Page 1

BEST OF  2017

WER.PRI.BOB.EN.2017

SW-MOTECH GmbH & Co. KG Ernteweg 8/10 . 35282 Rauschenberg . Germany phone +49 6425 8168-050 . fax +49 6425 8168-10 info@sw-motech.com . www.sw-motech.com


BEST OF 2017 Contents

(a) reservation of title shall extend to products arising from the processing, mixing and combining of our Goods to their full value, in which case, however, we shall be regarded as the producer. If, in processing, mixing or combining them with the Goods of third parties their right to ownership remains, we shall acquire co-ownership in the ratio of the invoice value of the processed, mixed or combined Goods. Otherwise, the same shall apply to the product emerging as to the Goods delivered under the reservation of title. (b) The Purchaser shall assign demands arising from re-sale of the Goods or the products against third parties already now in full or at the amount of any co-ownership share of ours in accordance with the above paragraph as surety to us. We accept such assignment. The duties of the Purchaser stated in sub-section 2 shall also apply in view of the assigned demands. (c) The Purchaser is also authorised to collect the demand as well as we are. We undertake not to collect the demand as long as the Purchaser meets his payment obligations towards us, does not come into default of payment, no application for the opening of insolvency proceedings has been made and no other defect in his efficiency is apparent. Is this is the case, however, we may demand that the Purchaser notifies us of the assigned demands and their debtors, supplies all information necessary for collection, hands over the appropriate documents and notifies the debtors (third parties) of assignment. (d) If the realisable value of the sureties exceeds our demands by more than 10%, we shall release sureties in accordance with our choice on request by the Purchaser. Section 7: Purchasers claims for defects (1) The statutory regulations shall apply to the Purchasers rights in respect to material and legal defects including incorrect and reduced delivery and incorrect or defective assembly instructions) inasmuch as nothing else has been determined in the following. In all cases the statutory special regulations in case of final delivery of the Goods to a consumer remain unaffected (supplier recourse sections 478, 479 BGB). (2) The basis of our defect liability is, above all, the agreement made concerning the composition of the Goods. All product descriptions concerning the Goods, which are the subject matter of the individual contract, shall be regarded as agreement concerning the composition of the Goods; there is no difference here whether the product description originates from the Purchaser, from the producer or from us. (3) Inasmuch as the composition has not yet been agreed, it shall be judged in accordance with statutory regulation whether there is a defect or not (section 434 sub-section 1 sentence 2 and 3 BGB). We do not assume any liability, however, for public statements by the producer or other third parties (e.g. advertising statements). (4) The claims for defect claims of the Purchaser, who is a businessman, require that he has met his statutory examination and complaint duties without delay. Notice is regarded as without delay if it takes place within seven days in written form with a description of the defect. The same shall apply for defects which are discovered later. (5) If the item, which has been delivered, is defective, we may first of all choose whether we provide subsequent performance by eliminating the defect (subsequent improvement) or by delivery of an item free of defects (replacement deliv-

ery). Our right to refuse subsequent performance under the statutory prerequisites remains unaffected. (6) We are entitled to make the subsequent performance owed dependent on the Purchaser paying the due purchase price. The Purchaser is, however, entitled to retain a reasonable part of the purchase price in the ratio to the defect. (7) The Purchaser shall give us the time and opportunity necessary for the subsequent performance owed, in particular to hand over the Goods which are subject to complaint for purposes of testing. In the case of replacement delivery, the Purchaser shall return the defective item in accordance with the statutory regulations. Subsequent performance means neither removal of the defective item nor re-installation if we were not originally obliged to install. (8) We shall bear the expenditure necessary for examination and subsequent performance, in particular the transport, way, labour and material costs (not: removal and installation costs) if there is in actual fact a defect. If however, the defect elimination demand of the Purchaser turns out to be unjustified, we may demand the costs arising for this from the Purchaser. (9) In urgent cases, e.g. if operating safety is endangered or to avert disproportionate damage, the Purchaser has the right to eliminate the defect himself and to demand compensation for the objectively necessary expenses for this from us. We shall be informed about the action taken independently, if possible previously. There is no right to act independently if we would have been entitled to refuse such subsequent performance in accordance with the statutory regulations. (10) If subsequent performance has failed or a reasonable period to be set for the subsequent performance by the Purchaser has expired without success, or is dispensable in accordance with the statutory regulations, the Purchaser may withdraw from the Purchase Contract or reduce the purchase price. In the case of inappreciable defects, there is however no right of withdrawal. (11) Any Purchasers claims to damages or compensation for futile expenditure only exist in accordance with the stipulations of section 8 and are otherwise ruled out. Section 8: Other liability (1) Inasmuch as nothing else evolves from these General Sales Terms and Conditions including the following provisions, we shall be liable in the case of breach of contractual and non-contractual duties in accordance with the relevant statutory regulations. (2) We shall be liable for damages – no matter for which legal reason – in the case of intent and gross negligence. In the case of ‚simple‘ negligence, we shall only be liable a) for damage arising from fatal injury, physical injury or damage to the health b) for damage arising from the breach of a significant contractual duty (duty the performance of which enables correct execution of the Contract in the first place and on the adherence to which the contract partner may and generally rely); in this case, however, our liability is limited to compensation for the foreseeable, typically arising damage. (3) The limitations of liability stated in sub-section 2 shall not apply inasmuch as we have maliciously concealed a defect or have assumed warranty for the composition of the Goods. The same shall apply to the Purchasers claims in accordance with the Product Liability Act.

(4) Due to any breach of duty, which does not consist of a defect, the Purchaser may only withdraw (from the Contract) or terminate if we are responsible for the breach of duty. Any free termination right of the Purchaser (in particular in accordance with sections 651, 649 BGB) is ruled out. Otherwise the statutory prerequisites and legal consequences shall apply. Section 9: Re-sale Active re-sale of our products by the Purchaser in countries outside Germany or active or passive re-sale in the US or Canada requires our previous expressed and written approval. In the case of such re-sale without our approval, the Purchaser shall indemnify us against any claim in particular for reasons of product liability or patent and trademark protection. Section 10: Purchasers own examination duties The Purchaser shall check within his own responsibility whether a product purchased by us may be assembled or used in accordance with the traffic and traffic licence provisions applicable in the intended place of use. We shall assume no liability for non-permitted assembly or taking into service unless we have expressly made a corresponding statement about the specific permissibility for the product. Section 11: Choice of law and place of jurisdiction (1) The law of the Federal Republic of Germany shall apply for these General Sales Terms and Conditions and all legal relationships between us and the Purchaser excluding international uniform law, in particular the CISG (UN Convention on Contracts for the International Sale of Goods). Prerequisites and the effects of the reservation of title in accordance with section 6 are subject to the law of the place in which the item is stored inasmuch as in accordance with that the choice of law made is impermissible or ineffective in favour of German law. (2) If the Purchaser is a businessman in the terms of the German Commercial Code, a legal entity under public law or a special fund under public law, the exclusive – also international – place of jurisdiction for all disputes arising from the contractual relationship, either directly or indirectly, shall be our seat of business in Rauschenberg. We are, however, also entitled to take action at the Purchasers general place of jurisdiction of the Purchaser. GSTAC as of 01.01.2017

SW-MOTECH GmbH & Co. KG Ernteweg 8/10 . 35282 Rauschenberg Amtsgericht Marburg, HRA 3946 . USt.ID: DE191 459 243 Personally liable: BAGS-CONNECTION Verwaltungs GmbH Fichtenweg 19 . 35066 Frankenberg . Amtsgericht Marburg, HRB 5067 Represented by: Jörg Diehl, Kai Jockel, Jürgen Swora, Achim Kessler Photo: Daniel Keller, Björn Becker (SW-MOTECH); Erik Peters: title, p. 119, 162, 172, 184; Detlev Louis Motorrad-Vertriebsgesellschaft mbH: p. 44, 64, 68, 70, 132, 138, 146; Nick Johnson: p. 66 Illustrations: Christian Geil, Björn Becker (SW-MOTECH)


3

4 LUGGAGE 84 PROTECTION 98 SAFETY 106 ERGONOMICS 112 NAVIGATION 120

POWER SUPPLY

IMPRINT Best Of 2017 / © 2017 SW-MOTECH GmbH & Co. KG Ernteweg 8/10, 35282 Rauschenberg, Germany Responsible for content: Johannes Klotz Editorial & concept: Björn Becker, Daniel Keller, Marieke Kräling, Pamela Stephens Layout: Björn Becker, Johannes Klotz, Petra Köster Print: Vogel Druck und Medienservice GmbH, Höchberg Errors and omissions excepted. Technical and design modifications are subject to change. SW-MOTECH GmbH & Co. KG is not liable for content correctness of printed ads.


Luggage Legend Gear

NEW

LR3

messenger bag The perfectly crafted LR3 messenger bag with a range of sophisticated features is made for daily urban use with or without motorcycle. Handsome styling guaranteed.

Features · Comfortable messenger bag, usable as tail bag · Padded one-handed and stepless adjustable shoulder strap, removable, suitable for left- and right-handers · Waist/cross strap included · Easy access and flexible organizer with internal secure zip pockets and padded laptop holder (up to 15") · Velcro ® equipped flap · Optional water-resistant internal roll-top closure included · Napalon synthetic leather and waxed canvas, splashproof inner lining, anodized aluminium buckles · 40 x 30 x 10 cm (fits standard documents)

LR3

12 l

BC.RUC.00.401.10000


5

NEW

LA5

tool bag Authentic retro styled tool bag with ideal size for small items like tools, wallet or other small items you may take on the road with you.

Features · Numerous loop and tie-down straps for universal fit · Optional use as belt or waist bag · Waist/shoulder strap included · High-quality zippers and Velcro ® · Flap features zip pocket · Padded main compartment · Napalon synthetic leather and waxed canvas, splashproof inner lining, anodized aluminium buckle · 24 x 7 x 11 cm

LA5

1.6 l

BC.TRS.00.407.10000


Luggage Legend Gear

LC1/LC2

side bag Vintage look LC1/LC2 side bag is designed with the ease of modern technology and fits SLC steel side carrier that features the quick lock system for flexible use.

Features · Can be installed on one or both sides of the bike · Available in two sizes and for right or left side · Quick lock system made from glass fiber reinforced polyamide · Rain protection by roll closure and waterproof inner bag · Napalon synthetic leather and waxed canvas, splash proof inner lining, anodized aluminium buckles · LC1: 14 x 26 x 31 cm, LC2: 14 x 35 x 31 cm

LC1 (left)

9.8 l

BC.HTA.00.401.10100L

LC1 (right)

9.8 l

BC.HTA.00.401.10100R

LC2 (left)

13.5 l

BC.HTA.00.402.10100L

LC2 (right)

13.5 l

BC.HTA.00.402.10100R


7

SLC

side carrier SLC side carrier easily installs on the bike for mounting LC1/LC2 side bags. Robust tubular steel serves as a secure foundation for supporting luggage on retro styled bikes. Mounting and removal of the side bags is done in seconds due to quick lock fasteners.

Features · Bike-specific design allows installation on both sides or one side only, ideal solution for bikes with high exhausts · No modifications are required for mounting · Structural steel tubing with durable powder coated black finish

SLC Applications

sw-motech.com


Luggage Legend Gear

LS1/LS2 saddlebag A taste of vintage: LS1/LS2 saddlebag will face every trip with ease and can be fastened easily to the versatile SLS saddle strap. Legend Gear offers unique individuality: bags in two sizes can be used on both or one side only and completed by accessory bags. · Bag can be attached in different heights, also compatible with high exhausts · Fastening loops and straps with anodized aluminium retaining hooks ensure safe and versatile mount of the saddle bag · Rain protection by roll closure and waterproof inner bag · Comfortable shoulder bag in combination with LA4 shoulder strap · Napalon synthetic leather and waxed canvas, splashproof inner lining · LS1: 14 x 26 x 31 cm, LS2: 14 x 35 x 31 cm LS1

9.8 l

BC.HTA.00.401.10000

LS2

13.5 l

BC.HTA.00.402.10000

SLS saddle strap SLS saddle strap is designed to fasten to almost any straight motorcycle bench seat providing secure support for LS1 and LS2 saddlebags. Enhanced style for café racers, retro and street bikes. · Modular carrying system with circumferential security straps under the seat provide additional anti-theft protection · Fastening loops and straps with aluminum retaining hooks ensure safe mount of LS1/LS2 saddlebags in different heights, so they can be used on bikes with high exhausts · Napalon synthetic leather · 39 x 21 cm

SLS Applications

BC.HTA.00.403.10000 sw-motech.com


9

LT1 tank bag The sleek LT1 tank bag attaches to any steel fuel tank by using powerful magnets for secure fit and a fuel tank friendly base. · Fits almost any steel fuel tank · Included: 4 straps for mounting on non-magnetic fuel tanks · Anti-skid bottom · Zippered expandable storage · Front cable feed-through · Robust carrying handle · Waterproof rain cover with clear PVC window · Compatible with accessory bags LA1, LA2 and LA3 · Napalon synthetic leather and waxed canvas, splash-proof inner lining · 18 x 10 x 25 cm LT1

3.0 - 5.5 l

Applications

BC.TRS.00.401.10000 sw-motech.com

LT2 tank bag The LT2 is a universal tank bag using a secure strap system fastened with aluminium buckle hooks that provide quick and easy access to the fuel cap. · Overlapping cap provides additional coverage · Front cable feed-through · Robust carrying handle · Waterproof rain cover with clear PVC window · Compatible with accessory bags LA1, LA2 and LA3 · Napalon synthetic leather and waxed canvas, splash-proof inner lining · 15 x 18 x 30 cm

LT2 Applications

5.5 l

BC.TRS.00.402.10000 sw-motech.com


Luggage Legend Gear

LR1

tail bag LR1 tail bag is usable as a tail bag or as backpack when venturing off the bike. LR1 performs as good as it looks.

