Issuu on Google+

A PLANNING AND SPECIFICATION REPORT FOR

Durgan Dubois Boston, Massechussetts

studio206 Tiffany Hoffman 12 December 2011

LLC


Table of Contents

1 Introduction 2 Program 3 Furniture Specification 4 Signage

D D

studio206(11001)


1 Introduction Studio206 was retained to assist Durgan Dubois, LLC in determining the optimum planning criteria for their current and future facility needs. This information will be used at their new location as they enter a long-term leasing agreement at 75 N. State Street, Boston, MA 02109. Studio206 was responsible for assessing the firm’s current and possible future needs. These include determining firm goals and objectives, assessing work requirements per facility department, square footage requirements with growth in mind, and preliminary program prototype options. Studio206 was also charged with configuration and building system requirements and base building guidelines as identified. The decision of Durgan Dubois to take hold of the universal office design approach was taken into account. Studio206 has identified key issues through comparison of both existing and proposed office needs. The following program is the proposed solution for Durgan Dubois in regards to the site chosen. Firm conditions pertaining to culture and market need to be assessed relative to following recommendations.

D D

1-1

studio206(11001)

1


2 Program Key Issues The key issues identify facility reccommendations and organizational principles. Also included are suggestions for opporunity and change in regards to the work space, technology and culture. Challenges met by the firm on a daily basis need to be addressed by establishing facility goals. Anticipation of future changes requires flexibility of the work environment. It’s important that the firm be able to adapt and create spaces necessary for maximum productivity and effectiveness. Furthermore, competitive firms, in close proximity, drive the need to reduce business overhead. By improving space efficiencies and reallocating unused square footage, the cost greatly benifit. Improving quality of life for employees helps in productivity. By providing a range of options for individual work spaces and allowing for slight customization creates a more efficient space. People prefer to work in a variety of ways and by giving them different filing, storing and organization options of their own space helps them work more efficiently. Also, by providing adequate resources on hand aides to push more revenue and improving the business overhead. These choices allow a balance of work and personal life. Demands are put on the facility to provide appropriate resources and accommodate the diverse choices of the workforce. Durgan Dubois will respond to these by being aware of the future, recognize the need for the facility to adapt and change, and implement suggestions that support business goals.

D D

2-1

studio206(11001)

2


2 Program Space Program

2

D D

studio206(11001) 2-2


2 Program

Space Program

2

D D

studio206(11001) 2-3


2 Program

Space Program

2

D D

2-4

studio206(11001)


2 Program

Space Program

2

D D

studio206(11001) 2-5


2 Program

Space Program

2

D D

2-6

studio206(11001)


2 Program

Space Program

2

D D

2-7

studio206(11001)


2 Program

Typicals-Introduction The following section contains layouts of individual spaces typical to that of the Durgan Dubois facility. These standards are suggested solutions and may need alterations when actually designing the new work environment. The standards are designed with the intent to incorporate an ease that modularity provides. This helps with future alterations and growth of the company. Options are shown for individual spaces to accomodate a variety of work techniques. Some spaces reflect funcions that may be interchangable. These standards reflect the square footage of the individual spaces found in the Space Program.

2

The Space Standards are classified as follows: • Attorney and Staff Areas - individual offices and workstations assigned to an individual •

Auxilery Areas - areas specific to practice groups like the workrooms and file areas

• Support Areas - including functions that support the facility like reception areas, conference rooms, food service, and core support

D D

2-8

studio206(11001)


2 Program Typicals-Attorney and Staff Areas Partner Office (Option I) - “U” Configuration

12’ x 15’ = 180 sq. ft.

Features • • • •

Modular casegood furniture Limited flexibility due to fixed credenza Accomodation of conferencing at desk Limited storage height due to partial glass partitions starting at 4’ (2 walls)

Partner Office (Option II) - Island Configuration

12’ x 15’ = 180 sq. ft.

Features • • • •

D D

Modular casegood furniture Fexibility due to freestanding desk and optional credenza Limited access to conferencing Limited storage height due to partial glass partitions starting at 4’ (2 walls)

studio206(11001) 2-9

2


2 Program

Typicals-Attorney and Staff Areas Associate Office (Option I) - “U” Configuration

10’ x 12’ = 120 sq. ft.

Features • • •

Modular casegood furniture Limited flexibility due to fixed credenza and desk Limited storage height due to partial glass partitions starting at 4’ (1-2 walls)

2

Associate Office (Option II) - Island Configuration

10’ x 12’ = 120 sq. ft.

