Page 1

HP0-Y39

Managing & Troubleshooting enterprise wireless networks

↘

http://www.testsexpert.com/HP0-Y39.html


Question: 1. Click the Exhibit button and view the four exhibits.

Exhibit 4: Active controller configuration A3000-10G-PoE+ Wireless Switch Active Controller side configuration file # version 5.20, Release 3111

42

www.testsexpert.com


# sysname HP # domain default enable system # telnet server enable # port-security enable # portal trap server-down # oap management-ip 24.1.1.11 slot 0 # wlan country-code US # vlan 1 # domain system access-limit disable state active idle-cut disable self-service-url disable # user-group system # local-user admin password simple admin authorization-attribute level 3 service-type telnet # wlan rrm dot11a mandatory-rate 6 12 24 dot11a supported-rate 9 18 36 48 54 dot11b mandatory-rate 1 2 dot11b supported-rate 5.5 11 dot11g mandatory-rate 1 2 5.5 11 dot11g supported-rate 6 9 12 18 24 36 48 54 # wlan service-template 1 crypto ssid HP_Openaccess bind WLAN-ESS 0 cipher-suite ccmp security-ie rsn service-template enable # interface NULL0

42

www.testsexpert.com


# interface Vlan-interface1

ip address 24.1.1.10 255.255.255.0 # interface GigabitEthernet1/0/1 # interface WLAN-ESS0 port-security port-mode psk port-security tx-key-type 11key port-security preshared-key pass-phrase simple Ay+G8lqFPsu0FxRl6KqYEWN7QkT # wlan ap wa2620eagn model WA2620E-AGN serial-id 219801A0AL9099G00466 radio 1 radio 2 service-template 1 radio enable # dhcp enable # ip route-static 0.0.0.0 0.0.0.0 24.1.1.1 # load xml-configuration # user-interface aux 0 user-interface vty 0 4 authentication-mode scheme user privilege level 3 # return A customer is experiencing difficulties with an access point (AP) not reaching operational (Run/M) state. A trace is taken as shown in the Ethernet packet exhibit. Based on the exhibits, which issue could explain the AP remaining in Idle status? A. The AP and active controller are not in the same subnet. B. Option 43 is not configured properly on the DHCP server. C. The AP is sending a unicast packet to the active controller instead of the required broadcast packet. D. A device between the active controller and the AP is using NAT, which prevents proper communication.

42

www.testsexpert.com


Answer: D Question: 2. Click the Exhibit button. Exhibit: Active controller configuration A3000-10G-PoE+ Wireless Switch Active Controller side configuration file # version 5.20, Release 3111 # sysname HP # domain default enable system # telnet server enable # port-security enable # portal trap server-down # oap management-ip 192.168.0.101 slot 0 # wlan country-code US # vlan 1 # vlan 2 # domain system access-limit disable state active idle-cut disable self-service-url disable # dhcp server ip-pool 0 network 192.168.0.0 mask 255.255.255.0 gateway-list 192.168.0.200 option 43 hex 80070000 01C0A800 64 # user-group system # local-user admin password simple admin authorization-attribute level 3 service-type telnet

42

www.testsexpert.com


# wlan rrm dot11a mandatory-rate 6 12 24 dot11a supported-rate 9 18 36 48 54 dot11b mandatory-rate 1 2 dot11b supported-rate 5.5 11 dot11g mandatory-rate 1 2 5.5 11 dot11g supported-rate 6 9 12 18 24 36 48 54 # wlan radio-policy rp1 beacon-interval 2000 dtim 4 rts-threshold 999 fragment-threshold 1000 # wlan service-template 1 crypto ssid HP_Openaccess bind WLAN-ESS 0 cipher-suite ccmp security-ie rsn service-template enable # interface NULL0 # interface Vlan-interface1 ip address 192.168.0.100 255.255.255.0 # interface Vlaninterface2 ip address 192.168.1.100 255.255.255.0 # interface GigabitEthernet1/0/1 port link-type trunk port trunk permit vlan all # interface WLAN-ESS0 port-security port-mode psk port-security tx-key-type 11key port-security preshared-key pass-phrase simple Ay+G8lqFPsu0FxRl6KqYEWN7QkT # wlan ap wa2620eagn model WA2620E-AGN serial-id 219801A0AL9099G00466 radio 1 radio 2 service-template 1 radio-policy rp1 radio enable # ip route-static 0.0.0.0 0.0.0.0 192.168.0.200

