipping.

Product Code

Product Code

For use with copper clouts for fixing slate

For fixing fibre cement slates

(mm)

Shank Dia. (mm)

Qty

20

1.50

250

20

1.50

1,000

Length

(mm)

Width (mm)

Qty

150 150

13 13

10 100

Length

Bags

Bags CDRB

Tubs CDRT

MASONRY NAILS Available in:

Zinc (CR3)

CSS150P CSS150B

ROUND HEAD

For fixing timber to masonry

For heavy duty applications with a round head for additional clamping.

FLAT HEAD

Product Code

For fixing timber to masonry

(mm)

Shank Dia. (mm)

Qty

75

3.5

50

65 75 85 100

3.5 3.5 3.5 3.5

100 100 100 100

(mm)

Shank Dia. (mm)

Qty

25 30 35 40 50 60 75

3.7 3.7 3.7 3.7 3.7 3.7 3.7

100 100 100 100 100 100 50

Length

Packs HM35075P

For light to medium duty applications with a countersunk head for a concealed finish. Product Code

(mm)

Shank Dia. (mm)

Qty

25 30 35 40 50 60 65

2.5 2.5 2.5 2.5 2.5 3.0 3.0

50 50 50 50 50 50 50

25 30 35 40 50 40 50 60 65

2.5 2.5 2.5 2.5 2.5 3.0 3.0 3.0 3.0

100 100 100 100 100 100 100 100 100

Length

Boxes HM35065 HM35075 HM35085 HM350100

Packs HM25025P HM25030P HM25035P HM25040P HM25050P HM30060P HM30065P

Boxes HM25025 HM25030 HM25035 HM25040 HM25050 HM30040 HM30050 HM30060 HM30065

94

WASHERED

For increased clamping

Product Code

Length

Boxes WMN25 WMN30 WMN35 WMN40 WMN50 WMN60 WMN75


STAINLESS STEEL NAILS

COLLATED & LOOSE NAILS

STAINLESS STEEL NAILS Provides high levels of rust protection.

ANNULAR RINGSHANK

ROUND WIRE

For additional strength

General purpose nail

Annular rings provide additional holding power, where additional grip is required.

General use with full round head for clamping.

Product Code

Product Code

(mm)

Shank Dia. (mm)

Qty

40 50 65 75 100

2.65 2.65 3.35 3.75 4.5

546 442 216 150 79

40 50 65 75 100

2.65 2.65 3.35 3.75 4.5

546 442 216 150 79

Length

Shank Dia. (mm)

Qty

75 100

3.75 4

150 100

75 100

3.75 4

150 100

1kg Bags

1kg Bags SSAR40B SSAR50B SSAR65B SSAR75B SSAR100B

(mm)

Length

SSRW75B SSWR100B

10kg Boxes SSRW75 SSRW100

10kg Boxes SSAR40 SSAR50 SSAR65 SSAR75 SSAR100

ROUND LOST HEAD For a concealed finish

The head can be punched below the surface for a concealed finish. Product Code

(mm)

Shank Dia. (mm)

Qty

50 65

2.65 3.35

443 216

50 65

2.65 3.35

443 216

Length

1kg Bags SSLH50B SSLH65B

10kg Boxes SSLH50 SSLH65B

95


BUILDERS METAL WORK 97 - MASONRY HANGERS 98 - MF HANGERS 99 - TIMBER HANGERS 100 - RESTRAINT STRAPS 102 - ANGLED BRACKETS 102 - TRUSS CLIPS 103 - FRAMING ANCHORS

103 - NAIL PLATES 104 - REINFORCEMENT COIL 104 - FRAME CRAMPS 104 - FIXING BANDS 105 - WINDOW BOARD TIES 105 - WALL TIES 105 - INSULATION CLIPS

106 - WALL STARTER KITS 106 - ARRIS RAIL BRACKETS 106 - FENCE CLIPS 107 - CONNECTORS & BRACES 102 - SHIMS & PACKERS


MASONRY HANGERS

BUILDERS METAL WORK

MASONRY HANGERS

For masonry to timber applications Available in:

Galv.

A2/Aust. SS

To BS

EN ISO

14592:2

008

Supports timber joists from a brick or block wall. Install by either building into the wall or for renovation work rake out existing brickwork. Manufactured from pre-galvansied steel to give high level of corrosion resistance. For ultimate corrosion resistance use stainless steel

SINGLE PIECE -

Galv.

Product Code

Hangers 140mm and above are manufactured 10mm less than the joist to allow for notching and regularised timber.

B

Galv.

H (mm)

47100MH 47125MH 47147MH 47175MH 47200MH 47225MH

47 47 47 47 47 47

100 125 150 17 5 200 225

Product Code

W (mm)

H (mm)

B Joist Size (mm) W x H (mm)

Singles

H

WELDED -

W (mm)

80 80 80 75 75 75

47 x 100 47 x 125 47 x 150 47 x 175 47 x 200 47 x 225

W

A2/Aust. SS

Hangers 140mm and above are manufactured 10mm less than the joist to allow for notching and regularised timber.

B Joist Size (mm) W x H (mm)

Singles (Galvanised Steel)

H

B

W

75150WMH 75175WMH 75200WMH 75225WMH 90150WMH 90175WMH 90200WMH 90225WMH 100150WMH 100175WMH 100200WMH 100225WMH 150200WMH 150225WMH

75 75 75 75 90 90 90 90 100 100 100 100 150 150

140 165 190 215 140 165 190 215 140 165 190 215 190 215

80 80 80 80 80 80 80 80 75 75 75 75 90 90

75 x 150 75 x 175 75 x 200 75 x 225 90 x 150 90 x 175 90 x 200 90 x 225 100 x 150 100 x 175 100 x 200 100 x 225 150 x 200 150 x 225

80 80 80 80 80 80 80 80 80

47 x 100 47 x 140 47 x 165 47 x 190 47 x 215 100 x 140 100 x 165 100 x 190 100 x 215

Singles (Stainless Steel) 47100WMHS 47150WMHS 47175WMHS 47200WMHS 47225WMHS 100150WMHS 100175WMHS 100200WMHS 100225WMHS

47 47 47 47 47 100 100 100 100

100 140 165 190 215 140 165 190 215

97


MULTI-FUNCTIONAL / TIMBER HANGERS

BUILDERS METAL WORK

MULTI-FUNCTIONAL HANGERS For timber to timber applications Available in:

Galv.

For medium to heavy duty timber to timber applications. Designed for use with different fixings to give greater flexibility and improved performance. Overall length refers to the length of the hanger when flat.

MULTI-FUNCTIONAL HANGERS Location tabs aid fast accurate alignment of the hanger.

Product Code

W (mm)

H (mm)

B (mm)

Overall Length (mm)

47 47 47 47 76 76 76 90 100 100 100 150 150

97 150 179 229 165 164 214 207 123 152 202 127 177

85 85 85 85 85 85 85 85 85 85 85 85 85

240 346 404 504 346 404 504 504 346 404 504 404 504

Singles 47240MMFH 47346MFH 47404MFH 47504MFH 76346MFH 76404MFH 76504MFH 90504MFH 100346MFH 100404MFH 100504MFH 150404MFH 150504MFH

H

B W

MINI TIMBER HANGERS For timber to timber applications Available in:

Galv.

A2/Aust. SS

Timber to timber joist hangers, suitable for light duty applications such as ceiling joists, decking and trimmers.

MINI TIMBER HANGER Tag on base of the hanger helps avoid rotation and aids fast, accurate location. The tag can easily be bent if not required.

Product Code

W

H

(mm)

(mm)

B (mm)

Joist Size W x H (mm)

Singles (Galvanised Steel) H

44THM 47THM

44 47

68 67

50 50

44 x 75-100 47 x 75-100

50 50

44 x 100 to 150 47 x 100 to 150

Singles (Stainless Steel) B W

98

44THMS 47THMS

44 47

97 96


TIMBER HANGERS

BUILDERS METAL WORK

TIMBER HANGERS

For timber to timber applications Available in:

Galv.

A2/Aust. SS

For various timber to timber connections such as roof trusses, rafters and joists. Manufactured from Pre-Galvanised steel to give a high level of corrosion resistance. For ultimate corrosion resistance use stainless steel.

STANDARD -

Galv.

A2/Aust. SS

Product Code

Increased leg lengths, all widths can take up to a 225mm deep joist.

125TH 150TH

B

B (mm)

Joist Size (mm)

125 150

300 300

50 50

125 x 100 to 225 150 x 100 to 225

Singles (Stainless Steel) 47THS 76THS 100THS

47 76 100

275 300 300

50 50 50

47 x 100 to 225 76 x 100 to 225 100 x 100 to 225

Product Code

W

L (mm)

B (mm)

Joist Size

(mm)

44 47 63 75 90 100

306 305 297 291 283 278

60 60 60 60 60 60

44 x 125 to 220 47 x 125 to 220 63 x 125 to 220 75 x 125 to 220 90 x 125 to 220 100 x 125 to 220

W

Galv.

Superior design allows the use of fewer nails for faster installation. Increased leg lengths, all widths can take up to 225mm deep joist.

(mm)

Singles

L

B

LONG LEG -

L (mm)

Singles (Galvanised Steel)

L

NO TAG -

W (mm)

44TH 47TH 63TH 75TH 90TH 100TH

W

Galv.

Increased leg lengths, all widths can take up to a 225mm deep joist. Perfect for loft conversions where the hanger extends below the support.

Product Code

W

L (mm)

B (mm)

Joist Size

(mm)

44 47 76 90 100 125 150

453 445 435 425 420 450 450

50 50 50 50 50 50 50

44 x 150 to 250 47 x 150 to 250 76 x 175 to 250 90 x 150 to 250 100 x 150 to 250 125 x 175 to 250 150 x 175 to 250

(mm)

Singles L

B

44450LTH 47450LTH 76450LTH 90450LTH 100450LTH 125450LTH 150450LTH

W

99


HEAVY RESTRAINT STRAPS

BUILDERS METAL WORK

HEAVY RESTRAINT STRAPS Joins joists & rafters to masonry Available in:

Galv.

A2/Aust. SS

To BS

EN ISO

14592:2

008

Generally used for horizontal restraint such as roof trusses, rafters and joists tied to masonry. Manufactured from Galvanised steel. For ultimate corrosion resistance use stainless steel.

BENT HEAVY DUTY -

Galv.

A2/Aust. SS

Usually used as a lateral restraint.

Product Code

Length (mm)

Bend Overall Thickness (mm) Length (mm) (mm)

Singles (Galvanised Steel) 600BRSH 800BRSH 1000BRSH 1200BRSH 1500BRSH 1600BRSH

500 700 900 1100 1400 1450

100 100 100 100 100 100

600 800 1,000 1,200 1,500 1,600

4.0 4.0 4.0 4.0 4.0 4.0

1,000 1,200

4.0 4.0

Singles (Stainless Steel) 1000BRSHS 900 1200BRSHS 1100

FLAT HEAVY DUTY -

Galv.

Product Code

Usually used as a lateral restraint.

Length (mm)

100 100

Bend Overall Thickness (mm) Length (mm) (mm)

Singles 1000FRSH

TWISTED HEAVY DUTY Usually used as a lateral restraint.

Galv.

Product Code

-

-

Length

Twist

(mm)

(mm)

500 900

100 100

1000

4.0

Overall Thickness Length (mm) (mm)

Singles 600TRSH 1000TRSH

100

600 1,000

4.0 4.0


LIGHT RESTRAINT STRAPS

BUILDERS METAL WORK

LIGHT RESTRAINT STRAPS Joins joists & rafters to masonry Available in:

Galv.

A2/Aust. SS To BS

EN ISO

14592:2

008

Light duty straps are generally for vertical applications such as holding down wallplates. (When used as a vertical restraint to hold down a wallplate, use a minimum length of 900mm) Available in galvanised steel, for ultimate corrosion resistance use stainless steel.

BENT LIGHT DUTY -

Galv.

A2/Aust. SS

Increased leg lengths, all widths can take up to a 225mm deep joist.

Product Code

Length

Bend

(mm)

(mm)

Overall Thickness Length (mm) (mm)

Singles (Galvanised Steel) 300BRSL 600BRSL 800BRSL 1000BRSL 1200BRSL

200 500 700 900 1100

100 100 100 100 100

300 600 800 1000 1200

2.4 2.4 2.4 2.4 2.4

1000

2.4

Singles (Stainless Steel) 1000BRSLS

FLAT LIGHT DUTY -

Galv.

A2/Aust. SS

Increased leg lengths, all widths can take up to a 225mm deep joist.

Product Code

800

100

Length

Bend

(mm)

(mm)

Overall Thickness Length (mm) (mm)

Singles (Galvanised Steel) 1000FRSL

-

-

1000

2.4

1000

2.4

Singles (Stainless Steel) 1000FRSLS

TWISTED LIGHT DUTY -

Galv.

Increased leg lengths, all widths can take up to a 225mm deep joist.

Product Code

-

-

Length

Twist

(mm)

(mm)

900

100

Overall Thickness Length (mm) (mm)

Singles 1000TRSL

1000

2.4

101


BUILDERS METAL WORK

ANGLED BRACKETS & TRUSS CLIPS

ANGLE BRACKETS

Fixes joists & rafters together Available in:

Galv.

A2/Aust. SS

A versatile and general purpose 90â ° bracket used to strengthen timber joints. Available in galvanised steel, for ultimate corrosion resistance use stainless steel.

Heavy duty brackets with strengthening ribs on bend to give added rigidity

Product Code

Width

Leg

Thickness

(mm)

(mm)

(mm)

Singles (Galvanised Steel) 5050AB 6040AB 9090AB 15090AB 150150AB

62 62 62 62 62

50 x 50 60 x 40 90 x 90 150 x 90 150 x 150

2.4 2.4 2.4 2.4 2.4

Singles (Stainless Steel) 6040ABS 9090ABS

62 62

60 x 40 90 x 90

2.4 2.4

TRUSS CLIPS

For fixing joists, girders & rafters Available in:

Galv.

For fixing trusses, girders and rafters to wallplate. Can also be used for general applications as a multi-purpose connector to provide restraint whenever two timber members cross.

Installation prongs help aid location of the joist and rafters easier.

102

Product Code

Width

Thickness

Height

(mm)

(mm)

(mm)

47

1.0

150

Singles 47TC


UNIVERSAL FRAMING ANCHOR & PLATES

BUILDERS METAL WORK

UNIVERSAL FRAMING ANCHOR

For timber to timber applications Available in:

Galv.

An economical method of providing a strong joint for the construction of timber frames. The unique bending slot allows instant and accurate on-site bending for all 2 and 3 way ties. The reversible design is ideal for a variety of connections. Product Code

Width

Height

(mm)

(mm)

40 x 40

124

Singles UFA

NAIL PLATES

For timber to timber applications Available in:

Galv.

A2/Aust. SS To BS

EN ISO

14592:2

008

A versatile perforated plate used for connecting or repairing timber.

Strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish.

Product Code

Width

Thickness

Length

(mm)

(mm)

(mm)

Singles (Galvanised Steel) 42NP 85NP 104NP 169NP 178NP

42 85 104 169 178

1.0 1.0 1.0 1.0 1.0

178 178 154 178 338

1.0

178

Singles (Stainless Steel) 85NPS

85

103


COILS, BANDS & CRAMPS

BUILDERS METAL WORK

BRICK REINFORCEMENT COIL - Perfect for preventing cracking. Available in:

Galv.

FIXING BANDS

Perfect for suspending pipework Available in:

A2/Aust. SS

Produced for brick and block work reinforcement. Its primary usage is to prevent cracking. For ultimate corrosion resistance use stainless steel.

Product Code

Length (m)

Product Code

20 20 20

1210FB 1810FB 2010FB 2510FB

Singles (Galvanised Steel)

Width

Length

(mm)

(m)

Singles (Galvanised Steel)

65 100 175

Singles (Stainless Steel) 63BRCSS 100BRCSS

A2/Aust. SS

Multiple hole sizes to add to its versatility. Four different hole sizes ( 3.75 round, M10 round, M6 and M8 Square)

Width (mm)

63BRCG 100BRCG 175BRCG

Galv.

65 100

12 18 20 25

10 10 10 10

Singles (Stainless Steel)

20 20

2010FBS

20

10

CRAMPS

For fixing frames to masonry Available in:

Galv.

A2/Aust. SS

To BS

EN ISO

14592:2

008

Traditionally used for securing timber windows and door frames into masonry. They can also be used for restraining masonry to new and existing structures in non structural applications.

SAFETY FRAME CRAMPS -

A2/Aust. SS

Two 6mm holes and one 8mm hole. In stainless steel for maximum corrosion resistance.

Product Code

(mm)

Projection length (mm)

19 19 19

100 150 200

W

104

Galv.

Two 6mm holes and one 8mm hole. Galvanised after manufacture.

(mm)

(mm)

Product Code

50 50 50

2.0 2.0 2.0

100FFC 150FFC 200FFC

Bend Thickness

Singles 100SFCS 150SFCS 200SFCS

FISHTAILED CRAMPS -

(mm)

Projection length (mm)

25 25 25

100 150 200

W

Bend Thickness (mm)

(mm)

50 50 50

2.3 2.3 2.3

Singles


TIES & RETAINING CLIPS

WINDOW BOARD TIES

SCREW-IN FRAME TIE

Masonry to window board Available in:

BUILDERS METAL WORK

Masonry to wooden frames

Galv.

Light duty way to tie frames to masonry.

A simple solution to tie window boards to masonry.

Product Code

Width

Length

(mm)

(mm)

Product Code

12

147

175SFT

Singles WBT

Thread Dia x L

Projection Length

(mm)

(mm)

6 x 30

175

Singles

WALL TIES

For timber to timber applications To BS

Available in:

A2/Aust. SS

EN ISO

14592:2

LIGHT DUTY TYPE 4 WALL TIES Tangle free design, perfect for masonry cavity walls in box form for domestic dwellings of up to two storeys or a maximum 10m in height.

GENERAL DUTY TYPE 2 WALL TIES Tangle free design, perfect for masonry cavity walls in domestic houses and small commercial buildings of up to three storeys and maximum 15m in height.

008

Product Code

Cavity Max Length x Qty Gauge (mm) Width (mm) Height (m)

Bundles 200WT4 225WT4 250WT4 275WT4

Product Code

200 x 2.3 225 x 2.3 250 x 2.3 275 x 2.3

50 to 75 76 to 100 101 to 125 up to 150

10 10 10 10

250 250 250 250

Cavity Max Length x Qty Gauge (mm) Width (mm) Height (m)

Bundles 225WT2 250WT2 275WT2

225 x 3 250 x 3 275 x 3

76 to 100 101 to 125 up to 150

15 15 15

250 250 250

INSULATION RETAINING CLIPS Used with a cavity wall tie to hold insulation material against the inner wall of the cavity.

Product Code

Width

Diameter

(mm)

(mm)

Universal

80

Qty

Bags IC

250

105


WALL STARTER KITS & ARRIS BRACKETS

BUILDERS METAL WORK

WALL STARTER KITS

Joins new walls to existing masonry Available in:

430 Ferritic Stainless Steel

A stainless steel system, designed to join new walls to existing masonry, suitable for both internal and external brick or block walls.

Product Code

Kit includes, x2 wall rails, x5 plugs / coach screws / washers x10 wall rail connectors

Width

Length

(mm)

(mm)

Kit Length (2 x Profiles) (mm)

41

1200

2400

Width

Length

Thickness

(mm)

(mm)

(mm)

62 x 62

300

0.7

Singles WSS

ARRIS RAIL BRACKETS For fixing fences to timber posts Available in:

Galv.

Ideal for installing and repairing fences with timber posts.

Product Code

Singles 300ARS

FENCING CLIPS Available in:

Galv.

A quick and easy way to secure fence panels and trellis to timber posts or plugged and screwed into masonry.

Product Code

Width (mm)

Singles FC44 FC51

44 51

FENCE KIT

For fence repair and general maintenance Available in:

Zinc (CR3)

Collection of fixtures suitable for fence repair and general maintenance. Contents: 2 x Square Plate Washers 2 x Carriage Bolt & Hex Nut 2 x Corner Brace (38mm)

106

Product Code

Carriage Bolt & Nut (mm)

Square Plate Washer (mm)

Corner Braces (mm)

10 x 120

M10 x 50 x 50

38

Singles FKITP


CONNECTORS & BRACES

BUILDERS METAL WORK

CONNECTORS & BRACES

For joining and strengthening applications Available in: Zinc (CR3)

Galv.

Brass

Very versatile and multi-use products, they are commonly used in kitchen fitting, furniture repairs, carpentry and joinery. These plates may also be used in many other applications where joining or strengthening is required.

DRYWALL BRACKETS -

WORKTOP CONNECTOR -

Zinc (CR3)

Provides a concealed and strong joint for worktops eliminating the need for surface mounted joining strips. Frequently used in pairs. Brackets require 35mm holes.

