Issuu on Google+

451


SECTION

8

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST

DRIVE BRAKE 6-SPEED TRANSMISSION ASSEMBLY •Chrome assembly features 8” stainless steel rotor and 6061 T-6 aluminum hydraulic clutch actuator spider with 1.5” diameter piston •Dual-piston brake caliper with Performance Machine guts •Inboard piston bore is an integral part of the door •Dual brake bleeders; one above each piston •29-tooth .5” offset pulley standard •Made in the U.S.A. NOTE: Not compatible with Baker Firestarter.

FUEL/AIR SYSTEMS ENGINE

PART # 1101-0044

DESCRIPTION For 90-99 custom right side drive FXST/FLST-based models

GEAR 1st 2nd

RATIO 2.94 2.21

GEAR 3rd 4th

SUG. RETAIL $4,995.95 RATIO 1.60 1.23

GEAR 5th 6th

RATIO 1.00 .86

1101-0045

1101-0046

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

POWERBOX 6-SPEED TRANSMISSION ASSEMBLIES •Design inspired from the TorqueBox coupled with a diamond-ground 8620 steel 6-speed overdrive gearset •Torque capacity of 165 ft.-lb. •Hydraulic clutch actuator with 1.5” piston standard •No neutral switch for a clean look •Speed sensor provision located on the back of case requires a .120 spacer, included •Case and top cover feature a show polished finish •12-point grade 8 stainless steel ARP fasteners •Available with standard ratio gearsets •Right side drive and left side drive come with 23 tooth .5” offset chain sprocket •Left side drive can be upgraded to all pulley and chain sizes and offsets to suit any application •Made in the U.S.A. NOTE: No pulley option available for right side drive models due to tight actuator spider size. PART # 1101-0045 1101-0046

DESCRIPTION For 90-99 custom right side drive FXST/FLST-based models For 90-99 FXST/FLST left side drive models

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

452

GEAR 1st 2nd 3rd

RATIO 2.94 2.21 1.60

GEAR 4th 5th 6th

RATIO 1.23 1.00 .86

1101-0027

TANKS & OIL FILTERS DASHES & GAUGES

SUG. RETAIL $3,695.95 3,595.95

1101-0024

6-SPEED CUSTOM BILLET TRANSMISSIONS •For that total custom look, transmission cases come without neutral switch or speedometer sensor holes •Features Baker’s chrome or polished cases with a choice of gear options •Mechanical clutch actuator •Hydraulic clutch applications will require a 11/16” or larger bore master cylinder •Includes a 32T transmission pulley •Made in the U.S.A. PART # DESCRIPTION LEFT-SIDE DRIVE FOR 90-97 FXST/FLST AND RIGID/FXST/FLST CUSTOMS 1101-0024 Chrome w/ mechanical clutch RIGHT-SIDE DRIVE FOR 90-97 FXST/FLST AND RIGID/FXST/FLST CUSTOMS 1101-0028 Chrome w/ mechanical clutch 1101-0025 Polished w/ hydraulic clutch 1101-0027 Chrome w/ hydraulic clutch

RATIO 2.82 1st/2.08 2nd/.80 6th 2.94 1st/.86 6th 2.94 1st/.86 6th 2.94 1st/.86 6th

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $4,106.95 4,834.95 4,614.95 4,834.95


SECTION

8

WINDSHIELDS TOURING 2017-1357

6-SPEED TRANSMISSION ASSEMBLIES FOR TWIN CAMS

LUGGAGE

•Available in gear ratios of 2.94 or 3.24 1st gear and .87 6th gear •Significantly smoother shifting than stock due to a roller detent shift drum with reduced inertia and gear dog teeth with lead-in ramping •Available in a polished or black-wrinkle finish •Come with MSO •Made in the U.S.A.

SEATS & SISSY BARS

NOTE: Exhaust bracket may require modification when using these transmissions. PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION FOR 00-06 FXST, FLST FOR 00-06 FXST, FLST (CONT) DS-194517 Wrinkle-black case w/ 2.94 1st and .87 6th $3,378.95 2017-1357 Polished case w/ 2.94 1st and .87 6th DS-194518 Wrinkle-black case w/ 3.24 1st and .87 6th 3,378.95 2017-1358 Polished case w/ 3.24 1st and .87 6th

SUG. RETAIL $3,378.95 3,537.95

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

2017-1256

ELECTRICAL

DS-194431 1101-0009

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES 2017-1297

BRAKES

2017-1280

6-SPEED EVOLUTION-STYLE TRANSMISSION ASSEMBLIES •Available in wrinkle-black, polished or chrome finish for most 90-99 Evolution Softail, FXR and FLT models •Chrome and polished Softail transmissions feature billet cases; all others use stock-style cases •Gear ratio of 2.94 or 3.24 1st gear and .86 or .80 6th gear are available; .80 6th is recommended for 113” and larger motors •Significantly smoother shifting than stock due to a roller detent shift drum with reduced inertia and gear dog teeth with lead-in ramping •Transmissions come with MSO •Made in the U.S.A.

TANKS & OIL FILTERS DASHES & GAUGES

NOTE: Exhaust bracket may require modification when using these transmissions. NOTE: All transmissions will require the use of a late-style front pulley. PART # DESCRIPTION SUG. RETAIL FOR 98-99 FXST/FLST 2017-1256 Wrinkle-black case w/ 2.94 1st and .86 6th $3,378.95 1101-0016 Polished case w/ 2.94 1st and .86 6th 4,032.95 1101-0015 Chrome case w/ 2.94 1st and .86 6th 4,106.95 FOR 90-97 FXST/FLST DS-194520 Wrinkle-black case w/ 3.24 1st and .86 6th 3,378.95 DS-194431 Wrinkle-black case w/ 3.24 1st and .80 6th 3,378.95 1101-0010 Polished case w/ 2.94 1st and .86 6th 4,032.95

PART # DESCRIPTION FOR 98-99 FXST/FLST (CONT) 1101-0014 Polished case w/ 3.24 1st and .80 6th 1101-0009 Chrome case w/ 2.94 1st and .86 6th FOR 93-97 FLT 2017-1297 Wrinkle-black case w/ 2.94 1st and .86 6th FOR 90-92 FLT, 90-94 FXR 2017-1280 Wrinkle-black case w/ 3.24 1st and .86 6th 2017-1283 Polished case w/ 3.24 1st and .86 6th

SUG. RETAIL $4,032.95 4,106.95 3,640.95 3,378.95 3,528.95

RESULTANT RPM CHANGE BETWEEN STANDARD 5TH GEAR AND BAKER 6TH GEAR (5TH GEAR RATIO IN A 5-SPEED IS THE SAME AS 5TH GEAR IN THE 6-SPEED OVERDRIVE (1:1)) NOTE: Calculated data based on a 24/37 primary, 32/70 final reduction and a 25” dia. rear tire. MPH 65 70 75 80

RPM IN 5TH GEAR (1:1 RATIO) 2945 3172 3398 3625

RPM IN 6TH GEAR (.86:1 RATIO) 2533 2728 2923 3118

RPM REDUCTION (.86:1 RATIO) 412 444 475 507

All part numbers in BOLD MAGENTA are new for 2010.

RPM IN 6TH GEAR (.80:1 RATIO) 2356 2537 2718 2900

RPM REDUCTION (.80:1 RATIO) 589 635 680 725

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

453


SECTION

8

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS 6-SPEED RIGHT-SIDE DRIVE TRANSMISSIONS

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

•RSD6 has the same trap door thickness as RSD5 and is compatible with all RSD Evolution-style frames •Available with a cable shroud or a hydraulic shroud •An 11/16” or larger master cylinder is recommended for use with the hydraulic clutch actuator •Come with an 80-97 style single pole neutral switch, a 32T transmission pulley and provision for speedometer sensor •Work in conjunction with all OEM primary components •Made in the U.S.A.

1101-0005

2017-1319

PART # DESCRIPTION W/ CABLE SHROUD 1101-0006 Chrome billet case 2017-1319 Wrinkle-black stock-style case GEAR 1st

RATIO 2.94

GEAR 2nd

RATIO 2.21

SUG. RETAIL $4,834.95 3,268.95 GEAR 3rd

RATIO 1.60

PART # DESCRIPTION W/ HYDRAULIC SHROUD 1101-0005 Chrome billet case 2017-1322 Wrinkle-black stock-style case GEAR 4th

RATIO 1.23

GEAR 5th

RATIO 1.00

SUG. RETAIL $4,834.95 4,202.95 GEAR 6th

RATIO .87

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS 1101-0040

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

454

1101-0041

TORQUEBOX 6-SPEED TRANSMISSIONS •The Torquebox makes the jump from the 21/2” transmission standard to a full 3” center-distance between the two shafts – increasing the torque handling capacity to 250 ft-lb. •Torquebox features include a billet aluminum transmission case; 2” dia. shift drum; ratchet pawl with overshift inhibitor and 65% larger shaft; top mounted ignition kill and neutral switches for easy adjustments; frictionless detent system; 9310 steel shafts and 8620 steel gears with double-thick, heat-treated teeth and a 23T 1/2” offset sprocket •Baker’s dual-rail shift forks and a shift system lever ratio that is 35% under stock for tight, short shifts •All frame, starter and clutch interfaces are identical to stock-based designs •Available as a right- or left-side drive; both versions are identical except for the mainshaft •Available with R-ratio or Z-ratio gears •Made in the U.S.A. PART # DESCRIPTION LEFT-SIDE DRIVE FOR 90-99 FXST/FLST 1101-0041 R-ratio

SUG. RETAIL $5,094.95

PART # DESCRIPTION RIGHT-SIDE DRIVE FOR CUSTOM APPLICATIONS 1101-0040 R-ratio 1101-0042 Z-ratio

SUG. RETAIL $5,594.95 5,594.95

RATIO CHART GEAR 1st 2nd

R-RATIO 2.75 2.05

Z-RATIO 2.61 1.89

GEAR 3rd 4th

R-RATIO 1.55 1.18

Z-RATIO 1.50 1.12

GEAR 5th 6th

All part numbers in BOLD MAGENTA are new for 2010.

R-RATIO 1.00 .86

Z-RATIO 1.00 .95


SECTION

8

WINDSHIELDS TOURING

1101-0035

6-SPEED RIGHT-SIDE-DRIVE TRANSMISSIONS •Innovative design that is both durable and very strong •Twin Cam models are shipped with stock chrome top covers •Evolution models are shipped with CNC machined billet aluminum top cover •Output main shaft support bearing that minimizes flexing of the main shaft •Built in oil pump for lubrication of the output main shaft bearing •All parts are made in the USA and assembled in JIMS technologically advanced facility

LUGGAGE SEATS & SISSY BARS EXHAUST

NOTE: RSD transmissions are not compatible with stock chassis and modifications will be necessary. PART # DESCRIPTION FOR 00-06 RSD TWIN CAM-STYLE SOFTAIL APPLICATIONS 1101-0035 Black w/ mechanical clutch 1101-0036 Black w/ hydraulic clutch FOR 90-99 RSD EVOLUTION-STYLE SOFTAIL APPLICATIONS 1101-0031 Black w/ mechanical clutch 1101-0033 Black w/ hydraulic clutch 1101-0034 Polished w/ hydraulic clutch GEAR RATIO 1 2.94

GEAR RATIO 2 2.21

SUG. RETAIL

FUEL/AIR SYSTEMS

$3,902.95 3,902.95 3,285.95 3,285.95 3,448.95

GEAR RATIO 3 1.57

ENGINE GEAR RATIO 4 1.23

GEAR RATIO 5 1.00

GEAR RATIO 6 .86:1 (overdrive)

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

DS-325854

6-SPEED OVERDRIVE TRANSMISSIONS

1101-0030

•Come with close-ratio 1st gear, stock 2nd through 5th gears and .86:1 “overdrive” 6th gear •Made of 8620 steel •Gears are CNC-machined; shifter dogs are machined with lead-in ramps for better and quicker shifting •For use with 91-99 Evolution motors, but will fit earlier years if used with 91-or-later starter motor, clutch and inner- and outer-primary drive systems •Require a clutch-release rod and bearing, final drive sprocket and transmission lube (JIMS recommends Bel-Ray 85-140 gear lube); all sold separately •All parts are made in the U.S.A. and assembled in JIMS technologically advanced facility PART # DESCRIPTION FOR 91-99 SOFTAIL (JIMS® CASE) DS-325854 Plain aluminum case

SUG. RETAIL $2,392.95

PART # DESCRIPTION FOR 91-99 SOFTAIL (JIMS® CASE) (CONT) 1101-0030 Polished aluminum case

SUG. RETAIL $2,602.95

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1101-0039

6-SPEED TRANSMISSION •Designed to handle the power of big-inch S&S motors •All helical gears for quiet operation and less backlash – easier to maneuver at low speeds •Dogless, low-inertia, high-aperture-ratio shifting rings, and roller shift detent for smooth positive shifting •Supplied with an ultralight 34-tooth front pulley for the optimum final-drive ratio with stock rear pulley; pulley is 30% lighter than stock •Gear ratios are 3.88 1st gear, 2.65 2nd gear, 1.94 3rd gear, 1.47 4th gear, 1.17 5th gear and 1.00 6th gear. •Made in the U.S.A. PART # DESCRIPTION 91-99 FXST/FLST 1101-0037 Natural aluminum

SUG. RETAIL $2,420.95

PART # DESCRIPTION 91-99 FXST/FLST (CONT) 1101-0038 Black wrinkle powdercoat

SUG. RETAIL

PART # DESCRIPTION 91-99 FXST/FLST (CONT) 1101-0039 Polished

$2,517.95

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $2,663.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

455


SECTION

8

WINDSHIELDS TOURING TORQUEBOX 5-SPEED TRANSMISSIONS

LUGGAGE SEATS & SISSY BARS EXHAUST

•The Torquebox makes the jump from the 21/2” transmission standard to a full 3” centerdistance between the two shafts – increasing the torque handling capacity to 250 ft-lb. •Torquebox features include a billet aluminum transmission case; 2” dia. shift drum; ratchet pawl with overshift inhibitor and 65% larger shaft; top mounted ignition kill and neutral switches for easy adjustments; frictionless detent system; 9310 steel shafts and 8620 steel gears with double-thick, heat-treated teeth and a 23T 1/2” offset sprocket •Baker’s dual-rail shift forks and a shift system lever ratio that is 35% under stock for tight, short shifts •All frame, starter and clutch interfaces are identical to stock-based designs RATIO CHART •Available with Z-ratio gears •Made in the U.S.A. GEAR Z-RATIO GEAR PART # 1102-0024

DESCRIPTION For right-side drive custom applications

SUG. RETAIL $5,194.95

1st 2nd

2.61 1.89

FUEL/AIR SYSTEMS

Z-RATIO 1.50 1.12

3rd 4th

GEAR 5th

7806-1231

Z-RATIO 1.00

7806-1232

ENGINE TRANSMISSION & DRIVELINE 5-SPEED TRANSMISSIONS GASKETS & SEALS ELECTRICAL

•Feature Baker roller detent shift system, Baker billet steel hard chrome-plated shift forks and 6061 T-6 billet aluminum shift door •Available with a 2.94:1 1st gear ratio •Can be used for stock replacements for years listed or in custom applications •Made in the U.S.A. PART # FOR 90-97 FXST/FLST 1102-0011 7806-1231

DESCRIPTION Polished Black

SUG. RETAIL $2,398.95 2,100.95

PART # FOR 90-94 FXR 7806-1232 7806-1233

DESCRIPTION Polished Black

SUG. RETAIL $2,184.95 2,149.95

LIGHTING 1102-0019

HANDLEBARS, CONTROLS & MIRRORS

FAT FIVE™ 5-SPEED OVERDRIVE TRANSMISSIONS

CABLES

•Strongest and toughest gear box made •Compact shifter technology allows for increased gear width and strength •Gear width increased 18% to 53% •Available with mechanical clutch activated system only •Completely assembled and installed in case •2.91 1st gear ratio and .886:1 “overdrive” 5th gear •All parts are made in the U.S.A. and assembled in JIMS technologically advanced facility

BRAKES

NOTE: Does not include pulley.

TANKS & OIL FILTERS DASHES & GAUGES

NOTE: Modifications to exhaust bracket may be necessary. PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION FOR 00-06 FXST FOR 90-99 FXST 1102-0019 Black $3,297.95 1102-0021 Polished

$3,155.95

DS-325771 1101-0029 DS-325777

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, 5-SPEED TRANSMISSION ASSEMBLIES TUBES & •Gears and shafts are CNC-machined from materials that exceed 8620 steel WHEELS •Hand-assembled and matched for a .0002” tolerance between the shafts •Assemblies include chrome trap door, side cover, top cover and hardware HARDWARE, •Available with standard or close-ratio first-gear sets CHEMICALS •All parts are made in the U.S.A. and assembled in JIMS Machining’s technologically advanced facility DESCRIPTION SUG. RETAIL PART # DESCRIPTION & TOOLS PART # 90-99 SOFTAIL 5-SPEED FOR USE IN A 4-SPEED RIGID-MOUNT FRAME $2,170.95 (70-E84 KEYED MAINSHAFT) COVERS, DS-325771 Plain aluminum case, standard ratio Plain aluminum case, standard ratio 2,259.95 DS-325777 SECURITY 1101-0029 Polished aluminum case, close ratio DS-325778 Plain aluminum case, close ratio & GENERAL

456

SUG. RETAIL

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL

$2,327.95 2,344.95


SECTION

8

WINDSHIELDS TOURING 7-SPEED TRANSMISSION GEAR SET •Direct replacement of the Cruise Drive Harley-Davidson factory 6-speed •The 7th gear enables the motorcycle to make full use, by way of gear ratio management, of the torque and power put out by the new 96 ci and 110 ci motors •Unlike the stock mainshaft which includes 1st through 4th gears, the DD7 is lightweight and only includes the small 1st gear, minimizing the shift clunk •Features a shortened 1st gear and tightened all other gears for a smooth and powerful riding experience with continuous acceleration from 1st to 4th gear •Shift smoothness is achieved by use of a new linear roller ball detent which is part of the supplied billet top cover •Comes ready to slide in the bike, no case modifications, shimming of the gear set or adjustments required •7th main drive gear, main drive gear bearing, main drive seal are all included to replace 6th main •ARP 12pt bolts for door, top cover, stock side cover, Baler re-cal box and leads all included •Re-uses stock shifter pawl. Includes new Main drive gear bearing and seal, door gasket, side cover gasket and top cover gasket •Utilizes F6F door bearing retainer plate PART # DESCRIPTION •DD7 door bearings are 28% wider than stock 1103-0013 For 06-10 FXD, FXDWG, 07-10 FLHT, FLHR, FLHX, FLTR, 07-10 FXST, FLST •Made in the U.S.A.

LUGGAGE SEATS & SISSY BARS EXHAUST SUG. RETAIL $2,995.95

FUEL/AIR SYSTEMS

RATIO CHART GEAR 1st 2nd

STOCK RATIOS 3.34 2.30

DD7 RATIOS 3.76 2.75

GEAR 3rd 4th

STOCK RATIOS 1.71 1.41

DD7 RATIOS 2.06 1.55

GEAR 5th 6th

STOCK RATIOS 1.18 1.00

DD7 RATIOS 1.27 1.10

GEAR 7th

STOCK RATIOS -

DD7 RATIOS 1.00

FRANKENTRANNY 6-SPEED BUILDER’S KITS

TRANSMISSION & DRIVELINE

•Gearset is assembled and ready to install •Existing transmission case does not need to be removed from the chassis •Kit includes maindrive gear bearing, snap ring, sprocket spacer, seal, fasteners, fork rod (short), gaskets and complete gear cluster •500 RPM reduction in cruising RPM on highway with a .86 6th gear ratio •93-06 FLT, FLHT, FLHR, FLHX, FLTR models require a Baker Function Formed™ oil spout; sold separately, see TANKS & OIL FILTERS section •Made in the U.S.A.

GASKETS & SEALS ELECTRICAL

NOTE: Kickstart covers and kickarms must be purchased separately. Kickstart covers are available in hydraulic clutch style (PART #1112-0028) or mechanical clutch style (PART #1112-0029); see page 471. Kickarms are available in std. length (PART #1112-0026) or 1” extended length (PART #1112-0027); see page 472

LIGHTING

NOTE: 99-06 Twin Cam applications will require ignition conversion to Evolution style ignition. Fuel injection models will need to be converted to carb.

HANDLEBARS, CONTROLS & MIRRORS

1103-0015

NOTE: Exhaust systems may require modifications to fit with these kits. PART # DESCRIPTION 1103-0016 For 00-06 FXST, FLST, 01-05 FXD, FXDWG, 01-06 FLHT, FLHR, FLHX, FLTR 1103-0015 For 98-99 FXST, FLST, 98-00 FLT, FLHT, FLHR, FLTR, FXD, FXDWG 1103-0014 For 90-97 Big Twin models

SUG. RETAIL $2,395.95 2,395.95 2,395.95

OVERDRIVE 6-SPEED GEAR SET KITS FOR TWIN CAM •Include all gears, mainshaft, countershaft, shifter drum, detent components, bearings, snap rings, gaskets and hardware •Significantly smoother shifting than stock due to a roller detent shift drum with reduced inertia and gear dogteeth with lead-in ramping •Gear ratio of 2.94 or 3.24 1st gear and .87 6th gear available •Fit into stock and most aftermarket 5-speed transmission cases •Made in the U.S.A.

TANKS & OIL FILTERS DASHES & GAUGES

NOTE: Exhaust bracket may require modification when using these kits. PART # DESCRIPTION FOR 00-06 FXST/FLST, 01-05 FXD/FXDWG DS-194521 Gear set w/ 2.94 first/.87 sixth $2,400.95 DS-194522 Gear set w/ 3.24 first/.87 sixth 2,400.95 DS-194404 Gear set w/ 3.24 first/.80 sixth 2,400.95 FOR 99-00 FXD/FXDWG DS-194523 Gear set w/ 2.94 first/.87 sixth 2,400.95

CABLES BRAKES

2017-1309

SUG. RETAIL

ENGINE

SUG. RETAIL

PART # DESCRIPTION FOR 02-06 FLT 2017-1309 Gear set w/ 2.94 first/.87 sixth $2,512.95 2017-1314 Gear set w/ 3.24 first/.87 sixth 2,512.95 FOR 01 FLT 2017-1308 Gear set w/ 2.94 first/.87 sixth 2,512.95 2017-1313 Gear set w/ 3.24 first/.87 sixth 2,512.95

SUG. RETAIL

PART # DESCRIPTION FOR 99-00 FLT 2017-1307 Gear set w/ 2.94 first/.87 sixth $2,512.95 2017-1312 Gear set w/ 3.24 first/.87 sixth 2,512.95

RESULTANT RPM CHANGE BETWEEN STANDARD FIFTH GEAR AND BAKER SIXTH GEAR (FIFTH GEAR RATIO IN A 5-SPEED IS THE SAME AS FIFTH GEAR IN THE 6-SPEED OVERDRIVE (1:1)) NOTE: Calculated data based on a 24/37 primary, 32/70 final reduction and a 25” dia. rear tire. RPM IN FIFTH GEAR RPM IN SIXTH GEAR RPM REDUCTION MPH (1:1 RATIO) (86:1 RATIO) (86:1 RATIO) 65 2945 2533 412 70 3172 2728 444 75 3398 2923 475 80 3625 3118 507

All part numbers in BOLD MAGENTA are new for 2010.

RPM IN SIXTH GEAR (80:1 RATIO) 2356 2537 2718 2900

RPM REDUCTION (80:1 RATIO) 589 635 680 725

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

457


SECTION

8 1103-0002

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

DIRECT DRIVE 6-SPEED GEAR SET KITS •Fit into existing 5-speed cases; lower the rpm at cruising speeds •Include a 6-speed gear set (3.24:1 1st gear/.86:1 6th gear), 28-tooth motor sprocket, longer primary chain, fixed spindle-shift drum and anti-overshift ratchet shift pawl assembly •All gears are full-width Baker ground gears; 4th, 5th and 6th gears are helical for silent operation •Include easy-to-follow instructions •Replacement primary shoe available separately; designed for use with tensioner bracket OEM #39990-01 •Made in the U.S.A. PART # DESCRIPTION FOR FXST/C/S, FLST/C/N/F/D/S 1103-0005 00-06 models 1103-0003 98-99 models 1103-0001 90-97 models FOR FXD/FXDWG 1103-0005 01-05 models

SUG. RETAIL $2,596.95 2,596.95 2,596.95 2,596.95

ELECTRICAL

SUG. RETAIL $2,596.95 2,596.95

PART # DESCRIPTION SUG. RETAIL FOR FLT, FLHT, FLHS, FLHR, FLTR, FXR (CONT) 1103-0002 90-97 models $2,596.95 REPLACEMENT PRIMARY SHOE 1120-0220 “Fat Shoe” repl. primary shoe 42.95

2,596.95 2,596.95

RESULTANT RPM CHANGE BETWEEN STANDARD FIFTH GEAR AND BAKER SIXTH GEAR (FIFTH GEAR RATIO IN A 5-SPEED IS THE SAME AS FIFTH GEAR IN THE 6-SPEED OVERDRIVE (1:1) AND BAKER DD6) NOTE: Resultant rpm change between standard 5th gear and Baker 6th gear (5th gear ratio in a 5-speed is the same as 5th gear in the 6-speed overdrive (1:1) and Baker DD6). MPH

RPM IN 5TH GEAR (1:1 RATIO)

RPM IN 6TH GEAR (.86:1 RATIO)

RPM REDUCTION (.86:1 RATIO)

RPM IN 6TH GEAR (.80:1 RATIO)

RPM REDUCTION (.80:1 RATIO)

RPM IN 6TH (DD6)

RPM REDUCTION (DD6)

65 70 75 80

2945 3172 3398 3625

2533 2728 2923 3118

412 444 475 507

2356 2537 2718 2900

589 635 680 725

2528 2723 2917 3112

417 440 481 513

TRANSMISSION & DRIVELINE 6-SPEED OVERDRIVE SUPER KITS GASKETS & SEALS

PART # DESCRIPTION FOR FXD/FXDWG (CONT) 1103-0003 98-00 models 1103-0001 91-97 models FOR FLT, FLHT, FLHS, FLHR, FLTR, FXR 1103-0006 01-06 models 1103-0004 98-00 models

•Designed to turn stock 5-speed transmissions into a 6-speed •Reduces vibration that creates wear •Creates a more relaxing cruising speed •All gear sets use 2.94:1 close-ratio 1st gear that widens bike’s speed range in 1st gear and lessens the rpm drop when shifting into second •Overdrive 6th gear (.86:1 ratio) lowers engine rpm by almost 475 at 75 mph •Made in the U.S.A.

1103-0008

NOTE: Requires speedometer sensor block-off plate kit (#2404-0114; see Electrical section); if speedometer is not driven from transmission, then two block-off plates kits are required. NOTE: Requires speedometer be recalibrated.

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

NOTE: Trap door extends 3/8” farther to right than stock part. Alteration to some parts that attach to or around the trap door may be required. NOTE: When installing in 02-06 FLHT/FLHR/FLTR/FLHX transmission case, you will need an oil filler spout spacer (#DS-196233; see ELECTRICAL section) for clearance transmission to motor vent line. PART #

DESCRIPTION

SUG. RETAIL

1103-0009 For 02-06 FXST/FLST, 01-06 FLHT/FLHR/FLTR/FLHX, 01-05 FXD/FXDWG

$2,295.95

PART #

DESCRIPTION

SUG. RETAIL

1103-0008 For 90-99 FXST/FLST/FXR, 91-00 FXD/FXDWG, 00 FLHT/FLHR/FLTR

6-SPEED GEAR SETS FOR EVOLUTION BIG TWIN MODELS

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

DS-194407

•Kits turn stock 5-speed transmissions into 6-speeds •Gear sets fit directly into your existing 5-speed case •Ratio of 2.94 or 3.24 1st gear and .86 or .80 6th gear; .80 6th gear is recommended for 113” or larger motors •Significantly smoother shifting than stock due to a roller detent shift drum with reduced inertia and gear dogteeth with lead-in ramps •Kits include chrome-plated, billet-aluminum trap doors with the gears assembled to them as cartridge-style units, forks, shifter drum, pillow blocks with roller detent, fasteners, gaskets and instructions •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 98-99 FXST/FLST, 98 FXD/FXDWG, 99 FXR 2017-1310 2.94 first/.86 sixth $2,400.95 2017-1316 3.24 first/.80 sixth 2,400.95

PART # DESCRIPTION FOR 90-97 FXST/FLST, 90-92 FLT, 91-97 FXD/FXDWG, 90-94 FXR DS-194526 2.94 first/.86 sixth DS-194527 3.24 first/.86 sixth DS-194405 3.24 first/.80 sixth

SUG. RETAIL

$2,400.95 2,400.95 2,400.95

PART # FOR 93-97 FLT DS-194530 DS-194531 DS-194407

$2,218.95

DESCRIPTION 2.94 first/.86 sixth 3.24 first/.86 sixth 3.24 first/.80 sixth

DS-326101

SUG. RETAIL $2,512.95 2,512.95 2,512.95

FRAMES, 6-SPEED TRANSMISSION GEAR SET FOR XL AND BUELL SUSPENSION •Gear set reduces the rpm at highway speed, adding life to the motor & FENDERS •Includes gears, trapdoor, shifter drum, shifter forks and derby cover •Redesigned shift drum and detent plate supply improved geometrics for smoother shifting FOOTRESTS •Gears are full-width for uncompromised torque capacity and strength & LICENSE •For ease of installation use existing main drive gear set (you do not have to remove the main 5th gear from the case) PLATE FRAMES •Made in the U.S.A. NOTE: It is recommended that for 94 applications the newer style gears (95-02) be used (OEM #35034-94 mainshaft 5th TIRES, gear and 35633-94 5th gear countershaft). Using earlier gears may cause a gear whine, but will in no way cause a mechanical problem. TUBES & NOTE: Installation of this kit requires the removal of some case material and H-D special tools. WHEELS PART # DESCRIPTION SUG. RETAIL 7806-1275 For S&S XL motor $2,581.95 RPM CHART HARDWARE, For 95-03 XL, Buell 2,582.95 NOTE: Data based on a 56/35 primary reduction, 61/27 secondary CHEMICALS DS-326101 reduction and a 25” dia. rear tire. RATIO CHART & TOOLS RPM IN RPM IN RPM RPM IN RPM IN RPM STOCK BAKER STOCK BAKER STOCK BAKER FIFTH SIXTH REDUCTION MPH FIFTH SIXTH REDUCTION COVERS, GEAR 5-SPEED XL6 SPEED GEAR 5-SPEED XL6 SPEED GEAR 5-SPEED XL6 SPEED MPH 65 3162 2719 443 75 3648 3137 511 3rd 1.43 1.44 5th 1.00 1.00 SECURITY 1st 2.69 2.52 70 3405 2928 447 80 3891 3346 545 4th 1.18 1.18 6th N/A 0.86 & GENERAL 2nd 1.97 1.96

458

All part numbers in BOLD MAGENTA are new for 2010.


SECTION 1103-0012

8

WINDSHIELDS

1103-0007

TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE 6-SPEED GEARSET CASSETTE WITH EXTENDED MAINSHAFT

1106-0013

•Helical-gear transmission gearset features a mainshaft with an additional .500” length to accommodate a 200-series wide tire •Mainshaft (also available separately) is designed to work with all S&S helical gear 6-speed transmissions so it can be retrofitted into an existing unit •S&S helical gearset offers a greater contact surface and increased strength over standard cut gears and by design are much quieter •Made in the U.S.A. NOTE: Due to the custom nature of the application of wide-tire kits, the cassette with the longer mainshaft does not include a belt sprocket for the final drive belt. Also, a custom offset sprocket or pulley will be needed to properly align the chain or belt drive. PART # DESCRIPTION SUG. RETAIL 1103-0012 Six-speed gearset w/ +.500” mainshaft for 00-06 Softail, 91-06 FLT models $2,299.95 1106-0013 +.500” mainshaft for S&S 6-speed Evolution transmissions 299.95 and 6-speed gearset w/ standard mainshaft

TRANSMISSION & DRIVELINE

6-SPEED GEAR SET CASSETTE •Includes all the gears and the shifting mechanism, assembled in an S&S 0710-0064 polished trap door •May be installed in stock and most aftermarket transmission cases with only minor modifications •Stock cases must be clearanced for the additional shifting fork •Can also retro fit to 86-90 models with the appropriate late style clutch and starter adapter •Made in the U.S.A. NOTE: FLT owners will need oil filler spacer kit PART #0710-0064 (sold separately) that provides additional clearance between the S&S transmission trap door, vehicle speed sensor, and the engine oil filler neck. PART # 1103-0007 0710-0064

DESCRIPTION For 00-06 Softail, 91-06 FLT models Spacer kit for FLT models

SUG. RETAIL $2,261.95 64.95

GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

1106-0008

F6F GEAR KIT •Tired of the whine from your 5th gear? •Upgrade your ride with the F6F to eliminate the racket and make for a smoother ride with no main shaft walking •Direct bolt-in assembly •Kit includes helical-cut diamond-ground gears, heavy-duty wider bearings, a 1/8” thick bearing retainer plate, and a billet aluminum bearing door •Complete with 12 pt. ARP fasteners and recal box •Installation tool sold separately •Made in the U.S.A. PART # DESCRIPTION FOR 06 FXD, FXDWG AND 07-09 BIG TWIN W/ OEM 6-SPEED TRANSMISSION 1106-0008 F6F Gear Set

SUG. RETAIL

$899.95

BRAKES TANKS & OIL FILTERS PART # DESCRIPTION FOR 06 FXD, FXDWG AND 07-09 BIG TWIN W/ OEM 6-SPEED TRANSMISSION (CONT) 3802-0032 Gear installation tool

F6R REVERSE KIT

SUG. RETAIL

$75.95

1106-0040

•Put the power in your reverse •Includes chrome door and side cover, Cable type countershaft, reverse gears and Hydraulic shift system, safety solenoid and hardware •Chrome door supports the lateral pressure from helical gears with robust plates to replace fragile snap rings •Chrome actuator side cover is available as a cable or hydraulic clutch type •4.98: 1 ratio •Installation instructions included for an easy fit •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 07-08 CRUISE DRIVE® 6-SPEEDS 1106-0040 W/ cable type actuator $1,895.95

type

PART # DESCRIPTION FOR 07-08 CRUISE DRIVE® 6-SPEEDS (CONT) 1106-0041 W/ hydraulic type actuator

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $1,895.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

459


SECTION

8

WINDSHIELDS

7806-1236

5-SPEED TRANSMISSION BUILDER’S KITS •Feature Baker roller detent shift system, Baker billet steel hard chrome-plated shift forks and 6061 T-6 billet aluminum shift door •Gear kits are available with a 2.94:1 1st gear ratio •Fit stock cases and most aftermarket cases •Made in the U.S.A.

TOURING LUGGAGE

PART # 7806-1236 7806-12381 1

SEATS & SISSY BARS

DESCRIPTION For 90-06 FXST/FLST/91-05 DYNA GLIDE/FXR For 93-06 FLT

SUG. RETAIL $1,674.95 1,674.95

Requires 01-06 style neutral switch.

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

FAT 5™ 5-SPEED OVERDRIVE SUPER KITS •Gear cluster is installed into a unique chrome trap door •Designed to slip into stock transmission case •.886:1 “overdrive” 5th gear •Compact shifter technology increases width and strength of every gear •Width increase varies from 18% to 53% depending upon the loads each gear set must carry •Made in the U.S.A.

PART # 1103-0011 1103-0010

DESCRIPTION For 00-06 FXST/FLST, 02-06 FLHT/FLHR/FLTR/FLHX For 90-99 FXST/FLST/FXR, 91-00 FXD/FXDWG, 91-00 FLT/FLHT/FLHR/FLTR

DS-325786

DASHES & GAUGES

5-SPEED CLOSE RATIO GEAR SETS

PART # DS-325787 DS-325786

DESCRIPTION For 90-06 Big Twins w/ 5-speed transmission (except 06 Dyna Glide) For 85-89 Big Twins w/ 5-speed transmission

SUG. RETAIL $1,042.95 1,002.95

5-SPEED GEAR SETS •Gears are made from highnickel alloy steel that is heat-treated and shot-peened for maximum durability and strength •Where applicable, drive dogs have milled lead-in ramps to improve shifting and reduce wear •Sets include gears, mainshaft and countershaft •For ease of installation, use transmission rebuild kits PART #s DS-325781, DS-325780 and DS-325779 •Available in stock or close ratio •Made in the U.S.A. PART # CLOSE RATIO DS-194507 DS-194505 DS-194515

DESCRIPTION SETS (2.94:1 FIRST RATIO) For 91-06 Big Twins (except 06 Dyna Glide) For 90 only Big Twins For 85-89 Big Twins

DS-194509

DS-194507 SUG. RETAIL $963.95 963.95 963.95

PART # STOCK RATIO DS-194508 STOCK RATIO DS-194509

DESCRIPTION SETS (3.24:1 FIRST RATIO) For 91-06 Big Twins (except 06 Dyna Glide) SETS (3.24:1 FIRST RATIO) For 91-05 XL , 94-02 Buell

FRAMES, SUSPENSION & FENDERS DS-194510 FOOTRESTS 4-SPEED GEAR SETS are made from high-nickel alloy steel, & LICENSE •Gears heat-treated and shot-peened to give PLATE FRAMES maximum durability and strength applicable, drive dogs have milled leadTIRES, •Where DS-194498 in ramps to improve shifting and reduce wear TUBES & •Sets include gears, shifter dogs and shifter forks WHEELS •Mainshaft, countershaft, bushings, bearings, snap rings, gaskets and lock washers must be ordered separately •Available in stock or close ratio HARDWARE, •Made in the U.S.A. SUG. CHEMICALS DESCRIPTION RETAIL & TOOLS PART # PART # DESCRIPTION FOR 84 BIG TWIN COVERS, DS-194498 Close ratio set (2.44:1 first gear/ 1.35:1 third gear ratio) $641.95 FOR 86-90 XL SECURITY DS-194497 Stock ratio set (2.60:1 first gear/ 1.23:1 third gear ratio) 641.95 DS-194510 Stock ratio set (2.60:1 first gear/ 1.23:1 third gear ratio), no shafts 38.95 & GENERAL DS-199428 Countershaft for 80-85 Big Twin

460

SUG. RETAIL $2,961.95 2,941.95

•Gears and shafts are made from steel that exceeds 8620 specifications •Sets include all the gears and shafts required to rebuild one transmission •Made in the U.S.A.

HANDLEBARS, CONTROLS & MIRRORS

TANKS & OIL FILTERS

Standard gears

NOTE: Oil filler spout spacer (#DS-196233; see ELECTRICAL section) may be required on 02-06 FL models.

LIGHTING

BRAKES

Fat 5™ gears

NOTE: Modifications to exhaust bracket may be necessary.

ELECTRICAL

CABLES

1103-0011

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $963.95 1,051.95

SUG. RETAIL

$765.95


SECTION

8

WINDSHIELDS 1

11

2

2A

6

8

3

9 5

4

TOURING

10 12

7

8

5 11

13 15

LUGGAGE

5 11

16

17

18 20 22

MAINSHAFTS AND COMPONENTS FOR 5-SPEED BIG TWIN

19

14

SEATS & SISSY BARS

21 23

•Sold individually unless noted

EXHAUST

NOTE: For complete gear sets see page 460 FOR 84-06 BIG TWIN (EXCEPT 06 DYNA GLIDE)

REF # (1) (2) (2A) (3) (4) (5) (6) (7) (8) (9) (9) (9) (9) (9) (9) (10) (11) (12) (12)

PART # DS-193148 DS-193149 DS-197063 DS-188057 DS-199455 DS-194280 DS-199480 DS-199531 DS-189705 DS-199429 DS-199492 DS-199424

OEM # 35078-79 35076-79 8998 35021-89 35028-79A 6003 35025-79B 8876A 35042-91 35042-91 35042-90

DESCRIPTION Nylock nut, 84-06 (10-pk.) Spacer 84-06 (10-pk.) Bearing 84-98 Retaining ring, 84-98 (10-pk.) 4th gear, mainshaft, 84-951 Thrust washer, 84-06 (5-pk.) 1st gear, mainshaft, 84-06 1st gear set, 84-06 (close ratio 2.94) Mainshaft/countershaft bearing, 84-06 Mainshaft splined clutch, 91-06 Mainshaft, 91-06 Mainshaft, 90 only w/ belt drive (not adaptable to earlier years) DS-199491 35042-85 Mainshaft, 85-89 DS-199422 35042-85 Mainshaft, 85-89 w/ belt drive DS-199490 35042-79 Mainshaft, 84 DS-194361 37523-85 Clutch hub key, L84-89 (10-pk.) DS-188022 11067 Main and countershaft snap rings, 84-05 (10-pk.) DS-199486 35027-79B 3rd gear, mainshaft, 84-951 DS-199451 35027-79A 3rd gear, mainshaft, 84-951

SUG. RETAIL (EA.) $2.95 .95 29.95 1.95 60.95 1.95 101.95 148.95 9.95 221.95 276.95 221.95 275.95 221.95 269.95 1.95 1.95 93.95 66.95

REF # (13) (13) (14) (14) (15) (15) (15) (16) (16) (17) (17) (18) (19) (20) (20) (21) (22) (22) (23) (23) 1

5

PART # DS-199483 DS-199450 DS-199488 1106-0036 DS-199457 DS-199454 DS-199452 1106-0009 1106-0039 DS-173536 DS-174475 DS-174378 DS-194053 DS-188036 1106-0042 DS-174387 DS-194088 DS-194476 DS-197053 DS-194281

OEM # 35026-79C 35026-79B 35029-85A 35029-91A 35029-91A 35029-85 35029-79 35051-89 8904 12035A/B 12013A 11162 34091-85 11161 11161 11165 12067A 12050 33334-85 33344-94

SUG. RETAIL (EA.) DESCRIPTION 2nd gear, mainshaft, 84-951 $98.95 2nd gear, mainshaft, 84-951 66.95 5th gear, mainshaft w/ bearings and seal, 85-90 269.95 5th gear, mainshaft w/ bearings and seal, 91-951 269.95 Main drive gear, 91-95 w/ belt drive1 167.95 Main drive gear, 85-90 w/ belt drive 167.95 Main drive gear, E84 w/ chain drive 167.95 Needle bearing, 5th gear mainshaft, 91-06 8.95 Needle bearing, 5th gear mainshaft, 84-90 12.95 Oil seal 91-96 (5-pk.) 2.95 Oil seal, 84-90; (5-pk.) 1.95 O-ring mainshaft, L84 (25-pk.) .95 Bearing inner race, 85-06 24.95 Retaining ring, 84-06 (10-pk.) 5.95 Retaining ring, 84-06 (ea.) 4.95 Mainshaft quad seal, L84-06 (25-pk.) .95 Large mainshaft seal, 95-06 (ea.) 6.95 Large mainshaft seal, L84-94 (ea.) 6.95 Spacer, 84-94 34.95 Spacer, 95-06 25.95

Except 95 FLT models.

