Issuu on Google+

MARCH 2010

KLOCK WERKS EXHAUST Is there currently a name any hotter than “Klock” when it comes to custom bikes? We doubt it and point to one of their top selling lines right now – exhaust. Brian and his team at Klock Werks have found a way to combine the kind of custom-style and performance-value that today’s riders are looking for. Be sure you are stocked when they show up ready-to-rumble.

1801-0412

1801-0413

1801-0411

SHORT-STYLE SUPER SAVER 4” SLIP-ON MUFFLERS

•Great value and style in big, 4” slip-on mufflers with rolled-edge ends in three different designs that are 2” shorter (approximately 261/2”) than the Standard Super Saver mufflers •All steel construction with flawless chrome finish •Feature 2” spiral-louvered fiberglass-wrapped baffles that are removable and repackable •Throaty rumble at idle and under acceleration; decreases to a low hum under steady cruising •Sold in pairs •Made in the U.S.A.

PART # DESCRIPTION FOR 95-10 FLT, FLHT, FLHX, FLHR, FLTR MODELS (EXCEPT 10 FLHX/FLTRX)

1801-0411 1801-0412 1801-0413

Straight-cut Forward slash Back slash

SUG. RETAIL $369.95 369.95 369.95


MEMPHIS SHADES Riders everywhere have seen the Memphis Shades truck at places like Sturgis and Daytona where they “fit” riders with the perfect windshield or fairing for free. But their support goes even further. Grand National Flat Track racer JR Schnabel keeps the Memphis Shades name in front of the crowds – and often in front of the pack – throughout the racing season to further celebrate this high-quality brand. Watch for them.

Batwing fairing shown with optional 5” windshield and wind deflectors

Batwing fairing shown with optional 7” windshield

Batwing fairing shown with optional 9” windshield

Batwing fairing shown with optional 12” windshield PART# 2310-0315

MEMPHIS SHADES BATWING FAIRING

•Feature clean aerodynamic shape; fairing body is 361/2” wide and 17” tall (excluding windshield and wind deflectors) •Inner fairing structure is black textured ABS •Fairing outer shell is opaque black Lucite with a class A finish that looks great as is, or can easily be painted •Memphis Shades exclusive No-Tool Trigger-Lock mount kits feature a detach system that allows you to quickly and easily remove or install your fairing •Trigger-Lock kits are a combination of CNC-machined, black E-coated aluminum plates, gray polymer bushings and glass filled nylon latches for a clean appearance that’s built to last •Fairing is predrilled and fitted with push-out hole plugs for easy wind deflector installation •Windshields are available in four heights and in clear and solar; other colors and sizes are also available, see 2010 FatBook •Optional wind deflectors for increased downward airflow, windshield tri-pouch for storage and fairing trims for style are also available; see 2010 FatBook NOTE: Batwing Fairing is not compatible with any other fairing windshields, wind deflectors or accessories. NOTE: Softail models listed that already have a Memphis Fats or Slim windshield installed can use their existing Trigger-Lock mount kit to install a Batwing Fairing, or purchase a plate-only kit (black) and switch back-and-forth from Fats or Slim windshield to Batwing Fairing.

2


MEMPHIS SHADES BATWING FAIRING (cont)

Batwing Fairing

2320-0048

2320-0043

WHAT TO ORDER 1. Batwing Fairing Spring loaded Trigger-Lock

2. Trigger-Lock Mount Kit specific to bike model; some softail models may require a turn signal relocation kit 3. Windshield of your preference; Heights and colors, Wind deflectors and accessories; see 2010 FatBook

Trigger-Lock Mounts let you remove your Batwing Fairing in a moment’s time or quickly change to your Memphis Shades Fats/Slim or Sportshield windshield to instantly change the look of your bike.