Designed especially for connecting plasterboard dry lining systems to masonry walls, concrete soffit and timber joists.

Product Code

Size (mm) WxLxA

Qty

195 295

100 100

Product Code

Boxes DB195 DB295

Zinc (CR3)

Size (mm) WxLxA

Qty

M6 x 150

6

Bag

STRETCHER PLATES -

WC6150

Zinc (CR3) Product Code

Perfect for strengthening draws and kitchen fitting.

Size (mm) LxWxH

Thickness (mm)

Qty

38 x 25 x 29

1.8

100

38SPLP

38 x 25 x 29

1.8

4

Product Code

Size (mm) HxLxW

Thickness (mm)

Qty

25 x 25 x 16 38 x 38 x 16 50 x 50 x 16 65 x 65 x 16 75 x 75 x 16 100 x 100 x 22

1.6 1.6 1.6 1.7 1.7 2.3

50 50 50 50 50 25

25 x 25 x 16 38 x 38 x 16 50 x 50 x 16 65 x 65 x 16 75 x 75 x 16 100 x 100 x 22

1.6 1.6 1.6 1.7 1.7 2.3

4 4 4 4 4 2

Boxes

H

38SPL

Packs L

CORNER BRACES -

W

Zinc (CR3)

Perfect for strengthening draws and kitchen fitting. Countersunk holes for a flush finish.

Boxes H

25CBR 38CBR 50CBR 65CBR 75CBR 100CBR

Packs

L W

25CBRP 38CBRP 50CBRP 65CBRP 75CBRP 100CBRP

107


CONNECTORS & BRACES

BUILDERS METAL WORK

ANGLE BRACES -

TEE PLATES -

Zinc (CR3)

Size (mm) HxLxW

Thickness (mm)

Qty

19 x 19 x19

1.0

1,000

Product Code

Qty

76 x 76 x 16 x 16

2.0

25

76TPLP

76 x 76 x 16 x 16

2.0

2

Product Code

Size (mm) WxLxA

Thickness (mm)

Qty

50 x 50 x 13 75 x 75 x16

1.5 1.5

50 50

50CPLP 75CPLP

50 x 50 x 13 75 x 75 x16

1.5 1.5

4 4

Product Code

Size L x W (mm)

Thickness (mm)

Qty

75 x 16 100 x 16

1.85 2.0

50 50

75MPLP 100MPLP

75 x 16 100 x 16

1.85 2.0

4 4

Product Code

Size (mm)

Type

Qty

32 38 32 38

Plain Plain Slotted Slotted

1 1 1 1

Packs 19 x 19 x 19

1.0

CORNER PLATES -

10

A

Zinc (CR3)

Perfect for strengthening and repairing. Countersunk holes for a flush finish.

Boxes W

A

MENDING PLATES -

Zinc (CR3)

Perfect for strengthening and repairing. Countersunk holes for a flush finish. L W

MIRROR PLATES -

Brass

For mounting mirrors onto walls. Slotted and plain available.

DOUBLE SIDED TIMBER CONNECTORS - Galv. Designed to increase the joint strength when bolting two pieces of timber together.

50CPL 75CPL

Packs L

108

Thickness (mm)

76TPL

Packs 19ABRP

Size (mm) WxLxAxA

Boxes

Boxes 19ABR

W

L

W Product Code

L

Perfect for strengthening and repairing. Countersunk holes for a flush finish.

H

A

Perfect for strengthening draws and kitchen fitting.

Zinc (CR3)

Boxes 75MPL 100MPL

Packs

Packs PMP32P PMP38P SMP32P SMP38P

Product Code

Size (mm)

(mm)

50

M12

100

50

M12

15

50

M12

6

Bore

Qty

Boxes TCD50

Bags TCD50B

Packs TCD50P

A


SHIMS, PACKERS & WEDGES

BUILDERS METAL WORK

SHIMS, PACKERS & INTERLOCKING WEDGES Available in:

Nylon

SHIMS -

PACKERS -

Used for easy and quick levelling of battens, dry lining systems, stud work, door and window frames.

A solution for multiple applications, used to ensure correct weight distribution of glazed units and increase security around fixing points during frame fitting.

• Polypropylene material • Resistant to weather changes • Waterproof • Bag and tub includes two sizes

• Polypropylene material • Resistant to weather changes • Waterproof • Strong and durable

(mm)

Thickness (mm)

Colour

Qty

45 x 35 45 x 35 45 x 35 45 x 35 45 x 35 45 x 35 100 x 50 100 x 50 100 x 50 100 x 50 100 x 50 100 x 50

1 2 3 4 5 6 1 2 3 4 5 6

Yellow Green Blue Red Brown Black Yellow Green Blue Red Brown Black

40 40 40 40 20 20 40 40 40 40 20 20

1 2 3 4 5 6 1 2 3 4 5 6

Yellow Green Blue Red Brown Black Yellow Green Blue Red Brown Black

20 20 20 20 10 10 20 20 20 20 10 10

Size

Product Code

Mixed Tub

SHIMTUB

Product Code

Thickness Colour (mm)

Qty

Mixed Tub 100 x 28 100 x 28 100 x 28 100 x 28 100 x 28 100 x 28

1 2 3 4 5 6

Green Black White Grey Blue Red

60 80 100 40 40 80

100 x 28 100 x 28 100 x 28 100 x 28 100 x 28 100 x 28

1 2 3 4 5 6

Green Black White Grey Blue Red

30 40 50 20 20 40

P1GREEN P2BLACK P3WHITE P4GREY P5BLUE P6RED

100 x 28 100 x 28 100 x 28 100 x 28 100 x 28 100 x 28

1 2 3 4 5 6

Green Black White Grey Blue Red

200 200 200 200 200 200

Product Code

(mm)

Thickness Colour (mm)

Qty

PACKERTUB

Mixed Bag PACKER

Mixed Bag

SHIM

Size (mm)

45 x 35 45 x 35 45 x 35 45 x 35 45 x 35 45 x 35 100 x 50 100 x 50 100 x 50 100 x 50 100 x 50 100 x 50

Bags

INTERLOCKING WEDGES The wedges provide a support block of consistent dimensions and allow adjustment for levelling and aligning various building components.

Size

Bags PIW810 PIW915

80 x 30 x 10 90 x 45 x 15

1 2

Black Black

200 200

109


DRILLING 111 - SDS PLUS HAMMER BITS 112 - SDS PLUS STEELS 113 - SDS REBAR CUTTERS 114 - SDS MAX HAMMER BITS 114 - SDS MAX STEELS 115 - DRILL BITS 116 - TILE AND GLASS BITS

116 - DIAMOND DRILL BITS 117 - BRAD POINT BITS 117 - HEX FLAT WOOD BITS 117 - HINGE CUTTERS 118 - AUGER BITS 120 - JOBBER DRILLS 124 - BLACKSMITH DRILLS

124 - STUB DRILLS 125 - BROACHING CUTTERS 126 - COUNTERSINKS 127 - WIRE BRUSHES 132 - CHUCKS & ADAPTORS 133 - DRILL SETS


SDS PLUS HAMMER BITS

DRILLING

PROFESSIONAL SDS PLUS HAMMER BITS

Materials

A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. Product Code

(mm)

Working Length (mm)

Total Length (mm)

4.0 4.0 5.0 5.0 5.0 5.5 5.5 5.5 6.0 6.0 6.0 6.0 6.0 6.5 6.5 6.5 6.5 7.0 7.0 7.0 7.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 9.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 12.0 12.0 12.0 12.0

50 100 50 100 150 50 100 150 50 100 150 200 290 50 100 150 200 50 100 150 200 50 100 150 200 250 300 400 150 100 150 200 250 400 550 950 100 150 200 250

110 160 110 160 210 110 160 210 110 160 210 260 350 110 160 210 260 110 160 210 260 110 160 210 260 310 350 450 210 160 210 260 310 450 600 1000 160 210 260 310

Drill Ø

Singles AP4110 AP4160 AP5110 AP5160 AP5210 AP55110 AP55160 AP55210 AP6110 AP6160 AP6210 AP6260 AP6350 AP65110 AP65160 AP65210 AP65260 AP7110 AP7160 AP7210 AP7260 AP8110 AP8160 AP8210 AP8260 AP8310 AP8350 AP8450 AP9210 AP10160 AP10210 AP10260 AP10310 AP10450 AP10600 AP101000 AP12160 AP12210 AP12260 AP12310

Product Code

(mm)

Working Length (mm)

Total Length (mm)

12.0 12.0 12.0 13.0 14.0 14.0 14.0 14.0 14.0 14.0 15..0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 18.0 18.0 18.0 18.0 20.0 20.0 20.0 20.0 20.0 22.0 22.0 22.0 24.0 24.0 25.0 25.0 25.0 25.0 28.0 30.0

400 550 950 200 100 150 200 250 400 950 182 100 150 182 232 400 550 950 150 200 228 400 132 228 400 550 950 180 400 550 180 400 180 400 550 950 400 400

450 600 1000 260 160 210 260 310 450 1000 260 160 210 260 310 450 600 1000 210 260 310 450 210 310 450 600 1000 260 450 600 260 450 260 450 600 1000 450 450

Drill Ø

Singles AP12450 AP12600 AP121000 AP13260 AP14160 AP14210 AP14260 AP14310 AP14450 AP141000 AP15260 AP16160 AP16210 AP16260 AP16310 AP16450 AP16600 AP161000 AP18210 AP18260 AP18310 AP18450 AP20210 AP20310 AP20450 AP20600 AP201000 AP22260 AP22450 AP22600 AP24260 AP24450 AP25260 AP25450 AP25600 AP251000 AP28450 AP30450

111


SDS PLUS HAMMER BITS

DRILLING

TRADESMAN SDS PLUS HAMMER BITS

Materials

A cost effective drill bit with a tungsten carbide tip to give durability and precision when used in concrete and masonry.

Product Code

(mm)

Working Length (mm)

Total Length (mm)

4.0 5.0 5.0 5.0 5.5 5.5 5.5 6.0 6.0 6.0 6.0 6.5 6.5 6.5 6.5 7.0 7.0 7.0 8.0 8.0 8.0 8.0 8.0 8.0 10.0 10.0 10.0 10.0 10.0 10.0 12.0 12.0 12.0 12.0 12.0 12.0 14.0 14.0 14.0 14.0 14.0 14.0 16.0 16.0 16.0 16.0 16.0 16.0 18.0 18.0

100 50 100 150 50 100 150 50 100 150 200 50 100 150 200 50 100 150 50 100 150 200 250 400 100 150 200 250 400 550 100 150 200 250 400 550 100 150 200 250 400 550 100 150 200 250 400 550 150 200

160 110 160 210 110 160 210 110 160 210 260 110 160 210 260 110 160 210 110 160 210 260 310 450 160 210 260 310 450 600 160 210 260 310 450 600 160 210 260 310 450 600 160 210 250 300 450 600 200 260

Drill Ø

Singles SDS4160 SDS5110 SDS5160 SDS5210 SDS55110 SDS55160 SDS55210 SDS6110 SDS6160 SDS6210 SDS6260 SDS65110 SDS65160 SDS65210 SDS65260 SDS7110 SDS7160 SDS7210 SDS8110 SDS8160 SDS8210 SDS8260 SDS8310 SDS8450 SDS10160 SDS10210 SDS10260 SDS10310 SDS10450 SDS10600 SDS12160 SDS12210 SDS12260 SDS12310 SDS12450 SDS12600 SDS14160 SDS14210 SDS14260 SDS14310 SDS14450 SDS14600 SDS16160 SDS16210 SDS16260 SDS16310 SDS16450 SDS16600 SDS18210 SDS18260

112

Product Code

(mm)

Working Length (mm)

Total Length (mm)

18.0 18.0 20.0 20.0 20.0 20.0 22.0 22.0 25.0

250 400 150 250 400 550 200 400 400

300 450 200 300 450 600 250 450 450

Drill Ø

Singles SDS18310 SDS18450 SDS20210 SDS20310 SDS20450 SDS20600 SDS22260 SDS22450 SDS25450

SDS PLUS STEELS

POINT

TILE

SPADE/CHISEL

GOUGE

NOT TO BE USED IN ROTARY MODE. POINT - Breaks up concrete and masonry. TILE - Angled head design for easy removal of tiles, plaster or rendering. CHISEL \ SPADE - Breaks up concrete and masonry. Also removes plaster or rendering. GOUGE - Removes mortar from brickwork prior to re-pointing. Product Code

Description

(mm)

Total Length (mm)

N/A 20 40 22 40

250 250 250 250 250

Width

Singles SDSP SDSC SDSS SDSG SDST

Point Chisel Spade Gouge Tile


SDS REBAR CUTTERS

DRILLING

SDS SHANK REBAR CUTTERS

Materials

Used to drill through in-situ rebar when drilling into concrete. USE ROTARY MODE ONLY.

Rotary rebar cutters are designed for use in SDS plus hammer machines switched to ROTARY MODE ONLY. Drilling with the hammer action switched on will result in serious damage to the tool. Please read the instructions and use the recommended R.P.M’S.

SHANK REBAR CUTTER

HEAD ONLY

Used to drill through in-situ rebar when drilling into concrete. USE ROTARY MODE ONLY.

Used with rebar adaptor to drill through in-situ rebar when drilling into concrete. USE ROTARY MODE ONLY.

How to Guide

Product Code

Drill Ø (mm)

Working Length

Total Length

(mm)

(mm)

Rec. RPM

Singles MSRB10* MSRB12* MSRB14* MSRB16 MSRB18 MSRB20

10.0 12.0 14.0 16.0 18.0 20.0

250 250 250 250 250 250

* Products are not vented.

300 300 300 300 300 300

750-1000 600-850 600-850 500-750 500-750 460-600

Product Code

Drill Ø (mm)

Working Length

Total Length

(mm)

(mm)

110 110 110 110

260 260 260 260

Rec. RPM

Singles MRB22HO MRB24HO MRB25HO MRB26HO

22.0 24.0 25.0 26.0

460-600 350-500 350-500 350-500

ADAPTOR FOR CUTTER HEADS Used with 22mm and above rebar cutter heads. USE ROTARY MODE ONLY.

Product Code

(mm)

Working Length (mm)

Total Length (mm)

-

220

260

Drill Ø

Singles STDS212

113


SDS MAX HAMMER BITS

DRILLING

SDS MAX HAMMER BITS

Materials

SDS Max is an alternative system to the SDS Plus. Used mainly to drill dense materials or where there is heavy usage.

Product Code

(mm)

Working Length (mm)

Total Length (mm)

12 12 14 14 16 16 18 18 18 18 20

195 395 195 395 195 395 195 395 545 775 195

340 540 340 540 340 540 340 540 690 920 340

Drill Ø

Singles SDSM12340 SDSM12540 SDSM14340 SDSM14540 SDSM16340 SDSM16540 SDSM18340 SDSM18540 SDSM18690 SDSM18920 SDSM20340

Product Code

(mm)

Working Length (mm)

Total Length (mm)

20 20 20 24 25 25 25 26 26 32 32

395 545 775 195 195 395 545 195 395 195 395

540 690 920 340 340 540 690 340 540 340 540

Drill Ø

Singles SDSM20540 SDSM20690 SDSM20920 SDSM24340 SDSM25340 SDSM25540 SDSM25690 SDSM26340 SDSM26540 SDSM32340 SDSM32540

SDS MAX STEELS

Materials

A range of tools designed for use in rotation stop hammers with the larger SDS Max tool holder system. NOT TO BE USED IN ROTARY MODE. POINT - Breaks up concrete and masonry. CHISEL - Breaks up concrete and masonry, removes plaster or rendering. SLOTTING TOOL - Removes mortar from brickwork prior to re-pointing.

Product Code

Description

Width

Total

(mm) Length (mm)

Singles SDSMP280 Point N/A SDSMP400 Point N/A SDSMC280 Chisel 25 SDSMC400 Chisel 25 SDSMC40050 Wide Chisel 50 SDSMC30075 Extra Wide Chisel 75 SDSMST Slotting Tool 25

114

280 400 280 400 400 300 280

POINT

CHISEL

SLOTTING


MULTI-PURPOSE / MASONRY DRILL BITS

DRILLING

TCT MULTI-PURPOSE DRILL BITS

Materials

Designed to drill steel, wood, masonry, PVCu, ceramics and concrete. Diamond-ground cutting edges allow fast drilling even in hard materials. USE ON ROTARY ONLY.

Product Code

Drill Ø (mm)

Working Total Length (mm) Length (mm)

Singles MP475 MP4150 MP585 MP5150 MP55100 MP55150 MP6100

Product Code

Drill Ø (mm)

Working Total Length (mm) Length (mm)

Singles 4.0 4.0 5.0 5.0 5.5 5.5 6.0

40 87 55 87 58 87 58

75 150 85 150 100 150 100

MP6150 MP65100 MP65150 MP7100 MP7150 MP8150 MP10150

6.0 6.5 6.5 7.0 7.0 8.0 10.0

MASONRY DRILL BITS

87 58 87 58 87 87 87

150 100 150 100 150 150 150

Materials

A premium quality masonry bit for use in cordless and corded drill drivers in both rotary and hammer action. Product Code

(mm)

Working Length (mm)

Total Length (mm)

4.0 4.0 5.0 5.0 5.5 5.5 6.0 6.0 6.0 6.0 6.5 6.5 6.5 6.5 7.0 7.0 7.0 8.0 8.0 8.0 8.0

40 87 47 87 47 87 58 87 120 220 58 87 120 220 58 87 220 75 87 120 220

75 150 85 150 85 150 100 150 200 300 100 150 200 300 100 150 300 120 150 200 300

Drill Ø

(mm)

Working Length (mm)

Total Length (mm)

10.0 10.0 10.0 10.0 10.0 12.0 12.0 12.0 12.0 14.0 14.0 14.0 16.0 16.0 16.0 16.0 20.0 20.0 25.0

75 87 120 220 300 90 127 220 300 90 127 300 90 127 220 300 152 300 300

120 150 200 300 400 150 200 300 400 150 200 400 150 200 300 400 200 400 400

Drill Ø

Singles

Singles APM475 APM4150 APM585 APM5150 APM5585 APM55150 APM6100 APM6150 APM6200 APM6300 APM65100 APM65150 APM65200 APM65300 APM7100 APM7150 APM7300 APM8120 APM8150 APM8200 APM8300

Product Code

APM10120 APM10150 APM10200 APM10300 APM10400 APM12150 APM12200 APM12300 APM12400 APM14150 APM14200 APM14400 APM16150 APM16200 APM16300 APM16400 APM20200 APM20400 APM25400

115


GLASS & DIAMOND DRILL BITS

DRILLING

TCT TILE & GLASS BITS

Materials

For accurate drilling of glass and ceramics. A lubricant such as water or turpentine is recommended when drilling glass. USE AT LOW R.P.M IN ROTARY MODE ONLY. Product Code

(mm)

Working Length (mm)

5.0 6.0 6.5 7.0 8.0 10.0

60 60 75 75 75 80

Drill Ø

Singles TG5 TG6 TG65 TG7 TG8 TG10

DIAMOND DRILL BITS DRY

WET

Ideal for drilling a clean hole into hard materials such as ceramics, porcelain, marble and slate.

Used to drill an accurate hole into hard materials such as ceramics, porcelain, marble and slate. Use wet.

How to Guide

How to Guide

Product Code

(mm)

Working Length (mm)

Product Code

5 6 7 8 10 12 15 20 25

65 65 80 80 80 80 80 80 80

DD5 DD6 DD7 DD8 DD10 DD12 DD20 DD25 DD115

Drill Ø

Singles VBD5 VBD6 VBD7 VBD8 VBD10 VBD12 VBD15 VBD20 VBD25

116

Materials

(mm)

Working Length (mm)

5 6 7 8 10 12 20 25 115

35 35 35 35 35 35 35 35 35

Drill Ø

Singles


BRAD POINT & FLAT WOOD BITS

DRILLING

HSS BRAD POINT WOOD BITS

HEXAGONAL SHANK FLAT WOOD BITS

Materials

Materials

For drilling small diameter holes into various types of timber and man-made boards.

The twin cutting edges and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards.

Product Code

(mm)

Working Length (mm)

Total Length (mm)

3.0 4.0 5.0 6.0 7.0 8.0 10.0

33 43 52 57 69 75 87

60 75 87 92 108 118 133

Drill Ø

Singles BP3 BP4 BP5 BP6 BP7 BP8 BP10

TCT HINGE CUTTERS

Product Code

(mm)

Total Length (mm)

6.0 8.0 10.0 12.0 13.0 14.0 16.0 18.0 19.0 20.0 22.0 24.0 25.0 26.0 28.0 30.0 32.0 35.0 38.0

152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152

Drill Ø

Singles FB6 FB8 FB10 FB12 FB13 FB14 FB16 FB18 FB19 FB20 FB22 FB24 FB25 FB26 FB28 FB30 FB32 FB35 FB38

Materials

1/4” EXTENSION RODS

Superb quality, heavy duty tungsten carbide-tipped hinge drill with centre point and outer spurs. Designed to drill 35mm holes for concealed hinges. Product Code

Overall Length (mm)

Shank Ø

(mm)

35

60

12.7

Drill Ø

(mm)

Singles 35HC

1/4” extension rods to be used where there is restrictive access and in conjunction with a ¼” shank Flat Wood Bit, (Allen key provided). Product Code FBEQR150 FBEQR300

Drill Ø (mm)

Length

6.35 Q/R 6.35 Q/R

150 300

117


AUGER BITS

DRILLING

WOOD AUGER BITS

Materials

A high performance wood drill for drilling deep holes into various types of timber. Available with Hex or SDS Plus shank.