2

2A

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

6

CABLES

4

1

FUEL/AIR SYSTEMS

7 8

3

9 10

9

11

BRAKES 12

8

13

7 8

14

TANKS & OIL FILTERS DASHES & GAUGES

COUNTERSHAFT AND COMPONENTS FOR 5-SPEED BIG TWIN •Sold individually, unless noted NOTE: For complete gear sets see page 460 FOR 84-06 BIG TWIN (EXCEPT 06 DYNA GLIDE)

REF # (1) (2) (2A) (3) (4) (5) (5) (6) (7)

PART # DS-193148 DS-193149 DS-197063 DS-188057 1106-0033 DS-199484 DS-199456

OEM # 35078-79 35076-79 8998 35021-89 35629-79 35625-79B 35625-79B/ 35625-79/35628-79 DS-199481 35622-79C DS-194280 6003

DESCRIPTION Nylock nut, 84-06 (10-pk.) Spacer, 84-06 (10-pk.) Bearing 84-98 Retaining ring, 84-98 (10-pk.) 4th gear spacer, 84-06 (5-pk) 4th gear, countershaft, 84-951

SUG. RETAIL (EA.) $2.95 .95 29.95 1.95 4.55 57.95

4th gear, countershaft, 84-951 1st gear, countershaft, 84-06 Thrust washer, 84-06 (5-pk.)

38.95 109.95 1.95

REF # (8) (9) (10) (11) (12) (12) (13) (13) (14) 1

PART # DS-188022 DS-189705 DS-199423 DS-199450 DS-199486 DS-199451 DS-199485 DS-199453 DS-189708

OEM # 11067 8876A 35632-79 35026-79B 35027-79B 35027-79B 35626-79B 35626-79B 8977

Except 95-96 FLT models.

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL (EA.) DESCRIPTION Retaining ring, 84-06 (10-pk.) $1.95 Mainshaft/countershaft bearing, 84-06 9.95 Countershaft, 84-06 92.95 1 3rd gear, countershaft, 84-95 66.95 2nd gear, countershaft, 84-951 93.95 1 2nd gear, countershaft, 84-95 66.95 5th gear, countershaft, 84-951 64.95 38.95 5th gear, countershaft, 84-951 Countershaft bearing left side 84-90 19.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

461


SECTION

8

WINDSHIELDS TOURING 14

LUGGAGE

15

12

SEATS & SISSY BARS

1 2

3

4

5

11 13

7 9

16

8

EXHAUST

10 6

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

MAINSHAFTS AND COMPONENTS •Sold individually unless noted FOR 84-86 FOUR-SPEED BIG TWIN

REF # PART # (1) DS-199419 (2) DS-191007 (3) 1106-0011 (4) DS-194283 (5) DS-199406 (5) DS-199407 (6) DS-199411

OEM # 35046-36 35050-40 9020 35100-79 -

(7) (8)

DS-199415 35306-59 DS-199404 -

(9)

DS-195164 35365-36

(9)

DS-195165 35365-36

(9)

DS-195166

DESCRIPTION Mainshaft bearing nut, 84-86 Mainshaft lock tab, 84-86 Mainshaft bearing right side, 84-86 Bearing housing, 84-85 2.44:1 1st gear (set) 2.60:1 1st gear (set) 1st and 2nd gear set 84 (close ratio) (2.24 1st gear/1.65 2nd gear) 3rd gear mainshaft, 84-86 1.35:1 3rd gear set, 84-86 (caged roller style) (close ratio) 2nd/3rd gear mainshaft washer (std.) (5-pk.) 2nd/3rd gear mainshaft washer (-.005) (5-pk.) 2nd/3rd gear mainshaft washer (+.005) (5-pk.)

SUG. RETAIL (EA.) $5.95 .95 9.95 46.95 115.95 115.95 208.95 66.95 220.95

REF # PART # OEM # (9) DS-195167 (9) (10) (11) (12) (13) (14)

5.95

(15)

5.95

(15)

5.95

(16)

DESCRIPTION 2nd/3rd gear mainshaft washer (+.010) (5-pk.) DS-195168 2nd/3rd gear mainshaft washer (+.015) (5-pk.) DS-188067 35337-36 Mainshaft third gear snap rings, 84-85 (10-pk.) DS-199425 35440-38 Mainshaft clutch gear, 84-E86 DS-194126 35094-65 Eastern MC Parts main drive gear bushing, 84-86 DS-199409 35067-77/84 Andrews 4th gear mainshaft, 84-86 DS-195162 35131-36 Eastern MC Parts retaining washers, Std. (5-pk.) DS-196237 35070-84 Eastern MC Parts spacer, main drive gear L84-86 (ea.) DS-196236 35070-82A Eastern MC Parts spacer, main drive gear E84 (ea.) DS-194468 37741-82 James mainshaft oil seal (large), 84-86 (ea.)

SUG. RETAIL (EA.) $5.95 5.95 .95 38.95 19.95 145.95 5.95 28.95 29.95

6.95

CABLES 5 10

BRAKES

11

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

462

1

2

3 4

6

7

12

14

13

8 9

COUNTERSHAFT AND COMPONENTS •Sold individually unless noted FOR 84-86 FOUR-SPEED BIG TWIN

REF # PART # OEM # (1) DS-191006 33082-16 (2) (3) (4) (5) (6) (7)

DESCRIPTION Locking tab countershaft nut, 84-86 (10-pk.) DS-195160 35875-36 Countershaft gear end washer set 84-87 (7-pk.) DS-194135 35789-36 1st and reverse gear countershaft bushing, 84-86 DS-195169 35812-36 Thrust washer 1st gear countershaft, 84-86 (5-pk.) DS-199420 35665-36A 1st and 2nd gear countershaft clutch gear, 84-86 DS-188069 35810-36 Countershaft 2nd gear snap rings, 84 (10-pk.) DS-195161 35811-36 1st and 2nd gear countershaft washer, 84-86 (5-pk)

SUG. RETAIL (EA.)

REF # PART # OEM # (8) DS-194132 35791-36

$.95 32.95

(9)

15.95

(10)

4.95

(11)

38.95

(12) (13)

1.95 (14)

DESCRIPTION 1st and 2nd gear countershaft bushing, 84-86 DS-195171 35917-36 Inner retaining washer countershaft, 84-86 (5-pk.) DS-199427 35700-76 Stock cluster gear only, 84-86 (ea.) (1.23 ratio) DS-195170 359185-36 4th gear countershaft outside retaining washer, 84-86 (5-pk.) DS-199428 35614-80 Countershaft, 84-86 DS-196172 36048-76A Countershaft bushing, 84-86, clutch side; 84-86, starter side DS-174377 11115 O-ring, countershaft, 84-86 (25-pk.)

5.95

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL (EA.) $15.95 4.95 145.95 4.95 38.95 13.95 .95


SECTION

8

WINDSHIELDS TOURING

11

1

2

3

5 6 7 4

6

8

10

9

LUGGAGE

11 10

SEATS & SISSY BARS

10

EXHAUST FUEL/AIR SYSTEMS ENGINE MAINSHAFT AND COMPONENTS

TRANSMISSION & DRIVELINE

•Sold individually unless noted NOTE: For gears see page 460 FOR 91-10 REF # (1) (1) (2) (3) (4) (4) (5) (6) (7) (8) (9) (10) (11)

XL PART # 0935-0123 DS-194088 DS-193155 DS-174387 DS-188036 1106-0042 DS-194418 1106-0009 0935-0362 DS-199469 DS-199467 DS-188022 DS-189705

OEM # 12074 12067A 33344-85 11165 11161 11161 12030 35051-89 11113 35034-89A 35771-89 11067 8876A

DESCRIPTION Oil seal, 06-10 Oil seal, 95-05 Mainshaft spacer, 91-93 Quad seal 91-06 (10-pk.) Mainshaft ball bearing snap rings, 91-10 (5-pk.) Mainshaft ball bearing snap rings, 91-10 Oil seal, 91-10 (5-pk.) Needle bearing, 5th gear mainshaft 91-06 5th gear transmission O-ring, 06-10 (10-pk.) 5th gear mainshaft drive gear, 91-95 2nd gear mainshaft, 91-95 Main and countershaft snap rings, 91-10 (10-pk.) Bearing, mainshaft, 91-05

SUG. RETAIL (EA.) $6.95 6.95 25.95 .95 5.95 4.95 2.95 8.95 .95 178.95 79.95 1.95 9.95

GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

4

2

1

4

2

TANKS & OIL FILTERS

4 3

DASHES & GAUGES

COUNTERSHAFT AND COMPONENTS •Sold individually unless noted NOTE: For gears see page 460 FOR 91-10 REF # (1) (2) (3) (4)

XL PART # DS-189708 DS-189705 DS-199467 DS-188022

OEM # 8977 8876A 35771-89 11067

DESCRIPTION Bearing, closed end, 91-05 Bearing, countershaft 91-05 3rd gear countershaft, 91-95 Main and countershaft snap-rings, 91-10 (10-pk.)

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL (EA.) $19.95 9.95 79.95 1.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

463


SECTION

8

WINDSHIELDS 3

TOURING

4

1

5 6 8

LUGGAGE

2 10

SEATS & SISSY BARS

7

9

EXHAUST FUEL/AIR SYSTEMS ENGINE

MAINSHAFT AND COMPONENTS FOR 4-SPEED XL •Sold individually unless noted FOR 86-90 XL

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

REF # (1) (2) (3) (4) (5) (6) (7) (8) (9) (9) (10) 1

PART # DS-188040 1106-0010 DS-1994361 DS-199431 DS-199433 DS-199449 DS-199434 DS-194186 DS-194417 DS-194461 DS-193635

OEM # 11180 9025, 9025A 35296-56, 35296-56A 35305-56, 35036-84A 35277-52A 35385-84 12049 35151-74 35154-52

DESCRIPTION Mainshaft ball bearing (outer) snap rings, 86-90 (10-pk.) Mainshaft ball bearing 86-90 Close-ratio gear set, 86-90 2nd gear, 86-90 3rd gear, 86-90 Mainshaft, 86-90 1st gear, 86-90 Mainshaft right-side thrust washers, 86-90 (set of 6, from .067” to .096”) Oil seal, 86-90 (5-pk.) Oil seal, 86-87 (5-pk.) Retainer, 86-90

SUG. RETAIL (EA.) $.95 19.95 287.95 89.95 87.95 182.95 68.95 32.95 2.95 4.95 6.95

87-later models have close-ratio drive gears as new parts.

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES 7 1

BRAKES

2 3

5 4

TANKS & OIL FILTERS

6

DASHES & GAUGES AND FRAMES, COUNTERSHAFT COMPONENTS FOR 4-SPEED XL SUSPENSION •Sold individually unless noted & FENDERS FOR 86-90 XL FOOTRESTS REF # PART # OEM # DS-199439 35695-58 & LICENSE (1) DS-194321 35809-58 PLATE FRAMES (2) (3) DS-199430 35750-58, 35750-58A TIRES, (4) DS-194189 35865-86 DS-194290 8888 TUBES & (5) DS-194189 35865-86 WHEELS (6) (7) 1106-0002 35960-54 HARDWARE, CHEMICALS INTERNAL TRANSMISSION RATIOS & TOOLS GEAR CLOSE FIRST % CHANCE STOCK 2.605 22% 2.925 COVERS, 1st 2.026 27% 2.026 SECURITY 2nd 1.489 18% 1.489 & GENERAL 3rd

464

DESCRIPTION Main drive gear, 86, (27T) 2nd gear spacer, 86-90 (5-pk.) 2nd gear, 86-90 1st gear spacers, 86-90 (6-pk.) Bearing low gear, 86-90 1st gear spacers, 86-90 (6-pk.) Countershaft needle bearing, 86-90

% CHANGE 31% 27% 18%

GEAR 4th 5th

CLOSE FIRST 1.216 1.000

All part numbers in BOLD MAGENTA are new for 2010.

% CHANCE 18% -

STOCK 1.216 1.000

SUG. RETAIL $66.95 5.95 87.95 2.99 7.95 2.99 9.95

% CHANGE 18% -


SECTION 1104-0001

8

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS

TRANSMISSION REBUILD KITS •All-inclusive kit to allow a full transmission rebuild •Includes seals, gaskets and all necessary hardware •Made in the U.S.A. PART # DESCRIPTION 1104-0001 87-06 FXST, FLST, 87-06 FLHR, FLHT, FLTR, FLHX, 87-00 FXR and Baker Drivetrain OD6, DD6, DD5 1104-0002 91-05 FXD, FXDWG and Baker Drivetrain OD6, DD6, DD5

4-SPEED TRANSMISSION REBUILD KIT •Feature JIMS transmission parts and gasket set •Include standard size race, snap rings, clips, shift shaft, countershaft, seals and bushings; everything except bearings •Made in the U.S.A. PART # DESCRIPTION DS-174298 For 84-86 4-speed transmission

EXHAUST SUG. RETAIL $174.95 174.95

FUEL/AIR SYSTEMS ENGINE

ANTI-OVERSHIFT RATCHET SHIFT PAWL ASSEMBLY SUG. RETAIL $176.95

1104-0004

•Features a rectangular cross section shiftershaft spring •Shift-shaft lever splines are hobbed on gear cutter just like Baker gears •With this setup there will be smoother shifts and no more broken shifter-shaft springs •Made in the U.S.A. PART # DESCRIPTION 1110-0015 For 84-00 Big Twin 5-speed transmissions (except 88B)

TRANSMISSION & DRIVELINE GASKETS & SEALS SUG. RETAIL $83.95

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

5-SPEED SHIFTING ASSEMBLY •Reduces shifter free play •Assembly includes plate (replaces OEM #35068-79), spring (#34087-79), pawl plate (#34086-79), shifter shaft (#34084-86), spring (#34083-79), pin (#3408279), washer (#6016) and retaining ring (#11016) •Made in the U.S.A. PART # DS-194066

DESCRIPTION For 84-00 Big Twin 5-speed models (except 00 Softails)

DS-194250

CABLES BRAKES SUG. RETAIL $107.95

TANKS & OIL FILTERS

DS-194251

DASHES & GAUGES

DS-325780

SHIFT FORK SHAFTS

“A CUT ABOVE”™ TIME-SAVER 5-SPEED TRANSMISSION MASTER KITS •Kits include bearings, retaining rings, spacers, locknuts and gaskets and seals for Big Twin •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION SUG. RETAIL 1104-0004 For 99-06 $258.95 DS-325780 For L84-90 $271.95 DS-325781 For 91-98 241.95

•Available as shafts only or as a complete kit •Kit contains shift shaft, O-ring and retaining ring for a complete repair •Made in the U.S.A. PART # DESCRIPTION DS-194250 Shaft for 87-06 Big Twin 5-speed; repl. OEM #34088-87 DS-194251 Shaft kit for 84-86 Big Twin models; repl. OEM #34186-76

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $23.95 30.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

465


SECTION

8

WINDSHIELDS TOURING LUGGAGE SEATS & 5-SPEED SHIFTER UPGRADE KIT SISSY BARS •Upgrades early-model 5-speed Big Twin with the latest technology EXHAUST

•Includes newly designed shift drum and lever assembly with built-in anti-overshift, late-model pillow blocks, case shifter shaft sleeve bushing, hardware and instructions PART # DESCRIPTION •To install shifter sleeve, use PART #3802-0008 1110-0043 For 86-99 FXST, 91-00 Dyna, 84-00 FL •Made in the U.S.A.

SUG. RETAIL $381.95

FUEL/AIR SYSTEMS ENGINE

N1 SHIFTER DRUMS

TRANSMISSION & DRIVELINE 1110-0002

GASKETS & SEALS

1110-0016

ELECTRICAL REVERSE SHIFT PATTERN 5-SPEED SHIFTER DRUM LIGHTING HANDLEBARS, CONTROLS & MIRRORS

•Reverse the shift pattern from one down, four/five up to one up, four/ five down for faster shifts •Includes shifter drum, detent plate and low-effort spring •Made in the U.S.A. PART # 1110-0016 1110-0002

DESCRIPTION For 88-97 Big Twin For 91-03 XL 5-speed, 94-02 Buell 5-speed (except Blast, XB9R)

CABLES

SUG. RETAIL $263.95 280.95

DS-194400

SMOOTH SHIFT KIT

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

SHIFTER DRUM KIT •Shifter drum grooves have been designed for smoother shifting and unneeded material has been removed from the barrel of the drum (less inertia translates to lower shift effort) •Pillow blocks are machined from 6061 T-6 extrusion stock for superior strength •Available as a complete kit or the drum alone •Made in the U.S.A. SUG. PART # DESCRIPTION RETAIL SHIFTER DRUM KIT DS-194401 For all 98-00 Big Twin models (except 00 FXST, FLST) $263.95 DS-194400 For all 88-97 Big Twin models 263.95 DRUM ONLY DS-194403 For all 98-00 Big Twin models (except 00 FXST, FLST) 88.95 DS-194402 For all 88-97 Big Twin models 88.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS FORKS & TOOLS SHIFTER •Made in the U.S.A. DESCRIPTION COVERS, PART # SECURITY FOR 84-86 BIG TWIN 4-SPEED & GENERAL DS-194200 Mainshaft shifter fork; repl. OEM #34158-36 (ea.)

466

•Originally developed for 1110-0039 drag racers and street racers who used Baker’s 1110-0041 6-speed overdrive •N1 shift pattern (neutral-1-2-3-4-5-6) was designed to prevent false neutrals during aggressive 1-2 upshifts by positioning neutral under 1st •Popular choice for jockey shift/foot clutch users •N1 drum used in conjunction with an electric shifter makes finding neutral (with the solenoid) seamless and yields a solenoid-actuated shift system that almost makes foot shifting obsolete •For 5- and 6-speed transmissions •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1110-0039 Fits OD6 (except old 6-into-4 S&S case and Frankentranny) $299.95 1110-0040 Fits old 6-into-4 with S&S case and Frankentranny 299.95 1110-0041 Single pole fits 90-97 299.95 1110-0042 Double pole fits 98-00 (except 00 FXST, FLST) 299.95

•Greatly improves the shift smoothness and the ability to find neutral •Includes shifter drum, billet detent plate and low-effort spring •Detent plate is held in place with machine screws, not a retaining clip •Made in the U.S.A. PART # DESCRIPTION 1811-0007 For 91-03 XL, 94-02 Buell models (except Blast)

SUG. RETAIL $289.95

5-SPEED SHIFTER FORKS •Machined from billet steel and then hard chromed •Cross section is three times thicker than stock forks •Sold as a set (three shifter forks) •Made in the U.S.A. PART # DS-194173

DESCRIPTION For 84-06 Big Twin models (except 06 Dyna Glide); repl. OEM #s 34191-79E, 34193-79E and 34195-79E

SUG. RETAIL $154.95

DS-194200 DS-194210 SUG. RETAIL $12.95

PART # DESCRIPTION SUG. RETAIL FOR 84-86 BIG TWIN 4-SPEED (CONT) DS-194210 Countershaft shifter fork; repl. OEM #34159-36 (ea.) $12.95

All part numbers in BOLD MAGENTA are new for 2010.


SECTION 7808-1001

8

WINDSHIELDS TOURING LUGGAGE

SHIFT FORKS •Available in standard and offset dimensions •Sold individually PART # DESCRIPTION FOR 86-90 XL, XLCH, XLH AND KH MODELS 7808-1001 Std.; repl. OEM #34291-52B 7808-1002 +.005”; repl. OEM #34296-84 7808-1003 -.005”; repl. OEM #34297-84 7808-1004 +.010”; repl. OEM #34294-84 7808-1005 -.010”; repl. OEM #34295-84 7808-1006 +.020”; repl. OEM #34292-72A 7808-1007 -.020”; repl. OEM #34293-72A 7808-1008 +.030” 7808-1009 -.030”

1106-0021 SUG. RETAIL $35.95 35.95 35.95 35.95 35.95 35.95 35.95 35.95 35.95

SEATS & SISSY BARS

SHIFTER FORK SHIMS •Sold in 10-pk. PART # DESCRIPTION FOR 84-86 BIG TWIN 4-SPEED MODELS 1106-0021 .007”; repl. OEM #6750 1106-0022 .015”; repl. OEM #6752

SUG. RETAIL $.95 (ea.) .95 (ea.)

EXHAUST FUEL/AIR SYSTEMS ENGINE

SHIFTER CAM THRUST WASHER SET FOR 5-SPEED •Set includes a 5-pk. of each of these eight sizes •.017” thick; repl. OEM #33205-80 •.020” thick; repl. OEM #33206-80 •.022” thick; repl. OEM #33207-80 •.025” thick; repl. OEM #33208-80 •.028” thick; repl. OEM #33209-80 •.031” thick; repl. OEM #33210-80 •.035” thick; repl. OEM #33211-80 •.040” thick; repl. OEM #33212-80 PART # DESCRIPTION 1106-0035 For 80-08 Big Twin

TRANSMISSION & DRIVELINE GASKETS & SEALS

SHIFTER CAM FOLLOWER •Quality steel, stronger than the aluminum OEM follower PART # DESCRIPTION DS-194225 For 86-90 XL; repl. OEM #34063-84B

SUG. RETAIL $21.95

SUG. RETAIL

ELECTRICAL

$7.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES SHIFTER ROLLER FINGERS FOR 4-SPEED TRANSMISSIONS

SHIFTER SHAFT BUSHINGS

•Manufactured from high-quality steel material for durability and strength •Sold in 10-pk. •Made in the U.S.A. PART # DESCRIPTION DS-193145 For 84-86 Big Twin and 86-90 XL models; repl. OEM #34168-52

•American-made, high-quality replacements •Sold in packs of two •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL DS-194253 For 86-05 XL (inner/outer); repl. OEM #40520-63 $24.95

SUG. RETAIL $1.95 (ea.)

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

TRANSMISSION LOCK TAB WASHERS AND SNAP RINGS •During transmission work, replace the lock tab washers and snap rings •Fit a variety of Big Twin and XL applications; sold in 10-pk. DS-194396 DS-194397 PART # DESCRIPTION DS-191005 Starter clutch tab washers for 84-86 Big Twin 4-sp.; repl. OEM #33396-39 DS-191006 Starter crank tab washers and countershaft lock tab for 84-86 Big Twin 4-sp.; repl. OEM #33082-16 DS-191007 Mainshaft lock washers for 84-86 Big Twin 4-sp.; repl. OEM #35050-40 DS-194397 Eastern MC Parts inner primary lock-tabs for all 87-06 Big Twin; repl. OEM #33318-85 DS-194396 Eastern MC Parts inner primary lock-tabs for 84-86 Big Twin; repl. OEM #7402 DS-188082 Eastern MC Parts inner primary cover snap rings for all 85-06 Big Twin; repl. OEM #60678-85 DS-188023 Eastern MC Parts shifter cam 5-speed snap rings for all 84-99 Big Twin; repl. OEM #11083 1132-0275 Eastern MC Parts clutch ramp lock tab for 86-93 XL; repl OEM #25448-84 1106-0024 Eastern MC Parts shifter cam bolt lock tab for 86-90 XL; repl. OEM #34069-71 1106-0017 Eastern MC Parts inner plunger body lock tab for 84 Big Twin; repl. OEM #33197-79 DS-188018 Eastern MC Parts shifter fork shaft snap rings for 84-86 Big Twin, 86-90 XL; repl. OEM #11036 DS-188057 Eastern MC Parts access door C/S 5-speed snap rings for 91-03 XL; repl. OEM #35021-89

All part numbers in BOLD MAGENTA are new for 2010.

DS-188082 SUG. RETAIL (EA.) $.95 .95 .95 1.95 1.95 1.95 .95 1.55 1.55 .95 .95 1.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

467


SECTION

8

WINDSHIELDS

1106-0002

TOURING

TRANSMISSION BEARINGS/RACE

LUGGAGE

•Made in the U.S.A. PART # DESCRIPTION 1106-0034 Clutch side mainshaft bearing for 84 Big Twin; repl. OEM #8978 1106-0002 Countershaft needle bearing (closed end) for 86-90 XL, XLH; repl. OEM #35960-54

TRANSMISSION MAINSHAFT LOCK NUT SUG. RETAIL $21.95 9.95

SEATS & SISSY BARS

•11/2” left hand threads •Replaces OEM #35211-36 •Sold each PART # DS-189975 2401-0435

DS-189975

DESCRIPTION For 84-86 Big Twin (repl. OEM #35211-36) For 92-10 Big Twin, XL (repl. OEM #35211-91A/B)

SUG. RETAIL $9.95 6.95

DS-325229 DS-325229

EXHAUST 1105-0024

FUEL/AIR SYSTEMS

DS-325217

ENGINE DS-325215

TRANSMISSION & DRIVELINE

TRANSMISSION CASES

56-1027

GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

SOFTAIL TRANSMISSION CASES •Transmission case includes a shifter lever adjustment screw, shifter shaft guide and all studs and dowel pins required for assembly •Bearings and seals are installed •Billet trap door sold separately •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 89-99 SOFTAIL 1105-0023 Transmission case w/ bearing and seal, natural finish $434.95 1105-0024 Transmission case w/ bearing and seal, black finish 537.95 56-1027 Billet trap door kit w/ bearings and hardware 214.95

•Cast in a permanent mold out of 356 T-6 aluminum for superior strength •Machined on a CNC-vertical mill for exact locating and tolerances •Available in a bare case with electric speedo sensor hole or a complete case with trap door and electric speedo sensor hole •Case assemblies with trap door also include trap door bearings, snap rings, main seal, countershaft bearing, shifter bushing and trap-door hardware •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 90-99 FXST AND FLST MODELS DS-325229 Bare case only w/ speedo sensor hole $206.95 DS-325529 Complete case assembly w/ trap door and speedo sensor hole 719.95 DS-325217 Billet trap door only, no bearings; repl. OEM #s 35250-90B and 35261-90A 206.95 FOR 90-94, 99-00 FXR MODELS DS-325664 Bare case only w/ speedo sensor hole 206.95 DS-325215 Bare case only; repl. OEM #s 34705-92/34703-92 (mechanical speedometer only) 206.95 DS-325217 Billet trap door only, no bearings; repl. OEM #s 35250-90B and 35261-90A 206.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

BILLET TRANSMISSION DOORS •Strengthens this critical area and provides rigid support for the transmission shafts •CNC-machined from 7075 T-6 billet aluminum •PART #1106-0008 includes grade 8 mounting hardware, shift drum bushing, main and countershaft ball bearings and circlips installed •PART #1105-0009 includes a double-row mainshaft bearing, spacer and mounting hardware •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL $299.95 1105-0008 For 91-03 883/1200 XL and 94-02 Buell (except Blast) 1105-0009 For 86-90 XL 4-speed 447.95

FRAMES, SUSPENSION & FENDERS 1105-0009 1105-0008 FOOTRESTS & LICENSE PLATE FRAMES 1105-0020 TIRES, TUBES & WHEELS BISAGNO BY ZIPPER’S BILLET TRANSMISSION DOORS •Beautiful transmission door is CNC-machined from billet aluminum with heavy-duty, double-row HARDWARE, bearings for the utmost in strength, shaft alignment and support CHEMICALS •Includes shaft nuts and end spacers polished finish & TOOLS •Brilliant •Made in the U.S.A. DESCRIPTION COVERS, PART # For 87-93 Big Twin 5-speed, 94-06 Softail, FXR and Dyna 5-speed models (except 06 FXD/FXDWG) SECURITY 1105-0019 For 04-06 FLT, FLHT, FLHR and FLTR models & GENERAL 1105-0020

468

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $299.95 299.95


SECTION

8

WINDSHIELDS TRANSMISSION DOOR BEARINGS

TRANSMISSION SIDE COVER

•Sold in pairs •Made in the U.S.A.

•Polished billet transmission side cover to accommodate the use of mechanical clutches with 6-speed transmissions •Compatible with all stock and aftermarket cables •Made in the U.S.A. PART # DESCRIPTION 1107-0116 For stock and aftermarket left-side-drive transmissions for 87-06 Big Twin models (except 06 Dyna)

PART # DESCRIPTION DS-197063 For 84-98 Big Twin, 91-05 XL and Buell 5-speeds; repl. OEM #8998

SUG. RETAIL

$29.95

TOURING

SUG. RETAIL $209.95

DS-326611

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

CHROME BILLET TRANSMISSION TOP AND SIDE COVERS DS-326613 •Machined from 6061 T-6 billet aluminum •Top cover accepts OEM neutral switch; side cover accepts OEM dipstick and internal components •Include mounting hardware 1107-0107 •Made in the U.S.A. PART # DESCRIPTION FOR 87-99 FLT/FLHT, FXST; REPL. OEM #S 34468-86A AND 34464-86A DS-326611 Smooth, top cover FOR 87-06 FLT/FLHT, FXST, FLST AND FXD/FXDWG (EXCEPT 06 DYNA GLIDE); REPL. OEM #37105-87A 1107-0107 Finned, side cover DS-326613 Flame, side cover DS-326614 Smooth, side cover

ENGINE

DS-326614

SUG. RETAIL $194.95 169.95 177.95 177.95

LIGHTING

•Die-cast construction •Sight glass in cover allows you to check transmission oil level at a glance •Made in the U.S.A. with domestic materials only

HANDLEBARS, CONTROLS & MIRRORS

DESCRIPTION For 87-06 FLT, FXST, FLST, FXD and FXDWG (except 06 Dyna)

SUG. RETAIL $260.95

FUNCTION-FORMED™ TRANSMISSION TOP COVER

CABLES

•Function-Formed™ style milled from 6061 T-6 aluminum with a chrome finish •Low-profile external body •12 point stainless steel ARP bolts and gasket included •Made in the U.S.A. PART # 1107-0174

CHROME TRANSMISSION SIDE COVERS

DESCRIPTION For 07-09 FXST, FLST, 06-09 FXD, FXDWG, 07-09 FLHT, FLHR, FLTR, FLHX W/ six-speed OEM transmission

BRAKES SUG. RETAIL

$375.95

•Made from chrome-plated, die-cast zinc PART # DS-325519

GASKETS & SEALS ELECTRICAL

CHROME TRANSMISSION SIDE COVER

PART # DS-375691

TRANSMISSION & DRIVELINE

DESCRIPTION For 87-06 FLT, FXST, FXD and FXDWG models (except 06 Dyna Glide); repl. OEM #37105-87A

DASHES & GAUGES

SUG. RETAIL

1107-0177 $53.95

TRANSMISSION TOP COVERS •Direct replacement covers with an upgrade of style, strength and rigidity •Forged 6061 T-6 aluminum construction with a chrome finish •Also available without neutral switch; offers a clean look without a switch or wires entering the transmission top cover •Made in the U.S.A.

TRANSMISSION VENT COVER •Chrome cover that offers a unique custom look •Eliminates OEM rubber vent hose on top of transmission •Installs in minutes with included instructions •Fits 5- and 6-speed transmissions with OEM top vent hose PART # DESCRIPTION 1105-0007 For 5- and 6-speed Big Twin transmissions

SUG. RETAIL $24.95

PART # DESCRIPTION FOR 91-99 FXST, FLST, FLHT, FLHR, FLHX 1107-0176 W/ neutral switch 1107-0177 W/o neutral switch

All part numbers in BOLD MAGENTA are new for 2010.

TANKS & OIL FILTERS

SUG. RETAIL $184.95 164.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

469


SECTION

8 DS-325530

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS

BILLET TRANSMISSION TOP COVER

1105-0032

•Direct bolt on replacement for OEM cover •Machined from billet aluminum •Hardware included •Matching Nostalgia derby, ignition, and rockerbox covers available separately 1105-0031 •Made in the U.S.A. PART # DESCRIPTION FOR 07-10 FXST/FLST, 07-10 DRESSERS, 06-10 DNYA 1105-0032 Chrome 1105-0031 Contrast Cut™

1105-0018 SUG. RETAIL $229.95 229.95

ENGINE

TRANSMISSION OIL FILL PLUG/DIPSTICK •One-piece billet steel construction that is chrome plated •Indicates fill level of the transmission lube •Includes sealing O-ring •Sold each PART # 1105-0022

DESCRIPTION For 06 Dyna and 07-10 Big Twin

SUG. RETAIL $17.95

TRANSMISSION CHROME BILLET & DRIVELINE DIPSTICK GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

•Easy access 3/4” hex on top for simple socket or wrench removal •CNC-engraved “F” and “A” markings on fluid level stem •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 0710-0042 For 87-06 Big Twin models (except 06 Dyna Glide); repl. OEM #s 37071-87, 37075-87 $39.95

OIL FILLER SPOUT COVER

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

470

•Ends the problem of the OEM dipstick breaking off and going through your gears •Larger radius on the stem to the head for more strength •Made in the U.S.A. DESCRIPTION For 87-06 Big Twin transmissions (except 06 FXD/FXDWG)

SUG. RETAIL $21.95

TRANSMISSION OIL FILL PLUG/DIPSTICK FOR 5-SPEED BIG TWIN •Show-chromed Allen-head plug includes oil level dip stick and O-ring •Made in the U.S.A.

•Adds a chrome highlight to the area around the oil filler neck •Die-cast construction •Compatible with H-D transmission interface covers PART # 0940-0592

TRANSMISSION DIPSTICK

PART # DS-194436

DESCRIPTION For 93-06 Dresser and Road King models

1107-0124 1107-0124

BRAKES

•Beautifully complements your other chrome engine and transmission pieces PART # DESCRIPTION SUG. RETAIL 1105-0018 For 98-06 FLHT, FLHR, FLTR models; 98-99 Softail; repl. $47.95 OEM #s 34468-98, 34464-98, 34541-00, or 34549-01 DS-325530 For most 87-99 Big Twin models with 5-speed transmission (will not fit Dyna Glide); repl. OEM #s 34468-86A or 34464-86A 53.95

EXHAUST FUEL/AIR SYSTEMS

CHROME TRANSMISSION TOP COVERS

SUG. RETAIL $59.95

PART # DESCRIPTION DS-193860 For all 87-06 Big Twin models (except 06 Dyna Glide); repl. OEM #s 37071-87 and 37075-87

SUG. RETAIL $14.95

1107-0125

1107-0159

TRANSMISSION SHROUD •High-quality, show-chromed, die-cast construction •Easy to install and really highlights the right side of the engine •Install in minutes •One-piece design PART # DESCRIPTION SUG. RETAIL 1107-0159 For 09-10 FLHT/FLHR/FLTR/ FLHX w/ stock head pipes $119.95 1107-0124 For 07-08 FLHT/FLHR/FLTR/ FLHX w/ true dual head pipes 169.95 1107-0133 For 07-08 FLHT/FLHR/FLTR/ FLHX w/ stock head pipes 169.95

PART # 1107-0125 DS-305019 DS-375805 1107-0132

DS-305019 DESCRIPTION For 07-10 FXST/FLST For 00-06 FXST/FLST models For 91-99 FXST/FLST models For 06-10 FXD models

SUG. RETAIL $94.95 69.95 63.95 139.95

CHROME TRANSMISSION MOUNTING PLATE SUG. PART # DESCRIPTION RETAIL DS-243621 For 86-99 5-speed Softail models; repl. OEM #47698-86B $24.95

TRANSMISSION MOUNTING PLATES •Heavy-duty construction •Easy bolt-in application •Made in the U.S.A.

1105-0015

1105-0011 1105-0013

PART # 1105-0011 1105-0012 1105-0013 1105-0014 1105-0015

SUG. DESCRIPTION RETAIL For 36-84 Paughco rigid and swingarm 4-speed frames; repl. OEM # 47968-36/47698-65 $71.95 For Paughco Easyride or stock Softail when using 4-speed transmission 87.95 For Paughco rigid frame when using Softail 5-speed transmission 62.95 87.95 For Paughco wide rigid frame when using Softail 5-speed transmission, 7/16” offset For Paughco extra wide rigid frame when using Softail 5-speed transmission, 11/2” offset 115.95

All part numbers in BOLD MAGENTA are new for 2010.


SECTION

8

WINDSHIELDS 1112-0021

1112-0022

KICKER KITS FOR 5- AND 6-SPEED TRANSMISSIONS

TOURING

•Use a ratchet hub that presses onto the shank of the mainshaft, then the O.D. of the ratchet hub presses into the oversized door bearing, keeping it secure •Kit includes heavy-duty stainless steel straight kick arm, bronze kick pedal with 5/8” spindle, preassembled polished door and cover, gaskets, fasteners and fork rod •Cable type kits come with ball ramp actuator •Hydraulic type kits come with 1.5” piston, 11/16” or HD® master cylinder required for matched compatibility; master cylinder sold separately •Compatible with Factory starter or Firestarter •Made in the U.S.A.

LUGGAGE

NOTE: Transmission case removal from bike is not required for installation.

PART # DESCRIPTION SUG. RETAIL FOR 90-98 H-D® AND BAKER 5-SPEED TRANSMISSIONS 1112-00201 W/ cable type actuator $1,495.95 1112-00211 W/ hydraulic type actuator 1,495.95 FOR 07-09 H-D® CRUISE DRIVE 6-SPEED TRANSMISSIONS 1112-0022 W/ cable type actuator 1,695.95 FOR 07-09 H-D® CRUISE DRIVE 6-SPEED TRANSMISSIONS (CONT) 1112-0023 W/ hydraulic type actuator $1,695.95

NOTE: Some exhaust systems may interfere and may require spacing

1

NOTE: 96-06 FL models will require a Baker FF oil spout; see TANKS & OIL FILTERS section.

NOTE: 07-09 applications will require ignition change and converting bike from EFI to carb.

Will fit 99-06 Twin Cam models that have been converted to pre-Twin Cam style ignitions using cam cover PART #0940-0863; cover sold separately.

DS-241027

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

1112-0029

TRANSMISSION & DRIVELINE

FOUR-SPEED KICKER COVERS •Milled, 6061 T-6 aluminum construction offers superior strength over stock •Polished to a show finish •One-piece bronze kicker shaft bushing •Features Baker’s sturdy Klassic Kicker Gears; includes mainshaft gear and ratchet hub •Includes kicker shaft, kicker gear and return spring •Leakproof fluid level plug •Concentric dowels around two of the stud positions •Hydraulic version includes 1.5” actuator piston; use of 11/16” master cylinder is recommended •Mechanical version includes release shaft, release finger and stainless steel release shaft support with O-ring; compatible with 37310-39 type (PART # DS-192500) throwout bearing •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 84-86 BIG TWIN W/ OEM TRANSMISSION AND BAKER 6-INTO-4 TRANSMISSION 1112-0028 Hydraulic $699.95 1112-0029 Mechanical 699.95

KICKSTARTER SHAFTS •PART #DS-196012 extended .0750” •Extended shaft allows more space between kicker arm and exhaust •Keeps the exhaust from getting scuffed •Made in the U.S.A.

ELECTRICAL

•Includes 16-tooth mainshaft starter gear, 24-tooth starter crank gear, flat rubber kick pedal, chrome forged kicker arm, return spring and highly chromed transmission end cover •Equal or superior to stock components •Crank gear and mainshaft gear available separately PART # DESCRIPTION FOR 84-86 BIG TWIN 4-SPEED DS-241027 Kickstarter kit; repl. OEM #33055-78A REPLACEMENT COMPONENTS DS-241028 24-tooth kickstart crank gear only; repl. OEM #33350-36 DS-241029 16-tooth kickstart mainshaft gear only; repl. OEM #33430-50 DS-325521 End cover DS-325518 Filler cap

LIGHTING HANDLEBARS, CONTROLS & MIRRORS SUG. RETAIL

CABLES

$242.95

24.95 21.95 52.95 7.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

KICKSTARTER SHAFT PART # DS-196010

DESCRIPTION For 84-86 4-speed Big Twin models; repl. OEM #33096-54B

SUG. RETAIL $21.95

MAINSHAFT STARTER GEAR BUSHING

KICK START BUSHING KIT •Made in the U.S.A. DESCRIPTION For 84-86 4-speed Big Twin; repl. OEM #33288-37

KICKSTARTER KIT

DS-196011

PART # DESCRIPTION SUG. RETAIL FOR 84-86 4-SPEED BIG TWIN MODELS DS-196011 Kick starter shaft; repl. OEM #33096-54B $67.95 DS-196012 Extended kick starter shaft; repl. OEM #33096-54B +.0750” 75.95

PART # DS-197075

GASKETS & SEALS

SUG. RETAIL $28.95

•Sold each •Made in the U.S.A. PART # DS-194120

DESCRIPTION For 84-86 Big Twin 4-speed; repl. OEM #33438-50

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $12.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

471


SECTION

8

WINDSHIELDS TOURING LUGGAGE

CHROME KICKER SPRING STUD •Chrome-plated reproduction of original kicker spring stud •Sold each •Made in the U.S.A. PART # DS-190024

DESCRIPTION For 84-86 Big Twin

KICK RETURN SPRING SUG. RETAIL $6.95

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

DESCRIPTION For 84-86 Big Twin; repl. OEM #33085-36

SUG. RETAIL $12.95

KICK ARM ASSEMBLIES •Heavy-duty 5/8” 4140 spindle in show chrome (50% larger than stock) •876 bronze investment cast pedal •304 stainless steel investment cast straight arm; provides positive kicking motion •Available in standard length or +1” length kick arm for big bore bikes •Flush mount stainless steel “head” fastener •Complete with all stainless steel hardware needed •Made in the U.S.A.

1112-0026

PART # DESCRIPTION FOR BAKER 4-SPEED, 5-SPEED, 6-SPEED, FRANKENTRANNY AND 6-INTO-4 TRANSMISSIONS WITH KICKER 1112-0024 Kick arm; std. length 1112-0025 Kick arm; +1” length 1112-0026 Kick arm and pedal assembly; std. length 1112-0027 Kick arm and pedal assembly; +1” length

KICKSTARTER RATCHET GEAR KEYS •Sold in packs of 10 •Made in the U.S.A. PART # DS-194350

DESCRIPTION For 84-86 Big Twin 4-speed models; repl. OEM #33393-50

SUG. RETAIL $1.95 (ea.)

SUG. RETAIL

$149.95 175.95 225.95 249.95

RAIL KICK PEDAL WITH SWIVEL •Rail design matches our other rail accessories •Includes the pedal bushing and spring washer

HANDLEBARS, CONTROLS STROKER KICKER ARM 1 chrome-plated arm is 10 /4” & MIRRORS •Forged, long overall, and includes pinch bolt

BRAKES

PART # DS-241005

1112-0024

LIGHTING

CABLES

•Exact replacement •High-quality construction

PART # DS-241055

NOTE: Please note location of pinch bolt; this kicker arm will only work on kickstart shafts that feature a pinch bolt groove machined completely around the shaft. PART # DS-241013

DESCRIPTION For all 84-86 four-speed models if a round or old-style kick pedal is used

DESCRIPTION For 84-86 models with early-style kicker arm

SUG. RETAIL $27.95

SUG. RETAIL $56.95

TANKS & OIL FILTERS DASHES & GAUGES

SUNDANCE® FLAT KICK PEDAL

KICK PEDAL WITH SWIVEL

•Features full swivel action •Entire length is supported by a chromed steel shaft for added strength

PART # DS-241001

•Wide pedal features a brilliantly chromed swivel

DS-240980 FRAMES, DESCRIPTION SUSPENSION PART # Flat kick pedal & FENDERS DS-240980 DS-253019 Repl. O-rings (10-pk.) FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS KICK PEDAL & TOOLS BICYCLE-STYLE •Flat reinforced pedal COVERS, •Includes swivel DESCRIPTION SECURITY PART # & GENERAL DS-241049 For 84-86 models w/ early-style kicker arm

472

SUG. RETAIL $22.95 1.95 (10-pk.)