Features · Universal fit for seat and tail rack · Suitable for bikes with high exhausts · Secure four point mounting straps · Adjustable, padded shoulder straps for use as backpack · Roll top design · Inside zip pocket and padded laptop sleeve (up to 15") · Waterproof rain cover · Napalon synthetic leather and waxed canvas, splashproof inner lining · 30 x 17 x 40 cm

LR1 Applications

17.5 l

BC.HTA.00.404.10000 sw-motech.com


11

LR2

tail bag Universal LR2 tail bag is a smart choice when storage matters. The secure strap mounting system also includes additional tie-down straps to increase stability.

Features · Universal fit for most motorcycle models, also for bikes with high exhausts · Anti-skid bottom · Secure four point mounting straps · Waterproof inner bag · Napalon synthetic leather and waxed canvas, splashproof inner lining · 68 x 45 x 30 cm

LR2 Applications

48 l

BC.HTA.00.405.10000 sw-motech.com


Luggage Legend Gear

LA1/LA2 accessory bag Legendary accessory bags can be fastened to almost all Legend Gear products. With their perfect mix of design and function the accessory bags are the ideal add-on for all Legend Gear products. · Fits Legend Gear tail bags, saddle bags and tank bags · Compatible with SLS saddle strap and SLA tank strap · Waterproof rain cover · LA1: designed with functional Velcro ® · LA2: designed with circumferential zipper · Napalon synthetic leather and waxed canvas, splashproof inner lining · LA1: 12 x 6 x 18 cm, LA2: 15 x 5 x 18 cm

LA1

0.8 l

BC.TRS.00.403.10000

LA2

1.2 l

BC.TRS.00.404.10000

SLA tank strap Vintage style tank strap SLA adds unique look to the bike. Military grade fastening system provides flexible and safe mount of Legend Gear accessory bags. · Perfect fit due to its bike-specific design · Adjustable strap · Napalon synthetic leather · 10.5 cm (width)

SLA Applications

sw-motech.com


13

LA3 smartphone bag LA3 Legend Gear smartphone bag allows mounting of your smartphone to any legendary gear and features pockets for cash, credit cards or IDs. · Suitable for screen size up to 5.5" · Touch screen friendly · Fits Legend Gear tail bags, saddlebags, side bags and tank bags · Compatible with SLS saddle strap and SLA tank strap · Circumferential zipper · Napalon synthetic leather · 9.4 x 2 x 18 cm

LA3

BC.TRS.00.405.10000

LA4

BC.TRS.00.406.10000

LA4 shoulder strap The versatile LA4 shoulder strap is designed to assist in carrying Legend Gear when away from the motorcycle. · Comfortable padded shoulder strap · Solid aluminium fastening hooks · Adjustable length from 90 to 150 cm · Napalon synthetic leather · 3.8 x 150 (90) cm


Luggage side cases / TRAX ADV

TRAX ADV – Ready for adventure! TRAX ADV is made for adventure. This strong and sleek premium aluminium touring case is suited for any driving situation and offers high durability and protection from water and dust as well as easy handling. TRAX ADV also features strong carrying handles, a completely removable lid, glassreinforced plastic corner caps and a large chamfer on the lower edge to optimize lean angle and ground clearance for cornering. Proudly designed and made in Germany.

Needed for installation EVO carrier (p.26) Adapter kits (p.27) TRAX lock cylinder set (p.23)

Tip TRAX ADV complete kits with bike-specific carrier available.

New Adventure kits for selected touring motorcycles including TRAX ADV case system with top case, ALURACK, crash bars, engine guard and accessories. Applications: sw-motech.com


15

Protection from water and dust TRAX ADV has been constructed waterproof and dust tight. Therefore replaceable seals, robot welding, punch rivet technology and performance tests are employed. Embossed patterns reinforce the 1.5Â mm thick walls and create a unique look.

Impressive features, stunning value The completely removable deep-drawn lid with quick-release latches and restricting ropes provides high stability even when used as a seat. Stable aluminum handles allow easy mounting to the bike and carrying. Four robust tie-down points, integrated into the lid corners provide additional loading options.

Comfort in details Smart details like a membrane for easy opening after pressure and temperature changes or functional accessories like matched lock cylinder and key sets, accessory bags, bottle and canister kits or camping table guarantee pure adventure feeling.

Choose your own adventure TRAX ADV is suited for any driving situation – whether the rider takes his luggage off road, through the sloping curves of a relaxed road cruise or for a short trip to the city. The touring cases are mounted and secured within seconds to the removable EVO carrier. Optional adapter kits are available for various side racks produced by other manufacturers.


Luggage side cases / TRAX ADV

TRAX ADV M/L


17

TRAX ADV side cases are available in two sizes and two colours. Silver cases are anodized, black cases have a powder coated finish that provides excellent protection from oxidation and abrasion. TRAX ADV M (37 l): 49 x 23 x 37 cm / 5.1 kg TRAX ADV L (45 l): 49 x 28 x 37 cm / 5.5 kg

TRAX ADV M

37 l. Left.

ALK.00.733.11000L/B

TRAX ADV M

37 l. Left.

ALK.00.733.11000L/S

TRAX ADV M

37 l. Right.

ALK.00.733.11000R/B

TRAX ADV M

37 l. Right.

ALK.00.733.11000R/S

TRAX ADV L

45 l. Left.

ALK.00.733.10000L/B

TRAX ADV L

45 l. Left.

ALK.00.733.10000L/S

TRAX ADV L

45 l. Right.

ALK.00.733.10000R/B

TRAX ADV L

45 l. Right.

ALK.00.733.10000R/S

TRAX ADV top case

38 l

ALK.00.733.15000/B

TRAX ADV top case

38 l

ALK.00.733.15000/S

TRAX ADV top case

 p.32

TRAX accessories

 p.22

EVO carrier

 p.26

Adapter kits for EVO  side carrier

 p.27

TRAX ADV M/L


Luggage side cases / TRAX EVO

TRAX EVO - get off the beaten track TRAX EVO is the ultimate in durable, dependable luggage that handles dirt, asphalt and everything in between. Additional TRAX EVO accessories match the riders needs perfectly.

Needed for installation EVO carrier (p.26) Adapter kits (p.27) TRAX lock cylinder set (p.23)

Tip TRAX EVO complete kits with bike-specific carrier available. Applications: sw-motech.com


19

Gear up for venture A broad choice of accessories complements the product portfolio of the TRAX EVO line. Inner bags, bottle and canister kits or waterproof accessory bags for the cases lid are just a few examples.

Perfect fit Lockable latches secure TRAX EVO to EVO or other carrier systems and prevent theft. Easy and quick removal of the cases are ensured. Adapters are provided for various carrier systems from different producers.

Extend your limits TRAX EVO features chamfered case edges for maximum cornering clearance and optimal lean angle. Glass reinforced plastic corners offer extra protection on all outer corners of the case and help to distribute forces in case of impact.

Precision in lightweight construction With a weight of only 4.7 kg at a capacity of 45 l, TRAX EVO is the one of lightest available motorcycle aluminium cases. Super strong rivet technology provides tightness and creates a rugged design.


Luggage side cases / TRAX EVO

TRAX EVO M/L


21

TRAX EVO side cases are available in two sizes and two colours. Raw aluminium in silver or powder coated black finish that provides excellent protection from abrasion. TRAX EVO M (37 l): 49 x 23 x 37 cm / 4.4 kg TRAX EVO L (45 l): 49 x 28 x 37 cm / 4.7 kg

TRAX EVO M

37 l. Left.

ALK.00.165.11000L/B

TRAX EVO M

37 l. Left.

ALK.00.165.11000L/S

TRAX EVO M

37 l. Right.

ALK.00.165.11000R/B

TRAX EVO M

37 l. Right.

ALK.00.165.11000R/S

TRAX ADV L

45 l. Left.

ALK.00.165.10000L/B

TRAX ADV L

45 l. Left.

ALK.00.165.10000L/S

TRAX ADV L

45 l. Right.

ALK.00.165.10000R/B

TRAX ADV L

45 l. Right.

ALK.00.165.10000R/S

TRAX EVO top case

38 l

ALK.00.165.15000/B

TRAX EVO top case

38 l

ALK.00.165.15000/S

TRAX EVO top case

 p.34

TRAX accessories

 p.22

EVO  side carrier

 p.26

Adapter kits for EVO  side carrier

 p.27

TRAX EVO M/L


Luggage side cases / TRAX accessories

3

15

7

9

11

16


23

TRAX accessories TRAX 1 TRAX lock set

4 matching locks, 2 keys.

ALK.00.165.16402

2 TRAX lock set

6 matching locks, 2 keys.

ALK.00.165.16302

3 TRAX M/L inner bag

For TRAX side cases. Water-resistant. 33x48x18 (-22) cm. With volume expansion. Black.

4 TRAX M inner bag

For TRAX M side case. Waterproof. Black.

BCK.ALK.00.165.11000/B

5 TRAX L inner bag

For TRAX L side case. Waterproof. Black.

BCK.ALK.00.165.10000/B

6 TRAX M/L expansion bag

For TRAX/BMW/further side cases. 15 l. Waterproof. Black.

7 TRAX accessory mount

For TRAX side cases. Silver.

ALK.00.165.30900/S

8 TRAX bottle set 1

For TRAX accessory mount. Incl. 0.6 l bottle, mount.

ALK.00.165.30700/S

9 TRAX bottle set 2

For TRAX accessory mount. Incl. 2x 0.6 l bottle, mount.

ALK.00.165.30800/S

10 TRAX bottle

0.6 l. Stainless steel. Silver.

ALK.00.165.31000/S

11 TRAX canister set

For TRAX accessory mount. Incl. 2 l canister, mount.

ALK.00.165.31100/B

12 TRAX canister

2 l. Plastic. Black.

ALK.00.165.31200/B

BC.ALK.00.732.10000/B

BC.ALK.00.732.10700/B

TRAX ADV 13 TRAX ADV M lid net

For TRAX ADV M side case. Black.

BC.ALK.00.732.10400/B

14 TRAX ADV L lid net

For TRAX ADV L side case. Black.

BC.ALK.00.732.10500/B

15 TRAX ADV M/L inner lid bag

For TRAX ADV side cases. 5x19x40 cm. Black.

BC.ALK.00.732.10100/B

16 TRAX ADV M/L expansion bag

For TRAX ADV side cases. 15 l. Waterproof. Black.

BC.ALK.00.732.10201/B

TRAX EVO 17 TRAX EVO M/L carrying handle

For TRAX EVO side cases. Black.

BCK.ALK.00.165.116

18 TRAX EVO M/L expansion bag

For TRAX EVO side cases. 8-14 l. Water-resistant. Black.

BCK.ALK.00.165.117

19 TRAX EVO M/L globe sticker

For TRAX EVO side case. Water-resistant. Black.

WER.GIV.012.10000

20 TRAX EVO M/L globe sticker

For TRAX EVO side case. Water-resistant. Silver.

WER.GIV.013.10000

21 TRAX EVO reflective sticker set

For 2 TRAX EVO side cases or 1 top case. Reflective. Black.

ALK.00.165.30100/B

22 TRAX EVO reflective sticker set

For 2 TRAX EVO side cases or 1 top case. Reflective. Silver.

ALK.00.165.30100/S

TRAX ADV/EVO  Camping 23 TRAX ADV camping table plate

For TRAX ADV side cases. Aluminium.

ALK.00.732.10000

24 TRAX ADV camping table legs

For TRAX ADV camping table plate. Aluminium.

ALK.00.732.10100

25 TRAX EVO camping table plate

For TRAX EVO side cases. Aluminium.

ALK.00.165.30500/S

26 TRAX EVO camping table legs

For TRAX EVO camping table plate. Aluminium.

ALK.00.165.30600/S


Luggage side cases

AERO ABS side case AERO ABS side cases are made from ABS plastic and laminated polyester. Aerodynamic style, light weight construction and sportive features are perfect for sports, naked and touring bikes alike. Designed to fit EVO carrier. Needed for installation EVO carrier (p.26) Adapter kits (p.27)

Tip AERO ABS side case system with bike-specific carrier available. Applications: sw-motech.com


25

Features · 25 l capacity per case · Solid & lightweight 2.5 mm thick ABS shell laminated with 600D MBD polyester · Integrated retension strap · Integrated locking system for EVO carrier

Integrated locking system for EVO carrier

· Lockable zippers · Retractable carrying handle · Retroreflective details

AERO ABS side case set

BC.HTA.00.675.11000/B

· 24 x 38 x 54 cm / 2 x 1,900 g AERO ABS side case system (carrier & adapters incl.)

Included · 2 AERO ABS side cases

Applications

sw-motech.com

· 2 AERO Drybags (waterproof inner bags) · 2 zipper padlocks

EVO carrier

 p.26

Adapter kits for EVO side carrier

 p.27


Luggage side carrier

The flexible carrier system EVO carriers are known for easy handling, perfect fit and maximum flexibility. The patented QUICK-LOCK system is designed to remove the racks from the bike within seconds without special tools by opening the quick release fasteners. Only the small mounting tabs remain visible on either side of the bike. Separately sold adapter kits for SW-MOTECH or other current touring cases guarantee safe mount to EVO carriers.

90°

QUICK-LOCK


27

EVO carrier Features

Tip

· Attaches and detaches from the bike in seconds due to QUICK-LOCK function

Add more storage space: combination of EVO carrier and ALU-RACK, adapter kit and top case

· Customized design · Robust tubular steel construction, black powder coated

EVO  side carrier

· Optional available key locks to lock the carrier to the bike

Applications

sw-motech.com

· Compatible with various touring cases

Adapter kits for EVO carrier Adapter kits for EVO carrier

Adapter kit for Monokey case system

2 pcs. For TRAX ADV/EVO cases.

KFT.00.152.200

2 pcs. For AERO ABS side cases.

KFT.00.152.22500/B

2 pcs. For Givi/Kappa Monokey cases.

KFT.00.152.205

2 pcs. For Givi Trekker, not Outback cases.

KFT.00.152.20500/B

2 pcs. For Hepco & Becker plastic cases.

KFT.00.152.210

2 pcs. For Shad cases.

KFT.00.152.215

2 pcs. For Krauser, not K-Wing cases.

