Page 1

1267


SECTION

21

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS 1701-1001

EXHAUST FUEL/AIR SYSTEMS

1701-1003

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

MOTORCYCLE COVERS •Made of durable 300 x 300 black urethane-coated polyester fabric; all seams are double stitched for added strength •Standard covers feature a plush fabric liner over the handlebar area for added protection to mirrors, fairings and windshields •Chopper covers are lined down the center for added paint protection •All covers are vented with a small signature Drag Specialties logo on the vent flap •Heat-resistant lower panels for protection from exhaust •Elasticized bottom perimeter for a snug fit and lower grommets in the cover for additional security (chopper covers also have adjustable side tethers to ensure a snug fit) •Cover is marked at rear for ease of installation •Includes a 11” x 19” bag for storage •Made in the U.S.A. PART # 1701-1001 1701-1002 1701-1003 1701-1004

DESCRIPTION Chopper cover for custom high neck models w/ extended forks and no sissy bar; up to 111” wheelbase Medium cover for XL and Buell models Large cover for Softail, Dyna and custom models (w/o high neck frame) Extra-large cover for Dresser models (w/ or w/o Tour Pak)

SUG. RETAIL $114.95 84.95 94.95 104.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TRIKE COVER TIRES, •Black urethane-coated 300-denier polyester fabric with UV inhibitors for outside storage liner over the windshield area for added protection TUBES & •Protective •Sewn-in vent to minimize condensation WHEELS •Signature Drag Specialties logo on the windshield area with a sewn-in carry bag conveniently located on the rear of the cover HARDWARE, •Comes •Zipper in rear of cover for easy access to the storage area CHEMICALS •Elasticized bottom perimeter to ensure a snug fit & TOOLS •Heat-resistant fabric in rear to help protect against exhaust heat •Double stitched for added strength COVERS, •115” L x 58” W PART # DESCRIPTION SECURITY •Made in the U.S.A. 4001-0113 Trike cover & GENERAL NOTE: Cover not to be used for trailering

1268

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $159.95


SECTION

21

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS

Navy/Silver Black/Silver

MC902/3/4 DELUXE ALL-SEASON COVERS •Made from a water-resistant, lighter weight, UV-treated Tri-Max® polyester •Ventilation system minimizes condensation build-up and allows constant air circulation Burgundy/Silver •Silver heat resistant lower panels •Snug elastic bottom with one-inch grommets at center and front wheel •Soft windshield liner helps protect against scratching and hazing •Packed into its own attractive carryall •Available in navy/silver, burgundy/silver and black/silver •Sizes to fit every model; sizes M, L, XL and XXL •Not intended for trailering PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION SUG. RETAIL NAVY/SILVER - MC-902 BURGUNDY/SILVER - MC-903 MC902M Medium $39.95 MC903M Medium $39.95 MC902L Large 42.95 MC903L Large 42.95 MC902XL X-large 44.95 MC903XL X-large 44.95 MC902XXL XX-large 49.95 MC903XXL XX-large 49.95

EXHAUST FUEL/AIR SYSTEMS ENGINE PART # DESCRIPTION BLACK/SILVER - MC-904 MC904M Medium MC904L Large MC904XL X-large MC904XXL XX-large

SUG. RETAIL $39.95 42.95 44.95 49.95

DEFENDER® 2000 AND 3000 •Guaranteed 100% waterproof •Made from full-strength UV-treated Tri-Max® polyester •All seams are electronically heat sealed and silver heat resistant lower panels •Perma-Venting® system prevents condensation buildup •Soft windshield panel protector •Snug-fitting elasticized bottom with 1” grommets at center and front wheel •Packed in its own tough backpack •Available in black/silver 2000 and gray/silver 3000 •Available in M, L, XL and XXL PART # DESCRIPTION BLACK/SILVER 2000 D2-500 Medium D2-750 Large D2-1000 X-large D2-1500 XX-large

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

Gray/Silver Black/Silver

CABLES SUG. RETAIL $79.95 84.95 89.95 99.95

PART # GRAY/SILVER 3000 4001-0093 4001-0094 4001-0095 4001-0096

DESCRIPTION Medium Large X-large XX-large

SUG. RETAIL $75.95 79.95 84.95 89.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

Black/Silver

DEFENDER® 400 AND 500 •The Defender® is guaranteed 100% waterproof •Made from a medium-weight, top-quality, UV-treated Tri-Max® polyester •All seams are electronically heat sealed and silver heat resistant lower panels •Soft windshield panel protector •Perma-Venting® system prevents condensation PART # DESCRIPTION build-up and allows constant air circulation BLACK/SILVER 400 •Snug elastic bottom with 1” grommets D4-200 Medium at center and front wheel D4-300 Large •Packed into its own tough zipper D4-400 X-large storage bag with handle D4-500 XX-large •Available in black/silver 400 and gray/silver 500

Gray/Silver

SUG. RETAIL $69.95 74.95 79.95 84.95

PART # DESCRIPTION GRAY/SILVER 500 D5-200 Medium D5-300 Large D5-400 X-large D5-500 X-large

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $69.95 74.95 79.95 84.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1269


SECTION

21

WINDSHIELDS TOURING LUGGAGE SEATS & FC-628 •Guaranteed 100% waterproof SISSY BARS •Made from a medium weight top-quality, UV-treated Tri-Max EXHAUST FUEL/AIR SYSTEMS ENGINE

® polyester •All seams are electronically heat sealed and silver heat resistant lower panels •Soft windshield panel protector •Perma-Venting® system prevents condensation build-up and allows constant air circulation •Snug-fitting elasticized bottom with 1” grommets at center and front wheel •Packed into its own tough backpack •Available in black/silver; sizes M, L and XL •Not intended for trailering PART # DESCRIPTION SUG. RETAIL FC628M Medium $69.95 FC628L Large 74.95 FC628XL X-large 79.95

UV2000 1/2 COVER •Specially treated UV protector nylon •Blocks out over 99% of sun’s harmful rays •100% waterproof and protects against all natural elements •All seams are electronically heat sealed and silver heat resistant lower panels •Sewn-in elastic bungees for universal mounting •Comes in its own fanny pack •When folded, fits into almost any storage compartment •Not intended for trailering •Sizes M, L and XL to fit every bike PART # UV2000M UV2000L UV2000XL

DESCRIPTION Medium Large X-large

SUG. RETAIL $34.95 37.95 39.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

DC-500 DUST COVER •Protect your bike from dust and spills when •Made from a breathable soft non-scratch brushed poly/cotton PART # •Folds to fit in small DC500LG compartment or saddlebag DC500XL for storage DC500XX •Available in light blue

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

garaged DESCRIPTION Large X-large XX-large

SUG. RETAIL $34.95 40.95 44.95

TRK-350 TRIKE COVER •Made of medium-weight Tri-Max® polyester, this is the only trike cover guaranteed to be 100% waterproof •All seams are electronically heat sealed and silver heat resistant lower panels •Exclusive Perma-Venting® system prevents condensation buildup by allowing constant air circulation •50” rear zipper gives access to trunk without cover removal •Snug-fitting, elasticized bottom has 1” grommets in center and at front wheel •Folds into its own carryall •Available in black/silver; one size fits all PART # TRK-350

DESCRIPTION Trike cover

Graphite Black

SUG. RETAIL $109.95

FRAMES, SUSPENSION & FENDERS MC-900/MC-901 ECONO COVERS FOOTRESTS •Guaranteed to be 100% waterproof & LICENSE •Made from ripstop-designed soft PVC PLATE FRAMES •Front, middle and rear grommets for safety tie-downs Sonic Gray •Fully ventilated using the exclusive Cool-Vent system TIRES, •Sized to fit every bike and scooter intended for trailering TUBES & •Not •Available in S, M, L, XL or XXL; choose from graphite black or sonic gray WHEELS SUG. SUG. DESCRIPTION RETAIL PART # DESCRIPTION RETAIL TRK-350D TRIKE HARDWARE, PART # SONIC GRAY - MC-901 DUST COVER CHEMICALS GRAPHITE BLACK - MC-900 MC900S Small $24.95 MC901S Small $24.95 •Protect your trike from dust and spills when garaged & TOOLS MC900M Medium 27.95 MC901M Medium 27.95 •Made from a breathable soft non-scratch brushed poly/cotton 29.95 MC901L Large 29.95 •One size fits most COVERS, MC900L Large 32.95 MC901XL X-large 32.95 PART # DESCRIPTION SUG. RETAIL SECURITY MC900XL X-large 34.95 MC901XXL XX-large 34.95 4001-0010 TRK-350D trike cover $59.95 & GENERAL MC900XXL XX-large

1270

All part numbers in BOLD MAGENTA are new for 2011.


SECTION

21

WINDSHIELDS TOURING GUARDIAN® EZ ZIP MOTORCYCLE COVER •Eliminates hassles associated with putting a cover on a bike or removing it •A zipper located at the rear of the cover makes installation and removal fast, easy and convenient •Constructed of heavy-duty polyester material for long-lasting durability •ClimaShield™ Plus fabric coatings ensure water repellency and UV stability and retard the growth of mildew •Exclusive Moisture-Guard™ venting system prevents the accumulation of unwanted moisture under the cover •Scorch-resistant aluminized heat shield panel allows the cover to be put on the bike before the pipes have cooled •Unique locking grommets facilitate the use of a cable lock to secure your motorcycle •Elastic cord sewn into the hem of the cover ensures a snug fit •Special soft cover liner in the area of the motorcycle windshield protects against possible scratching •EZ On and EZ Off zipper makes installation and removal of the cover hassle-free •Includes convenient storage bag

LUGGAGE SEATS & SISSY BARS EXHAUST 50020-00

FUEL/AIR SYSTEMS PART # 50020-00 50021-00 50022-00

DESCRIPTION X-large XX-large XXX-large

SUG. RETAIL $129.95 134.95 139.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING

4001-0050

HANDLEBARS, CONTROLS & MIRRORS

4001-0055

IMPROVED GUARDIAN® WEATHERALL™ PLUS MOTORCYCLE COVERS •Features four built-in alarm sleeves so you can make your bike more secure by adding Secure Alarm Systems to your cover •Alarms sold separately •Fabricated from heavy polyester with waterproof undercoating and Moisture-Guard™ ventilation system PART # DESCRIPTION SUG. RETAIL •Reinforced grommets for cable or bar locks 4001-0054 Medium $84.95 and elastic bottom rim for snug fit 4001-0050 Large 94.95 •Black with silver side panels; 4001-0051 X-large 105.95 storage bag included

CABLES

PART # 4001-0052 4001-0053 4001-0055

DESCRIPTION XX-large XXX-large Sportbike

SUG. RETAIL $115.95 126.95 104.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

4001-0005

GUARDIAN® SECURE ALARM •Added security for the Weatherall™ Plus cover •Pin-pull alarm emits an ultraloud 130 dB tone when activated by unauthorized movement of the cover •Battery-powered alarm (battery not included) requires no special wiring and installs in minutes; 9V battery required •For all Guardian® Weatherall covers with sewn-in alarm sleeves SUG. PART # DESCRIPTION RETAIL 4020-0030 Secure motorcycle alarm $22.95

GUARDIAN® CUSTOM BIKE INDOOR COVER •Specially designed to fit your custom bike •Constructed of breathable cotton with a napped interior to provide protection from scratches •Sewn-in shock cord on bottom hem ensures a snug fit •Reinforced grommets allow the use of a cable lock; cable lock not included PART # 4001-0005 4001-0006 4001-0059

DESCRIPTION For choppers up to 109” For intermediate choppers up to 96” For choppers up to 124”

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $114.95 110.95 126.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1271


SECTION

21

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

50034-00

PX-200

GUARDIAN DUSTER

GUARDIAN® WEATHERALL •Water-repellent urethane-coated polyester material with aluminized panels to cover hot engine and exhaust pipes •Flannel panel protects windshield from scratches (large, X-large and XX-large only) •Reinforced grommets for cable or bar locks and elastic bottom rim for snug fit •Five sizes fit all motorcycles •Made in the U.S.A. PART # PX-50 PX-100 PX-125 PX-150 PX-200

DESCRIPTION Medium, sport/custom Large, full-dress X-large, small touring/full-dress XX-large, large touring/full-dress XXX-large, large touring

SUG. RETAIL $78.95 84.95 89.95 94.95 99.95

•Store your prized motorcycle inside and keep dirt and dust off •Ideal for indoor storage •Designed to keep the bike clean at an affordable price •Constructed of a soft cotton material that won’t scratch or harm the finish of the motorcycle •Natural cotton materials are breathable to let potentially harmful moisture escape from inside the cover •Elastic cord sewn into the hem of the cover ensures a snug fit •Unique locking grommets facilitate the use of a cable lock to secure your motorcycle •Made in the U.S.A. PART # 50034-00 50035-00 50036-00

DESCRIPTION Medium, sport/custom Large, full-dress XX-large

50008-00

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

SUG. RETAIL $71.95 75.95 85.95

GUARDIAN® STORE AWAY •An inexpensive indoor storage cover that’s intended to replace that old sheet, blanket or tarp •A universal-fit cover that will protect the motorcycle from dust and dirt while it is being stored in a garage •Made of soft material to prevent scratching of the motorcycle’s finish •Breathable fabric to prevent the accumulation of moisture inside of the cover •Two sizes to fit most all motorcycles, including the largest touring models •Made in the U.S.A. PART # 50012-00

DESCRIPTION L, small touring models

SUG. RETAIL $37.95

PART # 50008-00

DESCRIPTION X-large, full-dress models

SUG. RETAIL $44.95

BRAKES TANKS & OIL FILTERS

50037-00

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS 4001-0056 FOOTRESTS GUARDIAN® ULTRALITE™ PLUS MOTORCYCLE COVER •Small, compact design is ideal for longer rides; stores easily anywhere & LICENSE •Lightweight rip-stop polyester fabric construction for enhanced tear PLATE FRAMES and abrasion resistance •Combined UV and water-repellent coating provides protection from TIRES, PVC MOTORCYCLE COVER dirt, pollution and harsh sunlight; two vent flaps expel moisture TUBES & •Basic motorcycle cover constructed of heavy-duty PVC plastic •Sewn-in storage bag on the cover’s interior is a place for storing gloves, to protect the motorcycle from the elements WHEELS •100% PVC construction means a cover that is 100% waterproof sunglasses and other small items •Features full-perimeter elastic on bottom, underbelly straps for a secure •Includes grommets in the hem to allow for the use of a motorcycle HARDWARE, fit, soft interior lining to protect windshields and lockable grommets locking device CHEMICALS •Two for added security sizes to fit most motorcycles SUG. & TOOLS •Made in the U.S.A. PART # DESCRIPTION RETAIL $50.95 DESCRIPTION SUG. RETAIL 4001-0056 Medium, sport bikes, small cruisers w/o windshields COVERS, PART # 55.95 Large, full-dress $25.95 4001-0057 Large, cruisers, touring/sport touring SECURITY 50037-00 57.95 X-large, small touring/full-dress 27.95 4001-0058 X-large, large touring & GENERAL 50038-00

1272

All part numbers in BOLD MAGENTA are new for 2011.


SECTION

21

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS

4001-0023 4001-0032

GUARDIAN® ULTRA LITE

LEG-02

•Lightweight polyester material is waterproof to protect your bike from moisture •Reinforced grommets for cable or bar locks and elastic bottom rim for snug fit •Storage bag included •Three sizes provide great protection for most motorcycles PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION SUG. BLUE/SILVER YELLOW/SILVER (CONT) 4001-0023 Medium, sport bikes/small cruisers w/o windshields $36.95 4001-0033 X-large, cruisers/touring 4001-0024 Large, sport bikes/small cruisers w/o windshields 41.95 GRAY/SILVER 4001-0025 X-large, cruisers/touring 44.95 LEG-01 Medium, sport bikes/small cruisers w/o windshields YELLOW/SILVER 4001-0034 Large, cruisers/touring 4001-0032 Large, sport bikes/small cruisers w/o windshields 41.95 LEG-02 X-large, small touring/full-dress

EXHAUST RETAIL $44.95 37.95 41.95 44.95

GASKETS & SEALS

GUARDIAN® WEATHERALL™ PLUS COVERS

•Protect your bike on the road when you don’t have room for a full-size cover •Traveler covers the essentials, then folds compactly for storage •Tough, lightweight urethane-coated polyester construction; water repellant and quick drying •Will enclose fairing, seat and rear trunk •Includes shock cord hem and footpeg straps •XL size for dressers •Available in gray only PART # LEG03

DESCRIPTION Traveler motorcycle cover

SUG. RETAIL $42.95

•Fabricated from heavy polyester with waterproof undercoating and Moisture-Guard™ ventilation system •Reinforced grommets for cable or bar locks and elastic bottom rim for snug fit •Excellent for all-weather protection or inside storage •Protects windshield with a layer of scratch-resistant lining bonded to the inside of the cover •Two sizes fit motorcycles listed (PART #G-175 fits conversions from Lehman, Motor Trike, Trike Shop and most others) PART # DESCRIPTION SUG. RETAIL 4001-0003 Angled front, small to medium cruisers w/ windshield, sissy bar and saddlebags $94.95 G-175 Trike cover 109.95

SUG. RETAIL $23.95

PART # 3515-0068

SIZE M L M LG LG M LG XL XL XL XL

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

DESCRIPTION Large

DASHES & GAUGES

SUG. RETAIL $25.95

3515-0068

DOWCO COVER APPLICATIONS FITS MODEL BUELL All models EXCELSIOR-HENDERSON Super-X HARLEY-DAVIDSON All Sportsters Dyna Super Glide T-Sport FXDS Dyna Convertible FXDX Dyna Super Glide Sport FLSTF Fat Boy FLHR Electra Glide FLHS Electra Glide Sport FLHT Electra Glide Standard FLHTC Electra Glide Classic

LIGHTING

TANKS & OIL FILTERS

•Available in two sizes to compress any bike cover to its true packed potential •Made from tough, lightweight nylon •Uses four cinch straps and two compression pockets to squeeze cover to minimum size •Small measures 15” x 5”; 6.7” x 5” compressed (works well with Ultra Lite and Traveler series covers) •Large measures 23” x 7.5”; 11” x 7.5” compressed (works well with Weatherall, Weatherall Plus and EZ Zip series covers) DESCRIPTION Small

ELECTRICAL

3515-0067

GUARDIAN® COVER COMPRESSION TOOL

PART # 3515-0067

ENGINE TRANSMISSION & DRIVELINE

G-175

GUARDIAN® TRAVELER™ MOTORCYCLE COVER

FUEL/AIR SYSTEMS

FITS MODEL HARLEY-DAVIDSON (CONT) FLHTC Ultra Classic Electra Glide FLSTC Heritage Softail Classic FLSTN Heritage Softail Special FLTC Ultra Classic Tour Glide FXD Dyna Super Glide FXDB Dyna Daytona FXDC Dyna Glide FXDL Dyna Low Rider FXDS Dyna Convertible FXDWG Dyna Wide Glide FXR Low Rider/FXR Super Glide FXRS Super Glide II FXRT Sport Glide

SIZE XL XL LG XL M M M M XL LG M M LG

FITS MODEL HARLEY-DAVIDSON (CONT) FXST Softail FXSTS Springer Softail FXSTSB Bad Boy FLSTS Heritage Springer FXSTB Night Train FLTR Road Glide FLHR Road King/Classic FXSTD Softail Deuce VRSCA V-Rod INDIAN Scout, Spirit Chief w/o windshield Chief w/ windshield Chief Roadmaster

All part numbers in BOLD MAGENTA are new for 2011.

SIZE M M LG LG LG XL XL LG M L L XL XL

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1273


SECTION

21

WINDSHIELDS

4001-0097

4001-0063

TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

PREMIUM MOTORCYCLE COVERS •Heavy-duty 600-denier polyester construction with polyurethane coating for UV-protection and water-resistance •Vent guard system allows cover to breathe, reducing moisture buildup •Aluminum-coated heat shields allow cover to be used on hot pipes •Windshield area is made of non-abrasive material to prevent scratching •Elastic hems and web tie-down •X-large features hook-and-loop slot in the rear for easy access to luggage and accommodation of dual antennas PART # 4001-0097 4001-0098 4001-0099

DESCRIPTION Medium (up to 95”), for small cruisers and 400cc-600cc sportbikes Large (up to 100”), for cruisers, sport touring and over 600cc sportbikes X-large (up to 104”), for large touring and large cruisers

SUG. RETAIL $69.95

FORM-FIT MOTORCYCLE COVERS •Body-hugging polyester knit outer shell is made with spandex to provide stretch and recovery •Inside the shell is 100% cotton terry loop, sheared to a luxurious fleece finish so it won’t mar painted or finished surfaces •Follow every curve of your bike for a truly custom fit •For indoor use only •Available in black PART # 4001-0062

69.95 4001-0063 73.95

DESCRIPTION For choppers and custom bikes up to 10’ long w/ backrest and/or sissy bar For choppers and custom bikes up to 10’ long w/o backrest or sissy bar

SUG. RETAIL $232.95 220.95

XM-101X

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1274

READY-FIT MOTORCYCLE COVERS •Covers give a custom tailored fit, excellent protection and have a rich, deep color that resists fading •Waterproof, dustproof urethane-coated polyester fabrics reflect heat and protect from the sun, dust, bird and tree droppings, industrial pollutants and even salt air •Heat-shield aluminized inner lining protects cover from hot pipes and engine •Windshields and rear fenders are protected from scratches by a soft fabric inner lining •Screened air vent lets condensation and heat escape to further protect bike •Overlapped, double-stitched seams for strength and water resistance •Cover tucks into sewn-in bag for easy storage and transportation •Theft-resistant, hardened-steel cable reinforced grommets •Elastic in front and rear hems to hold cover in place •Great packaging with features and benefits right on the box PART # DESCRIPTION SUG. RETAIL XM-100 FLHTC, FLHTCU, FLTC, FLTCU $110.95 PART # DESCRIPTION SUG. RETAIL XM-101X FLSTN, FXDS, FXRT, FXRS-Conv. 103.95 CABLE AND LOCK FOR COVERCRAFT® COVERS XM-104X XL, XLCH, XLH, XLS 86.95 ZCML 30” security cable and lock $8.95

ZCML

4001-0102

MOTORCYCLE COVERS •Full size, lightweight cover •Polyester construction with an elastic hem •Available in black PART # 4001-0102 4001-0103 4001-0104

DESCRIPTION Medium, fits small cruisers without windshield and sport bikes Large, fits large cruisers, Touring and Sport Touring models X-large, fits large Touring bikes

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $27.95 31.95 37.95


SECTION 4001-0092

4001-0091

21

4001-0089

WINDSHIELDS 4001-0090

4001-0114

TOURING LUGGAGE SEATS & SISSY BARS

ULTRAGARD® CLASSIC II COVERS •Water-resistant, lightweight, polyurethane-coated polyester construction •UV stability prevents material breakdown and fading •Scorch-resistant exhaust protection •Elastic hem •SoftTek windshield protection •Ultragard® vent system •High-visibility logo and piping PART # DESCRIPTION 4001-0091 Charcoal/black, full dresser 4001-0092 Red/black, full dresser 4001-0114 Black/charcoal, full dresser 4001-0115 Sand/black, full dresser

HALF COVER

EXHAUST

•Compact motorcycle cover is ideal for traveling; takes up far less storage space than full cover •Covers seat, windshield and front of bike •Expandable windshield pocket •Universal fit SUG. RETAIL $65.95 65.95 65.95 65.95

PART # 4001-0089 4001-0090

DESCRIPTION Black Gray

SUG. RETAIL $37.95 37.95

TRANSMISSION & DRIVELINE GASKETS & SEALS

GAS TANK PROTECTOR •Mechanic’s apron for tanks •Keeps gas tanks from getting scratched or dinged while working on bikes; also has convenient pouches for holding tools, parts, etc. •Soft, non-marring material makes contact with tank; durable Naugahyde® outer material looks like leather •Hook-and-loop straps hold it in place •Made in the U.S.A. DESCRIPTION Gas tank protector

•Tough, lightweight protectors that guard against dents and scratches when the bike is being worked on •Padded for additional scratch protection SUG. RETAIL $26.95

SUG. RETAIL $26.95

SUG. RETAIL $59.95

2130-0030

HEAT DEMONS HARNESSES AND SWITCHES PART # 2130-0030 2130-0031 2130-0032 2130-0033 2130-0034 2130-0035

SUG. RETAIL $18.95 20.95 20.95 22.95

PART # 0616-0114

DESCRIPTION HeatControl w/ USB charger

2130-0031

SUG. RETAIL $67.95

2130-0034 2130-0033

DESCRIPITON 44” battery cable w/ 15A fuse for use w/ apparel or seat heater; connect w/ the Y-plug splitter; on/off switch assembly 12” female DC/RCA harness to be used w/ any 12 Volt RCA connector 12” male DC/RCA harness to be used w/ any 12 Volt RCA connector 9.25” harness splitter; connects to battery cable w/ fuse to be able to plug in two items 8” on/off in-line switch; connects to battery cable w/ fuse to switch off the heat of any item when not needed 8” on/off in-line switch; includes PART #2130-0030 and 2130-0034

All part numbers in BOLD MAGENTA are new for 2011.

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

•Use with heated clothing, heated grips, heated seats or other items •Five temperature levels with indicators •Includes USB port for charging accessories like MP3, MP4 or cell phones •Convenient clip to attach to belt, pocket, straps or also designed for surface mounting •Water-resistant design with microprocessor circuitry for precise temperature control •Compatible with connectors on most heated clothing or adaptors are available •Capacity to adjust heat levels of products drawing up to 70W •A cable with fuse included to connect to vehicle battery •Ideal for hunters, farmers, winter activities, and recreation with a snowmobile, ATV or motorcycle

•Designed specifically for motorcycle seats or back rest 7.5” x 9” •Keeps you comfortable on those cold rides •Ultra thin and flexible carbon fiber heating element •Easy to install under the seat cover •Durable and long lasting •Includes disconnect cable for easy seat removal •Connect to Power Demon, HeatControl or on/ off switch (sold separately) DESCRIPTION Seat warmer

PART # DESCRIPTION FRONT FENDER PROTECTOR 1405-0006 Narrow fenders 1405-0007 Wide fenders TANK PROTECTOR 3502-0043 Small cruisers 3502-0044 Large cruisers/touring

HEATCONTROL WITH USB CHARGER

SEAT WARMER

PART # 0631-0057

ELECTRICAL

GUARDIAN® PROTECTORS

FENDER COVER •Foam construction •Protects paint and chrome •Full-sized design wraps around large Dresser front fenders PART # DESCRIPTION 3502-0125 Fender cover

ENGINE

1405-0007

3502-0043

PART # H50502BK

FUEL/AIR SYSTEMS

SUG. RETAIL $10.95 7.95 7.95 7.95 14.95 19.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1275


SECTION

21

WINDSHIELDS

Step 1: “Roll in”

Step 3: “Close the jaws”

Step 2: “Step off: bike stays upright!”

TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE JAWS® TRANSMISSION CYCLE •Stabilizes the front wheel of a motorcycle for trailer transportation & DRIVELINE •Easy as 1-2-3 for one-person operation

GASKETS & SEALS ELECTRICAL LIGHTING

•Maximum tire contact for maximum security; adjusts to the exact size of the tire •Effortless motorcycle removal, with no bulky hardware to roll over •No pinch points to wear and deform the tire’s sidewalls •Smooth, easy clamping motion on tire widths from 3” to 61/2” W •Can quickly and easily be removed from the truck or trailer; tie-downs recommended •Adjustable tire locater prevents damage to valuable rotors and rims •Heavy-duty thick-wall yellow zinc-plated steel construction so Cycle Jaws will withstand the test of time •Can be used free-standing for use on garage floors, driveways and racetrack pits •Additional mounting kit (floor plates and hardware) available separately •Made in the U.S.A. WARNING: Do not ride motorcycle on ramp at any time. PART # 4101-0059

DESCRIPTION Cycle Jaws

SUG. RETAIL $289.95

PART # 4101-0208

DESCRIPTION Mount kit

SUG. RETAIL $28.95

HANDLEBARS, CONTROLS & MIRRORS CABLES WHEEL CHOCK

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1276

•Ideal for trailering your motorcycle, motorcycle maintenance, and motorcycle storage •Never suffer another accidental tip over •Use it with a trailer or pick-up truck for safe transportation of your motorcycle •It can also be used in your garage or shop PART # •Trailer mounting 3911-0039 hardware included

DESCRIPTION Wheel chock

SUG. RETAIL $209.95

CYCLE DOCK •Avoid the back-breaking work of loading and unloading bikes with the Cycle Dock •Pivot mechanism uses the weight of the bike to keep it upright for easy loading and unloading on a trailer or pickup truck bed •Rails mount to trailer deck or pickup bed, which allows you to easily slide the dock and your bike into position •Can be completely removed when the space is needed for other purposes •Two rockers (wide and narrow), cradle stop (upright), mounting plate, support arm (with eyelets and adjustable feet) and two mounting rails are included •Heavy-duty stand provides long-lasting service NOTE: Tie-down recommended. PART # 36-0310

All part numbers in BOLD MAGENTA are new for 2011.

DESCRIPTION Cycle Dock kit

SUG. RETAIL $278.95


SECTION

21

WINDSHIELDS CHOPPER WHEEL CHOCKS •Capable of accommodating all Chopper front wheel sizes and makes tying down a motorcycle simple and easy for one person •Available in two cradle choices: one for the 120 wide tire and another for the 80-90 wide tire •Patented locking mechanism effortlessly and securely supports motorcycle in an upright position •Works on all low fender bikes •Can be used on pavement, concrete, dirt, sand, gravel and also trailers and pickup trucks •Mounted on a trailer it easily snaps on and off (with included trailer adapter kit); in a pickup truck, it may be used free standing •Self locking and folds to become compact •Weighs only 26 lb. •Upright dimensions: 25” L x 9” W x 15” H; folded dimensions: 25” L x 9” W x 6” H •Made in the U.S.A. PART # 4101-0138 4101-0139

DESCRIPTION For 80-90 wide front tire For 120 wide front tire

Rear view

TOURING

4101-0138

LUGGAGE SEATS & SISSY BARS EXHAUST

SUG. RETAIL $314.95 314.95

4101-0139

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

4101-0135

PIT STOP/TRAILER STOP WHEEL CHOCK

LIGHTING

•Fully adjustable wheel locking system; holds bikes weighing up to 2,400 lb. •Accommodates front or rear wheel sizes from 15”-22” and 80-220mm wide •Patented locking mechanism effortlessly and securely supports motorcycle in an upright 4101-0136 position on the ground or on a trailer •Makes tying down the motorcycle for transport a simple task •Works on pavement, gravel, concrete, dirt or even sand •Use as a work stand or trailer chock •Trailer adapter kit quickly and easily attaches to trailer or pickup beds •Folds down for easy storage; weighs just 21 lb. •Upright dimensions: 30” L x 29” W x 15” H; PART # DESCRIPTION SUG. RETAIL folded dimensions: 4101-0135 Pit Stop/Trailer Stop $249.95 30” L x 29” W x 6” H 4101-0136 Trailer Stop adapter kit 21.95 •Made in the U.S.A.

TRAILER ONLY WHEEL CHOCK STAND •Fully adjustable wheel locking system; accommodates front and rear wheel sizes from 15”-22”/80-220mm wide •Patented locking mechanism effortlessly and securely supports motorcycle in an upright position on all transport platforms •As a trailer chock it easily snaps on and off all transport platforms; attaching and detaching the unit takes only a few seconds •Makes tying down a motorcycle a simple and an easy task for one person •Accommodates bikes weighing up to 3,000 lb.; folds down for easy storage and weighs just over 26 lb. •Dimensions upright are 25” L x 9” W x 15” H; dimensions folded are 25” L x 9” W x 7” H •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 4101-0137 Trailer only wheel chock stand $184.95

UNIVERSAL E-TRACK ADAPTER KIT

3911-0014 3911-0015

•Designed to hold the front wheel •Mount to the bed of any truck, van or trailer •Chrome plated to look as good as they work •PART #3911-0015 5” sport chock features a special bend to accommodate disc brakes; this applies to Buells, etc. •Quick mount and release kits allow for easy installation and removal of wheel chocks; sold separately •Chocks and quick mount/release kits sold each •Made in the U.S.A. PART # WHEEL CHOCKS 3911-0012 3911-0011 3911-0015 3911-0014

DESCRIPTION

SUG. RETAIL

31/2”, fits tire widths up to 31/2” 5”, fits tire widths up to 5” 5” sport, fits tire widths up to 5” 61/2”, fits tire widths up to 61/2”

$29.95 29.95 29.95 29.95

PART # DESCRIPTION QUICK MOUNT/RELEASE KITS 3911-0018 For 31/2” wide chocks 3911-0017 For 5” wide chocks 3911-0019 For 61/2” wide chocks

All part numbers in BOLD MAGENTA are new for 2011.

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

•Made of heavy-duty plated steel and designed for use with Condor Chock PART #s 4101-0135, 4101-0137, 4101-0138, 4101-0139 and 4101-0140 •Allows chocks to quickly and securely attach to E-Track on any trailer platform •Adjusts chock anywhere along E-Track for maximum flexibility and adjusts side-to-side between 27” and 46” wide •Includes all necessary hardware, including Boomerang Bar for PART # DESCRIPTION SUG. RETAIL added stability $78.95 NOTE: Ratchet tie-downs are required for transporting the motorcycle. 3911-0038 Universal E-Track adapter kit

CHROME WHEEL CHOCKS

HANDLEBARS, CONTROLS & MIRRORS

SUG. RETAIL $28.95 28.95 28.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1277


SECTION

21

WINDSHIELDS TOURING DS-390095

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

REMOVABLE WHEEL CHOCKS

3911-0001

•Stabilize the front wheel of a motorcycle for trailer transportation •Wheel chocks can easily be removed when not in use •Chocks are made of thick-wall steel tube construction and feature a chrome finish •6.5” wheel chock has clearance for motorcycles with large rotors and is designed with a three-bend radius that will keep any width tire centered in the chocks 3911-0001 •Mounting brackets remain fastened while the chocks are easily removed by unscrewing the T-bolt hold-down screw •Additional mounting kits may be purchased separately, enabling you to move the chock from one surface to another without removing the mounting brackets DS-380149 •Wheel chock mounting brackets are patented •If it doesn’t say “Pingel®,” it isn’t the real thing 3911-0033 •Made in the U.S.A. SUG SUG PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL DS-390095 3.5” – fits tire widths up to 3.5” (w/ mounting kit) $68.95 3911-0033 Mounting kit only w/ T-bolt and threaded insert (ea.) $27.95 3911-0001 6.5” – fits tire widths up to 6.5” (w/ mounting kit) 68.95 DS-380149 Repl. T-Bolt w/ threaded insert (ea.) 5.95

REMOVABLE WHEEL CHOCKS FOR SERIES E TRACK

3920-0132

•Stabilize the front wheel of a motorcycle for trailer transportation •Chock fits securely into recessed or floor-mounted 3911-0008 Series E Tracks •Wheel chocks are made of thick-wall steel tube construction and feature a chrome finish •Lets you move your wheel chock and bike virtually anywhere along the Series E Track for the best position to accommodate multiple bikes, trikes or choppers, giving optimum space utilization •6.5” wheel chock has clearance for motorcycles with large rotors and is designed with a three-bend radius that will keep any width tire centered in the chock •Patented mounting bracket •Tie-down fitting installs into Series E Track in seconds; moves along the track for perfect tie-down angle •If it doesn’t say “Pingel®,” it isn’t the real thing •Made in the U.S.A. PART # 3911-0006 3911-0007 3911-0008

DESCRIPTION Floor mount for tire widths up to 3.5” Recess mount for tire widths up to 3.5” Floor mount for tire widths up to 6.5”

SUG.RETAIL $158.95 158.95 158.95

PART # DESCRIPTION 3911-0009 Recess mount for tire widths up to 6.5” 3920-0132 Tie-down fitting kit (ea.)

SUG.RETAIL $158.95 19.95

3911-0002

TANKS & OIL FILTERS DASHES & GAUGES DS-380137

3911-0003

FRAMES, SUSPENSION REMOVABLE WHEEL CHOCKS FOR CORRUGATED OR TRAILER FLOORS & FENDERS PERMANENT WHEEL CHOCKS •Stabilize the front wheel of a motorcycle for trailer transportation •Stabilize the front wheel of a motorcycle •Removable chock is made of thick-wall steel tube construction and has a chrome finish FOOTRESTS for trailer transportation •Unique mounting bracket is designed to use either the 3.5” or 6.5” Pingel removable & LICENSE •Chrome wheel chocks are designed to be wheel chock •6.5” wheel chock has clearance for motorcycles with large rotors and is designed with a PLATE FRAMES fastened down and stay in one place •Available in two sizes to fit a large variety three-bend radius that will keep any width tire centered in the chock of motorcycles TIRES, •Only the mounting bracket fastens to the trailer, truck or van TUBES & •6.5” chock has clearance for motorcycles with •Easy removal of the chock when not in use large rotors and is designed with a three-bend •If it doesn’t say “Pingel ,” it isn’t the real thing WHEELS radius that will keep any width tire centered •Mounting brackets used with wheel chocks are patented •Made in the U.S.A. HARDWARE, in the chock SUG. SUG. SUG. CHEMICALS •Made in the U.S.A. DESCRIPTION RETAIL PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL & TOOLS PART # DS-380173 3 .5” – fits tire widths DS-380136 3.5” – fits tire widths up to DS-380137 Additional mounting plate kit for corrugated floors (ea.) $59.95 up to 3 .5” $44.95 3.5” (w/ mounting kit) $115.95 COVERS, 3911-0003 6.5” – fits tire widths up to SECURITY 3911-0002 6.5” – fits tire widths up to 6.5” 45.95 6.5” (w/ mounting kit) 115.95 & GENERAL ®

®

1278

All part numbers in BOLD MAGENTA are new for 2011.