DESCRIPTION For 84-86 models with early-style kicker arm; repl. OEM #33175-16A

SUG. RETAIL $12.95

KICK PEDAL BOLT KIT •Kit includes bolt, pedal bushing, spring washer and lock washer SUG. RETAIL $22.95

PART # DS-240985

DESCRIPTION SUG. RETAIL For all early style kicker arms for 84-86 models; repl. OEM #s 4336, 33213-31, 33215-30 and 7045 $6.95

All part numbers in BOLD MAGENTA are new for 2010.


SECTION

WINDSHIELDS

FUNCTION-FORMED™ PRIMARY (FFP) •Deck out your Softail with the first aftermarket wet primary drive system •Features a strong billet 6061 T-6 aluminum construction in black or polished finishes •Sleek design features a hole giving the primary a unique belt drive look, yet retaining all of the advantages of a wet primary •Each primary kit includes an inner primary housing, outer primary cover, special starter jackshaft, chain adjustment shoe and mechanism, gaskets, and stainless steel fasteners •Available for use with stock clutch or Baker’s new King Kong Klutch™, with twenty massive automotive clutch plates ready to take on a larger motor; see page 494 •FFP with King Kong Klutch includes internal outside bearing support and a special pinion gear •Made in the U.S.A. FUNCTION-FORMED™ PRIMARY W/ KING KONG KLUTCH PART # DESCRIPTION FOR 90-06 BIG TWIN MODELS 1120-0204 36-tooth clutch 1120-0205 37-tooth clutch 1120-0206 36-tooth clutch 1120-0207 37-tooth clutch

sprocket, sprocket, sprocket, sprocket,

black black polished polished

TOURING LUGGAGE 1120-0200

SEATS & SISSY BARS

FUNCTION-FORMED™ PRIMARY FOR USE WITH STOCK CLUTCHES SUG. RETAIL $3,929.95 3,929.95 3,775.95 3,775.95

8

PART # DESCRIPTION FOR 90-93 BIG TWIN MODELS 1120-0200 Polished 1120-0201 Black FOR 94-06 BIG TWIN MODELS 1120-0202 Polished 1120-0203 Black

SUG. RETAIL $2,020.95 2,174.95

EXHAUST

2,020.95 2,174.95

FUEL/AIR SYSTEMS

DS-375666

ENGINE TRANSMISSION & DRIVELINE

PRIMARY COVERS •Die-cast construction with either a chrome or polished finish •Sight glass in cover allows you to check primary oil level at a glance •Made in the U.S.A. PART # DESCRIPTION CHROME DS-375666 For 94-06 FXST, FLST and 94-05 Dyna Glide DS-375664 For 89-93 FXST, FLST and 91-93 Dyna Glide

1120-0215

GASKETS & SEALS SUG. RETAIL $864.95 864.95

PART # POLISHED DS-375690 DS-375689

DESCRIPTION

SUG. RETAIL

For 94-06 FXST, FLST and 94-05 Dyna Glide For 89-93 FXST, FLST and 91-93 Dyna Glide

1107-0058

1120-0216

$664.95 664.95

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BILLET PRIMARY COVERS

BRAKES

•Designed for use with the Scorpion lock-up clutch assembly or the OEM style clutch assembly •Derby cover is repositioned and oversized to make clutch plate removal/ installation and lock-up tuning easy by simply removing the derby cover •CNC-machined from 6061 T-6 billet aluminum and chrome-plated for a show-quality appearance •Made in the U.S.A. PART # 1120-0215 1107-0058 1120-0216 1107-0059 1107-0060

DESCRIPTION SUG. RETAIL For 07-10 Softail models $1,194.95 For 89-06 Softail models and 91-05 Dyna Glide models w/ forward controls 1,194.95 For 07-10 Dresser models 1,194.95 For 94-06 FLT models 1,194.95 1,194.95 For 90-93 FXR and FLT models

TANKS & OIL FILTERS DASHES & GAUGES 1107-0060

1107-0044

CHROME ALUMINUM OUTER PRIMARY COVERS •Die-cast outer primary covers available in a chrome finish •Standard eight-hole application, but location is marked for drilling ninth hole to allow nine-hole installation (PART #DS-375623) •Hardware and bushing not included

DS-375623

NOTE: Starter shaft bearing must be purchased separately. PART # 1107-0044 DS-375623

DESCRIPTION For 99-06 FLHT/FLHR/FLTR; repl. OEM #60665-99 For 84-85 FXST

SUG. RETAIL $249.95 199.95

All part numbers in BOLD MAGENTA are new for 2010.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

473


SECTION

8

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS

CHROME VENTED PRIMARY COVER •For use with belt drive systems that fit in stock primary covers •Custom look for your bike •Increased airflow keeps the clutch and belt cool for longer life NOTE: Inspection cover and derby cover are not included. PART # 1107-0041

EXHAUST FUEL/AIR SYSTEMS

DESCRIPTION For 94-06 FXST, FLST (use three-hole derby cover)

SUG. RETAIL $259.95

CHROME PRIMARY COVER •Die-cast aluminum primary cover •Polished with a deep chrome finish •Chrome inspection cover and derby cover are available separately

PART # 1107-0105

1107-0037

DESCRIPTION For 04-05 XL

SUG. RETAIL $229.95

1107-0036

1107-0035

ENGINE TRANSMISSION CHROME OUTER PRIMARY COVERS & DRIVELINE •Rugged, die-cast aluminum construction with a chrome-plated finish •Starter shaft bushings included; seals and other components must be ordered separately to complete installation

GASKETS & SEALS

PART # 1107-0037 1107-0035

DESCRIPTION For 89-93 Softail and 91-93 Dyna For 95-98 Softail and Dyna

CHROME

ELECTRICAL INNER PRIMARIES LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

SUG. RETAIL $229.95 229.95

DESCRIPTION For 99-06 Softail and 99-05 Dyna Repl. starter shaft bushing (ea.) (94-06 only)

SUG. RETAIL $229.95 10.95

1107-0045

1” OFFSET INNER PRIMARY

•Rugged, die-cast aluminum construction with a chrome-plated finish •Starter shaft bushing included; seals and other components must be ordered separately to complete installation •Accept all OEM components PART # 1107-0038 1107-0045 1107-0040

PART # 1107-0036 1107-0039

DESCRIPTION For 89-93 Softail For 94-06 Softail Repl. starter shaft bushing (ea.) (94-06 only)

ALUMINUM INNER PRIMARIES

SUG. RETAIL $329.95 329.95 8.95

•Chrome-plated finish with reinforcing webs for added strength •Offset for fat tire and wide frame applications •Uses 94-06 primary components; sold separately PART # DS-375698

DESCRIPTION For 94-06 FXST, FLST

SUG. RETAIL $399.95

DS-375640

•Primaries are cast from 356 T-67 aluminum in a permanent mold and machined to exact tolerances •Material has been added in critical areas for superior strength •Includes transmission shaft bearing, retainer rings, transmission shaft oil seal, primary chain tensioner mounting plate, starter bushing and oil seal already installed PART # •Accepts all OEM components DS-375640 •Comes in a raw finish that can be painted, powder-coated or chromed DS-375639 DS-375645 •Made in the U.S.A.

DS-375645

DESCRIPTION For 94-06 FXST/FLST models; repl. OEM #60630-94A For 90-93 FXST/FLST models; repl. OEM #60630-90 For 89-93 FXR models; repl. OEM #60612-90

SUG. RETAIL $195.95 195.95 306.95

FRAMES, SUSPENSION & FENDERS INNER FOOTRESTS 2214-5004 PRIMARY SPACERS & LICENSE INNER •Precision-machined PLATE FRAMES PRIMARY polished billet aluminum SPACERS •Fit between the inner TIRES, •Fit between the inner primary or front motor plate section and primary and motor TUBES & the engine to create a smooth, virtually •Used with fat tire/wide frame applications WHEELS •Polished finish uninterrupted mating of both pieces 1120-0125 •Made in the U.S.A. •Made in the U.S.A. SUG. SUG. HARDWARE, DESCRIPTION RETAIL PART # DESCRIPTION RETAIL SUG. SUG. PART # CHEMICALS FOR 84-06 PRIMARYS (CONT) DESCRIPTION RETAIL PART # DESCRIPTION RETAIL FOR 84-06 PRIMARYS & TOOLS PART # $64.95 1120-0132 17/16” spacer $103.95 1120-0130 1/2” spacer FOR MOST 84-06 PRIMARYS FOR MOST 84-06 PRIMARYS (CONT) 3 /4” spacer 120.95 1120-0126 11/2” spacer 105.95 $55.95 1120-0129 $31.95 2214-5004 1” spacer COVERS, 2214-5001 1/4” spacer 77.95 1120-0125 2” spacer 119.95 36.95 2214-5005 11/4” spacer 71.95 1120-0128 1” spacer SECURITY 2214-5002 13/2” spacer 85.95 44.95 2214-5006 11/2” spacer 89.95 1120-0127 11/4” spacer & GENERAL 2214-5003 /4” spacer

474

All part numbers in BOLD MAGENTA are new for 2010.


SECTION INNER PRIMARY COVER EXTENSION

WINDSHIELDS

•A must when using Küryakyn’s standard inner primary cover DS-375804 and running a two-into-one performance exhaust •Covers the exposed section of the primary when the stock exhaust is not used •Easy upgrade; must be used with Küryakyn Inner Primary Cover PART # 1120-0066

DESCRIPTION For 90-06 FLT models using Küryakyn inner primary cover and 2-into-1 exhaust

TOURING

INNER PRIMARY FRONT COVER EXTENSION

SUG. RETAIL $49.95

•Puts the finishing touch on your primary •Covers the shift pivot area and grease fitting •Easily installed PART # DESCRIPTION 0950-0198 For 90-06 FLT, FLHT, FLHR, FLHS models

LUGGAGE SUG. RETAIL $39.95

DS-375804 DS-375804

SEATS & SISSY BARS EXHAUST

DELUXE CHROME INNER PRIMARY COVER ACCENTS

FUEL/AIR SYSTEMS

•High-quality, chrome-plated, die-cast •Precise fit and finished edges enhance the primary area •Four mounting points for secure, quiet operation

ENGINE

NOTE: Not for use with rear suspension lowering kits unless specified. PART # 1120-0188 DS-305023 DS-375801

8

DS-375801

DESCRIPTION SUG. RETAIL For 07-10 FXST/FLST (except FLSTSC) $139.95 For 00-06 Softail models (works w/ lowering kits) 114.95 For 89-99 Softail models (except FLSTS) 104.95

PART # DS-375802 DS-375803 DS-375804

DESCRIPTION For 91-05 Dyna models w/ standard controls For 91-02 Dyna models w/ forward controls For 90-06 FLT, FLHT, FLHR, FLTR models (grooved)

1913-3010

SUG. RETAIL $114.95 114.95 114.95

1132-0395

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1132-0396

1913-3009 1913-3011

LIGHTING

INNER PRIMARY LOCK-TABS

INNER PRIMARY MOUNTING KITS

•Lock-tabs designed for use on inner primary bolts •Made in the U.S.A.

•Kits include all required hardware needed to install an inner primary •Made in the U.S.A.

1913-3012

SUG. PART # DESCRIPTION RETAIL 1913-3009 For 84-85 Big Twin (4-speed) $23.95 1913-3010 For 86-00 FLT 16.95

PART # DESCRIPTION 1913-3011 For 86-93 FXST/FLST 1913-3012 For 94-99 FXST/FLST

SUG. RETAIL $16.95 16.95

SUG. PART # DESCRIPTION RETAIL 1132-0396 For 87-06 Big Twin; repl. OEM #33318-85 (10-pk.) $1.95 (ea.) 1132-0395 For 84-86 Big Twin; repl. OEM #7402 (10-pk.) 7.95 (10-pk.)

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS

DS-194397

DS-194396

INNER PRIMARY LOCK-TABS •Lock-tabs secure inner primary bolts •Made in the U.S.A. PART # DS-194397 DS-194396

DESCRIPTION For 87-06 Big Twin; repl. OEM #33318-85 (10-pk.) For 84-86 Big Twin; repl. OEM #7402 (10-pk.)

SUG. RETAIL $1.95 (ea.) 1.95 (ea.)

1110-0018

•Replaces the two-piece bearing and seal in the inner primary •A must for large horsepower motors that have the problem of the race moving in or out •Great for belt drive primary conversions •Replacement seal available separately •Made in the U.S.A. SUG. PART # DESCRIPTION RETAIL 1110-0018 For 85-06 Big Twin (except 06 FXD, FXDWG); repl. OEM #34091-85 inner race, 9135 bearing and 12052 seal $40.95 1104-0003 Repl. seal 8.95

INNER PRIMARY MAINSHAFT BEARING RACE

INNER PRIMARY MAINSHAFT BEARING/SEAL KIT

•S&S inner primary bearing race positively eliminates bearing race movement that can cause costly damage to transmission seal and output bearing •A must for high-performance applications •Made in the U.S.A.

•Includes all necessary parts for complete inner primary bearing and seal replacement •Fits OEM and most aftermarket inner primaries PART # 1120-0162

HIGH TORQUE BEARING/SEAL KIT

DESCRIPTION For 89-06 Big Twin (except 06 Dyna Glide)

SUG. RETAIL $37.95

PART # 1120-0148

DESCRIPTION For all 91-06 Big Twin (except 06 Dyna)

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $73.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

475


SECTION

8

WINDSHIELDS INNER PRIMARY MAINSHAFT BEARING/SEAL KIT

TOURING LUGGAGE

•Kit includes sealed ball bearing, seal and snap ring for complete replacement of OEM parts •Fits OEM and aftermarket primaries PART # DESCRIPTION 1120-0217 For 91-06 Big Twin (except 06 Dyna Glide)

FUEL/AIR SYSTEMS

•High-quality roller bearing comes with two retainer rings •Fits OEM and most aftermarket aluminum inner primaries SUG. RETAIL $19.95

PART # 1132-0005

DESCRIPTION For 85-06 Big Twin models (except 06 Dyna Glide); repl. OEM #s 9135/60678-85

PRIMARY BUSHINGS

INNER

SEATS & PRIMARY COVER SISSY BARS MAINSHAFT BEARING EXHAUST

INNER PRIMARY MAINSHAFT BEARING

•Sealed ball bearing fits into aluminum inner primary covers to support transmission mainshaft •Sold individually PART # DESCRIPTION 1120-0177 For 65-86 Big Twin; repl. OEM #s 9061 and 9040

SUG. RETAIL $9.95

SUG. RETAIL $45.95

2110-0038

2110-0036

•Quality replacement steel bushings 2110-0035 •Sold each 2110-0037 PART # DESCRIPTION INNER PRIMARY STARTER SHAFT BUSHING 2110-0035 For 94-06 Big Twin (except 06 Dyna Glide); repl. OEM #33445-94A 2110-0036 For 89-93 Big Twin; repl. OEM #33445-89 OUTER PRIMARY STARTER SHAFT BUSHING 2110-0037 For 94-06 Big Twin (except 06 Dyna Glide); repl. OEM #33446-94A 2110-0038 For 89-93 Big Twin; repl. OEM #33446-89

SUG. RETAIL $8.95 8.95 4.95 4.95

ENGINE TRANSMISSION & DRIVELINE SEALED PRIMARY BEARING GASKETS & SEALS ELECTRICAL

•Used when converting primary to a belt drive and dry clutch •Replaces OEM two-piece bearing •Does not require lubrication •Bearing fits inner primary and mainshaft without any honing •Sold each •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL DS-196016 For 87-06 Big Twin (except 06 Dyna Glide); repl. OEM #9135 $21.95

PRIMARY COVER SOCKETHEAD PLUGS •Chrome socket-head plugs replace stock slotted plugs •Sets include both plugs and 1/2” socket-head wrench •Made in the U.S.A. PART # DS-190776

DESCRIPTION For 86-90 XL

SUG. RETAIL $71.95

LIGHTING DERBY COVERS •Chrome billet aluminum covers with a smooth or ball-milled design •Sold each •Made in the U.S.A.

HANDLEBARS, CONTROLS & MIRRORS

NOTE: 06 Dyna Glide and all 07-10 applications will require the use of gasket 0934-0289 or 0934-0788.

CABLES DS-375747 DS-375744

PART # DESCRIPTION FOR 99-10 BIG TWIN DS-375746 Millennium smooth DS-375747 Millenium ball-milled

SUG. RETAIL $99.95 99.95

BRAKES

PART # DESCRIPTION SUG. RETAIL FOR 84-98 BIG TWIN DS-375744 Millennium smooth $88.95 DS-375745 Millennium ball-milled 88.95

1107-0151

TANKS & OIL FILTERS DASHES & GAUGES 0940-0291 1107-0146 1107-0145 1107-0149 FRAMES, SUSPENSION DERBY COVERS & FENDERS •Constructed from a solid piece of 6061 billet aluminum or black wrinkle finish FOOTRESTS •Chrome-plated •Matching points cover, inspection cover and gas cap also available & LICENSE •Made in the U.S.A. PLATE FRAMES NOTE: 06 Dyna Glide and all 07-10 Big Twin applications will require the TIRES, use of gasket PART #s 0934-0289 or 0934-0788. SUG. SUG. TUBES & PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL WHEELS FOR 99-10 BIG TWIN FOR 84-98 BIG TWIN 0940-0291 Crusade Maltese HARDWARE, 0940-0290 Crusade Maltese Cross, chrome $128.95 Cross, chrome $136.95 CHEMICALS 1107-0001 Reflections, chrome 115.95 1107-0002 Reflections, chrome 115.95 & TOOLS 1107-0147 Stepped, chrome 116.95 1107-0145 Stepped, chrome 116.95 116.95 1107-0146 Stepped, black wrinkle 116.95 COVERS, 1107-0148 Stepped, black wrinkle 128.95 1107-0149 American Diva, chrome 128.95 SECURITY 1107-0150 American Diva, chrome 128.95 1107-0151 Skull, chrome 128.95 & GENERAL 1107-0152 Skull, chrome

476

1107-0126

1107-0128

PART # DESCRIPTION FOR XL 04-10 1107-0127 Crusade Maltese Cross, chrome 1107-0126 Road Warrior, chrome 1107-0128 Ball-milled, chrome

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL

$176.95 176.95 176.95


SECTION DERBY COVER

TOURING

NOTE: 06 Dyna Glide and all 07-10 applications will require the use of gasket 0934-0289 or 0934-0788. PART #

DESCRIPTION

1107-0173

For 99-10 Big Twin

SUG. RETAIL $119.95

DERBY COVERS •CNC-machined from billet aluminum •Includes mounting hardware

1107-0121

1107-0122

NOTE: 06 Dyna Glide and all 07-10 applications will require the use of gasket PART #s 0934-0289 or 0934-0788. SUG. RETAIL

PART # DESCRIPTION FOR 99-10 BIG TWIN 1107-0122 Black 1107-0123 Chrome 1107-0154 Black w/ diamond-edge

WINDSHIELDS

1107-0118

•Machined from 6061 billet aluminum, highly polished and show-chromed •Features Klock Werks logo •Sold each •Made in the U.S.A.

8

$149.95 149.95 213.95

PART # DESCRIPTION FOR 84-98 BIG TWIN 1107-0120 Black 1107-0121 Chrome 1107-0153 Black w/ diamond-edge

SUG. RETAIL

NOSTALGIA DERBY COVERS

LUGGAGE

•A Roland Sands Design inspired by his Discovery Channel Biker Build-Off project The Glory Stomper •Machined from aluminum to exacting standards 1107-0135 •Choice of chrome plated or black anodized finish •Include all mounting hardware •Matching rocker box covers, timing cover, points cover and inspection cover are available separately •Made in the U.S.A. NOTE: 06 Dyna Glide and all 07-10 applications will require the use of gasket PART #S 0934-0289 or 0934-0788. PART # DESCRIPTION FOR 99-10 BIG TWIN MODELS 1107-0118 Chrome 1107-0135 Black anodized

SUG. RETAIL $149.95 149.95

PART # DESCRIPTION FOR 84-98 BIG TWIN MODELS 1107-0117 Chrome 1107-0134 Black anodized

SUG. RETAIL $149.95 149.95

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

$149.95 149.95

0940-0780

213.95

0940-0924

TRANSMISSION & DRIVELINE GASKETS & SEALS

DERBY COVERS

ELECTRICAL 1107-0047

DERBY COVERS

1107-0006

NOTE: 06 Dyna Glide and all 07-09 Big Twin applications will require the use of gasket PART # 0934-0289 or 0934-0788. PART #

DESCRIPTION

1107-0047 DS-375650 1107-0006 DS-375647

For For For For

99-10 84-98 04-10 94-03

SUG. RETAIL

Big Twin; repl. OEM #25416-99A Big Twin; repl. OEM #25414-70 XL; repl. OEM #34760-04 XL; repl. OEM #34742-94A

$24.95 21.95 34.95 30.95

NESS-TECH® DERBY COVERS •Machined from 6061 T-6 billet aluminum, polished and show-chromed •Chrome hardware included •Sold each

DS-373952

1107-0160

NOTE: 06 Dyna Glide and all 07-10 applications will require the use of gasket 0934-0289 or 0934-0788. PART # DESCRIPTION SUG. RETAIL FOR 99-10 BIG TWIN MODELS 1107-0160 Retro $119.95

PART # DESCRIPTION SUG. RETAIL FOR 84-98 BIG TWIN MODELS DS-373952 Grooved $79.95

DS-375093

FOR 99-10 BIG TWIN PART # MALTESE CROSS 0940-0311 0940-0312 0940-0779 NAUTICAL STAR 0940-0924 FOR 84-98 BIG TWIN PART # MALTESE CROSS 0940-0309 0940-0310 0940-0780 NAUTICAL STAR 0940-0925

DESCRIPTION Chrome Black powder-coat/chrome cross Black powder-coat/gold cross Black powder-coat

Engine turned design Finned design

$179.95 179.95 179.95

119.95 98.95

CABLES BRAKES

DESCRIPTION Chrome Black powder-coat/chrome cross Black powder-coat/gold cross Black powder-coat

SUG. RETAIL $179.95 179.95 179.95

TANKS & OIL FILTERS

179.95

DASHES & GAUGES

1107-0034

•Chrome die-cast construction •Features blackened eyes and mouth •Skull protrudes outward about .750”

$126.95

HANDLEBARS, CONTROLS & MIRRORS

179.95

3-D SKULL DERBY COVERS

SUG. RETAIL

Engine turned design

SUG. RETAIL

1902-0062

DS-375090

DESCRIPTION

LIGHTING

NOTE: 06 Dyna Glide and all 07-10 applications will require the use of gasket PART #s 0934-0289 or 0934-0788.

1902-0061

NOTE: 06 Dyna Glide and all 07-10 applications will require the use of gasket 0934-0289 or 0934-0788. PART # FOR 99-10 BIG TWIN DS-375093 FOR 84-98 BIG TWIN DS-375090 DS-375620

•Billet aluminum derby covers with a raised Maltese Cross or Nautical Star design •Made in the U.S.A.

DS-375620

BILLET DERBY COVERS •Chrome-plated finish •Include mounting hardware •Made in the U.S.A.

0940-0309

0940-0312

•Chrome die-cast construction •Domed smooth design •Include mounting hardware

NOTE: 06 Dyna Glide and all 07-10 Big Twin applications will require the use of gasket PART # 0934-0289 or 0934-0788. PART #

DESCRIPTION

1902-0061 1902-0062 1107-0034

For 99-10 Big Twin For 84-98 Big Twin For 94-03 XL

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $45.95 45.95 42.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

477


SECTION

8

WINDSHIELDS DERBY COVERS

TOURING

•Choice of chrome-plated or black anodized aluminum •Includes mounting hardware •Made in the U.S.A.

LUGGAGE

NOTE: 06 Dyna Glide applications and all 07-10 applications will require 1107-0182 the use of gasket PART #0934-0289 or PART #0934-0788. PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION FOR 99-10 BIG TWIN FOR 99-10 BIG TWIN (CONT) 0940-0771 Chrome $159.95 1107-0182 Chrome Tri-Bar 0940-0772 Black 159.95 1107-0183 Black Tri-Bar

SEATS & SISSY BARS SUPREME DERBY COVERS EXHAUST FUEL/AIR SYSTEMS ENGINE

0940-0771

1107-0183 SUG. RETAIL $159.95 159.95

PART # FOR 84-98 BIG 0940-0769 0940-0770

•Feature all CNC machining from billet bar (not cast) •Fully polished then chrome-plated to a high luster •Logos catch the light due to perfect 3D CNC engraving along the curve of the dome for the ultimate in cool •Mounting hardware included •Made in the U.S.A.

0940-0772

DESCRIPTION TWIN Chrome Black

$159.95 159.95

DS-375007 0940-0276

NOTE: 06 Dyna Glide applications and all 07-10 applications will require the use of gasket PART #0934-0289 or PART #0934-0788. PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION FOR 99-10 BIG TWIN FOR 84-98 BIG TWIN DS-375007 Joker $94.95 0940-0276 Hot Head DS-375006 Hot Head 94.95 0940-0277 Joker

DS-375260

DS-375058

SUG. RETAIL

SUG. RETAIL $79.95 79.95

1107-0170

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

1107-0115 1107-0114

BILLET DERBY COVERS •Available in a variety of designs •Includes mounting hardware •Made in the U.S.A.

DS-375057

DS-375060

1107-0168

NOTE: 06 Dyna Glide applications and all 07-10 applications will require the use of gasket PART #s 0934-0289 or 0934-0788. PART # DESCRIPTION FOR 99-10 BIG TWIN 1107-0113 Finned, chrome 1107-0114 Money to Burn 1107-0115 Rock and Roll DS-375057 Flame DS-375058 Hot Head DS-375060 Smooth DS-375260 Lucky 7

SUG. RETAIL $94.95 94.95 94.95 95.95 95.95 95.95 95.95

PART # DESCRIPTION SUG. RETAIL FOR 84-98 BIG TWIN 1107-0110 Finned, chrome $79.95 1107-0111 Money to Burn, hrome 79.95 1107-0112 Rock and Roll, chrome 79.95 DS-375061 Flame, chrome 81.95 DS-375062 Hot Head, chrome 81.95 DS-375064 Smooth, chrome 81.95 DS-375259 Lucky 7, chrome 81.95

1107-0172

PART # DESCRIPTION SUG. RETAIL FOR 04-10 XL MODELS 1107-0167 Finned, black anodized $99.95 1107-0168 Finned, chrome 99.95 1107-0169 Finned, clear anodized 99.95 1107-0170 Techno, black anodized 99.95 1107-0171 Techno, chrome 99.95 1107-0172 Techno, clear anodized 99.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

SLOTTED DERBY COVERS •Chrome-plated T-6 billet aluminum •Slotted versions feature .145” slots to allow cool air to reach belt-drive primary system 1902-4236 •Made in the U.S.A. PART # DESCRIPTION FOR 84-98 BIG TWIN 1902-4236 Vented, slotted 1902-1607 Vented, stepped and slotted

1902-1607

FRAMES, SUSPENSION & FENDERS 1107-0158 FOOTRESTS & LICENSE PLATE FRAMES LIVE TO RIDE DERBY COVERS TIRES, •Feature a detailed chrome- or gold-plated eagle and banner TUBES & •Script is recessed WHEELS NOTE: 06 Dyna Glide and all 07-10 applications HARDWARE, will require the use of gasket PART #0934-0289 1107-0155 CHEMICALS or 0934-0788. SUG. & TOOLS PART # DESCRIPTION RETAIL PART # DESCRIPTION FOR 84-98 BIG TWIN COVERS, FOR 99-10 BIG TWIN $37.95 1107-0155 Chrome SECURITY 1107-0157 Chrome 46.95 1107-0156 Gold & GENERAL 1107-0158 Gold

478

SUG. RETAIL

DS-375080 DS-375079

$92.95 96.95

1107-0053

DERBY COVERS •Choice of chrome-plated or black-anodized CNC-machined 6061 T-6 billet aluminum •Mounting hardware included •Made in the U.S.A. NOTE: All 06 Dyna Glide and all 07-10 applications will require the use of gasket PART # 0934-0289 or 0934-0788. SUG. RETAIL $29.95 42.95

PART # DESCRIPTION FOR 99-10 BIG TWIN DS-375079 Elite; chrome 1107-0053 Maltese Cross; black-anodized FOR 70-98 BIG TWIN DS-375080 Elite; chrome

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $92.95 96.95 92.95


SECTION 1107-0164

1107-0166

DERBY COVERS •High-quality covers that scream “custom” •Constructed of 6061 T6 aluminum •Available in two distinct styles with chrome or black-anodized finish •Easy installation •Made in the U.S.A.

8

WINDSHIELDS TOURING

1107-0165

1107-0163

NOTE: 06 Dyna Glide and all 07-10 applications will require the use of gasket 0934-0289 or 0934-0788. PART # DESCRIPTION FOR 99-10 BIG TWIN (5-HOLE) 1107-0163 Lefty series, black 1107-0164 Lefty series, chrome

SUG. RETAIL

0940-0707

0940-0717

$134.95 134.95

0940-0708

PART # DESCRIPTION FOR 99-10 BIG TWIN (5-HOLE) (CONT) 1107-0165 Waterfall series, black 1107-0166 Waterfall series, chrome

SUG. RETAIL $144.95 144.95

LUGGAGE SEATS & SISSY BARS EXHAUST

0940-0718 1107-0141

FUEL/AIR SYSTEMS 1107-0142

PRIMARY COVER INSERTS

0940-0711

0940-0712

•Constructed from a solid piece of 6061 billet aluminum •Attach to the recessed area on the outer primary with included adhesive •Chrome-plated or black wrinkle finish •Made in the U.S.A. PART # 07-10 FXST/FLST, 0940-0707 0940-0715 0940-0708 0940-0716 0940-0709 0940-0717 0940-0710 0940-0718 1107-0141

DESCRIPTION 06-10 FXDWG/FXDF Warrior, chrome Warrior, black wrinkle Crusader Maltese Cross, chrome Crusader Maltese Cross, black wrinkle Ball milled, chrome Ball milled, black wrinkle Smooth, chrome Smooth, black wrinkle Stepped, chrome

SUG. RETAIL $58.95 55.95 64.95 62.95 56.95 53.95 52.95 49.95 57.95

ENGINE

0940-0714 0940-0713

1107-0144 1107-0143

PART # DESCRIPTION 07-10 FXST/FLST, 06-10 FXDWG/FXDF (CONT) 1107-0142 Stepped, black wrinkle FOR 07-10 FLT/FLHT/FLHR/FLTR 0940-0711 Warrior, chrome 0940-0712 Crusader Maltese Cross, chrome 0940-0713 Ball milled, chrome 0940-0714 Smooth, chrome 1107-0143 Stepped, chrome 1107-0144 Stepped, black wrinkle

SUG. RETAIL $57.95 58.95 64.95 56.95 52.95 57.95 57.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING

CRUSADER MALTESE CROSS PRIMARY COVER EMBLEM •Quality chrome-plated billet aluminum construction •Attaches to the front raised area on the outer primary cover •Attaches with special heat-resistant double-sided tape •Matching points cover, derby cover, gas cap, transmission cover, inspection cover, mini horn cover and triple tree covers also available PART # DESCRIPTION •23/4” diameter 0940-0611 For 84-09 FX/FL/FXST/FLST and 93-08 FXDWG •Made in the U.S.A.

HANDLEBARS, CONTROLS & MIRRORS SUG. RETAIL $27.95

CABLES BRAKES

DS-375001

DS-375634C

TANKS & OIL FILTERS

1107-0017

CHROME BILLET INSPECTION COVERS ELITE PRIMARY INSPECTION COVER

•Chrome finish covers in ball-end milled or smooth design •Includes chrome hardware •Sold each •Made in the U.S.A. PART # DESCRIPTION FOR 84-06 FX/FL, FXST/FLST, FXWG, 93-05 FXDWG DS-375001 Smooth DS-375634C Ball-milled FOR 85-06 FLT 1107-0017 Ball-milled

SUG. RETAIL $55.95 55.95 66.95

•Chrome-plated CNC-machined 6061 T-6 billet aluminum •Mounting hardware included •Elite style •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL DS-375196 For 84-06 FX/FL, FXST/FLST, FXWG, 93-05 FXDWG $60.95

1902-1601

SLOTTED INSPECTION COVERS •Chrome-plated T-6 billet alluminum •.145” slots allow cool air to reach your belt-drive primary system •Available in slotted or stepped-and-slotted designs •Mounting hardware included •Made in the U.S.A. PART # DESCRIPTION FOR 84-06 FX/FL, FXST/FLST, FXWG, 93-05 FXDWG 1902-1600 Slotted 1902-1601 Stepped and slotted

1902-1600

SUG. RETAIL $60.95 60.95

1902-1603

PART # DESCRIPTION FOR 85-06 FLT/FLHT/FXR (WITH FORWARD CONTROLS) 1902-1603 Stepped and slotted

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $60.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

479


SECTION

8

WINDSHIELDS

NOSTALGIA INSPECTION COVERS

1107-0119

•A Roland Sands Design inspired by his Discovery Channel Biker Build-Off project The Glory Stomper •Machined from aluminum to exacting standards •Choice of chrome plated or black anodized finish •Include all mounting hardware PART # DESCRIPTION •Matching rocker box covers, FOR 84-06 FXST/FLST, FXWG, derby cover, timing cover 93-05 FXDWG MODELS and points covers 1107-0119 Chrome are available separately 1107-0136 Black anodized •Made in the U.S.A.

TOURING 1107-0136

LUGGAGE SEATS & SISSY BARS

SUG. RETAIL

$99.95 99.95

DS-375261

DS-375066

EXHAUST

DS-375069 DS-375072

1107-0108

FUEL/AIR SYSTEMS DS-375071

CHROME BILLET INSPECTION COVERS

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

•Available in a variety of designs •Include mounting hardware •Made in the U.S.A. PART # DESCRIPTION FOR 84-06 FXST/FLST, FXWG AND 93-05 FXDWG 1107-0108 Finned DS-375065 Flame DS-375066 Hot Head DS-375067 Joker

SUG. RETAIL

$48.95 47.95 47.95 47.95

PART # DESCRIPTION FOR 84-06 FXST/FLST, FXWG AND 93-05 FXDWG (CONT) DS-375068 Smooth DS-375261 Lucky 7 FOR 85-06 FLT/FLHT/FLHR/FLTR 0940-0009 Lucky 7

SUG. RETAIL

$47.95 47.95 52.95

PART # DESCRIPTION SUG. RETAIL FOR 85-06 FLT/FLHT/FLHR/FLTR (CONT) 1107-0109 Finned $52.95 DS-375069 Flame 52.95 DS-375070 Hot Head 52.95 DS-375071 Joker 52.95 DS-375072 Smooth 52.95

1107-0106

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

DS-375616 DS-375091

CHROME INSPECTION COVER

INSPECTION COVERS •Chrome billet aluminum; mounting hardware included •Made in the U.S.A. PART # DESCRIPTION FOR 84-06 FXST/FLST, FXWG, 93-05 FXDWG DS-375091 Engine turned design DS-375616 Finned design

SUG. RETAIL $87.95 63.95

•Machined from billet aluminum; includes gasket and hardware 0934-1711 •Polished with a deep chrome finish •Chrome primary cover and derby cover are available separately PART # 1107-0106 0934-1711

DESCRIPTION For 84-10 XL Repl. gasket

SUG. RETAIL $23.95 4.95

TANKS & OIL FILTERS DASHES & GAUGES

EAGLE SPIRIT INSPECTION COVERS •Chrome-plated eagle and the “Eagle Spirit” PART # script recessed DS-325291 into cover surface •Sold each

PRIMARY CHAIN INSPECTION COVER •Chrome plated

DESCRIPTION SUG. RETAIL •Sold each FRAMES, For 84-06 FXST/FLST SUSPENSION DESCRIPTION and 93-05 FXDWG $21.95 PART # & FENDERS DS-325293 For 84-06 FXST, FXWG, 93-05 FXDWG; repl. OEM #60572-78 FOOTRESTS INSPECTION COVERS 1107-0138 & LICENSE from PLATE FRAMES •Constructed a solid piece of 6061 billet aluminum TIRES, •Chrome-plated or TUBES & black wrinkle finish 0940-0294 WHEELS •Matching points cover, derby cover and gas cap also available 1107-0137 HARDWARE, •Made in the U.S.A. CHEMICALS PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION SUG. RETAIL & TOOLS FOR 84-06 FXST/FLST, FXWG AND 93-05 FXDWG FOR 85-06 FLT/FLHT/FLHR/FLTR 0940-0294 Crusader Maltese Cross, chrome $58.95 1107-0139 Stepped, chrome $57.95 COVERS, 1107-0137 Stepped, chrome 54.95 1107-0140 Stepped, black wrinkle 57.95 SECURITY 1107-0138 Stepped, black wrinkle 54.95 & GENERAL

480

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $9.95

1107-0139

1107-0140


SECTION

8

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS 1120-0233/1120-0231

1120-0234/1120-0232

2” BELT DRIVE KITS

EXHAUST

•Includes BDL’s ball-bearing lockup clutch, new full-coverage side guard and top mesh belt guard •Kit also includes motor plate, 52-tooth front pulley, 69-tooth rear pulley and 142-tooth belt •2” drive width allows for the use of stock floorboards •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION FOR 07-10 FLHT/FLHR/FLTR/FLHX FOR 90-06 FLHT/FLHR/FLTR/FLHX 1120-0233 Polished $1,949.95 1120-0231 Polished 1120-0234 Black 2,084.95 1120-0232 Black 1120-0238 Clear anodized 2,084.95

SUG. RETAIL $1,955.95 2,084.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

2” OPEN BELT DRIVE KIT •Ball-bearing lockup clutch provides approximately 60% more surface contact area than the stock clutch for smooth, sure power transfer •Kits include motor plate, starter standoff, ring gear guard, pinion gear kit, 52T front pulley, rear pulley with 69-tooth 2” clutch basket, SG-3 ring gear, hub bearing, hub nut, lockup clutch and Kevlar® 142T drive belt •Also includes BPP-100 pressure plate kit and standard clutch pack •Made in the U.S.A. PART # 1120-0211

DESCRIPTION 90-06 FXST, FLST

ELECTRICAL

SUG. RETAIL $1,489.95

LIGHTING

1120-0211

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS 1120-0229

1120-0230

DASHES & GAUGES

1120-0237

1120-0236

2” OPEN BELT DRIVE •BDL’s ball-bearing lockup clutch provides ease of shifting and positive clutch engagement •New streamlined baseplate provides a unique look •Kit also includes 52T front pulley, 69T rear pulley, Kevlar® 142-tooth drive belt, motor plate, starter housing and guard, stand offs, side guard and rear pulley cover with hardware PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION FOR 07-10 FXST/FLST FOR 90-06 FXST/FLST 1120-0229 Polished $1,773.95 1120-0226 Polished 1120-0230 Black 1,913.95 1120-0227 Black 1120-0237 Clear anodized 1,913.95 1120-0236 Clear anodized

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $1,489.95 1,633.95 1,633.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

481


SECTION

8

WINDSHIELDS TOURING

23/4” (69MM) OPEN BELT DRIVE KIT

LUGGAGE

•Features BDL’s ball-bearing lockup clutch •Includes motor plate, 69-tooth rear pulley with ring gear, 52-tooth front pulley, 142T-belt, starter housing and guard, stand offs, side guard and rear pulley cover with hardware PART # DESCRIPTION SUG. RETAIL FOR 07-10 FXST/FLST 1120-0210 Polished $1,759.95

SEATS & SISSY BARS EXHAUST 1120-0083

FUEL/AIR SYSTEMS 1120-0082

ENGINE

1120-0086

SS-2 2” BELT DRIVE KIT

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING

•Beautiful styling and awesome performance •2” drive features a one-piece billet motor plate •Clutch design eliminates clutch dogs and features an internal mill-cut basket to drive the clutch •Ball-bearing lockup clutch (patent pending) offers 30% more contact surface than our 3” drives •One-piece billet cover with pulley domes encloses the belt drive •Replacement 7-piece fiber friction plate set PART #2302-1250 and 7-piece steel plate set PART #2302-1251 available separately •Must order belt drive cover and accessories separately •Made in the U.S.A. FOR 90-06 FXST/FLST PART # DESCRIPTION SS-2 BELT DRIVE 1120-0082 SS-2 belt drive w/o cover SS-2 BELT DRIVE COVERS 1120-0083 Black anodized tribal cover

SUG. RETAIL $1,489.95

1120-0087

PART # DESCRIPTION SS-2 BELT DRIVE COVERS (CONT) 1120-0086 Polished tribal cover 1120-0087 Plain polished smooth cover

SUG. RETAIL $657.95 657.95

657.95

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES DS-360190

1120-0173

TANKS & 14MM X 85MM (33/8”) MONSTER TOP FUEL BELT DRIVE KIT WITH CLUTCH OIL FILTERS •Kit includes front and rear pulley, 33/8” belt, nine Kevlar friction plates and 11 steel clutch plates; use up to nine springs for varying pressure to ®

DASHES & GAUGES

accommodate any motor size •Includes oil filter mount between the pulleys •Polished outboard bearing support; outboard support is reversible and the back side is channeled for another distinct look, but only the flat side is polished •Replacement components available separately; see pages 484-485 •Made in the U.S.A.