42

www.testsexpert.com


# load xml-configuration # user-interface aux 0 user-interface vty 0 4 authentication-mode scheme user privilege level 3 # return A customer is experiencing network performance issues with their wireless network. The customer decides to take corrective actions on their wireless active controller. Based on the exhibit, what will happen on the wireless network if the customer sent a 1200 byte packet from a wireless client associated to essid HP_Openaccess? (Select two.) A. The wireless packet will be fragmented. B. The wireless packet will trigger RTS/CTS frames to be sent. C. The wireless packet will not be fragmented. D. The wireless packet will not trigger RTS/CTS frames to be sent. E. The access point will send more Beacon frames than if the default configuration had been left unchanged.

42

www.testsexpert.com


Answer: AB Question: 3. Click the Exhibit button and view both exhibits.

Exhibit 2: Active controller configuration Exhibit 2 Active controller # version 5.20, Release 3111 # sysname HP # domain default enable system # telnet server enable # port-security enable # portal trap server-down # oap management-ip 192.168.0.101 slot 0 # wlan country-code US

42

www.testsexpert.com


# vlan 1

# vlan 2 # domain system access-limit disable state active idle-cut disable self-service-url disable # dhcp server ip-pool 0 network 192.168.0.0 mask 255.255.255.0 gateway-list 192.168.0.200 option 43 hex 80070000 01C0A800 60 # dhcp server ip-pool 1 network 192.168.1.0 mask 255.255.255.0 gateway-list 192.168.1.200 option 43 hex 80070000 01C0A800 60 # user-group system # local-user admin password simple admin authorization-attribute level 3 service-type telnet # wlan rrm dot11a mandatory-rate 6 12 24 dot11a supported-rate 9 18 36 48 54 dot11b mandatory-rate 1 2 dot11b supported-rate 5.5 11 dot11g mandatory-rate 1 2 5.5 11 dot11g supported-rate 6 9 12 18 24 36 48 54 # wlan service-template 1 crypto ssid HP_Openaccess bind WLAN-ESS 0 cipher-suite ccmp security-ie rsn service-template enable # interface NULL0 # interface Vlan-interface1

42

www.testsexpert.com


ip address 192.168.0.100 255.255.255.0 #

interface Vlaninterface2 ip address 192.168.1.100 255.255.255.0 # interface GigabitEthernet1/0/1 port link-type trunk port trunk permit vlan all # interface WLAN-ESS0 port link-type hybrid port hybrid vlan 1 untagged port-security port-mode psk port-security tx-key-type 11key port-security preshared-key pass-phrase simple Ay+G8lqFPsu0FxRl6KqYEWN7QkT # wlan ap AP1 model WA2620E-AGN serial-id 219801A0AL9099G00461 radio 1 service-template 1 radio enable radio 2 service-template 1 radio enable # wlan ap AP2 model WA2620E-AGN serial-id 219801A0AL9099G00462 radio 1 service-template 1 radio enable radio 2 service-template 1 radio enable # wlan ap AP3 model WA2620E-AGN serial-id 219801A0AL9099G00463 radio 1 service-template 1 radio enable radio 2 service-template 1 radio enable # wlan ap AP4 model WA2620E-AGN serial-id 219801A0AL9099G00464 radio 1 service-template 1

42

www.testsexpert.com


radio enable radio 2 service-template 1 radio enable # wlan ap AP5 model WA2620E-AGN serial-id 219801A0AL9099G00465 radio 1 service-template 1 radio enable radio 2 service-template 1 radio enable # dhcp enable # ip route-static 0.0.0.0 0.0.0.0 192.168.0.200 # load xml-configuration # user-interface aux 0 user-interface vty 0 4 authentication-mode scheme user privilege level 3 # return A university media course uses an auditorium that seats 400 students. Wireless access points (APs) are installed to provide access to the school's video servers. Some students are experiencing frequent interruptions to video playback while others have no issues. Based on the exhibits, what is a solution to optimize performance for all students? A. Set all radios to maximum power. B. Set all APs to the same channel. C. Enable load balancing of clients across APs. D. Increase the beacon interval.

42

www.testsexpert.com


Answer: C Question: 4. Click the Exhibit button and view both exhibits.