SECTION

21

3911-0023

WINDSHIELDS

LOCK CHOCKS

3911-0030 3911-0027

LOCK CHOCK SEPARATES •Prepare your trailer with T-bases and use the right chock for the day’s haul •All chocks are interchangeable on the same T-base plate •Made in the U.S.A. PART # 3911-0028 3911-0029 3911-0030 3911-0027

DESCRIPTION 3.5” Chock and security pin 5.5” Chock and security pin 6.5” Chock and security pin T-base plate and mounting hardware

SUG. RETAIL $49.95 64.95 64.95 34.95

•Chock includes a security pin that can be used to lock your bike to the chock (padlock 3911-0024 not included) •Flush-mount 3911-0025 T-base fits all trailers and truck beds with no hassle of aligning separate cleats •Chock mounts to base at four points for strength and stability •Ultra-durable powder-coat finish •Large models fit street/supermoto machines and provide clearance for all disc brakes •All mounting hardware and instructions included •Made in the U.S.A. PART # 3911-0023 3911-0024 3911-0025

DESCRIPTION 3.5” 5.5” 6.5”

SUG. RETAIL $74.95 89.95 89.95

3911-0034

•Does not require any mounting hardware •Non-slip rubber pad on the bottom plate ensures the chock stays put •Plate and tab strap design secures your bike in place •Sold each PART # 3911-0035 3911-0036 3911-0037

3911-0035

DESCRIPTION 3.5” W 5.5” W 6.5” W

SUG. RETAIL $49.95 59.95 59.95

•Patented lock ‘n load system uses high-strength aircraft-style track for attachment to trailer •Reinforced, powder-coated tubular steel; solid base plate and aircraft fasteners provide superior strength •Universal design works on both ribbed truck beds and flat floor trailers •Fits wheel sizes from 31/2” W to 51/2” W •Includes necessary hardware and instructions PART # •Accessory mounting kit allows chock 3911-0026 to be used in more than one vehicle 3911-0034 •Made in the U.S.A.

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

TRANSMISSION & DRIVELINE GASKETS & SEALS 3911-0026 DESCRIPTION Track Star wheel chock Accessory mounting kit

ELECTRICAL SUG. RETAIL $82.95 15.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

58” BOX BAR •This combination tie-down/wheelstabilizer bar bolts to the front of your pickup box at any height to clear even the lowest fenders •Prevents your front wheel from turning to the side and bending out the front of your box when strapping down your bike •Mounting hardware and instructions included •For full-size pickups PART # •Sold each 8000-1100 •Made in the U.S.A.

CABLES BRAKES DESCRIPTION 58” Box Bar

SUG. RETAIL $84.95

TANKS & OIL FILTERS DASHES & GAUGES

MOTORCYCLE LOADING RAMPS •Heavy-duty steel ramps feature handy 72” L and two widths •950 lb. load capacity •Made in the U.S.A. SUG. PART # DESCRIPTION RETAIL 8000-7100 6” W $89.95 8000-7105 10” W 119.95

8000-7100

8000-7100

8000-7105

8000-7105

FOLDING ALUMINUM MOTORCYCLE RAMP •Folds to carry like a briefcase •1,000-lb. capacity •UPS shippable; only 25 lb. •Never rusts; 100% aluminum •Dimensions: 8’ L x 121/2” W (extended); 521/2” L x 121/2” W x 4” D (collapsed)

LUGGAGE

ENGINE

TRACK STAR™ WHEEL CHOCK

EZ CHOCK

TOURING

PART # MC1296

DESCRIPTION Folding ramp

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $209.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1279


SECTION

21

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1” STANDARD TIE-DOWNS

1.5” RATCHET TIE-DOWNS

•4,500-lb. test nylon webbing •Industrial-grade cam buckle •3/8” heavy-duty vinyl-coated hooks •1,200-lb. assembly strength •Hand loops for pulling tight •6’ long •Double security stitching •Sold in pairs •Made in the U.S.A.

•6,000-lb. test nylon webbing •Includes vinyl-coated safety hooks at both ends that will not come un-hooked •1,500-lb. assembly strength •6’ long •Double security stitching •Sold in pairs •Made in the U.S.A. PART # 3920-0181

DESCRIPTION 1.5” ratchet tie-downs

SUG. RETAIL $34.95

PART # 3920-0180

DESCRIPTION 1” standard tie-downs

SUG. RETAIL $17.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING

SOFT-TIE 18” EXTENSIONS

PLUSH SOFT-TIE COVERS

•Perfect for bars or secure areas too thick for hooks •Won’t scratch paint or chrome •Available in 1” or 1.5” widths •Sold in pairs •Made in the U.S.A.

•Slide over existing 1” or 1.5” tie-down extensions to guard against scratching paint or chrome •12” long •Sold in pairs •Made in the U.S.A. PART # 3920-0184

DESCRIPTION Plush Soft-Tie covers

SUG. RETAIL $6.95

PART # 3920-0182 3920-0183

DESCRIPTION 1” x 18” w/ 4,500-lb. test nylon webbing 1.5” x 18” w/ 6,000-lb. test nylon webbing

SUG. RETAIL $5.95 8.95

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

11/2” ENDLESS RATCHET TIE-DOWNS •Designed to secure the back end of bikes via the swingarm where the distance from floor to frame is very short •Durable extra security stitching •Black color; 11/2” wide webbing and ratchet •6,000-lb. test nylon webbing; 800-lb. rated assembly •Sold in pairs •Made in the U.S.A. PART # 3920-0196 3920-0197

RETRACTOR-1 TIE-DOWNS

3920-0196

DESCRIPTION 4’ L 8’ L

3920-0197

FRAMES, SUSPENSION & FENDERS FOOTRESTS 1” RATCHET SOFT-TYE & LICENSE WITH •Intended for middlePLATE FRAMES weight snowmobiles, bikes, ATVs, PWC and shop equipment TIRES, •Industrial-grade PowerTye ratchet TUBES & •Sewn-in soft-tye test nylon webbing WHEELS •4,500-lb. •3/8” heavy-duty vinyl-coated hooks HARDWARE, •700-lb. working load security stitching CHEMICALS •Double 1/2’ length & TOOLS •6 •Sold in pairs COVERS, •Made in the U.S.A. DESCRIPTION SECURITY PART # 1” Ratchet w/ soft-tye & GENERAL 3920-0048

1280

SUG. RETAIL $15.95 20.95

•Automatic retracting strap allows for easy setup and removal •Ratchet allows for precision tension control •Snap hooks ensure a solid fitting no matter what the conditions •1” W black webbing •7’ L •Assembly rated to 2,000 lb. •Sold in pairs •Made in the U.S.A. PART # 3920-0121

DESCRIPTION Retractor-1 tie-downs

11/2” BACK-END RATCHET TIE-DOWN •Designed especially to secure the back end of custom bikes (via the swingarm) where the distance from floor to frame is very short •Wraparound area on bike where no hooking point is available •Ratchet length can be made as short as 9” •54” L •Adjustable sheepskin sleeve •Sold in pairs •Made in the U.S.A. NOTE: May require the use of a Soft-Tye for some applications. SUG. RETAIL $32.95

PART # 3920-0029

DESCRIPTION SUG. RETAIL Back-end ratchet tie-down $28.95

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $67.95


SECTION

21

WINDSHIELDS NEOPRENE RATCHET COVER

3920-0047 3920-0281

1” RATCHET

DESCRIPTION 1” Ratchet (pr.) 1” Ratchet (ea.)

SUG. RETAIL $29.95 (pr.) 13.95 (ea.)

1” HEAVY-DUTY RATCHET •Heavy-duity vinyl-coated secure latch hooks •Industrial-grade PowerTye ratchet •4,500-lb. test nylon webbing •700-lb. working load •Double security stitching •12’ length •Made in the U.S.A. PART # 3920-0285

PART # 3920-0291 3920-0292 3920-0293

3920-0037

3920-0035

DESCRIPTION Black Red Blue

SUG. RETAIL $18.95 18.95 18.95

3920-0293 SUG. RETAIL $22.95 22.95 22.95

3920-0038

3920-0039

ENGINE TRANSMISSION & DRIVELINE

LIGHTING 3920-0040 3920-0041

3920-0042

3920-0043

•Original PowerTye design features sewn-in soft-tye •4,500-lb. test nylon webbing •3/8” heavy-duty vinyl-coated hooks •Industrial-grade Powertye cam-buckle •400-lb. working load •Hand loop for pulling tight •51/2’ length plus soft-tye •Double security stitching •Sold in pairs •Made in the U.S.A. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION 3920-0038 Black/black $21.95 3920-0041 Black/silver 3920-0039 Black/red 21.95 3920-0042 Black/green 3920-0040 Black/blue 21.95 3920-0043 Black/yellow

HANDLEBARS, CONTROLS & MIRRORS CABLES

SUG. RETAIL $21.95 21.95 21.95

3920-0147

SUG. RETAIL $35.95 35.95 35.95

2” BIG DADDY TRAILER KITS •2” wide heavy-duty ratchet with ergonomic rubber handle •Genuine sheepskin sleeve •Black webbing Soft-Tye sewn-in •7,400-lb. test nylon webbing •Heavy-duty vinyl-coated secure hooks •1,200-lb. working load •Double security stitching •61/2’ length •Includes heavy-duty Cordura storage bag with zipper top closure •Made in the U.S.A. PART # 3920-0288

DESCRIPTION Black

SUG. RETAIL $109.95

All part numbers in BOLD MAGENTA are new for 2011.

3920-0289

PART # 3920-0289

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

3920-0288

•11/2” ratchet tie-downs with vinylcoated secure hook ends •6,000-lb. test nylon webbing; 1,000-lb. working load •Double security stitching •61/2’ L •Sold in pairs •Made in the U.S.A. DESCRIPTION Red Black Blue

3920-0292

DESCRIPTION Red Black Blue

3920-0146

RATCHET WITH SAFETY LATCH HOOKS

FUEL/AIR SYSTEMS

1” SOFT-TYE TIE-DOWNS

•4,500-lb. test nylon webbing •Industrial-grade PowerTye cam buckle •3/8” heavy-duty vinyl-coated hooks •400-lb. working load •Hand loops for pulling tight •51/2’ length •Double security stitching •Sold in pairs •Made in the U.S.A.

11/2”

EXHAUST

ELECTRICAL

1” STANDARD TIE-DOWNS

PART # 3920-0145 3920-0146 3920-0147

•Secure latch hook with vinyl-coated S-hook •1” wide cam buckle •Integrated hand loop for easy adjustment •4,500-lb. test nylon webbing •400-lb. working load •Double security stitching •51/2’ length •Sold in pairs 3920-0291 •Made in the U.S.A.

SEATS & SISSY BARS

SUG. RETAIL $18.95

3920-0036

3920-0145

SUG. RETAIL $15.95

GASKETS & SEALS

DESCRIPTION 1” heavy-duty ratchet

PART # 3920-0035 3920-0036 3920-0037

LUGGAGE

1” CAM BUCKLE WITH SOFT-TYE SEWN-IN

•Intended for middle-weight bikes, snowmobiles, ATVs, PWC and shop equipment •Industrial-grade PowerTye ratchet •4,500-lb. test nylon webbing •3/8” heavy-duty vinyl-coated hooks •700-lb. working load •Double security stitching •6’ length •Made in the U.S.A. PART # 3920-0047 3920-0281

TOURING

•Keeps the metal ratchet from damaging paint and chrome •Also keeps excess webbing together •Makes the ratchet stay in the locked position •Will fit 1” to 2” strap •PowerTye logo •Patent pending PART # DESCRIPTION •Sold in pairs 3920-0052 Ratchet cover •Made in the U.S.A.

DESCRIPTION Orange

SUG. RETAIL $109.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1281


SECTION

21

WINDSHIELDS

3920-0137

3920-0173

TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

3920-0138

11/2” FAT STRAP DELUXE

3920-0174

•11/2” W Chromacoat ratchet •Vinyl-coated with safety latch hooks •Sewn-in sheepskin Soft-Tye •6,000-lb. test nylon webbing •1,000-lb. working load •61/2’ length •Double security stitching •Sold in pairs •Made in the U.S.A. PART # 3920-0173 3920-0174

FAT STRAP TRAILER KITS

DESCRIPTION Black Orange

3920-0010

SUG. RETAIL $40.95 40.95

3920-0011

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

PART # 3920-0137 3920-0138

3920-0172

BIG DADDY’S TIE-DOWNS •Feature 7,400-lb. test nylon and 2,600-lb.-rated assembly •2” W with a choice of quick-lock buckle or ratchet •Available with vinyl-coated snap-hook ends with or without sewn-in Soft-Tye, or vinyl-coated snap hook with 3/8” S-hook bar end •Measure 61/2’ L •Sold in pairs •Made in the U.S.A. PART # 3920-0010 3920-0011 3920-0172 DS-110213 DS-110215

DESCRIPTION Ratchet w/ two snap-hook ends Ratchet w/ two snap-hook ends and sewn-in sheepskin Soft-Tye; black Ratchet w/ two snap-hook ends and sewn-in sheepskin Soft-Tye; orange Rachet w/ snap-hook/S-hook end combination Quick-lock w/ snap-hook/S-hook end combination

SUG. RETAIL $43.95 54.95 54.95 38.95 33.95

3920-0139

CABLES

•Everything needed for a secure tie-down •Kits include two pair of Fat Strap 11/2” deluxe ratchet tie-downs with genuine sheepskin sleeve and vinyl-coated secure hook ends •6,000-lb. test nylon webbing; 1,000-lb. working load •Double security stitching •61/2’ L •Include heavy-duty Cordura® nylon storage bag with zipper top closure •Made in the U.S.A. DESCRIPTION Black Orange

CLASSIC TRAILER KIT •1” wide industrial-grade PowerTye ratchet •Black webbing Soft-Tye sewn in •4,500-lb. test nylon webbing •Vinyl-coated latch hooks •Double security stitching •700-lb. working load •61/2’ length •Includes two pair 1” PowerTye ratchet tie-downs and heavy-duty Cordura storage bag with zipper top closure •Made in the U.S.A. PART # 3920-0290

DESCRIPTION Classic trailer kit

3920-0142

3920-0140

3920-0144

11/2” CAM-BUCKLE WITH TANKS & SAFETY-LATCH HOOKS OIL FILTERS AND SOFT-TYE •6,000-lb. test nylon webbing; 800-lb. working load •Double security stitching and sewn-in soft-tye •6’ L •Sold in pairs •Made in the U.S.A.

11/2” CAM-BUCKLE WITH SAFETY LATCH HOOKS

FRAMES, SUSPENSION PART # DESCRIPTION Black/red & FENDERS 3920-0139 3920-0140 Black/black FOOTRESTS 3920-0141 Black/blue & LICENSE PLATE FRAMES 11/2” RATCHET/CAM STRAPS •Great for single-person loading TIRES, •Quick-adjusting with ratchet and easy TUBES & release with cam buckles WHEELS •6,000-lb. test strength; 400 lb. workload per strap HARDWARE, •61/2’ L CHEMICALS •Integrated Soft-tye with plush cover & TOOLS •Sold in pairs COVERS, •Made in the U.S.A. DESCRIPTION SECURITY PART # 11/2” ratchet/cam strap & GENERAL 3920-0175

1282

SUG. RETAIL $54.95

3920-0143

BRAKES

DASHES & GAUGES

SUG. RETAIL $89.95 89.95

3920-0141 SUG. RETAIL $24.95 24.95 24.95

•11/2” cam-buckle tie-downs with vinyl-coated safety latch hooks •6,000-lb. test nylon webbing; 800-lb. working load •Double security stitching •51/2’ L •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION 3920-0142 Red 3920-0143 Black 3920-0144 Blue

SUG. RETAIL $24.95 24.95 24.95

WHEEL STRAP •Lightweight spring buckle •4,500-lb. test nylon webbing •Wheel protector keeps buckle from scratching rims •3’ L •Sold each •Made in the U.S.A. SUG. RETAIL $52.95

PART # 3920-0282

All part numbers in BOLD MAGENTA are new for 2011.

DESCRIPTION Wheel strap

SUG. RETAIL $4.95


SECTION

21

3920-0050

WINDSHIELDS 3920-0049

1” SOFT-TYE/EXTENSIONS

PART # 3920-0049 3920-0050 3920-0051 3920-01201 1

3920-0051

DESCRIPTION Black Red Blue Black

SUG. RETAIL $6.95 6.95 6.95 6.95

Measures 12” L.

3920-0012

SHEEPSKIN SOFT-TYES •1.5” Soft-Tyes have 6,000-lb. test, and 1” Soft-Tyes have 4,500-lb. test nylon •18” L and has a 9” L sheepskin sleeve to protect paint and chrome •Reusable storage pouch •Sold in pairs •Made in the U.S.A. PART # 3920-0012 3920-0013 DS-110217

•Provide convenient hooking points to attach a tie-down •Include soft plush cover to protect tank and neoprene grip guards •Adjustable for any size bike •Sold in pairs PART # DESCRIPTION 3920-0178 Handlebar Handcuff

LUGGAGE SUG. RETAIL $25.95

PLUSH SOFT-TYE COVERS •Slide over existing 1” or 11/2” tiedown extensions to guard against scratching paint or chrome •Strap not included •12” long •Sold in pairs •Made in the U.S.A. PART # 3920-0136

EXHAUST

DESCRIPTION Plush soft-tye covers

SUG. RETAIL $7.95

DS-110217 SUG. RETAIL $21.95 9.95 18.95

•Hook-and-loop straps used to secure jackets, bags, packs, etc. to bike •Sold each •Made in the U.S.A. PART # 3920-0283 3920-0284

TRANSMISSION & DRIVELINE

DESCRIPTION 30” L 48” L

SUG. RETAIL $5.95 6.95

TIE-DOWN STORAGE BAG

•12” L covers with hook-and-loop closures are manufactured from genuine sheepskin •Can be attached to any 1”-2” W web straps •Protect paint and chrome from scratches and scuffing •Sold in pairs •Made in the U.S.A. DESCRIPTION 2” W sheepskin strap covers

SUG. RETAIL $23.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

•Ideal for storing your PowerTye tie-downs •Made of heavy-duty Cordura nylon •Zipper closure •Holds up to four pairs of Big Daddy’s tie-downs or eight pairs of 1” tie-downs •PowerTye logo •Made in the U.S.A. DESCRIPTION Tie-down duffle bag

GASKETS & SEALS ELECTRICAL

•Ideal for storing your PowerTye tie-downs •Made of heavy-duty Cordura® nylon •Barrel lock-string closure •Holds five pairs of 1” tie-downs or two pairs of 2” tie-downs •PowerTye logo •Sold each •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 3550-0024 Storage bag $3.95

TIE-DOWN DUFFLE BAG

BRAKES SUG. RETAIL $10.95

TANKS & OIL FILTERS DASHES & GAUGES

COMPLETE E-TRACK KIT •Kit includes two pieces of 1’ E-track, two pieces of heavy-duty O-rings (rated 6,000-lb. pull) and four rubber ends •Made in the U.S.A. PART # DESCRIPTION 3920-0286 Complete E-track kit

3920-0287

3920-0169

SUG. RETAIL $33.95

E-TRACK RUBBER END PIECES

E-TRACK HORIZONTAL TRACKS

•Made of durable, high-impact rubber •Fits horizontal E-Tracks •Prevents things getting caught underneath the track ends •Gives your E-Track a clean, professional look •Sold in pairs •Made in the U.S.A. PART # 3920-0171

FUEL/AIR SYSTEMS

HOOK-AND-LOOP STRAPS

3920-0013

DESCRIPTION 1.5” w/ sheepskin sleeves 1.5” w/o sleeves 1” w/ sheepskin sleeves

PART # 3550-0076

SEATS & SISSY BARS

ENGINE

SHEEPSKIN STRAP COVERS

PART # 3920-0014

TOURING

HANDLEBAR HANDCUFFS

•Perfect for bars or secure areas too thick for hooks •Won’t scratch paint or chrome •4,500-lb. test nylon webbing •18” length •Sold in pairs •Made in the U.S.A.

DESCRIPTION E-Track rubber end pieces

SUG. RETAIL $7.95

•Strong 12-gauge steel •Silver zinc-plated •Great for personal or commercial trailers •Made in the U.S.A. PART # DESCRIPTION 3920-0287 36” E-tracks (2-pk.) 3920-0169 58” E-tracks (2-pk.) 3920-0170 58” E-tracks (8-pk.)

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $26.95 (pr.) 47.95 (pr.) 21.95 (ea.)

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1283


SECTION

21

WINDSHIELDS TOURING E-TRACK FLOOR PLATE KIT

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

PART # 3920-0198

DESCRIPTION E-track floor plate kit

SUG. RETAIL $15.95

E-TRACK STRAP •2” wide x 7” long strap •Hooks into the E-Track •D-ring end allows the use of any standard tie down •Black only; sold each PART # 3920-0070

DESCRIPTION E-Track strap (ea.)

SUG. RETAIL $7.95

TRANSMISSION & DRIVELINE

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1284

•Clip into standard E-tracks (E/A series) •Can be repositioned for best attachment point •Available in D-ring with 2” Big Daddy strap (rated 2,000-lb. pull) and heavy-duty O-ring (rated 6,000-lb. pull) •Sold in 4-packs •Track not included •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 3920-0148 D-Ring Clips $23.95 3920-0149 O-Ring Clips 29.95

3930-0004

3930-0005

3920-0004

ELECTRICAL

HANDLEBARS, CONTROLS & MIRRORS

E-TRACK CLIPS

3920-0003

GASKETS & SEALS

LIGHTING

3920-0149

3920-0148

•Fits standard and heavy-duty E-Track clips •Sloped edges for easy rollover •High-strength steel construction •Includes plate, optional rubber spacer and mounting hardware •Made in the U.S.A.

3920-0002

INTEGRA TIE-DOWNS •Premium-quality cam-buckle motorcycle tie-downs •Same features as original tie-downs but with a softhook extension strap •69” usable length with 1,200-lb. straight tension strength •1” aircraft-quality nylon straps •Patented pressure-plate cam-lock buckles •1,800-lb. cam-buckle strength •Vinyl-coated S-hooks •Sold in pairs •Made in the U.S.A. PART # 3920-0002 3920-0003 3920-0004

DESCRIPTION Red Black Blue

CUSTOM TIE-DOWN BRACKETS •Stylish custom brackets bolt to the side of the front fork to provide a secure, easily accessible point to attach tie-downs •Will work with detachable windshields on FLHR models •Sold in pairs SUG. RETAIL $36.95 36.95 36.95

PART # DESCRIPTION FOR 83-08 FLHTCU, FLHTC, FLHT, FLHR, FLHRC AND FLHRS 3930-0004 Teardrop 3930-0005 Silhouette

SUG. RETAIL $49.95 52.95

3920-0005

INTEGRA RAT PAK

3920-0007

•Twin pack of ratchet-buckle tie-downs with softhook tie-down strap for securing motorcycles, ATVs and other equipment •Same features as the original Rat Pak but with a softhook tie-down strap •Measure 6’ L •Vinyl-coated hooks protect finish •Durable nylon web strap •Ratchet buckle features safety lock •1,200-lb. assembly strength; 400-lb. working load limit •Made in the U.S.A. PART # 3920-0005 3920-0006 3920-0007

3920-0008

3920-0009 3920-0006

RAT PAK

DESCRIPTION Red Black Blue

SUG. RETAIL $39.95 39.95 39.95

•Twin-pack of ratchet-buckle tie-down straps with safety locks for securing motorcycles, ATVs and other equipment •Measure 6’ L •Vinyl-coated hooks protect finish •Durable nylon web strap •1,200-lb. assembly strength; 400-lb. working load limit •Made in the U.S.A. PART # 3920-0008 3920-0009

All part numbers in BOLD MAGENTA are new for 2011.

DESCRIPTION Red Black

SUG. RETAIL $35.95 35.95


SECTION 3920-0203

WINDSHIELDS

3920-0209

3920-0204

21

3920-0210

TOURING INTEGRA BIG BIKE GRADUAL-RELEASE 11/2” RATCHET TIE-DOWNS

INTEGRA BIG BIKE 11/2” CAM BUCKLE TIE-DOWNS

•Two-pack of tie-downs featuring patented gradual-release ratchet, full-size S-hooks and soft-tie end •Measure 77” L •1,800-lb. break strength; 600-lb. working load limit •Sold in pairs

•Two-pack of tie-downs featuring cam-buckle, full size S-hooks, soft-tie and looped end •Measure 77” L •1,800-lb. break strength; 600-lb. working load limit •Sold in pairs

PART # 3920-0203 3920-0204 3920-0205

3920-0205

COLOR Black Blue Red

3920-0199

SUG. RETAIL $59.95 59.95 59.95

3920-0200

PART # 3920-0209 3920-0210 3920-0211

LUGGAGE

3920-0211

SEATS & SISSY BARS EXHAUST COLOR Black Blue Red

SUG. RETAIL $57.95 57.95 57.95

3920-0206

3920-0207

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

STANDARD BIG BIKE GRADUAL-RELEASE 11/2” RATCHET TIE-DOWNS

STANDARD BIG BIKE 11/2” CAM BUCKLE TIE-DOWNS

3920-0202

•Two-pack of tie-downs featuring patented gradual-release ratchet and full size S-hooks •Measure 66” L •1,800-lb. break strength; 600-lb. working load limit •Sold in pairs PART # 3920-0199 3920-0200 3920-0202

•Two-pack of tie-downs featuring cam-buckle, full size S-hooks and looped end •Measure 66” L •1,800-lb. break strength; 600-lb. working load limit •Sold in pairs

COLOR Black Blue Red

SUG. RETAIL $53.95 53.95 53.95

47295-16 47295-14

47295-10

SUG. RETAIL $23.95 23.95 23.95

SUG. RETAIL $51.95 51.95 51.95

40888-31 40888-34

47295-11

40888-26

STANDARD 51/2’ TIE-DOWNS

PART # 47295-11 47295-12

DESCRIPTION Red Blue

SUG. RETAIL $23.95 23.95

•1” aircraft-quality nylon straps •66” L with 1,200-lb. straight tension strength •Patented pressure plate cam-lock buckles •Vinyl-coated S-hooks •Sold in pairs •Made in the U.S.A. PART # 40888-10 40888-26 40888-31 40888-34

•Hold wheels tightly against chocks •36” L x 1” W black polypropylene •Nickel-plated spring-loaded side buckles •Sold in pairs •Made in the U.S.A. DESCRIPTION Wheel tie-downs

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

SUG. RETAIL $9.95

TANKS & OIL FILTERS DASHES & GAUGES DESCRIPTION Red Black Olive Blue

•18” looped nylon straps protect painted and chrome surfaces •Use for extension or additional protection of handlebars, seat rails, etc. •3,000-lb. assembly strength •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION 45214-10 Tie-down extensions

All part numbers in BOLD MAGENTA are new for 2011.

CABLES BRAKES

SUG. RETAIL $30.95 30.95 30.95 30.95

TIE-DOWN SOFT HOOK EXTENSIONS

WHEEL TIE-DOWNS

PART # 41075-10

COLOR Black Blue Red

40888-10

•Five hot colors •66” L x 1” W nylon straps with 1,000-lb. straight tension strength •Popular Ancra cam-lock buckles •One vinyl-coated and one zinc-plated S-hook per strap •Sold in pairs •Made in the U.S.A. DESCRIPTION Orange Lime green Black

PART # 3920-0206 3920-0207 3920-0208

ELECTRICAL

47295-12

1” TIEDOWNS

PART # 47295-14 47295-16 47295-10

GASKETS & SEALS

3920-0208

SUG. RETAIL $6.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1285


SECTION

21

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS

QUICK-DISCONNECT TIE-DOWN ANCHOR KIT 13’ RED TIE-DOWN •1” abrasion-resistant nylon strap •13’ L with 1,200-lb. straight tension strength •Vinyl-coated S-hooks •Sold each •Made in the U.S.A. PART # 40888-25

DESCRIPTION 13’ red tie-down

SUG. RETAIL $20.95

•Quick-disconnect tie-down ring bolts to trailer bed, truck box, etc. •11/8” ring swivels 360° for perfect alignment with direction of pull •Ring easily detaches from contoured aluminum when not needed •Designed to withstand 4,000-lb. straight, 2,000-lb. side pull forces •Comes with nylon locknuts PART # DESCRIPTION •Sold each 40890-10 Tie-down anchor •Made in the U.S.A.

SUG. RETAIL $15.95

MACK’S PREMIUM TIE DOWNS •Lower strap is ratchet operation, top strap features cam buckle operation – pull top strap tight, then ratchet lower strap to fully secure the bike •1.5” wide 5,000 lb. test nylon webbing •Double security stitching •1.5” premium ratchet with 1,800 lb. test buckle •Straps measure 6’ total length •Soft strap with neoprene soft sleeve included •Vinyl-coated S-hooks •Sold in pairs

EXHAUST FUEL/AIR SYSTEMS

PART # 3920-0177

ENGINE

DESCRIPTION Daddy Mack tie-downs (pr.)

SUG. RETAIL $49.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING

TIE DOWNS •1”W x 72” L, 4,500 lb. rated nylon webbing straps •Rated at 400 lb. workload per strap •Vinyl-coated hooks •Industrial grade buckles •Sold in pairs PART # 3920-0192 3920-0193 3920-0194

BASIC TIE DOWNS

3920-0192

3920-0193

3920-0194

DESCRIPTION Tie-downs w/ sewn-in soft straps Tie-downs Tie-downs w/ ratchets

SUG. RETAIL $21.95 20.95 29.95

•1” W x 72” L nylon web straps rated at 4,500 lb. test strength •400 lb. workload per strap •Heavy-duty 1” ratchet PART # 3920-0195

DESCRIPTION Basic tie-downs w/ ratchet (pr.)

SUG. RETAIL $16.95

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1286

CINCHTITE 6 2” X 6’ TIE-DOWNS WITH MILITARY SNAP HOOKS AND BUILT-IN SOFT LOOPS •Positive-lock military snap hook to prevent release over rough terrain •Easy-to-use quick-tightening ratchet buckle and one-hand release bar •Built-in soft loop to protect your paint and chrome •Shock-absorbing sling-type material •E-coated scratch-resistant S hook •1,670lb. working load limit •2” W x 6’ L •Sold in pairs PART # DESCRIPTION SUG. RETAIL 3920-0250 Cinchtite 6 tie-downs $40.95

CINCHTITE 5 1” X 6’ RATCHET TIE-DOWNS WITH MILITARY SNAP HOOKS AND BUILT-IN SOFT LOOPS •Positive-lock military snap hook to prevent release over rough terrain •Easy-to-use quick-tightening ratchet buckle and one-hand release bar •Built-in soft loop to protect your paint and chrome •Shock-absorbing sling-type material •E-coated scratch-resistant S hook •1,000 lb. working load limit •1” W x 6’ L •Sold in pairs PART # 3920-0249

DESCRIPTION Cinchtitle 5 tie-downs

SUG. RETAIL $31.95

CINCHTITE 4 1” X 6’ TIE-DOWNS WITH SNAP HOOKS AND SOFT LOOPS •Positive-lock military snap hook to prevent release over rough terrain •Aircraft cam buckle allows fast and efficient locking with easy-to-use press and release •Build-in soft loop to protect your paint •Shock-absorbing sling-type material •E-coated scratch-resistant S hook •835 lb. working load limit PART # DESCRIPTION SUG. RETAIL •1” W x 6’ L 3920-0248 Cinchtite 4 tie-downs $29.95 •Sold in pairs

All part numbers in BOLD MAGENTA are new for 2011.


SECTION

21

WINDSHIELDS TOURING CINCHTITE 3 1” X 6’ TIE-DOWNS WITH SOFT LOOPS

LUGGAGE

•Aircraft cam buckle allows fast and efficient locking with easy-to-use press and release •Built-in soft loop to protect your paint and chrome •Shock-absorbing sling-type material •E-coated scratch-resistant S hook •835 lb. working load limit •1” W x 6’ L •Sold in pairs PART # 3920-0247

DESCRIPTION Cinchtite 3 tie-downs

SEATS & SISSY BARS

CINCHTITE 2 1” X 5’ RATCHET TIE-DOWNS

SUG. RETAIL $27.95

•Zinc plated, corrosion-resistant S hooks •One vinyl-coated, scratch-resistant S hook •Easy-to-use quick-tightening ratchet buckle and one-hand release bar •835 lb. working load limit •1” W x 5’ L •Sold in pairs PART # 3920-0246

DESCRIPTION Cinchrite 2 tie-downs

SUG. RETAIL $27.95

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

CINCHTITE 1 1” X 5’ TIE-DOWNS •Zinc-plated, corrosion-resistant S hooks •One vinyl-coated, scratch-resistant S hook •Aircraft cam buckle allows fast and efficient locking with easy-to-use press-and-release •835 lb. working load limit •1” W x 5’ L •Sold in pairs PART # 3920-0245

DESCRIPTION Cinchtite 1 tie-downs

SUG. RETAIL $23.95

GASKETS & SEALS

2” RATCHET BUCKLE WITH 27’ WEB •Heavy-duty ratchet strap •Ergonomically designed ratchet has a non-slip-rubberized handle and release bar •Heat-treated carbon steel zinc-plated wire hooks •3,335 lb. working load limit •2” W x 27’ L •Sold each PART # DESCRIPTION 3920-0265 2” ratchet buckle with 27’ web

ELECTRICAL

SUG. RETAIL $28.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

1” X 12’ TIE-DOWNS WITH RATCHET BUCKLES •Econopack designed to give you four utility tie-downs in one package •Light-duty 1” x 12’ ratchet tensioning straps come complete with vinylcoated S hooks •500 lb. working load limit •Sold in a pack of 4 3920-0266

1” x 12’ tie-downs w/ ratchet buckles (4-pk.)

$28.95

TANKS & OIL FILTERS

1” X 6’ TIE-DOWNS WITH CAM BUCKLES •Econopack designed to give your four utility tie-downs in one package •Light-duty 1” x 6’ cam tensioning straps come complete with vinylcoated S hooks •400 lb. working load limit •Sold in a pack of 4 PART # 3920-0267

DESCRIPTION 1” x 6’ tie-downs w/ ratchet buckles (4-pk.)

SOFT LOOPS

STRAP PACK™

•The 18” Soft Loop is designed to work with any type of tie-down, especially the Cinchtite 1 and 2 •Use to loop or create a slip knot at any appropriate attachment point, then attach the S hook at the strap •1” W Soft Loops work with any type of tie-down, either as a loop or in a slip knot •Makes securing easier and helps prevent scratching paint or chrome •Sold in pairs

•Attaches to any standard 2” ratchet strap with a minimum 12” fixed end length; will secure excess web on straps up to 30’ long •Makes it easy to store and transport ratchet straps when not in use •Sold each

PART # 3920-0251

PART # 3920-0271

DESCRIPTION Soft loops

SUG. RETAIL $7.95

All part numbers in BOLD MAGENTA are new for 2011.

DESCRIPTION Strap Pak™ (2-pk.)

SUG. RETAIL $23.95

SUG. RETAIL $12.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1287


SECTION

21

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

HANDLE STRAPS •Designed to fit over the handlebars and secure to Cinchtite 1, Cinchtite 2 or other tie-downs without built-in soft loops •Diameter of the handlebars must be less than 2.5” •341/2” L x 2” W webbing; cuff is approximately 35/8” when flattened •Sold in pairs PART # 3920-0257

DESCRIPTION Handle straps

SUG. RETAIL $13.95

FLEECE COVERS FOR TIE-DOWNS •Measure 1’ L x 23/4” W •Sold in pairs PART # 3920-0272

DESCRIPTION Fleece tie-down covers

SUG. RETAIL $18.95

KWIK STRAPS •Premium soft loops made with round sling material add a little give over rough terrain •As a sling, Kwik Straps ensure that tugging and pulling do not damage your vehicle •12” L x 15/8” W Kwik Straps work well with any tie-down, especially Cinchtite 1 and 2 •Sold in pairs PART # 3920-0258

TRANSMISSION & DRIVELINE

DESCRIPTION Kwik Strap

SUG. RETAIL $24.95

3920-0264

GASKETS & SEALS RECESSED L SECUREMENT ELECTRICAL POINT KIT

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

•Provides the flexibility of the Surface-Mount L Kit, but recessed for an uninterrupted trailer floor •Stainless steel construction resists corrosion •Includes Triple L Stud Fitting with pear ring and installation hardware PART # 3920-0263

SURFACE-MOUNT E SECUREMENT POINT KIT

DESCRIPTION Recessed L securement point kit

SUG. RETAIL $63.95

CABLES

PART # 3920-0264 3920-0278 3920-0279 3920-0280

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

•Can be easily installed without any routering •Easy bolt-on solution to creating a securement point anywhere in a trailer •Great solution for two machines sharing the same fitting in a double-wide trailer •Kit includes one tie-off and installation hardware •Additional fittings sold separately DESCRIPTION Surface Mount E Kit Tie-offs, 2” web, 6” L (pr) Series E or A fitting w/ 2” D-ring (pr) Series E or A fitting w/ 1” D-ring (pr)

SUG. RETAIL $34.95 13.95 22.95 17.95

3920-0261

3920-0260

KITS FRAMES, L-TRACK •The same track used in the airline SUSPENSION -industry to secure seats & FENDERS •Allow more flexibility than a fixed tie-down mounting point 3920-0275 FOOTRESTS •Provide 8”-16” of front-to-back adjustment & LICENSE •Fit the floor or wall of your trailer PLATE FRAMES •Made of high-strength 7075 T-6 aircraft quality clear-anodized aluminum •Surface-Mount L-Track Kit PART #3920-0260 includes one 8” piece of track, Steadymate Stud Fitting and installation hardware TIRES, L-Track Kit PART #3920-0261 comes with one 8” piece of track, TUBES & •Recessed SURFACE-MOUNT L SECUREMENT POINT KITS Steadymate Stud Fitting and installation hardware •Can be easily installed without any routering WHEELS PART # DESCRIPTION SUG. RETAIL •Easy bolt-on solution to creating a securement point anywhere L-TRACK KITS HARDWARE, in your trailer Surface-mount (ea.) $32.95 •Once installed, using the included Steadymate Stud Fitting, you have CHEMICALS 3920-0260 Recessed (ea.) 31.95 a ring fitting for any tie-down solution & TOOLS 3920-0261 L-TRACK ACCESSORIES •Stainless steel construction Steadymate Stud Fittings (2-pk.) 9.95 •Includes installation hardware COVERS, 3920-0274 Heavy-Duty Triple Stud Fitting with PART # DESCRIPTION SUG. RETAIL SECURITY 3920-0275 Pear Ring (2-pk.) 19.95 3920-0262 Surface mount anchor kit $46.95 & GENERAL

1288

All part numbers in BOLD MAGENTA are new for 2011.


