Issuu on Google+


In order to deliver such extraordinarily high power, the power supply stage features 8 toroidal transformers, 28 - 3300 uF 105° Low ESR primary capacitors for a total of 92400 uF; 32 - 160 A TO247 Mosfets and 22 - 820 uF secondary capacitors capable of 200 V.

Direct CurrentÂŽ, 4 - 1/0 AWG cables terminated with ring terminals on the supply side and secured to the amplifier with 4 - 2,5 mm thick copper buss bars connected directly to the printed circuit board, providing the ability to transfer power between battery and amplifier with very low contact resistance.

The output stage, settable in bridged or stereo mode, features 20 - 190 A / 360 V impulsive current Mosfets: robust power and thermal dissipation without compromise.

Hertz SPL Stack SystemÂŽ stacks multiple amplifiers thanks to the 6 supplied 2 mm robust iron Brackets. The threaded mounting points on the heatsink let your SPL power plant grow without limits.

The innovative RMA (Removable Moving Assembly) provides the ability to replace the entire mobile assembly in few seconds, without removing the speaker from its mounting position, choosing the one configuration appropriate to your needs. The available mobile assemblies differ in the typology of the spiders, cone material and voice coil impedance.

Large triple magnet, for perfect control under high power, very high excursion conditions for top SPL performance.

Double Symmetrical Spiders system, it allows unprecedented control even under extreme excursions of the mobile assembly.

Aluminium voice coil wound on four layer former, for unheard of thermal and mechanical capacity.

Power transfer is carried out through screw terminals that accept high current cables to 8 AWG.

Back Vented Spider Support, for perfect symmetry under high excursion while providing increased thermal dissipation. Internally reinforced basket, protected from abrasions with high resistance paint.


Mille :: :::: ::::: : :: :::: :::: ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: 04 Hi-Power :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: 10 Hi-Energy ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: 14 Energy-Power :::::::::::::::::::::::::::::::::::::::::::::::::::::: 20 Energy :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: 24 Dieci ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: 30 Space ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: 34 SPL Monster / SPL Show ::::::::::::::::::::::::::::::::::::: 38

QUALITY STANDARDS In order to achieve the high quality standards of Hertz, we are not satisfied with testing a sampling of each production lot: every component withstands the most rigorous and exacting computerized quality control process, supervised by qualified technicians. ISO 9001:2000 certification guarantees maximum quality for maximum satisfaction.

TRADITION

INNOVATION

The constant evolution of our know-how enriches our most precious human resource: experience. Our deep knowledge of in-vehicle acoustics and in design and production procedures maintains the reference level of all Hertz products. Always.

The Hertz Team contributes considerably to the development and progress of hi-fidelity mobile audio. Their research and development program is cutting-edge, with continuous innovation a standard practice. V-Cone®, Tetolon Fiber®, Rotary High Frequency Contour®, Symmetrical Field Engine®… along with HP Manager ®, HP LINK 2®. The responsibility of being a leader.


HGR 250 HGR 300 HGR 380

87


1

HP MANAGERTM - Digital Management - is a microprocessor based system that monitors and controls the amplifier and audio system status showing this information through a cool blue LCD display.

3 HP IN dual input option offers wide interfacing possibilities: traditional pre-amplified RCA inputs and Speaker-In (OEM sources) through removable connectors. ARTTM function provides automatic turn on and off if a remote signal is not available.

2 D-CLASS technology, used in HP 1 D and HP 1 KD, is based on 120kHz sampling frequency circuitry and high power output stages realized with several TO 247- 380W MOSFETs to provide bursting dynamics and controls of multi-driver subwoofer sections.

4

10/ 11

HP LINK & HP LINK 2 TM provide the ability to link respectively two HP 1 D to achieve up to 4000W(RMS) and two HP 1 KD to get the unparalleled power of 6600W (RMS) for the ultimate performance in SPL competitions!