DESCRIPTION For For For For For For For

MOUNTING HARDWARE POLISHED BLACK

BATWING FAIRING

86-10 FLST/C w/o lightbar1 86-10 FLST/C w/ lightbar2 90-10 FLSTF w/o lightbar1 90-10 FLSTF w/ lightbar2 93-96, 05-10 FLSTN w/o lightbar1 93-96, 05-10 FLSTN w/ lightbar2 94-10 FLHR/FLHRI/FLHRCI/FLHRSI4

2330-0017 2330-0017 2330-0017 2330-0017 2330-0017 2330-0017 2330-0017

2320-0019 2320-0021 2320-0019 2320-0021 2320-0019 2320-0021 2320-00483

PLATE-ONLY KITS POLISHED BLACK

2320-0043 2320-0044 2320-0043 2320-0044 2320-0043 2320-0044 2320-00493

2320-0024 2320-0026 2320-0024 2320-0026 2320-0024 2320-0026 -

2320-0046 2320-0047 2320-0046 2320-0047 2320-0046 2320-0047 -

1 Handlebar-mounted

turn signals may require turn signal relocation kit, PART #2321-0088; see 2010 FatBook. turn signals may require turn signal relocation kit, PART #2321-0089; see 2010 FatBook. 3 Now angle adjustable. 4 FLHRS/FLHRSI require OEM windshield docking hardware. 2 Handlebar-mounted

WINDSHIELDS PART # DESCRIPTION 5” WINDSHIELDS 2310-0269 2310-0304

Clear Solar

SUG. RETAIL $69.95 69.95

PART # DESCRIPTION 7” WINDSHIELDS 2310-0270 2310-0305

Clear Solar

SUG. RETAIL $69.95 69.95

PART # DESCRIPTION 9” WINDSHIELDS 2310-0271 2310-0306

Clear Solar

SUG. RETAIL $69.95 69.95

PART # DESCRIPTION 12” WINDSHIELDS 2310-0307 2310-0315

Clear Solar

SUG. RETAIL $69.95 69.95

fairing and hardware prices PART # BATWING FAIRING

SUG. RETAIL

2330-0017

$229.95

2320-0019 2320-0021

137.95 137.95

MOUNTING HARDWARE

PART # MOUNTING HARDWARE (CONT) 2320-0043 2320-0044 2320-0048 2320-0049

SUG. RETAIL $144.95 144.95 137.95 144.95

PART # PLATE-ONLY KITS 2320-0024 2320-0026 2320-0046 2320-0047

SUG. RETAIL $60.95 60.95 70.95 70.95

3


4405-0199

4405-0198

7.25” FAIRING SPEAKER UPGRADES

•High-performance 7.25” round speakers are the largest diameter speakers that can be installed into the Harley BatWingstyle fairing, with cone volume and mass comparable to a 6” x 9” speaker •140W max power •Waterproof injection-molded polycarbonate woofer cone, high-flux strength but lightweight dual-donut Neodymium magnet and high-efficiency voice coil •Grillework features mounted black or chrome tweeter and midrange, and top-quality adapter rings/bracket hardware for secure and clean mounting into the fairing •Mounting hole pattern and spade electrical connections are exactly the same as the factory specification for easy installation •Includes easy-install, adhesive-backed, inside fairing acoustic foam pads to help tighten up the bass and improve overall fairing audio resonance •Sold in pairs

PART # DESCRIPTION FOR 06-10 FLHTC (2 OHM)

SUG. RETAIL

4405-0198 4405-0199

Black Chrome

$279.95 279.95

4405-0200 4405-0201

Black Chrome

279.95 279.95

FOR 98-05 FLHTC (8 OHM)

4402-0096

4402-0097

FLEXPOWER™ HIDE-AWAY ANTENNAS

•Designed for H-D Classic (BatWing) or RoadGlide fairing with factory H-D or aftermarket radio or CB •Easy plug-in installation; no wires to cut or splice •Includes detailed installation instructions

PART #

DESCRIPTION

4402-0096 4402-0097

27mhz pre-tuned CB hide-away for 98-10 FLT, FLHT and FLTR fairings w/ factory H-D CB radio 27mhz pre-tuned CB hide-away for 98-10 FLT, FLHT and FLTR fairings w/ J&M or other aftermarket radio using the PL-259 connector

SUG. RETAIL

0610-0264

HANDLEBAR INSTALLATION KIT

•Complete installation kit for 12”, 14” and 16” Burly narrow bottom apehangers •Kit includes black braided steel brake line, extended clutch cable, extended throttle cables and all necessary wiring •Made in the U.S.A.

Black

1” CUSTOM HANDLEBARS

PART # 12”

Chrome

•High-quality steel tubing with 31/2” on-center knurling •Slotted and drilled for internal wiring •Feature a narrow center/tapered design for a great new look on narrow glide front ends •Available in black or chrome finish •Made in the U.S.A.