FRAMES, NOTE: Systems are not designed for use with floorboards. SUSPENSION PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION & FENDERS FOR 90-06 FXST/FLST FOR 90-06 FXST/FLST W/ side guard $2,069.95 1120-0173 W/ outboard support bearing FOOTRESTS DS-360190 & LICENSE PLATE FRAMES 1120-0172 8MM BELT DRIVE KIT WITH OUTBOARD SUPPORT PLATE TIRES, •3” belt drive kit includes outboard bearing support for rear shaft TUBES & •Similar design to BDL’s “Top Fuel”-style belt kits Kevlar clutch assembly, outer bearings and outer support plate, WHEELS •Includes which keeps the engine and transmission shafts from flexing support plate is polished 6061 aluminum HARDWARE, •Outer •Accepts any 90-06 Big Twin-style starter CHEMICALS •Replacement components available separately; see pages 484-485 & TOOLS •Made in the U.S.A. COVERS, NOTE: Systems are not designed for use with floorboards. DESCRIPTION SUG. RETAIL PART # DESCRIPTION SECURITY PART # For 90-06 Softail models $1,969.95 1120-0007 For 91-98 Dyna models & GENERAL 1120-0172

482

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $2,369.95

SUG. RETAIL $1,969.95


SECTION

8

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

2302-1254 2302-1269

ENGINE

2302-1264

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

2302-1262

8MM BELT DRIVES WITH QUIET CLUTCH SYSTEM •11/2” and 15/8” kits include front pulley, belt, clutch hub, clutch basket and Kevlar® clutch set (consists of two half plates, four full plates and five steel drive plates) •Direct bolt-in applications •3” electric start kits include front pulley, belt, clutch hub and clutch basket and Kevlar® clutch set (consists of two half plates, four full plates and five steel drive plates), 6061 T-6 billet motor plate, outside guard and polished pulley cover •All systems now come with the Quiet Clutch system •Precision-machined, polished aluminum pressure plate uses nine springs and shoulder bolts to ensure even spring pressure (included in kit) •Rear pulley has a 40mm, double-row bearing with an inner stress-proof steel clutch hub to support the clutch •Replacement components available separately; see pages 484-485 •Made in the U.S.A.

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

NOTE: 3” systems are not designed for use with floorboards. NOTE: Not for use with offset primaries. PART # DESCRIPTION 15/8” SYSTEM FOR 86-06 BIG TWIN MODELS 2302-1253 For 94-06 FXST/FLST and 94-05 Dyna models 2302-1254 For 90-93 FXST/FLST and Dyna models 2302-1255 For 86-89 FXST/FLST models 2302-1259 For 94-06 FLT models 2302-1258 For 90-93 FXR and FLT models 2302-1257 For 86-89 FXR and FLT models 3” ELECTRIC START SYSTEM WITH OIL FILTER 2302-1269 For 90-93 FXST/FLST models

SUG. RETAIL $654.95 654.95 654.95 654.95 654.95 654.95

PART # DESCRIPTION 3” ELECTRIC START SYSTEMS 2302-1264 For 90-06 FXST/FLST models 2302-1265 For 86-89 FXST/FLST models 1120-0003 For 91-05 Dyna Glide models 2302-1268 For 90-94, 99 FXR models 3” KICK START SYSTEMS 2302-1261 For 91-98 custom 2302-1262 For L84-89 custom

SUG. RETAIL $1,469.95 1,719.95 1,719.95 1,719.95 779.95 779.95

2,249.95

OUTBOARD BEARING RETROFIT KIT •This kit has been updated to eliminate the front pulley and engine shaft supports •The reason for this change is that many aftermarket components used on special-construction motorcycles do not allow proper alignment of the front engine and rear transmission shaft •Kit now supports only the rear shaft (which is all that is really required) to eliminate any problems mis-alignment of the front and rear transmission shafts •Works with existing BDL 3” open belt drive kits for Softails and Dyna Glide models not incorporating an outboard bearing support (kits not enclosed within the OEM inner/outer primary covers) •Includes outboard support plate, pulley covers and all necessary hardware •Made in the U.S.A.

PART # 1120-0171

DESCRIPTION Retrofit kit

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $668.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

483


SECTION

8

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS Clutch hub

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

484

Motor shaft pulley Clutch basket

REPLACEMENT BDL PULLEYS, CLUTCH BASKETS/HUBS •Precision machined out of aluminum and then hard anodized •Motor shaft pulleys come with nut and washer •Made in the U.S.A. BELT DRIVE KITS, D.S. # DS-360098 DS-360099 DS-360100 DS-360101 DS-360102 DS-360103 DS-360104 DS-360105 DS-360106 DS-360107 DS-360108 DS-360109 DS-360113 DS-360114 DS-360115 DS-360190 DS-360191 1120-0005 1120-0006 1120-0007 1120-0008 1120-0009 1120-0082

BELT DRIVE KITS, BDL # 61-41SE-2 61-41SE-1 61-41RB 61-41SK-4 62-40SK-3 62-39SK-2 62-39TK-1 47-31SE-5 47-31SE-4 47-31SK-3 47-31SK-2 47-31TK-1 76-47-3S 76-47-3T 76-47-2S TF-1000 TF-1000 EVO-900 EVO-900SF EVO-1200 EVO-1220 EVO-900T SS-2

2302-1253 2302-1254 2302-1255 2302-1256 2302-1257 2302-1258 2302-1259 2302-1260 2302-1261 2302-1262 2302-1263 2302-1264 2302-1265 2302-1266 2302-1268 2302-1269 2302-1270

EVB-2SL EVB-2S EVB-2T EVB-3T-4 EVB-1T EVB-1S EVB-1SL EVB-3TRB EVO-4S EVO-4T EVO-76-47-S EVO-9S EVO-9T EVO-10S EVO-12S EVO-11S EVO-3T-5 EVB-3T-5

DRAG SPECIALTIES # SIZE MOTOR SHAFT PULLEYS 1120-0036 30T 1120-0091 48T 1120-0092 48T DS-360122 47T DS-360124 39T DS-360125 39T DS-360126 40T DS-360127 41T DS-360128 31T DS-360129 31T DS-360130 47T DS-360132 47T DS-360402 48T DS-360406 48T

MOTOR SHAFT MOTOR SHAFT PULLEY, D.S. # PULLEY, BDL # DS-360127 (41T) 41S DS-360127 (41T) 41S DS-360127 (41T) 41S DS-360127 (41T) 41S DS-360126 (40T) 40S DS-360125 (39T) 39S DS-360124 (39T) 39T DS-360129 (31T) 31S DS-360129 (31T) 31S DS-360129 (31T) 31S DS-360129 (31T) 31S DS-360128 (31T) 31T DS-360132 (47T) 47S-3 47T-3 DS-360130 (47T) 47S-2 1120-0036 TFFP-30 1120-0036 TFFP-30 DS-360417 (47T) 47OFP DS-360417 (47T) 47OFP DS-360417 (47T) 47OFP DS-360417 (47T) 47OFP DS-360417 (47T) 47OFP 1120-0091 (W/O INSERT) SS-48OFP 1120-0092 (W/O INSERT) SS-48FP DS-360415 (45T) 45-EV DS-360415 (45T) 45-EV DS-360415 (45T) 45-EV DS-360416 (45T) 48-EVSH DS-360402 (45T) 48-EVB DS-360402 (45T) 45-EVSH DS-360402 (45T) 45-EVSH DS-360416 (45T) 45-EVSH DS-360122 (47T) 47EV-3 DS-360122 (47T) 47EV-3 DS-360132 (47T) 47S-3 DS-360417 (47T) 47OFP DS-360417 (47T) 47OFP DS-360132 (47T) 47-S3 DS-360419 (47T) 47S-3E DS-360418 (48T) 48OFP 47EV-3E DS-360402 (48T) 48EVB BDL # TFFP-30 SS48-OFP SS48-FP 47EV-3 39T 39S 40S 41S 31T 31S 47S-2 47S-3 48EVB 48-EVB

SUG. RETAIL $222.95 111.95 156.95 111.95 66.95 66.95 66.95 66.95 66.95 66.95 100.95 111.95 100.95 111.95

CLUTCH BASKET, D.S. # DS-360139 (61T) DS-360139 (61T) DS-360138 (62T) DS-360138 (62T) DS-360138 (62T) DS-360148 (47T) DS-360148 (47T) DS-360153 (76T) DS-360152 (76T) 1120-0042 1120-0042 1120-0051 (72T) 1120-0051 (72T) 1120-0051 (72T) 1120-0051 (72T) 1120-0051 (72T) 1120-0093 1120-0093 DS-360411 (68T) DS-360411 (68T) DS-360411 (68T) DS-360412 (68T) DS-360411 (68T) DS-360411 (68T) DS-360411 (68T) DS-360411 (68T) DS-360136 (72T) DS-360136 (72T) 1120-0052 (79T) DS-360413 (72T) DS-360413 (72T) DS-360414 (76T) DS-360413 (72T) DS-360413 (72T) DS-360413 (72T) DS-360412 (68T)

CLUTCH CLUTCH BASKET, BDL # HUB, D.S. # 61E 61E 62K 62K 62K 47E 47E 76K-3 76K-2 TFRP-46 1120-0035 TFRP-46 1120-0035 72-3E-X DS-360404 72-3E-X DS-360404 72-3E-X DS-360404 72-3E-X DS-360404 72-3E-X DS-360404 SS-69RP DS-360404 SS-69RP DS-360404 EV-475 DS-360404 EV-475 DS-360404 EV-475 DS-360405 EV-460 DS-360406 EV-475 DS-360405 EV-475 DS-360404 EV-475 DS-360404 EV-475 DS-360403 72S-3 DS-360404 72S-3 DS-360405 76ET-3 DS-360406 72-3E DS-360404 72-3E 76-3E DS-360403 72-3E DS-360404 72-3E DS-360404 72-3E DS-360404 EV-460 DS-360406

DRAG SPECIALTIES # SIZE BDL # MOTOR SHAFT PULLEYS (CONT) DS-360415 45T 45-EV DS-360416 45T 45-EVSH DS-360417 47T 47OFP DS-360418 48T 48OFP DS-360419 47T 47OFP CLUTCH BASKETS 1120-0042 46T TFRP-46 1120-0051 72T 72-3E-X 1120-0052 79T 76ET-3 1120-0093 69T SS-69RP DS-360136 72T 72S-3 DS-360138 62T 62K DS-360139 61T 61E DS-360148 47T 47E

SUG. RETAIL $100.95 100.95 111.95 111.95 111.95 625.95 335.95 401.95 441.95 400.95 200.95 267.95 301.95

CLUTCH HUB, BDL # TFCH-180 TFCH-180 EV-180 EV-180 EV-180 EV-180 EV-180 EV-180 EV-180 EV-180 EV-475 EV-170 EV-160 EV-170 EV-180 EV-180 EV-190 EV-180 EV-170 EV-160 EV-180 EV-190 EV-180 EV-180 EV-180 EV-160

WIDTH/ PITCH 11/2”/8mm 11/2”/8mm 11/2”/8mm 11/2”/8mm 11/2”/8mm 11/2”/8mm 11/2”/8mm 11/2”/11mm 11/2”/11mm 11/2”/11mm 11/2”/11mm 11/2”/8mm 3”/8mm 3”/8mm 2”/8mm 33/8”/14mm 33/8”/14mm 3”/8mm 3”/8mm 3”/8mm 3”/8mm 3”/8mm 2”/8mm 2”/8mm 15/8”/8mm 15/8”/8mm 15/8”/8mm 11/2”/8mm 15/8”/8mm 15/8”/8mm 15/8”/8mm 15/8”/8mm 3”/8mm 3”/8mm 3”/8mm 3”/8mm 3”/8mm 3”/8mm 3”/8mm 3”/8mm 15/8”/8mm 15/8”/8mm

DRAG SPECIALTIES # SIZE CLUTCH BASKETS (CONT) DS-360152 76T DS-360153 76T DS-360411 68T DS-360412 68T DS-360413 72T DS-360414 76T CLUTCH HUBS 1120-0035 DS-360403 DS-360404 DS-360405 DS-360406 -

All part numbers in BOLD MAGENTA are new for 2010.

BELT LENGTH 132 tooth 132 tooth 132 tooth 132 tooth 132 tooth 132 tooth 132 tooth 92 tooth 99 tooth 99 tooth 99 tooth 99 tooth 144 tooth 144 tooth 144 tooth 85 tooth 85 tooth 141 tooth 141 tooth 141 tooth 141 tooth 141 tooth 140 teeth 140 teeth 138 tooth Kevlar® 138 tooth Kevlar® 138 tooth Kevlar® 138 tooth Kevlar® 130 tooth Kevlar® 130 tooth Kevlar® 130 tooth Kevlar® 138 tooth Kevlar® 141 tooth 141 tooth 144 tooth 141 tooth 141 tooth 144 tooth 141 tooth 132 tooth 141 tooth 130 tooth

BDL # 76K-2 76K-3 EV-475 EV-460 72-3E 76-3E TFCH-180 EV-190 EV-180 EV-170 EV-160

SUG. RETAIL $256.95 312.95 222.95 222.95 335.95 335.95 167.95 111.95 111.95 111.95 111.95


SECTION

WINDSHIELDS

1120-0046

1120-0047

8

DS-360173

TOURING 1120-0041

LUGGAGE

1132-0172

SEATS & SISSY BARS EXHAUST

BDL REPLACEMENT COMPONENTS •For use on BDL Belt Drive clutches PART #

BDL #

DS-191021 DS-360154 1120-0101 DS-360156

CDSB-100 ESB-100 SS-SB ECS-100

1120-0099 1120-0100 DS-360157

SS-DS SS-DSR SG-1

DS-360158 DS-360159 2110-0067 1120-0057 1120-0047 DS-360163 DS-360173 1131-0247 1132-0172 1120-0096 1120-0097 1120-0098 1131-0503

SG-2 SG-2PG PG-100 PG-100A TFSH-100 CAP-2 EHB-100 TFSS-PP EPP-100 SS-PP SS-SBB SS-CBB -

DS-360174 DS-360175 2302-1250 1131-0248 2302-1251

ECP-100 ECP-200 ERCP-100 TFSS-CP ERCS-100

SUG. RETAIL

DESCRIPTION 3

1

Shoulder bolts, /8” x 1 /4” (9-pk.) Shoulder bolts, 3/8” x 11/2” (6-pk.) Shoulder bolts, 3/8” x 3/4”, 2” belt drive (4-pk.) 1.365” clutch springs, Top Fuel/Quiet Drive clutch belt drives (6-pk.) Clutch diaphragm spring, 2” belt drive Clutch diaphragm spring retainer, 2” belt drive 66T starter ring gear 65-84 Big Twin w/ quiet clutch (73/8” i.d.) 66T starter ring gear 70-93 Big Twin (67/8” i.d.) 66T starter ring gear w/ 9T pinion gear 94-06 Big Twin 9T starter pinion gear, 90-06 Big Twin (31/4” L) +1” 9T starter pinion gear for 90-06 Big Twin Starter housing, 33/8” Top Fuel belt drives Clutch adjusting plate 40mm double-row hub bearing (ea.) Pressure plate, 33/8” belt drives Pressure plate, 3î belt drive Pressure plate, 2” belt drive Repl. 3/8” steel ball bearings, 2” belt drive (32-pk.) Repl. 3/8” carbide ball bearings, 2” belt drive (4-pk.) Round dog clutch plate kit (7 Red Eagle fiber plates, 7 steel plates and backing plate) Kevlar® clutch plate one-sided, inner splined (ea.) Kevlar® clutch plate two-sided, inner splined (ea.) Kevlar® clutch plates, round dog, quiet clutch (7-pc.) Kevlar® clutch plates, 33/8” Top Fuel belt drives (9-pc.) Steel drive plates, inner splined, quiet clutch (7-pc.)

$9.95 13.95 9.95 13.95

PART #

BDL #

44.95 78.95 55.95 100.95 111.95 4.95 44.95 55.95 44.95 106.95 44.95 66.95 49.95

1131-0249 DS-360177 DS-360176 DS-360035 DS-360400 DS-360401 DS-360407 DS-360408 DS-360409 DS-191027 DS-360410 1120-0041 1120-0046 1120-0034 1120-0033 1120-0045 1120-0037 1120-0038 1120-0043 1120-0044 1120-0088 1120-0089

TFSS-CS EDP-200 EDP-100 ERDS-100 EVRD-1 ESRD-1 CC-244 CC-134 CC-158 CDAS-100 HNS-100 TFMP-100 TFSG-400 TFBSB-100 TFBC-100 TFSG-1000 TFFPC-1000 TFFPC-2000 TFRPC-1000 TFRPC-2000 SS-MP SS-SH

12.95 12.95 105.95 136.95 29.95

1120-0090 1120-0039 1120-0040 1120-0102 DS-360170

SS-PDC TFHK-1000 TFHK-2000 SS-HK IBK-1

20.95 49.95 44.95

SUG. RETAIL

DESCRIPTION 3

$41.95 Steel drive plates, 3 /8” Top Fuel belt drive (11-pc.) Steel backing plate inner splined (ea.) 7.95 Steel drive plate, square dogs (ea.) 7.95 Steel drive plate, round dogs (ea.) 6.95 Round clutch dogs for Evolution 5-speed (12-pk.) 40.95 Round clutch dogs for Shovelhead 4-speed (12-pk.) 40.95 C-clip for hub bearing (ea.) 1.95 C-clip for step washer (ea.) .95 C-clip for back side of clutch hub (ea.) .95 Clutch adjustment nut w/ screw, 90-06 Big Twin 5.95 Clutch hub nut w/ seal (90-06) (ea.) 7.95 Motor plate, 33/8” Top Fuel belt drives 1,015.95 Outboard bearing support for PART # DS-360191 613.95 Outboard bearings 16.95 Outboard bearing covers 27.95 Side guard for PART #DS-360190 78.95 Front pulley cover for PART #DS-360190 55.95 Front pulley cover for PART #DS-360191/1120-0173 66.95 Rear pulley cover for PART #DS-360190 78.95 Rear pulley cover for PART #DS-360191/1120-0173 89.95 Repl. polished motor mount plate for PART #1120-0082 835.95 Repl. polished starter motor housing 111.95 for PART #1120-0082 Repl. polished dome cover for PART #1120-0082 66.95 Hardware kit for PART #DS-360190 66.95 Hardware kit for PART #DS-360191/1120-0173 78.95 Hardware kit for PART #1120-0082 55.95 1 Repl. idler assembly for 11mm, 1 /2” kits 33.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

REPLACEMENT BELTS PART #

# OF TOOTH TEETH SIZE

SUG. RETAIL

WIDTH

DRAG FITMENT

1120-0095 2302-1252 DS-360430 DS-360001 DS-360002 DS-360086 DS-360003 DS-360004 DS-360005

140T 138T 130T 132T 141T 138T 132T 141T 141T

8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm

2” 11/2” 15/8” 13/4” 13/4” 15/8” 15/8” 15/8” 3”

DS-360006 132T DS-360007 132T DS-3600081 132T

8mm 8mm 8mm

3” 11/2” 11/2”

1120-0082 $105.95 2302-1256 93.95 2302-1270, 2302-1257, 2302-1258, 2302-1259 93.95 60.95 60.95 2302-1253, 2302-1254, 2302-1255, 2302-1260 93.95 60.95 60.95 DS-360111, DS-360110, DS-360118, 100.95 DS-360117, DS-360183, 1120-0003, 1120-0005, 1120-0006, 1120-0007, 1120-0008, 1120-0009, 2302-1261, 2302-1262, 2302-1264, 2302-1265, 2302-1267 DS-360184, 2302-1268 100.95 DS-360099 50.95 DS-360098, DS-360100, DS-360104, 50.95 DS-360103, DS-360102, DS-360101

PART #

# OF TOOTH TEETH SIZE

WIDTH

DS-360009

99T

11/2”

DS-360010 DS-360011 DS-360012 DS-360013 DS-360014

92T 96T 144T 144T 144T

DS-360015 DS-360016 DS-360019 DS-360021 DS-360025 DS-360026 DS-360192

78T 69T 78T 132T 140T 140T 85T

1

11mm

DRAG FITMENT

DS-360109, DS-360108, DS-360107, DS-360106, 2302-5001 11mm 1 /2” DS-360105 1 11mm 1 /2” 1 8mm 1 /2” 8mm 2” DS-360115 8mm 3” DS-360113, DS-360114, 2302-1263, 2302-1266, 2302-5002 1 14mm 1 /2” 1 14mm 1 /2” 1 13.8mm 1 /2” 8.07mm 11/2” 8mm 3” 8mm 4” 14mm 33/8”/85mm Ds-360190, DS-360191 1

Bulls Eye belt.

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $55.95 78.95 83.95 53.95 71.95 100.95 129.95 123.95 129.95 71.95 195.95 204.95 214.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

485


SECTION

8

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

BRUTE V 14MM X 87.5MM (31/2”) BELT DRIVE SYSTEM WITH DIRECT DRIVE™ CENTER-MOUNTED ELECTRIC START •Ideal for high-performance, high-compression motors needing significantly more than average electric start capabilities •Uses a 78-tooth starter ring gear on the back side of the front pulley; starter motor is then mounted to the rear of the front pulley allowing the pinion gear to engage the starter ring gear •54:1 starting ratio at the crank •Starter is a proprietary “monster torque” assembly with a 6:1 planetary gear reduction •Starter motor features a polished chrome finish and pulls approximately 280-300 amps with the stock starter placement •Includes a built-in degree wheel to help with engine tuning, Pro Clutch™ set-up, a two-piece polished motor plate, super-stylish smoothie belt guard, starter relay and wiring and installation instructions •Optional variable pressure plate assembly also available; see page 496 •For replacement components and belt see page 488 •Made in the U.S.A.

PART # 1120-0122

DESCRIPTION For 00-06 FXST, FLST

SUG. RETAIL $2,833.95

ENGINE 2302-1001

TRANSMISSION & DRIVELINE

2010-0197

GASKETS & SEALS 1120-0074

ELECTRICAL BRUTE FORCE 14MM BELT DRIVE SYSTEM LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

•31/2” wide, electric start system features an integral outboard bearing support •Pulleys and belts last longer with the upper and lower carbon fiber safety guards •Polished finish •An optional license plate bracket with LED taillight is available •For replacement belt see page 488 •Made in the U.S.A.

BRUTE V 14MM 31/2” BELT SYSTEM

PART # 1120-0074 2010-0197

PART # 2302-1000 2302-1001

DESCRIPTION For 90-06 FXST, FLST License plate/taillight assembly

SUG. RETAIL $3,696.95 507.95

•Kits include front pulley, belt, rear pulley, Pro Clutch hub, clutch, starter housing, backing plate and outer belt guard •Available for models with electric start •Replacement belt available separately •Optional variable pressure plate assembly also available; see page 496 •For replacement components and belt see page 488 •Made in the U.S.A. DESCRIPTION For 00-06 FXST/FLST models For 90-99 FXST/FLST models

SUG. RETAIL $2,985.95 2,080.95

1120-0222

BRAKES TANKS & OIL FILTERS 1120-0123

DASHES & GAUGES

1602-0204

FRAMES, BRUTE IV 8MM X 75MM (3”) EXTREME™ BELT DRIVE SYSTEM a fully polished one-piece motor plate, entirely designed for bolt-on SUSPENSION •Features component pieces & FENDERS •Front and rear pulleys have bolt-on polished stainless flanges •Outer guard guard is 3/8” thick billet aluminum FOOTRESTS •Mounts for optional center-mount oil filter & LICENSE •All-new starter nose assembly conceals the jackshaft components PLATE FRAMES •Includes front and rear pulleys, motor plate assembly, 3” belt, clutch hub, pack and outer guard, and a redesigned Pro Clutch™ assembly for maximum torque transference TIRES, •Optional brake and shifter mid-control kits for PART #1120-0123 only also available with 1622-0196 polished finish (sold separately; pegs not included) TUBES & variable pressure plate assembly also available; see page 496 WHEELS •Optional •For replacement components and belt see page 488 HARDWARE, •Made in the U.S.A. DESCRIPTION SUG. RETAIL PART # DESCRIPTION CHEMICALS PART # BRUTE IV EXTREME BELT DRIVE CONTROL KITS FOR PART #1120-0123 ONLY & TOOLS 1120-0221 Mid-control brake and shift kit For 08-10 FXCW/C $2,065.95 1622-0195 Mid-control shift kit only For 07-10 FXST, FLST 2,032.95 1602-0204 COVERS, 1120-0222 Mid-control brake kit only For 90-06 FXST, FLST 1,548.95 1622-0196 SECURITY 1120-0123 For 06-10 FXD 2,032.95 Will not accept mid-controls. & GENERAL 1120-0222 1 1

1

486

1

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $933.95 304.95 707.95


SECTION

8

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS

BRUTE IV 2” OPEN TOURING BELT DRIVE •2” wide, 8mm belt •Features a stylish, one-piece aluminum motor plate •Allows you to retain the floorboards in the stock position without having to cut, weld or move existing brackets •Has a built-in provision for a heel-toe shifter shaft •Kit includes the starter extension components, billet jackshaft support cover, all necessary hardware and installation instructions •Made in the U.S.A. PART # 1120-0223

EXHAUST

DESCRIPTION For 90-06 FXR, 90-06 FLT, FLHT, FLHR, FLTR

SUG. RETAIL $2,105.95

FUEL/AIR SYSTEMS ENGINE

1120-0014

TRANSMISSION & DRIVELINE

1120-0013

GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1120-0195

BRUTE IV BELT DRIVE SYSTEM •3” open electric start 8mm belt drive kits •Complete drive belt kit includes: front pulley, rear pulley (clutch basket), Gates fiberglass belt, complete Pro Clutch assembly, complete billet aluminum motor plate assembly (with jack-shaft for starter), all necessary hardware and comprehensive installation instructions •Optional variable pressure plate assembly also available; see page 496 •For replacement components and belt see page 488 •Made in the U.S.A. PART # 1120-0014 1120-0013 1120-01951 1

DESCRIPTION For 00-06 FXST, FLST For 90-99 FXST, FLST For 01-06 FLHT, FLHR, FLHX and FLTR

CABLES BRAKES

SUG. RETAIL $1,930.95 1,886.95

TANKS & OIL FILTERS

2,009.95

DASHES & GAUGES

Includes a flat outer belt guard, no pulley domes.

BRUTE III EXTREME 11MM BELT DRIVE SYSTEMS •Specially designed for high-horsepower (150 hp capability) street or competition applications generating extreme shockloads •Feature the latest technological advances in primary drive power transfer and primary belt design •Include Pro Clutch™ assembly, starter ring gear, mating pinion gear (if required), one-piece sealed bearing for the inner primary (to replace stock two-piece bearing) and 13/4” dense-pack Kevlar® polychain belt •Fit inside stock or aftermarket inner and outer primary covers •Optional variable pressure plate assembly also available; see page 496 •For replacement components and belt see page 488 •Made in the U.S.A. PART # 1120-0073 1120-0071 1120-0070 1120-0072

DESCRIPTION For 94-99 FXST, For 94-99 FXST, For 90-93 FXST, For 90-93 FXST,

FLST FLST FLST FLST

and and and and

94-98 94-98 91-93 91-93

Dyna, Dyna, Dyna, Dyna,

includes includes includes includes

1120-0070

84-tooth ring gear and 10-tooth pinion gear 102-tooth ring gear 66-tooth ring gear 84-tooth ring gear and 10-tooth pinion gear

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $1,008.95 974.95 934.95 1,008.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

487


SECTION

8

WINDSHIELDS TOURING 1120-0186

LUGGAGE

1120-0214

SEATS & SISSY BARS SLIMLINE BELT DRIVES EXHAUST FUEL/AIR SYSTEMS ENGINE

1602-0204

•Standard offset drive includes front and rear pulleys and Pro clutch assembly with carbon fiber or polished aluminum guard •One-piece motor plate with polished finish •Slim 13/4”, 11mm dense pack Kevlar polychain belt •Tested to withstand horsepower loads in excess of 150 hp •Optional brake and shifter mid-control kit also available with polished finish (sold separately; pegs not included) •Made in the U.S.A. PART # SLIMLINE BELT DRIVE 1120-0186 1120-0214

DESCRIPTION

SUG. RETAIL

For 90-06 FXST, FLST; carbon fiber For 90-06 FXST, FLST; polished

$1,996.95 1,975.95

PART # MID-CONTROL KITS 1622-0195 1602-0204 1622-0196

1622-0196 DESCRIPTION

SUG. RETAIL

Brake and shift kit Repl. shift kit only Repl. brake kit only

$933.95 304.95 707.95

TRANSMISSION & DRIVELINE BRUTE III™ 8MM BELT DRIVES GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

•Kits include front pulley, 13/4” Gates brand aramid reinforced belt, complete clutch assembly, limited lifetime warranty Alto Red Eagle clutch plates, hardware and instructions •Some installations may require some modification of the inner primary •Optional variable pressure plate assembly also available; see page 496 •For replacement belts and components see below •Made in the U.S.A. PART # BELT DRIVES DS-360202 DS-360199

DESCRIPTION For 86-89 FXST, FLST For 94-99 FLT, FXR

SUG. RETAIL $778.95 876.95

PART # DESCRIPTION BELT DRIVES (CONT) DS-360201 For 90-93 FLT, FXR DS-360203 For 86-89 FLT, FXR

SUG. RETAIL $823.95 852.95

DS-360202

REPLACEMENT COMPONENTS FOR RIVERA PRIMO BELT DRIVES PART #

RIVERA PART #

SUG. RETAIL

DESCRIPTION

1131-0873 2048-0011 Clutch pack w/ Kevlar friction plates for Brute V w/ new-style hub 1131-0874 2048-0052 Clutch pack w/ Kevlar friction plates for Slimline w/ new-style hub 1131-0875 2048-0009 Clutch pack w/ Kevlar friction plates for Brute Classic w/ new-style hub 1131-0876 2048-0050 Clutch pack w/ Kevlar friction plates for Brute III Extreme/ Brute IV Extreme w/ new-style hub 1131-0504 Red Eagle fiber and steel plate kit for Brute-series belt drives 1131-0495 Extreme-duty bronze fiber and steel plate kit for Brute-series belt drives 1131-0748 PP-220K Kevlar friction plate .150”, Brute Force/Brute IV/Brute V 1131-0749 2054-0050 Kevlar friction plate .110”, Brute III Extreme/Brute IV Extreme DS-360212 PP-221 Steel drive plate .080”, Brute III/Brute Classic DS-223057 2060-0003 Steel drive plate .080”, Brute IV Extreme DS-360213 PP-221A Steel drive plate .047”, Brute III/Brute Classic DS-223055 PP-026 Steel drive plate .120”, Brute Force/Brute IV/Brute V DS-223062 2060-0004 Steel drive plate .120”, Brute IV Extreme 1131-0750 2060-0002 Steel drive plate .059”, Brute III Extreme 1131-0751 2060-0001 Steel drive plate.100”, Brute III Extreme DS-199215 2059-0001 Stock clutch spring (black) DS-199216 2059-0003 Medium clutch spring (silver) DS-199217 2059-0002 Competition clutch spring (gold) 2110-0046 2171-0002 84T ring gear for 90-93 Brute III/Brute III Extreme/Brute IV 2110-0206 2171-0007 Ring gear (66T) for 86-93 Brute III/Brute III Extreme/Brute IV 2110-0207 2171-0004 Ring gear (102T) for 94-06 Brute III/Brute III Extreme/Brute IV 2110-0209 2171-0009 Ring gear (66T) for Brute Force/Brute IV/Brute V

$137.95 135.95

125.95 69.95 24.95 11.95 12.95 10.95 10.95 10.95 10.95 10.95 9.95 8.95 28.95 30.95 28.95 130.95 104.95 122.95 77.95

2110-0047

DS-199215

132.95 PART #

RIVERA PART #

2110-0221 2110-0047 2110-0048 1120-0183

2170-0060 1186-0020 1186-0021 PP-410-A

1120-0184 PP-410 1132-0259 PP-211 1132-0260 PP-210 1132-0262 PP-205-AB 1132-0263 PP-208 1120-0181 2019-0351

2110-0046 DESCRIPTION

Ring gear (66T) for Slimline $171.95 Pinion gear (10T) for 90-93 Brute III/Brute III Extreme/Brute IV 66.95 Pinion gear (10T) 94-06 Brute III/Brute III Extreme/Brute IV 66.95 Snap ring for motor plate bearing for Brute Force/ Brute IV/Brute V 1.95 Bearing, motor plate, for Brute Force/Brute IV/Brute V 22.95 Snap ring (small) for rear of clutch hub for Brute IV .95 Snap ring (large), retainer for clutch basket bearing, for Brute III/ Brute IV/Brute III Extreme/Brute IV Extreme 2.95 Shims/adjustment washers for clutch pack (4 large, 4 small) for all models 7.95 Bearing for clutch basket for Brute III/Brute IV/Brute III Extreme/ Brute IV Extreme 60.95 Washer, front pulley, all models w/ offset pulley 2.95 1 Front pulley insert w/ /2” offset for Brute III/Brute IV/ Brute IV Extreme/Brute V 60.95 Locking tabs for retainer nuts (requires 2) for all models 2.95 Starter shaft for Brute IV/Brute V/Slimline 141.95 Starter Jackshaft shim kit to correct pinion gear to ring gear air gap 8.95

FRAMES, 1120-0185 2019-0120 SUSPENSION 1132-0261 1058-0106 & FENDERS 2110-0222 2185-0001 2110-0318 1185-0501 FOOTRESTS & LICENSE PLATE FRAMES REPLACEMENT BELTS FOR RIVERA PRIMO BELT DRIVES TIRES, RIVERA NUMBER TOOTH TUBES & PART # PART # OF TEETH SIZE WIDTH DESCRIPTION WHEELS 2302-1002 2021-0002 85T 14mm 3.5” For Drag Part #s 1120-0122, 1120-0074, 2302-1000, 2302-1001 1120-0068 2021-0018 144T 8mm 3.0” For Drag Part #1120-0013, 1120-0123, 1120-0014 HARDWARE, 1142-0084 2024-0015 101T 11mm 1.75” For Drag Part #s 1120-0124, 1120-0073, 1120-0072, 1120-0071, 1120-0070 CHEMICALS DS-360051 2024-0016 130T 8mm 1.75” For Drag Part #s DS-360199, DS-360201, DS-360203 8mm 1.75” For Drag Part #s DS-360198, DS-360200, DS-360202 & TOOLS DS-360052 2024-0018 138T 2024-0004 132T 8mm 1.5” For Drag Part #s DS-360204, DS-360205, DS-360207, DS-360208, DS-360049 COVERS, DS-360209, DS-360210 8mm 1.5” For Drag Part #s DS-360206 SECURITY DS-3600450 2024-0003 132T & GENERAL +.050”.

SUG. RETAIL $251.95 120.95 320.95 113.95 125.95

1

1

488

SUG. RETAIL

All part numbers in BOLD MAGENTA are new for 2010.

84.95 78.95


SECTION SCORPION 8MM, 3” BELT DRIVES

1120-0058

•3” belt drives designed for appearance and function •CNC-machined from 6061 T-6 billet aluminum; polished finish •100% increase in clutch capacity •Utilize Barnett’s Scorpion lock-up clutch assembly for the ultimate street or strip performance •Scorpion lock-up clutch allows the use of lighter coil springs by using adjustable pressure arms that progressively increase clutch spring pressure as rpms increase •Offset kits available separately for wide tire/frame applications, see page 490 •Suitable for street or strip on stock to high-performance motors •Made in the U.S.A.

8

WINDSHIELDS TOURING LUGGAGE

1120-0059

SEATS & SISSY BARS

NOTE: Require the use of forward controls; will not fit with floorboards. PART # DESCRIPTION FOR 90-06 SOFTAIL MODELS 1120-0058 W/ outside bearing support

SUG. RETAIL $4,294.95

PART # DESCRIPTION FOR 90-06 SOFTAIL MODELS (CONT) 1120-0059 W/ front pulley bearing support only

SUG. RETAIL

FUEL/AIR SYSTEMS

SYNCHRONOUS BELT DRIVE (SBD) •”Synchronous” means that Baker’s pulley interface with the belt has full contact in the valleys and spurs, resulting in the quietest belt drive available •Wear is minimized when compared to other belt drives that make contact on the leading edge •Provides added support to your transmission main shaft; more than any other design on the market •Inner clutch hub reaches further on the mainshaft towards the pulley nut, which reduces flex and stress on the mainshaft 1120-0208 •Motor plate and edge guard are made of 6061 1120-0196 T-6 plate stock and pulley caps and dog bone are made of 6061 T-6 forgings •Features a 10-plate clutch, 14mm large tooth belt measuring 2.4” wide and includes the outside bearing support (dog bone) •Available in show polished or black anodized finishes •Includes anti-rattle hardware designed for silent operation when idling is stopped with the clutch disengaged •Available with 0” (zero) or 0.5” offset configurations •Replacement clutch kit available separately; includes friction and steel plates •Made in the U.S.A. PART # DESCRIPTION 90-06 FXST, FLST 1120-0196 0” offset; polished 1120-0197 0” offset; black 1120-0198 0.5” offset; polished 1120-0199 0.5” offset; black

SUG. RETAIL $3,040.95 3,277.95 3,040.95 3,277.95

PART # DESCRIPTION 05-08 BIG DOG 1120-0208 0.5” offset, polished w/ 250 rear tire 1120-0209 0” offset, polished w/ 300 rear tire REPLACEMENT CLUTCH KIT 1131-1797 Repl. clutch kit

EXHAUST

$3,994.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

SUG. RETAIL $3,277.95 3,277.95 199.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

1120-0133

TANKS & OIL FILTERS

1120-0134 1120-0135

DASHES & GAUGES BELT DRIVE KITS WITH CLUTCH •Polished and complete belt drive kits with included Barnett Scorpion clutch •Outer support bearings on clutch basket and engine pulley •Kits include everything needed for installation including single stack Barnett Scorpion clutch, inner primary with eight stand-off tubes and bearing, front pulley with 0 offset insert and belt guide, front billet pulley cover with support bearing, rear pulley with bearing, starter ring gear, clutch assembly, rear pulley cover with support bearing, starter cone cover and jackshaft, outer front cover, front and rear bearing support octagon plugs and all necessary mounting hardware •Two optional belt drive covers available separately •Offset kits available separately for wide-tire/frame applications; see page 490 •Made in the U.S.A.

1120-0136

NOTE: Require the use of forward controls; will not fit w/ floorboards. NOTE: Belt drives will also fit earlier models with starter and transmission updates. NOTE: Not for use with Compu-Fire GEN II/GEN III starters. PART # DESCRIPTION FOR 90-06 FXST, FLST MODELS 1120-0133 4” Phantom belt drive kit 1120-0134 5” Dominator belt drive kit OPTIONAL COVERS 1120-0135 Poison cover

SUG. RETAIL $3,750.95 3,951.95 699.95

PART # DESCRIPTION OPTIONAL COVERS (CONT) 1120-0136 Gearhead cover REPLACEMENT DRIVE BELTS 1120-0158 4” drive belt 1120-0159 5” drive belt

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $699.95 261.95 300.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

489


SECTION

8

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

COMPLETE ENGINE OFFSET KITS •Offset motor pulley and increase spacing between inner primary and motor for fat tire/ wide frame applications •Kits include polished engine 1120-0143 spacer, offset insert and engine nut •Made in the U.S.A. SUG. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL FOR HITECH BELT DRIVES AND FOR HITECH BELT DRIVES AND BARNETT SCORPION 8MM, BARNETT SCORPION 8MM, 3” BELT DRIVES 3” BELT DRIVES (CONT) $320.95 1120-0142 17/16” offset $348.95 1120-0137 1/4” offset 1120-0138 1/2” offset 320.95 1120-0143 11/2” offset 348.95 1120-0139 3/4” offset 320.95 1120-0144 13/4” offset 348.95 1120-0140 1” offset 320.95 1120-0146 21/4” offset 348.95 1120-0141 11/4” offset 348.95 1120-0147 21/2” offset 396.95

OFFSET FRONT PULLEYS AND SPACER INSERTS

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING

DS-360422 Spacer inserts

•Used to offset motor pulley for belt alignment •Spacer inserts are available in eight widths from 1/4” to 2” and include a motor sprocket nut and mounting screws •Pulleys are for 3” systems and accept any of the spacer inserts listed •Pulleys and spacer inserts sold separately •Made in the U.S.A. SUG. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL PULLEYS FOR 3” SYSTEMS OFFSET SPACER INSERTS (CONT) DS-360422 For FXST DS-360426 3/4” insert $66.95 and FXR $111.95 DS-360427 1” insert 66.95 OFFSET SPACER INSERTS DS-360428 11/4” insert 66.95 1132-0173 Std. insert 66.95 2017-5002 11/2” insert 66.95 1 3 DS-360424 /4” insert 66.95 7806-1250 1 /4” insert 66.95 DS-360425 1/2” insert 66.95 7806-1251 2” insert 66.95

DS-350156

SEALED CLUTCH HUB NUT AND ADJUSTER KITS

MOTOR PULLEY LOCKING PLATE •For use with BDL’s standard, 3/4”, 1”, 11/4” or 11/2” offset insert kits •Kit containes three 5/16”-18 x 11/2” sockethead cap screws, three 5/16” lock washers, three 5/8” o.d. spacers and locking plate •Made in the U.S.A. PART # 1120-0235

0935-0134

•Prevent leakage of fluids through the mainshaft when using a belt drive system •Kits include clutch hub nut with seal and adjuster screw with nut •Made in the U.S.A.

DESCRIPTION Motor pulley locking plate

SUG. RETAIL $21.95

NOTE: For primary belt drive systems only. PART # DESCRIPTION DS-350156 For 86-89 tapered shaft 0935-0134 For 90-07 splined shaft w/ O-ring seal

SUG. RETAIL $23.95 $23.95

1120-0167

HANDLEBARS, CONTROLS & MIRRORS CABLES

1120-0165

1120-0163

BRAKES OUTER COVERS FOR BDL BELT DRIVES

TANKS & OIL FILTERS DASHES & GAUGES

•CNC-machined billet aluminum construction •Fit standard 3” BDL drives with 31/2” x 4” bolt pattern •Chrome or polished finish available •Made in the U.S.A. PART # DESCRIPTION CHROME 1120-0163 Finned 1120-0165 Flame 1120-0167 Toxic 1120-0169 Tribal

1120-0169 SUG. RETAIL $499.95 499.95 499.95 499.95

PART # POLISHED 1120-0164 1120-0166 1120-0168 1120-0170

DESCRIPTION Finned Flame Toxic Tribal

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES BDL BELT DRIVE TIRES, COVER ADAPTER TUBES & PRIMARY •CNC-machined from billet aluminum •Adapts original 3” BDL WHEELS BELT COVER •Billet aluminum construction motor plate with 4” x 4” HARDWARE, with a chrome-plated finish bolt pattern to the new belt drive cover 31/2” x 4” bolt pattern CHEMICALS •Styled to match Belt Drives’ popular Top Fuel 1 •Allows mounting of most new-style covers •Fits 3” open BDL belt drive systems with 3 /2” x 4” motor plate & TOOLS bolt pattern with 31/2” x 4” bolt pattern •Made in the U.S.A. COVERS, •Made in the U.S.A. DESCRIPTION SUG. RETAIL PART # DESCRIPTION SECURITY PART # Cover for BDL 3” primary $423.95 1120-0190 BDL primary cover adapter & GENERAL 1120-0049

490

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $399.95 399.95 399.95 399.95

SUG. RETAIL $69.95


SECTION

8

WINDSHIELDS TOURING LUGGAGE DS-360027

1120-0063

SEATS & SISSY BARS EXHAUST

DS-360028 1120-0062 •Chrome-plated, TIG-welded, heavy-gauge billet aluminum •For Primo Brute IV belt drive systems •Flamed-style features design on outer side •Made in the U.S.A. NOTE: Pulley covers sold separately. PART # 1120-0063 1120-0062

ENGINE

3” OPEN PRIMARY BELT GUARD

BELT SHROUDS

DESCRIPTION Flamed Smooth

SUG. RETAIL $334.95 312.95

•Machined from 6061 T-6 billet aluminum, then polished to a brilliant finish •Includes chrome-plated mounting hardware •Fits BDL 3” open belt drive kits for Softail models; order adapter to use 4” x 4” bolt pattern guards on Primo applications •Precise CNC-cut finish that lends a clean “vintage” look, with a smooth finish or with the Joker logo •Made in the U.S.A. PART # DESCRIPTION FOR BDL BELT DRIVES WITH 31/2” X 41/2” BOLT PATTERN 1120-0175 Joker 1120-0176 Smooth FOR BDL BELT DRIVES WITH 4” X 4” BOLT PATTERN DS-360027 Joker logo DS-360028 Smooth 1202-0023 Adapter for Primo Brute V drive 1202-0024 Adapter for Primo Brute IV drive

FUEL/AIR SYSTEMS

TRANSMISSION & DRIVELINE 1202-0023

GASKETS & SEALS

SUG. RETAIL $319.95 319.95 321.95 321.95 49.95 49.95

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1120-0015

CABLES BRAKES

ALTERNATOR COVER 1120-0016

FLAMED SIDE GUARDS •Keep foreign objects out of the belt drive and away from the pulleys •Made from polished billet aluminum; flame recesses are paintable •Include super-duty “H” bracket •Made in the U.S.A. PART # 1120-0015 1120-0016

DESCRIPTION For Brute IV, 3” W 8mm open belt drive For Brute V, 31/2” W 14mm open belt drive

•Built-in mounting lug fits Primo belt guard; highly polished aluminum casting •Made in the U.S.A. PART # DS-360085

DESCRIPTION For all 84-06 Big Twin open belt drive installations (except 06 Dyna Glide)

SUG. RETAIL $47.95

SUG. RETAIL $510.95 510.95

DS-191026

POLISHED DOMED PULLEY COVER KITS •Include clutch basket cover, motor pulley cover, special tape and button-head bolts with template for permanent installation •Available in two sizes to fit most Belt Drives Ltd. applications •Made in the U.S.A.