KFT.00.152.220

Anti-theft protection for EVO carrier > QUICK-LOCK function. 2 matching locks, 2 keys.

QLS.00.046.10100/B

Tool box for EVO carrier > Incl. mounting kit. Black.

KFT.00.152.30100/B

Cover caps for EVO carrier > 10 pcs. Covers mounting points. Black.

KFT.00.152.30000/B

QUICK-LOCK replacement part > 1 pc. For EVO carrier. QUICK-LOCK function. Incl. retention washer.

CAM.00.KFT

Screw set for EVO carrier > 8 pcs. QUICK-LOCK replacement. Incl. spacers.Permanent mounting.

KFT.00.152.30200/S

EVO carriers are compatible with touring cases from SW-MOTECH or other manufacturers. The required adapter kits for almost all common case systems are sold separately. The carrier features prepared mounting points for easy and fast installation of the mostly small mounting kits.

EVO carrier accessories

Tool box for EVO carrier


Luggage saddlebags

BLAZE saddlebag set Blaze offers an innovative way to mount soft saddlebags on sportive motorcycles. The system features mounting arms that quickly attach to the motorcycle and then slip into channels placed on the backside of each bag. These support arms prevent side-to-side movement, stabilize the bags and prevent potential contact with the rear tire or exhaust. The mounting arms detach quickly to retain the look of the motorcycle when the bags are removed. Features · Removable support arm · Expanding zipper that adds more volume · Reflective trim enhances visibility · Main compartment with top loading function · Zippered outside pocket · Solid carrying handle · Durable 1680D ballistic nylon material · 14-21 l / 14 x 30 x 44 cm / 1,200 g per bag

Included 2 BLAZE saddlebags, 2 waterproof inner bags, bike-specific mounting hardware including support arm BLAZE saddlebag set Applications

sw-motech.com


29

A wide VelcroÂŽ backed strap attaches over the seat, connects the two bags together and provides additional support, stability and distributes the bags weight.

The bike-specific support arms with additional quick release safety straps prevent side-to-side movement even while riding at higher speeds.

When the panniers are not needed, the support arms can be removed in seconds, only the barely visible mounting brackets left in place.


Luggage saddlebags

DAKAR panniers DAKAR panniers are built to survive in the roughest conditions. The 2-layer system of the bag combines a tough exterior outer layer with a waterproof inner layer to create a super-durable dry bag. Available as bike-specific version with panniers or as universal version with straps to mount on most current luggage carrier systems.

Features ·  Velcro® flap for passenger seat for extra support ·  Preformed interior ABS honeycomb panel for a rigid form close to the bike ·  Waterproof removable inner bag and roll–top closure ·  1680D ballistic nylon with reinforced ABS material ·  32 l / 25 x 35 x 45 cm / 1,600 g per bag


31

Bike-specific edition

Universal edition

The bike-specific pannier racks are made from tubular steel and guarantee secure mounting and stability while remaining close to the bike. To fit DAKAR, simply slide on to the pannier rack and click into place.

DAKAR can be used on various carrier systems due to D-rings on the outer corners for strap fastening.

Included · 2 DAKAR saddlebags with D-rings

Included · 2 DAKAR saddlebags with quick release fasteners · 2 waterproof inner bags

· 2 waterproof inner bags · 8 tie-down straps

· 2 bike-specific subframes DAKAR saddlebag set (bike-specific) Applications

DAKAR saddlebag set (universal) sw-motech.com

BC.HTA.00.741.11000/B


Luggage top cases

TRAX ADV top case TRAX ADV is premium luggage for any adventure regardless of your environment. The top cases of the TRAX ADV line feature the same quality characteristics as TRAX ADV side cases: stability, tightness and easy handling. The 38 l top case is lockable, fits one full face helmet and is the perfect upgrade to TRAX ADV side cases. Individual accessories are available to customize your adventure.


33

Adapter plate

ALU-RACK

Features

Mounting

· Premium top case made from 1.5 mm strong aluminium

The heavy-duty TRAX adapter plate provides a secure connection to mount TRAX ADV top case to any bike-specific ALU-RACK. Lockable top case latches ensure extra support. Adapter kits for luggage racks of different brands are also available.

· Lid with full gasket, lid restricting rope, stainless steel latches, solid grab handles and incorporated tie-down points · Water- and dustproof due to robot welding and punch riveting

ALU-RACK

 p.38

· Embossed design and welded seams for high strength

STEEL-RACK

 p.42

· Powder coated black finish or silver anodized finish against corrosion and abrasion

Applications

sw-motech.com

· 38 l / 41 x 34 x 33 cm / 4.7 kg

Adapter plate for ALU-RACK

GPT.00.152.400

 p.39

Adapter kit for STEEL-RACK

GPT.00.152.20101/B

 p.43

Adapter plate for tubular racks

GPB.00.152.165

 p.45

· Glass reinforced plastic corners for extra protection

TRAX  ADV top case

ALK.00.733.15000/B

TRAX  ADV top case

ALK.00.733.15000/S

More TRAX  ADV information

 p.14

Complete solution TRAX ADV top case system includes everything to travel with TRAX ADV top case: top case, bike-specific ALU-RACK, adapter plate and TRAX lock set. TRAX ADV top case system Applications

sw-motech.com


Luggage top cases

TRAX EVO top case TRAX EVO top cases are durable, lightweight, attractively priced and compatible with ALU-RACK, STEEL-RACK or other luggage racks due to adapter kits.

Features · Top case made from 1.5 mm strong aluminium with stainless steel latch · High tightness due to punch riveting · Glass reinforced plastic corners for extra protection · Available with raw aluminium finish or powder coated black finish against aluminium abrasion · 38 l / 41 x 34 x 33 cm / 4.5 kg

Needed for installation ALU-RACK (p.38) STEEL-RACK (p.42) TRAX lock set (p.35) TRAX EVO top case

ALK.00.165.15000/B

TRAX EVO top case

ALK.00.165.15000/S

More TRAX EVO information

 p.18


35

TRAX top case accessories TRAX TRAX lock set

6 matching locks, 2 keys.

ALK.00.165.16302

TRAX lock set

2 matching locks, 2 keys.

ALK.00.165.16502

TRAX top case inner bag

For TRAX top case. Water-resistant. Black.

TRAX top case inner bag

For TRAX top case. Waterproof. Black.

BC.ALK.00.732.10300/B BCK.ALK.00.165.15000/B

TRAX ADV TRAX ADV top case passenger backrest

For TRAX ADV top case. Black.

ALK.00.732.10200/B

TRAX ADV top case lid net

For TRAX ADV top case. Black.

BC.ALK.00.732.10600/B

TRAX EVO top case passenger backrest

For TRAX EVO top case. Black.

ALK.00.165.30000/B

TRAX EVO reflective sticker set

For 2 TRAX EVO side cases or 1 top case. Reflective. Black.

ALK.00.165.30100/B

TRAX EVO reflective sticker set

For 2 TRAX EVO side cases or 1 top case. Reflective. Silver.

ALK.00.165.30100/S

TRAX EVO


Luggage top cases

T-RaY top case T-RaY top cases provide reliable storage for reasonable prices. The splashproof and lockable T-RaY top cases are available in four sizes and fit one or two helmets. The robust plastic hard cases fit STEEL-RACKs and most luggage racks with an included adapter plate. A separately sold adapter plate allows safe mounting to ALU-RACKs.

Features · Splashproof sealing · Integrated locking system · Push button for easy opening · Easy to clean surface · Sizes L and XL with custom-molded inner liner · Weight: 4,080 – 7,000 g Included · T-RaY top case · Universal adapter plate for STEEL-RACK and standard luggage racks · 2 keys STEEL-RACK

 p.42

ALU-RACK

 p.38

Applications

sw-motech.com


37

T-RaY top cases T-RaY top case Basic

(28 l) fits 1 helmet.

TCM.00.760.10000/B

T-RaY top case M

(36 l) fits 1 helmet.

TCM.00.762.10200/B

T-RaY top case L

(48 l) fits 2 helmets.

TCM.00.763.10000/B

T-RaY top case XL

(50 l) fits 2 helmets.

TCM.00.764.10000/B

T-RaY top case passenger backrest

For T-RaY top case Basic. Black.

TCM.00.762.20200/B

T-RaY top case passenger backrest

For T-RaY top case M/L/XL. Black.

TCM.00.763.20200/B

T-RaY inner liner

For T-RaY top case M. Black.

TCM.00.762.20000/B

Adapter plate for ALU-RACK

For T-RaY top cases Basic/M. QUICK-LOCK function. Black.

GPT.00.152.46000/B

Adapter plate for ALU-RACK

For T-RaY top cases L/XL. QUICK-LOCK function. Black.

GPT.00.152.46100/B

T-RaY top case accessories

T-RaY top case adapter plates


Luggage luggage racks

Ducati Multistrada 1200 Enduro

ALU-RACK The clean looking ALU-RACK allows quick release fitment of SW-MOTECH top cases or other luggage brands due to individual adapter plates. The versatile aluminium rear rack features the QUICK-LOCK system: three quick fasteners making installation and removal superfast and easy. Slots for fastening straps secure luggage directly on the ALU-RACK or with the optional available luggage rack extension to enlarge the rack's surface area.

Features · Bike-specific design · Produced with high-precision CNC technology for best fit · Constructed from high-strength aluminium · Black or silver powder coating for durable protection against corrosion · Compatible to EVO carrier and TRAX side cases

Tip Luggage rack extension for ALU-RACK (p.41) EVO tank ring for ALU-RACK to attach tank bags (p.40)

ALU-RACK Applications

sw-motech.com


39

Yamaha Tracer 900

Adapter plates for SW-MOTECH top cases 01 For TRAX top case. QUICK-LOCK function. Black.

01

04

03

GPT.00.152.400

02 For T-RaY top cases Basic/M. QUICK-LOCK function. Black.

GPT.00.152.46000/B

03 For T-RaY top cases L/XL. QUICK-LOCK function. Black.

GPT.00.152.46100/B

Adapter plates for assorted top cases 04 For Givi/Kappa Monokey. QUICK-LOCK function. Black.

GPT.00.152.405

05 For Givi/Kappa Monolock. QUICK-LOCK function. Black.

GPT.00.152.406

06 For Hepco & Becker. QUICK-LOCK function. Black.

GPT.00.152.410

07 For Shad, not SH29/SH39/SH48/SH50. QUICK-LOCK function. Black.

GPT.00.152.415

08 For Krauser. QUICK-LOCK function. Black.

GPT.00.152.420

09 Base plate. Without mount for top case. QUICK-LOCK function. Black.

GPT.00.152.450

05

Accessories for ALU-RACK 10 QUICK-LOCK replacement part 11 Cover cap for ALU-RACK

CAM.00.GPT GPT.00.152.47000/B


Luggage luggage racks

BMW R1200 R

EVO tank ring for ALU-RACK The EVO tank ring adapter allows all EVO tank bags with a level base to be placed on ALU-RACKs. Safe support guaranteed once the adapter is snapped into place and locked with one quarter quick release turn.

Tip Recommended EVO tank bags: Micro, Daypack, Sport EVO tank ring for ALU-RACK

TRT.00.640.20400/B

ALU-RACK

 p.38

EVO tank bags

 p.46


41

BMW R1200 R

Luggage rack extension for ALU-RACK The luggage rack extension fits any ALU-RACK and is an essential accessory to fix luggage firmly and securely. A number of slots to pull through fastening straps allow various possibilities. The black powder coated aluminium extension can be attached and removed from the ALU-RACK by turning three quarter-turn quick lock fasteners. Tip Tail bag Rackpack was designed for best fit on luggage rack extension for ALU-RACK (p.41). Luggage rack extension for ALU-RACK

GPT.00.152.43001/B

ALU-RACK

 p.38

Tail bags

 p.66


Luggage luggage racks

Triumph Tiger 1050 Sport

STEEL-RACK STEEL-RACKs offer maximum durability and stability. The reasonable rear luggage rack serves as an excellent base for adding top cases or EVO tank bags. Various slots to pull through fastening straps allow ultimate flexibility.

Tip TRAX ADV top case (p.32) TRAX EVO top case (p.34) Tail bags (p.66)

Features 路 Bike-specific design for best fit 路 Laser cut design offers multiple tie-down points 路 Allows fitment of top cases or tank bags 路 High strength steel construction, black powder coated finish

EVO tank ring for STEEL-RACK and SEAT-RACK. (p.43)

STEEL-RACK Applications

sw-motech.com


43

Ducati Hyperstrada 939

Adapter kits for STEEL-RACK Separately sold adapter kits guarantee secure mount of SW-MOTECH or Givi top cases to STEEL-RACKs, the EVO tank ring for STEEL-RACK is designed to fit EVO tank bags to STEEL-RACKs.

Adapter kits for SW-MOTECH products For TRAX top case.

GPT.00.152.20101/B

EVO tank ring for STEEL-RACK and SEAT-RACK.

TRT.00.640.20200/B

Adapter for assorted top cases Easy fitting of TRAX top case due to adapter kit

For Givi Monolock.

GPT.00.152.20300/B

For Givi Monokey.

GPT.00.152.20400/B


Luggage luggage racks

KTM 1290 Super Duke GT

SEAT-RACK The SEAT-RACK replaces and uses the same locking mechanism as the passenger seat. Specially designed for sportive bikes to create storage place and for touring bikes to add space. Installation is as easy as removing the passenger seat and clicking the SEAT-RACK in its place. Features · Tie-down slots for soft luggage · Fits EVO tank bags (see tip) · Foam seals keep moisture and dirt out of the underside of the SEAT-RACK · 4 mm black powder coated aluminium finish

Honda CRF 1000 L Africa Twin

Tip EVO tank ring for STEEL-RACK and SEAT-RACK. (p.43) (TRT.00.640.20200/B) EVO tank bags (from p.46) Tail bags (from p.66) ROK ™ straps (p.74) SEAT-RACK Applications

sw-motech.com


45

BMW R 1200 GS Adventure

Adapter plate for tubular racks Designed to add TRAX top cases to most existing tubular steel flat rear luggage racks. The universal adapter plate is made from solid steel and features quick lock fasteners for easy and fast fitment of the top cases. Tip Adapter kits for TRAX top cases are already included TRAX ADV top case (p.32) TRAX EVO top case (p.34)

Adapter plate for tubular racks (universal)

GPB.00.152.165


Luggage tank bags / EVO series

05

04

07

11

11

09 06

10

04 03

05

EVO tank bags The premium tank bag line EVO features extra-durable materials with smart details to create bags that fit perfectly on a variety of motorcycles. Resilient 1680 D ballistic nylon material ensures uncompromising durability of all EVO tank bags. EVO and waterproof Yukon 90 tank bags are designed to use with EVO tank rings. Once the tank ring is installed, attaching and removing of the tank bag is super fast and easy.