SECTION

21

WINDSHIELDS

PICK-UP TRUCK NET

TOURING

•Designed to fit full-size pick-ups, this six-point net meets the new NACSS requirements for securing a load •Works well for securing loads for UTVs and ATVs also •Three of the six points are adjustable using an 809 ratchet buckle PART # DESCRIPTION •Net size: 5’ W x 8’ L 3920-0276 Ratchet cargo net •Overall size: 12’ W x 8’ L

LUGGAGE SUG. RETAIL $211.95

SEATS & SISSY BARS

QUICK-DETACH STRAP KIT ADJUSTABLE BUNGEE KIT LOOP STRAP KIT •Two length-adjustable nylon straps •Measure 38” L; 19” L when end buckles (one male, one female) are connected •Perfect fit for D-rings found on most bags PART # 3920-0155

DESCRIPTION Loop strap kit

SUG. RETAIL $8.95

•Makes mounting anything easy •Includes two heavy-duty bungee cords, each with two rugged hooks •Cord length is adjustable from 5”-24” SUG. PART # DESCRIPTION RETAIL 3920-0154 Adjustable bungee kit $10.95

BAR-HARNESS AND BAR-HARNESS II BAR-HARNESS

3920-0059

•A hassle-free way to secure motorcycles; virtually eliminates the possibility of damage to bodywork •Simple, quick and very easy to use; mounts on the grips and keeps tie-downs away from the body •Nylon webbing has tensile strength of over 5,500 lb. •Can be used on wide variety of motorcycles •Made in the U.S.A.

•Two length-adjustable nylon straps are included; each measures 38” L when buckles are unconnected •Each strap includes one male and one female buckle, plus a second male buckle sewn to the strap which plugs into most Saddlemen luggage •Two separate female buckles also included for custom applications PART # 3920-0156

DESCRIPTION Quick-Detach strap kit

SUG. RETAIL $9.95

ENGINE

GASKETS & SEALS

3920-0058 3920-0150

ELECTRICAL

•Bar-Harness II has a glass-filled injection-molded polycarbonate “cup” to replace the old handlebar “cuff” •Eliminates possible damage to soft grips and holds the cross straps farther away from the switchgear •Sized to fit the widest grips on the market •Uses a heavier thread with more stitches to provide greater strength •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL SPORT/STANDARD (FIT BARS UP TO 32” W) (CONT) 37505 Black $29.95 WIDE (FIT BARS UP TO 34” W) 3920-0061 Black 29.95 X-WIDE (FIT BARS UP TO 36” W) 3920-0152 Black Bar-Harness II 29.95 XX-WIDE (FIT BARS UP TO 40” W) 3920-0153 Black Bar-Harness II 29.95

STRAP RACK •Don’t put your tie-downs in a bag or lay them on the floor ending up with a tangled mess •Get organized and have the tie-downs easily accessible •CNC-machined billet aluminum strap rack is 17” L; designed for trailers with 16” stud wall spacing •Soft strap hanger can be installed on the left or right •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 3911-0031 Strap rack $45.95

TIE-DOWN ANCHORS

SUG. RETAIL $14.95

3920-0151 3920-0062

STRAP WRAPPERS •Slip over tie-down hooks; prevent strap rash and buckle bruise •Fit both the Bar-Harness and Bar-Harness II •Measure approximately 12” L x 11/2” W •Sold in pairs •Made in the U.S.A. PART # 3920-0062

CARGO HOLD-DOWNS

•Designed to fit trucks with or without stake pocket holes •Can be used with bedliners •Easy to install •Sold in pairs PART # DESCRIPTION 3920-0064 Tie down anchors (pr.)

FUEL/AIR SYSTEMS

TRANSMISSION & DRIVELINE

3920-0060

BAR-HARNESS II

PART # DESCRIPTION SUG. RETAIL SHORT (FIT BARS UP TO 28” W) 3920-0150 Black Bar-Harness II $29.95 3920-0058 Red 29.95 3920-0059 Blue 29.95 3920-0060 Black 29.95 SPORT/STANDARD (FIT BARS UP TO 32” W) 3920-0151 Black Bar-Harness II 29.95 37105 Red 29.95 37205 Blue 29.95

EXHAUST

DESCRIPTION Strap wrappers; black

THD-600

SUG. RETAIL $3.95

THD-500

•Exceptional strength and convenience •Made of hardened steel with rust-resistant zinc plating to beat the elements •Each fits into pocket in trailer bed; can be bolted down or welded into place 3920-0069 THD-700 •THD-500 measures 5” x 3.5” and fits into a 3” dia. x 5/16” deep pocket; pull limit of 1,200 lb. •THD-600 is surface-mount style and measures 25/16” x 11/4” with a .200” dia. D-ring; pull limit of 750 lb. •3920-0069 is a round, protected surface-mount style surrounded by plastic ramped bodies and measures 41/8” dia. x 1/2” H with a .25” dia. D-ring; pull limit is 1,500 lb. •THD-700 measures 41/2” x 5” and fits into a 31/2” dia. x 1” deep pocket; pull limit of 5,000 lb. •Drain hole in the base •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL THD-600 750-lb. pull hold-down (4-pk.) $14.95 THD-500 1,200-lb. pull hold-down (pr.) 13.95 3920-0069 1,500-lb. pull hold-down (pr.) 14.95 THD-700 5,000-lb. pull hold-down (pr.) 22.95

All part numbers in BOLD MAGENTA are new for 2011.

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1289


SECTION

21

WINDSHIELDS

DS-110222

TOURING DS-110216 DS-110218

LUGGAGE SEATS & SISSY BARS EXHAUST

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING

CARGO NETS •Quality black cargo nets made of strong elastic cord •Include unbreakable, noncorroding hooks; available in two sizes

BLACK ELASTIC STRAPS •Strong, 10mm black elastic straps in varying lengths •Quick, easy way to attach and carry extra items •Completely plastic-coated heavy-gauge hooks •Available in two- and four-hook designs PART # DS-110216 DS-110218 DS-110219 DS-110222

DESCRIPTION 12” 2-hook 16” 2-hook 20” 2-hook 24” 4-hook

SUG. RETAIL $1.95 1.95 2.95 2.95

3920-0065

3920-0067

DOUBLE-HOOK BUNGEE CORDS •Double-folded heavy-duty coated hooks •9mm natural rubber with cloth cover •2-hook bungee cords are sold in a 10-pack and the 4-hook is sold each PART # 2-HOOK 3920-0066 3920-0067 3920-0068 4-HOOK 3920-0065

LENGTH

SUG. RETAIL

12” 10-pk. 18” 10-pk. 24” 10-pk.

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

DS-110211

DESCRIPTION 15” x 15” 12” x 17”

K31-6539

K31-6541

•Versatile nets hold down nearly anything •Stretch to over double their 15” square size •Six coated, nonabrasive hooks PART # K31-6539 K31-6541 K31-6543 K31-6546

K31-6543

K31-6546

DESCRIPTION Black Red Blue Purple

SUG. RETAIL $6.95 6.95 6.95 6.95

24”

2.95 (ea.)

3550-0026 3550-0027 3920-0119

x 3” standard mesh) to secure cargo and help eliminate fall through •Six ABS plastic hooks are adjustable, durable and designed to reduce scratching •Sub-hooks for quick tightening adjustments •4.5mm (11/64”) bungee thickness •Three colors to choose from •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 15” X 15” 3550-0025 Black $9.95 3550-0026 Red 9.95 3550-0027 Blue 9.95 15” X 30” 3920-0119 Black 14.95

3920-0163

SHOCK CORDS •Heavy-duty shock cords •Nylon hooks resist cracking, even at -45°F •Easy to adjust and have a flat profile •Available in 16”, 24” and 36” •Hippo strap works well to tie down tarps and covers •Sold each SUG. PART # DESCRIPTION RETAIL PART # HIPPO SWIVEL 3920-0163 16” $8.95 3920-0166 3920-0164 24” 8.95 3920-0167 3920-0165 36” 9.95 3920-0168

3920-0166

DESCRIPTION 16” 24” 36”

SUG. RETAIL $6.95 7.95 8.95

3550-0115

THE HOOKER

HK622

•No more scratched paint or chrome from bungee hooks •Available in standard or sport styles •PART #HK622 is made from black synthetic leather with chrome D-rings •PART #3550-0115 is made from 1680 denier fabric with plastic D-rings •Slips easily under passenger seat giving added carrying capacity with four padded D-ring mounting points •Fully adjustable; fits most bikes and simple to use with bungee cords or nets •Measures 12” L x 71/2” H and can adjust to approximately 211/2” L DESCRIPTION PART # SUG. RETAIL Standard HK622 $19.95 Sport 3550-0115 22.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES FLIP-UP BUNGEE HOOKS •Tired of bolting cable guides to your TIRES, Softail struts for bungee hooks? TUBES & •These trick little bungee hooks fold NET-NUTS down against the strut when not in use WHEELS •Ideal for attaching bungee •A stainless steel wave washer keeps the hook where you place it and cords and nets HARDWARE, away from your chrome strut •Available in three popular sizes CHEMICALS •Stamped from cold-rolled steel for strength and durability •Sold in pairs and chrome-plated for a long-lasting finish & TOOLS •Polished •Easy installation PART # DESCRIPTION 85-83407 Net-nuts, 5/16” x 18 SAE COVERS, •Sold in sets of four DESCRIPTION SUG. RETAIL 85-83409 Net-nuts, 3/8” x 16 SAE SECURITY PART # $15.95 85-83408 Net-nuts, 3/8” x 24 SAE & GENERAL DS-190898 For all 86-01 Softail models, except FXSTD

1290

SUG. RETAIL $7.95 7.95

$1.95 (ea.) 1.95 (ea.) 1.95 (ea.)

HANDLEBARS, CONTROLS ADJUSTABLE CARGO NETS & MIRRORS •Premium net is constructed with smaller 2” x 2” mesh (compared to 3” CABLES

PART # DS-110211 DS-110212

DS-110212

BUNGEE NETS

FUEL/AIR SYSTEMS ENGINE

DS-110219

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $4.95 4.95 4.95


SECTION

21

WINDSHIELDS ADJUSTABLE COUPLER LOCK

UNIVERSAL COUPLER LOCK

•Features an adjustable locking pin •The coupler has a 7/8” to 31/2” span •Triple-plated with a chrome finish PART # 4010-0086

DESCRIPTION Universal coupler lock

SUG. RETAIL $13.95

UMAX50 UNATTENDED TRAILER LOCK •Aluminum body with corrosion-resistant powder-coat finish •Hardened steel 5/8” hasp secures unattended trailer •Reinforced shoulder guard resists hammer strikes and saw cuts •Universal size, fits all coupler types from 17/8” to 25/16” •Keyhole cover seals out dirt and grime PART # 4010-0066

PART # 4010-0038

DESCRIPTION Universal coupler lock

SUG. RETAIL $39.95

TOURING LUGGAGE SEATS & SISSY BARS

DESCRIPTION Universal coupler lock

SUG. RETAIL $62.95

•Polished stainless steel •Easy operation; tip snaps firmly into place to install or remove •Sold each DESCRIPTION pin for all Class III, IV and V receivers

5/8”

SUG. RETAIL $9.95

RESETTABLE COMBINATION 5/8” RECEIVER LOCKING PIN

PART # 4010-0033

DESCRIPTION For 2” x 2” receivers (Class III, IV, V)

ENGINE

SUG. RETAIL $19.95

4010-0039

4010-0031

MACHINED HARDENED STEEL RECEIVER LOCKING PINS •Quarter-turn locks/unlocks head •Lock can’t pop open or false lock •Triple-plated-chrome finish or black epoxy powder-coated finish PART # 4010-0030 4010-0031 4010-0032

4010-0042

SOLID STAINLESS STEEL 5/8” RECEIVER LOCKING PIN •Polished 100% stainless steel •Symmetrical design adds that classic finishing touch •Head-pull strength rated at over 5,000 lb. •Quarter-turn lock and unlock •Patented dual lock lug design •Patented internal O-ring cap helps seal out grime for trouble-free use •Test specifications exceed 40,000 lb. PART # 4010-0034

DESCRIPTION Stainless steel receiver locking pin

SUG. RETAIL $29.95

DELUXE RECEIVER PIN WITH CLIP •Triple-chrome-plated •Sold each PART # DESCRIPTION 1/2” for Class I and II receivers 4010-0036 5/8” for Class III, IV and V receivers 4010-0037

SUG. RETAIL $5.95 5.95

SPARE TIRE LOCK •The only spare tire lock that secures both spare tire and tire bracket to a welded frame member •Lock system loops around welded frame member of trailer or automobile frame •Locks through wheel lug nut hole for maximum security •Huge 12mm braided steel cable PART # 4010-0051

DESCRIPTION Spare tire lock

GASKETS & SEALS ELECTRICAL LIGHTING

PREMIUM COUPLER LOCKS •Choice of stainless steel or triplechrome-plated 4010-0046 hardened steel 4010-0045 •Easy quarter-turn locks and unlocks head •Can’t pop open or be falsely locked •Patented design incorporates O-ring and watertight cap 4010-0047 to help seal out dirt and corrosion from the lock head mechanism •Full-length solid forged lock pin can’t pull out •Available individually or in keyed-alike sets PART # DESCRIPTION INDIVIDUAL HARDENED STEEL LOCKS 4010-0039 For couplers w/ up to 7/8” span 4010-0040 For couplers w/ up to 9/16” span 4010-0041 For couplers w/ up to 21/2” span 4010-0042 For couplers w/ up to 31/2” span KEYED-ALIKE HARDENED STEEL LOCK SETS 4010-0044 One 5/8” span lock and one 9/16” span lock 4010-0045 One 5/8” span lock and one 21/2” span lock 4010-0046 One 5/8” span lock and one 31/2” span lock INDIVIDUAL STAINLESS STEEL LOCKS 4010-0043 For couplers w/ up to 9/16” span KEYED-ALIKE STAINLESS STEEL LOCK SET 4010-0047 One 5/8” span lock and one 9/16” span lock

SUG. RETAIL $11.95 16.95 16.95 16.95 35.95 35.95 35.95 26.95 49.95

UNIVERSAL CHOCK LOCK •Ideal for motorcycles, trailers, ATVs, snowmobiles, etc. •Easy two-step installation: just push lock around the wheel and slide lock tight •Comes with three keys SUG. RETAIL $20.95

TRANSMISSION & DRIVELINE

4010-0043

4010-0032

DESCRIPTION SUG. RETAIL $19.95 Chrome, 1/2” for all Class II receiver hitches 5 Chrome, /8” for all Class III, IV and V receiver hitches 19.95 Black, 5/8” for all Class III, IV and V receiver hitches 19.95

EXHAUST FUEL/AIR SYSTEMS

•Easy-to-read numbers •Forged-steel lock tip •Triple-chrome-plated steel pin •Heavy-duty collar overlaps hitch pin for unmatched strength and security •Protective lock head cover included

FLIP-TIP RECEIVER PIN

PART # 4010-0035

•Fits all coupler types and sizes from 17/8” to 25/16” •Made of high-quality hardened steel •Ballistic-grade polymer lock housing cover resists hammer strikes and protects lock mechanism •AMS (Absolute Maximum Security) for your trailer with 360° of solid steel security •Patent pending dual-ratchet locking system •Dual-force coupler lock can be used with cable or chain to secure trailer to ground anchor or fence •Attractive package for grid rack or counter display

PART # 4010-0085

DESCRIPTION Universal chock lock

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $89.95

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1291


SECTION

21

WINDSHIELDS BEARING PROTECTOR WITH BRA •Two great features in one product: wheel bearing protector with bra that captures any grease released by pressure relief •No more grease on wheels •Measure inner diameter of hub to obtain proper size; sold in pairs •Made in the U.S.A.

TOURING LUGGAGE SEATS & SISSY BARS

WHEEL COVERS FOR TRAILERS •Plastic 8” Maxam wheel covers for use on most trailer wheels •Chrome finish PART # •Sold in pairs DS-852136 •Made in the U.S.A.

DESCRIPTION Maxam 8” wheel covers

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

SUG. RETAIL $14.95

PART # 1706-0131 1706-0132 0213-0002

DESCRIPTION 13/4” 2” 2” protector cover

GORILLA GUARD™ TRAILER KEEPER

•Like a chastity belt for trailers – prevents coupler from mating with unauthorized trailer hitch balls •Revolutionary design shields lock from tampering devices •Heavy-duty cast construction •For 2” couplers •Made in the U.S.A.

•The ultimate trailer lock, the Trailer Keeper installs in minutes •It’s totally adjustable – will fit most trailer wheels up to 15” •Heavy-duty, hardened-steel construction and casehardened steel rod •Attaches to special lug latch mounted on wheel, and locks in place with special brass padlock (included) •Doesn’t limit access to wheel bearing grease fittings •Can be used with most trailers – motorcycle, snowmobile, ATV, boat/personal watercraft, camping/RV, utility and more •Made in the U.S.A.

PART # TP20X

PART # TK100

COUPLER LOCK

DESCRIPTION 2” Gorilla coupler lock

SUG. RETAIL $61.95

DESCRIPTION Trailer Keeper

SUG. RETAIL $105.95

SWIVEL JACK

FAS-LOK™ COUPLERS •Straight tongue stamped couplers with Fas-Lok mechanism enable quick and easy hook-up •Coupler lock hole provided for additional trailer security •Choose from 17/8” and 2” ball models •Repair kits available; sold separately •Made in the U.S.A. PART # DESCRIPTION SUG. COUPLERS 7 1706-0138 Fits 1 /8” ball/ 2” channel width; SAE class I 1706-0139 Fits 17/8” ball/ 3” channel width; SAE class I 1706-0141 Fits 2” ball/ 2” channel width; SAE class II

RETAIL

$21.95 21.95

1706-0138

PART # DESCRIPTION COUPLERS (CONT) 1706-0142 Fits 2” ball/ 3” channel width; SAE class II REPAIR KITS 1706-0140 For 17/8” ball couplers 1706-0143 For 2” ball couplers

SUG. RETAIL

$24.95 16.95 17.95

24.95

•Pivoting screw-type tongue jack with 800-lb. capacity •All mounting hardware included to fit rectangular tongues up to 3” x 5”; also fits round tongues •Precision-rolled extra-heavy-duty Acme screw-type drive with maximum maneuverability from offset swivel caster and tough 6” polypropylene wheel •Easily rotated to towing position by spring-loaded double-pin locking mechanism PART # 3902-0052

DESCRIPTION Swivel jack

BRAKES

chrome-plated PART # 3902-0048 3902-0049 3902-0050 3902-0051

HITCH BALL DIAMETER 17/8” 17/8” 2” 2”

TRAILER COUPLERS 3902-0048 SHANK DIAMETER 3/4” 1” 3/4” 1”

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES HI-MOUNT TIRES, SPARE TUBES & TIRE CARRIER WHEELS •Heavy-duty welded and reinforced steel HARDWARE, plate construction CHEMICALS with galvanized finish bolt circle to fit both 4- and 5-lug wheels & TOOLS •Adjustable •Fits all tongues up to 3” W x 4” H COVERS, •Easy bolt-on installation DESCRIPTION SECURITY PART # Hi-mount spare tire carrier & GENERAL 3902-0055

1292

SUG. RETAIL $50.95

3902-0053

TANKS & TRAILER BALLS OIL FILTERS •Solid steel construction; DASHES & GAUGES

SUG. RETAIL $26.95 23.95 4.95

3902-0050 SHANK LENGTH 11/2” 2” 15/8” 2”

CAPACITY SUG. RETAIL 2,000 lb. $8.95 2,000 lb. 8.95 3,500 lb. 10.95 5,000 lb. 11.95

•Coupler lock hole provided for additional trailer security •Black powder-coat finish •For use with 2” ball; 3,500-lb. rating PART # 3902-0053 3902-0054

DESCRIPTION Fits 21/2” i.d. channel Fits 3” i.d. channel

SUG. RETAIL $17.95 17.95

3902-0045

RECEIVER TUBES •Dropdown receiver tubes match value and quality •Solid one-piece forged construction •For receiver hitches with 2” x 2” box opening •For hitch balls with 1” shank diameter SUG. RETAIL $29.95

PART # 3902-0045 3902-0046

All part numbers in BOLD MAGENTA are new for 2011.

DESCRIPTION 3.25” drop 2” drop

3902-0046 SUG. RETAIL $27.95 25.95


SECTION 2010-0361

2010-0364

2010-0362

WINDSHIELDS

•SAE/DOT/FMVSS/CMVSS approved •7-round (blade) to 5-flat female adapter •Features 16” lead •Links vehicle wiring system to trailer wiring system; fits most RVs, trucks, SUVs and other vehicles •23” long •Made in the U.S.A.

4-WAY TRAILER WIRING HARNESSES •Split wishbone four-conductor harness and extension •Made in the U.S.A. PART # 2010-0361 2010-0364 2010-0362

7- TO 5-WAY TRAILER ADAPTER CABLE

DESCRIPTION 4’ wishbone 4-way trunk connector 18” wishbone 4-way trailer wiring harness 25’ wishbone 4-way trailer wiring harness

SUG. RETAIL $5.95 4.95 20.95

LICENSE PLATE BRACKET

PART # 2010-0360

DESCRIPTION Trailer adapter cable

TOURING LUGGAGE SUG. RETAIL $15.95

SEATS & SISSY BARS FIVE-PIN MALE/FEMALE CONNECTOR

•Black rust-proof license plate bracket •Made in the U.S.A. PART # DESCRIPTION 2030-0206 License plate bracket

EXHAUST

•Five-pin male/female connector for use with any receiver hitch with five-pin connection SUG. RETAIL $3.95

21

PART # DS-708136

DESCRIPTION Five-pin male/female connector

SUG. RETAIL $16.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

2010-0633

TAILLIGHT KIT •Standard taillights and wiring for a wide variety of trailers •Specifically designed for trailers under 80” wide; with clearance lights and ID bars (available separately), kit meets lighting requirements for trailers 80” wide and wider •Kit contains two multifunction taillights, two stud-mounted amber side marker lights, plastic license plate bracket, 20’ wishbone trailer harness, 48” trunk connector, mounting hardware and instructions •Taillights and license plate bracket also available separately (sold each) DESCRIPTION Std. taillight kit Taillight (left-hand) Taillight (right-hand) License plate bracket

PART # 2010-0633 2010-0634 2010-0635 2030-0385

SUG. RETAIL $39.95 9.95 9.95 3.95

OVAL TAILLIGHT KIT •Waterproof design performs stop, turn and taillight functions •Virtually indestructible sonically sealed lens and housing unit has shockmounted dual filament bulb •Kit contains light, grommet and three-way plug •Light available separately •Sold each – order two kits or two lights to have one for each side •Made in the U.S.A. PART # 1706-0126 1706-0127

1706-0126

DESCRIPTION Light kit Light only

1706-0127 SUG. RETAIL $12.95 10.95

WATERPROOF LOW-PROFILE TAILLIGHT KIT

GASKETS & SEALS

•Replaceable sealed 1706-0119 lamp capsule protects bulb and electrical contacts from thermoshock and corrosion •Launch and load again and again – water cannot penetrate the capsule •Kit contains two waterproof low-profile taillights, two sealed waterproof amber side marker lights, license plate bracket, 25’ wishbone trailer harness, 48” trunk connector, mounting hardware and instructions •Lights (bulb replacement capsules) and lens sets (tail and side) available separately •Made in the U.S.A. PART # 1706-0119 1706-0120 1706-0121 1706-0122 1706-0136

DESCRIPTION Low profile taillight kit Taillight (left-hand) Taillight (right-hand) Repl. lens set Repl. bulb capsule

ROUND MARKER AND CLEARANCE LIGHTS FOR TRAILERS

1706-0128

•Lens is sonically welded to housing to form a waterproof module •2” light meets requirements for both side marker light and clearance lamp if mounted at 45° angle •Flush mounting requires use of shock mount grommet, available separately •Available in amber or red •Sold each •Made in the U.S.A. PART # 1706-0128 1706-0129 1706-0130

DESCRIPTION Amber Red Rubber grommet

SUG. RETAIL $59.95 24.95 24.95 8.95 12.95

1706-0129

PART # 1706-0137

DESCRIPTION Amber side marker light

1706-0130 SUG. RETAIL $4.95 4.95 1.95

•Hermetically-sealed, Class “A” acrylic reflector with adhesive backing •Measures 31/4” W x 11/2” H SUG. RETAIL $5.95

PART # 2010-0626 2010-0627

COLOR Red Amber

All part numbers in BOLD MAGENTA are new for 2011.

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

DASHES & GAUGES

2010-0626

RECTANGULAR REFLECTORS

•Features a tapered base for easier installation, built-in reflector and 18” wire lead •Bulbs and lenses easily replaceable; use standard automotive #1157 bulb •Sold each •Made in the U.S.A.

LIGHTING

TANKS & OIL FILTERS

2010-0627

STUD MOUNT AMBER SIDE MARKER LIGHT

ELECTRICAL

SUG. RETAIL $1.95 1.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1293


SECTION

21 2010-0344

WINDSHIELDS 2010-0341

2010-0351 2010-0347

TOURING LUGGAGE SEATS & AERO PRO OVER SISSY BARS 80” TRAILER LIGHT KIT EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

WATERPROOF TRAILER LIGHT KITS •SAE/DOT/FMVSS/CMVSS approved •Contains two stud-mount taillights with red side markers and reflectors, license plate bracket, 25’ wiring harness and all necessary hardware •Replacement lights and lenses sold separately •Dimensions 49/16” x 49/16” •Made in the U.S.A.

•SAE/DOT/FMVSS/CMVSS approved •LED or Standard-style waterproof kits •Contains two universal mount taillights with red side markers and reflectors, two seated amber side markers, license bracket, 25’ wiring harness and all necessary hardware •Dimensions 77/8” x 31/4” •Replacement lights and lenses sold separately •Made in the U.S.A. PART # LED 2010-0341 2010-0342 2010-0343 STANDARD 2010-0347 2010-0348 2010-0349 LENS 2010-0350

DESCRIPTION

SUG. RETAIL

Trailer light kit Right (passenger side) repl. LED light Left (driver side) repl. LED light

$136.95 49.95 56.95

Trailer light kit Right (passenger side) repl. light Left (driver side) repl. light

63.95 16.95 17.95

Repl. side and taillight lens kit

6.95

2010-0354

PART # DESCRIPTION LED 2010-0344 Trailer light kit 2010-0345 Right (passenger side) repl. light 2010-0346 Left (driver side) repl. light STANDARD 2010-0351 Trailer light kit 2010-0352 Right (passenger side) repl. taillight 2010-0353 Left (driver side) repl. taillight REPLACEMENT LENSES 2010-0354 Side marker repl. lens kit 2010-0355 Taillight repl. lens kit

SUG. RETAIL $109.95 44.95 49.95 46.95 11.95 11.95 3.95 5.95

2060-0118

ELECTRICAL 2060-0081

2060-0119

2010-0638 2060-0082 2010-0640

LIGHTING

2060-0085

HANDLEBARS, TRAILER LED BRITE LITES CONTROLS •Work with any enclosed, open, steel and aluminum trailer & MIRRORS •Hi-output LEDs are made with the highest quality LED CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

components and have built-in reflectors •Work with rubber gasket or metal bezel mounts •All units are waterproof sealed •Replaces any standard trailer light •DOT/SAE approved •Sold each DESCRIPTION Oval 6.5” 10 LED, red Oval 6.5” 13 LED, amber Oval 6.5”, clear lens/10 red LED dual function Oval 2.5”, marker light, clear lens/2 red LED Oval 2.5”, marker light, clear lens/2 amber LED Round 2” 8 LED, red Round 2” 8 LED, amber Round 2.5” 10 LED, red Round 2.5” 10 LED, amber Rectangle 13.5” 13 LED dual function, red

2060-0086

2060-0120 2060-0087 2060-0088

2060-0089

2060-0177 2060-0237 PART # SUG. RETAIL 2060-0081 $19.95 2060-0082 19.95 2010-0638 19.95 2010-0640 9.95 2010-0641 9.95 2060-0083 7.95 2060-0084 7.95 2060-0085 7.95 2060-0086 7.95 2060-0118 39.95

2010-0639

DESCRIPTION Rectangle 6” 6 LED, red w/ clear lens Rectangle 5” 8 LED, red w/ clear lens Rectangle 6”, 12 red LED dual function Rectangle 3.75” 12 LED, red Rectangle 3.75” 12 LED, amber Rectangle 2.52” 3 LED, red Rectangle 2.52” 3 LED, amber Rectangle 2.52” 3 LED, clear 14” long strip light, clear/11 red LED dual function

PART # SUG. RETAIL 2060-0119 $19.95 2060-0177 29.95 2060-0237 29.95 2060-0120 16.95 16.95 2060-0121 2060-0087 7.95 2060-0088 7.95 2060-0089 9.95 2010-0639 39.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS 2040-0396 & LICENSE 2010-0358 OVAL STOP/ PLATE FRAMES REPLACEMENT SIDE MARKERS 2040-0399 TAIL/TURN TIRES, AND REFLECTORS SIGNAL LIGHT •DOT/SAE/FMVSS/CMVSS approved TUBES & •DOT/SAE/FMVSS/CMVSS approved 2040-0400 markers use snap-in installation •Single 4” polycarbonate housing/lens features WHEELS •Side •Reflectors use self-adhesive and two screw holes for installation rubber grommet and standard 3-pin pigtail •Sealed flush mount HARDWARE, •Made in the U.S.A. DESCRIPTION SUG. RETAIL PART # DESCRIPTION SUG. RETAIL •6” long CHEMICALS PART # •Replacement light sold separately OVAL SIDE MARKER LIGHTS (4” X 21/16”) ROUND REFLECTORS (3”) & TOOLS 2010-0358 Amber (ea.) $3.95 2040-0398 Red (pr.) $1.95 •Made in the U.S.A. 3.95 2040-0399 Amber (pr.) 1.95 PART # DESCRIPTION SUG. RETAIL COVERS, 2010-0359 Red (ea.) 2040-0400 18” reflector strip (8-pk.) 31.95 2010-0356 Light assembly $12.95 SECURITY RECTANGULAR REFLECTORS (43/8” X 11/8”) 3.95 2010-0357 Repl. light 8.95 & GENERAL 2040-0396 Red (pr.)

1294

All part numbers in BOLD MAGENTA are new for 2011.


SECTION

21

WINDSHIELDS TOURING

4010-0108

4010-0122

LUGGAGE SEATS & SISSY BARS

20-UNIT PROVOGUE 300/305 LOCK COUNTER PRE-PACK

4010-0109

GRANIT VICTORY X-PLUS 68 BRAKE DISC LOCKS •For up to 8mm thick brake discs •ABUS-X-Plus locking system for extremely high protection against unlawful opening •Disc memory reminds you to detach lock before starting •Includes lighted key •Optional carrier available separately PART # 4010-0108 4010-0109 4010-0110

DESCRIPTION Black brake disc lock Yellow brake disc lock Carrier

4010-0110

SUG. RETAIL $108.95 108.95 29.95

EXHAUST FUEL/AIR SYSTEMS

•Includes 10 Provogue 300 locks (two in each color) and 10 Provogue 305 locks (two in each color) •Bonus $54.95-value Provogue 300 lock in gunmetal chrome (PART #9903-0209) included when pre-pack is purchased •Sold each PART # 4010-0122 9903-0209

ENGINE

DESCRIPTION SUG. RETAIL 20-unit Provogue 300/305 lock counter pre-pack $54.95 (ea.) Provogue 300 chrome promo lock 54.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

4010-0170

4010-0171

4010-0176

4010-0177

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 4010-0178 4010-0172

4010-0173

DETECTO 7000 RS 1 LOCKS/ALARMS •Brake disc lock features electronic movement detection •Loud alarm sounds if bike is disturbed •Anti-tamper hardened steel body and bolt •Easy one-hand installation and removal •3-color LED notifies you of battery status, activation and detection •Includes batteries PART # 4010-0170 4010-0171 4010-0172 4010-0173

DESCRIPTION Red Yellow Signature white Signature yellow

77 SLEDGE BRAKE DISC LOCKS •Anti lock-picking design •Cable reminds rider to detach lock before driving off (not shown) •Rubber cover •13mm closing bolt is constructed of hardened steel PART # 4010-0176 4010-0177 4010-0178

DESCRIPTION Grip red Grip yellow Web yellow

SUG. RETAIL $149.95 149.95 149.95

SUG. RETAIL $160.95 160.95 160.95 160.95

4010-0174

4010-0175

•Disc brake lock features a cable to remind rider to detach lock before driving off (not shown) •Tough anti-tamper body is constructed of hardened steel •9mm hardened steel locking bolt •Two keys included PART # 4010-0174 4010-0175

DESCRIPTION Red Yellow

SUG. RETAIL $68.95 68.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

GRANIT QUICK MAXI AND MINI BRAKE DISC LOCK

330 TRIGGER DISC LOCKS

CABLES

•Special hardened steel construction •Locking system features all-around drill protection •ABUS-Plus locking system for extremely high protection against unlawful opening •Includes disc memory to prevent forgetting lock in brake disc •Manual cylinder cover 4010-0105 •Available in yellow PART # DESCRIPTION 4010-0105 70mm Maxi 4010-0106 53mm Mini

All part numbers in BOLD MAGENTA are new for 2011.

4010-0106

SUG. RETAIL $134.95 121.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1295


SECTION

21

WINDSHIELDS 4010-0119

4010-0160

4010-0159

4010-0120

TOURING LUGGAGE

4010-0111 4010-0112

SEATS & SISSY BARS

DETECTO 7000 RS SERIES LOCKS •Combines mechanical and electric lock technology into one great lock •Separate locking is no longer necessary •Lock body and the square bolt are made from hardened steel •In case of an attack, a vibration sensor triggers a 110 dB strong signal •RS 2 functions are supported by optic signals (LED)

EXHAUST FUEL/AIR SYSTEMS

4010-0113

PART # RS 2 4010-0159 4010-0160 RS 3 4010-0158

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1296

PROVOGUE 300 AND 305 BRAKE DISC LOCKS •Small, handy, compact and secure •Easy one-hand operation •Impact-resistant solid cast metal with a shiny metal finish or colored rubberized surface •Hardened alloy steel locking bolt: 10mm for Provogue 300 and 5mm for Provogue 305 PART # 300 4010-0116 4010-0117 4010-0118 4010-0119 4010-0120

DESCRIPTION

SUG. RETAIL

White Red Chrome Gold Black

$50.95 50.95 50.95 50.95 50.95

PART # 305 4010-0111 4010-0112 4010-0113 4010-0114 4010-0115

DESCRIPTION

SUG. RETAIL

White Red Chrome Gold Black

$42.95 42.95 42.95 42.95 42.95

STRADA 34 MINI BRAKE DISC LOCK •Small (50mm), handy, compact and secure •Special hardened steel construction •All-around drill protection •Double-bolted shackle •Disc memory reminds you to detach the lock before starting •ABUS EXTRA-Class cylinder with symmetrical dimple key PART # 4010-0107

DESCRIPTION SUG. RETAIL Strada 34 mini brake disc lock $86.95

GRANIT EXTREME PLUS 59 CHAIN LOCKS •Special hardened chain protects against theft from even the most aggressive mechanical attacks •Chain link locks directly into lock •Extreme resistance against pulling link out of lock •ABUS-X-Plus locking system includes more than one million key variations •Textile cover prevents scratches PART # DESCRIPTION 4010-0090 66” x 12mm 4010-0091 55” x 12mm

4010-0158

DESCRIPTION

SUG. RETAIL

Red Yellow

$121.95 121.95

Yellow

111.95

ELECTRONIC GRANIT DETECTO 800 BRAKE DISC LOCK •Electronic brake disc lock with a 14mm hardened bolt •3-D position control for immediate alarm when position changes or shocks are detected •High-quality steel lock has ABUS X-Plus locking for extreme protection against unlawful opening •Includes batteries PART # 4010-0104

DESCRIPTION Electronic Granit Detecto 800 brake disc lock

SUG. RETAIL $229.95

WBA 100 LOCK ANCHOR •16mm hardened steel shackle for extreme resistance against theft •Indoor/outdoor use on floor or walls •Flat shape and high-quality materials allow anchor to be driven over in fixed position •Includes hardware •Sold each PART # 4010-0121

DESCRIPTION WBA 100 lock anchor

Textile cover prevents scratches 4010-0090

SUG. RETAIL $103.95

4010-0179

8900 CHAIN LOCKS •Anti-picking design built into the ABUS automatic cylinder •Hardened steel 8mm square chain and case •Chain includes a fabric sleeve to prevent paint damage •Comes with two coded keys SUG. RETAIL $484.95 432.95

PART # 4010-0179 4010-0180

DESCRIPTION Black Red

4010-0180

SUG. RETAIL $78.95 78.95

GRANIT BORDO X-PLUS •Offers maximum flexibility for external securing •Links made from 5.5mm-thick hardened special steel •Protects against brutal opening methods •Easy to transport PART # 4010-0157

DESCRIPTION Granit Bordo X-Plus lock

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $152.95


SECTION

WINDSHIELDS

GRANIT DETECTO ELECTRONIC CHAIN LOCK/ BRAKE DISC LOCK

GRANIT CITY X-PLUS 1060 CHAIN LOCKS

•Combines famous ABUS disc brake lock with a hardened 47” x 12mm chain •Electronic brake disc lock features 14mm special hardened bolt •High-quality steel lock can be used without chain •3-D position control for immediate alarm when position changes or shocks are detected •ABUS X-Plus locking system •Includes batteries PART # 4010-0097

DESCRIPTION Electronic chain lock/brake disc lock

SUG. RETAIL $335.95

4010-0094

•10mm hexagonal chain is as hard as granite with a high resistance to cutting, pulling and torsion •ABUS Power Cell technology locks chain directly into lock body •Interlocked lock housing protects against the most determined attacks •ABUS X-Plus cylinder for high picking protection •Automatic keyhole cover PART # DESCRIPTION SUG. RETAIL 4010-0094 66” x 10mm $206.95 4010-0095 55” x 10mm 198.95 4010-0096 43” x 10mm 181.95

CITYCHAIN 1010 CHAIN LOCK

•Combines famous ABUS brake disc lock with 18” x 12mm hardened steel chain •Steel brake disc lock can be used separately •ABUS X-Plus locking system for the highest protection against unlawful opening •Includes lighted key and memory cable DESCRIPTION Granit Victory X-Plus 68 chain lock

•Hardened 10mm square chain with fabric sleeve •High-quality ABUS padlock for all-around protection •Lock features a hardened shackle and body, plus extra shackle guard to protect against bolt cutter and sawing attacks DESCRIPTION 78” x 10mm 55” x 10mm

SUG. RETAIL $182.95

4010-0092

PART # 4010-0099

DESCRIPTION Citychain 1010 chain lock

SUG. RETAIL $154.95 135.95

SUG. RETAIL $154.95

WINNER CHAIN 92 CHAIN LOCK

DESCRIPTION 66” x 27mm 39” x 27mm

SUG. RETAIL $94.95 72.95

SUG. RETAIL $90.95

HANDLEBARS, CONTROLS & MIRRORS

•Hardened steel shells protect flexible 43” x 19mm steel cable •ABUS cylinder features a selflocking mechanism PART # 4010-0103

DESCRIPTION Centuro 860 cable lock

SUG. RETAIL $45.95

CABLES

4010-0166

•Revolutionary motorcycle helmet, jacket and gear lock •Simple to install and use •Attach to almost anywhere there is a bolt or screw on your bike •All major components made of steel •Vinyl-coated, braided steel cable •Kit includes the lock, two keys, attach point washer and 12” cable loop •Additional cable lengths and attach point washers are available separately •Available with chrome or gloss black finish •Made in the U.S.A.