Exhibit 2: Active controller configuration Exhibit 2 Active controller # version 5.20, Release 3111 # sysname HP # domain default enable system # telnet server enable # port-security enable # portal trap server-down # oap management-ip 192.168.0.101 slot 0

42

www.testsexpert.com


# wlan country-code US # vlan 1 # vlan 2 # domain system access-limit disable state active idle-cut disable self-service-url disable # dhcp server ip-pool 0 network 192.168.0.0 mask 255.255.255.0 gateway-list 192.168.0.200 option 43 hex 80070000 01C0A800 60 # dhcp server ip-pool 1 network 192.168.1.0 mask 255.255.255.0 gateway-list 192.168.1.200 option 43 hex 80070000 01C0A800 60 # user-group system # local-user admin password simple admin authorization-attribute level 3 service-type telnet # wlan rrm dot11a mandatory-rate 6 12 24 dot11a supported-rate 9 18 36 48 54 dot11b mandatory-rate 1 2 dot11b supported-rate 5.5 11 dot11g mandatory-rate 1 2 5.5 11 dot11g supported-rate 6 9 12 18 24 36 48 54 # wlan service-template 1 crypto ssid HP_Openaccess bind WLAN-ESS 0 cipher-suite ccmp security-ie rsn service-template enable # interface NULL0 # interface Vlan-interface1 ip address 192.168.0.100 255.255.255.0

42

www.testsexpert.com


# interface Vlaninterface2 ip address 192.168.1.100 255.255.255.0 # interface GigabitEthernet1/0/1 port link-type trunk port trunk permit vlan all # interface WLAN-ESS0 port link-type hybrid port hybrid vlan 1 untagged port-security port-mode psk port-security tx-key-type 11key port-security preshared-key pass-phrase simple Ay+G8lqFPsu0FxRl6KqYEWN7QkT # wlan ap AP1 model WA2620E-AGN serial-id 219801A0AL9099G00461 radio 1 service-template 1 radio enable radio 2 service-template 1 radio enable # wlan ap AP2 model WA2620E-AGN serial-id 219801A0AL9099G00462 radio 1 radio 2 service-template 1 radio enable # wlan ap AP3 model WA2620E-AGN serial-id 219801A0AL9099G00463 radio 1 radio 2 service-template 1 radio enable # wlan ap AP4 model WA2620E-AGN serial-id 219801A0AL9099G00464 radio 1 radio 2 service-template 1 radio enable # wlan ap AP5 model WA2620E-AGN serial-id 219801A0AL9099G00465 radio 1 service-template 1

42

www.testsexpert.com


radio enable radio 2

service-template 1 radio enable # dhcp enable # ip route-static 0.0.0.0 0.0.0.0 192.168.0.200 # load xml-configuration # user-interface aux 0 user-interface vty 0 4 authentication-mode scheme user privilege level 3 # return A university media course uses an auditorium that seats 400 students. Wireless access points (APs) are installed to provide access to the school's video servers. Students running 802.11n clients are not seeing optimal bandwidth connection data rates. Based on the exhibits, what is a solution to optimize 802.11n data rates? A. Disable High Throughput (HT mode) on all radios. B. Disable RTS/CTS capability on non802.11n client NICs. C. Configure Band Steering mode on radio 1 on all APs and radio 2 on AP3 and AP5. D. Configure Greenfield mode on radio1 on all APs and radio 2 on AP3 and AP5.

42

www.testsexpert.com


Answer: D Question: 5. Click the Exhibit button and view both exhibits.

Exhibit 2: Active controller configuration # version 5.20, Release 3111 # sysname HP # domain default enable system # telnet server enable # port-security enable # portal trap server-down # oap management-ip 192.168.0.101 slot 0 #