THE HP AMPLIFIERS PROJECT HAS BEEN DEVELOPED TO ENSURE FUNCTIONALITY AND FLEXIBILITY, HIGHLIGHTING THE HI-TECH CHARACTER. HP MANAGERTM, D-CLASS, HP LINK,… HP LINE PROVIDES A FULL SET OF INNOVATIONS OFFERING YOU THE OPPORTUNITY TO EXPERIENCE THE THRILL OF HIGH QUALITY SOUND IN THE MOBILE ENVIRONMENT.

1

2

3

4


TETOLON® SOFT DOME Maximum stiffness and the right linearity for flat, smooth frequency response even beyond damping eliminating rear wave reflections. the audible range.

1

RADIAL VENTING SYSTEM The cooling system limits OVER-SIZED REN® NEODYMIUM Small and powerful 4 2 motor structure with copper-covered pole, for maximum linearity compression and increases mobile voice coil thermal capacity, enhancing dynamics and power handling. and energy. “V” CONE The exponential profile gets very close to AERODYNAMIC DIE-CAST ALUMINIUM BASKET 5 It reduces back wave reflections and provides high mechanical the perfect one, providing exceptional dispersion. 3

14 / 15


HI-ENERGY, THE HERTZ BEST-SELLER LINE, OFFERS UNIQUE PERFORMANCE FOR A WIDE VARIETY OF APPLICATIONS. A TOP-OF-THE-LINE SOUND IN ANY CONDITION, CUTTING-EDGE TECHNOLOGY AND VERY EASY TO INSTALL. SOUND AND PERFORMANCES AT THEIR BEST.

1

2

3

4

5


HSK 130

HSK 165

2 WAY SYSTEM

2 WAY SYSTEM

200 W

250 W

INCLUDED

INCLUDED

HV 130 HV 165 HV 165L INCLUDED

HSK 163 3 WAY SYSTEM 300 W

Technical Specifications

HSK 130 HSK 165 HSK 163

16/17

Size mm (inch) Woofer

Midrange

Tweeter

HV 130

HT 25

130 (5”1/4)

25 (1”)

HV 165

HT 25

165 (6”1/2)

25 (1”)

HV 165L

165 (6”1/2)

HL 70

70 (3”)

HT 25

25 (1”)

Power Handling watt

Peak

Cont. program

Imp. ohm

Freq. Resp.

Sensitivity dB/SPL

Crossover Included

Component Adjustment

Hz

200

100

4

60 - 22k

91

3,5kHz - 12/12dB Oct.

Tweeter: +2, 0, -2 dB

250

125

4

50 - 22k

92

3,3kHz - 12/12dB Oct.

Tweeter: +2, 0, -2 dB

300

150

4

40 - 22k

92

500Hz - 6/6 dB Oct. 4,5kHz - 6/12 dB Oct.

Tw: +2, 0, -2 dB Mid: +2, 0, -2 dB


HGR 250 HGR 300 HGR 380


HCX 690

HCX 130 2 WAY COAX

3 WAY COAX

260 W

140 W

HCX 165 2 WAY COAX 200 W

HCX 130 HCX 165

THREE DIFFERENT TYPES OF MOUNTING FOR ANY GRILLE

ROTARY HIGH FREQUENCY CONTOUR

Technical Specifications

Size mm (inch) Woofer Tweeter

Supertweeter

Peak

Power Handling watt Imp.

Freq. Resp. Sens. Hz

dB / SPL

Magnet

20 (3/4”)

260

130

4

32 - 23k

94

High density flux ferrite Woofer, Neodymium REN® Tweeter/Supertweeter

Cont. program

ohm

HCX 690

6”x9”

28 (1”)

HCX 130

130 (5”1/4)

20 (3/4”)

140

70

4

60 - 22k

91

HCX 165

165 (6”1/2) 20 (3/4”)

200

100

4

50 - 22k

92

High density flux ferrite Woofer, Neodymium REN® Tweeter

Woofer / Cone

Tweeter / Dome

Damped Mesh Fibre

Tetolon fiber®


HT 20

HT 25 TWEETER

TWEETER

100 W

120 W

MOUNTING ACCESSORIES PROVIDED WITH HT 20, HT 25, HSK 130, HSK 165, HSK 163

HL 70 HV 165L

HL 70

HV 165L

CONE MIDRANGE

WOOFER

100 W

Technical Specifications

200 W

Size

Power Handling watt

HT 20

20 (3/4”)

100 @ 3.0 kHz - 12 dB Oct.

