Page 1

TQ SMD

TESTING

LOW-PROFILE SURFACE-MOUNT RELAY

TQ SMD RELAYS

FEATURES 14 .551

9 .354 5.6 .220

mm inch

• Low-profile: 6 mm .236 inch (Tape height: max. 6.5 mm .256 inch) • Tape and reel package is available as standard packing style • Surge withstand between contacts and coil: 2,500 V • Breakdown voltage between contacts and coil: 1,500 V • Capacity: 2 A • High sensitivity: 2 Form C; 140 mW power consumption (Single side stable type)

SPECIFICATIONS Contact

Characteristics

Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1 A) Contact material Nominal switching capacity (resistive load) Max. switching power (resistive load) Rating Max. switching voltage Max. switching current Min. switching capacity ❇1 Single side stable Nominal operating power

1 coil latching 2 coil latching

Expected life (min. operations)

Mechanical (at 180 cpm) 2 A 30 V DC resistive Electrical 1 A 30 V DC (at 20 cpm) resistive 0.5 A 125 V AC resistive

2 Form C 75 mΩ Gold-clad silver alloy 2 A 30 V DC, 0.5 A 125 V AC 60 W, 62.5 VA 220 V DC, 125 V AC 2A 10 µA 10 mV DC 140 mW (1.5 to 12 V DC) 200 mW (24 V DC) 300 mW (48 V DC) 70 mW (1.5 to 12 V DC) 100 mW (24 V DC) 140 mW (1.5 to 12 V DC) 200 mW (24 V DC) 108

Initial insulation resistance*1 Between open contacts Initial breakdown Between contact sets voltage Between contact and coil Between open contacts Initial surge (10×160 µs) voltage Between contacts and coil (2×10 µs) Temperature rise*2 (at 20°C) Operate time [Set time]*3 (at 20°C) Release time [Reset time]*4 (at 20°C) Functional*5 Shock resistance Destructive*6 Functional*7

105 Vibration resistance

Destructive

2×105 105

Note: ❇1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. (SX relays are available for low level load switching [10 µA 1 mV DC – 10 mA 10 V DC])

Conditions for operation, transport and storage*8 (Not freezing and condensing at low temperature) Unit weight

Ambient temperature Humidity

Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as "Initial breakdown voltage" section. *2 By resistive method, nominal voltage applied to the coil; contact carrying current: 2 A. *3 Nominal voltage applied to the coil, excluding contact bounce time. *4 Nominal voltage applied to the coil, excluding contact bounce time without diode. *5 Half-wave pulse of sine wave: 6 ms; detection time: 10 µs *6 Half-wave pulse of sine wave: 6 ms *7 Detection time: 10 µs *8 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT

All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.

Min. 1,000 MΩ (at 500 V DC) 1,000 Vrms for 1 min. (Detection current: 10 mA) 1,500 Vrms for 1 min. (Detection current: 10 mA) 1,500 Vrms for 1 min. (Detection current: 10 mA) 1,500 V (FCC Part 68) 2,500 V (Telcordia) Max. 50°C Max. 4 ms (Approx. 2 ms) [Max. 4 ms (Approx. 2 ms)] Max. 4 ms (Approx. 1 ms) [Max. 4 ms (Approx. 2 ms)] Min. 750 m/s2 {75 G} Min. 1,000 m/s2 {100 G} 200 m/s2 {20G}, 10 to 55 Hz at double amplitude of 3.3 mm 294 m/s2 {30G}, 10 to 55 Hz at double amplitude of 5 mm –40°C to +85°C*3 –40°F to +185°F 5 to 85% R.H. Approx. 2 g .071 oz


TQ SMD ORDERING INFORMATION Ex. TQ Contact arrangement 2: 2 Form C

2

SA

Surface-mount availability SA: Standard surface-mount SA: terminal type SL : High connection reliability SA: surface-mount terminal type SS: Space saving surfaceSA: mount terminal type

L

3V

Z

Operating function

Coil voltage (DC)

Nil: Single side stable L: 1 coil latching L2: 2 coil latching

1.5, 3, 4.5, 5, 6, 9, 12, 24, 48* V

Packing style Nil: Tube packing Z: Tape and reel packing (picked from the 6/7/8/9/10-pin side)

*48 V coil type: Single side stable only Notes: 1. Tape and reel (picked from 1/2/3/4/5-pin side) is also available by request. Part No. suffix “-X” is needed when ordering. (ex.) TQ2SA-3V-X 2. Tape and reel packing symbol “-Z” or “-X” are not marked on the relay.

TYPES 1. Single side stable Nominal voltage, V DC

Pick-up voltage, V DC (max.)

Drop-out voltage, V DC (min.)

