Page 1

Start Capacitors | Capacitors | Motor Run Capacitors


Choosing right submersible pump capacitor is a difficult task for the normal people, that is why Tibcon is providing you some useful tips to make a right choice. Pool Pump capacitors are 2 types that are Run Capacitor and Start capacitor. The Motor Run Capacitor is merged into the motor circuit to increase the capacitor running efficiency.


The run capacitor normally rated at 15-50 MFD and 370 VAC. Start capacitor helps motorists turn on and off the first mode of motor winding circuits. When driving with motor speed, the initial capacitor varies into winding circuits, it is normally rated at 125 or 250 VAC and 50-400 MFD.


All pool pump motors will not use capacitors. The split phase motor is extensively used in the jetted and spa tubs, and above ground pools. It has a start switch and starts winding without capacitors. The Tibcon motor Start Capacitor is mostly used is in ground pool pumps


The starting torque is higher than full load and starting current is lower than the split phase equivalent. There is no start switch for the permanent split capacitor and is often called as a “switchless� motor. If you want to replace your pump capacitor, replace it by matching with the 'MFD' number on the capacitors


For More Start Capacitor Visit http://tibcon.net/productdetails/startcapacitors-manufacturer

Start Capacitors | Capacitors | Motor Run Capacitors  

Choosing right submersible pump capacitor is a difficult task for the normal people, that is why Tibcon is providing you some useful tips to...

Start Capacitors | Capacitors | Motor Run Capacitors  

Choosing right submersible pump capacitor is a difficult task for the normal people, that is why Tibcon is providing you some useful tips to...

Advertisement