HT 25

25 (1”)

HL 70

70 (3”)

HV 165L

mm (inch)

165 (6”1/2)

Imp.

Sensitivity

dB/SPL

4

1,9k - 22k

91

180 @ 2.5 kHz - 12 dB Oct.

4

1,6k - 22k

92

100

4

200 - 14k

92

200

Cont. program

50 100

ohm

Freq. Resp.

Hz

Peak

4

40 - 5 k

92

Magnet

Dome / Cone

Tetolon fiber® Neodymium REN® Damped Mesh Fibre High density flux ferrite

Non pressed paper with cotton fiber


20 / 21


1/3


EP 5

EP 4

630 W

380 W

MAX POWER 1260 W

MAX POWER 760 W

4 CHANNEL AB CLASS AMPLIFIER

5 CHANNEL AB CLASS AMPLIFIER

Technical Specifications Channel mode Power (RMS) @ 14.4V watt @ 4Ω watt Bridge @ 4Ω watt @ 2Ω watt @ 1Ω watt @ 4/2Ω EP LINK watt @ 4Ω EP LINK watt @ 2Ω

Crossover

EP 5

EP 4

EP 2

EP 1 D

EP 2 X

5-3

4-3-2

2-1

1

2

4-3-2

60W x 4 +160W x 1 190W x 2 + 160W x 1 95W x 4 + 250W x 1

60W x 4 190W x 2 95W x 4

60W x 2 190W x 1 95W x 2

400W x 1

220W x 2 700W x 1 350W x 2

100W x 4 320W x 2 160W x 4

190Wx2(4Ω) + 250Wx1(2Ω) 95Wx2(2Ω) + 190Wx1(4Ω)

750W x 1 1000W x 1

EP 4 X

160Wx2(2Ω) + 320Wx1(4Ω)

1500W x 1 1700W x 1 Yes Yes 40 ÷ 400Hz @ 12 dB 10 ÷ 50Hz @ 24 dB 40 ÷ 400Hz @ 12 dB 40 ÷ 400Hz @ 12 dB 25 ÷ 250Hz @ 24 dB 40 ÷ 400Hz @ 12 dB 0 ÷ +12dB @ 45Hz 0 ÷ +12dB @ 45Hz 0 ÷ +12dB @ 45Hz

Yes (A/B) A/B:40 ÷ 150Hz @ 12 dB C:40 ÷ 150Hz @ 24 dB

Yes A/B:40 ÷ 400Hz @ 12 dB A/B:40 ÷ 400Hz @ 12 dB B:0 ÷ +12dB @ 45Hz

0.09 (A/B) 0.09 (C)

0.08

0.05

98dB (A/B) - 102dB (C)

98 dB

100 dB

100 (A/B) 200 (C)

130

130

240 x 450 x 54 9”15/32 x 17”23/32 x 2”5/32

240 x 350 x 54 9”15/32 x 13”25/32 x 2”5/32

4 Ω,≤ 1%THD+N,14.4V

60Wx4Ch + 160Wx1Ch

60Wx4Ch

60Wx2Ch

400Wx1Ch

220Wx2Ch

100Wx4Ch

S/N Ratio

60W Channels: 80dBA 160W Channels: 80dBA

80 dBA

81 dBA

75 dBA

77 dBA

76 dBA

Bypass Hi-pass Hz Lo-pass Hz Boost Hz

THD @ 4 Ohm 1kHz% 100Hz%

S/N Ratio dBA weighed @ 1V

Damping Factor 1kHz @ 4Ω 100Hz @ 4Ω

Size mm inch

RMS Power

Ref. 1W Output

22 / 23

0.15 100 dB

100

Yes A/B:40 ÷ 400Hz @ 12 dB A/B:40 ÷ 400Hz @ 12 dB B:0 ÷ +12dB @ 45Hz

0.05

0.08

100 dB

98 dB

130

130

240 x 230 x 54 240 x 450 x 54 240 x 350 x 54 9”15/32 x 9”1/16 x 2”5/32 9”15/32 x 13”25/32 x 2”5/32 9”15/32 x 17”23/32 x 2”5/32