Features • • •

D D

Modular casegood furniture Limited access to conferencing Limited storage height due to partial glass partitions starting at 4’ (1-2 walls)

studio206(11001) 2-10


2 Program Typicals-Attorney and Staff Areas Attorney Office Cluster Options

2

D D

studio206(11001) 2-11


2 Program

Typicals-Attorney and Staff Areas Paralegal Office (Option I) - Island Configuration

10’ x 10’ = 100 sq. ft.

Features • • •

Modular furniture Limited flexibility due to fixed credenza and desk Limited storage height due to partial glass partitions starting at 4’ (1-2 walls)

2

Paralegal Office (Option II) - “T” Configuration

10’ x 10’ = 100 sq. ft.

Features • • •

D D

Modular furniture Limited flexibility due to fixed wall storage unit Limited storage height due to partial glass partitions starting at 4’ (1-2 walls)

studio206(11001) 2-12


2 Program

Typicals-Attorney and Staff Areas Assistant Workstation

6’ x 7’ = 42 sq. ft.

Features • •

Modular furniture Multiple variations of add ons

2

Assistant Workstation Cluster

Features •

D D

Multiple configuration options (cluster and line)

studio206(11001) 2-13


2 Program

Typicals-Auxilery Areas Work Room - Configuration I

20’ x 20’ = 400 sq. ft.

2

Configuration II

Features • • • •

D D

2-14

Modular furniture Fexibility of furniture set up Flexibility of table height Two file areas for multiple project use in the lager work rooms (2 per floor)

studio206(11001)


2 Program Typicals-Auxilery Areas Break Room

34’ x 35’ = 1190 sq. ft.

2

Features • •

D D

Stocked with vending machines, refrigerators, microwaves, coffee makers and recycle bins Dining seating, bartop seating, and lounge seating available studio206(11001) 2-15


2 Program

Typicals-Support Areas Multipurpose Room - Presentation

33’ x 30’ = 990 sq. ft.

2

Features • • •

D D

Moveable, storable furniture Flexibility of room set up Multiple light settings and retractable curtains for multipurpose use of space

studio206(11001) 2-16


2 Program Typicals-Support Areas Multipurpose Room - Training

33’ x 30’ = 990 sq. ft.

2

Features • • •

D D

Moveable, storable furniture Flexibility of room set up Multiple light settings and retractable curtains for multipurpose use of space

studio206(11001) 2-17


2 Program

Typicals-Support Areas Multipurpose Room - Meeting

33’ x 30’ = 990 sq. ft.

2

Features • • •

D D

Moveable, storable furniture Flexibility of room set up Multiple light settings and retractable curtains for multipurpose use of space

studio206(11001) 2-18


2 Program Typicals-Support Areas Large Conference Room

20’ x 35’ = 700 sq. ft.

2

Features • •

D D

Moveable, storable furniture Multiple light settings and retractable curtains for multipurpose use of space

studio206(11001) 2-19


2 Program Typicals-Support Areas Medium Conference Room

20’ x 25’ = 500 sq. ft.

2

Features • •

D D

Moveable, storable furniture Multiple light settings and retractable curtains for multipurpose use of space

studio206(11001) 2-20


2 Program Typicals-Support Areas Small Conference Room

20’ x 15’ = 300 sq. ft.

2

Features • •

D D

Moveable, storable furniture Multiple light settings and retractable curtains for multipurpose use of space

studio206(11001) 2-21


2 Program Typicals-Support Areas Copy Area

10’ x 17.5’ = 175 sq. ft.

Features • •

Ample storage space Space for a variety of printer and plotter styles

2

Coffee Area

10’ x 17.5’ = 175 sq. ft.

Features • •

D D

Small area for collaboration Room for coffee, drink and microwave bar

2-22

studio206(11001)


2 Program Typicals-Support Areas Copy/Coffee Area

20’ x 17.5’ = 350 sq. ft.

Features • • •

D D

Combining these spaces provides for more collaborative opportunity Flexible storage areas Adaptable usage

studio206(11001) 2-23

2


2 Program

Typicals-Support Areas Reception Area

34’ x 35’ = 1190 sq. ft.