47

Overview tank bags for EVO tank ring

Material

EVO Micro

EVO Daypack

EVO Engage

EVO City

EVO Sport

EVO Trial

EVO GS

Yukon 90

2,5-5 l

5-9 l

7l

11-15 l

14-21 l

15-22 l

16-22 l

9l

1680D ballistic nylon material

1680D ballistic nylon material

1680D ballistic nylon material

1680D ballistic nylon material

1680D ballistic nylon material

1680D ballistic nylon material

1680D ballistic nylon material

PES/PVC

Features

P

P

P

P

P

P

P

P

02 Water protection

water-resistant

water-resistant

water-resistant

water-resistant

water-resistant

water-resistant

water-resistant

waterproof

03 Volume expansion

P P

P P

P

P P

P P

P P

P P

P

1

2

2

2

2

2

2

0

P P

P P

P

P P

P P P

P P P

P P

09 Outer pockets

0

0

2

3

2

2

3

0

10 Inner storage organizer

Lid mesh compartment

P

P

P

P

P

P

P

P

P P P

P P P

P P P

P P P

P P P

P P P

P P

P P P

P P P

P P P

P P P

P P P

P P P

P

48

49

50

51

52

53

54

55

01 EVA base

04 Retroreflective details 05 Cable ports 06 Carrying handle 07 Zipper garage 08 Integrated map holder

P

Accessories 11 GPS mount 12 Drybag or map holder 13 Anti-theft protection Included 14 Shoulder strap 15 Rain cover 16 EVO top ring Page

Features of all EVO tank bags · Patented tank ring with QUICK-LOCK function

· Flexible storage organizer

· Pull cord with snap fastener to release quick lock mechanism

· Individual top ring positioning for perfect fit

· Reflective trim enhances visibility

· Also available: EVO electric tank bags (not Yukon 90)


Luggage tank bags / EVO series

EVO Micro The smallest EVO tank bag Micro is the perfect solution for short trips and designed to store smaller items. Micro fits almost all fuel tanks. Like all EVO tank bags, the compact Micro features a EVA plastic base that guarantees high form stability. Features · Lid mesh compartment · Volume expansion with zipper garage · 1 cable port · Solid carrying handle · Made from 1680D ballistic nylon material, EVA base · 2.5-5 l / 21 x 11 x 27 cm / 870 g · All features, included items and accessories are listed on p.47

EVO Micro tank bag

BC.TRS.00.110.20001

EVO Micro electric tank bag

BC.TRE.00.110.20000

EVO tank ring Applications

 p.56 sw-motech.com


49

EVO Daypack The Daypack is a universal fit tank bag that offers up to 9 l storage space and several extras. The Daypack is the ideal solution for every day driving trips. Features · Inner storage organizer with mesh compartments · Volume expansion with zipper garage · 2 cable ports · Solid carrying handle and shoulder strap · Compatible with GPS mount, map holder, smartphone or tablet Drybag · Made from 1680D ballistic nylon material, EVA base · 5-9 l / 21 x 15 x 30 cm / 1,050 g · All features, included items and accessories are listed on p.47

EVO Daypack tank bag

BC.TRS.00.108.20001

EVO Daypack electric tank bag

BC.TRE.00.108.20000

EVO tank ring Applications

 p.56 sw-motech.com


Luggage tank bags / EVO series

EVO Engage Tank bag EVO Engage is made for curved fuel tanks and offers individual storage organization. The interior of the tank bag can be separated by a flexible divider, two outer compartments provide additional storage space. Features · Flexible inner storage organizer with mesh compartments · 2 outer pockets · 2 cable ports · Solid carrying handle and shoulder strap · Compatible with GPS mount, map holder, smartphone or tablet Drybag · Made from 1680D ballistic nylon material, EVA base · 7 l / 27 x 13 x 36 cm / 1,900 g · All features, included items and accessories are listed on p.47

EVO Engage tank bag

BC.TRS.00.107.20001

EVO Engage electric tank bag

BC.TRE.00.107.20000

EVO tank ring Applications

 p.56 sw-motech.com


51

EVO City The EVO City tank bag fits perfectly to steeply sloped fuel tanks and comes with a narrow front to improve the handlebar clearance. Features · Inner storage organizer with mesh compartments · 3 outer pockets · Volume expansion with zipper garage · 2 cable ports · Solid carrying handle and shoulder strap · Compatible with GPS mount, map holder, smartphone or tablet Drybag · Made from 1680D ballistic nylon material, EVA base · 11-15 l / 28 x 20 x 36 cm/ 1,550 g · All features, included items and accessories are listed on p.47

EVO City tank bag

BC.TRS.00.104.20001

EVO City electric tank bag

BC.TRE.00.104.20000

EVO tank ring Applications

 p.56 sw-motech.com


Luggage tank bags / EVO series

EVO Sport The main characteristic of the EVO sport is its striking design. This tank bag is perfect for sport and super sports motorcycles with long flat tanks and features an individual storage organizer for 14-21 l storage space.

Features · Integrated map holder, touch compatible · Inner storage organizer with mesh compartments, Velcro® pockets and pockets for pens · 2 outer pockets · Volume expansion with zipper garage · 2 cable ports · Solid carrying handle and shoulder strap · Compatible with GPS mount, map holder, smartphone or tablet Drybag · Made from 1680D ballistic nylon material, EVA base · 14-21 l / 34 x 17 x 40 cm / 1,700 g · All features, included items and accessories are listed on p.47

EVO Sport tank bag

BC.TRS.00.101.20001

EVO Sport electric tank bag

BC.TRE.00.101.20000

EVO tank ring Applications

 p.56 sw-motech.com


53

EVO Trial The EVO Trial is the perfect touring tank bag for long tours. Developed for motorcycles with slightly curved fuel tanks and very useful features such as volume expansion for up to 22 l storage space and integrated touch compatible map holder for electric device use. Features · Integrated map holder · Inner storage organizer with mesh compartments, Velcro® pockets and pockets for pens · 2 outer pockets · Volume expansion with zipper garage · 2 cable ports · Solid carrying handle and shoulder strap · Compatible with GPS mount, map holder, smartphone or tablet Drybag · Made from 1680D ballistic nylon material, EVA base · 15-22 l / 33 x 19 x 38 cm / 1,700 g · > All features, included items and accessories are listed on p.47

EVO Trial tank bag

BC.TRS.00.102.20001

EVO Trial electric tank bag

BC.TRE.00.102.20000

EVO tank ring Applications

 p.56 sw-motech.com


Luggage tank bags / EVO series

EVO GS The EVO GS is the ideal tank bag for long tours and fits perfectly to fuel tanks that have a steeply sloping form. The EVO GS carries up to 22 l when fully expanded and is compatible with GPS mount, map holder, smartphone or tablet Drybag. Features · Inner storage organizer with mesh compartments · 3 outer pockets · Volume expansion with zipper garage · 2 cable ports · Solid carrying handle and shoulder strap · Compatible with GPS mount, map holder, smartphone or tablet Drybag · Made from 1680D ballistic nylon material, EVA base · 16-22 l / 25 x 31 x 41 cm / 1,930 g · All features, included items and accessories are listed on p.47

EVO GS tank bag

BC.TRS.00.103.20001

EVO GS electric tank bag

BC.TRE.00.103.20000

EVO tank ring Applications

 p.56 sw-motech.com


55

Yukon 90 Yukon 90 is the first waterproof tank bag with QUICKLOCK function. The weather and dirt resistant tank bag has been designed with the needs of all season, all terrain driving in mind. It can easily be attached to any EVO tank ring, providing secure mounting and easy unlatching at the same time. Features · Robust material, welded seams, waterproof zipper · Top flap serves as map holder · Removable inner storage organizer with mesh compartments and flexible divider · Also available in bright yellow colouring · Made from waterproof and easy to clean polyester material with PVC coating · 9 l / 19 x 16 x 29 cm / 900 g · All features, included items and accessories are listed on p.47

Yukon 90 tank bag

BC.WPB.00.012.20000

Yukon 90 tank bag

BC.WPB.00.012.20000/Y

EVO tank ring Applications

 p.56 sw-motech.com


Luggage tank ring / EVO series

EVO tank ring QUICK-LOCK stands for highest quality, durability and innovation. According to these criteria, the EVO tank ring was developed. The patented EVO tank ring is made from fiberglass reinforced polyamide for maximum stability and features a bike-specific design for best fit. Once mounted on the gas cap, it allows easy attaching and removal of all EVO tank bags.

Features · Bike-specific design for best fit and customized solutions · Simple installation · Easy removed for gas fill ups · Included mounting hardware · Made from fiberglass reinforced polyamide

Tip

EVO tank ring

EVO electric tank bags already include the electric kit for the EVO tank ring. EVO electric top ring and electric kit are also available separately.

Tank bags for EVO tank ring

 p.46

Electric tank bags for EVO tank ring

 p.46

Applications

sw-motech.com


57

EVO tank ring variety The EVO tank ring system is currently available for more than 460 motorcycles including customized adapter kits for replacing original parts if the gas cap has no visible screws. The complete mounting hardware is always included in delivery.

Customized solutions The EVO tank ring system is also available for selected models with tanks that have different placed gas caps. For Honda, Yamaha and BMW models, like BMW F 700 GS, the tank ring system features a customized base.

Perfect positioning of EVO top ring All EVO and Yukon 90 tank bags include the EVO top ring that attaches to the tank bags stable EVA base and connects with the EVO tank ring. Individual positioning of the top ring guarantees best fit for the riders needs and ideal positioning on the fuel tank.


Luggage tank bags / ION series

ION tank bags ION tank bags represent the entry level class of high-quality tank bags with QUICK-LOCK function or classic strap mounting and fit perfectly on most fuel tanks. The ION tank bag line is ideal for budget minded riders with high standards.

Features of all ION tank bags · Compatible with ION tank ring · Individual positioning of ION top ring for best fit · Pull cord with snap fastener to release quick lock mechanism · Integrated map holder, compatible with electronic device touch displays · Retroreflective details · Zippered volume expansion · 1 cable port · Inner mesh compartments · Carrying handle · Made from 600D polyester material with stable EVA base ION tank ring

 p.61

Applications

sw-motech.com

Accessories

 p.64


59

ION one The smallest ION one tank bag with up to 9 l storage space is the perfect solution for short trips and designed to store smaller items. ION one fits almost all fuel tanks. Features · Included: tank bag, ION top ring, rain cover · 5-9 l / 21 x 15 x 30 cm / 660 g ION one ION  tank ring Applications

BC.TRS.00.201.10000  p.61 sw-motech.com

ION two The ION two tank bag offers generous space for longer trips and fits perfectly on flat fuel tanks. The ION two features an integrated map holder that works with all electronic device touch displays. Features · Compatible with map holder, smartphone or tablet Drybag · Included: tank bag, ION top ring, rain cover, shoulder strap · 13-20 l / 26 x 17 x 38 cm / 980 g

ION two ION  tank ring Applications

BC.TRS.00.202.10000  p.61 sw-motech.com


Luggage tank bags / ION series

ION three Tank bag ION three was developed for slightly curved tanks and offers up to 22 l storage space for long tours. Features · 2 outer pockets · Compatible with map holder, smartphone or tablet Drybag · Included: tank bag, ION top ring, rain cover, shoulder strap · 15-22 l / 33 x 19 x 38 cm / 1,300 g ION three ION  tank ring Applications

BC.TRS.00.203.10000  p.61 sw-motech.com


61

ION tank ring The bike-specific developed ION tank ring system works with ION tank bags and guarantees a secure and reliable connection between tank bag and tank ring. Once the system is assembled, the tank bag can be snapped securely into place or removed by pulling a release lanyard at the front of the tank bag.