1.5 3 4.5 5 6 9 12 24 48

1.13 2.25 3.38 3.75 4.5 6.75 9 18 36

0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4 4.8

Nominal voltage, V DC

Set voltage, V DC (max.)

Reset voltage, V DC (max.)

1.5 3 4.5 5 6 9 12 24

1.13 2.25 3.38 3.75 4.5 6.75 9 18

1.13 2.25 3.38 3.75 4.5 6.75 9 18

Part No.

Nominal voltage, V DC

Set voltage, V DC (max.)

Reset voltage, V DC (max.)

TQ2S❍-L2-1.5 V TQ2S❍-L2-3 V TQ2S❍-L2-4.5 V TQ2S❍-L2-5 V TQ2S❍-L2-6 V TQ2S❍-L2-9 V TQ2S❍-L2-12 V TQ2S❍-L2-24 V

1.5 3 4.5 5 6 9 12 24

1.13 2.25 3.38 3.75 4.5 6.75 9 18

1.13 2.25 3.38 3.75 4.5 6.75 9 18

Part No. TQ2S❍-1.5 V TQ2S❍-3 V TQ2S❍-4.5 V TQ2S❍-5 V TQ2S❍-6 V TQ2S❍-9 V TQ2S❍-12 V TQ2S❍-24 V TQ2S❍-48 V

Nominal operating current, mA (±10%) 93.8 46.7 31 28.1 23.3 15.5 11.7 8.3 6.3

Coil resistance, Ω (±10%)

Nominal operating power, mW

Max. allowable voltage, V DC

16 64.3 145 178 257 579 1,028 2,880 7,680

140 140 140 140 140 140 140 200 300

2.2 4.5 6.7 7.5 9 13.5 18 36 57.6

Coil resistance, Ω (±10%)

Nominal operating power, mW

Max. allowable voltage, V DC

32 128.6 289.3 357 514 1,157 2,057 5,760

70 70 70 70 70 70 70 100

2.2 4.5 6.7 7.5 9 13.5 18 36

Coil resistance, Ω (±10%)

Nominal operating power, mW

Max. allowable voltage, V DC

16 64.3 145 178 257 579 1,028 2,880

140 140 140 140 140 140 140 200

2.2 4.5 6.7 7.5 9 13.5 18 36

2. 1 coil latching Part No. TQ2S❍-L-1.5 V TQ2S❍-L-3 V TQ2S❍-L-4.5 V TQ2S❍-L-5 V TQ2S❍-L-6 V TQ2S❍-L-9 V TQ2S❍-L-12 V TQ2S❍-L-24 V

Nominal operating current, mA (±10%) 46.9 23.3 15.6 14 11.7 7.8 5.8 4.2

3. 2 coil latching Nominal operating current, mA (±10%) 93.8 46.7 31 28.1 23.3 15.5 11.7 8.3

❍: For each surface-mounted terminal variation, input the following letter. SA type: A, SL type: L, SS type: S Notes: 1. Specified value of the pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse. 2. Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. Tape and reel: 500 pcs.; Case: 1,000 pcs. 3. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.

All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.


TQ SMD DIMENSIONS

mm inch

SA type 9 .354

14 .551

2.54 .100

0.5 .020

0.25 .010

4.9 .193

5.6 .220

Recommendable mounting pad (Top view) SA type 1 .039

7.62 .300 11.5±0.5 .453±.020

0.2 .008

Schematic (Top view) •Single side stable (Deenergized condition) −

10 9

8

7

6

1

3

4

5

2.54 .100

+

2 .079

2.94 .116

9.56 .376

SL type

2

Direction indication* *Orientation stripe located on top of relay.

9 .354

14 .551

0.25 .010

4.9 .193

Max. 7.5 .295 2.54 .100

0.3 .012

For glue-pad

•1-coil latching (Reset condition)

14 .551

+

SL type 7.62 .300 11.5±0.5 .453±.020

0.5 .020

1 .039

2.54 .100

9.56 .376

1

3

4

5

2

*Orientation stripe located on top of relay.

SS type

7.62 .300 9.3±0.5 ±.020

0.5 .020

6

•2-coil latching (Reset condition)

0.25 .010

4.9 .193

Max. 7.5 .295

7

Direction indication*

9 .354

14 .551

8

2.54 .100

2.94 .116

SS type

10 9

1 .039

General tolerance: ±0.3 ±.012

10 9

8

7

+

2.54 .100

+

1.84 .072

1

8.46 .333

6

2

3

4

5

Direction indication* *Orientation stripe located on top of relay.

Tolerance: ±0.1 ±.004

REFERENCE DATA 1. Maximum switching capacity

2. Life curve

3. Mechanical life (mounting by IRS method)

Ratio against the rated voltage, %V

Tested sample: TQ2SA-12V, 10 pcs.