240 x 500 x 54 9”15/32 x 19”31/32 x 2”5/32


EP 2

EP 1 D

190 W

1000 W

MAX POWER 380 W

MAX POWER 2000 W

2 CHANNEL AB CLASS AMPLIFIER

EP 2 X

MONO D-CLASS AMPLIFIER

EP 4 X

2 CHANNEL AB CLASS AMPLIFIER

4 CHANNEL AB CLASS AMPLIFIER

700 W

640 W

MAX POWER 1400 W

MAX POWER 1280 W

RVC Sub A OPTIONAL


1 V-CONE The exponential profile gets very close to the perfect one, providing exceptional dispersion.

4

2 ULTRA FLAT Small size and shallow depth for installations without limits.

5

NEODYMIUM REN速 Small and powerful motor structure with copper-covered pole, for maximum linearity and energy. 3

24 / 25

NON-PRESSED PAPER V-CONE on the EV 165 L, for the best energy trasfer at low end and mid frequencies.

RHFC 速 TWEETER Provides the ability of orienting tweeter direction according to the listening point, for the benefit of the high frequencies.


IDEAL TO UPGRADE FACTORY OEM SYSTEMS, THE ENERGY LOUDSPEAKERS PROVIDE POWERFUL AND HI-FIDELITY SOUND REPRODUCTION, THANKS TO THE EXCELLENT TIMBER BALANCE AND ADD TO THIS, UNIQUE VERSATILITY. THE ENERGY LINE INCLUDES 26 COMPONENTS FOR A PRODUCT RANGE PERFECT FOR ANY LISTENING AND INSTALLATION NEED.

1

2

3

4

5


26 /27


Technical Specifications

Speaker Size

Power Handling Imp. Freq. watt ohm Resp. Peak

Cont. progr.

EBX 200 R

200 (8”)

500

250

4

30 - 400

91

EBX 250 R

250 (10”)

700

350

4

28 - 300

93

EBX 300 R

300 (12”)

1000

500

4

25 - 250

94

mm (inch)

Hz

Sens.

BxLxH

dB/SPL mm/inch

Magnet Cone

390 x 310 x 288 Single 15”3/8 x 12”1/4 x 11”3/8 magnet, high 465 x 365 x 338 18”5/16 x 14”3/8 x 13”5/16 density flux 545 x 387 x 400 ferrite 21”1/2 x 15”1/4 x 15”3/4

Waterrepellent pressed paper


ECX 87

ECX 100

ECX 130

ECX 165

60 W

80 WATTS

100 W

140 W

2 WAY COAX

2 WAY COAX

2 WAY COAX

2 WAY COAX

INCLUDED

ECX 570

ECX 690

140 W

200 W

2 WAY COAX

Technical Specifications

3 WAY COAX

Size mm (inch) Woofer

Tweeter

ECX 690

6”x9”

40 (11/2”)

ECX 87

87 (3”1/2)

ECX 100

Power Handling watt

Supertweeter Peak

Imp.

ohm

Freq. Resp. Hz

dB / SPL

Sensitivity

200

100

4

40 - 23k

95

15 (19/32”)

60

30

4

120 - 21k

87

100 (4”)

20 (3/4”)

80

40

4

70 - 23k

88

ECX 130

130 (5”1/4)

20 (3/4”)

100

50

4

65 - 23k

91

ECX 165

165 (6”1/2)

20 (3/4”)