Features · Simply mounted to original gas cap · Easy removed for gas fill ups · Included mounting hardware · Made from fiberglass reinforced polyamide ION  tank ring ION tank bags Applications

 p.58 sw-motech.com


Luggage strap tank bags

Strap tank bag features · Three point strap mounting with snap buckles

· Carrying handle, cable port (not Yukon 130)

· Circumferential zipper connects tank bag to base

· Tank friendly bottom

panel

· Included: strap tank bag, fitting straps, waterproof inner bag

· Integrated map holder, compatible with electronic

device touch displays · Zippered volume expansion, retroreflective details

EVO Enduro Strap tank bag Enduro fits any adventure bike with sloped tank form. Features · 3 outer pockets · Compatible with GPS mount, map holder, smartphone

or tablet Drybag · Made from 1680D ballistic nylon material · 13-22 l / 33 x 23 x 36 cm / 1,280 g EVO Enduro strap tank bag

EVO Enduro

BC.TRS.00.130.10000

LT

The Enduro LT is the ‘lite’ version of strap tank bag EVO Enduro and fits almost any tank. Features · Compatible with GPS mount · Made from 1680D ballistic nylon material · 5-7.5 l / 21 x 17 x 21 cm / 760 g EVO Enduro LT strap tank bag

BC.TRS.00.131.10000

(not Yukon 130) Applications

sw-motech.com


63

ION four Strap tank bag ION four fits any adventure bike with sloped tank form and uses safe three point strap mounting. Features · 2 outer pockets · Compatible with map holder, smartphone or tablet

Drybag · Made from 600D polyester material · 13-22 l / 33 x 23 x 36 cm / 960 g ION four strap tank bag

BC.TRS.00.204.10000

Yukon 130 Made from durable and waterproof polyester, the Yukon 130 is built for all weather. Features · 2 outer pockets · Compatible with map holder, smartphone or tablet

Drybag · Waterproof, made from polyester with PVC coating,

welded seams · 13-22 l / 33 x 23 x 36 cm / 1,340 g

Yukon 130 strap tank bag

BC.WPB.00.007.10001


Luggage tank bag accessories

Smartphone Drybag for tank bag The waterproof smartphone Drybag is compatible with all SW-MOTECH tank bags that feature D-rings and Velcro® straps. 90 x 170 mm inner size fits almost all smartphones. Smartphone Drybag for tank bag

BC.TRS.00.152.10000

Tablet Drybag for tank bag The tablet Drybag is designed with durable materials to provide high abrasion resistance, water resistance, durability, and the ability to withstand hot & cold temperatures. The tablet Drybag offers space for 9.7 inch displays. Tablet and smartphone Drybag can be used with the tank bag volume expansion. Tablet Drybag for tank bag

BC.TRS.00.151.10000

Map holder for tank bag The map holder easily fits most SW-MOTECH tank bags due to two strong buckles and Velcro® strap. The map holder is made from durable 1680D ballistic nylon material and fits even with volume expanded bags. The inner display size measures 9.5” x 10”. Map holder for tank bag

BC.TRS.00.150.10000


65

GPS mount for EVO tank bag Within seconds the GPS mount can be attached to EVO tank bags (not Micro and Yukon 90) without blocking the instrument view. The pivotable metal bracket is compatible to most GPS devices as well as Navi Case Pro. GPS mount for EVO tank bag Navi Case Pro

BCK.GPS.00.010.100  p.116

Anti-theft protection for EVO tank bag Double safety for your belongings: a security pin prevents releasing of the tank bag from the tank and a luggage cable lock secures the tank bags zipper against theft.

Anti-theft protection for EVO tank bag

TRT.00.640.20001


Luggage tail bags

Slipstream The option to be used as a backpack make the Slipstream a truly versatile companion for urban life, while the use of robust reinforced 1680D ballistic nylon material guarantees an always streamlined contour and safe fit to the passenger seat or carrier.

Features ·· Backpack shoulder straps ·· Retroreflective details ·· Zipper management ·· 2 outer pockets ·· 5 D-rings ·· Carrying handle ·· Reinforced 1680D ballistic nylon material ·· 13 l / 33 x 22 x 36 cm / 1,260 g

Included ·· Slipstream tail bag ·· Waterproof inner bag ·· 4 fitting straps ·· 4 bungee straps ·· 2 backpack shoulder straps ·· Adhesive protective foil

Slipstream tail bag Applications Soft luggage accessories Luggage racks

BC.HTA.00.307.10000 sw-motech.com  p.74  from p.38


67

Jetpack Just like the Slipstream, the Jetpack is tail bag and backpack at once. Its shoulder straps double as fitting straps for fastening soft luggage to the bike, the reinforced wall material offers best aerodynamics.

Features ·· Backpack shoulder straps ·· Retroreflective details ·· Volume expansion ·· Outer pocket ·· Zipper management ·· Solid carrying handle ·· Integrated flap to mount on ALU-RACK or STEEL-RACK ·· Reinforced 1680D ballistic nylon material ·· 20-33 l / 34 x 18 x 49 cm / 1,660 g

Included ·· Jetpack tail bag ·· Rain cover ·· 2 fitting straps ·· Adhesive protective foil

Jetpack tail bag Applications Soft luggage accessories Luggage racks

BC.HTA.00.303.10000 sw-motech.com  p.74  from p.38


Luggage tail bags

Rearbag The Rearbag can be attached to the passenger seat or rear rack of any sport, sport-touring or adventure-touring bike and doubles as a backpack. Perfect for a long weekend trip.

Features ·· Backpack shoulder straps ·· Retroreflective details ·· Volume expansion, fits one helmet ·· 2 outer pockets ·· Zipper management ·· 4 strong metal buckles and D-rings ·· Zippered lid mesh compartment ·· Carrying handle ·· Reinforced 1680D ballistic nylon material ·· 24-36 l / 35 x 25 x 45 cm / 1,760 g

Included ·· Rearbag tail bag ·· Waterproof inner bag ·· 4 fitting straps ·· 2 license plate straps ·· 2 backpack shoulder straps ·· Adhesive protective foil

Rearbag tail bag Applications Soft luggage accessories Luggage racks

BC.HTA.00.304.10000 sw-motech.com  p.74  from p.38


69

Rackpack The robust Rackpack has been made for use with luggage rack extension for ALU-RACK, but also can be attached to SEAT-RACK, standard racks, sissy bar or passenger seat.

Features ·· Retroreflective details ·· 2 volume expansions ·· 2 outer pockets ·· 4 strong metal buckles and 4 D-rings ·· Hook & loop sissy bar strap ideal for cruisers ·· Hook & loop under seat strap ideal for street ·· 36-45 l / 30 x 30 x 42 cm / 2,120 g

Included ·· Rackpack tail bag ·· Waterproof inner bag ·· 4 fitting straps ·· 4 Velcro® straps ·· Shoulder strap ·· Adhesive protective foil

Rackpack tail bag Applications Soft luggage accessories Luggage rack extension for ALU-RACK

BC.HTA.00.305.10000 sw-motech.com  p.74  from p.41


Luggage tail bags

Cargobag The Cargobag fits almost all sport, sport-touring and adventure-touring bikes and is suitable for long weekend trips. For more storage: exterior bungee tie-downs are included for versatile mounting options or optional Tentbag attachment.

Features ·· Retroreflective details ·· 2 outer pockets ·· Covered zippers and handle compartment ·· 4 strong metal buckles and 2 D-rings ·· 2 exterior bungee tie-downs ·· 1680D ballistic nylon material ·· 50 l / 70 x 45 x 40 cm / 1,600 g

Included ·· Cargobag tail bag ·· Waterproof inner bag ·· 4 fitting straps ·· 2 tie-down straps ·· 2 license plate straps ·· Adhesive protective foil

Cargobag tail bag Applications Tentbag Luggage racks

BC.HTA.00.306.10000 sw-motech.com  p.73  from p.38


71

Racepack Tail bag Racepack has been designed for sport and sport-touring bikes with a narrow tail section and no handrails. The self-supporting aluminium construction ensures form stability.

Features ·· Retroreflective details ·· Self-supporting aluminium construction ·· 2 outer pockets ·· Covered zippers ·· 4 strong metal buckles and 8 D-rings ·· Reinforced 1680D ballistic nylon material ·· 50-65 l / 70 x 30 x 30 cm / 3,040 g

Included ·· Racepack tail bag ·· Waterproof inner bag ·· 4 fitting straps ·· 2 tie-down straps ·· 2 license plate straps ·· Shoulder strap ·· Adhesive protective foil

Racepack tail bag Applications Soft luggage accessories Luggage racks

BC.HTA.00.302.10000 sw-motech.com  p.74  from p.38


Luggage tail bags

Speedpack 90 liters of maximum storage space make the Speedpack one of the largest motorcycle soft bags currently available. The generous tail bag made from shape retaining, reinforced ballistic nylon material fits various motorcycle types and comes with its own set of removable side bags.

Features ·· Retroreflective details ·· Self-supporting construction, compressible, fits 2 helmets ·· 4 outer pockets ·· 2 detachable side bags, attached with strong Velcro® straps ·· Covered zippers ·· 4 strong metal buckles and D-rings ·· Reinforced 1680D ballistic nylon material ·· 75-90 l / 75 x 60 x 32 cm / 5,140 g

Included ·· Speedpack tail bag ·· 2 side bags ·· 3 waterproof inner bags ·· 4 fitting straps ·· 2 tie-down straps ·· 2 license plate straps ·· Shoulder strap ·· Adhesive protective foil

Speedpack tail bags Applications Soft luggage accessories Luggage racks

BC.HTA.00.301.10000 sw-motech.com  p.74  from p.38


73

Tentbag The Tentbag brings additional storage space to the top of your tail bag: it can hold a 2 person tent and can easily be attached to Speedpack, Racepack, Cargobag and other tail bags.

Features ·· Can easily be attached to tail bag compression straps ·· Retroreflective details ·· Long covered zipper ·· 2 integrated carrying handles ·· 4 strong metal D-rings ·· 1680D ballistic nylon material ·· 22 l / 60 x 20 cm / 360 g

Tentbag tail bag ROK ™ straps

BC.HTA.00.350.10000  p.74


Luggage soft luggage accessories

ROK™ straps With superior design qualities, ROK™ straps are very strong, long-lasting and above all else, safe! These straps are easy to use, hold cargo under constant tension, and have no dangerous hooks that can cause scratches. The loops on both ends can be secured to just about anything and the mid-strap buckle can be quickly adjusted as needed. ROK ™ straps

2x 310-1,060 mm.

BC.ROK.00.711.10000/B

ROK ™ straps

2x 500-1,500 mm.

BC.ROK.00.711.10100/B

Motorcycle luggage lock The luggage lock is ideal for securing contents of any luggage with compatible zipper pulls. Simply pull through any compatible zipper pulls and engage the lock. Compatible with all SW-MOTECH tail bags. Motorcycle luggage lock

BC.LOC.00.001.10000/B

Motorcycle luggage cable lock Ideal for securing both bag and bag contents to the bike. Simply loop the combination end around the frame of the bike, through the loop on the other end of the cable and attach it to the bags zipper pulls and/or D-rings. Compatible with all SW-MOTECH tank bags and tail bags.

Motorcycle luggage cable lock (50 cm)

BC.LOC.00.002.10000/B

Motorcycle luggage cable lock (100 cm)

BC.LOC.00.003.10000/B


motorradreisender.de


Luggage waterproof line

Drybag 80 Maybe our most versatile piece of luggage, the waterproof Drybag 80 can be used as tank bag, tail bag, shoulder bag or mounted to crash bars or Drybag 700. Features ·· Waterproof roll closure ·· Including 1 steering head strap, 2 loop straps and 1 shoulder strap ·· 500D polyester material with PVC coating ·· 8 l / 19 x 9 x 35 cm / 500 g Drybag 80 tail bag

BC.WPB.00.010.10001

Drybag 180 tail bag

BC.WPB.00.018.10000

Drybag 260 tail bag

BC.WPB.00.020.10000

Drypack storage bag

BC.WPB.00.016.10000

Drypack storage bag set

BC.WPB.00.017.10000

Drybag 180/260 This super lightweight and waterproof tail or carrying bag is designed for true convenience and available in two sizes. Usable with luggage rack, passenger seat or in combination with other Drybags. Features ·· Waterproof bag with roll closure ·· Secure 4 point mounting, integrated front pocket ·· Fastening system for other Drybags ·· Including 4 loop straps and 1 shoulder strap ·· 500D polyester material with PVC coating ·· Drybag 180: 18 l / 39 x 25 x 18 cm / 900 g ·· Drybag 260: 26 l / 50 x 26 x 26 cm / 1,200 g

Drypack storage bags Protect your gear from the elements with waterproof Drypack storage bags. Great to store them in existing luggage cases or mounted independently. Features ·· Waterproof roll closure ·· Bottom fastening flap ·· 210D/250D polyester material with PVC coating ·· 20 l or as set with 4, 8 and 13 l


77

Drybag 250/450 The two end-roll Drybags 250 and 450 offer reliable protection from water and dirt at a competitive price. Like all Drybag tail bags, the soft luggage with 25 respectively 45 liters capacity are made from easy to clean polyester material with PVC coating. Retroreflective details improve visibility in traffic.

Features ·· End-roll closure ·· Retroreflective details ·· 4 point strap fastening system ·· Carrying handle ·· Fastening system for other Drybags ·· Including 4 loop straps ·· 500D polyester material with PVC coating ·· Drybag 250: 25 l / 55 x 26 x 26 cm / 700 g ·· Drybag 450: 45 l / 55 x 33 x 33 cm / 850 g

Drybag 250 tail bag

BC.WPB.00.008.10000

Soft luggage accessories

Drybag 450 tail bag

BC.WPB.00.009.10000

Luggage racks

 p.70  from p.38


Luggage waterproof line

Drybag 350/600 Drybags 350 and 600 can be used as tail or carrying bags and offer wearing comfort as well as spacious water and dust proof storage space. The robust bags are easy to clean and can easily be combined with other Drybag tail bags.

Features ·· Roll-top closure ·· Retroreflective details ·· 4 point strap fastening system ·· Comfortable carrying handles ·· Fastening system for other Drybags ·· Including 4 loop straps and 1 shoulder strap ·· Also available in bright yellow ·· 500D polyester material with PVC coating ·· Drybag 350: 35 l / 58 x 28 x 28 cm / 1,150 g ·· Drybag 600: 60 l / 71 x 33 x 33 cm / 1,300 g

Drybag 350 tail bag

BC.WPB.00.001.10001

Drybag 350 tail bag

BC.WPB.00.001.10001/Y

Drybag 600 tail bag

BC.WPB.00.002.10001

Drybag 600 tail bag Soft luggage accessories Luggage racks

BC.WPB.00.002.10001/Y  p.74  from p.38


79

NEW

Drybag 700 Built for all weather, all terrain: the expandable Drybag 700 carries up to 70 liters of luggage and offers reliable protection against water and dust. A large opening allows easy loading and unpacking and integrated clip adapters allow safe mounting of further Drybags.

Features ·· Universal fit for almost all motorcycles ·· Width adjustment zipper ·· Retroreflective details ·· Fastening system for other Drybags ·· Padded handle ·· D-rings for tight attachment close to the bike ·· Including 4 loop straps and 1 shoulder strap ·· 500D polyester material with PVC coating ·· Drybag 700: 70 l / 76 x 75 x 30 cm / 1,850 g

Drybag 700 tail bag Applications

BC.WPB.00.021.10000 sw-motech.com

Soft luggage accessories Luggage racks

 p.74  from p.38


Luggage backpacks

Racer / Trooper Our versatile backpacks are made from lightweight 600D polyester material and offer high wearing comfort. The compact Racer displays an especially compact outline, while the larger Trooper in addition comes with two main compartments that can be accessed from the outside.

