Page 1

Tesmec esmecNews

06#2012 June 6th

PRODUCTS & TECHNOLOGIES LATEST INFORMATION

Mr. Mauro Milli Sales director of Trenchers Division, describes the technical specificaƟons of the new 775DT Dirt Series

NEW 775DT DIRT SERIES LIGHT DIRT AND DRAINAGE TRENCHER The new 775DT is the first “light” Tesmec trencher specifically developed to be employed in dirt excava on and drainage works. It comes to fulfill customers requirement for a trencher that must be at the same me light, maneuverable and with a low ground pressure (suitable to be employed in so and muddy terrains), but also rugged, produc ve, trustworthy

and reliable like only a Tesmec trencher can be. The new 775DT is the fusion of all there features, joining together light weight and robustness, transportability, produc vity and reliability and, last but not least, a very high user friendliness thanks to the brand new electronic control TrenchTronic.

1

Photo 1

New 775DT Dirt Series, Chainsaw


Tesmec esmecNews 06#2012 MAIN FEATURES AND ADVANTAGES Low ground pressure and high floaƟng capability: the ground pressure of the new 775DT ranges between 0.285 and 0.35 kg/cm2, thanks to its low weight (15.5 to 19 tons in opera ng condi ons, according to configura on and op ons) and to its oversized undercarriage. This feature, together with a well balanced weight distribu on, allow the machine to “float” even in very so or swampy terrains. High producƟvity: the close loop hydraulic transmission, together with the exclusive Tesmec flywheel gearbox allows the new 775DT to transmit to the digging a achment the full power delivered by its 225 HP CAT C6.6 Tier III engine. Moreover, due to the differing load nature of the excava on process (due to its discon nuous nature), the flywheel gearbox can deploy a peak torque up to three mes the torque delivered by the hydraulic motor. This is one of the reasons that make the new 775DT much more effec ve in excava on if compared to compe tor’s trenchers of the same size. Jobsite reports show producƟvity rates up to 320 m/h (2,55 m depth, 41 cm width) in normal agricultural soil. The new 775DT Chainsaw is able to dig, in one single pass only, a trench 0.61 m (24 inch) wide and 2.44 m (8 ) deep, which is usually possible only with bigger

OTHER FEAUTRES •

Til ng undercarriage (+/- 10° excursion) – this allows to have the walls of the trench always ver cal, even when working on a not properly leveled or uneven ground.

Oversized cross conveyor, to stockpile excavated material beside the trench. Conveyor dimensions are oversized, in order to guarantee the disposal of all the excavated material even at higher machine advance rate, with the maximum trench sec on and in wet ground condi ons. The conveyor is shi able and reversible, and the excavated material can be discharged alterna vely on both sides of the machine.

Manual / Automa c laser system, fully integrated into the new TrenchTronic 3.0 control. Requires only a laser transmi er (on ground) and receiver (installed on the machine boom) for full implementa on. The control system of the machine automa cally adjusts boom posi on according to the laser signal, allowing an accurate control of trench depth and trench bo om slope.

sized and powerful machines. The robustness of its mainframe, together with the high trenching effec veness make the new 775DT suitable also to be used in light rock excava on, and in sandy permafrost excava on as well. High ease of use: the brand new TrenchTronic 3.0 electronic control is very user friendly and it allows even inexperienced operators to deploy the full machine poten al and achieve maximum produc vity. The exclusive “Automa c +” autopilot developed by Tesmec con nuously monitors both the pressure of the digging circuit and the engine RPM, and con nuously adjust the advance speed of the machine according to digging condi ons. The machine automa cally operates in the “op mal” working condi ons (digging pressure and engine RPM) set by the Tesmec so ware. No setup is required by the operator, thus increasing produc vity and reducing excava on costs. High Transportability: with its low weight and small dimensions (2.55 m width, 3.08 m height, 9.26 m max transport length – 15.5-19 ton (34,171 lb - 37,500 lb) weight according to configura on and op ons) the new 775DT Chainsaw can be easily transported with no requirement for special permissions or authoriza ons, thus minimizing logis c costs.