42

www.testsexpert.com


wlan country-code US # vlan 1 # vlan 2 # domain system access-limit disable state active idle-cut disable self-service-url disable # dhcp server ip-pool 0 network 192.168.0.0 mask 255.255.255.0 gateway-list 192.168.0.200 option 43 hex 80070000 01C0A800 60 # dhcp server ip-pool 1 network 192.168.1.0 mask 255.255.255.0 gateway-list 192.168.1.200 option 43 hex 80070000 01C0A800 60 # user-group system # local-user admin password simple admin authorization-attribute level 3 service-type telnet # wlan rrm dot11a mandatory-rate 6 12 24 dot11a supported-rate 9 18 36 48 54 dot11b mandatory-rate 1 2 dot11b supported-rate 5.5 11 dot11g mandatory-rate 1 2 5.5 11 dot11g supported-rate 6 9 12 18 24 36 48 54 loadbalance session 5 # wlan service-template 1 crypto ssid HP_Openaccess bind WLAN-ESS 0 cipher-suite tkip security-ie rsn service-template enable # interface NULL0 # interface Vlan-interface1

42

www.testsexpert.com


ip address 192.168.0.100 255.255.255.0 # interface Vlaninterface2 ip address 192.168.1.100 255.255.255.0 # interface GigabitEthernet1/0/1 port link-type trunk port trunk permit vlan all # interface WLAN-ESS0 port link-type hybrid port hybrid vlan 1 untagged port-security port-mode psk port-security tx-key-type 11key port-security preshared-key pass-phrase simple Ay+G8lqFPsu0FxRl6KqYEWN7QkT # wlan ap AP1 model WA2620E-AGN serial-id 219801A0AL9099G00461 radio 1 service-template 1 radio 2 service-template 1 radio enable # wlan ap AP2 model WA2620E-AGN serial-id 219801A0AL9099G00462 radio 1 service-template 1 radio 2 service-template 1 radio enable # wlan ap AP3 model WA2620E-AGN serial-id 219801A0AL9099G00463 radio 1 service-template 1 radio 2 service-template 1 radio enable # wlan ap AP4 model WA2620E-AGN serial-id 219801A0AL9099G00464 radio 1 service-template 1 radio 2 service-template 1 radio enable #

42

www.testsexpert.com


wlan ap AP5 model WA2620E-AGN serial-id 219801A0AL9099G00465 radio 1 service-template 1 radio 2 service-template 1 radio enable # dhcp enable # ip route-static 0.0.0.0 0.0.0.0 192.168.0.200 # load xml-configuration # user-interface aux 0 user-interface vty 0 4 authentication-mode scheme user privilege level 3 # return A university media course uses an auditorium that seats 400 students. Students are experiencing slow network performance, and some clients are having difficulty connecting to the wireless network. The IT staff installed wireless access points (APs) over a year ago. Previous classes, consisting of 200 students had no problems. Based on the exhibits, what is a solution to optimize performance for all students? A. Enable radio 1 on all APs. B. Add service-template1 to all 2.4Ghz radios. C. Remove service-template1 from all 5Ghz radios. D. Set cipher-suite to ccmp for service-template1.

42

www.testsexpert.com


Answer: A Question: 6. Click the Exhibit button and view both exhibits.

Exhibit 2: Active controller configuration Exhibit 2 Active controller # version 5.20, Release 3111 # sysname HP # domain default enable system # telnet server enable # port-security enable # portal trap server-down # oap management-ip 192.168.0.101 slot 0 #

42

www.testsexpert.com


wlan country-code US #

vlan 1 # vlan 2 # domain system access-limit disable state active idle-cut disable self-service-url disable # dhcp server ip-pool 0 network 192.168.0.0 mask 255.255.255.0 gateway-list 192.168.0.200 option 43 hex 80070000 01C0A800 60 # dhcp server ip-pool 1 network 192.168.1.0 mask 255.255.255.0 gateway-list 192.168.1.200 option 43 hex 80070000 01C0A800 60 # user-group system # local-user admin password simple admin authorization-attribute level 3 service-type telnet # wlan rrm dot11a mandatory-rate 6 12 24 dot11a supported-rate 9 18 36 48 54 dot11b mandatory-rate 1 2 dot11b supported-rate 5.5 11 dot11g mandatory-rate 1 2 5.5 11 dot11g supported-rate 6 9 12 18 24 36 48 54 loadbalance session 5 # wlan service-template 1 crypto ssid HP_Openaccess bind WLAN-ESS 0 cipher-suite ccmp security-ie rsn service-template enable # interface NULL0 #