HEX SHANK Product Code

Product Code

(mm)

Working Length (mm)

Total Length (mm)

10.0 12.0 16.0 20.0 22.0 25.0 32.0 8.0 14.0 16.0 19.0 20.0 22.0 25.0 28.0 30.0 32.0 6.0 8.0 10.0 12.0 13.0 14.0 16.0 18.0 19.0 20.0 22.0

55 55 55 55 55 55 55 90 90 90 90 90 90 90 90 90 90 165 165 165 165 165 165 165 165 165 165 165

100 100 100 100 100 100 100 155 155 155 155 155 155 155 155 155 155 235 235 235 235 235 235 235 235 235 235 235

Drill Ø

Singles HA10100 HA12100 HA16100 HA20100 HA22100 HA25100 HA32100 HA8155 HA14155 HA16155 HA19155 HA20155 HA22155 HA25155 HA28155 HA30155 HA32155 HA6235 HA8235 HA10235 HA12235 HA13235 HA14235 HA16235 HA18235 HA19235 HA20235 HA22235

* CARPENTERS KIT on page 126

118

Working Length (mm)

Total Length (mm)

24.0 25.0 26.0 28.0 30.0 32.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 26.0

165 165 165 165 165 165 385 385 385 385 385 385 385 385 385

235 235 235 235 235 235 460 460 460 460 460 460 460 460 460

Singles HA24235 HA25235 HA26235 HA28235 HA30235 HA32235 HA8460 HA10460 HA12460 HA14460 HA16460 HA18460 HA20460 HA22460 HA26460

SDS PLUS SHANK Product Code

(mm)

Working Length (mm)

Total Length (mm)

6.0 8.0 10.0 12.0 16.0 20.0 22.0 25.0

100 100 160 160 160 160 160 160

200 200 235 235 235 235 235 235

(mm)

Working Length (mm)

Total Length (mm)

16.0 20.0 25.0

80 80 80

159 159 159

Drill Ø

Singles SA6200 SA8200 SA10235 SA12235 SA16235 SA20235 SA22235 SA25235

SPEED WOOD AUGER BITS

Speed Augers with a four fluted cutter, designed for rapid chip ejection and cleaner hole drilling in timber.

(mm)

Drill Ø

Materials

Product Code

Drill Ø

Singles SPA16 SPA20 SPA25


HIGH PERFORMANCE AUGER BITS

DRILLING

HIGH PERFORMANCE LONG REACH AUGER BITS

HIGH PERFORMANCE IMPACT AUGER BITS

Materials

Materials

A high performance Auger bit specifically designed to drill a deep clean hole into all natural woods. This high quality drill will out perform a standard Auger drill in lifetime and performance.

A high performance Auger bit specifically designed to drill a deep clean hole into all natural woods. This high quality drill will out perform a standard Auger drill in lifetime and performance.

KEY FEATURES • 3x longer life • Spurred cutting edge for a fast even cut • Unique twist design for clean, smooth chip removal • Burr-free lead screw for quick, on-target starts without material build up • High carbon steel (S55C) with precise all hardened treatment. • Made in Japan

DESIGNED FOR IMPACT DRIVERS.

Product Drill Ø (mm) Code

Working Length (mm)

Total Length

260 300 300 351 351 351 351 351 351 351 351 351

300 400 400 457 457 457 457 457 457 457 457 457

(mm)

Shank (mm)

Singles DA5 DA6 DA8 DA10 DA12 DA14 DA16 DA18 DA20 DA22 DA25 DA32

KEY FEATURES • 3x longer life • Spurred cutting edge for a fast even cut • Unique twist design for clean, smooth chip removal • Burr-free lead screw for quick, on-target starts without material build up • High carbon steel (S55C) with precise all hardened treatment. • Made in Japan

Product Drill Ø (mm) Code

Working Length (mm)

Total Length

90 100 100 110 120 130 130 130 135 135 135 135

140 160 170 180 190 200 200 200 205 205 205 205

(mm)

Shank (mm)

Singles 5 6 8 10 12 14 16 18 20 22 25 32

4.7 Round 4.7 Round 8.0 Hex 11.0 QC 11.0 QC 11.0 QC 11.0 QC 11.0 QC 11.0 QC 11.0 QC 11.0 QC 11.0 QC

IA5 IA6 IA8 IA10 IA12 IA14 IA16 IA18 IA20 IA22 IA25 IA32

5 6 8 10 12 14 16 18 20 22 25 32

6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 10.0 Hex

119


COBALT JOBBER DRILLS

DRILLING

COBALT JOBBER DRILLS

Materials

Manufactured from a high quality M35 grade steel. Ideal for drilling holes into stainless steel and other alloy materials. The 135° split point prevents the bit from drifting.

Product Code

Drill Ø

Flute

Total

Pack

(mm) Length (mm) Length (mm) Qty

Tubes HSSCO1 HSSCO15 HSSCO2 HSSCO25 HSSCO3 HSSCO32 HSSCO33 HSSCO35 HSSCO4 HSSCO42 HSSCO45 HSSCO48 HSSCO5 HSSCO55 HSSCO6 HSSCO65 HSSCO68 HSSCO7 HSSCO75 HSSCO8 HSSCO85 HSSCO9 HSSCO95 HSSCO100 HSSCO102 HSSCO105 HSSCO110 HSSCO115 HSSCO120 HSSCO125 HSSCO130

Product Code

Drill Ø

Flute

Total

Pack

(mm) Length (mm) Length (mm) Qty

Singles 1.0 1.5 2.0 2.5 3.0 3.2 3.3 3.5 4.0 4.2 4.5 4.8 5.0 5.5 6.0 6.5 6.8 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.2 10.5 11.0 11.5 12.0 12.5 13.0

12 18 24 30 33 36 36 39 43 43 47 52 52 57 57 63 69 69 69 75 75 81 81 87 87 87 94 94 101 101 101

34 40 49 57 61 65 65 70 75 75 80 86 86 93 93 101 109 109 109 117 117 125 125 133 133 133 142 142 151 151 151

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5

HSSCOR1 HSSCOR15 HSSCOR2 HSSCOR25 HSSCOR3 HSSCOR32 HSSCOR33 HSSCOR35 HSSCOR4 HSSCOR42 HSSCOR45 HSSCOR48 HSSCOR5 HSSCOR55 HSSCOR6 HSSCOR65 HSSCOR7 HSSCOR75 HSSCOR8 HSSCOR85 HSSCOR9 HSSCOR95 HSSCOR100 HSSCOR105 HSSCOR110 HSSCOR115 HSSCOR120 HSSCOR125 HSSCOR130

1.0 1.5 2.0 2.5 3.0 3.2 3.3 3.5 4.0 4.2 4.5 4.8 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0

12 18 24 30 33 36 36 39 43 43 47 52 52 57 57 63 69 69 75 75 81 81 87 87 94 94 101 101 101

34 40 49 57 61 65 65 70 75 75 80 86 86 93 93 101 109 109 117 117 125 125 133 133 142 142 151 151 151

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

COBALT JOBBER DRILL SET Available in 19 or 25 piece sets

Product Code HSSCO19DS HSSCO25DS

120

Description 19pcs. 1-10mm (increments of 0.5mm) 25pcs. 1-13mm (increments of 0.5mm)


M2 FULLY GROUND JOBBER DRILLS

DRILLING

M2 FULLY GROUND JOBBER DRILLS

Materials

Manufactured from a high grade M2 tool steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting.

Product Code

Drill Ø

Flute

Total

Pack

(mm) Length (mm) Length (mm) Qty

Tubes HSSG1 HSSG15 HSSG2 HSSG24 HSSG25 HSSG3 HSSG31 HSSG32 HSSG33 HSSG35 HSSG36 HSSG38 HSSG4 HSSG41 HSSG42 HSSG45 HSSG48 HSSG49 HSSG5 HSSG51 HSSG53 HSSG55 HSSG6 HSSG64 HSSG65 HSSG68 HSSG7 HSSG75 HSSG8 HSSG85 HSSG9 HSSG95 HSSG100 HSSG102 HSSG105 HSSG110 HSSG115 HSSG120 HSSG125 HSSG130

Drill Ø

Flute

Total

Pack

(mm) Length (mm) Length (mm) Qty

Singles 1.0 1.5 2.0 2.4 2.5 3.0 3.1 3.2 3.3 3.5 3.6 3.8 4.0 4.1 4.2 4.5 4.8 4.9 5.0 5.1 5.3 5.5 6.0 6.4 6.5 6.8 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.2 10.5 11.0 11.5 12.0 12.5 13.0

12 18 24 30 30 33 36 36 36 39 39 43 43 43 43 47 52 52 52 52 52 57 57 63 63 69 69 69 75 75 81 81 87 87 87 94 94 101 101 101

34 40 49 57 57 61 65 65 65 70 70 75 75 75 75 80 86 86 86 86 86 93 93 101 101 109 109 109 117 117 125 125 133 133 133 142 142 151 151 151

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5

2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0

24 30 33 39 43 47 52 57 57 63 69

49 57 61 70 75 80 86 93 93 101 109

1 1 1 1 1 1 1 1 1 1 1

Singles HSSGR2 HSSGR25 HSSGR3 HSSGR35 HSSGR4 HSSGR45 HSSGR5 HSSGR55 HSSGR6 HSSGR65 HSSGR7

Product Code

HSSGR8 HSSGR85 HSSGR9 HSSGR100 HSSGR110 HSSGR120 HSSGR130

8.0 8.5 9.0 10.0 11.0 12.0 13.0

75 75 81 87 94 101 101

117 117 125 133 142 151 151

1 1 1 1 1 1 1

Flute

Total

Pack

IMPERIAL Product Code

Drill Ø

(Imp.) Length (Imp.) Length (Imp.) Qty

Tubes HSIG116 HSIG132 HSIG364 HSIG564 HSIG332 HSIG764 HSIG18 HSIG964 HSIG532 HSIG316 HSIG1364 HSIG732 HSIG14 HSIG516 HSIG2164 HSIG38 HSIG12

1/16 1/32 3/64 5/64 3/32 7/64 1/8 9/64 5/32 3/16 13/64 7/32 1/4 5/16 21/64 3/8 1/2

7/8 1/2 3/4 1 11/4 11/2 15/8 13/4 2 25/16 27/16 21/2 23/4 33/16 35/16 35/8 41/2

17/8 13/8 11/4 2 21/4 25/8 23/4 27/8 21/8 31/2 35/8 33/4 4 41/2 45/8 5 6

10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5

M2 JOBBER DRILL SET Available in 19 or 25 piece sets

Product Code HSSG19DS HSSG25DS

Description 19pcs. 1-10mm (increments of 0.5mm) 25pcs. 1-13mm (increments of 0.5mm)

121


ROLL FORGED JOBBER DRILLS

DRILLING

ROLL FORGED JOBBER DRILLS

Materials

An economic HSS drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting.

Product Code

Drill Ø

Flute

Total

Pack

(mm) Length (mm) Length (mm) Qty

Tubes HSSR1 HSSR15 HSSR2 HSSR25 HSSR3 HSSR32 HSSR33 HSSR35 HSSR36 HSSR4 HSSR42 HSSR45 HSSR48 HSSR49 HSSR5 HSSR52 HSSR55 HSSR6 HSSR65 HSSR68 HSSR7 HSSR72 HSSR75 HSSR8 HSSR85 HSSR9 HSSR95 HSSR96 HSSR100 HSSR102 HSSR105 HSSR110 HSSR115 HSSR120 HSSR125 HSSR130

122

Drill Ø

Flute

Total

Pack

(mm) Length (mm) Length (mm) Qty

Packs 1.0 1.5 2.0 2.5 3.0 3.2 3.3 3.5 3.6 4.0 4.2 4.5 4.8 4.9 5.0 5.2 5.5 6.0 6.5 6.8 7.0 7.2 7.5 8.0 8.5 9.0 9.5 9.6 10.0 10.2 10.5 11.0 11.5 12.0 12.5 13.0

12 18 24 30 33 36 36 39 39 43 43 47 52 52 52 52 57 57 63 69 69 69 69 75 75 81 81 87 87 87 87 94 94 101 101 101

34 40 49 57 61 65 65 70 70 75 75 80 86 86 86 86 93 93 101 109 109 109 109 109 109 125 125 133 133 133 133 142 142 151 151 151

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

1.0 1.5 2.0 2.5 3.0 3.3 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 8.0

12 18 24 30 33 36 39 43 47 52 57 57 63 69 75

34 40 49 57 61 65 70 75 80 86 93 93 101 109 109

2 2 2 2 2 2 2 2 2 2 2 2 1 1 1

Packs HSSRR1 HSSRR15 HSSRR2 HSSRR25 HSSRR3 HSSRR33 HSSRR35 HSSRR4 HSSRR45 HSSRR5 HSSRR55 HSSRR6 HSSRR65 HSSRR7 HSSRR8

Product Code

HSSRR85 HSSRR9 HSSRR100 HSSRR110 HSSRR120 HSSRR130

8.5 9.0 10.0 11.0 12.0 13.0

75 81 87 94 101 101

117 125 133 142 151 151

1 1 1 1 1 1

Flute

Total

Pack

IMPERIAL Product Code

Drill Ø

(Imp.) Length (Imp.) Length (Imp.) Qty

Tubes HSIR116 HSIR564 HSIR332 HSIR764 HSIR18 HSIR964 HSIR532 HSIR1164 HSIR316 HSIR732 HSIR14 HSIR1764 HSIR516 HSIR38 HSIR12

1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 7/32 1/4 17/64 5/16 3/8 1/2

7/8 1 11/4 11/2 15/8 13/4 2 21/8 25/16 21/2 23/4 27/8 33/16 35/8 41/2

17/8 2 21/4 25/8 23/4 27/8 31/8 31/4 31/2 33/4 4 41/8 41/2 5 6

10 10 10 10 10 10 10 10 10 10 10 10 5 5 5

ROLL FORGED JOBBER DRILL SET Available in 19, 25 or 170 piece sets

Product Code HSSR19DS HSSR25DS HSSR170DS

Description 19pcs. 1-10mm (increments of 0.5mm) 25pcs. 1-13mm (increments of 0.5mm) 170pcs. x10pcs.1-8mm (increments of 0.5mm) x5pcs. 8.5-10mm (increments of 0.5mm)


M2 FULLY GROUND LONG JOBBER DRILLS

DRILLING

M2 FULLY GROUND LONG JOBBER DRILLS

Materials

For drilling carbon and alloy steel, cast iron, non-ferrous metal and plastics. 135° split point tip from 3mm and above prevents ‘walking’ and enables faster penetration. Product Code

Drill Ø

Flute

Total

Pack

(mm) Length (mm) Length (mm) Qty

Tubes

Product Code

Drill Ø

Flute

Total

Pack

(mm) Length (mm) Length (mm) Qty

Singles

HSSGL2 HSSGL25 HSSGL3 HSSGL32 HSSGL35 HSSGL4 HSSGL42 HSSGL45 HSSGL48 HSSGL5 HSSGL55 HSSGL6 HSSGL65 HSSGL7 HSSGL8 HSSGL85 HSSGL9 HSSGL100

2.0 2.5 3.0 3.2 3.5 4.0 4.2 4.5 4.8 5.0 5.5 6.0 6.5 7.0 8.0 8.5 9.0 10.0

56 62 66 69 73 78 78 82 87 87 91 91 97 102 109 109 115 121

85 95 100 106 112 119 119 126 132 132 139 139 148 156 165 165 175 184

10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5

HSSGLR3 HSSGLR35 HSSGLR4 HSSGLR45 HSSGLR5 HSSGLR55 HSSGLR6 HSSGLR65 HSSGLR7 HSSGLR8

3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 8.0

66 73 78 82 87 91 91 97 102 109

100 112 119 126 132 139 139 148 156 165

1 1 1 1 1 1 1 1 1 1

Driver Bits & Adaptors IMPACT BITS POZI PHILLIPS

TIMDRIVE SLOTTED SQUARE

HEX NUT SETTERS

MAGNETIC ADAPTORS

SEE PAGES

163 - 166 123


BLACKSMITH & STUB DRILLS

DRILLING

BLACKSMITHS DRILLS

Materials

Manufactured from a high grade M2 tool steel. This durable engineering quality drill will give a consistent rapid performance when drilling larger diameter holes into all non-alloy materials. Can be used in a 1/2” chuck.

Product Code

(mm)

Flute Length (mm)

Total Length (mm)

13.5 14.0 14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 18.5 19.0 19.5 20.0 22.0 24.0 25.0

75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75

160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160

Drill Ø

Singles BS135 BS14 BS145 BS15 BS155 BS16 BS165 BS17 BS175 BS18 BS185 BS19 BS195 BS20 BS22 BS24 BS25

STUB DRILLS

Materials

Manufactured from a high grade M2 tool steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting. Mainly used for drilling sheet metal.

Product Code

Drill Ø

Flute

Total

Pack

(mm) Length (mm) Length (mm) Qty

Packs HSSGS32 HSSGS33 HSSGS4 HSSGS41 HSSGS42 HSSGS49 HSSGS5 HSSGS51

124

3.2 3.3 4.0 4.1 4.2 4.9 5.0 5.1

18 18 22 22 22 26 26 26

49 49 55 55 55 62 62 62

10 10 10 10 10 10 10 10


BROACHING CUTTERS

DRILLING

BROACHING CUTTERS

Materials

Manufactured from a high grade M2 tool steel for drilling heavy gauge non-alloy materials, with magnetic drills. Pilot rod must be used to prevent drifting.

50mm LONG REACH

30mm SHORT REACH Product Code

Cutter Ø

Cutter Depth

(mm)

(mm)

12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 35 36 38 39 40 50

30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30

Singles BCS12 BCS13 BCS14 BCS15 BCS16 BCS17 BCS18 BCS19 BCS20 BCS21 BCS22 BCS23 BCS24 BCS25 BCS26 BCS27 BCS28 BCS29 BCS30 BCS31 BCS32 BCS33 BCS35 BCS36 BCS38 BCS39 BCS40 BCS50

Product Code

Cutter Ø

Cutter Depth

(mm)

(mm)

12 13 14 15 16 17 18 20 21 22 24 26 28 30 32 39

50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50

Singles BCL12 BCL13 BCL14 BCL15 BCL16 BCL17 BCL18 BCL20 BCL21 BCL22 BCL24 BCL26 BCL28 BCL30 BCL32 BCL39

REPLACEMENT PILOT PINS Product Code

Cutter Ø

Cutter Depth

(mm)

(mm)

12-50 12-50

30 50

Singles A pilot pin used with broaching cutters in order to centre the bit when drilling.

BCL301250 BCL501250

125


COUNTERSINKS, CUTTERS & STEP DRILLS

DRILLING

COUNTERSINKS

Materials

DE-BURRING COUNTERSINKS

3 FLUTE COUNTERSINKS

A single flute countersink designed for general purpose countersinking, chamfering or de-burring in alloy and non-alloy metals, timber and man-made boards.

These engineering quality countersinks drill a precise recess to allow a fastener head to sit flush in alloy and non-alloy metals, timber and man-made boards.

Product Code

Product Code

Ø (mm)

Singles CS25 CS510 CS1015 CS1520

Ø

Screw Ø

Screw Ø

(mm)

(mm)

(imp.)

6.3 8.3 10.4 12.4 16.5 20.5 25.0

3.0 3.5-4.0 4.5-5.0 6.0 8.0 -

4-5 6-8 10 12 16 -

Singles 2 to 5 5 to 10 10 to 15 15 to 20

CS63 CS83 CS104 CS124 CS165 CS205 CS250

CONE CUTTERS & STEP DRILLS

CONE CUTTERS

STEP DRILLS

For drilling, enlarging and de-burring holes in thin sheet metal up to a thickness of 2mm

Ideal for drilling, enlarging or de-burring a precise hole into thin materials such as alloy and nonalloy metals up to a thickness of 4mm.