PULLEY COVERS •Made of chrome-plated billet aluminum •Fits the Primo Brute IV belt-drive system •Made in the U.S.A. PART # 1120-0060

DESCRIPTION Plain

SUG. RETAIL $312.95

PART # DS-191026

DESCRIPTION For 47-tooth motor shaft pulley and 72-tooth clutch basket (Evolution)

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $55.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

491


SECTION

8 PRIMARY CHAIN DRIVE KIT WITH BALL-BEARING LOCKUP CLUTCH

WINDSHIELDS PRIMARY DRIVE KITS

TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

•Kits include compensating sprocket assembly, chain adjuster assembly and complete clutch assembly with Kevlar® friction plates •Primary chains sold separately PART # 1120-0076 1120-0077 1120-0078

1120-0078

DESCRIPTION For 98-06 Big Twin (except 06 Dyna) For 94-97 Big Twin For 90-93 Big Twin

PRIMARY CHAIN DRIVE SYSTEMS WITH CLUTCH

SUG. RETAIL $699.95 669.90 639.95

DS-191018

•Kits include primary chain, front sprocket and nut, chain adjuster, clutch basket and clutch assembly with Kevlar® plates •Feature new-style clutch that eliminates grabbing and dragging •Made in the U.S.A.

PART # 1120-0178 1120-0179

PART # DESCRIPTION FOR 90-98 SOFTAIL, 91-98 DYNA MODELS DS-191018 90-98 electric start REPLACEMENT PARTS DS-191019 Kevlar clutch plates (7-pk.) DS-191020 Steel clutch plates (8-pk.) DS-191021 Shoulder bolts (9-pk.) DS-191027 Clutch adjusting screw w/ jam nut (ea.)

SUG. RETAIL

892.95

1120-0011

89.95 53.95 9.95 5.95

21-TOOTH COMPENSATING SPROCKET/CHAIN KIT

NOTE: 01-06 models will require an 85-00 primary chain adjuster (PART #DS-181201).

1120-0017

NOTE: 99-01 fuel-injected FLT/FLHT models will require a 36-tooth clutch shell, PART #DS-195190. PART # 1120-0010 1120-0011

•25/36 tooth sprocket combination and 102 tooth ring gear •Kits available with .500” and 1” offset •Include Rivera Pro Clutch and billet aluminum clutch basket •All kits are OEM configuration •Sold each; made in the U.S.A.

TANKS & OIL FILTERS

PART # DESCRIPTION FOR 94-06 FXST, FLST AND 94-05 DYNA 1120-0017 .500” offset 1120-0021 1” offset

DASHES & GAUGES

COMPENSATING SPROCKET/ CHAIN KITS

492

$839.95

$802.95

WITH CLUTCH

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

SUG. RETAIL

•Kit includes a steel compensating sprocket and a shot-peened heavy-duty chain •Increases acceleration by allowing the engine to rev higher at any given speed •Combination results in a 1.7:1 ratio versus the stock 1.44:1 ratio

HANDLEBARS, CONTROLS PRIMARY CHAIN & MIRRORS DRIVE KITS

BRAKES

DESCRIPTION For 90-06 FXST/FLST and FXD (except 06 Dyna Glide) For 90-06 FXST/FLST and FXD (includes compensator) (except 06 Dyna Glide)

NOTE: PART #DS-191018 comes with a new starter pinion gear that must be used on the 94-98 applications.

LIGHTING

CABLES

•Complete chain drive kit featuring BDL’s ballbearing lockup clutch for riders who want a lighter, easier to operate clutch •Provides approximately 60% more surface contact area than stock clutch for Smooth, sure power transfer to the rear wheel •Complete kit includes rear basket with 1120-0179 BDL ball-bearing clutch, front 25-tooth sprocket, Diamond primary chain and adjuster assembly •PART #1120-0179 includes BDL’s patented compensator •Made in the U.S.A.

SUG. RETAIL $1,122.95 1,122.95

•Changing the size of a compensating sprocket will alter the drive ratio •Smaller compensating sprockets increase torque in all gears and rpm at highway speeds •Larger compensating sprockets reduce torque in all gears and rpm at highway speeds •Includes sprocket and primary chain •Made in the U.S.A.

SUG. RETAIL $88.95 88.95

1212-0010

COMPENSATING SPROCKETS

NOTE: Not for use with M6 chain tensioners. NOTE: 21-tooth kits will only work with 36-tooth clutch shell. PART # DESCRIPTION FOR 85-06 FLT, FXR 1212-0010 21-tooth $336.95 1212-0011 22-tooth 336.95 1212-0012 23-tooth 336.95

NEW DESIGN COMPENSATOR SPROCKET •Three-piece patented design with no spring 1101-5001 •Weighs less than the stock sprocket •Made in the U.S.A.; U.S. Patent #6,234,909B1 PART # DESCRIPTION FOR 84-06 BIG TWIN (EXCEPT FLT/FLHT/FLHR/FLTR) 1101-5001 25-tooth compensator sprocket 1101-5002 24-tooth compensator sprocket

NOTE: 01-06 models will require an 85-00 primary chain adjuster (PART #DS-181201).

SUG. RETAIL

DESCRIPTION SUG. RETAIL For 94-06 FL/FLHT/FLHR/FLTR models $124.95 For 94-06 FXST/FLST and 94-05 Dyna Glide models 124.95

SUG. RETAIL

PART # DESCRIPTION FOR 85-06 FXST, FLST, 91-05 FXD, FXDWG 1212-0014 21-tooth $336.95 1212-0015 22-tooth 336.95 1212-0016 23-tooth 336.95

•Replacement steel compensating sprockets •Available in 23- and 24-tooth styles; both fit variable primary gear ratios

DS-191010

PART # DESCRIPTION FOR 84-86 BIG TWIN MODELS WITH PRIMARY CHAIN DRIVE DS-191010 23-tooth sprocket; repl OEM #40282-70 DS-191011 24-tooth sprocket; repl. OEM #40275-70

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $61.95 61.95


SECTION 2017-3461

WINDSHIELDS

2017-3462

COMPENSATING SPROCKET NUT

COMPENSATING SPROCKET KITS •Complete kits contain a highquality sprocket, sprocket shaft extension, sliding cam, sprocket nut and cover with spring plate PART # DS-195196 DS-195197 DS-195198

8

DS-195196

DESCRIPTION For 94-06 Big Twin (except 06 Dyna Glide) (25-tooth); repl. OEM #40308-94 For 91-93 Big Twin (24-tooth); repl. OEM #40269-85 For 84-90 Big Twin (24-tooth); repl. OEM #40275-83

SUG. RETAIL $199.95 199.95 199.95

•For use on 84-06 Big Twin models •Sold each PART # DESCRIPTION SUG. RETAIL FOR 84-06 BIG TWIN (EXCEPT 06 DYNA GLIDE) 2017-3461 For 91-06; repl. OEM #40392-91 $15.95 2017-3462 For 84-90; repl. OEM #40392-71 15.95

TOURING LUGGAGE SEATS & SISSY BARS

COMPENSATING SPROCKET SHAFT EXTENSIONS

EXHAUST

•Hardened alloy steel extension has been precision ground •For use with OEM or most aftermarket compensating sprockets •Used when offsetting transmission in wide tire applications PART # DESCRIPTION FOR 91-06 BIG TWIN (EXCEPT 06 DYNA GLIDE) 1120-0001 +1” extension 1120-0002 +13/8” extension

DIAMOND PRIMARY CHAINS

1120-0001

SUG. RETAIL $59.95 59.95

PRIMARY CHAINS •Select steel alloys for maximum strength •Shot-peened heavyduty side plates and solid rollers •Endless construction features perfectly cylindrical bushings for uniform wall thickness •Factory prestressed PART # BHD-82 BHD-76 BHD-94

•Endless link Diamond primary chain •Made in the U.S.A.

DS-192090

SUG. PART # DESCRIPTION RETAIL DS-192090 For 84-06 Big Twin (4-speed), 84-06 FXST/FLSTand 91-05 Dyna Glide; size #428-2-82; repl. OEM #40007-36A/36B $99.95 DS-192094 For 84-06 FLT, FXR, FXRS, FXRT; size #428-2-76; repl. OEM #40037-79 91.95 DS-192092 For 86-10 XL (except 04-09 XL 1200); size #35-3-94; repl. OEM #40005-57 90.95

BHD-76

DESCRIPTION For 84-06 FXST/FLST and 91-05 Dyna Glide; size #428-2-82; repl. OEM #40007-36A/36B For 84-06 FXRS, FXR, FXRT, FLT; size #428-2-76; repl. OEM #40037-79 For 86-10 XL (except 04-10 XL 1200); size #35-3-94; repl. OEM #40005-57

PRIMARY CHAIN ADJUSTER PLATE LOCK TAB •Sold each DESCRIPTION For 84-00 Big Twin; repl. OEM #39996-65

SUG. RETAIL $78.95 72.95

PRIMARY CHAIN ADJUSTERS

TRANSMISSION & DRIVELINE

ELECTRICAL

•Includes bracket shoe and all required hardware •Zinc-plated •Replaces OEM adjuster PART # 7805-0022

65.95

SUG. RETAIL $.95

LIGHTING

DESCRIPTION For 91-03 XL models (ea.); repl. OEM #39970-91, 3242

•Automatically adjust the tension of the primary chain •Provide constant and even tension, which improves gear shifting •Reduce shifting noise; makes for a smoother ride •Extend primary chain life •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL CHAIN TENSIONERS 1120-0225 For 06 Dyna Glide and 07-10 Big Twin $117.95 M6-BT-01 For 01-06 Big Twin (except 06 Dyna Glide) 117.95 DS-192006 For 84-00 Big Twin 117.95 1120-0161 For 04-10 XL/XR1200 117.95 DS-192008 For 91-03 XL 117.95

SUG. RETAIL $23.95

DS-192006

PRIMARY CHAIN ADJUSTER KIT

DS-192008 DS-192007 PART # DESCRIPTION CHAIN TENSIONERS (CONT) DS-192007 For 86-90 XL

BRAKES SUG. RETAIL $117.95

PART # DESCRIPTION SUG. RETAIL REPLACEMENT SHOES DS-192009 For DS-192006, M6-BT-01 $22.95 DS-192010 For DS-192007 22.95 DS-192011 For DS-192008 22.95

1120-0079

PRIMARY CHAIN ADJUSTING SHOE DS-181201

PART # DESCRIPTION SUG. RETAIL 1120-0160 For 01-06 Big Twin (except 06 Dyna) $52.95 DS-181201 For 84-00 Big Twin models; repl. OEM #s 39998-65, 39996-65, 39993-65, 39990-65, 39976-65B, 7778, 6703, 6400BH, 5444, 2614 and 1783 69.95

•Replaces stock nylon shoe PART # 1120-0079 DS-192002 DS-192003

HANDLEBARS, CONTROLS & MIRRORS CABLES

DS-192002

•Used for updating an old adjuster system or when building a new bike from the ground up •Complete kit includes washers, adjuster plate, bolts, shoe, adjuster and nut

ENGINE

GASKETS & SEALS

M6 CHAIN TENSIONERS

PART # 1120-0189

FUEL/AIR SYSTEMS

DS-192003

DESCRIPTION For 01-06 Big Twin models (except 06 Dyna); repl. OEM #39976-01 For 84-00 Big Twin; repl. OEM #s 39976-65 and 39976-65B For 86-90 XL; repl. OEM #39966-80

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $7.95 6.95 6.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

493


SECTION

8 STREET PERFORMANCE 9-PLATE CLUTCH (SP9™)

1130-0127

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

•Highest torque capacity of any wet Big Twin clutch •Constructed of billet 6061 T-6 aluminum and features Baker’s new function-formed design 2110-0246 •Available with 36- or 37-tooth 8620 steel chain sprockets •K2 proprietary high-energy friction material has a superior coefficient of friction and long life •20 one-sided friction plates balance temperature and head dissipation; heat is the #1 enemy of clutches •Features Baker’s exclusive 1-piece basket/66T ring gear •Light (yellow), medium (red) and heavy-duty (blue) clutch springs included •Replacement clutch kit available separately; includes 20 one-sided friction plates •Made in the U.S.A.

•Nine Kevlar® friction plates provide for 71% more friction plate area than stock •Includes hard anodized clutch hub •Features one snap ring installation with no disassembly of plates necessary 1130-0125 •Available in 36- or 37-tooth chain sprockets •Torque capacity (rear wheel) is up to 125 ft-lbs. •Features a 1-piece, 66T starter ring gear and clutch basket •Black phosphate-coated 8620 gear steel for smooth pinion-to-ring gear engagement and friction plate for stick-slip reduction 2110-0246 •66-tooth ring gear is 23% thicker than stock manufactured to AGMA 8 or better •Anodized blue carrier and pressure plate •Fits with Baker Firestarter •Replacement clutch plate kit available separately; includes friction and steel plates •Made in the U.S.A.

NOTE: Pinion gear PART #2110-0246 is available to convert 94-06 102-tooth applications to a 66-tooth ring gear. 102-tooth ring gears are known to break in high-performance applications. PART # DESCRIPTION SUG. RETAIL FOR 90-06 BIG TWIN MODELS (EXCEPT 06 FXD, FXDWG) 1130-0127 36-teeth $1,414.95 1130-0128 37-teeth 1,414.95 FOR 94-06 BIG TWIN 102-TOOTH APPLICATIONS 2110-0246 Pinion gear 94.95 REPLACEMENT CLUTCH KIT 1131-1798 Repl. clutch kit 269.95

NOTE: Pinion gear PART #2110-0246 is available to convert 94-06 102-tooth applications to a 66-tooth ring gear. 102-tooth ring gears are known to break in high-performance applications. PART # DESCRIPTION SUG. RETAIL FOR 90-06 BIG TWIN MODELS (EXCEPT 06 FXD, FXDWG) 1130-0125 36-teeth $715.95 1130-0126 37-teeth 715.95 FOR 94-06 BIG TWIN 102-TOOTH APPLICATIONS 2110-0246 Pinion gear 94.95 REPLACEMENT CLUTCH PLATE KIT 1131-1799 Repl. clutch plate kit 199.95

KING KONG KLUTCH™

1130-0138

3803-0007

1130-0012

3803-0009

1130-0137

ELECTRICAL

1605-1270

LIGHTING 3803-0010

HANDLEBARS, CONTROLS & MIRRORS

DS-223721

SCORPION BILLET CLUTCHES

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

494

•CNC-machined billet aluminum design features over twice the friction area of the stock clutch •Provide positive engagement and release •Incorporate six heavy-duty coil springs instead of the diaphragm spring; include an extra heavy-duty set of springs for higher horsepower applications •Friction plates are compatible with most primary oil •Extra-capacity clutch for 4” belt drive is 1” thicker; uses 16 friction plates and 17 steel plates •Simple bolt-on installation; requires the original clutch shell; no machining is necessary •Kits include clutch hub, drive plates, driven plates, (two) sets of clutch springs, pressure plate and necessary hardware •Sets of replacement fiber and steel clutch plates available separately •Optional clutch lock plates are specifically designed to be used to lock outer clutch basket to inner hub for removal and installation •Optional clutch hub puller PART #1605-1270 fits all applications •Made in the U.S.A. CLUTCHES AND REPLACEMENT PLATE SETS DESCRIPTION BIG TWIN APPLICATIONS For 07-10 Big Twin and 06 Dyna models For 07-10 FLSTFSE, FXSTSSE, FXDSE, FLHRSE (hydraulic clutch) For 00-06 FLST/FXST models and 99-06 FLT models w/ OEM hydraulic clutch For 98-06 Big Twin (except 06 Dyna Glide) For 90-97 Big Twin For 86-89 Big Twin XL/BUELL APPLICATIONS For 91-10 XL, 94-02 Buell (except Blast) For 84-90 XL FOR AFTERMARKET PRIMARY DRIVE Belt-drive primary (90-97 clutch hub style) 1

SCORPION CLUTCH 1130-0138 1130-0137

SUG. RETAIL

REPL. CLUTCH PLATE SET

SUG. RETAIL

$549.95 549.95

1131-0162

$186.95

1130-0011 DS-2237201 DS-223721 DS-223722

549.95 549.95 549.95 549.95

1131-0162 1131-0162 1131-0159 1131-0161

186.95 186.95 186.95 146.95

DS-223470 DS-223469

549.95 549.95

1131-0163 1131-0164

187.95 169.95

1130-0012

629.95

-

-

Order Scorpion pressure plate PART #1131-0278 for use with hydraulic system OEM #s 45380-02 or 45992-03.

OPTIONAL COMPONENTS PART # 3803-0010 3803-0007 3803-0009

SUG. DESCRIPTION RETAIL Scorpion clutch lock plate for use w/ DS-223720, DS-223469 $25.95 Scorpion clutch lock plate for use w/ DS-223721, DS-223470 25.95 Scorpion clutch lock plate for use w/ DS-223722 27.95

PART # DESCRIPTION 3803-0011 Scorpion clutch lock plate set (set of 4) 1605-1270 Scorpion clutch hub puller

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $84.95 83.95


SECTION

8

WINDSHIELDS SCORPION LOCK-UP CLUTCH •100% increase in clutch capacity 1130-0139 •Billet aluminum pressure plate •Steel inner hub •For stock to high-performance motors •Smooth, precise shifting •Coil spring sets provide maximum tuning capability •Adjustable pressure arms increase spring pressure as rpm increase •Lighter lever pull •Can be run wet or dry •Designed to fit in stock-type basket •For use with open primary or Barnett Scorpion primary cover •Made in the U.S.A. FITMENT For 07-10 Big Twin and 06 Dyna Glide For 07-10 FLSTFSE, FXSTSSE, FXDSE, FLHRSE (hydraulic clutch) For 98-06 Big Twin (except 06 Dyna Glide) For 90-97 Big Twin

SCORPION CLUTCH

SUG. RETAIL

REPL. CLUTCH SUG. PLATE SET RETAIL

1130-0139 $836.95

1131-0162

$186.95

1130-0140

836.95

1131-0162

186.95

1130-0009 1130-0006

836.95 836.95

1131-0162 1131-0159

186.95 186.95

BALL-BEARING LOCKUP CLUTCH KIT •Complete 36T clutch basket asssembly with BDL’s ball-bearing lockup clutch •Provides approximately 60% more surface contact area than stock clutch for smooth, sure power transfer •Lockup design applies extra pressure to the clutch plates for positive engagement with no clutch slippage •No increase in lever pull effort •Includes 66T ring gear and 9T starter pinion gear •Made in the U.S.A. PART # 1130-0101

DESCRIPTION For 90-06 Big Twin (except 06 Dyna Glide)

SUG. RETAIL $662.95

BALL-BEARING LOCKUP CLUTCH KIT •Complete clutch assembly with BDL’s ball-bearing lockup clutch •Kevlar® clutch plates provide 50% more clutch surface that stock •Large, 40mm double-row hub bearing provides maximum performance and strength •Polished pressure plate adds a custom touch for open belt drives PART # 1130-0175

DESCRIPTION For 90-97 Big Twin w/ stock clutch basket

LUGGAGE

SUG. RETAIL $429.95

COMPETITOR CLUTCH

2110-0052

CLUTCH KITS •Kit include chain drive clutch basket, a complete clutch assembly and starter ring gear •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1120-0224 For 06 FXD, 07-10 Big Twin (46T sprocket, 106T starter ring) $1,051.95 2110-0052 For 90-93 Big Twin (37T sprocket, 84T starter ring) 837.95

EXHAUST

•What the pros use •Kevlar® clutch pack plates have 60% more surface area than stock plates for strong, positive clutch engagement •Ball-bearing lockup pressure plate will handle any application including big-inch motors •Kit also includes inner clutch hub and diaphragm spring •Replacement plates available •Made in the U.S.A. PART # DESCRIPTION COMPETITOR CLUTCH 1130-0112 For 98-06 Big Twin w/ stock clutch basket (except 06 Dyna) 1130-0176 For 90-97 Big Twin w/stock clutch basket REPLACEMENT PARTS 1131-0861 .120” steel plate (ea.) 1131-0862 Kevlar plates (7-pc.) 1131-0863 .059” steel plate (6-pc.)

FUEL/AIR SYSTEMS

SUG. RETAIL $446.95 319.95 6.95 84.95 50.95

1130-0077

PART # DESCRIPTION FOR 91-06 BIG TWIN (EXCEPT 06 DYNA) 1130-0077 Clutch w/ 36-tooth sprocket 1130-0078 Clutch w/ 37-tooth sprocket OPTIONAL COMPONENTS 2110-0167 Starter pinion gear for 94-06 applications (9-tooth) 1131-0537 High-pressure competition clutch springs 1131-0538 Low-pressure touring clutch springs 1132-0170 Clutch shim kit

1131-0911

GASKETS & SEALS

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

$703.95 703.95

TANKS & OIL FILTERS

44.95 48.95 48.95 29.95

DASHES & GAUGES

1131-0912

DESCRIPTION For 98-06 Big Twin models (except 06 Dyna) w/ primary chain drive and stock-style basket For 98-06 Big Twin Screamin’ Eagle models (except 06 Dyna) w/ heavy-duty hydraulic clutch

All part numbers in BOLD MAGENTA are new for 2010.

TRANSMISSION & DRIVELINE

SUG. RETAIL

1131-0911 •Kits include Pro Clutch and variable pressure plate assembly •Pro Clutch provide a large increase in clutch plate surface for getting the horsepower to the rear wheel; include hub, plates and spring •Variable pressure plate assembly is easy to pull, but features increased pack pressure at higher rpm for instantaneous engagement •Fit under all OEM outer primary cov ers •Made in the U.S.A. PART # 1131-0912

ENGINE

ELECTRICAL

•Fit in stock primary with minor modification •With supplied springs, lever effort is slightly less than a stock H-D clutch, but handles engines up to 150 hp •11 friction plate, 10 steel plate design •Narrow friction rings increase effective contact diameter for increased torque capacity •Include early-style 66-tooth ring gear for increased strength and reduced tooth breakage 2110-0167 •Early-style starter pinion gear required for 94-later models to match 66-tooth ring gear supplied •Optional high-pressure clutch springs available for competition applications; increases power handling capacity to nearly 200 hp •Optional light-duty springs for light clutch pull in less demanding stock street applications •Made in the U.S.A.

PRO CLUTCH KITS WITH VARIABLE PRESSURE PLATE ASSEMBLY 1120-0224

SEATS & SISSY BARS

1130-0176

HIGHPERFORMANCE MECHANICALACTUATION CLUTCHES

NOTE: Use of a 25T compensating sprocket recommended.

TOURING

1130-0112

SUG. RETAIL $593.95 560.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

495


SECTION

8 PRO CLUTCH KITS

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

•Provide a large increase in clutch plate surface for getting the horsepower to the rear wheel •Feature a diaphragm clutch spring for maximum plate pressure •Include hub, plates and spring •Easy installation; just remove the clutch hub, press in the Pro Clutch hub and install the clutch pack •Replacement clutch components available •Optional variable pressure plate assembly also available (sold separately; see below) •Sold each DS-223264 •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL PRO CLUTCHES 1130-0099 For 06-10 Dyna and all 07-10 Big Twin models $535.95 DS-223264 For 98-06 Big Twin models (except 06 Dyna) 548.95 DS-223263 For 90-97 Big Twin models 548.95 DS-223247 For L84-89 Big Twin models 548.95 DS-223039 For 91-10 XL and 94-02 Buell models (except Blast) 507.95

DS-223247

DS-223039

DS-223263

DS-223057

DS-223053

DS-223058

REPLACEMENT COMPONENTS PART # DESCRIPTION FOR 98-10 BIG TWIN (DS-223264, 1130-0099) DS-223053 Repl. Kevlar® friction plate (8 required) DS-223054 Repl. steel plate .047” (8 required) DS-223055 Repl. steel plate .120” (1 required) FOR 90-97 BIG TWIN (DS-223263) DS-223056 Repl. Kevlar® friction plate (9 required) DS-223057 Repl. steel plate .080” (2 required) DS-223058 Repl. steel plate .047” (7 required) DS-223062 Repl. steel plate .120” (1 required)

SUG. RETAIL $14.95 10.95 10.95 12.95 10.95 10.95 10.95

PART # DESCRIPTION FOR L84-89 BIG TWIN (DS-223247) 1131-0056 Repl. Kevlar® friction plate (7 required) DS-223054 Repl. steel plate .047” (6 required) DS-223055 Repl. steel plate .120” (1 required) FOR 91-10 XL/BUELL (DS-223039) DS-223056 Repl. Kevlar® friction plate (9 required) DS-223058 Repl. steel plate .047” (8 required)

SUG. RETAIL $11.95 10.95 10.95 12.95 10.95

STM SLIPPER CLUTCH •The STM slipper clutch brings innovative performance improvements to the street market through the Controlled Engine Braking System (CEB) •Highly effective engine-to-clutch-to-rearwheel power management system decreases unwanted engine braking and rear wheel drag when braking hard for a corner •Prevents damage to the engine and gearbox by reducing the mechanical stress caused by the back torque of the engine and avoiding any chance of over-revving •Replaces the stock clutch (except basket and plates) •Replacement primary and secondary diaphragm springs and clutch tools sold separately CEB CLUTCH REPLACEMENT PARTS PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION SUG. RETAIL 3803-0013 Clutch installation tool $184.95 STM CEB CLUTCH PRIMARY SPRING 125MM 1131-0376 180kg $184.95 STM SLIPPER CLUTCH 1131-0657 130 kg 184.95 PART # DESCRIPTION SUG. RETAIL 1131-0658 140 kg 184.95 BUELL 1131-0659 150 kg 184.95 1130-0095 For 02-07 XB-9/XB-12 $1,359.95 1131-0660 160 kg 184.95 1130-0149 For 08-09 1125R 1,359.95 1131-0661 170 kg 184.95

1130-0095

PART # DESCRIPTION SUG. RETAIL STM CEB CLUTCH SECONDARY SPRING 1131-0377 30kg $84.95 1131-0378 40kg 84.95 1131-0379 50kg 84.95 1131-0380 60kg 84.95 1131-0381 70kg 84.95

BALL-BEARING LOCKUP CLUTCH CONVERSION KITS •Standard equipment with all of BDL’s 2” SS series primary drives •Converts existing clutches to a ball-bearing lockup design •Lockup design applies extra pressure to the clutch plates for positive engagement with no clutch slippage •No increase in lever pull effort •Proven performance - used to set a Bonneville land 1130-0079 speed record (Wink Eller - World’s Fastest A.M.A. sidecar at 177.874 mph) •Kits include all necessary components for a complete retrofit PART # DESCRIPTION SUG. RETAIL PART # 1130-0079 For all 3” BDL belt drives $210.95 1130-0081 1130-0080 For 90-10 Primo Pro-Clutch belt drives 210.95

1130-0080

1130-0081

FRAMES, SUSPENSION DESCRIPTION & FENDERS For 98-10 Big Twin with stock H-D clutch FOOTRESTS & LICENSE PLATE FRAMES VARIABLE PRESSURE PLATE ASSEMBLIES •Variable pressure plate assembly is easy on the hand, but features increased pack pressure TIRES, at higher rpm TUBES & •Easy to pull at the clutch lever when shifting, with a dramatic increase in clutching power under the influence of high horsepower for instantaneous engagement WHEELS •Up to 60% more pressure (clutch pack compression) enabling the use of a lighter diaphragm clutch spring HARDWARE, for up to 50% easier clutch lever effort with no loss of performance 1131-0296 CHEMICALS •Fit under all OEM outer primary covers •Made in the U.S.A. & TOOLS PART # DESCRIPTION For 90-97 Big Twin models with Pro Clutch PART #DS-223263 and all Brute III Extreme belt drives COVERS, 1131-0296 For all Brute IV belt drives; polished billet cover included SECURITY 1131-0729 For all Brute V belt drives; polished billet cover included & GENERAL 1131-0730

496

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $210.95

SUG. RETAIL $312.95 428.95 373.95


SECTION

8

WINDSHIELDS 1131-0429

TOURING LUGGAGE 1131-0419

SEATS & SISSY BARS EXHAUST 1131-0441

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS

CLUTCH PLATES AND KITS •Designed to perform under extreme heat conditions •Allow smooth, precise shifting •100% asbestos free •Kevlar® plates have higher-density compound for increased durability; organic plates for OEM replacement •Steel plates are manufactured under strict quality-control standards •Can be run wet or dry •Made in the U.S.A. KEVLAR FRICTION QTY. ORGANIC FRICTION QTY. STEEL PLATE FITS MODEL PLATE KITS INCLUDED PLATE KITS INCLUDED OEM # KITS BIG TWIN MODELS For 98-10 Big Twin 1131-0419 9 1131-0424 9 37932-98 1131-0429 For 90-97 Big Twin 1131-0420 8 1131-0425 8 37911-90 1131-0430 For L84-89 Big Twin 1131-0421 6 1131-0426 6 37931-84 1131-0431 XL/BUELL MODELS For 91-10 XL, 94-10 Buell (except 1125R) 1131-0420 8 1131-0425 8 37911-90 1131-0430 For 86-90 XL 1131-0438 7 1131-0441 7 36788-84 1131-0444

DASHES & GAUGES QTY. INCLUDED

STEEL PLATES (EACH) OEM #

8 6 7

1131-0434 1131-0435 1131-0436

37913-98 37913-90 37975-84A

6 5

1131-0435 1131-0447

37913-90 36787-84

PRICE LIST PART # 1131-0419 1131-0420 1131-0421 1131-0424

SUG. RETAIL $114.95 94.95 74.95 87.95

PART # 1131-0425 1131-0426 1131-0429 1131-0430

SUG. RETAIL $68.95 52.95 44.95 34.95

PART # 1131-0431 1131-0434 1131-0435 1131-0436

SUG. RETAIL $39.95 6.95 6.95 6.95

All part numbers in BOLD MAGENTA are new for 2010.

PART # 1131-0438 1131-0441 1131-0444 1131-0447

SUG. RETAIL $84.95 69.95 25.95 6.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

497


SECTION

8 DS-223353

WINDSHIELDS

DS-223737

TOURING LUGGAGE SEATS & SISSY BARS DS-223471

EXHAUST

DS-223734

DS-223747

DS-223732

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

DS-223746

CLUTCH PLATES AND STEEL PLATES

GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

•Designed to perform under extreme heat conditions •Allow smooth, precise shifting •100% asbestos free •Carbon fiber plates have high static and dynamic coefficient of friction for smooth positive engagement and release •Kevlar® plates have higher density compound for increased durability •Can be run wet or dry •Steel plates are manufactured under strict quality-control standards •Made in the U.S.A. CARBON STEEL FIBER PLATES SUG. KEVLAR PLATES SUG. PLATE (EA.) DESCRIPTION PART # QTY. RETAIL PART # QTY. RETAIL OEM # PART # BIG TWIN MODELS For 98-10 Big Twin DS-223471 (9-pc.) $158.95 DS-223353 (9-pc.) $136.95 37932-98 DS-223354 For 90-97 Big Twin DS-223737 (8-pc.) 133.95 DS-223734 (8-pc.) 123.95 37911-90 DS-223747 For L84-89 Big Twin DS-223731 (6-pc.) 102.95 DS-223732 (6-pc.) 92.95 37931-84 DS-223746 XL/BUELL MODELS For 91-10 XL/94-10 Buell (except 1125R) DS-223737 (8-pc.) 133.95 DS-223734 (8-pc.) 123.95 37911-90 DS-223747 For 86-90 XL DS-223773 (7-pc.) 115.95 36788-84 DS-223771

SUG. RETAIL

OEM #

$6.95 6.95 6.95

37913-98 37913-90 37975-84

6.95 6.95

37913-90 36787-84

BRAKES TANKS & OIL FILTERS HIGH-PERFORMANCE CLUTCH KITS

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

498

•Specifically designed to provide Friction kit extended clutch life, fade- and slip-free operation and superior shifting •Friction plates have our exclusive high-heat friction materials for fade-free performance •More durable than OEM plates •Steel clutch plates won’t expand; do not fade or promote clutch swell •Long lasting – up to 300% more life than stock plates •Will not muddy or contaminate oil DESCRIPTION BIG TWIN MODELS For 98-10 Big Twin For 90-97 Big Twin For L84-89 Big Twin XL/BUELL MODELS For 91-10 XL, 94-10 Buell (except 08-10 1125R/CR) For 86-90 XL

Steel Kit

OEM #

FRICTION KIT PART #

QTY. INCLUDED

SUG. RETAIL

37932-98 37911-90, 37910-90 37931-84/37-930-84A

1131-0279 1131-0280 1131-0281

9 8 6

$142.95 115.95 88.95

37911-90 36788-84

1131-0280 1131-0289

8 7

115.95 104.95

OEM #

STEEL KIT PART #

QTY. INCLUDED

SUG. RETAIL

37913-98 37913-90/37975-90 37975-84A

1131-0284 1131-0285 1131-0286

8 6 7

$71.95 53.95 57.95

37913-90 36787-84

1131-0285 1131-0292

6 5

53.95 49.95

All part numbers in BOLD MAGENTA are new for 2010.


SECTION

8

WINDSHIELDS TOURING

EXTRA PLATE CLUTCH KIT

DS-223739

•Kevlar® plates have highdensity compound for increased durability •Carbon fiber plates have high static and dynamic coefficient of friction for smooth positive engagement and release •Adds 12% more surface area to clutch pack •Contains nine friction plates and eight steel drive plates •Made in the U.S.A.

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

NOTE: Double steel drive plate not used with this kit.

EXTRA PLATE CLUTCH KIT •Kevlar® plates have high static and dynamic coefficient of friction for smooth, positive engagement and release •Adds 11% more surface area to clutch pack •Consists of 10 friction plates and nine steel plates •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL DS-223472 For 98-10 Big Twin $204.95

PART # DESCRIPTION FOR 90-97 BIG TWIN, 91-10 XL AND 94-02 BUELL DS-223750 Carbon fiber extra plate clutch kit DS-223739 Kevlar extra plate clutch kit

SUG. RETAIL $184.95 178.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

EXTRA PLATE CLUTCH KIT

COMPLETE CLUTCH KIT ®

•Kit includes nine Kevlar friction plates, eight steel plates and five replacement springs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL DS-223473 For 02-07 V-Rod $179.95

1131-0496

•Kevlar® plates have higher density compound for increased durability •Adds 11% more surface area to clutch pack for high-performance applications •Consists of 10 friction plates and nine steel plates •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL DS-223474 For 02-07 V-Rod $199.95

1131-0497

CABLES EXTRA PLATE CLUTCH KIT •Kit includes nine Bar-Flex friction plates and eight steel drive plates •Adds 28% more surface area •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL DS-223763 For 86-90 XL models $202.95

1131-0502

1131-0506

•Provides a large increase in clutch plate surface for getting the horsepower to the rear wheel •Optional extreme-duty bronze plates available to replace fiber plates •Meets or exceeds OEM specifications •Sold each •Made in the U.S.A.

PART # DESCRIPTION CLUTCH PLATE KITS 1131-0506 For Pro Clutch DS-223247 1131-0507 For Pro Clutch DS-223039 CLUTCH PLATE KITS (CONT) 1131-0508 For Pro Clutch DS-223263

QTY. INCLUDED

SUG. RETAIL

7 9

$81.95 103.95

9

107.95

INDIVIDUAL CLUTCH PLATES SUG. RETAIL $22.95 11.95 4.95 4.95 5.95

TANKS & OIL FILTERS DASHES & GAUGES

RIVERA PRO CLUTCH PLATE KITS

PART # DESCRIPTION FOR 90-97 BIG TWINS (DS-223263) 1131-0496 Bronze clutch plate (nine required) 1131-0497 Kevlar clutch plate (nine required) 1131-0498 Steel plate .047” (seven required) 1131-0499 Steel plate .080” (two required) 1131-0500 Steel plate .100” (one required)

BRAKES

(ea.) (ea.) (ea.) (ea.) (ea.)

PART # DESCRIPTION FOR 90-97 BIG TWINS (DS-223263) 1131-0501 Steel plate .120” (one required) FOR L84-89 BIG TWINS (DS-223247) 1131-0502 Red Eagle clutch plate (seven required) 1131-0499 Steel plate .080” (one required)

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $5.95 (ea.) 8.95 (ea.) 4.95 (ea.)

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

499


SECTION

8 CARBONITE

WINDSHIELDS HI-PERFORMANCE POWERPAK KITS

TOURING LUGGAGE SEATS & SISSY BARS EXHAUST

•Made from 3M™ carbon-based friction-based material to withstand higher coefficients of friction and higher temperatures than any other product available •Kolene® Melonite® treated steels for enhanced performance, engagement, longer life and cooler running •10% more surface area for greater holding power •Made in the U.S.A. PART # 1131-0463 1131-0460 1131-0462 1131-0752

1131-0463

DESCRIPTION For 98-10 Big Twin; includes 10 carbonite frictions and nine Kolene steels For 90-97 Big Twin, 91-10 XL, 94-02 Buell (except Blast); includes 10 carbonite frictions and nine Kolene steels For L84-89 Big Twin; includes seven carbonite frictions and eight Kolene steels For 03-10 Buell (except 1125R, Blast); includes eight carbonite frictions and eight Kolene steels

SUG. RETAIL $152.95 152.95 152.95 152.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE 1131-0478

GASKETS & SEALS

1131-0472

1131-0465

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

500

1131-0468

1131-0475 1131-0459

1131-0494

CLUTCH PLATES AND KITS •Kit is available with Red Eagle® organic or Kevlar® friction plates •Kevlar® plates are for high-performance applications; Red Eagle organic plates are for OEM replacement •Increased surface area for decreased slipping •Increases holding while decreasing heat generation •Precision-made steel plates •Can be run wet or dry •Meets or exceeds OEM specifications •Made in the U.S.A.

FITMENT FOR BIG TWINS 98-10 90-97 L84-89 FOR XL /BUELL MODELS 91-10 XL/94-10 Buell (except 1125R, Blast) 86-90 XL

RED EAGLE PLATE KIT

QTY. INCLUDED

KEVLAR PLATE KIT

QTY. INCLUDED

OEM #

STEEL PLATE KIT

QTY. STEEL PLATE INCLUDED (EACH)

OEM #

1131-0478 1131-0465 1131-0468

9 8 6

1131-0477 1131-0472 1131-0475

9 8 6

37932-98 37911-90/37910-90 37931-84/37930-84A

1131-0487 1131-0482 1131-0485

8 6 7

1131-0455 1131-0459 1131-0494

37913-98 37913-90 37975-84A

1131-0465 1131-0464

8 7

1131-0472 1131-0471

8 7

37911-90/37910-90 36788-84

1131-0482 1131-0479

6 5

1131-0459 -

37913-90 36787-84

PRICE LIST PART # 1131-0455 1131-0459 1131-0464 1131-0465

SUG. RETAIL $7.95 (ea.) 7.95 (ea.) 42.95 36.95

PART # 1131-0468 1131-0471 1131-0472 1131-0475

SUG. RETAIL $27.95 74.95 79.95 62.95

PART # 1131-0477 1131-0478 1131-0479 1131-0482

SUG. RETAIL $77.95 63.95 25.95 41.95

PART # 1131-0485 1131-0487 1131-0494

SUG. RETAIL $33.95 41.95 6.95 (ea.)