42

www.testsexpert.com


interface Vlan-interface1 ip address 192.168.0.100 255.255.255.0 # interface Vlaninterface2 ip address 192.168.1.100 255.255.255.0 # interface GigabitEthernet1/0/1 port link-type trunk port trunk permit vlan all # interface WLAN-ESS0 port link-type hybrid port hybrid vlan 1 untagged port-security port-mode psk port-security tx-key-type 11key port-security preshared-key pass-phrase simple Ay+G8lqFPsu0FxRl6KqYEWN7QkT # wlan ap AP1 model WA2620E-AGN serial-id 219801A0AL9099G00461 radio 1 service-template 1 radio enable radio 2 service-template 1 channel 6 maxpower 10 radio enable # wlan ap AP2 model WA2620E-AGN serial-id 219801A0AL9099G00462 radio 1 service-template 1 radio enable radio 2 service-template 1 channel 1 maxpower 10 radio enable # wlan ap AP3 model WA2620E-AGN serial-id 219801A0AL9099G00463 radio 1 service-template 1 radio enable radio 2 service-template 1 channel 1 maxpower 10

42

www.testsexpert.com


radio enable # wlan ap AP4 model WA2620E-AGN serial-id 219801A0AL9099G00464 radio 1 service-template 1 radio enable radio 2 service-template 1 channel 11 maxpower 10 radio enable # wlan ap AP5 model WA2620E-AGN serial-id 219801A0AL9099G00465 radio 1 service-template 1 radio enable radio 2 service-template 1 channel 11 maxpower 10 radio enable # dhcp enable # ip route-static 0.0.0.0 0.0.0.0 192.168.0.200 # load xml-configuration # user-interface aux 0 user-interface vty 0 4 authentication-mode scheme user privilege level 3 # return A university media course uses an auditorium that seats 400 students. Wireless access points (APs) are installed to provide access to the school's video servers. All clients show maximum signal strength, but some students are experiencing frequent interruptions of video playback. Based on the exhibits, what is a solution to optimize network throughput for all students? A. setting maximum power on radio 1 on all APs B. setting mandatory data rates for 802.11a to 12 C. changing the channel on radio 2 of AP5 to channel 6 D. lowering the RTS threshold on all radios

Answer: C

42

www.testsexpert.com


Question: 7. Click the Exhibit button. Exhibit: Active controller configuration Exhibit Active controller # version 5.20, Release 3111 # sysname HP # domain default enable system # telnet server enable # port-security enable # portal trap server-down # oap management-ip 192.168.0.101 slot 0 # wlan country-code US # vlan 1 # vlan 2 # domain system access-limit disable state active idle-cut disable self-service-url disable # dhcp server ip-pool 0 network 192.168.0.0 mask 255.255.255.0 gateway-list 192.168.0.200 option 43 hex 80070000 01C0A800 60 # dhcp server ip-pool 1 network 192.168.1.0 mask 255.255.255.0 gateway-list 192.168.1.200 option 43 hex 80070000 01C0A800 60 # user-group system

42

www.testsexpert.com


# local-user admin password simple admin authorization-attribute level 3 service-type telnet # wlan rrm dot11a mandatory-rate 6 12 24 dot11a supported-rate 9 18 36 48 54 dot11b mandatory-rate 1 2 dot11b supported-rate 5.5 11 dot11g mandatory-rate 1 2 5.5 11 dot11g supported-rate 6 9 12 18 24 36 48 54 # wlan service-template 1 crypto ssid StudentLabs bind WLAN-ESS 0 cipher-suite ccmp security-ie rsn service-template enable # interface NULL0 # interface Vlan-interface1 ip address 192.168.0.100 255.255.255.0 # interface Vlaninterface2 ip address 192.168.1.100 255.255.255.0 # interface GigabitEthernet1/0/1 port link-type trunk port trunk permit vlan all # interface WLAN-ESS0 port link-type hybrid port hybrid vlan 1 untagged port-security port-mode psk port-security tx-key-type 11key port-security preshared-key pass-phrase simple Ay+G8lqFPsu0FxRl6KqYEWN7QkT # wlan ap AP1 model WA2620E-AGN serial-id 219801A0AL9099G00461 radio 1 service-template 1 radio enable radio 2 service-template 1 channel 6 radio enable

42

www.testsexpert.com


# wlan ap AP2 model WA2620E-AGN serial-id 219801A0AL9099G00462 radio 1 service-template 1 radio enable radio 2 service-template 1 channel 1 radio enable # dhcp enable # ip route-static 0.0.0.0 0.0.0.0 192.168.0.200 # load xml-configuration # user-interface aux 0 user-interface vty 0 4 authentication-mode scheme user privilege level 3 # return The network administrator notices that a majority of wireless clients are connecting to only one of two access points (APs) covering the floor. Based on the exhibit, which method optimizes this configuration? A. disabling support for lower data rates on the controller B. configuring all radios to maximum power C. configuring radios to use the same channels within each band D. raising the RTS threshold in the controller configuration

42

www.testsexpert.com


Answer: A Question: 8. Click the Exhibit button and view the three exhibits.

