Issuu on Google+

MERIDIAN T r a n s m i t t e r s

The Meridian wireless microwave broadcast system is designed for high quality, uncompressed zero delay HD and SD live transmission, where extremely low latency is essential. Meridian transmitters have been specifically designed to be lightweight, compact and are available with either an Anton Bauer, V-lok battery mount, or without battery plates for mounting to a DV, Red or film camera.

Features • • • • • • • •

Zero frame delay HDSDI, SDI, component, composite video input Extremely high quality 4:2:2 video 5.1 - 5.9GHz licence and licence exempt band Secure encrypted transmission in unicast mode Removable antennas Lightweight design Switch between Anton Bauer and V-Lok plates

Specifications Latency: Video Input: Format: Audio Output: Transmission Method: Time Code: RF Power Output: Modulation: Bandwidth: Frequency: Security: Firmware: Antennas: Control: Power: Mounting: Size: Temperature Range: Made in:

<1 millisecond SDI, HD-SDI, component, composite SDI, PAL, NTSC. HD-SDI up to 1080i 60 2 channels embedded or balanced analogue line level Pixel Prioritisation Protocol Embedded time code transported over link Up to 100mW OFDM 20MHz 5.1 - 5.9GHz 256 bit encryption AES Upgradable via USB 4 x RP-TNC and 1 x RP-SMA (return data) Configuration via LCD touch screen 6.5 - 18V DC 9 Watts on 4 pin Hirose or battery plate Anton Bauer or V-Lok plates / no plates Approx. 155mm x 145mm x 38mm -5° to 50° C United Kingdom

Revolutionise the way you work UK Head Office +44 (0)845 643 2874 • www.boxx.tv • sales@boxx.tv


MERIDIAN Broadcast Receiver

Meridian broadcast receivers use an array of 5 receive antennas to enhance performance and reliability. With a range of accessories developed for performance and flexibility, this receiver can be tailored to meet a variety of production requirements. The Meridian receiver is ideal for multi camera production, sporting arenas, stage and studio productions, and live-to-air broadcasts.

Standard Features

Options

• • • • • • • • •

• Daisy-chain multiple receivers to increase range and coverage • Lens Iris control • Tally light relay – preview/programme • Built-in spectrum analyser • Genlock

Zero frame latency (<1 millisecond) 5.1-5.9GHz licence, and licence exempt band Extremely high quality 4:2:2 video transmission Embedded time code transport Manual or automatic channel select Switch between multiple cameras Secure encrypted transmission in unicast mode Simultaneous HD down-converter/scaler Signal strength meter on each antenna

Specifications Latency: Video Output: Format: Audio Output: Down-converter: Time Code: Transmission Method: Modulation: Bandwidth: Frequency: Antennas: Security: Firmware: Range: Channel Select: Control: Power: Antenna Ports: Temperature Range: Mounting: Made in:

<1 millisecond / 1 frame when Genlocked SDI, HDSDI, component SD/HD, composite SDI, PAL, NTSC. HDSDI up to 1080i Embedded and 2 channels balanced analogue line level Any HD format simultaneously converted to PAL or NTSC Embedded time code transported over link Pixel Prioritisation Protocol OFDM 20MHz 5.1-5.9GHz 7 antenna array. 5 receive, 1 spectrum analyser, 1 return data 256 bit encryption AES in unicast Upgradable via USB port Up to 200 metres line of sight Automatic or manual Configuration via LCD touch pad 6.5 -18V DC, 4 pin XLR, 9 watts N-type -5° to 50° C Light stand spigot or 1 unit rack mount United Kingdom

Revolutionise the way you work UK Head Office +44 (0)845 643 2874 • www.boxx.tv • sales@boxx.tv


MERIDIAN Portable Receiver Meridian portable receivers are designed to be lightweight, compact and are available with either an Anton Bauer, V-Lok battery mount or without battery plates. The antenna configuration of the portable receivers allows the operator to utilise a range of different antennas to optimise performance in a variery of environments.

Features • • • • • • • • •

Zero frame latency (<1 millisecond) 5.1-5.9GHz licence, and licence exempt band Extremely high quality 4:2:2 video transmission Embedded time code transport Manual or automatic channel select Switch between multiple cameras Simultaneous HD downconverter/scaler Lightweight design Headphone monitoring

Specifications Latency: Video output: Format: Audio output: Downconvertor: Time Code: Transmission method: Modulation: Bandwidth: Frequency: Range: Antennas: Channel select: Firmware: Control: Power: Size: Temperature Range: Made in:

<1 millisecond SDI, HDSDI, component SD/HD, composite SDI, PAL, NTSC, HDSDI up to 1080i Embedded and 2 channels balanced line analogue level (simultaneous output) 2 headphone monitor outputs HD format converted to PAL or NTSC Embedded time code transported over link Pixel Prioritisation Protocol OFDM 20MHz 5.1GHz - 5.9GHz Up to 60 metres with on-board antennas Up to 150 metres with hi-gain antennas 5 x RP-SMA connectors Automatic or manual Upgradable via USB port Configuration via LCD touch screen 6.5 - 18V DC 9 Watts on 4 pin Hirose Approx. 145mm x 155mm x 38mm -5° to 50° C United Kingdom

Revolutionise the way you work UK Head Office +44 (0)845 643 2874 • www.boxx.tv • sales@boxx.tv


MERIDIAN Full Telemetry System

The latest addition to the Meridian range offers a full telemetry solution using the manufacturer’s original Remote Control Panel (RCP). This bi-directional system enables the RCP to display F-stop and Pedestal level and provides the operator with a very low latency Camera Control solution. When used in conjunction with Meridian’s zero delay video transmission system, the RCP operator will encounter no perceptible difference between hard-wired and wireless cameras. The Meridian camera control system operates in standalone mode or can be integrated into a multi-camera OB or studio production environment.

HIGHLIGHTS • Complete wireless camera control solution • Uses camera manufacturer’s original RCP • Bi-directional data shows full feedback display information including F-stop and Pedestal level • Low-latency and long range • High-speed transceivers operate bi-directionally • Robust frequency-hopping/DTS

SPECIFICATIONS Range:

Up to 1 mile

Latency:

<30 milliseconds

Frequency:

900 MHz US 2.4 GHz worldwide

Power:

Up to 1 watt (adjustable)

Battery Mount:

No Plate, V-lok or Anton Bauer

Operating Temperature:

-20°C to +45°C (-4°F to +113 °F)

Power Requirements:

120/240 V AC or 12 V DC

Weight:

Approx. 2 lb 5 oz (1.05 kg)

Remote:

8-pin (not included)

Revolutionise the way you work UK Head Office +44 (0)845 643 2874 • www.boxx.tv • sales@boxx.tv


ZENITH The Zenith wireless system is designed for wireless ENG and HD live productions where range and signal reliability are essential. The unique network capability of the system allows for an almost infinite shooting area by deploying inexpensive receiver nodes wired with Category-5 cabling. The bandwith is adjustable (between 5-40MHz) and one of the strengths of the Zenith system is its ability to navigate around interference when operating in “wide-bandwith mode” making the link robust and extremely stable. Zenith is fully configurable via a Web interface and statistics can be monitored on portable devices (such as an iPhone©) allowing the operator the flexibility to configure the system for optimal HD wireless transmission within any environment. Zenith provides a scalable modular solution allowing trade offs between budget and performance.

Features • • • • • •

80 milliseconds latency 5.1 - 5.9GHz license-exempt band (approx. 20 x 10MHz channels available) Range from camera back transmitter up to 1km Range (pointo-to-point) up to 5km 1 - 30Mb encoding bitrate Configure and monitor statistics via web page using a laptop, iPad©, iPhone©, or other popular portable device • Secure encrypted transmission • LED signal strength meter on transmitter and receiver

Specifications Latency: Compression: Format: Audio Output: RF Power Output: Modulation: Bandwidth: Frequency: Security: Firmware: Antenna Port: Range: Temperature Range: Made In:

80 milliseconds H.264 SDI, HD-SDI, Composite up to 1080p 60 2 channels embedded or balanced analogue line level Up to 500mW adjustable OFDM 5 - 40MHz 5.1 - 5.9GHz 256 bit encryption AES Upgradable via Web page N-Type Up to 1km (camera back transmitter) Up to 5km (point-to-point) -5º to 50º C United Kingdom

E&OE: Details subject to change. Photos for illustration purposes only.

Revolutionise the way you work UK Head Office +44 (0)845 643 2874 • www.boxx.tv • sales@boxx.tv


C O B A LT

Robust SD Transmission

The Cobalt wireless microwave system is a unique solution providing live-to-air microwave links for any camera without ghosting, break-up or interference at a fraction of the cost of traditional digital microwave systems. With an existing worldwide broadcast user base, the Cobalt consistently provides a cost effective alternative to COFDM systems. So far as reliability is concerned, the Cobalt’s unique bi-directional transmission system ensures that each packet of data is acknowledged by the receiver. Thus any lost data can be requested and resent resulting in an extremely robust link.