BRAKES

4010-0162

TANKS & OIL FILTERS DASHES & GAUGES 4010-0161

DESCRIPTION Chrome lock kit w/ 12” cable Black lock kit w/ 12” cable 12” cable loop 18” cable loop

SUG. RETAIL $59.95 59.95 7.95 8.95

PART # 4010-0165 4010-0166 4010-0167 4010-0168

DESCRIPTION 3’ cable loop 6’ cable loop 12’ cable loop Attach point washer

SUG. RETAIL $9.95 9.95 12.95 7.95

P606

HELMET LOCKS

UNIVERSAL HELMET LOCK

•Clamps securely to any 7/8” or 11/8” round tube with one-way mounting screws •Heavy-duty solid tumbler lock •Each lock is display packed

•Mounts to any 7/8” to 11/4” diameter frame tube, engine guard or other tube bar •Chrome finish •Installs with standard hand tools •Sold each DESCRIPTION Helmet lock, universal

ELECTRICAL LIGHTING

JACKET/HELMET LOCKS

PART # 0136-0009

ENGINE

GASKETS & SEALS

CENTURO 860 CABLE LOCK

•Compact, flexible and secure •Hardened steel shells around a strong 27mm Steel-O-Flex cable •ABUS high-quality five-pin cylinder

PART # 4010-0161 4010-0162 4010-0163 4010-0164

SEATS & SISSY BARS

TRANSMISSION & DRIVELINE •Strong 55” x 8mm hardened square chain •Lock features hardened shackle for extra protection against brutal attacks PART # DESCRIPTION 4010-0100 Winner chain 92 chain lock

STEEL-O-FLEX 900 CABLE LOCKS

PART # 4010-0101 4010-0102

LUGGAGE

FUEL/AIR SYSTEMS

•Hardened 55” x 9mm chain with a robust textile webbing •ABUS-Plus cylinder for high picking protection •Automatic keyhole cover

PLATINUM 34 CHAIN LOCKS

PART # 4010-0092 4010-0093

TOURING

EXHAUST

GRANIT VICTORY X-PLUS 68 CHAIN LOCK

PART # 4010-0098

21

SUG. RETAIL $25.95

PART # P605 P606

DESCRIPTION Chrome, 7/8” Black, 7/8”

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $24.95 22.95

P605 PART # P608

SUG. DESCRIPTION RETAIL Chrome, 1” - 11/8” $29.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1297


SECTION

21

WINDSHIELDS TOURING

ALARM MOTORCYCLE DISC LOCK

LUGGAGE

•Alarm motorcycle disc lock with reminder cable and pouch •Features a push button activation •Can be used with or without the alarm •7mm pin diameter •Black and chrome coloring

SEATS & SISSY BARS

PART # 4010-0192

DESCRIPTION 7mm pin alarm motorcycle disc lock

SUG. RETAIL $70.00

4010-0184

EXHAUST FUEL/AIR SYSTEMS ENGINE

4010-0181

4010-0182

TRANSMISSION ROTOR/ LOCKS & DRIVELINE DISC •Hardened metal rotor/disc locks GASKETS & SEALS ELECTRICAL LIGHTING

resist cutting, sawing and chisel attacks •Available with a 5.5mm short throat pin or a 10mm long throat pin •Comes with carry pouch and a disc lock reminder cable •Includes an extra mini flashlight key for three total keys •Features a durable push button lock with high security anti-drill round key lock cores PART # DESCRIPTION 4010-0181 5.5mm pin, yellow 4010-0182 10mm pin, chrome 4010-0183 10mm pin, yellow

4010-0183 SUG. RETAIL $28.99 28.99 28.99

•Short-shackle disc U-lock •Features three flat keys with one key equipped with a mini flashlight, and a durable PVC sleeve covers the chrome shackle to prevent marring and scratching •The hardened solid steel lock prevents prying, sawing and hammer impacts •Ideal for motorcycles, spare tires, trailers, ATVs, snowmobiles and watercraft PART # 4010-0072

DESCRIPTION Max60 U-lock

SUG. RETAIL $34.95

4010-0057 4010-0058

•For use on motorcycle discs and looped cables •The strongest short-shackle locks available

REMINDER CABLE

PART # 4010-0057 4010-0058

•Dual-loop reminder cable for disc locks PART # DESCRIPTION 4010-0008 48” reminder cable

SUG. RETAIL

DESCRIPTION Black, Max 40 Yellow, Max 40

SUG. RETAIL $29.95 29.95

ULTRA MAX SUPER STRENGTH U-LOCKS

$5.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, 4010-0015 4010-0016 4010-0017 TUBES & ® TRIMAFLEX COILED CABLE LOCKS WHEELS •High-strength Trimaflex quadra braid cable with PVC protective coating HARDWARE, to prevent surface scratching mechanisms are covered in rugged plastic for durability and CHEMICALS •Lock trouble-free use & TOOLS PART # DESCRIPTION SUG. RETAIL 72” cable w/ U-lock $43.95 COVERS, 4010-0015 72” cable w/ combination lock 13.95 SECURITY 4010-0016 72” cable w/ quick-release lock 14.95 & GENERAL 4010-0017

1298

SUG. RETAIL $52.99 52.99

ULTRA-HIGH-SECURITY DISC/CABLE LOCKS

CABLES

TANKS & OIL FILTERS

•Alarm disc lock with reminder cable and carry pouch •10mm pin •Available in chrome or yellow PART # DESCRIPTION 4010-0184 Chrome 4010-0185 Yellow

MAX60 U-LOCK

HANDLEBARS, CONTROLS & MIRRORS

BRAKES

4010-0185

ALARM DISC LOCKS

•Ultra-Max 90 maximum security lock features hardened-chromoly construction with an oversized 16mm shackle; Max 80 is ideal for most motorcycle or bicycle applications and uses a 14mm shackle •Ultra-Max 90 is constructed from hardened chromoly steel and features an exclusive dual shear plate locking mechanism •Dual-case bolt lock withstands more than 6.5 tons of pull force; shackle can withstand more than 8,000 lb. of 4010-0004 expansion force •Shackle length and width specifically designed for motorcycles; hardened chromoly lock body 4010-0003 •Max 80 features a hardened lock body •Both feature locking mechanisms placed in the center of a hardenedchromoly crossbar for maximum strength, 7-pin tubular pick- and drillresistant lock cylinders and ballistic-grade polymer lock body housings to resist hammer strikes and scratching of painted surfaces •Shackles have protective PVC skins PART # 4010-0003 4010-0004

DESCRIPTION Max 80 (14mm) Max 90 (16mm)

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $32.95 52.95


SECTION

21

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS

VERSA CABLE LOCK •Multi-use versa cable lock •Trimaflex cable with locking cinching feature •10’ x 10mm PART # 4010-0071

EXHAUST

DESCRIPTION Versa cable

SUG. RETAIL $25.95

FUEL/AIR SYSTEMS 4010-0010

4010-0011

ENGINE GLADIATOR SERIES ARMORED CABLES

4010-0049 4010-0073

MULTI-USE CABLE LOCKS •Feature 10’ x 10mm, 48” and 72” 4010-0074 Trimaflex™ ultra-tough braided cable and flat keys •Great for use on bikes, bike carriers, trailers or watercraft on the beach PART # 4010-0049 4010-0073 4010-0074

DESCRIPTION 10’ x 10mm cable w/ resettable combination MAG series lock 48” cable lock 72” cable lock

•Indestructible maximum-security armor-plated cable locks •Plastic-covered braided stainless steel covers with patented hardened armor-plated steel cups that repel saw cuts and bolt cutters •Flexible for easy transport •Ballistic grade polymer lock housing cover resists hammer strikes; protects lock mechanism •Patented key cover resists grime and moisture PART # DESCRIPTION SUG. RETAIL 4010-0010 48” x 26mm dia. $49.95 4010-0011 72” x 26mm dia. 59.95 4010-0012 36” x 22mm dia. 29.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING

SUG. RETAIL $21.95 39.95 45.95

HANDLEBARS, CONTROLS & MIRRORS RETRACTABLE CABLE LOCK •Rugged three-digit resettable combination lock •36” L x 4mm dia. retractable cable PART # 4010-0050

4010-0013

DESCRIPTION Lock w/ retractable cable

CABLES

SUG. RETAIL $21.95

BRAKES TANKS & OIL FILTERS

4010-0014 4010-0026

DASHES & GAUGES

TRIMAFLEX™ MAX SECURITY BRAIDED CABLES •Quadra-braid cables •Available with integrated lock or for use with Tri-Max® disc and U-locks PART # W/ KEYED CABLE LOCK 4010-0013 4010-0014 DUAL-LOOP CABLES 4010-0052 4010-0053 4010-0054 4010-0055

ULTRA-MAX T-HEX™ SUPER CHAIN

4010-0052 DESCRIPTION

4010-0053 SUG. RETAIL

32” x 15mm 72” x 15mm

$24.95 32.95

30’ x 10mm 15’ x 10mm 12’ x 12mm 8’ x 15mm

28.95 17.95 17.95 17.95

•Hexagonal-shaped, case4010-0028 hardened and triple heattreated; withstands over 6 tons of pulling force 4010-0060 and 11 tons of cutting force •Durable Nylonex™ sleeve protects against scratches •Chain sold separately or with Tri-Max® U-lock or integrated lock •Chains with integrated locks feature noose link so chain can be looped PART # 4010-0026 4010-0027 4010-0028 4010-0029 4010-0059 4010-0060

DESCRIPTION 3’ T-Hex chain 5’ T-Hex chain 3’ T-Hex chain w/ U-lock 5’ T-Hex chain w/ U-lock 36” / 8mm T-Hex chain w/ integrated lock 36” / 10mm T-Hex chain w/ integrated lock

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $46.95 57.95 72.95 84.95 45.95 49.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1299


SECTION

21

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ALARM CHAIN LOCK

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

•10mm hardened chain links •36” length •Push button activation and weather resistant housing •Alarm will reset itself •Includes 3 keys and batteries PART # DESCRIPTION 4010-0186 Alarm chain lock

ALARM CABLE LOCK •25mm Quadra-braid cable •72” length •Push button activation and weather resistant housing •Alarm will reset itself PART # 4010-0187

ELECTRICAL

DESCRIPTION Alarm cable lock

SUG. RETAIL $83.95

SUG. RETAIL $83.95

4010-0019

LIGHTING 4010-0018

HANDLEBARS, RESETTABLE COMBINATION PADLOCKS CONTROLS •Easy-to-use, resettable combination padlocks feature 2” W solid brass & MIRRORS bodies and hardened shackles CABLES

PART # 4010-0018 4010-0019

DESCRIPTION 1.25” x 5/16” dia. shackle 2.25” x 5/16” dia. shackle

SUG. RETAIL $17.95 19.95

MAXIMUM SECURITY PADLOCKS

PART # 4010-0021 4010-0022

TANKS & OIL FILTERS 4010-0020

4010-0023

4010-0025

FRAMES, SUSPENSION & FENDERS STAINLESS STEEL FOOTRESTS HIGH-SECURITY & LICENSE SHIELDED PADLOCKS PLATE FRAMES •70mm round padlock with 10mm hardened shackle and TIRES, exclusive armor-plated key TUBES & core for additional security, and ultra-high security WHEELS 27/8” lock with solid steel HARDWARE, body and hidden 3/8” dia. 4010-0025 CHEMICALS internal shackle for enclosed trailers, forks, cases with T-Hex™ chain & TOOLS •Ideal and cargo boxes DESCRIPTION COVERS, PART # 70mm stainless steel round padlock SECURITY 4010-0020 27/8” solid steel body padlock & GENERAL 4010-0025

1300

4010-0023 4010-0022 •Hardened-chrome steel padlocks •Commercial grade •Ideal for enclosed trailers, forks, cases with T-Hex™ chain and cargo boxes

BRAKES

DASHES & GAUGES

4010-0024

4010-0024

DESCRIPTION 50mm square body, 1.25” x 10mm shackle 50mm square body, 2.25” x 10mm shackle, rekeyable 64mm round body, 1.25” x 11mm shackle, rekeyable 64mm round body, 2.25” x 11mm shackle, rekeyable

SUG. RETAIL $17.95 17.95 24.95 24.95

WEATHER-PROOF PADLOCK •Rugged weather-resistant PVC housing covers laminated solid-brass lock body •Dual locking 11/8” x 5/16” dia. hardened shackle SUG. RETAIL $15.95 29.95

PART # 4010-0001 4010-0002

DESCRIPTION Single padlock Set of three keyed-alike padlocks

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $8.95 17.95


SECTION

21

WINDSHIELDS TOURING LUGGAGE

4010-0151

SEATS & SISSY BARS 4010-0152

4010-0156

EXHAUST 4010-0155

FUEL/AIR SYSTEMS ENGINE 4010-0189

TRANSMISSION & DRIVELINE

4010-0065 4010-0154

GASKETS & SEALS

4010-0188

DISC LOCKS •State-of-the-art disc locks feature dual motion and shock sensor that trigger a 120 dB warning siren when bike is disturbed •High-security key and barrel •No switches to think about: arms and disarms automatically •Include travel case, CR2 long-life Lithium battery, keys and pouch

4010-0080

ELECTRICAL

XX-6/XZN-6/XZZ-6/XZZ-6L •Ideal for smaller bikes and scooters •High-nickel-content stainless steel body •Push-down locking system •Ice spray-proof body and key barrel •XZZ model features painted yellow body; and XZZ-6L model features a 120 dB alarm •1.7” (42mm) of throat •0.24” (6mm) dia. hardened-steel locking pin

LIGHTING 4010-0191

XX-10/XX-14/XX-15 •Design with a flared, attack-resistant body shape •High nickel-content stainless-steel mono-block construction •The shorter, squatter body gives it a sport and streetbike-oriented fit profile •Ice spray-proof body and key barrel •XX-10 features 17/8” (46mm) of throat with 3/8” (10mm) dia. carbide-reinforced hardened-steel locking pin •XX-14 features 13/4” (44mm) of throat with 1/2” (14mm) dia. carbide-reinforced hardened-steel locking pin •XX-15 features 23/8” (60mm) of throat with 9/16” (18mm) dia. carbide-reinforced hardened-steel locking pin PART # XX-6 4010-0151 4010-0152 XZN-6 4010-0155 XZZ-6 4010-0156 XZZ-6L-Y 4010-0189 XX-10 4010-0153 XX-14 4010-0154

DESCRIPTION Yellow Stainless

SUG. RETAIL $84.95 89.95

Yellow

79.95

Yellow

84.95

Yellow

75.95

Yellow

105.95

Stainless

114.95

XN-15

XN-18

•Features re-inforced carbide substructure •0.5” (14mm) dia. •120 dB warning siren locking pin •Flashing blue LED armed signal •2.5” (62mm) of throat •Fortified barrel with carbide underpinning •Features high-nickel•Four-pin locking system content stainless •Fully removable unique key barrel steel body •2.6” (65mm) of throat •Double-barrel •0.72” (18mm) dia. locking pin locking system PART # DESCRIPTION SUG. RETAIL XX-15 4010-0188 Stainless $106.95 XN-15 4010-0065 Stainless 109.95 XN-18 4010-0080 Carbide 199.95 REPLACEMENT BATTERY 4010-0075 For use with 10, 14, 15 and XR1 series disc-lock alarms (contains 6-pk. of LR44 alkaline) 6.95 4010-0191 For use with XX series and XN18 disc-lock alarms (contains one CR2 lithium battery pack) 6.50

SECURITY CHAIN •10mm hardened-steel chain with sleeve •Enlarged end to increase effective fit with XENA disc-lock alarms, Bullett-Lock alarms series, XGA ground anchor and claw disc-lock adaptors •150cm (59”) long PART # DESCRIPTION SUG. RETAIL 4010-0190 Security chain $84.95

All part numbers in BOLD MAGENTA are new for 2011.

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1301


SECTION

21

WINDSHIELDS TOURING LUGGAGE

4010-0203 4010-0200

SEATS & SISSY BARS 4010-0204

EXHAUST FUEL/AIR SYSTEMS

NEW YORK CHAIN LOCKS •Protect against lift-away, ride-away, tow-away and roll-away thefts •High-security disc-style cylinders •Hardened double deadbolt design gives enhanced protection against twisting attacks •Each lock features hook-n-loop fasteners to hold the nylon in place

NEW YORK LEGEND CHAIN AND NEW YORK PADLOCK

ENGINE

4010-0206

•15mm round chain links constructed of 3t hardened steel •16mm MAX-Performance, reinforced, shrouded steel shackle •Includes a New York Padlock and three stainless steel “I” keys

NEW YORK FAHGETTABOUDIT® CHAIN AND NEW YORK DISC LOCK®

TRANSMISSION & DRIVELINE

•14mm six-sided chain links constructed of 3t manganese steel •15mm MAX-Performance steel shackle •Includes a New York Disc Lock and three stainless steel keys: two “I” keys and one with LED bulb for low light situations

NEW YORK CHAIN® AND EVOLUTION™ SERIES 4 DISC LOCK

GASKETS & SEALS

•12mm six-sided chain links constructed of 3t manganese steel •14mm MAX-Performance steel shackle •Includes an Evolution™ Series 4 Disc Lock and three stainless steel keys: two “I” keys and one with LED bulb for low light situations

NEW YORK NOOSE® AND EVOLUTION™ SERIES 4 DISC LOCK

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

•12mm six-sided chain links constructed of 3t manganese steel including a larger cinch ring •14mm MAX-Performance steel shackle •Includes an Evolution™ Series 4 Disc Lock and three stainless steel keys: two “I” keys and one with LED bulb for low light situations PART # DESCRIPTION SUG. RETAIL NEW YORK LEGEND CHAIN AND NEW YORK PADLOCK 4010-0200 5’ $208.95 4010-0201 3’ 159.95 NEW YORK FAHGETTABOUDIT® CHAIN AND NEW YORK DISC LOCK® 4010-0202 5’ 156.95 4010-0203 3.25’ 125.95

SUG. RETAIL $141.95 89.95 119.95 86.95

STRONGHOLD ANCHOR NEW YORK LOCK U-LOCKS ®

•Double security with oversized hardened steel sleeve, double deadbolt and high-security disc-style cylinder •Sliding dust cover protects and extends the life of the cylinder •Oversized hardened steel sleeve over the crossbar for enhanced security •Feature a protective vinyl coating •Include three stainless steel keys, one of which is lighted with a high-intensity bulb and replacement battery 4010-0193 •PART #4010-0193 features an 18mm hardened MAXPerformance steel shackle and PART #4010-0194 and 4010-0195 feature a 16mm hardened MAX-Performance steel shackle to resist leverage attacks and bolt cutters

FRAMES, SUSPENSION PART # DESCRIPTION & FENDERS 4010-0193 Fahgettaboudit (3.25” x 6”) STD (4” x 8”) FOOTRESTS 4010-0194 4010-0195 LS (4” x 10.25”) & LICENSE PLATE FRAMES NEW YORK DISC LOCK® •14mm hardened MAX-Performance steel shackle TIRES, •Features a patented, hardened steel sleeve over TUBES & the crossbar for extra security WHEELS •Protective vinyl coating •Double deadbolt design and high-security discHARDWARE, style cylinder with sliding dust cover protector CHEMICALS •Protective pouch for transport and storage and a disc lock reminder included & TOOLS •Includes three stainless steel “I” keys, one of which has an LED bulb for low light situations COVERS, DESCRIPTION SECURITY PART # 2.2” x 2.3” & GENERAL 4010-0209 ®

1302

PART # DESCRIPTION NEW YORK CHAIN® AND EVOLUTION™ SERIES 4 DISC LOCK 4010-0204 5.5’ 4010-0205 3.25’ NEW YORK NOOSE® AND EVOLUTION™ SERIES 4 DISC LOCK 4010-0206 4.25’ 4010-0207 2.5’

SUG. RETAIL $99.95 88.95 92.95

•Permanent locking point for indoor or outdoor use •Attaches to ground, wall, truck or trailer bed for both commercial or residential applications •16mm hardened carbon alloy steel shackle and 5/8” cement anchor bolts install directly into the cement •Steel shackle lays flat within domed body when not in use; safe to walk or drive over •Masonry bits included PART # 4010-0243

DESCRIPTION Stronghold anchor

SUG. RETAIL $82.95

NEW YORK ARMORED DISC LOCK •Forged steel body and armored steel case provide the ultimate protection •12mm hardened MAX-Performance steel shackle •High-security disc-style cylinder with a sliding dust cover for protection •Features a double deadbolt locking mechanism •Includes three stainless steel “I” keys and protective pouch for transport and storage PART # 4010-0210

DESCRIPTION .43” x 2.95”

SUG. RETAIL $69.95

NEW YORK LOCK® 14P DISC LOCK •Extreme security for high theft locations •14mm hardened MAX-Performance steel pin rotates to resist attacks •Features a reinforced steel shell and high-security disc-style cylinder •Sliding dust cover protects cylinder •4-point pin retention system for increased holding power •Includes three stainless steel “I” keys and protective pouch for transport and storage SUG. RETAIL $71.95

PART # 4010-0211

DESCRIPTION .39” x 1.57”

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $64.95


SECTION

21

WINDSHIELDS EVOLUTION™ SERIES 4 U-LOCKS

4010-0223

•14mm hardened MAX-Performance steel shackle resists leverage attacks and bolt cutters •Double security with double deadbolt and highsecurity disc-style cylinder with over 1 million key variations •Reinforced anti-drill/pull cylinder protection system 4010-0196 •Sliding dust cover protects and extends 4010-0197 the life of the cylinder •Enhanced internal engineering to resist twist attacks and center key location and dual overhead cam locking mechanism •Include three stainless steel keys, one of which is lighted with a highintensity bulb and replacement battery •PART #4010-0196 features anti-rattle bumpers to help control noise during transport PART # 4010-0196 4010-0197

DESCRIPTION STD (4” x 9”) LS (4” x 11.5”)

SUG. RETAIL $64.95 69.95

4010-0214

TOURING

HARDWIRE™ CABLE LOCKS •High-security disc-style cylinder with anti-drill guard and over 1 million key variations •Reinforced lock head construction with Kryptonite’s “TALON” lock pin retention system for extra holding power •Lock head rotates 360° for easier handling during lock up and removal •Weatherproof vinyl protects surface of bike/vehicle •Dual sliding cylinder weather guards with automatic close •PART #4010-0223 and 4010-0224 include hook-n-loop retention straps for extra stability in transport •Include two stainless steel “I” keys PART # 4010-0223 4010-0224 4010-0225

DESCRIPTION 6’ x 20mm 2.75’ x 20mm 6’ x 15mm

SUG. RETAIL $61.95 42.95 52.95

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

4010-0217

4010-0212 •14mm hardened MAX-Performance steel shackle and high-security, disc-style cylinder with over 1 million key variations •Sliding dust cover protects cylinder •Double deadbolt and reinforced anti-drill/pull cylinder protection system •Includes three stainless steel keys, one of which is lighted with a highintensity bulb and replacement battery •Disc locks measure 1.8” x 2.1” •Disc Lock Premium Pack, PART #4010-0212, includes a protective pouch for transport and storage and a disc lock reminder SUG. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL DISC LOCK PREMIUM PACK DISC LOCKS (CONT) 4010-0212 Orange $56.95 4010-0214 Red $51.95 DISC LOCKS 4010-0215 Yellow 51.95 4010-0213 Black 51.95

KRYPTOLOK® SERIES 2 U-LOCKS •13mm hardened Performance steel shackle resists leverage attacks and bolt cutters •High-security Bent Foot™ design for serious protection •Feature a patented deadbolt locking mechanism, pick- and drill-resistant disc4010-0198 style cylinder and enhanced internal 4010-0199 engineering to resist twisting and leverage attacks •Offset key location and overhead cam locking mechanism resist attacks •Rotating dust cover protects and extends the life of the cylinder •Include two stainless steel “I” keys for easier operation DESCRIPTION STD (4” x 9”) LS (4” x 11.5”)

SUG. RETAIL $38.95 40.95

•Compact, weatherproof and lightweight •Feature dual-reinforced, highsecurity, disc-style cylinder •5mm pin diameter fits smaller 4010-0220 vent holes •Includes two stainless steel “I” keys and a pouch with belt clip for easy transporting •Available in chrome or yellow •Measures 1.4” x 6mm

•Stapler-style disc lock with a 10mm pin diameter for better protection •Constructed of hardened drop-forged steel which resists cutting, sawing and freezing •Dual-reinforced, high-security, disc-style cylinder •Includes two stainless steel “I” keys and pouch with belt clip for easy transporting •Available in chrome, yellow or orange SUG. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL 4010-0217 Chrome $41.95 4010-0219 Orange $41.95 4010-0218 Yellow 41.95

•13mm hardened Performance steel shackle •High-security, disc-style cylinder with rotating dust cover for protection •Features a reinforced sleeve over the crossbar for added security •Includes two stainless steel “I” keys PART # 4010-0216

KRYPTOFLEX LOOPED CABLES

SUG. RETAIL $27.95 27.95

DESCRIPTION 1.7” x 1.9”

SUG. RETAIL $33.95

LIGHTING

BRAKES

®

•Braided steel cable is tough against cuts •Double looped 4010-0238 cable for use with 4010-0236 all Kryptonite U-Locks, disc locks and padlocks •Feature a protective vinyl cover •PART #4010-0237 and 4010-0238 include a hook-n-loop strap for easy transportation •PART #4010-0239 is perfect for helmet D-rings and riding gear DESCRIPTION 30’ x 10mm 7’ x 10mm 4’ x 10mm 2.5’ x 5mm

SUG. RETAIL $30.95 11.95 8.95 6.95

•8mm four-sided chain links and pass-through end link for easier padlock attachment •70mm stainless steel padlock with armor protected shackle and deadbolt locking mechanism •Features a durable, protective nylon cover PART # 4010-0208

ELECTRICAL

CABLES

KEEPER 880 CHAIN AND PADLOCK 4010-0221

GASKETS & SEALS

HANDLEBARS, CONTROLS & MIRRORS

KRYPTOLOK® SERIES 2 DISC LOCK

PART # 4010-0236 4010-0237 4010-0238 4010-0239

KEEPER 5 DISC LOCKS

DESCRIPTION Chrome Yellow

TRANSMISSION & DRIVELINE KRYPTOLOK® DFS 10 DISC LOCKS

EVOLUTION™ SERIES 4 DISC LOCKS

PART # 4010-0220 4010-0221

4010-0219

4010-0215

4010-0213

PART # 4010-0198 4010-0199

4010-0218

DESCRIPTION 2.6’

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $26.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1303


SECTION

21

WINDSHIELDS TOURING KRYPTOFLEX® CABLE LOCKS

LUGGAGE

•Flexible braided steel cable is more resistant to attacks •Feature hook-n-loop retention strap for stability during transport

4010-0228

KEY CABLE LOCKS

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

•Advanced cylinder and dual sliding cylinder weather 4010-0226 guards with automatic close feature 4010-0230 4010-0233 •Lock head rotates 360° for easier handling during lock up and removal •Include two reversible stainless steel keys •PART #4010-0229 is a self-coiling and flexible, twisted steel cable that includes a double deadbolt, hardened steel shackle key padlock

COMBINATION CABLE LOCKS •4-digit resettable combination lock with indexed number dials for error-free setting •Integrated, adjustable spline attachment rotates up to 240° for a greater number of possible lock carrying positions •PART #4010-0233 is a self-coiling and flexible, twisted steel cable with a protective cover and 4-digit resettable locking head PART # DESCRIPTION KEY CABLE LOCKS 4010-0226 2’ x 15mm 4010-0227 6’ x 12mm 4010-0228 6’ x 10mm

SUG. RETAIL $25.95 24.95 20.95

PART # DESCRIPTION KEY CABLE LOCKS (CONT) 4010-02291 6’ x 8mm COMBINATION CABLE LOCKS 4010-0230 2’ x 15mm

SUG. RETAIL $13.95 25.95

PART # COMBINATION 4010-0231 4010-0232 4010-0233 1

GASKETS & SEALS R4 CABLE LOCK

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

Includes a padlock.

STEEL PADLOCKS

TRANSMISSION & DRIVELINE

ELECTRICAL

DESCRIPTION SUG. RETAIL CABLE LOCKS (CONT) 6’ x 12mm $24.95 6’ x 10mm 20.95 5’ x 8mm 12.95

•2.6mm vinyl-coated steel retracting cable •Lock features a 4-digit resettable combination with easy-grip dials •Patented anti-reset button prevents accidental resetting •Comfortable, rubber grips provide easy handling even in snow and ice conditions •Features a detachable LED light for visibility in low light situations PART # DESCRIPTION SUG. RETAIL 4010-0234 3’ x 2.6mm $21.95

•Bright orange cable prevents riding before the disc lock is disengaged •Flexible, tightly coiled cable loops from your disc lock to your handlebar •Designed for use with Kryptonite disc locks •Measures 4.3’ DESCRIPTION 4.3’

PART # DESCRIPTION KEY PADLOCKS 4010-0241 Basic (44mm) 4010-0240 Stainless shrouded round (70mm) COMBINATION PADLOCK 4010-0242 “Gripper” (50mm)

SUG. RETAIL $8.95 20.95 6.95

KEEPER 512 COMBINATION CABLE LOCK

DISC LOCK REMINDER

PART # 4010-0222

•Basic 44mm packlock includes two keys •Shrouded round padlock features a deep-welded body with 70mm armor protected shackle and 4010-0240 5-pin brass cylinder; 4010-0242 includes two stainless 4010-0241 steel keys •”Gripper” is a standard right-left-right combination padlock with a 50mm steel body with hardened steel shackle

•Great for locking quick-release components and accessories •5mm self-coiling and flexible twisted steel cable •4-digit, pre-set combination •Features a protective vinyl cover SUG. RETAIL $7.95

PART # 4010-0235

DESCRIPTION 4’ x 5mm

SUG. RETAIL $6.95

TANKS & OIL FILTERS DASHES & GAUGES

1703-3000 DS-244012

FRAMES, DS-244013 SUSPENSION & FENDERS LOCK MOUNT FOOTRESTS LOCKSTER™ •Secures a padlock on the motorcycle when it’s not being used & LICENSE •No drilling required; simply use an existing bolt hole PLATE FRAMES •Install on the forward frame yoke below the steering pin, on one of the DISC LOCK HOLDER highway peg mounting plate bolts or even on some sissy bar bolts on •Chrome-plated billet aluminum TIRES, rubber-mounted chassis •Features 3/8” or 1/2” mounting hole for various mounting options TUBES & •Installation on a rigid mount chassis may include a forward frame yoke, cross bracket, fork leg trim lower bolt or the upper safety bar bolt •Available for 31/4” long locks by 1” wide (long style) or WHEELS •Polished stainless steel mini disc locks 2” long by 1” wide (short style) •Sold each HARDWARE, •Fits H-D logo locks, Master Lock model 220 and American lock model H-10 (locks sold separately) •Made in the U.S.A. CHEMICALS •Patented design PART # DESCRIPTION & TOOLS •Made in the U.S.A. 1/2” MOUNTING HOLE DESCRIPTION SUG. RETAIL 1703-3000 Long style COVERS, PART # Lockster only (ea.) $28.95 3/8” MOUNTING HOLE SECURITY DS-244012 Master Lock model 220 only (ea.) 46.95 1703-3001 Short style & GENERAL DS-244013

1304

All part numbers in BOLD MAGENTA are new for 2011.

1703-3001

SUG. RETAIL $36.95 36.95


SECTION

21

WINDSHIELDS TOURING LUGGAGE 4020-0075

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING 4020-0073

HANDLEBARS, CONTROLS & MIRRORS

rLINK SR-i1100SE GPS/GPRS SECURITY SYSTEM •Incorporates advanced theft prevention, real time GPS tracking, and SMS alerts with programs that allow riders to document and share their riding experience •Alarm functions and user features are controlled by the included remote, the free iPhone® app, or from your computer or smartphone (not included) •System includes a remote transceiver, main control module, RFID antenna, built-in battery backup, three-stage perimeter sensor, 120 dB Smart Siren, universal installation kit, accessory harness and main harness NOTE: rLiNK requires a data plan to be fully functional. Theft tracking is free for the first year, with an activation fee. Unlimited tracking, mapping and SMS alerts are available for an additional monthly charge. For more information on the activation fee and data plans please visit www.rlink.com.

STANDARD FEATURES: GPS

SECURITY •Two-way communication with unlimited range •Includes 120 dB Smart Siren with built-in backup battery •Single button, waterproof remote •Movement, Shock, Tilt and Ignition Alarm Notifications through text message •Motorcycle battery voltage monitor •”Hands Free” RFID controller with selectable auto/manual arming •Three-axis accelerometer measuring static and dynamic acceleration to detect motion, shock, and vibration •Includes the programmable multi-stage perimeter sensor to detect motion around the motorcycle •Ignition circuit sensor •Built-in NiMH backup battery •GPS antenna tampering detection •Optional starter disable (PART #4020-0073) allows disabling of the motorcycle’s electrical system and prevents “hot wiring” •Optional Factory Connector Kits: The rLink system is universal and will install on any motorcycle; optional OEM-compatible factory connector kits are model specific and plug directly into the factory harness making installation fast, clean and easy (sold separately; see page 1307) DESCRIPTION rLink SR-i1100SE GPS/GPRS security system

SUG. RETAIL $599.95

PART # 4020-0073

DESCRIPTION Opt. rLink starter disable

All part numbers in BOLD MAGENTA are new for 2011.