Exhibit 2: Active controller configuration # version 5.20, Release 3111 # sysname HP # domain default enable system # telnet server enable # port-security enable # portal trap server-down # oap management-ip 192.168.0.101 slot 0 # wlan country-code US

42

www.testsexpert.com


# vlan 1 # vlan 2 # domain system access-limit disable state active idle-cut disable self-service-url disable # dhcp server ip-pool 0 network 192.168.0.0 mask 255.255.255.0 gateway-list 192.168.0.200 option 43 hex 80070000 01C0A800 60 # dhcp server ip-pool 1 network 192.168.1.0 mask 255.255.255.0 gateway-list 192.168.1.200 option 43 hex 80070000 01C0A800 60 # user-group system # local-user admin password simple admin authorization-attribute level 3 service-type telnet # wlan rrm dot11a mandatory-rate 6 12 24 dot11a supported-rate 9 18 36 48 54 dot11b mandatory-rate 1 2 dot11b supported-rate 5.5 11 dot11g mandatory-rate 1 2 5.5 11 dot11g supported-rate 6 9 12 18 24 36 48 54 # wlan service-template 1 crypto ssid HP_Openaccess bind WLAN-ESS 0 cipher-suite ccmp security-ie rsn service-template enable # interface NULL0 # interface Vlan-interface1 ip address 192.168.0.100 255.255.255.0 #

42

www.testsexpert.com


interface Vlaninterface2 ip address 192.168.1.100 255.255.255.0 # interface GigabitEthernet1/0/1 port link-type trunk port trunk permit vlan all # interface WLAN-ESS0 port link-type hybrid port hybrid vlan 1 untagged port-security port-mode psk port-security tx-key-type 11key port-security preshared-key pass-phrase simple Ay+G8lqFPsu0FxRl6KqYEWN7QkT # wlan ap wa2620eagn model WA2620E-AGN radio 1 radio 2 service-template 1 radio enable # dhcp enable # ip route-static 0.0.0.0 0.0.0.0 192.168.0.200 # load xml-configuration # user-interface aux 0 user-interface vty 0 4 authentication-mode scheme user privilege level 3 # return Exhibit 3: Switch configuration sysname HP # oap management-ip 192.168.0.100 slot 0 # mirroring-group 1 local # radius scheme system # domain system # local-user admin password simple admin service-type telnet level 3 #

42

www.testsexpert.com


vlan 1 to 2 # interface Vlan-interface1 # interface Aux1/0/0 # interface GigabitEthernet1/0/1 # interface GigabitEthernet1/0/2 portaccess vlan 2 mirroring-group 1 monitorport # interface GigabitEthernet1/0/3 portaccess vlan 2 mirroring-group 1 mirroringport both # interface GigabitEthernet1/0/4 # interface GigabitEthernet1/0/5 # interface GigabitEthernet1/0/6 # interface GigabitEthernet1/0/7 # interface GigabitEthernet1/0/8 port link-type trunk port trunk permit vlan 1 to 2 # interface GigabitEthernet1/0/9 # interface GigabitEthernet1/0/10 # interface GigabitEthernet1/0/11 stp disable port link-type trunk port trunk permit vlan all # interface NULL0 # user-interface aux 0 user-interface vty 0 4 authentication-mode scheme user privilege level 3 # return A customer has determined that an access point (AP) HP AWA2620E-AGN is not communicating correctly with an A3000-10G-PoE+ wireless switch active controller. The customer uses the port mirroring feature to examine all the packets transmitted and received by the AP. The customers

42

www.testsexpert.com


Ethernet analyzer is connected to gigabit port 1/0/2 and is mirroring gigabit port 1/0/3. The HP AWA2620E-AGN AP is receiving power from an external POE source. if the AP sends a single broadcast DHCP request packet, how many instances of the packet will the customers Ethernet trace capture and display? A. 0 B. 1 C. 2 D. 3

Answer: C Question: 9. Click the Exhibit button and view the three exhibits.