PART #

DESCRIPTION FINISH

0601-1375 0601-1376

Narrow Ape Narrow Ape

4

$79.95 79.95

END RISE

Black 12” Chrome 12”

CENTER WIDTH

PULLSUG. BACK RETAIL

321/2” 321/2”

41/4” 41/4”

7” 7”

$122.95 144.95

SUG. RETAIL

0610-0264 0610-0267 0610-0270

For 97-03 XL For 04-06 XL For 07-10 XL

$199.95 199.95 199.95

0610-0265 0610-0268 0610-0271

For 97-03 XL For 04-06 XL For 07-10 XL

199.95 199.95 199.95

0610-0266 0610-0269 0610-0272

For 97-03 XL For 04-06 XL For 07-10 XL

199.95 199.95 199.95

14”

WIDTH

DESCRIPTION

16”


NYC CHOPPERS...THE BOBBER is a phenomenon that has taken the custom-bike-building world by storm. And at the forefront of this revolution is a man named Nick Genender and his company, NYC Choppers. Right at the very start, Nick put together a FatBook Bobber that is still talked about today, and he continues to develop new parts that are “clean and simple” the same way that Nick builds his Bobbers.

CROSS BONES™ SEAT PAN

•Direct OEM bolt-on seat pan •Uses all OEM components and hardware •Constructed of 11-gauge metal (0.119” thickness) •Lowers seat height or riding position approximately 11/2” •Measures approximately 10” W x 15” L •Made in the U.S.A.

PART #

DESCRIPTION

0802-0558

For 08-10 FLSTSB

SEAT PANS

2010-0683

SUG. RETAIL $129.95

0806-0045

•Constructed of 11-gauge metal (0.119” thickness) •Bottom includes four mounting points •Fit all custom applications •Made in the U.S.A.

PART #

DESCRIPTION

0806-0044 0806-0045

Small (approximately 81/2” W x 13” L) Medium (approximately 10” W x 13” L)

•Stainless steel light housing with red glass lens •Black powder-coated backing plate with 3/4” mounting hole •Available in a horizontal style •12V dual-bulb design •1932 replacement lens glows red/yellow when light is on; sold separately •Made in the U.S.A.

QUICK-DETACH PASSENGER BACKREST KITS

DESCRIPTION

SUG. RETAIL

2010-0683 2010-0684

Horizontal mount Repl. lens

$173.95 31.95

2010-0682

Horizontal mount

173.95

1928 STYLE

$129.95 129.95

2010-0682

1928/1932 FORD BOBBER STYLE SIDE MOUNT TAILLIGHT/LICENSE PLATE ASSEMBLIES

PART # 1932 STYLE

SUG. RETAIL

2010-0684

1501-0310

1501-0339

•Complete backrest and mount kit in a ready-to-go package •Backrest is constructed of steel with a chrome finish and includes a black vinyl pad •All kits feature a quick-detach mounting system that allows easy installation or removal •Short steel backrest has a 11 1/2” mounted height; touring steel backrest has a 14 1/2” mounted height

PART # DESCRIPTION SHORT BACKREST KITS (6” X 6” PAD) 1501-0310

1501-0314 1501-0312 1501-0309 1501-0313 1501-0308

For 00-05 FXST, 00-10 FLST models (except FXSTD and models w/ 200mm rear tire) For 06-10 FXST, FLST models with 200mm rear tire For 84-99 FXST, FLST models For 06-10 FXD models (except FXDF, FXDWG) For 07-08 FXDWG For 04-10 XL models

SUG. RETAIL

PART # DESCRIPTION TOURING BACKREST KITS (8” X 8” PAD) 1501-0339

$299.95 299.95 299.95 324.95 299.95 299.95

1501-0343 1501-0341 1501-0338 1501-0342 1501-0337

For 00-05 FXST, 00-10 FLST models (except FXSTD and models w/ 200mm rear tire) For 06-10 FXST, FLST models with 200mm rear tire For 84-99 FXST, FLST models For 06-10 FXD models (except FXDF, FXDWG) For 07-08 FXDWG For 04-10 XL models

SUG. RETAIL $349.95 349.95 349.95 374.95 349.95 349.95

5


1622-0357

1622-0354

FORWARD CONTROLS

•CNC-machined from 6061 T-6 aluminum •3/4” mounting plates for superior strength •Feature sealed bearings on the pivot points for smooth operation and no maintenance •Assembled with chrome hardware, kit comes ready to install •Used with existing stock master cylinder •Includes foot, shift and brake pegs, swivel joints, shift and brake rods and instructions •Available with a chrome-plated or Night Series finish •Made in the U.S.A.