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

•Mobile Web and iPhone app for smart phone access •Police accessible theft tracking •View maps of your rides from a computer or smart phone •Receive geofence updates during a ride •Instant progress updates, top speed, and trip stats through text message •Over 1 million correlators, capable of massive parallel time/frequency space searches enabling it to find satellites instantly

PART # 4020-0075

CABLES

SUG. RETAIL $29.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1305


SECTION

21

WINDSHIELDS TOURING LUGGAGE SEATS & SR-i900R RFID/ SISSY BARS TWO-WAY FM SECURITY SYSTEM EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING

•SR-i900R provides the convenience of hands-free operation combined with a compact two-way FM paging security system designed specifically for the motorcycle industry •Standard features include two-way FM remote transceiver •RFID for hands-free operation •Auto or manual arming and disarming •Ignition circuit sensor •Long-range FM transceiver (up to a 1/2 mile) •Range and signal status display •Compact design (311/16” x 23/4” x 7/8”) •Dual-axis accelerometer for detecting impact/inclination •Built-in 120 dB multi-tone siren with soft chirp •Sensor violation display •Audible/vibrating alert •Smart Battery Safeguard with sleep mode •Motorcycle battery voltage display •Remote motorcycle finder/panic alarm •Built-in battery backup system allows the pager to operate even if wires are cut or circumvented •Includes charging cord for remote receiver •Includes programmable multi-stage perimeter sensor detect motion around the motorcycle •Includes ignition disable/anti-hijack allows disabling of the motorcycle’s electrical system and prevents “hot wiring” •Optional Factory Connector Kits: The SR-i900R system is universal and will install on any motorcycle; optional factory OEM-compatible connector kits PART # DESCRIPTION are model specific and plug directly into the factory harness making 4020-0052 SR-i900R RFID/two-way FM security system installation fast, clean and easy (sold separately; see page 1307)

SUG. RETAIL $439.95

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1306

SR-i900 RFID/TWO-WAY FM SECURITY SYSTEM •SR-i900 provides the convenience of hands-free operation combined with a compact two-way FM paging security system designed specifically for the motorcycle industry •Standard features include two-way FM remote transceiver •RFID for hands-free operation •Auto or manual arming and disarming •Ignition circuit sensor •Long-range FM transceiver (up to a 1/2 mile) •Range and signal status display •Compact design (311/16” x 23/4” x 7/8”) •Dual-axis accelerometer for detecting impact/inclination •Built-in 120 dB multitone siren with soft chirp •Sensor violation display •Audible/vibrating alert •Smart Battery Safeguard with sleep mode •Motorcycle battery voltage display •Remote motorcycle finder/panic alarm •Built-in battery backup system allows the pager to operate even if wires are cut or circumvented •Includes charging cord for remote receiver •Optional programmable multi-stage perimeter sensor (PART #SN-4) detect motion around the motorcycle (sold separately) •Optional ignition disable/anti-hijack (PART #4020-0007) allows disabling of the motorcycle’s electrical system and prevents “hot wiring” (sold separately) •Optional Factory Connector Kits: The SR-i900 system is universal and will install on any motorcycle; optional OEM-compatible factory connector PART # DESCRIPTION kits are model specific and plug directly into the factory harness making 4020-0077 SR-i900 RFID/two-way FM security system installation fast, clean and easy (sold separately; see page 1307)

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $329.95


SECTION

21

WINDSHIELDS SR-i800S RFID MOTORCYCLE SECURITY SYSTEM •Easy-to-use system provides the convenience of hands-free operation and the security of shock, tilt and ignition sensors •RFID hands-free technology eliminates reaching for the remote to protect the motorcycle •Standard features include single button, waterproof remote transceiver •RFID for hands-free operation •Auto or manual arming and disarming •Soft chirp arming •Flashing lights with trigger memory display •Ignition circuit sensor •Compact design (311/16” x 23/4” x 7/8”) •Dual-axis accelerometer for detecting impact/inclination •Built-in 120 dB multi-tone siren with soft chirp •Sensor violation display •Smart Battery Safeguard with sleep mode •Remote motorcycle finder/panic alarm •Built-in battery backup system allows the siren to operate even if wires are cut or circumvented •Optional programmable multi-stage perimeter sensor (PART #SN-4) detects motion around the motorcycle (sold separately) •Optional ignition disable (PART #4020-0007) allows disabling of the motorcycle’s electrical system and prevents “hot wiring” (sold separately) •Optional Factory Connector Kits: The SR-i800S is universal and will install on any motorcycle; optional OEM-compatible factory connector kits are PART # DESCRIPTION SUG. RETAIL model-specific and plug directly into the factory harness making 4020-0076 SR-i800S RFID security system $149.95 installation fast, clean and easy (sold separately; see below )

4020-0007

SN-4

4020-0074

TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

HD-1

ACCESSORIES AND FACTORY CONNECTOR KITS

4020-0071

•Connector kits allow all Scorpio alarms to be integrated into the OEM-style harness without any cutting or splicing •Made in the U.S.A.

CABLES

PART # DESCRIPTION ACCESSORIES 4020-0007 Ignition disabler/anti-hijack kit for PART #S 4020-0003, 4020-0034, 4020-0048 and 4020-0049 SN-4 Perimeter sensor for PART #S 4020-0003, 4020-0031 and 4020-0049 4020-0074 Smart Siren for rLINK SR-i1100 (already included w/ SR-i1100SE)

SUG. RETAIL

$29.95 49.95

PART # DESCRIPTION FACTORY CONNECTOR KITS 4020-0054 For 07-09 FLHT, FLHR, FLHX, FLTR HD-1 For 97-03 XL, 97-09 FXST/FLST, Dyna, 97-06 FLHT, FLHR, FLHX, FLTR 4020-0022 For 04-09 XL 4020-0071 For 04-09 VRSC/VRSCD

SUG. RETAIL $24.95 24.95 24.95 29.95

59.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

CYCLE ALARM WITH REMOTE TRANSMITTER •Powerful five-tone 120 dB piezo siren •Remote transmitter operation •Adjustable shock sensor with seven levels of sensitivity to match your surroundings •Programmable five-tone siren allows you to pick the siren tone you want •Warn-away mode sounds warning prior to full alarm activation •100% waterproof •Panic feature enables you to activate the alarm siren from up to 100’ away PART # •Includes everything needed for a simple under-20-minute installation 4020-0019 •Made in the U.S.A.

DESCRIPTION Cycle alarm w/ remote transmitter

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $114.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1307


SECTION

21

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST ROAD GLIDE TWEETER POD

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

•Replaces factory speedo/tach bezel to add 1” custom tweeters •Includes all plug-and-play wiring and two sets of grilles for easy customizing •Disassembles easily to paint-match custom-painted fairings •Custom-designed 50 watt (RMS) high-efficiency metalized dome tweeters with 3rd order (18 dB) passive crossovers •Will work on 06-11 stock systems, amplified systems or aftermarket car radios •98-05 models require an amp; included in PART #s 4405-0171 or 4405-0206 or an aftermarket car radio NOTE: Patent pending. PART # 4405-0205

DESCRIPTION For 98-11 FLTR models

ELECTRICAL

SUG. RETAIL $199.95

Shown w/custom paint

LIGHTING HANDLEBARS, “HOG-POD” FLHT/FLHX CONTROLS DASH TRIM/TWEETER POD & MIRRORS •Complete add-on tweeter kit CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1308

•Doubles as a fairing accent piece with decorative chrome trim (included) •Pod comes “satin black” to match stock inner fairings (as shown) •Disassembles easily to paint-match custom-painted fairings •Black “see through” grilles can also be painted, chromed •Second set of cloth covered grilles included •Works with all Hogtunes speaker systems, 98-11 stock systems or bikes with aftermarket car radios •Includes custom-designed 50 watt (RMS) high-efficiency metalized dome tweeters with 3rd order (18 dB) passive crossovers •Radically improves clarity and performance of your audio system •All mounting hardware, drilling template and plug-and-play wiring is included in box PART # DESCRIPTION 4405-0172 For 98-11 FLHT/FLHX /H-D FL Trike models U.S. Patent #D602,478.

SUG. RETAIL $189.95

BIG ULTRA KIT •Designed for any 98-11 Ultra Classic but can be used on 98-11 FLHX with King Tour Paks and rear speaker boxes PART #4405-0229 •Kit includes 2 ohm “Hybrid” front and rear speakers and the all-new NCA (Not Car Audio) 40.4 amplifier •Features MAXXBASS® and a circuit that makes each speaker sound bigger than it really is •The amp will easily mount on top of the radio inside the fairing and produces a total of 160 watts (40 watts rms x 4) •Can be easily configured for future system expansion •The fan-cooled amplifier case features a “dish” cut into it, where the main speedometer/tachometer harness “rests” •Wire harness is 100% plug-and-play •Includes everything needed to complete the installation process PART # 4405-0210

All part numbers in BOLD MAGENTA are new for 2011.

DESCRIPTION Big Ultra kit

SUG. RETAIL $559.95


SECTION

21

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS

BIG RG ROAD GLIDE ULTRA AMP/ SPEAKER KIT •Includes 160 watt 4-channel NCA 40.4 amp, 5” x 7” front speakers with new grilles, rear speakers, amp mount plate and 100% plug-and-play wire harness •Compatible with tweeter pod PART #4405-0205 PART # DESCRIPTION SUG. RETAIL FOR 11 FLTRU AND 98-11 FLTR W/ KING TOUR PAKS AND REAR SPEAKER BOXES INSTALLED (PART #4405-0229) (EXCEPT CVO) 4405-0228 Amp and speaker kit $599.95

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

“3-WAY FOR THE FREEWAY” COMPLETE 6-SPEAKER SYSTEM FOR ULTRAS •Stock four-speaker system goes to an amplified six-speaker system •Comes with fairing lower speaker adapters, three pairs of Hogtunes speakers, Hogtunes amplifier with MAXXBASS® to power front four speakers and all required hardware •100% plug-and-play harness with quick-disconnects for lowers •Fairing lower speakers angled upwards for rider and passenger •System not compatible with any external amplifiers PART # DESCRIPTION 06-11 FLHTCU/FLHTCUTG MODELS (EXCEPT CVO) WITH HARMON/KARDON “ADVANCED AUDIO” RADIO 4405-0135 Ultrasound™ “3-way for the freeway” complete audio system

SUG. RETAIL $549.95

REPLACEMENT FRONT AND REAR SPEAKERS •Replacement speakers for 98-10 models play at a minimum of 20% louder than previous models •Increased tweeter size from .75” to 1” provides even more presence in mid-range and high-range frequency at highway speeds •A lighter speaker cone and the “Hybrid Magnetic Assembly” helps overall volume •Conservatively rated at 50 watts RMS power handling (100 peak) •Sold in pairs PART # DESCRIPTION SUG. RETAIL FOR 06-11 FLHT, FLHX, FLTR AND H-D FL TRIKE 4405-0169 2 ohm front speakers $109.95 4405-0170 2 ohm rear speakers 109.95 FOR 98-05 FLTR, FLHT, FLHTC OR 98-10 BIKES WITH CAR RADIOS 4405-0167 5.75 ohm front speakers 109.95 4405-0168 5.75 ohm rear speakers 109.95

4405-0169

All part numbers in BOLD MAGENTA are new for 2011.

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1309


SECTION

21

WINDSHIELDS TOURING LUGGAGE 160 WATT NCA 40.4 AMP

SEATS & SISSY BARS ROAD GLIDE SPEAKER AMPLIFIER KIT

EXHAUST FUEL/AIR SYSTEMS ENGINE

•Features custom replacement grilles with 2 ohm Hogtunes hybrid 5”x7” speakers •Takes full advantage of large factory grille opening •Includes 32 watt/channel 24.2 amp with MAXXBASS®, plug-and-play wire harness, Road Glide adapter kit and everything needed for an easy installation •Amplifier features an “expansion port” that allows speaker pod kit to plug in should rear speakers be required (speaker pod kit sold separately) PART # DESCRIPTION SUG. RETAIL 4405-0206 For 98-11 FLTR $379.95

•40 watt x 4-channel, fairing mounted amplifier •For use with 2 ohm speakers •A perfect upgrade for those who have upgraded their speakers on 06-11 models •Compatible with tweeter pods PART #s 4405-0172 and 4405-0205 •Not for use with factory tour pak mounted amps installed (CVO) •Adapter kit PART #4405-0232 is required on all Road Glide models PART # DESCRIPTION SUG. RETAIL 4405-0231 40 watt x 4-channel amplifier $349.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS 902.2 AMP AND FRONT SPEAKER KIT

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

•Amp and speaker kit includes USA 24.2 Amplifier with MAXXBASS®, new 902.2-AA speakers with all new “hybrid” magnet, 100% plug-and-play wire harness with built in “expansion port” for future upgrades •Included speakers have new tweeters 25% larger than previous model for much better mid-range and high-frequency at highway speeds NOTE: RG adapter kit PART #4405-0096 is required for all FLTR Road Glides. PART # DESCRIPTION SUG. RETAIL FOR 98-11 FLHT/FLHX/FLTR/H-D FL TRIKE WITH FACTORY RADIO 4405-0171 Amp and front speaker kit $339.95

FAIRING LOWER SPEAKER KIT •For use on bikes with fairing lowers •Radio runs all existing speakers, and supplied amp runs fairing lower speakers •Includes Hogtunes 24.2 amp, one pair of 51/4” Hogtunes speakers, fairing lower speaker adapters, and plug-and-play harness •Compatible with CVO Ultras PART # DESCRIPTION SUG. RETAIL FOR 98-11 DRESSERS AND H-D FL TRIKE W/ FLHT-STYLE OEM FAIRING LOWERS (EXCEPT 98-09 FLTR) 4405-0134 Amplified fairing lower speaker kit w/ amp $379.95

FRAMES, SUSPENSION & FENDERS 7” WOOFER KIT •Includes 2 ohm 7” FOOTRESTS woofers and all & LICENSE required hardware PLATE FRAMES •A wire harness to plug into the rear TIRES, channels of amplifier TUBES & PART #4405-0231 is also included WHEELS •For use with HARDWARE, FLTR SPEAKERS Hogtunes 40.4 amp PART #4405-0231 CHEMICALS •Includes 2 ohm 5”x7” replacement speakers •Requires FLHT-style & TOOLS with grilles and all required hardware vented fairing lowers •For use on 06-11 FLTR Road Glides with factory radio or on any 98-05 non-CVo Road Glide models with Hogtunes amp COVERS, PART # DESCRIPTION DESCRIPTION SUG. RETAIL 4405-0233 For 98-11 Dressers and H-D FL Trike SECURITY PART # For 06-11 FLTR models $129.95 (except 98-09 FLTR) & GENERAL 4405-0230

1310

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $219.95


SECTION

21

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS

MEMPHIS SHADES SPEAKER SYSTEM KIT •Includes custom “pod” with dual 4.25” speaker, 50 watt amp with USB charge port, audio perch with built-in volume control and all required hardware and wiring •Fits all Memphis Shades Batwing fairings •Kit may not fit if gauges, etc. are riser mounted

PART # 4405-0218

DESCRIPTION Memphis Shades speaker system kit

MA-2 “ROUND TOWN” HANDLEBAR MOUNTED SPEAKER SYSTEM

SUG. RETAIL $399.95

FUEL/AIR SYSTEMS

iPod not included

•Play music on bikes with 7/8”, 1” or 11/4” diameter handlebars •Uses your MP3 player, satellite radio receiver or similar portable audio device •2” custom-designed speakers in chromed “bullet” cabinets •Includes a 50W “hide-able” amplifier with MAXXBASS® •Digital volume control is built into the system •Charge your audio device or cell phone with the USB Port •Comes with a customizable clear/ paintable sleeve for the speaker cabinets •Universal audio input from headphone jacks •Requires 12V negative-ground charging system with battery •Audio device shown not included

EXHAUST

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL PART # 4050-0034

DESCRIPTION Handlebar mounted speaker system

SUG. RETAIL $399.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

REAR SPEAKER PODS •Kit includes vinyl covered rear speaker pods, grilles, mounting hardware and wire harness for PART #4405-0231 •Also include wiring for bikes with car radios •Holds Hogtunes front or rear model speakers

CABLES BRAKES

NOTE: If using radio to power rears, speakers must be ohms specific for model bike. PART # DESCRIPTION 4405-0229 For 98-11 models w/ radio and King tour boxes

AMPLIFIER MOUNTING KIT SUG. RETAIL $189.95

•Mounts 2-channel amp between radio and speaker in FLT/ FLHT/X models •Allows 4-channel amp and 2-channel amp to be used for 6-channels of power •Kit includes steel mounting plate, and all required hardware PART # 4405-0234

4405-0232

SUG. RETAIL $39.95

AUDIO CABLE 4405-0096

ROAD GLIDE ADAPTER KITS •PART #4405-0232 is required if installing 4-channel amp PART #4405-0231 in FLTR models •PART #4405-0096 is required if installing Hogtunes USA 24.2 in FLTR models •Kits include steel mounting plates, wire harnesses and all required hardware PART # 4405-0232 4405-0096

DESCRIPTION 2-channel side plate

DESCRIPTION 4-channel amp adapter 2-channel amp adapter

SUG. RETAIL $39.95 39.95

•One-meter stereo audio cable with 90° ends •Connects your MP3/ Satellite radio/GPS to the “aux in” on your bike’s radio •High-quality goldplated connectors •Fully shielded for noise-free performance •Sold each PART # 4401-0072

All part numbers in BOLD MAGENTA are new for 2011.

DESCRIPTION Audio cable

SUG. RETAIL $14.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1311


SECTION

21

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST 4401-0094

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

4401-0095

TITAN XL TURNKEY RADIO PACKAGES •Features BIG 61/2” front speakers •High-performance Sony AM/FM radio, compatible with HD Radio™and satellite radio, with CD player and front USB and AUX input generates 52 watt x 4-channel •Includes radio, Biketronics Titan-Hertz 61/2” high-performance front speakers, mounting kit and electronic module for OEM handlebar radio control switches with AVC (auto-volume control) and Biketronics radio splash cover •Two-speaker radio packages for FLHT, FLHTC and FLHTCU models also come with Biketronics front speaker Power Grills •Four-speaker radio package for FLHT and FLHTC models also includes one pair of 51/4” rear speakers (requires OEM rear speaker pods) •Easy installation – bolt-in, plug-in and go NOTE: Installation of four-speaker systems on bikes with CB radios will eliminate the CB intercom or rear pod switch functions.

GASKETS & SEALS

PART # FOR 98-11 FLHT AND FLHTC 4401-0093 4401-0095

DESCRIPTION 2-speaker 4-speaker

SUG. RETAIL $679.98 789.95

ELECTRICAL

PART # FOR 96-97 FLHT AND FLHTC 4401-0094 FOR 98-11 FLTR 4401-0096

4405-0215

LIGHTING

DESCRIPTION

SUG. RETAIL

2-speaker

$679.98

2-speaker

679.95

4405-0216

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES 61/2” TITAN XL SPEAKER UPGRADE KIT WITH UNIVERSAL TITAN AMPLIFIER

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1312

•61/2” Titan XL speaker upgrade and Titan 2-channel UcD (Universal Class-D) amplifier combo •Titan XL speakers provide significant increase in bass, mid- and high-range sound over stock speakers; 3 ohm, 100-watt continuous power (200-watt peak) •Two-channel 75-watt universal Titan UcD audio amplifier features StatorGuard™ power regulation for unsurpassed charging system protection •Speakers sold in pairs NOTE: Speakers fit 96 and later FLHT and all FLTR Harley front speaker applications; 96 and 97 FLHT models with stock speakers may require inner fairing supports OEM #s 58938-96B and 58939-96B. PART # 4405-0215

DESCRIPTION For 96-11 FLHT models

SUG. RETAIL $599.95

PART # 4405-0216

DESCRIPTION For 98-11 FLTR models

SUG. RETAIL $599.95

TITAN POWERBLOCK AUDIO AMPLIFIER •Smallest, clearest, most powerful mobile amplifier system available; packs 180-watts RMS per-channel •Expandable so you can start with two channels and add additional channels as needed; easily accepts additional speakers on each channel •Powered by patented “UcD” (Universal Class-D) technology •Protects charging system with StatorGuard™ technology •Easy installation with plug-and-play simplicity using factory connectors •Designed and manufactured in the U.S.A. PART # 4401-0056

DESCRIPTION Titan PowerBlock amplifier

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $499.95


SECTION

21

WINDSHIELDS TOURING LUGGAGE TITAN UCD AUDIO AMPLIFIERS •Two-channel 75-watt RMS/channel (4-ohms) amp provides the extra punch needed for motorcycle applications •Provides maximum sound at a fraction of the power draw •Compact water-resistant unit easily tucks away under fairing •Easy installation with plug-and-play simplicity using factory connectors •Made in the U.S.A.

4401-0018

PART # 4401-0018 4401-0026

DESCRIPTION For 94-05 H-D touring bikes Universal

SUG. RETAIL $399.95 399.95

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

4401-0075

RETRO RADIO CD/RADIO ADAPTER KITS •Allows the installation of a Sony CD/MP3/XM radio upgrade; PART #4401-0074 can be used with any Sony, Pioneer, JVC, Alpine or Kenwood single-DIN radio •Adapts OEM handlebar controls to the Sony radio; no modification to OEM wire harness required •Retains handlebar control and auto volume function of OEM radio •Comes complete with interface module, face plate, adapter plates and detailed instructions •Optional Splash Covers add sleek looks and protection from water; simple push-on/pull-off installation in a rugged one-piece design •Made in the U.S.A.

TRANSMISSION & DRIVELINE

4401-0001

GASKETS & SEALS ELECTRICAL 4401-0076

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

NOTE: Kits are compatible with Ultra models, but disable the CB and systems that depend on CB. NOTE: Radio is not included.

BRAKES

NOTE: Radio used with PART #4401-0074 must have "steering wheel" remote control input on the back. PART # DESCRIPTION RETRO RADIO KITS 4401-0074 For 98-11 FLTR, FLHT, 4401-0017 For 06-11 FLTR, FLHT, 4401-0001 For 98-05 FLTR, FLHT, 4401-0013 For 96-97 FLTC, FLHT,

SUG. RETAIL FLHTC, FLHTCUTG FLHTC FLHTC FLHTC

$249.95 219.95 219.95 219.95

PART # RETRO RADIO KITS 4401-0014 OPTIONAL SPLASH 4401-0075 4401-0076

DESCRIPTION (CONT) For 94-95 FLTC, FLHT, FLHTC COVERS For 96-11 FLHT, FLHTC, FLHTCUTG For 98-11 FLTR

RETRO RADIO DIN-SIZED RADIO MOUNTING KIT •Allows the use of any DIN-sized aftermarket radio to be mounted in both late model FLHT and FLTR Harley Davidson motorcycles •Installs easily with clean factory look •Can be used with Biketronics RetroRadio Nomad handlebar control kit •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 4401-0057 For 96-10 FLHT, FLTR, H-D FL Trike $44.95

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $219.95 19.95 19.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1313


SECTION

21

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

61/2" TITAN XL SPEAKER UPGRADE

4405-0189

•Takes touring audio to the next level •Provides significant increase in bass, mid- and high-range sound due to a 158% increase in speaker surface area over stock speaker •Perfect match with Biketronics Titan amplifier; can be used with stock and aftermarket radios as well •Speaker adapter (patent pending) allows transducer to tuck tightly inside fairing •Fit 96 and later Harley front applications; 96-97 bikes with stock speakers require speaker upgrade and possibly inner fairing supports OEM#s 58938-96B and 58939-96B •3 ohm, 100W continuous power (200W peak) •Feature Titan-Hertz speakers, high-power capacity and easy plug-n-play installation •Sold in pairs PART # DESCRIPTION SUG. RETAIL PART # 4405-0189 For 96-11 FLHTC, FLHTCUTG models $249.95 4405-0191

DESCRIPTION For 98-11 FLTR models

SUG. RETAIL $249.95

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS

51/4" HIGH-ENERGY COAXIAL SPEAKERS WITH POWERGRILLS •Perfect match with Biketronics Titan amplifier; can be used with stock and aftermarket radios as well •Fit 96 and later Harley front applications; 96-97 bikes with stock speakers require speaker upgrade and possibly inner fairing supports OEM#s 58938-96B and 58939-96B •3 ohm, 70W continuous power (140W peak) •Feature Titan-Hertz craftsmanship and easy plug-n-play installation •Sold in pairs PART # DESCRIPTION 4405-0155 For 96-11 FLHTC, FLHTCUTG models

SUG. RETAIL $199.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TITAN POWERGRILL™ SPEAKER ADAPTERS AND GRILLES TUBES & •Nearly double the sound from your speakers, relative to stock grilles WHEELS •Use with 51/4" speakers •Free-flowing design ensures maximum sound transfer HARDWARE, 4" MEDIUM-ENERGY COAXIAL SPEAKERS •Adapters maximize speaker angle toward riders head CHEMICALS •Feature 4 ohm, 40W continuous power (80W peak) and fit both easily with stainless steel mounting hardware front and rear & TOOLS •Also feature Titan-Hertz craftsmanship and easy plug-n-play installation •Install •Sold in pairs PART # DESCRIPTION SUG. RETAIL COVERS, •Sold in pairs For 96-11 FLT/FLHS/FLHT/FLHTC/H-D FL Trike DESCRIPTION SUG. RETAIL 4405-0158 SECURITY PART # (front applications only) $39.95 For 88-95 FLHTC/FLHTCU/FLTU models $109.95 & GENERAL 4405-0156

1314

All part numbers in BOLD MAGENTA are new for 2011.


SECTION

21

WINDSHIELDS TOURING WOOF PAK™ •Add the missing bass everyone craves with this clean system •Integrated drop-in subwoofer system is designed to fit into H-D’s King and Ultra Tour-Paks® •Form-fitted, sealed enclosure featuring JL Audio’s perfectly matched 8” 8W1 subwoofer and XD200 amplifier •Simple plug-and-play wire harness works with any audio system installed on your bike •Includes port grommet, port block-off plate, grommet support ring and complete installation instructions •Made in the U.S.A.

LUGGAGE SEATS & SISSY BARS EXHAUST

NOTE: Installation requires cutting a sound port in the front of the Tour-Pak®. PART # 4405-0217

DESCRIPTION Woof Pak™ subwoofer system

SUG. RETAIL $699.95

FUEL/AIR SYSTEMS 4405-0227

SPEAKER PODS FOR CHOPPED TOUR PAK®

TRANSMISSION & DRIVELINE

•Fit all Chopped Tour Paks and 4405-0224 will also fit King/Ultra Tour Paks •Designed to house 6.5” speakers (sold separately) •Finished in tan, black or gray SoftDash leather look or with a chrome-plated finish with black SoftDash speaker faces •Made in the U.S.A. PART # 4405-0224 4405-0225 4405-0226 4405-0227

DESCRIPTION Black leather look Chrome Gray leather look Tan leather look

ENGINE

GASKETS & SEALS ELECTRICAL

SUG. RETAIL $199.95 299.95 199.95 199.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS

DETACHABLE FAIRING ACCESSORY AUDIO KIT •Transform an everyday Cruiser into a full-on Bagger by connecting into the bike’s 12V electrical system •5.25” weatherproof speakers mounted into stylish pods easily mount into the Sportech Detachable Fairing; PART #2330-0032 •50 watt compact amplifier ensures loud, clear and full-range audio even at highway speeds •Full plug-and-play wiring harness works with most MP3 players, satellite radios and virtually any device with a standard 3.5mm earphone jack •USB cable input for charging •Conveniently positioned volume control designed to operate with gloves PART # DESCRIPTION SUG. RETAIL •Includes all necessary fasteners 2350-0146 Fairing accessory audio kit $399.95 •Complete installation instructions are included

4405-0164

THE SOUND OF CHROME™ SPEAKERS •3” diameter main speakers and additional tweeters deliver full-bodied sound •Weatherproof bullet housing has a built-in 50W amplifier and a volume control on/off switch •Swivel-adjust mounting clamps let you position the speakers any direction you choose •Wiring harness, noise purifier and standard 3.5mm audio jack included so you can simply connect your portable audio device quickly and easily •Sold in pairs SUG. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL 4405-0164 For 1” dia. handlebars $399.95 4405-0183 For 11/4” dia. handlebars $399.95

All part numbers in BOLD MAGENTA are new for 2011.

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1315


SECTION

21

WINDSHIELDS RUMBLE ROAD™ HD RAW 200 AMPLIFIER SYSTEM

TOURING

•Features a compact and heavy-duty high-gain amplifier in a machined aluminum weather-resistant housing designed specifically for powersports applications – 70 true Watts RMS per channel at 4 ohm, 13.6 VDC; 100 Watts peak per channel •Universal line-level inputs, high-level inputs to boost or upgrade factory or aftermarket stereos •Flexible electrical hookups with standard wiring •RCA jacks for input, right/left speaker outputs power in; ground and remote on RCA-to speaker adapters for use as a booster with existing amps •RCA-to-3.5mm stereo adapter for use with MP3 players and other stereo setups •Built-in ground isolator for easier wiring •Built-in power filter reduces noise •Built-in remote relay for easier control •Slotted screw holes allow for a more flexible installation •Also available with matching high-performance speakers and round acoustic baffles

4405-0202

LUGGAGE SEATS & SISSY BARS

4405-0203

EXHAUST

PART # 4405-0202 4405-0203

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

RUMBLE ROAD™ PREMIUM AMPLIFIED STEREO SPEAKERS

DESCRIPTION Rumble Road™ HD Raw 200 amplifier system Rumble Road™ HD Raw 200 amplifier system w/ speakers and baffles

4405-0001

SUG. RETAIL $299.95 349.95

4405-0002

•High-output, high-fidelity stereo speaker system produces crisp, powerful sound even at highway speeds •Attractively packaged in lustrous chrome or black spotlight shells to enhance the look of most any motorcycle •Can be installed on handlebars, crash bars, forks or other locations •Work with any portable MP3, personal stereo or satellite radio •Feature standard miniplug headphone jack •Approximately 32W continuous, 46W peak into 4 ohms at 13.6 VDC •Includes two 4” Rumble Road amplified speakers from RCA, noise filter, all audio cabling and power wiring and 3’ of black wire dressing PART # 4405-0001 4405-0115

DESCRIPTION Chrome w/ 1” mounting hardware Chrome w/o mounting hardware

SUG. RETAIL $269.95 249.95

PART # 4405-0002

DESCRIPTION Black w/ 1” mounting hardware

SUG. RETAIL $299.95

4405-0160

LIGHTING HANDLEBARS, CONTROLS RUMBLE ROAD™ & MIRRORS ULTRA AMPLIFIED

4405-0161

STEREO SPEAKERS

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

•Clear and powerful sound even at highway speeds •RCA or Blaupunkt 4” Coaxial full-range speakers •Built-in amplifiers and standard stereo mini-plug •Produces approximately 70W continuous; 100W peak; into 4 ohm at 13.6 VDC with high-gain input •Operates with or without the motorcycle running •Packaged in an attractive chrome or black spotlight shell, it does not distract from the look of the motorcycle •Features stainless steel or black grilles and all hardware included •Works with most portable MP3 players and other personal stereos featuring a standard mini-plug headphone jack •Installs easily on handlebars, spotlight mounting bars, forks or engine guards •Made in the U.S.A. PART # 4405-0160

DESCRIPTION Chrome

SUG. RETAIL $369.95

PART # 4405-0161

DESCRIPTION Black

FRAMES, SUSPENSION RUMBLE ROAD™ LIMITED NON-AMPLIFIED SPEAKERS 4405-0003 4405-0004 & FENDERS •Custom product for motorcycles with existing car-stereo setups •Attractively packaged in chrome or black spotlight shells to enhance the FOOTRESTS look of most any bike & LICENSE •Based on the Amplified Rumble Road Premium speaker system, the nonPLATE FRAMES amplified Rumble Road Limited is easily installed on handlebars, spotlight mounting bars, forks or crash bars TIRES, •Speakers work with any car-stereo system (either ground or bridged) to provide high-quality sound on the go or while parked TUBES & ohms at 105W peak/35W RMS WHEELS •4 •Includes two 4” Rumble Road non-amplified speakers from RCA, two HARDWARE, three-piece 1” mounting clamps in matching finish, wiring and 3’ of CHEMICALS black wire dressing The non-amplified Rumble Road Limited series requires an amplifier-equipped car stereo and is not & TOOLS NOTE: designed for use with personal stereos. If you plan to use a portable MP3 or other personal stereo instead COVERS, of a car stereo, check out the Amplified Rumble Road Premium speaker system PART #s 4405-0001 or 4405-0002. DESCRIPTION SUG. RETAIL PART # DESCRIPTION SECURITY PART # Chrome $169.95 4405-0004 Black & GENERAL 4405-0003

1316

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $399.95

SUG. RETAIL $199.95


SECTION

21

WINDSHIELDS TOURING

RCA TWO-WAY COAXIAL SPEAKERS •These RCA speakers are designed with volume, clarity, and weather-resistance in mind •Can be used as replacements for most factory-installed fairing speakers and aftermarket radio housing speakers •Sold in pairs PART # DESCRIPTION SUG. RETAIL 4405-0127 150W 4 ohm (5.25”) $59.95

4405-0009

LUGGAGE SEATS & SISSY BARS EXHAUST

4405-0013

FUEL/AIR SYSTEMS

•Perfect for mounting Rumble Road™ speakers on handlebars or engine guard bars •Clamps separate to slip easily over the bar to the desired mounting location •Sold in pairs PART # 4405-0009 4405-0013 4405-0010 4405-0014 4405-0012 4405-0204

4405-0162

4405-0017

THREE-PIECE CLAMP SET

DESCRIPTION chrome 7/8”, black 1”, chrome 1”, black 11/4”, chrome 11/2”, chrome

SUG. RETAIL $19.95 29.95 19.95 29.95 19.95 19.95

7/8”,

ENGINE

L-BRACKET SET •Right-angled clamps are just the ticket for vertical mounts or other space-defying installations of Rumble Road™ speakers, AudioBoss™ Audio Controller or other accessories •Available in polished stainless steel or black •Sold in pairs PART # 4405-0017 4405-0162

DESCRIPTION Polished Black

SUG. RETAIL $24.95 29.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING

ELECTRICAL NOISE FILTER

GROUND LOOP ISOLATOR

•Greatly attenuates electrical noise or whine produced by some motorcycle electrical/ignition systems •One filter is good for powering both Rumble Road™ speakers in the system PART # 4405-0007

DESCRIPTION Electrical noise filter

HANDLEBARS, CONTROLS & MIRRORS

•Suppresses any resulting noise in the audio line for those who use their bike’s battery to operate a personal stereo •Breaks the ground loop that would otherwise occur between a personal stereo and amplified speakers •A necessary accessory for some satellite radio systems SUG. RETAIL $9.95

PART # 4405-0008

DESCRIPTION Ground loop isolator

SUG. RETAIL $12.95

BRAKES TANKS & OIL FILTERS

CRANKCASE™ AUDIO CONTROLLER/ POWER SWITCH

DASHES & GAUGES

•Oversized, glove-friendly knob makes it easy to control the volume •Feel and hear the on/off switch •High-visibility blue LED •Crafted from precision-machined, lightweight billet aluminum, CrankCase measures 1.8” H x 1.7” W x 1.3” D •Chrome-plating for sparkle and shine •Sleek 1” mounting clamp hugs the tube and can be placed anywhere along it, including next to the brake or throttle controls; removable two-piece clamp allows mounting for handlebars measuring other than 1” standard •Built-in fuse (5 Amps) for internal/external power, and standard electrical hardware compatibility •Universal line-level input with 1/8” stereo plug •State-of-the-art, surface-mounted electronics •Weather-resistant PART # 4405-0070

CABLES

DESCRIPTION CrankCase audio controller

ROUND ACOUSTIC BAFFLES •Protect your speakers from water, rust, dust and electrical problems •Foam basket forms a protective layer between speaker and enclosure, reducing resonance and other distortion •Sold in pairs; available in round 5.25” sizing SUG. RETAIL $179.95

PART # 4405-0076

All part numbers in BOLD MAGENTA are new for 2011.

DESCRIPTION Round acoustic baffles

SUG. RETAIL $14.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1317


SECTION

21

WINDSHIELDS TOURING LUGGAGE 4402-0178

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

4402-0008

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1318

4402-0177

JMCB-2003B HANDLEBAR-MOUNTED CB AUDIO SYSTEM •New harness design for future J&M Bluetooth capability •Features a 40-channel CB radio, NOAA weather band, rider/passenger intercom and stereo music amplification from any portable-type music device •Mount it to your left handlebar with the proper bracket kit, connect the headset/power harness to your bike’s electrical system (choose below between solo or rider/passenger kits), install a J&M license-plate mounted CB antenna (or any other properly tuned CB antenna, sold separately), plug in your favorite J&M dual-mode helmet headset/headsets and you are ready to go •There are no other hidden black boxes to mount or clutter up your bike, as the complete system is on your handlebar (your portable music device is plugged into the system as a separate item) •All knobs and controls have been designed for ease of use while riding, even with gloves on, and in addition the unit is water-resistant so you won’t have to worry about getting caught out in the rain •Audio performance is superb, even at high speeds, and that is most impressive considering its compact size •Mounting bracket and lower-section hook-up cord sold separately •Made in the U.S.A. NOTE: The JMCB-2003B is a J&M 6-pin audio system that requires the pre-amplified microphone signal provided by our Dual Mode (ECD/ICD/BCD prefixed) helmet headsets along with the lower section hook-up cord PART # 4403-0053 or 4402-0047. PART # 4402-0177 4402-0178 4402-0008 4403-0017 4403-0053 4402-0047

DESCRIPTION JMCB-2003B kit for driver/passenger headset operation JMCB-2003B kit for solo (driver only) headset operation Mount bracket for Harleys, black Mount bracket for Harleys, polished Lower cord for PART #4402-0177 Lower cord for PART #4402-0178

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $399.95 339.95 46.95 46.95 69.95 24.95


SECTION

21

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST

4401-0087

250W AMPLIFIER KITS

FUEL/AIR SYSTEMS

•Designed specifically for use in H-D fairings with the Harman Kardon radio •Full-range class G amplifier with 125W RMS per channel, both channels driven, continuous into a 2 ohm load at 14.4vdc; 70W RMS continuous into a 4 ohm load •Mount into the top of the custom made stainless steel bracket system, which has the slots in 4401-0088 the bottom section to properly relocate the H-D CB and XM SAT radio modules, if installed •Includes custom-made plug-n-play wiring harnesses, all necessary mounting hardware and installation/operation instructions •Amplifier measures 71/4” x 43/4” X 13/4” PART # 4401-0087

DESCRIPTION For 06-11 FLTR fairings

SUG. RETAIL $449.95

PART # 4401-0088

DESCRIPTION For 06-11 FLHTCU, FLHTC, FLHX fairings

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL SUG. RETAIL $424.95

4405-0199

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

4405-0198

7.25” FAIRING SPEAKER UPGRADES •High-performance 7.25” round speakers are the largest diameter speakers that can be installed into OEM Harley fairings, with cone volume and mass comparable to a 6” x 9” speaker •140W max power •Waterproof injection-molded polycarbonate woofer cone, high-flux strength but lightweight dual-donut Neodymium magnet and high-efficiency voice coil •Grillework features mounted black or chrome tweeter and midrange, and top-quality adapter rings/bracket hardware for secure and clean mounting into the fairing •Mounting hole pattern and spade electrical connections are exactly the same as the factory specification for easy installation •Includes easy-install, adhesive-backed, inside fairing acoustic foam pads to help tighten up the bass and improve overall fairing audio resonance •Sold in pairs PART # DESCRIPTION SUG. RETAIL FOR 06-11 FLHTC, FLHTCUTG (2 OHM) 4405-0198 Black $279.95 4405-0199 Chrome 279.95

PART # FOR 06-11 FLTR 4405-0207 4405-0208

DESCRIPTION (2 OHM) Black Chrome

4405-0208

SUG. RETAIL $279.95 279.95

PART # DESCRIPTION FOR 98-05 FLHTC (8 OHM) 4405-0200 Black 4405-0201 Chrome

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $279.95 279.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1319


SECTION

21

WINDSHIELDS TOURING LUGGAGE

4401-0064

4401-0067

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

4401-0061

HIGH-PERFORMANCE FAIRING AND REAR SPEAKERS •High-performance speakers replace stock units •Superior bass response with extended mid/ high frequency range •Feature waterproof injection-molded polycarbonate cone woofer •High-flux strength Neodymium magnet •High-efficiency voice coil •Replacement grille set with mounted chrome or black mid-range tweeter •140W power •Dimensions, mounting hole pattern and spade electrical connections are exactly the same as OEM for easy mounting •Sold in pairs •Made in the U.S.A. FAIRING SPEAKERS PART # DESCRIPTION SUG. RETAIL FOR 06-11 FLHTC, FLHTCUTG (2 OHM) 4401-0063 Black $130.95 4401-0064 Chrome 130.95 FOR 98-05 FLHTC (8 OHM) 4401-0061 Black 130.95 4401-0062 Chrome 130.95 FOR 06-11 FLTR (2 OHM) 4401-0067 Black 130.95

4401-0066

PART # FOR 06-11 FLTR 4401-0068 FOR 98-05 FLTR 4401-0065 4401-0066 FOR 89-97 FLTR 4405-0209

DESCRIPTION (2 OHM) (CONT) Chrome (8 OHM) Black Chrome (4 OHM) Black

SUG. RETAIL $130.95 130.95 130.95

REAR SPEAKERS PART # DESCRIPTION SUG. RETAIL FOR 06-11 FLHTC, FLHTCUTG (2 OHM) 4405-0194 Black $189.95 4405-0195 Chrome 189.95 FOR 98-05 FLHTC (8 OHM) 4405-0196 Black 189.95 4405-0197 Chrome 189.95

69.95

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1320

4405-0100

OEM FAIRING SPEAKERS •5” high-performance speakers are direct replacements for factory speakers •Feature waterproof cones and high-efficiency voice coils •Includes grilles •Sold in pairs •Made in the U.S.A. PART # DS-319930

DESCRIPTION 96-97 FLHTC models (4 ohm)

SUG. RETAIL $79.95

REPLACEMENT REAR SPEAKERS

4405-0100

•Upgrades rear speakers to the quality of J&M front speakers •High-performance speakers are direct replacement for factory speakers •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL DS-319976 For 98-05 FLHTCU (8 ohm) $89.95 4405-0100 For 06-11 FLHTCU, FLHTCUTG (2 ohm) 89.99

FAIRING/SPEAKER ACOUSTIC PAD KITS •In-fairing acoustic pads are one of the easiest things you can do to tighten-up-the-bass and improve the overall sound quality of your fairing-mounted speakers •Acoustic foam comes with adhesive installed •Die cut for perfect fit •Include complete and detailed installation instructions

4405-0192

PART # 4405-0192 4405-0193

All part numbers in BOLD MAGENTA are new for 2011.