Exhibit 2: Active controller configuration Exhibit 2 Active controller

42

www.testsexpert.com


# version 5.20, Release 3111 # sysname HP # domain default enable system # telnet server enable # port-security enable # portal trap server-down # oap management-ip 192.168.0.101 slot 0 # wlan country-code US # vlan 1 # vlan 2 # domain system access-limit disable state active idle-cut disable self-service-url disable # dhcp server ip-pool 0 network 192.168.0.0 mask 255.255.255.0 gateway-list 192.168.0.200 option 43 hex 80070000 01C0A800 60 # dhcp server ip-pool 1 network 192.168.1.0 mask 255.255.255.0 gateway-list 192.168.1.200 option 43 hex 80070000 01C0A800 60 # user-group system # local-user admin password simple admin authorization-attribute level 3 service-type telnet # wlan rrm dot11a mandatory-rate 6 12 24 dot11a supported-rate 9 18 36 48 54 dot11b mandatory-rate 1 2

42

www.testsexpert.com


dot11b supported-rate 5.5 11 dot11g mandatory-rate 1 2 5.5 11 dot11g supported-rate 6 9 12 18 24 36 48 54 # wlan service-template 1 crypto ssid StudentLabs bind WLAN-ESS 0 cipher-suite ccmp security-ie rsn service-template enable # interface NULL0 # interface Vlan-interface1 ip address 192.168.0.100 255.255.255.0 # interface Vlaninterface2 ip address 192.168.1.100 255.255.255.0 # interface GigabitEthernet1/0/1 port link-type trunk port trunk permit vlan all # interface WLAN-ESS0 port link-type hybrid port hybrid vlan 1 untagged port-security port-mode psk port-security tx-key-type 11key port-security preshared-key pass-phrase simple Ay+G8lqFPsu0FxRl6KqYEWN7QkT # wlan ap APLabA model WA2620E-AGN serial-id 219801A0AL9099G00461 radio 1 service-template 1 radio enable radio 2 service-template 1 maxpower 10 radio enable # wlan ap APLabB model WA2620E-AGN serial-id 219801A0AL9099G00462 radio 1 service-template 1 radio enable radio 2

42

www.testsexpert.com


service-template 1 maxpower 10 radio enable # dhcp enable # ip route-static 0.0.0.0 0.0.0.0 192.168.0.200 # load xml-configuration # user-interface aux 0 user-interface vty 0 4 authentication-mode scheme user privilege level 3 # return Exhibit 3: Cable request Cable Report:

A local school recently added wireless services to two classrooms. One was an existing classroom and the other a newly added one. After deploying an access point (AP) to each room, the wireless users are reporting poor performance from the Lab A access point. Based on the exhibits, which action will address the performance issue? A. Swap connection from the power injectors directly to the active controller switch ports. B. Configure radio 2 on APLabB to channel 6. C. Change the cable run for APLabA to meet EIA/TIA standards. D. Configure the active controller to load balance users across both access points.

42

www.testsexpert.com


Answer: C Question: 10. Click Next or More to continue.

Click the Exhibit button and view the four exhibits.Click the Task button. Exhibit 2: Active controller configuration A3000-10G-PoE+ Wireless Switch Active Controller side configuration file # version 5.20, Release 3111 # sysname HP # domain default enable system # telnet server enable # port-security enable # portal trap server-down # oap management-ip 192.168.0.101 slot 0

42

www.testsexpert.com


# wlan country-code US # vlan 1 # vlan 2 # domain system access-limit disable state active idle-cut disable self-service-url disable # dhcp server ip-pool 0 network 192.168.0.0 mask 255.255.255.0 gateway-list 192.168.0.200 option 43 hex 80070000 01C0A800 64 # dhcp server ip-pool 1 network 192.168.1.0 mask 255.255.255.0 gateway-list 192.168.1.200 option 43 hex 80070000 01C0A800 64 # user-group system # local-user admin password simple admin authorization-attribute level 3 service-type telnet # wlan rrm dot11a mandatory-rate 6 12 24 dot11a supported-rate 9 18 36 48 54 dot11b mandatory-rate 1 2 dot11b supported-rate 5.5 11 dot11g mandatory-rate 1 2 5.5 11 dot11g supported-rate 6 9 12 18 24 36 48 54 # wlan service-template 1 crypto ssid HP_Openaccess bind WLAN-ESS 0 cipher-suite ccmp security-ie rsn service-template enable # interface NULL0 # interface Vlan-interface1 ip address 192.168.0.100 255.255.255.0