PART # DESCRIPTION FOR 09-10 FLHT, FLHX, FLHR, FLTR 1622-03541 1622-03551 1622-03561 1622-03571

Diamond, +6”; chrome Diamond, +6”; night series Slotted, +6”; chrome Slotted, +6”; night series

SUG. RETAIL $884.95 884.95 884.95 884.95

1 Recommended

NOTE: When installing extended forward controls, check fender clearance before operating.

for riders with 30” + inseams. Moves foot position forward 6” from standard floorboard position. Will fit with crash bar.

0703-0301 0703-0303

GAS CAPS

•CNC-machined from billet aluminum with a chrome finish •Sold each •Made in the U.S.A.

CLUTCH KIT

FOR 84-E96 STYLE TANKS PART # SPOKE

DESCRIPTION

SUG. RETAIL

0703-0302 0703-0303

Left side, non-vented Right side, vented

$199.95 199.95

0703-0300 0703-0301

Left side, non-vented Right side, vented

199.95 199.95

SPROCKET

•Just open the jaws and squeeze •Automatically adjust to the proper size for optimum gripping power •Truly a “one-hand” operation •Makes any job quicker and easier than ever before •Thin raised-jaw design provides easy access to tight areas

DESCRIPTION

3850-0111

Auto clamp pliers

6

PART #

DESCRIPTION

1120-0224

For 06 FXD, 07-10 Big Twin

SUG. RETAIL $1,051.95

ULTRA WRENCHES

•Unique design provides a tight fit and eliminates the “play” of 3850-0109 most adjustable wrenches •Available in (SAE) American Standard (12 sizes) and Metric (18 sizes) •Small enough to fit in your storage compartment or your pocket •Spring loaded adjustments work like a pocket knife and allow the correct size to be used every time •Comes in a sturdy and durable material pouch with belt loop feature

AUTO CLAMP PLIERS

PART #

•Features clutch basket with 46-tooth sprocket and 106-tooth ring gear •Also includes complete Pro clutch assembly •Made in the U.S.A.

SUG. RETAIL $23.95

PART #

DESCRIPTION

3850-0109 3850-0110

Standard Metric

SUG. RETAIL $35.95 35.95


Step 2: Push into Fitting

Step 3: Screw into Banjo

Step 1: Cut to length

Step 4: Thread together

MAGNUM SHIELDING Here is a company that began serving the motorcycling community back in 1982 and has been onboard with Drag Specialties for almost as long. Today, they continue to improve and develop new products like their Build Your Own Brake Line kits. A simplified solution for both OE replacement and custom builds where riders want a perfect-fit custom-look and improved performance quickly and easily.

BUILD YOUR OWN (BYO) BRAKE LINES

•Meets all DOT EMVSS-106 standards for safe and reliable on-road use •Assembles in only five minutes with side cutters 1741-2445 or scissors and 7/16” wrench Shown assembled •Features sleek contoured polished stainless and chrome-plated fittings for an uncompromising appearance •Eliminates guesswork; get the perfect length and banjo 1741-2457 rotation every time •Kits come with 3’ or 6’ of non-yellowing clear-coated -3 stainless brake hose to cover most applications •Kits offer wide application coverage and contain all the components needed to make one complete brake line •All brake line hose is pressured tested and inspected •Single disc kits for 86-10 models (except 04-10 XL) include one 7/16” and one 3/8”/10mm banjo with hardware, 3’ or 6’ of -3 stainless hose, washers and vice wrench •Dual disc kits for 84-10 Touring models include one chrome-plated manifold, three 3/8”/10mm banjo with hardware, 6’ of -3 stainless hose, washers and vice wrench •Single disc kits for 04-10 XL models include two 10mm banjos with hardware, 3’ or 6’ of stainless hose, washers and vice wrench •Dual disc kits for 04-10 XL models include one chrome-plated manifold, one 12mm and two 10mm banjos with hardware, 6’ stainless hose, washers and vice wrench •For the custom builder, all components and hoses are available separately to create and build your own brake or hydraulic clutch line NOTE: All Build Your Own fittings and hose are specially designed to work solely in conjunction with each other and are not compatible with any other product or brand, nor DOT approved. NOTE: 04-10 XL models use 10mm x 1.25 and 12mm x 1.50 banjo bolts, washer and fittings. All Big Twin (except 08-10 Dresser models and pre-04 XL) use 3/8” and 7/16” banjo bolts, washers and fittings. Washers and fittings listed as 3/8”/10mm can be used in either application. For bolts and washers, see the 2010 FatBook