140

70

4

60 - 23k

93

ECX 570

5”x7”

20 (3/4”)

140

70

4

60 - 23k

93

28 / 29

15 (19/32”)

Cont. program

Magnet

Woofer / Cone

Tweeter / Dome

High density flux ferrite

Waterrepellent Tetolon fiber® paper

ECX ECX ECX ECX

100 130 165 570


ET 20

EM 100 CONE MIDRANGE

TWEETER 100 W

EV 130 WOOFER

150 W

EV 165 WOOFER 140 W

160 W

MOUNTING ACCESSORIES PROVIDED WITH ESK 130, ESK 165, ESK 165L, ESK 570, ESK 163L

ET 20

EM 100

EM 100 EV 130 EV165 EV 165 L

EV 165 L WOOFER 140 W

Technical Specifications

Size

mm (inch)

Power Handling

watt

Peak

Cont. program

Imp.

Freq. Resp.

Sensitivity

4

2k - 23k

91

ohm

Hz

dB/SPL

ET 20

20 (3/4”)

EM 100

100 (4”)

150

75

4

400 - 14,5k

90

EV 130

130 (5”1/4)

100

50

4

65 - 8k

91

100 W @ 3,5 kHz - 12 dB Oct.

EV 165

165 (6”1/2)

140

70

4

60 - 8k

93

EV 165L

165 (6”1/2)

140

70

4

50 - 6k

92

Magnet

Neodymium REN

Cone Tetolon fiber®

Water-repellent paper High density flux ferrite Water-repellent non pressed paper


DIECI LOUDSPEAKERS OFFER ADVANCED TECHNOLOGY FOR A POWERFUL SOUND. THEIR EFFICIENCY MAKES THEM EASY TO BE DRIVEN EVEN AT LOW POWERS. DIECI LINE HAS GIVEN LIFE TO A NEW REFERENCE WITHIN THE VALUE-ORIENTED MARKET.

1 V-CONE The exponential profile gets very close to the perfect one, providing exceptional dispersion.

RUBBER COVER Silicon rubber protection of the powerful motor assembly.

2

MYLAR DOME Together with REN速 Neodymium motor, ferrofluid cooling, and housing with unique design: a high efficiency, with very good off-axis response. 3

30 / 31

1

2


3


SYSTEM DSK 130 2 WAY SYSTEM

DCX 690 3 WAY COAXIAL

DSK 165 2 WAY SYSTEM

120 W

160 W

180 W

INCLUDED

DCX 100 2 WAY COAXIAL

DCX 130 2 WAY COAXIAL

60 W

Technical Specifications

INCLUDED

DCX 165 2 WAY COAXIAL

80 W

Size mm (inch) Woofer Tweeter

Supertweeter

Power Handling watt Peak

Cont. program

120

60

160

80

120 W

Imp.

ohm

Freq. Resp. Sensitivity

60 - 21k

91

3,5KHz - 6/12dB Oct.

4

50 - 21k

93

3,5KHz - 6/12dB Oct.

15 (19/32”)

DSK 165

DV 165

165 (6”1/2)

DT 16

15 (19/32”)

DCX 690

6”x 9”

60 (2” )

180

90

4

45 - 22k

95

DCX 100

100 (4”)

15 (19/32”)

60

30

4

70 - 21k

90

DCX 130

130 (5”1/4)

15 (19/32”)

80

40

4

60 - 21k

91

DCX 165

165 (6” )

15 (19/32”)

120

60

4

60 - 21k

93

15 (19/32”)

80W@3,5KHz - 12dB Oct.

4

3k - 21k

93

DT 16

32 / 33

1/2

Crossover included

4

130 (5”1/4)

15 (19/32”)

Cone

dB/SPL

DV 130

1/2

Magnet

Hz

DSK 130

DT 16

INCLUDED

High density flux ferrite

Waterrepellent pressed paper

Neodymium

Mylar

3,5KHz - 12dB Oct.


