Page 1

Free Metal Work Exam Questions and Answers for SS1 blog.teststreams.com/metal-work-exam-questions-and-answers-for-ss1/ TestStreamsBlog

September 30, 2019

These Metal Work questions and answers were pulled from our book (Metal Work questions for SS 1); Compiled to serve as a reference material to help teachers draw up test and exam questions faster. It could also help students assess their level of exam preparation. Each sample question includes correct answers. Note that Questions are based on the NERDC curriculum (UBE compliant)

Sample Metal Work Exam Questions and Answers TOPIC: CARE AND MAINTENANCE OF TOOLS, EQUIPMENT AND MACHINES DIRECTION: Choose the correct answers from the lettered options. 1. What is the function of the grease gun? A. To pump grease through the appropriate parts of the machine B. To suck out dirts before greasing C. To remove rust in the machine parts D. To clean the parts before greasing See the Answer The correct answer is A. 2. The resistance of the oil to flow is known as ___________. A. gauge B. surge C. viscosity D. rift 1/4


See the Answer The correct answer is C. 3. To change the gearbox oil of any machine in the workshop and oil the sliding parts of the machine is an example of _________. A. predictive maintenance B. preventive maintenance C. corrective maintenance D. service maintenance See the Answer The correct answer is B. 4. When moving machine parts comes in contact with another moving part, this gives rise to friction which causes ________. i. heat ii. Wear iii. Loss of efficiency of machine A. iii only B. i and ii only C. i, ii and iii D. ii and iii only See the Answer The correct answer is C. 5. The cutting oils are lubricants used to _______. i. reduce friction ii. Soften the work iii. Lubricate and cool cutting tool A. iii only B. i, ii and iii C. ii only D. i only See the Answer The correct answer is B. TOPIC: CAREER OPPORTUNITIES IN METALWORK DIRECTION: Choose the correct answer from the lettered options.

2/4


1. Which of the following is not among the oldest of the metalworking occupations? A. Welder B. Smith C. Jeweler D. Founder See the Answer The correct answer is A. 2. The person who takes the drawings made by the enginers and drafts persons to create the program to cut the metal part is called a _________. A. technologist B. programmer C. machinist D. technician See the Answer The correct answer is B. Click here to get the complete Metal Work questions for SS 1 3. Which of these metal working occupation requires a few weeks to a year training. I. Machinist II. Tools and die III. Welder A. III. only B. I. only C. II. only D. II. and III. only See the Answer The correct answer is A. 4. In industries those group of metal workers who support scientists and engineers by designing, developing, producing and maintaining machine and material are the ________________. A. labourers B. service men C. technicians D. contract staff See the Answer The correct answer is A. 3/4


Want more questions like this? Get the Complete Metal Work Exam Questions and Answers for SS 1, with even more questions and answers

4/4

Profile for Teststreams

Free Metal Work Exam Questions and Answers for SS1  

These Metal Work questions and answers were pulled from our book (Metal Work questions for SS 1); Compiled to serve as a reference material...

Free Metal Work Exam Questions and Answers for SS1  

These Metal Work questions and answers were pulled from our book (Metal Work questions for SS 1); Compiled to serve as a reference material...

Advertisement