SPRING PLATE •Quality construction •Sold each •Made in the U.S.A. PART # 1131-0453

DESCRIPTION For 91-97 Big Twin, 91-10 XL and 94-02 Buell (except Blast); repl. OEM #37977-90

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $52.95


SECTION

8

WINDSHIELDS TOURING HIGH-PERFORMANCE CLUTCH KIT WITH EXTRA PLATE •Includes 10 Kevlar® friction plates on 6061 T-6 aluminum cores, nine tempered steel drive plates and a 10% stronger than stock diaphragm spring •Plates have 11% more surface area for more positive clutch engagement – ideal for big-bore models •Pre-measured stack height for easy installation •Made in the U.S.A. PART # 1131-1806

DESCRIPTION For 98-10 Big Twin models

LUGGAGE SEATS & SISSY BARS

SUG. RETAIL $179.95

EXHAUST

HIGH-PERFORMANCE EXTRA CLUTCH PLATE KIT

FUEL/AIR SYSTEMS

•Kit includes nine Kevlar® friction plates on tempered steel cores and eight tempered steel drive plates •Plates feature a starburst groove pattern for maximum heat dissipation and oil circulation •15% larger than stock surface area for stronger, more positive clutch engagement – ideal for high-performance stroker motors •Pre-set stack height for easy installation •Made in the U.S.A. PART # 1131-1804

ENGINE

DESCRIPTION For 90-97 Big Twin and 91-10 XL

SUG. RETAIL $124.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING

CLUTCH PLATE KIT CLUTCH PLATE KIT •Includes nine Kevlar® friction plates on 6061 T-6 aluminum cores and eight tempered steel drive plates •Stack height is pre-set for easy installation •Made in the U.S.A. PART # 1131-1805

DESCRIPTION For 98-10 Big Twin models

SUG. RETAIL $139.95

•Includes six Kevlar® plates with tempered steel cores and seven tempered steel drive plates •Plates measure 25% wider than the OEM plates for a significant increase in the clutch area •Stack height is pre-set for easy installation •Can be used in wet or dry clutches •Made in the U.S.A. PART # 1131-1803

DESCRIPTION For L84-89 Big Twin

SUG. RETAIL $79.95

BRAKES

DASHES & GAUGES

•Kit includes 10 Kevlar® friction plates on 6061 T-6 aluminum cores, nine tempered steel drive plates and five zero-collapse type clutch springs •Clutch plates have 11% more surface area than stock for better clutch engagement •Pre-measured stack for easy installation •Made in the U.S.A. DESCRIPTION For 02-10 V-Rod models

SUG. RETAIL $172.95

BIG DOG CLUTCH KIT •Replaces friction and steel plates on Big Dog OEM nine-plate clutches •Made in the U.S.A. PART # 1131-1800

CABLES

TANKS & OIL FILTERS

HIGH-PERFORMANCE CLUTCH PLATE KIT WITH EXTRA PLATE

PART # 1131-1807

HANDLEBARS, CONTROLS & MIRRORS

DESCRIPTION For 08-09 Big Dog models w/ 9-plate clutch

SUG. RETAIL $199.95

All part numbers in BOLD MAGENTA are new for 2010.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

501


SECTION

8 DS-199218

WINDSHIELDS

DS-223742

TOURING

DIAPHRAGM CLUTCH SPRING •Standard replacement spring •Made in the U.S.A.

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

PART # DS-223355 •Heavy-duty springs approximately 20% stronger than OEM •Recommended for competition use •Made in the U.S.A. PART # DS-199218 DS-223742 DS-223743

DESCRIPTION For 98-10 Big Twin For 90-97 Big Twin and 91-10 XL For 86-90 XL

SUG RETAIL $31.95 32.95 25.95

TRANSMISSION & DRIVELINE

ELECTRICAL LIGHTING

•Converts your diaphragm spring clutch system to coil spring system •Allows for more precise adjustment and smoother operation •Increases the holding capacity of the clutch •Utilizes the stock clutch hub, shell and clutch plates •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL DS-199219 For 98-06 Big Twin (except 06 Dyna Glide) $209.95

1131-0454

•If your Big Twin has been modified to produce more horsepower, you probably need more spring pressure in your clutch •Available in three different rates: stock for stock engines, medium for high-performance street engines and competition for all-out racing engines •Sold each •Made in the U.S.A. PART # DESCRIPTION FOR 90-97 BIG TWIN AND 91-10 XL DS-199215 Stock spring DS-199216 Medium spring DS-199217 Competition spring

$28.95 30.95 28.95

•Strong billet aluminum design for use with Scorpion clutch PART #DS-223720 when converting to a hydraulic clutch system. •Made in the U.S.A. DESCRIPTION For 00-06 Softail and 99-06 FLT models using hydraulic clutch system) OEM #s 45380-02 or 45992-03)

SUG. RETAIL

$143.95

1131-0450

BRAKES

DIAPHRAGM CLUTCH SPRINGS

2004-0017

•Standard duty replacement spring •Made in the U.S.A. PART # 1131-0450 1131-0454 2004-0017

CLUTCH PRESSURE PLATE •Tough die-cast construction

DESCRIPTION For L84-89 Big Twin; repl. OEM #37871-84 For 98-03 Big Twin; repl. OEM #37871-98 For 90-97 Big Twin; repl. OEM #37871-90

SUG. RETAIL $11.95 12.95 22.95

SUG. PART # DESCRIPTION RETAIL 1132-0269 For 91-97 Big Twin, 91-10 XL and 94-02 Buell (except Blast); repl. OEM #37912-91 $19.95

FRAMES, SUSPENSION SCORPION LOCK-UP & FENDERS PRESSURE PLATE •Direct bolt-on FOOTRESTS •Progressively increases & LICENSE pressure as rpm increase PLATE FRAMES •Easily adjustable by adding or subtracting supplied weights on six pressure arms TIRES, •For use with existing Scorpion clutch with open primary or Scorpion primary cover TUBES & (sold separately) BILLET PRESSURE PLATE WHEELS •CNC-machined from 2024 T-3 billet aluminum •Strong billet aluminum design, 1131-1156 works with stock or heavy-duty HARDWARE, •Made in the U.S.A. diaphragm spring DESCRIPTION SUG. RETAIL CHEMICALS PART # 1131-1156 For 07-10 Big Twin and 06 Dyna Glide $342.95 •Made in the U.S.A. & TOOLS 1131-1157 PART # DESCRIPTION For 07-10 FLSTFSE, FXSTSSE, FXDSE, FLHRSE (hydraulic clutch) 342.95 2012-1270 For 90-97 Big Twin, 91-10 XL and COVERS, For 98-06 Big Twin (except 06 Dyna Glide) 342.95 94-02 Buell models (except Blast); SECURITY 1131-0277 repl. OEM #37912-91 342.95 For 90-97 Big Twin & GENERAL 1131-0276

502

SUG. RETAIL

SCORPION PRESSURE PLATE

PART # 1131-0278

CABLES

DASHES & GAUGES

DS-199215

DIAPHRAGM CLUTCH SPRINGS

CLUTCH SPRING CONVERSION KIT

HANDLEBARS, CONTROLS & MIRRORS

TANKS & OIL FILTERS

SUG. RETAIL $31.95

HEAVY-DUTY CLUTCH SPRINGS

ENGINE

GASKETS & SEALS

DESCRIPTION For 98-10 Big Twin; repl. OEM #37871-98

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL

$115.95


SECTION DS-195192

DS-195000

DS-195002

DS-195009

INNER CLUTCH HUBS •Improved inner clutch hub that won’t split at the keyway •Available in three styles PART # DS-195000

DESCRIPTION For 98-06 Big Twin (except 06 Dyna Glide); repl. OEM #37550-98 For 90-97 Big Twin; repl. OEM #37550-90A For L84-89 Big Twin; repl. OEM #37550-84A

DS-195002 DS-195009

SUG. RETAIL $129.95 129.95 149.95

WINDSHIELDS

CLUTCH SHELL

TOURING

•High-quality replacement clutch shell with starter gear •93-06 styles include center bearing and snap rings •Sold each

LUGGAGE

PART # DS-195190 DS-195191 DS-195192

DS-195191

DS-195190

DESCRIPTION For 98-06 Big Twin (except 06 Dyna Glide); repl. OEM #37707-98A For 94-97 Big Twin; repl. OEM #37707-94 For 90-93 Big Twin; repl. OEM #37707-90

SUG. RETAIL $259.95 259.95 259.95

DS-193156

CLUTCH HUB BEARING

PART # DS-193156 DS-193157

PART # 1132-0285

DESCRIPTION SUG. RETAIL For 90-10 Big Twin; repl. OEM #37496-90 $13.95 For L84-89 Big Twin; repl. OEM #37496-84 8.95

PART # DS-194361

DS-192510

DESCRIPTION For 90-10 Big Twin; repl. OEM #37906-90

SUG. RETAIL

DESCRIPTION For L84-89 Big Twin; repl. OEM #37523-85

SUG. RETAIL (EA.)

PART # 0935-0081

$1.95

DS-192509

DESCRIPTION For 84-90 Big Twin, repl. OEM #12014-K

TRANSMISSION & DRIVELINE

$52.95

GASKETS & SEALS

CLUTCH ADJUSTING SCREW LOCK NUT

•Clutch hub nut oil seal kit from Genuine James Gaskets •Made in the U.S.A.

•Sold in 10-pk. •Made in the U.S.A.

EXHAUST

ENGINE

CLUTCH HUB NUT/SEAL KIT

CLUTCH HUB KEYS

SEATS & SISSY BARS

FUEL/AIR SYSTEMS

DS-195159

CLUTCH HUB NUT •High-quality steel construction •Sold individually •Made in the U.S.A.

8

•Made in the U.S.A.

SUG. RETAIL

DS-192508

$7.95

PART # DESCRIPTION DS-195159 For L84-09 Big Twin; repl. OEM #7848W (10-pk.)

SUG. RETAIL (EA.)

ELECTRICAL LIGHTING

$.95

HANDLEBARS, CONTROLS & MIRRORS

DS-192506

CABLES

DS-192505

DS-192507

BRAKES

DS-192504

TANKS & OIL FILTERS DASHES & GAUGES

CLUTCH PUSHRODS FOR 5- OR 6-SPEED BIG TWIN MODELS •Available as complete kits or as individual components •Kits include center pushrod, left pushrod, right pushrod, bearing, thrust washer and snap ring •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 87-10 FLT, FXR, FXST, FLST AND 91-05 DYNA GLIDE DS-192510 Complete kit for 98-06 models $35.95 DS-192509 Complete kit for 91-97 models 35.95 DS-192508 Complete kit for 90 models 27.95 DS-192506 Complete kit for 87-89 models 27.95 DS-192520 Clutch pushrod end, right; for 90-10 models, repl. OEM #37069-90 (2.1250”) 23.95 DS-192522 Clutch pushrod end, right; for 87-89 models, repl. OEM #37089-84 (2.6250”) 11.95 DS-192515 Clutch pushrod, center; for 90-06 models (except 06 Dyna Glide), repl. OEM #37088-90 (10.870”) 13.95 DS-192514 Clutch pushrod, center; for 87-89 models, repl. OEM #37088-87 (11.3750”) 13.95 DS-192524 Clutch pushrod end, left; for 90-97 models, repl. OEM #37090-84A (2.250”) 13.95 DS-192525 Clutch pushrod end, left; for 98-10 models, repl. OEM #37090-98 (2.255”) 13.95

PART # DESCRIPTION FOR 85-86 FLHT, FLT, FXRS, FXRT, FXRP AND FLHTP; 86 FXST DS-192505 Complete kit DS-192522 Clutch pushrod end, right; for 85-86 models, repl. OEM #37089-84 (2.6250”) DS-192513 Clutch pushrod, center; for 85-86 models, repl. OEM #37088-85 (11.1250”) FOR L84-85 FXST; 85-86 FX DS-192507 Complete kit FOR L84 FLTC, FXRT, FXRP AND FXRS DS-192504 Complete kit DS-192522 Clutch pushrod end, right; for L84 models, repl. OEM #37089-84 (.6250”) DS-192512 Clutch pushrod, center; for L84 models, repl. OEM #37088-84 (10.3750”) DS-192524 Clutch pushrod end, left; for L84 models, repl. OEM #37090-84A (2.250”)

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $27.95 11.95 15.95 27.95 27.95 11.95 15.95 13.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

503


SECTION

8

WINDSHIELDS CLUTCH PUSHROD BEARING KIT

TOURING LUGGAGE SEATS & SISSY BARS

CLUTCH ADJUSTER RELEASE PLATE

RIGHT CLUTCH PUSHROD END

•Sold each

•Stamped steel construction •Includes oil slinger

PART # DS-194977

DESCRIPTION SUG. RETAIL For 90-10 Big Twin (5-speed); repl. OEM #37903-90 $7.95

PART # 7805-0015

•Includes two thrust washers, one retaining clip and roller bearing •Made in the U.S.A.

DESCRIPTION For 90-10 Big Twin; repl. OEM #37069-90

SUG. RETAIL

PART # DS-192502

$12.95

EXHAUST FUEL/AIR SYSTEMS ENGINE

DESCRIPTION For 87-10 Big Twin; repl. OEM #s 37313-80, 11096 and 37312-75

SUG. RETAIL

$7.95

DS-223005

DS-188029

DS-188030

SNAP RINGS FOR CLUTCH PUSHRODS •Each part number is sold in 10-pk.

TRANSMISSION & DRIVELINE

PART # FOR 84-10 BIG TWIN DS-188029 DS-188030

DESCRIPTION

SUG. RETAIL (EA.)

3/4 ring; repl. OEM #11096 Full ring; repl. OEM #11096A

$.95 .95

GASKETS & SEALS

•40% easier clutch pull; less fatigue with smooth clutch action •Simple installation •Made in the U.S.A.

CLUTCH RELEASE KIT

ELECTRICAL

•Kit includes one inner ramp (25452-87A), one outer ramp (25453-87A), one coupling (34920-86), three ball bearings (8873), one snap ring (10998) and one cover gasket (36801-87B)

LIGHTING

PART # DS-194016

HANDLEBARS, CONTROLS & MIRRORS CABLES

DESCRIPTION For 87-99 Big Twin

EASYBOY LITE CLUTCH

SUG. RETAIL $36.95

PART # DS-223005

DS-223006

1130-0004

BRAKES 1130-0003

TANKS & OIL FILTERS DASHES & GAUGES

1130-0045

FRAMES, SUSPENSION 1130-0005 & FENDERS FOOTRESTS & LICENSE CLUTCH PLATE FRAMES POWER •The original Müller Power Clutch TIRES, •Replaces OEM inner and outer ramp assemblies easier clutch lever operation TUBES & •40% •Easy to install; no drilling or spacers needed WHEELS •Available for Big Twin, Sportsters and Buells HARDWARE, •Made in Germany CHEMICALS U.S. Patent #6,889,810 # DESCRIPTION & TOOLS PART 1130-0003 For 87-10 Big Twin COVERS, 1130-0004 For 94-10 XL and Buell SECURITY 1130-0005 For 86-93 XL & GENERAL 1130-0045 For Baker right-side-drive transmissions with mechanical clutch release

504

DS-223005

NOTE: Will not fit FXR, FXRS, FXRS-SP, FXRT or FXLR models.

SUG. RETAIL $172.95 172.95 172.95 172.95

All part numbers in BOLD MAGENTA are new for 2010.

DESCRIPTION For 87-99 FXST/FLST, FLT, FLTR, FLHT, FLHS, FLHR; 91-99 Dyna Glide and 86-90 XL For 91-93 XL

SUG. RETAIL

$24.95 24.95


SECTION 0612-0011

0612-0039

0612-0036

0612-0053

8

WINDSHIELDS TOURING LUGGAGE

0612-0011 0612-0036

SEATS & SISSY BARS EXHAUST

0612-0039

“MAINSTREET” HYDRAULIC CLUTCH KITS

0612-0059

•Offer very smooth feel and consistent operation •40% easier to operate than cable systems •Designed to complement early- and late-OEM brake reservoirs •Engineered and manufactured by Magura in Germany •Easy to install; step-by-step instructions included •Kits are sealed with fluid and pre-bled •56” (nonadjustable) length versions fit most applications •80” versions offer an adjustable length for custom applications •Available in black or chrome finish •Require using OEM or aftermarket clamp half •For refill, requires Magura mineral oil fluid PART # DESCRIPTION FOR 87-06 BIG TWIN MODELS (EXCEPT 06 DYNA GLIDE) 0612-0038 Mainstreet clutch, 80” black 0612-0039 Mainstreet clutch, 80” chrome FOR 86-07 XL 0612-0011 Mainstreet clutch 56”, black 0612-0012 Mainstreet clutch 80”, black 0612-0036 Mainstreet clutch 56”, chrome 0612-0037 Mainstreet clutch 80”, chrome REPLACEMENT COMPONENTS 0612-0050 Master cylinder, black 0612-0051 Master cylinder, chrome 0612-0052 Lever blade pivot bolt 0612-0053 Piston kit for master cylinder 0612-0054 Master cylinder cover, black 0612-0055 Master cylinder cover, chrome

FUEL/AIR SYSTEMS

0612-0083 0612-0062 M0720568

ENGINE M0432301-02

SUG. RETAIL $239.95 344.95 229.95 229.95 324.95 324.95 187.95 349.95 13.95 35.95 25.95 50.95

PART # DESCRIPTION REPLACEMENT COMPONENTS (CONT) 0612-0056 Master cylinder diaphragm 0612-0057 Banjo bolt w/ bleeder for XL slave cylinder 0612-0058 Tubing kit for XL, 56” 0612-0059 Tubing kit for XL, 80” 0612-0060 Slave cylinder for XL 0612-0061 Tubing kit for Big Twin, 80” 0612-0062 Slave cylinder for Big Twin 0613-0082 Lever blade, polished 0613-0083 Lever blade, chrome M0432301-02 Line compression sleeves (10-pk.) 0612-0083 Line barb fittings (10-pk.) M0999999 2 oz. mineral oil hydraulic fluid M0999020 16 oz. mineral oil hydraulic fluid M0720568 Bleeding kit

HYDRAULIC CLUTCH ACTUATOR

SUG. RETAIL $13.95 29.95 42.95 46.95 106.95 47.95 122.95 31.95 56.95 .95 .95 4.95 21.95 23.95

•Function-Formed™ style milled from 6061 T-6 aluminum •Low-profile external features allow maximum exhaust clearance •12 point stainless steel ARP bolts and gasket included •All side covers have hydraulic feed and include 1.5” diameter piston; compatible with OEM or 11/16” hydraulic master cylinders •Available with chrome or black anodized finish •Made in the U.S.A. NOTE: 93-06 FL models require Baker FF oil spout; see TANKS & OIL FILTERS section.

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1132-0136

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

SUG. RETAIL $349.95 349.95

PART # BLACK 1107-0179 1107-0181

DESCRIPTION Side cover w/ front feed Side cover w/ rear feed

1107-0179

1107-0178

FOR ALL 87-06 MODELS (EXCEPT 06 FXD, FXDWG) W/ OEM FIVE-SPEED TRANSMISSION AND ALL BAKER LEFT-SIDE DRIVE TRANSMISSIONS (EXCEPT POWERBOX AND TORQUEBOX)

Side cover w/ front feed Side cover w/ rear feed

ELECTRICAL

CABLES

FUNCTION-FORMED™ TRANSMISSION SIDE COVERS/ACTUATORS

DESCRIPTION

GASKETS & SEALS

1132-0135

•Machined from 6061 T-6 aluminum, then polished and chrome-plated •Thickness is only 13/4” to give your bike clean lines and reduce exhaust pipe clearance issues •Includes all necessary chrome mounting hardware including an AN-3 hydraulic line fitting •Super easy line bleeding is capable due to recessed “Speed Bleeder” type bleed screw – just loosen screw half a turn, pump the master cylinder lever until adequate pressure is achieved, then re-tighten PART # DESCRIPTION SUG.RETAIL •Excellent combo when used with Joker Machine FOR 07-10 SOFTAIL, FLT AND 06-10 FXD MODELS clutch master cylinder assemblies 1107-0130 Finned $269.95 •Internals include a hard anodized piston for smooth 1107-0131 Smooth 269.95 action and long life FOR 87-06 BIG TWIN MODELS (EXCEPT 06 DYNA GLIDE) •Includes all mounting hardware, except hydraulic line 1132-0135 Finned design $269.95 •Requires a master cylinder with an 11/16” bore 1132-0136 Smooth design 269.95 •Made in the U.S.A.

PART # CHROME 1107-0178 1107-0180

TRANSMISSION & DRIVELINE

SUG. RETAIL $349.95 349.95

FOR 07-09 FXST, FLST, 06-09 FXD, FXDWG, 07-09 FLHT, FLHR, FLTR, FLHX W/ SIX-SPEED OEM TRANSMISSION PART # CHROME 1107-0175

All part numbers in BOLD MAGENTA are new for 2010.

DESCRIPTION Side cover

SUG. RETAIL $349.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

505


SECTION

8

WINDSHIELDS TOURING 1107-0162

LUGGAGE SEATS & SISSY BARS

1107-0161

202240

HYDRAULIC CLUTCH ACTUATORS •The perfect match for Performance Machine’s Contour master cylinder for optimal clutch action •Aluminum construction with a chrome finish •Requires a master cylinder with an 11/16” bore

HYDRAULIC CLUTCH ACTUATOR

NOTE: Require custom hydraulic lines (not included).

EXHAUST

PART # 1107-0162 1107-0161

DESCRIPTION For 07-10 Softail, FLT and 06-10 FXD (fluted) For 87-06 Big Twin (except 06 Dyna Glide) (smooth)

FUEL/AIR SYSTEMS

SUG. RETAIL $349.95 349.95

1132-0017

ENGINE

202250

•Crafted from billet aluminum with a chrome finish •Installs with OEM bolts; 10mm banjo bolt, banjo washers and bleeder screw included PART # DESCRIPTION SUG. RETAIL •Requires the use of an 11/16” FOR ALL 87-06 BIG TWIN 5-SPEED bore master cylinder MODELS (EXCEPT 06 DYNA GLIDE) (sold separately) 202240 Smooth $275.95 •Hydraulic line not included 202250 Ball-milled 275.95 •Made in the U.S.A.

0610-0020 0613-0189

TRANSMISSION & DRIVELINE HYDRAULIC CLUTCH

STERLING CHROMITE® II HYDRAULIC CLUTCH LINES

MASTER CYLINDERS

GASKETS & SEALS ELECTRICAL LIGHTING

•Chrome die-cast housing with an 11/16” bore •Includes a chrome clamp half, lever and 3/8”-24 banjo bolt •Works with most clutch actuators, uses DOT 5 brake fluid •Cut-down master cylinder is .256” lower for a clean look •PART #1132-0017 matches cut-down brake master cylinders, 1914-4011, 1914-4012 and 1914-4013 •PART #0610-0020 matches brake master cylinders 0610-0002 and 0610-0006 PART # 1132-0017 0610-0020 0613-0189

DESCRIPTION Cut-down hydraulic clutch master cylinder assembly Hydraulic clutch master cylinder assembly Repl. clutch lever for PART #1132-0017

SUG. RETAIL $174.95 166.95 35.95

HANDLEBARS, CONTROLS & MIRRORS CABLES 0610-0213

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

0610-0214

0610-0225

CLUTCH MASTER CYLINDER COVERS •CNC-machined from billet aluminum •Includes mounting hardware •Made in the U.S.A. PART # DESCRIPTION FOR 08-10 SCREAMIN’ EAGLE MODELS 0610-0213 Black 0610-0214 Chrome 0610-0225 Black diamond edge

SUG. RETAIL

PART # 1741-0299 1741-0300 1741-0301 1741-0302 1741-0303 1741-0304 1741-0305 1741-0306 1741-0307

LENGTH 58” 62” 66” 70” 74” 78” 58” 62” 66”

BANJO ANGLE 180° 180° 180° 180° 180° 180° 135° 135° 135°

SUG. RETAIL $87.95 90.95 93.95 96.95 98.95 100.95 87.95 90.95 93.95

PART # 1741-0308 1741-0309 1741-0310 1741-0311 1741-0312 1741-0313 1741-0314 1741-0315 1741-0316

LENGTH 70” 74” 78” 58” 62” 66” 70” 74” 78”

BANJO ANGLE 135° 135° 135° 90° 90° 90° 90° 90° 90°

SUG. RETAIL $96.95 98.95 100.95 87.95 90.95 93.95 96.95 98.95 100.95

$53.95 53.95 69.95

HYDRAULIC CLUTCH HOSE ADAPTER

FRAMES, •CNC-precision-machined steel SUSPENSION •Screws into V-Rod and Big Twin & FENDERS OEM-style hydraulic clutch actuator •Enables any AN-3 brake line to be FOOTRESTS used as a hydraulic clutch line & LICENSE •Made in the U.S.A. DESCRIPTION PLATE FRAMES PART # 1742-0027 Hose adapter TIRES, 1742-0028 Repl. O-ring (5-pk.) TUBES & WHEELS HYDRAULIC CLUTCH HOSE ADAPTER HARDWARE, •Adapts Goodridge universal CHEMICALS brake line to convert it to & TOOLS a clutch line •Works on any Big Twin OEM-style hydraulic clutch actuator COVERS, DESCRIPTION SECURITY PART # Hydraulic clutch hose adapter & GENERAL 1742-0144

506

•Only Sterling Chromite® II uses the patented technology to create an exclusive braid that looks like chrome •Perfectly matches the color and weave of all other Magnum Sterling Chromite II cables and lines •Crystal-clear Teflon® outer jacket offers exceptional protection against scuffing paint or chrome and will never discolor •Bullet-proof Kevlar® inner construction provides extreme highperformance/safety ratings with minimal line expansion •All fittings are highly polished and chrome plated •Available in three banjo angles •Special OEM-style transmission fitting eliminates use of adapters •Replaces all OEM Harley, P&A, and V-Rod hydraulic clutch lines •Exceeds all DOT FMVSS-106 specifications •Made in the U.S.A.

STAINLESS STEEL CLUTCH LINE KITS

SUG. RETAIL $15.95 1.95

SUG. RETAIL $16.95

•Manufactured from the finest materials •-3 stainless steel braided clutch line kits feature a tighter wrap and a higher wire count for superior shifting performance •Clear PVC cover enhances appearance and protects components from abrasion •PTFE liner is compatible with all clutch fluids •Made in the U.S.A. PART # DESCRIPTION FOR 87-06 BIG TWIN MODELS (EXCEPT 06 DYNA GLIDE) 1741-0464 63” 1741-0465 65” 1741-0466 67” 1741-0467 69” 1741-0468 71”

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL

$66.95 66.95 66.95 66.95 66.95

SUG. PART # DESCRIPTION RETAIL FOR 87-06 BIG TWIN MODELS (EXCEPT 06 DYNA GLIDE) (CONT) 1741-0469 73” $66.95 1741-0470 75” 66.95 1741-0471 77” 66.95 1741-0472 79” 66.95


SECTION

8

WINDSHIELDS TOURING 1601-0236

1601-0180

1601-0179

1601-0176

LUGGAGE

1601-0178

SEATS & SISSY BARS 1601-0156

1601-0177

1601-0185

EXHAUST

1601-0175

FUEL/AIR SYSTEMS ENGINE

1601-0154 1601-0181

1601-0172

1601-0183 1601-0174

1601-0170 1601-0171

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1601-0173

1601-0205

LIGHTING

1601-0202

ALL ELECTRIC EASY SHIFT™ KITS

1601-0201

•For speed, comfort and fun •Electronically suspends the ignition system, allowing the transmission to smoothly shift up or down with just the push of a button •Shift up at partial or full throttle and back down at the touch of a button •There is no need to use the foot shifter and the clutch is used only when starting or stopping 0502-0016 •Works for normal street riding or full-throttle shifting •Also a perfect match for male and female riders who own bikes that require a lot of hand strength to pull in the clutch lever •OEM shifting ability is retained after installation •Includes a dual-button handlebar control, a shift cylinder plated with a lustrous chrome finish, bolt-on shift cylinder support bracket and a state-of-the-art control module that sends a quick signal from the handlebar control to the shift cylinder •Also included is the electronic ignition kill module and step-by-step instructions with photos for easy installation •Universal kits also available with dual-button handlebar control to fit 7/8” or 1” diameter handlebars/clip-ons; installation may require purchase of frame tube brackets for shift cylinder mounting (sold separately) •Made in the U.S.A. SUG. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL BOLT-ON KITS BOLT-ON KITS (CONT) 1601-0236 For 08-10 FXCW/C models $915.95 1601-0168 For 05 VRSCSE1 $851.95 1601-0179 For 07-10 FXST/FLST models w/o floorboards 915.95 1601-0172 For 06 VRSCSE2 851.95 1601-0180 For 07-10 FXST/FLST models w/ floorboards 915.95 1601-0170 For 05-07 VRSCR Street Rod 915.95 1601-0176 For 00-06 Softail models w/o floorboards 915.95 1601-0171 For 02-10 V-Rod VRSCA/B/W models 851.95 1601-0177 For 00-06 Softail models w/ floorboards 915.95 1601-0120 For 06-10 XL models 915.95 1601-0178 For 90-99 Softail models w/ floorboards 915.95 1601-0174 For 04-05 XL models 915.95 1601-0156 For 06-10 Dyna models w/ forward controls 915.95 1601-0173 For 94-03 XL models 915.95 1601-0185 For 06-10 Dyna models w/ mid-mount controls 989.95 1601-0205 For Buell 03-10 XB9/XB12 models 915.95 1601-0182 For 03-05 Dyna models w/ forward controls 915.95 UNIVERSAL KITS 1601-0184 For 94-05 Dyna models using 1601-0203 For models w/ 7/8” handlebars 749.95 Küryakyn forward controls PART #1622-0058 915.95 1601-0204 For models w/ 1” handlebars 749.95 1601-0181 For 94-02 Dyna models w/ forward controls 915.95 FRAME TUBE MOUNTS 1601-0183 For 94-05 Dyna models w/ mid-mount controls 915.95 0502-0016 1” dia. mount 47.95 1601-0154 For 07-10 FLT, FLHT, FLHX, FLHR, FLTR, 0502-0017 11/8” dia. mount 47.95 FLHTCUTG models 915.95 0502-0018 11/4” dia. mount 47.95 1601-0175 For 87-06 FLT, FLHT, FLHX, FLHR, FLTR models 915.95 0502-0019 13/8” dia. mount 47.95 1601-0169 For 06-07 VRSCD Night Rod 915.95

All part numbers in BOLD MAGENTA are new for 2010.

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

507


SECTION

8

WINDSHIELDS DYNOJET QUICK SHIFTER (DQS) SENSORS FOR POWER COMMANDER V

TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

•Races are won or lost in fractions of a second •Dynojet’s Quick Shifter (DQS) kit allows full-throttle, clutchless upshifts in racing and performance riding applications •The shift rod pressure/tension sensor kit is a universal sensor that mounts to the shift rod in either a push or pull configuration 1601-0246 •Requires modification of gear-linkage tie-rod •The linear travel sensor kit works with bikes that have no shift rod, or on those the shift rod sensor will not fit •Mount one end to the shift lever and the other to a fixed point on the chassis •Push- or pull-types available with universal mounting kit •Plugs directly into the Power Commander V USB expansion port with no re-wiring required •Power Commander Control Center software lets you set engine dead time during upshifts and minimum rpm for system operation •Made in the U.S.A. NOTE: To order either of the sensors below, you must find the correct direction of movement during an upshift (push or pull). For the shift rod/pressure/ tension sensor, press on the shift lever in the direction of an upshift to see if the rod is pushing or pulling on the clevis on the shift shaft. For the linear travel sensor, also move the shifter for an upshift. If movement is down, a pull sensor is needed. If movement is up, a push sensor is required. PART # DESCRIPTION SUG. RETAIL 1601-0246 Shift rod linear sensor (pull type, includes mounting kit) $276.95 1601-0247 Shift rod linear sensor (push type, includes mounting kit) 276.95

•Full-throttle, clutchless up-shifting is now possible with the Dynojet Quick Shifter (DQS) kit •A fully-programmable PCIII USB/DQS interface combines all shifter functions with the main fuel controller 1601-0043 •Momentarily cutting fuel flow to the injectors shuts down the motor and unloads the transmission, letting you up-shift at full power without touching the throttle or the clutch 1601-0044 •Included software lets you adjust the amount of engine “kill time” during shifts and set minimum engine operating rpm to prevent the system from activating during low-speed riding •Plugs into the USB expansion port, so no cutting or splicing of your bike’s wiring harness is necessary •Kits include shift rod sensor, shifter rod, rod linkage for custom applications, instructions and all software required to activate the DQS through your PCIII USB •Made in the U.S.A. NOTE: All models must have a Power Commander III USB module installed in order to use a Dynojet Quick Shifter kit. Power Commander PCII, PCIII and PCIIIr modules are not compatible with the DQS. PART # DESCRIPTION SUG. RETAIL USB QUICK SHIFTER KITS 1601-0043 For fuel-injected FXST/FLST and touring models $296.95 1601-0044 For 02-07 VRSCA/B models 316.95

TANKS & OIL FILTERS DYNOJET QUICK SHIFTER (DQS) SENSORS USB/USB-EX/V

508

SUG. RETAIL $266.95 266.95

•Module allows any vehicle with four cylinders or less to have quick shifter functionality without a Power Commander •Comes with “coil cap” connectors but caps can be removed and be hardwired in •Easy to install •Provides user adjustable “kill times” for each gear •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1601-0207 Ignition quick shifter $324.95

BRAKES

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

PART # DESCRIPTION IMPERIAL SHIFT ROD SENSORS FOR CUSTOM APPLICATIONS 1601-0045 Tension sensor (pull-type) 1601-0046 Pressure sensor (push-type)

UNIVERSAL IGNITION QUICK SHIFTER

CABLES

DASHES & GAUGES

1601-0046

DYNOJET QUICK SHIFTER KITS

1601-0013

•Races are won or lost in fractions of a second •Dynojet’s Quick Shifter (DQS) kit allows full-throttle, clutchless upshifts in racing and performance riding applications 1601-0014 •The shift rod pressure/tension sensor kit is a universal sensor that mounts to the shift rod in either a push or pull configuration •Requires modification of gear-linkage tie-rod •The linear travel sensor kit works with bikes that have no shift rod, or on those the shift rod sensor will not fit •Mount one end to the shift lever and the other to a fixed point on the chassis •Push or pull-types available with universal mounting kit •Plugs directly into the Power Commander USB expansion port with no re-wiring required •Power Commander Control Center software lets you set engine dead time during upshifts and minimum rpm for system operation

2106-0001

NOTE: To order either of the above sensors, you must find the correct direction of movement during an upshift (push or pull). For the shift rod/ pressure/tension sensor, press on the shift lever in the direction of an upshift to see if the rod is pushing or pulling on the clevis on the shift shaft. For the linear travel sensor, also move the shifter for an upshift. If movement is down, a pull sensor is needed. If movement is up, a push sensor is required. NOTE: Can only be used with Power Commander USB, USB EX or universal quick shifter ignition module (above). PART # 1601-0013 1601-0014 2106-0001

DESCRIPTION Shift rod linear sensor (pull type, includes mounting kit) Shift rod linear sensor (push type, includes mounting kit) Handlebar-mounted shift button (used only when tension or linear sensor cannot be used)

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $276.95 276.95 133.95


SECTION

8

1601-0213

WINDSHIELDS 1601-0212

BILLET SHIFTER LINKAGE RODS

TOURING

•CNC-machined billet aluminum construction •Accept stock rod ends •Choose chrome or black finish •91/4” long •Made in the U.S.A.

LUGGAGE 1601-0234

SEATS & SISSY BARS

PART # DESCRIPTION SUG. RETAIL FOR ALL 86-10 FXST/FLST (EXCEPT 97-99 FLSTS), ALL 86-10 FLT, FLHT, FLHR, FLTR 1601-0212 Round, chrome $144.95 1601-0234 I-beam, chrome 154.95 1601-0213 Round, black 144.95 1601-0235 I-beam, black 154.95

1601-0253

1601-0235

EXHAUST

1601-0254

FUEL/AIR SYSTEMS

1601-0257

ENGINE

1601-0251

SHIFT LINKAGES

TRANSMISSION & DRIVELINE

•CNC machined from billet aluminum •Built-in swivel ends for smooth shifts and a clean, custom look •Made in the U.S.A. FOR 99-10 FLHT/FLHR/FLTR/FLHX MODELS PART # DESCRIPTION FINNED 1601-0249 Black 1601-0250 Chrome 1601-0251 Black diamond-edge DIMPLED 1601-0252 Black 1601-0253 Chrome

SUG. RETAIL $149.95 149.95 199.95 149.95 149.95

FOR 80-98 FLT/FLHT/FLHR, 86-10 FXST/FLST (EXCEPT 97-99 FLSTS) AND 93-02 FXDWG MODELS PART # DESCRIPTION SUG. RETAIL FINNED 1601-0254 Black $149.95 1601-0255 Chrome 149.95 1601-0256 Black diamond-edge 199.95 DIMPLED 1601-0257 Black 149.95 1601-0258 Chrome 149.95

GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1601-0224

CABLES

1811-3001 1601-0113 1601-0114

BRAKES

1811-3008

SHIFT LINKAGE RODS

TANKS & OIL FILTERS

•Machined from billet aluminum with a chrome-plated or polished hard black anodized finish •Stainless steel heim joints at each end for the ultimate in corrosion resistance •Chrome hardware included •Linkage rods for Big Twin models feature 5/16” mounting holds; adjust from 12” to 13” center to center •Made in the U.S.A. PART # FOR BIG TWIN 1601-0113 1601-0224

DESCRIPTION

SUG. RETAIL

Stalker, chrome Stalker, black

$99.95 99.95

PART # DESCRIPTION FOR BIG TWIN (CONT) 1811-3001 Joker 1811-3008 Lightning

SUG. RETAIL $124.95 124.95

BILLET SHIFT LINKAGE

1601-0115

DASHES & GAUGES PART # DESCRIPTION SUG. RETAIL FOR 02-10 V-ROD WITH FORWARD CONTROLS 1601-0114 Stalker, chrome $99.95 1601-0115 Stalker, black 99.95

1601-0086

•Machined from billet aluminum with a chrome finish •All measure 131/8” long •Stainless steel 5/16”-24 studs included •Made in the U.S.A.

1601-0085

NOTE: Rod ends not included (must be purchased separately). PART # DESCRIPTION SUG. RETAIL 1601-0085 Tribal $109.95 1601-0086 Maltese Cross, Flame 109.95 1601-0087 Flame 109.95 1601-0088 Thorn 109.95

1601-0087

All part numbers in BOLD MAGENTA are new for 2010.

1601-0088

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

509


SECTION

8

WINDSHIELDS Diamond ll design

Slotted design

TOURING Twisted design

Hex design

LUGGAGE Ball-milled design Diamond design

SEATS & SISSY BARS EXHAUST

Flame design

Spade design

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

DS-375511

Spiral design

Flag design

LMSL2011

Tribal design

Cross design

GASKETS & SEALS ELECTRICAL

DS-375621

DS-375609

Fireman design

Pow design

LIGHTING

LMSL2013

Full Flame design

HANDLEBARS, STAINLESS STEEL SHIFT LINKAGE CONTROLS •Simple two-bolt mounting design linkage and a stainless steel transmission lever cover that can be installed in minutes without removing & MIRRORS •Includes the transmission lever itself CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

•Smaller-diameter, economical version available •Each linkage can be adjusted up to 1” •Measurements are eye center to eye center with linkages fully collapsed •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 121/8” SHIFT LINKAGE FOR 86-10 FLT AND 86-10 FXST, FLST (EXCEPT 97-99 FLSTS) DS-375501 Diamond II design $149.95 DS-375502 Twisted design 99.95 DS-375504 Ball-milled design 149.95 DS-375505 Slotted design 149.95 LMGSL2006 Diamond design 119.95 DS-375610 Hex design 119.95 LMSL2011 Small dia. round Smoothie design 83.95 1601-0051 Spade design 149.95 1601-0052 Flame design 149.95 1601-0053 Flag design 149.95 1601-0054 Spiral design 149.95 1601-0055 Cross design 149.95 1601-0056 Tribal design 149.95 1601-0057 POW design 149.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, LINKAGES CHEMICALS SHIFT •Beautiful shift linkages are carved from 6061 T-6 & TOOLS billet and given a brilliant chrome or powdercoat black finish COVERS, •Add a real touch of style to forward controls SECURITY •All are 12” L with 5/16” -24 ends & GENERAL •Made in the U.S.A.

510

PART # DESCRIPTION SUG. RETAIL 121/8” SHIFT LINKAGE FOR 86-10 FLT AND 86-10 FXST, FLST (EXCEPT 97-99 FLSTS) (CONT) 1601-0058 Fireman design $149.95 1601-0129 Full flame design 169.95 121/2” SHIFT LINKAGE FOR 97-99 FLSTS DS-375511 Smoothie design 99.95 131/8” SHIFT LINKAGE FOR 93-05 FXDWG MODELS DS-375507 Twisted design 99.95 DS-375510 Slotted design 149.95 LMGSL2008 Diamond design 119.95 LMSL2012 Small dia. round Smoothie design 83.95 1601-0059 Spade design 149.95 1601-0060 Flame design 149.95 1601-0062 Spiral design 149.95 1601-0063 Cross design 149.95

PART # DESCRIPTION SUG. RETAIL 131/8” SHIFT LINKAGE FOR 93-05 FXDWG MODELS (CONT) 1601-0064 Tribal design $149.95 1601-0065 POW design 149.95 47/8” SHIFT LINKAGE FOR 91-05 DYNA GLIDE DS-375621 Smoothie design 83.95 4” SHIFT LINKAGE FOR 84-94 FXR DS-375609 Smoothie design 83.95 FOR EXTENDED FORWARD CONTROLS LMSL2013 Small dia. round Smoothie design; 83.95 1413/16” long LMSL2014 Small dia. round Smoothie design; 83.95 1513/16” long

1601-0068

1601-0069 PART # 1601-0068 1601-0069

DESCRIPTION Holy Landry

1601-0237

SUG. RETAIL $169.95 169.95

All part numbers in BOLD MAGENTA are new for 2010.

PART # 1601-0237 1601-0238

1601-00238 DESCRIPTION SUG. RETAIL Super Bling $199.95 Super Bling, black 199.95


SECTION

8

WINDSHIELDS TOURING 1601-0209

1601-0210

LUGGAGE TRAIN ROD SHIFT LINKAGE •Sleek shape is reminiscent of the streamlined train engines of the 30s and 40s •Integrated amber LEDs add a modern highlight •Can be easily wired into the motorcycle’s run circuit •Measures 121/8” long PART # 1601-0098

DESCRIPTION For all FXST/FLST (except 97-99 FLSTS), all FLT, FLHT, FLHR, FLTR and 93-02 FXDWG

SEATS & SISSY BARS EXHAUST

SUG. RETAIL $136.95

1601-0211

FUEL/AIR SYSTEMS ENGINE

SHIFT LINKAGES •Stylish additions that really stand out •Linkages are chrome steel with chrome-plated ABS accents •Measures 121/8” long •Sold each

GIRDER SHIFT LINKAGE •Machined from billet aluminum, then chrome plated for style •Beautiful addition to your bike •Measure 121/8” long PART # DESCRIPTION 1601-0099 For all FXST/FLST (except 97-99 FLSTS), all FLT, FLHT, FLHR, FLTR and 93-02 FXDWG

SUG. RETAIL $104.95

PART # DESCRIPTION FOR 86-10 FXST/FLST (EXCEPT 97-99 FLSTS), 93-02 FXDWG, 84-10 TOURING MODELS 1601-0209 Wild Boar 1601-0210 Widow 1601-0211 Zombie

TRANSMISSION & DRIVELINE SUG. RETAIL

$104.95 104.95 104.95

GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

w/chrome lock nuts

w/red lock nuts

w/blue lock nuts

BRAKES

CUSTOM EXTRUDED SHIFT LINKAGE •Bold, massive looks •Threaded inserts at each end and long skirted lock nuts provide a wide range of adjustment •Heavy-duty universal joints ensure smooth shifting •Includes a pair of red, blue and chrome lock PART # DESCRIPTION nuts for a personalized appearance 1601-0100 For all Softail (except 97-99 FLSTS), all FLT, FLHT, FLHR, FLTR, and 93-02 FXDWG •Measure 121/8” long

DS-375587

SUG. RETAIL $79.95

DS-373584

DS-375586

DS-375588

SHIFTER RODS •Chrome-plated billet aluminum shifter rods •Available in six unique designs •Made in the U.S.A.