DESCRIPTION For 89-11 FLHT fairings For 98-11 FLTR fairings

SUG. RETAIL $36.95 36.95


SECTION

21

WINDSHIELDS TOURING 4401-0046

MSR2010 WATERPROOF DIN STEREO

4401-0049

MSR3007 SIRIUS®-READY AM/FM/CD STEREO/ FULL iPod® CONTROLS •160W (40W x 4) •Solid top chassis •Silver colored sealed faceplate •SIRIUS® XM Satellite Radio ready •40-second electronic skip protection (CD) •U.S./Euro tuner •Wired/wireless remote ready •Auxiliary audio input •Pre-amp line level outputs •Low battery audible warning •Non-volatile memory for presets and user settings •Two-wire power (acc, ground) •Full iPod® Control ready (interface cable sold separately)

•Waterproof faceplate (IPX5) •1 DIN chassis size •Front panel mount (mounting screws not included) •Single line dot matrix display with blue backlight •Two wire power (acc/gnd) •Selectable US/Euro frequency tuner •24 station presets (18 FM/6 AM); Sirius ready (GEN 3.0) •Full function iPod® controls with charging capability (requires adapter cable PART #4401-0049; sold separately, see 2010 FatBook®) •Five selectable preset equalizer (pop, jazz, classic, beat, rock) •Four speaker capable (40W x 4) •Wired remote ready •Low battery alert (10.8V trigger threshold) •Zero memory current draw •Rear auxiliary audio inputs (RCA) •Solid top chassis •Conformal coated PCB; Mylar PCB insulator •UV resistant front panel (ASTM D4329) •Corrosion resistant (ASTM117) •CE certified PART # 4401-0077

DESCRIPTION MSR2010 stereo

SUG. RETAIL $149.95

DESCRIPTION MSR3007 stereo iPod® interface cable (12’)

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

ELECTRICAL SUG. RETAIL $169.95 24.95

LIGHTING

6” HEAVY-DUTY UNIVERSAL TOP/SIDE MOUNT RUBBER MAST ANTENNA

HANDLEBARS, CONTROLS & MIRRORS

•Attached 39” cable •6” rubber mast top/side-mount antenna •Rubber gasket for watertight mounting •Withstands tough environments with its heavy-duty design •Antenna angles 45° maximum

MS5006B 5.25” DUAL-CONE MARINE-GRADE SPEAKER

PART # 4401-0050

•Sensitivity: 91dB •Frequency: 79hz-20khz •Nominal impedance: 4 ohms •Polypropylene woofer: 51/4” •Magnet: 2.9 oz. •Mounting hole diameter: 41/2”; mounting depth: 11/2” •Tweeter type: Mylar® whizzer •Max power handling: 30W •Sold each PART # 4405-0153

SEATS & SISSY BARS

GASKETS & SEALS

NOTE: Will not interface with OEM Harley radio controls. PART # 4401-0046 4401-0049

LUGGAGE

DESCRIPTION Universal 6” antenna

CABLES

SUG. RETAIL $24.95

BRAKES ELECTRONIC HIDDEN ANTENNA

DESCRIPTION Universal 5” speaker

SUG. RETAIL $18.95

TANKS & OIL FILTERS

•Finally, a hidden internal antenna that really works •Mounts inside any fiberglass or plastic fairing •Plugs into any standard AM/FM antenna jack •Requires a switched 12V power source

DASHES & GAUGES

NOTE: Antenna will not receive Weather Band frequencies. PART # DESCRIPTION DS-250034 Hidden antenna

HOGTENNA PRE-AMPED ANTENNA

SUG. RETAIL $80.95

“RUBBER DUCK” ANTENNA

•Di-pole antenna has directional gain over vertical mast antennas •Factory power connectors are used to make installation a snap on most Harley-Davidson touring bikes •Made in the U.S.A. PART # DESCRIPTION 4401-0019 HogTenna pre-amplified antenna

•Helically wound, 14” flexible black rubber antenna •Provides performance similar to longer vertical-mast antenna •Screw-on installation; attaches to the OEM radio antenna mount •Made in the U.S.A. SUG. RETAIL $39.95

PART # 4401-0027

DESCRIPTION “Rubber Duck” antenna

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $19.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1321


SECTION

21 LOW MOUNT

4402-0048

WINDSHIELDS ANTENNA

RELOCATION KITS

TOURING LUGGAGE SEATS & SISSY BARS EXHAUST

•An affordable way to relocate the antenna down low and out of the way of the detachable luggage rack or the tour pack on radio-equipped baggers •No need to change the location of the antenna every time the tour pack is installed or removed from the bike •Kit includes all hardware and polished stainless steel bracket •Mounts to the rear fender support brackets; will fit on models with saddlebag fillers •Made in the U.S.A.

4402-0070

4402-0048

PART # DESCRIPTION SUG. RETAIL 4402-0070 CB antenna mount kit 09-11 FLHT, FLHTC, FLHTCU (except H-D FL Trike) $78.95 4402-0048 CB antenna kit for 85-08 FLHT/I, FLHTC/I, FLHTCU/I 77.95

4402-0058

PART # DESCRIPTION 4402-0058 Radio antenna mount kit for 85-11 FLHT models (except H-D FL Trike)

$ 62.95

4402-0064

4401-0070

FUEL/AIR SYSTEMS

SUG. RETAIL

4402-0065

ENGINE DUAL-FUNCTION FLEXIBLE

TRANSMISSION ANTENNAS & DRIVELINE •Get range and clarity for your AM, FM and CB radio without the mileGASKETS & SEALS ELECTRICAL

high stock antenna •Compact, flexible antenna measures only 17” L •Each style is tuned for its specific mounting location – no calibration needed PART # DESCRIPTION FOR 89-11 FLHT/FLTR/FLHX AND H-D FL TRIKE W/ AM/FM RADIO AND CB KITS 4401-0070 Tour-Pak® mount 4401-0071 Frame mount

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 4402-0096

CABLES BRAKES

SUG. RETAIL

$29.95 29.95

CB/RADIO ANTENNAS •Replacement staffs have been designed specifically for the Harley CB radio cable/load system (pre-tuned for the CB, no SWR adjustment necessary) and the Harley AM/FM portion of the audio system (same antenna) for the tail-trunk mounting position only •Easy installation •Just over 1’ in length •Sold each •Made in the U.S.A. PART # 4402-0064 4402-0065

DESCRIPTION For 89-08 H-D trunk-mount position only For 09-11 trunk-mount and 89-11 rail-mount position

SUG. RETAIL $10.95 10.95

4401-0073

TANKS & OIL FILTERS 4402-0012

DASHES & GAUGES FLEXPOWER™ HIDE-

FRAMES, AWAY ANTENNAS SUSPENSION •Designed for H-D fairings & FENDERS with factory H-D or aftermarket radio or CB FOOTRESTS •Easy plug-in installation; & LICENSE no wires to cut or splice 4402-0097 detailed PLATE FRAMES •Includes installation instructions DESCRIPTION SUG. RETAIL LICENSE PLATE-MOUNT CB ANTENNA KIT TIRES, PART # •These license plate-mount CB antenna kits include a black powderTUBES & 4401-0073 AM/FM/WB hide-away antenna for 85-11 FLT, FLHT, FLTR and H-D FL Trike fairings w/ factory coated mounting bracket, 2’, 3’ or 4’ antenna staff, mounting stud, WHEELS and aftermarket radios $79.95 frame attachment grounding strap, antenna connection cable, right-angle adapter, cable ties, mounting hardware and complete HARDWARE, 4402-0096 27mhz pre-tuned CB hide-away for for installation instructions 98-11 FLT, FLHT, FLTR and H-D Trike fairings CHEMICALS •Made in the U.S.A. w/ factory H-D CB radio 79.95 & TOOLS PART # DESCRIPTION SUG. RETAIL 4402-0097 27mhz pre-tuned CB hide-away for for 4402-0012 2’ antenna kit $99.95 98-11 FLT, FLHT, FLTR and H-D FL Trike fairings COVERS, 4402-0013 3’ antenna kit 99.95 w/ J&M or other aftermarket radio using the SECURITY 4’ antenna kit 99.95 PL-259 connector 79.95 4402-0014 & GENERAL

1322

All part numbers in BOLD MAGENTA are new for 2011.


SECTION

21

WINDSHIELDS TOURING LUGGAGE

4403-0057

SEATS & SISSY BARS

4403-0062

4403-0072

EXHAUST

HS-279/284 HELMET HEADSETS •Provide the industry’s best combination of wind and ambient noise reduction with High Output (HO) AeroMike III® miniature microphones •Superior audio fidelity has been achieved with enhanced-fidelity DynaPort®, non-ported and ultra-slim helmet speakers •P-series two-piece cord system allows these headsets to be connected to any factory-installed motorcycle audio system ever built, now and in the future, just by interchanging the lower-section hook-up cord •Made in the U.S.A. SUG. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL HEADSETS HOOK-UP CORDS AND ACCESSORIES (CONT) 4403-0072 HS-279 w/ HO mike for most open face, flip-front 4402-0047 P-Series 8-pin lower-section hook-up cord for and full-coverage style helmets (universal style) $139.95 connection to 99-11 J&M 6-pin audio systems $24.95 4403-0057 HS-279 w/ HO mike for most open-faced style helmets 159.95 HC-PC P-Series 8-pin lower-section hook-up cord for connection to 89-97 H-D 5-pin audio systems 22.95 4403-0079 HS-279 w/ HO mike for most flip-face style helmets 159.95 4403-0084 HS-279 w/ HO mike for Nolan® N103 or N43 helmets 169.95 4403-0044 P-Series 8-pin lower-section hook-up cord for connection to 98-11 H-D 7-pin audio systems 24.95 4403-0085 HS-284 w/ HO mike for most shorty-style 1/2 helmets 199.95 4403-0062 Repl. windsock kit (three piece) for HOOK-UP CORDS AND ACCESSORIES 13.95 AeroMike III® miniature microphones 4403-0050 P-Series 8-pin lower-section hook-up cord with in-line volume control for connection to 99-11 J&M 6-pin audio systems 79.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

4403-0081

4403-0082

4403-0083

BRAKES

4403-0080

TANKS & OIL FILTERS HS-ECD629 SERIES HEADSETS •Feature superior ambient noise canceling, wind blocking ability and natural human voice response of the latest version of high-output (HO) AeroMike® V •Superior audio fidelity with large diameter DynaPort®, non-ported and ultra-slim helmet speakers •Z-series two-piece upper cord system allows headsets to be connected to any factory-installed motorcycle audio system simply by interchanging the lower-section hook-up cord •Made in the U.S.A.

DASHES & GAUGES

4403-0087

PART # DESCRIPTION HEADSETS 4403-0080 For full-face style helmets 4403-0081 For most flip-front style helmets 4403-0082 For most open-face (3/4) style helmets 4403-0086 For most shorty (1/2) style helmets 4403-0083 For universal application (open face/flip-front/full-face style helmets) 4403-0087 For Nolan® N103 or N43 helmets HOOK-UP CORDS AND ACCESSORIES DS-112377 Z-Series 8-pin lower-section hook-up cord for connection to 89-97 H-D 5-pin audio systems 4403-0053 Z-Series 8-pin lower-section hook-up cord for connection to 99-11 J&M 6-pin audio systems 4403-0066 Z-Series 8-pin lower-section hook-up cord w/ ear speaker for connection to 99-11 J&M 6-pin audio systems 4403-0052 Z-Series 8-pin lower-section hook-up cord for connection to 98-11 H-D 7-pin audio systems 4403-0065 Z-Series 8-pin lower-section hook-up cord w/ ear speaker jack for connection to 98-11 H-D 7-pin audio systems

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $219.95 219.95 219.95 229.95 209.95 219.95 59.95 69.95 99.95 69.95 99.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1323


SECTION

21

WINDSHIELDS ADAPTER CABLES

TOURING LUGGAGE

6-PIN HELMET HEADSET ADAPTER CABLE (PART #4403-0075)

4403-0075

•Connects to the HoppeSound radio adapter cable to allow external connection of a single helmet headset •6-pin headset jack with dust cover accepts lower section connection cords PART #4402-0047 or 4403-0053 (J&M #HC-PJM or HC-ZJM)

RADIO ADAPTER CABLE (PART #4403-0076)

SEATS & SISSY BARS EXHAUST

4403-0076

•Connects to the rear speaker channels of fairing-mounted automotive-type radio to allow external connection of a helmet headset and/or other audio devices

4403-0077

RADIO/JMCB-2003 ADAPTER CABLE (PART #4403-0077) •Connects to the AUX input plug on the J&M JMCB-2003 audio system •Allows you to rotate the fader control on fairing-mounted radio to direct the sound to the fairing speakers only, or the headset speakers only through the JMCB-2003, OR both at the same time depending on the position of the front/rear fader adjustment

PART # 4403-0075 4403-0076 4403-0077

FUEL/AIR SYSTEMS HEADSET CORDS, BOOM MICS AND HARDWARE

CB HAND MICROPHONE TRANSMISSION KIT

GASKETS & SEALS ELECTRICAL

SUG. RETAIL $73.95 20.95 114.95

DS-112354

ENGINE

& DRIVELINE

DESCRIPTION 6-pin helmet headset adapter cable Radio adapter cable Radio/JMCB-2003 adapter cable

•The helmet is left behind and the rider wants to talk on the CB; here’s the solution •Hand mic does not interfere with headset operation •Easily installs without cutting or splicing wires •Proudly made in Tucson, Arizona, U.S.A. and completely tested before packaging PART # DS-112182

DESCRIPTION For 98-11 FLHTCU models

SUG. RETAIL $59.95

•Fit a wide variety of J&M headsets as well as Drag Specialties headsets from J&M •Cords feature top-quality connectors •Hardware kit includes clamp, screws, nuts, clamp backs and hook-and-loop pieces to fit 88 and up J&M headsets •Made in the U.S.A. PART # DS-112354 DS-112107 4402-0047 4403-0061

DS-112107

4403-0061

DESCRIPTION Repl. one-piece headset cord without boot for J&M HS-E164 Headset hardware kit Lower cord for J&M six-pin audio systems (BCD257, BCD277 and Shorty series) Windsock kit for AeroMike II®

SUG. RETAIL $50.95 14.95 24.95 9.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

SCALA RIDER G4 POWERSET COMMUNICATOR SYSTEM •Includes two factory-paired Scala Rider G4 headsets •Digital signal processing for advanced audio •Longer one-mile range •2-way communication with one-mile rider-to-rider or rider-to-passenger •4-way intercom between two bikers and two passengers or among three separate bikers (additional G4 communicators required) •Intercom conference mode with two other Scala Rider G4 users (one additional G4 communicator required) •Connects to multiple devices including mobile phone, Bluetooth stereo, FM radio with RDS, MP3 player and more •Built-in FM radio; can be connected by cable to external MP3 player (cable and MP3 player not included) •Priority management automatically disconnects from intercom or music to receive incoming phone calls or GPs instructions •Backwards compatible with entire line of Scala Rider headsets PART # DESCRIPTION •10 hours of talk time 4402-0102 Scala Rider G4 Powerset •Three hours charging time with seven-day standby

SUG. RETAIL $489.95

FRAMES, SUSPENSION SCALA RIDER® Q2™ MULTISET & FENDERS COMMUNICATOR SYSTEM •Includes two Scala Rider Q2 headsets FOOTRESTS •Bike-to-bike intercom communication up to 540 yards & LICENSE •Multiple device connection technology (MDC) that allows PLATE FRAMES bikers to connect to four different devices including Bluetooth-enabled mobile phone, GPS unit, another Scala Rider Q2 headset and Scala Rider headset (solo, FM and TIRES, Teamset) for communication up to 33 feet TUBES & •Includes an embedded FM radio with scan/seek features and six-station/channel memory WHEELS •Rider-to-passenger communications with passenger able to conduct mobile phone calls or listen to the FM radio independently duplex function that allows simultaneous talking and listening between bikers HARDWARE, •Full •Each headset includes an MP3 jack so riders and passengers can listen to music from their own MP3 player by simply plugging it into the unit CHEMICALS •Incoming intercom messages and mobile phone calls automatically override MP3 player & TOOLS •AGC Technology allows headset to automatically adjust its volume based on ambient noise •Noise-canceling microphone COVERS, •Features voice dial, redial and call reject functions PART # DESCRIPTION SUG. RETAIL SECURITY •Fits virtually all helmets with easy five-minute installation 4402-0060 Scala Rider Q2 Multiset $379.95 & GENERAL •Talk time up to 8 hours; standby time up to 10 days ®

1324

All part numbers in BOLD MAGENTA are new for 2011.


SECTION

21

WINDSHIELDS SCALA RIDER® TEAMSET PRO® COMMUNICATOR SYSTEM

TOURING

•Includes two pre-paired identical headsets •Each user can make/receive calls independently and listen to MP3 player or GPS unit •Rider-to-passenger intercom communication •MP3 connectivity (using the embedded jack and cable provided for stereo music) and extra-long 195mm boom mic •VOX Technology – receive, initiate and reject calls by voice control •Enhanced audio from dual ultra-slim speakers (less than 1/4” thickness) •Fully duplex; driver and passenger can talk and listen to each other simultaneously •Talk time up to 10 hours; standby time up to seven days •Utilizes intercom function without a mobile phone •AGC technology headset automatically adjusts its own volume based on ambient noise •Noise-canceling microphone •Fits virtually all helmets; easy 5-minute self-installation •Backward compatible with all Scala Rider models PART # 4402-0104

DESCRIPTION Scala Rider Teamset Pro

LUGGAGE SEATS & SISSY BARS EXHAUST

SUG. RETAIL $249.95

FUEL/AIR SYSTEMS

SCALA RIDER® G4 HEADSET •Bike-to-bike intercom communications with two other headsets up to a remarkable range of one mile with flip-up antenna for extended range •Link together for four-way intercom conference calling between two couples riding on two motorcycles •Multi-device compatibility; headset is compatible with Bluetooth enabled mobile phone, stereo Bluetooth-enabled or non-Bluetooth-enabled MP3 player, adapter or mobile phone, Bluetoothenabled GPS unit (GPS must support Headset connectivity), Scala Rider® Q2™ headset or another Scala Rider® Solo/FM/Teamset Driver headset •VOX Activation (VOX): Intercom calls, Answer, Voice Dial, Redial and Call Reject functions •Includes an embedded FM radio with scan and seek features and six-station/channel memory •Individual audio sources: each G4 headset can conduct mobile phone calls or listen to the FM radio or MP3 audio independently •Full Duplex – allows simultaneous talking and listening when using intercom connections •Talk time up to 10 hours, Standby time up to 10 days •AGC technology – headset automatically adjusts its own volume based on ambient noise and driving speed •Noise canceling microphone •Weather-resistant design •Fits virtually all 3/4 and full face helmets; PART # DESCRIPTION SUG. RETAIL easy five-minute self-installation 4402-0078 Scala Rider G4 $279.95 •Sold each

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

SCALA RIDER® Q2™ HEADSET •Bike-to-bike intercom communication up to 540 yards •Multiple-device connection technology (MDC) that allows bikers to connect to four different devices including Bluetooth-enabled mobile phone, GPS unit, another Scala Rider Q2 headset and Scala Rider headset (solo, FM and Teamset) for communication up to 33 feet •Includes an embedded FM radio with scan/seek features and six-station/channel memory •Rider-to-passenger communications with passenger able to conduct mobile phone calls or listen to the FM radio independently •Full duplex function that allows simultaneous talking and listening between bikers •AGC Technology allows headset to automatically adjust its volume based on ambient noise •Noise-canceling microphone •Features voice dial, redial and call reject functions •Fits virtually all helmets with easy five-minute installation •Talk time up to 8 hours; standby time up to 10 days PART # •Includes MP3 jack to connect MP3 player (not included) to headset •Sold each 4402-0072

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

DESCRIPTION Scala Rider Q2 headset

SUG. RETAIL $199.95

SCALA RIDER® MP3 AUDIO UPGRADE KITS •Adds the ability to connect nearly any MP3 player (not included) directly to the first generation Scala Rider® Q2 and Scala Rider® Teamset™ Bluetooth® headset communicators using the included cable •Audio unit attaches to helmet with clamp or glue (glue plate included) •Choice of boom mic or corded mic •Also a great accessory for riders that use their headset on multiple helmets PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION 4402-0061 Audio upgrade kit w/ boom mic $49.95 4402-0099 Audio upgrade kit w/ corded mic

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $49.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1325


SECTION

21

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS RIDERLINK ST-1 EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

•Full-duplex driver-to-passenger intercom •System includes driver and passenger headsets, each headset comes with full-face and open-face-style microphones •Speakers are music grade with excellent bass response •Music input with built-in amplifier (adapter cable included) •Mobile phone input with included adapter cable •Two-way radio input with two adapter cables and PTT switch; cable is compatible with Motorola, Cobra, Midland and many other two-way radio brands •Radar detector/GPS Audio input with included adapter cable •Built-in FM radio with seek and volume controls •Auto-mute circuit and microphone sensitivity control •All adapter and extension cables are included and removable when not in use •All mini DIN connections feature weatherproof moldings •Durable mounting straps with high-impact plastic buckles •Portable battery-powered unit (uses 2AA batteries) •Main unit measures 2.75” W x 4” H, approximately 1” thick PART # 4402-0031

DESCRIPTION Riderlink SK-1 communicator

SUG. RETAIL $189.95

SIDEKICK SK-1000 COMMUNICATOR •Complete communications system for all types of powersports use •GMRS hand-held 2-way radio can be used on or off the machine, has a range of up to 10 miles •Universal helmet headset includes full-face and open-face microphones •Modular 3-way adapter cable design and coiled extension cables provide flexible mounting options •All push-to-talk switches and connectors are weatherproof •Rechargeable battery pack and desktop charger included •All necessary installation accessories included •Sold each PART # 4402-0036

DESCRIPTION SideKick SK-1000 communicator

SUG. RETAIL $149.95

ELECTRICAL THUMPER 1 ENHANCED BASS HELMET SPEAKERS •Enhanced bass response speakers for your helmet •Install using hook-and-loop backing material •Weatherproof connectors •Coiled extension cable included •Speakers measure less than 1/2” thick and just PART # 11/2” diameter (2” diameter with speaker 4403-0043 covers installed)

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

DESCRIPTION Helmet speakers (pr.)

4403-0008

SUG. RETAIL $24.95

4403-0028

BRAKES TANKS & OIL FILTERS

4403-0007 4403-0006

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1326

EXT-6

MAGNUM F14 COMMUNICATOR HEADSETS ®

•Full-face microphone headsets have button microphone; open-face helmet headsets have boom microphone •All headset kits include helmet-mount dual speaker set and microphone, handlebar-mount push-to-talk (PTT) switch, interface cable and all necessary mounting hardware •Headsets install in helmets without permanent modifications required •Optional small PTT switch with 20” cord available separately •MXR-1 music mixer cable is a 2-way radio inline switch box •Allows the addition of a music player or other audio device (MP3 player, CD player, etc.) to a MotoComm MC- or SK-series headset PART # DESCRIPTION FULL-FACE HEADSETS MC-551 Compatible w/ Motorola Talkabout 200, 250, Distance (DPS) and most FRS, GMRS radios with separate speaker and microphone jacks MC-552 Compatible w/ Motorola Talkabout 280SLK, T289, fr50, fr60, T6300, T6310, T6320, Sprint GT and Sprint GT+ 4403-0006 Compatible w/ Garmin RINO 110, 120 and 130 series two-way radios OPEN-FACE HEADSETS MC-751 Compatible w/ Motorola Talkabout 200, 250, Distance (DPS) and most FRS, GMRS radios with separate speaker and microphone jacks

SUG. RETAIL

$59.95 59.95 59.95

PART # DESCRIPTION OPEN-FACE HEADSETS (CONT) MC-752 Compatible w/ Motorola Talkabout 280SLK, T289, fr50, fr60, T6300, T6310, T6320, Sprint GT and Sprint GT+ 4403-0007 Compatible w/ Garmin RINO 110, 120 and 130 series two-way radios ACCESSORIES 4403-0008 Small PTT switch w/ 20” cord EXT-6 Headset extension cable, 6-pin 4403-0028 Music mixer cable

59.95

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL

$59.95 59.95 19.95 14.95 29.95


SECTION

21

WINDSHIELDS TOURING LUGGAGE 4402-0052

SEATS & SISSY BARS 4403-0045

4402-0051 4403-0030

EXHAUST FUEL/AIR SYSTEMS

4403-0029

4403-0034 4403-0039

ENGINE

4403-0032

N-COM COMMUNICATION SYSTEM

•Nolan’s N-COM system allows the freedom to talk on a mobile phone, listen to music on an MP3 player, get directions from a GPS navigation system, connect to a bike-to-bike radio, connect to some bikes’ existing audio systems or talk to a passenger via intercom •N-COM is for use with Nolan N-COM-ready helmets (like the N42/E, N43/Trilogy, N90/S, N102/S and N103) and offers multiple configurations; Universal Basic Kit allows installation on most helmets (not just N-COM helmets)

N-COM MOBILE

N-COM COMPONENTS

•Utilizes the N-COM Basic Kit to connect to a mobile phone using a model-specific mobile wire accessory (not available from Drag Specialties) or to a multimedia source (MP3, CD, GPS, etc.) using a multimedia wire accessory (sold separately) •Requires Basic Kit only

•Basic Kit includes earphones, microphone and leads for connecting devices and charger; installs easily in minutes without tools or modification; Basic Kit 2 features stereo output •Intercom E-Box fits in the side of an N-COM helmet and includes a 110V charger, a rechargeable lithium battery and an intercom wire; allows rider to answer phone and control volume directly from their helmet •Bluetooth E-Box fits in the side of an N-COM helmet and includes a 110V charger and a rechargeable lithium battery; allows rider to answer phone, connect/disconnect with other N-COM BLUETOOTH helmet and control volume directly from their helmet; Bluetooth E-Box 2 provides stereo output when used with Basic Kit 2 •Bluetooth E-Box 2.11 features energy saving and functional improvements; the buttons’ red LEDs only blink when turning the system on/off and when the battery is in reserve mode to increase battery life and the surface of the keys has been raised, making them easier to press while wearing gloves

N-COM INTERCOM •Allows all the features of N-COM MOBILE but adds the ability to speak with a passenger (passenger must also have N-COM Basic Kit installed) •Can also be connected to some bikes’ existing audio systems using motorcycle audio wire accessory •Requires Basic Kit and Intercom E-Box

N-COM BLUETOOTH® •Allows all the features of N-COM MOBILE but adds the ability to connect to a Bluetooth mobile phone, GPS unit or another N-COM BLUETOOTH helmet within range •Can also be connected to some bikes’ existing audio systems using motorcycle audio wire accessory •Requires Basic Kit and Bluetooth E-Box

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

ACCESSORIES •Standard multimedia wire “S” connects any device with a 3.5mm, 4-pole audio port; “X” allows stereo sound •GPS multimedia wire “T” connects Garmin Quest and Quest 2 •GPS multimedia wire “U” connects TomTom Rider and Garmin 2610, 2720 and 2820 •GPS multimedia wires “P” and “V” connect Garmin 2820, Zumo 400, Zumo 450, Zumo 500 and Zumo 550; “P” supports stereo sound •Bike-to-bike multimedia wire “K” includes push-to-talk button and connects Alan 445 and BT and Midland GXT600, GXT600VP4, GXT650VP1, GXT650VP4, LXT420, LXT420VP3, LXT320, LXT320VP3, GXT500, GXT550VP1, GXT500VP4, GXT550VP4, LXT410, LXT410VP3, GXT400, GXT450VP1, GXT450VP4, LXT300, LXT300VP3, LXT315VP3, G300, GXT300, GXT300VP3, LXT310, LXT210, LXT210VP, G225, GXT250, GXT550, LXT310 and LXT350 •Bike-to-bike multimedia wire “W” includes push-to-talk button and connects Alan 777, K1 and 421 and Midland G5 •Motorcycle audio wire allows rider to plug into the bike’s existing audio system; helmet must be equipped with Basic Kit and either Intercom E-Box or Bluetooth E-Box •12V motorcycle charger allows rider to charge N-COM system without a power outlet; includes cigarette-lighter-style plug that can be hard-wired to a motorcycle battery and a cable to connect the N-COM system PART # DESCRIPTION N-COM COMPONENTS 4403-0045 Basic Kit 2 for N43/Trilogy, N90/S and N103 helmets (stereo) 4403-0029 Basic Kit for N102/S helmets 4403-0046 Basic Kit 2 for N102/S helmets (stereo) 4403-0030 Basic Kit for N42/E helmets 4403-0047 Basic Kit 2 for N42/E helmets (stereo) 4403-0078 Universal Basic Kit 2 (stereo) 4402-00521 Intercom E-Box 4402-0051 Bluetooth® E-Box 4402-00591 Bluetooth E-Box 2 (stereo) 4402-0106 Bluetooth E-Box 2.11 (stereo) OPTIONAL ACCESSORIES AND REPLACEMENT PARTS 4403-0032 Multimedia wire “S”, standard 4403-0068 Multimedia wire “X”, standard (stereo) 4403-0037 Multimedia wire “T”, GPS 4403-0038 Multimedia wire “U”, GPS

SUG. RETAIL

$104.95 79.95 104.95 79.95 104.95 99.95 149.95 199.95 249.95 249.95 25.95 25.95 25.95 25.95

PART # DESCRIPTION OPTIONAL ACCESSORIES AND REPLACEMENT PARTS (CONT) 4403-0039 Multimedia wire “V”, GPS 4403-0041 Multimedia wire “K”, bike-to-bike communication 4403-0042 Multimedia wire “W”, bike-to-bike communication 4403-0034 Motorcycle audio wire for 05-07 FLHTCU models 3807-0038 12V motorcycle charger 2113-0073 Repl. lithium battery 3807-0037 Repl. 110V charger 0935-0244 Repl. rubber seal for Basic Kit 4402-0053 Repl. board for Basic Kit 4402-0084 Repl. board for Basic Kit 2 (stereo) 4402-0085 Repl. microphone for N43/Trilogy, N90/S and N103 Basic Kit 2 (stereo) 4402-0054 Repl. microphone windscreens (pr.) 1

Multimedia wire included.

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $45.95 56.95 56.95 45.95 43.95 36.95 29.95 5.95 7.95 8.95 25.95 10.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1327


SECTION

21

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS MRC-11X

RADIO COMMUNICATOR

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS

•The MRC-11 allows you to speak to another rider up to 7 miles away – several times the range of other communicators •Bike-to-bike communication can either be push-to-talk or automatically voice activated •Special noise-canceling/wind-blocking headsets for maximum clarity and freedom with no shouting necessary, even in noisiest conditions •Simultaneous driver/passenger conversations •Twenty-two FRS/GMRS channels and 38 privacy codes •Large LCD with 16-function readout helps monitor the selected channels and codes, including battery condition and transmit/receive status •Auxiliary input allows you to listen to CDs or other external music sources •MHS-11XO premium open-face helmet-mount headset with push-to-talk switch included •Sold each

PART # 4402-0018

DESCRIPTION Radio communicator

SUG. RETAIL $128.95

PMC-2X

PMC-3X

DRIVER/PASSENGER INTERCOM

DRIVER/PASSENGER INTERCOM

•Includes one communicator and two headsets for communication from driver to passenger on one vehicle •Optional adapter cables let you communicate with other bikes by plugging any FRS/GMRS or PMR 2-way radio with VOX into the added jack •Full duplex – driver and passenger talk simultaneously as though on telephones •Electronic touch controls – no knobs •Noise-canceling unidirectional microphones for clear conversation, even at higher speeds •Small 4” x 2.75” x .65”, rugged, lightweight case weighs just 4.1 oz. and mounts on belt, or the clip can be removed and inserted in pocket •AUX IN jack for listening to CD players •No cumbersome handlebar or helmet mount – and no theft worries •Include two MO-type headsets for driver and passenger •Fit most helmets; no drilling or cutting required •Powered by three AAA batteries (included) or by vehicle battery with optional Battery Eliminator PART # DESCRIPTION SUG. RETAIL 4402-0016 Driver/passenger intercom $92.95

•All the features of the PMC-2X plus a powerful built-in FM receiver for on-the-road entertainment •Includes one communicator and two headsets for communication from driver to passenger on one vehicle •Optional adapter cables let you communicate with other bikes by plugging any FRS/GMRS or PMR 2-way radio with VOX into the added jack •Full duplex – driver and passenger talk simultaneously as though on telephones •Electronic touch controls – no knobs •Noise-canceling unidirectional microphones for clear conversation, even at higher speeds •Small 4” x 2.75” x .65”, rugged, lightweight case weighs just 4.1 oz. and mounts on belt, or the clip can be removed and inserted in pocket •AUX IN jack for listening to CD players •No cumbersome handlebar or helmet mount – and no theft worries •Include two MO-type headsets for driver and passenger •Fit most helmets; no drilling or cutting required •Powered by three AAA batteries (included) or by vehicle battery with optional Battery Eliminator PART # DESCRIPTION SUG. RETAIL 4402-0017 Driver/passenger intercom $118.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, MC HEADSET TUBES & BATTERY MO HEADSET FOR PMC-2X AND PMC-3X WHEELS ELIMINATOR FOR PMC-2X AND PMC-3X •Microphone mounts inside mouth FOR NADY COMMUNICATORS/INTERCOMS HARDWARE, •Forget about replacing expensive dry-cell batteries •Replacement headset for the PMC-2X guard of full-face helmets with or PMC-3X intercom hook-and-loop fastener CHEMICALS in Nady Communicators •Mounts inside any open- or full-face helmet •Foam-padded speaker fits in ear Eliminator taps directly into your & TOOLS •Battery with hook-and-loop fastener •No helmet modifications bike’s power source via lugs applied directly •Includes adjustable boom microphone required to mount to the battery COVERS, DESCRIPTION SUG. RETAIL DESCRIPTION SUG. RETAIL PART # DESCRIPTION SUG. RETAIL PART # SECURITY PART # Headset $21.95 Headset $24.95 MO For PMC-2/3 $34.95 MC & GENERAL 2812-01

1328

All part numbers in BOLD MAGENTA are new for 2011.