PART # DESCRIPTION SINGLE DISC BRAKE LINE KITS W/ 3’ BRAKE LINE 1741-2454 1741-2455 1741-2456 1741-2453 1741-2458

For 04-10 XL models (10mm 35° banjo) For 04-10 XL models (10mm 60° banjo) For 04-10 XL models (10mm 90° banjo) For 04-10 XL models (10mm 180° banjo) For 91-10 Dyna models, 84-10 Softail models, 86-03 XL models (7/16” 35° banjo) For 91-10 Dyna models, 84-10 Softail models, 86-03 XL models (7/16” 90° banjo) For 91-10 Dyna models, 84-10 Softail models, 86-03 XL models (7/16” 180° banjo)

1741-2459 1741-2457

PART # DESCRIPTION DUAL DISC BRAKE LINE KITS W/ 6’ BRAKE LINE

1741-2445 1741-2446 1741-2444 1741-2448 1741-2449

For For For For For

04-10 04-10 04-10 84-07 84-07

XL models (12mm 35° banjo) XL models (12mm 90° banjo) XL models (12mm 180° banjo) Touring (3/8”/10mm 35° banjo) Touring (3/8”/10mm 90° banjo)

SUG. RETAIL $39.95 39.95 39.95 39.95

PART # DESCRIPTION SINGLE DISC BRAKE LINE KITS W/ 6’ BRAKE LINE 1741-2464 1741-2465 1741-2466 1741-2463 1741-2468

For 04-10 XL models (10mm 35° banjo) For 04-10 XL models (10mm 60° banjo) For 04-10 XL models (10mm 90° banjo) For 04-10 XL models (10mm 180° banjo) For 91-10 Dyna models, 84-10 Softail models, 86-03 XL models (7/16” 35° banjo) For 91-10 Dyna models, 84-10 Softail models, 86-03 XL models (7/16” 90° banjo) For 91-10 Dyna models, 84-10 Softail models, 86-03 XL models (7/16” 180° banjo)

39.95 1741-2469 39.95 1741-2467 39.95

SUG. RETAIL $99.95 99.95 99.95 99.95 99.95

SUG. RETAIL

PART # DESCRIPTION DUAL DISC BRAKE LINE KITS W/ 6’ BRAKE LINE (CONT)

1741-2447 1741-2451 1741-2452 1741-2450

For For For For

84-07 08-10 08-10 08-10

(3/8”/10mm

Touring 180° Touring Non ABS (10mm Touring Non ABS (10mm Touring Non ABS (10mm

banjo) 35° banjo) 90° banjo) 180° banjo)

$44.95 44.95 44.95 44.95 44.95 44.95 44.95

SUG. RETAIL $99.95 99.95 99.95 99.95

7


ENDURANCE BEEHIVE™ VALVE SPRINGS

•Machined from premium-grade hi-tensile chrome silicon single conical ovate wire •Shot-peened with specially processed thermal heat treat and super NexTex® finish for fatigue life needed to exceed high demands of V-Twin engines •Kits include: Endurance BeeHive valve springs, lightweight 7° super Titanium heat-treated retainers, machined chromoly spring seats and valve locks and a set of premium Viton® valve seals equipped with spring loaded valve stem wiper system •Spring pressures are 185 lb. at .635” lift and 160 lb. at .650” lift •Made in the U.S.A.

