Page 749

Cables | Power 190~250V AC connectors

sec. Ø

suitable for

Lm

M 3 pin

3 x 1,5 mm²

SteelWalk

2

connectors

sec. Ø

suitable for

Lm

F 3 pin

3 x 1,5 mm²

SteelWalk

2

connectors

sec. Ø

suitable for

Lm

M + F 3 pin

3 x 1,5 mm²

SteelWalk

5

98147

10

98146

99056

Cables | Power 190~250V AC 99057

Extension cable | Power 190~250V AC

DMX Addresser

The DMX Addresser enables the configuration of StarLine, SteelWalk and Paseo DMX systems in a easy and flexible manner, for astounding scenographic effetcs. It is advised, before mounting the fixtures, to assign a DMX address related to the installation area of every fitting. The configured address can be modified later, if necessary. For small installations, it is possible to ask the Company to configure the DMX addresses of the fixtures, according to the project specifications.

DMX Addresser input

output

Mini USB

Bus DMX 512

89564

CONNECTION: 1. By means of a Mini USB cable (not included) connect the DMX controller to the PC where the DMX software (included) was installed.

DMX line closure adapter

2. Connect the DMX ADDRESSER to the DMX line of the Starline to be addressed.

input

output

Bus DMX 512

120 Ohm

3. View all the serial numbers of the StarLine items.

89365

4. Switch on the bar corresponding to the first serial number and set the DMX address according to the group/area to be assigned to the bar. 5. Repeat step 4 for all the Starline bars creating as many addresses as the Master DMX in use can manage. 6. Disconnect the DMX controller and connect the chosen Master DMX i-LèD to the DMX bus.

Lines

723

Profile for Stockholm Lighting

i-LÈD Maestro 2016  

i-LÈD Maestro 2016