COMP DT 16 TWEETER

DS 300

DS 250

SUBWOOFER

SUBWOOFER

80 W

300 W

300 W

MOUNTING ACCESSORIES PROVIDED WITH DT 16, DSK 130, DSK 165

GRILLE PROVIDED WITH DS 250, DS 300

DT 16

DV 130 DV 165

DBX 250 SUB BOX 300 W

Technical Specifications

mm (inch)

Size

Power Handling watt Peak

Cont. program

ohm

Hz

Freq. Resp.

Sensitivity dB/SPL

mm

DS 250

250 (10”)

300

150

4

32 - 400

90

38

DS 300

300 (12”)

300

150

4

28 - 300

92

38

Technical Specifications

mm (inch)

DBX 250

Imp.

Voice Coil

Magnet

Cone

X-mech

Hight density flux ferrite

Waterrepellent pressed paper

mm

10 10

Speaker Size

Power Handling watt Peak

Cont. program

ohm

Impedance Freq. Resp. Hz

Sensitivity dB/SPL

mm / inch

BxLxH

Magnet

Cone

250 (10”)

300

150

4

32 - 400

90

450 x 257 x 327 17”3/4x10”1/8x12”7/8

Hight density flux ferrite

Water-repellent pressed paper


34 / 35


SPACE K6 2 WAY SYSTEM

SPACE K8 2 WAY SYSTEM

250 W

300 W

INCLUDED

INCLUDED

INCLUDED

INCLUDED

SPACE K6L 2 WAY SYSTEM

2 WAY SYSTEM

200 W

250 W

Technical Specifications

SPACE K6 SPACE K8 SPACE K6L SPACE K8L

36 / 37

SPACE K8L

Size mm (inch) Woofer

Tweeter

SPACE 6

SPACE 1

165 (6”1/2)

28 (1”1/8)

SPACE 8

SPACE 1

200 (8”)

28 (1”1/8)

SPACE 6L

SPACE 1

165 (6” )

28 (1” )

SPACE 8L

SPACE 1

200 (8”)

28 (1”1/8)

1/2

1/8

Power Handling watt Peak

Cont. program

Imp. ohm

Freq. Resp. Hz

250

125

4

45 - 25k

300

150

4

40 - 25k

200

100

4

45 - 25k

250

125

4

40 - 25k

Crossover Included

Component Adjustment

Sound Control

2,8kHz -12/12dB Oct.

Tweeter: +2, 0, -2 dB

BSC®


SPACE 1 TWEETER 180 W

Big Chamber

SPACE K6

SPACE K8L

SPACE K8

SPACE 6

SPACE K6L

SPACE 8

Small Chamber

SPACE 8 WOOFER

Mounting accessories provided with Space 1, Space 6K, Space 8K, Space K6L, Space K8L

260 W

INCLUDED

INCLUDED

SPACE 6 WOOFER 200 W

Technical Specifications

Size

Power Handling watt

mm (inch)

Peak

Cont. program

Imp. ohm

Freq. Resp.

Sensitivity

Hz

dB/SPL

SPACE 1

BIG CHAMBER

28 (1”1/8)

180W@1.8kHz - 12dB Oct

4

950 - 25k

91

SPACE 1

SMALL CHAMBER

28 (1”1/8)

180W@2.0kHz - 12dB Oct

4

1,3k - 25k

91

SPACE 6

165 (6”1/2)

200

100

4

45 - 5,5k

91

SPACE 8

200 (8”)

260

130

4

40 - 4,8k

92

Magnet

Membrane

Tetolon® Neodymium REN®

Waterrepellent paper


Progetto1

18-12-2008

12:01

Pagina 1

SPL MONSTER AND SPL SHOW LINE WERE DESIGNED ACCORDING TO THE SPECIFIC NEEDS OF THOSE TEAMS WHO TAKE PART IN SPL COMPETITIONS AND THAT WANT TO DOMINATE. SUBWOOFERS AND AMPLIFIER FOR THE BEST PERFORMANCE IN ANY APPLICATION.