Specifications Video:

MPEG-2 standard definition Composite / SDI NTSC / PAL auto select

Latency:

465ms

Audio:

2 channels

Data Rate:

Dynamically selects between 4/8/14 Mb/s

Frequency:

5GHz Wi-Fi channels

Transmission Method:

OFDM

Transmission Power:

50mW

Range:

Outdoors: Up to 1600ft/500m line of sight

Security:

AES 128 bit encryption

Channel Select:

Automatic. Up to 11 usable channels (4 recommended)

Power:

8-38V DC 6 Watts

Control :

Full manual override and configuration via RS-232 port

TX Mounting:

V-Lok, Anton Bauer, or no plates

RX Mounting:

Light stand mount, diversity antenna

Revolutionise the way you work UK Head Office +44 (0)845 643 2874 • www.boxx.tv • sales@boxx.tv


C O B A LT

 

OB Receiver Component Diagram

Antenna 01

ADP106

Antenna 02

Battery Mount Transmitter

Cobalt Outside Broadcast Receiver RC-0B-11C or RC-OB-11SDI

12V

CMP003

UK Head Office:

Composite or SDI

SDI with embedded audio

Sound Mixer

Camera Video Cable

Power Supply (110/240V) PS1201 Analogue Audio 2

Analogue Audio 1

CBL115

ST-OB-01

Monitor

Transmitter

Antenna 01 (ADP107)

Battery

Audio Cable Antenna 02 (ADP107)

Vision Mixer

+44 (0)845 643 2874

Fax:

+44 (0)207 900 6350

www.boxx.tv

sales@boxx.tv


TALLIS OPTION GUIDE Tally & Iris Control

Tally Control Only

TL-TM-2CH

TL-TM-5CH

Included Accessories 1 x PS1205: 90-264Vac 50/60Hz 12V DC 5Amp Power Supply

UK Head Office +44 (0)845 643 2874 • Fax:

1 x CBL109: 12-pin lens control cable 1 x CBL103: 4-pin Hirose to Anton 2-pin power tap cable 1 x TL-IR-CTRL: Iris Control Box 1 x CBL108: 3-pin XLR female to 3-pin XLR male cable

TL-TAL-T1

Additional Accessories

TL-DV-EXT

Included Accessories 1 x ANT107: 868MHz or 434MHz antenna short right angle antenna

Receiver Options

1 x CBL103: 4 pin Hirose to Anton 2 pin power tap cable.

Receiver Options Transmitter Options Additional Accessories

TL-TAL-R1

Included Accessories

Transmitter Options

TL-RM-01

Included Accessories 1 x ANT108: 868MHz long right angle antenna 1 x PS1205: 100-240v AC to 12V 2.5 amp adapter. 4-pin XLR 1 x ADP109: N-type male to RPSMA female adaptor

TL-DV-EXT

Note

TL-IR-CTRL

1 x TL-IR-CTRL: Iris Control Box is included in the price of a TL-TAL-R1, an additional unit would only need to be ordered as a replacement.

+ 4 4 ( 0 ) 2 0 7 9 0 0 6 3 5 0 • w w w. b o x x . t v • s a l e s @ b o x x . t v


CERULEAN

BACKHAUL LINK Cerulean delivers the quality and reliability of full HD uncompressed fibre links in a cable free, latency free, error free, wireless environment. The system utilises the licence-exempt 60GHz spectrum and is capable of sending two independent, uncompressed SMPTE 292M (SMPTE372M) production video streams simultaneously without the need for compression or forward error correction and the associated latency. This product is ideal for multiple camera feeds or as a redundant hot standby installation for critical real-time acquisition. With a range of up to 500m, Cerulean opens up a host of possibilities in HD uncompressed wireless transport for any production.

Features • • • • • • •

Operates on the 60GHz license-exempt spectrum Dual-channel operation supports 3D-HDTV or two single channels uncompressed SMPTE 292M 2.97Gbps aggregate throughput to 500 metres Error-free operation including all HDSDI pathological patterns Dielectrically loaded 5º lens antenna for high signal gain and manageable beam width Optical sight and RSSI bar graph for confirmation of optimal alignment Optical interface options available

Specifications Video/Audio: Video/Audio Inputs: Aggregate Throughput.: Bit Error Rate: Transport Latency: Transmitter Power: Antenna Gain: Operating Range: Power: Regulatory Approvals: Environmental: Size: Weight:

SMPTE 372M and SMPTE 292M Dual HD-SDI, BNC x 2 2.97Gbps, HD-SDI x 2 1.48Gbps, HD-SDI < 1 x 10-12 <2ns (30% < than fibre) +10dBm (10mW) 35dBi / 5º beam width 20 - 500 metres (clear to moderate rain) 10.5 - 17 VDC, 15W via XLR4 or V-Mount battery FCC Part 15.255, MPT (59-66Ghz) unlicensed 0º to 65º C, IP65 rated enclosure 240mm x 240mm x 120mm 5kg

Revolutionise the way you work UK Head Office +44 (0)845 643 2874 • www.boxx.tv • sales@boxx.tv


BOXX