2

D D

studio206(11001) 2-24


3 Furniture Specification Budget-Conference Floor

Item # TYP-1 TYP-3 TYP-7 CH-1b CH-1a CH-2 CH-3 CH-5a CH-6a HC-1 HC-2 TBL-1a TBL-1b TBL-1c TBL-2 TBL-3 TBL-6 TBL-7 LF-1

General Description assistant typical associate typical general office fabric task chair leather task chair guest chair waiting room chair chair Lounge chair hospitality cart credenza small conference table medium conference table large conference table workroom table conference training table Circle lounge table touch-down table Lateral file cabinet

Quant List Price Net Price Total Price 2 $5,838 $2,919 $5,838 7 $15,319 $7,659.50 $53,616.50 56 $2,500 $1,250 $70,000 71 $1,292 $646 $45,866 174 $1,797 $899 $156,426 16 $876 $438 $7,008 24 $1,844 $922 $22,128 130 $353 $176.50 $22,945 2 $3,270 $1,635.00 $3,270 7 $1,692 $846 $5,922 17 $3,858 $1,929 $32,793 7 $7,393 $3,696.50 $25,875.50 5 $10,346 $5,173 $25,865 4 $15,589 $7,794.50 $31,178 4 $1,207 $604 $2,416 26 $1,334 $667 17,342 2 $1,149 $574.50 $1,149 1 $1,372 $686 $686 58 $1,741 $870.50 $50,489 $580,813 plus 8.75% tax $631,634.14 plus 20% cont. $757 960 97 $757,960.97

D D

studio206(11001) 3-1

3


3 Furniture Specification Assistant Typicals

* Image shown displays a cluster of 4 units. District is only used as a single unit in this project.

3

Item Number: TYP-1 Description: Island Systems Furniture Model Number: District Dimensions: 6’ x 6’ Locations:Scattered

Features • Elevated split door locker with side closet • Low open credenza and file storage

Manufacturer: Teknion

Finishes • Laminate Goods

Manufacturer Contact Information: Corporate: Teknion Corporation 1150 Flint Road Toranto, ON M3J2J5 Canada 416-661-3370

D D

studio206(11001) 3-2


3 Furniture Specification Paralegal Typicals

3

Item Number: TYP-2 Description: Panel wall workstation Model Number: Leverage Dimensions: 8’ x 10’ Locations:Scattered-Attorney floors

Features • Option of sliding door • Option of panel design (all accoustic panel or top with glass)

Manufacturer: Teknion

Finishes • Laminate Goods

Manufacturer Contact Information: Corporate: Teknion Corporation 1150 Flint Road Toranto, ON M3J2J5 Canada 416-661-3370

D D

studio206(11001) 3-3


3 Furniture Specification AssociateTypicals-option I

3

Item Number: TYP-3 Description: “T” Shaped Configuration Model Number: District Dimensions: 12’ x 7’ Locations:Scattered-Attorney floors

Features • Coat closet • Built-in lateral files • Multiple accessories for pile options

Manufacturer: Teknion

Finishes • Case Goods

Manufacturer Contact Information: Corporate: Teknion Corporation 1150 Flint Road Toranto, ON M3J2J5 Canada 416-661-3370

D D

studio206(11001) 3-4


3 Furniture Specification AssociateTypicals-option II

3

Item Number: TYP-4 Description: “L” Shaped Configuration w/ credenza Model Number: Expansion Wood Dimensions: 8’-6” x 10’ Locations:Scattered-Attorney floors

Features • Additional credenza for storage • More compact storage for office to feel more open • Glass front door option • Tackable space

Manufacturer: Teknion

Finishes • Case Goods

Manufacturer Contact Information: Corporate: Teknion Corporation 1150 Flint Road Toranto, ON M3J2J5 Canada 416-661-3370

D D

studio206(11001) 3-5


3 Furniture Specification PartnerTypicals-option I

3

Item Number: TYP-5 Description: Island Configuration Model Number: Expansion Wood Dimensions: 9’ x 11’ Locations:Scattered-Attorney floors

Features • Frosted glass front doors • Breakfront desk • tackable space

Manufacturer: Teknion

Finishes • Case Goods

Manufacturer Contact Information: Corporate: Teknion Corporation 1150 Flint Road Toranto, ON M3J2J5 Canada 416-661-3370

D D

studio206(11001) 3-6


3 Furniture Specification PartnerTypicals-option II

3

Item Number: TYP-6 Description: “U” Shaped Configuration Model Number: Expansion Wood Dimensions: 8’-6” x 9’-6” Locations:Scattered-Attorney floors

