ED72-749A
Before visiting the site
(12 / 56) [6] IPv4 address (IP address) Use a private address as the IP address. You can set the Address and Subnet Mask to arbitrary values from the PC. Default : Address = 192.168.0.1, Subnet Mask = 255.255.255.0 (Also write another IP address which can be temporarily used for the test service operation, which will not be used after the test operation.) 1. IP address for the Interface for use in BACnet® IP address
Ex.192.168.0.1
Subnet mask
Ex.255.255.255.0
Default gateway address
Ex.192.168.0.100
2. IP address temporarily used for the test service operation (which will not be used after the test operation) IP address
Ex.192.168.0.2
Subnet mask
Ex.255.255.255.0
Default gateway address
Ex.192.168.0.100
Restriction on IPv4 address (The following addresses cannot be used.) One of the following invalid addresses is used as the IP address: · An address outside the range of the Class A - C addresses (1.0.0.0 - 223.255.255.255) · A loop-back address (127.0.0.0 - 127.255.255.255) · An address of which the host portion (hexadecimal "0" portion of subnet mask) contains all "0"s or "1"s · An address of which the network portion (hexadecimal "1" portion of subnet mask) contains all "0"s or "1"s [Example] · 244.1.1.1 -> NG (outside the range of Class A - C addresses) · 127.0.0.1 -> NG (Loop-back address) · IP: 198.168.1.0/Subnet: 255.255.255.0 -> NG (host portion contains all "0"s.) · IP: 192.168.0.1/Subnet: 192.0.0.0 -> NG (network portion contains all "1"s.)
5
One of the following invalid addresses is used as the default gateway address: · An address outside the range of the Class A - C addresses (1.0.0.0 - 223.255.255.255) · A loop-back address (127.0.0.0 - 127.255.255.255) An invalid address is used for the subnet mask (outside the range 128.0.0.0 - 255.255.255.255, hexadecimal "1" portion contain non-sequential value or blank). [Example] · 255.255.255.244 -> NG (hexadecimal "1" portion contain non-sequential value.) CB06A069A
Test operation manual
87