DS-375585

PART # DESCRIPTION FOR 86-98 FLT AND 86-10 FXST/FLST (EXCEPT 97-99 FLSTS) DS-375587 Round grooved DS-375586 See-through DS-373584 Diamond DS-375588 Flat grooved

DS-375589 SUG. RETAIL $74.95 78.95 94.95 78.95

PART # DESCRIPTION SUG. RETAIL FOR 86-98 FLT AND 86-10 FXST/FLST (EXCEPT 97-99 FLSTS) (CONT) DS-375585 V-style $94.95 DS-375589 Round grooved for Ness-Tech® or JayBrake forward controls 104.95

All part numbers in BOLD MAGENTA are new for 2010.

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

511


SECTION

8

WINDSHIELDS

1601-0259

DS-325402C

TOURING

1601-0049 DS-325412C 1601-0050

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

GEAR SHIFT LINKAGE RODS SHIFT LINKAGE

•Billet aluminum gear shift linkages come in two styles: cutout and ball-milled •Chrome finish •Available in standard 93/16” length (as measured without the rod ends) •Made in the U.S.A. PART # DESCRIPTION FOR 86-98 FLT AND 86-10 FXST/FLST (EXCEPT 97-99 FLSTS) DS-325402C Ball-milled DS-325412C Cut-out

SUG. RETAIL $61.95 61.95

•Chrome-plated billet aluminum •Ends are threaded to accept most 5/16” rod ends •Available in three lengths •Made in the U.S.A. PART # DESCRIPTION 1601-0259 9.5” 1601-0049 10.5” 1601-0050 12.5”

SUG. RETAIL $79.95 81.95 81.95

1601-0240 1601-0105

ENGINE TRANSMISSION & DRIVELINE SHIFTER LINKAGE

GASKETS & SEALS

•Chrome-plated steel rod and ends •Feature a custom round heim joint end with 5/16” hole and a ball joint end with 5/16”-24 stud •Rod lengths are measured from the center of the hole to the center of the stud with the adjusters collapsed •Sold each PART # DESCRIPTION SUG. RETAIL 1601-0239 121/2” for 86-10 FXST, FLST (except 97-99 FLSTS) $31.95 1601-0240 141/2” for custom applications 34.95 1 34.95 1601-0241 15 /2” for custom applications

1601-0111

ELECTRICAL SHIFT LINKAGES

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

•Constructed of polished, chrome-plated die-cast aluminum •Lengths measured without studs installed 5 • /16” fine thread studs allow attachment to most •Includes mounting hardware SUG. PART # DESCRIPTION RETAIL PART # FLAME SKULL 1601-0104 9” $64.95 1601-0110 1601-0105 10.2” 64.95 1601-0111 1601-0106 11.8” 64.95 1601-0112

shift link ends

DESCRIPTION

SUG. RETAIL

9” 10.2” 11.8”

$64.95 64.95 64.95

1811-2124

1811-2122

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

TRANSMISSION SHIFTER ROD LEVERS FXR SHIFTER LINKAGE

FRAMES, SUSPENSION PART # DESCRIPTION & FENDERS DS-325512 For 84-94, 99 FXR; repl. OEM #33728-82A FOOTRESTS 1602-0167 & LICENSE PLATE FRAMES TIRES, TUBES & BILLET SHIFTER ROD LEVERS WHEELS •CNC-machined billet aluminum •Contemporary Battistinis styling HARDWARE, •Choose from chrome or black finish each CHEMICALS •Sold •Made in the U.S.A. & TOOLS PART # DESCRIPTION COVERS, FOR 86-10 FLT/FLHT MODELS Chrome SECURITY 1602-0167 Black & GENERAL 1602-0168

•Chrome drop forged steel •Fits Big Twin OEM and aftermarket 5- or 6-speed transmissions

•Chrome-plated for lasting beauty •Rod ends included

512

SUG. RETAIL $19.95

PART # 1811-2124 1811-2122

DESCRIPTION For 97-10 models; repl. OEM #33849-97 For 85-96 models; repl. OEM #33715-85

1602-0168 SUG. RETAIL $114.95 114.95

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $27.95 22.95


SECTION ROD ENDS

•Steel construction •Made in the U.S.A. PART # DESCRIPTION DS-273130 For 84-96 Big Twin models w/ 5-speed or 6-speed transmissions; repl. OEM #33715-85

SUG. RETAIL $48.95

PART # 1601-0116 1601-0124

TOURING

DESCRIPTION Stainless steel rod end Chrome rod end

SUG. RETAIL $24.95 19.95

•Tightens up loose shifting on all FXST/FLST models •Sold each DESCRIPTION For 86-08 Softail; repl. OEM #33729-82

SUG. RETAIL $9.95

•Chrome-plated rod ends •Each rod end has female 5/16”-24 right-hand threads •Sold as a pair •Made in the U.S.A.

EXHAUST PART # DS-243496

DESCRIPTION Shifter rod ends

SUG. RETAIL $37.95

GREASEABLE SHIFTER SHAFT DS-325511

DS-325510

SELF-ALIGNING CHROME ROD ENDS •Heim-style rod ends compensate for imperfect alignment; up to 28° off center •Internally threaded with 5/16”-24 threads •Self-lubricating brass ball socket available with 5/16”-24 integral stud or 5/16” hole •Great for using as shifter or brake rod ends PART # DS-325510 DS-325511

DESCRIPTION Rod end w/ hole (ea.) Rod end w/ stud (ea.)

SUG. RETAIL $15.95 17.95

•Shift linkage will operate smoother and with less resistance after this simple installation •Designed to prevent shift linkage drag and lockup for OEM models without grease fitting on primary case •Will accept any stock or aftermarket shift lever that fits the stock shaft •Manufactured from stainless steel with the exposed end polished so it will match the chrome shift lever •Can be installed in about 30 minutes using simple hand tools •Made in the U.S.A. PART # 1601-0225

•Hardened steel with splines; exact replacements for OEM parts PART # DS-530610

DESCRIPTION For 90-06 FLST (includes two O-rings); repl. OEM #33668-90B

SUG. RETAIL $22.95

TRANSMISSION & DRIVELINE GASKETS & SEALS

DESCRIPTION SUG. RETAIL For 01-10 FL models w/o grease fitting on primary case and all 85-00 FL models w/ grease fitting $72.95

ELECTRICAL LIGHTING

•Made from rubber to seal around shaft •Replaces OEM #7078 •Sold in 10-pack PART # 0935-0129

FUEL/AIR SYSTEMS ENGINE

SHIFTER SHAFT SPACER CHROME SHIFTER SHAFTS

LUGGAGE SEATS & SISSY BARS

SHIFT LINKAGE ROD ENDS

CHROME SHIFTER BALL JOINT

PART # DS-194226

WINDSHIELDS

•Stainless steel and chrome rod ends; work as replacement end for Landmark linkages or custom applications 5 • /16” thread •Sold each •Made in the U.S.A.

CHROME SHIFTER ROD LEVER

8

DESCRIPTION For 06-10 Dyna Glide

SUG. RETAIL $1.95

HANDLEBARS, CONTROLS & MIRRORS CABLES

1602-0003

BRAKES

SHIFT LEVER SHAFT BUSHINGS •Sold to dealer in packs of 10 PART # DS-530611

DESCRIPTION For 86-99 FLST; repl. OEM #33708-94

SUG. RETAIL $3.95 (ea.)

SHIFT ROD EXTENSIONS

SHIFTER LEVER SHROUDS

•Chromed steel extensions available in 1”, 2”, 3” or 4” •Extend any OEM or custom shift rod with 5/16”-24 threads •Made in the U.S.A.

•Fits over the shifter rod lever •Available with polished stainless steel or chrome finish •Made in the U.S.A. PART # FOR 85-06 BIG TWIN DS-111729 1601-0123

DESCRIPTION

SUG. RETAIL

Polished stainless steel Chrome

$25.95 19.95

PART # 1601-0232 1601-0003 1601-0004 1601-0233

DESCRIPTION 1” extension 2” extension 3” extension 4” extension

SUG. RETAIL $21.95 21.95 21.95 24.95

1601-0226 1602-0147

FRONT SHIFT ARM ACCENTS CHROME SHIFTER LEVER COVER •One-piece shifter lever cover fits over the existing shifter rod lever •Looks as good from the front as it does from the rear PART # DS-373626

DESCRIPTION For 85-06 Big Twin

SUG. RETAIL $17.95

•Brighten up the stock shifter arm with this easily installed cover 1602-0148 •Sold each PART # DESCRIPTION FOR 82-10 FLHT, FLHR, FLTR, FLHX 1602-0147 Silhouette 1602-0148 Deco (for use w/o Küryakyn front inner primary extension cover) 1602-0149 Deco (for use w/ Küryakyn front inner primary extension cover) 1601-0226 Zombie

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $49.95 29.95 29.95 49.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

513


SECTION

8

WINDSHIELDS TOURING

1602-0245

1602-0246

1602-0248

HEEL SHIFT ELIMINATOR

LUGGAGE SEATS & SISSY BARS EXHAUST

•CNC-machined from billet aluminum •Used when eliminating the rear (heel) shift lever •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 84-10 FLHT, FLHR, FLTR, FLHX AND 86-06 FLST 1602-0245 Black $39.95 1602-0246 Chrome 39.95 1602-0248 Black diamond-edge 48.95

SHIFTER SHAFT PRIMARY PLUG

HEEL SHIFT LEVER ELIMINATOR •Eliminates the heel (rear) shift lever allowing for more room on the floorboard •Made of billet aluminum and polished •Easy to install •Made in the U.S.A PART # 1601-0208

DESCRIPTION For FLT, FLHT, FLHR, FLHX and FLTR models

SUG. RETAIL $29.95

•Used when adding forward controls to FXD, FXR models and eliminating the mid shifter shaft •Plugs holes in inner primary cover for a finished look •Anodized billet aluminum, complete with O-rings, bolt and locking tab •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1107-0073 Shifter shaft plug $33.95

TOP HAT SHIFTER SHAFT COVER

FUEL/AIR SYSTEMS ENGINE

1602-0154

1602-0155

1602-0153

1602-0152

•Chrome-plated aluminum •Covers and protects shifter shaft end when changing shifter location •Attaches with included adhesive •Made in the U.S.A. PART # DESCRIPTION DS-243627 For 84-10 Big Twin

SUG. RETAIL $25.95

SHIFTER SHAFT SUPPORT COVERS

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

ELIMINATOR SHIFTER SPACERS

•Chrome-plated aluminum •Covers the shift lever shaft support located on the footrest/kickstand mount bracket •Attaches with included adhesive •Made in the U.S.A. PART # DESCRIPTION FOR 04-06 FLST 1602-0154 Warrior 1602-0155 Nasty FOR 03-06 FLSTF 1602-0152 Warrior 1602-0153 Nasty

SUG. RETAIL $47.95 47.95 43.95 43.95

•Chrome CNC-machined billet T-6 aluminum •Fills the gap on the shifter shaft when eliminating the heel shifter •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 82-06 FLT/FLHT 1811-0370 Plain $26.95 1602-0150 Warrior 25.95

1811-0370

1602-0150

1602-0151

PART # DESCRIPTION SUG. RETAIL FOR 82-06 FLT/FLHT (CONT) 1602-0151 Nasty $25.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

DOMED SHIFTER SHAFT COVER SHIFTER SPLINE COVER •Simple, clean solution of how to cover the shifter spline if you remove the heel shift lever •Cover measures 1/2” i.d. PART # DESCRIPTION SUG. RETAIL 1602-0077 Shifter spline cover $12.95

•Cover the shaft end when the heel shift is removed •Fabricated from 6061 aluminum •Hand-polished and chrome-plated •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1110-0014 For 84-10 FLST/ FLT/FLHT/FLHR $22.95

1602-0138

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

514

SHIFTER SHAFT CAP •Die-cast aluminum with a polished chrome finish •Fits over the end of the shifter shaft on FL models when removing heel shifter •Also fits FXD/FXR mid-control models fitted with forward controls •Mounts to shifter shaft with a setscrew PART # DESCRIPTION SUG. RETAIL 1601-0015 Shifter shaft cap $8.95

1602-0140

SHIFTERS •Classic shifters are made of billet aluminum and come with stainless steel shift rod and all necessary hardware, including sealed roller bearing assembly; fit 5- and 6-speed transmissions in custom applications •Jockey shifter is made of steel tubing and features a chrome finish •Made in the U.S.A. NOTE: Classic shifters bolt directly to motor mount PART #s DS-243607, 1902-0017, 1902-0018, DS-330021, DS-330022, DS-330025, PMM-1 and PMM-3. PART # DESCRIPTION FOR CUSTOM APPLICATIONS 1602-0138 Classic drilled, chrome 1602-0139 Classic drilled, black

SUG. RETAIL $254.95 254.95

PART # DESCRIPTION FOR CUSTOM APPLICATIONS (CONT) 1602-0140 Classic smooth, chrome 1602-0141 Classic smooth, black

1602-0142 SUG. RETAIL $254.95 254.95

PART # DESCRIPTION SUG. RETAIL FOR CUSTOM APPLICATIONS (CONT) 1602-0142 Jockey hammered, chrome $132.95

SHIFTER BALLS

1602-0143

1602-0144

•Made from high-quality casting resin with colors that will not wear or scratch off •21/8” diameter PART # DESCRIPTION •Solid brass fittings with 1/2”-20 threads 1602-0143 8-ball, black •Come with 3/8”-16 brass adapter 8-ball, white •For any shifter utilizing either of these fitting sizes 1602-0144 1602-0146 Abstract, red •Made in the U.S.A.

1602-0146 All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $71.95 71.95 71.95


SECTION

8

WINDSHIELDS JOCKEY SHIFT LEVER

HEAVY-DUTY SHIFTER LEVER BRACKET •Heavy-duty/reinforced chrome-plated shifter lever bracket comes with lever bushing and a grease zerk •Sold each PART # DESCRIPTION DS-530609 For 86-99 FLST; repl. OEM #33630-90A

SUG. RETAIL $33.95

•Gloss black lever with chrome handle •Can be used with most jockey shifts to add a custom look •Includes installation hardware •Made in the U.S.A. PART # DESCRIPTION 7807-0111 Jockey shift lever

TOURING SUG. RETAIL $53.95

1602-0279

SEATS & SISSY BARS 1602-0280

•Carved from billet aluminum •Available in Deep Cut, Retro and Radius styles •Shifter pegs included except with Radius style; Radius-style allows the use of any shifter peg DESCRIPTION SUG. RETAIL AND 97-10 FLT Radius $249.95 Deep Cut, chrome 324.95

EXHAUST

CONTOUR CHROME SHIFT LEVER AND SPACER

HEEL/TOE SHIFTER LEVERS

PART # FOR 00-10 FLST 1602-0278 1602-0279

1602-0281 PART # FOR 00-10 FLST 1602-0280 1602-0281

DESCRIPTION SUG. RETAIL AND 97-10 FLT (CONT) Deep Cut, black $324.95 Retro, chrome 299.95

•Machined aluminum construction with a chrome finish •Includes aluminum spacer if using shifter only •Made in the U.S.A. PART # 1602-0273

DESCRIPTION For 84-10 FLHT/FLHR/ FLHX, 00-10 FLST

SUG. RETAIL

GASKETS & SEALS

1602-0170 1602-0172 SUG. RETAIL $199.95 199.99

PART # DESCRIPTION FOR 86-10 FLST, 84-10 FLT/FLHT/FLHR/FLTR 1602-0171 Toe/heel set, chrome 1602-0172 Toe/heel set, black

$339.95 339.95

DS-273607

•21/4”

longer than stock for increased leverage •Accept stock-style shifter peg •Available in a die-cast billet-style or solid steel-style •Sold each •Made in the U.S.A.

•Contemporary styling •Chrome-plated 6061 T-6 billet aluminum construction •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL DS-273913 For all FXST/FLST, Dyna Glide and FXR models $129.95

PART # STEEL DS-273606 DS-273608

DESCRIPTION

SUG. RETAIL

For 84-06 FLHT/FLT For 86-06 FXST/FLST

$82.95 82.95

GIRDER SHIFT LEVERS

PART # BILLET DS-273607 DS-273609

DS-273608

DESCRIPTION For 84-06 FLHT/FLT For 86-06 FXST/FLST

$88.95 88.95

PART # 1110-0037 1110-0038 DS-530612 DS-273921

DASHES & GAUGES

1603-0002 SUG. RETAIL $79.95 84.95

DS-273916

DS-530612 DS-273924

•High-quality, chrome-plated levers are excellent OEM replacements 1110-0037 •Strong, die-cast construction is reinforced for extra strength APPLICATION For 07-10 FXST/FXD For 07-10 FLST, FLHT, FLHX, FLTR For 86-06 FLST, 01-06 FLHT, FLHR, FLTR (heel and toe position), 84-00 FLT (heel position) For 85 FX, 86-06 FXST and 91-05 Dyna Glide

REPL. OEM # 34546-90B 33895-82C 33895-82/82B 34564-74B, 34564-90A

DS-273921 DS-273925 SUG. RETAIL $23.95 23.95 17.95 19.95

PART # DS-273916 DS-273915 1602-0137 DS-273924 DS-273925

APPLICATION For 85-86 FXWG, 85-86 FLHS, 84-85 FXST w/ fine spline For 84-94, 99 FXR, FXRS, FXRT For 06-10 XL (w/o forward controls) For 91-05 XL 883, 1200 For 86-90 XL 883, 1100, 1200

All part numbers in BOLD MAGENTA are new for 2010.

BRAKES TANKS & OIL FILTERS

NOTE: Use of PART #1603-0002 on FLST or FLT models requires Küryakyn heel shift eliminator, sold separately. PART # DESCRIPTION DS-273928 Standard length for 86-10 FXST, 91-10 Dyna Glide, FXR models and Kuryakyn forward controls 1603-0002 Extended length for 84-10 FLT, 86-06 FLST models

DS-273915

HANDLEBARS, CONTROLS & MIRRORS

SUG. RETAIL

DS-273928

1110-0038

LIGHTING

CABLES

•Unique design offers increased leverage and more comfort •Styling matches the Magnum mirrors and stirrups •Extended lever is 13/4” longer than stock •Chrome finish

CHROME SHIFT LEVER

ELECTRICAL

SUG. RETAIL

EXTENDED CHROME SHIFTER LEVERS CHROME BILLET SHIFT LEVER

ENGINE TRANSMISSION & DRIVELINE

1602-0169

•CNC-machined billet aluminum •Contemporary Battistinis styling •Available in single or heel/toe sets •Choose from chrome or black finish •Includes shifter pegs •Made in the U.S.A. PART # DESCRIPTION FOR 86-10 FXST, 93-08 FXDWG 1602-0169 Single, chrome 1602-0170 Single, black

FUEL/AIR SYSTEMS

$89.95

1602-0171

BILLET SHIFTER LEVERS

LUGGAGE

REPL. OEM #

SUG. RETAIL

33664-81 34599-81 34660-04A 34606-90, 34615-94 34606-86

$19.95 21.95 27.95 19.95 17.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

515


SECTION

8

WINDSHIELDS TOURING REAR DRIVE BELTS

LUGGAGE SEATS & SISSY BARS

•Carbon fiber reinforced Goodyear engineered Falcon SPC™ belts offer up to 33 percent more tensile strength than conventional aramid reinforced belts •High-temperature rubber compound offers excellent flex and long service life •Fabric reinforced belt tooth surfaces improve wear resistance •Durable material construction is designed to withstand belt-penetrating debris without breaking

1204-0046

NOTE: No warranty claims are made or implied.

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

SUG. PART # DESCRIPTION RETAIL 11/2” BELTS 1204-0035 125-tooth belt for custom applications $189.95 1204-0037 126-tooth belt for 80-86 FX, 82-84 FLH (domestic); repl. OEM #40003-79 189.95 1204-0039 127-tooth belt for 89-92 FXST, FLST (international); repl OEM #40010-89 174.95 1204-0041 128-tooth belt for 93 FXST, FLST (domestic), 91-93 FXD, FXDWG (international); repl. OEM #40012-90 189.95 1204-0043 130-tooth belt for95-99 FXST, FLST (domestic), 94 FXST, FLST, 94-95 FXD, FXDWG (Swiss); repl. OEM #40017-94 174.95 1204-0046 132-tooth belt for 86-92, 94 FXST, FLST (domestic), 189.95 89-93 FLT, FXR (international); repl. OEM #40023-86 1204-0050 133-tooth belt for 91-01 FXD, FXDWG (domestic), 94-95 FLT (Swiss); repl. OEM #40015-90 199.95 1204-0054 135-tooth belt for custom applications 174.95 1204-0058 136-tooth belt for 85-96 FLT, FLHT, 85-94 FXR (domestic); repl. OEM #40001-85 189.95 1204-0062 139-tooth belt for 97-03 FLT, FLHT, FLHR, FLTR (domestic); repl. OEM #40024-97 199.95 11/8” BELTS 1204-0036 125-tooth belt for custom applications 169.95 1204-0038 126-tooth belt for custom applications 169.95 1204-0040 127-tooth belt for custom applications 169.95 1204-0042 128-tooth belt for 91-03 XL, 94-02 Buell (except Blast) (domestic/international); repl OEM #40022-91 169.95 1204-0044 130-tooth belt for 07-10 FXD, FXDWG (Japan); repl. OEM #40048-07 169.95 1204-0047 132-tooth belt for 06 FXD, FXDWG (international), repl. OEM #40594-06 199.95 1204-0051 133-tooth belt for 00-06 FXD/T. 02-06 FXD/FXDWG (domestic); repl. OEM #40015-00 169.95

SUG. PART # DESCRIPTION RETAIL 11/8” BELTS (CONT) 1204-0055 135-tooth belt for 00-06 FLST, 00-05 FXST (domestic/international); repl OEM #40307-00 $174.95 1204-0059 136-tooth belt for 04-06 XL 883 (domestic/international); repl. OEM #40570-04 169.95 1204-0063 139-tooth belt for04-06 FLHT, FLHR, FLTR (domestic/international); repl. OEM #40024-04 199.95 1” BELTS 1204-0045 130-tooth belt for custom applications 149.95 1204-0048 132-tooth belt for custom applications 199.95 1204-0052 133-tooth belt for 07-10 FLST/C/N, FLSTSC, FXSTD, FXCW/C (domestic/international); repl. OEM #40058-07 199.95 1204-0056 135-tooth belt for custom applications 149.95 1204-0060 136-tooth belt for 07-10 XL 883 (domestic/ international); repl. OEM #40371-07 169.95 1204-0060 136-tooth belt for 07 FLHT, FLHR, FLHX, FLTR (Japan); repl. OEM #40056-07 169.95 1204-0061 137-tooth belt for 07-08 FLHT/R/X, FLTR (domestic); repl. OEM #40024-07 169.95 1204-0061 137-tooth belt for 07-10 XL 1200 (domestic/international); repl. OEM #40591-07 169.95 1204-0064 139-tooth belt for 01-08 Buell Blast (domestic); repl. OEM #G0500.01A7 199.95 20MM BELTS 1204-0049 132-tooth belt for 07-10 FXST, FLST, FXCW (Japan); repl. OEM #40074-07 199.95 1204-0053 133-tooth belt for 07-10 FXST/B/C. FLSTF, FLSTSB (domestic/international); repl. OEM #40073-07 199.95 1204-0057 135-tooth belt for 06 FXST (domestic/international); repl. OEM 40655-06 169.95

BRAKES PANTHER REAR DRIVE BELTS

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

516

•Improved RPP™ Panther® Design •Feature ULTRA-CORD™ tensile members and the Able™ compound •ULTRA-CORD doesn’t stretch or shrink, thus reducing the strain on bearings, shafts, and other drive components •ULTRA-CORD resists degradation and moisture to give you longer belt life •The Able compound, an advanced polymer, resists tooth shear, adding to the belt’s stability •The rugged parabolic tooth profile reduces noise and offers drive efficiency up to 98% •Made in the U.S.A.

DS-197001

NOTE: No warranty claims are made or implied. PART # DESCRIPTION 11/2” BELTS MBR-139 139-tooth belt for 97-03 FL models; repl. OEM #40024-97 DS-197001 132-tooth belt for 87-92 and 94 Softail models w/ 70-tooth pulley; repl. OEM #40023-86 DS-197002 136-tooth belt for all 5-speed Big Twin models including 85-94 FXR, 85-96 FLT models except Softail and Dyna Glide models; repl. OEM #40001-85 DS-197003 126-tooth belt for all 4-speed Big Twin models; repl. OEM #40003-79 DS-197004 130-tooth belt for 95-99 Softail models w/ 65-tooth pulley; repl. OEM #40017-94 DS-197005 133-tooth belt for 91-99 Dyna Glide models; repl. OEM #40015-90

SUG. RETAIL

$240.95 225.95

232.95 219.95 222.95

PART # DESCRIPTION 11/2” BELTS (CONT) DS-197006 128-tooth belt for Big Twin models w/ 61-tooth pulleys, 93 Softail, 88-93 international models; repl. OEM #40012-90 1 1 /8” BELTS MBR-135 135-tooth belt for 00-06 Softail models (except 06 FXST); repl. OEM #40307-00 DS-197007 125-tooth belt for 91-96 XL international models w/ 55-tooth rear pulleys; repl. OEM #40038-91 DS-197008 128-tooth belt for 91-03 XL models w/ 61-tooth rear pulleys; repl. OEM #40022-91 13/8” BELTS 2302-0001 150 tooth belt for 02-03 V-Rod; repl. OEM #40027-01

211.95

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL

$208.95

178.95 187.95 194.95 231.95


SECTION

8

WINDSHIELDS TOURING LUGGAGE

REAR DRIVE BELTS •Premium high-torque polyurethane synchronous belts •Feature aramid tensile cords with distinctive top ribbing like OEM •Will also fit Karata® rear drive belt systems •11/8” Big Twin narrow belts are for wide tire applications/conversions •Made in the U.S.A. NOTE: No warranty claims are made or implied. PART # DESCRIPTION SUG. RETAIL 11/2” BELTS DS-197096 139-tooth belt for 97-03 FLT, FLTC, FLHTC, FLHR and FLTR models; repl. OEM #40024-97 $209.95 DS-197097 132-tooth belt for 87-94 Softail models w/ 70-tooth pulley; repl. OEM #40023-86 184.95 DS-197604 136-tooth belt for all 5-speed Big Twin models including 85-94 FXR and 85-96 FLT models w/ 70-tooth pulley (except Softail and Dyna Glide models); repl. OEM #40001-85 184.95 DS-197098 126-tooth belt for 80-86 FXB, FXSB, FXWG and 82-84 FL w/ 70-tooth pulley; repl. OEM #40003-79 184.95 DS-197099 130-tooth belt for 95-99 Softail models w/ 65-tooth pulleys; repl. OEM #40017-94 184.95 DS-197601 133-tooth belt for 91-99 Dyna-Glide models w/ 70-tooth pulley; repl. OEM #40015-90 184.95 DS-197602 128-tooth belt for Big Twin models w/ 61-tooth pulleys, 93 Softail, 88-93 International models; repl. OEM #40012-90 184.95 2302-5003 125-tooth belt, for custom applications 184.95 2302-5004 127-tooth belt, for custom applications 184.95 2302-5005 135-tooth belt, for custom applications 184.95

DS-197086

SEATS & SISSY BARS

PART # DESCRIPTION SUG. RETAIL 11/8” BELTS FOR CUSTOM 11/8” PULLEYS ONLY DS-197086 132-tooth belt for 87-94 Softail models w/ 70-tooth pulley $177.95 DS-197606 139-tooth belt for 97-03 FLT, FLTC, FLHTC, FLHR and FHTR models w/ 70T pulley 187.95 DS-197087 136-tooth belt for 85-94 FXR and 85-96 FLT models w/ 70-tooth pulley (except Softail and Dyna Glide models) 177.95 DS-197088 126-tooth belt for 80-86 FXB, FXSB, FXWG and 82-84 FL w/ 70-tooth pulley 177.95 DS-197089 130-tooth belt for 95-06 Softail models w/ 65-tooth pulleys 177.95 DS-197090 133-tooth belt for 91-06 Dyna-Glide models w/ 70-tooth pulley 177.95 DS-197091 128-tooth belt for Big Twin models w/ 61-tooth pulleys, 93 Softail, 88-93 International models 177.95 DS-197603 125-tooth belt for 91-03 XL international models w/ 55-tooth pulley 177.95

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

DID 530 V SERIES O-RING CHAIN •D.I.D’s finest high-performance O-ring chain •Solid bushings for longest possible wear •Reinforced rollers for greatest impact resistance •Pre-stretched at factory •Average tensile strength 9,600 lb. •Unlimited mileage warranty •Master link included PART # DESCRIPTION SUG. RETAIL D18-530V-100 100 links $131.95 D18-530V-102 102 links 134.95 D18-530V-104 104 links 136.95 D18-530V-106 106 links 139.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS PART # D18-530V-108 D18-530V-110 D18-530V-112 D18-530V-114

DESCRIPTION 108 links 110 links 112 links 114 links

SUG. RETAIL $141.95 144.95 147.95 149.95

PART # D18-530V-118 D18-530V-120 D18-3117 D18-3118

DESCRIPTION SUG. RETAIL 118 links $155.95 120 links 157.95 25 ft. 630.95 Rivet connecting link 9.95

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

DIAMOND DRIVE CHAIN •Standard and XDL-style Diamond chain is OEM on many motorcycles •Oil-impregnated bushing in XDL chain supplies lubrication to the pin bushing area •Most popular Harley lengths shown below •Made in the U.S.A. PART # 530 STD. DS-192014 DS-192016 DS-192018 DS-192020 DS-192022 DS-192031

DESCRIPTION 530 530 530 530 530 530

x x x x x x

SUG. RETAIL

102 104 106 108 110 120

$75.95 77.95 78.95 80.95 81.95 89.95

PART # DESCRIPTION DIAMOND CLIP-STYLE CONNECTING LINKS DS-192152 530 std. conn. link (ea.)

SUG. RETAIL $2.95

PART # 530 XDL DS-192214 DS-192216 DS-192218 DS-192220 DS-192222 DS-192231

DESCRIPTION 530 530 530 530 530 530

x x x x x x

102 104 106 108 110 120

PART # DESCRIPTION DIAMOND CLIP-STYLE CONNECTING LINKS (CONT) DS-192252 530 XDL conn. link (ea.)

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $107.95 109.95 111.95 113.95 115.95 129.95 SUG. RETAIL $2.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

517


SECTION

8

WINDSHIELDS DS-192400

TOURING DS-192410

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

O-RING DRIVE CHAIN •Features four-point pin riveting, solid bushings and rollers, and tough O-ring seals to lock in factory K3 lube and lock out grit •Average tensile strength: 9,100 lb. •Chrome chain features tough chrome plating on sideplates •Rivet-type connection link included PART # DESCRIPTION SUG. RETAIL NATURAL DS-192400 530 x 102 links $81.95 DS-192401 530 x 104 links 83.95 DS-192402 530 x 106 links 84.95 DS-192403 530 x 110 links 87.95 DS-192404 530 x 112 links 89.95 DS-192405 530 x 120 links 95.95

PART # DESCRIPTION NATURAL (CONT) K18-5197 Clip-type conn. link CHROME DS-192410 530 x 102 links DS-192411 530 x 104 links DS-192412 530 x 106 links DS-192413 530 x 110 links

SUG. RETAIL $6.95 88.95 90.95 92.95 95.95

PART # DESCRIPTION CHROME (CONT) DS-192414 530 x 112 links DS-192415 530 x 120 links K18-5199 Chrome clip-type conn. link

SUG. RETAIL

PART # DESCRIPTION 530 DRZ2 (CONT) 1221-0016 160 links 1225-0082 Clip connecting link 1225-0083 Rivet connecting link

SUG. RETAIL

$97.95 104.95 6.95

DR2/DRZ2 SERIES CHAIN •530 DRZ2 is designed in conjunction with Pierre Elliott of Diamond Powersports •530 DRZ2 features Zero Stretch Technology that eliminates measurable chain stretch during the first 600 miles of use •530 DR2 is for street bike drag racing •Both chain and connecting links are chrome plated PART # 530 DR2 1221-0009 1221-0010 1221-0011 1221-0012 1225-0080

DESCRIPTION

SUG. RETAIL

130 links 140 links 150 links 160 links Clip connecting link

$140.95 151.95 162.95 173.95 5.95

PART # DESCRIPTION 530 DR2 (CONT) 1225-0081 Rivet connecting link 530 DRZ2 1221-0013 130 links 1221-0014 140 links 1221-0015 150 links

SUG. RETAIL $5.95 173.95 186.95 200.95

$213.95 5.95 5.95

LIGHTING HANDLEBARS, ZZZ 520 SERIES CHAIN CONTROLS THE PINNACLE OF CHAIN TECHNOLOGY chain features a revolutionary side plate profile that & MIRRORS •Ultra-strong more effectively distributes load onto side plate CABLES BRAKES TANKS & OIL FILTERS

•Lightweight design includes lightening holes in side plate that reduce chain’s overall weight by 3% without compromising 1223-0062 tensile strength •Lightening holes also extend service life by dissipating heat and reducing dirt and mud build-up •Zero Stretch Technology virtually eliminates initial chain stretch with no chain adjustment needed in the first 1000km of use PART # GOLD 1223-0061 1223-0063 1225-0076

DESCRIPTION

SUG. RETAIL

120 links 150 links Rivet connecting link

$202.95 253.95 7.95

PART # CHROME 1223-0062 1223-0064 1225-0075

DESCRIPTION 120 links 150 links Rivet connecting link

1223-0063

SUG. RETAIL $202.95 253.95 7.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

518

SUPER SPORT SERIES 530 ZVX2 SEALED CHAIN •For competition and OEM replacement •All the features of Sport sealed chain with X-rings for 50% or more chain life •Thicker side plates and bigger pins for dependable strength and durability on high-performance machines up to 1,400cc •Tensile strength of 10,560 lb. •Replacement rivet connecting links are available PART # GOLD 1223-0010 K530ZVX-120 1223-0004 CHROME 1223-0011 1223-0003 1223-0005 RED 1223-0012 1223-0016 1223-0020

DESCRIPTION

SUG. RETAIL

110 links 120 links 150 links

$174.95 190.95 237.95

110 links 120 links 150 links

174.95 190.95 237.95

110 links 120 links 150 links

182.95 199.95 248.95

PART # BLUE 1223-0013 1223-0017 1223-0021 GREEN 1223-0014 1223-0018 1223-0022 YELLOW 1223-0015 1223-0019 1223-0023

DESCRIPTION

SUG. RETAIL

110 links 120 links 150 links

$182.95 199.95 248.95

110 links 120 links 150 links

182.95 199.95 248.95

110 links 120 links 150 links

182.95 199.95 248.95

PART # DESCRIPTION BLACK 1223-0141 120 links 1223-0142 150 links RIVET CONNECTING LINKS 1225-0018 Chrome K18-5217 Gold 1225-0022 Natural 1225-0102 Black

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $199.95 248.95 $9.95 9.95 9.95 9.95


SECTION

8

WINDSHIELDS TOURING TSUBAKI 530 SERIES DRIVE CHAIN

LUGGAGE

530 HSL •Lube-free chain has shot-peened side plates, sintered-metal bushings impregnated with lubricant and quad-staked riveting •Recommended exclusively for motorcycles originally equipped with non-O-ring chain •Average tensile strength: 7,040 lb. •Master link included NOTE: Not recommended for drag race applications. PART # DESCRIPTION H18-126-102 102 links H18-126-106 106 links H18-126-108 108 links

SUG. RETAIL $89.95 93.95 95.95

SEATS & SISSY BARS

PART # H18-126-110 H18-126-112 H18-126-120

DESCRIPTION 110 links 112 links 120 links

SUG. RETAIL $96.95 98.95 105.95

EXHAUST FUEL/AIR SYSTEMS

530HSL/NP NICKEL-PLATED •Same as 530HSL •Features nickel-plated side plates for a rustless finish •Recommended exclusively for motorcycles originally equipped with non-O-ring chain •Master link included NOTE: Not recommended for drag race applications. SUG. PART # DESCRIPTION RETAIL H18-146-102 102 links $118.95 H18-146-106 106 links 122.95 H18-146-110 110 links 127.95

SUG. PART # DESCRIPTION RETAIL H18-146-112 112 links $130.95 H18-146-120 120 links 139.95

530 SIGMA O-RING •Super-high-performance chain features flat link plates, solid rollers, quad-staked pin rivets and super-seal O-rings •Excellent fatigue strength/wear resistance •Tensile strength: 10,600 lb. •Master link included SUG. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL H18-138-100 100 links $155.95 H18-138-112 112 links $174.95 H18-138-102 102 links 158.95 H18-138-114 114 links 177.95 H18-138-104 104 links 162.95 H18-138-116 116 links 180.95 H18-138-106 106 links 165.95 H18-138-118 118 links 183.95 H18-138-108 108 links 168.95 H18-138-120 120 links 186.95 H18-138-110 110 links 171.95 H18-138-130 130 links 202.95

530 OMEGA “S” O-RING

ENGINE

•Features high fatigue strength and shock resistance in an anti-kink design •Made of select alloy steel that is heat-treated and shot-peened •Super Seal O-rings keep vacuum-injected grease in, dirt out •Approximately 9,000 lb. tensile strength •Master link included NOTE: Not for modified H-D use. SUG. PART # DESCRIPTION RETAIL H18-160-100 100 links $108.95 H18-160-102 102 links 110.95 H18-160-104 104 links 112.95 H18-160-106 106 links 115.95 H18-160-108 108 links 116.95 H18-160-110 110 links 119.95

PART # H18-160-112 H18-160-114 H18-160-116 H18-160-118 H18-160-120 H18-160-130

TRANSMISSION & DRIVELINE

SUG. DESCRIPTION RETAIL 112 links $121.95 114 links 124.95 116 links 108.95 118 links 127.95 120 links 130.95 130 links 140.95

PART # DESCRIPTION TSUBAKI CONNECTING LINKS H18-127 530HSL connecting link (ea.) H18-139 530 Sigma O-ring connecting link (ea.) H18139R 530 Sigma rivet link (ea.) H18-147 530HSL/NP connecting link (ea.) H18161 530 Omega O-ring connecting link (ea.) H18161R 530 Omega rivet link (ea.)

SUG. RETAIL $4.95 5.95 5.95 4.95 5.95 5.95

GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

ZRT SERIES CHAIN •Features high-performance Z40 sealing rings, which dramatically improve performance and wear life; make obsolete all previous X-ring chains •Features high-carbon alloy pins to minimize wear and increased roller thickness to prolong life •Thicker outer plates and four-sided riveting means a greater average tensile strength of 9,217 lb. •Gold outer plates with copper rollers •Ideal for street and superbikes motorcycles up to 1,300cc PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION RG530ZRT-110 530 x 110 links $175.95 RG530ZRT-120 530 x 120 links RG530ZRT-114 530 x 114 links 181.95 RG530ZRT-130 530 x 130 links

TANKS & OIL FILTERS DASHES & GAUGES SUG. RETAIL $191.95 207.95

PART # DESCRIPTION SUG. RETAIL $7.95 RG18-531ZRT Connecting link, rivet

DRAG RACING CHAIN •Ultimate strength is not as important as fatigue resistance in drag racing or on the street •520DR has a breaking strength of 8,542 lb. and a fatigue limit of 1,800 lb. •530DR has a breaking strength of 10,790 lb. and a fatigue limit of 2,135 lb., which is sufficient up to Pro Stock level PART # 520DR 1221-0070 1221-0071 1221-0072 1221-0073 1221-0074

DESCRIPTION 120 130 140 150 160

SUG. RETAIL $125.95 135.95 144.95 154.95 164.95

PART # DESCRIPTION SUG. RETAIL 520DR (CONT) 1225-0142 Connecting link, clip $11.95 1225-0143 Connecting link, rivet 10.95 530DR 1221-0025 130 159.95 1221-0026 140 171.95

PART # DESCRIPTION 530DR (CONT) 1221-0027 150 1221-0028 160 1221-0029 50’ length 1225-0101 Connecting link, clip

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $182.95 194.95 1,183.95 13.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

519


SECTION

8

WINDSHIELDS 5-SPEED TRANSMISSION PULLEYS TOURING

•Available in lightweight race (7075-T-651 aluminum) and long-life (4140-gear steel) styles •Lightweight race 32T pulleys weigh 2 lb.; that’s 61% less than a stock 32T H-D pulley •Long-life 32T pulleys weigh 4 lb.; that’s 23% less than a 32T H-D pulley •A smaller pulley gives you more low-end torque, while a larger pulley gives you lower rpm in top gear •Made in the U.S.A.

1110-0005

NOTE: 94-06 models will require the use of spacer PART #1106-0001; sold separately.

LUGGAGE

NOTE: 85-93 models will require the use of spacer PART #1106-0001 and seal PART #DS-194088; sold separately. NOTE: Changing pulley size may also require a belt change.

SEATS & SISSY BARS EXHAUST

PART # DESCRIPTION LONG-LIFE 4140 GEAR STEEL PULLEYS FOR 85-06 BIG TWIN (EXCEPT 06 FXD, FXDWG) 1110-0009 29-tooth 1110-0010 30-tooth 1110-0011 31-tooth 1110-0012 32-tooth 1110-0013 33-tooth

SUG. RETAIL

PART # DESCRIPTION SUG. RETAIL LIGHTWEIGHT 7075 T-651 ALUMINUM PULLEYS FOR 85-06 BIG TWIN (EXCEPT 06 FXD, FXDWG) 1110-0005 30-tooth $175.95 1110-0006 31-tooth 175.95 1110-0007 32-tooth 175.95 1110-0008 33-tooth 175.95

$167.95 167.95 167.95 167.95 167.95

FUEL/AIR SYSTEMS XL TRANSMISSION PULLEY

ENGINE

•7075-T-651 aluminum •26-tooth pulley is designed for race applications; 2 lb. lighter than a stock pulley •Made in the U.S.A.