Features Racer / Trooper ·· Padded backside, adjustable shoulder and waist straps for high carrying comfort and best fit ·· Strong carrying handle ·· Retroreflective details ·· Integrated rain cover ·· Cable port ·· Inner compartments ·· 600D polyester material ·· Racer: 16 l / 29 x 46 x 15 cm / 800 g ·· Trooper: 25 l / 33 x 47 x 18 cm / 1,200 g

Features Trooper ·· 2 main compartments ·· Integrated laptop holder 14/15" ·· Zippered outer pocket ·· Tie-down straps ·· Integrated helmet net

Racer backpack

BC.RUC.00.002.10000

Trooper backpack

BC.RUC.00.001.10000


81

Triton / Baracuda The waterproof and durable Triton and Baracuda backpacks are made for wet conditions. The comfortable backpacks come with a variety of features, like a useful compartment set-up for easy storage management, volume adjustment and an ergonomically designed carrying system.

Features Triton / Baracuda ·· Adjustable carrying system with padded waist strap ·· Roll closure ·· Zippered outer pocket ·· Adjustable side straps for volume compression ·· Retroreflective details ·· Organizer compartments ·· Padded laptop holder ·· Waterproof polyester material with PVC coating ·· Triton: 20 l / 35 x 66 x 14 cm / 1,650 g ·· Baracuda: 25 l / 38 x 73 x 21 cm / 1,800 g

Triton backpack

BC.WPB.00.004.10001

Baracuda backpack

BC.WPB.00.003.10001


Luggage backpacks

Drybag 300 The all-weather backpack Drybag 300 protects up to 30 liters of luggage from water and dirt and features an ergonomic carrying system. Available colours are grey or bright yellow.

Features ·· Waterproof roll closure ·· Padded shoulder and waist straps for high carrying comfort and best fit ·· Zippered outer pocket ·· Retroreflective details ·· Waterproof polyester material with PVC coating ·· 30 l / 26 x 48 x 24 cm / 1,200 g

Drybag 300 backpack

BC.WPB.00.011.10000

Drybag 300 backpack

BC.WPB.00.011.10000/Y


83

Drybag 20 The waterproof and lightweight waist bag Drybag 20 offers a safe place to store valuables and is made from easy to clean polyester material. Its compact size and high carrying comfort recommend the robust waist bag for every tour. Features > Padded waist belt > Zippered outer pocket > Retroreflective details > Waterproof polyester material with PVC coating > 2l / 22 x 17 x 11 cm / 340 g

Drybag 20 hip pack

BC.WPB.00.005.10002

Flexpack foldable backpack

BC.WPB.00.019.10000

Flexpack foldable backpack Folded together, the Flexpack needs no more space than a human fist and can easily be stored in any tank bag or under the seat. In just moments the Flexpack transforms into a 30 liter backpack that can carry a motorcycle helmet. Features ·· Lightweight and extremely compact when folded ·· Can carry a motorcycle helmet ·· 75D rip stop polyester material with water-resistant polyurethane coating ·· 30 l / 22 x 50 x 22 cm / 200 g


Protection handguards

KOBRA handguards The impact-resistant handguards made from polypropylene plastic offer maximum protection from the elements and stone-chipping. The full-wrap aluminium frame offers protection in crashes or sustained off-road riding.

Features ·· Bike-specific aluminium frame for super strong 2-point mounting to handlebar and internal handlebar thread ·· Bike-specific 1-point mounting available ·· Easy mounting of handguard shell to aluminium frame ·· Handguard shells made of impact-resistant polypropylene plastic

KOBRA handguard kit Applications

sw-motech.com


85

2-point mounting

1-point mounting

KOBRA handguards with 2-point mounting system are available for various models. The strong and full-wrapped aluminium frame guarantees extra safe mounting and best fit.

KOBRA handguards are also available with universal or bike-specific 1-point mounting. The mounting point is either directly to the handlebar or to the handlebar end.

Extension and LED indicator set for KOBRA handguards The optional extension made from impact-resistant plastic extends KOBRA if needed. Optional LED indicators ensure improved visibility in traffic while being perfectly integrated with the handguard form.

Accessories 1 Extension for KOBRA handguards

2 pcs. 50 % more protection. Plastic. Black.

HPR.00.220.30100/B

2 LED indicator set for KOBRA handguards

2 pcs. 16 LEDs/1 watt each. 12 V. Resistor set HPR.00.220.30700/B needed on bikes w/o original LED indicator.

HPR.00.220.30000/B

3 Resistor set for 1 watt LED indicators

2 pcs. For 10/20 watt indicator. 15 Ohm. Universal.

HPR.00.220.30700/B


87

Honda CRF1000L Africa Twin

Engine guard Protection on or off the road, our durable aluminium engine guards will prevent major damage from stone chips and collisions. State-of-the-art production technologies ensure perfect fit without compromising the motorcycles ground clearance. The attachment to original frame mounting points provides a secure fit and easy installation.

Features ·· Safe and easy fitting to original mounting points without drilling and welding ·· Bike-specific design for best fit ·· Including mounting hardware ·· Made from heavy-duty aluminium

Tip Bike-specific adventure sets include TRAX ADV aluminium cases, EVO carriers, ALU-RACK, engine guard and crash bars. Engine guard Extension for engine guard Applications

sw-motech.com


Protection engine guard

Brushed aluminium engine guard The perfectly suited BMW R nineT Scrambler engine guard is constructed using a 4 mm thick aluminium plate. The design of this guard allows air circulation for the engine block.

Engine guard with powder coated or anodized side protectors Some engine guards, like Honda NC750, include black powder coated side protectors that wrap around the engine block to provide both bottom and side protection while adding a serious look to the bike.

Front spoiler Front spoilers not only look good but provide additional protection. For some models, like KTM 1290 Super Duke GT, the front spoiler is available in matching powder coated colours.

Engine guard extension The front engine guard extension provides additional protection for valuable parts. The guards are made from bushed and powder coated aluminium and can be used with or without SW-MOTECH engine guard.


Menschen. Länder. Abenteuer. Motorrad-Reisen.


91

Honda CRF1000L Africa Twin

Crash bars Whether adventure or street bike: crash bars from SW-MOTECH provide the necessary increase in protection for tank, fairing and other components. The protective frames are custom built for each motorcycle model. This way the crash bar can play well with the bikes design without compromising riding and cornering quality. Carefully designed mounting elements ensure easy and secure installation without drilling, welding or cutting. Depending on the motorcycle model, we offer crash bars and upper crash bars in different materials and colours.

Tip Bike-specific adventure sets include TRAX ADV aluminium cases, EVO carriers, ALU-RACK, engine guard and crash bars. Crash bars Applications

sw-motech.com


Protection crash bars

BMW F 800 GS

Crash bars – adventure or clean look SW-MOTECH crash bars are ideally suited for each motorcycle model. Large or subtle crash bars are designed to provide maximum protection, optical integration and high-quality fit for adventure or street motorcycles. Yamaha XSR 700

Upper crash bars Durable upper crash bars protect tank and fairing while the tough-built constructed bars easily mount to SW-MOTECH crash bars or to the motorcycle's original crash bars. Depending on the model, the bike-specific bars are available as powder coated steel or stainless steel version. BMW R 1200 GS


93

Powder coated steel crash bars Available for various models with 22 or 27 mm steel tube diameter with black, silver or orange powder coated finish to prevent corrosion caused by the elements. Surface finishing is done by SW-MOTECHs state-of-the-art production plant in Brno, Czech Republic.

   

   

KTM 1290 Super Duke GT

Stainless steel crash bars The durable bars are constructed of heavy-duty 2.5 mm stainless steel to protect engine and important components from damages caused by either debris on the road or a crash. The blasted and electropolished stainless steel bars create a unique look and guarantee corrosion protection even with damages. Honda CRF1000L Africa Twin

CX carbon fiber crash bars – limited edition SW-MOTECH was the first manufacturer that presented a carbon fiber crash bar for motorcycles. The extremely durable crash bar was crafted in cooperation with CDT Group and offers superior tensile strength at half the weight of metal crash bars, a premium quality impact resistant surface finish and a slick aerodynamic design. BMW R 1200 R


95

Frame sliders Additional protection in case of an accident: CNC milled slider pads are made from abrasion-resistant polyamide and help to prevent damage to the motorcycle and get easily replaced. Compared to conventional frame sliders, the streamlined form of the SW-MOTECH frame slider guarantees a significantly better sliding effect in case of crashing. Frame slider kit Applications

sw-motech.com

Axle sliders Axle sliders offer additional protection for drive shaft or swing arm. The pads radius reaches 50 millimeters, providing a large impact area for best force distribution possible. Separately sold for front or rear axle as bikespecific single slider or set. Axle slider kit (front or rear) Applications

sw-motech.com

Stable connection through mounting axle


Protection Style Meets Function

Scrambler set | Suzuki SV650

01/02

07/08

03

04

05

06

09

01 Windscreen  02 Headlight guard  03 Radiator guard  04 Frame cover set  05 Frame cover set  06 License plate holder  07 Fender  08 Retro sticker set  09 Chain guard


97

Style Meets Function | BMW R nineT

01

03

04

02

01 Brake cylinder guard  02 Frame cap set  03 Brake reservoir guard  04 Cylinder guard


99

Extension for side stand foot Our side stand foot extensions offer a large contact surface to improve the motorcycles parking footprint on uneven surfaces and soft ground. The grooved upper ledge helps the driver to swing out the side stand easily even while wearing heavy-duty motorcycle boots.

Features ·· Crafted from high strength, CNC milled aluminium alloy ·· Anodized to protect the surface ·· Steel or stainless steel base for safe stand

Extension for side stand foot Applications

sw-motech.com

Honda CRF1000L Africa Twin

BMW R 1200 GS

Triumph Tiger Explorer

KTM 1190 Adventure


Safety Centerstand

Honda CRF1000L Africa Twin

Centerstand SW-MOTECH is usually the first supplier that offers high-quality aftermarket centerstands. Tough steel tube constructions offer best cornering and ground clearance, easy use and a safe stand for maintenance work as well as for parking a loaded bike.

Features ·· Bike-specific for easy installation and optimal ground clearance ·· Textured surface allows safe jack up ·· Good leverage for easy use ·· Sandblasted before powder coating for best corrosion resistance

Tip Use a centerstand to protect your tires while long-term parking.

Centerstand Applications

sw-motech.com


101

Suzuki V-Strom 1000

Yamaha Tracer 700

Kawasaki KLR 650

Honda NC750X

Engine guard extension for centerstand The engine guard extension provides additional protection to valuable parts and is based on a simple bolt-on installation to the centerstand. The extension for Honda Africa Twin for example protects the strut deflection, for BMW R 1200 GS models manifold and rear swing arm get protected. BMW R 1200 GS LC

Accessories Spring mounting tool

For centerstand.

WFF.00.138.100

Centerstand assist grip

For centerstand.

Applications: sw-motech.com


Safety mirror extension

Mirror extension Mirror extensions provide a better view of traffic behind by increasing the distance of the mirrors from fairing and handlebar. Different configurations support the integration in the appearance of enduro, street or racing bikes.

Blocked view without extension

Mirror extension Applications

sw-motech.com Free view with extension


103

BMW only

Mirror thread

Mounted to mirror thread / black powder coated steel / up to 6.6 cm lateral relocation / free access to switches

Mounted to mirror thread / black anodized aluminium / up to 4 cm height increase and up to 4 cm lateral relocation

Profile extension

Hinge extension

Mounted to fairing / machined polyamide material / up to 4 cm lateral relocation

Aluminium / up to 4 cm lateral relocation


Safety EVO lights

NEW

EVO lights For the new EVO lights, SW-MOTECH has chosen a strong partner for renowned companies in the automotive industry. EVO lights represent outstanding design, high-quality standards and reliable water and dust protection. The long life LED technology guarantees trouble-free and maintenance free operation for years.

Features

·· Input voltage: 12 V DC, connects directly to the motorcycle battery, no changes on the motorcycle electric necessary ·· Weatherproof and illuminated handlebar switch for easy handling

EVO fog light ·· LED:

12 W

·· Luminous flux:

1,050 LM

·· ECE test mark:

ECE R19 F3

·· Strong aluminium housing, black powder coated ·· Trouble-free and maintenance-free operation through wear-free LED, consuming significantly less power

EVO high beam ·· LED:

12 W

·· Outer diameter: 7.1 cm

·· Luminous flux:

800 LM

·· Water and dust proof (IP69)

·· ECE test mark:

ECE R113 Rev.2


105

Universal clamps for crash bars

Bike-specific mounts

EVO high beam EVO high beam lights are ideal for riding long distances in on/off road conditions where maximum beam distance with narrow dispersion is desired to increase visibility and safety.

EVO fog lights EVO fog lights with broad dispersion create more safety and better visibility in bad weather conditions and increase your visibility to on-coming traffic.

EVO lights 1 EVO high beam kit

LED. Black. ECE test mark. EVO high beam lights/light mount/cable harness/power switch. In pairs.

NSW.01.004.61000/B

2 EVO fog light kit

LED. Black. ECE test mark. EVO fog lights/light mount/cable harness/power switch. In pairs.

NSW.01.004.51000/B Applications: sw-motech.com

3 EVO high beam

LED. Black. ECE test mark. EVO high beam/power switch/cable harness. In pairs.

NSW.00.490.10100

4 EVO fog lights

LED. Black. ECE test mark. EVO fog lights/power switch/cable harness. In pairs.

NSW.00.490.10000

Accessories 5 Light mount

Black. Bike-specific. Without lights.

6 Light clamp set

Black. Universal. For crash bars with Ă˜ 22, 26, 27, 28 mm. Without lights.

7 EVO high beam switch for cockpit

For high beam lights. Bright blue. Splashproof. 30 cm cable.

EMA.00.107.12800

8 EVO fog light switch for cockpit

For fog lights. Bright green. Splashproof. 30 cm cable.

