Page 1

ISO 9001 CERTIFIED

CHESTERTON 400 SERIES Flange Gasketing Materials ®

High reliability gaskets ● Excellent sealability ● Economical ● Complements the full line of CHESTERTON sealing products ●


CHESTERTON

®

400 SERIES Flange Gasketing Materials 450 Synthetic Fiber Sheet A low temperature, non-asbestos sheet gasketing material which is suitable for general services to 390°F ( 200°C ), 365 psi ( 25 bar ). 450 sheet gasketing is recommended for use in water, gas, brine and steam applications.

Typical Properties Maximum Temperature: 390°F ( 200°C ) Maximum Pressure: 365 psi ( 25 bar ) Compressibility ( ASTM-F36 ): 7-17% Sealability ( ASTM-F37 ): 0,25 ml/hr

Not recommended for use in chlorinated hydrocarbons, aromatic and ester ketones.

Creep Relaxation ( ASTM-F38 ): 20% Recovery ( ASTM-F36 ): 50% Tensile Strength Across Grain ( ASTM-F152 ): 1600 psi (110 bar ) P x T = 125,000 (°F x psi ) P x T = 4,375 (°C x bar )

457 Carbon Fiber/Nitrile Binder A high temperature, non-asbestos sheet gasketing material formulated for a wide variety of gasketing needs to 840°F (450°C ), 1470 psi (100 bar ). 457 is recommended for use in a broad range of steam, water, oil and hydrocarbon applications.

Not recommended for use in chlorinated hydrocarbons, aromatic and ester ketones. Typical Properties Maximum Temperature: 840°F (450°C ) Maximum Pressure: 1470 psi (100 bar ) Compressibility ( ASTM-F36 ): 5-15%

Sealability ( ASTM-F37): 0,30 ml/hr Creep Relaxation ( ASTM-F38 ): 30% Recovery ( ASTM-F36 ): 50% Tensile Strength Across Grain ( ASTM-F152): 1500 psi (100 bar ) P x T = 600,000 (°F x psi ) P x T = 21,800 (°C x bar )


High reliability gaskets Excellent sealability Economical Complements the full line of CHESTERTON sealing products ●

455 Aramid Fiber/Nitrile Binder A general purpose sheet gasketing material offering good sealability and chemical resistance. 455 incorporates a synthetic fiber and a nitrile binder. This material can be used against water, salt solutions, organic alkali aliphatic and aromatic hydrocarbons, alcohols, ester, oils and gases up to 575°F ( 300°C ).

Not recommended for use in chlorinated hydrocarbons, aromatic and ester ketones. Typical Properties Maximum Temperature: 575°F ( 300°C ) Maximum Pressure: 735 psi (50 bar )

Compressibility ( ASTM-F36 ): 7-17% Sealability ( ASTM-F37): 0,25 ml/hr Creep Relaxation ( ASTM-F38 ): 25% Recovery ( ASTM-F36 ): 50% Tensile Strength Across Grain ( ASTM-F152): 1500 psi (100 bar) P x T = 350,000 (°F x psi ) P x T = 12,810 (°C x bar )

459 Graphite Sheet with Nickel Reinforcement A nickel reinforced, flexible, graphite sheet gasketing material. This material is designed for use in high temperature, high pressure flange applications. It has excellent chemical resistance and can be used up to 1600°F (870°C ) in a non-oxidizing atmosphere.

Typical Properties Maximum Temperature: 1600°F (870°C ) non-oxidizing, 850°F (450°C ) oxidizing. Maximum Pressure: 2000 psi (140 bar ) Compressibility ( ASTM-F36 ): 40% Sealability ( ASTM-F37) : 0,5 ml/hr

Creep Relaxation ( ASTM-F38 ): <5% Recovery ( ASTM-F36 ): 12-17% Tensile Strength Across Grain ( ASTM-F152) : 750 psi (50 bar ) P x T = 1,600,000 (°F x psi ) P x T = 60,000 (°C x bar )


CHESTERTON

®

400 SERIES Flange Gasketing Materials

450 Synthetic Fiber Sheet Thickness Inches 1/64 1/32 1/16 3/32 1/8

Dimensions MM 0,4 0,8 1,5* 2,4 3,0*

Inches 60 x 60 60 x 60 60 x 60 60 x 60 60 x 60

M 1,52 x 1,52 1,52 x 1,52 1,52 x 1,52 1,52 x 1,52 1,52 x 1,52

AWC Item # 003050 003051 003052 003053 003054

455 Aramid Fiber/Nitrile Binder Thickness

Your single source for plantwide sealing CHESTERTON has a complete line of high reliability sealing devices. This includes new generation mechanical seals, advanced packing for pumps and valves, plus the most sophisticated and economical sheet gasketing available in the world today. Only CHESTERTON has a combined engineering and manufacturing organization for sealing devices and pumps. Let your local CHESTERTON Specialist help you seal your entire system for greater productivity at lower maintenance cost.

Inches 1/64 1/32 1/16 3/32 1/8

Dimensions MM 0,4 0,8 1,5* 2,4 3,0*

Inches 60 x 60 60 x 60 60 x 60 60 x 60 60 x 60

M 1,52 x 1,52 1,52 x 1,52 1,52 x 1,52 1,52 x 1,52 1,52 x 1,52

AWC Item # 003630 003631 003632 003633 003634

457 Carbon Fiber/Nitrile Binder Thickness Inches 1/64 1/32 1/16 3/32 1/8

Dimensions MM 0,4 0,8 1,5* 2,4 3,0*

Inches 60 x 60 60 x 60 60 x 60 60 x 60 60 x 60

M 1,52 x 1,52 1,52 x 1,52 1,52 x 1,52 1,52 x 1,52 1,52 x 1,52

AWC Item # 003851 003852 003853 003854 003855

459 Graphite Sheet with Nickel Reinforcement Thickness Inches 1/32 – 1/16 – 1/8

Dimensions MM 0,8 1,0 1,5 2,0 3,0

Inches 39.4 x 39.4 39.4 x 39.4 39.4 x 39.4 39.4 x 39.4 39.4 x 39.4

M 1,00 x 1,00 1,00 x 1,00 1,00 x 1,00 1,00 x 1,00 1,00 x 1,00

AWC Item # 005038 005043 005039 005044 005040

*Nominal Thickness

Ask your Specialist about the new 456 Glass Filled PTFE Gasketing. A.W. CHESTERTON CO.

DISTRIBUTED BY:

Middlesex Industrial Park, 225 Fallon Road Stoneham, Massachusetts 02180 -9101 USA Telephone: 781- 438 -7000 Fax: 781- 438 - 8971 Web Address: www.chesterton.com © A.W. CHESTERTON CO., 2002. All rights reserved. ® Registered trademark owned and licensed by A.W. CHESTERTON CO. in USA and other countries.

FORM NO. 070513 REV. 3

PRINTED IN USA 4/02

400 Series 450 455 457 459 Sheet Gasket Flange Sealing  

400 Series 450 455 457 459 Sheet Gasket Flange Sealing Packing & Gasket TC Sealing

Read more
Read more
Similar to
Popular now
Just for you