38 / 39


Progetto1

18-12-2008

12:01

Pagina 2


SPLSUB M 12 UNLIMITED SUBWOOFER

M 15 UNLIMITED SUBWOOFER

8000 W

8000 W

Mobile Group Specifications

MG 12 2x1.2s2 MG 12 2x1.0s2 MG 12 2x1.0s4 MG 12 2x1.5s2 MG 12 2x1.5s4

MG 12 MG 15 MOBILE GROUP

NPP* Mob. Group KEV Mob. Group KEV Mob. Group KEV Mob. Group KEV Mob. Group

MG 15 2x1.2s2 NPP* Mob. Group MG 15 2x1.0s2 KEV Mob. Group MG 15 2x1.0s4 KEV Mob. Group MG 15 2x1.5s2 KEV Mob. Group MG 15 2x1.5s4 KEV Mob. Group

Cone

DSS

Paper Cone

Nominal Impedance X-mech D Xmax Re Ω Ω mm mm mm

Fs Hz

Le Le Vas mH@1kHz mH@10kHz l

Mms Cms BL Qts Qes Qms Spl g mm/N T-m dB

2 spiders

1.2 + 1.2

28

245

10

2,1

39

1,16

0,38

21,70 236,7

0,07 21,58 0,25 0,26 5,08 95

Kevlar sandwich 2 spiders

1.0 + 1.0

25,5

245

7,5

1,9

44

1,00

0,33

16,90 246,2

0,05 19,71 0,30 0,32 5,16 95

Kevlar sandwich 4 spiders

1.0 + 1.0

25,5

245

7,5

1,9

62

1,00

0,33

8,30

261,6

0,03 20,39 0,44 0,48 6,80 94,5

Kevlar sandwich 2 spiders

1.5 + 1.5

26,5

245

8,5

2,8

43

1,30

0,42

19,40 237,8

0,06 23,38 0,30 0,32 5,00 93,5

Kevlar sandwich 4 spiders

1.5 + 1.5

26,5

245

8,5

2,8

63

1,30

0,42

7,90

0,02 23,81 0,49 0,52 6,75 92,5

262,0

2 spiders

1.2 + 1.2

28

320

10

2,1

36

1,14

0,38

61,00 295,3

0,07 21,87 0,28 0,29 5,38 98

Kevlar sandwich 2 spiders

1.0 + 1.0

25,5

320

7,5

1,9

42

1,00

0,33

48,10 268,8

0,05 19,95 0,32 0,35 5,61 98,5

Kevlar sandwich 4 spiders

1.0 + 1.0

25,5

320

7,5

1,9

61

1,00

0,33

20,00 309,7

0,02 20,68 0,49 0,53 6,85 97,5

Kevlar sandwich 2 spiders

1.5 + 1.5

26,5

320

8,5

2,8

43

1,30

0,42

47,10 265,7

0,05 23,36 0,34 0,36 5,23 97

Kevlar sandwich 4 spiders

1.5 + 1.5

26,5

320

8,5

2,8

60

1,30

0,42

21,20 304,7

0,02 24,37 0,49 0,54 6,50 96

Paper Cone

* Factory provided mobile group

Technical Specifications

Size

Power Handling watt Peak

Cont. program

ohm

Imp.

Freq. Resp. Hz

dB/SPL

mm

M 12 UNLIMITED

300 (12”)

8000

2000

1.2+1.2

32 - 1000

95

75

M 15 UNLIMITED

380 (15”)

8000

2000

1.2+1.2

21 - 700

98

75

40 / 41

mm (inch)

