TSK eng

Page 1

COOPERATION OPPORTUNITIES FOR BUSINESSES AT

TTK UNIVERSITY OF APPLIED SCIENCES

TTK UNIVERSITY OF APPLIED SCIENCES

2014


FOR PROSPECTIVE COOPERATION PARTNER TTK University of Applied Sciences is an educational and research institution that is open to cooperation with enterprises. In addition to teaching, the University carries out various applied research projects through its five faculties: • Faculty of Architectural and Environmental Engineering • Faculty of Construction • Faculty of Mechanical Engineering • Faculty of Clothing and Textile • Faculty of Transport

COOPERATION OPPORTUNITIES FOR BUSINESSES AT

TTK UNIVERSITY OF APPLIED SCIENCES

The main role of the Technology Transfer Centre at the TTK University of Applied Sciences is to promote cooperation between private and public sector and the University. The services we offer include the following: • applied research • consultation services • testing services • product development solutions • in-service training courses

3

We consider inclusion of students in research and experiments essential, as it enriches the study process and improves the quality of studies. For cooperation partner: please take a look at the possibilities presented in this brochure. Together we can find solutions to your company’s needs.

FROM KNOWLEDGE TO TECHNOLOGY TRANSFER! Looking forward to a successful cooperation, Oliver Kallas Head of Technology Transfer Centre

TTK University of Applied Sciences Pärnu road 62, 10135 Tallinn Tel: +372 666 4542 tsk.tktk.ee www.tktk.ee

Contents: • Faculty of Architectural and Environmental Engineering • Faculty of Construction • Faculty of Mechanical Engineering • Faculty of Clothing and Textile • Faculty of Transport • In-service training courses


Applied architecture

TECHNOECOLOGY

Applied research

Applied research

• Surveying of the structural elements of historically important buildings and structures.

• Investigation and planning of waste flow in business enterprises • Conducting of environmental and waste statistical analyses for companies

Mari Jõerüüt mari@tktk.ee

FACULTY OF ARCHITECTURAL AND ENVIRONMENTAL ENGINEERING

FACULTY OF ARCHITECTURAL AND ENVIRONMENTAL ENGINEERING

ACTIVITIES OF THE FACULTY OF ARCHITECTURAL AND ENVIRONMENTAL ENGINEERING

• Preparation of architecture and planning related projects, which requires the inclusion of students analysing large amounts of information and finding the possible alternative solutions. Some examples of conducted work:

4

• Aiapass – Garden Passport The aim of the project is to offer a garden planning concept, along with proposals for the installation of functions, decorative elements and landscaping elements. The programme offers flexible and diverse solutions for different types of land plots. The structure and contents of the programme were developed by TTK architecture students and partner organisations.

5

• Bird watching tower The goal of the project was to design and construct an architectural object serving a social function. The tower was designed and built by TTK student teams, using various possibilities of TTK laboratories. • Ihaste residential area in Tartu This project involved the preparation of planning proposals and designing of apartments for the Ihaste residential area in cooperation with a partner company and the Department of Urban Planning, Land Survey and Use of Tartu.

Faculty of Architectural and Environmental Engineering technology transfer coordinator: Agu Eensaar ague@tktk.ee +372 666 4538


FACULTY OF CONSTRUCTION

FACULTY OF CONSTRUCTION

ACTIVITIES OF THE FACULTY OF CONSTRUCTION Construction related applied research and expert assessments Consulting and advising Structural research • expert assessments on loadbearing structures • experimental investigation of building structures, structural elements and models • design related consultations Martti Kiisa martti.kiisa@tktk.ee +372 666 4540, +372 529 9321 Karin Lellep karin.lellep@tktk.ee +372 666 4541, +372 525 5496

Determining the load bearing capacity of composite woodconcrete plates with the use of the mechanical testing laboratory’s test rig.