No. of operations, × 104

Switching current, A

3.0 2.0

100

DC resistive load

1.0 AC resistive load

0.5 0.4 0.3

50 30

125V AC resistive load

30V DC resistive load

20 10

0.2

100 90 80 Pick-up voltage

70

Max.

60

Min.

50 40 Drop-out voltage

30

Max.

20 Min.

10 0

20 30

0

50 100 200 300 Contact voltage, V

0

1.0 2.0 Switching current, A

IRS 1

10 100 1,000 10,000 4 No. of operations, ×10

4.-(2) Electrical life (0.5 A 125 V AC resistive load)

Tested sample: TQ2SA-12V, 6 pcs. Operating frequency: 20 cpm Change of pick-up and drop-out voltage (mounting by IRS method)

Tested sample: TQ2SA-12V, 6 pcs Operating frequency: 20 cpm Change of pick-up and drop-out voltage (mounting by IRS method)

Change of contact resistance (mounting by IRS method) 100

90

90

80 Pick-up voltage

70 60

Max. Min.

50 40

Drop-out voltage

30 Max.

20

Min.

10 0

IRS 1

2

3 4 5 6 7 8 9 10 No. of operations, ×104

100

80 70 60 50

Max.

40 Min.

30 20

90 80 Pick-up voltage

70 60

Max. Min.

50 40

Drop-out voltage

30

Max.

20

Min.

10

10 0

Ratio against the rated voltage, %V

100

Contact resistance, mΩ

Ratio against the rated voltage, %V

4.-(1) Electrical life (2 A 30 V DC resistive load)

IRS 1

2

3 4 5 6 7 8 9 10 No. of operations, ×104

0

IRS 1

All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.

2

3 4 5 6 7 8 9 10 No. of operations, ×104


TQ SMD Change of contact resistance (mounting by IRS method)

5. Coil temperature rise

6. Operate/release time

Tested sample: TQ2SA-12V, 6 pcs. Point measured: Inside the coil Ambient temperature: 25°C 77°F

Tested sample: TQ2SA-12V, 6 pcs.

100

70

70 60 50

Max.

40 Min.

30

60

5

2A

Coil voltage DC 12V type DC 48V type

0A

50 2A

40

0A

30 20

20

Operate and release time, ms

80

Temperature rise, °C

Contact resistance, mΩ

90

0

IRS 1

2

3

4

5

6

7

8

No. of operations, ×10

0

9 10

4 Max. Min.

3

2 Max. Min.

1

10

10

Operate time Release time

0

100 110 120 130 140 150 Coil applied voltage, %V

4

70

80

90 100 110 120 Coil applied voltage, %V

8. Distribution of set and reset voltage

9. Ambient temperature characteristics

Tested sample: TQ2SA-12V, 50 pcs.

Tested sample: TQ2SA-L-12V, 30 pcs.

Tested sample: TQ2SA-12V, 5 pcs.

Set voltage Reset voltage

; @   @   ; @   ; ;@;@;@;@;@;@;@

25

0

Quantity

–40 –20

15

0

; ; ;;;;; ;;;;;

10

20

;;;;; ;;;;;; ; ;

;@;@;@;@;@;@;@ ; @   @   ; @   ; Drop-out voltage

20

;;

30

Quantity

;;

30 Pick-up voltage

10

Rate of change, %

7. Distribution of pick-up and drop out voltage

40

20

Pick-up voltage x

Drop-out voltage 20 40 60 80 Ambient temperature, °C –20

5

0

10 20 30 40 50 60 70 80 90 100 Ratio against the rated voltage, %V

–40

10 20 30 40 50 60 70 80 90 100 Ratio against the rated voltage, %V

10. Distribution of contact resistance

11.-(1) High-frequency characteristics

11.-(2) High-frequency characteristics

Tested sample: TQ2SA-5V, 30 pcs. (30 × 4 contacts)

Isolation characteristics

Insertion loss characteristics

50 10 9 8 7 6

1 2 3 4 5

Isolation, dB

Terminal Nos. 2-3, 8-9

;

Quantity

(TOP VIEW)

;;;;;;;; ;;;;;; 30

20

10

0

20

Insertion loass, dB

;;;;;;;; ;;; Terminal Nos. 3-4, 7-8

;;;

40

– +

100

50

0.4 0.2 10

30 40 50 Contact resistance, mΩ

100 Frequency, MHz

1,000

12.-(2) Malfunctional shock (latching)

Tested sample: TQ2SA-12V, 6 pcs

Tested sample: TQ2SA-L2-12V, 6 pcs.