Sensitivity

Voice Coil

Magnet

Cone

Double magnet, high density flux ferrite

Non-pressed paper

X-mech mm

28 28


AMP MP 15 K UNLIMITED D-CLASS SPL AMPLIFIER

15000 W

Technical Specifications

MP 15 K UNLIMITED 2-1

Channel mode watt @ 4Ω watt @ 2Ω watt @ 1Ω

Stereo 1000W x 2 2000W x 2 3000W x 2

Bridge 4000W x 1 6000W x 1 8000W x 1

watt @ 4Ω watt @ 2Ω watt @ 1Ω

1500W x 2 2800W x 2 4500W x 2

5600W x 1 9000W x 1 12000W x 1

watt @ 4Ω watt @ 2Ω watt @ 1Ω

1800W x 2 3400W x 2 5500W x 2

6800W x 1 11000W x 1 15000W x 1

watt @ 4Ω watt @ 2Ω watt @ 1Ω

2300W x 2 4400W x 2 6100W x 2

8800W x 1 12000W x 1 15500W x 1

Power (RMS) @ 12V

Power (RMS) @ 14.4V

Power (RMS) @ 16V

Power (RMS) @ 18V

Crossover Lo-pass Hz Subsonic Output Mode Chain Mode

THD @ 4 Ohm 100Hz%

S/N Ratio dBA weighed @ 1V

Damping Factor 100Hz @ 4Ω

Size mm inch

OFF / Lo-pass: 10 ÷ 50 Hz @ 24 dB/Oct. OFF / Hi-pass: 10 ÷ 50 Hz @ 24 dB/Oct. Stereo By-pass / Bridge / L + R Mix Master / Slave 0,15 69 > 950 323 x 830 x 68,5 12”3/4 x 32”11/16 x 2”3/4

BRACKETS INCLUDED


SUB COMP SX 250D

SX 300D

2400 W

3200 W

SUBWOOFER

SUBWOOFER

SX 380D SUBWOOFER 4000 W

HGR 250 HGR 300 HGR 380 OPTIONAL GRILLE

DOUBLE VOICE COIL

Technical Specifications

SX 250D

Size

Power Handling watt Peak

Cont. program

Imp.

Freq. Resp.

Sensitivity dB/SPL

mm

250 (10”)

2400

600

2+2

34 - 800

90,5

65

mm (inch)

ohm

Hz

Voice Coil

SX 300D

300 (12”)

3200

800

2+2

28 - 700

91

65

SX 380D

380 (15”)

4000

1000

2+2

25 - 600

92

65

42 / 43

Magnet

Cone

Triple magnet, high density flux ferrite

Pressed Paper Cone

X-mech mm

23 23 23


In order to deliver such extraordinarily high power, the power supply stage features 8 toroidal transformers, 28 - 3300 uF 105° Low ESR primary capacitors for a total of 92400 uF; 32 - 160 A TO247 Mosfets and 22 - 820 uF secondary capacitors capable of 200 V.

Direct CurrentÂŽ, 4 - 1/0 AWG cables terminated with ring terminals on the supply side and secured to the amplifier with 4 - 2,5 mm thick copper buss bars connected directly to the printed circuit board, providing the ability to transfer power between battery and amplifier with very low contact resistance.

The output stage, settable in bridged or stereo mode, features 20 - 190 A / 360 V impulsive current Mosfets: robust power and thermal dissipation without compromise.

Hertz SPL Stack SystemÂŽ stacks multiple amplifiers thanks to the 6 supplied 2 mm robust iron Brackets. The threaded mounting points on the heatsink let your SPL power plant grow without limits.

The innovative RMA (Removable Moving Assembly) provides the ability to replace the entire mobile assembly in few seconds, without removing the speaker from its mounting position, choosing the one configuration appropriate to your needs. The available mobile assemblies differ in the typology of the spiders, cone material and voice coil impedance.

Large triple magnet, for perfect control under high power, very high excursion conditions for top SPL performance.

Double Symmetrical Spiders system, it allows unprecedented control even under extreme excursions of the mobile assembly.

Aluminium voice coil wound on four layer former, for unheard of thermal and mechanical capacity.

Power transfer is carried out through screw terminals that accept high current cables to 8 AWG.

Back Vented Spider Support, for perfect symmetry under high excursion while providing increased thermal dissipation. Internally reinforced basket, protected from abrasions with high resistance paint.



Hertz Totality Catalogue 2009