SECTION 4402-0020

21

WINDSHIELDS

4402-0019

TOURING

UNIVERSAL OPEN-FACE/ FULL-FACE HEADSET KITS 4403-0004

HELMETALK HEADSETS

4403-0005

4403-0003

•Work with most popular two-way FRS/GMRS radios •Come with both single- and double-prong connectors for easy hookup •Use hook-and-loop pads for easy installation and removal of microphones and earpad speakers •Replace your old push-to-talk (PTT) switch with Nady’s new waterproof PTT switch; sold separately PART # DESCRIPTION SUG. RETAIL 4403-0004 Headset w/ boom mic for use w/ open-face helmets $49.95 4403-0005 Headset w/ helmet-mount mic for use w/ full-face helmets 49.95 4403-0003 Waterproof push-to-talk (PTT) switch 12.95

•Complete helmet cable assembly kit for use with most radios and cell phones •Include connecting cables, premium open-face or full-face helmetPART # mount headsets, remote PTT4402-0019 11X push-to-talk switch and 4402-0020 PMC-XC/XY cable adapters

LUGGAGE DESCRIPTION Open-face kit Full-face kit

OPEN-FACE OR FULL-FACE HEADSETS

SUG. RETAIL $49.95 49.95

4402-0021

EXHAUST

FOR MRC-11X •Choice of premium open-face or full-face helmet-mount headset with microphone for driver or passenger DESCRIPTION PART # SUG. RETAIL Open-face headset 4402-0021 $39.95 Full-face headset 4402-0022 39.95 4402-0022

FUEL/AIR SYSTEMS

SUOMY COMMUNICATION SYSTEM (SCS) •Turns applicable Suomy helmets (like the D20) into an easy-to-use communication system without adding bulky external components •Uses cable or Bluetooth® connection to allow driverto-passenger or bike-to-bike communication as well as sync with an MP3 player, GPS system, cellular phone and some bikes’ existing radio systems; also features an integrated FM radio receiver with a onebutton interface •K1 Starter Kit includes headset (headphones and microphone), 4402-0080 microchip, allen wrench and full assembly instructions; mini USB on bottom of helmet allows connection of cell phones with mini USB connectivity •K2 Bluetooth Communication Kit includes Bluetooth communicator, rechargeable lithuim ion battery, battery charger, USB cable, DVD-rom and full assembly instructions (also requires installation of Starter Kit); allows Bluetooth connection to MP3 players, GPS systems and cellular phones and driver-to-passenger or bike-to-bike communication with other Bluetooth-enabled helmets •K3 Cable Kit includes USB spiral cable and cable holder (requires installation of Starter Kit); connects any device with a 3.5mm, 4-pole audio port •Bluetooth capability for just the rider requires one Starter Kit and one Bluetooth Kit, rider and passenger Bluetooth communication requires two Starter Kits and two Bluetooth Kits (K3 Cable kit not required) •SCS-ready helmets feature a convenient USB port for easy charging or connection of communication cable PART # 4402-0079 4402-0080 4403-0063

DESCRIPTION K1 Starter Kit (headset) K2 Bluetooth Communication Kit K3 Cable Kit

SUG. RETAIL $51.95 191.95 19.95

PART # 2113-0100 4402-0081 4402-0082

SEATS & SISSY BARS

DESCRIPTION Repl. battery and USB cable Repl. mic padding Repl. smart card

SUG. RETAIL $27.95 10.95 5.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

4402-0027

4402-0023

THROAT-MIC COMMUNICATORS

4402-0040

BRAKES 4402-0026

TANKS & OIL FILTERS

4402-0039

•No more yelling with the finest, full-duplex throat-mic intercom systems on the market •Designed specifically for noisy environments •Throat-mic picks up voice signals from vibrations in the neck, not the air, so background noise does not register

DASHES & GAUGES

FOX TALK RIDER/PASSENGER INTERCOM •Fox Talk system includes an intercom unit, two neck-rings with throat-mics and D-ring earpieces that can be placed in a helmet if desired •Intercom unit has 3.5mm receptor that may be used to plug in an MP3 player •Include a Fox Sox carrying case

ROUTE 66 RIDER/PASSENGER INTERCOM AND VANQUISH THROAT-MIC •The next generation of throat-mic transponders offer better quality sound, requiring only one mic •Neck rings are 50% larger with a soft rubber covering; include an extension to allow a perfect fit on almost any neck size •Ear bud speakers have a higher max volume than previous models and feature comfortable silicone tips •Both systems allow the rider to connect in any headphones, ear buds or helmet speakers with standard 3.5mm plug •Route 66 includes a full duplex intercom unit, two neck rings with throat-mics and two sets of ear bud speakers •Vanquish includes one neck ring with throat-mic, one set of ear bud speakers and coiled, waterproof PTT button (extends to 5’); simply plug the Vanquish into an intercom unit or any radio (Motorola, Cobra, Garmin, AudioVox, Uniden, etc.) that accepts a standard 3.5mm plug and be heard clearly •Both Route 66 and Vanquish come with a Fox Sox carrying case

ACCESSORIES •Cobra two-pin adapter allows the headset to be connected to older, two-pin radios by Cobra, Midland and more •Fox Sox neoprene carrying case will protect your throat-mic system from everyday damage PART # DESCRIPTION RIDER/PASSENGER SYSTEMS 4402-0023 Fox Talk 4402-0040 Route 66 intercom 4402-0039 Vanquish throat mic

SUG. RETAIL $89.95 164.95 97.95

PART # ACCESSORIES 4402-0027 4402-0026

DESCRIPTION Cobra two-pin adapter Fox Sox carrying case

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $9.95 9.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1329


SECTION

21

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

BT2-D WIRELESS BLUETOOTH MULTIMEDIA INTERCOM PAIR

BT1 BLUETOOTH INTERCOM SYSTEM

•Includes two wireless devices – use for rider and passenger communication or motorcycle to motorcycle •Features the Bluetooth version 2.0 stereo, A2DP protocol •Wireless connection with up to three other Bluetooth-enabled devices such as cell phones, GPS, MP3 players and other Midland Bluetooth headsets •Connect to non-Bluetooth device – MP3, or two-way radio •The Midland BT2 Rider and Passenger are identical devices and independent from each other with a range up to 220 yards •Multifunctional to enhance the riding experience •Midland BT2 Rider and Passenger connected to a cell phone with built-in MP3 player can “remote control” the features forward/replay and play/stop from the headsets •Includes hi-def stereo speakers for each set (hi-fi speakers optimized for listening to music also available, see the accessories section) •Waterproof •Shock resistant •Fitted with AGC function that automatically controls the volume in relation to background noise •Up to eight hours of usage •Noise cancelling microphones •Includes two types of mounting hardware for helmets (base with clamp and base with adhesive) •Two types of microphones included for each unit (boom mic and wired mic) •Includes AC dual charger, DC charger and stereo cable PART # DESCRIPTION SUG. RETAIL 4402-0089 BT2-D wireless Bluetooth dual intercom $399.95

•Wireless intercom system for rider and passenger •Includes one rider (main) device and one passenger device •The rider unit is compatible with other Bluetooth-enabled devices such as cell phones, GPS, MP3 players and two-way radios •Both units feature a cable connecting jack for connection to nonBluetooth devices such as MP3 players •Includes two types of mounting hardware for helmets (base with clamp and base with adhesive) •Set of two types of microphones included in every kit (boom mic and wired mic) •Includes AC dual charger, DC charger and stereo cable PART # 4402-0087

DESCRIPTION BT 1 Bluetooth dual intercom system

SUG. RETAIL $289.95

CABLES BRAKES BT2-S WIRELESS BLUETOOTH MULTIMEDIA HEADSET

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE BT REBEL PLATE FRAMES BLUETOOTH COMMUNICATOR wireless communicator can be installed in most helmets TIRES, •Hands-free •Compatible with a Bluetooth-enabled device such as a GPS or a TUBES & cell phone WHEELS •Features a cable connecting jack for connection to non-Bluetooth devices such as MP3 players HARDWARE, •Unit will not connect to Midland Bluetooth Intercom devices CHEMICALS •Two types of mounting hardware for helmets (base with clamp and base with adhesive) & TOOLS •Two types of microphones included (boom mic and wired mic) COVERS, •Includes AC charger, DC charger and stereo cable DESCRIPTION SUG. RETAIL SECURITY PART # BT Rebel Bluetooth communicator $179.95 & GENERAL 4402-0086

1330

•All the great features of the BT2-D intercom system, but available as a single headset •Features the Bluetooth version 2.0 stereo, A2DP protocol •Complete wireless multimedia system for a solo rider •Wireless connection with up to three other Bluetooth enabled devices such as cell phones, GPS, MP3 players, or other Midland Bluetooth headsets •Multifunctional to enhance the riding experience •Includes hi-def stereo speakers (hi-fi speakers optimized for listening to music also available, see the accessories section) •Waterproof •Shock-resistant •Fitted with AGC function that automatically controls the volume in relation to background noise •When connected to a cell phone with a built-in MP3 player, playback functions can be “remote controlled” with the headset (forward/replay and play/stop) •Up to eight hours of usage •Noise cancelling microphones •Rider and passenger or intercom motorcycle to motorcycle up to 220 yards •Includes two types of mounting hardware for helmets (base with clamp and base with adhesive) •Two types of microphones included (boom mic and wired mic) •Includes AC dual charger, DC charger and stereo cable PART # 4402-0088

DESCRIPTION BT2-S wireless Bluetooth intercom

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $199.95


SECTION

21

WINDSHIELDS 4402-0091

TOURING 4402-0090

4402-0093

LUGGAGE 4402-0092

SEATS & SISSY BARS

OPTIONAL/REPLACEMENT ACCESSORIES FOR MIDLAND BLUETOOTH INTERCOMS PART # 4402-0090 4402-0091 4402-0092 4402-0093 4402-0094 4402-0095

DESCRIPTION Headset kit Hi-fi speakers Mounting kit DC charger Stereo cable GMRS radio cable

SUG. RETAIL $29.95 39.95 24.95 24.95 9.95 39.95

EXHAUST FUEL/AIR SYSTEMS

4402-0094 4402-0095

AGVOICE BLUETOOTH® KIT

ENGINE

•For use with the Stealth SV and S-4 SV helmets •Receive/make calls with the Bluetooth® technology or speak with passenger via intercom mode •Connect to GPS/navigation system •Can be installed at any time •No need to make any hole in the outer shell and to connect any cable •Remove the cheek pads, insert the communication system placing the microphone, earphones, battery and card in their sites and reinsert the cheek pads; it’s that simple •Features an easy-to-use single external button that controls all functions •See pages 48-49 of the 2011 Parts Unlimited Helmet & Apparel catalog for the Stealth SV and S-4 SV helmets PART # 4402-0100 4402-0101

SIZE XXS-M L-XXL

TRANSMISSION & DRIVELINE GASKETS & SEALS

SUG. RETAIL $239.95 239.95

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES 4401-0022

4401-0045

4401-0086

BRAKES

4401-0020 4401-0023

TANKS & OIL FILTERS

4402-0103

DASHES & GAUGES

4401-0060

PROVAULT™ iPod® PROTECTORS •6061 billet aluminum iPod® protector by Pro Armor •Offers bulletproof protection and a great look •Unique slide and lock system requires no tools (patent pending) •Handlebar and hard mounting systems and protective film available separately •Hard mounting system adds extra security over universal mounting system by adding pin and clip assembly •Protective film is perfectly cut to fit inside Pro Armor Pro Vault and over iPod® to help protect it from the harmful elements •Made in the U.S.A. PART # DESCRIPTION iPod PROTECTORS 4401-0020 30GB iPod® video and 80/120GB Classic® 4401-0045 iPod Nano® generation 3 4401-0069 iPod Nano® generation 4 4401-0086 iPod Nano® generation 5 4401-0022 60GB/80GB iPod® video and 160GB Classic® 4401-0060 iPod® PV Touch® 4402-0103 iPhone®

SUG. RETAIL $69.95 59.95 59.95 69.95 69.95 74.95 79.95

PART # DESCRIPTION MOUNTS 4401-0023 Handlebar mount (all) 4401-0029 Hard mount PROTECTIVE FILM 4401-0030 iPod® 4401-00311 iPod Nano® 1

Only for PART #4401-0021 and 4401-0028.

All part numbers in BOLD MAGENTA are new for 2011.

4401-0029 SUG. RETAIL $49.95 19.95 1.95 1.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1331


SECTION

21

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

RIDERCAM 30F •Hands-free powersports video camera •Rugged, waterproof design that weighs less than 3 oz. •Wide-angle camera lens captures all the action •Quick-release mounting system for easy attachment to a helmet or vehicle •Records at 30 frames/second •Selectable resolution of VGA (640x480) or QVGA (320x240) •Built-in microphone •Rechargeable Li-ion battery and charger included •Camera has 2+ hours of battery life per charge; can record up to 4+ hours of VGA video on standard MicroSDHC card (card not included) •Video files are saved in AVI file format •PC and Mac compatible, can also playback directly to a TV •Complete kit includes camera, USB cable, AV cable, AC battery charger, PART # helmet camera mount, handlebar camera mount, short and long straps 4402-0098 for use with helmet mount, and protective carrying case

DESCRIPTION Ridercam 30F

SUG. RETAIL $189.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS DSR-1003G DIGITAL & MIRRORS RECORDER AND CAMERA SYSTEM

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1332

•Complete system lets you record your ride •Now features 3GP technology – saves videos in 3GP format •Improved video color and detail •Built-in MP3 player allows you to listen to music, now includes Thumper helmet speakers •Can be used as an active rearview camera system •Weatherproof, bullet-style camera has a rugged aluminum housing and weatherproof connectors •Digital recorder/playback unit has full-color display, records video and audio from camera and remote-mount microphone •Records using standard compression and file formats •Saves videos in 320x240 resolution at 30 frames/second •1 GB built-in memory •Accepts SD cards up to 4GB in size (4 GB SD card equals approximately 4-6 hours of video/audio recording) (SD card sold separately) •Color LCD and built-in speaker for on-the-go playback or rearview use •Helmet speakers included •Uses USB connection for transfer of video/audio files to a computer •Analog RCA video/audio output allows you to play videos direct to TV •Includes multiple camera mounts, all necessary hardware and adapters for battery-powered operation and 12V DC power cable for operation off of the vehicle battery •All cables and accessories included in convenient carrying case •Replacement bike camera mount and helmet camera mounts available separately •DSR DC5 power adapter cable powers and charges the DSR-100 recorder from the vehicle’s battery or any other 12V DC power supply •Regulates and filters the DC voltage •Power cable measures approximately 6’ PART # 4402-0057 4402-0037 4402-0038 4402-0056

DESCRIPTION DSR-100 3G camera/recorder kit Bike camera mount Helmet/universal camera mount DSR DC5 power adapter cable

SUG. RETAIL $285.95 9.95 9.95 29.95

4402-0057

4402-0038

4402-0037

4402-0056

All part numbers in BOLD MAGENTA are new for 2011.

4402-0038


SECTION

21

WINDSHIELDS TOURING LUGGAGE

4402-0121

SEATS & SISSY BARS

4402-0120

EXHAUST 4402-0108

4402-0126

FUEL/AIR SYSTEMS

4402-0124

MOUNT KITS •Mount kits are compatible with GPS, XM/MP3, cell phones, toll transponders, cameras and radar detectors •Handlebar mount kits fit all standard round-tube handlebar sizes (7/8”, 1”, 11/8” and 11/4”), requiring only 3/4” of handlebar space and can be mounted at any angle; available in basic or standard kits •Wider clamp design (19mm) uses supplied hardware to provide 50% more clamping force without damaging or distorting the handlebars and provides a sturdy platform for even the heaviest devices •Standard handlebar mount kits feature inter-locking pivot design that requires no shaft and stays put even on tough terrain •Universal stem-mount kits fit 13mm, 16mm, 17mm, 18mm, 19mm and 24mm openings in the top of the steering stem; uses O-ring shaft that gets tight as it is installed •Features removable inter-locking pivots measuring 3” H or 1” from stem nut; top measures 2.25” in diameter with two mounting holes to allow offset and center mounting options and has four-hole AMP •Mounting Garmin ZUMO 660 requires PART #s 4402-0130, 4402-0131 or 4402-0132 ZUMO Top Plate •Universal control mount kits are designed to attach to the clutch or front brake control assembly on top of the OEM clamp; kit includes both metric and standard replacement mounting bolts to install on most motorcycles, even hard-to-fit models •Inter-locking pivot design requires no shaft and stays put even on tough terrain •Features a standard round top plate for a more compact look; compatible with GPS, XM/MP3, cell phone, camera, radar detector units and more •Plate area measures 21/4” diameter •Pre-drilled standard four-hole “AMPS” pattern and a camera thumbscrew hole •Side grip/pin design allows 360° rotation without removing any part of the mount; much easier to make small adjustments •Available in black or chrome finish •Made from 6061 T-6 aluminum with stainless steel hardware •Made in the U.S.A. NOTE: The maximum weight of the mounted device should not exceed 2 lb. HANDLEBAR MOUNT KITS PART # DESCRIPTION BASIC 4402-0119 Black 4402-0120 Chrome PART # DESCRIPTION STEM-MOUNT KITS 4402-0108 Black 4402-0109 Chrome

SUG. RETAIL $39.95 59.95

SUG. RETAIL $69.95 84.95

PART # STANDARD 4402-0121 4402-0122

PART # DESCRIPTION CONTROL MOUNT KITS 4402-0124 Black 4402-0125 Chrome

DESCRIPTION

SUG. RETAIL

Black Chrome

SUG. RETAIL $69.95 89.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

$69.95 89.95

PART # DESCRIPTION MIRROR MOUNTS 4402-0126 Black 4402-0127 Chrome

SUG. RETAIL $59.95 79.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

ACCESSORY CRADLES •Adjustable black cradles for mounting small or large devices like a cell phone, iPod®, iPhone®, GPS unit, etc. •Mount directly to any accessory mount kit •PART #s 4402-0164 and 4402-0165 include 4-pin adapter and safety strap and also works with Quick-Change Adapter, PART #4402-0128; sold separately •PART #4402-0164 measures 15/8” to 21/4” W •PART #4402-0165 measures 2.4” to 3.6” W and up to 4.1” T •PART #4402-0166 includes 4-pin adapter and safety strap and also works with Quick-Change Adapter, PART #4402-0128; sold separately •PART #4402-0167 includes a TM032 Dual T adapter (PART #4402-0175) and attaches directly to any standard TechMount top plate or Quick-Change adapter, PART #4402-0128; all sold separately •All BlackBerry cradles include a TM032 Dual T adapter, PART #4402-0175; replacement adapters available separately •Made in the U.S.A. PART # 4402-0164 4402-0165 4402-0166 4402-0167

DESCRIPTION For small cell phones or iPod nano®, mini or standard For large cell phones or iPod® (video units) For any flat back GPS (TomTom, Garmin, Lorance, etc.) For iPhone, 3G iPhone®, Motorola Droid

SUG. RETAIL $24.95 24.95

PART # 4402-0168 4402-0169 4402-0170 4402-0171

DESCRIPTION For BlackBerry For BlackBerry For BlackBerry For BlackBerry

24.95 14.95

All part numbers in BOLD MAGENTA are new for 2011.

“Custom” “Pearl” “Bold” “Storm”

4402-0164

SUG. RETAIL $14.95 14.95 14.95 14.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1333


SECTION

21

WINDSHIELDS 4402-0163

TOURING LUGGAGE 4402-0128

4402-0149

SEATS & SISSY BARS TECHMOUNT ACCESSORY PARTS EXHAUST FUEL/AIR SYSTEMS ENGINE

4402-0162

•Constructed of 6061 T-6 aluminum, except PART #4402-0175 which is machined from solid ABS •Those listed as black are then anodized black for a weather resistant finish •Stainless steel hardware •Made in the U.S.A. PART # 4402-0128 4402-0129 4402-0148 4402-0149 4402-0162

DESCRIPTION SUG. RETAIL Quick-change adapter (for round top plate only) $14.95 Thumb screw w/ lock washer 2.95 3” pivot-style accessory extension shaft; black 9.95 3” pivot-style accessory extension shaft; chrome 14.95 Magnetic mounting bracket for Satellite radio antennas; black 14.95

TRANSMISSION & DRIVELINE

PART # 4402-0163 4402-0172 4402-0173 4402-0174 4402-0175 4402-0181

DESCRIPTION SUG. RETAIL Magnetic mounting bracket for Garmin Satellite radio antennas; black $19.95 AMPs to 4 square hole adapter 4.95 4 square pin to 1 pin adapter 4.95 4 square pin to AMPs adapter 4.95 AMPs to dual T pin adapter 4.95 DynoJet LCD adapter pin 4.95

4402-0140

GASKETS & SEALS 4402-0138

4402-0130

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

TOP PLATES

4402-0134

•Constructed of 6061 T-6 aluminum •Replace standard top plate •Work with TechMount kits •Made in the U.S.A.

4402-0144

PART # DESCRIPTION SUG. RETAIL GARMIN ZUMO 660 TOP; CUSTOM 4402-0130 Black $9.95 4402-0131 Silver 9.95 4402-0132 Chrome 15.95 ROUND TOP PLATE; 2.25” (W/ AMPS PATTERN) 4402-0133 Black 9.95 4402-0134 Silver 9.95 4402-0135 Chrome 15.95

PART # DESCRIPTION SUG. RETAIL MULTI-USE W/ BUSHING; 2.25” X 3” 4402-0136 Black $14.95 4402-0137 Silver 14.95 4402-0138 Chrome 19.95 MULTI-USE W/O BUSHING; 2.25” X 3” 4402-0139 Black 14.95 4402-0140 Silver 14.95 4402-0141 Chrome 19.95

4402-0145 PART # DESCRIPTION SUG. RETAIL WIDE TOP; 2.5” X 5” 4402-01421 Black $14.95 4402-01431 Silver 14.95 4402-01441 Chrome 19.95 DOUBLE TOP KIT; 2.25” X 3” (TWO INCLUDED) 4402-0145 Black 34.95 4402-0146 Silver 34.95 4402-0147 Chrome 44.95 1

Will not fit double mounts.

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS 4402-0179 FOOTRESTS & LICENSE PLATE FRAMES WATER-RESISTANT ACCESSORY CASES •Constructed of molded Neoprene TIRES, •Watertight wire port is integrated into the bottom of each case to allow power and data cords to be routed to the motorcycle TUBES & zipper for easy access to unit WHEELS •Watertight •Quick-detach dual T adapter on the back for easy case removal when case is not needed HARDWARE, •Touch screen front panel allows all touch features to work while inside the case cases include padded inserts to allow for thickness variations of the devices CHEMICALS •Both •PART #4402-0179 can mount almost all flat-mount GPS units to any TechMount easily and securely & TOOLS •PART #4402-0179 inside dimensions are 3.4” H x 5.3” W x 1.7” D; outside dimensions are 4.2” H x 5.8” W x 2” D •PART #4402-0180 can mount almost all “Smart Phone” units to any PART # DESCRIPTION COVERS, TechMount easily and securely 4402-0179 GPS case SECURITY •PART #4402-0180 inside dimensions are 4.7” H x 3” W x 1” D; 4402-0180 Smart Phone case & GENERAL outside dimensions are 5.4” H x 3.7” W x 1.4” D

1334

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $24.95 24.95


SECTION

21

WINDSHIELDS 0615-0144

TOURING

0615-0142

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

eCADDY DELUXE iPod classic®, iPod nano®, iPod touch® AND 3G iPhone® MOUNTING KITS •All Leader hardware is machined aluminum and chrome-plated •Mounting an iPod® or iPhone® on a bike is easier than you think; eCaddy Deluxe kit includes everything you need including the following •eCaddy Deluxe all-chrome plate with multi-faceted lug that offers six different mounting angles •UltraTilt that allows owner to angle the GPS unit in any direction they choose for better visibility or to reduce sun glare •iPod®/iPhone® cradle is custom-shaped to grip your unit securely •Fit left side or right side of most 1” or 11/4” bars, or a mount for all 96-10 Harley-Davidson handlebar controls with 11/2” screw spacing •All necessary hardware and complete instructions also included •Made in the U.S.A.

GASKETS & SEALS ELECTRICAL

NOTE: You may also use the eCaddy Lite with the Caddy Buddy to mount iPod®/MP3/PDA. PART # iPod classic® 0603-0281 0603-0282 0615-0142 iPod nano® 0603-0283 0603-0284 0615-0144

DESCRIPTION

SUG. RETAIL

For 1” bars For 11/4” bars For H-D controls

$124.95 129.95 114.95

For 1” bars For 11/4” bars For H-D controls

124.95 129.95 114.95

PART # iPod touch® 0603-0285 0603-0286 0615-0146 3G iPhone® 0603-0294 0603-0295 0615-0148

DESCRIPTION

SUG. RETAIL

For 1” bars For 11/4” bars For H-D controls

$124.95 129.95 114.95

For 1” bars For 11/4” bars For H-D controls

124.95 129.95 114.95

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

0615-0110

TANKS & OIL FILTERS

0603-0261

DASHES & GAUGES

0603-0234

deluxeCAM CAMERA MOUNTS •All Leader hardware is machined aluminum and chrome-plated •Leader hardware features a patented slot-and-lug design that makes all parts interchangeable (including RoadRunner drink holder) •deluxeCAM features eCaddy Deluxe’s extraordinary durability paired with a PanaVise adjustable, flexible swivel camera mount •Mounts a camera just about anywhere, controls every angle and helps to ensure camera will never fall off •Chrome mounting hardware looks like it belongs on the motorcycle; fit left side or right side of most 1” or 11/4” bars, or universal design for flat surface applications and a mount for all 96-10 Harley-Davidson handlebar controls with 11/2” screw spacing •Made in the U.S.A. PART # 0603-0234 0603-0235

LIGHTING

DESCRIPTION For 1” bars For 1” 1/4” bars

SUG. RETAIL $129.95 134.95

PART # 0615-0110 0603-0261

DESCRIPTION For H-D controls For flat surfaces, universal

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $119.95 99.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1335


SECTION

21 eCADDY LITE PHONE/

0603-0129

WINDSHIELDS MP3 MOUNT TOURING LUGGAGE SEATS & SISSY BARS EXHAUST

•All Leader hardware is machined aluminum and chrome-plated •Leader hardware features a patented slot-and-lug design that makes all parts interchangeable •Can be used with most items with standard belt clips, including cell phones, PDAs, MP3 players, smaller GPS and satellite radio (if they have a case/holster with a belt clip) •Plate area measures 13/8” x 27/8” x 5/16” •Multi-faceted lug offers secure mounting at six different angles •Fit left side or right side of most 1” or 11/4” bars, or universal design for flat surface applications and a mount for all 96-10 Harley-Davidson handlebar controls with 11/2” screw spacing •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 0603-0129 For 1” bars $69.95 69.95 0603-0130 For 11/4” bars

2350-0026 0615-0078

PART # 0615-0078 2350-0026

DESCRIPTION For H-D controls For flat surfaces, universal

SUG. RETAIL $64.95 49.95

0615-0079 2350-0027

FUEL/AIR SYSTEMS 0603-0133

ENGINE eCADDY DELUXE GPS/

TRANSMISSION SATELLITE RADIO MOUNT & DRIVELINE •All Leader hardware is machined aluminum and chrome-plated GASKETS & SEALS ELECTRICAL LIGHTING

•Leader hardware features a patented slot-and-lug design that makes all parts interchangeable •Works with the standard four-hole “AMPS” pattern (11/2” x 11/4”) •Works with the diamond-shaped “RAM” pattern (some units require a cradle between GPS/radio and eCaddy) •Multi-faceted lugs offer secure mounting at six different angles •Plate area measures 113/16” x 11/2” x 5/16” •Holders fit left side or right side of most 1” or 11/4” bars, or universal design for flat surface applications and a mount for all 96-10 Harley-Davidson handlebar controls with 11/2” screw spacing •Made in the U.S.A.

PART # 0603-0132 0603-0133

DESCRIPTION For 1” bars For 11/4” bars

SUG. RETAIL $69.95 69.95

PART # 0615-0079 2350-0027

ROADRUNNER

HANDLEBARS, DRINK HOLDER Leader hardware CONTROLS •All is machined aluminum and chrome-plated & MIRRORS •Leader hardware features a patented slot-and-lug CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1336

DESCRIPTION For H-D controls For flat surfaces, universal

2350-0025 0615-0077

design that makes all parts interchangeable •Ring features faceted lug to allow six different angles •”Cup” kits include 16 oz. stainless steel, insulated travel mug with spring-loaded “no spill” screw-on lid •”Insert” kits include canvas “Ultra-Snap” insert with special gripping bands for cans, water bottles, coffee cups, etc. •Fit left side or right side of most 1” or 11/4” bars, or universal design for flat surface applications and a mount for all 96-10 Harley-Davidson handlebar controls with 11/2” screw spacing •Made in the U.S.A. PART # CUP KITS DS-111182 0603-0094 0615-0077 2350-0025

DESCRIPTION For For For For

1” bars 11/4” bars H-D controls flat surfaces, universal

SUG. RETAIL $64.95 49.95

0603-0270

SUG. RETAIL $84.95 84.95 79.95 69.95

PART # INSERT KITS 0603-0270 0603-0271 0615-0124 2350-0120 0603-0272

DESCRIPTION For 1” bars For 11/4” bars For H-D controls For flat surfaces, universal Ultra Snap insert only

SUG. RETAIL $78.95 84.95 79.95 69.95 18.95

DS-111126

“THE BUTLER” DRINK HOLDER •High-tech cup holder holds mug securely while allowing easy removal •Driver cup holder mounts to left clutch lever mount •Infinitely adjustable to any mounting position •Available in 20 oz. or 34 oz. sizes •Universal design allows it to fit most motorcycles •Insulated Aladdin mug includes drinking straw •All necessary mounting hardware included •Made in the U.S.A. PART # DS-111126 DS-111128 DS-111129 DS-111130

DESCRIPTION Driver’s drink holder w/ 34 oz. mug Driver’s drink holder w/ 20 oz. mug Passenger’s drink holder w/ 34 oz. mug Passenger’s drink holder w/ 20 oz. mug

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $57.95 57.95 57.95 57.95


SECTION Front 0603-0231 Back

21

WINDSHIELDS 0603-0233

TOURING 0603-0228

LUGGAGE

0603-0230

OPTIONAL/SPARE/ REPLACEMENT PARTS FOR LEADER ACCESSORIES •All Leader hardware is machined aluminum and chrome-plated •Leader hardware features a patented slot-and-lug design that makes all parts interchangeable (including RoadRunner drink holder) •For a few extra dollars, riders can mount extra brackets/hardware on almost any flat surface and move electronics or drink holders from place to place •Made in the U.S.A. PART # 0603-0228 0603-0229 0615-0108 0615-0109 0603-0230 0603-0231 0603-0233 0603-0232 0603-0236

DESCRIPTION Mounting bracket for 1” bars Mounting bracket for 11/4” bars Mounting bracket (reversible) for H-D controls, includes screws and spacers) Mounting bracket flat surfaces, universal eCaddy Lite plate (iPod, cell phone, PDA) eCaddy Deluxe plate (GPS, Satellite radio) Roadrunner chrome ring Roadrunner cup Camera mount

SUG. RETAIL $44.95 44.95 39.95 29.95 27.95 27.95 33.95 18.95 74.95

Contents not included

EXHAUST

COSMOS CADDY BUDDY •Keeps electronics at fingertips and protected from the elements; constructed of leather-touch vinyl •For use with the eCaddy Lite mounts; measures 4.25” wide and 5.5” high •Clear cover on the front allows easy viewing of electronics •Back contains a rigid plastic clip that securely locks on to the eCaddy Lite •Quick, secure and easy to install; rider can go from belt to handlebars in seconds •Holds MP3 players, GPS, toll passes, cell phones, wallet, cigarettes, keys, or just about anything •Customer should check the dimensions of the item to make sure the Cosmos Caddy Buddy is large enough •Made in the U.S.A. PART # 3550-0071

SEATS & SISSY BARS

DESCRIPTION Cosmos Caddy Pouch

SUG. RETAIL $16.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

0603-0289

0603-0288

CABLES BRAKES

PASSENGER DRINK HOLDERS

CLIP-IT!™ •Designed to hold cell phone, MP3, electronic toll device, just about anything that you can clip to your belt •Patented mounting system allows the Clip-It! to be mounted onto any 1/4” bolt or screw, or simply mount it to your 7/8” or 1” handlebars with the included handlebar mount kit PART # DESCRIPTION SUG. RETAIL 0603-0139 Clip-It! $39.95

•Fasten securely to the passenger grab rails on Touring models •Two styles are available: a mounting ring with stainless mug or a basket that will hold just about any can, bottle or cup •The clamp fastens securely to the 1/2” diameter passenger grab rails found on FLHT and FLHR models or can be mounted universally on any 1/2”, 5/8” or 3/4” tubing PART # 0603-0288 0603-0289

0603-0258

DESCRIPTION Passenger drink holder w/ basket Passenger drink holder w/ stainless steel mug

0603-0258

SUG. RETAIL $59.95 59.95

0603-0241

UNIVERSAL HANDLEBAR ACCESSORY MOUNTS •Attach your cell phone, MP3 player or other portable device directly to the handlebar •Quick-detach chrome mount leaves only the clip in place when not in use •Mount accepts belt clips, screw mounts (standard 4-hole AMPS) and hook-and-loop straps PART # DESCRIPTION 0603-0258 For 1” dia. handlebars 0603-0259 For 11/4” dia. handlebars

SUG. RETAIL $49.95 49.95

PART # 0603-0241

DESCRIPTION For 82-08 clutch/brake clamp mounts

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $59.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1337


SECTION

21

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

SNAP BACK™ VISTREK™ SOLAR SERIES CLOCKS

2212-0324 2212-0323

•Go Green with solar power •Battery never needs replacing; uses any light source to charge •New Snap Back™-capable case design with larger dial face for easier reading 2212-0325 •5 ATM rated water resistant •Black chrome 316L stainless steel case and back •Shockproof Citizen™ solar movement •Swiss Super LumiNova™ on both white and black face clocks •Watch can run for about 5 months on full charge without the solar-cell dial being exposed to the light and/or sun •Mounts using any Snap Back Mounting Option (sold separately, see below); come with standard stick-on mount PART # 2212-0325 2212-0326

DESCRIPTION Black chrome stainless steel case w/ white face Black chrome stainless steel case w/ black face

2212-0326

SUG. RETAIL $119.95 119.95

SNAP BACK™ CLASSIC SERIES CLOCKS AND THERMOMETERS •New Snap Back™ capable case design with larger, 2212-0322 2212-0317 2212-0321 easier-to-read face design •Clock features include 3 ATM rating, water- and shock-proof design, Citizen Super 2035 movement, easily replaceable battery with up to four-year life span, and anodized alloy case •Thermometer features include markings shown in both Fahrenheit and Celsius, German bi-metal coil and anodized alloy case; all are non-oil filled •Mount using any Snap Back Mounting Option (sold separately, see below); come with standard stick-on mount PART # CLOCKS 2212-0321 2212-0322 THERMOMETERS 2212-0317 2212-0318

DESCRIPTION

SUG. RETAIL

Silver anodized alloy case w/ white face Black anodized alloy case w/ black face

$39.95 39.95

Silver anodized alloy case w/ white face Black anodized alloy case w/ black face

39.95 39.95

2212-0319

2212-0320

SNAP BACK™ SIGNATURE SERIES CLOCKS AND THERMOMETERS •New Snap Back™-capable case design with larger, easier-to-read face design •Clock features include notched gear-style outer bezel with seconds markings, 5 ATM rating, water- and shock-proof design, Citizen Super 2035 movement, easily replaceable battery with up to four-year life span, and 316L stainless steel case and back •Thermometer features include markings shown in both Fahrenheit and Celsius, freeze warning zone markings and German bi-metal coil, and 316L stainless case and back •Mount using any Snap Back Mounting Option (sold separately, see below); come with standard stick-on mount SUG. PART # DESCRIPTION RETAIL CLOCKS 2212-0323 Polished stainless steel case w/ white face $54.95 2212-0324 Black chrome stainless steel case w/ black face and Super LumiNova treatments 69.95 THERMOMETERS 2212-0319 Polished stainless steel case w/ white face 54.95 2212-0320 Black chrome stainless steel case w/ black face and Super LumiNova treatments 69.95

2212-0335

2212-0334

CABLES 2212-0332

BRAKES 2212-0330 2212-0333 TANKS & OIL FILTERS SNAP BACK™ MOUNTING OPTIONS

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1338

2212-0331

•Mounting options for Formotion Snap Back Series clocks and thermometers :

BOLT-ON KIT •Chrome bolt-on mount allows any Snap Back gauge to be mounted to any 1/4” screw or bolt on the motorcycle •Features a 316L stainless steel back cover with Formotion’s patented Stem-and-Barrel™ design (stem is also threaded, allowing even more mounting options for the user) •Includes stainless steel beauty ring for optional decorative use, mounting bar, hex key and screws as well as a case-back screwdriver kit with additional case-back screws for easy removal of existing Formotion gauge’s back cover •Optional twin-mount kit available (must be used with bolt-on kit)

TWIN-MOUNT KIT •Mount more than one Bolt-On mount gauge in one location •Great for saving space and flexibility •Must be used with Bolt-On Kit (sold separately) PART # BOLT-ON KIT 2212-0330 TWIN-MOUNT KIT 2212-03331 ROUND WATCH KIT 2212-0335

DESCRIPTION

SUG. RETAIL

Chrome

$17.95

Chrome

12.95

Chrome

57.95

ROUND WATCH KIT •Turns any Snap Back gauge into a wrist watch to be worn by the user •Includes stainless steel watch back, high-quality black nylon NATO watch strap and case-back screwdriver kit with additional case-back screws for easy removal of existing Formotion gauge’s back cover •Available in black or polished stainless steel

SQUARE MOTOR SPORT KIT •Use this kit to flat-mount any Snap Back gauge using the included 3M VHB waterproof and heat-resistant sticky disk •Can also remove the four corner faux screws and use your own screws to mechanically mount the mount and its gauge to any flat surface •Includes case-back screwdriver kit and additional case-back screws for easy removal of your existing Formotion gauge’s back cover •Flight deck square design is available in black or polished 316L stainless steel PART # ROUND WATCH KIT (CONT) 2212-0334 SQUARE MOTOR SPORT KIT 2212-0331 2212-0332 1

DESCRIPTION Black Chrome Black

Must be used with bolt-on kit.