Product Code

Product Code

Ø (mm)

Singles CC314 CC520 CC531 CC1631

126

Materials

Ø (mm)

Singles 3 to 14 5 to 20 5 to 31 16 to 31

SD412 SD420 SD430 SD439

4,5,6,7,8,9,10,11,12 4,6,8,10,12,14,16,18,20 4,6,8,10,12,15,18,20,22,24,26,28,30 4,6,8,10,12,21,25,27,30,33,36,39


WIRE BRUSHES

DRILLING

CRIMPED STEEL WIRE BRUSH Suitable for use with drill drivers when cleaning and polishing metal surfaces. The crimped wire is ideal for lightly removing loose paint, rust or dirt without scarring the base material.

Materials

Product Code

Ø (mm)

Shaft

Wire Thickness

Max R.P.M

1/4” Hex 1/4” Hex 1/4” Hex

0.3 0.3 0.3

4,500 4,500 4,500

Singles 50SWC 75SWC 100SWC

50 75 100

CRIMPED STEEL WIRE END BRUSH Suitable for use with drill drivers when cleaning and polishing metal surfaces. The crimped wire is ideal for lightly removing loose paint, rust or dirt without scarring the base material.

Materials

Product Code

Ø (mm)

Shaft

Wire Thickness

Max R.P.M

1/4” Hex

0.3

4,500

Singles 25SEC

25

CRIMPED STEEL WIRE CUP BRUSH Suitable for use with drill drivers when cleaning and polishing metal surfaces. The crimped wire is ideal for lightly removing loose paint, rust or dirt without scarring the base material.

Materials

Product Code

Ø (mm)

Wire Thickness

Max R.P.M

1/4” Hex 1/4” Hex

0.3 0.3

4,500 4,500

Shaft

Wire Thickness

Max R.P.M

1/4"

0.3

4,500

Singles 50SCC 75SCC

50 75

TWIST KNOT STEEL WIRE WHEEL BRUSH Suitable for use with drill driver when cleaning metal, masonry and wood surfaces. The twist brush is ideal for aggressive removal of paint, rust, rubber, concrete or dirt.

Shaft

Product Code

Materials

Ø (mm)

Singles 75SWT

75

127


DRILLING

WIRE BRUSHES

NYLON WHEEL BRUSH Suitable for use with drill driver when cleaning stone, masonry and wood surfaces. The nylon brush is less aggressive and an ideal option for light de-burring, polishing and finishing

Materials

Product Code

Ø (mm)

Shaft

Wire Thickness

Max R.P.M

1/4” Hex 1/4” Hex

1.2 1.2

4,500 4,500

Singles 75SWN 100SWN

75 100

NYLON CUP BRUSH Suitable for use with drill driver when cleaning stone, masonry and wood surfaces. The nylon brush is less aggressive and an ideal option for light de-burring, polishing and finishing

Materials

Product Code

Ø (mm)

Shaft

Wire Thickness

Max R.P.M

1/4” Hex 1/4” Hex

1.2 1.2

4,500 4,500

Singles 50SCN 75SCN

50 75

CRIMPED STEEL WIRE CUP BRUSH Suitable for use with angle grinders when cleaning and polishing metal surfaces. The crimped wire is ideal for lightly removing loose paint, rust or dirt without scarring the base material.

Materials

Product Code

Ø (mm)

128

Wire Thickness

Max R.P.M

M14 M14 M14 M14

0.3 0.3 0.3 0.3

12,500 8,500 6,500 6,500

Shaft

Wire Thickness

Max R.P.M

M14 M14

0.5 0.5

8,500 8,500

Singles 75TCC 100TCC 125TCC 150TCC

75 100 125 150

CRIMPED STAINLESS STEEL WIRE CUP BRUSH Suitable for use with angle grinders when cleaning and polishing stainless steel and aluminium. The crimped stainless steel wire is ideal for lightly removing loose paint, rust or dirt without scarring or contaminating the base material.

Shaft

Product Code

Materials

Ø (mm)

Singles 75TCCSS 100TCCSS

75 100


WIRE BRUSHES

DRILLING

TWISTED KNOT STEEL WIRE CUP BRUSH Suitable for use with angle grinders when cleaning metal, masonry and wood surfaces. The 0.5mm steel left-hand twist wire is hard wearing and gives an aggressive removal of paint, rust, rubber, concrete or dirt whist maintaining its shape and improves user control. The metal ring around the base of the cup reduces the likelihood of centrifugal-splay and can also be removed to increase usage life.

Materials

Product Code

Ø (mm)

Wire Thickness

Max R.P.M

M14 M14

0.5 0.5

8,500 8,500

Shaft

Wire Thickness

Max R.P.M

M14

0.5

8,500

Singles 80TCT 100TCT

80 100

TWISTED KNOT STAINLESS STEEL WIRE CUP BRUSH Suitable for use with angle grinders when cleaning stainless steel and aluminium. The 0.5mm left-hand twist wire is hard wearing and gives an aggressive removal of paint, rust, rubber, concrete or dirt whist maintaining its shape. The stainless steel reduces contamination of the base material. The metal ring around the base of the cup reduces the likelihood of centrifugal-splay and can also be removed to increase usage life.

Shaft

Product Code

Materials

Ø (mm)

Singles 100TCTSS

100

CRIMPED STEEL WIRE BEVEL BRUSH Suitable for use with angle grinders when cleaning and polishing metal surfaces. The crimped wire is ideal for lightly removing loose paint, rust or dirt without scarring the base material.

Materials

Product Code

Ø (mm)

Wire Thickness

Max R.P.M

M14

0.3

12,500

Shaft

Wire Thickness

Max R.P.M

M14

0.3

12,500

Singles 115TBC

115

CRIMPED STAINLESS STEEL WIRE BEVEL BRUSH Suitable for use with angle grinders when cleaning and polishing metal surfaces. The crimped stainless steel wire is ideal for lightly removing loose paint, rust or dirt without scarring or contaminating the base material.

Shaft

Product Code

Ø (mm)

Materials

Singles 115TBCSS

115

129


DRILLING

WIRE BRUSHES

TWISTED KNOT STEEL WIRE BEVEL BRUSH Suitable for use with angle grinders when cleaning metal, masonry and wood surfaces. The twist brush is ideal for aggressive removal of paint, rust, rubber, concrete or dirt. Ideal for accessing awkward areas.

Materials

Product Code

100TBT

Product Code

100

130

Max R.P.M

M14

0.5

12,500

Ø (mm)

Shaft

Wire Thickness

Max R.P.M

M14

0.5

12,500

Shaft

Wire Thickness

Max R.P.M

M14

0.5

12,500

Shaft

Wire Thickness

Max R.P.M

M14

0.5

12,500

Singles 100TBTSS

100

Materials

Product Code

Ø (mm)

Singles 115TWT

TWISTED KNOT STAINLESS STEEL WIRE BRUSH Suitable for use with angle grinders when cleaning metal, masonry and wood surfaces. The twist brush is ideal for aggressive removal of paint, rust, rubber, concrete or dirt. Ideal for accessing awkward areas. The stainless steel reduces contamination of the base material.

Wire Thickness

Materials

TWISTED KNOT STEEL WIRE BRUSH Suitable for use with angle grinders when cleaning metal, masonry and wood surfaces. The twist brush is ideal for aggressive removal of paint, rust, rubber, concrete or dirt. Ideal for accessing awkward areas.

Shaft

Singles

TWISTED KNOT STAINLESS STEEL WIRE BEVEL BRUSH Suitable for use with angle grinders when cleaning metal, masonry and wood surfaces. The twist brush is ideal for aggressive removal of paint, rust, rubber, concrete or dirt. Ideal for accessing awkward areas. The stainless steel reduces contamination of the base material.

Ø (mm)

115

Materials

Product Code

Ø (mm)

Singles 115TWTSS

115


CHUCKS, KEYS & ADAPTOR SETS

DRILLING

TWISTED KNOT STEEL WIRE WHEEL BRUSH Suitable for use with 125 mm (5in) angle grinders with a 22.2 mm (7/8in) bore with a standard flange plate. Used when cleaning metal, masonry and wood surfaces. The twist brush is ideal for aggressive removal of paint, rust, rubber, concrete or dirt. Ideal for accessing awkward areas.

Materials

Product Code

Ø (mm)

Wire Thickness

Max R.P.M

22

0.5

12,500

Singles 125HWT

125

STEEL WIRE WHEEL BRUSH WITH PLASTIC REDUCER SET Suitable for use with a bench grinder when cleaning and polishing metal surfaces. The crimped wire is ideal for lightly removing loose paint, rust or dirt without scarring the base material.

Shaft

Materials

Product Code

Ø (mm)

Shaft

Wire Thickness

Max R.P.M

32 32

0.3 0.3

6,000 4,500

Singles 150HWC 200HWC

150 200

CHUCKS, KEYS & ADAPTOR SETS 3/8” CHUCK & KEY SETS

1/2” KEYLESS CHUCK & SDS SETS

A traditional keyed chuck that fits drills with 3/8” shaft, sold with a key. Suitable for 1.5mm – 10mm drills bits.

Product Code

Capacity (mm/mount)

Sets C10

A keyless hand-tightened three jaw chuck that fits drills with ½” shaft. Ideal for impact drills up to 750 watt. Sold with an SDS plus adaptor. Suitable for 1.5mm – 13mm drills bits.

Product Code

Capacity (mm/mount)

Sets 1.5 - 10mm, 3/8” x 24F

KKEY

1.5 - 13mm, 1/2” x 20F

Chucks continue on next page... 131


CHUCKS & KEYS

DRILLING

1/2” CHUCK, KEY & SDS SETS

HEAVY DUTY KEYLESS CHUCK

A traditional keyed chuck that fits drills with ½” shaft, sold with a key. Suitable for 1.5mm – 13mm drills bits.

A keyless hand-tightened three jaw chuck that fits drills with ½” shaft. Ideal for impact drills up to 750 watt. Suitable for 1.5mm – 13mm drills bits.

* SDS plus adaptor only with KEY

Product Code

Capacity (mm/mount)

Product Code

1.5 - 13mm, 1/2” x 20F 1.5 - 13mm, 1/2” x 20F

HDKC13

Sets C13 KEY*

Capacity (mm/mount)

Singles

CHUCK KEYS

1.5 - 13mm, 1/2” x 20F

SDS PLUS ADAPTORS

A replacement key for the traditional ½” keyed chuck. Product Code

Capacity (mm/mount)

Product Code

To fit 1/2” keyed chuck

SDSCA

Singles AS2

Singles

SUPER HEAVY DUTY CHUCK

132

A keyless single hand-tightened three jaw chuck that fits drills with ½” shaft. Ideal for impact drills up to 750 watt. Suitable for 1.5mm – 13mm drills bits.

Capacity (mm/mount)

Product Code

1.5 - 13mm, 1/2” x 20F

SHKC13

Singles SHDKC

SDS plus to 1/2” x 20M

SINGLE HANDED KEYLESS CHUCK

A keyless heavy duty handtightened three jaw chuck that fits drills with ½” shaft. Ideal for impact drills up to 1000 watt. Suitable for 1.5mm – 13mm drills bits.

Product Code

Capacity (mm/mount)

Capacity (mm/mount)

Singles 1.5 - 13mm, 1/2” x 20F


DRILL SETS

DRILLING

HSS BRAD POINT DRILL SET Product Code

Drill Ø (mm)

Working L (mm)

Total L (mm)

Qty

B15SET

3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 8.0 10.0

37 45 45 55 60 60 60 65 67 77 80

60 70 75 80 85 90 90 95 100 110 120

3 2 2 1 1 1 1 1 1 1 1

Product Code

Drill Ø (mm)

Working L (mm)

Total L (mm)

Qty

18 24 30 33 36 39 43 47 52 57 75 87

40 49 57 61 65 70 75 80 86 93 117 133

2 2 2 1 1 1 1 1 1 1 1 1

Bit Set - Qty 15

A 15 piece mixed selection of the most popular Brad Point wood drills. Sold in a robust weatherproof case.

HSS DRILL SET Bit Set - Qty 15

HSS15SET

A 15 piece mixed selection of the most popular HSS Ground Metal Drills with a 135° quick start split point. Sold in a robust weatherproof case.

1.5 2.0 2.5 3.0 3.2 3.5 4.0 4.5 5.0 6.0 8.0 10.0

FLAT WOOD BIT SETS Product Code

Drill Ø (mm)

Total L (mm)

Qty

10.0 12.0 16.0 19.0 22.0 25.0 32.0

152 152 152 152 152 152 152

1 1 1 1 1 1 1

Bit Set - Qty 7

F7SET

A selection of quick release flat wood drills. The quick release feature is designed to ensure a rapid change of bits making it ideal for multiple applications. Sold in a robust weatherproof case.

133


DRILLING

DRILL SETS

MASONRY DRILL SET Product Code

Drill Ø (mm)

Working L (mm)

Total L (mm)

Qty

45 50 50 60 60 75 75

75 85 85 100 100 120 120

1 2 3 2 3 2 2

Bit Set - Qty 15 4.0 5.0 5.5 6.0 7.0 8.0 10.0

M15SET

A mixed selection of 15 carbide tipped Masonry Drills. The range covers the most popular hole sizes for plastic plugs. Sold in a robust weatherproof case.

HSS & MASONRY DRILL SET

Product Code

Drill Ø Working Total (mm) L (mm) L (mm)

Drill Type

Qty

HSS HSS HSS HSS HSS HSS HSS HSS HSS HSS HSS HSS Masonry Masonry Masonry Masonry Masonry

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Bit Set - Qty 17

MIX17SET

A mixed selection of 12 HSS Ground Metal Drills with a 135° quick start split point and 5 carbide tipped Masonry Drills. Sold in a robust weatherproof case.

1.5 2.0 2.5 3.0 3.2 3.5 4.0 4.5 4.8 5.0 5.5 6.0 5.0 5.5 6.0 7.0 10

18 24 30 33 36 39 43 47 55 55 60 65 50 50 60 60 75

40 49 57 61 65 70 75 80 85 86 93 93 85 85 100 100 120

CARPENTERS KIT

(SPEED AUGERS & FLAT WOOD BITS) Short length drill ideal for drilling in-between timber joists and studding when first fixing pipes and cables. Contains three four flute speed augers for rapid chip ejection and cleaner drilling and two flat bits for larger holes. Sold with a ¼ hex quick change shank. Ideal for use with an impact driver to further reduce overall tool and drill working length.

134

Product Drill Ø Code (mm)

Total L (mm)

Drill Type

Qty

159 159 159 152 152

4 Cutter Speed Auger 4 Cutter Speed Auger 4 Cutter Speed Auger Flat Wood Bit Flat Wood Bit

3 2 2 1 1

Bit Set - Qty 5 CKIT

16.0 20.0 25.0 32.0 40.0


CUTTING 136 - HOLESAWS 136 - HOLESAW ACCESSORIES 138 - HOLESAW KITS 139 - DRY DIAMOND CORE BITS 140 - DIAMOND CORE ACCESSORIES 141 - DIAMOND BLADES 142 - CERAMIC BLADES

142 - MORTAR RAKING BLADES 143 - CUP GRINDING WHEELS 143 - BONDED ABRASIVE DISCS 144 - JIGSAW BLADES 151 - RECIPROCATING SAW BLADES 155 - CIRCULAR SAW BLADES 157 - MULTI-TOOL BLADES


HOLESAWS

CUTTING

HOLESAWS - VARIABLE PITCH

Materials

Variable Pitch

A variable pitch tooth pattern which clears dust more efficiently and gives superior cutting performance in wood, plastic, non-ferrous metals and man-made boards. High quality M3 grade HSS steel cutting edge and compatible with most makes of arbor. Holesaw Kits available on page 130 Product Code

Threaded Saw Ø (mm) Mount (inch)

Product Code

Arbor to Suit

Singles HS14 HS16 HS17 HS19 HS20 HS21 HS22 HS24 HS25 HS27 HS29 HS30 HS32 HS35 HS37 HS38 HS40 HS41 HS43 HS44 HS46 HS48 HS51 HS52 HS54

Threaded Saw Ø (mm) Mount (inch)

Arbor to Suit

Singles 14.0 16.0 17.0 19.0 20.0 21.0 22.0 24.0 25.0 27.0 29.0 30.0 32.0 35.0 37.0 38.0 40.0 41.0 43.0 44.0 46.0 48.0 51.0 52.0 54.0

1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18

AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2

HS57 HS60 HS64 HS65 HS67 HS68 HS70 HS73 HS76 HS79 HS83 HS86 HS89 HS92 HS95 HS98 HS102 HS105 HS108 HS111 HS114 HS121 HS127 HS140 HS152

57.0 60.0 64.0 65.0 67.0 68.0 70.0 73.0 76.0 79.0 83.0 86.0 89.0 92.0 95.0 98.0 102.0 105.0 108.0 111.0 114.0 121.0 127.0 140.0 152.0

1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18

AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2

ARBORS

Product Code

For Holesaw Dia. (mm)

Shank

Thread Shank

14-30 14-30 32-210 14-30 32-210

Hex 9.5 Hex 11 Hex 11 SDS Plus SDS Plus

1/2” x 20 1/2” x 20 5/8” - 18 1/2” x 20 5/8” - 18

Singles

AA4

136

AA1

AA2

SDSA1

SDSA2

AA4 AA1 AA2 SDSA1 SDSA2


HOLESAWS

CUTTING

HOLESAWS - CONSTANT PITCH

Materials

Constant Pitch

A constant pitch tooth pattern ensures smooth cutting and less “chatter” when drilling metal, particularly thin sheet. High quality M42 grade 8% Cobalt HSS steel cutting edge and compatible with most makes of arbor. Holesaw Kits available on page 130

Product Code

Threaded Saw Ø (mm) Mount (inch)

Arbor to Suit

Product Code

AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2

HSC51 HSC60 HSC64 HSC68 HSC70 HSC76 HSC79 HSC86 HSC89 HSC95 HSC102 HSC108 HSC111 HSC160 HSC165 HSC210

Singles HSC14 HSC16 HSC17 HSC20 HSC22 HSC25 HSC27 HSC30 HSC32 HSC35 HSC37 HSC40 HSC43 HSC46 HSC48

Threaded Saw Ø (mm) Mount (inch)

Arbor to Suit

Singles 14.0 16.0 17.0 20.0 22.0 25.0 27.0 30.0 32.0 35.0 37.0 40.0 43.0 46.0 48.0

1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18

51.0 60.0 64.0 68.0 70.0 76.0 79.0 86.0 89.0 95.0 102.0 108.0 111.0 160.0 165.0 210.0

5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18

AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2

PILOT DRILLS & EXTENSION RODS HPD HPDL HPDC HSE

Product Code

Description

Length (mm)

HSS Pilot drill HSS Long pilot drill HSS Cobalt drill Extension rod for AA2 (arbor)

75 105 75 300

Singles HPD HPDL HPDC HSE

137


CUTTING

HOLESAW KITS

HOLESAW KIT (PLUMBERS) A mixed selection of 8 HSS M3 variable pitch holesaws and arbors. The range covers the most popular hole sizes to accommodate metric pipes. Product Code

Size (mm)

KIT

HSKITPL

17.0 24.0 30.0 34.0 43.0 52.0 14-30 32-210

Product Contents of Kit Holesaw Holesaw Holesaw Holesaw Holesaw Holesaw Arbor (AA1) Arbor (AA2)

Kit Qty

1 1 1 1 1 1 1 1

HOLESAW KIT (ELECTRICIAN) A mixed selection of 9 HSS M3 variable pitch holesaws and arbors. The range covers the most popular hole sizes used when installing down-lights, conduit and wiring. Product Code

Size (mm)

KIT

HSKITEL

22.0 27.0 38.0 56.0 67.0 72.0 76.0 14-30 32-210

Product Contents of Kit Holesaw Holesaw Holesaw Holesaw Holesaw Holesaw Holesaw Arbor (AA1) Arbor (AA2)

Kit Qty

1 1 1 1 1 1 1 1 1

HOLESAW KIT (HANDY MAN) A mixed selection of 10 HSS M3 variable pitch holesaws and arbors. The range covers the most popular holesaw sizes. Product Code

Size (mm)

KIT

HSKITHA

138

17.0 20.0 25.0 30.0 38.0 43.0 52.0 72.0 14-30 32-210

Product Contents of Kit Holesaw Holesaw Holesaw Holesaw Holesaw Holesaw Holesaw Holesaw Arbor (AA1) Arbor (AA2)

Kit Qty

1 1 1 1 1 1 1 1 1 1


DRY DIAMOND CORE BITS & KIT

DRY DIAMOND CORE BITS

CUTTING Materials

Manufactured using laser-welded technology, these cores have been specifically designed to drill large clean holes in masonry and concrete block. FOR ROTARY USE ONLY.