Research on building physics properties of building materials in laboratory conditions • research on the humidity and thermal properties of the building envelope Leena Paap leena@tktk.ee +372 666 4509, +372 5650 9456

6

Puidust ja betoonist komposiitplaadi kandevõime katseline määramine mehaaniliste katsetuste labori jõuraamiga

Building physics investigations at jobsites • building physics investigations of building envelopes (thermography, airtightness) • indoor climate studies Anti Hamburg anti@tktk.ee +372 666 4509, +372 5341 9274

Cost estimation and standardisation, construction economics • energy auditing • cost estimation for new buildings • cost estimation for renovating works • payback calculations and lifecycle cost evaluation Pille Hamburg pille.hamburg@gmail.com +372 666 4511, +372 5622 5735 Lauri Peetrimägi peetrimagi@tktk.ee +372 666 4502, +372 5650 4567

Research on construction materials • determining the building physical and mechanical properties of construction materials Sirle Künnapas kynnapas@tktk.ee +372 666 4511, +372 5666 5123

7


Innovative technologies and financial calculations

• consultations regarding materials used in the construction of roads • pavement design and construction, dimensioning and consulting • identification of the reasons of defects in roads and finding methods of repair • geotechnical and road construction related experimental testing using either static or dynamic loading plates or moving wheel load, with the parallel inclusion of environmental loads (humidity and freezing) • research on the use of leftover materials of mining

• use of geosynthetics in geotechnical and road construction, consultations regarding geosynthetics • creation of 3D databases for underground engineering networks • BIM – road construction information modelling

Sven Sillamäe sven@tktk.ee +372 666 4518, +372 5302 5265

FACULTY OF CONSTRUCTION

FACULTY OF CONSTRUCTION

Research on road construction

Sven Sillamäe (contact information above) Rene Pruunsild rene.pruunsild@tktk.ee +372 666 4518, +372 5335 9024 Karel Saar karel.saar@tktk.ee +372 666 4518, +372 5554 0350

Road construction economics and cost estimation • financial calculations related to road construction • cost estimation for road construction • standardisation and time management for road construction Rene Pruunsild (contact information above)

Limestone studies • assessment of limestone deposits from the point of view of suitability for application • expert analyses and assessment of limestone quality • prognosis of potential areas for limestone

8

Rein Einasto reine@tktk.ee +372 666 4508, +372 5690 4749

The road construction laboratory allows us to carry out static and dynamic testing of road constructions

Applied geodesy • consultations regarding terrestrial laser scanning • monitoring deformations Raivo Ranne raivora@tktk.ee +372 666 4508, +372 5692 7329 Tarvo Mill tarvo@tktk.ee +372 666 4508, +372 5667 9568

Faculty of Construction technology transfer coordinator: Martti Kiisa martti.kiisa@tktk.ee +372 666 4540, +372 529 9321

9


FACULTY OF MECHANICAL ENGINEERING

FACULTY OF MECHANICAL ENGINEERING

ACTIVITIES OF THE FACULTY OF MECHANICAL ENGINEERING Metal machining laboratory (manual and CNC workbenches) Services: • manufacturing samples and prototypes of parts and products • carrying out CNC workbench operator in-service training courses • precision measurements of parts and constructions using the portable coordinate measuring machine Faro PowerGage 1200 Equipment: • CNC/manual lathe Haas TL-10 (8 units) • CNC lathe Haas ST-20 • Milling Center Haas ES-5 • Milling Center Bridgeport VMC – 610 XP 3 • Manual benches (cylindrical grinder, plain grinder, milling and lathe benches)

CNC workbench laboratory.

Measuring instruments laboratory

10

Services: • detailed precision measurements using the coordinate measuring machine Tesa Micro-Hite 3D • surface finishing measurements using a portable measuring instrument • standardisation and tolerance related in-service training courses

11

Haas Training Center (CNC machining centers) Services: • in-service training courses for machine tool operators • vocational qualifications training courses for machine tool operatos Equipment: Haas SL-10 lathe

Engineering materials laboratory Services: • determination of the mechanical characteristics (suction and pressure strength, hardness) of parts • structural investigations of materials (preparation of microshavings)

Electrical engineering laboratory Services: • general electrical engineering, electrical equipment and control engineering related training courses Electrical engineering laboratory.