EMA.00.107.12900

NSW.00.004.13000/B


Ergonomics gear levers

Gear levers Gear levers made by SW-MOTECH combine choice materials, innovative design and perfect fit. The levers are ergonomically designed to adjust to all shoe sizes due to stepless or incremental adjustment.

Features ·· Individual adjustment due to 1, 2 or 3 cm or stepless adjustable unit (bike-specific) ·· A spring lock ensures functionality through folding, even after a fall ·· Material: CNC machined from high tensile strength aluminium and HART-COAT® finish

Gear levers Applications Extension for gear lever

sw-motech.com FSC.00.127.10000/S


107

Triumph Tiger 1200

Spring-loaded folding pegs to prevent breakage in minor drops

Optional 15 mm extension for gear lever


Ergonomics footrests

NEW

EVO footrest The new EVO footrest enhances stability, comfort and traction under a variety of conditions. Pivotable, teethed elements offer 36 possible settings. Individual adjustment for height, position and angle guarantee best ergonomics possible.

Features ·· Easy installation to original mounting points ·· 36 position settings (front, back, top, down, angle) ·· Strong connection due to teethed and bolted elements ·· Marks facilitate symmetric adjustment of both sides ·· Made from electropolished and corrosion resistant cast stainless steel ·· Profile with rounded edges offer excellent grip ·· Removable rubber insert with increased surface area (ca. 8 x 5 cm) for more support and comfort ·· All mounting hardware included

EVO footrest Applications

sw-motech.com


109

Footrest SW-MOTECH footpegs are made from high-grade, ­corrosion-resistant stainless steel and are ideal for touring and off-road use. The textured surface provides superior traction and the massive platform increases comfort and stability. The affordable height adjustable pegs can be mounted in original height or 15 mm lower than the factory position to increase leg room. The pegs are also hinged to fold back in case of a tip over. The hinge is made from high-strength aluminium alloy.

Footrest Applications

sw-motech.com

Footrest extension for Honda CRF 1000L SW-MOTECH exclusively designed a footrest extension for the new Africa Twin to enlarge the contact area for more control and comfort. The CNC milled aluminium profile measures 59 x 86 mm and features a strong construction, sole-friendly grips and a great design.

Footrest extension

Honda CRF 1000L FRS.01.622.10000/B


Ergonomics bar positioning

Bar riser (universal) Universal bar risers offer a more relaxed seating ­position and improved comfort. A wide range of ­universal risers is available in silver or black with height adjustments from 15 to 50 mm. The high-quality aluminium risers fit handlebars with diameter 22 or 28 mm. Features ·· Hole spacing 32-38 mm (Ø 22 mm) or 37-46 mm (Ø 28 mm) ·· Available height for handlebars with Ø 22 mm: 15, 20, 25, 30 or 50 mm. ·· Handlebars with Ø 28 mm providing a height increase of 20 or 30 mm ·· Powder coated aluminium, black or silver

Bar riser for Ø 22 mm handlebar H=15 mm.

 LEH.00.039.22000.15/B

       LEH.00.039.22000.15/S

H=20 mm.

 LEH.00.039.22000.20/B

       LEH.00.039.22000.20/S

H=25 mm.

 LEH.00.039.22000.25/B

       LEH.00.039.22000.25/S

H=30 mm.

 LEH.00.039.22000.30/B

       LEH.00.039.22000.30/S

H=50 mm.

 LEH.00.039.22000.50/B

       LEH.00.039.22000.50/S

Bar riser for Ø 28 mm handlebar H=20 mm.

 LEH.00.039.24000.20/B

       LEH.00.039.24000.20/S

H=30 mm.

 LEH.00.039.24000.30/B

       LEH.00.039.24000.30/S

H=20 mm. Milled.

 LEH.00.039.20200/B

       LEH.00.039.20200/S

Applications

sw-motech.com


111

Bar back (universal) If you find it difficult to comfortably reach the handlebar, you should consider purchasing a bar back. Our durable aluminium bar backs relocate the handlebar 30 mm up and 21/22 mm back. That adjustment adds more comfort during longer trips.

Moves bar position back 21/22 mm

Features ·· Moves bar position up 30 mm and back 22 mm ·· Hole spacing: 32-38 mm (Ø 22 mm) or 37-46 mm (Ø 28 mm) ·· High-quality aluminium, powder coated, black or silver Bar back for Ø 22 mm handlebar. H=30 mm. Back 21 mm.  LEH.00.039.21000/B

          LEH.00.039.21000/S

Bar back for Ø 28 mm handlebar. H=30 mm. Back 22 mm.  LEH.00.039.23000/B Applications

          LEH.00.039.23000/S sw-motech.com


Navigation GPS mounts

Removable GPS mounts Bike-specific GPS mounts get installed in the handle­ bar area to allow instant attachment and removal for GPS or multimedia device and reduce vibrations to mounted devices. All bike-specific and shock-absorbent GPS mounts are designed to fit handlebars, crossbars or other mounting points in the cockpit area to ensure a clear view to the instruments. The top ­section pivots for optimal viewing angle and is com­ patible with various GPS devices and SW-MOTECHs Navi Case Pro.

Features ·· GPS mount made from powder coated steel ·· Bike-specific design for best fit ·· Removable, pivotable and shock-absorbent ·· Multi-piece GPS mount and mounting material included in delivery

GPS mount Applications

sw-motech.com


113

Handlebar GPS mount Removable and pivotable handlebar GPS mounts get ­installed directly to the handlebar and guarantee a clear view to the mounted device.

Cockpit GPS mount A bike-specific and powder coated steel bracket serves as mounting base for GPS mount and device in the cockpit area. Mounted to original mounting points, ­these GPS mounts ensure reliable and exact fit.

Crossbar GPS mount Ø 10/12, 16 mm Some motorcycles offer ideal GPS mounting options to crossbar or windshield mount in the cockpit area. Therefore we offer removable GPS mounts with clamps for crossbars with diameter 10/12 mm or 16 mm.


Navigation universal kits

Universal kits Universal kits are designed to safely and securely attach gadgets and accessories to your motorcycle. SW-MOTECH offers a vast line-up of attachment options for GPS device, smartphone or GoPro camera. All kits include a 1" ball for M6 or M8 thread, mirror thread mount or mounting clamp. The mounting clamp fits handlebars with diameter 22, 28 mm or 1". The pivotable RAM arm allows almost infinite adjustment to achieve the perfect viewing angle. Besides a water-resistant Navi Case Pro, universal kits provide either a GPS or GoPro camera mount.

Features ·· Complete set for mounting GPS devices, smartphones or GoPro camera, no additional accessories for mounting necessary ·· Ball and 3" RAM arm for individual positioning ·· 1" ball for M6 or M8 thread, mirror thread or mounting clamp ·· Mounting clamp for handlebar with diameter 22, 28 mm or 1"


115

02

02

03 01

05 04

02

01

1" ball kit

Universal GPS mount kit

Universal GoPro camera kit

Universal GPS mount kit with navi case Pro S

Universal GPS mount kit with navi case Pro M

Universal GPS mount kit with navi case Pro L

P

P P P P P

P P P P

P P P P P

P P P P P

P P P P P

02 03 04 05

P

06

P

07

P

08

P

P

P

P

P

P P

GPS.00.308.30100/B

GPS.00.308.30300/B

CPA.00.424.12500/B

GPS.00.308.30400/B

GPS.00.308.30001/B

GPS.00.308.30201/B

09 10 Art.-Nr.

Components in delivery: 01 Universal mounting clamp with rubber inserts  02 Ball with M8 thread and M6 converter  03 GPS mount for mirror thread  04 RAM arm 3 inch  05 Universal mount plate  06 GoPro camera adapter  07 Navi Case Pro S  08 Navi Case Pro M 08 Navi Case Pro L  09 Mounting material


Navigation Navi Case Pro

Navi Case Pro The water-resistant Navi Case Pro features a touch sensitive screen cover and an integrated sun visor. The water-resistant zippers seal out moisture to protect devices and internal Velcro® straps secure the device in the padded interior. Navi Case Pro is available in three sizes

Features ·· Touch sensitive screen cover ·· Shape retaining body with reinforced base plate ·· Cable port ·· Circumferential sealed zipper with zipper garage ·· Removable foam inlay ·· Compatible with optional SW-MOTECH GPS mounts, universal kits, clip adapter and RAM systems


117

Safe mounting The durable universal plastic base plate with hole pattern is compatible with optional SW-MOTECH GPS mounts, universal kits, clip adapter and RAM systems.

Easy use cable port The Navi Case Pro features a cable port to power ­electronic gadgets. Power supply options are listed from p.120.

Smart interior Internal VelcroÂŽ straps secure the device in the removable padded interior to keep it in place.

Navi Case Pro S

For devices up to 146 x 83 x 38 mm.

BC.GPS.00.007.10000

Navi Case Pro M

For devices up to 131 x 96 x 38 mm.

BC.GPS.00.008.10000

Navi Case Pro L

For devices up to 156 x 111 x 38 mm.

BC.GPS.00.009.10000


Navigation hardcase for smartphones / GPS mount with bar clamp

Hardcase for smartphones Water-resistant hardcases for smartphones combine all weather protection with a versatile mount that can be pivoted for use as a navigation device. Shielded cable ports and a soft silicone interior ensure that the smartphone is well protected from vibration, dust and dirt. The hardcases are designed with a camera window that protects the camera lens and a touch screen friendly screen cover.

Hardcases for GPS mount. Weatherproof. Black.

Features ·· Sturdy hard shell for smartphones ·· Pivoting 360° mount ·· Touch screen friendly, water-resistant screen lid ·· Vibration damping silicone interior for best fit ·· Covered charging and headphone ports ·· Compatible with optional SW-MOTECH GPS mounts, universal kits, clip adapter and RAM systems

Hardcases for GPS mount. Weatherproof. Black.

Hardcase for iPhone 5/5s

GPS.00.646.20200/B

Hardcase for Samsung Galaxy S5

GPS.00.646.20400/B

Hardcase for iPhone 5c

GPS.00.646.20300/B

Hardcase for Samsung Galaxy S6

GPS.00.646.20700/B

Hardcase for iPhone 6/6s

GPS.00.646.20500/B

Hardcase for Samsung Galaxy S7

GPS.00.646.20800/B

Hardcase for iPhone 6 Plus

GPS.00.646.20600/B


119

GPS mount with handlebar clamp The GPS mount with handlebar clamp provides a universal vibration and shock-absorbent mount for GPS devices on tubular handlebars with different diameters. The aluminium bar clamp is available with anodized, brushed or polished surfaces.

Features ·· Fits handlebars with diameter 22, 1", 28 or 32 mm ·· Universal hole pattern: compatible with optional SW-MOTECH clip adapter for GPS mount, Navi Case Pro, hardcases for smartphones, mounts with Richter plate and RAM systems ·· Pivoted bracket for best positioning ·· Included in delivery: vibration damped GPS mount, handlebar clamp and mounting hardware GPS mount with handlebar clamp. Vibration-damped. For Ø 22 mm handlebar. Black.

GPS.00.308.10000/B

For Ø 22 mm handlebar. Silver.

GPS.00.308.10000/S

For 1" (Ø 25.4 mm) handlebar. Silver.

GPS.00.308.10100/S

For Ø 28 mm handlebar. Silver.

GPS.00.308.10200/S

For 1 1/4" (Ø 32 mm) handlebar. Silver.

GPS.00.308.10300/S

Clip adapter for GPS mount The clip adapter is compatible with SW-MOTECH Navi Pro Cases and all GPS mounts to allow quick mounting and ­demounting of various GPS systems. One clip adapter plate gets mounted on GPS bag or device, the other plate attaches to the GPS mount. Features ·· Compatible with optional SW-MOTECH GPS mounts, universal kits, mounts with Richter plate and RAM systems ·· Size: 57 x 42 x 12 mm ·· Material: solid plastic with brass M4 press nuts Clip adapter for GPS mount

GPS.00.308.10501/B


121

Universal electric kit The universal electric kit allows power supply of electric accessories through cigarette lighter outlet on almost all motorcycles. The kit includes also two brackets for mounting the cigarette lighter outlet on handlebars with M8 or M10 screws or through a screw cap directly into the fairing. The also included USB plug allows power supply of electronic devices without special charger.