Product Code

Drill Ø (mm)

Length

Height

(mm)

(mm)

22 28 32 38 48 52 65 78 82 91 107 117 127 152

300 300 150 150 150 150 150 150 150 150 150 150 150 150

10 10 10 10 10 10 10 10 10 10 10 10 10 10

Singles GPCP22300 GPCP28300 GPCP32150 GPCP38150 GPCP48150 GPCP52150 GPCP65150 GPCP78150 GPCP82150 GPCP91150 GPCP107150 GPCP117150 GPCP127150 GPCP152150

DIAMOND CORE KIT Five of the most popular sizes with all the accessories required in a aluminium case. NOTE: Ideally suited to lightweight building materials up to 10n/mm2. Product Code

Drill / To Fit (mm)

KIT

PDCK5

38 52 65 117 127 1/2” BSP 1/2” BSP 1/2” BSP 8 8

Length (mm)

Description

Contents of Kit 150 Diamond Core 150 Diamond Core 150 Diamond Core 150 Diamond Core 150 Diamond Core 240 Extension 88 Hex Adaptor 115 SDS Adaptor 200 Pilot Drill 75 Taper Drift

Kit Qty

1 1 1 1 1 1 1 1 1

139


DRY DIAMOND CORE ACCESSORIES

CUTTING

DRY DIAMOND CORE ACCESSORIES BSP EXTENSION Product Code

Overall Length

Fit

(mm)

Singles

An ½” BSP thread extension rod used where there is need for a deeper hole.

DCE240P

HEX ADAPTOR

SDS ADAPTOR

An ½” Hex with ½” BSP (male) thread, for use with a standard core drill. Available in 88mm and 240mm lengths.

An SDS Plus with ½” BSP (male) thread, for use with an SDS-Plus drill, when in rotary mode only. Available in 115mm and 240mm lengths.

Product Code

Product Code

Overall Length (mm)

Fit

88 240

1/2” BSP 1/2” BSP

Singles

240

1/2” BSP

Overall Length (mm)

Fit

115 240

1/2” BSP 1/2” BSP

Singles

DCAH88P DCAH240P

DCAS115P DCAS240P

PILOT DRILL

PILOT ROD

Morse taper TCT masonry drill bit used to prevent the core drifting.

Morse taper rod used once a hole has been drilled to prevent the core drifting.

Product Code

Product Code

Drill Ø (mm)

Length (mm)

Singles DCPD13210

Ø (mm)

Length (mm)

Singles 13

210

DCPR225

12

225

TAPER DRIFT Product Code

Used for knocking morse taper tools out of spindles and sockets.

140

Ø (mm)

Length (mm)

Singles DCTD

8

75


DIAMOND BLADES

CUTTING

MULTI-PURPOSE BLADES Materials

CHIMAERA

PREMIUM LASER WELDED BLADE

A high quality multi-material blade designed for cutting construction materials. Continuous rim turbo segmented blade for smooth cutting of construction material and reinforced concrete.

A premium quality laser welded, turbo segmented blade. For use in building materials such as concrete, common bricks, paving slabs, kerbs, lintels, clay roof tiles and natural stone.

Product Code

Bore Segment (mm) Height (mm)

Product Code

22.2 22.2 22.2 20.0 22.2 20.0 25.4

GPPL115222 GPPL125222 GPPL230222 GPPL30020 GPPL300222 GPPL35020 GPPL350254 GPPL450254

Disc Ø Disc (mm) (inch)

Singles MM115222 MM125222 MM230222 MM30020 MM300222 MM35020 MM350254

Disc. Ø Disc (mm) (inch)

Bore Segment (mm) Height (mm)

Singles 115 125 230 300 300 350 350

4 1/2 5 9 12 12 14 14

10 10 10 10 10 10 10

115 125 230 300 300 350 350 450

4 1/2 5 9 12 12 14 14 18

22.2 22.2 22.2 20.0 22.2 20.0 25.4 25.4

12 12 12 12 12 12 12 12

LASER WELDED BLADE

SINTERED BLADE

A cost effective laser welded blade with longer life than the sintered blades. For use in medium density building materials such as concrete, common bricks, paving slabs, kerbs, lintels, clay roof tiles and natural stone.

An economic product for cutting medium density building materials such as common bricks, paving slabs, kerbs and lintels.

Product Code

Bore Segment (mm) Height (mm)

Product Code

22.2 22.2 22.2 20.0

GPE115222 GPE230222 GPE30020

Disc. Ø Disc (mm) (inch)

Singles GPL115222 GPL125222 GPL230222 GPL30020

Disc. Ø Disc (mm) (inch)

Bore Segment (mm) Height (mm)

Singles 115 125 230 300

41/2 5 9 12

10 10 10 10

115 230 300

41/2 9 12

22.2 22.2 20.0

7 7 7

141


DIAMOND BLADES

CUTTING

CERAMIC BLADES

Materials

For use with angle grinders and portable tile cutting machines. Suitable for cutting ceramic tiles, marble, porcelain and natural stone. Can be used wet or dry.

THIN TURBO

SINTERED

A top quality blade for cutting porcelain, ceramics and marble. Continuous turbo design for minimal chipping of the material, while the special thin body reduces resistance and increases speed of cut.

A cost effective blade for cutting porcelain, ceramics and marble. Continuous rim for minimal chipping of the material

Product Code

Bore Segment (mm) Height (mm)

Product Code

22.2

TE10016 TE115222

Disc. Ø Disc (mm) (inch)

Singles TP115222

Disc. Ø Disc (mm) (inch)

Bore Segment (mm) Height (mm)

Singles 115

4 1/2

10

100 115

MORTAR RAKING BLADES

4 4 1/2

16.0 22.2

5 5

Materials

A product for raking mortar from between bricks prior to re-pointing.

SILVER BRAZED

SINTERED

A top quality product with 10mm silver brazed segments for a long service life.

An economic product with 7mm sintered segments.

Product Code

Bore Segment (mm) Height (mm)

Product Code

22.2 22.2

MRE115 MRE125

Disc. Ø Disc (mm) (inch)

Singles MRP115 MRP125

142

Disc. Ø Disc (mm) (inch)

Bore Segment (mm) Height (mm)

Singles 115 125

4 1/2 5

10 10

115 125

4 1/2 5

22.2 22.2

7 7


GRINDING WHEEL & ABRASIVE DISC

CUTTING

CUP GRINDING WHEEL

Materials

A double row, silver brazed wheel for smoothing and removing shutter marks from medium density concrete. Product Code

Disc. Ø Disc (mm) (inch)

Bore Segment (mm) Height (mm)

Singles CGDE115

115

4 1/2

22.2

10

BONDED ABRASIVE DISC

Materials

Used for cutting or grinding various types of metals. 1.0mm & 1.9mm are ideal for cutting stainless steel.

FOR CUTTING Product Code

Disc. Ø (mm)

FOR GRINDING Bore Thickness (mm) (mm)

Max RPM

Singles FCM115222 FCM230222 FCM30020 FCMT115222 FCMT125222 FCMT230222

Product Code

Disc. Ø (mm)

Bore Thickness (mm) (mm)

Max RPM

Singles 115 230 300 115 125 230

22.2 22.2 20.0 22.2 22.2 22.2

2.5 3.2 3.2 1.0 1.0 1.9

13,300 6,500 5,000 13,300 12,200 6,500

DGM11522

115

22.2

6.4

13,300

143


JIGSAW BLADES

CUTTING

HIGH CARBON STEEL BLADES FOR WOOD & PLASTIC High quality carbon steel for use with softer materials, such as hard and soft wood, plastics and laminated boards.

SOLD IN PACKS OF 5

MWS - MILLED & WAVY SET TEETH An economic blade to give a fine, clean, straight cut. SOFTWOOD

PLASTIC

MWS

CLEAN

STRAIGHT CUT BLADE (BOSCH EQUIV. - T119B)

Product Code

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

2

13

50

76

7.8

1.00

2.0 - 15.0

Pack of 5 AHW12

CURVE CUT BLADE (BOSCH EQUIV. - T119BO) These blades have a reduced blade depth to allow them to perform curved cuts more easily.

Product Code

CURVED

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

1.35

19

50

76.5

4.5

1.25

1.5 - 15.0

Pack of 5 AHW12K

MSS - MILLED & SIDE SET TEETH An economic blade to give a coarse cut into softwood and plastic. SOFTWOOD

STRAIGHT CUT BLADE (BOSC

Product Code

PLASTIC

MSS

COARSE

H EQUIV. - T111C)

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

3

8.5

75

100

9.8

1.27

4.0 - 50.0

Pack of 5 AHG13

144


JIGSAW BLADES

CUTTING

SSS - SIDE SET & SHARPENED An economic blade to give a quick, coarse cut into wood SOFTWOOD

PLASTIC

SSS

COARSE

STRAIGHT CUT BLADE (BOSCH EQUIV. - T144D)

Product Code

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

4

6.35

75

100

7.8

1.27

5.0 - 50.0

Pack of 5 AHGS14

CURVE CUT BLADE (BOSCH EQUIV. - T244D) These blades have a reduced blade depth to allow them to perform curved cuts more easily.

Product Code

CURVED

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

4

6.35

75

100

6.5

1.27

5.0 - 50.0

Pack of 5 AHGS24

GTG - GROUND & TAPER GROUND TEETH An economic blade to give a clean cut in both wood and plastic. SOFTWOOD

PLASTIC

GTG

CLEAN

STRAIGHT CUT BLADE (BOSCH EQUIV. - T101D)

Product Code

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

4

6.35

75

100

7.8

1.45

10.0 - 45.0

Pack of 5 AHC14

STRAIGHT CUT BLADE (BOSCH EQUIV. - T101B)

Product Code

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

2.5

10

75

100

7.8

1.45

3.0 - 30.0

Pack of 5 AHC12

145


JIGSAW BLADES

CUTTING

GTG - GROUND & TAPER GROUND TEETH An economic blade to give a clean cut in both wood and plastic.. SOFTWOOD

PLASTIC

GTG

PRECISION CUT BLADE (BOSCH EQUIV. - T101DP) This blade is made from a thicker plate to help achieve a 900 cut. It also makes this blade ideal for hardwood.

Product Code

CLEAN

HARDWOOD

PRECISION

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

4

6.35

75

100

7.8

1.68

10.0 - 45.0

Pack of 5 AHC14D

CURVE CUT BLADE (BOSCH EQUIV. - T101AO) These blades have a reduced blade depth to allow them to perform curved cuts more easily.

Product Code

LAMINATED

CURVED

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

1.35

19

50

76

4.5

1.25

1.5 - 15.0

Pack of 5 AHC12K

DOWN CUT BLADE (BOSCH EQUIV. - T101BR) Reversed teeth to cut on the down-stroke. This prevents the splintering of decorative surfaces such as kitchen worktops.

Product Code

LAMINATED

DOWN

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

2.5 2.5

10 10

75 105

100 132

7.8 7.8

1.45 1.45

3.0 - 30.0 3.0 - 65.0

Pack of 5 AHC12R AHC32R

146


JIGSAW BLADES

CUTTING

PREMIUM BI-METAL BLADES

FOR WOOD & PLASTIC

Combining the flexibility of a high carbon steel body with a HSS hardened cutting edge, resulting SOLD IN in a tough, shatter resistant blade PACKS OF which keeps its edge. Longer 5 service life leads to greater cost effectiveness per blade.

SSS - SIDE SET & SHARPENED A premium blade to give a quick, coarse cut into wood. ALL WOOD

PLASTIC

SSS

COARSE

STRAIGHT CUT BLADE (BOSCH EQUIV. - T144DF)

Product Code

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

4

6.35

75

100

7.8

1.27

5.0 - 50.0

Pack of 5 AHGS14BI

GTG - GROUND & TAPER GROUND TEETH A premium quality blade to give a clean cut in both wood and plastic.

ALL WOOD

PLASTIC

GTG

CLEAN

STRAIGHT CUT BLADE (BOSCH EQUIV. - T101BF)

Product Code

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

2.5

10

75

100

7.8

1.27

3.0 - 30.0

Pack of 5 AHC12BI

DOWN CUT BLADE (BOSCH EQUIV. - T101BRF) Reversed teeth to cut on the down-stroke. This prevents the splintering of decorative surfaces such as kitchen worktops.

Product Code

LAMINATED

DOWN

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

2.5

10

75

100

7.8

1.27

3.0 - 30.0

Pack of 5 AHC12RBI

147


JIGSAW BLADES

CUTTING

HIGH CARBON STEEL BLADES

FOR METAL & PLASTIC

SOLD IN PACKS OF 5

Hardened high speed steel designed to cut hard materials such as mild steel, aluminium and other non-ferrous metals.

MWS - MILLED & WAVY SET TEETH An economic blade to give a fine, clean, straight cut. NON-FERROUS ALUMINIUM

MWS

STRAIGHT CUT BLADE (BOSCH EQUIV. - T118B)

Product Code

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

2

13

50

76

7.8

1

2.5 - 6.0

Pack of 5 AMG12

STRAIGHT CUT BLADE (BOSCH EQUIV. - T318B)

Product Code

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

1.8

14

105

132

9.8

1

2.5 - 6.0

Pack of 5 AMG32

MSS - MILLED & SIDE SET TEETH An economic blade to give a fine cut. PLASTIC

NON-FERROUS ALUMINIUM

STEEL

MSS

STRAIGHT FINE CUT BLADE (BOSCH EQUIV. - T127D)

Product Code

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

3

8.50

75

100

7.8

1

3.0 -15.0

Pack of 5 AK14

CURVE FINE CUT BLADE (BOSCH EQUIV. - T227D) These blades have a reduced blade depth to allow them to perform curved cuts more easily.

Product Code

CURVED

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

3

8.50

75

100

6.5

1

3.0 -15.0

Pack of 5 AK24

148


JIGSAW BLADES

CUTTING

MWS - MILLED & WAVY SET TEETH FINE CUT BLADES An economic blade to give a fine, clean, straight cut.

SHEET

STEEL

MWS

STRAIGHT EXTRA FINE CUT BLADE (BOSCH EQUIV. - T118G) Extra fine cut enables this blade to cut very thin gauge sheet metal.

Product Code

SHEET METAL ONLY

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

0.7

36

50

76

7.8

1.0

0.5 - 1.5

Pack of 5 AMG107

STRAIGHT FINE CUT BLADE

SANDWICH

(BOSCH EQUIV. - T318A) Long blade to cut sandwich material up to 80mm

Product Code

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

1

25

105

132

9.8

1

1.0 - 3.0

Pack of 5 AMG31

STRAIGHT FINE CUT BLADE

SANDWICH

(BOSCH EQUIV. - T118A)

Product Code

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

1.2

21

50

76

7.8

1

1.2 - 3.0

Pack of 5 AMG11

CURVE FINE CUT BLADE (BOSCH EQUIV. - T218A) These blades have a reduced blade depth to allow them to perform curved cuts more easily.

Product Code

CURVED

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

1.2

21

50

76

6.4

1

1.2 - 2.0

Pack of 5 AMG21

149


JIGSAW BLADES

CUTTING

PREMIUM BI-METAL BLADES

FOR METAL & PLASTIC

SOLD IN PACKS OF 5

Combining the flexibility of a high carbon steel body with a HSS hardened cutting edge, resulting in a tough, shatter resistant blade which keeps its edge. Longer service life leads to greater cost effectiveness per blade.

MWS - MILLED & WAVY SET TEETH A premium quality blade to give a fine, clean, straight cut. STEEL

NON-FERROUS

INOX

MWS

STRAIGHT CUT BLADE (BOSCH EQUIV. - T118BF)

Product Code

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

2

13

55

76.5

7.8

1

2.5 - 6.0

Pack of 5 AMG12BI

STRAIGHT CUT BLADE (BOSC H EQUIV. - T118AF)

Product Code

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

1.2

21

50

76

7.8

1

1.2 - 2.0

Pack of 5 AMG11BI

150


RECIPROCATING SAW BLADES

CUTTING

HIGH CARBON STEEL RECIPROCATING SAW BLADES

SOLD IN PACKS OF 5

High quality carbon steel for use with softer materials, such as hard and soft wood, plastics and laminated boards.

SSS - SIDE SET & SHARPENED An economic blade to give a quick, coarse cut into wood and plastic. SOFTWOOD

PLASTIC

SSS

COARSE

STRAIGHT CUT BLADE (BOSCH EQUIV. - S644D)

Product Code

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

4.2

6

130

150

19

1.27

6.0 - 100

Pack of 5 A3021-150

SSS - SIDE SET & SHARPENED An economic blade to give a quick, coarse cut into wood. GREENWOOD

SSS

COARSE

STRAIGHT CUT BLADE (BOSCH EQUIV. - S1531L)

Product Code

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

6.35

4-5

220

240

19

1.27

190

Pack of 5 A3029-240

WAVEY CUT A quick straight smooth cut. RUBBER

CARPET

STRAIGHT CUT BLADE (BOSCH EQUIV. - 2313AW)

Product Code

LEATHER

SOLD IN PACKS OF 3

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

-

-

280

300

19

1.27

250

Pack of 3 ARWM300

151


RECIPROCATING SAW BLADES

CUTTING

BI - METAL RECIPROCATING SAW BLADES

FOR CUTTING WOOD & PLASTIC

SOLD IN PACKS OF 5

MSS - MILLED & SIDE SET TEETH A premium blade to give a quick, coarse cut into wood and plasitc. SOFTWOOD

PLASTIC

MSS

COARSE

STRAIGHT CUT BLADE (BOSCH EQUIV. - S1411DF)

Product Code

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

4.2

6

280

300

19

1.27

250

Pack of 5 A3021-300BI

FOR CUTTING METAL MSS - MILLED & SIDE SET TEETH A premium blade to give a quick, coarse cut. NON-FERROUS

STEEL

INOX

MSS

STRAIGHT CUT BLADE (BOSCH EQUIV. - S922BF)

Product Code

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

2.5

10

260

280

19

0.9

3.0 - 5.0

Pack of 5 A3018-280

152


RECIPROCATING SAW BLADES

CUTTING

BI - METAL RECIPROCATING SAW BLADES

FOR CUTTING METAL

SOLD IN PACKS OF 5

MWS - MILLED & WAVY SET TEETH A premium blade to give a fine, clean, straight cut.

STEEL

INOX

MSS

STRAIGHT CUT BLADE (BOSCH EQUIV. - S922BF)

NON-FERROUS

Product Code

Pitch (mm)

1.8

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

14

130

150

19

0.9

3.0 - 8.0

Pack of 5 A3013-150

STRAIGHT CUT BLADE (BOSCH EQUIV. - S1122BF)

NON-FERROUS

Product Code

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

1.8

14

180

225

19

0.9

3.0 - 8.0

Pack of 5 A3013-200

STRAIGHT CUT BLADE (BOSCH EQUIV. - S922AF)

SHEET METAL

Product Code

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

1

24

130

150

19

0.9

0.7 - 3.0

Pack of 5 A3015-150

STRAIGHT CUT BLADE (BOSCH EQUIV. - S1122AF)

SHEET METAL

Product Code

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

1

24

180

225

19

0.9

0.7 - 3.0

Pack of 5 A3015-200

153


RECIPROCATING SAW BLADES

CUTTING

BI - METAL RECIPROCATING SAW BLADES FOR CUTTING METAL

SOLD IN PACKS OF 5

MWS - MILLED & WAVY SET TEETH A premium blade to give a fine, clean, straight cut.

STEEL

INOX

MSS

STRAIGHT CUT BLADE (BOSCH EQUIV. - S922EF)

Product Code

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

1.4

18

130

150

19

0.9

1.5 - 4.0

Pack of 5 A3014-150

STRAIGHT CUT BLADE (BOSCH EQUIV. - S1122EF)

Product Code

Pitch (mm)

T.P.I

Working Length (mm)

Total Length (mm)

Height (mm)

Width (mm)

Cut Depth (mm)

1.4

18

180

225

19

0.9

1.5 - 4.0

Pack of 5 A3014-200

154


CIRCULAR SAW BLADES

CUTTING

BLADES FOR WOOD Professional quality blades made with high quality tungsten carbide tips to provide an excellent lifespan and a flawless finish. Available with different tooth configurations to provide multiple cut types in a variety of materials. ALL OUR BLADES CUT HARDWOOD, SOFTWOOD AND EXOTIC TIMBER.

COARSE / MEDIUM

MEDIUM

MEDIUM / FINE

EXTRA FINE

(GENERAL PURPOSE)

(COMBINATION)

(TRIMMING / CROSSCUT)

(FINE TRIM / FINISHING)

• Stone Fibre Board

• Plywood • Cement Bonded Board • Soft Fibre Board

• Veneers - Single & Double Sided • Plywood, Hardboard & MDF • Particle Board with Plastic Laminate On One Side

• Plywood • Cement Bonded Board • Soft Fibre Board

CIRCULAR SAW BLADES For use in corded and cordless circular saws with blade sizes 140mm to 315mm. Product Code

Blade Ø (mm)

Blade Ø (inch equiv.)