PART # DESCRIPTION FOR 05-10 TWIN CAM 0926-0852

SUG. RETAIL

7°, 7mm valve stem w/ stock triple keeper groove

$319.95

SUG. RETAIL

PART # DESCRIPTION FOR 84-04 BIG TWIN AND 86-03 XL 0926-0851

7°, 5/16” valve stem and keeper groove

$319.95

HIGH-LOAD BEEHIVE™ VALVE SPRINGS

•Made from premium stress-relieved conical ovate wire with nitrided surface heat treatment, shot-peened surface enhancements and Nano Peen™ polish •Feature extremely high level of fatigue life •Designed to handle the highest demands of performance engines with high lift, steep ramped camshafts •Kits include: High-Load BeeHive valve springs, lightweight 10° Titanium retainers manufactured from special Ti-17 alloy and micropolished for enhanced fatigue life, machined heat-treated chromoly spring seats and valve locks and a set of premium Viton® valve seals equipped with spring loaded valve stem wiper system •Spring pressures are 215 lb. at .585” lift, 200 lb. at .635” lift and 185 lb. at .685” lift •Dyno proven and track tested •Made in the U.S.A.

PART # DESCRIPTION FOR 05-10 TWIN CAM 0926-0854

10°, 7mm valve stem with stock triple keeper groove

SUG. RETAIL

PART # DESCRIPTION FOR 84-04 BIG TWIN AND 86-03 XL 0926-0853

SUG. RETAIL

10°, 5/16” valve stem and keeper groove

$338.95

$338.95

1602-0279

1602-0280

1602-0281

HEEL/TOE SHIFTER LEVERS

•Carved from billet aluminum •Available in Deep Cut, Retro and Radius styles •Shifter pegs included except with Radius style; Radius-style allows the use of any shifter peg

8

PART # DESCRIPTION FOR 00-10 FLST AND 97-10 FLT 1602-0278 1602-0279 1602-0280 1602-0281

Radius Deep Cut, chrome Deep Cut, black Retro, chrome

SUG. RETAIL $249.95 324.95 324.95 299.95


THUNDER CYCLE DESIGNS Renaissance Man Eddie Trotta’s Thunder Cycle Designs is known throughout the world for producing what the folks there like to call, “Heavy Metal Art.” So well known in fact, even international visitors to Florida stop by Trotta’s headquarters to see this Master Builder’s work. With so much brand recognition it is easy to see why customers come in and ask for Eddie Trotta/ Thunder Cycle Designs by name. 1621-0199

1621-0198

MINI FLOORBOARDS

1621-0200 1621-0201

DRIVER FLOORBOARDS

•CNC-machined from billet aluminum •Feature back cut design with a raised diamond cut center for increased traction •Made in the U.S.A.

PART # DESCRIPTION FOR 86-10 FLST, 84-10 FLT/FLHT 1621-0200 1621-0201

SUG. RETAIL

Chrome Black powder coat

$399.95 399.95

•CNC-machined from billet aluminum •Fits most forward controls and universal mounting •Rigid mounting with 3/8”-16 mounting bolt •Allows more foot movement compared to conventional footpegs •Back cut design with diamond cut raised center for increased traction •Measure 7” L x 21/2” W •May be used as passenger foot boards if custom mounted •Made in the U.S.A.

PART #

DESCRIPTION

1621-0198 1621-0199

Black powder coat Chrome

SUG. RETAIL $329.95 329.95

1704-0236

1704-0225

Black

Chrome

1704-0235

calipers

4-PISTON QUAD SERIES CALIPERS/brackets •Calipers machined from billet aluminum with equal-sized pistons •Available in black-anodized, chrome or polished finish •Calipers and brackets must be purchased separately •Made in the U.S.A. with domestic materials

PART # DESCRIPTION 4-PISTON QUAD-SERIES, SMOOTH (FRONT) 1701-0325 1701-0324 1701-0323

Black Chrome Polished

SUG. RETAIL $323.95 323.95 284.95

PART # DESCRIPTION 4-PISTON QUAD-SERIES, SMOOTH (REAR) 1701-0328 1701-0327 1701-0326

Black Chrome Polished

SUG. RETAIL $323.95 323.95 284.95

CALIPER BRACKETS PART # DESCRIPTION SUG. RETAIL FOR 4-PISTON QUAD-SERIES CALIPERS (FRONT LEFT WITH 11 1/2” ROTOR) 1704-0235

1704-0236 1704-0237

For 00-07 models (except Springers, 06-07 Dyna, 04-07 XL, V-Rod), black For 00-07 models (except Springers, 06-07 Dyna, 04-07 XL, V-Rod), chrome For 00-07 models (except Springers, 06-07 Dyna, 04-07 XL, V-Rod), polished