Features • Frosted glass front doors • Breakfront desk • tackable space

Manufacturer: Teknion

Finishes • Case Goods

Manufacturer Contact Information: Corporate: Teknion Corporation 1150 Flint Road Toranto, ON M3J2J5 Canada 416-661-3370

D D

studio206(11001) 3-7


3 Furniture Specification General Staff Workstation

3

Item Number: TYP-7 Description: “U” Shaped Configuration Model Number: Expansion Desking Low Open Dimensions: 6’ x 7’ Locations:Scattered-Left wing of conference floor Manufacturer: Teknion Manufacturer Contact Information:

Features • 42” hight limit • Lateral file space • Great visibility

Finishes • Wood laminate • Frosted glass partitions

Corporate: Teknion Corporation 1150 Flint Road Toranto, ON M3J2J5 Canada 416-661-3370

D D

studio206(11001) 3-8


3 Furniture Specification Task Chair

3

Item Number: CH-1 Description: Task Chair Model Number: Marini (CAL-TB133) Dimensions: 30” x 30” x 45” Locations:partner, associate, paralegal, and assistant offices

Features • Height adjustable chair • Height adjustable arm rests • Tension Control • Three positions for back tilt options

Manufacturer: Teknion

Option A Plastic ebony frame Leather upholstery

Manufacturer Contact Information:

Option B Polished aluminum frame Fabric upholstery

Corporate: Teknion Corporation 1150 Flint Road Toranto, ON M3J2J5 Canada 416-661-3370

D D

studio206(11001) 3-9


3 Furniture Specification Guest Chair

3

Item Number: CH-2 Description: Guest Chair Model Number: Synapse (CAL-TB133) Dimensions: 23” x 24” x 32 1/2” Locations:partner, associate, and paralegal offices

Features • Detailed finger joints

Manufacturer: Teknion

Finishes • Stained beechwood

Manufacturer Contact Information: Corporate: Teknion Corporation 1150 Flint Road Toranto, ON M3J2J5 Canada 416-661-3370

D D

studio206(11001) 3-10


3 Furniture Specification Guest Chair

3

Item Number: CH-3 Description: Waiting Room Chair Model Number: Cerne Dimensions: 24” x 24 1/2” x 31” Locations:Waiting Area

Features • Barrel-curved back

Manufacturer: Teknion

Finishes • Upholstery alternates between two patterns

Manufacturer Contact Information: Corporate: Teknion Corporation 1150 Flint Road Toranto, ON M3J2J5 Canada 416-661-3370

D D

studio206(11001) 3-11


3 Furniture Specification Touch-down chair

3

Item Number: CH-4 Description: Touch-down chair Model Number: Belize Dimensions: 28” x 30” x 35” Locations: Touch-down spaces

Features • Interchangeable laptop and drink holders • Storage for files under seat • Wheels for moveability

Manufacturer: Teknion

Finishes • Side panel also upholstered • Upholstery alternates between two leather colors

Manufacturer Contact Information: Corporate: Teknion Corporation 1150 Flint Road Toranto, ON M3J2J5 Canada 416-661-3370

D D

studio206(11001) 3-12


3 Furniture Specification Multipurpose chair/ barstool

a

b

3

Item Number: CH-5 Description: multipurpose chair/ barstool Model Number: Nami Locations: • a- Multipurpose rooms, work rooms, breakroom • b- Breakroom

Dimensions: • a- 22” x 32” x 20 1/2” • b- 22” x 44” x 20 1/2”

Manufacturer: Teknion

Finishes • Used in two colors (storm white and fearless red)

Manufacturer Contact Information:

Features • Stackable, moveable, and storeable • chair stacks 20 high on a dolly or 8 high on the floor (barstool not stackable)

Corporate: Teknion Corporation 1150 Flint Road Toranto, ON M3J2J5 Canada 416-661-3370

D D

studio206(11001) 3-13


3 Furniture Specification Lounge chair/couch

a

b

3

Item Number: CH-6 Description: Lounge chair/couch Model Number: Vignette Locations: Breakroom area, conference floor

Dimensions: • a- 28” x 36” x 29” • b- 28” x 83” x 29”

Manufacturer: Teknion

Finishes • Side panel also upholstered • Upholstery alternates between two leather colors