Kerf (mm)

Bore (mm)

No. of Teeth

Cut Type

Bushing Ring Size (mm)

140 150 150 160 160 165 184 184 184 184 184 190 190 210 216 216 216 216 230 230 235 235 235 250 250 250 254 254 254 260 260 300 300 300 315 315 315

5 1/2 6 6 61/4 61/4 61/2 71/4 71/4 71/4 71/4 71/4 71/2 71/2 81/4 81/2 81/2 81/2 81/2 9 9 91/4 91/4 91/4 10 equiv. 10 equiv. 10 equiv. 10 10 10 101/4 101/4 117/8 117/8 117/8 123/8 123/8 123/8

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3

20 20 20 30 30 30 16 30 16 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30

16 12 40 16 24 18 24 24 40 40 60 24 40 32 24 40 60 80 30 40 24 40 60 40 60 80 30 40 60 30 60 40 60 80 30 48 60

Coarse / Medium Coarse / Medium Medium / Fine Coarse / Medium Medium Medium Coarse / Medium Coarse / Medium Medium / Fine Medium / Fine Extra Fine Coarse / Medium Medium Coarse / Medium Coarse / Medium Medium / Fine Extra Fine Extra Fine Coarse / Medium Medium Coarse / Medium Coarse / Medium Medium / Fine Medium Medium / Fine Extra Fine Coarse / Medium Medium Medium / Fine Coarse / Medium Medium / Fine Medium Medium / Fine Medium / Fine Coarse / Medium Medium Medium / Fine

16.00 16.00 16 or 20 16 or 20 16 or 20 25.00 16 or 20 16 or 20 16 or 20 16,20 or 25.4 16,20 or 25.4 16,20 or 25.4 -

Singles C1402016 C1502012 C1502040 C1603016 C1603024 C1653018 C1841624 C1843024 C1841640 C1843040 C1843060 C1903024 C1903040 C2103032 C2163024 C2163040 C2163060 C2163080 C2303030 C2303040 C2353024 C2353040 C2353060 C2503040 C2503060 C2503080 C2543030 C2543040 C2543060 C2603030 C2603060 C3003040 C3003060 C3003080 C3153030 C3153048 C3153060

155


CIRCULAR SAW BLADES

CUTTING

CORDLESS TRIM SAW BLADES Designed for use with hand-held cordless circular saws, this range includes blades for use on all types of timber and man-made boards. Product Code

Blade Ø (mm)

Blade Ø (inch equiv.)

Kerf (mm)

Bore (mm)

No. of Teeth

Cut Type

136 150 165 165 165 190

53/8 6 61/2 61/2 61/2 71/2

1.6 1.6 1.6 1.6 1.6 1.6

10 10 10 20 10 30

24 24 24 24 40 24

Medium Medium Coarse / Medium Coarse / Medium Medium / Fine Coarse / Medium

Singles T1361024 T1501024 T1651024 T1652024 T1651040 T1903024

ZERO DEGREE MITRE SAW BLADES For use with most mitre saws, these blades have precision ground teeth to give a clean and smooth cut in all types of timber and man-made boards.

Product Code

Blade Ø (mm)

Blade Ø (inch equiv.)

Kerf (mm)

Bore (mm)

No. of Teeth

Cut Type

216 216 250 250

81/2 81/2 10 equiv. 10 equiv.

2.4 2.4 3 3

30 30 30 30

24 48 48 60

Coarse / Medium Medium / Fine Medium Medium / Fine

Singles Z2163024 Z2163048 Z2503048 Z2503060

BLADES FOR ALUMINIUM Professional quality blades made with high quality tungsten carbide tips to provide an excellent lifespan and a flawless finish. Available with different tooth configurations to provide multiple cut types in a variety of materials. A range of blades for sizes 216, 250 and 305mm diameters.

FINE

(ALUMINIUM / PLASTIC) • Thin Walled Extrusions • Panels Of Aluminium • Plastic

-5 DEGREE ALUMINIUM BLADES A range of blades for sizes 216, 250 and 305mm diameters. Product Code

Blade Ø (mm)

Blade Ø (inch equiv.)

Kerf (mm)

Bore (mm)

No. of Teeth

216 216 250 305 305 305

81/2 81/2 10 equiv. 12 12 12

2.4 2.4 2.4 3 3 3

30 30 30 30 30 30

60 80 80 48 60 80

Cut Type

Singles A2163060 A2163080 A2503080 A3053048 A3053060 A3053080

156

Fine Fine Fine Fine Fine Fine


MULTI-TOOL BLADES

CUTTING

TITANIUM COATED BI-METAL MULTI-TOOL BLADES

Materials

A high performance M42 bi-metal blade with a protective hardened titanium coat to improve performance and increase working life.

WOOD/METAL, RADIAL MULTI-TOOL BLADE

FLUSH CUT, WOOD/METAL MULTI-TOOL BLADE

Designed to cut hard/soft woods, ferrous and non-ferrous pipes, metal sheet and plastics. Also ideal for cutting laminated boards, parquet flooring and partition walls.

Ideal for a fine and straight cut into hard/softwoods, ferrous and non-ferrous pipes/sheet and plastics.

Product Code

Size Ø (mm)

Cutting Depth (mm)

Teeth Pitch

Product Code

87

26

1.3

MT32TN MT44TN

Singles MTR87TN

Size Ø (mm)

Cutting Depth (mm)

Teeth Pitch

32 44

54 54

1.4 1.4

Singles

BI-METAL MULTI-TOOL BLADES

Materials

A high performance M42 bi-metal blades.

WOOD/METAL, RADIAL MULTI-TOOL BLADE

FLUSH CUT, WOOD/METAL MULTI-TOOL BLADE

Designed to cut hard/soft woods, ferrous and non-ferrous pipes, metal sheet and plastics. Also ideal for cutting laminated boards, parquet flooring and partition walls.

Ideal for a fine and straight cut into hard/softwoods, ferrous and non-ferrous pipes/sheet and plastics.

Product Code

Size Ø (mm)

Cutting Depth (mm)

Product Code

87

26

MT32BI

Singles MTR87BI

Size Ø (mm)

Cutting Depth (mm)

Teeth Pitch

32

42

1.4

Singles

157


MULTI-TOOL BLADES

CUTTING

CARBON STEEL MULTI-TOOL BLADES

WOOD RADIAL MULTI-TOOL BLADE

FLUSH-CUT WOOD MULTI-TOOL BLADE

An economic blade with hardened teeth, designed to cut soft woods, plastics, plasterboard and other soft materials.

An economic blade with hardened teeth, designed for a fine, clean cut into hard/soft woods, plastics, plasterboard and soft materials.

Product Code

Size Ø (mm)

Cutting Depth (mm)

Singles MTR87

87

Product Code

Cutting Depth (mm)

Teeth Pitch

10 20

40 40

1.4 1.4

Singles MT10FT MT20FT

26

Size (mm)

FLUSH-CUT WOOD MULTI-TOOL BLADE

FLUSH-CUT WOOD MULTI-TOOL BLADE

An economic blade with hardened teeth, designed for a fine, clean cut into hard/soft woods, plastics, plasterboard and soft materials.

An economic blade with hardened teeth, designed for a fine, clean cut into hard/soft woods, plastics, plasterboard and soft materials.

Product Code

Size (mm)

Cutting Depth (mm)

Teeth Pitch

Product Code

32

42

1.4

MT69FT

Singles MT32FT

158

Materials

Size (mm)

Cutting Depth (mm)

Teeth Pitch

69

42

1.4

Singles


MULTI-TOOL BLADES

CUTTING

FAST-CUT WOOD MULTI-TOOL BLADE

FLUSH-CUT WOOD MULTI-TOOL BLADE

An economic blade with hardened teeth, designed to give a fast cut into soft woods, plastics, plasterboard.

An economic blade with hardened teeth, designed to give a fast rough cut into soft woods, plastics, plasterboard.

Product Code

Size (mm)

Cutting Depth (mm)

Teeth Pitch

Product Code

32

42

1.69

MT69CT

Singles MT32CT

Size (mm)

Cutting Depth (mm)

Teeth Pitch

69

42

1.69 V-Shape

Singles

SERRATED WAVY EDGE MULTI-TOOL SAW BLADE

SERRATED WAVY EDGE MULTI-TOOL SAW BLADE

An economic blade with hardened teeth, designed to give a fast rough cut into soft woods, plastics, plasterboard.

Ideal for many scraping applications such as removing paint, glues and silicone.

Materials

Materials

Product Code

Size (mm)

Cutting Depth (mm)

Product Code

69

42

MT52SC

Singles MT69SE

Size (mm)

Cutting Depth (mm)

52

35

Singles

159


MULTI-TOOL BLADES

CUTTING

CARBIDE GRIT, RADIAL MULTI-TOOL BLADE

DIAMOND BOOT MULTI-TOOL BLADE

Ideal for cutting tiles, porous concrete and plaster.

Designed to remove grout from in-between tiles. The boot design rapidly removes the grout without damaging the tiles.

Materials

Materials

CARBIDE GRIT

Product Code

Size Ø (mm)

Cutting Depth (mm)

Product Code

65

42

MTBOOT

Singles MT65CG

Size Ø (mm)

Singles 65

DELTA SANDING PAD

DELTA SANDING PAD

To be used in conjunction with the triangular sanding sheets for sanding wood, metal and plastics.

Universal use on most surfaces, the hook and loop backing makes it easy to remove from the sanding pad. Used in conjunction with the Multi-Tool Sanding Pad when working with wood, metal or plastic.

Materials

Materials

Product Code

Size Ø (mm)

Singles MT93SP

93

Product Code

Grit Range

Description

93 93 93 93 93

60 80 100 120 180

Coarse Medium Medium Medium Fine

Singles MTP60 MTP80 MTP100 MTP120 MTP180

160

Size (mm)


DRIVER BITS & ADAPTORS 162 - V5 IMPACT BITS 163 - S2 DRIVER BITS

164 - DRIVER BIT SETS 166 - ADAPTORS


V5 IMPACT DRIVER BITS

DRIVER BITS

V5 IMPACT DRIVER BITS Toughened for impact

V5 steel has been specifically designed to withstand the extreme pressures of an impact driver. These durable hardened and patented bits will extend the lifespan and gives optimum performance in all impact applications.

MIXED V5 DRIVER BIT SET

V5 PHILLIPS DRIVER BITS

Mixed selection of 50mm impact resistant driver bits, specifically designed for use with an impact driver. Product Code

Size

Length (mm)

Qty

Handy Packs 1PH25V5 2PH25V5 3PH25V5 2PH50V5 3PH50V5

PH1 PH2 PH3 PH2 PH3

25 25 25 50 50

10 10 10 5 5

Product Code

Size

Length (mm)

Type

Qty

Pozi Phillips IM T Drive TIM Drive

2 2 1 1

Set V5MIXSET

PZ2 PH2 T25 T30

50 50 50 50

V5 POZI DRIVER BIT SET

V5 POZI DRIVER BITS

Mixed selection of 50mm impact resistant driver bits, specifically designed for use with an impact driver. Product Code

Size

Length (mm)

Qty

Handy Packs 1CB25V5 2CB25V5 3CB25V5 1CB50V5 2CB50V5 3CB50V5

PZ1 PZ2 PZ3 PZ1 PZ2 PZ3

25 25 25 50 50 50

10 10 10 5 5 5

Product Code

Size

Length (mm)

Type

Qty

Pozi Pozi Pozi

1 3 2

Set PZ1 PZ2 PZ3

V5PZSET

V5 TIM DRIVE DRIVER BITS

50 50 50

V5 TIM DRIVE DRIVER BIT SET Mixed selection of 50mm impact resistant driver bits, specifically designed for use with an impact driver.

Product Code

Size

Length (mm)

Qty

Handy Packs 20TX25V5 25TX25V5 30TX25V5 40TX25V5 30TX50V5

162

T20 T25 T30 T40 T30

25 25 25 25 50

10 10 10 10 5

Product Code

Size

Length (mm)

Type

Qty

TIM Drive TIM Drive TIM Drive TIM Drive

1 2 2 1

Set V5TXSET

T15 T20 T25 T30

50 50 50 50


S2 DRIVER BITS

DRIVER BITS

S2 DRIVER BITS Hardened steel bits

S2 Steel is a premium quality alloy steel for exceptional strength and durability over the standard chrome vanadium driver bits.

PHILLIPS DRIVER BITS

Product Code

Size

Length (mm)

Qty

Handy Packs 1PH25PACK 2PH25PACK 3PH25PACK 2PH50PACK 3PH50PACK

Product Code

25 25 25 50 50

10 10 10 5 5

PH 2 PH 2 PH 2

100 150 300

1 1 1

1CB25PACK 2CB25PACK 3CB25PACK 4CB38PACK 1CB50PACK 2CB50PACK 3CB50PACK

Size

Length (mm)

Product Code

T10 T15 T20 T25 T30 T40 T30

25 25 25 25 25 25 50

10 10 10 10 10 10 5

Size

Length (mm)

Qty

5.5 x 0.8 6.0 x 1.0 7.0 x 1.2 10.0 x 1.6

25 25 25 25

PZ 1 PZ 2 PZ 3 PZ 4 PZ 1 PZ 2 PZ 3

25 25 25 38 50 50 50

10 10 10 10 5 5 5

PZ 2 PZ 2 PZ 2

100 150 300

1 1 1

Size

Length (mm)

Qty

Handy Packs 2SQ25PACK 2SQ50PACK

No.2 No.2

25 50

10 5

No.2

25

2

Twin Packs 2SQ25GB

HEX DRIVER BITS

Product Code

Size

Length (mm)

Qty

Twin Packs

Twin Packs 5508SL25GB 6010SL25GB 7012SL25GB 1016SL25GB

Qty

SQUARE DRIVER BITS

SLOTTED DRIVER BITS

Product Code

(mm)

Qty

Handy Packs 10TX25PACK 15TX25PACK 20TX25PACK 25TX25PACK 30TX25PACK 40TX25PACK 30TX50PACK

Length

Mini Bit Packs 2CB100GB 2CB150GB 2CB300GB

TIM DRIVE DRIVER BITS

Product Code

Size

Handy Packs PH 1 PH 2 PH 3 PH 2 PH 3

Mini Bit Packs 2PH100GB 2PH150GB 2PH300GB

POZI DRIVER BITS

2 2 2 2

3HX25GB 4HX25GB 5HX25GB 6HX25GB 8HX25GB

3.0 4.0 5.0 6.0 8.0

25 25 25 25 25

2 2 2 2 2

163


DRIVER BIT SETS

DRIVER BITS

DRIVER BIT SETS V5 IMPACT DRIVE BIT SET

31 PIECE S2 DRIVER BIT SET

Mixed selection of 25mm impact resistant driver bits and a magnetic adaptor, specifically designed for use with an impact driver. Product Code

Size

Length

Type

(mm)

Qty

Comprehensive 31 piece assorted case containing the most commonly used 25mm driver bits and a quick release adaptor. Convenient protective case with TPE (Rubber) corners and a handy belt clip. Product Code

Phillips Pozi Pozi Pozi IM T Drive IM T Drive TIM Drive TIM Drive

1 1 2 1 1 1 1 1 1 DBSETG31

24 PIECE S2 POUCH BIT SET A handy canvas pouch consisting of a mixed selection of the most popular 50mm driver bits with a quick release screw driver. Ideal for maintenance and repair.

Product Code

Size

Length (mm)

Type

Qty

Set - Qty 24

POUCHSET

164

PH1 PH2 PH3 PZ1 PZ2 PZ3 T15 T20 T25 T30 H3 H4 H5 1/4�

50 50 50 50 50 50 50 50 50 50 50 50 50 -

Phillips Phillips Phillips Pozi Pozi Pozi

1 3 1 1 3 1 IM T Drive 1 IM T Drive 2 TIM Drive 2 IM T Drive 2 Hex 1 Hex 1 Hex 1 Quick Release 1

Length (mm)

Type

Qty

Set - Qty 31

Set - Qty 10 PH2 25 PZ1 25 PZ2 25 PZ3 25 V5MEDSET T15 25 T20 25 T25 25 T30 25 Quick Release Adapter

Size

PZ1 25 Pozi PZ2 25 Pozi PZ3 25 Pozi Hex H4.0 25 Hex H5.0 25 Hex H6.0 25 Hex H7.0 25 3.5 25 Slotted 4.5 25 Slotted 5.0 25 Slotted 5.5 25 Slotted 8.0 25 Slotted T10 25 TIM Drive T15 25 TIM Drive T20 25 TIM Drive T25 25 TIM Drive T30 25 TIM Drive T40 25 TIM Drive PH1 25 Phillips PH2 25 Phillips PH3 25 Phillips 2.0 25 Square Quick Release Adapter

1 5 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 2 1 1


DRIVER BIT SETS

DRIVER BITS

DRIVER BIT SETS DRIVER BIT & HSS DRILL SET

MIXED DRIVER BIT SET

A selection of quick release HSS Ground Metal Drills, S2 driver bits, Socket Drivers and a Magnetic adaptor. The quick release feature is designed to ensure a rapid change of bits making it ideal for multiple applications. Sold in a robust weatherproof case.

A 37 piece mixed selection of the most popular 25mm and 50mm S2 driver bits with a magnetic adaptor and an assortment of socket drivers. Sold in a robust weatherproof case.

Product Code

Product Code

Size (mm)

Type

Qty

Bit Set - Qty 20

MIX20SET

1.5 2.0 3.0 3.5 4.0 4.5 5.0 6.0 PH1 PH2 PH3 PZ1 PZ2 PZ3 5.0 6.0 6.0 8.0 10.0 -

Size (mm)

Length (mm)

Type

Qty

Bit Set - Qty 37 HSS Drill Bit HSS Drill Bit HSS Drill Bit HSS Drill Bit HSS Drill Bit HSS Drill Bit HSS Drill Bit HSS Drill Bit Phillips Phillips Phillips Pozi Pozi Pozi Slotted Slotted Nut Driver Nut Driver Nut Driver Quick Changer

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

BIT37SET

4.0 4.5 5.5 6.0 6.5 7.0 PH1 PH2 PH3 PZ1 PZ2 PZ3 T10 T15 T20 T25 T27 T30 T40 3.0 4.0 5.0 5.5 6.0 PH1 PH2 PH3 PZ1 PZ2 PZ3 5.5 7.0 5 6 8 10

25 Slotted 25 Slotted 25 Slotted 25 Slotted 25 Slotted 25 Slotted 25 Phillips 25 Phillips 25 Phillips 25 Pozi 25 Pozi 25 Pozi IM 25 T Drive IM 25 T Drive 25 TIM Drive 25 TIM Drive 25 TIM Drive 25 TIM Drive 25 TIM Drive 25 Hex 25 Hex 25 Hex 25 Hex 25 Hex 50 Phillips 50 Phillips 50 Phillips 50 Pozi 50 Pozi 50 Pozi 50 Slotted 50 Slotted Nut Driver Nut Driver Nut Driver Nut Driver Magnetic Bit Holder

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

165


ADAPTERS

DRIVER BITS

SOCKET DRIVERS & ADAPTORS SOCKET DRIVERS

Product Code

Length

Size

(mm)

Type

Pack Qty

Mini Bit Packs Also known as a 1/4” Nut Setter. Used for installing hexagon headed fasteners with a power tool.

516SDB 635SDB 6SDB 10SDB 11BHSDB 13SDB

5/16” 1/4” 6mm 10mm 11mm 13mm

65 65 65 65 65 65

Hex Hex Hex Hex Bi-Hex Hex

1 1 1 1 1 1

5/16” 10mm

65 65

Hex Hex

20 20

Bit Packs 516SDJ 10SDJ

ONE PIECE ADAPTORS

TWO PIECE ADAPTORS

A magnetic 1/4” hex drive adaptor machined from a single piece of stainless steel to give extended life and durability. Available with or without a circlip to improve bit retention. Product Code

Length (mm)

Type

Qty

Circlip

1 1

Mini Bit Packs 60MASSB 60MASSCB

60 60

Quick Release An economic magnetic 1/4” hex drive adaptor manufactured from two pieces of carbon steel. Available with or without a circlip to improve bit retention or with a quick release collar.

REGULAR Product Code

Length

Type

Qty

60 60 150 300

Circlip Circlip Circlip

1 1 1 1

60 60

Circlip

20 20

Type

Pack Qty

60 150 300

Circlip Circlip Circlip

1 1 1

60

Circlip

20

(mm)

Mini Bit Packs

SDS ADAPTORS

60MAB 60MACB 150MACB 300MACB

Bit Packs A magnetic SDS Plus to 1/4” hex drive adaptor, ideal for converting your SDS-Plus drill in to a screwdriver when in rotary mode only. Product Code

Length (mm)

Type

Qty

1/4

1

Mini Bit Packs 80MASDSCB

60MAJ 60MACJ

QUICK RELEASE Product Code

Length (mm)

Mini Bit Packs 80

60MAQRB 150MAQRB 300MAQRB

Bit Packs 60MAQRJ

166


HAND TOOLS & ACCESSORIES 168 - KINIFE BLADES 169 - HACKSAW FRAMES 170 - HACKSAW BLADES

170 - TAPE MEASURE 171 - HAND WIRE BRUSHES


UTILITY KNIFE BLADES

HAND TOOLS & ACCESSORIES

KNIFE BLADES Longer Life Super Sharp

Durable

MANUFACTURED USING

SK2 STEEL

MORE CUTS

SK2 Steel gives a longer life and a sharper cut.