PART # DESCRIPTION SUG. RETAIL FOR 4-PISTON QUAD-SERIES CALIPERS WITH EARS (REAR RIGHT) 1704-0223

$115.95 1704-0224 115.95 1704-0225 92.95

For 00-05 FXST, 00-07 FLST (except 07 FLSTF); black For 00-05 FXST, 00-07 FLST (except 07 FLSTF); chrome For 00-05 FXST, 00-07 FLST (except 07 FLSTF); polished

$115.95 115.95 92.95

9


2040-0530 2040-0531

MINI RETRO-STYLE MARKER LIGHT

MINI DEUCE MARKER LIGHTS

•Bullet lights with deuce-style lenses •Lens measures 13/4” diameter with a 23/8” long body •Feature 5/16”-24 hollow bolt mount •Include dual-filament 12V bulb •Available with clear/smoke or amber/red lens combination •Sold in pairs

PART #

DESCRIPTION

2040-0530 2040-0531

Lights w/ clear/smoke lenses Lights w/ amber/red lenses

SUG. RETAIL $37.95 37.95

•Cool 60s look in a retro die-cast chrome housing •No visible bezel hardware for a clean look •Light body measures 15/8” in diameter with a 31/4” long body •Mount using 5/16”-24 hollow bolt •Dual-filament 12V bulb, amber and red lenses included •Sold in pairs

PART #

DESCRIPTION

2040-0533

Mini retro lights

SUG. RETAIL $37.95

CUSTOM BULLET MARKER LIGHTS

•Clean, custom design of a favorite look •Lens bezel features no visible hardware •Light measures 11/2” in diameter and is 21/2” long •5/16”-24 hollow mounting bolt •Includes dual-filament 12V bulb •Sold in pairs; include amber and red lenses

PART #

DESCRIPTION

2040-0532

Custom bullet marker lights, hollow bolt mount

SUG. RETAIL $37.95

0630-0617

KNURLED GRIPS

CUSHION PAD GRIPS

•Feature six rubber inserts for ease of grip and to isolate the hand from vibration on long rides •Machined from billet aluminum with a chrome-plated finish

PART #

DESCRIPTION

0630-0615

For 84-10 models (except 08-10 FLHT/ FLHR/FLTR/FLHX) w/ dual-cable throttle For 08-10 FLHT/FLHR/FLTR/FLHX

0630-0616

10

0630-0615

SUG. RETAIL $99.95 99.95

•Billet machined and given a chrome-plated finish •Knurled finish and two rubber bands match Drag Specialties footpegs PART #1620-0677 and shift peg PART #1603-0099

PART #

DESCRIPTION

0630-0618

For 84-10 models (except 08-10 FLHT/ FLHR/FLTR/FLHX) w/ dual-cable throttle For 08-10 FLHT/FLHR/FLTR/FLHX

0630-0617

SUG. RETAIL $99.95 99.95


UPPER REAR BELT GUARD •High-quality stamped-steel construction •Chrome finish

PART #

DESCRIPTION

1202-0075

For 08-10 FXCW models; repl. OEM #60550-08

SUG. RETAIL $52.95

REAR WHEEL BEARING KIT

•Contains all necessary bearings required •Bearings are premium EMQ quality featuring low-drag, double-lip rubber seals that keep water out and improve grease retention NOTE: Follow OEM-prescribed procedures for installing and checking wheel bearing end play.

PART #

DESCRIPTION

0215-0288

For 09-10 FLHT, FLHX, FLHR, FLTR (w/o ABS)

1 Not

SUG. RETAIL $20.95

for VRSC models w/ 240mm tire.