Z X

X' Y 1000m/s 2

Deenergized condition Energized condition

Z' Y Y'

Z X

X' Y 1000m/s 2

Reset condition Set condition

X 1000m/s2

Z' 1000m/s 2

X 1000m/s2

Z' 1000m/s 2

1000m/s 2 Z

1000m/s 2 X'

1000m/s 2 Z

1000m/s 2 X'

1000m/s 2 Y'

0.8 0.6

12.-(1) Malfunctional shock (single side stable)

Z' Y Y'

1.0

1000m/s 2 Y'

All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.

10

100 Frequency, MHz

1,000


TQ SMD Tested sample: TQ2SA-12V, 6 pcs.

ON

0 ON

–10

OFF OFF

10 Drop-out voltage 0

OFF

–10 0

ON

10 Pick-up voltage 0

ON –10 ON

Rate of change, %

ON Pick-up voltage

Rate of change, %

Rate of change, %

10

Rate of change, %

13.-(3) Influence of adjacent mounting

Tested sample: TQ2SA-12V, 6 pcs. Rate of change, %

13.-(2) Influence of adjacent mounting

Tested sample: TQ2SA-12V, 5 pcs. Rate of change, %

13.-(1) Influence of adjacent mounting

OFF

10 Drop-out voltage

0

OFF –10 OFF 0

1 2 3 4 5 6 .039 .079 .118 .157 .197 .236 Inter-relay distance , mm inch

10

ON Pick-up voltage

0

ON

–10

ON ON

10

OFF

0

Drop-out voltage OFF

–10

OFF

1 2 3 4 5 6 .039 .079 .118 .157 .197 .236 Inter-relay distance , mm inch

0

OFF 1 2 3 4 5 6 .039 .079 .118 .157 .197 .236 Inter-relay distance , mm inch

14. Pulse dialing test

458 Ω

+ 0.08 µF 48 V DC

0.08 µF

TQ-SMD 3 relay 2

458 Ω Wire spring relay

Ratio against the rated voltage, %V

Change of pick-up and drop-out voltage (mounting by IRS method)

Change of contact resistance (mounting by IRS method)

100

100

90

90

80 Pick-up voltage

70

Max.

60

Min.

50 40

Drop-out voltage

30

Max.

20

Min.

Contact resistance, mΩ

Tested sample: TQ2SA-12V, 6 pcs. (35 mA 48 V DC wire spring relay load) Circuit

80 70 60 50 40

Max.

30

Min.

20 10

10 0

10

20 30 40 No. of operations, ×104

0

50

IRS

10

20 30 40 No. of operations, ×104

50

;;;;

IRS

NOTES

1. Packing style 1) The relay is packed in a tube with the relay orientation mark on the left side, as shown in the figure below.

2) Tape and reel packing (surface-mount terminal type) (1) Tape dimensions (i) SA type

(2) Dimensions of plastic reel

mm inch

±0.8

21 .827 ±.031

mm inch

Orientation (indicates PIN No.1)stripe

0.4 ±0.1 .016 ±.004

Stopper (gray)

Relay polarity bar 4.0 ±0.1 .157 ±.004 (Z type) 1.75 ±0.1 1.5 +0.1 0 dia. ±.004 .059 +.004 dia. 0 2.0 ±0.1 .069 .079 ±.004

2.0 ±0.5 .079 ±.020

11.5 .453 14.6±0.1 .575±.004

Stopper (green)

6.3 ±0.2 .248 ±.008

2.0 .079

TQ-SMD relays

+0.1 0 +.004 0

dia. 16.0±0.1 12.3 ±0.1 dia. .630±.004 .484 ±.004

24.0 ±0.3 .945 ±.012

Tape coming out direction

mm inch

0.4 .016

Relay polarity bar (Z type) 1.5 +0.1 0 dia. .059 +.004 dia. 0

4.0 .157

±0.1 ±.004

1.75 ±0.1 ±.004 2.0 ±0.1 .069 .079 ±.004

11.5 ±0.1 .453 ±.004 14.6±0.1 .575±.004

7.8 ±0.2 .307 ±.008

TQ-SMD relays

Note) *SS type

2.0 +0.1 0 dia. 16.0 ±0.1 12.3 ±0.1 24.0 ±0.3 .079 +.004 dia. .630±.004 .484 ±.004 .945 ±.012 0 ±0.1 (10.1 Tape coming out direction .398 ±.004)*

For Cautions for Use, see Relay Technical Information All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.

330 ±2 dia. 12.992 ±.079 dia.

13 ±0.2 .512 ±.008

24.4+20 .961+.079 0

(ii) SL, SS type

±0.1 ±.004

100 ±1 dia. 3.937 ±.039 dia.

±0.1 ±.004

2.0±0.2 .079±.008

Panasonic TQSMD Relays  

Panasonic TQSMD Relays

Read more
Read more
Similar to
Popular now
Just for you