FACULTY OF MECHANICAL ENGINEERING

FACULTY OF MECHANICAL ENGINEERING

Metal welding technology laboratory

Coating of metals.

Services: • preparatory courses for welder’s vocational examinations. Other laboratories of Mechanical Engineering: • Hot metal working laboratory • Pneumatics-hydraulics laboratory

Coating technology laboratory Services: • restoration and strengthening of parts, resulting in a two- to threefold increase in a part´s service life • applying coatings to practically all materials • increasing the wear, heat and corrosion resistance of parts • obtaining ceramic, decorative and multi-layer (composite) coatings • obtaining coatings with a thickness from a few micro metres to 15 mm • developing restoration and strengthening technologies and, if necessary, producing working models for further applied research

12

Coating methods and equipment used: • thermal and fusion spray • plasma spray and fusion • brush electroplating • spark alloying • fluoropolymer coating • two-component polymer spray coatings

Small internal combustion engine prototype.

13

Consultiation services • resolving problems related to the automation and management of work bench hydraulic and pneumatic systems • developing new technological processes with numerical control for benches, using modern cutting tools, instru- ments and jigs • investigation and testing of plastics, ceramics, metals, and composite materials • consultation services on welding and coating processes

Faculty of Mechanical Engineering technology transfer coordinator: Karl Seegel karl@tktk.ee +372 666 4514


FROM FIBER TO PRODUCT, FROM PRODUCT TO PRODUCTION TESTING OF TEXTILE FIBRES • determination of linear density • determination of fibre crimp stability • determination of fibre, thread, and fabric silicone oil content Tests are carried out on automated equipment manufactured by Lenzing Instrument Vibrotex 400, Vibroskop 400 and SDLAtlas oil extraction equipment Rapid Oil Extraction Apparatus

TESTING OF FABRICS USING THE FOLLOWING DEVICES:

FACULTY OF CLOTHING AND TEXTILE

FACULTY OF CLOTHING AND TEXTILE

ACTIVITIES OF THE FACULTY OF CLOTHING AND TEXTILE

1. 4 HEAD MARTINDALE ABRASION AND PILLING TESTER Testing of abrasion resistance and pilling ISO 12947-1:2001 ISO 12947-2:2001 ISO 12947-4:2001 ISO 12945-2:2000

2. ELECTRONIC CROCKMETER Testing of colourfastness against rubbing ISO 105-X12:2003 ISO 105-A01 ISO 105-A03 ISO 139

14

15

Measuring fibre crimp stability and the silicon oil content of fibre.

3. FABRIC EXTENSOMETER Woven and tricot fabric elongation and elasticity EVS-EN 14704-1:2005

COMPILING AND FORMING OF TECHNICAL DOCUMENTATION FOR COMPANIES • compiling of measurement tables • lists of templates • product descriptions • technological optimisation • fashion and technical drawings • cross-sections of stages in the technical process

4.


6. PERSPIROMETER Colour fastness to perspiration ISO 105-E04

FACULTY OF CLOTHING AND TEXTILE

FACULTY OF CLOTHING AND TEXTILE

COLOUR MATCHING CABINET Light box

5. AATCC WRINKLE RECOVERY TESTER Testing of wrinkle recovery of fabric ISO 9867

16

7. ATLAS LINITEST Testing of laundering durability (fabric shrinkage, colour fastness, wrinkling) ISO 105-C06 8. AUTOFLAMM TESTER Testing of fire resistance ISO 6940 ISO 6941

17


Using a 3D body scanner

ACTIVITIES OF THE FACULTY OF TRANSPORT

FACULTY OF TRANSPORT

FACULTY OF CLOTHING AND TEXTILE

Virtual measuring of the human body

Research in the field of automotive engineering • test measurements of vehicle chassis dynamics on a chassis dynamometer • studying of the technical aspects of traffic accidents • technical inspection of motor vehicles • traffic management related studies