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $49.95 32.95 24.95


SECTION

21

WINDSHIELDS REFERENCE SL CLOCKS

2212-0328 •Easy-to-read clocks with Super 2035 Citizen movement and four-year battery life •Rugged 45mm dia. case and 40mm dia. face with Super-LumiNova glowing hands and large markers •Gun metal stainless steel case with choice of bolt-on or stick-on mounting •Include all hardware necessary to mount on any 1/4” bolt on the bike, or can be mounted to any 7/8”-11/4” dia. handlebar using optional handlebar mount (sold separately) PART # 2212-0328 2212-0329

DESCRIPTION W/ gunmetal steel case, black face and bolt-on mounting W/ gunmetal steel case, black face and stick-on mounting

SUG. RETAIL $69.95

TOURING 0603-0135

PART # DESCRIPTION SUG. RETAIL OPTIONAL HANDLEBAR MOUNTING BRACKETS (FOR BOLT-ON STYLE) 0603-0135 For 7/8”-1” bars, chrome $19.95 0603-0170 For 11/4” bars, chrome 19.95

51.95

LUGGAGE SEATS & SISSY BARS

NIGHT ADVANTAGE CLOCKS AND THERMOMETER •Clocks feature high-quality Citizen® internal clock movements, and come with a long-lasting button-cell battery •Clocks also feature an electro-luminescent backlight dial that draws almost no power and produces a non-glaring light at the push of a button •Thermometer is oil-encapsulated to fully resist vibration, and has a range of -20°F/-28.89°C to 120°F/48.89°C with an accuracy to within +/- 3-5° •Shock-resistant and no outside wiring necessary •Water-resistant to 3 atm •Include all hardware necessary to mount on any 1/4” bolt on the bike, or can be mounted to any 7/8”-11/4” dia. handlebar using optional handlebar mount (sold separately) PART # CLOCKS 2212-0057 2212-0121

DESCRIPTION

SUG. RETAIL

W/ polished stainless steel case and white face, round W/ polished stainless steel case and carbon fiber-style face, round

ROAD KING ILLUMINATED STEERING HEAD LOCK COVER CLOCKS AND THERMOMETERS

SUG. RETAIL $91.95

69.95

2212-0057

PART # THERMOMETER 2212-0120

2212-0120 DESCRIPTION

0603-0135 SUG. RETAIL

W/ polished stainless steel case and white face, round (not backlit) OPTIONAL HANDLEBAR MOUNTING BRACKETS 0603-0135 For 7/8”-1” bars, chrome 0603-0170 For 11/4” bars, chrome

2212-0033

2212-0129

PART # DESCRIPTION THERMOMETERS 2212-0313 White face 2212-0314 Black face

SUG. RETAIL $91.95 91.95

91.95

DESCRIPTION Black ball compass White ball compass MOUNTING BRACKETS For 7/8”-1” bars; chrome For 11/4” bars; chrome

2212-0034

$69.95 19.95 19.95

SUG. RETAIL $64.95 64.95 19.95 19.95

2212-0036

•Analog clocks about the size of a quarter 2212-0037 •Are small enough to fit on the corner of a rearview mirror, but are still large enough to be easily seen •Can be mounted anywhere there is a flat surface with 3M™ sticky mount •Clocks are fully functional and feature a diver’s-style rotating bezel •Alloy case with stainless steel back •Shockproof and waterproof rated to 3 atm •Available in a variety of backface and bezel color combinations •Measure .85” dia. x .30” thick PART # 2212-0033 2212-0034 2212-0035 2212-0036 2212-0037

DESCRIPTION Black face, black bezel White face, black bezel White face, red bezel Black face, silver bezel White face, silver bezel

SUG. RETAIL $14.95 24.95 24.95 24.95 24.95

FLAT MOUNT CLOCKS AND THERMOMETERS •These simple but elegant chrome mounts with clock or thermometer can be mounted just about anywhere there is a flat surface •Can be attached in two ways: using the center hole and screw (screw not included), or via the included 3M® sticky-disk •Clock can be upgraded to Night Advantage electro-luminescent clock PART #2212-0057 for 2212-0164 best night viewing SUG. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL CLOCKS THERMOMETERS 2212-0163 White face $39.95 2212-0315 White face $39.95 2212-0164 Black face 39.95 2212-0316 Black face 39.95

C-MOUNTS

2212-0157

•Stunning polished billet mounting allows for virtually unlimited positions on your 1” handlebars •Simple lock screws hold the mount securely to bars and built-in micro thin rubber scuff sleeve ensure bars won’t get scratched •C-mounts include low-profile Formotion clock or thermometer (C-mount with clock can be upgraded to Night Advantage electro-luminescent clock PART #2212-0057 for the best night viewing) C-MOUNT WITH THERMOMETER 2212-0159

TRANSMISSION & DRIVELINE GASKETS & SEALS

LIGHTING

2212-0035

SPOT CLOCKS™

•Features an all-alloy case with a show-chrome finish •360° viewing ball makes for easy reading at any mounting angle •Can be swiveled in any direction on its mounting base 2212-0039 2212-0040 •Features liquid damping for quick settling over even the roughest terrain 0603-0135 •Mounts to any 1/4” bolt, and can be mounted to handlebars with optional handlebar mounting bracket and clamps •Choose from compass ball in black or white •Easily calibrated for accuracy •Measures 1.91” dia. x 1.87” H

C-MOUNT WITH CLOCK 2212-0155

ENGINE

ELECTRICAL

VISION 360™ COMPASS

PART # 2212-0039 2212-0040 OPTIONAL HANDLEBAR 0603-0135 0603-0170

FUEL/AIR SYSTEMS

2212-0128

•316L stainless steel fork lock cover with clock or themometer for all Harley Road Kings •Push the top button for instant backlighting for nighttime viewing •Gauge bolts into the swivel base so there’s no need to worry about it falling out or being stolen •Clock features Fomotion’s EL207 Night Advantage clock, tough Citizen movement, water-resistant to 3 atm PART # DESCRIPTION CLOCKS 2212-0128 White face 2212-0129 Carbon fiber black face

$69.95

EXHAUST

DESCRIPTION White

SUG. RETAIL $59.95

C-MOUNT WITH CLOCK 2212-0157

C-MOUNT WITH THERMOMETER 2212-0161

All part numbers in BOLD MAGENTA are new for 2011.

DESCRIPTION Black

SUG. RETAIL $59.95

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1339


SECTION

21

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST

RADAR DETECTOR MOUNT KIT

•One-piece set mounts to the center windshield support on all models •Gauge support is made from billet aluminum with a Show-chrome finish •Both gauges have a gold bezel •Made in the U.S.A.

•Slipstreamer’s radar mount kit allows most radar detectors to be mounted to 1” diameter handlebars •Constructed from black anodized aluminum with a 3/16” clear acrylic mounting plate •Measures 41/4” L x 31/4” W •Made in the U.S.A.

PART # 2212-0130

PART # RM-1

THERMOMETER AND CLOCK GAUGE SET

DESCRIPTION Gauge set

SUG. RETAIL $74.95

DESCRIPTION 1” radar mount kit

HANDLEBAR MOUNT CLOCK •Chrome housing •Clamp fits 7/8” and 1” diameter handlebars •Includes all necessary mounting hardware

SUG. RETAIL $37.95

PART # 0603-0099

DESCRIPTION Handlebar mount clock

SUG. RETAIL $45.95

FUEL/AIR SYSTEMS ENGINE

CRIBCLICKER™ MOTORCYCLE GARAGE DOOR OPENER KIT •Now you can control an automatic garage door opener or gate without dismounting from bike •Simple installation allows use of most garage door and gate opener brands •Works on any motorcycle with a switched 12V source such as headlight high-beam •Kit comes with one receiver, one transmitter and posi-tap connectors •Up to seven transmitters can be added to same receiver; additional receivers and transmitters available, sold separately •Made in the U.S.A.

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

PART # 2130-0049 2130-0050 2130-0051

2130-0049

DESCRIPTION CribClicker kit CribClicker transmitter CribClicker receiver

LIGHTING

SUG. RETAIL $99.95 39.95 59.95

POW-FLG

HANDLEBARS, CONTROLS & MIRRORS CABLES

0521-0023

USA-FLG Mount

BRAKES FOLDING FLAG MOUNTS

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1340

DIX-FLG

•Bolts directly to bar on Harley-Davidson tour box racks on most classics •Folds down easily to avoid poking a hole in bike cover; push-button places mount in folded position, solid stainless pin locks mount in upright position •Made of polished stainless steel •Includes an American flag •POW-MIA and Dixie flags sold separately •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 9” WITH 6” X 9” FLAG RFMFLD For 1/2” bars $80.95 0521-0422 For 5/8” bars 84.95 13” WITH 10” X 15” FLAG 0521-0023 For 1/2” bars 96.95 0521-0431 For 5/8” bars 101.95

0521-0440

FLAGS •Double-sided flags hold up to highway speeds •Poly-cotton blend and heavy screen printing give flags durability •Made to go over a 3/8” pole •Choose from American, POW-MIA, Dixie and Jolly Roger flags •Choose from 6” x 9” or 10” x 15” flags •Made in the U.S.A. SUG. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL 6” X 9” 10” X 15” USA-FLG American $11.95 0521-0026 American $15.95 DIX-FLG Dixie 11.95 0521-0027 POW-MIA 15.95 POW-FLG POW-MIA 11.95 0521-0441 Jolly Roger 15.95 0521-0440 Jolly Roger 11.95

SQUARE RACK FLAG MOUNTS •Polished 304 stainless steel mount bolts directly to the square 5/8” sport racks on Softail, Sportster and Dyna Glide •Mount, as well as pole, can be easily detached via a small setscrew •Includes an American flag •Made in the U.S.A. FOR SOFTAIL, SPORTSTER AND DYNA GLIDE

RFMSQ

PART # RFMSQ 0521-0022

DESCRIPTION W/ 6” x 9” flag W/ 10” x 15” flag

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $46.95 63.95


SECTION

21

WINDSHIELDS TOURING

0521-0224 0521-0225

0521-0223

LUGGAGE

ANTENNA FLAG MOUNT KITS AIR WING RACK FLAG MOUNT ®

•Rear flag mount attaches to vertical mounting bar of the Air Wing ® Harley-Davidson luggage rack •Allows use of entire rack for luggage •Includes 6” x 9” American flag PART # 0521-0883

DESCRIPTION Air Wing® rack flag mount

SUG. RETAIL $64.95

•Easily and securely mounts flags to antennas •Will not work its way up antenna at highway speeds •Heavy-duty nylon rod and nylon clamps keep mount securely attached to your antenna •Choice of American, POW-MIA and Dixie flag •Flags measure 6” x 9” •Made in the U.S.A. PART # 0521-0223 0521-0224 0521-0225

DESCRIPTION POW-MIA American Dixie

FIXED FLAG MOUNTS

0521-0778

•Polished 304 stainless steel flag mounts bolt to 7/8” bars for the license plate frame on Road Kings, Road Glides and Classics •Small setscrew secures pole in mount and can be easily removed for changing flags •Bore fitting for a strong hold without cracking the chrome of your bar •Includes an American flag •Made in the U.S.A. PART # RFMFXD2 0521-0025

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

RFMFXD2

GASKETS & SEALS DESCRIPTION W/ 6” X 9” flag W/ 10” X 15” flag

•Bolts to 3/4” saddlebag bars found on larger Harley-Davidson bikes; bore fitting makes a strong hold without cracking chrome on the bag bar •Made of polished stainless steel •Includes an American flag; POW-MIA and Dixie flags sold separately •Available with 6” x 9” flag or 10” x 15” flag •Made in the U.S.A.

SUG. RETAIL $63.95 74.95

DESCRIPTION W/ 6” x 9” flag W/ 10” x 15” flag

0521-0024

SIDE MOUNT SISSY BAR FLAG MOUNTS •Polished 304 stainless steel flag mount bolts directly to the square 1/2”, 9/16” and 5/8” round sissy bars on most Softails, Sportsters and Dynas •Mount, as well as pole, can be easily detached via a small setscrew •Includes an American flag; POW-MIA flag available separately •Available with 6” x 9” flag or 10” x 15” flag •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 1/2” SQUARE SISSY BARS RFMSQSB W/ 6” x 9” flag $46.95 0521-0196 W/ 10” x 15” flag 63.95 FOR 5/8” ROUND SISSY BARS 0521-0778 W/ 6” x 9” highway flag 60.95 0521-0779 W/ 10” x 15” parade flag 74.95 FOR 9/16” ROUND SISSY BARS 0521-0780 W/ 6” x 9” highway flag 60.95 0521-0781 W/ 10” x 15” parade flag 74.95

SUG. RETAIL $55.95 69.95

DESCRIPTION

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

TANKS & OIL FILTERS

13” STAINLESS FLAG POLE

PART # 0521-0028

TOUR PACK SOLID FLAG MOUNTS •Excellent alternative to plastic flags that mount on the side of the pack •Made of hand-polished stainless steel •Pole is removable to easily change flags or put away for storage •Includes an American flag •POW-MIA and Dixie flags sold separately •Includes Allen keys for easy installation •Made in the U.S.A.

ELECTRICAL

BRAKES

•Replacement stainless steel pole is interchangeable with all existing flag mounts •Fits the larger flags •Made in the U.S.A.

PART # WITH 6” X 9” FLAG 0521-0226 0521-0425 0521-0428 WITH 10” X 15” FLAG 0521-0227 0521-0434 0521-0437

EXHAUST

RFMSQSB

SADDLEBAG BAR FLAG MOUNTS

PART # RFMPL 0521-0024

SUG. RETAIL $17.95 17.95 17.95

SEATS & SISSY BARS

DESCRIPTION 13” pole

DASHES & GAUGES

SUG. RETAIL $17.95

0521-0428

SUG. RETAIL

For 1/2” bars For 3/8” bars For 5/8” bars

$51.95 51.95 55.95

For 1/2” bars For 3/8” bars For 5/8” bars

68.95 68.95 69.95

9001-0003

9001-0004

FLAGS •Double-sided, heavy-duty polyester flags •Fit 3/8” poles; include O-ring •Dimensions: 6” H x 9” W PART # 9001-0003 9001-0004

All part numbers in BOLD MAGENTA are new for 2011.

DESCRIPTION POW/MIA U.S.A.

SUG. RETAIL $6.95 6.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1341


SECTION

21 0521-0042

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

FLAG, POLE AND HOLDER •Fly the flag with pride •Stylized holder with adjustable angle clamps sturdily onto any 1/2” or 3/4” diameter tubing •Includes 1/2” diameter flagpole for a blended, one-piece look, or insert your own flag pole – tapered holder will secure 1/4” to 3/8” diameter flagpole •Includes 11” x 6” American flag PART # 0521-0042 0521-0862

DESCRIPTION 1/2” vertical flag mount kit 3/4” vertical flag mount kit

SUG. RETAIL $79.95 69.95

ENGINE LICENSE PLATE MOUNTED

ELECTRICAL

PART # 2030-0224

stainless steel that has been hand polished to a brilliant shine; will never rust or tarnish •Easily mounts to all license plate holders and will remain sturdy even at highway speeds •Accommodates 6” x 9” flags (not included) •Includes clips to keep flags in place at pole tops •Made in the U.S.A. PART # 2030-0515

DESCRIPTION License plate mounted double flag holder

SUG. RETAIL $49.95

LIGHTING 75000

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

75002

CUSTOM VINYL GRAPHICS

75004

•Add some sizzle to your bike •Custom vinyl graphics resist fuel, fading and scratches •100-mph tested – thin profile and design keeps these stickers in place •Each kit contains six flames: two large, two medium and two accent flames PART # 75000 75002 75004

DESCRIPTION Flames Euro flames Skull flames

•Support plate and plate bracket bolt behind the license plate •Flag staff measures 12” long and the angle can be easily adjusted without tools •Includes 41/2” x 81/2” American flag •For use with 4” x 7” license plates, 53/4” x 23/4” center distance, mount has 3” offset NOTE: Be sure the motorcycle license plate mount is strong enough to support the force applied by a flag at speed.

TRANSMISSION DOUBLE FLAG HOLDER & DRIVELINE •High-quality flag holder and poles made from GASKETS & SEALS

LICENSE PLATE FLAG MOUNT

SUG. RETAIL $27.95 27.95 27.95

DESCRIPTION License plate flag mount

REFLECTIVE TAPE KIT •An inexpensive way to ensure visibility •Adhesive strips easily attach to helmets, motorcycles, bikes, snowmobiles and ATVs •Kit contains two 8” L x 1/2” W and four 3” L x 1/2” W weather-resistant strips •Made in the U.S.A. PART # RST-585

DESCRIPTION Reflective tape kit

SUG. RETAIL $9.95

CRUSADER MALTESE CROSS ACCENT •Quality chrome-plated billet aluminum construction •23/16” cross fits on any flat surface on bikes, cars or trucks •Uses special double-sided heat-resistant tape •Matches Novello Crusader Maltese Cross points cover, derby cover, oil dipstick cap, mini horn cover, inspection cover, transmission cover, primary cover, triple tree cover and gas cap •Made in the U.S.A.

FRAMES, PART # DESCRIPTION 1901-0153 SUSPENSION 1901-0122 0940-0612 Billet accent 1901-0154 1901-0121 & FENDERS 1901-0123 FOOTRESTS AIR FLOW MESH KITS & LICENSE •Easy to install, do-it-yourself kit PLATE FRAMES •Large 18” x 18” mesh is enough to cover radiators and bodywork vents •Lightweight aluminum mesh in square, diamond, honeycomb, round or oval pattern TIRES, LEATHER/ TUBES & •Stylish and functional CHROME CONCHOS be polished, painted or powder-coated to achieve many different •Quality leather and chrome WHEELS •Can looks while adding style and protection conchos make ideal trim for •Made in the U.S.A. HARDWARE, saddlebags, seats, jackets, PART # DESCRIPTION SUG. RETAIL chaps and vests CHEMICALS Square $48.95 •Easy mounting; just tie on & TOOLS 1901-0121 1901-0122 Diamond 48.95 •Sold in packs of five Honeycomb 48.95 •Made in the U.S.A. COVERS, 1901-0123 DESCRIPTION Round 48.95 PART # SECURITY 1901-0153 Leather and chrome conchos Ovalesque 48.95 DS-110910 & GENERAL 1901-0154

1342

SUG. RETAIL $94.95

All part numbers in BOLD MAGENTA are new for 2011.

SUG. RETAIL $35.95

SUG. RETAIL $29.95


SECTION 4201-0184

4201-0178

WINDSHIELDS

S&S SERVICE MANUALS •Created to help maintain S&S engines •Outline the procedures necessary for both home mechanic and shop technician to ensure maximum performance and longevity •Made in the U.S.A. PART # 4201-0181 4201-0182 4201-0183 4201-0184

TOURING MOTORCYCLE REPAIR MANUALS

DESCRIPTION For S&S T-series engines (T124) For S&S 41/8” bore V-series engines (V124, V117, V11) For S&S 35/8” and 4” bore V-series engines (V88, V96, V107, V113) For S&S SH-series engines (SH80, SH93, SH93H, SH103, P93, P93H, P103)

MOTORCYCLE REPAIR MANUAL

SUG. RETAIL $30.95 30.95 30.95 30.95

4201-0072

•Manual is based on a complete teardown and step-by-step rebuild •Covers everything from changing an oil filter to a complete engine rebuild •Hard-bound format PART # HM-2478 4201-0072 4201-0038

21

SUG. RETAIL $35.95 35.95 35.95

DESCRIPTION Covers all 99-03 Twin Cam 88 Covers 70-99 Shovelhead and Evolution Big Twins Covers all 70-03 Sportsters (hardcover)

•Whether it’s simple maintenance or complete restoration, don’t start work without Clymer, the leader in service manuals •Save yourself time and frustration with these procedures and techniques used by the professionals •Comprehensive manuals contain exploded views, drawings, specifications and charts to illustrate each job •Feature shortcut repairs and high-performance modifications PART # DESCRIPTION SUG. RETAIL 4201-0136 For 99-05 FLHT/FLT Twin Cam 88 and 103 $36.95 4201-0146 For 00-05 FLST/FXST Twin Cam 88B 47.95 4201-0100 84-98 FLHT/FLT/FXR Evolution 47.95 M421 84-99 FX/FL, FXST/FLST, Big Twin Evolution 36.95 4201-0198 For 06-09 FLST/FXST/FXCW 51.95 4201-0174 91-98 FXD 36.95 4201-0121 For 99-05 FXD/FXDWG/Twin Cam 36.95 M420 66-84 Shovelhead 36.95 M418 48-65 Panhead 36.95 4201-0101 04-09 Sportster 51.95 4201-0169 86-03 Sportster 47.95 M419 59-85 Sportster 36.95 4201-0178 02-07 VRSC 47.95

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

PEGBOARD RACK •Rack attaches to pegboard and holds 30 to 35 manuals •Measures 24” W x 15” H x 10” D PART # HM-DR8

FREESTANDING RACK •This freestanding rack has 16 frontfacing pockets •Each pocket holds two manuals •Measures 18” W x 56” H x 23” D PART # DESCRIPTION HM-DR2 Freestanding rack, holds 32 manuals

DESCRIPTION Pegboard rack, holds 30 to 35 manuals

SUG. RETAIL $9.95

ROTATING RACK

PART # HM-DR-36

$24.95

HANDLEBARS, CONTROLS & MIRRORS CABLES

•Rotating rack is freestanding and has 36 frontfacing pockets •Measures 24” W x 70” H x 24” D SUG. RETAIL

LIGHTING

SINGLEPOCKET RACK

DESCRIPTION Rotating rack, holds 36 manuals

SUG. RETAIL $25.95

•Single-pocket rack allows manuals to be positioned adjacent to replacement parts and accessories •Measures 9” W x 11” H x 5” D PART # HM-DR18

DESCRIPTION Single-pocket rack

SUG. RETAIL $4.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

ROTARY FLOOR DISPLAY FOR CLYMER MANUALS

C6

DISPLAY RACKS COUNTERTOP FIVE-POCKET RACK

•Showcase your service and repair manuals for optimum sales

•Each pocket holds three manuals •Measures 9” W x 22” H x 14” D

PART # C-6

PART # HM-DR1

DESCRIPTION 5-pocket rack, holds 15 manuals

SUG. RETAIL C-9 $12.95

DESCRIPTION 24-manual display rack (free w/ purchase of 20 manuals) 36-manual display rack (free w/ purchase of 30 manuals)

•Showcase 25 different Clymer titles per unit •Rotary design occupies minimum floor space •Let your customers browse the full line of Clymer repair manuals to find the right one for their bike PART # DESCRIPTION SR-25 Rotary floor display rack

All part numbers in BOLD MAGENTA are new for 2011.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1343


SECTION

21

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS

TRIGGER-LOCK WINDSHIELD DISPLAYS •Attention-grabbing display for increasing 9903-0287 your profits on Memphis Shades windshields 9903-0286 •Display utilizes a genuine Trigger-Lock shield mounting system so customers can be shown how quick and easy Memphis Shades fairings and shields can be attached or removed •Hangs on slatwall or gridwall •Durable aluminum and thermoformed plastic •Made in the U.S.A.

WHAT TO ORDER •Order choice of display mounting plates and the display

EXHAUST

NOTE: Fats/Slims, Sportshields and Batwing Fairings must be purchased separately.

9903-0287 PART # 9903-0286 9903-0287 9903-0288 9903-0289 9903-0290

MEM0950

9903-0288

9903-0290

DESCRIPTION Display unit Display mounting plates for Fats/Slims Display mounting plates for Sportshields Display mounting plates for Batwing Fairing PART #2330-0017 Display mounting plates for Batwing Fairing PART #2330-0023

MEM0960

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

COLOR FAN •Made by Memphis Shades, these windshield color chips are bolted together so you can fan them out and show your customers available color options •Compact eye-catching sales tool fits in palm of hand and attracts attention •Made in the U.S.A. PART # DESCRIPTION MEMFAN Memphis Shades color fan

MANNEQUIN AND WINDSHIELD HOLDER •Actual size fork/headlight store display fixture for Memphis Shades windshields •Hangs on slatwall or gridwall •Durable aluminum and thermoformed plastic •Use to display or demonstrate windshields •Acrylic windshield holder for mannequin is also available; updates the mannequin so you no longer need handlebars PART # DESCRIPTION or hardware to MEM0950 Display mannequin display windshields MEM0960 Windshield holder for mannequin •Made in the U.S.A.

ABS HOLDER FOR WINDSHIELD INSTALLATION •Convenient temporary holder for plastic or hardware installation •Protects windshield from scratching during installation •Made in the U.S.A. PART # MEM0965

DESCRIPTION ABS holder

WINDSHIELD SIZING GUIDE

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

•It’s like 20 windshields in one – every profile is clearly outlined so that a customer can look at every Memphis Fats/Slim and Sportshields in each size available, all at once •Take the guesswork out of fitting windshields for customers •Hold the sizing guide above the motorcycle’s headlight and let the customer decide exactly which style of windshield they want •All sizes and styles of Memphis Shades windshields are clearly marked on this fantastic sales aid •Intended for dealer use only •Made in the U.S.A.

PART # 9001-0001

DESCRIPTION Sizing guide

TANKS & BAR STOOL a three-color OIL FILTERS •Features Drag Specialties logo DASHES & GAUGES

on the seat •Highly polished chromeplated pedestal •Great for store counter or the shop •Some assembly required •Made in the U.S.A.

DRAG SPECIALTIES CANOPY

•10’ x 10’ Drag Specialties canopy FRAMES, •The perfect item for any Drag Specialties dealer SUSPENSION DESCRIPTION SUG. RETAIL PART # DESCRIPTION SUG. RETAIL PART # & FENDERS 10’ x 10’ Drag Specialties canopy $249.95 DS-900998 Bar stool $78.95 4030-0009 FOOTRESTS & LICENSE CATALOG RACK 4201-0086 •Organize and display your catalogs for easy access PLATE FRAMES •Constructed of heavy-gauge metal with end wings for long life TIRES, DRAG •Inclined 30° for easy viewing TUBES & SPECIALTIES •Includes three 3.5” sections, four 2.25” sections WHEELS LIGHTED SIGN and three 1” sections; replacement sections •This eye-catching, back-lit sign is screen also available separately HARDWARE, printed with bright inks •Made in the U.S.A. CHEMICALS •Vacuum-formed polystyrene plastic light box NOTE: One catalog rack free with a $2,000 shippable order. illuminated by one 18” straight flourescent & TOOLS is Limit one per order, maximum of three per dealer. bulb with a styrene face panel PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION SUG. RETAIL COVERS, •Measures approximately 22” L x 12” H DESCRIPTION 4201-0086 Catalog rack $254.95 4201-0172 Repl. 2.25” binder rack SECURITY PART # - 4201-0173 Repl. 3.5” binder rack Drag Specialties lighted sign 4201-0171 Repl. 1” binder rack & GENERAL 9903-0138

1344

All part numbers in BOLD MAGENTA are new for 2011.


SECTION

21

WINDSHIELDS DRAG SPECIALTIES OIL DISPLAY

BATTERY DISPLAY RACK

•Five-tray display showcases Drag Specialties oils and lubricants •Contact your Drag Specialties rep for information on how to receive a free promotional display PART # 9903-0103

TOURING

•Holds a great selection of Drag Specialties batteries in less than two square feet of floor space •Measures 241/2” L x 10” W x 47” H •Easily assembled – no tools required •Colorful header card included

•Wall-mount rack attaches to any wood or cement surface, holds approximately 200 sets of brake pads or shoes, and includes all hardware and anchors for mounting PART # DESCRIPTION DIS-11 Wall-mount rack

NOTE: Ask your Drag Specialties sales representative how to receive the battery display at no charge. DESCRIPTION Drag oil display

PART # 9903-0022

LUGGAGE

BRAKE PAD DISPLAY RACK

DESCRIPTION Battery display rack

SEATS & SISSY BARS

SUG. RETAIL $272.95

EXHAUST FUEL/AIR SYSTEMS

RE-ORDER INVENTORY TAGS

ENGINE

•Remember what Drag Specialties parts you need to restock with these re-order inventory tags

DS-800108

TRANSMISSION & DRIVELINE

9904-0803

DRAG SPECIALTIES DEALER BANNERS •Two-color plastic exterior banner with four eyelets •Sold each

PART # DESCRIPTION SUG. RETAIL 9904-0425 Drag Specialties re-order inventory tags $3.95

PART # DS-800108 DS-800109 9904-0803

DESCRIPTION Drag banner, 11/2’ x 4’ Drag banner, 21/2’ x 8’ Drag/Python banner, 4’ x 11/2”

SUG. RETAIL $15.95 25.95 15.95

GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

DOOR/TRUCK DECALS

DRAG SPECIALTIES/ SBS DISPLAY SIGN •Wall-mount display sign with a color-screened logo •Measures approximately 25” x 12” •Available at no cost with a purchase of $200 or more Drag Specialties/SBS brake pads PART # DESCRIPTION SUG. RETAIL 9904-0760 25” x 12” Drag Specialties/ $19.95 SBS display sign

•Show your loyalty •Work great on windows, trailers and trucks

BAGS •15” L x 18” W heavy-duty, 3-mil plastic bags •Feature Drag colors and emblem, patch handles •Box of 100 SUG. PART # DESCRIPTION RETAIL DS-800096 Large shopping bags $26.95

PART # DS-800115 DS-800116 DS-800117 DS-800118 DS-800111 DS-800119 4320-0821 4320-0822

DESCRIPTION 3” decal (50-pk.) 6” decal (50-pk.) 9” decal (10-pk.) 12” decal (10-pk.) 24” decal (ea.) 42” decal (ea.) 4” L Python decal 6” L Python decal

SUG. RETAIL $15.95 34.95 27.95 27.95 11.95 30.95 7.95 7.95

DRAG SPECIALTIES CATALOGS/ CATALOG CD/PRICE LISTS PART # 9901-0987 9901-0989 9901-0988 9901-0984 9901-0986 9901-0985

DESCRIPTION 2011 FatBook catalog 2011 FatBook CD (10-pk.) 2011 FatBook dealer price list 2011 OldBook catalog 2011 OldBook CD (10-pk.) 2011 OldBook dealer price list

•High-quality Bic® Clic pens with Drag Specialties’ logo •100 pens per box DESCRIPTION Pens w/ Drag Specialties logo

SUG. RETAIL $.50 (ea.)

9904-0083

FLOOR MATS •Industrial-grade, rubber-backed floor mat •Measures 3’ W x 5’ L PART # DESCRIPTION SUG. RETAIL 9904-0021 Z1R $94.95 9904-0083 ICON 94.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

PENS PART # PRE116

CABLES

9904-0021

All part numbers in BOLD MAGENTA are new for 2011.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1345


SECTION

21

WINDSHIELDS

•P.O.P. display showcasing Rivco’s oil filter wrench •No charge with purchase of two 10-pack cards (PART #3801-0166); see your sales rep for details

LUGGAGE

PART # 9904-0864

SEATS & TIRE RACK SISSY BARS MERCHANDISER •An inexpensive yet effective way to EXHAUST FUEL/AIR SYSTEMS

DESCRIPTION Oil filter wrench P.O.P. display

display tires •Holds approximately 20 to 30 tires and comes with all mounting hardware •One free tire rack with purchase of 50 tires; limit three per dealer •Made in the U.S.A. PART # DISTIRE

DESCRIPTION Merchandiser tire rack

BASSANI SIGN

TRANSMISSION & DRIVELINE

•Embossed metal construction •Predrilled holes for easy wall mounting •18” x 101/4”

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

STEADYMATE DISPLAY

PART # 9904-0727

•It’s like a salesperson and a shelving unit in one attention-getting display •Double-sided unit demonstrates shorter versions of actual tiedowns and packed with information to assist customers in selecting the model that’s right for them PART # 9903-0315

TANKS & OIL FILTERS DASHES & GAUGES

DESCRIPTION Bassani sign

SADDLEMEN SIGN

PART # 9904-0221

DESCRIPTION Saddlemen sign

CABLE RACK DESCRIPTION Steadymate display

•Single-tier wall rack measures 36” W and holds up to 200 cables on 20 slots •Rack header can be used to identify cables PART # K28-0000

DESCRIPTION Single-tier cable rack

METAL SIGN

DESCRIPTION Sign

SUG. RETAIL $11.95

POP FLOOR DISPLAY

•.025” die-cut aluminum sign •Draw attention to display areas or window •Measures 14” W x 17.5” H PART # 9904-0768

SUG. RETAIL $19.95

DESCRIPTION P.O.S. Tower

•Oval three-dimensional embossed metal sign •Features colorful Saddlemen logo •Affix with included double-sided tape or hang with a tack •Dimensions: 16” x 10”

CABLES BRAKES

•Designed for maximum sales, this illuminated galvanized steel display stand is a high-impact, small footprint revenue center! •Designed to hold a selection of our entire range of products •Features five shelves and side hooks •Well suited for low-light areas to create an eyepopping pink glow PART # 9903-0282

SUG. RETAIL $138.95

ENGINE

GASKETS & SEALS

ILLUMINATED P.O.S. TOWER

OIL FILTER WRENCH P.O.P. DISPLAY

TOURING

•The POP is a triangular grid floor display •Each side measures 5’ H x 2’ W •Includes all necessary materials and hooks for assembly and display

SUG. RETAIL $21.95

9904-0228

PART # 9903-0104

DESCRIPTION Wall display

9904-0229 FRAMES, SUSPENSION & FENDERS FOOTRESTS YUASA BATTERY & LICENSE DISPLAY RACK 9904-0260 PLATE FRAMES •Heavy duty steel construction with TIRES, METAL TACKER SIGNS three large •Promotional metal tacker signs TUBES & wire shelves •Made from die-cut and embossed WHEELS •Includes wheel-kit for .025” aluminum easy mobility SUG. •Shelf liners included HARDWARE, DISPLAY RACK PART # DESCRIPTION DIMENSIONS RETAIL •Comes with removable CHEMICALS •Wall-mount display rack 17.25” x 20” $14.95 9904-0228 Legend air application chart for & TOOLS for DP Brakes 9904-0229 Built to ride 15.125” x 20” 14.95 •Topped off by a DP easy updating Brakes header 9904-0260 Drag •Measures 37” W x 62” H x 15” D COVERS, Specialties 7” x 23.5” 16.95 PART # DESCRIPTION SUG. RETAIL DESCRIPTION SECURITY PART # $79.95 9903-0154 Yuasa battery rack Part of Independent Cycle. & GENERAL 9903-0144 Wall-mount display rack 1 1

1

1346

All part numbers in BOLD MAGENTA are new for 2011.


SECTION

21

WINDSHIELDS

V-TWIN SPARK PLUG DISPLAY •Display rack holds 16 four-packs of NGK Iridium IX spark plugs that fit virtually all domestic V-Twin applications •Free-standing or wall-mountable PART # DESCRIPTION 9903-0153 NGK spark plug cabinet

TOURING

NGK DISPLAY CABINET

NGK WIRE DISPLAY RACK

•Easy loading and dispensing; will hold over 600 plugs •Convenient storage in door for application materials •Mounts easily to any wall •Rugged steel construction with gloss black finish •Measures 18” W x 23” H x 8” D PART # DESCRIPTION DIS-43 Display cabinet

•Holds 120 individual plug boxes and up to 12 different part numbers •Easy loading and dispensing •Counter stand or slatwall mount •Rugged steel wire rack with black powder-coat finish •Measures 143/4” W x 133/4” H x 5” D PART # DESCRIPTION DIS-506 Display rack

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

THUMPER HELMET SPEAKER DISPLAY

SKABS™ BOWL DISPLAY

•The easy way to increase sales of this hot product •Designed to display six units •Display is free with an order of 10 helmet speakers (PART #4403-0043) •Ask your Drag Specialties sales representative for details PART # 9903-0270

DESCRIPTION Thumper helmet speaker display

ENGINE

•P.O.P. bowl display containing 25 6-packs of Skabs tire patches •Super-sticky pre-glued patches adhere to tubes instantly •Each pack comes with a convenient plastic container, a metal scuffer and six patches •Sold to consumer as each; price reflects each pricing PART # DESCRIPTION SUG. RETAIL 0364-0016 Skabs bowl display $2.95

GASKETS & SEALS SR-i500 DISPLAY •Fully operational display allows visual and audible demonstrations of Scorpio SR-i500 series security systems •Includes built-in SR-i500SE circuitry with muffled siren and operational remote •Turn signals and headlight on bike light up •Sits on countertop or can be wall mounted •See pages 1305-1307 for Scorpio security systems

PROMO DANGLERS •Enhance the visibility of your Drag Specialties chargers with this handy promotional dangler •Available in 150-pack

TRANSMISSION & DRIVELINE

PART # 9901-0963

DESCRIPTION Promo dangler (150-pk.)

PART # 9903-0093

DESCRIPTION SR-i500 display

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS

DISPLAY RACK •For a limited time, receive a free five-tray display rack when you purchase $600 worth of Maxima lubricants or pay just $41.90 with a $300 purchase •Five-tray display measures 251/2” x 161/2” x 55” •Made in the U.S.A.

DISPLAY RACK •Four-shelf display draws customers’ attention to S100 products PART # DIS38

DESCRIPTION S100 display rack

PART # DIS15

TIRE SHOES •Great tool to boost Metzeler sales •Available at no charge with purchase of six tires •Made in the U.S.A. PART # 9903-0061

DESCRIPTION Metzeler tire shoes (pr.)

DASHES & GAUGES DISPLAYS •Enhance sales with these attractive pointof-purchase displays DESCRIPTION Display rack

PART # 9903-0004 9903-0005

DESCRIPTION Header hooks, and gridwall Hang strip

TIRE SHOES •Great tool to boost Pirelli sales •Available at no charge with purchase of six tires •Made in the U.S.A. PART # DESCRIPTION 9903-0060 Pirelli tire shoes (pr.)

All part numbers in BOLD MAGENTA are new for 2011.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

1347

21 COVERS, SECURITY AND GENERAL2011  

1267 1701-1001 1701-1003 All part numbers in BOLD MAGENTA are new for 2011. WINDSHIELDS BRAKES LUGGAGE EXHAUST HANDLEBARS, CONTROLS & MI...

Advertisement