42

www.testsexpert.com


# interface Vlaninterface2 ip address 192.168.1.100 255.255.255.0 # interface GigabitEthernet1/0/1 port link-type trunk port trunk permit vlan all # interface WLAN-ESS0 port-security port-mode psk port-security tx-key-type 11key port-security preshared-key pass-phrase simple Ay+G8lqFPsu0FxRl6KqYEWN7QkT # wlan ap wa2620eagn model WA2620E-AGN serial-id 219801A0AL9099G00466 radio 1 radio 2 service-template 1 radio enable # dhcp enable # ip route-static 0.0.0.0 0.0.0.0 192.168.0.200 # load xml-configuration # user-interface aux 0 user-interface vty 0 4 authentication-mode scheme user privilege level 3 # return Exhibit 3: Switch configuration A3000-10G-PoE+ Wireless Switch Switch side configuration file sysname HP # oap management-ip 192.168.0.100 slot 0 # mirroring-group 1 local # radius scheme system # domain system # local-user admin password simple admin service-type telnet level 3 #

42

www.testsexpert.com


vlan 1 to 2 # interface Vlan-interface1 ip address 192.168.0.101 255.255.255.0 # interface Vlaninterface2 # interface Aux1/0/0 # interface GigabitEthernet1/0/1 # interface GigabitEthernet1/0/2 portaccess vlan 2 mirroring-group 1 monitorport # interface GigabitEthernet1/0/3 poe enable portaccess vlan 2 mirroring-group 1 mirroringport both # interface GigabitEthernet1/0/4 # interface GigabitEthernet1/0/5 # interface GigabitEthernet1/0/6 # interface GigabitEthernet1/0/7 # interface GigabitEthernet1/0/8 port link-type trunk port trunk permit vlan 1 to 2 # interface GigabitEthernet1/0/9 # interface GigabitEthernet1/0/10 # interface GigabitEthernet1/0/11 port link-type trunk port trunk permit vlan all # interface NULL0 # user-interface aux 0 user-interface vty 0 4 authentication-mode scheme user privilege level 3 #

42

www.testsexpert.com


Return

Based on the information provided in the four exhibits, order the steps taken by the access point HP AWA2620E-AGN and the active controller that allow the managed access point to reach operational state.

42

www.testsexpert.com


Answer:

42

www.testsexpert.com


42

www.testsexpert.com


You will not find better practice material than testsexpert PDf questions with answers on the web because it provides real exams preparation environment. Our practice tests and PDF question, answers are developed by industry leading experts according to the real exam scenario. At the moment we provides only question with detailed answers at affordable cost. You will not find comparative material elsewhere on the web at this price. We offer Cisco, Microsoft, HP, IBM, Adobe, Comptia, Oracle exams training material and many more.

We also provide PDF Training Material for: Cisco CCNA CCNP

Microsoft MCTS MCSE

HP AIS APC

CCIP CCIE CCVP CCSP CXFF CCENT CCDE

MCITP MBS MCPD MCAD MCAS MCSA MCDBA

APS ASE CSA MASE APP CSD CSE

IBM Lotus WebSpher e Mastery SOA Storage Rational Tivoli IBM DB2 IBM XML

Adobe CS4 CS3

Comptia A+ Security+

Oracle 11g DBA 10g DBA

ACE Server+ OSA 10g CS5 Network+ OCA 9i CS2 Linux+ 11i Captivate iNet+ 9i Forms Flex Project+ Weblogic CSM RFID+ Oracle 8i MX7 HTI+ PTADCE

We provide latest exams preparation material only. Contact US at: support@testsexpert.com Join Us at Twitter: www.twitter.com/testsexpert FaceBook: www.facebook.com/testsexpert

42

www.testsexpert.com

HP0-Y39 ASE Test Free  

You should always remember that it is important to be focused on your ASE HP0-Y39 progress in the HP0-Y39 examination and that you should...