TIE-ROD SYSTEMS
HIGH
SRS page 22.
P2H page 29.
RDS page 35.
BASIC B3 FORK page 44.
AM ADJUSTER FORK page 44.
Choosing the right tensile tie-rod system Stainless steel tensile tie-rod selections
An outstanding structural design requires good components as well as good execution. Due to the apparent load factor applied to tension rods special care in installation is required. Properly installed and maintained tensile tie-rod structures will provide many years of satisfaction for the occupants.
STAINLESS STEEL
- Always use tensile tie-rod in a straight line or in-line pull only. - Never use tensile tie-rod systems for lifting purposes.
TIE-ROD SYSTEMS
strudyna.com
copyright@Strudyna Co., Ltd. 2011.
- Always choose the proper rod system based on the calculated loads. - Never overload the tie-rod system greater than its designed working load.
Choosing the right tensile rod system can be the difference between an average or spectacular architectural design. The main criteria to work through are the loads, applications and corrosion performance. Loads are defined by size; however special rod configuration can offer a higher performance ratio per diameter.
page 3