Changing my Oil
To start with, I have to put the bike on the centre stand. Then remove the belly pan, I then use my oil drip pan, which as you can see is a plastic water can that I have sawn in half which fits nicely under the car. On the GTR, I have an oil drain plug and the oil filter, so first drained the oil then removed the oil filter. Cleaned up the housing and replace the new filter, put in the drain plug. Fill with new oil to the marks. I left it for a few minutes to settle, then started the engine for a few minutes, which circulated the oil round and though the filter. Turned off the engine and let it settle for a few minutes, topped up and repeated a couple more times until the oil level was stable. Felix The SAM Observer August 2012
The August 2012 edition of "The SAM Observer"