Issuu on Google+


CORNICEStyle, material and finish specific to individual range. Style, material and finish specific to individual range.

CODE 2.3 meters 6061

HALF SWING-OUT WIRE BASKETS For use in a base corner units 2663/64 2627/28 & 2189/90 only.

CODE MECH001A

NOTE: SUPPLIED AS A PAIR.

Range M11 & R07 only

LIGHT FASCIA

CODE Style, material and finish specific to individual range.

2.3 meters 6065

BREAKFAST BAR LEGS - 895MM HIGH 895mm x 25mm diameter chrome plated steel tube with sockets.

CODE

Chrome LEGS036A

Range M11 & R07 only

CONTINUOUS PLINTH - 150MM HIGH Colour specific to individual range, supplied in 2.5m lengths Optional extra, manufactured from MFC, supplied in 2.5m lengths Optional extra, manufactured from MFC,supplied in 2.5m lengths RETURN PLINTH - 175MM HIGH Colour specific to individual range. Optional extra, manufactured from MFC. Optional extra, manufactured from MFC. PLINTH SEALER Transparent plastic extrusion which clips to the bottom edge of the plinth. The flexible lip then seals the gap between the floor and the plinth.

CODE Range specific 6094 Aluminium effect 6083 White High Gloss 6087 CODE Range specific 6095 Aluminium effect 6085 White High Gloss 6088 CODE PLAS250A

BREAKFAST BAR LEGS - 870MM HIGH 870mm x 60mm diameter, adjustable height leg.

BREAKFAST BAR LEGS - 710MM HIGH 710mm x 60mm diameter, adjustable height leg.

STAINLESS STEEL PILASTERS Manufactured from 50 x 100mm tubing.

NOTE: SUPPLIED IN 3M LENGTHS, CUT ON SITE TO SUIT REQUIREMENTS.

PLINTH AND WORKTOP VENTILATION GRILLS

CODE

To be fitted into a housing unit plinth or *White fitted into a worktop over a highboard FACM060A housing unit. **Silver FACM082B NOTE: * MANUFACTURED FROM PLASTIC. **Gold NOTE: ** MANUFACTURED FROM ALUMINIUM, AND THEN SPRAYED THE APPROPRIATE COLOUR. FACM083A **White FACM084A 8 mm THICK WORKTOP UPSTANDS

CODE

For positioning directly above the worktop The size 100mm high x 3000mm MAX long

9199

42

MANHATTAN SPECIFIER’S GUIDE

DECOR PANEL SELF-ADHESIVE COVER CAPS WHITE VANILLA ALUMINIUM GREY OAK BEECH MAPLE NATURAL AIDIA WALNUT FERRARA OAK

CODE White LEGS032A S/Steel LEGS035A Oak LEGS031A

CODE White LEGS030A S/Steel LEGS034A Oak LEGS033A

CODE 870mm FACM232A 720mm FACM233A 900mm FACM234A

CODE PLAS267A PLAS265A PLAS270A PLAS269A PLAS266A PLAS262A PLAS268A PLAS261A


TIMBER BATTENS

CODE 50 x 50 x 2400mm timber batten for supporting 650mm deep of Granite worktops. 20 x 50 x 2400mm timber batten for supporting worktops over appliance spaces, soffit panels or infill panels.

CABLE MANAGMENT FOR LIGHTING - CABLE TIE To be used in conjunction with SelfAdhesive bases

50x50x2400 TIMB020A 20x50x2400 TIMB021A

SINGLE POSTFORMED WORKTOPS

38MM

38mm & 60mm Single postformed laminate worktop

Depth up to 600mm. 9086 Depth 601850mm. 9087

CODE FITT090A

.

HINGE OPTION TWO

CODE 175 deg

NOTE: 3.6M MAXIMUM LENGTH

DOUBLE POSTFORMED WORKTOPS

38MM

HINGE OPTION THREE

CODE

Depth 670mm. 9088 Depth 900mm. 9089

NOTE: 3.6M MAXIMUM LENGTH

2MM ACRYLIC EDGED WORKTOPS 2mm Acrylic edged laminate worktop, acrylic edging available in: - Aluminium Wave - Beech multiplex - Beech/Steel multiplex - Walnut/Steel multiplex - Planked Cherry

CODE

107 deg

HINGE OPTION FOUR

CODE

Depth up to 850mm. 9120

107 deg Soft Close

NOTE: 3.6M MAXIMUM LENGTH

SQUARE EDGED WORKTOPS 38mm Square edged laminate worktop NOTE: 3.0M MAXIMUM LENGTH

WORKTOP CONNECTOR BOLTS Each joint consists of a three butterfly bolts to be recessed into the worktop

CODE

HINGE OPTION FIVE

CODE

Depth up to 850mm. 9061

175 deg Soft Close

CODE

SOFT CLOSING DOORS - UPGRAGE OPTIONAvailable with to suit

CODE

FACM009A

Available with to suit all base, wall, highboard and tall units as an optional upgrade

HING064A

NOTE: NOT SUITABLE FOR BI-FOLD WALL UNITS OR WITH 170 DEGREE HINGES

CABLE MANAGMENT FOR LIGHTING - SELF ADHESIVE BASE To be used in conjunction with cable ties .

CODE

SOFT CLOSING DRAWERS - UPGRAGE OPTION DRAWER UNITS WITH TWIN-WALLED, FULL EXTENSION

CODE

Available as un upgrade option to all base and tall units

MECH126A

FITT091A

NOTE: THIS COMES AS STANDARD ON THE FULL EXTENSION DRAWERS DETAILED ABOVE

MANHATTAN SPECIFIER’S GUIDE

43


Worktops, Furniture, Trims and Hinges