Features ·· Universal cockpit power supply with splash-proof cigarette lighter outlet ·· To mount on handlebar or fairing ·· Connects directly to the motorcycle battery ·· USB power output up to 1,000 mA / 5 V ·· Included in delivery: cigarette lighter outlet with cable harness and fuse, USB adapter, 2 mounting brackets, mounting material Universal electric kit

EMA.00.107.20001/B


BEST OF 2017 Contents

(a) reservation of title shall extend to products arising from the processing, mixing and combining of our Goods to their full value, in which case, however, we shall be regarded as the producer. If, in processing, mixing or combining them with the Goods of third parties their right to ownership remains, we shall acquire co-ownership in the ratio of the invoice value of the processed, mixed or combined Goods. Otherwise, the same shall apply to the product emerging as to the Goods delivered under the reservation of title. (b) The Purchaser shall assign demands arising from re-sale of the Goods or the products against third parties already now in full or at the amount of any co-ownership share of ours in accordance with the above paragraph as surety to us. We accept such assignment. The duties of the Purchaser stated in sub-section 2 shall also apply in view of the assigned demands. (c) The Purchaser is also authorised to collect the demand as well as we are. We undertake not to collect the demand as long as the Purchaser meets his payment obligations towards us, does not come into default of payment, no application for the opening of insolvency proceedings has been made and no other defect in his efficiency is apparent. Is this is the case, however, we may demand that the Purchaser notifies us of the assigned demands and their debtors, supplies all information necessary for collection, hands over the appropriate documents and notifies the debtors (third parties) of assignment. (d) If the realisable value of the sureties exceeds our demands by more than 10%, we shall release sureties in accordance with our choice on request by the Purchaser. Section 7: Purchasers claims for defects (1) The statutory regulations shall apply to the Purchasers rights in respect to material and legal defects including incorrect and reduced delivery and incorrect or defective assembly instructions) inasmuch as nothing else has been determined in the following. In all cases the statutory special regulations in case of final delivery of the Goods to a consumer remain unaffected (supplier recourse sections 478, 479 BGB). (2) The basis of our defect liability is, above all, the agreement made concerning the composition of the Goods. All product descriptions concerning the Goods, which are the subject matter of the individual contract, shall be regarded as agreement concerning the composition of the Goods; there is no difference here whether the product description originates from the Purchaser, from the producer or from us. (3) Inasmuch as the composition has not yet been agreed, it shall be judged in accordance with statutory regulation whether there is a defect or not (section 434 sub-section 1 sentence 2 and 3 BGB). We do not assume any liability, however, for public statements by the producer or other third parties (e.g. advertising statements). (4) The claims for defect claims of the Purchaser, who is a businessman, require that he has met his statutory examination and complaint duties without delay. Notice is regarded as without delay if it takes place within seven days in written form with a description of the defect. The same shall apply for defects which are discovered later. (5) If the item, which has been delivered, is defective, we may first of all choose whether we provide subsequent performance by eliminating the defect (subsequent improvement) or by delivery of an item free of defects (replacement deliv-

ery). Our right to refuse subsequent performance under the statutory prerequisites remains unaffected. (6) We are entitled to make the subsequent performance owed dependent on the Purchaser paying the due purchase price. The Purchaser is, however, entitled to retain a reasonable part of the purchase price in the ratio to the defect. (7) The Purchaser shall give us the time and opportunity necessary for the subsequent performance owed, in particular to hand over the Goods which are subject to complaint for purposes of testing. In the case of replacement delivery, the Purchaser shall return the defective item in accordance with the statutory regulations. Subsequent performance means neither removal of the defective item nor re-installation if we were not originally obliged to install. (8) We shall bear the expenditure necessary for examination and subsequent performance, in particular the transport, way, labour and material costs (not: removal and installation costs) if there is in actual fact a defect. If however, the defect elimination demand of the Purchaser turns out to be unjustified, we may demand the costs arising for this from the Purchaser. (9) In urgent cases, e.g. if operating safety is endangered or to avert disproportionate damage, the Purchaser has the right to eliminate the defect himself and to demand compensation for the objectively necessary expenses for this from us. We shall be informed about the action taken independently, if possible previously. There is no right to act independently if we would have been entitled to refuse such subsequent performance in accordance with the statutory regulations. (10) If subsequent performance has failed or a reasonable period to be set for the subsequent performance by the Purchaser has expired without success, or is dispensable in accordance with the statutory regulations, the Purchaser may withdraw from the Purchase Contract or reduce the purchase price. In the case of inappreciable defects, there is however no right of withdrawal. (11) Any Purchasers claims to damages or compensation for futile expenditure only exist in accordance with the stipulations of section 8 and are otherwise ruled out. Section 8: Other liability (1) Inasmuch as nothing else evolves from these General Sales Terms and Conditions including the following provisions, we shall be liable in the case of breach of contractual and non-contractual duties in accordance with the relevant statutory regulations. (2) We shall be liable for damages – no matter for which legal reason – in the case of intent and gross negligence. In the case of ‚simple‘ negligence, we shall only be liable a) for damage arising from fatal injury, physical injury or damage to the health b) for damage arising from the breach of a significant contractual duty (duty the performance of which enables correct execution of the Contract in the first place and on the adherence to which the contract partner may and generally rely); in this case, however, our liability is limited to compensation for the foreseeable, typically arising damage. (3) The limitations of liability stated in sub-section 2 shall not apply inasmuch as we have maliciously concealed a defect or have assumed warranty for the composition of the Goods. The same shall apply to the Purchasers claims in accordance with the Product Liability Act.

(4) Due to any breach of duty, which does not consist of a defect, the Purchaser may only withdraw (from the Contract) or terminate if we are responsible for the breach of duty. Any free termination right of the Purchaser (in particular in accordance with sections 651, 649 BGB) is ruled out. Otherwise the statutory prerequisites and legal consequences shall apply. Section 9: Re-sale Active re-sale of our products by the Purchaser in countries outside Germany or active or passive re-sale in the US or Canada requires our previous expressed and written approval. In the case of such re-sale without our approval, the Purchaser shall indemnify us against any claim in particular for reasons of product liability or patent and trademark protection. Section 10: Purchasers own examination duties The Purchaser shall check within his own responsibility whether a product purchased by us may be assembled or used in accordance with the traffic and traffic licence provisions applicable in the intended place of use. We shall assume no liability for non-permitted assembly or taking into service unless we have expressly made a corresponding statement about the specific permissibility for the product. Section 11: Choice of law and place of jurisdiction (1) The law of the Federal Republic of Germany shall apply for these General Sales Terms and Conditions and all legal relationships between us and the Purchaser excluding international uniform law, in particular the CISG (UN Convention on Contracts for the International Sale of Goods). Prerequisites and the effects of the reservation of title in accordance with section 6 are subject to the law of the place in which the item is stored inasmuch as in accordance with that the choice of law made is impermissible or ineffective in favour of German law. (2) If the Purchaser is a businessman in the terms of the German Commercial Code, a legal entity under public law or a special fund under public law, the exclusive – also international – place of jurisdiction for all disputes arising from the contractual relationship, either directly or indirectly, shall be our seat of business in Rauschenberg. We are, however, also entitled to take action at the Purchasers general place of jurisdiction of the Purchaser. GSTAC as of 01.01.2017

SW-MOTECH GmbH & Co. KG Ernteweg 8/10 . 35282 Rauschenberg Amtsgericht Marburg, HRA 3946 . USt.ID: DE191 459 243 Personally liable: BAGS-CONNECTION Verwaltungs GmbH Fichtenweg 19 . 35066 Frankenberg . Amtsgericht Marburg, HRB 5067 Represented by: Jörg Diehl, Kai Jockel, Jürgen Swora, Achim Kessler Photo: Daniel Keller, Björn Becker (SW-MOTECH); Erik Peters: title, p. 119, 162, 172, 184; Detlev Louis Motorrad-Vertriebsgesellschaft mbH: p. 44, 64, 68, 70, 132, 138, 146; Nick Johnson: p. 66 Illustrations: Christian Geil, Björn Becker (SW-MOTECH)


General Sales Terms and Conditions General Sales Terms and Conditions of SW-MOTECH GmbH & Co. KG, Ernteweg 8/10, 35282 Rauschenberg, Germany.

Section 1: General, sphere of applicability (1) These General Sales Terms and Conditions (GSTAC) shall apply to all our business relationships with our customers (hereinafter referred to as the “Purchasers“). The General Sales Terms and Conditions shall apply only if the Purchaser is an entrepreneur (section 14 BGB1), a legal entity under public law or a special fund under public law. (2) The General Sales Terms and Conditions shall apply in particular for contracts governing the sale and/or the delivery of moveable items (hereinafter referred to as the “Goods“) without any consideration of whether we produce the Goods ourselves or buy them from suppliers (sections 433, 651 BGB). The General Sales Terms and Conditions shall apply in the particular version concerned as a framework contract also for future contracts governing the sale and/or delivery of moveable items with the same Purchaser without our having to draw attention to this in each individual case; we shall inform the Purchaser in such a case without delay about any amendments to our General Sales Terms and Conditions. (3) Our General Sales Terms and Conditions shall apply exclusively. Any deviating, contrary or supplementary general terms and conditions of the Purchaser shall only become a part of this Contract then and inasmuch as we have expressly agreed to their application. This requirement for agreement shall apply in every case, for example also if we carry out delivery to the Purchaser without reservation and with knowledge of the Purchasers general terms and conditions. (4) Any individual agreements made with the Purchaser in the individual case (including ancillary arrangements, supplements and amendments) shall always have priority over these General Sales Terms and Conditions. For the content of such agreements, an agreement made in written form or our confirmation given in written form shall be decisive. (5) Declarations and notices of legal significance which are to be given to us by the Purchaser after conclusion of contract (e.g. the setting of periods, notices of defect, declaration of withdrawal or reduction) require written form to be effective. (6) Indications to the applicability of statutory regulations only have clarifying significance. Even without such clarification, the statutory regulations shall apply therefore without their being amended directly or excluded expressly in these General Sales Terms and Conditions. (7) For orders through our online shop, the indications given there shall be observed separately. Section 2: Conclusion of Contract outside the online shop (1) For the conclusion of contract through our online shop, the “General Terms and Conditions for Purchases in the Online Shop“ included there shall apply. (2) Our offers outside the online shop are subject to confirmation and non-binding. This shall also apply when we have given the Purchaser catalogues, technical documentation (e.g. drawings, plans, calculations, references to DIN norms),

other product descriptions or documents – also in electronic form – in which we reserve title and copyright. (3) The acceptance of the offer of purchase may be declared by us to the Purchaser either in written form or through delivery of the Goods to the Purchaser. Section 3: Delivery dates (1) Delivery dates or periods, which have not been expressly agreed as binding, are exclusively non-binding offers. (2) Inasmuch as we cannot keep to binding delivery periods for reasons for which we do not bear the responsibility (non-availability of service), we shall inform the Purchase about this without delay and, at the same time, give notice of the probably, new delivery period. If the service is not available even within the new delivery period, we are entitled to withdraw either fully or partly from the Contract; any already provided counter performance of the Purchaser shall be refunded without delay. Any self-delivery by our suppliers shall be regarded as non-availability in these terms if we have concluded a congruent hedge transaction, neither we nor our suppliers have incurred any fault and we are not obliged to procurement in the individual case. (3) The rights of the Purchaser in accordance with section 8 of these General Sales Terms and Conditions and our statutory rights, in particular in case of exclusion of the obligation of service (e.g. due to impossibility or unreasonableness of service and/or subsequent performance), are not affected. Section 4: Delivery, transfer of risk, return of Goods free of defects (1) Delivery shall take place ex works which shall also be the place of performance. On request by and at the expense of the Purchaser, the Goods shall also be sent to another place of destination (sale to destination). Inasmuch as nothing else has been agreed, we are entitled to determine the type of shipping (in particular the carrier, the despatch route, packaging) ourselves. (2) The risk of accidental destruction or accidental deterioration of the Goods shall be transferred at the latest on being handed over to the Purchaser. In the case of sale to destination, however, the risk of accidental destruction or accidental deterioration of the Goods and the risk of delay shall be transferred to the carrier or the haulage contractor already on delivery of the Goods to the carrier or the haulage contractor. (3) There is no take-back obligation for Goods delivered free of defects. If we declare that we are prepared, by way of fairness, to take back Goods which are in faultless condition and in their original packaging, a Goods credit deducting a re-storage fee of 10% of the calculated price shall be made after the Goods have been received by us and the Purchaser has provided verification of delivery. If the Goods have been unpacked but are complete and undamaged, 20% of the calculated price shall be deducted for control, packaging and re-storage work. There shall be greater deduction if the Goods are incomplete and/or damaged whereby in such cases we reserve the right to refuse to take back the Goods. Any set-off shall only be permitted after credit has been given. Before return of the Goods in the case of being taken back for reasons of fairness, the Purchaser shall request a RMA number (Return Merchandise Authorisation) as the Goods shall be quickly and correctly assigned by us on receipt.

Section 5: Prices, payment conditions (1) Inasmuch as, in the individual case, nothing else has been agreed, our current prices, which are applicable at the point of time of conclusion of contract, shall apply ex store plus the statutory VAT. (2) In the case of sale to destination (section 4 sub-section 1), the Purchaser shall bear the transport costs ex store and the costs of any transport insurance if desired by the Purchaser. Any customs duties, charges, taxes or other public levies shall be borne by the Purchaser. We shall not take back any transport or any other packaging costs in accordance with the stipulation of the Packaging Regulation; they shall become the property of the Purchaser with the exception of pallets. (3) Our invoices are due on issuance and payable net without deduction. Any other payment period requires separate agreement. We reserve the right to request advance payment in individual cases. If direct debit has been agreed, the payment amount shall be due one day after the receipt of invoice unless a different due date has been stated on the invoice. Advance information of direct debit (SEPA pre-notification) shall take place together with the invoice. Receipt of advance information, at the latest one day before due date is sufficient (debit of invoice sum). We are entitled to demand interest amounting to the credit costs that we have to pay, but to at least one percent per month, from the Purchaser, who is a businessman in the terms of the Commercial Code (HGB), from due date onwards and from the Purchaser, who is not a businessman, from default onwards. (4) The Purchaser shall only have the right to set-off or retention inasmuch as his claim has been established with legal effectiveness or is undisputed. In the case of defects in the delivery, the counter rights of the Purchaser, in particular in accordance with section 7 sub-section 6 sentence 2 of these General Sales Terms and Conditions, remain unaffected. Section 6: Reservation of title (1) Up until full payment of all our present and future demands from the Purchase Contract and a current business relationship (secured demands), we reserve title in the sold Goods. (2) The Goods, which are subject to reservation of title, may neither be assigned to third parties before full payment of the secured demands, nor transferred for security. The Purchaser shall notify us without delay and in writing if and inasmuch access by third parties to Goods, which belong to us, takes place. (3) In the case of behaviour on the part of the Purchaser contrary to contract, in particular in the case of non-payment of the due purchase price, we shall be entitled, in accordance with the statutory regulations, to withdraw from the Contract and/or demand surrender of the Goods on the basis of the reservation of title. A demand for surrender does not at the same time mean withdrawal; rather we are entitled to demand surrender of the Goods and reserve the right to withdrawal. If the Purchaser does not pay the due purchase price, we may only assert these rights if we have previously set the Purchaser a reasonable period for payment without success or such setting of a period is not necessary in accordance with the statutory regulations. (4) The Purchaser is entitled to resell and/or process the Goods, to which title is reserved, in the correct course of business. In such a case, the following provisions shall apply in addition:


BEST OF  2017

WER.PRI.BOB.EN.2017

SW-MOTECH GmbH & Co. KG Ernteweg 8/10 . 35282 Rauschenberg . Germany phone +49 6425 8168-050 . fax +49 6425 8168-10 info@sw-motech.com . www.sw-motech.com

SW-MOTECH BEST OF 2017 ENG  
Read more
Read more
Similar to
Popular now
Just for you