2

Photo 2

775DT Dirt Series, Chainsaw

Photo 3

775DT Dirt Series, Chainsaw Technical Drawing

Photo 4

775DT Dirt Series, Bucket Wheel Technical Drawing


Tesmec esmecNews 06#2012 DIGGING CONFIGURATIONS New 775DT Dirt Series is available with 2 different digging a achments, both suitable for dirt excava on:

1. Chainsaw, with 8’ not sec onable boom • Max. trench depth: 8’ (244 cm) • Widths range 10” - 24” (25 - 61 cm) • Weight Range 15.5-19 ton (34,171 lb - 37,500 lb) 2. Bucket Wheel • Max. trench depth with boom on ground: 6’ 6” (198 cm) • Widths range 18”-30” (46 - 76 cm) • Weight Range 21.3-23.6 ton (47,000 lb - 52,000 lb)

3

6'5/'% Trencher

Tr

10'-2" [310cm]

'% 5/ er 6' ench

2'-1" [63cm]

"B"

6'5/'%

"A"

230

Trencher

11'-1.9" [340cm]

5'-10" [178cm] MIN 10" [25cm] MAX 24" [61cm]

2'-7" [80cm] 8'-4" [255cm]

4

34'-2" [1041cm] 32'-7" [993cm]

seg 22 seg 22

10'-2" [310cm]

seg seg

22

22

seg 22 22 seg seg

seg

9'-11" [302cm]

seg

22

22

seg

22

22

seg

6'5/'%

22 seg

22

Trencher

seg 22

seg 22 seg 22

6'5/'%

seg 22 seg

22

seg seg

22

22

Trencher 22 seg seg 22

180

22 seg seg

seg

22

22

seg seg

22

22

seg

seg 22

22

seg 22 seg

seg

22

22

seg 22 22

22 seg

seg 22

seg seg

22

seg 22

22

11'-1.9" [340cm]

5'-10" [178cm]

2'-1" [63cm]

seg

22

seg 22

6'-6" [198cm]

seg 22 22 seg

seg

2'-7" Track [80cm]

MIN 18" [46cm] MAX 30" [76cm] 8'-4" Tracks [255cm] 9'-8" [296cm]


Tesmec esmecNews 06#2012 SpecificaƟons of the new 775DT Dirt Series CHAINSAW BUCKET WHEEL