HOOKED KNIFE BLADES

UTILITY KNIFE BLADES

Sharpe point for penetrating and cutting sheet material in particular floor coverings and plastic sheeting. Manufactured using SK2 steel to give a longer life and a sharper cut. For general purpose cutting of linoleum, plastic, wood, carpet, cardboard etc.

Compatible with all standard utility knives. Manufactured using SK2 steel to give a longer life and a sharper cut. For general purpose cutting of linoleum, plastic, wood, carpet, cardboard etc.

Product Code

Blade Size

Qty

51 x 19 x 0.6

10

Pack HBDISP

SNAP OFF KNIFE BLADES 18mm

HD12HSF Product Code

9mm

Snap off blades for standard retractable knives. Multiple cutting edges for longer life. Manufactured using SK2 steel to give a longer life and a sharper cut. For general purpose cutting of linoleum, plastic, wood, carpet, cardboard etc. Product Code

Blade Size

Pack Qty

9 18

10 10

Packs UBSNAP9 UBSNAP18

168

UBHANG

UBCASE

Blade Size

Qty

60 x 90 x 0.6 60 x 90 x 0.6 60 x 90 x 0.6

10 50 100

Packaging HD12HSF UBHANG UBCASE


HACKSAW FRAMES

HAND TOOLS & ACCESSORIES

HACKSAW FRAMES

LARGE HACKSAW

LIGHTWEIGHT HACKSAW

A professional quality high tension hacksaw frame, with an ergonomic and comfortable TPR grip handle. The storage compartment in the frame includes four additional bi-metal blades with different teeth configuration for multiple cutting applications.

Toughened steel frame with an ergonomic rubber handle, includes one 24 TPI blade.

Product Code

Product Code

Blade Size (Imp.)

Singles

Blade Size (Imp.)

Singles

HD12HSF

12”

12HSF

12”

MINI HACKSAW

JUNIOR HACKSAW

Die-cast aluminium frame with a soft grip rubber handle. Ideal for difficult to reach areas. Will accept 250-300mm hacksaw blades. Supplied with one 300mm (12”) 24 TPI blade.

Die-cast aluminium frame with a soft grip rubber handle, includes one 24 TPI SK4 blade.

Product Code

Product Code

Blade Size (Imp.)

Singles 12MHSF

Blade Size (Imp.)

Singles 12”

6JHSF

6”

169


HAND TOOLS & ACCESSORIES

HACKSAW BLADES & TAPE MEASURE

HACKSAW BLADES

BI-METAL HACKSAW BLADES

Choose fine pitch (32T) for thinner materials, a coarser pitch (18T) for thicker steel. The teeth should point towards the front of the saw and cut on the push stroke. Ideally, at least three teeth should be in the material.

Product Code

Overall Length (mm)

Teeth Per Inch

Qty

300 300 300

18 24 32

5 5 5

Overall Length (mm)

Teeth Per Inch

Qty

150

24

5

Pack HSB18P5 HSB24P5 HSB32P5

JUNIOR HACKSAW BLADES

General purpose 150mm junior hacksaw blades with 24 teeth per inch and pinned ends for secure fitting. Ideal for plastic and metal pipe cutting. Fits all standard junior hacksaw frames.

Product Code

Pack SK4JB

TAPE MEASURE Ergonomic shock resistant easy grip rubber jacket for comfortable non-slip grip. A five meter super strength matt nylon coated steel blade with metric & inch measurements ideal for the professional user.

Product Code

Size (m x mm)

Singles TM5M

170

5 x 19


WOODEN HANDLE SCRATCH BRUSHES

HAND TOOLS & ACCESSORIES

WOODEN HANDLE SCRATCH BRUSHES Ideal for the professional user when preparing surfaces to remove paint, rust, scale, grout or dirt. (Stainless steel reduces contamination of the base material)

STEEL & STAINLESS STEEL

STEEL WITH SCRAPER

Product Code

Product Code

W L (mm) (mm)

No. of Rows

Material

3 x 18 4 x 18 3 x 16 4 x 16

Steel Steel Stainless Steel Stainless Steel

Singles 3SBHD 4SBHD 3SBSS 4SBSS

295 295 295 295

A moisture and chemical resistant ergonomic handle. Ideal for the professional user when preparing surfaces to remove paint, rust, scale, grout or dirt. W L (mm) (mm)

No. of Rows

Material

4 x 15 6 x 15

Steel Steel

Singles 4SBP 6SBP

No. of Rows

Material

4 x 18

Steel

Singles 28 33 28 33

PLASTIC HANDLE SCRATCH BRUSHES

Product Code

W L (mm) (mm)

4SSBHD

33

295

WIRE HAND BRUSHES

A high density wire brush with an ergonomic plastic handle. Ideal for a more aggressive removal of paint, rust, scale, grout or dirt. Sold in three brush types to suit a variety of applications. Product Code

L (mm)

Material

255 255 255

Steel Stainless Steel Brass

Singles 30 41

280 280

RWHB BWHB YWHB

FILE CLEANING BRUSH For cleaning embedded filings from both wood and metal files. Product Code

No. of Rows

Material

110 x 40

Steel

Singles FCB

171


PROTECTION & ADHESIVES 173 - HEAVY DUTY CLOTH TAPE 173 - CLOTH TAPE 173 - PVC BUILDERS TAPE 173 - DOUBLE SIDED CLOTH TAPE 174 - MASKING TAPE 174 - PACKAGING TAPE 174 - ALUMINIUM FOIL TAPE

174 - PVC TAPES 175 - ANTI-SLIP TAPE 175 - HAZARD TAPE 175 - BARRIER TAPE 176 - SHIELD PROTECTIVE FILMS 176 - SHIELD BUILDERS WIPES 177 - SHIELD DUST SHEETS


TAPES

PROTECTION & ADHESIVES

HEAVY DUTY CLOTH TAPE

DOUBLE SIDED CLOTH TAPE

Available in:

Available in:

Black

Silver

White

A super-strength tape. Water resistant and extremely durable, this industrial quality tape is designed to be used in multiple indoor and outdoor applications.

Product Code

Length

Width

(m)

(mm)

50 50 50

50 50 50

Colour

Qty

Black Silver White

1 1 1

Packs HDCTBLACK HDCTSILVER HDCTWHITE

Product Code

Length

Width

(m)

(mm)

25

50

Colour

Qty

White

1

Packs

CLOTH TAPE Available in:

White

A strong double sided cloth tape designed to stick two surfaces together where an invisible joint is required. Ideal for fixing carpets, signs and protective sheeting to multiple surfaces.

Black

Silver

White

A medium quality cloth tape used to repair, fasten, bundle, strengthen, mark, plus much more.

DSCT

HIGH STRENGTH PVC BUILDERS TAPE Available in:

Black

A strong versatile PVC tape used for jointing PVC and polythene sheets and membranes. Frequently used for sealing contamination barriers, polythene dust sheets, silage covers and bales.

Product Code

Length

Width

(m)

(mm)

50 50 50

48 48 48

Colour

Qty

Black Silver White

1 1 1

Packs CTBLACK CTSILVER CTWHITE

Product Code

Length

Width

(m)

(mm)

33

75

Colour

Qty

Black

1

Packs HSBT

173


TAPES

PROTECTION & ADHESIVES

PACKAGING TAPE

3 DAY MASKING TAPE

Available in:

Available in:

Clear

Brown

A quality tape giving you an instant and secure fixture, ideal for sealing boxes, attaching labels and general packing applications.

Product Code

Length

Width

(m)

(mm)

50 50

48 48

Colour

Qty

Clear Brown

3 3

Packs PTC PTB

Product Code

Length

Width

(m)

(mm)

50 50 50

25 38 50

Colour

Qty

Cream Cream Cream

1 1 1

Packs MT25 MT38 MT50

ALUMINIUM FOIL TAPE

PVC INSULATION TAPE

Available in:

Available in:

Silver

Red

Used in jobs requiring moisture and chemical resistance, thermal conductivity, flame resistance, heat and light reflectance and is weather resistant. Perfect for joining foil covered insulation, sealing off pipes and ducts.

Product Code

Length

Width

(m)

(mm)

45 45 45

50 75 100

Colour

Qty

Silver Silver Silver

1 1 1

Packs AFT50 AFT75 AFT100

174

Cream

A general purpose masking tape for professional results. Designed to be easily removed for up to three days without leaving residue or damaging the surface.

Brown

White

Black Blue

Green

Grey Yellow

Yellow Green

Ideal for insulating electrical wires and joints. Easily torn by hand, can be written on and cleanly removed from smooth surfaces. Product Code

Length

Width

(m)

(mm)

25 25 25 25 25 25 25 25 25

18 18 18 18 18 18 18 18 18

Colour

Qty

Black White Grey Red Blue Green Yellow Brown Green/Yellow

10 10 10 10 10 10 10 10 10

Packs ITBLACK ITWHITE ITGREY ITRED ITBLUE ITGREEN ITYELLOW ITBROWN ITGYSTRIPE


TAPES

BARRIER TAPE Available in:

Red White

ANTI-SLIP TAPE Available in:

Black Yellow

A durable non-adhesive polythene barrier tape, ideal for marking out hazardous areas. Can be used internally and externally. Available in 100 & 500 metre rolls. The 500m comes in a convenient dispensing box for easy storage and application

Product Code

Length

Width

(m)

(mm)

Colour

Qty

Red/White Yellow/Black Red/White Yellow/Black

1 1 1 1

Packs / Boxed* BART

Black Yellow

Black

Manufactured using a high grade P60 grit to offer excellent grip, commonly used where there is risk of slip hazards such as stairs, shop fronts, ramps and paths etc. Three layers of Acrylic Solvent glue gives excellent adhesion to multiple surfaces.

Product Code

Length

Width

(m)

(mm)

10 10

50 50

Colour

Qty

Black/Yellow Black

1 1

Packs

100 100 500 500

BARTYB BART500* BARTYB500*

PROTECTION & ADHESIVES

70 70 70 70

ASTSTRIPE ASTBLACK

HAZARD TAPE Available in:

Black Yellow

A durable self adhesive PVC hazard tape, ideal for marking floors, walls and hazardous areas. Can be used internally and externally.

Product Code

Length

Width

(m)

(mm)

33

50

Colour

Qty

Black/Yellow

1

Packs HAZT

175


PROTECTION & ADHESIVES

SHIELD EXTRA TOUGH BUILDERS WIPES

Product Code

SHIELD HEAVY DUTY BUILDERS WIPES

Multi use wipes formulated to clean and remove wet and semi-cured paint, grease, glues, sealant, adhesive, bitumen, tar, expanding foam, oil, silicone and permanent marker. Contains aloe vera and anti-bacterial additive.

A heavy duty textured wipe designed to remove the most stubborn substances, such as paint, grease, glue, sealant, adhesives, bitumen, tar, expanding foam and many other wet and semi-cured substance.

• 100 pack qty • Textured finish

• 75 pack qty • Textured finish

Wipes Qty

Packs SCRUB

WIPES & PROTECTIVE FILMS

Wipes Qty

Product Code

Packs 100

SHIELD PROTECTIVE FILMS

HDSCRUB

75

Shield protective film is a highly effective selfadhesive product, giving protection from foot traffic, debris, spills etc. Easy to apply, the film can be left for up to 30 days before simple removal. Note: Please ensure you have read and fully understood the usage guidelines before installation.

Product Thickness Width Length (mm) (m) (mm) Code

Type

Rolls 25CP 50CP 100CP 25HP 50HP 25WP 50WP

176

0.05 0.05 0.05 0.05 0.05 0.05 0.05

600 600 600 600 600 600 600

25 50 100 25 50 25 50

Carpet Carpet Carpet Hard Surface Hard Surface Glass Glass


DUST SHEETS

PROTECTION & ADHESIVES

SHIELD PROFESSIONAL DUST SHEETS

SHIELD LAMINATED DUST SHEETS

High quality dust sheet for multiple uses including floor and furniture covering during decoration.

The same high quality dust sheet with a lamination to greatly reduce risk of paint and liquid soak-through.

Product Code

Length

Width

(ft)

(ft)

12 12

9 12

Qty

Packs CDS129 CDS1212

1 1

Product Code

Length

Width

(ft)

(ft)

12

9

Qty

Packs CDSL129

1

SHIELD PROFESSIONAL DUST SHEETS High quality and cut to a convenient width to suit standard staircases avoiding need to fold and therefore reducing risk of trips and falls.

Product Code

Length

Width

(ft)

(ft)

24

3

Qty

Packs CDSS243

1

177


DOOR ACCESSORIES 179 - TUBULAR LATCHES 179 - ADJUSTABLE ROLLER CATCHES 179 - BALES CATCHES 180 - MAGNETIC CATCHES 180 - DOUBLE ROLLER CATCHES 180 - DOUBLE BALL CATCHES

180 - MODESTY BLOCKS 180 - KNOCK DOWN BLOCKS 181 - PVC DOOR STOPS 181 - PVC DOOR WEDGES 181 - SPRING DOOR STOPS


LATCHES & CATCHES

DOOR ACCESSORIES

DOOR ACCESSORIES A comprehensive range of door and cupboard accessories for a variety of applications.

TUBULAR LATCHES -

Brass

Nickel

Designed for use on internal doors with a lever handle. Supplied with matching strike plate in electro brass or nickel plated finishes. Product Code

Size HxWxD (mm)

Hole 0 in Strike Plate (mm)

Hole 0 in Catch (mm)

Finish

Qty

5.5 5.5

6.0 6.0

Electro Brass Nickel

1 1

Packs TLBRASS63P 60 x 25 x 67 TLNICKEL63P 60 x 25 x 67

ADJUSTABLE ROLLER CATCHES -

Brass

Nickel

Used for securing internal doors that require just a push/pull handle. Adjustable roller to adjust the closing tension of the door. Supplied with matching strike plate in electro brass or nickel plated finishes.

Product Code

Size HxWxD (mm)

Hole 0 in Strike Plate (mm)

Hole 0 in Catch (mm)

Finish

Qty

4.4 4.4

5.9 5.9

Electro Brass Nickel

1 1

Packs ARCBRASSP 59 x 23.5 x 39 ARCNICKELP 59 x 23.5 x 39

BALES CATCHES -

Brass

Used for securing internal doors that require just a push/pull handle. Supplied with matching strike plate in electro brass. Product Code

Size HxWxD (mm)

Hole 0 in Strike Plate (mm)

Hole 0 in Catch (mm)

Finish

Qty

57 x 23 x 20

3.7

4.2

Electro Brass

1

Packs BC19P

179


CATCHES & BLOCKS

DOOR ACCESSORIES

MAGNETIC CATCHES Product Code

A surface mounted light duty catch for securing cupboard or cabinet doors.

Colour

Qty

40 x 22 x 12 58 x 22 x 16

4.0 6.0

White White

2 2

Zinc Product Code

A surface mounted push fit catch for securing cupboard or cabinet doors.

A solid brass push fit catch for securing cupboard or cabinet doors.

Strength (kg)

Packs MC4P MC6P

DOUBLE ROLLER CATCHES -

DOUBLE BALL CATCHES -

Size LxWxH

Size (mm)

Hole  (mm)

Finish

Qty

28 x 32

4.5

Zinc

2

Packs DRP

Brass

Chrome Product Code

Size (mm)

Finish

Qty

43 x 8.0 50 x 8.5 43 x 8.0 50 x 8.5

Electro Brass Electro Brass Chrome Satin Chrome Satin

2 2 2 2

Packs DBC40BRASSP DBC50BRASSP DBC40CHROMEP DBC50CHROMEP

MODESTY BLOCKS Used for the assembly of boards at 90 degrees.

Product Code

Size LxWxH

0 (mm)

Hole

34 x 13 x 13 34 x 13 x 13

4.8 4.8

Size LxWxH

0 (mm)

35 x 25 x 12 35 x 25 x 12

4.9 4.9

Colour

Qty

White Brown

2 2

Colour

Qty

White Brown

2 2

Packs MBWHITEP MBBROWNP

KNOCK DOWN BLOCKS Used for the assembly of boards at 90 degrees. Secured with a bolt into the thread of the second block which draws the two fittings together.

180

Product Code

Hole

Packs KDWHITEP KDBROWNP


DOOR STOPS & WEDGES

DOOR ACCESSORIES

PVC DOOR STOPS Product Code

A floor mounted door stop used to prevent doors from damaging walls.

Size LxWxH

0 (mm)

Hole

21 x 32 21 x 32

6.0 6.0

Size LxWxH

0 (mm)

DWEDGE

136 x 43 x 29

4.4

Product Code

Size LxWxH

0 (mm)

78 x 24 78 x 24

4.0 4.0

Colour

Qty

Black White

2 2

Colour

Qty

Grey

2

Colour

Qty

Black Nickel

2 2

Packs DSBLACKP DSWHITEP

PVC DOOR WEDGES Product Code

A triangular shaped wedge used to temporarily stop doors from closing.

SPRING DOOR STOPS -

Hole

Packs

Brass

A wall or skirting board mounted door stop used to prevent doors from damaging walls.

Nickel Hole

Packs SSBRASSP SSNICKELP

Available in Yellow, Zinc, Black & Stainless Steel See pages 12-14 Mixed Trays on page 20

To BS EN

ISO 1459

2:2008

181


SECURITY SOLUTIONS 183 - WEATHERPROOF PADLOCKS 183 - LAMINATED PADLOCKS 183 - COMBINATION PADLOCKS 184 - BRASS PADLOCKS 184 - RECTANGULAR PADLOCKS 185 - DISC PADLOCKS 185 - STAINLESS STEEL PADLOCK

186 - SAFES & CASES 186 - CABLE LOCK 186 - CABLES & CHAINS 187 - RATCHET STRAPS 188 - TIE DOWNS 189 - BUNGEE CORDS


PADLOCKS

SECURITY SOLUTIONS

WEATHERPROOF PADLOCKS A laminated padlock with a durable vinyl cover to enhance corrosion resistance and improve weatherproofing.

SECURITY RATING

IDEAL FOR:

Sheds

Product Code

WEATHER RATING

Gates

Chains

Size Shackle Gauge Security Keys Qty (mm) (mm) Rating

Packs WP40

40

8

5

3

1

LAMINATED PADLOCKS An economic padlock ideal for lower security applications.

SECURITY RATING

WEATHER RATING

IDEAL FOR:

Sheds

Gates

Chains

STANDARD SHACKLE Product Code

LONG SHACKLE

Size Shackle Gauge Security Keys Qty (mm) Rating

(mm)

Packs LSP40 LSP50

Product Code

Size Shackle Gauge Security Keys Qty (mm) Rating

(mm)

Packs 40 50

6.1 8.8

5 6

3 3

1 1

LSP40L LSP50L

40 50

6.1 8.8

4 5

3 3

1 1

COMBINATION PADLOCKS A key-less solution commonly used on luggage, tool boxes and storage lockers. IDEAL FOR:

WEATHER RATING

Luggage Toolboxes

Product Code

SECURITY RATING

Storage Lockers

Size Shackle Gauge Security Dials Qty (mm) Rating

(mm)

Packs CP21 CP28 CP38

21 28 38

3.1 5 6

1 2 3

3 4 4

1 1 1

183


PADLOCKS

SECURITY SOLUTIONS

BRASS PADLOCKS

SECURITY RATING

A durable medium security padlock used for a variety of applications.

WEATHER RATING

IDEAL FOR:

Luggage

Cabinets

Sheds

Gates

STANDARD SHACKLE

LONG SHACKLE

Size Shackle Gauge Security Keys Qty (mm) (mm) Rating

Product Code

Product Code

Packs

Size Shackle Gauge Security Keys Qty (mm) Rating

(mm)

Packs

P30 P40 P40X2 P50 P60

30 40 40 50 60

5.2 6.3 6.3 8.1 9.5

3 5 5 6 7

3 3 3 3 3

1 1 2 1 1

P40L P50L

40 50

6.3 8.1

4 5

3 3

1 1

BRASS PADLOCKS - KEY ALIKE

SECURITY RATING

Set of four identical brass padlocks having the same key code so all four keys enclosed will fit each lock within the pack. This is convenient where numerous locks are to be used by the same group of people or person. A durable medium security padlock used for a variety of applications.

WEATHER RATING

IDEAL FOR:

Luggage

Cabinets

Sheds

Gates

Product Code

Size

Shackle Gauge

(mm)

(mm)

Security Rating

Keys

Qty

40

6.3

5

4

4

Packs P40KA

BRASS RECTANGULAR PADLOCKS A high security padlock used for securing chain, shuttering and catches where there is a risk of cropping, hacksaw or hammer attacks. IDEAL FOR:

Chains

Product Code

Shutters

Garages

Size

Shackle Gauge

(mm)

(mm)

Security Rating

Keys

Qty

75

11.7

8

3

1

Packs RP75

184

SECURITY RATING

WEATHER RATING


PADLOCKS

SECURITY SOLUTIONS

ARMOURED RECTANGULAR PADLOCKS A durable high security padlock used for securing chain, shuttering and catches where there is a risk of cropping or hacksaw attacks.

