Page 1

==== ==== For More Information About Wooden Garden Sheds, I Highly Recommend that You Visit This Link Right Now: ==== ====

A garden shed is a great addition to any backyard. It gives you the much needed storage space for your garden tools and also provides great convenience due to it being so near your garden work area. However, before you embark on building your very own garden tool shed, it is vital that you understand the importance of selecting a good shed base. Whether it is a lifetime shed, cedar garden shed or run sheds, a stable base should be the foundation of any good shed. The base is the most important part of the shed and so do take extra care and caution when constructing it. Of course, you can always pay a professional to build just the base for you, but why bother with that when you can do it yourself with simply a little more knowledge and some detailed instructions. First of all, it is important that you do not build your garden tool shed base too close to walls or fences to ensure sufficient room for your shed roofs to be built. Also, try to remove branches that are in the way of the shed. Once the location is selected, determine the material you want to use for your shed base. Concrete, paving slabs and wood for sheds are the common choices. Each has its own advantages and drawbacks. Concrete bases are best used for run sheds and large lifetime sheds. After marking your area, the ground will have to be excavated to around 6 inches deep. Subsequently, 3 inches of brick rubble will be filled up and used as your base foundation. After you have done this, cut and fit 4 timber rails in. These will act as frames for the concrete. When all that is done, lay about 3 inches of concrete to nicely fill up the 6 inch deep space that you have made. You can use either bags of dry mixed concrete or make a simple mixture of ballast, cement and water. Paving slabs is the next method you can use. An excavation of only 2.5 inches deep will be enough for this method. Lay a mixture of cement and building sand in the ratio of 1:8 to about 1.5 inches deep. Subsequently, work on leveling this mixture and start to lay the paving slabs. Try to work from the corners inwards. Ensure the top of the slabs is higher than the surrounding ground. Also, it might be easier to tap the slabs in using a rubber mallet. The final method you can use is wood for sheds. To be more specific, you will probably be looking at timber bearers. Excavate to 2 inches deep and lay 1.5 inches of gravel. Lay concrete and timber bearers down about 16 to 24 inches apart. Similar to the previous method, try using a rubber mallet to tap the timber bearers down for best results.

For a good place to find out more information and advice on Garden Sheds CLICK HERE you will

even have a chance to check out loads of free shed plans.

Article Source:

==== ==== For More Information About Wooden Garden Sheds, I Highly Recommend that You Visit This Link Right Now: ==== ====

Want to Know More About Wooden Garden Sheds?  

For More Information About Wooden Garden Shed... I Highly Recommend that You Visit This Link Right Now: http://92832ft7lpfmun9cn0ebr7-kcl.h...