Feature • •

Standard Features

Trenching Dimensions *

Engine

OperaƟng and Transport Weight

Trencher Drive

Crawler Drive

Tracks

Hydraulic Transmission

Cross Conveyor

Dimensions

AddiƟonal Devices/OpƟons

Pressurized ROPS Cab with air condi oning, hea ng and sound suppression TrenchTronic 3.0 electronic machine control with: • operator selectable digging pressure and automa c opera on • fully automa c opera on • Electrical system: 24V • Self-leveling ( l ng) undercarriage • Track lt angle: 10° • Automa c/manual opera on • Max. Depth 8’ (244 cm) • Max. Depth with boom on ground: 6’ 6” (198 cm) • Widths range 10”-24” (25 - 61 cm) • Widths range 18”-30” (46 - 76 cm) *ask to Tesmec Trenchers Technical Department for the max width at max depth configura on. * dependent on configura on • Model: CAT C6.6 TA Tier III, Turbocharged and charge air cooled • Max gross horsepower: 225 HP (168 kW) • Max no load RPM 2200 rpm • Fuel tank capacity: 92 gal (350 l) • Fuel consump on at full load: 11.4 gal/hr (43 l/hr.) • Cooling Ra ng: adequate for 130 °F (54.4 °C) ambient air temperature • Air cleaner: dry type 2 stages with pre-cleaner and automa c dust ejec on • Weight *: 34,171-41,887 lbs (15,500-19,000 kg ) • Es mated Weight *: 47,000-52,000 lbs (21,318-23,587 kg) • Ground Pressure *: 4.05-4.98 psi (0.285- 0.35 kg/cm2) • Ground Pressure *: 5.75-6.36 psi (0.40-0.44 kg/cm2) * Dependent on configura on and op ons • Hydrosta c: one pump and two motors • Infinitely variable digging wheel speeds: 0-12 RPM • Hydrosta c: one pump and one motor capable of • Dirt cu ers: spade-type teeth transmi ng full engine horsepower • Fixed Crumbshoe: With manual quick disconnect • Flywheel gearbox • WHEEL TRUCK ASSEMBLIES • Infinitely variable digging chain speeds: 0-850 FPM • Six assemblies, two upper and One lower with (0-259 m/min.) Standard 10” diameter wheels • Tesmec designed single strand, 4” pitch chain, “K” • Modular designed “Truck-spindle and bearings” style are the same on all assemblies • Single piece, light boom for dirt & so soil • HEADSHAFT ASSEMBLY • Standard cu ers: single edge, hard surfaced cup • Alloy steel sha with Keyway, Hubs and tapered cu ers for dirt keys for mul ple bucket setups • Hardened, reversible split drive sprockets • Hydrosta c drive, planetary transmissions capable of full counter rota on with single lever steering, single lever direc on. • Infinitely variable speed: forward and reverse • Speed range 0 – 2.1MPH (0 – 3.3 km/hr) • Integral parking and service brake: spring applied, hydraulic release, wet disc brake • Overall Track Length: 11’ 2” (340 cm) • Track pad type: single grouser, chamfered edges • Track Chain Type: FL6, chain pitch: 6.3” (16 cm) • Track pad width: 31.5” (80 cm) • Pressure and flow compensated (load sensing) • Pump flow maximum: 53 GPM (201 L/min.) • Pressure se ng: 2600 PSI (180 Bar) • Oil tank capacity: 92 gal (348 l) • Oil type: Texaco 9330 - ATF Type F/G, or TESMEC approved equivalent • Pressure and flow compensated pump with dual • Pressure and flow compensated pump with dual hydraulic drive motors reversible and shi able hydraulic drive motors reversible and shi able • Belt speed: infinitely variable 0-820 FPM (0-250 m/ • Belt speed: infinitely variable 0-820 FPM (0-250 m/ min.) min.) • Discharge Direc on: right or le • Discharge Direc on: right or le • Conveyor belt width: 30” (76 cm) • Conveyor belt width: 30” (76 cm) • Conveyor length: 100” (254 cm) • Conveyor length: 100” (254 cm) • Discharge height: 36” (91.44 cm) at max. digging • Discharge height: 60” (152 cm) depth 78” (198 cm) • • • •

Transport dimensions Length: 34’ 0” (1036 cm) Width: 8’ 4” (255 cm) Height Over Cab and with 3 bo om buckets removed: 10’ 2” (310 cm)

• • • •

Transport dimensions Length with 8’ boom and crumbshoe: 31’ 5” (959 cm) Width: 8’ 4” (255 cm) Height: 10’ 2” (310 cm)

• • • • •

CE cer fied Work light package: 24V, for night use Automa c laser control system for depth control (Trimble make) Hydraulic crumbshoe Automa c Laying system for pipes, including: • gravel hopper • laying crumbshoe • guide rollers • horizontal axis reel carrier: • max. reel diameter: 5’ (152cm) • max. reel weight: 940 kg

TESMEC S.p.A - Headquarters via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel. +39.035.423 2911 - Fax +39.035.4522444 Management and Administra on Fax +39.035.4522445 Stringing Equipment Division - Fax +39.035.335664 Trencher Division www.tesmec.com - info@tesmec.it


TesmecNews-2012-06-TR-775DT-EN-Newsletter Milli  

NEW 775 DT AGRICULTURAL DRAINING MACHINE Mr. Mauro Milli, Sales director of Trenchers Division, describes the technical specifications of th...

Read more
Read more
Similar to
Popular now
Just for you