SECURITY RATING

WEATHER RATING

IDEAL FOR:

Chains

Shutters

Product Code

Garages

Size

Shackle Gauge

(mm)

(mm)

Security Rating

Keys

Qty

90

12

9

3

1

Packs ARP90

STAINLESS STEEL PADLOCK A medium to high security padlock designed to handle extreme weather conditions. The shrouded shackle ensures maximum resistance against cutting and prying. Ideal for shutters, gates, garages and sheds SECURITY RATING

IDEAL FOR:

Chains

Product Code

Shutters

WEATHER RATING

Garages

Size

Shackle Gauge

(mm)

(mm)

Security Rating

Keys

Qty

50

8

6

3

1

Packs SS50SS

DISC PADLOCKS A corrosion resistant medium to high security padlock used for securing chain and catches where there is a risk of cropping attacks. IDEAL FOR:

SECURITY RATING

WEATHER RATING

Shutters

Gates

Product Code

Size

Garages

Shackle Gauge

Sheds

(mm)

(mm)

Security Rating

Keys

Qty

70

9

8

3

1

Packs DP70

185


CABINETS, SAFES, CABLES & CHAINS

SECURITY SOLUTIONS

KEY CABINET

KEY SAFE

Provides safe and easy storage of multiple keys. Steel body with 20 hooks and a changeable 3 digit combination dial. .

Convenient and secure storage of keys. Solid and reinforced aluminium door with concealed combination dial for improved weather resistance. Provides secure and convenient key storage for care workers, cleaners, tradesmen and access to holiday homes. .

Size

Product Code

(inch)

Dials

Hooks

Box Qty

Carton Qty

Product Code

3

20

1

20

KEYSAFE

Packs

Dials

Pack Qty

Box Qty

4

1

6

Packs

20KEYCAB

8

CABLE LOCK

SECURITY RATING

Protective vinyl coating to enhance corrosion resistance and scratch prevention. Four dial combination gives multiple locking options.

WEATHER RATING

IDEAL FOR:

Bicycles

Machinery

Product Code

Ladders

Size

Cable Gauge

(mm)

(mm)

Security Rating

Dials

Qty

1000

8

4

4

1

Packs CL1000

LOOPED CABLE

SECURITY CHAIN

A weather resistant, braided steel security cable for increased strength and flexibility. Ideal for securing gates, site machinery and ladders.

A hardened steel security chain with anti-crop square links, covered with an anti-scratch nylon protective sleeve.

SECURITY RATING

SECURITY RATING

WEATHER RATING

WEATHER RATING

IDEAL FOR:

IDEAL FOR:

Machinery

Gates

Ladders

Product Code

Size

Cable Gauge

(mm)

(mm)

Security Rating

Qty

1800 3000

10 15

6 7

1 1

Bicycles

Packs LC1800 LC3000

186

Machinery

Bicycles

Ladders

Product Code

Size

Chain Gauge

(mm)

(mm)

Security Rating

Qty

1000 1500 2000

8 8 8

8 8 8

1 1 1

Packs SC1000 SC1500 SC200


RATCHET STRAPS

SECURITY SOLUTIONS

STANDARD DUTY S HOOK RATCHET STRAPS

STANDARD DUTY J HOOK RATCHET STRAPS

Ideal for quickly securing light loads during transit or storage.

Ideal for quickly securing light loads during transit or storage.

Product Code

WxL (mm)

Working Load (kg)

25 x 5 25 x 5

250 250

Break Pack Strength (kg) Qty

Packs 5RS2S 5RS4S

Product Code

WxL (mm)

Working Load (kg)

25 x 5

350

Break Pack Strength (kg) Qty

Packs 500 500

2 4

5RS2J

700

2

COMMERCIAL DUTY J HOOK RATCHET STRAPS

HEAVY DUTY J HOOK RATCHET STRAPS

Ideal for quickly securing medium loads during transit or storage.

Ideal for quickly securing heavy loads during transit or storage.

Product Code

WxL (mm)

Working Load (kg)

35 x 6

1000

Break Pack Strength (kg) Qty

Packs 6RS2J

2000

2

Product Code

WxL (mm)

Working Load (kg)

50 x 10

2500

Break Pack Strength (kg) Qty

Packs 10RS2J

5000

2

187


TIE DOWNS & BUNGEE CORDS

SECURITY SOLUTIONS

STANDARD DUTY CAM BUCKLE TIE DOWN

STANDARD DUTY BUNGEE CORDS

Ideal for quickly securing light loads during transit or storage.

Ideal for quickly securing light loads during transit or storage.

Product Code

WxL (mm)

Working Load (kg)

Break Pack Strength (kg) Qty

Packs

WxL (mm)

Working Load (kg)

Pack Qty

0.8 x 60 0.8 x 100

40 40

2 2

Packs

5CBTD2 36 x 5

123

245

2

60BUN 100BUN

MIXED BUNGEE CORDS 8 PACK

MIXED BUNGEE CORDS 20 PACK

Ideal for quickly securing a variety of loads during transit or storage.

Ideal for quickly securing a variety of loads during transit or storage.

Product Code

Ø (mm)

Length (mm)

Working Load (kg)

Qty

4.5 8.0 8.0

25 60 80

N/A 40 40

1 4 2 2

Packs BUNMIX8

188

Product Code

Product Code

Ø (mm)

Length (mm)

Working Load (kg)

Qty

4.5 8.0 8.0 8.0 8.0

25 45 50 60 75

N/A 40 40 40 40

1 4 4 4 4 4

Packs BUNMIX20


INDEX

A

ADAPTORS......................................................... ONE PIECE........................................................................ SDS 166 TWO PIECE....................................................................... ANGLE BRACKETS............................................ ARRIS RAIL BRACKETS.................................... AUGER BITS....................................................... HIGH PERFORMANCE...............................................

166 166 166 102 106 118 119

B

BLACKJAX............................................................. 18 BLACKSMITHS DRILLS.................................... 124 BONDED ABRASIVE DISC.............................. 143 BRAD POINT WOOD BITS.............................. 117 BRICK REINFORCEMENT COIL..................................................................... 104 BROACHING CUTTERS................................... 125 BUNGEE CORDS............................................... 188

C

C2.............................................................................. 9 C2 CLASSIC............................................................................ 9 C2 DECKING....................................................................... 21 C2 EXTERIOR...................................................................... 11 C2 FLOORING.................................................................... 10 C2 TONGUE FIX................................................................ 11 C2 TRADE CASE................................................................ 10 CABLE LOCK...................................................... 186 CABLE TIES............................................................ 60 CABLE TRAY BOLTS............................................. 50 CAM BUCKLE TIE DOWN................................ 188 CARCASS SCREWS.............................................. 19 CARRIAGE BOLT.................................................. 48 CEILING ANCHORS............................................. 70 CHEMICAL ANCHOR STUDS............................ 78 CHUCKS..................................................... 131, 132 CIRCULAR SAW BLADES....................... 155, 156 CLASSIC................................................................. 12 COACH SCREWS.................................................. 24 COLLATED SCREWS............................................ 28 CLASSIC STAINLESS....................................................... 28 COARSE THREAD............................................................. 28 FINE THREAD..................................................................... 28 FLOORING SCREW......................................................... 28 SELF-DRILL.......................................................................... 28 SELF-DRILLING WING TIP.......................................... 28 CONE CUTTERS................................................ 126 CONNECTORS & BRACES............................... 107 ANGLE BRACES............................................................. 108 CORNER BRACES.......................................................... 107 CORNER PLATES........................................................... 108 MENDING PLATES....................................................... 108 MIRROR PLATES............................................................ 108 STRETCHER PLATES.................................................... 107 TEE PLATES....................................................................... 108 TIMBER CONNECTORS............................................. 108 CORRUGATED SHEET FIXINGS........................ 35 COUNTERSINKS................................................ 126 3 FLUTE............................................................................... 126 DE-BURRING................................................................... 126 CRAMPS.............................................................. 104

D

DECKING SCREW................................................ 21 C2 DECKING SCREW..................................................... 21 CLASSIC DECKING SCREW....................................... 21

SOLO DECKING SCREW.............................................. 21 DIAMOND BLADES.......................................... 141 CERAMIC BLADES........................................................ 142 CUP GRINDING WHEEL............................................ 143 MORTAR RAKING BLADES...................................... 142 MULTI-PURPOSE........................................................... 141 CHIMAERA............................................................... 141 LASER WELDED BLADE................................... 141 PREMIUM LASER WELDED BLADE........... 141 SINTERED BLADE................................................ 141 DIAMOND DRILL BITS.................................... 116 DOOR ACCESSORIES....................................... 179 ADJUSTABLE ROLLER CATCHES......................... 179 BALES CATCHES............................................................ 179 DOUBLE BALL CATCHES......................................... 180 DOUBLE ROLLER CATCHES................................... 180 KNOCK DOWN BLOCKS........................................... 180 MAGNETIC CATCHES................................................. 180 MODESTY BLOCKS...................................................... 180 PVC DOOR STOPS....................................................... 181 PVC DOOR WEDGES.................................................. 181 SPRING DOOR STOPS............................................... 181 TUBULAR LATCHES..................................................... 179 DOWTY TYPE WASHER...................................... 35 DRILL SETS................................................ 133, 134 DRIVER BITS S2 ........................................................................................163 SETS .............................................................................164, 165 V5 IMPACT........................................................................ 162 DRIVER BIT SETS.............................................. 165 DROP IN ANCHORS............................................ 75 DRY DIAMOND CORE BITS............................ 139 ACCESSORIES................................................................. 140 DRYWALL BRACKETS...................................... 107 DRYWALL SCREWS...................................... 26, 27 COARSE THREAD............................................................. 26 DENSE BOARD.................................................................. 27 FINE THREAD..................................................................... 26 REVERSE THREAD............................................................ 27 SELF-DRILL.......................................................................... 27 SHARP POINT.................................................................... 27 DUST SHEETS.................................................... 177

E

EPDM WASHERS.................................................. EXPRESS NAILS.................................................... EYES........................................................................ SCREW EYES....................................................................... VINE EYES.............................................................................

34 69 61 61 61

F

FENCING CLIPS................................................. 106 FILE CLEANING BRUSH.................................. 171 FIXING BANDS.................................................. 104 FLAT WOOD BITS............................................. 117 FORGED EYES...................................................... 77 FORGED HOOKS.................................................. 77

H

HACKSAWS........................................................ 169 HACKSAW BLADES..................................................... 170 JUNIOR................................................................................ 169 JUNIOR HACKSAW BLADES.................................. 170 LARGE.................................................................................. 169 LIGHTWEIGHT................................................................ 169 MINI 169 HAMMER-IN FIXINGS........................................ 66 HEX HEAD COVER CAPS................................... 34

HIGH TENSILE THREADED BAR....................... 51 HINGE CUTTERS............................................... 117 HINGED COVER CAPS........................................ 19 HOLESAWS........................................................ 136 HOLESAW KITS.............................................................. 138 HOOKS................................................................... 61 PICTURE HOOK SET....................................................... 61 ROUND CUP HOOKS.................................................... 61 SCREW HOOKS................................................................. 61 SQUARE CUP HOOKS................................................... 61

I

IN-DEX.................................................................... 22 INSULATION RETAINING CLIPS.................... 105 INTERLOCKING WEDGES............................... 109

J

JIGSAW BLADES............................................... 144 METAL HIGH CARBON STEEL BLADES................... 148 PREMIUM BI-METAL BLADES...................... 150 WOOD HIGH CARBON STEEL BLADES................... 144 PREMIUM BI-METAL BLADES...................... 147 JOBBER DRILLS................................................. 120 COBALT............................................................................... 120 M2 FULLY GROUND......................................... 121, 123 ROLL FORGED................................................................ 122

K

KEY CABINET..................................................... 186 KEY SAFE............................................................ 186 KNIFE BLADES.................................................. 168

L

LOOPED CABLE................................................ 186

M

MACHINE SCREWS............................................. 38 COUNTERSUNK................................................................ 38 PAN HEAD............................................................................ 38 MASONRY DRILL BITS.................................... 115 MASONRY HANGERS......................................... 97 METAL CAVITY ANCHORS................................ 67 METAL CONSTRUCTION SCREWS.................. 30 COMPOSITE PANEL........................................................ 32 CORRUGATED SHEET FIXINGS............................... 35 DOWTY TYPE WASHER............................................... 35 EPDM WASHERS.............................................................. 34 HEX HEAD COVER CAPS............................................ 34 SELA COVER AND WASHER...................................... 35 SELF-DRILLING SCREWS............................................ 30 FOR HEAVY SECTION STEEL........................... 31 FOR LIGHT SECTION STEEL............................. 30 SLASH POINT..................................................................... 32 STITCHING SCREWS...................................................... 31 WING TIP............................................................................... 33 METAL FRAMING SCREWS............................... 36 PANCAKE HEAD............................................................... 36 PAN HEAD............................................................................ 36 WAFER HEAD..................................................................... 36 METAL INSULATION DISC................................ 71 METAL INSULATION FIXINGS.......................... 71 PLASTIC COVER CAP.................................................... 71 MINI TIMBER HANGERS.................................... 98

189


INDEX

MIRROR PLATES............................................... 108 MIRROR SCREWS................................................ 19 MIXED SCREW PACKS........................................ 20 MIXED SCREW TRAYS........................................ 20 MULTI-FIX BOLT.................................................. 74 MULTI-FIX RESIN................................................. 79 MULTI-FIX SCREWS............................................ 73 CONCRETE SCREW........................................................ 73 MASONRY SCREW.......................................................... 73 MULTI-FUNCTIONAL HANGERS..................... 98 MULTI-PURPOSE DRILL BITS........................ 115 MULTI-TOOL BLADES..................................... 157 BI-METAL........................................................................... 157 CARBON STEEL.............................................................. 158 TITANIUM.......................................................................... 157

N

NAIL IN ANCHORS.............................................. 70 NAIL PLATES...................................................... 103 NAILS...................................................................... 83 ALUMINIUM....................................................................... 93 BRIGHT................................................................................... 86 COPPER................................................................................. 93 COPPER DISC RIVETS........................................... 94 COPPER STRAPS..................................................... 94 FIRMAHOLD............................................................... 83, 84 BRAD 84 CLIPPED........................................................................ 83 FUEL CELLS......................................................................... 85 GALVANISED...................................................................... 89 MASONRY............................................................................ 94 POLYMER HEADED........................................................ 85 SHERARDISED................................................................... 92 STAINLESS STEEL............................................................. 95 NUTS....................................................................... 53 HEX CONNECTOR NUT............................................... 55 HEX DOME NUT............................................................... 54 HEX FULL.............................................................................. 53 HEX SERRATED FLANGE............................................. 54 NYLON INSERT NUTS (TYPE P)............................... 53 NYLON INSERT NUTS (TYPE T)............................... 54 WING NUT........................................................................... 55 NYLON FIXINGS................................................... 72 FRAME ANCHORS.......................................................... 72 FRAME FIXINGS................................................................ 72 HAMMER FIXINGS.......................................................... 72 NYLON PLUGS...................................................... 24

P

PACKERS............................................................. 109 PADLOCKS......................................................... 183 ARMOURED..................................................................... 185 BRASS.................................................................................. 184 BRASS RECTANGULAR.............................................. 184 COMBINATION............................................................... 183 DISC 185 LAMINATED..................................................................... 183 STAINLESS STEEL.......................................................... 185 WEATHERPROOF.......................................................... 183 PIPE CLIPS............................................................. 64 PLASTIC INSULATION FIXINGS....................... 71 PLASTIC PLUGS................................................... 69 PREMIUM BI-METAL BLADES....................... 147 PROTECTIVE FILMS................................ 176, 177

R

RATCHET STRAPS............................................. 187 REBAR CUTTERS............................................... 113

190

RECIPROCATING SAW BLADES.................... 151 HIGH CARBON STEEL................................................ 151 METAL BI - METAL................................................................ 153 WOOD BI - METAL................................................................ 152 RESIN...................................................................... 79 RESIN ACCESSORIES.......................................... 81 BLOW-OUT PUMP.......................................................... 81 HOLE CLEANING BRUSHES...................................... 81 INTERNALLY THREADED SOCKETS..................... 81 MIXING NOZZLES........................................................... 81 PLASTIC SLEEVES............................................................ 81 RESIN GUNS......................................................... 80 RESTRAINT STRAPS......................................... 100 HEAVY.................................................................................. 100 LIGHT................................................................................... 101 ROOFING BOLT.................................................... 50

S

SANDING PAD................................................... 160 SANITARY FIXINGS............................................. 62 SCRATCH BRUSHES......................................... 171 PLASTIC HANDLE........................................................ 171 WOODEN HANDLE..................................................... 171 SCREW CAPS........................................................ 19 SCREW CUPS........................................................ 19 SCREW-IN FRAME TIE..................................... 105 SDS MAX HAMMER BITS................................ 114 SDS MAX STEELS............................................. 114 SDS PLUS HAMMER BITS............................... 111 SDS PLUS STEELS............................................. 112 SECURITY CHAIN............................................. 186 SELA........................................................................ 35 SELF-TAPPING SCREWS............................. 37, 39 COUNTERSUNK................................................................ 37 FLANGE HEAD.................................................................. 37 PAN HEAD............................................................................ 37 SETS................................................................. 51, 52 SHIELD DUST SHEETS................................................................. 177 PROTECTIVE FILMS........................................... 176, 177 WIPES................................................................................... 176 SHIELD ANCHORS.............................................. 76 SHIMS.................................................................. 109 SOCKET DRIVERS............................................. 166 SOCKET SCREWS................................................. 39 SOLO WOODSCREWS........................................ 15 SOLO DECKING SCREW.............................................. 21 SPEED PLUGS....................................................... 67 SPRING TOGGLES............................................... 66 STEP DRILLS...................................................... 126 STUB DRILLS..................................................... 124

T

TAPE ALUMINIUM FOIL TAPE............................................ 174 ANTI-SLIP TAPE.............................................................. 175 BARRIER TAPE................................................................. 175 CLOTH TAPE..................................................................... 173 HAZARD TAPE................................................................ 175 HIGH STRENGTH PVC BUILDERS TAPE.......... 173 MASKING TAPE.............................................................. 174 PACKAGING TAPE......................................................... 174 PVC INSULATION TAPE............................................. 174 TAPE MEASURE................................................. 170 TCT TILE & GLASS BITS................................... 116 THREADED BAR............................................ 51, 78 THROUGHBOLTS................................................. 75 TIMBER CONNECTORS................................... 108

TIMBER HANGERS.............................................. 99 TIMBER SCREWS................................................. 22 HEAVY DUTY...................................................................... 23 IN-DEX.................................................................................... 22 TRUSS CLIPS...................................................... 102 TWIN-THREADED WOODSCREWS................. 17

U

UNIVERSAL FRAMING ANCHOR.................. 103 UTILITY KNIFE BLADES.................................. 168

V

VELOCITY................................................................ 8 VERTICAL FLANGE CLIP.................................... 69

W

WALL STARTER KITS........................................ 106 WALL TIES.......................................................... 105 WASHERS.............................................................. 55 FORM A................................................................................. 55 FORM B.................................................................................. 56 FORM C................................................................................. 56 PENNY/REPAIR.................................................................. 57 SPRING................................................................................... 56 SQUARE PLATE................................................................. 56 WINDOW BOARD TIES.................................... 105 WINDOW FABRICATION SCREWS... 42, 44, 45, 46 BAYPOLE SCREWS.......................................................... 44 CILL SCREWS..................................................................... 44 ELEMENT SCREWS......................................................... 44 FOR REINFORCED FRAMES.............................. 45, 46 FOR UNREINFORCED FRAMES....................... 42, 43 MACHINE SCREWS......................................................... 44 REINFORCED FRAME SCREWS............................... 44 WEATHER BAR SCREWS.............................................. 44 WIPES.................................................................. 176 WIRE BRUSHES...................... 127, 128, 129, 130 NYLON................................................................................ 128 WIRE HAND BRUSHES.................................... 171 WIRE HANGERS................................................... 70 WORKTOP CONNECTOR................................ 107


NOTES

191


NOTES

192


ISSUE NO: 3 Cover 3.indd 1

SUPPLIER OF SCREWS, FIXINGS, FASTENERS, POWERTOOL ACCESSORIES AND BUILDERS HARDWARE

SUPPLIED BY:

SU PPL I E R OF

SCREWS, FIXINGS, FASTENERS, POWER TOOL ACCESSORIES & BUILDERS HARDWARE

2016/17 22/09/2016 11:29:38

TIMco End User Brochure 2017  
Read more
Read more
Similar to
Popular now
Just for you