Manufacturer Contact Information: Corporate: Teknion Corporation 1150 Flint Road Toranto, ON M3J2J5 Canada 416-661-3370

D D

studio206(11001) 3-14


3 Furniture Specification Flexible Partition

3

Item Number: P-1 Description: Flexible partition Model Number: Y1115 Dimensions: 5” x 72 1/2” x 63” Locations: Touch-down spaces

Features • Easily moveable to customize own personal exposure. • Easy to push to the side or store to use space for another use

Manufacturer: Herman Miller

Finishes • All panels in one material only

Manufacturer Contact Information: Herman Miller Representitive: Boston Sarah Gregory 617-348-3255 sarah_gregory@hermanmiller.com

D D

studio206(11001) 3-15


3 Furniture Specification Hospitality Cart

3

Item Number: HC-1 Description: Beverage cart Model Number: Hospitality Cart Dimensions: 20” x 32” x 36” Locations: Conference Rooms

Features • Can easily store beverages, snacks, AV equipment, etc. • Equipped with waste basket

Manufacturer: Teknion

Finishes • Frosted glass doors

Manufacturer Contact Information: Corporate: Teknion Corporation 1150 Flint Road Toranto, ON M3J2J5 Canada 416-661-3370

D D

studio206(11001) 3-16


3 Furniture Specification Credenza

*80” credenza is 5 cabinets long (not pictured)

3

Item Number: HC-2 Description: Beverage cabinet Model Number: Credenza Dimensions: 20” x 80” x 36” Locations: Conference Rooms

Features • Can easily store beverages, snacks, AV equipment, etc. • Equipped with waste basket

Manufacturer: Teknion

Finishes • Frosted glass doors

Manufacturer Contact Information: Corporate: Teknion Corporation 1150 Flint Road Toranto, ON M3J2J5 Canada 416-661-3370

D D

studio206(11001) 3-17


3 Furniture Specification Conference Tables

3

Item Number: TBL-1 Description: Conference Table Model Number: RA-S Locations: Conference Rooms

Dimensions • a-small conference table 1.5” x 120” x 48” • b-medium conference table 1.5” x 168” x 48” • c-large conference table 1.5” x 240” x 54”

Manufacturer: Teknion

Finishes • Sunburst pattern on the ends • Combination metal, plastic, and wood base

Manufacturer Contact Information: Corporate: Teknion Corporation 1150 Flint Road Toranto, ON M3J2J5 Canada 416-661-3370

D D

studio206(11001) 3-18


3 Furniture Specification Workroom Tables

3

Item Number: TBL-2 Description: Height adjustable table Model Number: Livello (LVWR) Dimensions: 24” x 72” x 22”-48” Locations: Workrooms

Features • Height adjustable allowing for stand up meetings in the work room. • Table height varies from 22” to 48”

Manufacturer: Teknion

Finishes

Manufacturer Contact Information: Corporate: Teknion Corporation 1150 Flint Road Toranto, ON M3J2J5 Canada 416-661-3370

D D

studio206(11001) 3-18


3 Furniture Specification Conference Training Tables

3

Item Number: TBL-3 Description: Rectangular Flip-top table Model Number: Xpress CTFT Dimensions: 24” x 72” x 30” Locations: Multipurpose rooms

Features • Easy to move and store • Lightweight • Comes equipped with power module

Manufacturer: Teknion

Finishes

Manufacturer Contact Information: Corporate: Teknion Corporation 1150 Flint Road Toranto, ON M3J2J5 Canada 416-661-3370

D D

studio206(11001) 3-19


3 Furniture Specification Breakroom Table

3

Item Number: TBL-4 Description: Rectangular Dining Table Model Number: ATCRD Dimensions: 30” x 54” x 29” Locations: Breakroom

Features • Clean, simple lines • Can fit two people on either side of the table

Manufacturer: Teknion

Finishes

Manufacturer Contact Information: Corporate: Teknion Corporation 1150 Flint Road Toranto, ON M3J2J5 Canada 416-661-3370

D D

studio206(11001) 3-20


3 Furniture Specification Oval Lounge Table

3

Item Number: TBL-5 Description: Oval Lounge Table Model Number: ATCVL Dimensions: 30” x 54” x 20” Locations: Breakroom

Features • Clean, simple lines • Perfect for the intamate lounge areas

Manufacturer: Teknion

Finishes

Manufacturer Contact Information: Corporate: Teknion Corporation 1150 Flint Road Toranto, ON M3J2J5 Canada 416-661-3370