Research on logistics • analysis of the flow of goods and passengers • resource analysis of logistics companies • marketing: opportunities for entering a market; client satisfaction with goods/services

18

Research on automated warehouse possibilities in the logistics laboratory

Consultation services • marketing, logistics, and organisational management • occupational health and safety • measurement of vehicle driving dynamics • motor vehicle diagnostics and assessment of technical condition of vehicles • consultations related to motor vehicle design • internal combustion engine modelling and determination of external characteristics • drivers’ work, driving and rest time, use of tachographs

Faculty of Clothing and Textile technology transfer coordinator Diana Tuulik diana@tktk.ee +372 666 4562

Technology transfer coordinator for the Faculty of Transport: Marko Jets marko@tktk.ee +372 666 4516

19


In-service training courses are offered by all of the faculties and centres of TTK. In-service training courses are organised by the Open University.

Architectural and Environmental Engineering BIM training programme for architects ABC to drawing– light-shade, perspective, shading, pencil techniques ABC to composition – graphic techniques, composition on a level surface, foundations of architectural composition, volumetric composition techniques Practical exercises in graphics, reliefs and form Geoinformatics in-service training

Construction In-service training courses for construction managers Project management software Microsoft Project in-service training Time management in construction BIM – construction management BIM – construction project management BIM – construction cost estimation Architectural modelling, visualisation and energy simulations

Geodesy Geometric levelling Electronic tacheometry course Autodesk AutoCAD 2D drawing programme course

Road construction

TÄIENDUSKOOLITUSED IN-SERVICE TRAINING COURSES

IN-SERVICE TRAINING COURSES 20

TTK University of Applied Sciences is a developing and life-long learning oriented organisation, creating different opportunities for in-service training courses and retraining in all its study areas. Life-long learning is supported by today´s knowledge and practices, and takes into consideration the needs of partners and stakeholders.

Pavement calculation and construction Road construction materials Road planning Road construction and maintenance works and supervision Hydrology and surface mechanics in road construction Steel culvert bridges

Mechanical engineering and engineering materials Introductory course in computer numerical control (CNC) programming Numerical control turning center control programme training with the aid of software package CNCplus TURNING Numerical control milling center control programme training with the aid of software package CNCplus MILLING Preparatory course for the machine tool operator´s professional examination Preparatory course for welder´s professional examination Training course for the reading of mechanical engineering drawings Introductory course to pneumatic components and pneumatic control Course in the technology of metal structures production Training course in engineering materials

Automotive technology and transport logisticsa Driving instructor training Driving instructor in-service training course Professional qualification training for transport manager (transportation of goods) Professional qualification training for passenger transport manager Course for safety advisor working on a highway Course for safety advisor working on a railway Course in occupational health and safety Logistics vocational teacher training Automotive engineering vocational teacher training FIATA diploma training Railway specialists in-service training course Basics of entrepreneurship

21


IN-SERVICE TRAINING COURSES

Clothing and textile Clothing design by different product categories Training in textile materials Methods-Time Measurement (MTM) and production line balancing

General courses English, German and Russian professional language CAD design course with Solid Edge programme Preparatory course in mathematics for prospective students Preparatory course in physics for prospective students CAD design

More information regarding the in-service training courses is available at the TTK homepage http://koolitused.tktk.ee

22

23

Questions can be sent to the e-mail address: koolitus@ttk.ee or you can call us at +372 666 4551


FREEDOM SQUARE

ägi

Pä rn

ur oad

m nis Tõ

NATIONAL LIBRARY

Cinema Kosmos laia

Suur-Ameerika Ministry of Finance

Pärnu road

Liiva

Väike-Ameerika

nk

dba

Swe

TTK UNIVERSITY OF APPLIED SCIENCES Pärnu road 62

TECHNOLOGY TRANSFER CENTRE Pärnu road 62, 10135 Tallinn, Estonia tskt@tktk.ee +372 666 4542 www.tktk.ee/ettevotjale