STARTER SOLENOID KIT

•Kit contains contacts and gaskets to cover all models

PART #

DESCRIPTION

2110-0320

For 06 Dyna and 07-10 Big Twin

SUG. RETAIL $24.95

CRANKCASE BREATHER/ SUPPORT BRACKET KITS

STARTER DRIVE CLUTCH

•High-quality components to repair common failures of OEM Harley starters •Includes bearing and gear

PART #

DESCRIPTION

2110-0319

For 06 Dyna and 07-10 Big Twin

SUG. RETAIL $84.95

•Kit allows the installation of aftermarket air cleaner assemblies on late model bikes equipped with OEM Delphi EFI system •Includes bracket, all mounting hardware and available with or without filter and hose

PART # DESCRIPTION FOR 08-10 FLHT, FLTR, FLHR MODELS 1013-0035 1013-0036

Kit w/o hose or filter Kit w/ hose and filter

AIR CLEANER ADAPTERS

•Allows installation of a Dragtron II air cleaner (DS-289044) to models listed •Plain machined finish

SUG. RETAIL

1013-0036

$29.95 64.95

1010-0553 1010-0552

PART #

DESCRIPTION

1010-0552

For 08-10 FLHT, FLHX, FLHR, FLTR models

SUG. RETAIL $24.95

PART #

DESCRIPTION

1010-0553

For 01-10 models w/ Delphi EFi (except 08-10 Dressers)

SUG. RETAIL $19.95

11


THUNDERMAX ECM WITH AUTO-TUNE CLOSED LOOP SYSTEM

•ThunderMax ECM with Auto-Tune module mounts conveniently in place of the factory ECM and plugs in to the existing harness •Maps, software and firmware updates available on line at no charge •On-line tech support and map analysis •Installation and how-to videos available online (YouTube-ThunderMax AV) •New AutoMap software feature creates new base map based on AutoTune automatically generated AFR corrections •Quickly find the best map for your application using SmartLink Map Filters •With the Auto-Tune, AFR tuning for component and exhaust changes are self-adjusting – simply install, download a map and ride while Auto-Tune maintains target AFR in all conditions •Includes ThunderMax ECM and Auto-Tune Module, plug-in harness and two wide band sensors, SmartLink Software and communication cable, QuickStart Easy Install and Comprehensive User’s Manual, technical support and free software and updates •Select and install a matching base map and enjoy the efficiency of a balanced fuel curve for throttle response like you’ve never imagined •No extensive dyno tuning required for most models •Alpha-N design unaffected by long duration camshafts •Replaces factory ECM – easy plug-in installation and set-up •Simple adjustable rev limit, idle, speedo calibration and decel pop control settings •Easily adjust fuel, ignition timing and cold start maps •Supports nitrous and supercharger applications •Versatile – plug and ride or live-tune a custom application •Logs engine starts, engine temperatures and total hours of operation time in 100 rpm increments •Read diagnostic codes through software or traditional methods •Record live data during riding or tuning sessions; choose replay speed for data analysis •ThunderMax includes SmartLink Software and cable for easy PC tuning, maps for popular engine combinations and Quick-Start Easy Install and Comprehensive User’s Manual •Made in the U.S.A. NOTE: Because of possible clearance issues, some aftermarket exhaust systems may require modifications or relocation of their O2 sensor port bungs. NOTE: Legal in California only for racing vehicles which may never be used upon a highway. Some products may not be legal for sale or use on pollution-controlled vehicles, check your local laws and the manufacturer’s information.

PART #

DESCRIPTION

1020-1131

For 08-10 XR1200

THUNDERMAX 50

•California ARB-legal complete replacement engine management system for Delphi®-equipped EFI model Harleys listed below •ThunderMax 50 automatically corrects air/fuel ratios through the use of wide-band oxygen sensors and the ThunderMax AutoTune module •This system allows continuous AFR tuning, keeping the engine at the specified air-fuel ratio regardless of the changes in ambient conditions or terrain the vehicle is being operated in – without tuning on a dynamometer •Features increased torque and power over the stock system and maintains excellent fuel economy •System properly self-tunes aftermarket exhaust systems automatically •2006 models will require exhaust systems equipped with or modified for oxygen sensor bungs •Adjustable rev limiter •Provides access to read vehicle diagnostic trouble codes •Made in the U.S.A. NOTE: Because of possible clearance issues, some aftermarket exhaust systems may require modifications or relocation of their O2 sensor port bungs. NOTE: C.A.R.B. EO #s D-644, K-001, K-001-1, K-001-2.

PART #

DESCRIPTION

1020-1133

For 08-10 FXST and FXD models w/ 96” engine (except FXDF) For 06 Softail and Touring models w/ 88” engine

1020-1132

12

SUG. RETAIL $899.95 899.95

MARCH 2010

| 9901-0807

SUG. RETAIL $899.95


mar10