D D

studio206(11001) 3-21


3 Furniture Specification Circle Lounge Table

3

Item Number: TBL-6 Description: Circle Lounge Table Model Number: ATCCL Dimensions: 30” dia. x 20” Locations: Outside the breakroom

Features • Clean, simple lines • Perfect for the intamate lounge areas

Manufacturer: Teknion

Finishes

Manufacturer Contact Information: Corporate: Teknion Corporation 1150 Flint Road Toranto, ON M3J2J5 Canada 416-661-3370

D D

studio206(11001) 3-22


3 Furniture Specification Collaboration Table

3

Item Number: TBL-7 Description: touch-down table Model Number: ATCCD Dimensions: 36” dia. x 29” Locations: Scattered-attorney floor

Features • Clean, simple lines

Manufacturer: Teknion

Finishes

Manufacturer Contact Information: Corporate: Teknion Corporation 1150 Flint Road Toranto, ON M3J2J5 Canada 416-661-3370

D D

studio206(11001) 3-23


3 Furniture Specification Lateral Files

3

Item Number: LF-1 Description: Lateral file Model Number: Xpress LLF20 Dimensions: 18” x 36” x 29’ Locations: Distributed

Features • Two files high to fit the larger legal file sizes. Wood vaneer front to make it more aesthetically pleasing. • Individual locks and counterweights are specified on all lateral files for safety and security.

Manufacturer: Teknion

Finishes

Manufacturer Contact Information: Corporate: Teknion Corporation 1150 Flint Road Toranto, ON M3J2J5 Canada 416-661-3370

D D

studio206(11001) 3-24


4 Signage Package Introduction

The signage package includes all the necessary information to produce and install signage for Durgan Dubois. Construction documents are to be used in implementing signage. This packet includes design drawings of the following:

• • • • • •

Reception Signage Conference Room Signage Office Signage Workstation Signage Restroom Signage Stair signage

4

D D

studio206(11001) 4-1


4 Signage Package Reception Signage

Durgan Dubois

4

Large

D letters are to be 12”

tall and the smaller letters are to be 8” tall. The height of

installation is 72” after finished floor to the bottom of the D. The line separating the names should be 1” wide and 24” tall. It should be mounted in center with the letters. Material consists of Aluminum metal channel letter mounted on the wall behind the reception desk. Letters will be mounted on celter with 1/2” bolt from rear of letters to mounting surface.

D D

studio206(11001) 4-2


4 Signage Package Conference Room Signage

1”

1/2” screw mount

7” 1/2”

1/2”

5”

8”

4 48 pt Candara text o.c.

1/4” thick painted metal plate bolt mounted 1/2” off the wall. Egraved 1/8” deep revealing unpainted metal Logo at full thickness of metal and painted Durgan Dubois green Room information engraved with braille punched out from behind.

D D

studio206(11001) 4-3


4 Signage Package Office Signage

1”

1/2” screw mount

7” 1/2”

1/2”

5”

8”

4 48 pt Candara text o.c.

1/4” thick painted metal plate bolt mounted 1/2” off the wall. Egraved 1/8” deep revealing unpainted metal Logo at full thickness of metal and painted Durgan Dubois green Room information engraved with braille punched out from behind.

D D

studio206(11001) 4-4


4 Signage Package Workstation Signage

7” 3 1/2” 1/4”

5” 2 3/4”

4 1 1/2” 48 pt Candara text o.c.

1/4” thick painted metal plate bent at 20 degree angle Logo at center painted Durgan Dubois green Room information engraved. * For paralegal offices, the front looks the same. There are magnets located on the top corners to attach to panel.

D D

studio206(11001) 4-5


4 Signage Package Bathroom Signage

7” 3 1/2”

5”

4 42 pt Candara text o.c.

1/4” thick painted metal plate bolt mounted 1/2” off the wall Logo at center painted Durgan Dubois green Room information engraved. * The men’s bathroom sign is identical with the exception of a man instead of a woman.

D D

studio206(11001) 4-6


4 Signage Package Bathroom Signage

7” 3 1/2”

5”

4 38 pt Candara text o.c.

1/4” thick painted metal plate bolt mounted 1/2” off the wall Logo at center painted Durgan Dubois green Room information engraved.

D D

studio206(11001) 4-7



Durgan + Dubois Specification Book