TRANSMISSION & DRIVELINE

NOTE: Changing pulley size may also require a belt change. PART # 1811-0006

DESCRIPTION For 91-03 XL, 94-02 Buell (except Blast)

SUG. RETAIL $175.95

GASKETS & SEALS BELT DRIVE TRANSMISSION PULLEY

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

520

•29-tooth power sprocket provides a 9% higher gear ratio advantage over stock 32-tooth sprockets; 30-tooth power sprockets provide a 6% higher gear ratio advantage •At 60 mph, 34-tooth overdrive sprockets reduce engine speed by approximately 240 rpm, with less noise and vibration •Machined from heat-treated, gear-quality steel •Made in the U.S.A. NOTE: May require some elongation of axle hole in swingarm or change in belt length to allow for proper belt adjustment

PART # DESCRIPTION SUG. RETAIL FOR ALL 07-10 SIX-SPEED BELT DRIVE MODELS AND 06 DYNA GLIDE 1201-0227 30-tooth “Good Acceleration $137.95 1201-0226 34-tooth “Smooth Cruising 137.95 FOR 94-06 BIG TWIN FIVE-SPEED BELT DRIVE MODELS (EXCEPT 06 DYNA GLIDE) DS-199479 29-tooth “Better Acceleration” 137.95 DS-199477 30-tooth “Good Acceleration” 137.95 DS-199478 34-tooth “Smooth Cruising” 137.95 REAR WHEEL 70 70 70 70

TRANS. 29 30 32 (stock) 34

OVERALL 3.72 3.60 3.37 3.17

DS-199461

1201-0226

REAR WHEEL 65 65 65 65

DS-199479 PART # DESCRIPTION FOR 85-93 BIG TWIN FIVE-SPEED BELT DRIVE MODELS DS-199462 30-tooth “Good Acceleration” DS-199460 29-tooth “Better Acceleration” DS-199461 34-tooth “Smooth Cruising”

TRANS. 29 30 32 (stock) 34

OVERALL 3.23 3.12 2.93 2.75

REAR WHEEL 61 61 61 61

TRANS. 29 30 32 (stock) 34

SUG. RETAIL $148.95 148.95 148.95

OVERALL 3.24 3.13 2.94 2.76

TRANSMISSION PULLEYS •Made from 356 T-6 aluminum, then hard anodized for long life •One-third the weight of stock pulleys •All 85-06 Big Twin pulleys come with a spacer for use on 85-93 models •When using a larger or smaller pulley, change in belt length and modifications to the axle adjustment slots may be required •Made in the U.S.A.

DS-360165

PART # FOR 85-06 BIG DS-360164 DS-360165 DS-360166 DS-360167 DS-360168

DESCRIPTION TWIN (5-SPEED) 29-tooth 30-tooth 31-tooth 32-tooth 33-tooth

SUG. RETAIL $123.95 123.95 123.95 123.95 123.95

All part numbers in BOLD MAGENTA are new for 2010.

PART # DESCRIPTION SUG. RETAIL FOR 85-06 BIG TWIN (5-SPEED) (CONT) DS-360169 34-tooth $123.95 FOR 91-03 XL AND BUELL DS-360046 28-tooth 123.95 DS-360047 29-tooth 123.95 DS-360048 30-tooth 123.95


SECTION

8

WINDSHIELDS .200” OFFSET SPROCKET KITS

TOURING

•Allows installation of extra-wide tires or changing of final drive ratio by converting from belt to chain drive •Big Twin sprockets available in 23- and 24-tooth versions •XL sprockets available in 21- and 22-tooth versions •Kits include offset sprocket and machined spacer PART # DESCRIPTION FOR 85-94 BIG TWIN FXR, 86-99 SOFTAIL DS-1994971 23-tooth offset sprocket kit w/ spacer 24-tooth offset sprocket kit w/ spacer DS-1994961 FOR 86-90 XL DS-191056 21-tooth (stock) kit w/ spacer

LUGGAGE DS-199496

SUG. RETAIL $36.95 36.95

DS-191053

PART # DESCRIPTION FOR 86-90 XL (CONT) DS-191053 22-tooth kit w/ spacer 1

SEATS & SISSY BARS

SUG. RETAIL $36.95

EXHAUST

For 86-99 Softail models when used with 73-85 4-speed rear sprockets and 85-94 FXR models when used with FXR rear sprockets.

36.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

PBI TRANSMISSION MAINSHAFT SPROCKETS •Premium chromoly steel (8620) heat-treated one-piece sprockets machined on computer-controlled lathes •Broached specifically for maximum spline-to-shaft contact for optimum load bearing •Made in the U.S.A.

GASKETS & SEALS

FOR 85-86 BIG TWIN 4-SPEED SUG. PART # DESCRIPTION RETAIL DS-191086 22-tooth sprocket; repl. OEM #s 33338-83 and 35203-80 $23.95 DS-191087 23-tooth sprocket; repl. OEM #s 35212-80 and 33337-83 23.95

SUG. RETAIL $23.95

PART # DESCRIPTION DS-191088 24-tooth sprocket

ELECTRICAL

FOR 91-92 XL PART # DS-191081 DS-191089 DS-191090

DESCRIPTION 19-tooth sprocket 20-tooth sprocket 21-tooth sprocket; repl. OEM #37709-89

SUG. RETAIL $35.95 35.95 35.95

A

PART # DS-191091 DS-191092 DS-191093

B

DESCRIPTION 22-tooth sprocket 23-tooth sprocket 24-tooth sprocket

C

D

SUG. RETAIL $35.95 35.95 35.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

E

CABLES BRAKES

OFFSET TRANSMISSION SPROCKETS •CNC-machined from a premium nickel, chromoly steel (8620), case-hardened and finished with an electroless nickel plating for corrosion/wear resistance and lubricity •Sprockets are drilled and tapped to accommodate late-model lock plate, PART # DS-360182, available separately •Will also fit 86-93 Big Twin models with use of OEM #33344-94 (spacer), OEM #12067A (seal) and OEM #11165 (O-ring) •Offset measurement is taken from the face that rests against the mainshaft bearing to the inside of the teeth for “Total Offset” description •For use with .530 pitch chain •Made in the U.S.A. FOR 86-06 BIG TWIN 5-SPEED MODELS, 91-03 SPORTSTER AND 94-02 BUELL WITH CHAIN CONVERSIONS PART # DESCRIPTION 1.310” TOTAL OFFSET COUNTER SHAFT SPROCKET 1212-0262 24-tooth sprocket 1.06” OFFSET COUNTER SHAFT SPROCKET PBI-288-23 23-tooth sprocket PBI-288-24 24-tooth sprocket .750” TOTAL OFFSET COUNTER SHAFT SPROCKET PBI-281-21 21-tooth sprocket PBI-281-22 22-tooth sprocket PBI-281-23 23-tooth sprocket

SUG. RETAIL $125.95 89.95 89.95 74.95 74.95 74.95

PART # DESCRIPTION .750” TOTAL OFFSET COUNTER SHAFT SPROCKET (C)NT) PBI-281-24 24-tooth sprocket .500” TOTAL OFFSET COUNTER SHAFT SPROCKET 1212-0136 22-tooth sprocket 1212-0137 23-tooth sprocket 1212-0138 24-tooth sprocket .000” TOTAL OFFSET COUNTER SHAFT SPROCKET 1212-0260 23-tooth sprocket 1212-0261 24-tooth sprocket

TANKS & OIL FILTERS DASHES & GAUGES

SUG. RETAIL $74.95 67.95 67.95 67.95 67.95 67.95

06 6-SPEED DYNA GLIDE AND 07-10 6-SPEED BIG TWIN (EXCEPT 08-10 DRESSER) PART # DESCRIPTION .750” TOTAL OFFSET COUNTER SHAFT SPROCKET 1212-0526 24-tooth sprocket 1212-0383 25-tooth sprocket 1212-0384 26-tooth sprocket

SUG. RETAIL $99.95 98.95 98.95

PART # DESCRIPTION .500” TOTAL OFFSET COUNTER SHAFT SPROCKET 1212-0523 24-tooth sprocket 1212-0524 25-tooth sprocket 1212-0525 26-tooth sprocket

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $99.95 99.95 99.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

521


SECTION

8

WINDSHIELDS TOURING LUGGAGE OFFSET TRANSMISSION SPROCKETS

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

•Used when installing a wider than stock tire in a stock frame or when a fat tire bike needs more clearance than a belt will allow •Available in .200”, .500” and .900” offsets; for use with 530 chain only •Made in the U.S.A.

1212-0054

NOTE: May require modification of XL sprocket cover and Big Twin inner primary cover. FOR 07-10 BIG TWIN AND 06 FXD, FXDWG PART # DESCRIPTION SUG. RETAIL .200” OFFSET SPROCKET 1212-0528 25-tooth $134.95

1212-0051

FOR 94-06 BIG TWIN (EXCEPT 06 FXD, FXDWG) AND 91-03 XL MODELS WITH CHAIN DRIVE CONVERSION PART # DESCRIPTION .500” OFFSET SPROCKET 1212-0053 21-tooth 1212-0054 22-tooth 1212-0055 23-tooth 1212-0056 24-tooth

SUG. RETAIL $66.95 66.95 66.95 66.95

PART # DESCRIPTION .900” OFFSET SPROCKET 1212-0051 24-tooth 1212-0052 23-tooth

SUG. RETAIL $151.95 151.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

MEGA NUT •The cure for a loose transmission pulley •Nut has a built-in lock plate •For models with a final belt drive; can also be used on aftermarket pulleys by drilling and tapping a hole in the pulley •Made in the U.S.A.

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

DRIVE PULLEY INSTALLATION KIT •Kit includes a main shaft pulley nut, lock plate, bolts and quad seal PART # 1203-0009

DESCRIPTION For 93-06 Big Twin (except 06 Dyna Glide); repl. OEM #s 11165 (quad seal), 35211-91 (mainshaft nut) and 40251-92 (lock plate)

SUG. RETAIL

DASHES & GAUGES

SUG. RETAIL $73.95

TRANSMISSION SPROCKET SPACER •Case-hardened steel with a Rockwell “C” hardness of 55 and a polished finish •Sold each •Made in the U.S.A.

MAINSHAFT SPROCKET OR BELT PULLEY NUT

PART # 1106-0001

•Replacement nut attaches mainshaft sprocket or belt pulley to main drive gear •Sold each

FRAMES, PART # DESCRIPTION SUSPENSION DS-194079 For 84-92 Big Twin; repl. OEM #35211-36 & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS TRANSMISSION BELT PULLEY HARDWARE, LOCK PLATE KIT with locking plate CHEMICALS •Comes mounting screws & TOOLS •Made in the U.S.A. DESCRIPTION COVERS, PART # SECURITY DS-360182 For 85-06 Big Twin (except 06 Dyna Glide); repl. OEM #s 40251-92A and 3594 & GENERAL

522

DESCRIPTION For 93-06 Big Twin (except 06 Dyna Glide), 91-10 XL, 94-09 Buell (except 1125R)

$24.95

BRAKES TANKS & OIL FILTERS

PART # DS-194003

DESCRIPTION For L94-06 Big Twin (except 06 FXD, FXDWG); repl. OEM #33344-94

SUG. RETAIL $5.95

SUG. RETAIL $19.95

DS-197053

TRANSMISSION SPROCKET SPACERS •Smooth finish for a longer seal life •Sold each •Made in the U.S.A. PART # DS-197062 SUG. RETAIL DS-197053 $7.95

DESCRIPTION For L94-06 Big Twin (except 06 Dyna Glide); repl. OEM #33344-94 (.600”) For L84-E94 Big Twin 5-speed; repl. OEM #33334-85 (.8490”)

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $34.95 34.95


SECTION

8

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS Mission

EXHAUST

Domino

FUEL/AIR SYSTEMS ENGINE

Diesel

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL Judge

Ronin

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

Diesel Chrome

FORGED ALUMINUM PULLEYS •CNC-machined for an exact match to the Roland Sands Design wheel line up •Precision-shaped tooth profile is designed to fit the belt perfectly •Available in chrome (Diesel only) or Contrast Cut™ •Contrast Cut™ finish starts with a polished pulley that has been black anodized then recut to open up the design (except Diesel chrome) •All applications require mounting bolts to be purchased separately •Made in the U.S.A. by Performance Machine

CABLES BRAKES

NOTE: For matching rotors and wheels, see BRAKES and TIRE, TUBES & WHEELS sections. NOTE: 08 FLHT/FLHR/FLHX/FLTR applications will require the removal of the cush-drive for installation. DESCRIPTION DOMINO JUDGE DIESEL MISSION FOR 08-10 FLSTF, 08-10 FXST/B/C (20MM) 66-tooth 1201-0315 1201-0316 1201-0317 1201-0385 FOR 07 FXST/B/C, 07 FLSTF (20MM) 66-tooth 1201-0219 1201-0220 1201-0263 1201-0381 FOR 07 FLSTC/N (1.0”) 66-tooth 1201-0252 1201-0251 1201-0264 1201-0382 FOR 06 FXST (20MM) 70-tooth 1201-0168 1201-0156 1201-0260 1201-0378 FOR 00-06 FXST/FLST (11/8”), EXCEPT 06 FXST 70-tooth 1201-0167 1201-0154 1201-0257 1201-0377 FOR 08 FLHT/FLTR/FLHR/FLHX (1.0”) 66-tooth 1201-0311 1201-0312 1201-0313 1201-0384 FOR 07 FLHT/FLTR/FLHR/FLHX (1.0”) 66-tooth 1201-0212 1201-0214 1201-0261 1201-0379 FOR 07-10 FXD/B/C, FXDWG (1.0”) 66-tooth 1201-0213 1201-0215 1201-0262 1201-0380 FOR 06 FXD (11/8”) 70-tooth 1201-0280 1201-0279 1201-0278 1201-0383 FOR 86-99 SOFTAIL, 91-05 DYNA GLIDE, 85-94 FXR, 04-06 FLT (11/8”) 65-tooth 1201-0165 1201-0152 1201-0255 1201-0375 70-tooth 1201-0166 1201-0153 1201-0256 1201-0376 1 FOR 86-99 SOFTAIL, 91-99 DYNA GLIDE, 85-94 FXR (1 /2”) 65-tooth 1201-0163 1201-0150 1201-0253 1201-0373 70-tooth 1201-0164 1201-0151 1201-0254 1201-0374 1

RONIN

SUG. RETAIL

DIESEL CHROME

SUG. RETAIL

1201-03981

$578.95

1201-0318

$599.95

1201-03941

578.95

1201-0275

599.95

1201-03951

578.95

1201-0276

599.95

1201-03911

578.95

1201-0272

599.95

1201-03901

578.95

1201-0269

599.95

1201-03971

578.95

1201-0314

599.95

1201-03921

578.95

1201-0273

599.95

1201-03931

578.95

1201-0274

599.95

1201-03961

578.95

1201-0277

599.95

1201-03881 1201-03891

578.95 578.95

1201-0267 1201-0268

599.95 599.95

1201-03861 1201-03871

578.95 578.95

1201-0265 1201-0266

599.95 599.95

For left side applications only because directional design.

All part numbers in BOLD MAGENTA are new for 2010.

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

523


SECTION

8

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS

UNIVERSAL REAR CUSH-DRIVE ALUMINUM PULLEYS •CNC-machined aluminum construction •Precision-shaped 68-tooth profile is designed to fit belt perfectly •Available in chrome or Contrast Cut™ finishes •Contrast Cut finish starts with a polished pulley that has been black anodized and then recut to open up the design •Made in the U.S.A. PART # DESCRIPTION FOR 09-10 FLHT/FLTR/FLHR/FLHX (1.0”) 1201-0463 Chrome

Chrome SUG. RETAIL $649.95

Contrast Cut PART # DESCRIPTION FOR 09-10 FLHT/FLTR/FLHR/FLHX (1.0”) (CONT) 1201-0462 Contrast Cut

SUG. RETAIL $599.95

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

Rival

Hooligan

Wrath

IMAGE SERIES CHROME-FORGED ALUMINUM PULLEYS •CNC-machined for an exact match to PM wheels •Precision-shaped tooth profile is designed to fit the belt perfectly •Available in chrome or Contrast Cut™ •Contrast Cut pulleys start with a polished Torque Gasser Rival pulley that has been Contrast-Cut Contrast Cut black anodized and then re-cut to open up the design •00-06 Softail except 06 FXST and 06 FXD pulleys include mounting bolts; all other applications require mounting bolts to be purchased separately (see HARDWARE, CHEMICALS & TOOLS section) •Made in the U.S.A. NOTE: For matching rotors and wheels see BRAKES and TIRES, TUBES & WHEELS sections.

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

524

NOTE: 08 FLHT/FLHR/FLHX/FLTR applications will require the removal of the cush-drive for installation. DESCRIPTION RIVAL HOOLIGAN WRATH TORQUE FOR 08-10 FLSTF, 08-10 FXST/B/C (20MM) 66-tooth 1201-04921 1201-0329 1201-0325 1201-03261 FOR 07 FLSTC/FLSTN (1.0”) 66-tooth 1201-04891 1201-0249 1201-0246 1201-02451 FOR 07 FXST/FXSTB/FXSTC, 07 FLSTF (20MM) 66-tooth 1201-04901 1201-0222 1201-0225 1201-02241 FOR 06 FXST MODELS (20MM) 70-tooth 1201-04861 1201-0110 1201-0111 1201-01091 FOR 00-06 FXST/FLST (11/8”), EXCEPT 06 FXST MODELS 70-tooth 1201-04841 1102-5264 1201-0026 1201-00801 FOR 07-10 DYNA GLIDE (1.0”) 66-tooth 1201-04881 1201-0204 1201-0207 1201-02061 FOR 06 DYNA GLIDE (11/8”) 70-tooth 1201-04851 1201-0107 1201-0108 1201-01061 FOR 86-99 SOFTAIL, 91-05 DYNA GLIDE, 84-94 FXR, 04-06 FLT (11/8”) 65-tooth 1201-04821 1102-5262 1201-0024 1201-00781 70-tooth 1201-04831 1102-5263 1201-0025 1201-00791 FOR 86-99 SOFTAIL, 91-99 DYNA GLIDE, 84-94 FXR (11/2”) 65-tooth 1201-04801 1102-5260 1201-0022 1201-00761 70-tooth 1201-04811 1102-5261 1201-0023 1201-00771 FOR 08 FLHT/FLHR/FLHX/FLTR (1.0”) 66-tooth 1201-04911 1201-0323 1201-0319 1201-03201 FOR 07 FLHT/FLHR/FLHX/FLTR (1.0”) 66-tooth 1201-04871 1201-0199 1201-0202 1201-02011 FOR 85-03 FLT (11/2”) 70-tooth 1201-04811 1102-5261 1201-0023 1201-00771 1

RIVAL CONTRAST-CUT

GASSER CONTRAST CUT

$599.95

1201-04791

1201-0372

$578.95

599.95

1201-0476

1

1201-0369

578.95

599.95

1201-04771

1201-0370

578.95

599.95

1201-04731

1201-0366

578.95

599.95

1201-04711

1201-0364

578.95

599.95

1201-04751

1201-0368

578.95

599.95

1201-04721

1201-0365

578.95

599.95 599.95

1201-04691 1201-04701

1201-0362 1201-0363

578.95 578.95

599.95 599.95

1201-04671 1201-04681

1201-0360 1201-0361

578.95 578.95

599.95

1201-04781

1201-0371

578.95

599.95

1201-04741

1201-0367

578.95

599.95

1201-04681

1201-0361

578.95

SUG. RETAIL

For left side applications only because of directional design.

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL


SECTION Calypso

Savage

8

Savage Eclipse

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS

Imperial

Czar

EXHAUST

Czar Eclipse

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

REAR PULLEYS •Made from the highest-quality forged aluminum to create a strong and durable pulley •CNC-machined and quality tested to ensure finest product possible •Calypso, Savage, Imperial and Czar are available in a chrome finish •Savage and Czar are also available in Eclipse finish which combines black powder-coat and raw metal for a truly evil look •Available in 65-, 66-, 70- and 72-tooth configurations •Belt pulleys match RC Components’ wheels and brake rotors •Made in the U.S.A. DESCRIPTION CALYPSO SAVAGE SAVAGE ECLIPSE IMPERIAL CZAR CZAR ECLIPSE FOR 07-10 FXST/FXSTB/FXSTC, 07-10 FLSTF (20MM) 66-tooth 1201-0340 1201-0512 1201-0290 1201-0304 FOR 06 FXST (20MM) 70-tooth 1201-0337 1201-0408 1201-0509 1201-0409 1201-0287 1201-0301 FOR 07-10 FLSTC/FLSTN, 07 FXSTD, 08-10 FXCW/C (1”) 66-tooth 1201-0346 1201-0429 1201-0517 1201-0428 1201-0296 1201-0310 FOR 06 FLST/C/N (11/8”) 70-tooth 1201-0336 1201-0417 1201-0508 1201-0416 1201-0286 1201-0300 FOR 00-05 FXST/FLST, 00-05 DYNA GLIDE (11/8”) 70-tooth 1201-04061 1201-04071 1201-02861 1201-03001 FOR 86-99 FXST/FLST, 84-99 FLT, FLHT, FLHR, FLTR, 91-99 DYNA GLIDE, 85-94 FXR (11/2”) 65-tooth 1201-0333 1201-0399 1201-0505 1201-0400 1201-0283 1201-0297 70-tooth 1201-0335 1201-0404 1201-0507 1201-0405 1201-0285 1201-0299 FOR 07 FLHT, FLHX, FLHR, FLTR (1”) 66-tooth 1201-0341 1201-0419 1201-0513 1201-0418 1201-0291 1201-0305 FOR 04-06 FLHT, FLHX, FLHR, FLTR AND 06 DYNA GLIDE (11/8”) 70-tooth 1201-0338 1201-0412 1201-0510 1201-0413 1201-0288 1201-0302 FOR 02-03 FLHT, FLHR, FLTR (11/2”) 70-tooth 1201-0344 1201-0424 1201-0516 1201-0425 1201-0294 1201-0308 FOR 00-01 FLHT, FLHR, FLTR (11/2”) 70-tooth 1201-02851 1201-02991 FOR 07-10 FXD (1”) 66-tooth 1201-0345 1201-0426 1201-0515 1201-0427 1201-0295 1201-0309 FOR 07-10 V-ROD 240MM REAR TIRE (28MM) 72-tooth 1201-0342 1201-0421 1201-0514 1201-0420 1201-0292 1201-0306 FOR 07-10 V-ROD, EXCEPT 240MM REAR TIRE (11/8”) 72-tooth 1201-0343 1201-0293 1201-0307 FOR 02-06 V-ROD (13/8”) 72-tooth 1201-0339 1201-0414 1201-0511 1201-0415 1201-0289 1201-0303 RSD CUSTOM APPLICATION PULLEYS (11/2”) 65-tooth 1201-02831 1201-02971 70-tooth 1201-02851 1201-02991 RSD CUSTOM APPLICATION PULLEYS (11/8”) 65-tooth 1201-0334 1201-0401 1201-0506 1201-0403 1201-0284 1201-0298 70-tooth 1201-0286 1201-0300 1

ELECTRICAL LIGHTING SUG. RETAIL $495.95 495.95 495.95

DESCRIPTION Pulley adapter

All part numbers in BOLD MAGENTA are new for 2010.

CABLES

495.95 495.95

BRAKES

495.95 495.95 495.95

TANKS & OIL FILTERS

495.95 495.95 495.95 495.95 495.95 495.95 495.95 495.95 495.95 495.95 495.95

Requires RC Components Pulley Adapter, PART #1201-0191.

PART # BELT PULLEY ADAPTER 1201-0191

HANDLEBARS, CONTROLS & MIRRORS

SUG. RETAIL $10.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

525


SECTION

8

WINDSHIELDS REAR PULLEYS

TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

•Manufactured in the U.S.A. exclusively for Drag Specialties •Chromed billet pulleys in 65- or 70-tooth configuration •Available in three styles: Smooth, Mesh and Klassic •Center-hole design hides the wheel-hub seal for a cleaner look •Designed to complement the Drag Specialties laced wheel •Matching brake rotors available separately NOTE: For matching rotors see BRAKES section. SUG. APPLICATION 65 TOOTH RETAIL 66-TOOTH FOR 07-08 FXST (20MM) Mesh 1201-0158 Klassic 1201-0157 FOR 00-06 SOFTAIL (11/8”), EXCEPT 06 FXST MODELS Smooth 1201-0010 $322.95 Mesh 1201-0009 430.95 Klassic 1201-0008 430.95 FOR 00-06 DYNA GLIDE (11/8”) Smooth Mesh Klassic -

70 TOOTH -

Smooth SUG. RETAIL $430.95 430.95

1201-0013 1201-0012 1201-0011

322.95 430.95 430.95

1201-0016 1201-0015 1201-0014

322.95 430.95 430.95

Klassic

Mesh SUG. RETAIL

APPLICATION 65 TOOTH FOR 00-03 DRESSERS (11/2”) Smooth Mesh Klassic FOR 86-99 BIG TWIN (11/2”) Smooth 1201-0004 $322.95 Mesh 1201-0006 430.95 Klassic 1201-0020 430.95

SUG. RETAIL

66-TOOTH

70 TOOTH

-

1201-0019 $322.95 1201-0018 430.95 1201-0017 430.95

-

1201-0005 1201-0007 1201-0021

322.95 430.95 430.95

TRANSMISSION & DRIVELINE GASKETS & SEALS Psycho

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

Evil-7

NESS-TECH® PULLEYS

Jagged

Battistini, black anodized

•Precision-machined from a single piece of 6061 T-6 aluminum forging •Design is machined into both sides of the pulley •Perfect match to the NESS-TECH® wheels and rotors •11/2” pulleys include an adapter ring to allow mounting on most 86-06 style wheels •11/8” pulleys, for 00-06 Big Twin will fit 86-99 wheels if used with optional adapter ring PART #DS-330000 SUG. RETAIL $16.95

Optional adapter ring

NOTE: Pulleys listed for 86-06, 00-06 Big Twins are not for use on 06 FXST, 04-06 FLT and Dyna models. NOTE: For matching rotors and wheels see BRAKES and TIRES, TUBES & WHEELS sections. DESCRIPTION 65 TOOTH FOR 07 FXST/FLSTF (20MM) Psycho Evil-7 Jagged Battistini Battistini, black anodized FOR 07 FXSTD/FLST/FLT/DYNA GLIDE Psycho Evil-7 Jagged Battistini Battistini, black anodized FOR 86-06 BIG TWINS (11/2”) Psycho 1102-5313 Evil-7 1201-0034 Jagged 1201-0117

66 TOOTH

70 TOOTH SUG. RETAIL

1201-0434 1201-0435 1201-0436 1201-0437 1201-0465 (25MM) 1201-0430 1201-0431 1201-0432 1201-0433 1201-0464

-

$499.95 499.95 499.95 499.95 599.95

-

499.95 499.95 499.95 499.95 599.95

-

1102-5314 1201-0036 1201-0118

499.95 499.95 499.95

Solid FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES POLISHED 11/2” TIRES, REAR BELT PULLEYS TUBES & •CNC billet aluminum construction are gear-cut to RMA standards for a WHEELS •Teeth perfect belt fit in 65- or 70-tooth styles Mesh HARDWARE, •Available •Made in the U.S.A. CHEMICALS 86-99 BIG TWIN & TOOLS FOR PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION 65-TOOTH COVERS, 70-TOOTH $327.95 DS-325817 Solid SECURITY DS-325818 Solid 327.95 DS-325824 Mesh & GENERAL DS-325842 Mesh

526

Battistini

DESCRIPTION 65 TOOTH 66 TOOTH FOR 86-06 BIG TWINS (11/2”) (CONT) Battistini 1201-0125 Battistini, black anodized FOR 00-06 BIG TWINS (11/8”) Psycho Evil-7 Jagged Battistini FOR 04-06 FLT (11/8”) Psycho Evil-7 Jagged FOR 00-06 CUSTOM APPLICATIONS (11/8”) Psycho 1102-5316 Jagged 1201-0120 Battistini 1201-0128 -

70 TOOTH SUG. RETAIL 1201-0126 1201-0466

$499.95 499.95

1102-5315 1201-0035 1201-0119 1201-0127

499.95 499.95 499.95 499.95

1201-0123 1201-0124 1201-0121

499.95 499.95 499.95

-

499.95 499.95 499.95

1201-0461

11/8” CHROME REAR BELT PULLEY

SUG. RETAIL $327.95 327.95

•Machined die-cast aluminum with a polished chrome finish on both sides •70-tooth OEM-style design •PART #1201-0461 features a thinner hub (.87” thick) and is slotted to allow use of OEM cush-drive; intended for custom applications with wide tires or anything that requires slight repositioning of the pulley relative to the tire centerline PART # DESCRIPTION SUG. RETAIL 1201-0003 For 00-05 FXST, 00-06 FLST models; repl. OEM #40289-00 $339.95 1201-0461 For custom/wide tire applications 344.95

All part numbers in BOLD MAGENTA are new for 2010.


SECTION

8

WINDSHIELDS TOURING CHROME REAR WHEEL SPROCKET •High-grade carbon steel 48-tooth replacement rear wheel sprocket •1.9” center hole PART # DS-325354

LUGGAGE

DESCRIPTION 48-tooth for 86-90 XL, 91-92 XLH 883, Hugger; repl. OEM #41470-86 (flat)

SUG. RETAIL $52.95

SEATS & SISSY BARS EXHAUST PBI ALUMINUM REAR DRIVE SPROCKETS •Made from lightweight, strong, 7075-T651 aircraft alloy DS-325148 •Each sprocket polished to a chrome-like finish •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 84-86 4-SPEED BIG TWIN (DISHED) 1.9” CENTER DIAMETER DS-325142 48-tooth sprocket $107.95 DS-325143 49-tooth sprocket 107.95 DS-325144 51-tooth sprocket 114.95 PART # DESCRIPTION SUG. RETAIL FOR 86-90 SPORTSTERS, 91-92 XLX 883 & HUGGERS (FLAT), 00-10 BIG TWINS WITH CHAIN CONVERSION, 1.9”/2.2” CENTER DIAMETER DS-325145 47-tooth $107.95 DS-325146 48-tooth; repl. OEM #41470-86 107.95 DS-325147 49-tooth 107.95 DS-325148 50-tooth 114.95 DS-325149 51-tooth 114.95

530 CHAIN CONVERSION REAR SPROCKETS •Convert rear drive belt to 530 chain •Steel with chrome finish •Available in flat or with 0.54” offset (dished) PART # DESCRIPTION FOR 00-10 MODELS (EXCEPT MODELS W/ CUSH DRIVE); 2.22” CENTER DIAMETER 1210-0375 46-tooth (flat) 1210-0376 47-tooth (flat) 1210-0364 48-tooth (flat) 1210-0365 49-tooth (flat) 1210-0366 51-tooth (flat) 1210-0377 46-tooth (dished) 1210-0378 47-tooth (dished) 1210-0367 48-tooth (dished) 1210-0368 49-tooth (dished) 1210-0369 51-tooth (dished) FOR 86-99 MODELS; 1.9” CENTER DIAMETER 1210-0379 46-tooth (flat) 1210-0380 47-tooth (flat) DS-325354 48-tooth (flat) 1210-0381 46-tooth (dished) DS-325358 47-tooth (dished) DS-325357 48-tooth (dished) DS-325359 51-tooth (dished)

FUEL/AIR SYSTEMS SUG. RETAIL

$59.95 59.95 59.95 59.95 59.95 59.95 59.95 59.95 59.95 59.95 59.95 59.95 52.95 59.95 52.95 52.95 52.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

1212-0318

BRAKES 520 SPROCKET CONVERSIONS

1211-0315

•Sprockets convert 91-99 Sportsters and Buells from belt to 520 chain drive •Chain drive allows use of a wider rear tire •Countershaft sprockets are nickel chromoly steel (8620) same as other PBI mainshaft sprockets •Rear sprockets are constructed of 7075 T-651 alloy with a Chromate finish •Sprockets are sold each; must order one front and one rear sprocket for chain-drive conversion •Drive chains sold separately •Made in the U.S.A.

1230-0001

TANKS & OIL FILTERS DASHES & GAUGES

FOR 91-99 SPORTSTERS AND BUELLS PART # FRONT SPROCKETS 1212-0318 1212-0319 1212-0320 1212-0321 1212-0322 1212-0323 REAR SPROCKETS 1211-0315 1211-0316 1211-0317 1211-0318 1211-0319 1211-0320

DESCRIPTION 19-tooth 20-tooth 21-tooth 22-tooth 23-tooth 24-tooth 48-tooth 49-tooth 50-tooth 51-tooth 52-tooth 53-tooth

SUG. RETAIL $39.95 39.95 39.95 39.95 39.95 39.95 60.95 60.95 65.95 65.95 65.95 65.95

530 CHAIN CONVERSION KITS •Convert rear drive belt to a 530 chain •Include rear sprocket with spacer, front sprocket with spacer, seal, chain, chain guide and bracket •Allow the use of up to a 200mm series rear tire •Available in four ratios •Made in the U.S.A. FRONT REAR PART # SPROCKET SPROCKET FOR 94-02 BUELL (EXCEPT BLAST) 1230-0001 23-tooth 48-tooth 1230-0002 23-tooth 50-tooth 1230-0003 (stock ratio) 23-tooth 52-tooth 1230-0004 23-tooth 54-tooth

All part numbers in BOLD MAGENTA are new for 2010.

RATIO

SUG. RETAIL

2.09 2.17

$344.95 344.95

2.26 2.35

344.95 344.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

527


SECTION

8

WINDSHIELDS TOURING

PULLEY ADAPTER RING

PART # DS-330000

LUGGAGE SEATS & SISSY BARS EXHAUST

REAR PULLEY SPACERS

•Adapts 00-06 1.125” wide pulleys to 99-earlier style wheels •Allows use of up to a 170mm wide tire on 99-earlier applications •Made in the U.S.A. DESCRIPTION For Big Twins

SUG. RETAIL $16.95

•Designed to move 84-99 rear pulley over when using a wide swingarm •Stock bolt pattern, 4” dia. •Made in the U.S.A. PART # DS-199463

PART # 1201-0100 1201-0101 1201-0102

DESCRIPTION Rear pulley spacer (.875”)

SUG. RETAIL $50.95

ENGINE

DESCRIPTION For 00-03 FLHT, FLHR, FLTR models

TRANSMISSION & DRIVELINE

DESCRIPTION .500” .750” .940”

SUG. RETAIL $44.95 46.95 49.95

PART # 1201-0103 1201-0104 1201-0105

DESCRIPTION 1.00” 1.250” 1.375”

SUG. RETAIL $47.95

1201-0053 1201-0057

GASKETS & SEALS

SUG. RETAIL $50.95 54.95 57.95

REAR SPROCKET/ PULLEY SPACERS •Zinc-plated steel spacer shims for rear sprocket or belt pulley •Used often when installing a wider rear tire •Come in various widths

•Allows installation of tires up to 142mm wide without any other modification •CNC-machined from billet aluminum •Made in the U.S.A. PART # 1201-0098

1201-0100

NOTE: Installation of OEM bearing 9267 is recommended with 13/8” spacer PART #1201-0105 (available separately) (machining required).

PULLEY SPACER

REAR PULLEY SPACER

FUEL/AIR SYSTEMS

•Used when installing a wide rear tire •Polished billet aluminum construction •Available in six varying thicknesses; .500” to 1.375” •For use with 00-06 style pulleys and hubs

DS-199458

NOTE: Longer bolts may be required when using spacers. SUG. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL FOR 00-10 MODELS (2.25” I.D.) FOR 84-99 MODELS (2.1” I.D.) 1201-0231 .062” $9.95 DS-325450 .045”; repl. OEM #41814-76 $4.95 1201-0232 .125” 9.95 7805-5050 .200” 9.95 DS-199458 .200”; repl. OEM #40932-81 9.95 7805-5051 .250” 9.95 9.95 7805-5052 .300” 9.95 DS-199459 .250” DS-199464 .300” 9.95

“THE CORRECT” REAR WHEEL

ELECTRICAL PULLEY SPACERS/ADAPTER LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

•Made from 6061 T-6 aluminum and feature a machined finish •All spacers/adapters are flanged for perfect alignment •PART #1201-0055 adapter allows you to use a late-model 11/8” pulley on early-style wheel •PART #s1201-0056 and 1201-0057 spacer/adapter allows the use of any combination of early- or late-style wheel, pulley or sprocket combination •Made in the U.S.A.

1202-0011

1201-0331

NOTE: May require longer bolts. PART # DESCRIPTION FOR 00-06 WHEELS 1201-0053 Pulley/sprocket 1201-00991 Pulley/sprocket FOR 84-99 WHEELS 1201-0149 Pulley/sprocket 1201-0054 Pulley/sprocket 1201-0055 Pulley/sprocket 1201-0056 Pulley/sprocket 1201-0057 Pulley/sprocket 1

SUG. RETAIL spacer (.250” thick) spacer (.100” thick) spacer (.625” thick) spacer (.250” thick) adapter (.075” thick) spacer/adapter (.375” thick) spacer/adapter (.500” thick)

$54.95 54.95 74.95 54.95 54.95 62.95 62.95

Use to install 150 rear tire on 00-06 FLT models.

SHORTY UPPER BELT GUARD •Stylish final belt drive guard

with a stainless steel or chrome finish FRAMES, •Available •Does not include mounting hardware SUSPENSION •Made in the U.S.A. & FENDERS PART # DESCRIPTION FOOTRESTS FOR 86-99 SOFTAIL AND CUSTOM APPLICATIONS Stainless & LICENSE 1202-0018 Chrome PLATE FRAMES 1202-0019 TIRES, TUBES & WHEELS HARDWARE, CHEMICALS UNIVERSAL RIGID BELT GUARD belt guard & TOOLS •Weld-on •For use on any rigid frame COVERS, •Made in the U.S.A. DESCRIPTION SECURITY PART # Rigid belt guard & GENERAL 1202-0077

528

1201-0443

REAR BELT-DRIVE PULLEY INSERTS •Precision-formed, chrome-plated rear pulley inserts •Available in designs to match OEM pulleys DS-325284 •Sold individually PART # DESCRIPTION 1201-0443 For 07-10 FXST, FLST 1202-0011 For 00-06 FXST, FLST (70-tooth) DS-325284 For 84-99 Big Twin (70-tooth) DS-325290 For 84-99 Big Twin (65-tooth) 1201-0444 For 07-10 FXD/FXDWG 1201-0332 For 04-10 XL 1201-0331 For 91-03 XL

SUG. RETAIL $59.95 54.95 44.95 44.95 59.95 54.95 54.95

SUG. RETAIL $37.95 59.95

LOWER BELT GUARD ACCENT •Two-piece accent kit bolts right on with no modifications •Stamped steel with a chrome finish •Sold as a set SUG. RETAIL $32.95

PART # 1204-0034

DESCRIPTION For 00-10 FXST/FLST (except FXCW/C)

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $83.95


SECTION 1202-0063

DS-325199

1202-0064

DS-325204

8

WINDSHIELDS DS-325201

TOURING 1202-0069

LUGGAGE

DS-325205

1902-0174

1902-0175 1202-0071

1902-5123 DS-325206

1202-0070

1202-0072

EXHAUST

CHROME REAR BELT GUARDS 1202-0066

•High-quality stamped-steel upper or lower rear belt guards •Fit a variety of models

SUG. PART # DESCRIPTION RETAIL UPPER BELT GUARDS 1202-0063 For 07-10 FXST/FLST models; repl. OEM #60609-07, 60615-07/B $74.95 1202-0075 For 08-10 FXCW models; repl. OEM #60550-08 52.95 1202-0064 For 06 FXST, FXSTB, FXSTS; repl. OEM #60576-06 74.95 1902-7607 For 00-05 FXST, 00-06 FLST models; repl. OEM #60533-00 54.95 DS-325199 For 93-99 domestic FXST, FLST models and L88-92 international FXST, FLST models; repl. OEM #60537-89 49.95 DS-325204 For 86-92, 94 FXST, FLST models; repl. OEM #60533-86 49.95 DS-325201 For 87-94 FXR, FXRS, FXRS-SP, FXLR, FXRS-CON (not FXRT); repl. OEM #s 60295-87, 60297-87, 91739-87 57.95 1202-0065 For 06 FXDL, FXD35, FXDWG; repl. OEM #60293-06 74.95 1202-0010 For 00-05 FXD/FXDWG/FXDL; repl. OEM #s 60293-00, 60297-00, 60339-00 49.95 1902-0174 For 90-99 FXD, FXDWG models; repl. OEM #60293-90A 79.95 DS-325176 For 85 FXB, FXSB; 85-86 FXWG, 82-84 FLHS Shovelhead; repl. OEM #60388-82 53.95 DS-325205 For 91-99 XL; repl. OEM #60381-91 49.95 1202-0012 For 04-10 XL models; repl. OEM #60367-04 51.95 1902-0175 For 00-03 XL models; repl. OEM #60337-00 59.95

1202-0067

PART # DESCRIPTION LOWER BELT GUARDS 1202-0069 For 07-10 FXST/FLST/FLSTF/FXCW/C; repl. OEM #60452-07A 1202-0076 For 07-08 FLSTC/FLSTN; repl. OEM #60362-07A 1202-0071 For 06 FXST/FXSTB/FXSTS; repl. OEM #60457-06 1202-0070 For 00-05 FXST, 00-06 FLST; repl. OEM #60362-00 DS-325120 For 95-99 U.S. FLST and 94-99 international FLST with 65-tooth rear pulley; repl. OEM #60389-97A DS-325206 For 86-92, 94 FLST; repl. OEM #s 60366-89, 60362-86 DS-325207 For 93 FLST; repl. OEM #60415-89C 1202-0072 For 06-09 FXD/FXDWG; repl. OEM #60356-06, 60356-07 1902-5123 For 91-99 FXD models; repl. OEM #60399-90A 1202-0066 For 04-10 XL; repl. OEM #60413-04 1202-0067 For 04-10 XL; repl. OEM #60413-04; gloss black powdercoat DS-325119 For 91-03 XL; repl. OEM #s 60436-91, 60480-94T

FUEL/AIR SYSTEMS

SUG. RETAIL

ENGINE $59.95 74.95 59.95 59.95 49.95 38.95 49.95 44.95 48.95 69.95 69.95 49.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

CHROME CHAIN GUARDS •Precision-engineered custom chain guards bolt on in minutes •Impressive chrome finish PART # FOR XL DS-325178

SEATS & SISSY BARS

DESCRIPTION

DS-325178

SUG. RETAIL

For 88-E89 XL; repl. OEM #60365-87

$48.95

PART # FOR XL (CONT) DS-325174

DS-325174 DESCRIPTION

SUG. RETAIL

For 83-87 XL; repl. OEM #60375-83

BRAKES

$48.95

TANKS & OIL FILTERS

1201-0503 1202-0046

DASHES & GAUGES

1202-0047

UNIVERSAL CHAIN GUARDS •Chrome chain guards •Comes with brackets •Made in the U.S.A. PART # 1202-0046 1202-0047

1201-0504 DESCRIPTION Left side, 321/2” L Right side, 321/2” L

SPROCKET COVER •High-quality chrome sprocket cover •Sold each PART # DESCRIPTION DS-325288 For 86-90 XL; repl. OEM #34911-81A

SUG. RETAIL $56.95

SUG. RETAIL $54.95 54.95

SPROCKET COVERS •Give your bike that “race-tech” appearance with one of these trick sprocket covers •CNC-milled out of 6061 T-6 billet aluminum to give you a much lighter cover than the heavy stock cast piece •All stand-offs are CNC-machined and mounting hardware is included •Available in your choice of our black or clear anodized finishes •Made in the U.S.A PART # FOR 04-10 XL 1201-0503 1201-0504

DESCRIPTION Black anodized Clear anodized

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $149.95 149.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

529


8 TRANSMISSION & DRIVELINE (transmission) 2010